-
Controlling Tip Vortices and Cavitation through Tip Permeability for Tidal Turbines
Authors:
Yabin Liu,
Junchen Tan,
Richard H. J. Willden,
Paul Gary Tucker,
Ignazio Maria Viola
Abstract:
Blade-tip vortices can lead to wakes, cavitation and noise, and their control remains a significant challenge for tidal and wind turbines. In the present work, we propose and investigate controlling tip vortices through local permeability. Blade-resolved Reynolds-averaged Navier-Stokes simulation has been employed on a model-scale horizontal-axis turbine, following a rigorous validation and verifi…
▽ More
Blade-tip vortices can lead to wakes, cavitation and noise, and their control remains a significant challenge for tidal and wind turbines. In the present work, we propose and investigate controlling tip vortices through local permeability. Blade-resolved Reynolds-averaged Navier-Stokes simulation has been employed on a model-scale horizontal-axis turbine, following a rigorous validation and verification process. The tip-speed ratio of the turbine varies from 4.52 to 7.54. The tip permeability is modelled by including a porous zone over the blade tip section, within which Darcy's law is applied. The results demonstrate that there is an optimal range of permeability, corresponding to a non-dimensional Darcy number, Da, of around 10^{-5}, that can substantially decrease the tip vortex intensity. The revealed flow physics show that the permeable tip treatment can effectively enlarge the vortex viscous core radius with little change to the vortex circulation. As the tip vortex intensity is significantly reduced, the permeable tip treatment can increase the minimal pressure-coefficient at the vortex core by up to 63%, which significantly alleviates the cavitation risk due to tip vortices. This approach has negligible influence on the turbine's energy-harvesting performance because the spanwise extent of the permeable tip treatment is only in the order of 0.1% turbine diameter. Our findings demonstrate this approach's great promise to break the upper tip-speed ratio limit capped by cavitation for tidal turbines. These will contribute to developing more efficient and resilient turbines.
△ Less
Submitted 29 August, 2024;
originally announced August 2024.
-
3D-printed axicon enables extended depth-of-focus intravascular optical coherence tomography
Authors:
Pavel Ruchka,
Alok Kushwaha,
Jessica A. Marathe,
Lei Xiang,
Rouyan Chen,
Rodney Kirk,
Joanne T. M. Tan,
Christina A. Bursill,
Johan Verjans,
Simon Thiele,
Robert Fitridge,
Robert A. McLaughlin,
Peter J. Psaltis,
Harald Giessen,
Jiawen Li
Abstract:
A fundamental challenge in endoscopy is how to fabricate a small fiber-optic probe that can achieve comparable function to probes with large, complicated optics (e.g., high resolution and extended depth of focus). To achieve high resolution over an extended depth of focus (DOF), the application of needle-like beams has been proposed. However, existing methods using miniaturized needle beam designs…
▽ More
A fundamental challenge in endoscopy is how to fabricate a small fiber-optic probe that can achieve comparable function to probes with large, complicated optics (e.g., high resolution and extended depth of focus). To achieve high resolution over an extended depth of focus (DOF), the application of needle-like beams has been proposed. However, existing methods using miniaturized needle beam designs fail to adequately correct astigmatism and other monochromatic aberrations, limiting the resolution of at least one axis. Here, we describe a novel approach to realize freeform beam-shaping endoscopic probes via two-photon direct laser writing, also known as micro 3D-printing. We present a design achieving approximately 8-micron resolution with a DOF of >0.8 mm at a central wavelength of 1310 nm. The probe has a diameter of 0.25 mm (without the catheter sheaths) and is fabricated using a single printing step directly on the optical fiber. We demonstrate our device in intravascular imaging of living atherosclerotic pigs at multiple time points, as well as human arteries with plaques ex vivo. This is the first step to enable beam-tailoring endoscopic probes which achieve diffraction-limited resolution over a large DOF.
△ Less
Submitted 20 July, 2024;
originally announced July 2024.
-
Foundry's perspective on laser and SOA module integration with silicon photonics
Authors:
James Y. S. Tan,
Shawn Xie Wu,
Salih Yanikgonul,
Chao Li,
Patrick Guo-Qiang Lo
Abstract:
Silicon photonic integrated circuit (PIC) builds on the demand for a low cost approach from established silicon-based manufacturing infrastructure traditionally built for electronics. Besides its natural abundance, silicon has desirable properties such as optically low loss (at certain critical wavelengths), and small form factor to enable high density scaled-up optical on-chip circuitry. However,…
▽ More
Silicon photonic integrated circuit (PIC) builds on the demand for a low cost approach from established silicon-based manufacturing infrastructure traditionally built for electronics. Besides its natural abundance, silicon has desirable properties such as optically low loss (at certain critical wavelengths), and small form factor to enable high density scaled-up optical on-chip circuitry. However, given its indirect bandgap, the platform is typically integrated with other direct bandgap (e.g., III-V semiconductor) platforms for on-chip light source. An effective solution to integrating light source onto silicon photonics platform is integral to a practical scaled-up and full-fledged integrated photonics implementation. Here, we discuss the integration solutions, and present our foundry's perspective toward realizing it.
△ Less
Submitted 20 February, 2024;
originally announced May 2024.
-
Room-Temperature Polariton Lasing from CdSe core-only Nanoplatelets
Authors:
Francisco Freire-Fernández,
Nathan G. Sinai,
Max J. H. Tan,
Sang-Min Park,
Eric Koessler,
Todd D. Krauss,
Pengfei Huo,
Teri W. Odom
Abstract:
This paper reports how CdSe core-only nanoplatelets coupled with plasmonic Al nanoparticle lattices can exhibit exciton-polariton lasing. By improving a procedure to synthesize monodisperse 4-monolayer CdSe nanoplatelets, we could resolve polariton decay dynamics and pathways. Experiment and theory confirmed that the system is in the strong coupling regime based on anti-crossings in the dispersion…
▽ More
This paper reports how CdSe core-only nanoplatelets coupled with plasmonic Al nanoparticle lattices can exhibit exciton-polariton lasing. By improving a procedure to synthesize monodisperse 4-monolayer CdSe nanoplatelets, we could resolve polariton decay dynamics and pathways. Experiment and theory confirmed that the system is in the strong coupling regime based on anti-crossings in the dispersion diagrams and magnitude of the Rabi splitting values. Notably, polariton lasing is observed only for cavity lattice periodicities that exhibit specific dispersive characteristics that enable polariton accumulation. The threshold of polariton lasing is 25-fold lower than reported photon lasing values from CdSe nanoplatelets in similar cavity designs. This open-cavity platform offers a simple approach to control exciton polaritons anticipated to benefit quantum information processing, optoelectronics, and chemical reactions.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
arXiv:2401.10508
[pdf]
physics.optics
cond-mat.mes-hall
cond-mat.mtrl-sci
physics.app-ph
quant-ph
Photonic Supercoupling in Silicon Topological Waveguides
Authors:
Ridong Jia,
Yi Ji Tan,
Nikhil Navaratna,
Abhishek Kumar,
Ranjan Singh
Abstract:
Electromagnetic wave coupling between photonic systems relies on the evanescent field typically confined within a single wavelength. Extending evanescent coupling distance requires low refractive index contrast and perfect momentum matching for achieving a large coupling ratio. Here, we report the discovery of photonic supercoupling in a topological valley Hall pair of waveguides, showing a substa…
▽ More
Electromagnetic wave coupling between photonic systems relies on the evanescent field typically confined within a single wavelength. Extending evanescent coupling distance requires low refractive index contrast and perfect momentum matching for achieving a large coupling ratio. Here, we report the discovery of photonic supercoupling in a topological valley Hall pair of waveguides, showing a substantial improvement in coupling efficiency across multiple wavelengths. Experimentally, we realize ultra-high coupling ratios between waveguides through valley-conserved vortex flow of electromagnetic energy, attaining 95% coupling efficiency for separations of up to three wavelengths. This demonstration of photonic supercoupling in topological systems significantly extends the coupling distance between on-chip waveguides and components, paving the path for the development of supercoupled photonic integrated devices, optical sensing, and telecommunications.
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
The effects of aural and visual factors on appropriateness ratings of residential spaces in an urban city
Authors:
Johann Kay Ann Tan,
Siu-Kit Lau,
Yoshimi Hasegawa
Abstract:
This study investigates the aural and visual factors that influence appropriateness perception in soundscape evaluations in residential spaces, where people may spend most of their time in. Appropriateness in soundscape is derived from the expectation of sound sources in a specific environment, place, or function heard by a listener. The appropriateness of soundscapes in 30 locations in an urban r…
▽ More
This study investigates the aural and visual factors that influence appropriateness perception in soundscape evaluations in residential spaces, where people may spend most of their time in. Appropriateness in soundscape is derived from the expectation of sound sources in a specific environment, place, or function heard by a listener. The appropriateness of soundscapes in 30 locations in an urban residential environment is investigated with varying landscape, visual, and aural elements through a questionnaire. Participants experienced the soundscape in situ and were asked to evaluate the appropriateness of soundscape as well as the dominance of specific sound sources such as traffic, human activities, and birdsongs in the residential space. The effect of the type of traffic on appropriateness is also investigated. A strong relationship is found between appropriateness and affective soundscape qualities such as pleasantness, highlighting the importance of considering appropriateness in soundscape research.
△ Less
Submitted 24 December, 2023;
originally announced December 2023.
-
Global Precipitation Nowcasting of Integrated Multi-satellitE Retrievals for GPM: A U-Net Convolutional LSTM Architecture
Authors:
Reyhaneh Rahimi,
Praveen Ravirathinam,
Ardeshir Ebtehaj,
Ali Behrangi,
Jackson Tan,
Vipin Kumar
Abstract:
This paper presents a deep learning architecture for nowcasting of precipitation almost globally every 30 min with a 4-hour lead time. The architecture fuses a U-Net and a convolutional long short-term memory (LSTM) neural network and is trained using data from the Integrated MultisatellitE Retrievals for GPM (IMERG) and a few key precipitation drivers from the Global Forecast System (GFS). The im…
▽ More
This paper presents a deep learning architecture for nowcasting of precipitation almost globally every 30 min with a 4-hour lead time. The architecture fuses a U-Net and a convolutional long short-term memory (LSTM) neural network and is trained using data from the Integrated MultisatellitE Retrievals for GPM (IMERG) and a few key precipitation drivers from the Global Forecast System (GFS). The impacts of different training loss functions, including the mean-squared error (regression) and the focal-loss (classification), on the quality of precipitation nowcasts are studied. The results indicate that the regression network performs well in capturing light precipitation (below 1.6 mm/hr), but the classification network can outperform the regression network for nowcasting of precipitation extremes (>8 mm/hr), in terms of the critical success index (CSI).. Using the Wasserstein distance, it is shown that the predicted precipitation by the classification network has a closer class probability distribution to the IMERG than the regression network. It is uncovered that the inclusion of the physical variables can improve precipitation nowcasting, especially at longer lead times in both networks. Taking IMERG as a relative reference, a multi-scale analysis in terms of fractions skill score (FSS), shows that the nowcasting machine remains skillful (FSS > 0.5) at the resolution of 10 km compared to 50 km for GFS. For precipitation rates greater than 4~mm/hr, only the classification network remains FSS-skillful on scales greater than 50 km within a 2-hour lead time.
△ Less
Submitted 2 February, 2024; v1 submitted 20 July, 2023;
originally announced July 2023.
-
Non-polaritonic effects in cavity-modified photochemistry
Authors:
Philip A. Thomas,
Wai Jue Tan,
Vasyl G. Kravets,
Alexander N. Grigorenko,
William L. Barnes
Abstract:
Strong coupling of molecules to vacuum fields has been widely reported to lead to modified chemical properties such as reaction rates. However, some recent attempts to reproduce infrared strong coupling results have not been successful, suggesting that factors other than strong coupling may sometimes be involved. Here we re-examine the first of these vacuum-modified chemistry experiments in which…
▽ More
Strong coupling of molecules to vacuum fields has been widely reported to lead to modified chemical properties such as reaction rates. However, some recent attempts to reproduce infrared strong coupling results have not been successful, suggesting that factors other than strong coupling may sometimes be involved. Here we re-examine the first of these vacuum-modified chemistry experiments in which changes to a molecular photoisomerisation process in the UV-vis spectral range were attributed to strong coupling of the molecules to visible light. We observed significant variations in photoisomerisation rates consistent with the original work; however, we found no evidence that these changes need to be attributed to strong coupling. Instead, we suggest that the photoisomerisation rates involved are most strongly influenced by the absorption of ultraviolet radiation in the cavity. Our results indicate that care must be taken to rule out non-polaritonic effects before invoking strong coupling to explain any changes of chemical properties arising in cavity-based experiments.
△ Less
Submitted 14 July, 2023; v1 submitted 8 June, 2023;
originally announced June 2023.
-
Assessing inequities in electrification via heat pumps across the U.S
Authors:
Morgan R. Edwards,
Jaime Garibay-Rodriguez,
Jacob Shimkus Erickson,
Muhammad Shayan,
Jing Ling Tan,
Xingchi Shen,
Yueming Lucy Qiu,
Pengfei Liu
Abstract:
Heat pumps are an energy-efficient and increasingly cost-effective solution for reducing greenhouse gas emissions in the building sector. However, other clean energy technologies such as rooftop solar are less likely to be adopted in underserved communities, and thus policies incentivizing their adoption may funnel tax dollars to well-resourced communities. Unlike previously-studied technologies,…
▽ More
Heat pumps are an energy-efficient and increasingly cost-effective solution for reducing greenhouse gas emissions in the building sector. However, other clean energy technologies such as rooftop solar are less likely to be adopted in underserved communities, and thus policies incentivizing their adoption may funnel tax dollars to well-resourced communities. Unlike previously-studied technologies, the effects of heat pumps on household energy bills may be positive or negative depending on local climate, fuel availability and costs, and other factors. Here we propose a framework for assessing heat pump inequities across the U.S. We find that households in communities of color and with higher percentages of renters are less likely to use heat pumps across the board. Moreover, communities of color are least likely to use heat pumps in regions where they are most likely to reduce energy bills. Public policies must address these inequities to advance beneficial electrification and energy justice.
△ Less
Submitted 6 June, 2024; v1 submitted 25 May, 2023;
originally announced May 2023.
-
Motivation, inclusivity, and realism should drive data science education
Authors:
Candace Savonen,
Carrie Wright,
Ava M. Hoffman,
Elizabeth M. Humphries,
Katherine E. L. Cox,
Frederick J. Tan,
Jeffrey T. Leek
Abstract:
Data science education provides tremendous opportunities but remains inaccessible to many communities. Increasing the accessibility of data science to these communities not only benefits the individuals entering data science, but also increases the field's innovation and potential impact as a whole. Education is the most scalable solution to meet these needs, but many data science educators lack f…
▽ More
Data science education provides tremendous opportunities but remains inaccessible to many communities. Increasing the accessibility of data science to these communities not only benefits the individuals entering data science, but also increases the field's innovation and potential impact as a whole. Education is the most scalable solution to meet these needs, but many data science educators lack formal training in education. Our group has led education efforts for a variety of audiences: from professional scientists to high school students to lay audiences. These experiences have helped form our teaching philosophy which we have summarized into three main ideals: 1) motivation, 2) inclusivity, and 3) realism. To put these ideals better into practice, we also aim to iteratively update our teaching approaches and curriculum as we find ways to better reach these ideals. In this manuscript we discuss these ideals as well practical ideas for how to implement these philosophies in the classroom.
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
Role of electrodes in study of hydrovoltaic effects
Authors:
Chunxiao Zheng,
Sunmiao Fang,
Weicun Chu,
Jin Tan,
Bingkun Tian,
Xiaofeng Jiang,
Wanlin Guo
Abstract:
The last decade has witnessed the emergence of hydrovoltaic technology, which can harvest electricity from different forms of water movement, such as raindrops, waves, flows, moisture, and natural evaporation. In particular, the evaporation-induced hydrovoltaic effect received great attention since its discovery in 2017 due to its negative heat emission property. Nevertheless, the influence of ele…
▽ More
The last decade has witnessed the emergence of hydrovoltaic technology, which can harvest electricity from different forms of water movement, such as raindrops, waves, flows, moisture, and natural evaporation. In particular, the evaporation-induced hydrovoltaic effect received great attention since its discovery in 2017 due to its negative heat emission property. Nevertheless, the influence of electrode reactions in evaporation-induced power generation is not negligible due to the chemical reaction between active metal electrodes and water, which leads to " exceptional " power generation. Herein, we designed a series of experiments based on air-laid paper devices with electrodes of different activities as the top and bottom electrodes. To verify the contribution of electrodes, we compared the output performance of different electrode combinations when the device is partially-wetted and fully-wetted. The device hydrophilicity, salt concentration, and acidity or basicity of solutions are also comprehensively investigated. It is demonstrated that the chemical reaction of active metals (Zn, Cu, Ag, etc.) with different aqueous solutions can generate considerable electrical energy and significantly distort the device performance, especially for Zn electrodes with an output voltage from ~1.26 to ~1.52 V and current from ~1.24 to ~75.69 μA. To promote the long-term development of hydrovoltaic technology, we recommend use of inert electrodes in hydrovoltaic studies, such as Au and Pt, especially in water and moisture environment.
△ Less
Submitted 7 April, 2023;
originally announced April 2023.
-
As a matter of colon: I am NOT digging cheeky titles (no, but actually yes :>)
Authors:
Joanne Tan,
Tie Sien Suk
Abstract:
What's in a name, a poet once asked. To which we present this work, where we investigate the importance of a paper title in ensuring its best outcome. We queried astronomy papers using NASA ADS and ranked 6000 of them in terms of cheekiness level. We investigate the correlation between citation counts and (i) the presence of a colon, and (ii) cheekiness ranking. We conclude that colon matters in t…
▽ More
What's in a name, a poet once asked. To which we present this work, where we investigate the importance of a paper title in ensuring its best outcome. We queried astronomy papers using NASA ADS and ranked 6000 of them in terms of cheekiness level. We investigate the correlation between citation counts and (i) the presence of a colon, and (ii) cheekiness ranking. We conclude that colon matters in the anatomy of a paper title. So does trying to be cheeky, but we find that too much cheekiness can lead to cringefests. Striking the right balance is therefore crucial. May we recommend aiming for a level 4 cheekiness on a scale of 1-5.
△ Less
Submitted 29 March, 2023;
originally announced March 2023.
-
Minimizing the fluctuation of resonance driving terms in dynamic aperture optimization
Authors:
Bingfeng Wei,
Zhenghe Bai,
Jiajie Tan,
Lin Wang,
Guangyao Feng
Abstract:
Dynamic aperture (DA) is an important nonlinear property of a storage ring lattice, which has a dominant effect on beam injection efficiency and beam lifetime. Generally, minimizing both resonance driving terms (RDTs) and amplitude dependent tune shifts is an essential condition for enlarging the DA. In this paper, we study the correlation between the fluctuation of RDTs along the ring and the DA…
▽ More
Dynamic aperture (DA) is an important nonlinear property of a storage ring lattice, which has a dominant effect on beam injection efficiency and beam lifetime. Generally, minimizing both resonance driving terms (RDTs) and amplitude dependent tune shifts is an essential condition for enlarging the DA. In this paper, we study the correlation between the fluctuation of RDTs along the ring and the DA area with double- and multi-bend achromat lattices. It is found that minimizing the RDT fluctuations is more effective than minimizing RDTs themselves in enlarging the DA, and thus can serve as a very powerful indicator in the DA optimization. Besides, it is found that minimizing lower-order RDT fluctuations can also reduce higher-order RDTs, which are not only more computationally complicated but also more numerous. The effectiveness of controlling the RDT fluctuations in enlarging the DA confirms that the local cancellation of nonlinear effects used in some diffraction-limited storage ring lattices is more effective than the global cancellation.
△ Less
Submitted 27 March, 2023;
originally announced March 2023.
-
Translating Radiology Reports into Plain Language using ChatGPT and GPT-4 with Prompt Learning: Promising Results, Limitations, and Potential
Authors:
Qing Lyu,
Josh Tan,
Michael E. Zapadka,
Janardhana Ponnatapura,
Chuang Niu,
Kyle J. Myers,
Ge Wang,
Christopher T. Whitlow
Abstract:
The large language model called ChatGPT has drawn extensively attention because of its human-like expression and reasoning abilities. In this study, we investigate the feasibility of using ChatGPT in experiments on using ChatGPT to translate radiology reports into plain language for patients and healthcare providers so that they are educated for improved healthcare. Radiology reports from 62 low-d…
▽ More
The large language model called ChatGPT has drawn extensively attention because of its human-like expression and reasoning abilities. In this study, we investigate the feasibility of using ChatGPT in experiments on using ChatGPT to translate radiology reports into plain language for patients and healthcare providers so that they are educated for improved healthcare. Radiology reports from 62 low-dose chest CT lung cancer screening scans and 76 brain MRI metastases screening scans were collected in the first half of February for this study. According to the evaluation by radiologists, ChatGPT can successfully translate radiology reports into plain language with an average score of 4.27 in the five-point system with 0.08 places of information missing and 0.07 places of misinformation. In terms of the suggestions provided by ChatGPT, they are general relevant such as keeping following-up with doctors and closely monitoring any symptoms, and for about 37% of 138 cases in total ChatGPT offers specific suggestions based on findings in the report. ChatGPT also presents some randomness in its responses with occasionally over-simplified or neglected information, which can be mitigated using a more detailed prompt. Furthermore, ChatGPT results are compared with a newly released large model GPT-4, showing that GPT-4 can significantly improve the quality of translated reports. Our results show that it is feasible to utilize large language models in clinical education, and further efforts are needed to address limitations and maximize their potential.
△ Less
Submitted 28 March, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
Hybrid multi-bend achromat lattice with sextupole cancellation across straight section
Authors:
Jiajie Tan,
Jianhao Xu,
Penghui Yang,
Zhenghe Bai,
Lin Wang
Abstract:
The hybrid multi-bend achromat (HMBA) lattice concept is adopted in some diffraction-limited storage ring designs, which can permit relatively large on-momentum dynamic aperture and relatively weak sextupoles. In a typical HMBA lattice, the main arc section is constrained by the transverse phase advances making -I transformation for sextupole cancellation. In this paper, a new HMBA lattice concept…
▽ More
The hybrid multi-bend achromat (HMBA) lattice concept is adopted in some diffraction-limited storage ring designs, which can permit relatively large on-momentum dynamic aperture and relatively weak sextupoles. In a typical HMBA lattice, the main arc section is constrained by the transverse phase advances making -I transformation for sextupole cancellation. In this paper, a new HMBA lattice concept with sextupole cancellation across straight section is proposed, where -I is made between adjacent dispersion bumps of two lattice cells. This makes the main arc section free of the phase advance constraint, and as a result, the number of bending magnets (bends) in the lattice cell and the cell tunes can be easily changed, thus providing more choices for lattice design. To achieve the large phase advances required for -I in this new concept, split bend is used as the matching bend, which is a bend split into two pieces with a quadrupole in between. The split bend also serves to reduce the emittance, and the large phase advances also give low beta functions in the straight section enhancing the insertion device brightness. Besides, for a given emittance goal, this new HMBA lattice can have less bends than the typical HMBA lattice due to stronger focusing in bend unit cells, which is beneficial for saving space and suppressing intra-beam scattering effect. Two lattices are given as examples to demonstrate this new concept and show its linear and nonlinear properties, and further extension is also discussed.
△ Less
Submitted 4 December, 2022;
originally announced December 2022.
-
Molecular Strong Coupling and Cavity Finesse
Authors:
Kishan S. Menghrajani,
Adarsh B. Vasista,
Wai Jue Tan,
Philip A. Thomas,
Felipe Herrera,
William L. Barnes
Abstract:
Molecular strong coupling offers exciting prospects in physics, chemistry and materials science. Whilst attention has been focused on developing realistic models for the molecular systems, the important role played by the entire photonic mode structure of the optical cavities has been less explored. We show that the effectiveness of molecular strong coupling may be critically dependent on cavity f…
▽ More
Molecular strong coupling offers exciting prospects in physics, chemistry and materials science. Whilst attention has been focused on developing realistic models for the molecular systems, the important role played by the entire photonic mode structure of the optical cavities has been less explored. We show that the effectiveness of molecular strong coupling may be critically dependent on cavity finesse. Specifically we only see emission associated with a dispersive lower polariton for cavities with sufficient finesse. By developing an analytical model of cavity photoluminescence in a multimode structure we clarify the role of finite-finesse in polariton formation, and show that lowering the finesse reduces the extent of the mixing of light and matter in polariton states. We suggest that the detailed nature of the photonic modes supported by a cavity will be as important in developing a coherent framework for molecular strong coupling as the inclusion of realistic molecular models.
△ Less
Submitted 29 July, 2024; v1 submitted 15 November, 2022;
originally announced November 2022.
-
Quantifiably Tuneable Luminescence by Ultra-Thin Metal-Organic Nanosheets via Dual-Guest Energy Transfer
Authors:
Dylan A. Sherman,
Mario Gutiérrez,
Ian Griffiths,
Samraj Mollick,
Nader Amin,
Abderrazzak Douhal,
Jin-Chong Tan
Abstract:
Luminescent metal-organic frameworks (LMOFs) are promising materials for organic light-emitting diode (OLED) alternatives to silicate-based LEDs due to their tuneable structure and programmability. Yet, the 3D nature of LMOFs creates challenges for stability, optical transparency, and device integration. Metal-organic nanosheets (MONs) potentially overcome these limitations by combining the benefi…
▽ More
Luminescent metal-organic frameworks (LMOFs) are promising materials for organic light-emitting diode (OLED) alternatives to silicate-based LEDs due to their tuneable structure and programmability. Yet, the 3D nature of LMOFs creates challenges for stability, optical transparency, and device integration. Metal-organic nanosheets (MONs) potentially overcome these limitations by combining the benefits of MOFs with an atomically thin morphology of large planar dimensions. Here, we report the bottom-up synthesis of atomically thin ZIF-7-III MONs via facile low-energy salt-templating. Employing guest@MOF design, the fluorophores Rhodamine B and Fluorescein were intercalated into ZIF-7 nanosheets (Z7-NS) to form light emissive systems exhibiting intense and highly photostable fluorescence. Aggregation and Förster resonance energy transfer, enabled by the MON framework, were revealed as the mechanisms behind fluorescence. By varying guest concentration, these mechanisms provided predictable quantified control over emission chromaticity of a dual-guest Z7-NS material and the definition of an 'emission chromaticity fingerprint' - a unique subset of the visible spectrum which a material can emit by fluorescence.
△ Less
Submitted 22 October, 2022;
originally announced October 2022.
-
Surface modulation of metal-organic frameworks for on-demand photochromism in the solid state
Authors:
Samraj Mollick,
Yang Zhang,
Waqas Kamal,
Michele Tricarico,
Annika F. Möslein,
Vishal Kachwal,
Nader Amin,
Alfonso A. Castrejón-Pita,
Stephen M. Morris,
Jin-Chong Tan
Abstract:
Organic photoswitchable molecules have struggled in solid state form to fulfill their remarkable potential, in terms of photoswitching performance and long-term stability when compared to their inorganic counterparts. We report the concept of non-electron deficient host's surface with optimal porosity and hydrophobicity, as a priori strategy to design photoefficient organic solid-state photochromi…
▽ More
Organic photoswitchable molecules have struggled in solid state form to fulfill their remarkable potential, in terms of photoswitching performance and long-term stability when compared to their inorganic counterparts. We report the concept of non-electron deficient host's surface with optimal porosity and hydrophobicity, as a priori strategy to design photoefficient organic solid-state photochromic materials with outstanding mechanical robustness. When exposed to a light stimulus including natural sunlight, the photoswitchable nanocomposite changes color promptly and reversibly, in a matter of seconds along with excellent photo-fatigue resistance, which are on a par with inorganic photochromes. Exemplars of commercially viable prototypes that are optically clear, comprising smart windows, complex photochromic sculptures, and self-erasing rewritable devices, were engineered by direct blending with resilient polymers; particularly, the use of high-stiffness polymer (> 2 GPa) is no longer an insurmountable challenge. Finally, photochromic films with anticounterfeiting features could be manufactured through precision inkjet printing of nanocrystals.
△ Less
Submitted 1 October, 2022;
originally announced October 2022.
-
Alignment of the CLAS12 central hybrid tracker with a Kalman Filter
Authors:
S. J. Paul,
A. Peck,
M. Arratia,
Y. Gotra,
V. Ziegler,
R. De Vita,
F. Bossu,
M. Defurne,
H. Atac,
C. Ayerbe Gayoso,
L. Baashen,
N. A. Baltzell,
L. Barion,
M. Bashkanov,
M. Battaglieri,
I. Bedlinskiy,
B. Benkel,
F. Benmokhtar,
A. Bianconi,
L. Biondo,
A. S. Biselli,
M. Bondi,
S. Boiarinov,
K. Th. Brinkmann,
W. J. Briscoe
, et al. (109 additional authors not shown)
Abstract:
Several factors can contribute to the difficulty of aligning the sensors of tracking detectors, including a large number of modules, multiple types of detector technologies, and non-linear strip patterns on the sensors. All three of these factors apply to the CLAS12 CVT, which is a hybrid detector consisting of planar silicon sensors with non-parallel strips, and cylindrical micromegas sensors wit…
▽ More
Several factors can contribute to the difficulty of aligning the sensors of tracking detectors, including a large number of modules, multiple types of detector technologies, and non-linear strip patterns on the sensors. All three of these factors apply to the CLAS12 CVT, which is a hybrid detector consisting of planar silicon sensors with non-parallel strips, and cylindrical micromegas sensors with longitudinal and arc-shaped strips located within a 5~T superconducting solenoid. To align this detector, we used the Kalman Alignment Algorithm, which accounts for correlations between the alignment parameters without requiring the time-consuming inversion of large matrices. This is the first time that this algorithm has been adapted for use with hybrid technologies, non-parallel strips, and curved sensors. We present the results for the first alignment of the CLAS12 CVT using straight tracks from cosmic rays and from a target with the magnetic field turned off. After running this procedure, we achieved alignment at the level of 10~$μ$m, and the widths of the residual spectra were greatly reduced. These results attest to the flexibility of this algorithm and its applicability to future use in the CLAS12 CVT and other hybrid or curved trackers, such as those proposed for the future Electron-Ion Collider.
△ Less
Submitted 9 August, 2022;
originally announced August 2022.
-
Designing inorganic semiconductors with cold-rolling processability
Authors:
Xu-Dong Wang,
Jieling Tan,
Jian Ouyang,
Hangming Zhang,
Jiang-Jing Wang,
Yuecun Wang,
Volker L. Deringer,
Jian Zhou,
Wei Zhang,
En Ma
Abstract:
While metals can be readily processed and reshaped by cold rolling, most bulk inorganic semiconductors are brittle materials that tend to fracture when plastically deformed. Manufacturing thin sheets and foils of inorganic semiconductors is therefore a bottleneck problem, severely restricting their use in flexible electronics applications. It was recently reported that a few single-crystalline two…
▽ More
While metals can be readily processed and reshaped by cold rolling, most bulk inorganic semiconductors are brittle materials that tend to fracture when plastically deformed. Manufacturing thin sheets and foils of inorganic semiconductors is therefore a bottleneck problem, severely restricting their use in flexible electronics applications. It was recently reported that a few single-crystalline two-dimensional van der Waals (vdW) semiconductors, such as InSe, are deformable under compressive stress. Here we demonstrate that intralayer fracture toughness can be tailored via compositional design to make inorganic semiconductors processable by cold rolling. We report systematic ab initio calculations covering a range of van der Waals semiconductors homologous to InSe, leading to material-property maps that forecast trends in both the susceptibility to interlayer slip and the intralayer fracture toughness against cracking. GaSe has been predicted, and experimentally confirmed, to be practically amenable to being rolled to large (three quarters) thickness reduction and length extension by a factor of three. Our findings open a new realm of possibility for alloy selection and design towards processing-friendly group-III chalcogenides for flexible electronic and thermoelectric applications.
△ Less
Submitted 19 June, 2022;
originally announced July 2022.
-
A cost-effective quantum eraser demonstration
Authors:
Aarushi Khandelwal,
Jit Bin Joseph Tan,
Tze Kwang Leong,
Yarong Yang,
T Venkatesan,
Hariom Jani
Abstract:
The quantum eraser is a variation of the celebrated Young's interference experiment that can be used to demonstrate the elusive complementarity principle in quantum physics. Here we show the construction of its classical analogue for deployment in classrooms in a simple, cost-effective yet robust manner by employing a laser pointer, double-slits, and polarizers.
The quantum eraser is a variation of the celebrated Young's interference experiment that can be used to demonstrate the elusive complementarity principle in quantum physics. Here we show the construction of its classical analogue for deployment in classrooms in a simple, cost-effective yet robust manner by employing a laser pointer, double-slits, and polarizers.
△ Less
Submitted 27 April, 2022;
originally announced April 2022.
-
Laser plasma accelerated ultra-intense electron beam for efficiently exciting nuclear isomers
Authors:
Jie Feng,
YaoJun Li,
JunHao Tan,
WenZhao Wang,
YiFei Li,
XiaoPeng Zhang,
Yue Meng,
XuLei Ge,
Feng Liu,
WenChao Yan,
ChangBo Fu,
LiMing Chen,
Jie Zhang
Abstract:
Utilizing laser plasma wakefield to accelerate ultra-high charge electron beam is critical for many pioneering applications, for example to efficiently produce nuclear isomers with short lifetimes which may be widely used. However, because of the beam loading effect, electron charge in a single plasma bubble is limited in level of hundreds picocoulomb. Here, we experimentally present that a hundre…
▽ More
Utilizing laser plasma wakefield to accelerate ultra-high charge electron beam is critical for many pioneering applications, for example to efficiently produce nuclear isomers with short lifetimes which may be widely used. However, because of the beam loading effect, electron charge in a single plasma bubble is limited in level of hundreds picocoulomb. Here, we experimentally present that a hundred kilo-ampere, twenty nanocoulomb, tens of MeV collimated electron beam is produced from a chain of wakefield acceleration, via a tightly focused intense laser pulse transversely matched in dense plasma. This ultra-intense electron beam ascribes to a novel efficient injection that the nitrogen atom inner shell electrons are ionized and continuously injected into multiple plasma bubbles. This intense electron beam has been utilized to exciting nuclear isomers with an ultra-high peak efficiency of $1.76\times10^{15}$ particles/s via photonuclear reactions. This efficient production method of isomers can be widely used for pumping isotopes with excited state lifetimes down to picosecond, which is benefit for deep understanding nuclear transition mechanisms and stimulating gamma-ray lasers.
△ Less
Submitted 12 March, 2022;
originally announced March 2022.
-
Nano-Trap Engineering in MOF Microenvironment for Ultratrace Iodine Sensors
Authors:
Arun S. Babal,
Samraj Mollick,
Waqas Kamal,
Steve Elston,
Alfonso A. Castrejón-Pita,
Stephen M. Morris,
Jin-Chong Tan
Abstract:
Ultra-sensitive and highly selective iodine gas sensors play a crucial role during the nuclear radiation leak for a timely detection and mitigation of pollution, ensuring the safety of a vast number of operators and subsequent integrity of the facility. Herein, we rationally designed a metal-organic framework (MOF) that exhibits an outstanding performance with an almost billion-fold enhancement in…
▽ More
Ultra-sensitive and highly selective iodine gas sensors play a crucial role during the nuclear radiation leak for a timely detection and mitigation of pollution, ensuring the safety of a vast number of operators and subsequent integrity of the facility. Herein, we rationally designed a metal-organic framework (MOF) that exhibits an outstanding performance with an almost billion-fold enhancement in the electrical response due to its optimized hydrophobicity, which allows the easy migration of iodine molecules though the channels and the presence of suitable interaction sites, temporarily anchoring the target molecule for ultra-trace sensing. The prototype sensor tested in demanding environments demonstrates its high selectivity, ultra-trace parts per billion (ppb)-level sensitivity, good reversibility, and a very fast response time even at high frequencies compared to existing adsorbents, including commercially available materials. Further, the iodine sensing at the atomic level was studied in detail by measuring the electrical response of a single crystal and, the optimal thickness of the MOF layer was identified for an industrially-viable prototype sensor by using inkjet printing. In a wider perspective, we propose a general strategy towards electrically efficient sensing materials with hybrid functionalities for engineering high-sensitivity iodine sensors for a safe and sustainable future.
△ Less
Submitted 17 February, 2022;
originally announced February 2022.
-
Femtosecond pumping of nuclear isomeric states by the Coulomb collision of ions with quivering electrons
Authors:
Jie Feng,
Wenzhao Wang,
Changbo Fu,
Liming Chen,
Junhao Tan,
Yaojun Li,
Jinguang Wang,
Yifei Li,
Guoqiang Zhang,
Yugang Ma,
Jie Zhang
Abstract:
Efficient production of nuclear isomers is critical for pioneering applications, like nuclear clocks, nuclear batteries, clean nuclear energy, and nuclear γ-ray lasers. However, due to small production cross sections and quick decays, it is extremely difficult to acquire a significant amount of isomers with short lifetimes via traditional accelerators or reactors because of low beam intensity. Her…
▽ More
Efficient production of nuclear isomers is critical for pioneering applications, like nuclear clocks, nuclear batteries, clean nuclear energy, and nuclear γ-ray lasers. However, due to small production cross sections and quick decays, it is extremely difficult to acquire a significant amount of isomers with short lifetimes via traditional accelerators or reactors because of low beam intensity. Here, for the first time, we experimentally present femtosecond pumping of nuclear isomeric states by the Coulomb excitation of ions with the quivering electrons induced by laser fields. Nuclei populated on the third excited state of 83Kr are generated with a peak efficiency of 2.34*10^15 particles=s from a tabletop hundred-TW laser system. It can be explained by the Coulomb excitation of ions with the quivering electrons during the interaction between laser pulses and clusters at nearly solid densities. This efficient and universal production method can be widely used for pumping isotopes with excited state lifetimes down to picoseconds, and could be a benefit for fields like nuclear transition mechanisms and nuclear γ-ray lasers.
△ Less
Submitted 9 February, 2022;
originally announced February 2022.
-
Mobility of bacterial protein Hfq on dsDNA; Role of C-terminus mediated transient binding
Authors:
Chuan Jie Tan,
Rajib Basak,
Indresh Yadav,
Jeroen A. van Kan,
Veronique Arluison,
Johan R. C. van der Maarel
Abstract:
The mobility of protein is fundamental in the machinery of life. Here, we have investigated the effect of DNA binding in conjunction with DNA internal motion of the bacterial Hfq master regulator devoid of its amyloid C-terminus domain. Hfq is one of the most abundant nucleoid associated proteins that shape the bacterial chromosome and is involved in several aspects of nucleic acid metabolism. Flu…
▽ More
The mobility of protein is fundamental in the machinery of life. Here, we have investigated the effect of DNA binding in conjunction with DNA internal motion of the bacterial Hfq master regulator devoid of its amyloid C-terminus domain. Hfq is one of the most abundant nucleoid associated proteins that shape the bacterial chromosome and is involved in several aspects of nucleic acid metabolism. Fluorescence microscopy has been used to track a C-terminus domain lacking mutant form of Hfq on double stranded DNA, which is stretched by confinement to a rectangular nanofluidic channel. The mobility of the mutant is strongly accelerated with respect to the wild type variant. Furthermore, it shows a reverse dependence on the internal motion of DNA, in that slower motion results in slower protein diffusion. Results demonstrate the subtle role of DNA internal motion in controlling the mobility of a nucleoid associated protein, and, in particular, the importance of transient binding and moving DNA strands out of the way.
△ Less
Submitted 6 December, 2021;
originally announced December 2021.
-
An Autograded, Open Educational Resource Assessment Tool for Astronomy Using MyOpenMath
Authors:
Joshua Tan,
Allyson Sheffield,
Jana Grcevich
Abstract:
We present an Open Educational Resource system that instructors can use to assign automatically graded, randomized, and scaffolded assessment questions for astronomy classes.
We present an Open Educational Resource system that instructors can use to assign automatically graded, randomized, and scaffolded assessment questions for astronomy classes.
△ Less
Submitted 30 November, 2021;
originally announced November 2021.
-
Nanoconfinement of Tetraphenylethylene in Zeolitic Metal-Organic Framework for Turn-on Mechanofluorochromic Stress Sensing
Authors:
Yang Zhang,
Tao Xiong,
Annika F. Möslein,
Samraj Mollick,
Vishal Kachwal,
Arun Singh Babal,
Jin-Chong Tan
Abstract:
Mechanofluorochromic materials are of great significance for the fabrication of innovative sensors and optoelectronics. However, efficient mechanofluorochromic materials are rarely explored due to the deficiency of existing design strategies. Here, we demonstrate the incarceration of aggregation-induced emission (AIE) materials within metal-organic framework (MOF) single crystals to construct a co…
▽ More
Mechanofluorochromic materials are of great significance for the fabrication of innovative sensors and optoelectronics. However, efficient mechanofluorochromic materials are rarely explored due to the deficiency of existing design strategies. Here, we demonstrate the incarceration of aggregation-induced emission (AIE) materials within metal-organic framework (MOF) single crystals to construct a composite system with turn-on mechanofluorochromism. A new type of AIE@MOF material was designed: integrating a zeolitic MOF (ZIF-71) and tetraphenylethylene (TPE, a topical AIE material) to generate a TPE@ZIF-71 system with exceptional turn-on type mechanofluorochromism. Using terahertz vibrational spectroscopy, we show the unique fluorochromism emanates from the enhanced nanoconfinement effect exerted by ZIF-71 host on TPE guest under pressure and its permanent fluorescence after stress release. Compared with pure TPE, we demonstrate the nanoconfinement in AIE@MOF not only changes the TPE's turn-off type sensing behavior to a turn-on type, but boosts the original sensitivity markedly by tenfold. Significantly, because ZIF-71 prevents the spontaneous recrystallization of TPE upon unloading, this allows TPE@ZIF-71 to record the stress history. This is the first demonstration of the Guest@MOF system combining the concepts of AIE and MOF; its promising properties and potential engineering applications will stimulate new directions pertaining to luminescent stress sensors and smart optics.
△ Less
Submitted 21 November, 2021;
originally announced November 2021.
-
Long-Lived Highly Emissive MOFs as Potential Candidates for Multiphotonic Applications
Authors:
Mario Gutiérrez,
Cristina Martín,
Johan Hofkens,
Jin-Chong Tan
Abstract:
Long-lived emissive materials based on room temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF) are considered as the cornerstone of the development of optical sensors, security systems and solid-state lighting. Nevertheless, molecular systems with these properties are scarce because most of them suffer from aggregation caused quenching emission (ACQ). One approac…
▽ More
Long-lived emissive materials based on room temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF) are considered as the cornerstone of the development of optical sensors, security systems and solid-state lighting. Nevertheless, molecular systems with these properties are scarce because most of them suffer from aggregation caused quenching emission (ACQ). One approach to address this shortcoming is by inhibiting the molecular motions/vibrations by employing a fixed matrix as afforded by a metal-organic framework (MOF). There, the organic chromophores are confined in a crystalline framework, and the structure-property relationship can be designed to get RTP/TADF. Inspired by this, the present work explores the relation between the linker arrangement and the physicochemical properties of two isochemical MOFs with different crystalline structures. The denser MOF exhibits a long-lived green RTP due to a hyperfine coupling of the linkers. On the other hand, the more porous MOF presents a long-lived temperature-dependent turquoise emission, reflecting the influence of the TADF. Hence, this study provides a huge advance about the potential of MOFs to undergo RTP and TADF emission, and at the same time, demonstrates their potential applicability in a wide range of photonic technologies, including physical and chemical sensing and the first example of a MOF-LED based on RTP-MOFs.
△ Less
Submitted 20 October, 2021;
originally announced October 2021.
-
Observation of high efficiency Betatron radiation from femtosecond petawatt laser irradiated near critical plasmas
Authors:
J. H. Tan,
Y. F. Li,
D. Z. Li,
J. Feng,
Y. J. Li,
W. J. Zhou,
Y. H. Yan,
Z. M. Zhang,
B. L. Zhang,
J. G. Wang,
Y. Q. Gu,
Y. T. Li,
L. M. Chen
Abstract:
We present an experimental demonstration of high conversion efficiency Betatron x-ray radiation from petawatt laser irradiated near critical plasmas. Direct laser acceleration serves as the dominant regime when laser pulse of ~5e20 W/cm2 intensity is focused into plasmas with electron density of 3e20 /cm3. Electron beam with a charge of ~35 nC is accelerated up to a maximum energy of 70 MeV and em…
▽ More
We present an experimental demonstration of high conversion efficiency Betatron x-ray radiation from petawatt laser irradiated near critical plasmas. Direct laser acceleration serves as the dominant regime when laser pulse of ~5e20 W/cm2 intensity is focused into plasmas with electron density of 3e20 /cm3. Electron beam with a charge of ~35 nC is accelerated up to a maximum energy of 70 MeV and emit x-rays when oscillating in the laser field. The deduced energy conversion efficiency from laser to x-rays is up to 1e-4, orders of magnitude higher than other betatron regimes. Enhancement of acceleration and radiation with sharp plasma density boundary is also obtained and further interpretated with 2D particle-in-cell simulations.
△ Less
Submitted 25 September, 2021;
originally announced September 2021.
-
Tunable Fluorescein-Encapsulated Zeolitic Imidazolate Framework-8 Nanoparticles for Solid-State Lighting
Authors:
Tao Xiong,
Yang Zhang,
Lorenzo Donà,
Mario Gutiérrez,
Annika F. Möslein,
Arun S. Babal,
Nader Amin,
Bartolomeo Civalleri,
Jin-Chong Tan
Abstract:
A series of fluorescein-encapsulated zeolitic imidazolate framework-8 (fluorescein@ZIF-8) luminescent nanoparticles with a scalable guest loading has been fabricated and characterized. The successful encapsulation of the organic dye (fluorescein) is supported by both experimental evidence and theoretical simulations. The measured optical band gap is found to be comparable with the computed values…
▽ More
A series of fluorescein-encapsulated zeolitic imidazolate framework-8 (fluorescein@ZIF-8) luminescent nanoparticles with a scalable guest loading has been fabricated and characterized. The successful encapsulation of the organic dye (fluorescein) is supported by both experimental evidence and theoretical simulations. The measured optical band gap is found to be comparable with the computed values of a hypothetical guest-host system. Isolated monomers and aggregates species of fluorescein confined in ZIF-8 nanocrystals have been systematically investigated through fluorescence lifetime spectroscopy. The quantum yield (QY) of the obtained solid-state materials is particularly high (QY~98%), especially when the concentration of the fluorescein guest is low. Combining a blue LED chip and a thin photoactive film of fluorescein@ZIF-8, we demonstrate a device with good optical tunability for multicolor and white light emissions. Additionally, we show that the fluorescein@ZIF-8 nanoparticles exhibit an improved photostability due to the shielding effect conferred by the nanoconfinement of host framework, making them promising candidates for practical applications such as solid-state lighting, photonics, and optical communications.
△ Less
Submitted 24 September, 2021;
originally announced September 2021.
-
Glue-Assisted Grinding Exfoliation of Large-Size 2D Materials for Insulating Thermal Conduction and Large-Current-Density Hydrogen Evolution
Authors:
Liusi Yang,
Dashuai Wang,
Minsu Liu,
Heming Liu,
Junyang Tan,
Heyuan Zhou,
Zhongyue Wang,
Qiangmin Yu,
Jingyun Wang,
Junhao Lin,
Xiaolong Zou,
Ling Qiu,
Hui-Ming Cheng,
Bilu Liu
Abstract:
Two-dimensional (2D) materials have many promising applications, but their scalable production remains challenging. Herein, we develop a glue-assisted grinding exfoliation (GAGE) method in which the adhesive polymer acts as a glue to massively produce 2D materials with large lateral sizes, high quality, and high yield. Density functional theory simulation shows that the exfoliation mechanism invol…
▽ More
Two-dimensional (2D) materials have many promising applications, but their scalable production remains challenging. Herein, we develop a glue-assisted grinding exfoliation (GAGE) method in which the adhesive polymer acts as a glue to massively produce 2D materials with large lateral sizes, high quality, and high yield. Density functional theory simulation shows that the exfoliation mechanism involves the competition between the binding energy of selected polymers and the 2D materials which is larger than the exfoliation energy of the layered materials. Taking h-BN as an example, the GAGE produces 2D h-BN with an average lateral size of 2.18 μm and thickness of 3.91 nm. The method is also extended to produce various other 2D materials, including graphene, MoS2, Bi2O2Se, vermiculite, and montmorillonite. Two representative applications of thus-produced 2D materials have been demonstrated, including h-BN/polymer composites for insulating thermal conduction and MoS2 electrocatalysts for large-current-density hydrogen evolution, indicating the great potential of massively produced 2D materials.
△ Less
Submitted 30 August, 2021;
originally announced August 2021.
-
Ferroelectric HfO$_2$ Memory Transistors with High-$κ$ Interfacial Layer and Write Endurance Exceeding $10^{10}$ Cycles
Authors:
Ava Jiang Tan,
Yu-Hung Liao,
Li-Chen Wang,
Jong-Ho Bae,
Chenming Hu,
Sayeef Salahuddin
Abstract:
We demonstrate ferroelectric (FE) memory transistors on a crystalline silicon channel with endurance exceeding $10^{10}$ cycles. The ferroelectric transistors (FeFETs) incorporate a high-$κ$ interfacial layer (IL) of thermally grown silicon nitride (SiN$_x$) and a thin 4.5 nm layer of Zr-doped FE-HfO$_2$ on a $\sim$30 nm SOI channel. The device shows a $\sim$ 1V memory window in a DC sweep of just…
▽ More
We demonstrate ferroelectric (FE) memory transistors on a crystalline silicon channel with endurance exceeding $10^{10}$ cycles. The ferroelectric transistors (FeFETs) incorporate a high-$κ$ interfacial layer (IL) of thermally grown silicon nitride (SiN$_x$) and a thin 4.5 nm layer of Zr-doped FE-HfO$_2$ on a $\sim$30 nm SOI channel. The device shows a $\sim$ 1V memory window in a DC sweep of just $\pm$ 2.5V, and can be programmed and erased with voltage pulses of $V_G= \pm$ 3V at a pulse width of 250 ns. The device also shows very good retention behavior. These results indicate that appropriate engineering of the IL layer could substantially improve FeFET device performance and reliability.
△ Less
Submitted 15 March, 2021;
originally announced March 2021.
-
Global Daily CO$_2$ emissions for the year 2020
Authors:
Zhu Liu,
Zhu Deng,
Philippe Ciais,
Jianguang Tan,
Biqing Zhu,
Steven J. Davis,
Robbie Andrew,
Olivier Boucher,
Simon Ben Arous,
Pep Canadel,
Xinyu Dou,
Pierre Friedlingstein,
Pierre Gentine,
Rui Guo,
Chaopeng Hong,
Robert B. Jackson,
Daniel M. Kammen,
Piyu Ke,
Corinne Le Quere,
Crippa Monica,
Greet Janssens-Maenhout,
Glen Peters,
Katsumasa Tanaka,
Yilong Wang,
Bo Zheng
, et al. (3 additional authors not shown)
Abstract:
The diurnal cycle CO$_2$ emissions from fossil fuel combustion and cement production reflect seasonality, weather conditions, working days, and more recently the impact of the COVID-19 pandemic. Here, for the first time we provide a daily CO$_2$ emission dataset for the whole year of 2020 calculated from inventory and near-real-time activity data (called Carbon Monitor project: https://carbonmonit…
▽ More
The diurnal cycle CO$_2$ emissions from fossil fuel combustion and cement production reflect seasonality, weather conditions, working days, and more recently the impact of the COVID-19 pandemic. Here, for the first time we provide a daily CO$_2$ emission dataset for the whole year of 2020 calculated from inventory and near-real-time activity data (called Carbon Monitor project: https://carbonmonitor.org). It was previously suggested from preliminary estimates that did not cover the entire year of 2020 that the pandemics may have caused more than 8% annual decline of global CO$_2$ emissions. Here we show from detailed estimates of the full year data that the global reduction was only 5.4% (-1,901 MtCO$_2$, ). This decrease is 5 times larger than the annual emission drop at the peak of the 2008 Global Financial Crisis. However, global CO$_2$ emissions gradually recovered towards 2019 levels from late April with global partial re-opening. More importantly, global CO$_2$ emissions even increased slightly by +0.9% in December 2020 compared with 2019, indicating the trends of rebound of global emissions. Later waves of COVID-19 infections in late 2020 and corresponding lockdowns have caused further CO$_2$ emissions reductions particularly in western countries, but to a much smaller extent than the declines in the first wave. That even substantial world-wide lockdowns of activity led to a one-time decline in global CO$_2$ emissions of only 5.4% in one year highlights the significant challenges for climate change mitigation that we face in the post-COVID era. These declines are significant, but will be quickly overtaken with new emissions unless the COVID-19 crisis is utilized as a break-point with our fossil-fuel trajectory, notably through policies that make the COVID-19 recovery an opportunity to green national energy and development plans.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
A novel energy resolved neutron imaging detector based on TPX3Cam for the CSNS
Authors:
Jianqing Yang,
Jianrong Zhou,
Xingfen Jiang,
Jinhao Tan,
Lianjun Zhang,
Jianjin Zhou,
Xiaojuan Zhou,
Wenqin Yang,
Yuanguang Xia,
Jie Chen,
XinLi Sun,
Quanhu Zhang,
Zhijia Sun,
Yuanbo Chen
Abstract:
The China Spallation Neutron Source (CSNS) operates in pulsed mode and has a high neutron flux. This provides opportunities for energy resolved neutron imaging by using the TOF (Time Of Flight) approach. An Energy resolved neutron imaging instrument (ERNI) is being built at the CSNS but significant challenges for the detector persist because it simultaneously requires a spatial resolution of less…
▽ More
The China Spallation Neutron Source (CSNS) operates in pulsed mode and has a high neutron flux. This provides opportunities for energy resolved neutron imaging by using the TOF (Time Of Flight) approach. An Energy resolved neutron imaging instrument (ERNI) is being built at the CSNS but significant challenges for the detector persist because it simultaneously requires a spatial resolution of less than 100 μm, as well as a microsecond-scale timing resolution. This study constructs a prototype of an energy resolved neutron imaging detector based on the fast optical camera, TPX3Cam coupled with an image intensifier. To evaluate its performance, a series of proof of principle experiments were performed in the BL20 at the CSNS to measure the spatial resolution and the neutron wavelength spectrum, and perform neutron imaging with sliced wavelengths and Bragg edge imaging of the steel sample. A spatial resolution of 57 μm was obtained for neutron imaging by using the centroiding algorithm, the timing resolution was on the microsecond scale and the measured wavelength spectrum was identical to that measured by a beam monitor. In addition, any wavelengths can be selected for the neutron imaging of the given object, and the detector can be used for Bragg edge imaging. The results show that our detector has good performances and can satisfy the requirements of ERNI for detectors at the CSNS
△ Less
Submitted 26 February, 2021;
originally announced February 2021.
-
Deep learning-based COVID-19 pneumonia classification using chest CT images: model generalizability
Authors:
Dan Nguyen,
Fernando Kay,
Jun Tan,
Yulong Yan,
Yee Seng Ng,
Puneeth Iyengar,
Ron Peshock,
Steve Jiang
Abstract:
Since the outbreak of the COVID-19 pandemic, worldwide research efforts have focused on using artificial intelligence (AI) technologies on various medical data of COVID-19-positive patients in order to identify or classify various aspects of the disease, with promising reported results. However, concerns have been raised over their generalizability, given the heterogeneous factors in training data…
▽ More
Since the outbreak of the COVID-19 pandemic, worldwide research efforts have focused on using artificial intelligence (AI) technologies on various medical data of COVID-19-positive patients in order to identify or classify various aspects of the disease, with promising reported results. However, concerns have been raised over their generalizability, given the heterogeneous factors in training datasets. This study aims to examine the severity of this problem by evaluating deep learning (DL) classification models trained to identify COVID-19-positive patients on 3D computed tomography (CT) datasets from different countries. We collected one dataset at UT Southwestern (UTSW), and three external datasets from different countries: CC-CCII Dataset (China), COVID-CTset (Iran), and MosMedData (Russia). We divided the data into 2 classes: COVID-19-positive and COVID-19-negative patients. We trained nine identical DL-based classification models by using combinations of the datasets with a 72% train, 8% validation, and 20% test data split. The models trained on a single dataset achieved accuracy/area under the receiver operating characteristics curve (AUC) values of 0.87/0.826 (UTSW), 0.97/0.988 (CC-CCCI), and 0.86/0.873 (COVID-CTset) when evaluated on their own dataset. The models trained on multiple datasets and evaluated on a test set from one of the datasets used for training performed better. However, the performance dropped close to an AUC of 0.5 (random guess) for all models when evaluated on a different dataset outside of its training datasets. Including the MosMedData, which only contained positive labels, into the training did not necessarily help the performance on the other datasets. Multiple factors likely contribute to these results, such as patient demographics and differences in image acquisition or reconstruction, causing a data shift among different study cohorts.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
De-carbonization of global energy use during the COVID-19 pandemic
Authors:
Zhu Liu,
Biqing Zhu,
Philippe Ciais,
Steven J. Davis,
Chenxi Lu,
Haiwang Zhong,
Piyu Ke,
Yanan Cui,
Zhu Deng,
Duo Cui,
Taochun Sun,
Xinyu Dou,
Jianguang Tan,
Rui Guo,
Bo Zheng,
Katsumasa Tanaka,
Wenli Zhao,
Pierre Gentine
Abstract:
The COVID-19 pandemic has disrupted human activities, leading to unprecedented decreases in both global energy demand and GHG emissions. Yet a little known that there is also a low carbon shift of the global energy system in 2020. Here, using the near-real-time data on energy-related GHG emissions from 30 countries (about 70% of global power generation), we show that the pandemic caused an unprece…
▽ More
The COVID-19 pandemic has disrupted human activities, leading to unprecedented decreases in both global energy demand and GHG emissions. Yet a little known that there is also a low carbon shift of the global energy system in 2020. Here, using the near-real-time data on energy-related GHG emissions from 30 countries (about 70% of global power generation), we show that the pandemic caused an unprecedented de-carbonization of global power system, representing by a dramatic decrease in the carbon intensity of power sector that reached a historical low of 414.9 tCO2eq/GWh in 2020. Moreover, the share of energy derived from renewable and low-carbon sources (nuclear, hydro-energy, wind, solar, geothermal, and biomass) exceeded that from coal and oil for the first time in history in May of 2020. The decrease in global net energy demand (-1.3% in the first half of 2020 relative to the average of the period in 2016-2019) masks a large down-regulation of fossil-fuel-burning power plants supply (-6.1%) coincident with a surge of low-carbon sources (+6.2%). Concomitant changes in the diurnal cycle of electricity demand also favored low-carbon generators, including a flattening of the morning ramp, a lower midday peak, and delays in both the morning and midday load peaks in most countries. However, emission intensities in the power sector have since rebounded in many countries, and a key question for climate mitigation is thus to what extent countries can achieve and maintain lower, pandemic-level carbon intensities of electricity as part of a green recovery.
△ Less
Submitted 5 February, 2021;
originally announced February 2021.
-
Facile and Fast Transformation of Non-Luminescent to Highly Luminescent MOFs: Acetone Sensing for Diabetes Diagnosis and Lead Capture from Polluted Water
Authors:
Mario Gutiérrez,
Annika F. Möslein,
Jin-Chong Tan
Abstract:
Metal-organic frameworks (MOFs) stand as one of the most promising materials for the development of advanced technologies owing to their unique combination of properties. The conventional synthesis of MOFs involves a direct reaction of the organic linkers and metal salts, however, their post-synthetic modification is a sophisticated route to produce new materials or to confer novel properties that…
▽ More
Metal-organic frameworks (MOFs) stand as one of the most promising materials for the development of advanced technologies owing to their unique combination of properties. The conventional synthesis of MOFs involves a direct reaction of the organic linkers and metal salts, however, their post-synthetic modification is a sophisticated route to produce new materials or to confer novel properties that cannot be attained through traditional methods. This work describes the post-synthetic MOF-to-MOF transformation of a non-luminescent MOF (Zn-based OX-1) into a highly luminescent framework (Ag-based OX-2) by a simple immersion of the former in a silver salt solution. The conversion mechanism exploits the uncoordinated oxygen atoms of terephthalate linkers found in OX-1, instead of the unsaturated metal sites commonly employed, making the reaction much faster. The materials derived from the OX-1 to OX-2 transformation are highly luminescent and exhibit a selective response to acetone, turning them into a promising candidate for manufacturing fluorometric sensors for the diagnosis and monitoring of diabetes mellitus. Our methodology can be extended to other metals such as lead (Pb). The fabrication of a polymer mixed-matrix membrane containing OX-1 is used as a proof-of-concept for capturing Pb ions (as pollutants) from water. This research instigates the exploration of alternative methodologies to confer MOFs with special aptitudes for photochemical sensing or for environmental applications such as water purification.
△ Less
Submitted 20 January, 2021;
originally announced January 2021.
-
Structure, preparation, and applications of 2D material-based metal-semiconductor heterostructures
Authors:
Junyang Tan,
Shisheng Li,
Bilu Liu1,
Hui-Ming Cheng
Abstract:
Two-dimensional (2D) materials family with its many members and different properties has recently drawn great attention. Thanks to their atomic thickness and smooth surface, 2D materials can be constructed into heterostructures or homostructures in the fashion of out-of-plane perpendicular stacking or in-plane lateral stitching, resulting in unexpected physical and chemical properties and applicat…
▽ More
Two-dimensional (2D) materials family with its many members and different properties has recently drawn great attention. Thanks to their atomic thickness and smooth surface, 2D materials can be constructed into heterostructures or homostructures in the fashion of out-of-plane perpendicular stacking or in-plane lateral stitching, resulting in unexpected physical and chemical properties and applications in many areas. In particular, 2D metal-semiconductor heterostructures or homostructures (MSHSs) which integrate 2D metals and 2D semiconductors, have shown great promise in future integrated electronics and energy-related applications. In this review, MSHSs with different structures and dimensionalities are first introduced, followed by several ways to prepare them. Their applications in electronics and optoelectronics, energy storage and conversion, and their use as platforms to exploit new physics are then discussed. Finally, we give our perspectives about the challenges and future research directions in this emerging field.
△ Less
Submitted 30 December, 2020;
originally announced December 2020.
-
Monadic Pavlovian associative learning in a backpropagation-free photonic network
Authors:
James Y. S. Tan,
Zengguang Cheng,
Johannes Feldmann,
Xuan Li,
Nathan Youngblood,
Utku E. Ali,
C. David Wright,
Wolfram H. P. Pernice,
Harish Bhaskaran
Abstract:
Over a century ago, Ivan P. Pavlov, in a classic experiment, demonstrated how dogs can learn to associate a ringing bell with food, thereby causing a ring to result in salivation. Today, it is rare to find the use of Pavlovian type associative learning for artificial intelligence (AI) applications even though other learning concepts, in particular backpropagation on artificial neural networks (ANN…
▽ More
Over a century ago, Ivan P. Pavlov, in a classic experiment, demonstrated how dogs can learn to associate a ringing bell with food, thereby causing a ring to result in salivation. Today, it is rare to find the use of Pavlovian type associative learning for artificial intelligence (AI) applications even though other learning concepts, in particular backpropagation on artificial neural networks (ANNs) have flourished. However, training using the backpropagation method on 'conventional' ANNs, especially in the form of modern deep neural networks (DNNs), is computationally and energy intensive. Here we experimentally demonstrate a form of backpropagation-free learning using a single (or monadic) associative hardware element. We realize this on an integrated photonic platform using phase-change materials combined with on-chip cascaded directional couplers. We then develop a scaled-up circuit network using our monadic Pavlovian photonic hardware that delivers a distinct machine-learning framework based on single-element associations and, importantly, using backpropagation-free architectures to address general learning tasks. Our approach reduces the computational burden imposed by learning in conventional neural network approaches, thereby increasing speed, whilst also offering higher bandwidth inherent to our photonic implementation.
△ Less
Submitted 5 August, 2022; v1 submitted 30 November, 2020;
originally announced November 2020.
-
Machine learning and high-throughput robust design of P3HT-CNT composite thin films for high electrical conductivity
Authors:
Daniil Bash,
Yongqiang Cai,
Vijila Chellappan,
Swee Liang Wong,
Yang Xu,
Pawan Kumar,
Jin Da Tan,
Anas Abutaha,
Jayce Cheng,
Yee Fun Lim,
Siyu Tian,
Danny Zekun Ren,
Flore Mekki-Barrada,
Wai Kuan Wong,
Jatin Kumar,
Saif Khan,
Qianxiao Li,
Tonio Buonassisi,
Kedar Hippalgaonkar
Abstract:
Combining high-throughput experiments with machine learning allows quick optimization of parameter spaces towards achieving target properties. In this study, we demonstrate that machine learning, combined with multi-labeled datasets, can additionally be used for scientific understanding and hypothesis testing. We introduce an automated flow system with high-throughput drop-casting for thin film pr…
▽ More
Combining high-throughput experiments with machine learning allows quick optimization of parameter spaces towards achieving target properties. In this study, we demonstrate that machine learning, combined with multi-labeled datasets, can additionally be used for scientific understanding and hypothesis testing. We introduce an automated flow system with high-throughput drop-casting for thin film preparation, followed by fast characterization of optical and electrical properties, with the capability to complete one cycle of learning of fully labeled ~160 samples in a single day. We combine regio-regular poly-3-hexylthiophene with various carbon nanotubes to achieve electrical conductivities as high as 1200 S/cm. Interestingly, a non-intuitive local optimum emerges when 10% of double-walled carbon nanotubes are added with long single wall carbon nanotubes, where the conductivity is seen to be as high as 700 S/cm, which we subsequently explain with high fidelity optical characterization. Employing dataset resampling strategies and graph-based regressions allows us to account for experimental cost and uncertainty estimation of correlated multi-outputs, and supports the proving of the hypothesis linking charge delocalization to electrical conductivity. We therefore present a robust machine-learning driven high-throughput experimental scheme that can be applied to optimize and understand properties of composites, or hybrid organic-inorganic materials.
△ Less
Submitted 20 November, 2020;
originally announced November 2020.
-
Estimates of daily ground-level NO2 concentrations in China based on big data and machine learning approaches
Authors:
Xinyu Dou,
Cuijuan Liao,
Hengqi Wang,
Ying Huang,
Ying Tu,
Xiaomeng Huang,
Yiran Peng,
Biqing Zhu,
Jianguang Tan,
Zhu Deng,
Nana Wu,
Taochun Sun,
Piyu Ke,
Zhu Liu
Abstract:
Nitrogen dioxide (NO2) is one of the most important atmospheric pollutants. However, current ground-level NO2 concentration data are lack of either high-resolution coverage or full coverage national wide, due to the poor quality of source data and the computing power of the models. To our knowledge, this study is the first to estimate the ground-level NO2 concentration in China with national cover…
▽ More
Nitrogen dioxide (NO2) is one of the most important atmospheric pollutants. However, current ground-level NO2 concentration data are lack of either high-resolution coverage or full coverage national wide, due to the poor quality of source data and the computing power of the models. To our knowledge, this study is the first to estimate the ground-level NO2 concentration in China with national coverage as well as relatively high spatiotemporal resolution (0.25 degree; daily intervals) over the newest past 6 years (2013-2018). We advanced a Random Forest model integrated K-means (RF-K) for the estimates with multi-source parameters. Besides meteorological parameters, satellite retrievals parameters, we also, for the first time, introduce socio-economic parameters to assess the impact by human activities. The results show that: (1) the RF-K model we developed shows better prediction performance than other models, with cross-validation R2 = 0.64 (MAPE = 34.78%). (2) The annual average concentration of NO2 in China showed a weak increasing trend . While in the economic zones such as Beijing-Tianjin-Hebei region, Yangtze River Delta, and Pearl River Delta, the NO2 concentration there even decreased or remained unchanged, especially in spring. Our dataset has verified that pollutant controlling targets have been achieved in these areas. With mapping daily nationwide ground-level NO2 concentrations, this study provides timely data with high quality for air quality management for China. We provide a universal model framework to quickly generate a timely national atmospheric pollutants concentration map with a high spatial-temporal resolution, based on improved machine learning methods.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Towards human-interpretable, automated learning of feedback control for the mixing layer
Authors:
Hao Li,
Guy Y. Cornejo Maceda,
Yiqing Li,
Jianguo Tan,
Marek Morzyński,
Bernd R. Noack
Abstract:
We propose an automated analysis of the flow control behaviour from an ensemble of control laws and associated time-resolved flow snapshots. The input may be the rich data base of machine learning control (MLC) optimizing a feedback law for a cost function in the plant. The proposed methodology provides (1) insights into control landscape which maps control laws to performance including extrema an…
▽ More
We propose an automated analysis of the flow control behaviour from an ensemble of control laws and associated time-resolved flow snapshots. The input may be the rich data base of machine learning control (MLC) optimizing a feedback law for a cost function in the plant. The proposed methodology provides (1) insights into control landscape which maps control laws to performance including extrema and ridge-lines, (2) a catalogue of representative flow states and their contribution to cost function for investigated control laws and (3) a visualization of the dynamics. Key enablers are classification and feature extraction methods of machine learning. The analysis is successfully applied to the stabilization of a mixing layer with sensor-based feedback driving an upstream actuator. The fluctuation energy is reduced by 26\%. The control replaces unforced Kelvin-Helmholtz vortices with subsequent vortex pairing by higher-frequency Kelvin-Helmholtz structures of lower energy. These efforts target a human interpretable, fully automated analysis of MLC identifying qualitatively different actuation regimes, distilling corresponding coherent structures, and developing a digital twin of the plant.
△ Less
Submitted 29 August, 2020;
originally announced August 2020.
-
High-Throughput Production of Cheap Mineral-Based 2D Electrocatalysts for High-Current-Density Hydrogen Evolution
Authors:
Chi Zhang,
Yuting Luo,
Junyang Tan,
Fengning Yang,
Zhiyuan Zhang,
Liusi Yang,
Hui-Ming Cheng,
Bilu Liu
Abstract:
The high-throughput scalable production of cheap, efficient and durable electrocatalysts that work well at high current densities demanded by industry is a great challenge for the large-scale implementation of electrochemical technologies. Here we report the production of a 2D MoS2-based ink-type electrocatalyst by a scalable top-down exfoliation technique followed by a simple heat treatment. The…
▽ More
The high-throughput scalable production of cheap, efficient and durable electrocatalysts that work well at high current densities demanded by industry is a great challenge for the large-scale implementation of electrochemical technologies. Here we report the production of a 2D MoS2-based ink-type electrocatalyst by a scalable top-down exfoliation technique followed by a simple heat treatment. The catalyst shows a high current density of 1000 mA cm^-2 at an overpotential of 454 mV for the hydrogen evolution reaction (HER) without the need of iR correction, as well as good stability over 24 hours. Using the same method, we have, for the first time, produced a cheap MoS2 mineral-based catalyst and found that it had an excellent performance for high-current-density HER. Noteworthy, production rate of this MoS2-based catalyst is one to two orders of magnitude higher than those previously reported. In addition, the price of the MoS2 mineral is five orders of magnitude lower than commercial Pt catalysts, making the MoS2 mineral-based catalyst cheap, and the ink-type catalyst dispersions can be easily integrated with other technologies for large-scale catalyst electrode preparation. These advantages indicate the huge potentials of this method and mineral-based cheap and abundant natural resources as catalysts in the electrochemical technologies.
△ Less
Submitted 28 July, 2020;
originally announced July 2020.
-
Mass Production of Two-Dimensional Materials by Intermediate-Assisted Grinding Exfoliation
Authors:
Chi Zhang,
Junyang Tan,
Yikun Pan,
Xingke Cai,
Xiaolong Zou,
Hui-Ming Cheng,
Bilu Liu
Abstract:
The scalable and high-efficiency production of two-dimensional (2D) materials is a prerequisite to their commercial use. Currently, only graphene and graphene oxide can be produced on a ton scale, and the inability to produce other 2D materials on such a large scale hinders their technological applications. Here we report a grinding exfoliation method that uses micro-particles as force intermediat…
▽ More
The scalable and high-efficiency production of two-dimensional (2D) materials is a prerequisite to their commercial use. Currently, only graphene and graphene oxide can be produced on a ton scale, and the inability to produce other 2D materials on such a large scale hinders their technological applications. Here we report a grinding exfoliation method that uses micro-particles as force intermediates to resolve applied compressive forces into a multitude of small shear forces, inducing the highly-efficient exfoliation of layer materials. The method, referred to as intermediate-assisted grinding exfoliation (iMAGE), can be used for the large-scale production of many 2D materials. As an example, we have exfoliated bulk h-BN into 2D h-BN with large flake sizes, high quality and structural integrity, with a high exfoliation yield of 67%, a high production rate of 0.3 g h-1 and a low energy consumption of 3.01x10^6 J g-1. The production rate and energy consumption are one to two orders of magnitude better than previous results. Besides h-BN, this iMAGE technology has been used to exfoliate various layer materials such as graphite, black phosphorus, transition metal dichalcogenides, and metal oxides, proving its universality. Molybdenite concentrate, a natural low-cost and abundant mineral, was used as a demo for the large-scale exfoliation production of 2D MoS2 flakes. Our work indicates the huge potential of the iMAGE method to produce large amounts of various 2D materials, which paves the way for their commercial application.
△ Less
Submitted 14 July, 2020;
originally announced July 2020.
-
Near-field infrared nanospectroscopy reveals guest confinement in metal-organic framework single crystals
Authors:
Annika F. Möslein,
Mario Gutiérrez,
Boiko Cohen,
Jin-Chong Tan
Abstract:
Metal-organic frameworks (MOFs) can provide exceptional porosity for molecular guest encapsulation useful for emergent applications in sensing, gas storage, drug delivery and optoelectronics. Central to the realisation of such applications however is the successful incorporation of a functional guest confined within the host framework. Here we demonstrate, for the first time, the feasibility of sc…
▽ More
Metal-organic frameworks (MOFs) can provide exceptional porosity for molecular guest encapsulation useful for emergent applications in sensing, gas storage, drug delivery and optoelectronics. Central to the realisation of such applications however is the successful incorporation of a functional guest confined within the host framework. Here we demonstrate, for the first time, the feasibility of scattering-type scanning near-field optical microscopy (s-SNOM) and nano-Fourier transform infrared (nanoFTIR) spectroscopy, in concert with density functional theory (DFT) calculations to reveal the vibrational characteristics of the Guest@MOF systems. Probing individual MOF crystals, we pinpoint the local molecular vibrations and thus, shed new light on the host-guest interactions at the nanoscale. Our strategy not only confirms the successful encapsulation of luminescent guest molecules in the porous host framework in single crystals, but further provides a new methodology for nanoscale-resolved physical and chemical identification of wide-ranging framework materials and designer porous systems for advanced applications.
△ Less
Submitted 1 January, 2021; v1 submitted 9 July, 2020;
originally announced July 2020.
-
Anomalous Subthreshold Behaviors in Negative Capacitance Transistors
Authors:
Yu-Hung Liao,
Daewoong Kwon,
Suraj Cheema,
Ava J. Tan,
Ming-Yen Kao,
Li-Chen Wang,
Chenming Hu,
Sayeef Salahuddin
Abstract:
Recent measurements on ultra-thin body Negative Capacitance Field Effect Transistors have shown subthreshold behaviors that are not expected in a classical MOSFET. Specifically, subthreshold swing was found to decrease with increased gate bias in the subthreshold region for devices measured over multiple gate lengths down to 30 nm. In addition, improvement in the subthreshold swing relative to con…
▽ More
Recent measurements on ultra-thin body Negative Capacitance Field Effect Transistors have shown subthreshold behaviors that are not expected in a classical MOSFET. Specifically, subthreshold swing was found to decrease with increased gate bias in the subthreshold region for devices measured over multiple gate lengths down to 30 nm. In addition, improvement in the subthreshold swing relative to control devices showed a non-monotonic dependence on the gate length. In this paper, using a Landau-Khanatnikov ferroelectric gate stack model calibrated with measured Capacitance-Voltage, we show that both these anomalous behaviors can be quantitatively reproduced with TCAD simulations.
△ Less
Submitted 3 June, 2020;
originally announced June 2020.
-
A Transition-edge Sensor-based X-ray Spectrometer for the Study of Highly Charged Ions at the National Institute of Standards and Technology Electron Beam Ion Trap
Authors:
P. Szypryt,
G. C. O'Neil,
E. Takacs,
J. N. Tan,
S. W. Buechele,
A. S. Naing,
D. A. Bennett,
W. B. Doriese,
M. Durkin,
J. W. Fowler,
J. D. Gard,
G. C. Hilton,
K. M. Morgan,
C. D. Reintsema,
D. R. Schmidt,
D. S. Swetz,
J. N. Ullom,
Yu. Ralchenko
Abstract:
We report on the design, commissioning, and initial measurements of a Transition-edge Sensor (TES) x-ray spectrometer for the Electron Beam Ion Trap (EBIT) at the National Institute of Standards and Technology (NIST). Over the past few decades, the NIST EBIT has produced numerous studies of highly charged ions in diverse fields such as atomic physics, plasma spectroscopy, and laboratory astrophysi…
▽ More
We report on the design, commissioning, and initial measurements of a Transition-edge Sensor (TES) x-ray spectrometer for the Electron Beam Ion Trap (EBIT) at the National Institute of Standards and Technology (NIST). Over the past few decades, the NIST EBIT has produced numerous studies of highly charged ions in diverse fields such as atomic physics, plasma spectroscopy, and laboratory astrophysics. The newly commissioned NIST EBIT TES Spectrometer (NETS) improves the measurement capabilities of the EBIT through a combination of high x-ray collection efficiency and resolving power. NETS utilizes 192 individual TES x-ray microcalorimeters (166/192 yield) to improve upon the collection area by a factor of ~30 over the 4-pixel neutron transmutation doped germanium-based microcalorimeter spectrometer previously used at the NIST EBIT. The NETS microcalorimeters are optimized for the x-ray energies from roughly 500 eV to 8,000 eV and achieve an energy resolution of 3.7 eV to 5.0 eV over this range, a more modest (<2X) improvement over the previous microcalorimeters. Beyond this energy range NETS can operate with various trade-offs, the most significant of which are reduced efficiency at lower energies and being limited to a subset of the pixels at higher energies. As an initial demonstration of the capabilities of NETS, we measured transitions in He-like and H-like O, Ne, and Ar as well as Ni-like W. We detail the energy calibration and data analysis techniques used to transform detector counts into x-ray spectra, a process that will be the basis for analyzing future data.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
On low-energy tail distortions in the detector responsefunction of x-ray microcalorimeter spectrometers
Authors:
G. C. O'Neil,
P. Szypryt,
E. Takacs,
J. N. Tan,
S. W. Buechele,
A. S. Naing,
Y. I. Joe,
D. Swetz,
D. R. Schmidt,
W. B. Doriese,
J. D. Gard,
C. D. Reintsema,
J. N. Ullom,
J. S. Villarrubia,
Yu. Ralchenko
Abstract:
We use narrow spectral lines from the x-ray spectra of various highlycharged ions to measure low-energy tail-like deviations from a Gaussian responsefunction in a microcalorimter x-ray spectrometer with Au absorbers at energiesfrom 650 eV to 3320 eV. We review the literature on low energy tails in othermicrocalorimter x-ray spectrometers and present a model that explains all thereviewed tail fract…
▽ More
We use narrow spectral lines from the x-ray spectra of various highlycharged ions to measure low-energy tail-like deviations from a Gaussian responsefunction in a microcalorimter x-ray spectrometer with Au absorbers at energiesfrom 650 eV to 3320 eV. We review the literature on low energy tails in othermicrocalorimter x-ray spectrometers and present a model that explains all thereviewed tail fraction measurements. In this model a low energy tail arises fromthe combination of electron escape and energy trapping associated with Bi x-rayabsorbers.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Fast magneto-ionic switching of interface anisotropy using yttria-stabilized zirconia gate oxide
Authors:
Ki-Young Lee,
Sujin Jo,
Aik Jun Tan,
Mantao Huang,
Dongwon Choi,
Jung Hoon Park,
Ho-Il Ji,
Ji-Won Son,
Joonyeon Chang,
Geoffrey S. D. Beach,
Seonghoon Woo
Abstract:
Voltage control of interfacial magnetism has been greatly highlighted in spintronics research for many years, as it might enable ultra-low power technologies. Among few suggested approaches, magneto-ionic control of magnetism has demonstrated large modulation of magnetic anisotropy. Moreover, the recent demonstration of magneto-ionic devices using hydrogen ions presented relatively fast magnetizat…
▽ More
Voltage control of interfacial magnetism has been greatly highlighted in spintronics research for many years, as it might enable ultra-low power technologies. Among few suggested approaches, magneto-ionic control of magnetism has demonstrated large modulation of magnetic anisotropy. Moreover, the recent demonstration of magneto-ionic devices using hydrogen ions presented relatively fast magnetization toggle switching, tsw ~ 100 ms, at room temperature. However, the operation speed may need to be significantly improved to be used for modern electronic devices. Here, we demonstrate that the speed of proton-induced magnetization toggle switching largely depends on proton-conducting oxides. We achieve ~1 ms reliable (> 103 cycles) switching using yttria-stabilized zirconia (YSZ), which is ~ 100 times faster than the state-of-the-art magneto-ionic devices reported to date at room temperature. Our results suggest further engineering of the proton-conducting materials could bring substantial improvement that may enable new low-power computing scheme based on magneto-ionics.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
A new signature for strong light-matter coupling using spectroscopic ellipsometry
Authors:
Philip A. Thomas,
Wai Jue Tan,
Henry A. Fernandez,
William L. Barnes
Abstract:
Light-matter interactions can occur when an ensemble of molecular resonators is placed in a confined electromagnetic field. In the strong coupling regime the rapid exchange of energy between the molecules and the electromagnetic field results in the emergence of hybrid light-matter states called polaritons. Multiple criteria exist to define the strong coupling regime, usually by comparing the spli…
▽ More
Light-matter interactions can occur when an ensemble of molecular resonators is placed in a confined electromagnetic field. In the strong coupling regime the rapid exchange of energy between the molecules and the electromagnetic field results in the emergence of hybrid light-matter states called polaritons. Multiple criteria exist to define the strong coupling regime, usually by comparing the splitting of the polariton bands with the linewidths of the uncoupled modes. Here we highlight the limitations of these criteria and study strong coupling using spectroscopic ellipsometry, a commonly used optical characterisation technique. We identify a new signature of strong coupling in ellipsometric phase spectra. Combining ellipsometric amplitude and phase spectra yields a distinct topological feature that we suggest could serve as a new criterion for strong coupling. Our results introduce the idea of ellipsometric topology and could provide further insight into the transition from the weak to strong coupling regime.
△ Less
Submitted 7 August, 2020; v1 submitted 28 April, 2020;
originally announced April 2020.