-
First results on new helium based eco-gas mixtures for the Extreme Energy Events Project
Authors:
M. Abbrescia,
C. Avanzini,
L. Baldini,
R. Baldini Ferroli,
G. Batignani,
M. Battaglieri,
S. Boi,
E. Bossini,
F. Carnesecchi,
F. Cavazza,
C. Cicalò,
L. Cifarelli,
F. Coccetti,
E. Coccia,
A. Corvaglia,
D. De Gruttola,
S. De Pasquale,
L. Galante,
M. Garbini,
I. Gnesi,
F. Gramegna,
S. Grazzi,
D. Hatzifotiadou,
P. La Rocca,
Z. Liu
, et al. (36 additional authors not shown)
Abstract:
The Extreme Energy Events (EEE) Project, a joint project of the Centro Fermi (Museo Storico della Fisica e Centro Studi e Ricerche "E.Fermi") and INFN, has a dual purpose: a scientific research program on cosmic rays at ground level and an intense outreach and educational program. The project consists in a network of about 60 tracking detectors, called telescopes, mostly hosted in Italian High Sch…
▽ More
The Extreme Energy Events (EEE) Project, a joint project of the Centro Fermi (Museo Storico della Fisica e Centro Studi e Ricerche "E.Fermi") and INFN, has a dual purpose: a scientific research program on cosmic rays at ground level and an intense outreach and educational program. The project consists in a network of about 60 tracking detectors, called telescopes, mostly hosted in Italian High Schools. Each telescope is made by three Multigap Resistive Plate Chambers, operated so far with a gas mixture composed by 98% C$_2$H$_2$F$_4$ and 2% SF$_6$. Due to its high Global Warming Potential, a few years ago the EEE collaboration has started an extensive R&D on alternative mixtures environmentally sustainable and compatible with the current experimental setup and operational environment. Among other gas mixtures, the one with helium and hydrofluoroolefin R1234ze gave the best result during the preliminary tests performed with two of the network telescopes. The detector has proved to reach performance levels comparable to those obtained with previous mixtures, without any modification of the hardware. We will discuss the first results obtained with the new mixture, tested with different percentages of the two components.
△ Less
Submitted 3 August, 2024;
originally announced August 2024.
-
Plasma-Based Etching Approach for GEM Detector Microfabrication at FBK for X-ray polarimetry in space
Authors:
A. Lega,
D. Novel,
T. Facchinelli,
C. Sgro',
L. Baldini,
M. Minuti,
M. Boscardin,
G. Pepponi,
R. Iuppa,
R. Hall-Wilton,
L. Latronico
Abstract:
Gas Electron Multiplier (GEM) detectors are crucial for enabling high-resolution X-ray polarisation of astrophysical sources when coupled to custom pixel readout ASIC in Gas Pixel Detectors (GPD), as in the Imaging X-ray Polarimetry Explorer (IXPE), the Polarlight cubesat pathfinder and the PFA telescope onboard the future large enhanced X-ray Timing and Polarimetry (eXTP) Chinese mission. The R&D…
▽ More
Gas Electron Multiplier (GEM) detectors are crucial for enabling high-resolution X-ray polarisation of astrophysical sources when coupled to custom pixel readout ASIC in Gas Pixel Detectors (GPD), as in the Imaging X-ray Polarimetry Explorer (IXPE), the Polarlight cubesat pathfinder and the PFA telescope onboard the future large enhanced X-ray Timing and Polarimetry (eXTP) Chinese mission. The R&D efforts of the IXPE collaboration have resulted in mature GPD technology. However, limitations in the classical wet-etch or laser-drilled fabrication process of GEMs motivated our exploration of alternative methods. This work focuses on investigating a plasma-based etching approach for fabricating GEM patterns at Fondazione Bruno Kessler (FBK). The objective is to improve the aspect ratio of the GEM holes, to mitigate the charging of the GEM dielectric which generates rate-dependent gain changes. Unlike the traditional wet-etch process, Reactive Ion Etching (RIE) enables more vertical etching profiles and thus better aspect ratios. Moreover, the RIE process promises to overcome non-uniformities in the GEM hole patterns which are believed to cause systemic effects in the azimuthal response of GPDs equipped with either laser-drilled or wet-etch GEMs. We present a GEM geometry with 20 micrometers in diameter and 50 micrometers pitch, accompanied by extensive characterisation (SEM and PFIB) of the structural features and aspect ratios. The collaboration with INFN Pisa and Turin enabled us to compare the electrical properties of these detectors and test their performance in their use as electron multipliers in GPDs. Although this R&D work is in its initial stages, it holds promise for enhancing the sensitivity of the IXPE mission in X-ray polarimetry measurements through GEM pattern with more vertical hole profiles.
△ Less
Submitted 13 February, 2024; v1 submitted 12 December, 2023;
originally announced December 2023.
-
Ecological transition for the gas mixtures of the MRPC cosmic ray telescopes of the EEE Project
Authors:
C. Ripoli,
M. Abbrescia,
C. Avanzini,
L. Baldini,
R. Baldini Ferroli,
G. Batignani,
M. Battaglieri,
S. Boi,
E. Bossini,
F. Carnesecchi,
D. Cavazza,
C. Cicalò,
L. Cifarelli,
F. Coccetti,
E. Coccia,
A. Corvaglia,
D. De Gruttola,
S. De Pasquale,
L. Galante,
M. Garbini,
I. Gnesi,
E. Gramstad,
S. Grazzi,
E. S. Håland,
D. Hatzifotiadou
, et al. (40 additional authors not shown)
Abstract:
The Extreme Energy Events (EEE) Collaboration is fully involved in an ecological transition. The use of the standard gas mixture, \ce{C_{2}H_{2}F_{4}}+ \ce{SF_{6}}, has stopped in favor of an alternative green mixture based on \ce{C_{3}H_{2}F_{4}} with the addition of He or \ce{CO_{2}}. The choise of these new mixtures is motivated by the significant lower Global Warming Potential (GWP) to reduce…
▽ More
The Extreme Energy Events (EEE) Collaboration is fully involved in an ecological transition. The use of the standard gas mixture, \ce{C_{2}H_{2}F_{4}}+ \ce{SF_{6}}, has stopped in favor of an alternative green mixture based on \ce{C_{3}H_{2}F_{4}} with the addition of He or \ce{CO_{2}}. The choise of these new mixtures is motivated by the significant lower Global Warming Potential (GWP) to reduce the emission of gases potentially contributing to the greenhouse effect. The EEE experiment consists of 61 muon telescopes based on Multigap Resistive Plate Chambers (MRPCs), each telescope composed of 3 chambers filled with gas. Several EEE detectors are today completely fluxed with the new ecological mixture. This contribution will report recent results about the telescope performance obtained from studies with the eco-friendly alternative mixture carried out in the last years.
△ Less
Submitted 29 September, 2023;
originally announced September 2023.
-
Joint machine learning and analytic track reconstruction for X-ray polarimetry with gas pixel detectors
Authors:
Nicoló Cibrario,
Michela Negro,
Nikita Moriakov,
Raffaella Bonino,
Luca Baldini,
Niccoló Di Lalla,
Luca Latronico,
Simone Maldera,
Alberto Manfreda,
Nicola Omodei,
Carmelo Sgró,
Stefano Tugliani
Abstract:
We present our study on the reconstruction of photoelectron tracks in gas pixel detectors used for astrophysical X-ray polarimetry. Our work aims to maximize the performance of convolutional neural networks (CNNs) to predict the impact point of incoming X-rays from the image of the photoelectron track. A very high precision in the reconstruction of the impact point position is achieved thanks to t…
▽ More
We present our study on the reconstruction of photoelectron tracks in gas pixel detectors used for astrophysical X-ray polarimetry. Our work aims to maximize the performance of convolutional neural networks (CNNs) to predict the impact point of incoming X-rays from the image of the photoelectron track. A very high precision in the reconstruction of the impact point position is achieved thanks to the introduction of an artificial sharpening process of the images. We find that providing the CNN-predicted impact point as input to the state-of-the-art analytic analysis improves the modulation factor ($\sim 1 \%$ at 3 keV and $\sim 6 \%$ at 6 keV) and naturally mitigates a subtle effect appearing in polarization measurements of bright extended sources known as "polarization leakage".
△ Less
Submitted 27 April, 2023;
originally announced April 2023.
-
Equalizing the Pixel Response of the Imaging Photoelectric Polarimeter On-Board the IXPE Mission
Authors:
John Rankin,
Fabio Muleri,
Alessandro Di Marco,
Sergio Fabiani,
Fabio La Monaca,
Paolo Soffitta,
Matteo Bachetti,
Luca Baldini,
Enrico Costa,
Niccolò Di Lalla,
Alberto Manfreda,
Stephen L. O'Dell,
Matteo Perri,
Simonetta Puccetti,
Brian D. Ramsey,
Carmelo Sgrò,
Allyn F. Tennant,
Antonino Tobia,
Alessio Trois,
Martin C. Weisskopf,
Fei Xie
Abstract:
The Gas Pixel Detector is a gas detector, sensitive to the polarization of X-rays, currently flying on-board IXPE - the first observatory dedicated to X-ray polarimetry. It detects X-rays and their polarization by imaging the ionization tracks generated by photoelectrons absorbed in the sensitive volume, and then reconstructing the initial direction of the photoelectrons. The primary ionization ch…
▽ More
The Gas Pixel Detector is a gas detector, sensitive to the polarization of X-rays, currently flying on-board IXPE - the first observatory dedicated to X-ray polarimetry. It detects X-rays and their polarization by imaging the ionization tracks generated by photoelectrons absorbed in the sensitive volume, and then reconstructing the initial direction of the photoelectrons. The primary ionization charge is multiplied and ultimately collected on a finely-pixellated ASIC specifically developed for X-ray polarimetry. The signal of individual pixels is processed independently and gain variations can be substantial, of the order of 20%. Such variations need to be equalized to correctly reconstruct the track shape, and therefore its polarization direction. The method to do such equalization is presented here and is based on the comparison between the mean charge of a pixel with respect to the other pixels for equivalent events. The method is shown to finely equalize the response of the detectors on board IXPE, allowing a better track reconstruction and energy resolution, and can in principle be applied to any imaging detector based on tracks.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Characterization of cesium and H-/D- density in the negative ion source SPIDER
Authors:
Marco Barbisan,
R. Agnello,
L. Baldini,
G. Casati,
M. Fadone,
R. Pasqualotto,
A. Rizzolo,
E. Sartori,
G. Serianni
Abstract:
The Heating Neutral Beam Injectors (HNBs) for ITER will have to deliver 16.7 MW beams of H/D particles at 1 MeV energy. The beams will be produced from H-/D- ions, generated by a radiofrequency plasma source coupled to an ion acceleration system. A prototype of the ITER HNB ion source is being tested in the SPIDER experiment, part of the ITER Neutral Beam Test Facility at Consorzio RFX. Reaching t…
▽ More
The Heating Neutral Beam Injectors (HNBs) for ITER will have to deliver 16.7 MW beams of H/D particles at 1 MeV energy. The beams will be produced from H-/D- ions, generated by a radiofrequency plasma source coupled to an ion acceleration system. A prototype of the ITER HNB ion source is being tested in the SPIDER experiment, part of the ITER Neutral Beam Test Facility at Consorzio RFX. Reaching the design targets for beam current density and fraction of coextracted electrons is only possible by evaporating cesium in the source, in particular on the plasma facing grid (PG) of the acceleration system. In this way the work function of the surfaces decreases, significantly increasing the amount of surface reactions that convert neutrals and positive ions into H-/D-. It is then of paramount importance to monitor the density of negative ions and the density of Cs in the proximity of the PG. Monitoring the Cs spatial distribution along the PG is also essential to guarantee the uniformity of the beam current. In SPIDER, this is possible thanks to the Cavity Ringdown Spectroscopy (CRDS) and the Laser absorption Spectroscopy diagnostics (LAS), which provide line-integrated measurements of negative ion density and neutral, ground state Cs density, respectively. The paper discusses the CRDS and LAS measurements as a function of input power and of the magnetic and electric fields used to reduce the coextraction of electrons. Negative ion density data are in qualitative agreement with the analogous measurements in Cs-free conditions. In agreement with simulations, Cs density is peaked in the center of the source; a top/bottom non uniformity is also present. Several effects of plasma on Cs deposition and negative ion production are presented.
△ Less
Submitted 20 July, 2023; v1 submitted 3 November, 2022;
originally announced November 2022.
-
Design, Construction, and Test of the Gas Pixel Detectors for the IXPE Mission
Authors:
L. Baldini,
M. Barbanera,
R. Bellazzini,
R. Bonino,
F. Borotto,
A. Brez,
C. Caporale,
C. Cardelli,
S. Castellano,
M. Ceccanti,
S. Citraro,
N. Di Lalla,
L. Latronico,
L. Lucchesi,
C. Magazzù,
G. Magazzù,
S. Maldera,
A. Manfreda,
M. Marengo,
A. Marrocchesi,
P. Mereu,
M. Minuti,
F. Mosti,
H. Nasimi,
A. Nuti
, et al. (69 additional authors not shown)
Abstract:
Due to be launched in late 2021, the Imaging X-Ray Polarimetry Explorer (IXPE) is a NASA Small Explorer mission designed to perform polarization measurements in the 2-8 keV band, complemented with imaging, spectroscopy and timing capabilities. At the heart of the focal plane is a set of three polarization-sensitive Gas Pixel Detectors (GPD), each based on a custom ASIC acting as a charge-collectin…
▽ More
Due to be launched in late 2021, the Imaging X-Ray Polarimetry Explorer (IXPE) is a NASA Small Explorer mission designed to perform polarization measurements in the 2-8 keV band, complemented with imaging, spectroscopy and timing capabilities. At the heart of the focal plane is a set of three polarization-sensitive Gas Pixel Detectors (GPD), each based on a custom ASIC acting as a charge-collecting anode. In this paper we shall review the design, manufacturing, and test of the IXPE focal-plane detectors, with particular emphasis on the connection between the science drivers, the performance metrics and the operational aspects. We shall present a thorough characterization of the GPDs in terms of effective noise, trigger efficiency, dead time, uniformity of response, and spectral and polarimetric performance. In addition, we shall discuss in detail a number of instrumental effects that are relevant for high-level science analysis -- particularly as far as the response to unpolarized radiation and the stability in time are concerned.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
The cosmic muon and detector simulation framework of the Extreme Energy Events (EEE) experiment
Authors:
M. Abbrescia,
C. Avanzini,
L. Baldini,
R. Baldini Ferroli,
G. Batignani,
M. Battaglieri,
S. Boi,
E. Bossin,
F. Carnesecchi,
C. Cicalò,
L. Cifarelli,
F. Coccetti,
E. Coccia,
A. Corvaglia,
D. De Gruttola,
S. De Pasquale,
F. Fabbri,
A. Fulci,
L. Galante,
M. Garbini,
G. Gemme,
I. Gnesi,
S. Grazzi,
D. Hatzifotiadou,
P. La Rocca
, et al. (38 additional authors not shown)
Abstract:
This paper describes the simulation framework of the Extreme Energy Events (EEE) experiment. EEE is a network of cosmic muon trackers, each made of three Multi-gap Resistive Plate Chambers (MRPC), able to precisely measure the absolute muon crossing time and the muon integrated angular flux at the ground level. The response of a single MRPC and the combination of three chambers have been implement…
▽ More
This paper describes the simulation framework of the Extreme Energy Events (EEE) experiment. EEE is a network of cosmic muon trackers, each made of three Multi-gap Resistive Plate Chambers (MRPC), able to precisely measure the absolute muon crossing time and the muon integrated angular flux at the ground level. The response of a single MRPC and the combination of three chambers have been implemented in a GEANT4-based framework (GEMC) to study the telescope response. The detector geometry, as well as details about the surrounding materials and the location of the telescopes have been included in the simulations in order to realistically reproduce the experimental set-up of each telescope. A model based on the latest parametrization of the cosmic muon flux has been used to generate single muon events. After validating the framework by comparing simulations to selected EEE telescope data, it has been used to determine detector parameters not accessible by analysing experimental data only, such as detection efficiency, angular and spatial resolution.
△ Less
Submitted 13 April, 2021;
originally announced April 2021.
-
Detecting and quantifying palaeoseasonality in stalagmites using geochemical and modelling approaches
Authors:
James U. L. Baldini,
Franziska A. Lechleitner,
Sebastian F. M. Breitenbach,
Jeroen van Hunen,
Lisa M. Baldini,
Peter M. Wynn,
Robert A. Jamieson,
Harriet E. Ridley,
Alex J. Baker,
Izabela W. Walczak,
Jens Fohlmeister
Abstract:
Stalagmites are an extraordinarily powerful resource for the reconstruction of climatological palaeoseasonality. Here, we provide a comprehensive review of different types of seasonality preserved by stalagmites and methods for extracting this information. A new drip classification scheme is introduced, which facilitates the identification of stalagmites fed by seasonally responsive drips and whic…
▽ More
Stalagmites are an extraordinarily powerful resource for the reconstruction of climatological palaeoseasonality. Here, we provide a comprehensive review of different types of seasonality preserved by stalagmites and methods for extracting this information. A new drip classification scheme is introduced, which facilitates the identification of stalagmites fed by seasonally responsive drips and which highlights the wide variability in drip types feeding stalagmites. This hydrological variability, combined with seasonality in Earth atmospheric processes, meteoric precipitation, biological processes within the soil, and cave atmosphere composition means that every stalagmite retains a different and distinct (but correct) record of environmental conditions. Replication of a record is extremely useful but should not be expected unless comparing stalagmites affected by the same processes in the same proportion. A short overview of common microanalytical techniques is presented, and suggested best practice discussed. In addition to geochemical methods, a new modelling technique for extracting meteoric precipitation and temperature palaeoseasonality from stalagmite d18O data is discussed and tested with both synthetic and real-world datasets. Finally, world maps of temperature, meteoric precipitation amount, and meteoric precipitation oxygen isotope ratio seasonality are presented and discussed, with an aim of helping to identify regions most sensitive to shifts in seasonality.
△ Less
Submitted 12 January, 2021;
originally announced January 2021.
-
Strategies to reduce the environmental impact in the MRPC array of the EEE experiment
Authors:
M. P. Panetta,
M. Abbrescia,
C. Avanzini,
L. Baldini,
R. Baldini Ferroli,
G. Batignani,
M. Battaglieri,
S. Boi,
E. Bossini,
F. Carnesecchi,
C. Cicalò,
L. Cifarelli,
F. Coccetti,
E. Coccia,
A. Corvaglia,
D. De Gruttola,
S. De Pasquale,
F. Fabbri,
D. Falchieri,
L. Galante,
M. Garbini,
G. Gemme,
I. Gnesi,
S. Grazzi,
D. Hatzifotiadou
, et al. (39 additional authors not shown)
Abstract:
The Extreme Energy Events (EEE) Project employs Multi-gap Resistive Plate Chamber (MRPC) for studying the secondary cosmic ray muons in Extensive Air Showers. The array consists of about 60 tracking detectors, sparse on Italian territory and at CERN. The MRPCs are flowed with a gas mixture based on $C_2H_2F_4$ and $SF_6$, both of which are fluorinated greenhouse gases with a high environmental imp…
▽ More
The Extreme Energy Events (EEE) Project employs Multi-gap Resistive Plate Chamber (MRPC) for studying the secondary cosmic ray muons in Extensive Air Showers. The array consists of about 60 tracking detectors, sparse on Italian territory and at CERN. The MRPCs are flowed with a gas mixture based on $C_2H_2F_4$ and $SF_6$, both of which are fluorinated greenhouse gases with a high environmental impact on the atmosphere. Due to the restrictions imposed by the European Union, these gases are being phased out of production and their cost is largely increasing. The EEE Collaboration started a campaign to reduce the gas emission from its array with the aim of containing costs and decreasing the experiment global warming impact. One method is to reduce the gas rate in each EEE detector. Another is to develop a gas recirculation system, whose a first prototype has been installed at one of the EEE stations located at CERN. Jointly a parallel strategy is focused on searching for environmental friendly gas mixtures which are able to substitute the standard mixture without affecting the MRPC performance. An overview and first results are presented here.
△ Less
Submitted 4 August, 2020; v1 submitted 30 June, 2020;
originally announced June 2020.
-
Characteristics and performance of the Multigap Resistive Plate Chambers of the EEE experiment
Authors:
F. Coccetti,
M. Abbrescia,
C. Avanzini,
L. Baldini,
R. Baldini Ferroli,
G. Batignani,
M. Battaglieri,
S. Boi,
E. Bossini,
F. Carnesecchi,
C. Cicalò,
L. Cifarelli,
E. Coccia,
A. Corvaglia,
D. De Gruttola,
S. De Pasquale,
F. Fabbri,
D. Falchieri,
L. Galante,
M. Garbini,
G. Gemme,
I. Gnesi,
S. Grazzi,
D. Hatzifotiadou,
P. La Rocca
, et al. (39 additional authors not shown)
Abstract:
The Extreme Energy Events (EEE) experiment, dedicated to the study of secondary cosmic rays, is arguably the largest detector system in the world implemented by Multigap Resistive Plate Chambers. The EEE network consists of 60 telescopes distributed over all the Italian territory; each telescope is made of three MRPCs and allows to reconstruct the trajectory of cosmic muons with high efficiency an…
▽ More
The Extreme Energy Events (EEE) experiment, dedicated to the study of secondary cosmic rays, is arguably the largest detector system in the world implemented by Multigap Resistive Plate Chambers. The EEE network consists of 60 telescopes distributed over all the Italian territory; each telescope is made of three MRPCs and allows to reconstruct the trajectory of cosmic muons with high efficiency and optimal angular resolution. A distinctive feature of the EEE network is that almost all telescopes are housed in High Schools and managed by groups of students and teachers, who previously took care of their construction at CERN. This peculiarity is a big plus for the experiment, which combines the scientific relevance of its objectives with effective outreach activities. The unconventional location of the detectors, mainly in standard classrooms of school buildings, with heterogeneous maintenance conditions and without controlled temperature and dedicated power lines, is a unique test field to verify the robustness, the low aging characteristics and the long-lasting performance of MRPC technology for particle monitoring and timing. Finally, it is reported how the spatial resolution, efficiency, tracking capability and stability of these chambers behave in time.
△ Less
Submitted 4 June, 2020; v1 submitted 2 June, 2020;
originally announced June 2020.
-
A simulation tool for MRPC telescopes of the EEE project
Authors:
G. Mandaglio,
M. Abbrescia,
C. Avanzini,
L. Baldini,
R. Baldini Ferroli,
G. Batignani,
M. Battaglieri,
S. Boi,
E. Bossin,
F. Carnesecchi,
C. Cicalò,
L. Cifarelli,
F. Coccetti,
E. Coccia,
A. Corvaglia,
D. De Gruttola,
S. De Pasquale,
F. Fabbri,
A. Fulci,
D. Falchieri,
L. Galante,
M. Garbini,
G. Gemme,
I. Gnesi,
S. Grazzi
, et al. (41 additional authors not shown)
Abstract:
The Extreme Energy Events (EEE) Project is mainly devoted to the study of the secondary cosmic ray radiation by using muon tracker telescopes made of three Multigap Resistive Plate Chambers (MRPC) each. The experiment consists of a telescope network mainly distributed across Italy, hosted in different building structures pertaining to high schools, universities and research centers. Therefore, the…
▽ More
The Extreme Energy Events (EEE) Project is mainly devoted to the study of the secondary cosmic ray radiation by using muon tracker telescopes made of three Multigap Resistive Plate Chambers (MRPC) each. The experiment consists of a telescope network mainly distributed across Italy, hosted in different building structures pertaining to high schools, universities and research centers. Therefore, the possibility to take into account the effects of these structures on collected data is important for the large physics programme of the project. A simulation tool, based on GEANT4 and using GEMC framework, has been implemented to take into account the muon interaction with EEE telescopes and to estimate the effects on data of the structures surrounding the experimental apparata.A dedicated event generator producing realistic muon distributions, detailed geometry and microscopic behavior of MRPCs have been included to produce experimental-like data. The comparison between simulated and experimental data, and the estimation of detector resolutions is here presented and discussed.
△ Less
Submitted 17 July, 2020; v1 submitted 29 May, 2020;
originally announced May 2020.
-
MRPC Telescope Simulation for the Extreme Energy Events Experiment
Authors:
G. Mandaglio,
M. Abbrescia,
C. Avanzini,
L. Baldini,
R. Baldini Ferroli,
G. Batignani,
M. Battaglieri,
S. Boi,
E. Bossini,
F. Carnesecchi,
C. Cicalò,
L. Cifarelli,
F. Coccetti,
E. Coccia,
A. Corvaglia,
D. De Gruttola,
S. De Pasquale,
F. Fabbri,
A. Fulci,
L. Galante,
P. Galeotti,
M. Garbini,
G. Gemme,
I. Gnesi,
S. Grazzi
, et al. (39 additional authors not shown)
Abstract:
A simulation tool based on GEMC framework to describe the MRPC telescope of the Extreme Energy Events (EEE) Project is presented. The EEE experiment is mainly devoted to the study of the secondary cosmic muons by using MRPC telescope distributed in high schools and research centres in Italy and at CERN. This takes into account the muon interactions with EEE telescopes and the structures surroundin…
▽ More
A simulation tool based on GEMC framework to describe the MRPC telescope of the Extreme Energy Events (EEE) Project is presented. The EEE experiment is mainly devoted to the study of the secondary cosmic muons by using MRPC telescope distributed in high schools and research centres in Italy and at CERN. This takes into account the muon interactions with EEE telescopes and the structures surrounding the experimental apparata; it consists of a dedicated event generator producing realistic muon distribution and a detailed geometry description of the detector. Microscopic behaviour of MRPCs has been included to produce experimental-like data. A method to estimate the chamber effciency directly from data has been implemented and tested by comparing the experimental and simulated polar angle distribution of muons.
△ Less
Submitted 21 April, 2020; v1 submitted 18 April, 2020;
originally announced April 2020.
-
Mu2e calorimeter readout system
Authors:
N. Atanov,
V. Baranov,
L. Baldini,
J. Budagov,
D. Caiulo,
F. Cei,
F. Cervelli,
F. Colao,
M. Cordelli,
G. Corradi,
Yu. I. Davydov,
F. D'Errico,
S. Di Falco,
E. Diociaiuti,
S. Donati,
R. Donghia,
B. Echenard,
S. Faetti,
S. Giovannella,
S. Giudici,
V. Glagolev,
F. Grancagnolo,
F. Happacher,
D. G. Hitlin,
L. Lazzeri
, et al. (21 additional authors not shown)
Abstract:
The Mu2e electromagnetic calorimeter is made of two disks of un-doped parallelepiped CsI crystals readout by SiPM. There are 674 crystals in one disk and each crystal is readout by an array of two SiPM. The readout electronics is composed of two types of modules: 1) the front-end module hosts the shaping amplifier and the high voltage linear regulator; since one front-end module is interfaced to o…
▽ More
The Mu2e electromagnetic calorimeter is made of two disks of un-doped parallelepiped CsI crystals readout by SiPM. There are 674 crystals in one disk and each crystal is readout by an array of two SiPM. The readout electronics is composed of two types of modules: 1) the front-end module hosts the shaping amplifier and the high voltage linear regulator; since one front-end module is interfaced to one SiPM, a total of 2696 modules are needed for the entire calorimeter; 2) a waveform digitizer provides a further level of amplification and digitizes the SiPM signal at the sampling frequency of $200\ \text{M}\text{Hz}$ with 12-bits ADC resolution; since one board digitizes the data received from 20 SiPMs, a total of 136 boards are needed. The readout system operational conditions are hostile: ionization dose of $20\ \text{krads}$, neutron flux of $10^{12}\ \mathrm{n}(1\ \text{MeVeq})/\text{cm}^2$, magnetic field of $1\ \text{T}$ and in vacuum level of $10^{-4}\ \text{Torr}$. A description of the readout system and qualification tests is reported.
△ Less
Submitted 9 July, 2019;
originally announced July 2019.
-
New Eco-gas mixtures for the Extreme Energy Events MRPCs: results and plans
Authors:
S. Pisano,
M. Abbrescia,
C. Avanzini,
L. Baldini Ferroli,
L. Baldini,
G. Batignani,
M. Battaglieri,
S. Boi,
E. Bossini,
F. Carnesecchi,
A. Chiavassa,
C. Cicalo,
L. Cifarelli,
F. Coccetti,
E. Coccia,
A. Corvaglia,
D. De Gruttola,
S. De Pasquale,
F. L. Fabbri,
V. Frolov,
L. Galante,
P. Galeotti,
M. Garbini,
G. Gemme,
I. Gnesi
, et al. (42 additional authors not shown)
Abstract:
The Extreme Energy Events observatory is an extended muon telescope array, covering more than 10 degrees both in latitude and longitude. Its 59 muon telescopes are equipped with tracking detectors based on Multigap Resistive Plate Chamber technology with time resolution of the order of a few hundred picoseconds. The recent restrictions on greenhouse gases demand studies for new gas mixtures in com…
▽ More
The Extreme Energy Events observatory is an extended muon telescope array, covering more than 10 degrees both in latitude and longitude. Its 59 muon telescopes are equipped with tracking detectors based on Multigap Resistive Plate Chamber technology with time resolution of the order of a few hundred picoseconds. The recent restrictions on greenhouse gases demand studies for new gas mixtures in compliance with the relative requirements. Tetrafluoropropene is one of the candidates for tetrafluoroethane substitution, since it is characterized by a Global Warming Power around 300 times lower than the gas mixtures used up to now. Several mixtures have been tested, measuring efficiency curves, charge distributions, streamer fractions and time resolutions. Results are presented for the whole set of mixtures and operating conditions, %. A set of tests on a real EEE telescope, with cosmic muons, are being performed at the CERN-01 EEE telescope. The tests are focusing on identifying a mixture with good performance at the low rates typical of an EEE telescope.
△ Less
Submitted 22 May, 2019; v1 submitted 11 June, 2018;
originally announced June 2018.
-
First results from the upgrade of the Extreme Energy Events experiment
Authors:
M. Abbrescia,
C. Avanzini,
L. Baldini,
R. Baldini Ferroli,
G. Batignani,
M. Battaglieri,
S. Boi,
E. Bossini,
F. Carnesecchi,
A. Chiavassa,
C. Cicalo,
L. Cifarelli,
F. Coccetti,
E. Coccia,
A. Corvaglia,
D. De Gruttola,
S. De Pasquale,
L. Fabbri,
V. Frolov,
L. Galante,
P. Galeotti,
M. Garbini,
G. Gemme,
I. Gnesi,
S. Grazzi
, et al. (41 additional authors not shown)
Abstract:
The Extreme Energy Events (EEE) experiment is the largest system in the world completely implemented with Multigap Resistive Plate Chambers (MRPCs). Presently, it consists of a network of 59 muon telescopes, each made of 3 MRPCs, devoted to the study of secondary cosmic rays. Its stations, sometimes hundreds of kilometers apart, are synchronized at a few nanoseconds level via a clock signal delive…
▽ More
The Extreme Energy Events (EEE) experiment is the largest system in the world completely implemented with Multigap Resistive Plate Chambers (MRPCs). Presently, it consists of a network of 59 muon telescopes, each made of 3 MRPCs, devoted to the study of secondary cosmic rays. Its stations, sometimes hundreds of kilometers apart, are synchronized at a few nanoseconds level via a clock signal delivered by the Global Positioning System. The data collected during centrally coordinated runs are sent to INFN CNAF, the largest center for scientific computing in Italy, where they are reconstructed and made available for analysis. Thanks to the on-line monitoring and data transmission, EEE operates as a single coordinated system spread over an area of about $3 \times 10^5$ km$^2$.
In 2017, the EEE collaboration started an important upgrade program, aiming to extend the network with 20 additional stations, with the option to have more in the future. This implies the construction, testing and commissioning of 60 chambers, for a total detector surface of around 80 m$^2$. In this paper, aspects related to this challenging endeavor are covered, starting from the technological solutions chosen to build these state-of-the-art detectors, to the quality controls and the performance tests carried on.
△ Less
Submitted 11 June, 2018;
originally announced June 2018.
-
Performance of the Multigap Resistive Plate Chambers of the Extreme Energy Events Project
Authors:
D. De Gruttola,
M. Abbrescia,
C. Avanzini,
L. Baldini,
R. Baldini Ferroli,
G. Batignani,
M. Battaglieri,
S. Boi,
E. Bossini,
F. Carnesecchi,
A. Chiavassa,
C. Cicalo,
L. Cifarelli,
F. Coccetti,
E. Coccia,
A. Corvaglia,
S. De Pasquale,
F. L. Fabbri,
V. Frolov,
L. Galante,
P. Galeotti,
M. Garbini,
G. Gemme,
I. Gnesi,
S. Grazzi
, et al. (42 additional authors not shown)
Abstract:
The muon telescopes of the Extreme Energy Events (EEE) Project are made of three Multigap Resistive Plate Chambers (MRPC). The EEE array is composed, so far, of 59 telescopes and is organized in clusters and single telescope stations distributed all over the Italian territory. They are installed in High Schools with the aim to join research and teaching activities, by involving researchers, teache…
▽ More
The muon telescopes of the Extreme Energy Events (EEE) Project are made of three Multigap Resistive Plate Chambers (MRPC). The EEE array is composed, so far, of 59 telescopes and is organized in clusters and single telescope stations distributed all over the Italian territory. They are installed in High Schools with the aim to join research and teaching activities, by involving researchers, teachers and students in the construction, maintenance, data taking and data analysis. The unconventional working sites, mainly school buildings with non-controlled environmental parameters and heterogeneous maintenance conditions, are a unique test field for checking the robustness, the low-ageing features and the long-lasting performance of the MRPC technology for particle tracking and timing purposes. The measurements performed with the EEE array require excellent performance in terms of time and spatial resolution, efficiency, tracking capability and stability. The data from two recent coordinated data taking periods, named Run 2 and Run 3, have been used to measure these quantities and the results are described, together with a comparison with expectations and with the results from a beam test performed in 2006 at CERN.
△ Less
Submitted 11 June, 2018;
originally announced June 2018.
-
The Extreme Energy Events experiment: an overview of the telescopes performance
Authors:
M. Abbrescia,
C. Avanzini,
L. Baldini Ferroli,
L. Baldini,
G. Batignani,
M. Battaglieri,
S. Boi,
E. Bossini,
F. Carnesecchi,
A. Chiavassa,
C. Cicalo,
L. Cifarelli,
F. Coccetti,
E. Coccia,
A. Corvaglia,
D. De Gruttola,
S. De Pasquale,
F. L. Fabbri,
V. Frolov,
L. Galante,
P. Galeotti,
M. Garbini,
G. Gemme,
I. Gnesi,
S. Grazzi
, et al. (42 additional authors not shown)
Abstract:
Multigap Resistive Plate Chambers (MRPC). The EEE network is composed, so far, of 53 telescopes, each made of three MRPC detectors; it is organized in clusters and single telescope stations distributed all over the Italian territory and installed in High Schools, covering an area larger than $3\times10^{5}$ km$^{2}$. The study of Extensive Air Showers (EAS), that is one of the goal of the project,…
▽ More
Multigap Resistive Plate Chambers (MRPC). The EEE network is composed, so far, of 53 telescopes, each made of three MRPC detectors; it is organized in clusters and single telescope stations distributed all over the Italian territory and installed in High Schools, covering an area larger than $3\times10^{5}$ km$^{2}$. The study of Extensive Air Showers (EAS), that is one of the goal of the project, requires excellent performance in terms of time and spatial resolution, efficiency, tracking capability and long term stability. The data from two recent coordinated data taking periods, named Run 2 and Run 3, have been used to measure these quantities and the results are here reported, together with a comparison with expectations and with the results from a beam test performed in 2006 at CERN.
△ Less
Submitted 10 May, 2018;
originally announced May 2018.
-
Plasduino: an inexpensive, general purpose data acquisition framework for educational experiments
Authors:
L. Baldini,
C. Sgrò,
E. Andreoni,
F. Angelini,
A. Bianchi,
J. Bregeon,
F . Fidecaro,
M. M. Massai,
V. Merlin,
J. Nespolo,
S. Orselli,
M. Pesce-Rollins
Abstract:
Based on the Arduino development platform, Plasduino is an open-source data acquisition framework specifically designed for educational physics experiments. The source code, schematics and documentation are in the public domain under a GPL license and the system, streamlined for low cost and ease of use, can be replicated on the scale of a typical didactic lab with minimal effort. We describe the…
▽ More
Based on the Arduino development platform, Plasduino is an open-source data acquisition framework specifically designed for educational physics experiments. The source code, schematics and documentation are in the public domain under a GPL license and the system, streamlined for low cost and ease of use, can be replicated on the scale of a typical didactic lab with minimal effort. We describe the basic architecture of the system and illustrate its potential with some real-life examples.
△ Less
Submitted 26 August, 2014; v1 submitted 6 December, 2013;
originally announced December 2013.
-
Imaging with the invisible light
Authors:
R. Bellazzini,
G. Spandre,
A. Brez,
M. Minuti,
L. Baldini,
L. Latronico,
M. M. Massai,
N. Omodei,
M. Pesce-Rollins,
C Sgró,
M. Razzano,
M. Pinchera,
J. Bregeon,
M. Kuss,
A. Braem
Abstract:
We describe a UV photo-detector with single photon(electron) counting and imaging capability. It is based on a CsI photocathode, a GEM charge multiplier and a self triggering CMOS analog pixel chip with 105k pixels at 50 micron pitch. The single photoelectron produced by the absorption of a UV photon is drifted to and multiplied inside a single GEM hole. The coordinates of the GEM avalanche are…
▽ More
We describe a UV photo-detector with single photon(electron) counting and imaging capability. It is based on a CsI photocathode, a GEM charge multiplier and a self triggering CMOS analog pixel chip with 105k pixels at 50 micron pitch. The single photoelectron produced by the absorption of a UV photon is drifted to and multiplied inside a single GEM hole. The coordinates of the GEM avalanche are reconstructed with high accuracy (4 micron rms) by the pixel chip. As a result the map of the GEM holes, arranged on a triangular pattern at 50micron pitch, is finely imaged.
△ Less
Submitted 20 March, 2007; v1 submitted 19 March, 2007;
originally announced March 2007.
-
A Sealed Gas Pixel Detector for X-ray Astronomy
Authors:
R. Bellazzini,
G. Spandre,
M. Minuti,
L. Baldini,
A. Brez,
L. Latronico,
N. Omodei,
M. Razzano,
M. M. Massai,
M. Pinchera,
M. Pesce-Rollins,
C. Sgro,
E. Costa,
P. Soffitta,
H. Sipila,
E. Lempinen
Abstract:
We report on the results of a new, sealed, Gas Pixel Detector. The very compact design and the absence of the gas flow system, make this detector substantially ready for use as focal plane detector for future X-ray space telescopes. The instrument brings high sensitivity to X-ray polarimetry, which is the last unexplored field of X-ray astronomy. It derives the polarization information from the…
▽ More
We report on the results of a new, sealed, Gas Pixel Detector. The very compact design and the absence of the gas flow system, make this detector substantially ready for use as focal plane detector for future X-ray space telescopes. The instrument brings high sensitivity to X-ray polarimetry, which is the last unexplored field of X-ray astronomy. It derives the polarization information from the track of the photoelectrons that are imaged by a high gain (>1000), fine pitch GEM that matches the pitch of a pixel ASIC which is the collecting anode of the GPD (105k, 50 micron wide, hexagonal cells). The device is able to simultaneously perform good imaging (50-60 micron), moderate spectroscopy (~15% at 6 keV) as well as fast, high rate timing in the 1-10keV range. Moreover, being truly 2D, it is non dispersive and does not require any rotation. The great improvement of sensitivity, at least two orders of magnitude with respect to traditional polarimeters (based on Bragg crystals or Thomson scattering), will allow the direct exploration of the most dramatic objects of the X-ray sky. At the focus of the large mirror area of the XEUS telescope it will be decisive in reaching many of the scientific goals of the mission. With integration times of the order of one day, polarimetry of Active Galactic Nuclei at the per cent level will be possible, making for a real breakthrough in high energy astrophysics.
△ Less
Submitted 20 November, 2006; v1 submitted 16 November, 2006;
originally announced November 2006.
-
Direct reading of charge multipliers with a self-triggering CMOS analog chip with 105k pixels at 50 micron pitch
Authors:
R. Bellazzini,
G. Spandre,
M. Minuti,
L. Baldini,
A. Brez,
F. Cavalca,
L. Latronico,
N. Omodei,
M. M. Massai,
C. Sgro,
E. Costa,
P. Soffitta F. Krummenacher,
R. DeOliveira
Abstract:
We report on a large active area (15x15mm2), high channel density (470 pixels/mm2), self-triggering CMOS analog chip that we have developed as pixelized charge collecting electrode of a Micropattern Gas Detector. This device, which represents a big step forward both in terms of size and performance, is the last version of three generations of custom ASICs of increasing complexity. The CMOS pixel…
▽ More
We report on a large active area (15x15mm2), high channel density (470 pixels/mm2), self-triggering CMOS analog chip that we have developed as pixelized charge collecting electrode of a Micropattern Gas Detector. This device, which represents a big step forward both in terms of size and performance, is the last version of three generations of custom ASICs of increasing complexity. The CMOS pixel array has the top metal layer patterned in a matrix of 105600 hexagonal pixels at 50 micron pitch. Each pixel is directly connected to the underneath full electronics chain which has been realized in the remaining five metal and two poly-silicon layers of a 0.18 micron VLSI technology. The chip has customizable self-triggering capability and includes a signal pre-processing function for the automatic localization of the event coordinates. In this way it is possible to reduce significantly the readout time and the data volume by limiting the signal output only to those pixels belonging to the region of interest. The very small pixel area and the use of a deep sub-micron CMOS technology has brought the noise down to 50 electrons ENC. Results from in depth tests of this device when coupled to a fine pitch (50 micron on a triangular pattern) Gas Electron Multiplier are presented. The matching of readout and gas amplification pitch allows to get optimal results. The application of this detector for Astronomical X-Ray Polarimetry is discussed. The experimental detector response to polarized and unpolarized X-ray radiation when working with two gas mixtures and two different photon energies is shown. Results from a full MonteCarlo simulation for several galactic and extragalactic atronomical sources are also reported.
△ Less
Submitted 26 April, 2006; v1 submitted 14 April, 2006;
originally announced April 2006.
-
Gas Pixel Detectors for X-ray Polarimetry applications
Authors:
R. Bellazzini,
F. Angelini,
L. Baldini,
F. Bitti,
A. Brez,
F. Cavalca,
M. Del Prete,
M. Kuss,
L. Latronico,
N. Omodei,
M. Pinchera,
M. M. Massai,
M. Minuti,
M. Razzano,
C. Sgro,
G. Spandre,
A. Tenze,
E. Costa,
P. Soffitta
Abstract:
We discuss a new class of Micro Pattern Gas Detectors, the Gas Pixel Detector (GPD), in which a complete integration between the gas amplification structure and the read-out electronics has been reached. An Application-Specific Integrated Circuit (ASIC) built in deep sub-micron technology has been developed to realize a monolithic device that is, at the same time, the pixelized charge collecting…
▽ More
We discuss a new class of Micro Pattern Gas Detectors, the Gas Pixel Detector (GPD), in which a complete integration between the gas amplification structure and the read-out electronics has been reached. An Application-Specific Integrated Circuit (ASIC) built in deep sub-micron technology has been developed to realize a monolithic device that is, at the same time, the pixelized charge collecting electrode and the amplifying, shaping and charge measuring front-end electronics. The CMOS chip has the top metal layer patterned in a matrix of 80 micron pitch hexagonal pixels, each of them directly connected to the underneath electronics chain which has been realized in the remaining five layers of the 0.35 micron VLSI technology. Results from tests of a first prototype of such detector with 2k pixels and a full scale version with 22k pixels are presented. The application of this device for Astronomical X-Ray Polarimetry is discussed. The experimental detector response to polarized and unpolarized X-ray radiation is shown. Results from a full MonteCarlo simulation for two astronomical sources, the Crab Nebula and the Hercules X1, are also reported.
△ Less
Submitted 8 February, 2006; v1 submitted 9 December, 2005;
originally announced December 2005.
-
Reading a GEM with a VLSI pixel ASIC used as a direct charge collecting anode
Authors:
R. Bellazzini,
F. Angelini,
L. Baldini,
F. Bitti,
A. Brez,
L. Latronico,
M. M. Massai,
M. Minuti,
N. Omodei,
M. Razzano,
C. Sgro,
G. Spandre,
E. Costa,
P. Soffitta
Abstract:
In MicroPattern Gas Detectors (MPGD) when the pixel size is below 100 micron and the number of pixels is large (above 1000) it is virtually impossible to use the conventional PCB read-out approach to bring the signal charge from the individual pixel to the external electronics chain. For this reason a custom CMOS array of 2101 active pixels with 80 micron pitch, directly used as the charge colle…
▽ More
In MicroPattern Gas Detectors (MPGD) when the pixel size is below 100 micron and the number of pixels is large (above 1000) it is virtually impossible to use the conventional PCB read-out approach to bring the signal charge from the individual pixel to the external electronics chain. For this reason a custom CMOS array of 2101 active pixels with 80 micron pitch, directly used as the charge collecting anode of a GEM amplifying structure, has been developed and built. Each charge collecting pad, hexagonally shaped, realized using the top metal layer of a deep submicron VLSI technology is individually connected to a full electronics chain (pre-amplifier, shaping-amplifier, sample and hold, multiplexer) which is built immediately below it by using the remaining five active layers. The GEM and the drift electrode window are assembled directly over the chip so the ASIC itself becomes the pixelized anode of a MicroPattern Gas Detector. With this approach, for the first time, gas detectors have reached the level of integration and resolution typical of solid state pixel detectors. Results from the first tests of this new read-out concept are presented. An Astronomical X-Ray Polarimetry application is also discussed.
△ Less
Submitted 1 March, 2004;
originally announced March 2004.
