Showing 1–50 of 214 results for author: Lin, H

Polarization-controlled non-Hermitian metasurfaces for ultra-sensitive terahertz sensing

Authors: Xintong Shi, Hai Lin, Tingting Liu, Yun Shen, Rongxin Tang, Le Li, Junyi Zhang, Yanjie Wu, Shouxin Duan, Chenhui Zhao, Shuyuan Xiao

Abstract: Exceptional points (EPs), where eigenvalues and eigenstates coalesce, offer significant advantages in sensor design. However, the extreme sensitivity near EPs poses significant challenges due to fabrication errors and noises, which degrade sensing performance. To address this, we introduce a novel approach leveraging the polarization degree of freedom to achieve controllable EPs. By expressing tun… ▽ More Exceptional points (EPs), where eigenvalues and eigenstates coalesce, offer significant advantages in sensor design. However, the extreme sensitivity near EPs poses significant challenges due to fabrication errors and noises, which degrade sensing performance. To address this, we introduce a novel approach leveraging the polarization degree of freedom to achieve controllable EPs. By expressing tunable polarization as equivalent gain, we establish a direct relation between the polarization of the incident light and the phase of the coupled system, and achieve the polarization-controlled singularity even post-fabrication. The polarization angle can be utilized as a sensing index, which enables indirect and accurate measurement near the EPs. The theoretical approach is experimentally validated using a general design of THz non-Hermitian metasurface sensors. Our results indicate that this method enhances robustness and sensitivity, opening new avenues for practical applications in ultra-sensitive sensing. △ Less

Submitted 1 August, 2024; originally announced August 2024.

Comments: 16 pages 3 figures, 2 tables

The DAMIC-M Low Background Chamber

Authors: I. Arnquist, N. Avalos, P. Bailly, D. Baxter, X. Bertou, M. Bogdan, C. Bourgeois, J. Brandt, A. Cadiou, N. Castello-Mor, A. E. Chavarria, M. Conde, J. Cuevas-Zepeda, A. Dastgheibi-Fard, C. De Dominicis, O. Deligny, R. Desani, M. Dhellot, J. Duarte-Campderros, E. Estrada, D. Florin, N. Gadola, R. Gaior, E. -L. Gkougkousis, J. Gonzalez Sanchez , et al. (45 additional authors not shown)

Abstract: The DArk Matter In CCDs at Modane (DAMIC-M) experiment is designed to search for light dark matter (m$_χ$<10\,GeV/c$^2$) at the Laboratoire Souterrain de Modane (LSM) in France. DAMIC-M will use skipper charge-coupled devices (CCDs) as a kg-scale active detector target. Its single-electron resolution will enable eV-scale energy thresholds and thus world-leading sensitivity to a range of hidden sec… ▽ More The DArk Matter In CCDs at Modane (DAMIC-M) experiment is designed to search for light dark matter (m$_χ$<10\,GeV/c$^2$) at the Laboratoire Souterrain de Modane (LSM) in France. DAMIC-M will use skipper charge-coupled devices (CCDs) as a kg-scale active detector target. Its single-electron resolution will enable eV-scale energy thresholds and thus world-leading sensitivity to a range of hidden sector dark matter candidates. A DAMIC-M prototype, the Low Background Chamber (LBC), has been taking data at LSM since 2022. The LBC provides a low-background environment, which has been used to characterize skipper CCDs, study dark current, and measure radiopurity of materials planned for DAMIC-M. It also allows testing of various subsystems like readout electronics, data acquisition software, and slow control. This paper describes the technical design and performance of the LBC. △ Less

Submitted 25 July, 2024; originally announced July 2024.

Harmonizing Material Quantity and Terahertz Wave Interference Shielding Efficiency with Metallic Borophene Nanosheets

Authors: Haojian Lin, Ximiao Wang, Zhaolong Cao, Hongjia Zhu, Jiahao Wu, Runze Zhan, Ningsheng Xu, Shaozhi Deng, Huanjun Chen, Fei Liu

Abstract: Materials with electromagnetic interference (EMI) shielding in the terahertz (THz) regime, while minimizing the quantity used, are highly demanded for future information communication, healthcare and mineral resource exploration applications. Currently, there is often a trade-off between the amount of material used and the absolute EMI shielding effectiveness (EESt) for the EMI shielding materials… ▽ More Materials with electromagnetic interference (EMI) shielding in the terahertz (THz) regime, while minimizing the quantity used, are highly demanded for future information communication, healthcare and mineral resource exploration applications. Currently, there is often a trade-off between the amount of material used and the absolute EMI shielding effectiveness (EESt) for the EMI shielding materials. Here, we address this trade-off by harnessing the unique properties of two-dimensional (2D) beta12-borophene (beta12-Br) nanosheets. Leveraging beta12-Br's light weight and exceptional electron mobility characteristics, which represent among the highest reported values to date, we simultaneously achieve a THz EMI shield effectiveness (SE) of 70 dB and an EESt of 4.8E5 dB cm^2/g (@0.87 THz) using a beta12-Br polymer composite. This surpasses the values of previously reported THz shielding materials with an EESt less than 3E5 dB cm^2/g and a SE smaller than 60 dB, while only needs 0.1 wt.% of these materials to realize the same SE value. Furthermore, by capitalizing on the composite's superior mechanical properties, with 158% tensile strain at a Young's modulus of 33 MPa, we demonstrate the high-efficiency shielding performances of conformably coated surfaces based on beta12-Br nanosheets, suggesting their great potential in EMI shielding area. △ Less

Submitted 21 July, 2024; originally announced July 2024.

Studies of Cherenkov Photon Production in PbF$_2$ Crystals using Proton Beams at Fermilab

Authors: Thomas Anderson, Alberto Belloni, Grace Cummings, Sarah Eno, Nora Fischer, Liang Guan, Yuxiang Guo, Robert Hirosky, James Hirschauer, Yihui Lai, Daniel Levin, Hui-Chi Lin, Mekhala Paranjpe, Jianming Qian, Bing Zhou, Junjie Zhu, Ren-Yuan Zhu

Abstract: Future lepton colliders such as the FCC-ee, CEPC, ILC, or a muon collider will collect large data samples that allow precision physics studies with unprecedented accuracy, especially when the data is collected by innovative state-of-the-art detectors. An electromagnetic calorimeter based on scintillating crystals, designed to separately record Cherenkov and scintillation light, can achieve precisi… ▽ More Future lepton colliders such as the FCC-ee, CEPC, ILC, or a muon collider will collect large data samples that allow precision physics studies with unprecedented accuracy, especially when the data is collected by innovative state-of-the-art detectors. An electromagnetic calorimeter based on scintillating crystals, designed to separately record Cherenkov and scintillation light, can achieve precision measurements of electrons and photons without sacrificing jet energy resolution, given adequate light collection efficiency and separation. This paper presents initial measurements from a program aimed at developing such a calorimeter system for future colliders. We focus on using PbF2 crystals to enhance the understanding of Cherenkov light collection, marking the first step in this endeavor. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Comments: 10 pages

Optical vortex-antivortex crystallization in free space

Authors: Haolin Lin, Yixuan Liao, Guohua Liu, Jianbin Ren, Zhen Li, Zhenqiang Chen, Boris A. Malomed, Shenhe Fu

Abstract: Stable vortex lattices are basic dynamical patterns which have been demonstrated in physical systems including superconductor physics, Bose-Einstein condensates, hydrodynamics and optics. Vortex-antivortex (VAV) ensembles can be produced, self-organizing into the respective polar lattices. However, these structures are in general highly unstable due to the strong VAV attraction. Here, we demonstra… ▽ More Stable vortex lattices are basic dynamical patterns which have been demonstrated in physical systems including superconductor physics, Bose-Einstein condensates, hydrodynamics and optics. Vortex-antivortex (VAV) ensembles can be produced, self-organizing into the respective polar lattices. However, these structures are in general highly unstable due to the strong VAV attraction. Here, we demonstrate that multiple optical VAV clusters nested in the propagating coherent field can crystallize into patterns which preserve their lattice structures over distance up to several Rayleigh lengths. To explain this phenomenon, we present a model for effective interactions between the vortices and antivortices at different lattice sites. The observed VAV crystallization is a consequence of the globally balanced VAV couplings. As the crystallization does not require the presence of nonlinearities and appears in free space, it may find applications to high-capacity optical communications and multiparticle manipulations. Our findings suggest possibilities for constructing VAV complexes through the orbit-orbit couplings, which differs from the extensively studied spin-orbit couplings. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: to be published in Nature Communications; 21pages, 6 figures

Periodic domain inversion in single crystal barium titanate-on-insulator thin film

Authors: Pragati Aashna, Hong-Lin Lin, Yu Cao, Yuhui Yin, Yuan Gao, Sakthi Sanjeev Mohanraj, Di Zhu, Aaron Danner

Abstract: We report experimentally achieving first-ever electric field periodic poling of single crystal barium titanate (BTO, or BaTiO3) thin film on insulator. Owing to the outstanding optical nonlinearities of BTO, this result is a key step towards achieving quasi-phase-matching in BTO. We first grow the BTO thin film on a dysprosium scandate substrate using pulsed laser deposition with a thin layer of s… ▽ More We report experimentally achieving first-ever electric field periodic poling of single crystal barium titanate (BTO, or BaTiO3) thin film on insulator. Owing to the outstanding optical nonlinearities of BTO, this result is a key step towards achieving quasi-phase-matching in BTO. We first grow the BTO thin film on a dysprosium scandate substrate using pulsed laser deposition with a thin layer of strontium ruthenate later serving as the bottom electrode for poling. We present characterization of the BTO thin film using x-ray diffraction and piezo-response force microscopy to clearly demonstrate single crystal, single domain growth of the film which enables the desired periodic poling. To investigate the poling quality, we apply both non-destructive piezo force response microscopy and destructive etching-assisted scanning electron microscopy and we show that high quality, uniform and intransient poling with 50 % duty cycle and periods ranging from 2 μm to 10 μm is achieved. The successful realization of periodic poling in BTO thin film unlocks the potential for highly efficient nonlinear processes under quasi-phase-matching that seemed far-fetched with prior polycrystalline BTO thin films which predominantly relied on efficiency-limited random or non-phase matching conditions and is a key step towards integration of BTO photonic devices. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Efficient and Precise Force Field Optimization for Biomolecules Using DPA-2

Authors: Junhan Chang, Duo Zhang, Yuqing Deng, Hongrui Lin, Zhirong Liu, Linfeng Zhang, Hang Zheng, Xinyan Wang

Abstract: Molecular simulations are essential tools in computational chemistry, enabling the prediction and understanding of molecular interactions and thermodynamic properties of biomolecules. However, traditional force fields face significant challenges in accurately representing novel molecules and complex chemical environments due to the labor-intensive process of manually setting optimization parameter… ▽ More Molecular simulations are essential tools in computational chemistry, enabling the prediction and understanding of molecular interactions and thermodynamic properties of biomolecules. However, traditional force fields face significant challenges in accurately representing novel molecules and complex chemical environments due to the labor-intensive process of manually setting optimization parameters and the high computational cost of quantum mechanical calculations. To overcome these difficulties, we fine-tuned a high-accuracy DPA-2 pre-trained model and applied it to optimize force field parameters on-the-fly, significantly reducing computational costs. Our method combines this fine-tuned DPA-2 model with a node-embedding-based similarity metric, allowing seamless augmentation to new chemical species without manual intervention. We applied this process to the TYK2 inhibitor and PTP1B systems and demonstrated its effectiveness through the improvement of free energy perturbation calculation results. This advancement contributes valuable insights and tools for the computational chemistry community. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Wavefront shaping simulations with augmented partial factorization

Authors: Ho-Chun Lin, Zeyu Wang, Chia Wei Hsu

Abstract: Wavefront shaping can tailor multipath interference to control multiple scattering of waves in complex optical systems. However, full-wave simulations that capture multiple scattering are computationally demanding given the large system size and the large number of input channels. Recently, an "augmented partial factorization" (APF) method was proposed to significantly speed-up such full-wave simu… ▽ More Wavefront shaping can tailor multipath interference to control multiple scattering of waves in complex optical systems. However, full-wave simulations that capture multiple scattering are computationally demanding given the large system size and the large number of input channels. Recently, an "augmented partial factorization" (APF) method was proposed to significantly speed-up such full-wave simulations. In this tutorial, we illustrate how to perform wavefront shaping simulations with the APF method using the open-source frequency-domain electromagnetic scattering solver MESTI. We present the foundational concepts and then walk through four examples: computing the scattering matrix of a slab with random permittivities, open high-transmission channels through disorder, focusing inside disorder with phase conjugation, and reflection matrix computation in a spatial focused-beam basis. The goal is to lower the barrier for researchers to use simulations to explore the rich phenomena enabled by wavefront shaping. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Full transmission of vectorial waves through 3D multiple-scattering media

Authors: Ho-Chun Lin, Chia Wei Hsu

Abstract: A striking prediction from the random matrix theory in mesoscopic physics is the existence of "open channels": waves that can use multipath interference to achieve perfect transmission across an opaque disordered medium even in the multiple-scattering regime. Realization of such open channels requires a coherent control of the complete incident wavefront. To date, the open channels have only been… ▽ More A striking prediction from the random matrix theory in mesoscopic physics is the existence of "open channels": waves that can use multipath interference to achieve perfect transmission across an opaque disordered medium even in the multiple-scattering regime. Realization of such open channels requires a coherent control of the complete incident wavefront. To date, the open channels have only been demonstrated in scalar two-dimensional (2D) structures, both experimentally and with numerical studies. Here, we utilize a recently proposed "augmented partial factorization" full-wave simulation method to compute the scattering matrix from 3D vectorial Maxwell's equations and demonstrate the existence of open channels in 3D disordered media. We examine the spatial profile of such open channels, demonstrate the existence of a bimodal transmission eigenvalue distribution with full control, and study the effects of incomplete polarization control and of a finite illumination area. This study confirms the validity of the random matrix theory in vectorial systems. The simulation framework provides full access to the complex multi-channel wave transport in 3D disordered systems, filling the gap left by experimental capabilities. △ Less

Submitted 10 June, 2024; originally announced June 2024.

A high-performance reconstruction method for partially coherent ptychography

Authors: Wenhui Xu, Shoucong Ning, Pengju Sheng, Huixiang Lin, Angus I Kirkland, Yong Peng, Fucai Zhang

Abstract: Ptychography is now integrated as a tool in mainstream microscopy allowing quantitative and high-resolution imaging capabilities over a wide field of view. However, its ultimate performance is inevitably limited by the available coherent flux when implemented using electrons or laboratory X-ray sources. We present a universal reconstruction algorithm with high tolerance to low coherence for both f… ▽ More Ptychography is now integrated as a tool in mainstream microscopy allowing quantitative and high-resolution imaging capabilities over a wide field of view. However, its ultimate performance is inevitably limited by the available coherent flux when implemented using electrons or laboratory X-ray sources. We present a universal reconstruction algorithm with high tolerance to low coherence for both far-field and near-field ptychography. The approach is practical for partial temporal and spatial coherence and requires no prior knowledge of the source properties. Our initial visible-light and electron data show that the method can dramatically improve the reconstruction quality and accelerate the convergence rate of the reconstruction. The approach also integrates well into existing ptychographic engines. It can also improve mixed-state and numerical monochromatisation methods, requiring a smaller number of coherent modes or lower dimensionality of Krylov subspace while providing more stable and faster convergence. We propose that this approach could have significant impact on ptychography of weakly scattering samples. △ Less

Submitted 9 June, 2024; originally announced June 2024.

On-Chip Vectorial Structured Light Manipulation via Inverse Design

Authors: Xiaobin Lin, Maoliang Wei, Kunhao Lei, Zijia Wang, Chi Wang, Hui Ma, Yuting Ye, Qiwei Zhan, Da Li, Shixun Dai, Baile Zhang, Xiaoyong Hu, Lan Li, Erping Li, Hongtao Lin

Abstract: On-chip structured light, with potentially infinite complexity, has emerged as a linchpin in the realm of integrated photonics. However, the realization of arbitrarily tailoring a multitude of light field dimensions in complex media remains a challenge1, Through associating physical light fields and mathematical function spaces by introducing a mapping operator, we proposed a data-driven inverse d… ▽ More On-chip structured light, with potentially infinite complexity, has emerged as a linchpin in the realm of integrated photonics. However, the realization of arbitrarily tailoring a multitude of light field dimensions in complex media remains a challenge1, Through associating physical light fields and mathematical function spaces by introducing a mapping operator, we proposed a data-driven inverse design method to precisely manipulate between any two structured light fields in the on-chip high-dimensional Hilbert space. To illustrate, light field conversion in on-chip topological photonics was achieved. High-performance topological coupling devices with minimal insertion loss and customizable topological routing devices were designed and realized. Our method provides a new paradigm to enable precise manipulation over the on-chip vectorial structured light and paves the way for the realization of complex photonic functions. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Comments: 50 pages, 18 figures

On the acceptance, commissioning, and quality assurance of electron FLASH units

Authors: Allison Palmiero, Kevin Liu, Julie Colnot, Nitish Chopra, Denae Neill, Luke Connell, Brett Velasquez, Albert C. Koong, Steven H. Lin, Peter Balter, Ramesh Tailor, Charlotte Robert, Jean-François Germond, Patrik Gonçalves Jorge, Reiner Geyer, Sam Beddar, Raphael Moeckli, Emil Schüler

Abstract: Background & Purpose: FLASH or ultra-high dose rate (UHDR) radiation therapy (RT) has gained attention in recent years for its ability to spare normal tissues relative to conventional dose rate (CDR) RT in various preclinical trials. However, clinical implementation of this promising treatment option has been limited because of the lack of availability of accelerators capable of delivering UHDR RT… ▽ More Background & Purpose: FLASH or ultra-high dose rate (UHDR) radiation therapy (RT) has gained attention in recent years for its ability to spare normal tissues relative to conventional dose rate (CDR) RT in various preclinical trials. However, clinical implementation of this promising treatment option has been limited because of the lack of availability of accelerators capable of delivering UHDR RT. We established a framework for the acceptance, commissioning, and periodic quality assurance (QA) of electron FLASH units and present an example of commissioning. Methods: A protocol for acceptance, commissioning, and QA of UHDR linear accelerators was established by combining and adapting standards and professional recommendations for standard linear accelerators based on the experience with UHDR at four clinical centers that use different UHDR devices. Non-standard dosimetric beam parameters considered included pulse width, pulse repetition frequency, dose per pulse, and instantaneous dose rate, together with recommendations on how to acquire these measurements. Results: The 6 and 9 MeV beams of an UHDR electron device were commissioned by using this developed protocol. Measurements were acquired with a combination of ion chambers, beam current transformers (BCTs), and dose rate independent passive dosimeters. The unit was calibrated according to the concept of redundant dosimetry using a reference setup. Conclusions: This study provides detailed recommendations for the acceptance testing, commissioning, and routine QA of low-energy electron UHDR linear accelerators. The proposed framework is not limited to any specific unit, making it applicable to all existing eFLASH units in the market. Through practical insights and theoretical discourse, this document establishes a benchmark for the commissioning of UHDR devices for clinical use. △ Less

Submitted 23 May, 2024; originally announced May 2024.

Comments: 22 Pages, 8 Figures

GMXPolymer: a generated polymerization algorithm based on GROMACS

Authors: Jianchuan Liu, Haiyan Lin, Xun Li

Abstract: This work introduces a method for generating generalized structures of amorphous polymers using simulated polymerization and molecular dynamics equilibration, with a particular focus on amorphous polymers. The techniques and algorithms used in this method are described in the main text, and example input scripts are provided for the GMXPolymer code, which is based on the GROMACS molecular dynamics… ▽ More This work introduces a method for generating generalized structures of amorphous polymers using simulated polymerization and molecular dynamics equilibration, with a particular focus on amorphous polymers. The techniques and algorithms used in this method are described in the main text, and example input scripts are provided for the GMXPolymer code, which is based on the GROMACS molecular dynamics package. To demonstrate the efficacy of our method, we apply it to different glassy polymers exhibiting varying degrees of functionality, polarity, and rigidity. The reliability of the method is validated by comparing simulation results to experimental data for various structural and thermal properties, all of which show excellent agreement. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Deep Geometry Handling and Fragment-wise Molecular 3D Graph Generation

Authors: Odin Zhang, Yufei Huang, Shichen Cheng, Mengyao Yu, Xujun Zhang, Haitao Lin, Yundian Zeng, Mingyang Wang, Zhenxing Wu, Huifeng Zhao, Zaixi Zhang, Chenqing Hua, Yu Kang, Sunliang Cui, Peichen Pan, Chang-Yu Hsieh, Tingjun Hou

Abstract: Most earlier 3D structure-based molecular generation approaches follow an atom-wise paradigm, incrementally adding atoms to a partially built molecular fragment within protein pockets. These methods, while effective in designing tightly bound ligands, often overlook other essential properties such as synthesizability. The fragment-wise generation paradigm offers a promising solution. However, a co… ▽ More Most earlier 3D structure-based molecular generation approaches follow an atom-wise paradigm, incrementally adding atoms to a partially built molecular fragment within protein pockets. These methods, while effective in designing tightly bound ligands, often overlook other essential properties such as synthesizability. The fragment-wise generation paradigm offers a promising solution. However, a common challenge across both atom-wise and fragment-wise methods lies in their limited ability to co-design plausible chemical and geometrical structures, resulting in distorted conformations. In response to this challenge, we introduce the Deep Geometry Handling protocol, a more abstract design that extends the design focus beyond the model architecture. Through a comprehensive review of existing geometry-related models and their protocols, we propose a novel hybrid strategy, culminating in the development of FragGen - a geometry-reliable, fragment-wise molecular generation method. FragGen marks a significant leap forward in the quality of generated geometry and the synthesis accessibility of molecules. The efficacy of FragGen is further validated by its successful application in designing type II kinase inhibitors at the nanomolar level. △ Less

Submitted 15 March, 2024; originally announced April 2024.

Voltage tunable sign inversion of magnetoresistance in van der Waals Fe3GeTe2/MoSe2/Fe3GeTe2 tunnel junctions

Authors: Shouguo Zhu, Hailong Lin, Wenkai Zhu, Weihao Li, Jing Zhang, Kaiyou Wang

Abstract: The magnetic tunnel junctions (MTJ) based on van der Waals (vdW) materials possess atomically smooth interfaces with minimal element intermixing. This characteristic ensures that spin polarization is well maintained during transport, leading to the emergence of richer magnetoresistance behaviors. Here, using all 2D vdW MTJs based on magnetic metal Fe3GeTe2 and non-magnetic semiconductor MoSe2, we… ▽ More The magnetic tunnel junctions (MTJ) based on van der Waals (vdW) materials possess atomically smooth interfaces with minimal element intermixing. This characteristic ensures that spin polarization is well maintained during transport, leading to the emergence of richer magnetoresistance behaviors. Here, using all 2D vdW MTJs based on magnetic metal Fe3GeTe2 and non-magnetic semiconductor MoSe2, we demonstrate that the magnitude and even sign of the magnetoresistance can be tuned by the applied voltage. The sign inversion of the magnetoresistance is observed in a wide temperature range below the Curie temperature. This tunable magnetoresistance sign may be attributed to the spin polarizations of the tunneling carriers and the band structure of the two ferromagnetic electrodes. Such robust electrical tunability of magnetoresistance extends the functionalities of low-dimensional spintronics and makes it more appealing for next-generation spintronics with all-vdW MTJs. △ Less

Submitted 22 February, 2024; originally announced February 2024.

Comments: 10pages, 4 figures,submitted to APL

Re-Dock: Towards Flexible and Realistic Molecular Docking with Diffusion Bridge

Authors: Yufei Huang, Odin Zhang, Lirong Wu, Cheng Tan, Haitao Lin, Zhangyang Gao, Siyuan Li, Stan. Z. Li

Abstract: Accurate prediction of protein-ligand binding structures, a task known as molecular docking is crucial for drug design but remains challenging. While deep learning has shown promise, existing methods often depend on holo-protein structures (docked, and not accessible in realistic tasks) or neglect pocket sidechain conformations, leading to limited practical utility and unrealistic conformation pre… ▽ More Accurate prediction of protein-ligand binding structures, a task known as molecular docking is crucial for drug design but remains challenging. While deep learning has shown promise, existing methods often depend on holo-protein structures (docked, and not accessible in realistic tasks) or neglect pocket sidechain conformations, leading to limited practical utility and unrealistic conformation predictions. To fill these gaps, we introduce an under-explored task, named flexible docking to predict poses of ligand and pocket sidechains simultaneously and introduce Re-Dock, a novel diffusion bridge generative model extended to geometric manifolds. Specifically, we propose energy-to-geometry mapping inspired by the Newton-Euler equation to co-model the binding energy and conformations for reflecting the energy-constrained docking generative process. Comprehensive experiments on designed benchmark datasets including apo-dock and cross-dock demonstrate our model's superior effectiveness and efficiency over current methods. △ Less

Submitted 21 February, 2024; v1 submitted 18 February, 2024; originally announced February 2024.

Structural and optical characterization of NiO polycrystalline thin films fabricated by spray-pyrolysis

Authors: Lakshmi Das, Esdras J. Canto-Aguilar, Tlek Tapani, Haifeng Lin, Hinduja Bhuvanendran, Nicolas Boulanger, Roushdey Salh, Eduardo Gracia-Espino, Nicolò Maccaferri

Abstract: Nickel (II) oxide, NiO, a wide band gap Mott insulator characterized by strong Coulomb repulsion between d-electrons and displaying antiferromagnetic order at room temperature, has gained attention in recent years as a very promising candidate for applications in a broad set of areas, including chemistry and metallurgy to spintronics and energy harvesting. Here, we report on the synthesis of polyc… ▽ More Nickel (II) oxide, NiO, a wide band gap Mott insulator characterized by strong Coulomb repulsion between d-electrons and displaying antiferromagnetic order at room temperature, has gained attention in recent years as a very promising candidate for applications in a broad set of areas, including chemistry and metallurgy to spintronics and energy harvesting. Here, we report on the synthesis of polycrystalline NiO fabricated using spray-pyrolysis technique, which is a deposition technique able to produce quite uniform films of pure and crystalline materials without the need of high vacuum or inert atmospheres. We then characterized the composition and structure of our NiO thin films using X-ray diffraction, and atomic force and scanning electron microscopies, respectively. We completed our study by looking at the phononic and magnonic properties of our NiO thin films via Raman spectroscopy, and at the ultrafast electron dynamics by using optical pump probe spectroscopy. We found that our NiO samples display the same phononic and magnonic dispersion expected for single crystal NiO at room temperature, and that electron dynamics in our system is similar to those of previously reported NiO mono- and poli-crystalline systems synthesized with different techniques. These results prove that spray-pyrolysis can be used as affordable and large-scale fabrication technique to synthetize strongly correlated materials for a large set of applications. △ Less

Submitted 2 February, 2024; originally announced February 2024.

Photonic Spin-Orbit Coupling Induced by Deep-Subwavelength Structured Light

Authors: Xin Zhang, Guohua Liu, Yanwen Hu, Haolin Lin, Zepei Zeng, Xiliang Zhang, Zhen Li, Zhenqiang Chen, Shenhe Fu

Abstract: We demonstrate both theoretically and experimentally beam-dependent photonic spin-orbit coupling in a two-wave mixing process described by an equivalent of the Pauli equation in quantum mechanics. The considered structured light in the system is comprising a superposition of two orthogonal spin-orbit-coupled states defined as spin up and spin down equivalents. The spin-orbit coupling is manifested… ▽ More We demonstrate both theoretically and experimentally beam-dependent photonic spin-orbit coupling in a two-wave mixing process described by an equivalent of the Pauli equation in quantum mechanics. The considered structured light in the system is comprising a superposition of two orthogonal spin-orbit-coupled states defined as spin up and spin down equivalents. The spin-orbit coupling is manifested by prominent pseudo spin precession as well as spin-transport-induced orbital angular momentum generation in a photonic crystal film of wavelength thickness. The coupling effect is significantly enhanced by using a deep-subwavelength carrier envelope, different from previous studies which depend on materials. The beam-dependent coupling effect can find intriguing applications; for instance, it is used in precisely measuring variation of light with spatial resolution up to 15 nm. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: 9 pages, 8 figures, and 68 conferences

Protected Transverse Electric Waves in Topological Dielectric Waveguides

Authors: Rui Zhou, Minglin L. N. Chen, Xingtong Shi, Yan Ren, Zihao Yu, Yu Tian, Y. Liu, Hai Lin

Abstract: Waveguides are fundamental components in communication systems. However, they suffer from reflection and scattering losses at sharp routes or defects. The breakthrough in developing topological photonic crystals (PhCs) provides promising solutions to robust signal transmission. In this work, we propose a new mechanism for protecting wave-guiding modes by decorating the boundaries of a conventional… ▽ More Waveguides are fundamental components in communication systems. However, they suffer from reflection and scattering losses at sharp routes or defects. The breakthrough in developing topological photonic crystals (PhCs) provides promising solutions to robust signal transmission. In this work, we propose a new mechanism for protecting wave-guiding modes by decorating the boundaries of a conventional waveguide with valley-Hall PhCs. This special layout enables the robust propagation of conventional transverse electric waves against defects and bends. Moreover, the proposed waveguide is compatible with the substrate integrated waveguide (SIW). High efficient mode conversion from the SIW to the proposed waveguide is achievable. By leveraging the idea of topology to conventional waveguides, we provide a powerful and practical tool that can largely improve the performance of microwave and millimeter-wave integrated circuits while reserving the features of wave-guiding modes. △ Less

Submitted 5 December, 2023; originally announced January 2024.

Comments: 5 figures

Dry synthesis of bi-layer nanoporous metal films as plasmonic metamaterial

Authors: Vincenzo Caligiuri, Hyunah Kwon, Andrea Griesi, Yurii P. Ivanov, Andrea Schirato, Alessandro Alabastri, Massimo Cuscunà, Gianluca Balestra, Antonio De Luca, Tlek Tapani, Haifeng Lin, Nicolo Maccaferri, Roman Krahne, Giorgio Divitini, Peer Fischer, Denis Garoli

Abstract: Nanoporous metals are a class of nanostructured materials finding extensive applications in multiple fields thanks to their unique properties attributed to their high surface area and interconnected nanoscale ligaments. They can be pre-pared following different strategies, but the deposition of an arbitrary pure porous metal is still challenging. Recently, a dry synthesis of nanoporous films based… ▽ More Nanoporous metals are a class of nanostructured materials finding extensive applications in multiple fields thanks to their unique properties attributed to their high surface area and interconnected nanoscale ligaments. They can be pre-pared following different strategies, but the deposition of an arbitrary pure porous metal is still challenging. Recently, a dry synthesis of nanoporous films based on the plasma treat-ment of metal thin layers deposited by physical vapour deposition has been demonstrated, as a general route to form pure nanoporous films from a large set of metals. An interest-ing aspect related to this approach is the possibility to apply the same methodology to deposit the porous films as a multilayer. In this way, it is possible to explore the properties of different porous metals in close contact. As demonstrated in this paper, interesting plasmonic properties emerge in a nanoporous Au-Ag bi-layer. The versatility of the method coupled with the possibility to include many different metals, provides an opportunity to tailor their optical resonances and to exploit the chemical and mechanical properties of compo-nents, which is of great interest to applications ranging from sensing, to photochemistry and photocatalysis. △ Less

Submitted 27 December, 2023; v1 submitted 24 December, 2023; originally announced December 2023.

Lithium niobate-enhanced laser photoacoustic spectroscopy

Authors: Haoyang Lin, Wenguo Zhu, Yongchun Zhong, Jieyuan Tang, Huihui Lu, Jianhui Yu, Huadan Zheng

Abstract: In this paper, the photoacoustic spectroscopy technique based on lithium niobate crystals is initially reported, to our knowledge. A novel dual-cantilever tuning fork structure and new electrodes have been designed using Y-cut 128° blackened lithium niobate wafers. The tuning fork, with a resonant frequency of only 10.46 kHz and a prong gap of 1 mm, is engineered to achieve superior performance in… ▽ More In this paper, the photoacoustic spectroscopy technique based on lithium niobate crystals is initially reported, to our knowledge. A novel dual-cantilever tuning fork structure and new electrodes have been designed using Y-cut 128° blackened lithium niobate wafers. The tuning fork, with a resonant frequency of only 10.46 kHz and a prong gap of 1 mm, is engineered to achieve superior performance in photoacoustic spectroscopy. In the demonstration experiment, acetylene was detected using a 1.53 um semiconductor laser, achieving a detection limit of about 9 ppb within a one-second integration time. △ Less

Submitted 1 December, 2023; originally announced December 2023.

Comments: 8 pages, 4 figures

High Q and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule

Authors: Jiyuan Zhai, Weimin Pan, Feisi He, Rui Ge, Zhenghui Mi, Peng Sha, Song Jin, Ruixiong Han, Qunyao Wang, Haiying Lin, Guangwei Wang, Mei Li, Minjing Sang, Liangrui Sun, Rui Ye, Tongxian Zhao, Shaopeng Li, Keyu Zhu, Baiqi Liu, Xiaolong Wang, Xiangchen Yang, Xiaojuan Bian, Xiangzhen Zhang, Huizhou Ma, Xuwen Dai , et al. (14 additional authors not shown)

Abstract: World's first 1.3 GHz cryomodule containing eight 9-cell superconducting radio-frequency (RF) cavities treated by medium-temperature furnace baking (mid-T bake) was developed, assembled and tested at IHEP for the Dalian Advanced Light Source (DALS) and CEPC R&D. The 9-cell cavities in the cryomodule achieved an unprecedented highest average Q0 of 3.8E10 at 16 MV/m and 3.6E10 at 21 MV/m in the hori… ▽ More World's first 1.3 GHz cryomodule containing eight 9-cell superconducting radio-frequency (RF) cavities treated by medium-temperature furnace baking (mid-T bake) was developed, assembled and tested at IHEP for the Dalian Advanced Light Source (DALS) and CEPC R&D. The 9-cell cavities in the cryomodule achieved an unprecedented highest average Q0 of 3.8E10 at 16 MV/m and 3.6E10 at 21 MV/m in the horizontal test. The cryomodule can operate stably up to a total CW RF voltage greater than 191 MV, with an average cavity CW accelerating gradient of more than 23 MV/m. The results significantly exceed the specifications of CEPC, DALS and the other high repetition rate free electron laser facilities (LCLS-II, LCLS-II-HE, SHINE, S3FEL). There is evidence that the mid-T bake cavity may not require fast cool-down or long processing time in the cryomodule. This paper reviews the cryomodule performance and discusses some important issues in cryomodule assembly and testing. △ Less

Submitted 2 December, 2023; originally announced December 2023.

Comments: 5 pages, 6 figures

High-efficiency high-NA metalens designed by maximizing the efficiency limit

Authors: Shiyu Li, Ho-Chun Lin, Chia Wei Hsu

Abstract: Theoretical bounds are commonly used to assess the limitations of photonic design. Here we introduce a more active way to use theoretical bounds, integrating them into part of the design process and identifying optimal system parameters that maximize the efficiency limit itself. As an example, we consider wide-field-of-view high-numerical-aperture metalenses, which can be used for high-resolution… ▽ More Theoretical bounds are commonly used to assess the limitations of photonic design. Here we introduce a more active way to use theoretical bounds, integrating them into part of the design process and identifying optimal system parameters that maximize the efficiency limit itself. As an example, we consider wide-field-of-view high-numerical-aperture metalenses, which can be used for high-resolution imaging in microscopy and endoscopy, but no existing design has achieved a high efficiency. By choosing aperture sizes to maximize an efficiency bound, setting the thickness according to a thickness bound, and then performing inverse design, we come up with high-numerical-aperture (NA = 0.9) metalens designs with record-high 98% transmission efficiency and 92% Strehl ratio across all incident angles within a 60-deg field of view, reaching the maximized bound. This maximizing-efficiency-limit approach applies to any multi-channel system and can help a wide range of optical devices reach their highest possible performance. △ Less

Submitted 1 December, 2023; v1 submitted 22 November, 2023; originally announced November 2023.

Journal ref: Optica 11, 454-459 (2024)

Status and Prospects of the PandaX-III Experiment

Authors: Wenming Zhang, Heng Lin, Yuanchun Liu, Ke Han, Kaixiang Ni, Shaobo Wang, Wenchang Zhai

Abstract: The PandaX-III experiment searches the neutrinoless double beta decay of $^{136}$Xe with a high-pressure xenon gaseous time projection chamber~(TPC). Thermal-bonding Micromegas modules are used for charge collection. Benefitting from the excellent energy resolution and imaging capability, the background rate can be significantly suppressed through the topological information of events. The technol… ▽ More The PandaX-III experiment searches the neutrinoless double beta decay of $^{136}$Xe with a high-pressure xenon gaseous time projection chamber~(TPC). Thermal-bonding Micromegas modules are used for charge collection. Benefitting from the excellent energy resolution and imaging capability, the background rate can be significantly suppressed through the topological information of events. The technology is successfully demonstrated by a prototype detector. The final detector has been constructed. In this paper, we will report the status of the PandaX-III experiment, including the construction and commissioning of the final detector, and the Micromegas-based TPC performance test in the prototype detector. △ Less

Submitted 22 November, 2023; originally announced November 2023.

Generation of ultrashort light pulses carrying orbital angular momentum using a vortex plate retarder-based approach

Authors: Tlek Tapani, Haifeng Lin, Aitor De Andres, Spencer W. Jolly, Hinduja Bhuvanendran, Nicolò Maccaferri

Abstract: We use a vortex retarder-based approach to generate few optical cycles light pulses carrying orbital angular momentum (known also as twisted light or optical vortex) from a Yb:KGW oscillator pumping a noncollinear optical parametric amplifier generating sub-10 fs linearly polarized light pulses in the near infrared spectral range (central wavelength 850 nm). We characterize such vortices both spat… ▽ More We use a vortex retarder-based approach to generate few optical cycles light pulses carrying orbital angular momentum (known also as twisted light or optical vortex) from a Yb:KGW oscillator pumping a noncollinear optical parametric amplifier generating sub-10 fs linearly polarized light pulses in the near infrared spectral range (central wavelength 850 nm). We characterize such vortices both spatially and temporally by using astigmatic imaging technique and second harmonic generation-based frequency resolved optical gating, respectively. The generation of optical vortices is analyzed, and its structure reconstructed by estimating the spatio-spectral field and Fourier transforming it into the temporal domain. As a proof of concept, we show that we can also generate sub-20 fs light pulses carrying orbital angular momentum and with arbitrary polarization on the first-order Poincaré sphere. △ Less

Submitted 17 November, 2023; v1 submitted 13 November, 2023; originally announced November 2023.

Broadband ptychographic imaging of biological samples using a deconvolution algorithm

Authors: Huixiang Lin, Fucai Zhang

Abstract: Ptychography is an attractive advance of coherent diffraction imaging (CDI), which can provide high lateral resolution and wide field of view. The theoretical resolution of ptychography is dose-limited, therefore making ptychography workable with a broadband source will be highly beneficial. However, broad spectra of light source conflict with the high coherence assumption in CDI that the current… ▽ More Ptychography is an attractive advance of coherent diffraction imaging (CDI), which can provide high lateral resolution and wide field of view. The theoretical resolution of ptychography is dose-limited, therefore making ptychography workable with a broadband source will be highly beneficial. However, broad spectra of light source conflict with the high coherence assumption in CDI that the current reconstruction algorithm were built upon. In this paper, we demonstrated that incorporation of a blind deconvolution in the reconstruction algorithm can improve the image quality of ptychography with broadband source. This broadband reconstruction algorithm can obtain high-quality amplitude and phase images of complex-valued samples requiring no knowledge of the illumination spectrum. Optical experiments using biological samples demonstrate the effectiveness of our method. The significant improvement in low coherence tolerance by our approach can pave the way for implementing ultrafast imaging with femtosecond or attosecond lasers or high-flux ptychographic imaging with laboratory EUV or X-ray sources. △ Less

Submitted 3 November, 2023; originally announced November 2023.

Comments: 6 pages, 2 figures

Programmable Photonic Simulator for Spin Glass Models

Authors: Weiru Fan, Yuxuan Sun, Xingqi Xu, Da-Wei Wang, Shi-Yao Zhu, Hai-Qing Lin

Abstract: Spin glasses featured by frustrated interactions and metastable states have important applications in chemistry, material sciences and artificial neural networks. However, the solution of the spin glass models is hindered by the computational complexity that exponentially increases with the sample size. Photonic Ising machines based on spatial light modulation can speed up the calculation by obtai… ▽ More Spin glasses featured by frustrated interactions and metastable states have important applications in chemistry, material sciences and artificial neural networks. However, the solution of the spin glass models is hindered by the computational complexity that exponentially increases with the sample size. Photonic Ising machines based on spatial light modulation can speed up the calculation by obtaining the Hamiltonian from the modulated light intensity. However, the large-scale generalization to various spin couplings and higher dimensions is still elusive. Here, we develop a Fourier-mask method to program the spin couplings in photonic Ising machines. We observe the phase transition of the two-dimensional Mattis model and the J$\mathrm{_1}$-J$\mathrm{_2}$ model and study the critical phenomena. We also demonstrate that the three-dimensional Ising model, which has not been analytically solved, can be effectively constructed and simulated in two-dimensional lattices with Fourier masks. Our strategy provides a flexible route to tuning couplings and dimensions of statistical spin models, and improves the applicability of optical simulation in neural networks and combinatorial optimization problems. △ Less

Submitted 28 September, 2023; originally announced October 2023.

Differentiable Modeling and Optimization of Battery Electrolyte Mixtures Using Geometric Deep Learning

Authors: Shang Zhu, Bharath Ramsundar, Emil Annevelink, Hongyi Lin, Adarsh Dave, Pin-Wen Guan, Kevin Gering, Venkatasubramanian Viswanathan

Abstract: Electrolytes play a critical role in designing next-generation battery systems, by allowing efficient ion transfer, preventing charge transfer, and stabilizing electrode-electrolyte interfaces. In this work, we develop a differentiable geometric deep learning (GDL) model for chemical mixtures, DiffMix, which is applied in guiding robotic experimentation and optimization towards fast-charging batte… ▽ More Electrolytes play a critical role in designing next-generation battery systems, by allowing efficient ion transfer, preventing charge transfer, and stabilizing electrode-electrolyte interfaces. In this work, we develop a differentiable geometric deep learning (GDL) model for chemical mixtures, DiffMix, which is applied in guiding robotic experimentation and optimization towards fast-charging battery electrolytes. In particular, we extend mixture thermodynamic and transport laws by creating GDL-learnable physical coefficients. We evaluate our model with mixture thermodynamics and ion transport properties, where we show improved prediction accuracy and model robustness of DiffMix than its purely data-driven variants. Furthermore, with a robotic experimentation setup, Clio, we improve ionic conductivity of electrolytes by over 18.8% within 10 experimental steps, via differentiable optimization built on DiffMix gradients. By combining GDL, mixture physics laws, and robotic experimentation, DiffMix expands the predictive modeling methods for chemical mixtures and enables efficient optimization in large chemical spaces. △ Less

Submitted 1 November, 2023; v1 submitted 3 October, 2023; originally announced October 2023.

Nuclear Recoil Identification in a Scientific Charge-Coupled Device

Authors: K. J. McGuire, A. E. Chavarria, N. Castello-Mor, S. Lee, B. Kilminster, R. Vilar, A. Alvarez, J. Jung, J. Cuevas-Zepeda, C. De Dominicis, R. Gaïor, L. Iddir, A. Letessier-Selvon, H. Lin, S. Munagavalasa, D. Norcini, S. Paul, P. Privitera, R. Smida, M. Traina, R. Yajur, J-P. Zopounidis

Abstract: Charge-coupled devices (CCDs) are a leading technology in direct dark matter searches because of their eV-scale energy threshold and high spatial resolution. The sensitivity of future CCD experiments could be enhanced by distinguishing nuclear recoil signals from electronic recoil backgrounds in the CCD silicon target. We present a technique for event-by-event identification of nuclear recoils bas… ▽ More Charge-coupled devices (CCDs) are a leading technology in direct dark matter searches because of their eV-scale energy threshold and high spatial resolution. The sensitivity of future CCD experiments could be enhanced by distinguishing nuclear recoil signals from electronic recoil backgrounds in the CCD silicon target. We present a technique for event-by-event identification of nuclear recoils based on the spatial correlation between the primary ionization event and the lattice defect left behind by the recoiling atom, later identified as a localized excess of leakage current under thermal stimulation. By irradiating a CCD with an $^{241}$Am$^{9}$Be neutron source, we demonstrate $>93\%$ identification efficiency for nuclear recoils with energies $>150$ keV, where the ionization events were confirmed to be nuclear recoils from topology. The technique remains fully efficient down to 90 keV, decreasing to 50$\%$ at 8 keV, and reaching ($6\pm2$)$\%$ at 1.5--3.5 keV. Irradiation with a $^{24}$Na $γ$-ray source shows no evidence of defect generation by electronic recoils, with the fraction of electronic recoils with energies $<85$ keV that are spatially correlated with defects $<0.1$$\%$. △ Less

Submitted 11 October, 2023; v1 submitted 14 September, 2023; originally announced September 2023.

Comments: 9 pages, 7 figures

Event-by-Event Direction Reconstruction of Solar Neutrinos in a High Light-Yield Liquid Scintillator

Authors: A. Allega, M. R. Anderson, S. Andringa, J. Antunes, M. Askins, D. J. Auty, A. Bacon, J. Baker, N. Barros, F. Barão, R. Bayes, E. W. Beier, T. S. Bezerra, A. Bialek, S. D. Biller, E. Blucher, E. Caden, E. J. Callaghan, M. Chen, S. Cheng, B. Cleveland, D. Cookman, J. Corning, M. A. Cox, R. Dehghani , et al. (94 additional authors not shown)

Abstract: The direction of individual $^8$B solar neutrinos has been reconstructed using the SNO+ liquid scintillator detector. Prompt, directional Cherenkov light was separated from the slower, isotropic scintillation light using time information, and a maximum likelihood method was used to reconstruct the direction of individual scattered electrons. A clear directional signal was observed, correlated with… ▽ More The direction of individual $^8$B solar neutrinos has been reconstructed using the SNO+ liquid scintillator detector. Prompt, directional Cherenkov light was separated from the slower, isotropic scintillation light using time information, and a maximum likelihood method was used to reconstruct the direction of individual scattered electrons. A clear directional signal was observed, correlated with the solar angle. The observation was aided by a period of low primary fluor concentration that resulted in a slower scintillator decay time. This is the first time that event-by-event direction reconstruction in high light-yield liquid scintillator has been demonstrated in a large-scale detector. △ Less

Submitted 10 April, 2024; v1 submitted 12 September, 2023; originally announced September 2023.

Comments: 6 pages, 6 figures. Accepted manuscript by PRD

"Zero change" platform for monolithic back-end-of-line integration of phase change materials in silicon photonics

Authors: Maoliang Wei, Kai Xu, Bo Tang, Junying Li, Yiting Yun, Peng Zhang, Yingchun Wu, Kangjian Bao, Kunhao Lei, Zequn Chen, Hui Ma, Chunlei Sun, Ruonan Liu, Ming Li, Lan Li, Hongtao Lin

Abstract: Monolithic integration of novel materials for unprecedented device functions without modifying the existing photonic component library is the key to advancing heterogeneous silicon photonic integrated circuits. To achieve this, the introduction of a silicon nitride etching stop layer at selective area, coupled with low-loss oxide trench to waveguide surface, enables the incorporation of various fu… ▽ More Monolithic integration of novel materials for unprecedented device functions without modifying the existing photonic component library is the key to advancing heterogeneous silicon photonic integrated circuits. To achieve this, the introduction of a silicon nitride etching stop layer at selective area, coupled with low-loss oxide trench to waveguide surface, enables the incorporation of various functional materials without disrupting the reliability of foundry-verified devices. As an illustration, two distinct chalcogenide phase change materials (PCM) with remarkable nonvolatile modulation capabilities, namely Sb2Se3 and Ge2Sb2Se4Te1, were monolithic back-end-of-line integrated into silicon photonics. The PCM enables compact phase and intensity tuning units with zero-static power consumption. Taking advantage of these building blocks, the phase error of a push-pull Mach-Zehnder interferometer optical switch could be trimmed by a nonvolatile phase shifter with a 48% peak power consumption reduction. Mirco-ring filters with a rejection ratio >25dB could be applied for >5-bit wavelength selective intensity modulation, and waveguide-based >7-bit intensity-modulation photonic attenuators could achieve >39dB broadband attenuation. The advanced "Zero change" back-end-of-line integration platform could not only facilitate the integration of PCMs for integrated reconfigurable photonics but also open up the possibilities for integrating other excellent optoelectronic materials in the future silicon photonic process design kits. △ Less

Submitted 29 August, 2023; originally announced August 2023.

Comments: 20 pages, 4 figures, submitted to Nature Photonics

Wide Field-of-View, Large-Area Long-wave Infrared Silicon Metalenses

Authors: Hung-I Lin, Jeffrey Geldmeier, Erwan Baleine, Fan Yang, Sensong An, Ying Pan, Clara Rivero-Baleine, Tian Gu, Juejun Hu

Abstract: Long-wave infrared (LWIR, 8-12 $μm$ wavelengths) is a spectral band of vital importance to thermal imaging. Conventional LWIR optics made from single-crystalline Ge and chalcogenide glasses are bulky and fragile. The challenge is exacerbated for wide field-of-view (FOV) optics, which traditionally mandates multiple cascaded elements that severely add to complexity and cost. Here we designed and ex… ▽ More Long-wave infrared (LWIR, 8-12 $μm$ wavelengths) is a spectral band of vital importance to thermal imaging. Conventional LWIR optics made from single-crystalline Ge and chalcogenide glasses are bulky and fragile. The challenge is exacerbated for wide field-of-view (FOV) optics, which traditionally mandates multiple cascaded elements that severely add to complexity and cost. Here we designed and experimentally realized a LWIR metalens platform based on bulk Si wafers featuring 140$^\circ$ FOV. The metalenses, which have diameters exceeding 4 cm, were fabricated using a scalable wafer-level process involving photolithography and deep reactive ion etching. Using a metalens-integrated focal plane array, we further demonstrated wide-angle thermal imaging. △ Less

Submitted 24 July, 2023; originally announced July 2023.

African rice cultivation linked to rising methane

Authors: Zichong Chen, Nicholas Balasus, Haipeng Lin, Hannah Nesser, Daniel J. Jacob

Abstract: Africa has been identified as a major driver of the current rise in atmospheric methane, and this has been attributed to emissions from wetlands and livestock. Here we show that rapidly increasing rice cultivation is another important source, and estimate that it accounts for 7% of the current global rise in methane emissions. Continued rice expansion to feed a rapidly growing population should be… ▽ More Africa has been identified as a major driver of the current rise in atmospheric methane, and this has been attributed to emissions from wetlands and livestock. Here we show that rapidly increasing rice cultivation is another important source, and estimate that it accounts for 7% of the current global rise in methane emissions. Continued rice expansion to feed a rapidly growing population should be considered in climate change mitigation goals. △ Less

Submitted 20 July, 2023; originally announced July 2023.

Comments: 7 pages and 2 figures

Graphene/silicon heterojunction for reconfigurable phase-relevant activation function in coherent optical neural networks

Authors: Chuyu Zhong, Kun Liao, Tianxiang Dai, Maoliang Wei, Hui Ma, Jianghong Wu, Zhibin Zhang, Yuting Ye, Ye Luo, Zequn Chen, Jialing Jian, Chulei Sun, Bo Tang, Peng Zhang, Ruonan Liu, Junying Li, Jianyi Yang, Lan Li, Kaihui Liu, Xiaoyong Hu, Hongtao Lin

Abstract: Optical neural networks (ONNs) herald a new era in information and communication technologies and have implemented various intelligent applications. In an ONN, the activation function (AF) is a crucial component determining the network performances and on-chip AF devices are still in development. Here, we first demonstrate on-chip reconfigurable AF devices with phase activation fulfilled by dual-f… ▽ More Optical neural networks (ONNs) herald a new era in information and communication technologies and have implemented various intelligent applications. In an ONN, the activation function (AF) is a crucial component determining the network performances and on-chip AF devices are still in development. Here, we first demonstrate on-chip reconfigurable AF devices with phase activation fulfilled by dual-functional graphene/silicon (Gra/Si) heterojunctions. With optical modulation and detection in one device, time delays are shorter, energy consumption is lower, reconfigurability is higher and the device footprint is smaller than other on-chip AF strategies. The experimental modulation voltage (power) of our Gra/Si heterojunction achieves as low as 1 V (0.5 mW), superior to many pure silicon counterparts. In the photodetection aspect, a high responsivity of over 200 mA/W is realized. Special nonlinear functions generated are fed into a complex-valued ONN to challenge handwritten letters and image recognition tasks, showing improved accuracy and potential of high-efficient, all-component-integration on-chip ONN. Our results offer new insights for on-chip ONN devices and pave the way to high-performance integrated optoelectronic computing circuits. △ Less

Submitted 13 July, 2023; originally announced July 2023.

A self-sustaining mechanism for Internal Transport Barrier formation in HL-2A tokamak plasmas

Authors: W. H. Lin, J. Garcia, J. Q. Li, S. Mazzi, Z. J. Li, X. X. He, X. Yu

Abstract: The formation of Internal Transport Barrier (ITB) is studied in HL-2A plasmas by means of nonlinear gyrokinetic simulations. A new paradigm for the ITB formation is proposed in which different physics mechanisms play a different role depending on the ITB formation stage. In the early stage, fast ions, introduced by Neutral Beam Injection (NBI) ion system, are found to stabilize the thermal-ion-dri… ▽ More The formation of Internal Transport Barrier (ITB) is studied in HL-2A plasmas by means of nonlinear gyrokinetic simulations. A new paradigm for the ITB formation is proposed in which different physics mechanisms play a different role depending on the ITB formation stage. In the early stage, fast ions, introduced by Neutral Beam Injection (NBI) ion system, are found to stabilize the thermal-ion-driven instability by dilution, thus reducing the ion heat fluxes and finally triggering the ITB. Such dilution effects, however, play a minor role after the ITB is triggered as electromagnetic effects are dominant in the presence of established high pressure gradients. We define the concept of ITB self-sustainment, as the low turbulence levels found within the fully formed ITB are consequences of large scale zonal flows, which in turn are fed by a non-linear interplay with large scale high frequency electromagnetic perturbations destabilized by the ITB itself. △ Less

Submitted 11 July, 2023; originally announced July 2023.

Comments: 8 pages, 5 figures

A topological gap waveguide based on unidirectional locking of pseudo-spins

Authors: Yan Ren, Hai Lin, Rui Zhou, Xintong Shi, Jing Jin, Y. Liu

Abstract: Photonic topological insulators (PTIs) have been widely studied due to the robustness of energy transport via supported edge modes immune to structural disorder. In this work, a topological gap waveguide is constructed by introducing line defect into a topological photonic crystal structure and combining it with a gap waveguide structure, which design therefore combines the advantages of both topo… ▽ More Photonic topological insulators (PTIs) have been widely studied due to the robustness of energy transport via supported edge modes immune to structural disorder. In this work, a topological gap waveguide is constructed by introducing line defect into a topological photonic crystal structure and combining it with a gap waveguide structure, which design therefore combines the advantages of both topological and gap waveguides. Not only does it give high transmission efficiency, but also enables high robustness for energy transmission under structural defects and sharp bends. Our proposed topological waveguide design can be implemented with conventional semiconductor technology and integrated into optical circuits for communication systems. △ Less

Submitted 4 October, 2023; v1 submitted 27 June, 2023; originally announced June 2023.

Comments: 16 pages, 7 figs

Journal ref: J. Appl. Phys. 134 (2023)

Fast multi-channel inverse design through augmented partial factorization

Authors: Shiyu Li, Ho-Chun Lin, Chia Wei Hsu

Abstract: Computer-automated design and discovery have led to high-performance nanophotonic devices with diverse functionalities. However, massively multi-channel systems such as metasurfaces controlling many incident angles and photonic-circuit components coupling many waveguide modes still present a challenge. Conventional methods require $M_{\rm in}$ forward simulations and $M_{\rm in}$ adjoint simulatio… ▽ More Computer-automated design and discovery have led to high-performance nanophotonic devices with diverse functionalities. However, massively multi-channel systems such as metasurfaces controlling many incident angles and photonic-circuit components coupling many waveguide modes still present a challenge. Conventional methods require $M_{\rm in}$ forward simulations and $M_{\rm in}$ adjoint simulations -- $2M_{\rm in}$ simulations in total -- to compute the objective function and its gradient for a design involving the response to $M_{\rm in}$ input channels. By generalizing the adjoint method and the recently proposed augmented partial factorization method, here we show how to obtain both the objective function and its gradient for a massively multi-channel system in a single simulation, achieving over-two-orders-of-magnitude speedup and reduced memory usage. We use this method to inverse design a metasurface beam splitter that separates the incident light to the target diffraction orders for all incident angles of interest, a key component of the dot projector for 3D sensing. This formalism enables efficient inverse design for a wide range of multi-channel optical systems. △ Less

Submitted 25 May, 2023; originally announced June 2023.

Journal ref: ACS Photonics 11, 378-384 (2024)

Extremely asymmetric absorption and reflection near the exceptional point of three-dimensional metamaterial

Authors: Yanjie Wu, Ding Zhang, Qiuyu Li, Hai Lin, Xintong Shi, Jie Xiong, Haoquan Hu, Jing Tian, Bian Wu, Y. Liu

Abstract: In recent years, particular physical phenomena enabled by non-Hermitian metamaterial systems have attracted significant research interests. In this paper, a non-Hermitian three-dimensional metamaterial near the exceptional point (EP) is proposed to demonstrate extremely asymmetric absorption and reflection. Unlike its conventional counterparts, this proposed metamaterial is constructed with a loss… ▽ More In recent years, particular physical phenomena enabled by non-Hermitian metamaterial systems have attracted significant research interests. In this paper, a non-Hermitian three-dimensional metamaterial near the exceptional point (EP) is proposed to demonstrate extremely asymmetric absorption and reflection. Unlike its conventional counterparts, this proposed metamaterial is constructed with a loss-assisted design. Localized losses are introduced into the structure by combining our technique of graphene-based resistive inks with conventional printed circuit board (PCB) process. Extremely asymmetric absorption and reflection near the EP are experimentally observed by tuning the loss between split ring resonators (SRRs) in the meta-atoms. Simultaneously, by linking the equivalent circuit model (ECM) with the Hamiltonian quantum physical model, the equivalent non-Hermitian Hamiltonian is obtained and a non-Hermitian transmission matrix is constructed. We show that tuning the structure and circuit parameters of the ECM produces a metamaterial system with EP response. Our system can be used in the design of asymmetric metamaterial absorbers. Our work lays down the way for the manipulation of EP to develop perfect absorption, sensing and other applications in the 3D metamaterial platform. △ Less

Submitted 23 January, 2024; v1 submitted 5 June, 2023; originally announced June 2023.

Numerical analysis and optimization of a hybrid layer structure for triplet-triplet fusion mechanism in organic light-emitting diodes

Authors: Jun-Yu Huang, Hsiao-Chun Hung, Kung-Chi Hsu, Chia-Hsun Chen, Pei-Hsi Lee, Hung-Yi Lin, Bo-Yen Lin, Man-kit Leung, Tien-Lung Chiu, Jiun-Haw Lee, Richard H. Friend, Yuh-Renn Wu

Abstract: In this study, we develop a steady state and time-dependent exciton diffusion model including singlet and triplet excitons coupled with a modified Poisson and drift-diffusion solver to explain the mechanism of hyper triplet-triplet fusion (TTF) organic light-emitting diodes (OLEDs). Using this modified simulator, we demonstrate various characteristics of OLEDs, including the J-V curve, internal qu… ▽ More In this study, we develop a steady state and time-dependent exciton diffusion model including singlet and triplet excitons coupled with a modified Poisson and drift-diffusion solver to explain the mechanism of hyper triplet-triplet fusion (TTF) organic light-emitting diodes (OLEDs). Using this modified simulator, we demonstrate various characteristics of OLEDs, including the J-V curve, internal quantum efficiency, transient spectrum, and electric profile. This solver can also be used to explain the mechanism of hyper-TTF-OLEDs and analyze the loss from different exciton mechanisms. Furthermore, we perform additional optimization of hyper-TTF-OLEDs that increases the internal quantum efficiency by approximately 33% (from 29% to 40%). △ Less

Submitted 31 May, 2023; originally announced May 2023.

Journal ref: Adv. Theory Simul. 2022, 2200633

Calibration of a Micromegas-based Gaseous Time Projection Chamber Using Cosmic Ray Muons

Authors: Wenming Zhang, Yuanchun Liu, Haiyan Du, Ke Han, Heng Lin, Tao Li, Lingyin Luo, Kaixiang Ni, Yunzhi Peng, Shaobo Wang, Sicheng Wen, Xiyu Yan, Zhiyong Zhang, Wenchang Zhai

Abstract: We report the calibration of a gaseous Time Projection Chamber based on Micromegas charge readout modules with cosmic ray muons, utilizing their penetrating power and relatively uniform energy deposition per unit length. Muon events were selected through track reconstruction to characterize detector performances, such as the drift velocity, electron lifetime, detector gain, and electric field dist… ▽ More We report the calibration of a gaseous Time Projection Chamber based on Micromegas charge readout modules with cosmic ray muons, utilizing their penetrating power and relatively uniform energy deposition per unit length. Muon events were selected through track reconstruction to characterize detector performances, such as the drift velocity, electron lifetime, detector gain, and electric field distortion. The evolution of detector performances with gas purities and electric drift fields over a 50-day data-taking cycle was measured by the muon calibration method. For instance, the drift velocity degraded with gas impurities from ${3.40\pm 0.07 ~ cm/μs}$ to ${3.06\pm 0.06 ~ cm/μs}$, and then recovered with gas purification. A ${^{137}Cs}$ calibration source was also placed inside the detector as a reference for muon calibrations. △ Less

Submitted 27 July, 2023; v1 submitted 16 May, 2023; originally announced May 2023.

Journal ref: Journal of Instrumentation, Volume 18, July 2023

Coherent perfect absorber and laser induced by directional emissions in the non-Hermitian photonic crystals

Authors: Zhifeng Li, Hai Lin, Rongxin Tang, Haitao Chen, Jiaru Tang, Rui Zhou, Jing Jin, Y. Liu

Abstract: In this study, we propose the application of non-Hermitian photonic crystals (PCs) with anisotropic emissions. Unlike a ring of exceptional points (EPs) in isotropic non-Hermitian PCs, the EPs of anisotropic non-Hermitian PCs appear as lines symmetrical about the $Γ$ point. The non-Hermitian Hamiltonian indicates that the formation of EPs is related to the non-Hermitian strength. The real spectrum… ▽ More In this study, we propose the application of non-Hermitian photonic crystals (PCs) with anisotropic emissions. Unlike a ring of exceptional points (EPs) in isotropic non-Hermitian PCs, the EPs of anisotropic non-Hermitian PCs appear as lines symmetrical about the $Γ$ point. The non-Hermitian Hamiltonian indicates that the formation of EPs is related to the non-Hermitian strength. The real spectrum appears in the $Γ$Y direction and has been validated as the complex conjugate medium (CCM) by effective medium theory (EMT). But for the $Γ$X direction, EMT indicates that the effective refractive index has a large imaginary part, which forms an evanescent wave inside the PCs. Thence, coherent perfect absorber (CPA) and laser effects can be achieved in the directional emission of the $Γ$Y. The outgoing wave in the $Γ$X direction is weak, which can significantly reduce the losses and electromagnetic interference caused by the leakage waves. Furthermore, the non-Hermitian PCs enable many fascinating applications such as signal amplification, collimation, and angle sensors. △ Less

Submitted 28 March, 2023; originally announced March 2023.

Comments: 11 pages, 11 figures

Experimental Simulation of Symmetry-Protected Higher-Order Exceptional Points with Single Photons

Authors: Kunkun Wang, Lei Xiao, Haiqing Lin, Wei Yi, Emil J. Bergholtz, Peng Xue

Abstract: Exceptional points (EPs) of non-Hermitian (NH) systems have recently attracted increasing attention due to their rich phenomenology and intriguing applications. Compared to the predominantly studied second-order EPs, higher-order EPs have been assumed to play a much less prominent role because they generically require the tuning of more parameters. Here we experimentally simulate two-dimensional t… ▽ More Exceptional points (EPs) of non-Hermitian (NH) systems have recently attracted increasing attention due to their rich phenomenology and intriguing applications. Compared to the predominantly studied second-order EPs, higher-order EPs have been assumed to play a much less prominent role because they generically require the tuning of more parameters. Here we experimentally simulate two-dimensional topological NH band structures using single-photon interferometry, and observe topologically stable third-order EPs obtained by tuning only two real parameters in the presence of symmetry. In particular, we explore how different symmetries stabilize qualitatively different third-order EPs: the parity-time symmetry leads to a generic cube-root dispersion, while a generalized chiral symmetry implies a square-root dispersion coexisting with a flat band. Additionally, we simulate fourfold degeneracies, composed of the non-defective twofold degeneracies and second-order EPs. Our work reveals the abundant and conceptually richer higher-order EPs protected by symmetries and offers a versatile platform for further research on topological NH systems. △ Less

Submitted 6 September, 2023; v1 submitted 21 March, 2023; originally announced March 2023.

Comments: 15 pages, 9 figures

Journal ref: Sci. Adv. 9, eadi0732 (2023)

Large and tunable magnetoresistance in van der Waals Ferromagnet/Semiconductor junctions

Authors: Wenkai Zhu, Yingmei Zhu, Tong Zhou, Xianpeng Zhang, Hailong Lin, Qirui Cui, Faguang Yan, Ziao Wang, Yongcheng Deng, Hongxin Yang, Lixia Zhao, Igor Žutić, Kirill D. Belashchenko, Kaiyou Wang

Abstract: Magnetic tunnel junctions (MTJs) with conventional bulk ferromagnets separated by a nonmagnetic insulating layer are key building blocks in spintronics for magnetic sensors and memory. A radically different approach of using atomically-thin van der Waals (vdW) materials in MTJs is expected to boost their figure of merit, the tunneling magnetoresistance (TMR), while relaxing the lattice-matching re… ▽ More Magnetic tunnel junctions (MTJs) with conventional bulk ferromagnets separated by a nonmagnetic insulating layer are key building blocks in spintronics for magnetic sensors and memory. A radically different approach of using atomically-thin van der Waals (vdW) materials in MTJs is expected to boost their figure of merit, the tunneling magnetoresistance (TMR), while relaxing the lattice-matching requirements from the epitaxial growth and supporting high-quality integration of dissimilar materials with atomically-sharp interfaces. We report TMR up to 192% at 10 K in all-vdW Fe3GeTe2/GaSe/Fe3GeTe2 MTJs. Remarkably, instead of the usual insulating spacer, this large TMR is realized with a vdW semiconductor GaSe. Integration of two-dimensional ferromagnets in semiconductor-based vdW junctions offers gate-tunability, bias dependence, magnetic proximity effects, and spin-dependent optical-selection rules. We demonstrate that not just the magnitude, but also the TMR sign is tuned by the applied bias or the semiconductor thickness, enabling modulation of highly spin-polarized carriers in vdW semiconductors. △ Less

Submitted 21 March, 2023; originally announced March 2023.

Journal ref: Nat Commun 14, 5371 (2023)

Generative Adversarial Networks for Scintillation Signal Simulation in EXO-200

Authors: S. Li, I. Ostrovskiy, Z. Li, L. Yang, S. Al Kharusi, G. Anton, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, M. Breidenbach, T. Brunner, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, T. Daniels, L. Darroch, S. J. Daugherty, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian , et al. (65 additional authors not shown)

Abstract: Generative Adversarial Networks trained on samples of simulated or actual events have been proposed as a way of generating large simulated datasets at a reduced computational cost. In this work, a novel approach to perform the simulation of photodetector signals from the time projection chamber of the EXO-200 experiment is demonstrated. The method is based on a Wasserstein Generative Adversarial N… ▽ More Generative Adversarial Networks trained on samples of simulated or actual events have been proposed as a way of generating large simulated datasets at a reduced computational cost. In this work, a novel approach to perform the simulation of photodetector signals from the time projection chamber of the EXO-200 experiment is demonstrated. The method is based on a Wasserstein Generative Adversarial Network - a deep learning technique allowing for implicit non-parametric estimation of the population distribution for a given set of objects. Our network is trained on real calibration data using raw scintillation waveforms as input. We find that it is able to produce high-quality simulated waveforms an order of magnitude faster than the traditional simulation approach and, importantly, generalize from the training sample and discern salient high-level features of the data. In particular, the network correctly deduces position dependency of scintillation light response in the detector and correctly recognizes dead photodetector channels. The network output is then integrated into the EXO-200 analysis framework to show that the standard EXO-200 reconstruction routine processes the simulated waveforms to produce energy distributions comparable to that of real waveforms. Finally, the remaining discrepancies and potential ways to improve the approach further are highlighted. △ Less

Submitted 8 May, 2023; v1 submitted 11 March, 2023; originally announced March 2023.

Comments: As accepted by JINST

Journal ref: JINST 18 P06005 2023

Breakdown effect of periodic perturbations to the robustness of topological phase in a gyromagnetic photonic crystal

Authors: Y. Tian, R. Zhou, Z. -R. Liu, Y. Liu, H. Lin, B. Zhou

Abstract: In the known field of topological photonics, what remains less so is the breakdown effect of topological phases deteriorated by perturbation. In this paper, we investigate the variance on topological invariants for a periodic Kekul{é} medium perturbed in unit cells, which was a gyromagnetic photonic crystal holding topological phases induced by \emph{synchronized rotation} of unit cells. Two param… ▽ More In the known field of topological photonics, what remains less so is the breakdown effect of topological phases deteriorated by perturbation. In this paper, we investigate the variance on topological invariants for a periodic Kekul{é} medium perturbed in unit cells, which was a gyromagnetic photonic crystal holding topological phases induced by \emph{synchronized rotation} of unit cells. Two parameters for geometric and material perturbation are respectively benchmarked to characterise the topological degradation. Our calculation demonstrates that such a periodic perturbation easily destructs the topological phase, and thus calls for further checkups on robustness under such unit-cell-perturbation in realization. △ Less

Submitted 25 September, 2023; v1 submitted 8 March, 2023; originally announced March 2023.

Comments: 9 pages, 6 figures, 1 table, accepted in IET Optoelectronics

Directional emission of nanoscale chiral sources modified by gap plasmons

Authors: Hai Lin, Te Wen, Jinglin Tang, Lulu Ye, Guanyu Zhang, Weidong Zhang, Ying Gu, Qihuang Gong, Guowei Lu

Abstract: Efficient manipulation of the emission direction of a chiral nanoscale light source is significant for information transmission and on-chip information processing. Here, we propose a scheme to control the directionality of nanoscale chiral light sources based on gap plasmons. The gap plasmon mode formed by a gold nanorod and a silver nanowire realizes the highly directional emission of chiral ligh… ▽ More Efficient manipulation of the emission direction of a chiral nanoscale light source is significant for information transmission and on-chip information processing. Here, we propose a scheme to control the directionality of nanoscale chiral light sources based on gap plasmons. The gap plasmon mode formed by a gold nanorod and a silver nanowire realizes the highly directional emission of chiral light sources. Based on the optical spin-locked light propagation, the hybrid structure enables the directional coupling of chiral emission to achieve a contrast ratio of 99.5%. The emission direction can be manipulated by tailoring the configuration of the structure, such as the positions, aspect ratios, and orientation of the nanorod. Besides, a great local field enhancement exists for highly enhanced emission rates within the nanogap. This chiral nanoscale light source manipulation scheme provides a way for chiral valleytronics and integrated photonics. △ Less

Submitted 8 February, 2023; originally announced February 2023.

Simultaneous magnetic and electric Purcell enhancement in a hybrid metal-dielectric nanostructure

Authors: Lingxiao Shan, Qi Liu, Yun Ma, Yali Jia, Hai Lin, Guowei Lu, Qihuang Gong, Ying Gu

Abstract: Hybrid metal-dielectric structures, which combine the advantages of both metal and dielectric materials, support high-confined but low-loss magnetic and electric resonances under deliberate arrangements. However, their potential for enhancing magnetic emission has not been explored. Here, we study the simultaneous magnetic and electric Purcell enhancement supported by a hybrid structure consisting… ▽ More Hybrid metal-dielectric structures, which combine the advantages of both metal and dielectric materials, support high-confined but low-loss magnetic and electric resonances under deliberate arrangements. However, their potential for enhancing magnetic emission has not been explored. Here, we study the simultaneous magnetic and electric Purcell enhancement supported by a hybrid structure consisting of a dielectric nanoring and a silver nanorod Such a structure enables low Ohmic loss and highly-confined field under the mode hybridization of magnetic resonances on nanoring and electric resonances on nanorod in the optical communication band. So, the 60-fold magnetic Purcell enhancement and 45-fold electric Purcell enhancement can be achieved simultaneously with $>95\%$ of the radiation transmitted to far field. The position of emitter has a several-ten-nanometer tolerance for sufficiently large Purcell enhancement, which brings convenience to experimental fabrications. Moreover, an array formed by this hybrid nanostructure can further enhance the magnetic Purcell factors. The findings provide a possibility to selectively excite the magnetic and electric emission in integrated photon circuits. It may also facilitate brighter magnetic emission sources and light-emitting metasurfaces in a simpler arrangement. △ Less

Submitted 30 January, 2023; originally announced January 2023.

Comments: 10 pages, 6 figures, submitted to Chin. Opt. Lett

Impact of Severe Plastic Deformation on Kinetics and Thermodynamics of Hydrogen Storage in Magnesium and Its Alloys

Authors: Kaveh Edalati, Etsuo Akiba, Walter J. Botta, Yuri Estrin, Ricardo Floriano, Daniel Fruchart, Thierry Grosdidier, Zenji Horita, Jacques Huot, Hai-Wen Li, Huai-Jun Lin, Adam Revesz, Michael J. Zehetbauer

Abstract: Magnesium and its alloys are the most investigated materials for solid-state hydrogen storage in the form of metal hydrides, but there are still unresolved problems with the kinetics and thermodynamics of hydrogenation and dehydrogenation of this group of materials. Severe plastic deformation (SPD) methods, such as equal-channel angular pressing (ECAP), high-pressure torsion (HPT), intensive rolli… ▽ More Magnesium and its alloys are the most investigated materials for solid-state hydrogen storage in the form of metal hydrides, but there are still unresolved problems with the kinetics and thermodynamics of hydrogenation and dehydrogenation of this group of materials. Severe plastic deformation (SPD) methods, such as equal-channel angular pressing (ECAP), high-pressure torsion (HPT), intensive rolling and fast forging, have been widely used to enhance the activation, air resistance, and hydrogenation/dehydrogenation kinetics of Mg-based hydrogen storage materials by introducing ultrafine/nanoscale grains and crystal lattice defects. These severely deformed materials, particularly in the presence of alloying additives or second-phase nanoparticles, can show not only fast hydrogen absorption/desorption kinetics but also good cycling stability. It was shown that some materials that are apparently inert to hydrogen can absorb hydrogen after SPD processing. Moreover, the SPD methods were effectively used for hydrogen binding-energy engineering and synthesizing new magnesium alloys with low thermodynamic stability for reversible low/room-temperature hydrogen storage, such as nanoglasses, high-entropy alloys, and metastable phases including the high-pressure γ-MgH2 polymorph. This article reviews recent advances in the development of Mg-based hydrogen storage materials by SPD processing and discusses their potential in future applications. △ Less

Submitted 7 January, 2023; originally announced January 2023.

Journal ref: Journal of Materials Science and Technology, Vol. 146, pp. 221-239, 2023

Many-body spin rotation by adiabatic passage in spin-1/2 XXZ chains of ultracold atoms

Authors: Ivana Dimitrova, Stuart Flannigan, Yoo Kyung Lee, Hanzhen Lin, Jesse Amato-Grill, Niklas Jepsen, Ieva Cepaite, Andrew J. Daley, Wolfgang Ketterle

Abstract: Quantum many-body phases offer unique properties and emergent phenomena, making them an active area of research. A promising approach for their experimental realization in model systems is to adiabatically follow the ground state of a quantum Hamiltonian from a product state of isolated particles to one that is strongly-correlated. Such protocols are relevant also more broadly in coherent quantum… ▽ More Quantum many-body phases offer unique properties and emergent phenomena, making them an active area of research. A promising approach for their experimental realization in model systems is to adiabatically follow the ground state of a quantum Hamiltonian from a product state of isolated particles to one that is strongly-correlated. Such protocols are relevant also more broadly in coherent quantum annealing and adiabatic quantum computing. Here we explore one such protocol in a system of ultracold atoms in an optical lattice. A fully magnetized state is connected to a correlated zero-magnetization state (an xy-ferromagnet) by a many-body spin rotation, realized by sweeping the detuning and power of a microwave field. The efficiency is characterized by applying a reverse sweep with a variable relative phase. We restore up to 50% of the original magnetization independent of the relative phase, evidence for the formation of correlations. The protocol is limited by the many-body gap of the final state, which is inversely proportional to system size, and technical noise. Our experimental and theoretical studies highlight the potential and challenges for adiabatic preparation protocols to prepare many-body eigenstates of spin Hamiltonians. △ Less

Submitted 31 December, 2022; originally announced January 2023.

Ground-based Synoptic Studies of the Sun

Authors: Sanjay Gosain, V. Martinez Pillet, A. Pevtsov, H. Gilbert, S. Gibson, A. G. de Wijn, J. Burkepile, A. Asai, H. M. Bain, C. J. Henney, Y. Katsukawa, H. Lin, W. Manchester, J. McAteer, K. Muglach, M. Rast, M. Roth, J. Zhang

Abstract: Ground-based synoptic solar observations provide critical contextual data used to model the large-scale state of the heliosphere. The next decade will see a combination of ground-based telescopes and space missions that will study our Sun's atmosphere microscopic processes with unprecedented detail. This white paper describes contextual observations from a ground-based network needed to fully expl… ▽ More Ground-based synoptic solar observations provide critical contextual data used to model the large-scale state of the heliosphere. The next decade will see a combination of ground-based telescopes and space missions that will study our Sun's atmosphere microscopic processes with unprecedented detail. This white paper describes contextual observations from a ground-based network needed to fully exploit this new knowledge of the underlying physics that leads to the magnetic linkages between the heliosphere and the Sun. This combination of a better understanding of small-scale processes and the appropriate global context will enable a physics-based approach to Space Weather comparable to Terrestrial Weather forecasting. △ Less

Submitted 18 February, 2023; v1 submitted 6 December, 2022; originally announced December 2022.

Comments: 10 pages, 5 figures, White paper submitted to Heliodecadal 2024, Category: Basic Research, Solar Physics. arXiv admin note: text overlap with arXiv:1903.06944 [updated version as submitted to Heliodecadal 2024]