Showing 1–50 of 60 results for author: Schäfer, M

Continuous momentum state lasing and cavity frequency-pinning with laser-cooled strontium atoms

Authors: V. M. Schäfer, Z. Niu, J. R. K. Cline, D. J. Young, E. Y. Song, H. Ritsch, J. K. Thompson

Abstract: Laser-cooled gases of atoms interacting with the field of an optical cavity are a powerful tool for quantum sensing and the simulation of open and closed quantum systems. They can display spontaneous self-organisation phase transitions, time crystals, new lasing mechanisms, squeezed states for quantum sensing, protection of quantum coherence, and dynamical phase transitions. However, all of these… ▽ More Laser-cooled gases of atoms interacting with the field of an optical cavity are a powerful tool for quantum sensing and the simulation of open and closed quantum systems. They can display spontaneous self-organisation phase transitions, time crystals, new lasing mechanisms, squeezed states for quantum sensing, protection of quantum coherence, and dynamical phase transitions. However, all of these phenomena are explored in a discontinuous manner due to the need to stop and reload a new ensemble of atoms. Here we report the observation of hours-long continuous lasing from laser-cooled $^{88}$Sr atoms continuously loaded into a ring cavity. The required inversion to produce lasing arises from inversion in the atomic momentum degree of freedom, a mechanism related directly to self-organization phase transitions and collective atomic recoil lasing, both of which were previously only observed in a cyclic fashion compared to the truly continuous behavior here. Further, the sensitivity of the lasing frequency to cavity frequency changes is 120 fold suppressed due to an atomic loss mechanism, opening an interesting new path to compensate cavity frequency noise for realizing narrow frequency references. This work opens the way for continuous cavity QED quantum simulation experiments as well as continuous superradiant lasers. △ Less

Submitted 31 May, 2024; originally announced May 2024.

Comments: 10 pages, 5 figures

High fidelity distribution of triggered polarization-entangled telecom photons via a 36km intra-city fiber network

Authors: Tim Strobel, Stefan Kazmaier, Tobias Bauer, Marlon Schäfer, Ankita Choudhary, Nand Lal Sharma, Raphael Joos, Cornelius Nawrath, Jonas H. Weber, Weijie Nie, Ghata Bhayani, Lukas Wagner, André Bisquerra, Marc Geitz, Ralf-Peter Braun, Caspar Hopfmann, Simone L. Portalupi, Christoph Becher, Peter Michler

Abstract: Fiber-based distribution of triggered, entangled, single-photon pairs is a key requirement for the future development of terrestrial quantum networks. In this context, semiconductor quantum dots (QDs) are promising candidates for deterministic sources of on-demand polarization-entangled photon pairs. So far, the best QD polarization-entangled-pair sources emit in the near-infrared wavelength regim… ▽ More Fiber-based distribution of triggered, entangled, single-photon pairs is a key requirement for the future development of terrestrial quantum networks. In this context, semiconductor quantum dots (QDs) are promising candidates for deterministic sources of on-demand polarization-entangled photon pairs. So far, the best QD polarization-entangled-pair sources emit in the near-infrared wavelength regime, where the transmission distance in deployed fibers is limited. Here, to be compatible with existing fiber network infrastructures, bi-directional polarization-conserving quantum frequency conversion (QFC) is employed to convert the QD emission from \unit[780]{nm} to telecom wavelengths. We show the preservation of polarization entanglement after QFC (fidelity to Bell state $F_{φ^+, conv}=0.972\pm0.003$) of the biexciton transition. As a step towards real-world applicability, high entanglement fidelities ($F_{φ^+, loop}=0.945\pm0.005$) after the propagation of one photon of the entangled pair along a \unit[35.8]{km} field installed standard single mode fiber link are reported. Furthermore, we successfully demonstrate a second polarization-conversing QFC step back to \unit[780]{nm} preserving entanglement ($F_{φ^+, back}=0.903\pm0.005$). This further prepares the way for interfacing quantum light to various quantum memories. △ Less

Submitted 27 May, 2024; v1 submitted 23 May, 2024; originally announced May 2024.

Photoluminescence of Femtosecond Laser-irradiated Silicon Carbide

Authors: Y. Abdedou, A. Fuchs, P. Fuchs, D. Herrmann, S. Weber, M. Schäfer, J. L'huillier, C. Becher, E. Neu

Abstract: Silicon carbide (SiC) is the leading wide-bandgap semiconductor material, providing mature doping and device fabrication. Additionally, SiC hosts a multitude of optically active point defects (color centers), it is an excellent material for optical resonators due to its high refractive index and an outstanding material for mechanical resonators due to its high Q/f product. Moreover, epitaxial grap… ▽ More Silicon carbide (SiC) is the leading wide-bandgap semiconductor material, providing mature doping and device fabrication. Additionally, SiC hosts a multitude of optically active point defects (color centers), it is an excellent material for optical resonators due to its high refractive index and an outstanding material for mechanical resonators due to its high Q/f product. Moreover, epitaxial graphene layers can be grown as ultrathin electrodes and provide the potential to fine-tune color center resonances. These characteristics render SiC an ideal platform for experiments with single color centers towards quantum technologies including coupling color centers towards cooperative effects. A crucial step towards harnessing the full potential of the SiC platform includes technologies to create color centers with defined localization and density, e.g.\ to facilitate their coupling to nano-photonic structures and to observe cooperative effects. Here, silicon vacancy centers (V$_{Si}$) stand out as no impurity atom is needed and high-thermal budget annealing steps can be avoided. We characterize the effect of localized, femtosecond laser irradiation of SiC, investigating surface modifications and photoluminescence including Raman spectroscopy and optical lifetime measurements. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Comments: 7 pages, 6 figures

Demonstration of quantum network protocols over a 14-km urban fiber link

Authors: Stephan Kucera, Christian Haen, Elena Arenskötter, Tobias Bauer, Jonas Meiers, Marlon Schäfer, Ross Boland, Milad Yahyapour, Maurice Lessing, Ronald Holzwarth, Christoph Becher, Jürgen Eschner

Abstract: We report on the implementation of quantum entanglement distribution and quantum state teleportation over a 14.4-km urban dark-fiber link, which is partially underground, partially overhead, and patched in several stations. We characterize the link for its use as a quantum channel and realize its active polarization stabilization. Using a type-II cavity-enhanced SPDC photon pair source, a $^{40}$C… ▽ More We report on the implementation of quantum entanglement distribution and quantum state teleportation over a 14.4-km urban dark-fiber link, which is partially underground, partially overhead, and patched in several stations. We characterize the link for its use as a quantum channel and realize its active polarization stabilization. Using a type-II cavity-enhanced SPDC photon pair source, a $^{40}$Ca$^{+}$ single-ion quantum memory, and quantum frequency conversion to the telecom C-band, we demonstrate photon-photon entanglement, ion-photon entanglement, and teleportation of a qubit state from the ion onto a remote telecom photon, all realized over the urban fiber link. △ Less

Submitted 7 April, 2024; originally announced April 2024.

Comments: 14 pages, 13 figures, including appendix

Accelerating fourth-generation machine learning potentials by quasi-linear scaling particle mesh charge equilibration

Authors: Moritz Gubler, Jonas A. Finkler, Moritz R. Schäfer, Jörg Behler, Stefan Goedecker

Abstract: Machine learning potentials (MLP) have revolutionized the field of atomistic simulations by describing the atomic interactions with the accuracy of electronic structure methods at a small fraction of the costs. Most current MLPs construct the energy of a system as a sum of atomic energies, which depend on information about the atomic environments provided in form of predefined or learnable feature… ▽ More Machine learning potentials (MLP) have revolutionized the field of atomistic simulations by describing the atomic interactions with the accuracy of electronic structure methods at a small fraction of the costs. Most current MLPs construct the energy of a system as a sum of atomic energies, which depend on information about the atomic environments provided in form of predefined or learnable feature vectors. If, in addition, non-local phenomena like long-range charge transfer are important, fourth-generation MLPs need to be used, which include a charge equilibration (Qeq) step to take the global structure of the system into account. This Qeq can significantly increase the computational cost and thus can become the computational bottleneck for large systems. In this paper we present a highly efficient formulation of Qeq that does not require the explicit computation of the Coulomb matrix elements resulting in a quasi-linearly scaling method. Moreover, our approach also allows for the efficient calculation of energy derivatives, which explicitly consider the global structure-dependence of the atomic charges as obtained from Qeq. Due to its generality, the method is not restricted to MLPs but can also be applied within a variety of other force fields. △ Less

Submitted 15 March, 2024; v1 submitted 4 March, 2024; originally announced March 2024.

ITRUSST Consensus on Standardised Reporting for Transcranial Ultrasound Stimulation

Authors: Eleanor Martin, Jean-François Aubry, Mark Schafer, Lennart Verhagen, Bradley Treeby, Kim Butts Pauly

Abstract: As transcranial ultrasound stimulation (TUS) advances as a precise, non-invasive neuromodulatory method, there is a need for consistent reporting standards to enable comparison and reproducibility across studies. To this end, the International Transcranial Ultrasonic Stimulation Safety and Standards Consortium (ITRUSST) formed a subcommittee of experts across several domains to review and suggest… ▽ More As transcranial ultrasound stimulation (TUS) advances as a precise, non-invasive neuromodulatory method, there is a need for consistent reporting standards to enable comparison and reproducibility across studies. To this end, the International Transcranial Ultrasonic Stimulation Safety and Standards Consortium (ITRUSST) formed a subcommittee of experts across several domains to review and suggest standardised reporting parameters for low intensity TUS, resulting in the guide presented here. The scope of the guide is limited to reporting the ultrasound aspects of a study. The guide and supplementary material provide a simple checklist covering the reporting of: (1) the transducer and drive system, (2) the drive system settings, (3) the free field acoustic parameters, (4) the pulse timing parameters, (5) \emph{in situ} estimates of exposure parameters in the brain, and (6) intensity parameters. Detailed explanations for each of the parameters, including discussions on assumptions, measurements, and calculations, are also provided. △ Less

Submitted 15 February, 2024; originally announced February 2024.

Comments: 23 pages, 4 figures, 4 tables, stand alone checklist

Partition function approach to non-Gaussian likelihoods: macrocanonical partitions and replicating Markov-chains

Authors: Maximilian Philipp Herzog, Heinrich von Campe, Rebecca Maria Kuntz, Lennart Röver, Björn Malte Schäfer

Abstract: Monte-Carlo techniques are standard numerical tools for exploring non-Gaussian and multivariate likelihoods. Many variants of the original Metropolis-Hastings algorithm have been proposed to increase the sampling efficiency. Motivated by Ensemble Monte Carlo we allow the number of Markov chains to vary by exchanging particles with a reservoir, controlled by a parameter analogous to a chemical pote… ▽ More Monte-Carlo techniques are standard numerical tools for exploring non-Gaussian and multivariate likelihoods. Many variants of the original Metropolis-Hastings algorithm have been proposed to increase the sampling efficiency. Motivated by Ensemble Monte Carlo we allow the number of Markov chains to vary by exchanging particles with a reservoir, controlled by a parameter analogous to a chemical potential $μ$, which effectively establishes a random process that samples microstates from a macrocanonical instead of a canonical ensemble. In this paper, we develop the theory of macrocanonical sampling for statistical inference on the basis of Bayesian macrocanonical partition functions, thereby bringing to light the relations between information-theoretical quantities and thermodynamic properties. Furthermore, we propose an algorithm for macrocanonical sampling, $\texttt{Avalanche Sampling}$, and apply it to various toy problems as well as the likelihood on the cosmological parameters $Ω_m$ and $w$ on the basis of data from the supernova distance redshift relation. △ Less

Submitted 29 November, 2023; v1 submitted 27 November, 2023; originally announced November 2023.

Comments: 13 pages, 9 figures

ITRUSST Consensus on Biophysical Safety for Transcranial Ultrasonic Stimulation

Authors: Jean-Francois Aubry, David Attali, Mark Schafer, Elsa Fouragnan, Charles Caskey, Robert Chen, Ghazaleh Darmani, Ellen J. Bubrick, Jérôme Sallet, Christopher Butler, Charlotte Stagg, Miriam Klein-Flügge, Seung-Schik Yoo, Brad Treeby, Lennart Verhagen, Kim Butts Pauly

Abstract: Transcranial ultrasonic stimulation (TUS) is an emerging technology for non-invasive brain stimulation. In a series of meetings, the International Consortium for Transcranial Ultrasonic Stimulation Safety and Standards (ITRUSST) has established expert consensus on considerations for the biophysical safety of TUS, drawing upon the relevant diagnostic ultrasound literature and regulations. This repo… ▽ More Transcranial ultrasonic stimulation (TUS) is an emerging technology for non-invasive brain stimulation. In a series of meetings, the International Consortium for Transcranial Ultrasonic Stimulation Safety and Standards (ITRUSST) has established expert consensus on considerations for the biophysical safety of TUS, drawing upon the relevant diagnostic ultrasound literature and regulations. This report reflects a consensus expert opinion and can inform but not replace regulatory guidelines or official international standards. Their establishment by international and national commissions will follow expert consensus. Similarly, this consensus will inform but not replace ethical evaluation, which will consider aspects beyond biophysical safety relevant to burden, risk, and benefit, such as physiological effects and disease-specific interactions. Here, we assume the application of TUS to persons who are not at risk for thermal or mechanical damage, and without ultrasound contrast agents. In this context, we present a concise yet comprehensive set of levels for a nonsignificant risk of TUS application. For mechanical effects, it is safe if the mechanical index (MI) or the mechanical index for transcranial application (MItc) does not exceed 1.9. For thermal effects, it is safe if any of the following three levels are met: a temperature rise less than 2 C, a thermal dose less than 0.25 CEM43, or specific values of the thermal index (TI) for a given exposure time. We review literature relevant to our considerations and discuss limitations and future developments of our approach. △ Less

Submitted 12 July, 2024; v1 submitted 9 November, 2023; originally announced November 2023.

Comments: ITRUSST consensus, 15 pages, 1 table, 1 figure

Towards Standardized Grid Emission Factors: Methodological Insights and Best Practices

Authors: Malte Schäfer, Felipe Cerdas, Christoph Herrmann

Abstract: Inconsistent calculation of grid emission factors (EF) can result in widely divergent corporate greenhouse gas (GHG) emissions reports. We dissect this issue through a comprehensive literature review, identifying nine key aspects - each with two to six methodological choices - that substantially influence the reported EF. These choices lead to relative effect variations ranging from 1.2% to 69%. U… ▽ More Inconsistent calculation of grid emission factors (EF) can result in widely divergent corporate greenhouse gas (GHG) emissions reports. We dissect this issue through a comprehensive literature review, identifying nine key aspects - each with two to six methodological choices - that substantially influence the reported EF. These choices lead to relative effect variations ranging from 1.2% to 69%. Using Germany's 2019-2022 data as a case study, our method yields results that largely align with prior studies, yet reveal relative effects from 0.4% to 34.6%. This study is the first to methodically unpack the key determinants of grid EF, quantify their impacts, and offer clear guidelines for their application in corporate GHG accounting. Our findings hold implications for practitioners, data publishers, researchers, and guideline-making organizations. By openly sharing our data and calculations, we invite replication, scrutiny, and further research. △ Less

Submitted 14 March, 2024; v1 submitted 2 November, 2023; originally announced November 2023.

Comments: 11 pages main paper, 26 pages supplementary information, graphical abstract on the very last page. Code: https://doi.org/10.24355/dbbs.084-202309131139-0, Data: https://doi.org/10.24355/dbbs.084-202309111514-0

Journal ref: RSC Energy & Environmental Science, 2024

Improved action for contact effective field theory

Authors: L. Contessi, M. Schäfer, U. van Kolck

Abstract: We present an improved action for renormalizable effective field theories (EFTs) of systems near the two-body unitarity limit. The ordering of EFT interactions is constrained, but not entirely fixed, by the renormalization group. The remaining freedom can be used to improve the theory's convergence, to simplify its applications, and to connect it to phenomenological models. We exemplify the method… ▽ More We present an improved action for renormalizable effective field theories (EFTs) of systems near the two-body unitarity limit. The ordering of EFT interactions is constrained, but not entirely fixed, by the renormalization group. The remaining freedom can be used to improve the theory's convergence, to simplify its applications, and to connect it to phenomenological models. We exemplify the method on a contact theory applied to systems of up to five $^4$He atoms. We solve the EFT at leading order including a subleading interaction that accounts for part of the two-body effective range. We show that the effects of such fake range can be compensated in perturbation theory at next-to-leading order, as long as the fake range is smaller or comparable to the experimental effective range. These results open the possibility of using similar improved actions for other many-body systems. △ Less

Submitted 16 January, 2024; v1 submitted 24 October, 2023; originally announced October 2023.

Comments: 15 pages, 5 figures

Ground observations of a space laser for the assessment of its in-orbit performance

Authors: The Pierre Auger Collaboration, O. Lux, I. Krisch, O. Reitebuch, D. Huber, D. Wernham, T. Parrinello, :, A. Abdul Halim, P. Abreu, M. Aglietta, I. Allekotte, K. Almeida Cheminant, A. Almela, R. Aloisio, J. Alvarez-Muñiz, J. Ammerman Yebra, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, Anukriti, L. Apollonio, C. Aramo, P. R. Araújo Ferreira , et al. (358 additional authors not shown)

Abstract: The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the… ▽ More The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the course of the mission due to a progressive loss of the atmospheric backscatter signal. The analysis of the root cause was supported by the Pierre Auger Observatory in Argentina whose fluorescence detector registered the ultraviolet laser pulses emitted from the instrument in space, thereby offering an estimation of the laser energy at the exit of the instrument for several days in 2019, 2020 and 2021. The reconstruction of the laser beam not only allowed for an independent assessment of the Aeolus performance, but also helped to improve the accuracy in the determination of the laser beam's ground track on single pulse level. The results presented in this paper set a precedent for the monitoring of space lasers by ground-based telescopes and open new possibilities for the calibration of cosmic-ray observatories. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: 10 pages, 10 figures

Partition function approach to non-Gaussian likelihoods: partitions for the inference of functions and the Fisher-functional

Authors: Rebecca Maria Kuntz, Maximilian Philipp Herzog, Heinrich von Campe, Lennart Röver, Björn Malte Schäfer

Abstract: Motivated by constraints on the dark energy equation of state from supernova-data, we propose a formalism for the Bayesian inference of functions: Starting at a functional variant of the Kullback-Leibler divergence we construct a functional Fisher-matrix and a suitable partition functional which takes on the shape of a path integral. After showing the validity of the Cramér-Rao bound and unbiasedn… ▽ More Motivated by constraints on the dark energy equation of state from supernova-data, we propose a formalism for the Bayesian inference of functions: Starting at a functional variant of the Kullback-Leibler divergence we construct a functional Fisher-matrix and a suitable partition functional which takes on the shape of a path integral. After showing the validity of the Cramér-Rao bound and unbiasedness for functional inference in the Gaussian case, we construct Fisher-functionals for the dark energy equation of state constrained by the cosmological redshift-luminosity relationship of supernovae of type Ia, for both the linearised and the lowest-order non-linear model. Introducing Fourier-expansions and expansions into Gegenbauer-polynomials as discretisations of the dark energy equation of state function shows how the uncertainty on the inferred function scales with model complexity and how functional assumptions can lead to errors in extrapolation to poorly constrained redshift ranges. △ Less

Submitted 23 January, 2024; v1 submitted 29 June, 2023; originally announced June 2023.

Comments: 15 pages, 7 figures

Right here, right now? The role of spatio-temporal minimum renewable shares for energy system transformation pathways

Authors: Tim Fürmann, Ramiz Qussous, Michelle Antretter, Clara Pineau, Rebecca Lovato Franco, Mirko Schäfer

Abstract: Energy system optimization models are important tools to provide insights regarding trade-offs and interrelations in cost-efficient transformation pathways towards a climate neutral energy system. Using an optimization model of the European electricity system, we study the influence of either an emission cap or temporally resolved minimum renewable generation shares as means to power system decarb… ▽ More Energy system optimization models are important tools to provide insights regarding trade-offs and interrelations in cost-efficient transformation pathways towards a climate neutral energy system. Using an optimization model of the European electricity system, we study the influence of either an emission cap or temporally resolved minimum renewable generation shares as means to power system decarbonization. Such minimum shares serve as a stylized representation of novel, more granular procurement or certification schemes for renewable power generation. We observe that decarbonization through minimum shares results in a significant increase in system costs compared to the least cost solution obtained through a direct implementation of the corresponding emission reduction as a cap. Nevertheless, these shares provide direct incentives for expanding renewable generation and storage technologies, thus acting as an additional, potentially more robust decarbonization mechanism. △ Less

Submitted 22 June, 2023; originally announced June 2023.

Cold highly charged ions in a radio-frequency trap with superconducting magnetic shielding

Authors: Elwin A. Dijck, Christian Warnecke, Malte Wehrheim, Ruben B. Henninger, Julia Eff, Kostas Georgiou, Andrea Graf, Stepan Kokh, Lakshmi P. Kozhiparambil Sajith, Christopher Mayo, Vera M. Schäfer, Claudia Volk, Piet O. Schmidt, Thomas Pfeifer, José R. Crespo López-Urrutia

Abstract: We implement sympathetic cooling of highly charged ions (HCI) by fully enclosing a linear Paul trap within a superconducting radio-frequency resonator. A quantization magnetic field applied while cooling down into the superconducting state remains present in the trap for centuries and external electromagnetic fluctuations are greatly suppressed. A magnetic field decay rate at the 10$^{-10}$ s… ▽ More We implement sympathetic cooling of highly charged ions (HCI) by fully enclosing a linear Paul trap within a superconducting radio-frequency resonator. A quantization magnetic field applied while cooling down into the superconducting state remains present in the trap for centuries and external electromagnetic fluctuations are greatly suppressed. A magnetic field decay rate at the 10$^{-10}$ s$^{-1}$ level is found using trapped Doppler-cooled Be$^+$ ions as hyperfine-structure (hfs) qubits. Ramsey interferometry and spin-echo measurements on magnetically-sensitive hfs transitions yield coherence times of >400 ms, showing excellent passive shielding at frequencies down to DC. For sympathetic cooling of HCI, we extract them from an electron beam ion trap (EBIT) and co-crystallize one together with Doppler-cooled Be$^+$ ions. By subsequently ejecting all but one Be$^+$ ions, we prepare single HCI for quantum logic spectroscopy towards frequency metrology and qubit operations with a great variety of HCI species. △ Less

Submitted 2 June, 2023; originally announced June 2023.

Comments: 16 pages, 19 figures. The following article has been submitted to Review of Scientific Instruments. After it is published, it will be found at https://rsi.aip.org/

Journal ref: Rev. Sci. Instrum. 94, 083203 (2023)

Observing dynamical phases of BCS superconductors in a cavity QED simulator

Authors: Dylan J. Young, Anjun Chu, Eric Yilun Song, Diego Barberena, David Wellnitz, Zhijing Niu, Vera M. Schäfer, Robert J. Lewis-Swan, Ana Maria Rey, James K. Thompson

Abstract: In conventional Bardeen-Cooper-Schrieffer (BCS) superconductors, electrons with opposite momenta bind into Cooper pairs due to an attractive interaction mediated by phonons in the material. While superconductivity naturally emerges at thermal equilibrium, it can also emerge out of equilibrium when the system's parameters are abruptly changed. The resulting out-of-equilibrium phases are predicted t… ▽ More In conventional Bardeen-Cooper-Schrieffer (BCS) superconductors, electrons with opposite momenta bind into Cooper pairs due to an attractive interaction mediated by phonons in the material. While superconductivity naturally emerges at thermal equilibrium, it can also emerge out of equilibrium when the system's parameters are abruptly changed. The resulting out-of-equilibrium phases are predicted to occur in real materials and ultracold fermionic atoms but have not yet all been directly observed. Here we realize an alternate way to generate the proposed dynamical phases using cavity quantum electrodynamics (cavity QED). Our system encodes the presence or absence of a Cooper pair in a long-lived electronic transition in $^{88}$Sr atoms coupled to an optical cavity and represents interactions between electrons as photon-mediated interactions through the cavity. To fully explore the phase diagram, we manipulate the ratio between the single-particle dispersion and the interactions after a quench and perform real-time tracking of subsequent dynamics of the superconducting order parameter using non-destructive measurements. We observe regimes where the order parameter decays to zero (phase I), assumes a non-equilibrium steady-state value (phase II), or exhibits persistent oscillations (phase III). This opens up exciting prospects for quantum simulation, including the potential to engineer unconventional superconductors and to probe beyond mean-field effects like the spectral form factor, and for increasing coherence time for quantum sensing. △ Less

Submitted 23 February, 2024; v1 submitted 31 May, 2023; originally announced June 2023.

Comments: Main Text with Supporting Material, 18 pages, 10 figures. The content in this version of the paper is similar to that of the article in Nature

Journal ref: Nature 625, 679-684 (2024)

Partition function approach to non-Gaussian likelihoods: physically motivated convergence criteria for Markov-chains

Authors: Lennart Röver, Heinrich von Campe, Maximilian Philipp Herzog, Rebecca Maria Kuntz, Björn Malte Schäfer

Abstract: Non-Gaussian distributions in cosmology are commonly evaluated with Monte Carlo Markov-chain methods, as the Fisher-matrix formalism is restricted to the Gaussian case. The Metropolis-Hastings algorithm will provide samples from the posterior distribution after a burn-in period, and the corresponding convergence is usually quantified with the Gelman-Rubin criterion. In this paper, we investigate t… ▽ More Non-Gaussian distributions in cosmology are commonly evaluated with Monte Carlo Markov-chain methods, as the Fisher-matrix formalism is restricted to the Gaussian case. The Metropolis-Hastings algorithm will provide samples from the posterior distribution after a burn-in period, and the corresponding convergence is usually quantified with the Gelman-Rubin criterion. In this paper, we investigate the convergence of the Metropolis-Hastings algorithm by drawing analogies to statistical Hamiltonian systems in thermal equilibrium for which a canonical partition sum exists. Specifically, we quantify virialisation, equipartition and thermalisation of Hamiltonian Monte Carlo Markov-chains for a toy-model and for the likelihood evaluation for a simple dark energy model constructed from supernova data. We follow the convergence of these criteria to the values expected in thermal equilibrium, in comparison to the Gelman-Rubin criterion. We find that there is a much larger class of physically motivated convergence criteria with clearly defined target values indicating convergence. As a numerical tool, we employ physics-informed neural networks for speeding up the sampling process. △ Less

Submitted 11 May, 2023; originally announced May 2023.

Comments: 12 pages, 6 figures

Load and generation time series for German federal states: Static vs. dynamic regionalization factors

Authors: Madeleine Sundblad, Tim Fürmann, Anke Weidlich, Mirko Schäfer

Abstract: Electricity generation and demand time series often are only available on a national scale. In this contribution, we derive regionalization factors to allocate publicly available national generation and demand time series for Germany to the federal-state level. We compare two different types of regionalization approaches: Static factors are based on the regional distribution of capacities or popul… ▽ More Electricity generation and demand time series often are only available on a national scale. In this contribution, we derive regionalization factors to allocate publicly available national generation and demand time series for Germany to the federal-state level. We compare two different types of regionalization approaches: Static factors are based on the regional distribution of capacities or population and GPD, whereas dynamic factors take plant-specific generation time series, regionally resolved weather patterns or compositions of different load profiles into account. We observe that dynamic regionalization factors show significant temporal variability, emphasizing the limitations of static regionalization factors for a spatio-temporally more detailed representation of power system time series. △ Less

Submitted 6 April, 2023; originally announced April 2023.

Comments: Data: https://zenodo.org/record/7763278

Journal ref: 2023 Open Source Modelling and Simulation of Energy Systems (OSMSES)

Constructing Exact Confidence Regions on Parameter Manifolds of Non-Linear Models

Authors: Rafael Arutjunjan, Bjoern Malte Schaefer, Clemens Kreutz

Abstract: Using the mathematical framework of information geometry, we introduce a novel method which allows one to efficiently determine the exact shape of simultaneous confidence regions for non-linearly parametrised models. Furthermore, we show how pointwise confidence bands around the model predictions can be constructed from detailed knowledge of the exact confidence region with little additional compu… ▽ More Using the mathematical framework of information geometry, we introduce a novel method which allows one to efficiently determine the exact shape of simultaneous confidence regions for non-linearly parametrised models. Furthermore, we show how pointwise confidence bands around the model predictions can be constructed from detailed knowledge of the exact confidence region with little additional computational effort. We exemplify our methods using inference problems in cosmology and epidemic modelling. An open source implementation of the developed schemes is publicly available via the InformationGeometry.jl package for the Julia programming language. △ Less

Submitted 7 November, 2022; originally announced November 2022.

Comments: 24 pages

Continuous collective strong coupling between atoms and a high finesse optical cavity

Authors: Julia R. K. Cline, Vera M. Schäfer, Zhijing Niu, Dylan J. Young, Tai Hyun Yoon, James K. Thompson

Abstract: We demonstrate continuous loading of strontium atoms into a high finesse ring cavity and observe continuous strong collective coupling in the form of a vacuum Rabi splitting between the atoms and the cavity on the 7.5 kHz transition $^1{\rm S}_0$ to $^3{\rm P}_1$. The atoms are loaded into the cavity from a 3D narrow linewidth molasses, thus avoiding large magnetic field gradients and associated b… ▽ More We demonstrate continuous loading of strontium atoms into a high finesse ring cavity and observe continuous strong collective coupling in the form of a vacuum Rabi splitting between the atoms and the cavity on the 7.5 kHz transition $^1{\rm S}_0$ to $^3{\rm P}_1$. The atoms are loaded into the cavity from a 3D narrow linewidth molasses, thus avoiding large magnetic field gradients and associated broadening of transition frequencies. The ring cavity allows us to realize a deterministic conveyor belt to transport atoms away from the loading region where the laser cooling beams lead to broadening of the strontium clock transition. We trap up to $10^6$ atoms in an intracavity 813 nm lattice in the Lamb-Dicke regime, and transport the atoms along the cavity axis. This work opens the path to the creation of a continuous wave superradiant laser with millihertz linewidth enabling searches for new physics and the use of high-precision optical frequency references outside of low vibration laboratory environments. △ Less

Submitted 31 October, 2022; originally announced November 2022.

Comments: 6 pages, 4 figures

Partition function approach to non-Gaussian likelihoods: Formalism and expansions for weakly non-Gaussian cosmological inference

Authors: Lennart Röver, Lea Carlotta Bartels, Björn Malte Schäfer

Abstract: Non-Gaussian likelihoods, ubiquitous throughout cosmology, are a direct consequence of nonlinearities in the physical model. Their treatment requires Monte-Carlo Markov-chain or more advanced sampling methods for the determination of confidence contours. As an alternative, we construct canonical partition functions as Laplace-transforms of the Bayesian evidence, from which MCMC-methods would sampl… ▽ More Non-Gaussian likelihoods, ubiquitous throughout cosmology, are a direct consequence of nonlinearities in the physical model. Their treatment requires Monte-Carlo Markov-chain or more advanced sampling methods for the determination of confidence contours. As an alternative, we construct canonical partition functions as Laplace-transforms of the Bayesian evidence, from which MCMC-methods would sample microstates. Cumulants of order $n$ of the posterior distribution follow by direct $n$-fold differentiation of the logarithmic partition function, recovering the classic Fisher-matrix formalism at second order. We connect this approach for weakly non-Gaussianities to the DALI- and Gram-Charlier expansions and demonstrate the validity with a supernova-likelihood on the cosmological parameters $Ω_m$ and $w$. We comment on extensions of the canonical partition function to include kinetic energies in order to bridge to Hamilton Monte-Carlo sampling, and on ensemble Markov-chain methods, as they would result from transitioning to macrocanonical partition functions depending on a chemical potential. Lastly we demonstrate the relationship of the partition function approach to the Cramér-Rao boundary and to information entropies. △ Less

Submitted 6 December, 2022; v1 submitted 6 October, 2022; originally announced October 2022.

Comments: 12 pages 2 figures, Affiliation updated

Endeavouring Intelligent Process Self-Control by Employing Digital Twin Methodology: Proof-of-Concept Study for Cooking Applications

Authors: Maximilian Kannapinn, Michael Schäfer

Abstract: This work demonstrates the use of the Digital Twin methodology to predict the water concentration and temperature of chicken meat. It marks a milestone on the path to autonomous cooking devices that do not only control device temperatures but culinary food quality markers as well. A custom water transport equation is coupled to the energy equation. The transport equations are implemented in ANSYS… ▽ More This work demonstrates the use of the Digital Twin methodology to predict the water concentration and temperature of chicken meat. It marks a milestone on the path to autonomous cooking devices that do not only control device temperatures but culinary food quality markers as well. A custom water transport equation is coupled to the energy equation. The transport equations are implemented in ANSYS Fluent 2019R2 via User Defined Function (UDF) code written in C. The model is in good agreement with experiments provided by project partners. Thermal fluid-structure interaction simulations of pan-frying are performed to obtain realistic heat transfer coefficients. They indicate that the coupling of food transport equations to the surrounding heat transfer mechanisms, such as radiation and natural convection, seems promising for future research. Co-simulation of the process is not feasible during operation in the field, so reduced-order models (ROM) are introduced. An evaluation of ROM toolkits on the ANSYS platform reveals that linear time-invariant (LTI) models are unsuitable for cooking applications. In contrast, the recently launched Dynamic ROM Builder predicts the core temperatures with significantly low errors (factor ten below the model and discretization errors of the full-order model). Two examples demonstrate the usage of a Digital Twin controlling the core temperature of chicken fillets. The PI closed-loop control system remains insensitive to errors induced by the Dynamic ROM evaluation. △ Less

Submitted 8 September, 2022; originally announced September 2022.

Comments: Accepted version of the manuscript published in CADFEM ANSYS Simulation Conference 2019. Received a best paper award

Autonomous Cooking with Digital Twin Methodology

Authors: Maximilian Kannapinn, Michael Schäfer

Abstract: This work introduces the concept of an autonomous cooking process based on Digital Twin method- ology. It proposes a hybrid approach of physics-based full order simulations followed by a data-driven system identification process with low errors. It makes faster-than-real-time simulations of Digital Twins feasible on a device level, without the need for cloud or high-performance computing. The conc… ▽ More This work introduces the concept of an autonomous cooking process based on Digital Twin method- ology. It proposes a hybrid approach of physics-based full order simulations followed by a data-driven system identification process with low errors. It makes faster-than-real-time simulations of Digital Twins feasible on a device level, without the need for cloud or high-performance computing. The concept is universally applicable to various physical processes. △ Less

Submitted 7 September, 2022; originally announced September 2022.

Comments: Accepted version of manuscript published in Proceedings of WCCM-ECCOMAS 2020

Physics-based Digital Twins for Autonomous Thermal Food Processing: Efficient, Non-intrusive Reduced-order Modeling

Authors: Maximilian Kannapinn, Minh Khang Pham, Michael Schäfer

Abstract: One possible way of making thermal processing controllable is to gather real-time information on the product's current state. Often, sensory equipment cannot capture all relevant information easily or at all. Digital Twins close this gap with virtual probes in real-time simulations, synchronized with the process. This paper proposes a physics-based, data-driven Digital Twin framework for autonomou… ▽ More One possible way of making thermal processing controllable is to gather real-time information on the product's current state. Often, sensory equipment cannot capture all relevant information easily or at all. Digital Twins close this gap with virtual probes in real-time simulations, synchronized with the process. This paper proposes a physics-based, data-driven Digital Twin framework for autonomous food processing. We suggest a lean Digital Twin concept that is executable at the device level, entailing minimal computational load, data storage, and sensor data requirements. This study focuses on a parsimonious experimental design for training non-intrusive reduced-order models (ROMs) of a thermal process. A correlation ($R=-0.76$) between a high standard deviation of the surface temperatures in the training data and a low root mean square error in ROM testing enables efficient selection of training data. The mean test root mean square error of the best ROM is less than 1 Kelvin (0.2 % mean average percentage error) on representative test sets. Simulation speed-ups of Sp $\approx$ 1.8E4 allow on-device model predictive control. The proposed Digital Twin framework is designed to be applicable within the industry. Typically, non-intrusive reduced-order modeling is required as soon as the modeling of the process is performed in software, where root-level access to the solver is not provided, such as commercial simulation software. The data-driven training of the reduced-order model is achieved with only one data set, as correlations are utilized to predict the training success a priori. △ Less

Submitted 7 September, 2022; originally announced September 2022.

Comments: Accepted version of manuscript published in Innovative Food Science and Emerging Technologies

Emergence of $^4$H $J^π=1^-$ resonance in contact theories

Authors: Lorenzo Contessi, Martin Schäfer, Johannes Kirscher, Rimantas Lazauskas, Jaume Carbonel

Abstract: We obtain the $s$- and $p$-wave low-energy scattering parameters for n$^3$H elastic scattering and the position of the $^4$H $J^π=1^-$ resonance using the pionless effective field theory at leading order. Results are extracted with three numerical techniques: confining the system in a harmonic oscillator trap, solving the Faddeev-Yakubovsky equations in configuration space, and using an effective… ▽ More We obtain the $s$- and $p$-wave low-energy scattering parameters for n$^3$H elastic scattering and the position of the $^4$H $J^π=1^-$ resonance using the pionless effective field theory at leading order. Results are extracted with three numerical techniques: confining the system in a harmonic oscillator trap, solving the Faddeev-Yakubovsky equations in configuration space, and using an effective two-body cluster approach. The renormalization of the theory for the relevant amplitudes is assessed in a cutoff-regulator range between $1\,\text{fm}^{-1}$ and $10\,\text{fm}^{-1}$. Most remarkably, we find a cutoff-stable/RG-invariant resonance in the $^4$H $J^π=1^-$ system. This $p$-wave resonance is a universal consequence of a shallow two-body state and the introduction of a three-body $s$-wave scale set by the triton binding energy. The stabilization of a resonant state in a few-fermion system through pure contact interactions has a significant consequence for the powercounting of the pionless theory. Specifically, it suggests the appearance of similar resonant states also in larger nuclei, like 16-oxygen, in which the theory's leading order does not predict stable states. Those resonances would provide a starting state to be moved to the correct physical position by the perturbative insertion of sub-leading orders, possibly resolving the discrepancy between data and contact EFT. △ Less

Submitted 16 March, 2023; v1 submitted 27 June, 2022; originally announced June 2022.

Comments: 11 pages, 6 figures

Journal ref: Physics Letters B 840, 137840 (2023)

Physical Modeling using Recurrent Neural Networks with Fast Convolutional Layers

Authors: Julian D. Parker, Sebastian J. Schlecht, Rudolf Rabenstein, Maximilian Schäfer

Abstract: Discrete-time modeling of acoustic, mechanical and electrical systems is a prominent topic in the musical signal processing literature. Such models are mostly derived by discretizing a mathematical model, given in terms of ordinary or partial differential equations, using established techniques. Recent work has applied the techniques of machine-learning to construct such models automatically from… ▽ More Discrete-time modeling of acoustic, mechanical and electrical systems is a prominent topic in the musical signal processing literature. Such models are mostly derived by discretizing a mathematical model, given in terms of ordinary or partial differential equations, using established techniques. Recent work has applied the techniques of machine-learning to construct such models automatically from data for the case of systems which have lumped states described by scalar values, such as electrical circuits. In this work, we examine how similar techniques are able to construct models of systems which have spatially distributed rather than lumped states. We describe several novel recurrent neural network structures, and show how they can be thought of as an extension of modal techniques. As a proof of concept, we generate synthetic data for three physical systems and show that the proposed network structures can be trained with this data to reproduce the behavior of these systems. △ Less

Submitted 1 June, 2022; v1 submitted 21 April, 2022; originally announced April 2022.

Comments: Accepted to DAFx2022

Open-data based carbon emission intensity signals for electricity generation in European countries -- top down vs. bottom up approach

Authors: Jan Frederick Unnewehr, Anke Weidlich, Leonhard Gfüllner, Mirko Schäfer

Abstract: Dynamic grid emission factors provide a temporally resolved signal about the carbon intensity of electricity generation in the power system. Since actual carbon dioxide emission measurements are usually lacking, such a signal must be derived from system-specific emission factors combined with power generation time series. We present a bottom-up method that allows deriving per country and per techn… ▽ More Dynamic grid emission factors provide a temporally resolved signal about the carbon intensity of electricity generation in the power system. Since actual carbon dioxide emission measurements are usually lacking, such a signal must be derived from system-specific emission factors combined with power generation time series. We present a bottom-up method that allows deriving per country and per technology emission factors for European countries based on plant specific power generation time series and reported emissions from the European emissions trading mechanism. We have matched, 595 fossil generation units and their respective annual emissions. In 2018, these power plants supplied 717 TWh of electricity to the grid, representing approximately 50 % of power generation from fossil fuels. Based on this dataset, 42 individual technology and country-specific emission factors are derived. The resulting values for historical per country carbon intensity of electricity generation are compared with corresponding results from a top-down approach, which uses statistical data on emissions and power generation on national scales. All calculations are based on publicly available data, such that the analysis is transparent and the method can be replicated, adjusted and expanded in a flexible way. △ Less

Submitted 3 January, 2022; v1 submitted 15 October, 2021; originally announced October 2021.

Influence of an external electric field on the energy dissipation at the initial stage of laser ablation

Authors: S. Hirtle, P. N. Terekhin, M. Schäfer, Y. Kang, S. Ashok, J. A. L'huillier, B. Rethfeld

Abstract: A density-dependent two-temperature model is applied to describe laser excitation and the following relaxation processes of silicon in an external electric field. Two approaches on how to describe the effects of the external electric field are presented. The first approach avoids the buildup of internal electric fields due to charge separation by assuming ambipolar diffusion and adds an additional… ▽ More A density-dependent two-temperature model is applied to describe laser excitation and the following relaxation processes of silicon in an external electric field. Two approaches on how to describe the effects of the external electric field are presented. The first approach avoids the buildup of internal electric fields due to charge separation by assuming ambipolar diffusion and adds an additional carrier-pair current. In the second approach, electrons and holes are treated separately to account for charge separation and the resulting shielding of the external electric field inside the material. The two approaches are compared to experimental results. Both the first approach and the experimental results show similar tendencies for optimization of laser ablation in the external electric field. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Magnetic-field assisted laser ablation of silicon

Authors: M. Schäfer, P. N. Terekhin, Y. Kang, G. Torosyan, X. del Arco Fargas, S. Hirtle, B. Rethfeld, J. A. L'huillier

Abstract: Understanding and manipulation of the laser processing quality during the ablation of solids have crucial importance from fundamental and industrial perspectives. Here we have studied the effect of external magnetic field on the micro-material processing of silicon by ultrashort laser pulses. It was found experimentally that such a field directed along the laser beam improves the quality and effic… ▽ More Understanding and manipulation of the laser processing quality during the ablation of solids have crucial importance from fundamental and industrial perspectives. Here we have studied the effect of external magnetic field on the micro-material processing of silicon by ultrashort laser pulses. It was found experimentally that such a field directed along the laser beam improves the quality and efficiency of the material removal. Additionally, we observe that the formation of laser-induced periodic surface structures (LIPSS) in a multi-pulse regime is affected by the external magnetic field. Our results open a route towards efficient and controllable ultrafast laser micromachining. △ Less

Submitted 1 July, 2021; originally announced July 2021.

Statistical Modeling of Airborne Virus Transmission Through Imperfectly Fitted Face Masks

Authors: Sebastian Lotter, Lukas Brand, Maximilian Schäfer, Robert Schober

Abstract: The rapid emergence and the disastrous impact of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic on public health, societies, and economies around the world has created an urgent need for understanding the pathways critical for virus transmission. Airborne virus transmission by asymptomatic SARS-CoV-2-infected individuals is considered to be a major contributor to the spr… ▽ More The rapid emergence and the disastrous impact of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic on public health, societies, and economies around the world has created an urgent need for understanding the pathways critical for virus transmission. Airborne virus transmission by asymptomatic SARS-CoV-2-infected individuals is considered to be a major contributor to the spread of SARS-CoV-2 and social distancing and wearing of face masks in public have been implemented as countermeasures in many countries. However, a comprehensive risk assessment framework for the airborne transmission of SARS-CoV-2 incorporating realistic assumptions on the filtration of infectious aerosols (IAs) by face masks is not available yet. In particular, in most end-to-end models for airborne virus transmission, it is neglected that the stochastic spread of IAs through imperfectly fitted face masks depends on the dynamics of the breathing of the wearer. In this paper, we consider airborne virus transmission from an infected but asymptomatic person to a healthy person, both wearing imperfectly fitted face masks, in an indoor environment. By framing the end-to-end virus transmission as a Molecular Communications (MC) system, we obtain a statistical description of the number of IAs inhaled by the healthy person subject to the respective configurations of the face masks of both persons. We demonstrate that the exhalation and inhalation air flow dynamics have a significant impact on the stochastic filtering of IAs by the face masks. Furthermore, we show that the fit of the face mask of the infected person can highly impact the infection probability. We conclude that the proposed MC model may contribute a valuable assessment tool to fight the spread of SARS-CoV-2 as it encompasses the randomness of the transmission process and enables comprehensive risk analysis beyond statistical averages. △ Less

Submitted 16 January, 2023; v1 submitted 26 April, 2021; originally announced April 2021.

Comments: 7 pages, 5 figures, 1 table. Presented at the 8th ACM International Conference on Nanoscale Computing and Communication (NANOCOM)

Study of energy response and resolution of the ATLAS Tile Calorimeter to hadrons of energies from 16 to 30 GeV

Authors: Jalal Abdallah, Stylianos Angelidakis, Giorgi Arabidze, Nikolay Atanov, Johannes Bernhard, Romeo Bonnefoy, Jonathan Bossio, Ryan Bouabid, Fernando Carrio, Tomas Davidek, Michal Dubovsky, Luca Fiorini, Francisco Brandan Garcia Aparisi, Tancredi Carli, Alexander Gerbershagen, Hazal Goksu, Haleh Hadavand, Siarhei Harkusha, Dingane Hlaluku, Michael James Hibbard, Kevin Hildebrand, Juansher Jejelava, Andrey Kamenshchikov, Stergios Kazakos, Tomas Kello , et al. (46 additional authors not shown)

Abstract: Three spare modules of the ATLAS Tile Calorimeter were exposed to test beams from the Super Proton Synchrotron accelerator at CERN in 2017. The measurements of the energy response and resolution of the detector to positive pions and kaons and protons with energy in the range 16 to 30 GeV are reported. The results have uncertainties of few percent. They were compared to the predictions of the Geant… ▽ More Three spare modules of the ATLAS Tile Calorimeter were exposed to test beams from the Super Proton Synchrotron accelerator at CERN in 2017. The measurements of the energy response and resolution of the detector to positive pions and kaons and protons with energy in the range 16 to 30 GeV are reported. The results have uncertainties of few percent. They were compared to the predictions of the Geant4-based simulation program used in ATLAS to estimate the response of the detector to proton-proton events at Large Hadron Collider. The determinations obtained using experimental and simulated data agree within the uncertainties. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Calculation of a local COVID-19 reproduction number for the northern Rhineland-Palatinate

Authors: Thomas Götz, Silja Mohrmann, Robert Rockenfeller, Moritz Schäfer, Karunia Putra Wijaya

Abstract: Since the beginning of the corona pandemic in March 2020, various parameters for describing the spread of the disease have been specified for Germany in addition to the daily infection figures (new infections and total infections), which are also used for political decisions. In addition to excess mortality and the weekly incidence, these include the doubling time $T_2$ and the reproduction number… ▽ More Since the beginning of the corona pandemic in March 2020, various parameters for describing the spread of the disease have been specified for Germany in addition to the daily infection figures (new infections and total infections), which are also used for political decisions. In addition to excess mortality and the weekly incidence, these include the doubling time $T_2$ and the reproduction number $R_t$. For the latter, various estimates can be found on the website of the Robert-Koch-Institute, see \cite{EstR:RKI}, which are calculated from the case numbers for all of Germany; local differences are not taken into account here. In the present article, the calculations of the RKI on a local level are examined using the example of northern Rhineland-Palatinate and its districts. Here, not the reporting date but the onset of illness is used as a reference for the calculation of $R_t$. For cases where the onset of illness is not known, an adjusted generalized extreme value distribution (GEV) is first fitted to the data for which the reporting delay (difference between the onset of illness and the reporting date) is available and examined for further characteristics such as local as well as demographic differences. This GEV distribution is then used to calculate the reporting delays of incomplete data points. The calculation of the daily value of $R_t$ between the end of February and the end of October showed a similar course of the reproductive rate compared to the nationwide figures. Expectably larger statistical fluctuations were observed in the summer, mainly due to lower case numbers. The values for northern Rhineland-Palatinate have been consistently above $1$ since about mid-September. The calculations can also be transferred to other regions and administrative districts. △ Less

Submitted 17 November, 2020; originally announced November 2020.

Comments: 16 pages, 23 figures, in German

MSC Class: 92D30; 37N25

Design, upgrade and characterization of the silicon photomultiplier front-end for the AMIGA detector at the Pierre Auger Observatory

Authors: The Pierre Auger Collaboration, A. Aab, P. Abreu, M. Aglietta, J. M. Albury, I. Allekotte, A. Almela, J. Alvarez-Muñiz, R. Alves Batista, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, C. Aramo, P. R. Araújo Ferreira, H. Asorey, P. Assis, G. Avila, A. M. Badescu, A. Bakalova, A. Balaceanu, F. Barbato, R. J. Barreira Luz, K. H. Becker, J. A. Bellido , et al. (335 additional authors not shown)

Abstract: AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to complement the study of ultra-high-energy cosmic rays (UHECR) by measuring the muon content of extensive air showers (EAS). It consists of an array of 61 water Cherenkov detectors on a denser spacing in combination with underground scintillation detectors used for muon density measurement. Each det… ▽ More AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to complement the study of ultra-high-energy cosmic rays (UHECR) by measuring the muon content of extensive air showers (EAS). It consists of an array of 61 water Cherenkov detectors on a denser spacing in combination with underground scintillation detectors used for muon density measurement. Each detector is composed of three scintillation modules, with 10 m$^2$ detection area per module, buried at 2.3 m depth, resulting in a total detection area of 30 m$^2$. Silicon photomultiplier sensors (SiPM) measure the amount of scintillation light generated by charged particles traversing the modules. In this paper, the design of the front-end electronics to process the signals of those SiPMs and test results from the laboratory and from the Pierre Auger Observatory are described. Compared to our previous prototype, the new electronics shows a higher performance, higher efficiency and lower power consumption, and it has a new acquisition system with increased dynamic range that allows measurements closer to the shower core. The new acquisition system is based on the measurement of the total charge signal that the muonic component of the cosmic ray shower generates in the detector. △ Less

Submitted 25 January, 2021; v1 submitted 12 November, 2020; originally announced November 2020.

Comments: 40 pages, 33 figures

Report number: FERMILAB-PUB-20-605-AD-E-TD

Journal ref: JINST 16 (2021) P01026

Numerical simulation of non-isothermal viscoelastic flows at high Weissenberg numbers using a finite volume method on general unstructured meshes

Authors: Stefanie Meburger, Matthias Niethammer, Dieter Bothe, Michael Schäfer

Abstract: In this numerical study, an original approach to simulate non-isothermal viscoelastic fluid flows at high Weissenberg numbers is presented. Stable computations over a wide range of Weissenberg numbers are assured by using the root conformation approach in a finite volume framework on general unstructured meshes. The numerical stabilization framework is extended to consider thermo-rheological prope… ▽ More In this numerical study, an original approach to simulate non-isothermal viscoelastic fluid flows at high Weissenberg numbers is presented. Stable computations over a wide range of Weissenberg numbers are assured by using the root conformation approach in a finite volume framework on general unstructured meshes. The numerical stabilization framework is extended to consider thermo-rheological properties in Oldroyd-B type viscoelastic fluids. The temperature dependence of the viscoelastic fluid is modeled with the time-temperature superposition principle. Both Arrhenius and WLF shift factors can be chosen, depending on the flow characteristics. The internal energy balance takes into account both energy and entropy elasticity. Partitioning is achieved by a constant split factor. An analytical solution of the balance equations in planar channel flow is derived to verify the results of the main field variables and to estimate the numerical error. The more complex entry flow of a polyisobutylene-based polymer solution in an axisymmetric 4:1 contraction is studied and compared to experimental data from the literature. We demonstrate the stability of the method in the experimentally relevant range of high Weissenberg numbers. The results at different imposed wall temperatures, as well as Weissenberg numbers, are found to be in good agreement with experimental data. Furthermore, the division between energy and entropy elasticity is investigated in detail with regard to the experimental setup. △ Less

Submitted 5 December, 2020; v1 submitted 5 August, 2020; originally announced August 2020.

Comments: 25 pages, 13 figures, 2 tables

Journal ref: J. Non-Newton. Fluid Mech. 287 (2020), 104451

Tracing carbon dioxide emissions in the European electricity markets

Authors: Mirko Schäfer, Bo Tranberg, Dave Jones, Anke Weidlich

Abstract: Consumption-based carbon emission measures aim to account for emissions associated with power transmission from distant regions, as opposed to measures which only consider local power generation. Outlining key differences between two different methodological variants of this approach, we report results on consumption-based emission intensities of power generation for European countries from 2016 t… ▽ More Consumption-based carbon emission measures aim to account for emissions associated with power transmission from distant regions, as opposed to measures which only consider local power generation. Outlining key differences between two different methodological variants of this approach, we report results on consumption-based emission intensities of power generation for European countries from 2016 to 2019. We find that in particular for well connected smaller countries, the consideration of imports has a significant impact on the attributed emissions. For these countries, implicit methodological choices in the input-output model are reflected in both hourly and average yearly emission measures. △ Less

Submitted 3 August, 2020; originally announced August 2020.

Comments: Accepted conference proceedings paper for the EEM 2020

Transfer Function Models for Cylindrical MC Channels with Diffusion and Laminar Flow

Authors: Maximilian Schäfer, Wayan Wicke, Lukas Brand, Rudolf Rabenstein, Robert Schober

Abstract: The analysis and design of advection-diffusion based molecular communication (MC) systems in cylindrical environments is of particular interest for applications such as micro-fluidics and targeted drug delivery in blood vessels. Therefore, the accurate modeling of the corresponding MC channel is of high importance. The propagation of particles in these systems is caused by a combination of diffusi… ▽ More The analysis and design of advection-diffusion based molecular communication (MC) systems in cylindrical environments is of particular interest for applications such as micro-fluidics and targeted drug delivery in blood vessels. Therefore, the accurate modeling of the corresponding MC channel is of high importance. The propagation of particles in these systems is caused by a combination of diffusion and flow with a parabolic velocity profile, i.e., laminar flow. The propagation characteristics of the particles can be categorized into three different regimes: The flow dominant regime where the influence of diffusion on the particle transport is negligible, the dispersive regime where diffusion has a much stronger impact than flow, and the mixed regime where both effects are important. For the limiting regimes, i.e., the flow dominant and dispersive regimes, there are well-known solutions and approximations for particle transport. In contrast, there is no general analytical solution for the mixed regime, and instead, approximations, numerical techniques, and particle based simulations have been employed. In this paper, we develop a general model for the advection-diffusion problem in cylindrical environments which provides an analytical solution applicable in all regimes. The modeling procedure is based on a transfer function approach and the main focus lies on the incorporation of laminar flow into the analytical model. The properties of the proposed model are analyzed by numerical evaluation for different scenarios including the uniform and point release of particles. We provide a comparison with particle based simulations and the well-known solutions for the limiting regimes to demonstrate the validity of the proposed analytical model. △ Less

Submitted 3 July, 2020; originally announced July 2020.

Comments: 30 pages, 8 figures, 3 tables, Submitted for possible journal publication in IEEE Transactions on Molecular, Biological, and Multi-Scale Communications

Limits from the Funk Experiment on the Mixing Strength of Hidden-Photon Dark Matter in the Visible and Near-Ultraviolet Wavelength Range

Authors: A. Andrianavalomahefa, C. M. Schäfer, D. Veberič, R. Engel, T. Schwetz, H. -J. Mathes, K. Daumiller, M. Roth, D. Schmidt, R. Ulrich, B. Döbrich, J. Jaeckel, M. Kowalski, A. Lindner, J. Redondo

Abstract: We present results from the FUNK experiment in the search for hidden-photon dark matter. Near the surface of a mirror, hidden photons may be converted into ordinary photons. These photons are emitted perpendicular to the surface and have an energy equal to the mass of the dark matter hidden photon. Our experimental setup consists of a large, spherical mirror with an area of more than 14 m$^2$, whi… ▽ More We present results from the FUNK experiment in the search for hidden-photon dark matter. Near the surface of a mirror, hidden photons may be converted into ordinary photons. These photons are emitted perpendicular to the surface and have an energy equal to the mass of the dark matter hidden photon. Our experimental setup consists of a large, spherical mirror with an area of more than 14 m$^2$, which concentrates the emitted photons into its central point. Using a detector sensitive to visible and near-UV photons, we can exclude a kinetic-mixing coupling of stronger than $χ\approx 10^{-12}$ in the mass range of 2.5 to 7 eV, assuming hidden photons comprise all of the dark matter. The experimental setup and analysis used to obtain this limit are discussed in detail. △ Less

Submitted 23 June, 2020; v1 submitted 29 March, 2020; originally announced March 2020.

Comments: 16 pages, 24 figures

Journal ref: Phys. Rev. D 102, 042001 (2020)

Multi-fermion systems with contact theories

Authors: Martin Schäfer, Lorenzo Contessi, Johannes Kirscher, Jiří Mareš

Abstract: We address the question of minimal requirements for the existence of quantum bound states. In particular, we demonstrate that a few-body system with zero-range momentum-independent two-body interactions is unstable against decay into clusters, if mixed-symmetry of its wave function is enforced. We claim that any theory in which the two-body scattering length is much larger than any other scale i… ▽ More We address the question of minimal requirements for the existence of quantum bound states. In particular, we demonstrate that a few-body system with zero-range momentum-independent two-body interactions is unstable against decay into clusters, if mixed-symmetry of its wave function is enforced. We claim that any theory in which the two-body scattering length is much larger than any other scale involved exhibits such instability. We exemplify this with the inability of the leading-order pionless effective field theory to describe stable states of $A>4$ nuclei. A finite interaction range is identified as a sufficient condition for a bound mixed-symmetry system. The minimal value of this range depends on the proximity of a system to unitarity, on the number of constituents, and on the particular realization of discrete scale invariance of the three-body spectrum. △ Less

Submitted 15 March, 2021; v1 submitted 22 March, 2020; originally announced March 2020.

Comments: 15 pages, 3 figures

Principal Cross-Border Flow Patterns in the European Electricity Markets

Authors: Mirko Schäfer, Fabian Hofmann, Hazem Abdel-Khalek, Anke Weidlich

Abstract: The interconnected European Electricity Markets see considerable cross-border trade between different countries. In conjunction with the structure and technical characteristics of the power grid and its operating rules, the corresponding commercial flows translate into actual physical flows on the interconnection lines. From the interplay of different physical, technical, and economic factors thus… ▽ More The interconnected European Electricity Markets see considerable cross-border trade between different countries. In conjunction with the structure and technical characteristics of the power grid and its operating rules, the corresponding commercial flows translate into actual physical flows on the interconnection lines. From the interplay of different physical, technical, and economic factors thus emerge complex spatiotemporal power flow patterns. Using Principal Component Analysis, in this contribution hourly time-series of cross-border physical flows between European countries in 2017 and 2018 are analyzed. The most important patterns in the time series of imports/exports and cross-border physical flows are identified. Their spatial and temporal structure, as well as their contribution to the overall variance is described. Additionally, we apply a tracing technique to the overall flow patterns, which allows identifying the physical power transfers between European countries through the common grid infrastructure. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Comments: Accepted conference proceedings paper for the EEM 2019

Magnetic field stabilization system for atomic physics experiments

Authors: B. Merkel, K. Thirumalai, J. E. Tarlton, V. M. Schäfer, C. J. Ballance, T. P. Harty, D. M. Lucas

Abstract: Atomic physics experiments commonly use millitesla-scale magnetic fields to provide a quantization axis. As atomic transition frequencies depend on the amplitude of this field, many experiments require a stable absolute field. Most setups use electromagnets, which require a power supply stability not usually met by commercially available units. We demonstrate stabilization of a field of 14.6 mT to… ▽ More Atomic physics experiments commonly use millitesla-scale magnetic fields to provide a quantization axis. As atomic transition frequencies depend on the amplitude of this field, many experiments require a stable absolute field. Most setups use electromagnets, which require a power supply stability not usually met by commercially available units. We demonstrate stabilization of a field of 14.6 mT to 4.3 nT rms noise (0.29 ppm), compared to noise of $\gtrsim$ 100 nT without any stabilization. The rms noise is measured using a field-dependent hyperfine transition in a single $^{43}$Ca$^+$ ion held in a Paul trap at the centre of the magnetic field coils. For the $^{43}$Ca$^+$ "atomic clock" qubit transition at 14.6 mT, which depends on the field only in second order, this would yield a projected coherence time of many hours. Our system consists of a feedback loop and a feedforward circuit that control the current through the field coils and could easily be adapted to other field amplitudes, making it suitable for other applications such as neutral atom traps. △ Less

Submitted 18 April, 2019; v1 submitted 9 August, 2018; originally announced August 2018.

Comments: 6 pages, 5 figures

Journal ref: Review of Scientific Instruments 90, 044702 (2019)

Principal Flow Patterns across renewable electricity networks

Authors: Fabian Hofmann, Mirko Schäfer, Tom Brown, Jonas Hörsch, Stefan Schramm, Martin Greiner

Abstract: Using Principal Component Analysis (PCA), the nodal injection and line flow patterns in a network model of a future highly renewable European electricity system are investigated. It is shown that the number of principal components needed to describe 95$\%$ of the nodal power injection variance first increases with the spatial resolution of the system representation. The number of relevant componen… ▽ More Using Principal Component Analysis (PCA), the nodal injection and line flow patterns in a network model of a future highly renewable European electricity system are investigated. It is shown that the number of principal components needed to describe 95$\%$ of the nodal power injection variance first increases with the spatial resolution of the system representation. The number of relevant components then saturates at around 76 components for network sizes larger than 512 nodes, which can be related to the correlation length of wind patterns over Europe. Remarkably, the application of PCA to the transmission line power flow statistics shows that irrespective of the spatial scale of the system representation a very low number of only 8 principal flow patterns is sufficient to capture 95$\%$ of the corresponding spatio-temporal variance. This result can be theoretically explained by a particular alignment of some principal injection patterns with topological patterns inherent to the network structure of the European transmission system. △ Less

Submitted 8 October, 2018; v1 submitted 20 July, 2018; originally announced July 2018.

Flow-based analysis of storage usage in a low-carbon European electricity scenario

Authors: Bo Tranberg, Mirko Schäfer, Tom Brown, Jonas Hörsch, Martin Greiner

Abstract: The application of the flow tracing method to power flows in and out of storage units allows to analyse the usage of this technology option in large-scale interconnected electricity systems. We apply this method to a data-driven model of the European electricity network, which uses a techno-economic optimisation to determine generation and storage capacities and dispatch, assuming a 95% reduction… ▽ More The application of the flow tracing method to power flows in and out of storage units allows to analyse the usage of this technology option in large-scale interconnected electricity systems. We apply this method to a data-driven model of the European electricity network, which uses a techno-economic optimisation to determine generation and storage capacities and dispatch, assuming a 95% reduction of CO2 emission compared to 1990 levels. A flow-based analysis of the power inflow into the different storage technologies confirms the intuition that longer-term hydrogen storage is mainly utilised for wind, whereas short-term battery storage mostly receives inflow from solar power generation. The usage of storage technologies in general shows a local-but-global behaviour: Whereas on average the power outflow from these capacities is predominantly consumed locally inside the same node, when exported it is also transmitted over long distances as a global flexibility option for the entire system. △ Less

Submitted 7 June, 2018; originally announced June 2018.

Comments: 15th International Conference on the European Energy Market - EEM 2018

Analytical Models for Particle Diffusion and Flow in a Horizontal Cylinder with a Vertical Force

Authors: Maximilian Schäfer, Wayan Wicke, Rudolf Rabenstein, Robert Schober

Abstract: This paper considers particle propagation in a cylindrical molecular communication channel, e.g. a simplified model of a blood vessel. Emitted particles are influenced by diffusion, flow, and a vertical force induced e.g. by gravity or magnetism. The dynamics of the diffusion process are modeled by multi-dimensional transfer functions in a spatio-temporal frequency domain. Realistic boundary condi… ▽ More This paper considers particle propagation in a cylindrical molecular communication channel, e.g. a simplified model of a blood vessel. Emitted particles are influenced by diffusion, flow, and a vertical force induced e.g. by gravity or magnetism. The dynamics of the diffusion process are modeled by multi-dimensional transfer functions in a spatio-temporal frequency domain. Realistic boundary conditions are incorporated by the design of a feedback loop. The result is a discrete-time semi-analytical model for the particle concentration in the channel. The model is validated by comparison to particle-based simulations. These numerical experiments reveal that the particle concentration of the proposed semi-analytical model and the particle-based model are in excellent agreement. The analytical form of the proposed solution provides several benefits over purely numerical models, e.g. high flexibility, existence of low run-time algorithms, extendability to several kinds of boundary conditions, and analytical connection to parameters from communication theory. △ Less

Submitted 23 February, 2019; v1 submitted 28 March, 2018; originally announced March 2018.

Comments: 7 pages, 4 figures, 1 table, Accepted for publication at IEEE International Conference on Communications (ICC 2019)

Cost optimal scenarios of a future highly renewable European electricity system: Exploring the influence of weather data, cost parameters and policy constraints

Authors: David P. Schlachtberger, Tom Brown, Mirko Schäfer, Stefan Schramm, Martin Greiner

Abstract: Cost optimal scenarios derived from models of a highly renewable electricity system depend on the specific input data, cost assumptions and system constraints. Here this influence is studied using a techno-economic optimisation model for a networked system of 30 European countries, taking into account the capacity investment and operation of wind, solar, hydroelectricity, natural gas power generat… ▽ More Cost optimal scenarios derived from models of a highly renewable electricity system depend on the specific input data, cost assumptions and system constraints. Here this influence is studied using a techno-economic optimisation model for a networked system of 30 European countries, taking into account the capacity investment and operation of wind, solar, hydroelectricity, natural gas power generation, transmission, and different storage options. A considerable robustness of total system costs to the input weather data and to moderate changes in the cost assumptions is observed. Flat directions in the optimisation landscape around cost-optimal configurations often allow system planners to choose between different technology options without a significant increase in total costs, for instance by replacing onshore with offshore wind power capacity in case of public acceptance issues. Exploring a range of carbon dioxide emission limits shows that for scenarios with moderate transmission expansion, a reduction of around 57% compared to 1990 levels is already cost optimal. For stricter carbon dioxide limits, power generated from gas turbines is at first replaced by generation from increasing renewable capacities. Non-hydro storage capacities are only built for low-emission scenarios, in order to provide the necessary flexibility to meet peaks in the residual load. △ Less

Submitted 18 August, 2018; v1 submitted 26 March, 2018; originally announced March 2018.

Comments: 18 pages, 23 figures, 2 tables, accepted to Energy

Flow-based nodal cost allocation in a heterogeneous highly renewable European electricity network

Authors: Bo Tranberg, Leon J. Schwenk-Nebbe, Mirko Schäfer, Jonas Hörsch, Martin Greiner

Abstract: For a cost efficient design of a future renewable European electricity system, the placement of renewable generation capacity will seek to exploit locations with good resource quality, that is for instance onshore wind in countries bordering the North Sea and solar PV in South European countries. Regions with less favorable renewable generation conditions benefit from this remote capacity by impor… ▽ More For a cost efficient design of a future renewable European electricity system, the placement of renewable generation capacity will seek to exploit locations with good resource quality, that is for instance onshore wind in countries bordering the North Sea and solar PV in South European countries. Regions with less favorable renewable generation conditions benefit from this remote capacity by importing the respective electricity as power flows through the transmission grid. The resulting intricate pattern of imports and exports represents a challenge for the analysis of system costs on the level of individual countries. Using a tracing technique, we introduce flow-based nodal levelized costs of electricity (LCOE) which allow to incorporate capital and operational costs associated with the usage of generation capacity located outside the respective country under consideration. This concept and a complementary allocation of transmission infrastructure costs is applied to a simplified model of an interconnected highly renewable European electricity system. We observe that cooperation between the European countries in a heterogeneous system layout does not only reduce the system-wide LCOE, but also the flow-based nodal LCOEs for every country individually. △ Less

Submitted 20 February, 2018; v1 submitted 31 January, 2018; originally announced January 2018.

Comments: 23 pages, 7 figures, 2 tables

Search for hidden-photon dark matter with the FUNK experiment

Authors: FUNK Experiment, :, D. Veberič, A. Andrianavalomahefa, K. Daumiller, B. Döbrich, R. Engel, J. Jaeckel, M. Kowalski, A. Lindner, H. -J. Mathes, J. Redondo, M. Roth, T. Schwetz-Mangold, C. M. Schäfer, R. Ulrich

Abstract: Many extensions of the Standard Model of particle physics predict a parallel sector of a new U(1) symmetry, giving rise to hidden photons. These hidden photons are candidate particles for cold dark matter. They are expected to kinetically mix with regular photons, which leads to a tiny oscillating electric-field component accompanying dark matter particles. A conducting surface can convert such da… ▽ More Many extensions of the Standard Model of particle physics predict a parallel sector of a new U(1) symmetry, giving rise to hidden photons. These hidden photons are candidate particles for cold dark matter. They are expected to kinetically mix with regular photons, which leads to a tiny oscillating electric-field component accompanying dark matter particles. A conducting surface can convert such dark matter particles into photons which are emitted almost perpendicularly to the surface. The corresponding photon frequency follows from the mass of the hidden photons. In this contribution we present a preliminary result on a hidden photon search in the visible and near-UV wavelength range that was done with a large, 14 m2 spherical metallic mirror and discuss future dark matter searches in the eV and sub-eV range by application of different detectors for electromagnetic radiation. △ Less

Submitted 1 November, 2017; originally announced November 2017.

Comments: Contribution to the 35th International Cosmic Ray Conference ICRC2017, 10 to 20 July, 2017, Bexco, Busan, Korea. arXiv admin note: text overlap with arXiv:1711.02961

Scaling of transmission capacities in coarse-grained renewable electricity networks

Authors: Mirko Schäfer, Simon Bugge Siggaard, Kun Zhu, Chris Risager Poulsen, Martin Greiner

Abstract: Network models of large-scale electricity systems feature only a limited spatial resolution, either due to lack of data or in order to reduce the complexity of the problem with respect to numerical calculations. In such cases, both the network topology, the load and the generation patterns below a given spatial scale are aggregated into representative nodes. This coarse-graining affects power flow… ▽ More Network models of large-scale electricity systems feature only a limited spatial resolution, either due to lack of data or in order to reduce the complexity of the problem with respect to numerical calculations. In such cases, both the network topology, the load and the generation patterns below a given spatial scale are aggregated into representative nodes. This coarse-graining affects power flows and thus the resulting transmission needs of the system. We derive analytical scaling laws for measures of network transmission capacity and cost in coarse-grained renewable electricity networks. For the cost measure only a very weak scaling with the spatial resolution of the system is found. The analytical results are shown to describe the scaling of the transmission infrastructure measures for a simplified, but data-driven and spatially detailed model of the European electricity system with a high share of fluctuating renewable generation. △ Less

Submitted 21 September, 2017; originally announced September 2017.

Comments: to be published in EPL

Fast quantum logic gates with trapped-ion qubits

Authors: V. M. Schäfer, C. J. Ballance, K. Thirumalai, L. J. Stephenson, T. G. Ballance, A. M. Steane, D. M. Lucas

Abstract: Quantum bits based on individual trapped atomic ions constitute a promising technology for building a quantum computer, with all the elementary operations having been achieved with the necessary precision for some error-correction schemes. However, the essential two-qubit logic gate used for generating quantum entanglement has hitherto always been performed in an adiabatic regime, where the gate i… ▽ More Quantum bits based on individual trapped atomic ions constitute a promising technology for building a quantum computer, with all the elementary operations having been achieved with the necessary precision for some error-correction schemes. However, the essential two-qubit logic gate used for generating quantum entanglement has hitherto always been performed in an adiabatic regime, where the gate is slow compared with the characteristic motional frequencies of ions in the trap, giving logic speeds of order 10kHz. There have been numerous proposals for performing gates faster than this natural "speed limit" of the trap. We implement the method of Steane et al., which uses tailored laser pulses: these are shaped on 10 ns timescales to drive the ions' motion along trajectories designed such that the gate operation is insensitive to optical phase fluctuations. This permits fast (MHz-rate) quantum logic which is robust to this important source of experimental error. We demonstrate entanglement generation for gate times as short as 480ns; this is less than a single oscillation period of an ion in the trap, and 8 orders of magnitude shorter than the memory coherence time measured in similar calcium-43 hyperfine qubits. The method's power is most evident at intermediate timescales, where it yields a gate error more than ten times lower than conventional techniques; for example, we achieve a 1.6 us gate with fidelity 99.8%. Still faster gates are possible at the price of higher laser intensity. The method requires only a single amplitude-shaped pulse and one pair of beams derived from a continuous-wave laser, and offers the prospect of combining the unrivalled coherence properties, operation fidelities and optical connectivity of trapped-ion qubits with the sub-microsecond logic speeds usually associated with solid state devices. △ Less

Submitted 14 January, 2019; v1 submitted 20 September, 2017; originally announced September 2017.

Comments: author submitted version

Journal ref: Nature 555, 75-78 (2018)

The role of cosmology in modern physics

Authors: Bjoern Malte Schaefer

Abstract: Subject of this article is the relationship between modern cosmology and fundamental physics, in particular general relativity as a theory of gravity on one side, together with its unique application in cosmology, and the formation of structures and their statistics on the other. It summarises arguments for the formulation for a metric theory of gravity and the uniqueness of the construction of ge… ▽ More Subject of this article is the relationship between modern cosmology and fundamental physics, in particular general relativity as a theory of gravity on one side, together with its unique application in cosmology, and the formation of structures and their statistics on the other. It summarises arguments for the formulation for a metric theory of gravity and the uniqueness of the construction of general relativity. It discusses symmetry arguments in the construction of Friedmann-Lemaître cosmologies as well as assumptions in relation to the presence of dark matter, when adopting general relativity as the gravitational theory. A large section is dedicated to $Λ$CDM as the standard model for structure formation and the arguments that led to its construction, and to the of role statistics and to the problem of scientific inference in cosmology as an empirical science. The article concludes with an outlook on current and future developments in cosmology. △ Less

Submitted 16 January, 2017; originally announced January 2017.

Comments: 9 pages, invited contribution to the workshop "Why trust a theory?", Dec.2015 in Munich

Flow tracing as a tool set for the analysis of networked large-scale renewable electricity systems

Authors: Jonas Hörsch, Mirko Schäfer, Sarah Becker, Stefan Schramm, Martin Greiner

Abstract: The method of flow tracing follows the power flow from net-generating sources through the network to the net-consuming sinks, which allows to assign the usage of the underlying transmission infrastructure to the system participants. This article presents a reformulation that is applicable to arbitrary compositions of inflow appearing naturally in models of large-scale electricity systems with a hi… ▽ More The method of flow tracing follows the power flow from net-generating sources through the network to the net-consuming sinks, which allows to assign the usage of the underlying transmission infrastructure to the system participants. This article presents a reformulation that is applicable to arbitrary compositions of inflow appearing naturally in models of large-scale electricity systems with a high share of renewable power generation. We propose an application which allows to associate power flows on the grid to specific regions or generation technologies, and emphasizes the capability of this technique to disentangle the spatio-temporal patterns of physical imports and exports occurring in such systems. The analytical potential of this method is showcased for a scenario based on the IEEE 118 bus network. △ Less

Submitted 26 August, 2017; v1 submitted 9 September, 2016; originally announced September 2016.

Comments: 20 pages, 7 figures, 2 tables; version 2 includes revised introduction, methodology and conclusion sections

Journal ref: Int. J. Electr. Power Energy Syst. 96 (2018) 390-397

Search for dark matter in the hidden-photon sector with a large spherical mirror

Authors: The FUNK Experiment, :, Darko Veberič, Kai Daumiller, Babette Döbrich, Ralph Engel, Joerg Jaeckel, Marek Kowalski, Axel Lindner, Hermann-Josef Mathes, Javier Redondo, Markus Roth, Christoph M. Schäfer, Ralf Ulrich

Abstract: If dark matter consists of hidden-sector photons which kinetically mix with regular photons, a tiny oscillating electric-field component is present wherever we have dark matter. In the surface of conducting materials this induces a small probability to emit single photons almost perpendicular to the surface, with the corresponding photon frequency matching the mass of the hidden photons. We report… ▽ More If dark matter consists of hidden-sector photons which kinetically mix with regular photons, a tiny oscillating electric-field component is present wherever we have dark matter. In the surface of conducting materials this induces a small probability to emit single photons almost perpendicular to the surface, with the corresponding photon frequency matching the mass of the hidden photons. We report on a construction of an experimental setup with a large ~14 m2 spherical metallic mirror that will allow for searches of hidden-photon dark matter in the eV and sub-eV range by application of different electromagnetic radiation detectors. We discuss sensitivity and accessible regions in the dark matter parameter space. △ Less

Submitted 9 September, 2015; v1 submitted 8 September, 2015; originally announced September 2015.

Comments: 9 pages, proceeding of the 34th International Cosmic Ray Conference (ICRC), July 30 - August 6, 2015, The Hague, The Netherlands

Journal ref: PoS(ICRC2015)1191