-
Effect of non-local transport of hot electrons on the laser-target ablation
Authors:
Z. H. Chen,
X. H. Yang,
G. B. Zhang,
Y. Y. Ma,
H. Xu,
S. X. Luan,
J. Zhang
Abstract:
The non-local heat transport of hot electrons during high-intensity lasers interaction with plasmas can preheat the fuel and limit the heat flow in inertial confinement fusion. It increases the entropy of the fuel and decreases the final compression. In this paper, the non-local electron transport model that is based on the improved SNB algorithm has been embedded into the radiation hydrodynamic c…
▽ More
The non-local heat transport of hot electrons during high-intensity lasers interaction with plasmas can preheat the fuel and limit the heat flow in inertial confinement fusion. It increases the entropy of the fuel and decreases the final compression. In this paper, the non-local electron transport model that is based on the improved SNB algorithm has been embedded into the radiation hydrodynamic code and is benchmarked with two classical non-local transport cases. Then we studied a 2$ω$ laser ablating a CH target by using the non-local module. It is found that the non-local effect becomes significant when the laser intensity is above $1\times 10^{14} \mathrm{W/cm^{2}} $. The mass ablation rate from the SNB model is increased compared to that of the flux-limited model due to the lower coronal plasma temperature. This non-local model has a better agreement with the experimental results compared to that of the flux-limited model. The non-local transport is strongly dependent on the laser frequency, and the thresholds that the non-local transport should be considered are obtained for lasers of different frequencies. The appropriate flux-limiters that should be employed in the flux-limited model for different lasers are also presented. The results here should have a good reference for the laser-target ablation applications.
△ Less
Submitted 28 April, 2023;
originally announced April 2023.
-
On the correlation of earthquake occurrence among major fault zones in the eastern margin of the Tibetan Plateau by Big Data Analysis
Authors:
Zili Zhou,
Huai Zhang,
Huihong Cheng,
Chunlin Deng,
Yaolin Shi,
Shi Chen,
Xiwu Luan,
David A. Yuen
Abstract:
The subsequent series of responses to big events may exhibit a synchronicity of event number, frequency and energy release in different fault zones. This synchronicity is a reliable source for probing non-intuitive geological structures, assessing regional seismicity hazard map and even predicting the next big events. The synchronicity of main faults in the eastern margin of the Qinghai-Tibetan Pl…
▽ More
The subsequent series of responses to big events may exhibit a synchronicity of event number, frequency and energy release in different fault zones. This synchronicity is a reliable source for probing non-intuitive geological structures, assessing regional seismicity hazard map and even predicting the next big events. The synchronicity of main faults in the eastern margin of the Qinghai-Tibetan Plateau is still unknown to us. We propose to examine the correlation of earthquake occurrence among different fault zones to indicate this synchronicity, and to obtain a preliminary understanding of geodynamics processes and the unrecognized characteristics of deep evolution in the eastern margin of the Qinghai-Tibetan Plateau. We estimate temporal changes of completeness level, frequency seismicity, and intensity seismicity, referring respectively to Mc, Z, and E values, of 21 main fault zones, using a seismic catalogue from 1970 to 2015. Our results reveal that six fault zone pairs of fault zones exhibit relative high correlation (>0.6) by all three indicators, while four fault zone pairs are non-adjacent with close internal affinity offsetting the limit of spatial distance, such as the pair of Rongjing-mabian fault and Minjiang-huya fault. Most strikingly, some fault zone pairs showing typical high correlation (>0.8) of seismicity frequency or seismicity intensity, the faults surprisingly belong to neither the same seismic belt nor the same geological block, exhibiting a regional scale remote triggering pattern of earthquakes or structures. An embryonic pattern to predict the next possible events will also be presented. This correlation analysis discovers a previously unrecognized strong coupling relationship among main faults with high earthquake risk in the eastern margin of the Qinghai-Tibetan Plateau.
△ Less
Submitted 15 November, 2020;
originally announced November 2020.
-
Coupling of Light and Mechanics in a Photonic Crystal Waveguide
Authors:
J. -B. Béguin,
Z. Qin,
X. Luan,
H. J. Kimble
Abstract:
Observations of thermally driven transverse vibration of a photonic crystal waveguide (PCW) are reported. The PCW consists of two parallel nanobeams with a 240 nm vacuum gap between the beams. Models are developed and validated for the transduction of beam motion to phase and amplitude modulation of a weak optical probe propagating in a guided mode (GM) of the PCW for probe frequencies far from an…
▽ More
Observations of thermally driven transverse vibration of a photonic crystal waveguide (PCW) are reported. The PCW consists of two parallel nanobeams with a 240 nm vacuum gap between the beams. Models are developed and validated for the transduction of beam motion to phase and amplitude modulation of a weak optical probe propagating in a guided mode (GM) of the PCW for probe frequencies far from and near to the dielectric band edge. Since our PCW has been designed for near-field atom trapping, this research provides a foundation for evaluating possible deleterious effects of thermal motion on optical atomic traps near the surfaces of PCWs. Longer term goals are to achieve strong atom-mediated links between individual phonons of vibration and single photons propagating in the GMs of the PCW, thereby enabling opto-mechanics at the quantum level with atoms, photons, and phonons. The experiments and models reported here provide a basis for assessing such goals, including sensing mechanical motion at the Standard Quantum Limit (SQL).
△ Less
Submitted 25 July, 2020;
originally announced July 2020.
-
The integration of photonic crystal waveguides with atom arrays in optical tweezers
Authors:
X. Luan,
J. -B. Béguin,
A. P. Burgers,
Z. Qin,
S. -P. Yu,
H. J. Kimble
Abstract:
Integrating nanophotonics and cold atoms has drawn increasing interest in recent years due to diverse applications in quantum information science and the exploration of quantum many-body physics. For example, dispersion-engineered photonic crystal waveguides (PCWs) permit not only stable trapping and probing of ultracold neutral atoms via interactions with guided-mode light, but also the possibili…
▽ More
Integrating nanophotonics and cold atoms has drawn increasing interest in recent years due to diverse applications in quantum information science and the exploration of quantum many-body physics. For example, dispersion-engineered photonic crystal waveguides (PCWs) permit not only stable trapping and probing of ultracold neutral atoms via interactions with guided-mode light, but also the possibility to explore the physics of strong, photon-mediated interactions between atoms, as well as atom-mediated interactions between photons. While diverse theoretical opportunities involving atoms and photons in 1-D and 2-D nanophotonic lattices have been analyzed, a grand challenge remains the experimental integration of PCWs with ultracold atoms. Here we describe an advanced apparatus that overcomes several significant barriers to current experimental progress with the goal of achieving strong quantum interactions of light and matter by way of single-atom tweezer arrays strongly coupled to photons in 1-D and 2-D PCWs. Principal technical advances relate to efficient free-space coupling of light to and from guided modes of PCWs, silicate bonding of silicon chips within small glass vacuum cells, and deterministic, mechanical delivery of single-atom tweezer arrays to the near fields of photonic crystal waveguides.
△ Less
Submitted 2 March, 2020;
originally announced March 2020.
-
Reduced volume and reflection for bright optical tweezers with radial Laguerre-Gauss beams
Authors:
J. -B. Béguin,
J. Laurat,
X. Luan,
A. P. Burgers,
Z. Qin,
H. J. Kimble
Abstract:
Spatially structured light has opened a wide range of opportunities for enhanced imaging as well as optical manipulation and particle confinement. Here, we show that phase-coherent illumination with superpositions of radial Laguerre-Gauss (LG) beams provides improved localization for bright optical tweezer traps, with narrowed radial and axial intensity distributions. Further, the Gouy phase shift…
▽ More
Spatially structured light has opened a wide range of opportunities for enhanced imaging as well as optical manipulation and particle confinement. Here, we show that phase-coherent illumination with superpositions of radial Laguerre-Gauss (LG) beams provides improved localization for bright optical tweezer traps, with narrowed radial and axial intensity distributions. Further, the Gouy phase shifts for sums of tightly focused radial LG fields can be exploited for novel phase-contrast strategies at the wavelength scale. One example developed here is the suppression of interference fringes from reflection near nano-dielectric surfaces, with the promise of improved cold-atom delivery and manipulation.
△ Less
Submitted 12 August, 2020; v1 submitted 30 January, 2020;
originally announced January 2020.
-
An advanced apparatus for the integration of nanophotonics and cold atoms
Authors:
J. -B. Béguin,
A. P. Burgers,
X. Luan,
Z. Qin,
S. P. Yu,
H. J. Kimble
Abstract:
We combine nanophotonics and cold atom research in a new apparatus enabling the delivery of single-atom tweezer arrays in the vicinity of photonic crystal waveguides.
We combine nanophotonics and cold atom research in a new apparatus enabling the delivery of single-atom tweezer arrays in the vicinity of photonic crystal waveguides.
△ Less
Submitted 4 December, 2019;
originally announced December 2019.
-
The controllable super-high energetic electrons by external magnetic fields at relativistic laser-solid interactions in the presence of large scale pre-plasmas
Authors:
D. Wu,
S. I. Krasheninnikov,
S. X. Luan,
W. Yu
Abstract:
The two stage electron acceleration model [arXiv: 1512.02411 and arXiv: 1512.07546] is extended to the study of laser magnetized-plasmas interactions at relativistic intensities and in the presence of large-scale preformed plasmas. It is shown that the cut-off electron kinetic energy is controllable by the external magnetic field strength and directions. Further studies indicate that for a right-h…
▽ More
The two stage electron acceleration model [arXiv: 1512.02411 and arXiv: 1512.07546] is extended to the study of laser magnetized-plasmas interactions at relativistic intensities and in the presence of large-scale preformed plasmas. It is shown that the cut-off electron kinetic energy is controllable by the external magnetic field strength and directions. Further studies indicate that for a right-hand circularly polarized laser (RH-CP) of intensity $10^{20}\ \text{W}/\text{cm}^2$ and pre-plasma scale length $10\ μ\text{m}$, the cut-off electron kinetic energy can be as high as $500\ \text{MeV}$, when a homogeneous external magnetic field of exceeding $10000\ \text{T}$ (or $B=ω_{c}/ω_0>1$) is loaded along the laser propagation direction, which is a significant increase compared with that $120\ \text{MeV}$ without external magnetic field. A laser front sharpening mechanism is identified at relativistic laser magnetized-plasmas interactions with $B=ω_{c}/ω_0>1$, which is responsible for these super-high energetic electrons.
△ Less
Submitted 28 February, 2016;
originally announced February 2016.
-
The generation of unexpected super-high energetic electrons at relativistic circularly polarized laser-solid interactions in the presence of large scale pre-plasmas
Authors:
D. Wu,
S. I. Krasheninnikov,
S. X. Luan,
W. Yu
Abstract:
As an extension of the previous work [arXiv: 1512.02411], we have investigated the role of circularly polarized (CP) laser pulses while keeping other conditions the same. It is found that in the presence of large scale pre-formed plasmas, super-high energetic electrons can be generated at relativistic CP laser-solid interactions. For laser of intensity $10^{20}\ \text{W}/\text{cm}^2$ and pre-plasm…
▽ More
As an extension of the previous work [arXiv: 1512.02411], we have investigated the role of circularly polarized (CP) laser pulses while keeping other conditions the same. It is found that in the presence of large scale pre-formed plasmas, super-high energetic electrons can be generated at relativistic CP laser-solid interactions. For laser of intensity $10^{20}\ \text{W}/\text{cm}^2$ and pre-plasma scale-length $10\ μ\text{m}$, the cut-off energy of electron by CP laser is $120\ \text{MeV}$ compared with $100\ \text{MeV}$ in the case of linearly polarized (LP) laser. The unexpected super-high energetic electron acceleration can also be explained by the two-stage acceleration model, {by taking into account the envelop modulation effects of the reflected CP laser pulse.} The underlying physics of this envelop modulation is figured out, and a modified first-stage electron acceleration scaling law in the presence of the modulated-CP laser is also obtained.
△ Less
Submitted 23 February, 2016; v1 submitted 23 December, 2015;
originally announced December 2015.
-
Identifying the source of super-high energetic electrons in the presence of pre-plasma in laser-matter interaction at relativistic intensities
Authors:
D. Wu,
S. I. Krasheninnikov,
S. X. Luan,
W. Yu
Abstract:
The generation of super-high energetic electrons influenced by pre-plasma at relativistic intensity laser-matter interaction is studied in a one-dimensional slab approximation with particle-in-cell simulations. Different pre-plasma scale-lengths of $1\ μ\text{m}$, $5\ μ\text{m}$, $10\ μ\text{m}$ and $15\ μ\text{m}$ are considered, showing an increase in both particle number and cut-off kinetic ene…
▽ More
The generation of super-high energetic electrons influenced by pre-plasma at relativistic intensity laser-matter interaction is studied in a one-dimensional slab approximation with particle-in-cell simulations. Different pre-plasma scale-lengths of $1\ μ\text{m}$, $5\ μ\text{m}$, $10\ μ\text{m}$ and $15\ μ\text{m}$ are considered, showing an increase in both particle number and cut-off kinetic energy of electrons with the increase of pre-plasma scale-length, and the cut-off kinetic energy greatly exceeding the corresponding laser ponderomotive energy. A two-stage electron acceleration model is proposed to explain the underlying physics. The first stage is attributed to the synergetic acceleration by longitudinal electric field and laser pulse, with its efficiency depending on the pre-plasma scale-length. These electrons pre-accelerated in the first stage could build up an intense electrostatic potential barrier with its maximal value several times as large of the initial electron kinetic energy. Part of energetic electrons could be further accelerated by the reflection off the electrostatic potential barrier, with their finial kinetic energies significantly higher than the values pre-accelerated in the first stage.
△ Less
Submitted 23 December, 2015; v1 submitted 8 December, 2015;
originally announced December 2015.
-
Phonon routing in integrated optomechanical cavity-waveguide systems
Authors:
Kejie Fang,
Matthew H. Matheny,
Xingsheng Luan,
Oskar Painter
Abstract:
The mechanical properties of light have found widespread use in the manipulation of gas-phase atoms and ions, helping create new states of matter and realize complex quantum interactions. The field of cavity-optomechanics strives to scale this interaction to much larger, even human-sized mechanical objects. Going beyond the canonical Fabry-Perot cavity with a movable mirror, here we explore a new…
▽ More
The mechanical properties of light have found widespread use in the manipulation of gas-phase atoms and ions, helping create new states of matter and realize complex quantum interactions. The field of cavity-optomechanics strives to scale this interaction to much larger, even human-sized mechanical objects. Going beyond the canonical Fabry-Perot cavity with a movable mirror, here we explore a new paradigm in which multiple cavity-optomechanical elements are wired together to form optomechanical circuits. Using a pair of optomechanical cavities coupled together via a phonon waveguide we demonstrate a tunable delay and filter for microwave-over-optical signal processing. In addition, we realize a tight-binding form of mechanical coupling between distant optomechanical cavities, leading to direct phonon exchange without dissipation in the waveguide. These measurements indicate the feasibility of phonon-routing based information processing in optomechanical crystal circuitry, and further, to the possibility of realizing topological phases of photons and phonons in optomechanical cavity lattices.
△ Less
Submitted 20 August, 2015;
originally announced August 2015.
-
Optomechanically-induced-transparency cooling of massive mechanical resonators to the quantum ground state
Authors:
Yong-Chun Liu,
Yun-Feng Xiao,
Xingsheng Luan,
Chee Wei Wong
Abstract:
Ground state cooling of massive mechanical objects remains a difficult task restricted by the unresolved mechanical sidebands. We propose an optomechanically-induced-transparency cooling scheme to achieve ground state cooling of mechanical motion without the resolved sideband condition in a pure optomechanical system with two mechanical modes coupled to the same optical cavity mode. We show that g…
▽ More
Ground state cooling of massive mechanical objects remains a difficult task restricted by the unresolved mechanical sidebands. We propose an optomechanically-induced-transparency cooling scheme to achieve ground state cooling of mechanical motion without the resolved sideband condition in a pure optomechanical system with two mechanical modes coupled to the same optical cavity mode. We show that ground state cooling is achievable for sideband resolution $ω_{m}/κ$ as low as 0.003. This provides a new route for quantum manipulation of massive macroscopic devices and high-precision measurements.
△ Less
Submitted 17 April, 2015;
originally announced April 2015.
-
An integrated low phase noise radiation-pressure-driven optomechanical oscillator chipset
Authors:
X. Luan,
Y. Huang,
Y. Li,
J. F. McMillan,
J. Zheng,
S. -W. Huang,
P. -C. Hsieh,
T. Gu,
D. Wang,
A. Hati,
D. A. Howe,
G. Wen,
M. Yu,
G. Lo,
D. -L. Kwong,
C. W. Wong
Abstract:
High-quality frequency references are the cornerstones in position, navigation and timing applications of both scientific and commercial domains. Optomechanical oscillators, with direct coupling to continuous-wave light and non-material-limited f Q product, are long regarded as a potential platform for frequency reference in radio-frequency-photonic architectures. However, one major challenge is t…
▽ More
High-quality frequency references are the cornerstones in position, navigation and timing applications of both scientific and commercial domains. Optomechanical oscillators, with direct coupling to continuous-wave light and non-material-limited f Q product, are long regarded as a potential platform for frequency reference in radio-frequency-photonic architectures. However, one major challenge is the compatibility with standard CMOS fabrication processes while maintaining optomechanical high quality performance. Here we demonstrate the monolithic integration of photonic crystal optomechanical oscillators and on-chip high speed Ge detectors based on the silicon CMOS platform. With the generation of both high harmonics (up to 59th order) and subharmonics (down to 1/4), our chipset provides multiple frequency tones for applications in both frequency multipliers and dividers. The phase noise is measured down to -125 dBc/Hz at 10 kHz offset at ~ 400 μW dropped-in powers, one of the lowest noise optomechanical oscillators to date and in room-temperature and atmospheric non-vacuum operating conditions. These characteristics enable optomechanical oscillators as a frequency reference platform for radio-frequency-photonic information processing.
△ Less
Submitted 21 October, 2014;
originally announced October 2014.
-
Coherent polariton dynamics in coupled highly-dissipative cavity quantum electrodynamics
Authors:
Yong-Chun Liu,
Xingsheng Luan,
Hao-Kun Li,
Qihuang Gong,
Chee Wei Wong,
Yun-Feng Xiao
Abstract:
Coherent light-matter interaction at the single photon and electronic qubit level promises the remarkable potential for nonclassical information processing. Against the efforts of improving the figure of merit of the cavities, here we demonstrate strong anharmonicity in the polariton dressed states via dark state resonances in a highly dissipative cavity. It is shown that vacuum Rabi oscillation o…
▽ More
Coherent light-matter interaction at the single photon and electronic qubit level promises the remarkable potential for nonclassical information processing. Against the efforts of improving the figure of merit of the cavities, here we demonstrate strong anharmonicity in the polariton dressed states via dark state resonances in a highly dissipative cavity. It is shown that vacuum Rabi oscillation occurs for a single quantum emitter inside a cavity even with bosonic decay-to-interaction rate ratio exceeding $10^{2}$, when the photon field is coupled to an auxiliary high-$Q$ cavity. Moreover, photon blockade is observable in such a highly-dissipative cavity quantum electrodynamics system. This study provides a promising platform for overcoming decoherence and advancing the coherent manipulation of polariton qubits.
△ Less
Submitted 14 May, 2014;
originally announced May 2014.
-
Dynamic dissipative cooling of a mechanical oscillator in strong-coupling optomechanics
Authors:
Yong-Chun Liu,
Yun-Feng Xiao,
Xingsheng Luan,
Chee Wei Wong
Abstract:
Cooling of mesoscopic mechanical resonators represents a primary concern in cavity optomechanics. Here in the strong optomechanical coupling regime, we propose to dynamically control the cavity dissipation, which is able to significantly accelerate the cooling process while strongly suppressing the heating noise. Furthermore, the dynamic control is capable of overcoming quantum backaction and redu…
▽ More
Cooling of mesoscopic mechanical resonators represents a primary concern in cavity optomechanics. Here in the strong optomechanical coupling regime, we propose to dynamically control the cavity dissipation, which is able to significantly accelerate the cooling process while strongly suppressing the heating noise. Furthermore, the dynamic control is capable of overcoming quantum backaction and reducing the cooling limit by several orders of magnitude. The dynamic dissipation control provides new insights for tailoring the optomechanical interaction and offers the prospect of exploring macroscopic quantum physics.
△ Less
Submitted 14 March, 2013;
originally announced March 2013.
-
Feedback and harmonic locking of slot-type optomechanical oscillators to external low-noise reference clocks
Authors:
Jiangjun Zheng,
Ying Li,
Noam Goldberg,
Mickey McDonald,
Xingsheng Luan,
Archita Hati,
Ming Lu,
Stefan Strauf,
Tanya Zelevinsky,
David A. Howe,
Chee Wei Wong
Abstract:
We demonstrate feedback and harmonic locking of chip-scale slot-type optomechanical oscillators to external low-noise reference clocks, with suppressed timing jitter by three orders of magnitude. The feedback and compensation techniques significantly reduce the close-to-carrier phase noise, especially within the locking bandwidth for the integral root-mean-square timing jitter. Harmonic locking vi…
▽ More
We demonstrate feedback and harmonic locking of chip-scale slot-type optomechanical oscillators to external low-noise reference clocks, with suppressed timing jitter by three orders of magnitude. The feedback and compensation techniques significantly reduce the close-to-carrier phase noise, especially within the locking bandwidth for the integral root-mean-square timing jitter. Harmonic locking via high-order carrier signals is also demonstrated with similar phase noise and integrated root-mean-square timing jitter reduction. The chip-scale optomechanical oscillators are tunable over an 80-kHz range by tracking the reference clock, with potential applications in tunable radio-frequency photonics platforms.
△ Less
Submitted 8 March, 2013;
originally announced March 2013.