-
Nonlinear refractive index changes and absorption coefficients in mesoscopic ring induced by variable effective mass
Authors:
Denise Assafrao,
A. G. de Lima,
Edilberto O. Silva,
Cleverson Filgueiras
Abstract:
This study explores the linear and nonlinear optical absorption coefficients (OAC) and refractive index changes (RIC) in quantum dot and quantum antidot systems with a position-dependent variable effective mass. Significant contributions to both linear and nonlinear OAC and RIC are observed. Our findings reveal that variations of the mass parameter modify the intersubband dipole matrix elements an…
▽ More
This study explores the linear and nonlinear optical absorption coefficients (OAC) and refractive index changes (RIC) in quantum dot and quantum antidot systems with a position-dependent variable effective mass. Significant contributions to both linear and nonlinear OAC and RIC are observed. Our findings reveal that variations of the mass parameter modify the intersubband dipole matrix elements and energy intervals, leading to noticeable shifts in optical properties. The results show that higher γ values shift resonance peaks towards higher energies, while changes in the oscillator frequency result in abrupt shifts and peak diminutions. These insights provide a deeper understanding of the optical behaviors in the quantum systems under consideration, paving the way for designing devices with optimal efficiency
△ Less
Submitted 29 August, 2024;
originally announced August 2024.
-
Can Ephapticity Contributes to the Brain Complexity?
Authors:
Gabriel Moreno Cunha,
Gillberto Corso,
Matheus Phellipe Brasil de Sousa,
Gustavo Zampier dos Santos Lima
Abstract:
The inquiry into the origin of brain complexity remains a pivotal question in neuroscience. While synaptic stimuli are acknowledged as significant, their efficacy often falls short in elucidating the extensive interconnections of the brain and nuanced levels of cognitive integration. Recent advances in neuroscience have brought the mechanisms underlying the generation of highly intricate dynamics,…
▽ More
The inquiry into the origin of brain complexity remains a pivotal question in neuroscience. While synaptic stimuli are acknowledged as significant, their efficacy often falls short in elucidating the extensive interconnections of the brain and nuanced levels of cognitive integration. Recent advances in neuroscience have brought the mechanisms underlying the generation of highly intricate dynamics, emergent patterns, and sophisticated oscillatory signals into question. Within this context, our study, in alignment with current research, posits the hypothesis that ephaptic communication may emerge as the primary candidate for unraveling optimal brain complexity. In this investigation, we conducted a comparative analysis between two types of networks utilizing the Quadratic Integrate-and-Fire Ephaptic model (QIF-E): (I) a small-world synaptic network (ephaptic-off) and (II) a mixed composite network comprising a small-world synaptic network with the addition of an ephaptic network (ephaptic-on). Utilizing the Multiscale Entropy methodology, we conducted an in-depth analysis of the responses generated by both network configurations, with complexity assessed by integrating across all temporal scales. Our findings demonstrate that ephaptic coupling enhances complexity under specific topological conditions, considering variables such as time, spatial scales, and synaptic intensity. These results offer fresh insights into the dynamics of communication within the nervous system and underscore the fundamental role of ephapticity in regulating complex brain functions.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
Partially coherent beam: Theory and simulation
Authors:
Gubio G. de Lima,
Sinara S. Dourado
Abstract:
Since the development of lasers, we have continuously sought to advance techniques and theory to obtain beams with a high degree of coherence, as natural light sources provide incoherent light. However, there are applications where it is advantageous to use partially coherent (PC) beams in a controlled manner, such as in propagation through turbulent media. To generate a PC beam in the laboratory…
▽ More
Since the development of lasers, we have continuously sought to advance techniques and theory to obtain beams with a high degree of coherence, as natural light sources provide incoherent light. However, there are applications where it is advantageous to use partially coherent (PC) beams in a controlled manner, such as in propagation through turbulent media. To generate a PC beam in the laboratory or in simulations, specific theories and methods are required. In this article, we provide an introduction to PC beam theory, describing how to generate them through modal decompositions and a step-by-step guide for simulating and analyzing beam generation inspired by experiments. To illustrate the methods, we present Gaussian Schell-Model beams as an example.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Transmission of optical communication signals through ring core fiber using perfect vortex beams
Authors:
Nelson Villalba,
Cristóbal Melo,
Sebastián Ayala,
Christopher Mancilla,
Wladimir Valenzuela,
Miguel Figueroa,
Erik Baradit,
Riu Lin,
Ming Tang,
Stephen P. Walborn,
Gustavo Lima,
Gabriel Saavedra,
Gustavo Cañas
Abstract:
Orbital angular momentum can be used to implement high capacity data transmission systems that can be applied for classical and quantum communications. Here we experimentally study the generation and transmission properties of the so-called perfect vortex beams and the Laguerre-Gaussian beams in ring-core optical fibers. Our results show that when using a single preparation stage, the perfect vort…
▽ More
Orbital angular momentum can be used to implement high capacity data transmission systems that can be applied for classical and quantum communications. Here we experimentally study the generation and transmission properties of the so-called perfect vortex beams and the Laguerre-Gaussian beams in ring-core optical fibers. Our results show that when using a single preparation stage, the perfect vortex beams present less ring-radius variation that allows coupling of higher optical power into a ring core fiber. These results lead to lower power requirements to establish fiber-based communications links using orbital angular momentum and set the stage for future implementations of high-dimensional quantum communication over space division multiplexing fibers.
△ Less
Submitted 13 September, 2023; v1 submitted 22 August, 2023;
originally announced August 2023.
-
Non-Markovianity in High-Dimensional Open Quantum Systems using Next-generation Multicore Optical Fibers
Authors:
Santiago Rojas-Rojas,
Daniel Martínez,
Kei Sawada,
Luciano Pereira,
Stephen P. Walborn,
Esteban S. Gómez,
Nadja K. Bernardes,
Gustavo Lima
Abstract:
With the advent of quantum technology, the interest in communication tasks assisted by quantum systems has increased both in academia and industry. Nonetheless, the transmission of a quantum state in real-world scenarios is bounded by environmental noise, so that the quantum channel is an open quantum system. In this work, we study a high-dimensional open quantum system in a multicore optical fibe…
▽ More
With the advent of quantum technology, the interest in communication tasks assisted by quantum systems has increased both in academia and industry. Nonetheless, the transmission of a quantum state in real-world scenarios is bounded by environmental noise, so that the quantum channel is an open quantum system. In this work, we study a high-dimensional open quantum system in a multicore optical fiber by characterizing the environmental interaction as quantum operations corresponding to probabilistic phase-flips. The experimental platform is currently state-of-the-art for quantum information processing with multicore fibers. At a given evolution stage we observe a non-Markovian behaviour of the system, which is demonstrated through a proof-of-principle implementation of the Quantum Vault protocol. A better understanding of phase-noise in multicore fibers will improve several real-world communication protocols, since they are a prime candidate to be adopted in future telecom networks.
△ Less
Submitted 8 August, 2024; v1 submitted 31 July, 2023;
originally announced August 2023.
-
All-in-fiber dynamic orbital angular momentum mode sorting
Authors:
Alvaro Alarcón,
Santiago Gómez,
Daniel Spegel-Lexne,
Joakim Argillander,
Jaime Cariñe,
Gustavo Cañas,
Gustavo Lima,
Guilherme B. Xavier
Abstract:
The orbital angular momentum (OAM) spatial degree of freedom of light has been widely explored in many applications, including telecommunications, quantum information and light-based micro-manipulation. The ability to separate and distinguish between the different transverse spatial modes is called mode sorting or mode demultiplexing, and it is essential to recover the encoded information in such…
▽ More
The orbital angular momentum (OAM) spatial degree of freedom of light has been widely explored in many applications, including telecommunications, quantum information and light-based micro-manipulation. The ability to separate and distinguish between the different transverse spatial modes is called mode sorting or mode demultiplexing, and it is essential to recover the encoded information in such applications. An ideal $d$ mode sorter should be able to faithfully distinguish between the different $d$ spatial modes, with minimal losses, have $d$ outputs, and have fast response times. All previous mode sorters rely on bulk optical elements such as spatial light modulators, which cannot be quickly tuned and have additional losses if they are to be integrated with optical fiber systems. Here we propose and experimentally demonstrate, to the best of our knowledge, the first all-in-fiber method for OAM mode sorting with ultra-fast dynamic reconfigurability. Our scheme first decomposes the OAM mode in fiber-optical linearly polarized (LP) modes, and then interferometrically recombines them to determine the topological charge, thus correctly sorting the OAM mode. In addition, our setup can also be used to perform ultra-fast routing of the OAM modes. These results show a novel and fiber integrated form of optical spatial mode sorting that can be readily used for many new applications in classical and quantum information processing.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Quantum random number generation based on a perovskite light emitting diode
Authors:
Joakim Argillander,
Alvaro Alarcón,
Chunxiong Bao,
Chaoyang Kuang,
Gustavo Lima,
Feng Gao,
Guilherme B. Xavier
Abstract:
The recent development of perovskite light emitting diodes (PeLEDs) has the potential to revolutionize the fields of optical communication and lighting devices, due to their simplicity of fabrication and outstanding optical properties. Here we demonstrate, for the first time, that PeLEDs can also be used in the field of quantum technologies by demonstrating a highly-secure quantum random number ge…
▽ More
The recent development of perovskite light emitting diodes (PeLEDs) has the potential to revolutionize the fields of optical communication and lighting devices, due to their simplicity of fabrication and outstanding optical properties. Here we demonstrate, for the first time, that PeLEDs can also be used in the field of quantum technologies by demonstrating a highly-secure quantum random number generator (QRNG). Modern QRNGs that certify their privacy are posed to replace widely adopted pseudo and true classical random number generators in applications such as encryption and gambling, and therefore, need to be cheap, fast and with integration capabilities. Using a compact metal-halide PeLED source, we generate random numbers, which are certified to be secure against an eavesdropper, following the quantum measurement-device-independent scenario. The obtained random number generation rate of more than 10 Mbit s$^{-1}$, which is already comparable to actual commercial devices, shows that PeLEDs can work as high-quality light sources for quantum information tasks, thus paving the way for future developments of quantum technologies. Lastly, we argue that the simpler PeLED manufacturing process, when comparing to solid-state devices, may have large environmental impacts when quantum technology systems become more mass produced, due to the possible lower carbon footprint.
△ Less
Submitted 19 December, 2022;
originally announced December 2022.
-
Celeritas: GPU-accelerated particle transport for detector simulation in High Energy Physics experiments
Authors:
S. C. Tognini,
P. Canal,
T. M. Evans,
G. Lima,
A. L. Lund,
S. R. Johnson,
S. Y. Jun,
V. R. Pascuzzi,
P. K. Romano
Abstract:
Within the next decade, experimental High Energy Physics (HEP) will enter a new era of scientific discovery through a set of targeted programs recommended by the Particle Physics Project Prioritization Panel (P5), including the upcoming High Luminosity Large Hadron Collider (LHC) HL-LHC upgrade and the Deep Underground Neutrino Experiment (DUNE). These efforts in the Energy and Intensity Frontiers…
▽ More
Within the next decade, experimental High Energy Physics (HEP) will enter a new era of scientific discovery through a set of targeted programs recommended by the Particle Physics Project Prioritization Panel (P5), including the upcoming High Luminosity Large Hadron Collider (LHC) HL-LHC upgrade and the Deep Underground Neutrino Experiment (DUNE). These efforts in the Energy and Intensity Frontiers will require an unprecedented amount of computational capacity on many fronts including Monte Carlo (MC) detector simulation. In order to alleviate this impending computational bottleneck, the Celeritas MC particle transport code is designed to leverage the new generation of heterogeneous computer architectures, including the exascale computing power of U.S. Department of Energy (DOE) Leadership Computing Facilities (LCFs), to model targeted HEP detector problems at the full fidelity of Geant4. This paper presents the planned roadmap for Celeritas, including its proposed code architecture, physics capabilities, and strategies for integrating it with existing and future experimental HEP computing workflows.
△ Less
Submitted 22 March, 2022; v1 submitted 16 March, 2022;
originally announced March 2022.
-
Detector and Beamline Simulation for Next-Generation High Energy Physics Experiments
Authors:
Sunanda Banerjee,
D. N. Brown,
David N. Brown,
Paolo Calafiura,
Jacob Calcutt,
Philippe Canal,
Miriam Diamond,
Daniel Elvira,
Thomas Evans,
Renee Fatemi,
Krzysztof Genser,
Robert Hatcher,
Alexander Himmel,
Seth R. Johnson,
Soon Yung Jun,
Michael Kelsey,
Evangelos Kourlitis,
Robert K. Kutschke,
Guilherme Lima,
Kevin Lynch,
Kendall Mahn,
Zachary Marshall,
Michael Mooney,
Adam Para,
Vincent R. Pascuzzi
, et al. (9 additional authors not shown)
Abstract:
The success of high energy physics programs relies heavily on accurate detector simulations and beam interaction modeling. The increasingly complex detector geometries and beam dynamics require sophisticated techniques in order to meet the demands of current and future experiments. Common software tools used today are unable to fully utilize modern computational resources, while data-recording rat…
▽ More
The success of high energy physics programs relies heavily on accurate detector simulations and beam interaction modeling. The increasingly complex detector geometries and beam dynamics require sophisticated techniques in order to meet the demands of current and future experiments. Common software tools used today are unable to fully utilize modern computational resources, while data-recording rates are often orders of magnitude larger than what can be produced via simulation. In this paper, we describe the state, current and future needs of high energy physics detector and beamline simulations and related challenges, and we propose a number of possible ways to address them.
△ Less
Submitted 20 April, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Generalized statistics: applications to data inverse problems with outlier-resistance
Authors:
João V. T. de Lima,
Sérgio Luiz E. F. da Silva,
João M. de Araújo,
Gilberto Corso,
Gustavo Z. dos Santos Lima
Abstract:
The conventional approach to data-driven inversion framework is based on Gaussian statistics that presents serious difficulties, especially in the presence of outliers in the measurements. In this work, we present maximum likelihood estimators associated with generalized Gaussian distributions in the context of Rényi, Tsallis and Kaniadakis statistics. In this regard, we analytically analyse the o…
▽ More
The conventional approach to data-driven inversion framework is based on Gaussian statistics that presents serious difficulties, especially in the presence of outliers in the measurements. In this work, we present maximum likelihood estimators associated with generalized Gaussian distributions in the context of Rényi, Tsallis and Kaniadakis statistics. In this regard, we analytically analyse the outlier-resistance of each proposal through the so-called influence function. In this way, we formulate inverse problems by constructing objective functions linked to the maximum likelihood estimators. To demonstrate the robustness of the generalized methodologies, we consider an important geophysical inverse problem with high noisy data with spikes. The results reveal that the best data inversion performance occurs when the entropic index from each generalized statistic is associated with objective functions proportional to the inverse of the error amplitude. We argue that in such a limit the three approaches are resistant to outliers and are also equivalent, which suggests a lower computational cost for the inversion process due to the reduction of numerical simulations to be performed and the fast convergence of the optimization process.
△ Less
Submitted 28 January, 2022;
originally announced January 2022.
-
An outlier-resistant $κ$-generalized approach for robust physical parameter estimation
Authors:
Sérgio Luiz E. F. da Silva,
R. Silva,
Gustavo Z. dos Santos Lima,
João M. de Araújo,
Gilberto Corso
Abstract:
In this work we propose a robust methodology to mitigate the undesirable effects caused by outliers to generate reliable physical models. In this way, we formulate the inverse problems theory in the context of Kaniadakis statistical mechanics (or $κ$-statistics), in which the classical approach is a particular case. In this regard, the errors are assumed to be distributed according to a finite-var…
▽ More
In this work we propose a robust methodology to mitigate the undesirable effects caused by outliers to generate reliable physical models. In this way, we formulate the inverse problems theory in the context of Kaniadakis statistical mechanics (or $κ$-statistics), in which the classical approach is a particular case. In this regard, the errors are assumed to be distributed according to a finite-variance $κ$-generalized Gaussian distribution. Based on the probabilistic maximum-likelihood method we derive a $κ$-objective function associated with the finite-variance $κ$-Gaussian distribution. To demonstrate our proposal's outlier-resistance, we analyze the robustness properties of the $κ$-objective function with help of the so-called influence function. In this regard, we discuss the role of the entropic index ($κ$) associated with the Kaniadakis $κ$-entropy in the effectiveness in inferring physical parameters by using strongly noisy data. In this way, we consider a classical geophysical data-inverse problem in two realistic circumstances, in which the first one refers to study the sensibility of our proposal to uncertainties in the input parameters, and the second is devoted to the inversion of a seismic data set contaminated by outliers. The results reveal an optimum $κ$-value at the limit $κ\rightarrow 2/3$, which is related to the best results.
△ Less
Submitted 18 November, 2021;
originally announced November 2021.
-
Engineering entangled photons for transmission in ring-core optical fibers
Authors:
G. Cañas,
E. S. Gómez,
E. Baradit,
G. Lima,
S. P. Walborn
Abstract:
The capacity of optical communication channels can be increased by space division multiplexing in structured optical fibers. Radial core optical fibers allows for the propagation of twisted light--eigenmodes of orbital angular momentum, which have attracted considerable attention for high-dimensional quantum information. Here we study the generation of entangled photons that are tailor-made for co…
▽ More
The capacity of optical communication channels can be increased by space division multiplexing in structured optical fibers. Radial core optical fibers allows for the propagation of twisted light--eigenmodes of orbital angular momentum, which have attracted considerable attention for high-dimensional quantum information. Here we study the generation of entangled photons that are tailor-made for coupling into ring core optical fibers. We show that the coupling of photon pairs produced by parametric down-conversion can be increased by close to a factor of three by pumping the non-linear crystal with a perfect vortex mode with orbital angular momentum $\ell$, rather than a gaussian mode. Moreover, the two-photon orbital angular momentum spectrum has a nearly constant shape. This provides an interesting scenario for quantum state engineering, as pumping the crystal with a superposition of perfect vortex modes can be used in conjunction with the mode filtering properties of the ring core fiber to produce simple and interesting quantum states.
△ Less
Submitted 7 September, 2021;
originally announced September 2021.
-
Few-mode-fiber technology fine-tunes losses of quantum communication systems
Authors:
A. Alarcón,
J. Argillander,
G. Lima,
G. B. Xavier
Abstract:
A natural choice for quantum communication is to use the relative phase between two paths of a single-photon for information encoding. This method was nevertheless quickly identified as impractical over long distances and thus a modification based on single-photon time-bins has then become widely adopted. It however, introduces a fundamental loss, which increases with the dimension and that limits…
▽ More
A natural choice for quantum communication is to use the relative phase between two paths of a single-photon for information encoding. This method was nevertheless quickly identified as impractical over long distances and thus a modification based on single-photon time-bins has then become widely adopted. It however, introduces a fundamental loss, which increases with the dimension and that limits its application over long distances. Here, we are able to solve this long-standing hurdle by employing a few-mode fiber space-division multiplexing platform working with orbital angular momentum modes. In our scheme, we maintain the practicability provided by the time-bin scheme, while the quantum states are transmitted through a few-mode fiber in a configuration that does not introduce post-selection losses. We experimentally demonstrate our proposal by successfully transmitting phase-encoded single-photon states for quantum cryptography over 500 m of few-mode fiber, showing the feasibility of our scheme.
△ Less
Submitted 5 October, 2021; v1 submitted 8 March, 2021;
originally announced March 2021.
-
Optimal conditions for multiplexing information into ring-core optical fibers
Authors:
Santiago Rojas-Rojas,
Gustavo Cañas,
Gabriel Saavedra,
Esteban Sepulveda,
Stephen Walborn,
Gustavo Lima
Abstract:
In optical communications, space-division multiplexing is a promising strategy to augment the fiber network capacity. It relies on modern fiber designs that support the propagation of multiple spatial modes. One of these fibers, the ring-core fiber (RCF), is able to propagate modes that carry orbital angular momentum (OAM), and has been shown to enhance not only classical, but also quantum communi…
▽ More
In optical communications, space-division multiplexing is a promising strategy to augment the fiber network capacity. It relies on modern fiber designs that support the propagation of multiple spatial modes. One of these fibers, the ring-core fiber (RCF), is able to propagate modes that carry orbital angular momentum (OAM), and has been shown to enhance not only classical, but also quantum communication systems. Typically, the RCF spatial modes are used as orthogonal transmission channels for data streams that are coupled into the fiber using different Laguerre-Gaussian (LG) beams. Here, we study the optimal conditions to multiplex information into ring-core fibers in this scheme. We determine which are the most relevant LG beams to be considered, and how their coupling efficiency can be maximized by properly adjusting the beam width with respect to the fiber parameters. Our results show that the coupling efficiency depends upon the OAM value, and that this can limit the achievable transmission rates. In this regard, we show that LG beams are not the optimal choice to couple information into RCF. Rather, another class of OAM-carrying beam, the perfect vortex beam, allows for nearly perfect coupling efficiencies for all spatial modes supported by these fibers.
△ Less
Submitted 19 January, 2021; v1 submitted 15 January, 2021;
originally announced January 2021.
-
Maximizing Post-selected Quantum Correlations from Classical Interference in a Multi-core Fiber Beamsplitter
Authors:
J. Cariñe,
M. Asan-Srain,
G. Lima,
S. P. Walborn
Abstract:
Fourth-order interference is an information processing primitive for photonic quantum technologies. When used in conjunction with post-selection, it forms the basis of photonic controlled logic gates, entangling measurements, and can be used to produce quantum correlations. Here, using classical weak coherent states as inputs, we study fourth-order interference in novel $4 \times 4$ multi-port bea…
▽ More
Fourth-order interference is an information processing primitive for photonic quantum technologies. When used in conjunction with post-selection, it forms the basis of photonic controlled logic gates, entangling measurements, and can be used to produce quantum correlations. Here, using classical weak coherent states as inputs, we study fourth-order interference in novel $4 \times 4$ multi-port beam splitters built within multi-core optical fibers. Using two mutually incoherent weak laser pulses as inputs, we observe high-quality fourth order interference between photons from different cores, as well as self-interference of a two-photon wavepacket. In addition, we show that quantum correlations, in the form of quantum discord, can be maximized by controlling the intensity ratio between the two input weak coherent states. This should allow for the exploitation of quantum correlations in future telecommunication networks.
△ Less
Submitted 11 January, 2021;
originally announced January 2021.
-
Parameter free determination of optimum time delay
Authors:
Thiago Lima Prado,
Vandertone Santos Machado,
Gilberto Corso,
Gustavo Zampier dos Santos Lima,
Sergio Roberto Lopes
Abstract:
We show that the same maximum entropy principle applied to recurrence microstates configures a new way to properly compute the time delay necessary to correctly sample a data set. The new method retrieves results obtained using traditional methods with the advantage of being independent of any free parameter. Since all parameters are automatically set, the method is suitable for use in artificial…
▽ More
We show that the same maximum entropy principle applied to recurrence microstates configures a new way to properly compute the time delay necessary to correctly sample a data set. The new method retrieves results obtained using traditional methods with the advantage of being independent of any free parameter. Since all parameters are automatically set, the method is suitable for use in artificial (computational) intelligence algorithms, recovering correct information embedded in time series, and rationalizing the process of data acquisition since only relevant data must be collected.
△ Less
Submitted 6 October, 2020;
originally announced October 2020.
-
Polarization-independent single-photon switch based on a fiber-optical Sagnac interferometer for quantum communication networks
Authors:
A. Alarcón,
P. González,
J. Cariñe,
G. Lima,
G. B. Xavier
Abstract:
An essential component of future quantum networks is an optical switch capable of dynamically routing single-photons. Here we implement such a switch, based on a fiber-optical Sagnac interferometer design. The routing is implemented with a pair of fast electro-optical telecom phase modulators placed inside the Sagnac loop, such that each modulator acts on an orthogonal polarization component of th…
▽ More
An essential component of future quantum networks is an optical switch capable of dynamically routing single-photons. Here we implement such a switch, based on a fiber-optical Sagnac interferometer design. The routing is implemented with a pair of fast electro-optical telecom phase modulators placed inside the Sagnac loop, such that each modulator acts on an orthogonal polarization component of the single-photons, in order to yield polarization-independent capability that is crucial for several applications. We obtain an average extinction ratio of more than 19 dB between both outputs of the switch. Our experiment is built exclusively with commercial off-the-shelf components, thus allowing direct compatibility with current optical communication systems.
△ Less
Submitted 4 September, 2020;
originally announced September 2020.
-
Boosting entanglement generation in down-conversion with incoherent illumination
Authors:
Lucas Hutter,
Gustavo Lima,
Stephen P. Walborn
Abstract:
Entangled photons produced by spontaneous parametric down-conversion have been of paramount importance for our current understanding of quantum mechanics and advances in quantum information. In this process, the quantum correlations of the down-converted photons are governed by the optical properties of the pump beam illuminating the non-linear crystal. Extensively, the pump beam has been modeled…
▽ More
Entangled photons produced by spontaneous parametric down-conversion have been of paramount importance for our current understanding of quantum mechanics and advances in quantum information. In this process, the quantum correlations of the down-converted photons are governed by the optical properties of the pump beam illuminating the non-linear crystal. Extensively, the pump beam has been modeled by either coherent beams or by the well-know Gaussian-Schell model, which leads to the natural conclusion that a high degree of optical coherence is required for the generation of highly entangled states. Here, we show that when a novel class of partially coherent Gaussian pump beams is considered, a distinct type of quantum state can be generated for which the amount of entanglement increases inversely with the degree of coherence of the pump beam. This leads to highly incoherent yet highly entangled multi-photon states, which should have interesting consequences for photonic quantum information science.
△ Less
Submitted 25 June, 2020;
originally announced June 2020.
-
GeantV: Results from the prototype of concurrent vector particle transport simulation in HEP
Authors:
G. Amadio,
A. Ananya,
J. Apostolakis,
M. Bandieramonte,
S. Banerjee,
A. Bhattacharyya,
C. Bianchini,
G. Bitzes,
P. Canal,
F. Carminati,
O. Chaparro-Amaro,
G. Cosmo,
J. C. De Fine Licht,
V. Drogan,
L. Duhem,
D. Elvira,
J. Fuentes,
A. Gheata,
M. Gheata,
M. Gravey,
I. Goulas,
F. Hariri,
S. Y. Jun,
D. Konstantinov,
H. Kumawat
, et al. (17 additional authors not shown)
Abstract:
Full detector simulation was among the largest CPU consumer in all CERN experiment software stacks for the first two runs of the Large Hadron Collider (LHC). In the early 2010's, the projections were that simulation demands would scale linearly with luminosity increase, compensated only partially by an increase of computing resources. The extension of fast simulation approaches to more use cases,…
▽ More
Full detector simulation was among the largest CPU consumer in all CERN experiment software stacks for the first two runs of the Large Hadron Collider (LHC). In the early 2010's, the projections were that simulation demands would scale linearly with luminosity increase, compensated only partially by an increase of computing resources. The extension of fast simulation approaches to more use cases, covering a larger fraction of the simulation budget, is only part of the solution due to intrinsic precision limitations. The remainder corresponds to speeding-up the simulation software by several factors, which is out of reach using simple optimizations on the current code base. In this context, the GeantV R&D project was launched, aiming to redesign the legacy particle transport codes in order to make them benefit from fine-grained parallelism features such as vectorization, but also from increased code and data locality. This paper presents extensively the results and achievements of this R&D, as well as the conclusions and lessons learnt from the beta prototype.
△ Less
Submitted 16 September, 2020; v1 submitted 2 May, 2020;
originally announced May 2020.
-
Multi-core fiber integrated multi-port beamsplitters for quantum information processing
Authors:
J. Cariñe,
G. Cañas,
P. Skrzypczyk,
I. Šupić,
N. Guerrero,
T. Garcia,
L. Pereira,
M. A. S. Prosser,
G. B. Xavier,
A. Delgado,
S. P. Walborn,
D. Cavalcanti,
G. Lima
Abstract:
Multi-port beamsplitters are cornerstone devices for high-dimensional quantum information tasks, which can outperform the two-dimensional ones. Nonetheless, the fabrication of such devices has been proven to be challenging with progress only recently achieved with the advent of integrated photonics. Here, we report on the production of high-quality $N \times N$ (with $N=4,7$) multi-port beamsplitt…
▽ More
Multi-port beamsplitters are cornerstone devices for high-dimensional quantum information tasks, which can outperform the two-dimensional ones. Nonetheless, the fabrication of such devices has been proven to be challenging with progress only recently achieved with the advent of integrated photonics. Here, we report on the production of high-quality $N \times N$ (with $N=4,7$) multi-port beamsplitters based on a new scheme for manipulating multi-core optical fibers. By exploring their compatibility with optical fiber components, we create 4-dimensional quantum systems and implement the measurement-device-independent random number generation task with a programmable 4-arm interferometer operating at a 2 MHz repetition rate. Thanks to the high visibilities observed, we surpass the 1-bit limit of binary protocols and attain 1.23 bits of certified private randomness per experimental round. Our result demonstrates that fast switching, low-loss and high optical quality for high-dimensional quantum information can be simultaneously achieved with multi-core fiber technology.
△ Less
Submitted 20 May, 2020; v1 submitted 29 January, 2020;
originally announced January 2020.
-
Quantum information processing with space-division multiplexing optical fibres
Authors:
Guilherme B. Xavier,
Gustavo Lima
Abstract:
The optical fibre is an essential tool for our communication infrastructure since it is the main transmission channel for optical communications. The latest major advance in optical fibre technology is spatial division multiplexing (SDM), where new fibre designs and components establish multiple co-existing data channels based on light propagation over distinct transverse optical modes. Simultaneo…
▽ More
The optical fibre is an essential tool for our communication infrastructure since it is the main transmission channel for optical communications. The latest major advance in optical fibre technology is spatial division multiplexing (SDM), where new fibre designs and components establish multiple co-existing data channels based on light propagation over distinct transverse optical modes. Simultaneously, there have been many recent developments in the field of quantum information processing (QIP), with novel protocols and devices in areas such as computing, communication and metrology. Here, we review recent works implementing QIP protocols with SDM optical fibres, and discuss new possibilities for manipulating quantum systems based on this technology.
△ Less
Submitted 22 January, 2020; v1 submitted 29 May, 2019;
originally announced May 2019.
-
Parameter-free quantification of stochastic and chaotic signals
Authors:
Sergio Roberto Lopes,
Thiago de Lima Prado,
Gilberto Corso,
Gustavo Zampier dos Santos Lima,
Jurgen Kurths
Abstract:
Recurrence entropy $(\cal S)$ is a novel time series complexity quantifier based on recurrence microstates. Here we show that $\mathsf{max}(\cal S)$ is a \textit{parameter-free} quantifier of time correlation of stochastic and chaotic signals, at the same time that it evaluates property changes of the probability distribution function (PDF) of the entire data set. $\mathsf{max}(\cal S)$ can distin…
▽ More
Recurrence entropy $(\cal S)$ is a novel time series complexity quantifier based on recurrence microstates. Here we show that $\mathsf{max}(\cal S)$ is a \textit{parameter-free} quantifier of time correlation of stochastic and chaotic signals, at the same time that it evaluates property changes of the probability distribution function (PDF) of the entire data set. $\mathsf{max}(\cal S)$ can distinguish distinct temporal correlations of stochastic signals following a power-law spectrum, $\displaystyle P(f) \propto 1/f^α$ even when shuffled versions of the signals are used. Such behavior is related to its ability to quantify distinct subsets embedded in a time series. Applied to a deterministic system, the method brings new evidence about attractor properties and the degree of chaoticity. The development of a new parameter-free quantifier of stochastic and chaotic time series opens new perspectives to stochastic data and deterministic time series analyses and may find applications in many areas of science.
△ Less
Submitted 6 May, 2019;
originally announced May 2019.
-
Experimental quantum tomography assisted by multiply symmetric states in higher dimensions
Authors:
D. Martínez,
M. A. Solís-Prosser,
G. Cañas,
O. Jiménez,
A. Delgado,
G. Lima
Abstract:
High-dimensional quantum information processing has become a mature field of research with several different approaches being adopted for the encoding of $D$-dimensional quantum systems. Such progress has fueled the search of reliable quantum tomographic methods aiming for the characterization of these systems, being most of these methods specifically designed for a given scenario. Here, we report…
▽ More
High-dimensional quantum information processing has become a mature field of research with several different approaches being adopted for the encoding of $D$-dimensional quantum systems. Such progress has fueled the search of reliable quantum tomographic methods aiming for the characterization of these systems, being most of these methods specifically designed for a given scenario. Here, we report on a new tomographic method based on multiply symmetric states and on experimental investigations to study its performance in higher dimensions. Unlike other methods, it is guaranteed to exist in any dimension and provides a significant reduction in the number of measurement outcomes when compared to standard quantum tomography. Furthermore, in the case of odd dimensions, the method requires the least possible number of measurement outcomes. In our experiment we adopt the technique where high-dimensional quantum states are encoded using the linear transverse momentum of single photons and are controlled by spatial light modulators. Our results show that fidelities of $0.984\pm0.009$ with ensemble sizes of only $1.5\times10^5$ photons in dimension $D=15$ can be obtained in typical laboratory conditions, thus showing its practicability in higher dimensions.
△ Less
Submitted 21 August, 2018;
originally announced August 2018.
-
HEP Software Foundation Community White Paper Working Group - Detector Simulation
Authors:
HEP Software Foundation,
:,
J Apostolakis,
M Asai,
S Banerjee,
R Bianchi,
P Canal,
R Cenci,
J Chapman,
G Corti,
G Cosmo,
S Easo,
L de Oliveira,
A Dotti,
V Elvira,
S Farrell,
L Fields,
K Genser,
A Gheata,
M Gheata,
J Harvey,
F Hariri,
R Hatcher,
K Herner,
M Hildreth
, et al. (40 additional authors not shown)
Abstract:
A working group on detector simulation was formed as part of the high-energy physics (HEP) Software Foundation's initiative to prepare a Community White Paper that describes the main software challenges and opportunities to be faced in the HEP field over the next decade. The working group met over a period of several months in order to review the current status of the Full and Fast simulation appl…
▽ More
A working group on detector simulation was formed as part of the high-energy physics (HEP) Software Foundation's initiative to prepare a Community White Paper that describes the main software challenges and opportunities to be faced in the HEP field over the next decade. The working group met over a period of several months in order to review the current status of the Full and Fast simulation applications of HEP experiments and the improvements that will need to be made in order to meet the goals of future HEP experimental programmes. The scope of the topics covered includes the main components of a HEP simulation application, such as MC truth handling, geometry modeling, particle propagation in materials and fields, physics modeling of the interactions of particles with matter, the treatment of pileup and other backgrounds, as well as signal processing and digitisation. The resulting work programme described in this document focuses on the need to improve both the software performance and the physics of detector simulation. The goals are to increase the accuracy of the physics models and expand their applicability to future physics programmes, while achieving large factors in computing performance gains consistent with projections on available computing resources.
△ Less
Submitted 12 March, 2018;
originally announced March 2018.
-
A Roadmap for HEP Software and Computing R&D for the 2020s
Authors:
Johannes Albrecht,
Antonio Augusto Alves Jr,
Guilherme Amadio,
Giuseppe Andronico,
Nguyen Anh-Ky,
Laurent Aphecetche,
John Apostolakis,
Makoto Asai,
Luca Atzori,
Marian Babik,
Giuseppe Bagliesi,
Marilena Bandieramonte,
Sunanda Banerjee,
Martin Barisits,
Lothar A. T. Bauerdick,
Stefano Belforte,
Douglas Benjamin,
Catrin Bernius,
Wahid Bhimji,
Riccardo Maria Bianchi,
Ian Bird,
Catherine Biscarat,
Jakob Blomer,
Kenneth Bloom,
Tommaso Boccali
, et al. (285 additional authors not shown)
Abstract:
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for…
▽ More
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for the HL-LHC in particular, it is critical that all of the collaborating stakeholders agree on the software goals and priorities, and that the efforts complement each other. In this spirit, this white paper describes the R&D activities required to prepare for this software upgrade.
△ Less
Submitted 19 December, 2018; v1 submitted 18 December, 2017;
originally announced December 2017.
-
A novel entropy recurrence quantification analysis
Authors:
G. Corso,
T. L. Prado,
G. Z. dos S. Lima,
S. R. Lopes
Abstract:
The growing study of time series, especially those related to nonlinear systems, has challenged the methodologies to characterize and classify dynamical structures of a signal. Here we conceive a new diagnostic tool for time series based on the concept of information entropy, in which the probabilities are associated to microstates defined from the recurrence phase space. Recurrence properties can…
▽ More
The growing study of time series, especially those related to nonlinear systems, has challenged the methodologies to characterize and classify dynamical structures of a signal. Here we conceive a new diagnostic tool for time series based on the concept of information entropy, in which the probabilities are associated to microstates defined from the recurrence phase space. Recurrence properties can properly be studied using recurrence plots, a methodology based on binary matrices where trajec- tories in phase space of dynamical systems are evaluated against other embedded trajectory. Our novel entropy methodology has several advantages compared to the traditional recurrence entropy defined in the literature, namely, the correct evaluation of the chaoticity level of the signal, the weak dependence on parameters, correct evaluation of periodic time series properties and more sensitivity to noise level of time series. Furthermore, the new entropy quantifier developed in this manuscript also fixes inconsistent results of the traditional recurrence entropy concept, reproducing classical results with novel insights.
△ Less
Submitted 4 July, 2017;
originally announced July 2017.
-
Postselection-Loophole-Free Bell Test Over an Installed Optical Fiber Network
Authors:
Gonzalo Carvacho,
Jaime Cariñe,
Gabriel Saavedra,
Álvaro Cuevas,
Jorge Fuenzalida,
Felipe Toledo,
Miguel Figueroa,
Adán Cabello,
Jan-Åke Larsson,
Paolo Mataloni,
Gustavo Lima,
Guilherme B. Xavier
Abstract:
Device-independent (DI) quantum communication will require a loophole-free violation of Bell inequalities. In typical scenarios where line-of-sight between the communicating parties is not available, it is convenient to use energy-time entangled photons due to intrinsic robustness while propagating over optical fibers. Here we show an energy-time Clauser-Horne-Shimony-Holt Bell inequality violatio…
▽ More
Device-independent (DI) quantum communication will require a loophole-free violation of Bell inequalities. In typical scenarios where line-of-sight between the communicating parties is not available, it is convenient to use energy-time entangled photons due to intrinsic robustness while propagating over optical fibers. Here we show an energy-time Clauser-Horne-Shimony-Holt Bell inequality violation with two parties separated by 3.7 km over the deployed optical fiber network belonging to the University of Concepción in Chile. Remarkably, this is the first Bell violation with spatially separated parties that is free of the post-selection loophole, which affected all previous in-field long-distance energy-time experiments. Our work takes a further step towards a fiber-based loophole-free Bell test, which is highly desired for secure quantum communication due to the widespread existing telecommunication infrastructure.
△ Less
Submitted 14 July, 2015; v1 submitted 25 March, 2015;
originally announced March 2015.
-
Pion and proton showers in the CALICE scintillator-steel analogue hadron calorimeter
Authors:
The CALICE Collaboration,
B. Bilki,
J. Repond,
L. Xia,
G. Eigen,
M. A. Thomson,
D. R. Ward,
D. Benchekroun,
A. Hoummada,
Y. Khoulaki,
S. Chang,
A. Khan,
D. H. Kim,
D. J. Kong,
Y. D. Oh,
G. C. Blazey,
A. Dyshkant,
K. Francis,
J. G. R. Lima,
R. Salcido,
V. Zutshi,
F. Salvatore,
K. Kawagoe,
Y. Miyazaki,
Y. Sudo
, et al. (147 additional authors not shown)
Abstract:
Showers produced by positive hadrons in the highly granular CALICE scintillator-steel analogue hadron calorimeter were studied. The experimental data were collected at CERN and FNAL for single particles with initial momenta from 10 to 80 GeV/c. The calorimeter response and resolution and spatial characteristics of shower development for proton- and pion-induced showers for test beam data and simul…
▽ More
Showers produced by positive hadrons in the highly granular CALICE scintillator-steel analogue hadron calorimeter were studied. The experimental data were collected at CERN and FNAL for single particles with initial momenta from 10 to 80 GeV/c. The calorimeter response and resolution and spatial characteristics of shower development for proton- and pion-induced showers for test beam data and simulations using Geant4 version 9.6 are compared.
△ Less
Submitted 15 March, 2015; v1 submitted 8 December, 2014;
originally announced December 2014.
-
Testing Hadronic Interaction Models using a Highly Granular Silicon-Tungsten Calorimeter
Authors:
The CALICE Collaboration,
B. Bilki,
J. Repond,
J. Schlereth,
L. Xia,
Z. Deng,
Y. Li,
Y. Wang,
Q. Yue,
Z. Yang,
G. Eigen,
Y. Mikami,
T. Price,
N. K. Watson,
M. A. Thomson,
D. R. Ward,
D. Benchekroun,
A. Hoummada,
Y. Khoulaki,
C. Cârloganu,
S. Chang,
A. Khan,
D. H. Kim,
D. J. Kong,
Y. D. Oh
, et al. (127 additional authors not shown)
Abstract:
A detailed study of hadronic interactions is presented using data recorded with the highly granular CALICE silicon-tungsten electromagnetic calorimeter. Approximately 350,000 selected negatively charged pion events at energies between 2 and 10 GeV have been studied. The predictions of several physics models available within the Geant4 simulation tool kit are compared to this data. A reasonable ove…
▽ More
A detailed study of hadronic interactions is presented using data recorded with the highly granular CALICE silicon-tungsten electromagnetic calorimeter. Approximately 350,000 selected negatively charged pion events at energies between 2 and 10 GeV have been studied. The predictions of several physics models available within the Geant4 simulation tool kit are compared to this data. A reasonable overall description of the data is observed; the Monte Carlo predictions are within 20% of the data, and for many observables much closer. The largest quantitative discrepancies are found in the longitudinal and transverse distributions of reconstructed energy.
△ Less
Submitted 8 May, 2015; v1 submitted 26 November, 2014;
originally announced November 2014.
-
Analytical model for waveguide light propagation and applications
Authors:
Santiago Rojas Rojas,
Luis Morales-Inostroza,
Uta Naether,
Guilherme B. Xavier,
Stefan Nolte,
Alexander Szameit,
Rodrigo A. Vicencio,
Gustavo Lima,
Aldo Delgado
Abstract:
We study the polarization properties of elliptical femtosecond-laser-written waveguides arrays. A new analytical model is presented to explain the asymmetry of the spatial transverse profiles of linearly polarized modes in these waveguides. This asymmetry produces a polarization dependent coupling coefficient, between adjacent waveguides, which strongly affects the propagation of light in a lattic…
▽ More
We study the polarization properties of elliptical femtosecond-laser-written waveguides arrays. A new analytical model is presented to explain the asymmetry of the spatial transverse profiles of linearly polarized modes in these waveguides. This asymmetry produces a polarization dependent coupling coefficient, between adjacent waveguides, which strongly affects the propagation of light in a lattice. Our analysis explains how this effect can be exploited to tune the final intensity distribution of light propagated through the array, and links the properties of a polarizing beam splitter in integrated optical circuits to the geometry of the waveguides.
△ Less
Submitted 15 December, 2014; v1 submitted 8 September, 2014;
originally announced September 2014.
-
Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter
Authors:
CALICE Collaboration,
K. Francis,
J. Repond,
J. Schlereth,
J. Smith,
L. Xia,
E. Baldolemar,
J. Li,
S. T. Park,
M. Sosebee,
A. P. White,
J. Yu,
G. Eigen,
Y. Mikami,
N. K. Watson,
M. A. Thomson,
D. R. Ward,
D. Benchekroun,
A. Hoummada,
Y. Khoulaki,
J. Apostolakis,
A. Dotti,
G. Folger,
V. Ivantchenko,
A. Ribon
, et al. (169 additional authors not shown)
Abstract:
A first prototype of a scintillator strip-based electromagnetic calorimeter was built, consisting of 26 layers of tungsten absorber plates interleaved with planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's performance is presented in terms of the linearity and resolution of the energy measur…
▽ More
A first prototype of a scintillator strip-based electromagnetic calorimeter was built, consisting of 26 layers of tungsten absorber plates interleaved with planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's performance is presented in terms of the linearity and resolution of the energy measurement. These results represent an important milestone in the development of highly granular calorimeters using scintillator strip technology. This technology is being developed for a future linear collider experiment, aiming at the precise measurement of jet energies using particle flow techniques.
△ Less
Submitted 11 June, 2014; v1 submitted 15 November, 2013;
originally announced November 2013.
-
Shower development of particles with momenta from 1 to 10 GeV in the CALICE Scintillator-Tungsten HCAL
Authors:
C. Adloff,
J. -J. Blaising,
M. Chefdeville,
C. Drancourt,
R. Gaglione,
N. Geffroy,
Y. Karyotakis,
I. Koletsou,
J. Prast,
G. Vouters,
J. Repond,
J. Schlereth,
J. Smith,
L. Xia,
E. Baldolemar,
J. Li,
S. T. Park,
M. Sosebee,
A. P. White,
J. Yu,
G. Eigen,
M. A. Thomson,
D. R. Ward,
D. Benchekroun,
A. Hoummada
, et al. (194 additional authors not shown)
Abstract:
Lepton colliders are considered as options to complement and to extend the physics programme at the Large Hadron Collider. The Compact Linear Collider (CLIC) is an $e^+e^-$ collider under development aiming at centre-of-mass energies of up to 3 TeV. For experiments at CLIC, a hadron sampling calorimeter with tungsten absorber is proposed. Such a calorimeter provides sufficient depth to contain hig…
▽ More
Lepton colliders are considered as options to complement and to extend the physics programme at the Large Hadron Collider. The Compact Linear Collider (CLIC) is an $e^+e^-$ collider under development aiming at centre-of-mass energies of up to 3 TeV. For experiments at CLIC, a hadron sampling calorimeter with tungsten absorber is proposed. Such a calorimeter provides sufficient depth to contain high-energy showers, while allowing a compact size for the surrounding solenoid.
A fine-grained calorimeter prototype with tungsten absorber plates and scintillator tiles read out by silicon photomultipliers was built and exposed to particle beams at CERN. Results obtained with electrons, pions and protons of momenta up to 10 GeV are presented in terms of energy resolution and shower shape studies. The results are compared with several GEANT4 simulation models in order to assess the reliability of the Monte Carlo predictions relevant for a future experiment at CLIC.
△ Less
Submitted 13 January, 2014; v1 submitted 14 November, 2013;
originally announced November 2013.
-
Validation of GEANT4 Monte Carlo Models with a Highly Granular Scintillator-Steel Hadron Calorimeter
Authors:
C. Adloff,
J. Blaha,
J. -J. Blaising,
C. Drancourt,
A. Espargilière,
R. Gaglione,
N. Geffroy,
Y. Karyotakis,
J. Prast,
G. Vouters,
K. Francis,
J. Repond,
J. Schlereth,
J. Smith,
L. Xia,
E. Baldolemar,
J. Li,
S. T. Park,
M. Sosebee,
A. P. White,
J. Yu,
T. Buanes,
G. Eigen,
Y. Mikami,
N. K. Watson
, et al. (148 additional authors not shown)
Abstract:
Calorimeters with a high granularity are a fundamental requirement of the Particle Flow paradigm. This paper focuses on the prototype of a hadron calorimeter with analog readout, consisting of thirty-eight scintillator layers alternating with steel absorber planes. The scintillator plates are finely segmented into tiles individually read out via Silicon Photomultipliers. The presented results are…
▽ More
Calorimeters with a high granularity are a fundamental requirement of the Particle Flow paradigm. This paper focuses on the prototype of a hadron calorimeter with analog readout, consisting of thirty-eight scintillator layers alternating with steel absorber planes. The scintillator plates are finely segmented into tiles individually read out via Silicon Photomultipliers. The presented results are based on data collected with pion beams in the energy range from 8GeV to 100GeV. The fine segmentation of the sensitive layers and the high sampling frequency allow for an excellent reconstruction of the spatial development of hadronic showers. A comparison between data and Monte Carlo simulations is presented, concerning both the longitudinal and lateral development of hadronic showers and the global response of the calorimeter. The performance of several GEANT4 physics lists with respect to these observables is evaluated.
△ Less
Submitted 15 June, 2014; v1 submitted 13 June, 2013;
originally announced June 2013.
-
Track segments in hadronic showers in a highly granular scintillator-steel hadron calorimeter
Authors:
CALICE Collaboration,
C. Adloff,
J. -J. Blaising,
M. Chefdeville,
C. Drancourt,
R. Gaglione,
N. Geffroy,
Y. Karyotakis,
I. Koletsou,
J. Prast,
G. Vouters,
K. Francis,
J. Repond,
J. Schlereth,
J. Smith,
L. Xia,
E. Baldolemar,
J. Li,
S. T. Park,
M. Sosebee,
A. P. White,
J. Yu,
G. Eigen,
Y. Mikami,
N. K. Watson
, et al. (184 additional authors not shown)
Abstract:
We investigate the three dimensional substructure of hadronic showers in the CALICE scintillator-steel hadronic calorimeter. The high granularity of the detector is used to find track segments of minimum ionising particles within hadronic showers, providing sensitivity to the spatial structure and the details of secondary particle production in hadronic cascades. The multiplicity, length and angul…
▽ More
We investigate the three dimensional substructure of hadronic showers in the CALICE scintillator-steel hadronic calorimeter. The high granularity of the detector is used to find track segments of minimum ionising particles within hadronic showers, providing sensitivity to the spatial structure and the details of secondary particle production in hadronic cascades. The multiplicity, length and angular distribution of identified track segments are compared to GEANT4 simulations with several different shower models. Track segments also provide the possibility for in-situ calibration of highly granular calorimeters.
△ Less
Submitted 29 July, 2013; v1 submitted 30 May, 2013;
originally announced May 2013.
-
Harada-Tsutsui Gauge Recovery Procedure: From Abelian Gauge Anomalies to the Stueckelberg Mechanism
Authors:
Gabriel Di Lemos Santiago Lima
Abstract:
Revisiting a path-integral procedure of recovering gauge invariance from anomalous effective actions developed by Harada and Tsutsui, it is shown that there are two ways to achieve gauge symmetry: one already presented by the authors, which is shown to preserve the anomaly in the sense of standard conservation law, and another one which is anomaly-free, preserving current conservation. It is also…
▽ More
Revisiting a path-integral procedure of recovering gauge invariance from anomalous effective actions developed by Harada and Tsutsui, it is shown that there are two ways to achieve gauge symmetry: one already presented by the authors, which is shown to preserve the anomaly in the sense of standard conservation law, and another one which is anomaly-free, preserving current conservation. It is also shown that the aplication of Harada-Tsutsui technique to other models which are not anomalous but do not exhibit gauge invariance allows the identification of the gauge invariant formulation of the Proca model, also done by the referred authors, with the Stueckelberg model, leading to the interpretation of the gauge invariant map as a generalization of the Stueckelberg mechanism.
△ Less
Submitted 29 May, 2013; v1 submitted 18 April, 2013;
originally announced April 2013.
-
Computational evaluation of convection schemes in fluid dynamics problems
Authors:
Valdemir Garcia Ferreira,
Giseli Aparecida Braz de Lima,
Laís Corrêa,
Miguel Antonio Caro Candezano,
Eliandro Rodrigues Cirilo,
Paulo Laerte Natti,
Neyva Maria Lopes Romeiro
Abstract:
This article provides a computational evaluation of the popular high resolution upwind WACEB, CUBISTA and ADBQUICKEST schemes for solving non-linear fluid dynamics problems. By using the finite difference methodology, the schemes are analyzed and implemented in the context of normalized variables of Leonard. In order to access the performance of the schemes, Riemann problems for 1D Burgers, Euler…
▽ More
This article provides a computational evaluation of the popular high resolution upwind WACEB, CUBISTA and ADBQUICKEST schemes for solving non-linear fluid dynamics problems. By using the finite difference methodology, the schemes are analyzed and implemented in the context of normalized variables of Leonard. In order to access the performance of the schemes, Riemann problems for 1D Burgers, Euler and shallow water equations are considered. From the numerical results, the schemes are ranked according to their performance in solving these non-linear equations. The best scheme is then applied in the numerical simulation of tridimensional incompressible moving free surface flows.
△ Less
Submitted 2 April, 2013;
originally announced April 2013.
-
Hadronic energy resolution of a highly granular scintillator-steel hadron calorimeter using software compensation techniques
Authors:
CALICE Collaboration,
C. Adloff,
J. Blaha,
J. -J. Blaising,
C. Drancourt,
A. Espargilière,
R. Gaglione,
N. Geffroy,
Y. Karyotakis,
J. Prast,
G. Vouters,
K. Francis,
J. Repond,
J. Smith,
L. Xia,
E. Baldolemar,
J. Li,
S. T. Park,
M. Sosebee,
A. P. White,
J. Yu,
T. Buanes,
G. Eigen,
Y. Mikami,
N. K. Watson
, et al. (142 additional authors not shown)
Abstract:
The energy resolution of a highly granular 1 m3 analogue scintillator-steel hadronic calorimeter is studied using charged pions with energies from 10 GeV to 80 GeV at the CERN SPS. The energy resolution for single hadrons is determined to be approximately 58%/sqrt(E/GeV}. This resolution is improved to approximately 45%/sqrt(E/GeV) with software compensation techniques. These techniques take advan…
▽ More
The energy resolution of a highly granular 1 m3 analogue scintillator-steel hadronic calorimeter is studied using charged pions with energies from 10 GeV to 80 GeV at the CERN SPS. The energy resolution for single hadrons is determined to be approximately 58%/sqrt(E/GeV}. This resolution is improved to approximately 45%/sqrt(E/GeV) with software compensation techniques. These techniques take advantage of the event-by-event information about the substructure of hadronic showers which is provided by the imaging capabilities of the calorimeter. The energy reconstruction is improved either with corrections based on the local energy density or by applying a single correction factor to the event energy sum derived from a global measure of the shower energy density. The application of the compensation algorithms to Geant4 simulations yield resolution improvements comparable to those observed for real data.
△ Less
Submitted 27 September, 2012; v1 submitted 17 July, 2012;
originally announced July 2012.
-
Defocusing microscopy with an arbitrary size for the aperture of the objective lens
Authors:
Ivan F. Santos,
W. A. T. Nogueira,
S. Etcheverry,
C. Saavedra,
S. pádua,
G. Lima
Abstract:
The theoretical approach to describe the defocusing microscopy technique by U. Agero et al. [Phys. Rev. E {\bf 67}, 051904 (2003)] assumes that the size of the objective lens aperture is infinite. This treatment gives that the intensity at the image plane depends on the laplacian of the phase introduced in the field by a pure phase object. In the present paper, we consider an arbitrary size for th…
▽ More
The theoretical approach to describe the defocusing microscopy technique by U. Agero et al. [Phys. Rev. E {\bf 67}, 051904 (2003)] assumes that the size of the objective lens aperture is infinite. This treatment gives that the intensity at the image plane depends on the laplacian of the phase introduced in the field by a pure phase object. In the present paper, we consider an arbitrary size for the aperture of the objective lens and we conclude that the intensity at the image plane depends also on the gradient of the phase introduced by the object and the phase itself. In this case, even an object that introduces only linear variations in the phase can be detected. Furthermore, we show that the contrast of the image of the phase object increases with the use of smaller objective apertures.
△ Less
Submitted 3 January, 2012;
originally announced January 2012.
-
Electromagnetic response of a highly granular hadronic calorimeter
Authors:
C. Adloff,
J. Blaha,
J. -J. Blaising,
C. Drancourt,
A. Espargilière,
R. Gaglione,
N. Geffroy,
Y. Karyotakis,
J. Prast,
G. Vouters,
K. Francis,
J. Repond,
J. Smith,
L. Xia,
E. Baldolemar,
J. Li,
S. T. Park,
M. Sosebee,
A. P. White,
J. Yu,
Y. Mikami,
N. K. Watson T. Goto,
G. Mavromanolakis,
M. A. Thomson,
D. R. Ward W. Yan
, et al. (142 additional authors not shown)
Abstract:
The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the hadronic calorimeter, one option is a highly granular sampling calorimeter with steel as absorber and scintillator layers as active material. High granularity is obtained by segmenting the scintillator into small tiles individuall…
▽ More
The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the hadronic calorimeter, one option is a highly granular sampling calorimeter with steel as absorber and scintillator layers as active material. High granularity is obtained by segmenting the scintillator into small tiles individually read out via silicon photo-multipliers (SiPM).
A prototype has been built, consisting of thirty-eight sensitive layers, segmented into about eight thousand channels. In 2007 the prototype was exposed to positrons and hadrons using the CERN SPS beam, covering a wide range of beam energies and incidence angles. The challenge of cell equalization and calibration of such a large number of channels is best validated using electromagnetic processes.
The response of the prototype steel-scintillator calorimeter, including linearity and uniformity, to electrons is investigated and described.
△ Less
Submitted 8 June, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
Study of the interactions of pions in the CALICE silicon-tungsten calorimeter prototype
Authors:
C. Adloff,
Y. Karyotakis,
J. Repond,
J. Yu,
G. Eigen,
Y. Mikami,
N. K. Watson,
J. A. Wilson,
T. Goto,
G. Mavromanolakis,
M. A. Thomson,
D. R. Ward,
W. Yan,
D. Benchekroun,
A. Hoummada,
Y. Khoulaki,
J. Apostolakis,
A. Ribon,
V. Uzhinskiy,
M. Benyamna,
C. Cârloganu,
F. Fehr,
P. Gay,
G. C. Blazey,
D. Chakraborty
, et al. (133 additional authors not shown)
Abstract:
A prototype silicon-tungsten electromagnetic calorimeter for an ILC detector was tested in 2007 at the CERN SPS test beam. Data were collected with electron and hadron beams in the energy range 8 to 80 GeV. The analysis described here focuses on the interactions of pions in the calorimeter. One of the main objectives of the CALICE program is to validate the Monte Carlo tools available for the…
▽ More
A prototype silicon-tungsten electromagnetic calorimeter for an ILC detector was tested in 2007 at the CERN SPS test beam. Data were collected with electron and hadron beams in the energy range 8 to 80 GeV. The analysis described here focuses on the interactions of pions in the calorimeter. One of the main objectives of the CALICE program is to validate the Monte Carlo tools available for the design of a full-sized detector. The interactions of pions in the Si-W calorimeter are therefore confronted with the predictions of various physical models implemented in the GEANT4 simulation framework.
△ Less
Submitted 28 April, 2010;
originally announced April 2010.
-
Construction and Commissioning of the CALICE Analog Hadron Calorimeter Prototype
Authors:
C. Adloff,
Y. Karyotakis,
J. Repond,
A. Brandt,
H. Brown,
K. De,
C. Medina,
J. Smith,
J. Li,
M. Sosebee,
A. White,
J. Yu,
T. Buanes,
G. Eigen,
Y. Mikami,
O. Miller,
N. K. Watson,
J. A. Wilson,
T. Goto,
G. Mavromanolakis,
M. A. Thomson,
D. R. Ward,
W. Yan,
D. Benchekroun,
A. Hoummada
, et al. (205 additional authors not shown)
Abstract:
An analog hadron calorimeter (AHCAL) prototype of 5.3 nuclear interaction lengths thickness has been constructed by members of the CALICE Collaboration. The AHCAL prototype consists of a 38-layer sandwich structure of steel plates and highly-segmented scintillator tiles that are read out by wavelength-shifting fibers coupled to SiPMs. The signal is amplified and shaped with a custom-designed ASIC.…
▽ More
An analog hadron calorimeter (AHCAL) prototype of 5.3 nuclear interaction lengths thickness has been constructed by members of the CALICE Collaboration. The AHCAL prototype consists of a 38-layer sandwich structure of steel plates and highly-segmented scintillator tiles that are read out by wavelength-shifting fibers coupled to SiPMs. The signal is amplified and shaped with a custom-designed ASIC. A calibration/monitoring system based on LED light was developed to monitor the SiPM gain and to measure the full SiPM response curve in order to correct for non-linearity. Ultimately, the physics goals are the study of hadron shower shapes and testing the concept of particle flow. The technical goal consists of measuring the performance and reliability of 7608 SiPMs. The AHCAL was commissioned in test beams at DESY and CERN. The entire prototype was completed in 2007 and recorded hadron showers, electron showers and muons at different energies and incident angles in test beams at CERN and Fermilab.
△ Less
Submitted 12 March, 2010;
originally announced March 2010.
-
Design and Electronics Commissioning of the Physics Prototype of a Si-W Electromagnetic Calorimeter for the International Linear Collider
Authors:
CALICE Collaboration,
J. Repond,
J. Yu,
C. M. Hawkes,
Y. Mikami,
O. Miller,
N. K. Watson,
J. A. Wilson,
G. Mavromanolakis,
M. A. Thomson,
D. R. Ward,
W. Yan,
F. Badaud,
D. Boumediene,
C. Carloganu,
R. Cornat,
P. Gay,
Ph. Gris,
S. Manen,
F. Morisseau,
L. Royer,
G. C. Blazey,
D. Chakraborty,
A. Dyshkant,
K. Francis
, et al. (92 additional authors not shown)
Abstract:
The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the electromagnetic calorimeter, the current baseline choice is a high granularity sampling calorimeter with tungsten as absorber and silicon detectors as sensitive material. A ``physics prototype'' has been constructed, consisting…
▽ More
The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the electromagnetic calorimeter, the current baseline choice is a high granularity sampling calorimeter with tungsten as absorber and silicon detectors as sensitive material. A ``physics prototype'' has been constructed, consisting of thirty sensitive layers. Each layer has an active area of 18x18 cm2 and a pad size of 1x1 cm2. The absorber thickness totals 24 radiation lengths. It has been exposed in 2006 and 2007 to electron and hadron beams at the DESY and CERN beam test facilities, using a wide range of beam energies and incidence angles. In this paper, the prototype and the data acquisition chain are described and a summary of the data taken in the 2006 beam tests is presented. The methods used to subtract the pedestals and calibrate the detector are detailed. The signal-over-noise ratio has been measured at 7.63 +/- 0.01. Some electronics features have been observed; these lead to coherent noise and crosstalk between pads, and also crosstalk between sensitive and passive areas. The performance achieved in terms of uniformity and stability is presented.
△ Less
Submitted 5 August, 2008; v1 submitted 29 May, 2008;
originally announced May 2008.
-
LCDG4 and DigiSim - Simulation activities at NICADD/NIU
Authors:
D. Beznosko,
G. Blazey,
D. Chakraborty,
A. Dyshkant,
K. Francis,
D. Kubik,
J. G. R. Lima,
J. McCormick,
R. McIntosh,
V. Rykalin,
V. Zutshi
Abstract:
We present two software packages developed to support detector R&D studies for the International Linear Collider. LCDG4 is a full-detector simulator that provides energy deposits from particles traversing the sensitive volumes of the detector. It has been extensively used within the American ILC community, providing data for algorithm development and detector optimization studies. DigiSim models…
▽ More
We present two software packages developed to support detector R&D studies for the International Linear Collider. LCDG4 is a full-detector simulator that provides energy deposits from particles traversing the sensitive volumes of the detector. It has been extensively used within the American ILC community, providing data for algorithm development and detector optimization studies. DigiSim models real-life digitization effects, converting the idealized response into simulated detector readout. It has many useful features to improve the realism in modeling detector response. The main characteristics of these two complementary packages are discussed.
△ Less
Submitted 28 July, 2005;
originally announced July 2005.
