-
Photohermal Microswimmer Penetrate Cell Membrane with Cavitation Bubble
Authors:
Binglin Zeng,
Jialin Lai,
Jingyuan Chen,
Yaxin Huang,
Changjin Wu,
Chao Huang,
Qingxin Guo,
Xiaofeng Li,
Shuai Li,
Jinyao Tang
Abstract:
Self-propelled micromotors can efficiently convert ambient energy into mechanical motion, which is of great interest for its potential biomedical applications in delivering therapeutics noninvasively. However, navigating these micromotors through biological barriers remains a significant challenge as most micromotors do not provide sufficient disruption forces in in-vivo conditions. In this study,…
▽ More
Self-propelled micromotors can efficiently convert ambient energy into mechanical motion, which is of great interest for its potential biomedical applications in delivering therapeutics noninvasively. However, navigating these micromotors through biological barriers remains a significant challenge as most micromotors do not provide sufficient disruption forces in in-vivo conditions. In this study, we employed focused scanning laser from conventional confocal microscope to manipulate carbon microbottle based microswimmers. With the increasing of the laser power, the microswimmers' motions translates from autonomous to directional, and finally the high power laser induced the microswimmer explosions, which effectively deliveres microbottle fragments through the cell membrane. It is revealed that photothermally-induced cavitation bubbles enable the propulsion of microbottles in liquids, where the motion direction can be precisely regulated by the scanning orientation of the laser. Furthermore, the membrane penetration ability of the microbottles promised potential applications in drug delivery and cellular injections. As microbottles navigate toward cells, we strategically increase the laser power to trigger their explosion. By loading microswimmers with transfection genes, cytoplasmic transfection can be realized, which is demonstrated by successful gene transfection of GPF in cells. Our findings open new possibilities for cell injection and gene transfection using micromotors.
△ Less
Submitted 18 June, 2024; v1 submitted 18 June, 2024;
originally announced June 2024.
-
A broadband pulse amplifier for Joule heating experiments in diamond anvil cells
Authors:
Zachary M. Geballe,
Joseph Lai,
Michael J. Walter
Abstract:
Decades of measurements of the thermophysical properties of hot metals show that pulsed Joule heating is an effective method to heat solid and liquid metals that are chemically reactive or difficult to contain. In order to extend such measurements to megabar pressures, pulsed heating methods must be integrated with diamond anvil cells. We report the design and characterization of a new pulse ampli…
▽ More
Decades of measurements of the thermophysical properties of hot metals show that pulsed Joule heating is an effective method to heat solid and liquid metals that are chemically reactive or difficult to contain. In order to extend such measurements to megabar pressures, pulsed heating methods must be integrated with diamond anvil cells. We report the design and characterization of a new pulse amplifier that can heat $\sim 5$ to $50$ $μ$m-diameter metal wires to 1000s of kelvin at megabar pressures using diamond anvil cells. Pulse durations and peak currents can each be varied over 3 orders of magnitude, from 5 $μ$s to 10 ms and 0.2 to 200 A. The pulse amplifier is integrated with a current probe. Two voltage probes attached to the body of a diamond anvil cell can be used to measure voltage in a four point probe geometry. The accuracy of four point probe resistance measurements for a dummy sample with 0.1 $Ω$ resistance are typically better than $5 \%$ at all times from 2 $μ$s to 10 ms after the beginning of the pulse.
△ Less
Submitted 30 October, 2023; v1 submitted 23 October, 2023;
originally announced October 2023.
-
Local laser heating effects in diamond probed by photoluminescence of SiV centers at low temperature
Authors:
YuanFei Gao,
JiaMin Lai,
ZhenYao Li,
PingHeng Tan,
ChongXin Shan,
Jun Zhang
Abstract:
Diamond is generally considered to have high thermal conductivity, so little attention has been paid to the laser heating effects at low excitation power. However, defects during the growth process can result in a great degradation of thermal conductivity, especially at low temperatures. Here, we observed the dynamic redshift and broadening of zero phonon line (ZPL) of silicon-vacancy (SiV) center…
▽ More
Diamond is generally considered to have high thermal conductivity, so little attention has been paid to the laser heating effects at low excitation power. However, defects during the growth process can result in a great degradation of thermal conductivity, especially at low temperatures. Here, we observed the dynamic redshift and broadening of zero phonon line (ZPL) of silicon-vacancy (SiV) centers in diamondin the experiment. Utilizing the intrinsic temperature response of the fine structure spectra of SiV as a probe, we confirmed that the laser heating effect appears and the temperature rising results from high defect concentration. By simulating the thermal diffusion process, we have estimated the thermal conductivity of around 1 W/(mK) at the local site, which is a two order magnitude lower than that of single-crystal diamond. Our results provide a feasible scheme for characterizing the laser heating effect of diamond at low temperatures.
△ Less
Submitted 12 June, 2023;
originally announced June 2023.
-
XPS analysis of molecular contamination and sp2 amorphous carbon on oxidized (100) diamond
Authors:
Ricardo Vidrio,
Daniel Vincent,
Benjamin Bachman,
Cesar Saucedo,
Maryam Zahedian,
Zihong Xu,
Junyu Lai,
Timothy A. Grotjohn,
Shimon Kolkowitz,
Jung-Hun Seo,
Robert J. Hamers,
Keith G. Ray,
Zhenqiang Ma,
Jennifer T. Choy
Abstract:
The efficacy of oxygen (O) surface terminations on diamond is an important factor for the performance and stability for diamond-based quantum sensors and electronics. Given the wide breadth of O-termination techniques, it can be difficult to discern which method would yield the highest and most consistent O coverage. Furthermore, the interpretation of surface characterization techniques is complic…
▽ More
The efficacy of oxygen (O) surface terminations on diamond is an important factor for the performance and stability for diamond-based quantum sensors and electronics. Given the wide breadth of O-termination techniques, it can be difficult to discern which method would yield the highest and most consistent O coverage. Furthermore, the interpretation of surface characterization techniques is complicated by surface morphology and purity, which if not accounted for will yield inconsistent determination of the oxygen coverage. We present a comprehensive approach to consistently prepare and analyze oxygen termination of surfaces on (100) single-crystalline diamond. We report on X-ray Photoelectron Spectroscopy (XPS) characterization of diamond surfaces treated with six oxidation methods that include various wet chemical oxidation techniques, photochemical oxidation with UV illumination, and steam oxidation using atomic layer deposition (ALD). Our analysis entails a rigorous XPS peak-fitting procedure for measuring the functionalization of O-terminated diamond. The findings herein have provided molecular-level insights on oxidized surfaces in (100) diamond, including the demonstration of clear correlation between the measured oxygen atomic percentage and the presence of molecular contaminants containing nitrogen, silicon, and sulfur. We also provide a comparison of the sp2 carbon content with the O1s atomic percentage and discern a correlation with the diamond samples treated with dry oxidation which eventually tapers off at a max O1s atomic percentage value of 7.09 +/- 0.40%. Given these results, we conclude that the dry oxidation methods yield some of the highest oxygen amounts, with the ALD water vapor technique proving to be the cleanest technique out of all the oxidation methods explored in this work.
△ Less
Submitted 8 May, 2024; v1 submitted 5 April, 2023;
originally announced April 2023.
-
Simulation of two-phase flows at large density ratios and high Reynolds numbers using a discrete unified gas kinetic scheme
Authors:
Jun Lai,
Zuoli Xiao,
Lian-Ping Wang
Abstract:
In order to treat immiscible two-phase flows at large density ratios and high Reynolds numbers, a three-dimensional code based on the discrete unified gas kinetic scheme (DUGKS) is developed, incorporating two major improvements. First, the particle distribution functions at cell interfaces are reconstructed using a weighted essentially non-oscillatory scheme. Second, the conservative lower-order…
▽ More
In order to treat immiscible two-phase flows at large density ratios and high Reynolds numbers, a three-dimensional code based on the discrete unified gas kinetic scheme (DUGKS) is developed, incorporating two major improvements. First, the particle distribution functions at cell interfaces are reconstructed using a weighted essentially non-oscillatory scheme. Second, the conservative lower-order Allen-Cahn equation is chosen, instead of the higher-order Cahn-Hilliard equation, to evolve the free-energy based phase field governing the dynamics of two-phase interfaces. Five benchmark problems are simulated to demonstrate the capability of the approach in treating two phase flows at large density ratios and high Reynolds numbers, including three two dimensional problems (a stationary droplet, Rayleigh-Taylor instability, and a droplet splashing on a thin liquid film) and two three-dimensional problems (binary droplets collision and Rayleigh-Taylor instability). All results agree well with the previous numerical and the experimental results. In these simulations, the density ratio and Reynolds number can reach a large value of O(1000). Our improved approach sets the stage for the DUGKS scheme to handle realistic two-phase flow problems.
△ Less
Submitted 12 July, 2022;
originally announced July 2022.
-
Study of a droplet breakup process in decaying homogeneous isotropic turbulence based on the phase-field DUGKS approach
Authors:
Jun Lai,
Tao Chen,
Shengqi Zhang,
Zuoli Xiao,
Shiyi Chen,
Lian-Ping Wang
Abstract:
The breakup of a spherical droplet in a decaying homogeneous isotropic turbulence is studied by solving the Cahn-Hilliard-Navier-Stokes equations, using the discrete unified gas kinetic scheme combined with the free-energy-based phase-field model. We focus on the combined effects of turbulence and surface tension on the breakup process by assuming that the two fluid phases have the same density an…
▽ More
The breakup of a spherical droplet in a decaying homogeneous isotropic turbulence is studied by solving the Cahn-Hilliard-Navier-Stokes equations, using the discrete unified gas kinetic scheme combined with the free-energy-based phase-field model. We focus on the combined effects of turbulence and surface tension on the breakup process by assuming that the two fluid phases have the same density and same viscosity. The key physical parameters of the system include the volume fraction (6.54%), the initial Weber number (21.7), and the initial Taylor microscale Reynolds number (58). Three distinct stages of droplet evolution are identified, namely, the deformation stage when the initially spherical droplet evolves into an irregular geometric shape with complex structures, the breakup stage when many daughter droplets are formed, and the restoration stage when the droplets relax towards spherical shape. These three stages are analyzed systematically from several perspectives: (1) a geometric perspective concerning the maximum equivalent diameter, the total number of droplets, total interface area, and probability distribution of droplet diameters, (2) a dynamic perspective concerning the evolution of local velocity and vorticity at the fluid-fluid interface, (3) a global perspective concerning the evolution of average kinetic energy / dissipation rate and their Fourier spectra, (4) spherical harmonics based energetics concerning simultaneous transfer of kinetic energy across different length scales and different radii relative to initial droplet center, and (5) the time evolution of global kinetic energy and free energy of the system.
△ Less
Submitted 23 June, 2022;
originally announced June 2022.
-
Ultrafast photothermoelectric effect in Dirac semimetallic Cd3As2 revealed by terahertz emission
Authors:
Wei Lu,
Zipu Fan,
Yunkun Yang,
Junchao Ma,
Jiawei Lai,
Xiaoming Song,
Xiao Zhuo,
Zhaoran Xu,
Jing Liu,
Xiaodong Hu,
Shuyun Zhou,
Faxian Xiu,
Jinluo Cheng,
Dong Sun
Abstract:
The thermoelectric effects of topological semimetals have attracted tremendous research interest because many topological semimetals are excellent thermoelectric materials and thermoelectricity serves as one of their most important potential applications. In this work, we reveal the transient photothermoelectric response of Dirac semimetallic Cd3As2, namely the photo-Seebeck effect and photo-Nerns…
▽ More
The thermoelectric effects of topological semimetals have attracted tremendous research interest because many topological semimetals are excellent thermoelectric materials and thermoelectricity serves as one of their most important potential applications. In this work, we reveal the transient photothermoelectric response of Dirac semimetallic Cd3As2, namely the photo-Seebeck effect and photo-Nernst effect, by studying the terahertz (THz) emission from the transient photocurrent induced by these effects. Our excitation polarization and power dependence confirm that the observed THz emission is due to photothermoelectric effect instead of other nonlinear optical effect. Furthermore, when a weak magnetic field (~0.4 T) is applied, the response clearly indicates an order of magnitude enhancement on transient photothermoelectric current generation compared to the photo-Seebeck effect. Such enhancement supports an ambipolar transport nature of the photo-Nernst current generation in Cd3As2. These results highlight the enhancement of thermoelectric performance can be achieved in topological Dirac semimetals based on the Nernst effect, and our transient studies pave the way for thermoelectric devices applicable for high field circumstance when nonequilibrium state matters. The large THz emission due to highly efficient photothermoelectric conversion is comparable to conventional semiconductors through optical rectification and photo-Dember effect.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
Transient Characteristics of $β$-Ga$_2$O$_3$ Nanomembrane Schottky Barrier Diodes on Various Substrates
Authors:
Junyu Lai,
Jung-Hun Seo
Abstract:
In this paper, a transient delayed rising and fall time of $β$-Ga$_2$O$_3$ NMs Schottky barrier diodes (SBDs) formed on four different substrates (diamond, Si, sapphire, and polyimide) were measured using a sub-micron second resolution time-resolved electrical measurement system under a different temperature condition. The devices exhibited noticeably less-delayed turn-on-/off- the transient time…
▽ More
In this paper, a transient delayed rising and fall time of $β$-Ga$_2$O$_3$ NMs Schottky barrier diodes (SBDs) formed on four different substrates (diamond, Si, sapphire, and polyimide) were measured using a sub-micron second resolution time-resolved electrical measurement system under a different temperature condition. The devices exhibited noticeably less-delayed turn-on-/off- the transient time when $β$-Ga$_2$O$_3$ NMs SBDs were transfer-printed on a high-k substrate. Furthermore, a relationship between the $β$-Ga$_2$O$_3$ NM thicknesses and their transient characteristics were systematically investigated and found that phonon scattering plays an important role in heat dissipation as the thickness of $β$-Ga$_2$O$_3$ NMs get thinner which is also verified by the Multiphysics simulator. Overall, our result reveals the impact of various substrates with different thermal properties and different \b{eta}- Ga2O3 NMs thickness with the performance of $β$-Ga$_2$O$_3$ NMs based devices. Hence, these results can guide further efforts us to optimize the performance of future $β$-Ga$_2$O$_3$ devices by maximizing heat dissipation from the $β$-Ga$_2$O$_3$ layer.
△ Less
Submitted 22 February, 2022;
originally announced February 2022.
-
Direct Light Orbital Angular Momentum Detection in Mid-Infrared based on Type-II Weyl Semimetal TaIrTe4
Authors:
Jiawei Lai,
Junchao Ma,
Zipu Fan,
Xiaoming Song,
Peng Yu,
Zheng Liu,
Pei Zhang,
Yi Shi,
Jinluo Cheng,
Dong Sun
Abstract:
The capability of direct photocurrent detection of orbital angular momentum (OAM) of light has recently been realized with topological Weyl semimetal, but limited to near infrared wavelength range. The extension of direct OAM detection to midinfrared, a wavelength range that plays important role in a vast range of applications, such as autonomous driving, night vision and motion detection, is chal…
▽ More
The capability of direct photocurrent detection of orbital angular momentum (OAM) of light has recently been realized with topological Weyl semimetal, but limited to near infrared wavelength range. The extension of direct OAM detection to midinfrared, a wavelength range that plays important role in a vast range of applications, such as autonomous driving, night vision and motion detection, is challenging and has not yet been realized. This is because most studies of photocurrent responses are not sensitive to the phase information and the photo response is usually very poor in the mid-infrared. In this study, we designed a photodetector based on Type-II Weyl semimetal tantalum iridium tellurides with designed electrode geometries for direct detection of the topological charge of OAM through orbital photogalvanic effect. Our results indicate helical phase gradient of light can be distinguished by a current winding around the optical beam axis with a magnitude proportional to its quantized OAM mode number. The topological enhanced response at mid-infrared of TaIrTe4 further help overcome the low responsivity issues and finally render the direct orbital angular momentum detection capability in mid-infrared. Our study enables on-chip integrated OAM detection, and thus OAM sensitive focal plane arrays in mid-infrared. Such capability triggers new route to explore applications of light carrying OAM, especially that it can crucially promote the performance of many mid-infrared imaging related applications, such as intricate target recognition and night vision.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
Ultra-Broadband Dispersion-Manipulated Dielectric Metalenses by Nonlinear Dispersive Phase Compensation
Authors:
Yueqiang Hu,
Yuting Jiang,
Yi Zhang,
Jiajie Lai,
Peng He,
Xiangnian Ou,
Ling Li,
Huigao Duan
Abstract:
Dispersion decomposes compound light into monochromatic components at different spatial locations, which needs to be eliminated in imaging but utilized in spectral detection. Metasurfaces provide a unique path to modulate the dispersion only by adjusting the structural parameters without changing the material as required for refractive elements. However, the common linear phase compensation does n…
▽ More
Dispersion decomposes compound light into monochromatic components at different spatial locations, which needs to be eliminated in imaging but utilized in spectral detection. Metasurfaces provide a unique path to modulate the dispersion only by adjusting the structural parameters without changing the material as required for refractive elements. However, the common linear phase compensation does not conform to the dispersion characteristics of the meta-unit limiting dispersion modulation in broader wavelength bands, which is desired for ultra-broadband or multiband imaging. Here, we propose a nonlinear dispersive phase compensation method to design polarization-insensitive achromatic metalenses from 400 nm to 1000 nm constructed with single-layer high aspect ratio nanostructures. This band matches the response spectrum of a typical CMOS sensor for both visible and near-infrared imaging applications without additional lens replacement. Moreover, the capability of the method in achieving arbitrary dispersion modulation is demonstrated for applications such as chromatography imaging and spectral detection.
△ Less
Submitted 28 December, 2021;
originally announced December 2021.
-
Investigation of the Imperfect Interface at the Si/GaAs Heterojunction Formed by Ultra-Thin Oxide Interfacial Layer
Authors:
Md Nazmul Hasan,
Yixiong Zheng,
Junyu Lai,
Edward Swinnich,
Olivia Grace Licata,
Mohadeseh A. Baboli,
Baishakhi Mazumder,
Parsian K. Mohseni,
Jung-Hun Seo
Abstract:
The structure property of non-ideal Si/GaAs heterostructures that were integrated with the ultra-thin oxide (UO) tunneling interfacial layer has been systematically investigated. Si nanomembranes (NMs) were oxidized in different time periods prior to the hetero-integration process to create the non-ideal single-side passivated Si/GaAs heterostructure. The atomic level oxygen distribution and the d…
▽ More
The structure property of non-ideal Si/GaAs heterostructures that were integrated with the ultra-thin oxide (UO) tunneling interfacial layer has been systematically investigated. Si nanomembranes (NMs) were oxidized in different time periods prior to the hetero-integration process to create the non-ideal single-side passivated Si/GaAs heterostructure. The atomic level oxygen distribution and the degree of oxygen content in Si NM and GaAs were carefully investigated using the atom probe tomography (APT) and X-ray photoelectron spectroscopy (XPS) to trace the changes in chemical composition and reactional mechanism across the UO interface when the surface of Si NM was exposed to air for different period of time. The negatively induced charges at the UO layer caused the oxygen diffusion to GaAs layer and formed the unwanted GaAs oxide layer. This native oxide stack noticeably degraded the thermal properties of the Si/GaAs heterostructure as Si NMs were more oxidized. This study revealed that the poor surface passivation on the one side of the heterointerface leads to a both-side oxidation, thus severely deteriorating the transport properties across the heterojunction that is formed with the UO layer.
△ Less
Submitted 24 October, 2021;
originally announced October 2021.
-
Metasurface-Enabled On-Chip Multiplexed Diffractive Neural Networks in the Visible
Authors:
Xuhao Luo,
Yueqiang Hu,
Xin Li,
Xiangnian Ou,
Jiajie Lai,
Na Liu,
Huigao Duan
Abstract:
Replacing electrons with photons is a compelling route towards light-speed, highly parallel, and low-power artificial intelligence computing. Recently, all-optical diffractive neural deep neural networks have been demonstrated. However, the existing architectures often comprise bulky components and, most critically, they cannot mimic the human brain for multitasking. Here, we demonstrate a multi-s…
▽ More
Replacing electrons with photons is a compelling route towards light-speed, highly parallel, and low-power artificial intelligence computing. Recently, all-optical diffractive neural deep neural networks have been demonstrated. However, the existing architectures often comprise bulky components and, most critically, they cannot mimic the human brain for multitasking. Here, we demonstrate a multi-skilled diffractive neural network based on a metasurface device, which can perform on-chip multi-channel sensing and multitasking at the speed of light in the visible. The metasurface is integrated with a complementary metal oxide semiconductor imaging sensor. Polarization multiplexing scheme of the subwavelength nanostructures are applied to construct a multi-channel classifier framework for simultaneous recognition of digital and fashionable items. The areal density of the artificial neurons can reach up to 6.25x106/mm2 multiplied by the number of channels. Our platform provides an integrated solution with all-optical on-chip sensing and computing for applications in machine vision, autonomous driving, and precision medicine.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Electrical and Thermal Property of Si/GaAs Heterojunction Formed by Ultra-Thin Oxide Interfacial Layer
Authors:
Md Nazmul Hasan,
Yixiong Zheng,
Junyu Lai,
Edward Swinnich,
Olivia Grace Licata,
Mohadeseh A. Baboli,
Baishakhi Mazumder,
Parsian K. Mohseni,
Jung-Hun Seo
Abstract:
We have successfully demonstrated Si/GaAs p-n heterostructures using Al2O3 ultra-thin oxide interfacial layers. The band diagram and band offsets were investigated using X-ray photoelectron spectroscopy and confirm a small discontinuity in the conduction band (0.03 eV) at the interface. The interface defect density (Dit) values of the heterointerface with different ultra-thin oxide (UO) thicknesse…
▽ More
We have successfully demonstrated Si/GaAs p-n heterostructures using Al2O3 ultra-thin oxide interfacial layers. The band diagram and band offsets were investigated using X-ray photoelectron spectroscopy and confirm a small discontinuity in the conduction band (0.03 eV) at the interface. The interface defect density (Dit) values of the heterointerface with different ultra-thin oxide (UO) thicknesses ranged from 0.35 nm to 3.5 nm and were also characterized based on a metal-oxide-semiconductor capacitor (MOSCAP) structure using a capacitance-voltage measurement. The results revealed that a thin UO interfacial layer (around 1 nm) maximizes carrier transport property due to better surface passivation and efficient tunneling properties. Thermal property investigation also shows that the Al2O3 UO interfacial layer offers a good tunneling layer but also facilitates phonon transport across the interface. Finally, the electrical characterization of Si/GaAs heterojunction p-n diodes confirms reliable rectifying behavior with an extremely low ideality factor; thus, heterogeneous integration using the UO approach offers a robust way to create more types of heterojunctions between dissimilar semiconductors.
△ Less
Submitted 24 October, 2021; v1 submitted 14 July, 2021;
originally announced July 2021.
-
Theoretical Prediction of Heterogeneous Integration of Dissimilar Semiconductor with Various Ultra-Thin Oxides and 2D Materials
Authors:
Md Nazmul Hasan,
Chenxi Li,
Junyu Lai,
Jung-Hun Seo
Abstract:
In this paper, we have built a numerical p-n Si/GaAs heterojunction model using a quantum-mechanical tunneling theory with various quantum tunneling interfacial materials including two-dimensional semiconductors such as hexagonal boron nitride (h-BN) and graphene and ALD-enabled oxide materials such as HfO2, Al2O3, and SiO2. Their tunneling efficiencies and tunneling current with different thickne…
▽ More
In this paper, we have built a numerical p-n Si/GaAs heterojunction model using a quantum-mechanical tunneling theory with various quantum tunneling interfacial materials including two-dimensional semiconductors such as hexagonal boron nitride (h-BN) and graphene and ALD-enabled oxide materials such as HfO2, Al2O3, and SiO2. Their tunneling efficiencies and tunneling current with different thicknesses were systematically calculated and compared. Multiphysics modeling was used with the aforementioned tunneling interfacial materials to analyze changes in strain under different temperature conditions. Considering the transport properties and thermal-induced strain analysis, Al2O3 among three oxide materials and graphene in 2D materials are favorable material choices that offer the highest heterojunction quality. Overall, our results offer the viable route to guide the selection of quantum tunneling materials for myriad possible combinations of new heterostructures that can be obtained via remote epitaxy and the UO method.
△ Less
Submitted 4 July, 2021;
originally announced July 2021.
-
The Notre-Dame Cube: An active-target time-projection chamber for radioactive beam experiments and detector development
Authors:
T. Ahn,
J. S. Randhawa,
S. Aguilar,
D. Blankstein,
L. Delgado,
N. Dixneuf,
S. L. Henderson,
W. Jackson,
L. Jensen,
S. Jin,
J. Koci,
J. J. Kolata,
J. Lai,
J. Levano,
X. Li,
A. Mubarak,
P. D. O'Malley,
S. Rameriz Martin,
M. Renaud,
M. Z. Serikow,
A. Tollefson,
J. Wilson,
L. Yan
Abstract:
Active-target detectors have the potential to address the difficulties associated with the low intensities of radioactive beams. We have developed an active-target detector, the Notre Dame Cube (ND-Cube), to perform experiments with radioactive beams produced at $\mathit{TwinSol}$ and to aid in the development of active-target techniques. Various aspects of the ND-Cube and its design were characte…
▽ More
Active-target detectors have the potential to address the difficulties associated with the low intensities of radioactive beams. We have developed an active-target detector, the Notre Dame Cube (ND-Cube), to perform experiments with radioactive beams produced at $\mathit{TwinSol}$ and to aid in the development of active-target techniques. Various aspects of the ND-Cube and its design were characterized. The ND-Cube was commissioned with a $^{7}$Li beam for measuring $^{40}$Ar + $^{7}$Li fusion reaction cross sections and investigating $^{7}$Li($α$,$α$)$^{7}$Li scattering events. The ND-Cube will be used to study a range of reactions using light radioactive ions produced at low energy.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
Mid-infrared frequency comb with 25 pJ threshold via CW-seeded optical parametric generation in nonlinear waveguide
Authors:
Mikhail Roiz,
Jui-Yu Lai,
Juho Karhu,
Markku Vainio
Abstract:
We demonstrate efficient generation of mid-infrared frequency combs based on continuous-wave-seeded femtosecond optical parametric generation in nonlinear waveguides. Conversion of the near-infrared pump to signal and idler light takes place with very high efficiency (74 %) and the threshold (25 pJ) is over 300 times lower than in bulk analogs. Relative intensity noise of the mid-infrared comb is…
▽ More
We demonstrate efficient generation of mid-infrared frequency combs based on continuous-wave-seeded femtosecond optical parametric generation in nonlinear waveguides. Conversion of the near-infrared pump to signal and idler light takes place with very high efficiency (74 %) and the threshold (25 pJ) is over 300 times lower than in bulk analogs. Relative intensity noise of the mid-infrared comb is exceptionally low, below 5*10-5 (detector-limited, integrated from 10 Hz to 2 MHz). Furthermore, the mid-infrared bandwidth can be increased by driving the process with broadband pump obtained via supercontinuum generation.
△ Less
Submitted 15 August, 2021; v1 submitted 12 April, 2021;
originally announced April 2021.
-
Electrically Tunable Multifunctional All-Dielectric Metasurfaces Integrated with Liquid Crystals in the Visible
Authors:
Yueqiang Hu,
Xiangnian Ou,
Tibin Zeng,
Jiajie Lai,
Jian Zhang,
Xin Li,
Xuhao Luo,
Ling Li,
Fan Fan,
Huigao Duan
Abstract:
As two-dimensional metamaterials, metasurfaces open up new avenues for designing static planar optics. However, the dynamic modulation of metasurfaces in the optical band is required for practical applications. The existing dynamic devices rarely utilized the polarization manipulation capability of metasurfaces. Here, we demonstrate an electrically tunable multifunctional metasurface in the visibl…
▽ More
As two-dimensional metamaterials, metasurfaces open up new avenues for designing static planar optics. However, the dynamic modulation of metasurfaces in the optical band is required for practical applications. The existing dynamic devices rarely utilized the polarization manipulation capability of metasurfaces. Here, we demonstrate an electrically tunable multifunctional metasurface in the visible range by integrating birefringent liquid crystals (LCs) with all-dielectric metasurfaces based on a novel packaging scheme. By combining the helicity-dependent geometric phase of the metasurface and the polarization control ability of LC molecules, continuous intensity tuning and switching of two helicity channels are realized. Electrically tunable single-channel switchable metaholograms, multicolor multiplexed metaholograms, and dynamic varifocal metalenses are designed to verify the concept. The exploration of polarization control in dynamic tuning can pave the way for dynamic metasurface devices in various applications, such as space light modulators, light detection and ranging systems, and holographic displays.
△ Less
Submitted 24 December, 2020;
originally announced December 2020.
-
Inverse scattering reconstruction of a three dimensional sound-soft axis-symmetric impenetrable object
Authors:
Carlos Borges,
Jun Lai
Abstract:
In this work, we consider the problem of reconstructing the shape of a three dimensional impenetrable sound-soft axis-symmetric obstacle from measurements of the scattered field at multiple frequencies. This problem has important applications in locating and identifying obstacles with axial symmetry in general, such as, land mines. We present a two-part framework for recovering the shape of the ob…
▽ More
In this work, we consider the problem of reconstructing the shape of a three dimensional impenetrable sound-soft axis-symmetric obstacle from measurements of the scattered field at multiple frequencies. This problem has important applications in locating and identifying obstacles with axial symmetry in general, such as, land mines. We present a two-part framework for recovering the shape of the obstacle. In part 1, we introduce an algorithm to find the axis of symmetry of the obstacle by making use of the far field pattern. In part 2, we recover the shape of the obstacle by applying the recursive linearization algorithm (RLA) with multifrequency measurements of the scattered field. In the RLA, a sequence of inverse scattering problems using increasing single frequency measurements are solved. Each of those problems is ill-posed and nonlinear. The ill-posedness is treated by using a band-limited representation for the shape of the obstacle, while the nonlinearity is dealt with by applying the damped Gauss-Newton method. When using the RLA, a large number of forward scattering problems must be solved. Hence, it is paramount to have an efficient and accurate forward problem solver. For the forward problem, we apply separation of variables in the azimuthal coordinate and Fourier decompose the resulting problem, leaving us with a sequence of decoupled simpler forward scattering problems to solve. Numerical examples for the inverse problem are presented to show the feasibility of our two-part framework in different scenarios, particularly for objects with non-smooth boundaries.
△ Less
Submitted 4 May, 2020;
originally announced May 2020.
-
Robust Ultraviolet to Near-infrared Quantum Emitters in Hexagonal Boron Nitride up to 1100 K
Authors:
Qing-Hai Tan,
Jia-Min Lai,
Xue-Lu Liu,
Yong-Zhou Xue,
Xiu-Ming Dou,
Bao-Quan Sun,
Wei-Bo Gao,
Ping-Heng Tan,
Jun Zhang
Abstract:
A stable single-photon source working at high temperatures with high brightness and covering full band emission from one host material is critically important for quantum technologies. Here, we find that the certain hBN single-photon emissions (SPEs) can be significantly enhanced by lasers with special wavelengths, which largely broaden the wavelength range of the hBN emitters, down to ultraviolet…
▽ More
A stable single-photon source working at high temperatures with high brightness and covering full band emission from one host material is critically important for quantum technologies. Here, we find that the certain hBN single-photon emissions (SPEs) can be significantly enhanced by lasers with special wavelengths, which largely broaden the wavelength range of the hBN emitters, down to ultraviolet (357 nm) and up to near-infrared (912 nm). Importantly, these hBN SPEs are still stable even at the temperature up to 1100 Kelvin. The decoupling between single-photon and acoustic phonon is observed at high temperatures. Our work suggests that hBN can be a good host material for generating single-photon sources with ultrabroad wavelength range.
△ Less
Submitted 31 October, 2021; v1 submitted 18 August, 2019;
originally announced August 2019.
-
EdMot: An Edge Enhancement Approach for Motif-aware Community Detection
Authors:
Pei-Zhen Li,
Ling Huang,
Chang-Dong Wang,
Jian-Huang Lai
Abstract:
Network community detection is a hot research topic in network analysis. Although many methods have been proposed for community detection, most of them only take into consideration the lower-order structure of the network at the level of individual nodes and edges. Thus, they fail to capture the higher-order characteristics at the level of small dense subgraph patterns, e.g., motifs. Recently, som…
▽ More
Network community detection is a hot research topic in network analysis. Although many methods have been proposed for community detection, most of them only take into consideration the lower-order structure of the network at the level of individual nodes and edges. Thus, they fail to capture the higher-order characteristics at the level of small dense subgraph patterns, e.g., motifs. Recently, some higher-order methods have been developed but they typically focus on the motif-based hypergraph which is assumed to be a connected graph. However, such assumption cannot be ensured in some real-world networks. In particular, the hypergraph may become fragmented. That is, it may consist of a large number of connected components and isolated nodes, despite the fact that the original network is a connected graph. Therefore, the existing higher-order methods would suffer seriously from the above fragmentation issue, since in these approaches, nodes without connection in hypergraph can't be grouped together even if they belong to the same community. To address the above fragmentation issue, we propose an Edge enhancement approach for Motif-aware community detection (EdMot). The main idea is as follows. Firstly, a motif-based hypergraph is constructed and the top K largest connected components in the hypergraph are partitioned into modules. Afterwards, the connectivity structure within each module is strengthened by constructing an edge set to derive a clique from each module. Based on the new edge set, the original connectivity structure of the input network is enhanced to generate a rewired network, whereby the motif-based higher-order structure is leveraged and the hypergraph fragmentation issue is well addressed. Finally, the rewired network is partitioned to obtain the higher-order community structure.
△ Less
Submitted 30 May, 2019;
originally announced June 2019.
-
An immersed boundary method for fluid--structure--acoustics interactions involving large deformations and complex geometries
Authors:
Li Wang,
Fang-Bao Tian,
Joseph C. S. Lai
Abstract:
This paper presents an immersed boundary (IB) method for fluid--structure--acoustics interactions involving large deformations and complex geometries. In this method, the fluid dynamics is solved by a finite difference method where the temporal, viscous and convective terms are respectively discretized by the third-order Runge-Kutta scheme, the fourth-order central difference scheme and a fifth-or…
▽ More
This paper presents an immersed boundary (IB) method for fluid--structure--acoustics interactions involving large deformations and complex geometries. In this method, the fluid dynamics is solved by a finite difference method where the temporal, viscous and convective terms are respectively discretized by the third-order Runge-Kutta scheme, the fourth-order central difference scheme and a fifth-order W/TENO (Weighted/Targeted Essentially Non-oscillation) scheme. Without loss of generality, a nonlinear flexible plate is considered here, and is solved by a finite element method based on the absolute nodal coordinate formulation. The no-slip boundary condition at the fluid--structure interface is achieved by using a diffusion-interface penalty IB method. With the above proposed method, the aeroacoustics field generated by the moving boundaries and the associated flows are inherently solved. In order to validate and verify the current method, several benchmark cases are conducted: acoustic waves scattered from a stationary cylinder in a quiescent flow, sound generation by a stationary and a rotating cylinder in a uniform flow, sound generation by an insect in hovering flight, deformation of a red blood cell induced by acoustic waves and acoustic waves scattered by a stationary sphere. The comparison of the sound scattered by a cylinder shows that the present IB--WENO scheme, a simple approach, has an excellent performance which is even better than the implicit IB--lattice Boltzmann method. For the sound scattered by a sphere, the IB--TENO scheme has a lower dissipation compared with the IB--WENO scheme. Applications of this technique to model fluid-structure-acoustics interactions of flapping foils mimicking an insect wing section during forward flight and flapping foil energy harvester are also presented, considering the effects of foil shape and flexibility.
△ Less
Submitted 1 May, 2019;
originally announced May 2019.
-
COMET Phase-I Technical Design Report
Authors:
The COMET Collaboration,
R. Abramishvili,
G. Adamov,
R. R. Akhmetshin,
A. Allin,
J. C. Angélique,
V. Anishchik,
M. Aoki,
D. Aznabayev,
I. Bagaturia,
G. Ban,
Y. Ban,
D. Bauer,
D. Baygarashev,
A. E. Bondar,
C. Cârloganu,
B. Carniol,
T. T. Chau,
J. K. Chen,
S. J. Chen,
Y. E. Cheung,
W. da Silva,
P. D. Dauncey,
C. Densham,
G. Devidze
, et al. (170 additional authors not shown)
Abstract:
The Technical Design for the COMET Phase-I experiment is presented in this paper. COMET is an experiment at J-PARC, Japan, which will search for neutrinoless conversion of muons into electrons in the field of an aluminium nucleus ($μ-e$ conversion, $μ^- N \to e^- N$); a lepton flavor violating process. The experimental sensitivity goal for this process in the Phase-I experiment is…
▽ More
The Technical Design for the COMET Phase-I experiment is presented in this paper. COMET is an experiment at J-PARC, Japan, which will search for neutrinoless conversion of muons into electrons in the field of an aluminium nucleus ($μ-e$ conversion, $μ^- N \to e^- N$); a lepton flavor violating process. The experimental sensitivity goal for this process in the Phase-I experiment is $3.1\times10^{-15}$, or 90 % upper limit of branching ratio of $7\times 10^{-15}$, which is a factor of 100 improvement over the existing limit. The expected number of background events is 0.032. To achieve the target sensitivity and background level, the 3.2 kW 8 GeV proton beam from J-PARC will be used. Two types of detectors, CyDet and StrECAL, will be used for detecting the \mue conversion events, and for measuring the beam-related background events in view of the Phase-II experiment, respectively. Results from simulation on signal and background estimations are also described.
△ Less
Submitted 19 May, 2020; v1 submitted 21 December, 2018;
originally announced December 2018.
-
An FFT-accelerated direct solver for electromagnetic scattering from penetrable axisymmetric objects
Authors:
Jun Lai,
Michael O'Neil
Abstract:
Fast, high-order accurate algorithms for electromagnetic scattering from axisymmetric objects are of great importance when modeling physical phenomena in optics, materials science (e.g. meta-materials), and many other fields of applied science. In this paper, we develop an FFT-accelerated separation of variables solver that can be used to efficiently invert integral equation formulations of Maxwel…
▽ More
Fast, high-order accurate algorithms for electromagnetic scattering from axisymmetric objects are of great importance when modeling physical phenomena in optics, materials science (e.g. meta-materials), and many other fields of applied science. In this paper, we develop an FFT-accelerated separation of variables solver that can be used to efficiently invert integral equation formulations of Maxwell's equations for scattering from axisymmetric penetrable (dielectric) bodies. Using a standard variant of Müller's integral representation of the fields, our numerical solver rapidly and directly inverts the resulting second-kind integral equation. In particular, the algorithm of this work (1) rapidly evaluates the modal Green's functions, and their derivatives, via kernel splitting and the use of novel recursion formulas, (2) discretizes the underlying integral equation using generalized Gaussian quadratures on adaptive meshes, and (3) is applicable to geometries containing edges. Several numerical examples are provided to demonstrate the efficiency and accuracy of the aforementioned algorithm in various geometries.
△ Less
Submitted 2 April, 2019; v1 submitted 16 October, 2018;
originally announced October 2018.
-
Ultrafast Relaxation Dynamics of Photoexcited Dirac Fermion in The Three Dimensional Dirac Semimetal Cadmium Arsenide
Authors:
Wei Lu,
Shaofeng Ge,
Xuefeng Liu,
Hong Lu,
Caizhen Li,
Jiawei Lai,
Chuan Zhao,
Zhimin Liao,
Shuang Jia,
Dong Sun
Abstract:
Three dimensional (3D) Dirac semimetals which can be seen as 3D analogues of graphene have attracted enormous interests in research recently. In order to apply these ultrahigh-mobility materials in future electronic/optoelectronic devices, it is crucial to understand the relaxation dynamics of photoexcited carriers and their coupling with lattice. In this work, we report ultrafast transient reflec…
▽ More
Three dimensional (3D) Dirac semimetals which can be seen as 3D analogues of graphene have attracted enormous interests in research recently. In order to apply these ultrahigh-mobility materials in future electronic/optoelectronic devices, it is crucial to understand the relaxation dynamics of photoexcited carriers and their coupling with lattice. In this work, we report ultrafast transient reflection measurements of the photoexcited carrier dynamics in cadmium arsenide (Cd3As2), which is one of the most stable Dirac semimetals that have been confirmed experimentally. By using low energy probe photon of 0.3 eV, we probed the dynamics of the photoexcited carriers that are Dirac-Fermi-like approaching the Dirac point. We systematically studied the transient reflection on bulk and nanoplate samples that have different doping intensities by tuning the probe wavelength, pump power and lattice temperature, and find that the dynamical evolution of carrier distributions can be retrieved qualitatively by using a two-temperature model. This result is very similar to that of graphene, but the carrier cooling through the optical phonon couplings is slower and lasts over larger electron temperature range because the optical phonon energies in Cd3As2 are much lower than those in graphene.
△ Less
Submitted 18 January, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.
-
A Quantitative Study of the Effect of Cladding Thickness on Modal Confinement Loss in Photonic Waveguides
Authors:
Shidong Jiang,
Jun Lai
Abstract:
There has been increasing interest in making the photonic devices more and more compact in the integrated photonics industry, and one of the important questions for manufacturers and design engineers is how to quantify the effect of the finite cladding thickness on the modal confinement loss of photonic waveguides. This requires at least six to seven digits accuracy for the computation of propagat…
▽ More
There has been increasing interest in making the photonic devices more and more compact in the integrated photonics industry, and one of the important questions for manufacturers and design engineers is how to quantify the effect of the finite cladding thickness on the modal confinement loss of photonic waveguides. This requires at least six to seven digits accuracy for the computation of propagation constant $β$ since the modal confinement loss is proportional to the imaginary part of $β$ that is six to seven orders of magnitude smaller than its real part by the industrial standard. In this paper, we present an accurate and efficient method to compute the propagation constant of electromagnetic modes of photonic waveguides with arbitrary number of (nonsmooth) inclusions in a layered media. The method combines a well-conditioned boundary integral equation formulation for photonic waveguides which requires the discretization of the material interface only, and efficient Sommerfeld integral representations to treat the effect of the layered medium. Our scheme is capable of calculating the propagation loss of the electromagnetic modes with high fidelity, even for waveguides with corners imbedded in a cladding material of finite thickness. The numerical results, with more than $10$-digit accuracy, show quantitatively that the modal confinement loss of the rectangular waveguide increases exponentially fast as the cladding thickness decreases.
△ Less
Submitted 9 July, 2016;
originally announced July 2016.
-
Community Detection Using Multilayer Edge Mixture Model
Authors:
Han Zhang,
Chang-Dong Wang,
Jian-Huang Lai,
Philip S. Yu
Abstract:
A wide range of complex systems can be modeled as networks with corresponding constraints on the edges and nodes, which have been extensively studied in recent years. Nowadays, with the progress of information technology, systems that contain the information collected from multiple perspectives have been generated. The conventional models designed for single perspective networks fail to depict the…
▽ More
A wide range of complex systems can be modeled as networks with corresponding constraints on the edges and nodes, which have been extensively studied in recent years. Nowadays, with the progress of information technology, systems that contain the information collected from multiple perspectives have been generated. The conventional models designed for single perspective networks fail to depict the diverse topological properties of such systems, so multilayer network models aiming at describing the structure of these networks emerge. As a major concern in network science, decomposing the networks into communities, which usually refers to closely interconnected node groups, extracts valuable information about the structure and interactions of the network. Unlike the contention of dozens of models and methods in conventional single-layer networks, methods aiming at discovering the communities in the multilayer networks are still limited. In order to help explore the community structure in multilayer networks, we propose the multilayer edge mixture model, which explores a relatively general form of a community structure evaluator from an edge combination view. As an example, we demonstrate that the multilayer modularity and stochastic blockmodels can be derived from the proposed model. We also explore the decomposition of community structure evaluators with specific forms to the multilayer edge mixture model representation, which turns out to reveal some new interpretation of the evaluators. The flexibility and performance on different networks of the proposed model are illustrated with applications on a series of benchmark networks.
△ Less
Submitted 19 May, 2016;
originally announced May 2016.
-
Modularity in Complex Multilayer Networks with Multiple Aspects: A Static Perspective
Authors:
Han Zhang,
Chang-Dong Wang,
Jian-Huang Lai,
Philip S. Yu
Abstract:
Complex systems are usually illustrated by networks which captures the topology of the interactions between the entities. To better understand the roles played by the entities in the system one needs to uncover the underlying community structure of the system. In recent years, systems with interactions that have various types or can change over time between the entities have attracted an increasin…
▽ More
Complex systems are usually illustrated by networks which captures the topology of the interactions between the entities. To better understand the roles played by the entities in the system one needs to uncover the underlying community structure of the system. In recent years, systems with interactions that have various types or can change over time between the entities have attracted an increasing research attention. However, algorithms aiming to solve the key problem - community detection - in multilayer networks are still limited. In this work, we first introduce the multilayer network model representation with multiple aspects, which is flexible to a variety of networks. Then based on this model, we naturally derive the multilayer modularity - a widely adopted objective function of community detection in networks - from a static perspective as an evaluation metric to evaluate the quality of the communities detected in multilayer networks. It enables us to better understand the essence of the modularity by pointing out the specific kind of communities that will lead to a high modularity score. We also propose a spectral method called mSpec for the optimization of the proposed modularity function based on the supra-adjacency representation of the multilayer networks. Experiments on the electroencephalograph network and the comparison results on several empirical multilayer networks demonstrate the feasibility and reliable performance of the proposed method.
△ Less
Submitted 19 May, 2016;
originally announced May 2016.
-
Fast switchable electro-optic radial polarization retarder
Authors:
B. C. Lim,
P. B. Phua,
W. J. Lai,
M. H. Hong
Abstract:
A fast, switchable electro-optic radial polarization retarder (EO-RPR) fabricated using the electro-optic ceramic PMN-PT is presented. This EO-RPR is useful for fast, switchable generation of pure cylindrical vector beam. When used together with a pair of half-wave plates, the EO-RPR can change circularly polarized light into any cylindrical vector beam of interest such as radially or azimuthall…
▽ More
A fast, switchable electro-optic radial polarization retarder (EO-RPR) fabricated using the electro-optic ceramic PMN-PT is presented. This EO-RPR is useful for fast, switchable generation of pure cylindrical vector beam. When used together with a pair of half-wave plates, the EO-RPR can change circularly polarized light into any cylindrical vector beam of interest such as radially or azimuthally polarized light. Radially and azimuthally polarized light with purities greater than 95% are generated experimentally. The advantages of using EO-RPR include fast response times, low driving voltage and transparency in a wide spectral range (500 -7000 nm).
△ Less
Submitted 21 January, 2008;
originally announced January 2008.
-
High power radially polarized light generated from photonic crystal segmented half-wave-plate
Authors:
P. B. Phua,
W. J. Lai,
Y. L. Lim,
B. S. Tan,
R. F. Wu,
K. S. Lai,
H. W. Tan
Abstract:
We have generated more than 100 watts of radial polarized beam from a Yb fiber laser using a photonics crystal segmented half-wave-plate. We demonstrated the high power handling capability of such a photonics crystal segmented half-wave-plate and show that it is a promising external radial polarization converter for high power Yb fiber laser used in laser cutting industry.
We have generated more than 100 watts of radial polarized beam from a Yb fiber laser using a photonics crystal segmented half-wave-plate. We demonstrated the high power handling capability of such a photonics crystal segmented half-wave-plate and show that it is a promising external radial polarization converter for high power Yb fiber laser used in laser cutting industry.
△ Less
Submitted 25 October, 2007;
originally announced October 2007.
-
A high fidelity approximation of radial polarization conversion
Authors:
P. B. Phua,
W. J. Lai,
Yuan Liang Lim
Abstract:
We report a high fidelity (>90%) approximation of radial polarization conversion using a birefringent lens. It offers the advantages of low-cost, easy fabrication, alignment robustness and high laser power handling capability.
We report a high fidelity (>90%) approximation of radial polarization conversion using a birefringent lens. It offers the advantages of low-cost, easy fabrication, alignment robustness and high laser power handling capability.
△ Less
Submitted 15 October, 2007;
originally announced October 2007.
-
Polarization Retarder with Cylindrical-Symmetry for Radially Polarized Light
Authors:
P. B. Phua,
W. J. Lai,
Yuan Liang Lim
Abstract:
We demonstrate a cylindrically-symmetric polarization retarder for generating exact radially polarized light. It involves an uni-axial crystal whose crystallographic optics axis is aligned to its optical axis. This method offers high power-handling capability
We demonstrate a cylindrically-symmetric polarization retarder for generating exact radially polarized light. It involves an uni-axial crystal whose crystallographic optics axis is aligned to its optical axis. This method offers high power-handling capability
△ Less
Submitted 15 October, 2007;
originally announced October 2007.
-
Ultra-Broadband Radial Polarization Conversion based on Goos-Hanchen Shift
Authors:
P. B. Phua,
W. J. Lai
Abstract:
We demonstrate, for the first time, a scheme that generates radially-polarized light using Goos-Hanchen shift of a cylindrically symmetric Total Internal Reflection. It allows ultra-broadband radial polarization conversion for wavelengths differing >1 micron.
We demonstrate, for the first time, a scheme that generates radially-polarized light using Goos-Hanchen shift of a cylindrically symmetric Total Internal Reflection. It allows ultra-broadband radial polarization conversion for wavelengths differing >1 micron.
△ Less
Submitted 15 October, 2007;
originally announced October 2007.
-
Simple Coherent Polarization Manipulation Scheme for Generating High Power Radially Polarized Beam
Authors:
P. B. Phua,
W. J. Lai
Abstract:
We present a simple novel scheme that converts a Gaussian beam into an approximated radially polarized beam using coherent polarization manipulation together with Poynting walk-off in birefringent crystals. Our scheme alleviates the interferometric stability required by previous schemes that implemented this coherent mode summation using Mach-Zehnder-like interferometers. A symmetrical arrangeme…
▽ More
We present a simple novel scheme that converts a Gaussian beam into an approximated radially polarized beam using coherent polarization manipulation together with Poynting walk-off in birefringent crystals. Our scheme alleviates the interferometric stability required by previous schemes that implemented this coherent mode summation using Mach-Zehnder-like interferometers. A symmetrical arrangement of two walk-off crystals with a half-wave plate, allows coherence control even when the laser has short temporal coherence length. We generated 14 watts of radially polarized beam from an Ytterbium fiber laser, only limited by the available fiber laser power.
△ Less
Submitted 24 July, 2007;
originally announced July 2007.