-
A Review of Spatial Network Insights and Methods in the Context of Planning: Applications, Challenges, and Opportunities
Authors:
Xiaofan Liang,
Yuhao Kang
Abstract:
With the rise of geospatial big data, new narratives of cities based on spatial networks and flows have replaced the traditional focus on locations. While plenty of research have empirically analyzed network structures, there lacks a state-of-the-art synthesis of applicable insights and methods of spatial networks in the planning context. In this chapter, we reviewed the theories, concepts, method…
▽ More
With the rise of geospatial big data, new narratives of cities based on spatial networks and flows have replaced the traditional focus on locations. While plenty of research have empirically analyzed network structures, there lacks a state-of-the-art synthesis of applicable insights and methods of spatial networks in the planning context. In this chapter, we reviewed the theories, concepts, methods, and applications of spatial network analysis in cities and their insights for planners from four areas of concern: spatial structures, urban infrastructure optimizations, indications of economic wealth, social capital, and residential mobility, and public health control (especially COVID-19). We also outlined four challenges that planners face when taking the planning knowledge from spatial networks to actions: data openness and privacy, linkage to direct policy implications, lack of civic engagement, and the difficulty to visualize and integrate with GIS. Finally, we envisioned how spatial networks can be integrated into a collaborative planning framework.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
Analysis of the blowout plasma wakefields produced by drive beams with elliptical symmetry
Authors:
P. Manwani,
Y. Kang,
J. Mann,
B. Naranjo,
G. Andonian,
J. B. Rosenzweig
Abstract:
In the underdense (blowout) regime of plasma wakefield acceleration (PWFA), the particle beam is denser than the plasma. Under these conditions, the plasma electrons are nearly completely rarefacted from the beam channel, resulting in a nominally uniform ion column. Extensive investigations of this interaction assuming axisymmetry have been undertaken. However, the plasma blowout produced by a tra…
▽ More
In the underdense (blowout) regime of plasma wakefield acceleration (PWFA), the particle beam is denser than the plasma. Under these conditions, the plasma electrons are nearly completely rarefacted from the beam channel, resulting in a nominally uniform ion column. Extensive investigations of this interaction assuming axisymmetry have been undertaken. However, the plasma blowout produced by a transversely asymmetric driver possesses quite different characteristics. They create an asymmetric plasma rarefaction region (bubble) which leads to asymmetric focusing in the two transverse planes. This is also accompanied by an undesired non-uniform accelerating gradient. The asymmetric blowout cross-section is found through simulation to be elliptical, and treating it as such permits a simple extension of the symmetric theory. In particular, focusing fields linear in both transverse directions exist in the bubble. The form of the wake potential and the concomitant matching conditions in this elliptical cavity are discussed in this paper. We also discuss bubble boundary estimation in the long driver limit and applications of the asymmetric features of the wakefield.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Enhanced continuous aerosol optical depth (AOD) estimation using geostationary satellite data: focusing on nighttime AOD over East Asia
Authors:
Sanghyeon Song,
Yoojin Kang,
Jungho Im
Abstract:
Continuous aerosol monitoring in East Asia is essential due to the massive aerosol emissions from natural and anthropogenic sources. Geostationary satellites enable continuous aerosol monitoring; however, the observation is limited to the daytime. This study proposed machine learning-based models to estimate daytime and nighttime aerosol optical depth (AOD) in East Asia using a geostationary satel…
▽ More
Continuous aerosol monitoring in East Asia is essential due to the massive aerosol emissions from natural and anthropogenic sources. Geostationary satellites enable continuous aerosol monitoring; however, the observation is limited to the daytime. This study proposed machine learning-based models to estimate daytime and nighttime aerosol optical depth (AOD) in East Asia using a geostationary satellite, Geo-KOMPSAT-2A (GK-2A). The input variables for the machine learning models include the brightness temperature (BT) and top-of-atmosphere (TOA) reflectance from GK-2A, meteorological and geographical data, and auxiliary variables. The two models that used different combinations of GK-2A variables were proposed and compared: the all-day BT model, which estimates AOD during both day and night using BT variables, and the daytime TOA model, which estimates AOD during the day using TOA reflectance variables as well. The estimated AODs by the models were validated with ground-based AOD data from the Aerosol Robotic Network (AERONET) by 10-fold cross-validation and hold-out validation methods. The performance of the daytime TOA model was slightly higher than the all-day BT model during the day (R2 = 0.80-0.82, root mean square error (RMSE) = 0.107-0.116 for the all-day BT model, R2 = 0.83, RMSE = 0.098 for the daytime TOA model). The SHapley Additive exPlanations (SHAP) analysis showed that total precipitable water content and seasonality contributed the most for both proposed models. BT differences and TOA reflectance variables were identified as the next most contributing variables for the all-day BT and daytime TOA models. The spatiotemporal distributions of estimated AODs from the proposed models show similar patterns compared with other AOD products. A time series comparison at a test station demonstrated that the estimated AOD of the proposed models was consistent with the AERONET AOD.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Deep Geometry Handling and Fragment-wise Molecular 3D Graph Generation
Authors:
Odin Zhang,
Yufei Huang,
Shichen Cheng,
Mengyao Yu,
Xujun Zhang,
Haitao Lin,
Yundian Zeng,
Mingyang Wang,
Zhenxing Wu,
Huifeng Zhao,
Zaixi Zhang,
Chenqing Hua,
Yu Kang,
Sunliang Cui,
Peichen Pan,
Chang-Yu Hsieh,
Tingjun Hou
Abstract:
Most earlier 3D structure-based molecular generation approaches follow an atom-wise paradigm, incrementally adding atoms to a partially built molecular fragment within protein pockets. These methods, while effective in designing tightly bound ligands, often overlook other essential properties such as synthesizability. The fragment-wise generation paradigm offers a promising solution. However, a co…
▽ More
Most earlier 3D structure-based molecular generation approaches follow an atom-wise paradigm, incrementally adding atoms to a partially built molecular fragment within protein pockets. These methods, while effective in designing tightly bound ligands, often overlook other essential properties such as synthesizability. The fragment-wise generation paradigm offers a promising solution. However, a common challenge across both atom-wise and fragment-wise methods lies in their limited ability to co-design plausible chemical and geometrical structures, resulting in distorted conformations. In response to this challenge, we introduce the Deep Geometry Handling protocol, a more abstract design that extends the design focus beyond the model architecture. Through a comprehensive review of existing geometry-related models and their protocols, we propose a novel hybrid strategy, culminating in the development of FragGen - a geometry-reliable, fragment-wise molecular generation method. FragGen marks a significant leap forward in the quality of generated geometry and the synthesis accessibility of molecules. The efficacy of FragGen is further validated by its successful application in designing type II kinase inhibitors at the nanomolar level.
△ Less
Submitted 15 March, 2024;
originally announced April 2024.
-
Crystal Facet Effect in Plasmonic Catalysis
Authors:
Yicui Kang,
Simão M. João,
Rui Lin,
Li Zhu,
Junwei Fu,
Weng-Chon,
Cheong,
Seunghoon Lee,
Kilian Frank,
Bert Nickel,
Min Liu,
Johannes Lischner,
Emiliano Cortés
Abstract:
In the realm of plasmonic catalytic systems, much attention has been devoted to the plasmon-derived mechanisms, yet the influence of nanoparticles' crystal facets in this type of processes has been sparsely investigated. In this work, we study the plasmon-assisted electrocatalytic CO2 reduction reaction using three different shapes of plasmonic Au nanoparticles - nanocube (NC), rhombic dodecahedro…
▽ More
In the realm of plasmonic catalytic systems, much attention has been devoted to the plasmon-derived mechanisms, yet the influence of nanoparticles' crystal facets in this type of processes has been sparsely investigated. In this work, we study the plasmon-assisted electrocatalytic CO2 reduction reaction using three different shapes of plasmonic Au nanoparticles - nanocube (NC), rhombic dodecahedron (RD) and octahedron (OC) - with three different exposed facets: {100}, {110} and {111}, respectively. These particles were synthesized with similar sizes and LSPR wavelengths to reveal the role of the facet more than other contributions to the plasmon-assisted reaction. Upon plasmon excitation, Au OCs exhibited nearly a doubling in the Faradaic efficiency of CO (FE(CO)) and a remarkable threefold enhancement in the partial current density of CO (j(CO)) compared to the non-illuminated response, NCs also demonstrated an improved performance under illumination. In contrast, Au RDs showed nearly the same performance in dark or light conditions. Temperature-dependent experiments ruled out heat as the main factor in the enhanced response of Au OCs and NCs. Large-scale atomistic simulations of the nanoparticles' electronic structure and electromagnetic modeling revealed higher hot carrier abundance and electric field enhancement on Au OCs and NCs compared to RDs. Abundant hot carriers on edges facilitate molecular activation, leading to enhanced selectivity and activity. Thus, OCs with the highest edge/facet ratio exhibited the strongest enhancement in FE(CO) and j(CO) upon illumination. This observation is further supported by plasmon-assisted H2 evolution reaction experiments. Our findings highlight the dominance of low coordinated sites over facets in plasmonic catalytic processes, providing valuable insights for designing more efficient catalysts for solar fuels production.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
ChatMOF: An Autonomous AI System for Predicting and Generating Metal-Organic Frameworks
Authors:
Yeonghun Kang,
Jihan Kim
Abstract:
ChatMOF is an autonomous Artificial Intelligence (AI) system that is built to predict and generate metal-organic frameworks (MOFs). By leveraging a large-scale language model (GPT-4 and GPT-3.5-turbo), ChatMOF extracts key details from textual inputs and delivers appropriate responses, thus eliminating the necessity for rigid structured queries. The system is comprised of three core components (i.…
▽ More
ChatMOF is an autonomous Artificial Intelligence (AI) system that is built to predict and generate metal-organic frameworks (MOFs). By leveraging a large-scale language model (GPT-4 and GPT-3.5-turbo), ChatMOF extracts key details from textual inputs and delivers appropriate responses, thus eliminating the necessity for rigid structured queries. The system is comprised of three core components (i.e. an agent, a toolkit, and an evaluator) and it forms a robust pipeline that manages a variety of tasks, including data retrieval, property prediction, and structure generations. The study further explores the merits and constraints of using large language models (LLMs) AI system in material sciences using and showcases its transformative potential for future advancements.
△ Less
Submitted 25 August, 2023; v1 submitted 31 July, 2023;
originally announced August 2023.
-
A Discontinuous Galerkin Finite Element Model for Compound Flood Simulations
Authors:
Chayanon Wichitrnithed,
Eirik Valseth,
Ethan J. Kubatko,
Younghun Kang,
Mackenzie Hudson,
Clint Dawson
Abstract:
Recent tropical cyclones, e.g., Hurricane Harvey (2017), have lead to significant rainfall and resulting runoff with accompanying flooding. When the runoff interacts with storm surge, the resulting floods can be greatly amplified and lead to effects that cannot be modeled by simple superposition of its distinctive sources. In an effort to develop accurate numerical simulations of runoff, surge, an…
▽ More
Recent tropical cyclones, e.g., Hurricane Harvey (2017), have lead to significant rainfall and resulting runoff with accompanying flooding. When the runoff interacts with storm surge, the resulting floods can be greatly amplified and lead to effects that cannot be modeled by simple superposition of its distinctive sources. In an effort to develop accurate numerical simulations of runoff, surge, and compounding floods, we develop a local discontinuous Galerkin method for modified shallow water equations. In this modification, nonzero sources to the continuity equation are included to incorporate rainfall into the model using parametric rainfall models from literature as well as hindcast data. The discontinuous Galerkin spatial discretization is accompanied with a strong stability preserving explicit Runge Kutta time integrator. Hence, temporal stability is ensured through the CFL condition and we exploit the embarrassingly parallel nature of the developed method using MPI parallelization. We demonstrate the capabilities of the developed method though a sequence of physically relevant numerical tests, including small scale test cases based on laboratory measurements and large scale experiments with Hurricane Harvey in the Gulf of Mexico. The results highlight the conservation properties and robustness of the developed method and show the potential of compound flood modeling using our approach.
△ Less
Submitted 17 December, 2023; v1 submitted 26 July, 2023;
originally announced July 2023.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Flat beam plasma wakefield accelerator
Authors:
Pratik Manwani,
Nathan Majernik,
Joshua Mann,
Yunbo Kang,
Derek Chow,
Havyn Ancelin,
Gerard Andonian,
James Rosenzweig
Abstract:
Particle beams with highly asymmetric emittance ratios are expected at the interaction point of high energy colliders. These asymmetric beams can be used to drive high gradient wakefields in dielectrics and plasma. In the case of plasma, the high aspect ratio of the drive beam creates a transversely elliptical blowout cavity and the asymmetry in the ion column creates asymmetric focusing in the tw…
▽ More
Particle beams with highly asymmetric emittance ratios are expected at the interaction point of high energy colliders. These asymmetric beams can be used to drive high gradient wakefields in dielectrics and plasma. In the case of plasma, the high aspect ratio of the drive beam creates a transversely elliptical blowout cavity and the asymmetry in the ion column creates asymmetric focusing in the two transverse planes. The ellipticity of the blowout depends on the ellipticity and normalized charge density of the beam. In this paper, simulations are performed to investigate the ellipticity of the wakefield based on the initial driver beam parameters. The matching conditions for this elliptical cavity are discussed. Example cases for employment using the attainable parameter space at the AWA and FACET facilities are also presented.
△ Less
Submitted 3 May, 2023;
originally announced May 2023.
-
Substrate-mediated Borophane Polymorphs through Hydrogenation of Two-dimensional Boron Sheets
Authors:
Yuchong Kang,
Xiaoyun Ma,
Jing Fu,
Kun Yang,
Zongguo Wang,
Haibo Li,
Wei Ma,
Jin Zhang
Abstract:
Two-dimensional boron monolayer (borophene) stands out from the two-dimensional atomic layered materials due to its structural flexibility, tunable electronic and mechanical properties from a large number of allotropic materials. The stability of pristine borophene polymorphs could possibly be improved via hydrogenation with atomic hydrogen (referred to as borophane). However, the precise adsorpti…
▽ More
Two-dimensional boron monolayer (borophene) stands out from the two-dimensional atomic layered materials due to its structural flexibility, tunable electronic and mechanical properties from a large number of allotropic materials. The stability of pristine borophene polymorphs could possibly be improved via hydrogenation with atomic hydrogen (referred to as borophane). However, the precise adsorption structures and the underlying mechanism are still elusive. Employing first-principles calculations, we demonstrate the optimal configurations of freestanding borophanes and the ones grown on metallic substrates. For freestanding β12 and χ3 borophenes, the energetically favored hydrogen adsorption sites are on the top of the boron atoms with CN=4 (CN: coordination number), while the best absorption sites for α' borophene are on the top of the boron atoms with CN=6. With various metal substrates, the hydrogenation configurations of borophene are modulated significantly, attributed to the chemical hybridization strength between B pz and H s orbitals. These findings provide a deep insight into the hydrogenating borophenes and facilitate the stabilization of two-dimensional boron polymorphs by engineering hydrogen adsorption sites and concentrations.
△ Less
Submitted 30 May, 2022;
originally announced May 2022.
-
Physics-aware Reduced-order Modeling of Transonic Flow via $β$-Variational Autoencoder
Authors:
Yu-Eop Kang,
Sunwoong Yang,
Kwanjung Yee
Abstract:
Autoencoder-based reduced-order modeling (ROM) has recently attracted significant attention, owing to its ability to capture underlying nonlinear features. However, two critical drawbacks severely undermine its scalability to various physical applications: entangled and therefore uninterpretable latent variables (LVs) and the blindfold determination of latent space dimension. In this regard, this…
▽ More
Autoencoder-based reduced-order modeling (ROM) has recently attracted significant attention, owing to its ability to capture underlying nonlinear features. However, two critical drawbacks severely undermine its scalability to various physical applications: entangled and therefore uninterpretable latent variables (LVs) and the blindfold determination of latent space dimension. In this regard, this study proposes the physics-aware ROM using only interpretable and information-intensive LVs extracted by $β$-variational autoencoder, which are referred to as physics-aware LVs throughout this paper. To extract these LVs, their independence and information intensity are quantitatively scrutinized in a two-dimensional transonic flow benchmark problem. Then, the physical meanings of the physics-aware LVs are thoroughly investigated and we confirmed that with appropriate hyperparameter $β$, they actually correspond to the generating factors of the training dataset, Mach number and angle of attack. To the best of the authors' knowledge, our work is the first to practically confirm that $β$-variational autoencoder can automatically extract the physical generating factors in the field of applied physics. Finally, physics-aware ROM, which utilizes only physics-aware LVs, is compared with conventional ROMs, and its validity and efficiency are successfully verified.
△ Less
Submitted 9 June, 2022; v1 submitted 1 May, 2022;
originally announced May 2022.
-
Quality Control of Mass-Produced GEM Detectors for the CMS GE1/1 Muon Upgrade
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
T. Beyrouthy,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi
, et al. (157 additional authors not shown)
Abstract:
The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton co…
▽ More
The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton collisions is expected to exceed $2-3\times10^{34}$~cm$^{-2}$s$^{-1}$ for Run 3 (starting in 2022), and it will be at least $5\times10^{34}$~cm$^{-2}$s$^{-1}$ when the High Luminosity Large Hadron Collider is completed for Run 4. These conditions will affect muon triggering, identification, and measurement, which are critical capabilities of the experiment. To address these challenges, additional muon detectors are being installed in the CMS endcaps, based on Gas Electron Multiplier technology. For this purpose, 161 large triple-Gas Electron Multiplier detectors have been constructed and tested. Installation of these devices began in 2019 with the GE1/1 station and will be followed by two additional stations, GE2/1 and ME0, to be installed in 2023 and 2026, respectively. The assembly and quality control of the GE1/1 detectors were distributed across several production sites around the world. We motivate and discuss the quality control procedures that were developed to standardize the performance of the detectors, and we present the final results of the production. Out of 161 detectors produced, 156 detectors passed all tests, and 144 detectors are now installed in the CMS experiment. The various visual inspections, gas tightness tests, intrinsic noise rate characterizations, and effective gas gain and response uniformity tests allowed the project to achieve this high success rate.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Influence of an external electric field on the energy dissipation at the initial stage of laser ablation
Authors:
S. Hirtle,
P. N. Terekhin,
M. Schäfer,
Y. Kang,
S. Ashok,
J. A. L'huillier,
B. Rethfeld
Abstract:
A density-dependent two-temperature model is applied to describe laser excitation and the following relaxation processes of silicon in an external electric field. Two approaches on how to describe the effects of the external electric field are presented. The first approach avoids the buildup of internal electric fields due to charge separation by assuming ambipolar diffusion and adds an additional…
▽ More
A density-dependent two-temperature model is applied to describe laser excitation and the following relaxation processes of silicon in an external electric field. Two approaches on how to describe the effects of the external electric field are presented. The first approach avoids the buildup of internal electric fields due to charge separation by assuming ambipolar diffusion and adds an additional carrier-pair current. In the second approach, electrons and holes are treated separately to account for charge separation and the resulting shielding of the external electric field inside the material. The two approaches are compared to experimental results. Both the first approach and the experimental results show similar tendencies for optimization of laser ablation in the external electric field.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
Mining Insights on Metal-Organic Framework Synthesis from Scientific Literature Texts
Authors:
Hyunsoo Park,
Yeonghun Kang,
Wonyoung Choe,
Jihan Kim
Abstract:
Identifying optimal synthesis conditions for metal-organic frameworks (MOFs) is a major challenge that can serve as a bottleneck for new materials discovery and development. Trial-and-error approach that relies on a chemist's intuition and knowledge has limitations in efficiency due to the large MOF synthesis space. To this end, 47,187 number of MOF were data mined using our in-house developed cod…
▽ More
Identifying optimal synthesis conditions for metal-organic frameworks (MOFs) is a major challenge that can serve as a bottleneck for new materials discovery and development. Trial-and-error approach that relies on a chemist's intuition and knowledge has limitations in efficiency due to the large MOF synthesis space. To this end, 47,187 number of MOF were data mined using our in-house developed code to extract their synthesis information in 28,565 MOF papers. The joint machine learning/rule-based algorithm yields an average F1 score of 90.3 % across different synthesis parameters (i.e. metal precursors, organic precursors, solvents, temperature, time, composition). From this data set, a PU learning algorithm was developed to predict synthesis of a given MOF material using synthesis conditions as inputs, and this algorithm successfully predicted successful synthesis in 83.1 % of the synthesized data in the test set. Finally, our model correctly predicted three amorphous MOFs (with their representative experimental synthesis condition) as having low synthesizability scores while the counterpart crystalline MOFs showed high synthesizability scores. Our results show that big data extracted from the texts of MOF papers can be used to rationally predict synthesis conditions for these materials, which can accelerate the speed in which new MOFs are synthesized.
△ Less
Submitted 30 August, 2021;
originally announced August 2021.
-
Performance of a Triple-GEM Demonstrator in $pp$ Collisions at the CMS Detector
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi,
O. Bouhali
, et al. (156 additional authors not shown)
Abstract:
After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstr…
▽ More
After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstrator GEM detectors were installed in CMS during 2017 to gain operational experience and perform a preliminary investigation of detector performance. We present the results of triple-GEM detector performance studies performed in situ during normal CMS and LHC operations in 2018. The distribution of cluster size and the efficiency to reconstruct high $p_T$ muons in proton--proton collisions are presented as well as the measurement of the environmental background rate to produce hits in the GEM detector.
△ Less
Submitted 22 September, 2021; v1 submitted 20 July, 2021;
originally announced July 2021.
-
Modeling the triple-GEM detector response to background particles for the CMS Experiment
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
I. Azhgirey,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi
, et al. (164 additional authors not shown)
Abstract:
An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The…
▽ More
An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The simulation framework uses a combination of the FLUKA and Geant4 packages to obtain the hit rate. FLUKA provides the radiation environment around the GE1/1 chambers, which is comprised of the particle flux with momentum direction and energy spectra ranging from $10^{-11}$ to $10^{4}$ MeV for neutrons, $10^{-3}$ to $10^{4}$ MeV for $γ$'s, $10^{-2}$ to $10^{4}$ MeV for $e^{\pm}$, and $10^{-1}$ to $10^{4}$ MeV for charged hadrons. Geant4 provides an estimate of detector response (sensitivity) based on an accurate description of detector geometry, material composition and interaction of particles with the various detector layers. The MC simulated hit rate is estimated as a function of the perpendicular distance from the beam line and agrees with data within the assigned uncertainties of 10-14.5%. This simulation framework can be used to obtain a reliable estimate of background rates expected at the High Luminosity LHC.
△ Less
Submitted 8 July, 2021;
originally announced July 2021.
-
Magnetic-field assisted laser ablation of silicon
Authors:
M. Schäfer,
P. N. Terekhin,
Y. Kang,
G. Torosyan,
X. del Arco Fargas,
S. Hirtle,
B. Rethfeld,
J. A. L'huillier
Abstract:
Understanding and manipulation of the laser processing quality during the ablation of solids have crucial importance from fundamental and industrial perspectives. Here we have studied the effect of external magnetic field on the micro-material processing of silicon by ultrashort laser pulses. It was found experimentally that such a field directed along the laser beam improves the quality and effic…
▽ More
Understanding and manipulation of the laser processing quality during the ablation of solids have crucial importance from fundamental and industrial perspectives. Here we have studied the effect of external magnetic field on the micro-material processing of silicon by ultrashort laser pulses. It was found experimentally that such a field directed along the laser beam improves the quality and efficiency of the material removal. Additionally, we observe that the formation of laser-induced periodic surface structures (LIPSS) in a multi-pulse regime is affected by the external magnetic field. Our results open a route towards efficient and controllable ultrafast laser micromachining.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
Wave Excitation and Dynamics in Non-Hermitian Disordered Systems
Authors:
Yiming Huang,
Yuhao Kang,
Azriel Z. Genack
Abstract:
Dynamic and steady state aspects of wave propagation are deeply connected in lossless open systems in which the scattering matrix is unitary. There is then an equivalence among the energy excited within the medium, the Wigner time delay, and the density of states. But these equivalences fall away in the presence of material loss or gain. In this paper, we use microwave measurements, numerical simu…
▽ More
Dynamic and steady state aspects of wave propagation are deeply connected in lossless open systems in which the scattering matrix is unitary. There is then an equivalence among the energy excited within the medium, the Wigner time delay, and the density of states. But these equivalences fall away in the presence of material loss or gain. In this paper, we use microwave measurements, numerical simulations, and theoretical analysis to discover the changing relationships among the internal field, transmission, transmission time, dwell time, total excited energy, and the density of states in with loss and gain, and their dependence upon dimensionality and spectral overlap. The total energy excited is equal to the dwell time. In 1D, the average transmission time is independent of loss, gain, and scattering strength. In higher dimensions, however, the average transmission time falls with loss, scattering strength and channel number, and increases with gain. It is the sum over Lorentzian functions associated with the zeros as well as the poles of the transmission matrix. This endows transmission zeros with robust topological characteristics: in unitary media, zeros occur either singly on the real axis or as conjugate pairs in the complex frequency plane. In weakly absorbing media, the spectrum of the transmission time of the lowest transmission eigenchannel is the sum of Lorentzians due to transmission zeros plus a background due to far-off-resonance poles. The average density of transmission zeros in the complex plane is found from the fall of the average transmission time with absorption as zeros are swept into the lower half of the complex frequency plane. We show that the disposition of poles and zeros in the complex frequency plane provides a framework for understanding and controlling wave propagation in non-Hermitian systems.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
Conservation laws for Electron Vortices in Strong-Field Ionisation
Authors:
Yuxin Kang,
Emilio Pisanty,
Marcelo Ciappina,
Maciej Lewenstein,
Carla Figueira de Morisson Faria,
Andrew S Maxwell
Abstract:
We investigate twisted electrons with a well defined orbital angular momentum, which have been ionised via a strong laser field. By formulating a new variant of the well-known strong field approximation, we are able to derive conservation laws for the angular momenta of twisted electrons in the cases of linear and circularly polarised fields. In the case of linear fields, we demonstrate that the o…
▽ More
We investigate twisted electrons with a well defined orbital angular momentum, which have been ionised via a strong laser field. By formulating a new variant of the well-known strong field approximation, we are able to derive conservation laws for the angular momenta of twisted electrons in the cases of linear and circularly polarised fields. In the case of linear fields, we demonstrate that the orbital angular momentum of the twisted electron is determined by the magnetic quantum number of the initial bound state. The condition for the circular field can be related to the famous ATI peaks, and provides a new interpretation for this fundamental feature of photoelectron spectra. We find the length of the circular pulse to be a vital factor in this selection rule and, employing an effective frequency, we show that the photoelectron OAM emission spectra is sensitive to the parity of the number of laser cycles. This work provides the basic theoretical framework with which to understand the OAM of a photoelectron undergoing strong field ionisation.
△ Less
Submitted 7 July, 2021; v1 submitted 15 February, 2021;
originally announced February 2021.
-
Estimation of transmitted wavefronts at defocused positions in a broad bandwidth range
Authors:
Haoyu Wang,
Qiyuan Zhang,
Fang Wang,
Chan Li,
Yiming Zhu,
Songlin Zhuang,
Yanhui Kang,
Yongjin Zhu,
Dahai Yu,
Sen Han
Abstract:
Wavefront aberrations can reflect the imaging quality of high-performance optical systems better than geometric aberrations. Although laser interferometers have emerged as the main tool for measurement of transmitted wavefronts, their application is greatly limited, as they are typically designed for operation at specific wavelengths. In a previous study, we proposed a method for determining the w…
▽ More
Wavefront aberrations can reflect the imaging quality of high-performance optical systems better than geometric aberrations. Although laser interferometers have emerged as the main tool for measurement of transmitted wavefronts, their application is greatly limited, as they are typically designed for operation at specific wavelengths. In a previous study, we proposed a method for determining the wavefront transmitted by an optical system at any wavelength in a certain band. Although this method works well for most monochromatic systems, where the image plane is at the focal point for the transmission wavelength, for general multi-color systems, it is more practical to measure the wavefront at the defocused image plane. Hence, in this paper, we have developed a complete method for determining transmitted wavefronts in a broad bandwidth at any defocused position, enabling wavefront measurements for multi-color systems. Here, we assume that in small ranges, the Zernike coefficients have a linear relationship with position, such that Zernike coefficients at defocused positions can be derived from measurements performed at the focal point. We conducted experiments to verify these assumptions, validating the new method. The experimental setup has been improved so that it can handle multi-color systems, and a detailed experimental process is summarized. With this technique, application of broadband transmission wavefront measurement can be extended to most general optical systems, which is of great significance for characterization of achromatic and apochromatic optical lenses.
△ Less
Submitted 19 February, 2021; v1 submitted 12 January, 2021;
originally announced January 2021.
-
Dynamics of transmission in disordered topological insulators
Authors:
Yuhao Kang,
Yiming Huang,
Azriel Z. Genack
Abstract:
Here we show in simulations of the Haldane model that pulse propagation in disordered topological insulators is robust throughout the central portion of the band gap where localized modes do not arise. Since transmission is robust in topological insulators, the essential field variable is the phase of the transmitted field, or, equivalently, its spectral derivative, which is the transmission time.…
▽ More
Here we show in simulations of the Haldane model that pulse propagation in disordered topological insulators is robust throughout the central portion of the band gap where localized modes do not arise. Since transmission is robust in topological insulators, the essential field variable is the phase of the transmitted field, or, equivalently, its spectral derivative, which is the transmission time. Except near resonances with bulk localized modes that couple the upper and lower edges of a topological insulator, the transmission time in a topological insulator is proportional to the density of states and to the energy excited within the sample. The average transmission time is enhanced in disordered TIs near the band edge and slightly suppressed in the center of the band gap. The variance of the transmission time at the band edge for a random ensemble with moderate disorder is dominated by fluctuations at resonances with localized states, and initially scales quadratically. When modes are absent, such as in the center of the band gap, the transmission time self-averages and its variance scales linearly. This leads to significant sample-to-sample fluctuations in the transmission time. However, because the transmission time is the sum of contributions from the continuum edge mode, which stretches across the band gap, and far-off-resonance modes near the band edge, there are no sharp features in the spectrum of transmission time in the center of the band gap. As a result, ultrashort, broadband pulses are faithfully transmitted in the center of the band gap of topological insulators with moderate disorder and bent paths. This allows for robust signal propagation in complex topological metawaveguides for applications in high-speed optoelectronics and telecommunications.
△ Less
Submitted 28 December, 2020;
originally announced December 2020.
-
Transmission zeros and ultrasensitive detection in complex systems
Authors:
Yuhao Kang,
Azriel Z. Genack
Abstract:
Understanding vanishing transmission in Fano resonances in quantum systems and metamaterials, and ultralow transmission in disordered media is key to elucidating optical interactions. Using analytic theory and numerical simulations, we discover the topological structure and motion under deformation of transmission zeros in the complex energy plane. We demonstrate the zeros can be controlled to cre…
▽ More
Understanding vanishing transmission in Fano resonances in quantum systems and metamaterials, and ultralow transmission in disordered media is key to elucidating optical interactions. Using analytic theory and numerical simulations, we discover the topological structure and motion under deformation of transmission zeros in the complex energy plane. We demonstrate the zeros can be controlled to create ultranarrow Lorentzian lines in spectra of transmission time and diverging rates of frequency change of transmission zeros as they converge. This suggests a new approach to ultrasensitive detection.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
Neutron Detection using a Gadolinium-Cathode GEM Detector
Authors:
DongHyun Song,
Kyungeon Choi,
Youngun Jeng,
Yechan Kang,
Jason Sang Hun Lee,
Inkyu Park,
Sunyoung Yoo
Abstract:
A gas electron multiplier (GEM) detector with a gadolinium cathode has been developed to explore its potential application as a neutron detector. It consists of three standard-sized ($10\times 10$ cm${}^{2}$) GEM foils and a thin gadolinium plate as the cathode, which is used as a neutron converter. The neutron detection efficiencies were measured for two different cathode setups and for two diffe…
▽ More
A gas electron multiplier (GEM) detector with a gadolinium cathode has been developed to explore its potential application as a neutron detector. It consists of three standard-sized ($10\times 10$ cm${}^{2}$) GEM foils and a thin gadolinium plate as the cathode, which is used as a neutron converter. The neutron detection efficiencies were measured for two different cathode setups and for two different drift gaps. The thermal neutron source at the Korea Research Institute of Standards and Science (KRISS) was used to measure the neutron detection efficiency. Based on the neutron flux measured by KRISS, the neutron detection efficiency of our gadolinium GEM detector was $4.630 \pm 0.034(stat.) \pm 0.279(syst.) \%$.
△ Less
Submitted 4 December, 2020;
originally announced December 2020.
-
Manipulating Twisted Electrons in Strong-Field Ionization
Authors:
A. S. Maxwell,
G. S. J. Armstrong,
M. F. Ciappina,
E. Pisanty,
Y. Kang,
A. C. Brown,
M. Lewenstein,
C. Figueira de Morisson Faria
Abstract:
We investigate the discrete orbital angular momentum (OAM) of photoelectrons freed in strongfield ionization. We use these `twisted' electrons to provide an alternative interpretation on existing experimental work of vortex interferences caused by strong field ionization mediated by two counterrotating circularly polarized pulses separated by a delay. Using the strong field approximation, we deriv…
▽ More
We investigate the discrete orbital angular momentum (OAM) of photoelectrons freed in strongfield ionization. We use these `twisted' electrons to provide an alternative interpretation on existing experimental work of vortex interferences caused by strong field ionization mediated by two counterrotating circularly polarized pulses separated by a delay. Using the strong field approximation, we derive an interference condition for the vortices. In computations for a neon target we find very good agreement of the vortex condition with photoelectron momentum distributions computed with the strong field approximation, as well as with the time-dependent methods Qprop and R-Matrix. For each of these approaches we examine the OAM of the photoelectrons, finding a small number of vortex states localized in separate energy regions. We demonstrate that the vortices arise from the interference of pairs of twisted electron states. The OAM of each twisted electron state can be directly related to the number of arms of the spiral in that region. We gain further understanding by recreating the vortices with pairs of twisted electrons and use this to determine a semiclassical relation for the OAM. A discussion is included on measuring the OAM in strong field ionization directly or by employing specific laser pulse schemes as well as utilizing the OAM in time-resolved imaging of photo-induced dynamics.
△ Less
Submitted 16 October, 2020;
originally announced October 2020.
-
Multiscale Dynamic Human Mobility Flow Dataset in the U.S. during the COVID-19 Epidemic
Authors:
Yuhao Kang,
Song Gao,
Yunlei Liang,
Mingxiao Li,
Jinmeng Rao,
Jake Kruse
Abstract:
Understanding dynamic human mobility changes and spatial interaction patterns at different geographic scales is crucial for assessing the impacts of non-pharmaceutical interventions (such as stay-at-home orders) during the COVID-19 pandemic. In this data descriptor, we introduce a regularly-updated multiscale dynamic human mobility flow dataset across the United States, with data starting from Mar…
▽ More
Understanding dynamic human mobility changes and spatial interaction patterns at different geographic scales is crucial for assessing the impacts of non-pharmaceutical interventions (such as stay-at-home orders) during the COVID-19 pandemic. In this data descriptor, we introduce a regularly-updated multiscale dynamic human mobility flow dataset across the United States, with data starting from March 1st, 2020. By analyzing millions of anonymous mobile phone users' visits to various places provided by SafeGraph, the daily and weekly dynamic origin-to-destination (O-D) population flows are computed, aggregated, and inferred at three geographic scales: census tract, county, and state. There is high correlation between our mobility flow dataset and openly available data sources, which shows the reliability of the produced data. Such a high spatiotemporal resolution human mobility flow dataset at different geographic scales over time may help monitor epidemic spreading dynamics, inform public health policy, and deepen our understanding of human behavior changes under the unprecedented public health crisis. This up-to-date O-D flow open data can support many other social sensing and transportation applications.
△ Less
Submitted 2 November, 2020; v1 submitted 27 August, 2020;
originally announced August 2020.
-
Mobile phone location data reveal the effect and geographic variation of social distancing on the spread of the COVID-19 epidemic
Authors:
Song Gao,
Jinmeng Rao,
Yuhao Kang,
Yunlei Liang,
Jake Kruse,
Doerte Doepfer,
Ajay K. Sethi,
Juan Francisco Mandujano Reyes,
Jonathan Patz,
Brian S. Yandell
Abstract:
The emergence of SARS-CoV-2 and the coronavirus infectious disease (COVID-19) has become a pandemic. Social (physical) distancing is a key non-pharmacologic control measure to reduce the transmission rate of SARS-COV-2, but high-level adherence is needed. Using daily travel distance and stay-at-home time derived from large-scale anonymous mobile phone location data provided by Descartes Labs and S…
▽ More
The emergence of SARS-CoV-2 and the coronavirus infectious disease (COVID-19) has become a pandemic. Social (physical) distancing is a key non-pharmacologic control measure to reduce the transmission rate of SARS-COV-2, but high-level adherence is needed. Using daily travel distance and stay-at-home time derived from large-scale anonymous mobile phone location data provided by Descartes Labs and SafeGraph, we quantify the degree to which social distancing mandates have been followed in the U.S. and its effect on growth of COVID-19 cases. The correlation between the COVID-19 growth rate and travel distance decay rate and dwell time at home change rate was -0.586 (95% CI: -0.742 ~ -0.370) and 0.526 (95% CI: 0.293 ~ 0.700), respectively. Increases in state-specific doubling time of total cases ranged from 1.04 ~ 6.86 days to 3.66 ~ 30.29 days after social distancing orders were put in place, consistent with mechanistic epidemic prediction models. Social distancing mandates reduce the spread of COVID-19 when they are followed.
△ Less
Submitted 23 April, 2020;
originally announced April 2020.
-
Mapping county-level mobility pattern changes in the United States in response to COVID-19
Authors:
Song Gao,
Jinmeng Rao,
Yuhao Kang,
Yunlei Liang,
Jake Kruse
Abstract:
To contain the Coronavirus disease (COVID-19) pandemic, one of the non-pharmacological epidemic control measures in response to the COVID-19 outbreak is reducing the transmission rate of SARS-COV-2 in the population through (physical) social distancing. An interactive web-based mapping platform that provides timely quantitative information on how people in different counties and states reacted to…
▽ More
To contain the Coronavirus disease (COVID-19) pandemic, one of the non-pharmacological epidemic control measures in response to the COVID-19 outbreak is reducing the transmission rate of SARS-COV-2 in the population through (physical) social distancing. An interactive web-based mapping platform that provides timely quantitative information on how people in different counties and states reacted to the social distancing guidelines was developed with the support of the National Science Foundation (NSF). It integrates geographic information systems (GIS) and daily updated human mobility statistical patterns derived from large-scale anonymized and aggregated smartphone location big data at the county-level in the United States, and aims to increase risk awareness of the public, support governmental decision-making, and help enhance community responses to the COVID-19 outbreak.
△ Less
Submitted 16 May, 2020; v1 submitted 9 April, 2020;
originally announced April 2020.
-
Estimation of Regional Economic Development Indicator from Transportation Network Analytics
Authors:
Bin Li,
Song Gao,
Yunlei Liang,
Yuhao Kang,
Timothy Prestby,
Yuqi Gao,
Runmou Xiao
Abstract:
With the booming economy in China, many researches have pointed out that the improvement of regional transportation infrastructure among other factors had an important effect on economic growth. Utilizing a large-scale dataset which includes 3.5 billion entry and exit records of vehicles along highways generated from toll collection systems, we attempt to establish the relevance of mid-distance la…
▽ More
With the booming economy in China, many researches have pointed out that the improvement of regional transportation infrastructure among other factors had an important effect on economic growth. Utilizing a large-scale dataset which includes 3.5 billion entry and exit records of vehicles along highways generated from toll collection systems, we attempt to establish the relevance of mid-distance land transport patterns to regional economic status through transportation network analyses. We apply standard measurements of complex networks to analyze the highway transportation networks. A set of traffic flow features are computed and correlated to the regional economic development indicator. The multi-linear regression models explain about 89% to 96% of the variation of cities' GDP across three provinces in China. We then fit gravity models using annual traffic volumes of cars, buses, and freight trucks between pairs of cities for each province separately as well as for the whole dataset. We find the temporal changes of distance-decay effects on spatial interactions between cities in transportation networks, which link to the economic development patterns of each province. We conclude that transportation big data reveal the status of regional economic development and contain valuable information of human mobility, production linkages, and logistics for regional management and planning. Our research offers insights into the investigation of regional economic development status using highway transportation big data.
△ Less
Submitted 3 February, 2020;
originally announced February 2020.
-
Time delay in a disordered topological system
Authors:
Yuhao Kang,
Azriel Z. Genack
Abstract:
The discovery of topological insulators has opened new prospects for robust signal transport for electronic, phononic, and photonic devices. Though transport of topological protected edge states is robust to disorder, large fluctuations and lengthened average delay time are observed. Here, we consider a quasi-1d system following the Haldane model and generalize the idea of eigenchannel time delay…
▽ More
The discovery of topological insulators has opened new prospects for robust signal transport for electronic, phononic, and photonic devices. Though transport of topological protected edge states is robust to disorder, large fluctuations and lengthened average delay time are observed. Here, we consider a quasi-1d system following the Haldane model and generalize the idea of eigenchannel time delay to the topological system. Eigenchannel time delay indicates the excited density of states for the configuration and relates to the intensity integral inside the system. Taking advantage of this property, we point out a practical way to extract the central frequency and linewidth of localized modes excited in the topological system. This work links the fluctuation of time delay to the strength of disorder and discusses the scaling of time delay.
△ Less
Submitted 11 December, 2019;
originally announced December 2019.
-
Natural-mixing guided design of refractory high-entropy alloys with as-cast tensile ductility
Authors:
Shaolou Wei,
Sang Jun Kim,
Ji Yun Kang,
Yong Zhang,
Yongjie Zhang,
Tadashi Furuhara,
Eun Soo Park,
Cemal Cem Tasan
Abstract:
Multi-principal-element metallic alloys have created a growing interest that is unprecedented in metallurgical history, in exploring the property limits of metals and the governing physical mechanisms. Refractory high-entropy alloys (RHEAs) have drawn particular attention due to their (i) high melting points and excellent softening-resistance, which are the two key requirements for high-temperatur…
▽ More
Multi-principal-element metallic alloys have created a growing interest that is unprecedented in metallurgical history, in exploring the property limits of metals and the governing physical mechanisms. Refractory high-entropy alloys (RHEAs) have drawn particular attention due to their (i) high melting points and excellent softening-resistance, which are the two key requirements for high-temperature applications; and (ii) compositional space, which is immense even after considering cost and recyclability restrictions. However, RHEAs also exhibit intrinsic brittleness and oxidation-susceptibility, which remain as significant challenges for their processing and application. Here, utilizing natural-mixing characteristics amongst refractory elements, we designed a Ti38V15Nb23Hf24 RHEA that exhibits >20% tensile ductility already at the as-cast state, and physicochemical stability at high-temperatures. Exploring the underlying deformation mechanisms across multiple length-scales, we observe that a rare beta prime precipitation strengthening mechanism governs its intriguing mechanical response. These results also reveal the effectiveness of natural-mixing tendencies in expediting HEA discovery.
△ Less
Submitted 25 November, 2019;
originally announced November 2019.
-
Cavity-induced backscattering in a two-dimensional photonic topological system
Authors:
Yuhao Kang,
Azriel Z. Genack
Abstract:
The discovery of robust transport via topological states in electronic, photonic and phononic materials has deepened our understanding of wave propagation in condensed matter with prospects for critical applications of engineered metamaterials in communications, sensing, and controlling the environment. Topological protection of transmission has been demonstrated in the face of bent paths and on-s…
▽ More
The discovery of robust transport via topological states in electronic, photonic and phononic materials has deepened our understanding of wave propagation in condensed matter with prospects for critical applications of engineered metamaterials in communications, sensing, and controlling the environment. Topological protection of transmission has been demonstrated in the face of bent paths and on-site randomness in the structure. Here we measure the propagation of microwave radiation in a topological medium possessing time reversal symmetry with a cavity adjacent to the edge channel. A coupled-resonance model analysis shows that the cavity is not a spin-conserving defect and gives rise to negative time delay in transmission.
△ Less
Submitted 13 November, 2019;
originally announced November 2019.
-
Core-Shell Nanofiber Containing Large Amount of Flame Retardants via Coaxial Dual-Nozzle Electrospinning as Battery Separators
Authors:
Yun Zhao,
Yuqing Chen,
Yuqiong Kang,
Li Wang,
Shaobin Yang,
Zheng Liang,
Yanxi Li
Abstract:
Lithium-ion batteries have attracted enormous interests recently as promising power sources. However, the safety issue associated with the employment of highly flammable liquid electrolyte impedes the further development of next-generation lithium-ion batteries. Recently, researchers reported the use of electrospun core-shell fiber as the battery separator consisting of polymer layer as protective…
▽ More
Lithium-ion batteries have attracted enormous interests recently as promising power sources. However, the safety issue associated with the employment of highly flammable liquid electrolyte impedes the further development of next-generation lithium-ion batteries. Recently, researchers reported the use of electrospun core-shell fiber as the battery separator consisting of polymer layer as protective shell and flame retardants loaded inside as core. In case of a typical battery shorting, the protective polymer shell melts during thermal-runaway and the flame retardants inside would be released to suppress the combustion of the electrolyte. Due to the use of a single precursor solution for electrospinning containing both polymer and flame retardants, the weight ratio of flame retardants is limited and dependent. Herein, we developed a dual-nozzle, coaxial electrospinning approach to fabricate the core-shell nanofiber with a greatly enhanced flame retardants weight percentage in the final fibers. The weight ratio of flame retardants of triphenyl phosphate in the final composite reaches over 60 wt.%. The LiFePO4-based cell using this composite nanofiber as battery separator exhibits excellent flame-retardant property without compromising the cycling stability or rate performances. In addition, this functional nanofiber can also be coated onto commercial separators instead of being used directly as separators.
△ Less
Submitted 23 September, 2019;
originally announced September 2019.
-
Epidemics on Networks: Reducing Disease Transmission Using Health Emergency Declarations and Peer Communication
Authors:
Asma Azizi,
Cesar Montalvo,
Baltazar Espinoza,
Yun Kang,
Carlos Castillo-Chavez
Abstract:
Understanding individual decisions in a world where communications and information move instantly via cell phones and the internet, contributes to the development and implementation of policies aimed at stopping or ameliorating the spread of diseases. In this manuscript, the role of official social network perturbations generated by public health officials to slow down or stop a disease outbreak a…
▽ More
Understanding individual decisions in a world where communications and information move instantly via cell phones and the internet, contributes to the development and implementation of policies aimed at stopping or ameliorating the spread of diseases. In this manuscript, the role of official social network perturbations generated by public health officials to slow down or stop a disease outbreak are studied over distinct classes of static social networks. The dynamics are stochastic in nature with individuals (nodes) being assigned fixed levels of education or wealth. Nodes may change their epidemiological status from susceptible, to infected and to recovered. Most importantly, it is assumed that when the prevalence reaches a pre-determined threshold level, P*, information, called awareness in our framework, starts to spread, a process triggered by public health authorities. Information is assumed to spread over the same static network and whether or not one becomes a temporary informer, is a function of his/her level of education or wealth and epidemiological status. Stochastic simulations show that threshold selection P* and the value of the average basic reproduction number impact the final epidemic size differentially. For the Erdos-Renyi and Small-world networks, an optimal choice for P* that minimize the final epidemic size can be identified under some conditions while for Scale-free networks this is not case.
△ Less
Submitted 29 April, 2019;
originally announced May 2019.
-
Negative ion radio frequency surface plasma source with solenoidal magnetic field
Authors:
V. Dudnikov,
R. P. Johnson,
B. Han,
Y. Kang,
S. Murray,
T. Pennisi,
C. Piller,
C. Stinson,
M. Stockli,
R. Welton,
G. Dudnikova
Abstract:
Pulsed and CW operation of negative ion radio frequency surface plasma source with a solenoidal magnetic field is described. Dependences of a beam current on RF power, extraction voltage, solenoid magnetic field, gas flow are presented. Compact design of RF SPS is presented.
Pulsed and CW operation of negative ion radio frequency surface plasma source with a solenoidal magnetic field is described. Dependences of a beam current on RF power, extraction voltage, solenoid magnetic field, gas flow are presented. Compact design of RF SPS is presented.
△ Less
Submitted 17 August, 2018;
originally announced August 2018.
-
RF Positive Ion Source with Solenoidal Magnetic Field
Authors:
V. Dudnikov,
R. P. Johnson,
B. Han,
Y. Kang,
S. Murray,
T. Pennisi,
C. Piller,
C. Stinson,
M. Stockli,
R. Welton,
G. Dudnikova
Abstract:
A positive ion source with RF discharge in solenoidal magnetic field is described. In this paper we present an overview of positive ion production in saddle antenna (helicon discharge) radio frequency (SA RF) ion sources. The efficiency of H+ ion production in recently developed RF sources with solenoidal antennas was improved to 2.9 mA/kW. About 24 kW of RF power is typically needed for 70 mA bea…
▽ More
A positive ion source with RF discharge in solenoidal magnetic field is described. In this paper we present an overview of positive ion production in saddle antenna (helicon discharge) radio frequency (SA RF) ion sources. The efficiency of H+ ion production in recently developed RF sources with solenoidal antennas was improved to 2.9 mA/kW. About 24 kW of RF power is typically needed for 70 mA beam current production from a 7 mm emission aperture. This efficiency is relatively low because in the RF discharge with a solenoidal antenna, the plasma is generated near the coil and diffuses to the axis creating a nearly uniform plasma density distribution in all cross sections of the discharge chamber, when the plasma flow is necessary only near an emission aperture. The efficiency of the extracted ion generation was improved significantly by using a saddle antenna with solenoidal magnetic field. In the RF discharge with the saddle antenna the plasma is generated near the axis and the magnetic field suppress the plasma diffusion from the axis, creating a peaked plasma density distribution on the emission aperture. With the SA the efficiency of positive ion generation in the plasma has been improved up to ~100 mA/cm2 per kW of RF power at 13.56 MHz. Continuous wave (CW) operation of the RF source has been tested on the small ORNL SNS test stand. The general design of the CW RF source is based on the pulsed version. A compact design of ion source is presented. Some modifications were made to improve the cooling and to simplify the design. Features of SA RF discharges and ion generation are discussed.
△ Less
Submitted 8 August, 2018;
originally announced August 2018.
-
Pseudospin-valley coupled edge states in a photonic topological insulator
Authors:
Yuhao Kang,
Xiaojun Cheng,
Xiang Ni,
Alexander B. Khanikaev,
Azriel Z. Genack
Abstract:
Pseudo-spin and valley degrees of freedom (DOFs) engineered in photonic analogues of topological insulators (TI) provide potential approaches to optical encoding and robust signal transport. Here we observe a ballistic edge state whose spin-valley indices are locked to the direction of propagation along the interface between a valley photonic crystal and a metacrystal emulating the quantum spin Ha…
▽ More
Pseudo-spin and valley degrees of freedom (DOFs) engineered in photonic analogues of topological insulators (TI) provide potential approaches to optical encoding and robust signal transport. Here we observe a ballistic edge state whose spin-valley indices are locked to the direction of propagation along the interface between a valley photonic crystal and a metacrystal emulating the quantum spin Hall effect. We demonstrate the inhibition of inter-valley scattering at a Y-junction formed at the interfaces between photonic TIs carrying different spin-valley Chern numbers. These results open up the possibility of using the valley DOF to control the flow of optical signals in 2D structures.
△ Less
Submitted 8 April, 2018;
originally announced April 2018.
-
Titanium dioxide hole-blocking layer in ultra-thin-film crystalline silicon solar cells
Authors:
Yangsen Kang,
Huiyang Deng,
Yusi Chen,
Yijie Huo,
Jieyang Jia,
Li Zhao,
Zain Zaidi,
Kai Zang,
James S. Harris
Abstract:
One of the remaining obstacles to approaching the theoretical efficiency limit of crystalline silicon (c-Si) solar cells is the exceedingly high interface recombination loss for minority carriers at the Ohmic contacts. In ultra-thin-film c-Si solar cells, this contact recombination loss is far more severe than for traditional thick cells due to the smaller volume and higher minority carrier concen…
▽ More
One of the remaining obstacles to approaching the theoretical efficiency limit of crystalline silicon (c-Si) solar cells is the exceedingly high interface recombination loss for minority carriers at the Ohmic contacts. In ultra-thin-film c-Si solar cells, this contact recombination loss is far more severe than for traditional thick cells due to the smaller volume and higher minority carrier concentration of the former. This paper presents a novel design of an electron passing (Ohmic) contact to n-type Si that is hole-blocking with significantly reduced hole recombination. This contact is formed by depositing a thin titanium dioxide (TiO2) layer to form a silicon metal-insulator-semiconductor (MIS) contact. A 2 μm thick Si cell with this TiO2 MIS contact achieved an open circuit voltage (Voc) of 645 mV, which is 10 mV higher than that of an ultra-thin cell with a metal contact. This MIS contact demonstrates a new path for ultra-thin-film c-Si solar cells to achieve high efficiencies as high as traditional thick cells, and enables the fabrication of high-efficiency c-Si solar cells at a lower cost.
△ Less
Submitted 9 May, 2017;
originally announced May 2017.
-
Broadband Multifocal Conic-Shaped Metalens
Authors:
Yanjun Bao,
Qiao Jiang,
Yimin Kang,
Xing Zhu,
Zheyu Fang
Abstract:
Multifocal lens, which focus incident light at multiple foci, are widely used in imaging systems and optical communications. However, for the traditional design strategy, it combines several lenses that have different focal points into a planar integrated unit, resulting a low imaging quality due to the high background noise. Here, we propose two kinds of multifocal metalens with Au nanoslits arra…
▽ More
Multifocal lens, which focus incident light at multiple foci, are widely used in imaging systems and optical communications. However, for the traditional design strategy, it combines several lenses that have different focal points into a planar integrated unit, resulting a low imaging quality due to the high background noise. Here, we propose two kinds of multifocal metalens with Au nanoslits arranged in an elliptical and a hyperbolic shape, which are able to effectively focus incident light at all of the foci with constructive interference, and extremely decrease the background noise and improve the lens imaging performance at the nanoscale. We further demonstrate that, the proposed metalens can possess a broadband operation wavelength changed from 600 nm to 900 nm, with its dual-polarity actively controlled by the incident circular polarization lights. With great agreement between the experimental and simulation results, our proposed conic-shaped metalens provides a significant potential for the future integrated nanophotonic device.
△ Less
Submitted 11 October, 2016; v1 submitted 30 June, 2016;
originally announced June 2016.
-
Evaluation of the clinical usefulness of modulated Arc treatment
Authors:
Young Kyu Lee,
Hong Seok Jang,
Yeon Sil Kim,
Byung Ock Choi,
Sang Hee Nam,
Hyeong Wook Park,
Shin Wook Kim,
Hun Joo Shin,
Jae Choon Lee,
Ji Na Kim,
Sung Kwang Park,
Jin Young Kim,
Young-Nam Kang
Abstract:
The purpose of this study is to evaluate the clinical usefulness of modulated arc (mARC) treatment techniques. The mARC treatment plans of the non-small cell lung cancer (NSCLC) patients were performed in order to verify the clinical usefulness of mARC. A pre study was conducted to find the most competent plan condition of mARC treatment and the usefulness of mARC treatment plan was evaluated by c…
▽ More
The purpose of this study is to evaluate the clinical usefulness of modulated arc (mARC) treatment techniques. The mARC treatment plans of the non-small cell lung cancer (NSCLC) patients were performed in order to verify the clinical usefulness of mARC. A pre study was conducted to find the most competent plan condition of mARC treatment and the usefulness of mARC treatment plan was evaluated by comparing it with the other Arc treatment plans such as Tomotherapy and RapidArc. In the case of mARC, the optimal condition for the mARC plan was determined by comparing the dosimetric performance of the mARC plans with the use of various parameters. The various parameters includes the photon energies (6 MV, 10 MV), optimization point angle (6°-10° intervals), and total segment number (36-59 segment). The best dosimetric performance of mARC was observed at 10 MV photon energy and the point angle 6 degree, and 59 segments. The each treatment plans of three different techniques were compared with the following parameters: conformity index (CI), homogeneity index (HI), target coverage, dose in the OARs, monitor units (MU), beam on time and the normal tissue complication probability (NTCP). As a result, all three different treatment techniques show the similar target coverage. The mARC results the lowest V20 and MU per fraction compared with both RapidArc and Tomotherapy plan. The mARC plan reduces the beam on time as well. Therefore, the results of this study provided a satisfactory result which mARC technique is considered as a useful clinical technique for radiation treatment.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
Evaluation of Elekta SymmetryTM 4D IGRT system by using moving lung phantom
Authors:
Hun-Joo Shin,
Shin-Wook Kim,
Chul Seung Kay,
Jae-Hyuk Seo,
Gi-Woong Lee,
Ki-Mun Kang,
Hong Seok Jang,
Young-nam Kang
Abstract:
Purpose: 4D CBCT is a beneficial tool for the treatment of movable tumors, because it can help us to understand where the tumors are actually located and have a precise treatment plan. However, there is a limitation that general CBCT images cannot perfectly help the sophisticated registration. On the other hand, SymmetryTM 4D IGRT system of Elekta can offer the 4D CBCT registration option. In this…
▽ More
Purpose: 4D CBCT is a beneficial tool for the treatment of movable tumors, because it can help us to understand where the tumors are actually located and have a precise treatment plan. However, there is a limitation that general CBCT images cannot perfectly help the sophisticated registration. On the other hand, SymmetryTM 4D IGRT system of Elekta can offer the 4D CBCT registration option. In this study, we intend to evaluate the usefulness of SymmetryTM. Method and Materials: Planning CT images of the CIRS moving lung phantom were acquired from 4D MDCT. And they are sorted as 10 phases from 0% phase to 90% phase. The thickness of CT images was 1 mm. Acquired MDCT images were transferred to the contouring software and a virtual target was generated. An one arc VMAT plan was performed by using the treatment planning system on the virtual target. Finally, the movement of the phantom was verified through XVI SymmetryTM system. Results: The physical movement of CIRS moving lung phantom was +/- 10.0 mm in superior-inferior direction, +/- 1.0 mm in lateral direction, and +/- 2.5 mm in anterior-posterior direction. The movement of the phantom was measured from 4D MDCT registration as +/- 10.2 mm in superior-inferior direction, +/- 0.9 mm in lateral direction, and +/- 2.45 mm in anterior-posterior direction. The movement of the phantom was measured from SymmetryTM registration as +/- 10.1 mm in superior-inferior direction, +/- 0.9 mm in lateral direction, and +/- 2.4 mm in anterior/posterior direction. Conclusion: It is confirmed that 4D CBCT is a beneficial tool for the treatment of movable tumors. Therefore, 4D registration of SymmetryTM can increase the precision of the registration when a movable tumor is a target of radiation treatment.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
Measurement Limits to 134Cs Concentration in Soil
Authors:
J. K. Ahn,
J. S. Kim,
H. M. Lee,
T. H. Kim,
J. N. Park,
Y. S. Kang,
H. S. Lee,
S. J. Kim,
J. Y. Park,
S. Y. Ryu,
H. Ch. Kim,
W. G. Kang,
S. K. Kim
Abstract:
We investigate the caesium concentrations in soils in mountain areas near Gori nuclear power plant in Korea, focusing on the measurement limits to the 134Cs. In order to lower the minimum detectable amount (MDA) of activity for the 134Cs, we have used the ammonium molybdophosphase (AMP) precipitation method to get rid of the 40K existing in natural radioactivity, which reduces the MDA activity abo…
▽ More
We investigate the caesium concentrations in soils in mountain areas near Gori nuclear power plant in Korea, focusing on the measurement limits to the 134Cs. In order to lower the minimum detectable amount (MDA) of activity for the 134Cs, we have used the ammonium molybdophosphase (AMP) precipitation method to get rid of the 40K existing in natural radioactivity, which reduces the MDA activity about ten times smaller than those without the AMP precipitation method. The MDA results for the 134Cs were found to be in the range between 0.015 and 0.044 Bq/kg-dry weight. In order to diminish the background, we also have measured a part of the soil samples in Yangyang, a small town in the east coast of Korea. However, it turns out that in order to detect the 134Cs in the samples the MDA should be reduced to the level of mBq/kg-dry weight.
△ Less
Submitted 22 December, 2011; v1 submitted 10 January, 2009;
originally announced January 2009.
-
A Novel Method for the Solution of the Schroedinger Eq. in the Presence of Exchange Terms
Authors:
G. H. Rawitscher,
S. Y. Kang,
I. Koltracht,
E. Zerrad,
K. Zerrad,
B. T. Kim,
T. Udagawa
Abstract:
In the Hartree-Fock approximation the Pauli exclusion principle leads to a Schroedinger Eq. of an integro-differential form. We describe a new spectral noniterative method (S-IEM), previously developed for solving the Lippman-Schwinger integral equation with local potentials, which has now been extended so as to include the exchange nonlocality. We apply it to the restricted case of electron-Hyd…
▽ More
In the Hartree-Fock approximation the Pauli exclusion principle leads to a Schroedinger Eq. of an integro-differential form. We describe a new spectral noniterative method (S-IEM), previously developed for solving the Lippman-Schwinger integral equation with local potentials, which has now been extended so as to include the exchange nonlocality. We apply it to the restricted case of electron-Hydrogen scattering in which the bound electron remains in the ground state and the incident electron has zero angular momentum, and we compare the acuracy and economy of the new method to three other methods. One is a non-iterative solution (NIEM) of the integral equation as described by Sams and Kouri in 1969. Another is an iterative method introduced by Kim and Udagawa in 1990 for nuclear physics applications, which makes an expansion of the solution into an especially favorable basis obtained by a method of moments. The third one is based on the Singular Value Decomposition of the exchange term followed by iterations over the remainder. The S-IEM method turns out to be more accurate by many orders of magnitude than any of the other three methods described above for the same number of mesh points.
△ Less
Submitted 29 January, 2002;
originally announced January 2002.
-
Efficient Design Scheme of Superconducting Cavity
Authors:
Sang-ho Kim,
Marc Doleans,
Yoon Kang
Abstract:
For many next-generation high intensity proton accelerator applications including the Spallation Neutron Source (SNS), superconducting (SC) RF provides the technology of choice for the linac. In designing the superconducting cavity, several features, such as peak fields, inter-cell coupling, mechanical stiffness, field flatness, external Q, manufacturability, shunt impedance, higher order mode (…
▽ More
For many next-generation high intensity proton accelerator applications including the Spallation Neutron Source (SNS), superconducting (SC) RF provides the technology of choice for the linac. In designing the superconducting cavity, several features, such as peak fields, inter-cell coupling, mechanical stiffness, field flatness, external Q, manufacturability, shunt impedance, higher order mode (HOM), etc., should be considered together. A systematic approach to determine the optimum cavity shape by exploring the entire geometric space of the cavity has been found. The most efficient use of RF energy can be accomplished by adjusting the cell shape. A small region in parameter space satisfying all reasonable design criteria has been found. With this design procedure, choosing the optimum shape is simplified. In this paper, the whole design procedure of this optimisation scheme is explained and applied to the SNS cavity design.
△ Less
Submitted 21 August, 2000;
originally announced August 2000.
-
Testing and Implementation Progress on the Advanced Photon Source (APS) Linear Accelerator (Linac) High-Power S-band Switching System
Authors:
A. E. Grelick,
N. Arnold,
S. Berg,
D. Dohan,
G. Goeppner,
Y. W. Kang,
A. Nassiri,
S. Pasky,
G. Pile,
T. Smith,
S. J. Stein
Abstract:
An S-band linear accelerator is the source of particles and the front end of the Advanced Photon Source injector. In addition, it supports a low-energy undulator test line (LEUTL) and drives a free-electron laser (FEL). A waveguide-switching and distribution system is now under construction. The system configuration was revised to be consistent with the recent change to electron-only operation.…
▽ More
An S-band linear accelerator is the source of particles and the front end of the Advanced Photon Source injector. In addition, it supports a low-energy undulator test line (LEUTL) and drives a free-electron laser (FEL). A waveguide-switching and distribution system is now under construction. The system configuration was revised to be consistent with the recent change to electron-only operation. There are now six modulator-klystron subsystems, two of which are being configured to act as hot spares for two S-band transmitters each, so that no single failure will prevent injector operation. The two subsystems are also used to support additional LEUTL capabilities and off-line testing. Design considerations for the waveguide-switching subsystem, topology selection, control and protection provisions, high-power test results, and current status are described
△ Less
Submitted 18 August, 2000;
originally announced August 2000.
-
Photonic quantum ring laser
Authors:
J. C. Ahn,
K. S. Kwak,
B. H. Park,
H. Y. Kang,
J. Y. Kim,
O'Dae Kwon
Abstract:
We report a quantum ring-like toroidal cavity naturally formed in a vertical-cavity-like active microdisk plane due to Rayleigh's band of whispering gallery modes. The $\sqrt{T}$-dependent redshift and a square-law property of microampere-range threshold currents down to 2 $μ$A are consistent with a photonic quantum wire view, due to whispering gallery mode-induced dimensional reduction.
We report a quantum ring-like toroidal cavity naturally formed in a vertical-cavity-like active microdisk plane due to Rayleigh's band of whispering gallery modes. The $\sqrt{T}$-dependent redshift and a square-law property of microampere-range threshold currents down to 2 $μ$A are consistent with a photonic quantum wire view, due to whispering gallery mode-induced dimensional reduction.
△ Less
Submitted 20 December, 1998; v1 submitted 28 November, 1998;
originally announced November 1998.