-
Numerical simulation of charging up, accumulation of space charge and formation of discharges
Authors:
Purba Bhattacharya,
Promita Roy,
Tanay Dey,
Jaydeep Datta,
Prasant K. Rout,
Nayana Majumdar,
Supratik Mukhopadhyay
Abstract:
Aging and stability of gaseous ionization detectors are intricately related to charging up, accumulation of space charge and formation of discharges. All these phenomena, in their turn, depend on the dynamics of charged particles within the device. Because of the large number of particles involved and their complex interactions, the dynamic processes of generation and loss of charged particles, an…
▽ More
Aging and stability of gaseous ionization detectors are intricately related to charging up, accumulation of space charge and formation of discharges. All these phenomena, in their turn, depend on the dynamics of charged particles within the device. Because of the large number of particles involved and their complex interactions, the dynamic processes of generation and loss of charged particles, and their transport within the detector volume are extremely expensive to simulate numerically. In this work, we propose and evaluate possible algorithms / approaches that show some promise in relation to the above-mentioned problems. Several important ionization detectors having parallel plate configurations, such as GEM, Micromegas, RPCs and THGEMs, are considered for this purpose. Information related to primary ionization is obtained from HEED, while all the transport properties are evaluated using MAGBOLTZ. The transport dynamics have been followed using two different approaches. In one, particle description using neBEM-Garfield++ combination has been used. For this purpose, the neBEM solver has been significantly improved such that perturbations due to the charged particles present within the device are considered while estimating electric field. In the other approach, the transport is simulated following hydrodynamic model using COMSOL during which the electric field is also provided by COMSOL where it is easy to set up space charge effects. A comparison between these possible approaches will be presented. Effect of different simulation parameters will also be demonstrated using simple examples.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Work Distribution for Unzipping Processes
Authors:
P. Werner,
A. K. Hartmann,
S. N. Majumdar
Abstract:
A simple zipper model is introduced, representing in a simplified way, e.g., the folded DNA double helix or hairpin structures in RNA. The double stranded hairpin is connected to a heat bath at temperature $T$ and subject to an external force $f$, which couples to the free length $L$ of the unzipped sequence. Increasing the force, leads to an zipping/unzipping first-order phase transition at a cri…
▽ More
A simple zipper model is introduced, representing in a simplified way, e.g., the folded DNA double helix or hairpin structures in RNA. The double stranded hairpin is connected to a heat bath at temperature $T$ and subject to an external force $f$, which couples to the free length $L$ of the unzipped sequence. Increasing the force, leads to an zipping/unzipping first-order phase transition at a critical force $f_c(T)$ in the thermodynamic limit of a very large chain. We compute analytically, as a function of temperature $T$ and force $f$, the full distribution $P(L)$ of free lengths in the thermodynamic limit and show that it is qualitatively very different for $f<f_c$, $f=f_c$ and $f>f_c$. Next we consider quasistatic work processes where the force is incremented according to a linear protocol. Having obtained $P(L)$ already allows us to derive an analytical expression for the work distribution $P(W)$ in the zipped phase $f<f_c$ for a long chain. We compute the large-deviation tails of the work distribution explicitly. Our analytical result for the work distribution is compared over a large range of the support down to probabilities as small as $10^{-200}$ with numerical simulations, which were performed by applying sophisticated large-deviation algorithms.
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
Data acquisition system for muon tracking in a muon scattering tomography setup
Authors:
Subhendu Das,
Sridhar Tripathy,
Jaydeep Datta,
Sandip Sarkar,
Nayana Majumdar,
Supratik Mukhopadhyay
Abstract:
We report here the development of a multi-channel DAQ system for muon tracking in a muon scattering tomography setup. The salient features of the proposed DAQ system are direct acquisition and processing of LVDS signals, 500 MHz sampling frequency and scalability. It consists of front-end electronics stage built around NINO ASIC. The back-end electronics is configured with Intel/Altera MAX-10 FPGA…
▽ More
We report here the development of a multi-channel DAQ system for muon tracking in a muon scattering tomography setup. The salient features of the proposed DAQ system are direct acquisition and processing of LVDS signals, 500 MHz sampling frequency and scalability. It consists of front-end electronics stage built around NINO ASIC. The back-end electronics is configured with Intel/Altera MAX-10 FPGA development board which transmits data to the storage following UART protocol. The proposed DAQ system has been tested for its performance using a position sensitive glass RPC detector with two-dimensional 8X8 readout strip configuration.
△ Less
Submitted 27 May, 2023;
originally announced May 2023.
-
Singular relaxation of a random walk in a box with a Metropolis Monte Carlo dynamics
Authors:
Alexei D. Chepelianskii,
Satya N. Majumdar,
Hendrik Schawe,
Emmanuel Trizac
Abstract:
We study analytically the relaxation eigenmodes of a simple Monte Carlo algorithm, corresponding to a particle in a box which moves by uniform random jumps. Moves outside of the box are rejected. At long times, the system approaches the equilibrium probability density, which is uniform inside the box. We show that the relaxation towards this equilibrium is unusual: for a jump length comparable to…
▽ More
We study analytically the relaxation eigenmodes of a simple Monte Carlo algorithm, corresponding to a particle in a box which moves by uniform random jumps. Moves outside of the box are rejected. At long times, the system approaches the equilibrium probability density, which is uniform inside the box. We show that the relaxation towards this equilibrium is unusual: for a jump length comparable to the size of the box, the number of relaxation eigenmodes can be surprisingly small, one or two. We provide a complete analytic description of the transition between these two regimes. When only a single relaxation eigenmode is present, a suitable choice of the symmetry of the initial conditions gives a localizing decay to equilibrium. In this case, the deviation from equilibrium concentrates at the edges of the box where the rejection probability is maximal. Finally, in addition to the relaxation analysis of the master equation, we also describe the full eigen-spectrum of the master equation including its sub-leading eigen-modes.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Determination of charge spread, position resolution, energy resolution and gain uniformity of Gas Electron Multipliers (GEM)
Authors:
Vishal Kumar,
Subhendu Das,
Promita Roy,
Purba Bhattacharyab,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar
Abstract:
Gas electron multipliers (GEM) detectors are gaseous detectors widely used for tracking and imaging applications due to their good position resolution, high efficiency at high irradiation rates, among other factors. In the present work, position resolution, charge spread, energy resolution and gain uniformity have been investigated experimentally for single and double GEM geometries using an Fe-55…
▽ More
Gas electron multipliers (GEM) detectors are gaseous detectors widely used for tracking and imaging applications due to their good position resolution, high efficiency at high irradiation rates, among other factors. In the present work, position resolution, charge spread, energy resolution and gain uniformity have been investigated experimentally for single and double GEM geometries using an Fe-55 source. The position resolution measurements have been performed by a novel method, using a high precision instrument for source movement and is found to be highly successful. The result shows that the double GEM can resolve positions with sigma values up to 36.8 micron and 54.6 micron in x and y directions, respectively. To validate the experimental results, a Garfield simulation work has been carried out on charge spread.
△ Less
Submitted 10 March, 2023;
originally announced March 2023.
-
Numerical simulation of the response of single gap timing RPCs with the space charge effects and Garfield++
Authors:
Tanay Dey,
Purba Bhattacharya,
Supratik Mukhopadhyay,
Nayana Majumdar,
Abhishek Seal,
Subhasis Chattopadhyay
Abstract:
In this article, we report the simulated response of timing RPCs of different gas gaps. A 3D Montecarlo code was developed and integrated with Garfield++ to simulate the avalanche processes with space charge effects which allow actual charge and timing spectrums. The results of this study are presented with examples of timing RPCs of gas gaps 0.02 cm and 0.03 cm.
In this article, we report the simulated response of timing RPCs of different gas gaps. A 3D Montecarlo code was developed and integrated with Garfield++ to simulate the avalanche processes with space charge effects which allow actual charge and timing spectrums. The results of this study are presented with examples of timing RPCs of gas gaps 0.02 cm and 0.03 cm.
△ Less
Submitted 10 December, 2022;
originally announced December 2022.
-
Parallelization of Garfield++ and neBEM to simulate space charge effects in RPCs
Authors:
Tanay Dey,
Purba Bhattacharya,
Supratik Mukhopadhyay,
Nayana Majumdar,
Abhishek Seal,
Subhasis Chattopadhyay
Abstract:
Numerical simulation of avalanches, saturated avalanches, and streamers can help us understand the detector physics of Resistive Plate Chambers (RPC). 3D Monte Carlo simulation of an avalanche inside an RPC, the transition from avalanche to saturated avalanche to streamer may help the search for the optimum voltage and alternate gas mixtures. This task is dauntingly resource-hungry, especially whe…
▽ More
Numerical simulation of avalanches, saturated avalanches, and streamers can help us understand the detector physics of Resistive Plate Chambers (RPC). 3D Monte Carlo simulation of an avalanche inside an RPC, the transition from avalanche to saturated avalanche to streamer may help the search for the optimum voltage and alternate gas mixtures. This task is dauntingly resource-hungry, especially when space charge effects become important, which often coincides with important regimes of operation of these devices. By modifying the electric field inside the RPC dynamically, the space charge plays a crucial role in determining the response of the detector. In this work, a numerical model has been proposed to calculate the dynamic space-charge field inside an RPC and the same has been implemented in the Garfield++ framework. By modeling space charge as the large number of line charges and using the multithreading technique OpenMP to calculate electric field, drift line, electron gain, and space charge field, it has been possible to maintain time consumption within reasonable limits. For this purpose, a new class, pAvalancheMC has been introduced in Garfield++. The calculations have been successfully verified with those from existing solvers and an example is provided to show the performance of pAvalancheMC. Moreover, the details of the transition of an avalanche into a saturated avalanche have been discussed. The induced charge distribution is calculated for a timing RPC and results are verified with the experiment.
△ Less
Submitted 5 October, 2023; v1 submitted 11 November, 2022;
originally announced November 2022.
-
Design and studies of thick Gas Electron Multipliers fabricated in India
Authors:
Promita Roy,
Purba Bhattacharya,
Vishal Kumar,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar
Abstract:
THick Gas Electron Multipliers (THGEMs) are robust and high gain Micro Pattern Gaseous Detectors which are economically manufactured by standard drilling and etching of thin printed circuit boards. In this paper, we present our recent simulation as well as experimental studies on THGEMs which have been fabricated in India using local expertise. Two types of THGEMs have been fabricated; one set has…
▽ More
THick Gas Electron Multipliers (THGEMs) are robust and high gain Micro Pattern Gaseous Detectors which are economically manufactured by standard drilling and etching of thin printed circuit boards. In this paper, we present our recent simulation as well as experimental studies on THGEMs which have been fabricated in India using local expertise. Two types of THGEMs have been fabricated; one set has holes without any external rim and another set has holes with rims. These detectors have been characterized using argon-carbon dioxide and argon-isobutane gas mixtures. Electron transmission, effective gain, energy resolution and optimized working range studies have been presented for both the sets of THGEMs.
△ Less
Submitted 17 December, 2022; v1 submitted 19 October, 2022;
originally announced October 2022.
-
Study of space charge phenomena in GEM-based detectors
Authors:
Promita Roy,
Prasant Kumar Rout,
Jaydeep Datta,
Purba Bhattacharya,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar
Abstract:
Space charge accumulation within GEM holes is one of the vital phenomena which affects many of the key working parameters of the detector. This accumulation is found to be significantly affected by the initial primary charge configurations and applied GEM voltages since they determine charge sharing and the subsequent evolution of detector response. In this work, we have studied the effects of spa…
▽ More
Space charge accumulation within GEM holes is one of the vital phenomena which affects many of the key working parameters of the detector. This accumulation is found to be significantly affected by the initial primary charge configurations and applied GEM voltages since they determine charge sharing and the subsequent evolution of detector response. In this work, we have studied the effects of space charge phenomena on different parameters for single GEM detectors using a hybrid numerical model.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
A Novel Readout Scheme for Muon Tomography Application in Material Identification
Authors:
Subhendu Das,
Sridhar Tripathy,
Sandip Sarkar,
Nayana Majumdar,
Supratik Mukhopadhyay
Abstract:
This work reports a cost-effective, multi-parameter readout and data-acquisition system for a muon scattering tomography system based on Resistive Plate Chambers (RPCs). Initial test measurements with a prototype Resistive Plate Chamber were performed using a low-cost FPGA coupled to the NINO ASIC for the event selection and handling data. The Time over-Threshold (TOT) property of NINO ASICs has b…
▽ More
This work reports a cost-effective, multi-parameter readout and data-acquisition system for a muon scattering tomography system based on Resistive Plate Chambers (RPCs). Initial test measurements with a prototype Resistive Plate Chamber were performed using a low-cost FPGA coupled to the NINO ASIC for the event selection and handling data. The Time over-Threshold (TOT) property of NINO ASICs has been used to achieve better position information and achieve precise tracking capability. In our test setup, we try to build an imaging setup using a single RPC and lead block, which covers some areas of RPC. A glass RPC of dimension 30cm x 30cm, filled with a gas mixture of 95% Freon and 5% Isobutane, equipped with two orthogonal panels of readout strips of width 3 cm and pitch 3.2 cm, has been operated.
△ Less
Submitted 31 May, 2022;
originally announced May 2022.
-
Double-hit separation and dE/dx resolution of a time projection chamber with GEM readout
Authors:
Yumi Aoki,
David Attié,
Ties Behnke,
Alain Bellerive,
Oleg Bezshyyko,
Deb Bhattacharya Sankar,
Purba Bhattacharya,
Sudeb Bhattacharya,
Yue Chang,
Paul Colas,
Gilles De Lentdecker,
Klaus Dehmelt,
Klaus Desch,
Ralf Diener,
Madhu Dixit,
Ulrich Einhaus,
Oleksiy Fedorchuk,
Ivor Fleck,
Keisuke Fujii,
Takahiro Fusayasu,
Serguei Ganjour,
Philippe Gros,
Peter Hayman,
Katsumasa Ikematsu,
Leif Jönsson
, et al. (46 additional authors not shown)
Abstract:
A time projection chamber (TPC) with micropattern gaseous detector (MPGD) readout is investigated as main tracking device of the International Large Detector (ILD) concept at the planned International Linear Collider (ILC). A prototype TPC equipped with a triple gas electron multiplier (GEM) readout has been built and operated in an electron test beam. The TPC was placed in a 1 T solenoidal field…
▽ More
A time projection chamber (TPC) with micropattern gaseous detector (MPGD) readout is investigated as main tracking device of the International Large Detector (ILD) concept at the planned International Linear Collider (ILC). A prototype TPC equipped with a triple gas electron multiplier (GEM) readout has been built and operated in an electron test beam. The TPC was placed in a 1 T solenoidal field at the DESY II Test Beam Facility, which provides an electron beam up to 6 GeV/c. The performance of the readout modules, in particular the spatial point resolution, is determined and compared to earlier tests. New studies are presented with first results on the separation of close-by tracks and the capability of the system to measure the specific energy loss dE/dx. This is complemented by a simulation study on the optimization of the readout granularity to improve particle identification by dE/dx.
△ Less
Submitted 25 November, 2022; v1 submitted 24 May, 2022;
originally announced May 2022.
-
Studies on Electrical Properties of Resistive Plate Chamber (RPC)
Authors:
Subhendu Das,
Jaydeep Datta,
Nayana Majumdar,
Supratik Mukhopadhyay
Abstract:
A numerical model based on Finite Element Method (FEM) has been developed to simulate the electrical properties of RPC utilizing the law of current conservation. It has been used to systematically investigate the effect of the electrical as well as the geometrical parameters of the device components on the potential distribution and field configuration which govern the RPC performance. The numeric…
▽ More
A numerical model based on Finite Element Method (FEM) has been developed to simulate the electrical properties of RPC utilizing the law of current conservation. It has been used to systematically investigate the effect of the electrical as well as the geometrical parameters of the device components on the potential distribution and field configuration which govern the RPC performance. The numerical model has been validated by comparing the dark current and electric field with those produced by another mathematical model based on surface currents. The efficacy of the present model has been demonstrated by comparing its results to the experimental measurements performed with a glass RPC. The measured and estimated values of these observables have been found to be in good agreement.
△ Less
Submitted 20 September, 2022; v1 submitted 27 April, 2022;
originally announced April 2022.
-
Numerical calculation of RPC time resolution
Authors:
Jaydeep Datta,
Nayana Majumdar,
Supratik Mukhopadhyay,
Sandip Sarkar
Abstract:
Resistive Plate Chamber (RPC) is a gaseous detector, known for its good spatial resolution and excellent time resolution. Due to its fast response and excellent time resolution, it is used for both triggering and timing purpose. But the time resolution of RPC is dependent on the detector geometry, applied voltage and the gas mixture used for detector operation. In this work, we have tried to devel…
▽ More
Resistive Plate Chamber (RPC) is a gaseous detector, known for its good spatial resolution and excellent time resolution. Due to its fast response and excellent time resolution, it is used for both triggering and timing purpose. But the time resolution of RPC is dependent on the detector geometry, applied voltage and the gas mixture used for detector operation. In this work, we have tried to develop a numerical model to estimate the time resolution of the detector. The model is developed using COMSOL Multiphysics, a commercially available finite element method solver. Using the primary ionization information from HEED and the electron transport properties from MAGBOLTZ, the model solves the Boltzmann equations to simulate the avalanche in the detector and finds the time to cross a previously determined threshold current, which is used to measure the time resolution of the detector.
△ Less
Submitted 25 April, 2022;
originally announced April 2022.
-
Quality Control of Mass-Produced GEM Detectors for the CMS GE1/1 Muon Upgrade
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
T. Beyrouthy,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi
, et al. (157 additional authors not shown)
Abstract:
The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton co…
▽ More
The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton collisions is expected to exceed $2-3\times10^{34}$~cm$^{-2}$s$^{-1}$ for Run 3 (starting in 2022), and it will be at least $5\times10^{34}$~cm$^{-2}$s$^{-1}$ when the High Luminosity Large Hadron Collider is completed for Run 4. These conditions will affect muon triggering, identification, and measurement, which are critical capabilities of the experiment. To address these challenges, additional muon detectors are being installed in the CMS endcaps, based on Gas Electron Multiplier technology. For this purpose, 161 large triple-Gas Electron Multiplier detectors have been constructed and tested. Installation of these devices began in 2019 with the GE1/1 station and will be followed by two additional stations, GE2/1 and ME0, to be installed in 2023 and 2026, respectively. The assembly and quality control of the GE1/1 detectors were distributed across several production sites around the world. We motivate and discuss the quality control procedures that were developed to standardize the performance of the detectors, and we present the final results of the production. Out of 161 detectors produced, 156 detectors passed all tests, and 144 detectors are now installed in the CMS experiment. The various visual inspections, gas tightness tests, intrinsic noise rate characterizations, and effective gas gain and response uniformity tests allowed the project to achieve this high success rate.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Effect of hole geometry on charge sharing and other parameters in GEM-based detectors
Authors:
Promita Roy,
Purba Bhattacharya,
Prasant Kumar Rout,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar
Abstract:
Gas Electron Multipliers (GEM) are among the more prominent Micro-Pattern Gaseous Detectors (MPGDs) and widely used in high energy particle physics experiments and various related applications. Adoption of different production techniques lead to holes of varying geometries in GEM foils. Since the response of a GEM-based detector is closely related to the hole geometry through the influence of the…
▽ More
Gas Electron Multipliers (GEM) are among the more prominent Micro-Pattern Gaseous Detectors (MPGDs) and widely used in high energy particle physics experiments and various related applications. Adoption of different production techniques lead to holes of varying geometries in GEM foils. Since the response of a GEM-based detector is closely related to the hole geometry through the influence of the latter on charge sharing and transport through GEM foils, attempts have been made to relate hole configurations to different figures of merit of a detector. Numerical simulations have been performed to study the effects of hole geometry on important parameters such as charge sharing, collection efficiency, extraction efficiency, gain, possibility of transition from avalanche to streamer modes for single, double and triple layer GEM detectors. The numerical estimates have been compared to available experimental data. The comparisons, although not always in agreement, are found to be generally encouraging.
△ Less
Submitted 5 March, 2024; v1 submitted 23 December, 2021;
originally announced December 2021.
-
Comparative study on charging-up of single, double and triple Gas Electron Multipliers (GEM)
Authors:
Vishal Kumar,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkara
Abstract:
In this paper, a detailed investigation has been carried out to understand the physics behind GEM charging-up and its effects on gain. Experiments have been performed on both double and triple GEM with the help of 55Fe X-ray source and a comparative study of these configurations along with the single GEM results observed in our previous work has been reported. The increase in gain due to polarizat…
▽ More
In this paper, a detailed investigation has been carried out to understand the physics behind GEM charging-up and its effects on gain. Experiments have been performed on both double and triple GEM with the help of 55Fe X-ray source and a comparative study of these configurations along with the single GEM results observed in our previous work has been reported. The increase in gain due to polarization of GEM foil dielectric and reduction in gain due to charge accumulation on dielectric are studied for various field configurations and different radiation intensities.
△ Less
Submitted 31 May, 2022; v1 submitted 20 December, 2021;
originally announced December 2021.
-
Performance of a Triple-GEM Demonstrator in $pp$ Collisions at the CMS Detector
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi,
O. Bouhali
, et al. (156 additional authors not shown)
Abstract:
After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstr…
▽ More
After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstrator GEM detectors were installed in CMS during 2017 to gain operational experience and perform a preliminary investigation of detector performance. We present the results of triple-GEM detector performance studies performed in situ during normal CMS and LHC operations in 2018. The distribution of cluster size and the efficiency to reconstruct high $p_T$ muons in proton--proton collisions are presented as well as the measurement of the environmental background rate to produce hits in the GEM detector.
△ Less
Submitted 22 September, 2021; v1 submitted 20 July, 2021;
originally announced July 2021.
-
Modeling the triple-GEM detector response to background particles for the CMS Experiment
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
I. Azhgirey,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi
, et al. (164 additional authors not shown)
Abstract:
An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The…
▽ More
An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The simulation framework uses a combination of the FLUKA and Geant4 packages to obtain the hit rate. FLUKA provides the radiation environment around the GE1/1 chambers, which is comprised of the particle flux with momentum direction and energy spectra ranging from $10^{-11}$ to $10^{4}$ MeV for neutrons, $10^{-3}$ to $10^{4}$ MeV for $γ$'s, $10^{-2}$ to $10^{4}$ MeV for $e^{\pm}$, and $10^{-1}$ to $10^{4}$ MeV for charged hadrons. Geant4 provides an estimate of detector response (sensitivity) based on an accurate description of detector geometry, material composition and interaction of particles with the various detector layers. The MC simulated hit rate is estimated as a function of the perpendicular distance from the beam line and agrees with data within the assigned uncertainties of 10-14.5%. This simulation framework can be used to obtain a reliable estimate of background rates expected at the High Luminosity LHC.
△ Less
Submitted 8 July, 2021;
originally announced July 2021.
-
Some considerations about reviewing and open-access in scientific publishing
Authors:
Paolo Politi,
Giuseppe Gaeta,
Satya N. Majumdar,
Antonio Politi,
Stefano Ruffo
Abstract:
Scientific research changed profoundly over the last 30 years, in all its aspects. Scientific publishing has changed as well, mainly because of the strong increased number of submitted papers and because of the appearance of Open Access journals and publishers. We propose some reflections on these issues.
Scientific research changed profoundly over the last 30 years, in all its aspects. Scientific publishing has changed as well, mainly because of the strong increased number of submitted papers and because of the appearance of Open Access journals and publishers. We propose some reflections on these issues.
△ Less
Submitted 26 January, 2022; v1 submitted 5 April, 2021;
originally announced April 2021.
-
Numerical estimation of discharge probability in GEM-based detectors
Authors:
Prasant Kumar Rout,
R. Kanishka,
Jaydeep Datta,
Promita Roy,
Purba Bhattacharya,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar
Abstract:
Discharge probability in GEM-based gaseous detectors has been numerically estimated using an axisymmetric hydrodynamic model. Initial primary charge configurations in the drift region, obtained using Heed and Geant4, are found to have significant effect on the subsequent evolution of detector response. Simulation of energy resolution has been performed to establish the capability of the hydrodynam…
▽ More
Discharge probability in GEM-based gaseous detectors has been numerically estimated using an axisymmetric hydrodynamic model. Initial primary charge configurations in the drift region, obtained using Heed and Geant4, are found to have significant effect on the subsequent evolution of detector response. Simulation of energy resolution has been performed to establish the capability of the hydrodynamic model to capture statistical nature of the experimental situation. Finally, single and triple GEM configurations exposed to alpha sources have been simulated to estimate discharge probability which have been compared with available experimental data. Despite the simplifying and drastic assumptions in the numerical model, the comparisons are encouraging.
△ Less
Submitted 13 August, 2021; v1 submitted 23 March, 2021;
originally announced March 2021.
-
Numerical Qualification of Eco-Friendly Gas Mixtures for Avalanche-Mode Operation of Resistive Plate Chambers in INO-ICAL
Authors:
Jaydeep Datta,
Sridhar Tripathy,
Nayana Majumdar,
Supratik Mukhopadhyay
Abstract:
Numerical qualification of an eco-friendly alternative gas mixture for avalanche mode operation of Resistive Plate Chambers is the soul of this work. To identify the gas mixture, a numerical model developed elsewhere by the authors has been first established by comparing the simulated figure of merits (efficiency and streamer probability) with the experimental data for the gas mixture used in INO-…
▽ More
Numerical qualification of an eco-friendly alternative gas mixture for avalanche mode operation of Resistive Plate Chambers is the soul of this work. To identify the gas mixture, a numerical model developed elsewhere by the authors has been first established by comparing the simulated figure of merits (efficiency and streamer probability) with the experimental data for the gas mixture used in INO-ICAL. Then it has been used to simulate the same properties of a gas mixture based on argon, carbon di-oxide and nitrogen, identified as potential replacement by studying its different properties. Efficacy of this eco-friendly gas mixture has been studied by comparing the simulated result with the standard gas mixture used in INO-ICAL as well as with experimental data of other eco-friendly hydrofluorocarbon (HFO1234ze) based potential replacements. To increase the efficacy of the proposed gas mixture, studies of the traditional way (addition of a little amount of SF$_6$) and an alternative approach (exploring the option of high-end electronics) were carried out.
△ Less
Submitted 3 May, 2021; v1 submitted 2 March, 2021;
originally announced March 2021.
-
Numerical Evaluation of a muon tomography system for imaging defects in concrete structures
Authors:
Sridhar Tripathy,
Jaydeep Datta,
Nayana Majumdar,
Supratik Mukhopadhyay
Abstract:
Among numerous applications of muon tomography, deployment in civil structures has caught attraction of many recently. In this work, the appropriateness of muon scattering tomography to detect defects in concrete structures has been studied numerically. A few basic concrete structures that are frequently used in civil construction, have been considered as test cases. A simulation has been performe…
▽ More
Among numerous applications of muon tomography, deployment in civil structures has caught attraction of many recently. In this work, the appropriateness of muon scattering tomography to detect defects in concrete structures has been studied numerically. A few basic concrete structures that are frequently used in civil construction, have been considered as test cases. A simulation has been performed on Geant4 platform where an imaging setup built with several gaseous ionization detectors, having a specific spatial resolution for tracking the muons, have been modeled. The images of the test cases with and without the defect have been simulated for a month-long exposure of cosmic muons on the basis of their scattering from the composite concrete structures. The images have been compared using t-test to evaluate the performance of the imaging setup in identifying the defects. Further processing of the images has been done with a pattern recognition method proposed in our earlier work to improve defect identification. The efficacy of the said method has been evaluated in terms of the PRM-score devised in this work. The limitation and advantages of the present application of the muon scattering tomography encompassing the imaging and image processing technique in non-destructive evaluation of concrete structures have been discussed.
△ Less
Submitted 22 March, 2021; v1 submitted 17 February, 2021;
originally announced February 2021.
-
Fast simulation of avalanche and streamer in GEM detector using hydrodynamic approach
Authors:
Prasant Kumar Rout,
Jaydeep Datta,
Promita Roy,
Purba Bhattacharya,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar
Abstract:
A fast, hydrodynamic numerical model has been developed on the COMSOL Multi-physics platform to simulate the evolution and dynamics of charged particles in gaseous ionization detectors based on the Gaseous Electron Multipliers (GEM). Effects of using two-dimensional (2D), 2D axisymmetric and three-dimensional(3D) models of the detectors have been analyzed to choose the optimum configuration. The c…
▽ More
A fast, hydrodynamic numerical model has been developed on the COMSOL Multi-physics platform to simulate the evolution and dynamics of charged particles in gaseous ionization detectors based on the Gaseous Electron Multipliers (GEM). Effects of using two-dimensional (2D), 2D axisymmetric and three-dimensional(3D) models of the detectors have been analyzed to choose the optimum configuration. The chosen model has been used to follow the entire operating regime of single, double and triple GEM detectors, including avalanche and streamer mode operations. The accumulation of space charge, its contribution towards the distortion of the applied electric field and production of streamers have been investigated in fair detail using the optimized model.
△ Less
Submitted 15 December, 2020; v1 submitted 5 November, 2020;
originally announced November 2020.
-
Interstrip Capacitances of the Readout Board used in Large Triple-GEM Detectors for the CMS Muon Upgrade
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi,
O. Bouhali
, et al. (156 additional authors not shown)
Abstract:
We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequent…
▽ More
We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequently maximize the signal-to-noise ratio for the detector. We find agreement at the 1.5--4.8% level between the two methods of calculations and on the average at the 17% level between calculations and measurements. A configuration with halved strip lengths and doubled strip widths results in a measured 27--29% reduction over the original configuration while leaving the total number of strips unchanged. We have now adopted this design modification for all eight module types of the GE2/1 detector and will produce the final detector with this new strip design.
△ Less
Submitted 20 September, 2020;
originally announced September 2020.
-
Study of Streamer Development in Resistive Plate Chamber
Authors:
Jaydeep Datta,
Sridhar Tripathy,
Nayana Majumdar,
Supratik Mukhopadhyay
Abstract:
This work has been carried out to simulate a Resistive Plate Chamber and corroborate it with experimental measurements in order to develop a numerical tool for studying the performance of the device for any gas mixture. This will allow us to explore the feasibility of operating these chambers in their avalanche mode within the Iron Calorimeter setup at India-based Neutrino Observatory with any eco…
▽ More
This work has been carried out to simulate a Resistive Plate Chamber and corroborate it with experimental measurements in order to develop a numerical tool for studying the performance of the device for any gas mixture. This will allow us to explore the feasibility of operating these chambers in their avalanche mode within the Iron Calorimeter setup at India-based Neutrino Observatory with any eco-friendly substitute. The simulation has considered a hydrodynamic model of charge transport to emulate the electronic and ionic growths in the device as a function of the applied voltage which determines its working mode as either of the avalanche or streamer. In order to validate, the simulation result has been compared with compatible experimental data available in the literature.
△ Less
Submitted 20 November, 2020; v1 submitted 28 May, 2020;
originally announced May 2020.
-
Precise Tracking of Cosmic Muons using Time over Threshold property of NINO ASICs
Authors:
Sridhar Tripathy,
Subhendu Das,
Jaydeep Datta,
Nayana Majumdar,
Supratik Mukhopadhyay
Abstract:
This work reports a cost-effective, simple front-end readout and DAQ of a RPC-based muon scattering tomography system under construction. The Time-over-threshold property of NINO ASICs has been exploited to achieve precise tracking by extraction of position information. The use of a low-cost FPGA for event selection and TOT measurement has been demonstrated for a prototype RPC which has been trigg…
▽ More
This work reports a cost-effective, simple front-end readout and DAQ of a RPC-based muon scattering tomography system under construction. The Time-over-threshold property of NINO ASICs has been exploited to achieve precise tracking by extraction of position information. The use of a low-cost FPGA for event selection and TOT measurement has been demonstrated for a prototype RPC which has been triggered by a cosmic ray hodoscope of three plastic scintillators. The relation between input pulse width and TOT has been established by analyzing the waveforms of the RPC signals. The TOT profile at different working voltages has been obtained by the FPGA and it has been fitted with the Gaussian distribution. Its standard deviation represents an estimate of the tracking precision.
△ Less
Submitted 28 May, 2020; v1 submitted 30 April, 2020;
originally announced April 2020.
-
Charge sharing in single and double GEMs
Authors:
Promita Roy,
Purba Bhattacharya,
Supratik Mukhopadhyay,
Nayana Majumdar
Abstract:
The Gas Electron Multiplier (GEM) has become a widely used technology for high-rate particle physics experiments like COMPASS, LHCb and are being used as the readout system for the upcoming upgrade version of other experiments such as ALICE TPC. Radiation hardness, ageing resistance and stability against discharges are main criteria for long-term operation of such detectors in high-rate experiment…
▽ More
The Gas Electron Multiplier (GEM) has become a widely used technology for high-rate particle physics experiments like COMPASS, LHCb and are being used as the readout system for the upcoming upgrade version of other experiments such as ALICE TPC. Radiation hardness, ageing resistance and stability against discharges are main criteria for long-term operation of such detectors in high-rate experiments. In particular, discharge is a serious issue as it may cause irreversible damages to the detector as well as the readout electronics. The charge density inside the amplification region is the limiting factor for detector stability against discharges. By using multiple devices and thus, sharing the electron multiplication in different stages, maximum sustainable gain can be increased by several orders of magnitude. A common explanation for this is connected to the transverse electron diffusion, widening of the electron cloud and reducing the charge density in the last multiplier. However, this has not been verified yet. In our work, we are using Garfield simulation framework as a tool to extract the information related to the transverse size of the propagating electron cloud and thus, to estimate the charge density in the GEM holes for multiple stages. For a given gas mixture, we will present the initial results of charge sharing using single and double GEM detectors under different electric field configurations and its effect on other measurable detector parameters such as single point position resolution.
△ Less
Submitted 27 May, 2020; v1 submitted 28 April, 2020;
originally announced April 2020.
-
Numerical study of track distortion in the Large Prototype TPC with end-plate based on bulk Micromegas
Authors:
Deb Sankar Bhattacharya,
Purba Bhattacharya,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar,
Sudeb Bhattacharya,
Paul Colas,
David Attié,
Serguei Ganjour,
Aparajita Bhattacharya
Abstract:
The present $\mathrm{R}\&\mathrm{D}$ activities for the International Large Detector Time Projection Chamber (ILD-TPC) concern the adoption of the micro pattern devices for the gaseous amplification stage. Seven Micromegas modules which are commissioned on the end-plate of a Large Prototype TPC (LPTPC) at DESY, were tested with a 5 GeV electron beam, under a 1 T magnetic field. During experiments,…
▽ More
The present $\mathrm{R}\&\mathrm{D}$ activities for the International Large Detector Time Projection Chamber (ILD-TPC) concern the adoption of the micro pattern devices for the gaseous amplification stage. Seven Micromegas modules which are commissioned on the end-plate of a Large Prototype TPC (LPTPC) at DESY, were tested with a 5 GeV electron beam, under a 1 T magnetic field. During experiments, reduced signal sensitivity as well as distortion in the reconstructed track was observed at the boundaries of these modules. Electrostatic field inhomogeneity near the module boundaries was considered to be the possible major reason behind these observations. In the present work, this hypothesis has been explored using the Garfield simulation framework. It has been possible to contain the computational complexity of the problem with suitable simplifications. Qualitative and quantitative agreements with experimental results have been achieved. Possibility of mitigating the problems has been proposed using the same simulation framework.
△ Less
Submitted 28 May, 2020; v1 submitted 20 April, 2020;
originally announced April 2020.
-
Material Discrimination in Cosmic Muon Imaging using Pattern Recognition Method
Authors:
Sridhar Tripathy,
Jaydeep Datta,
Nayana Majumdar,
Supratik Mukhopadhyay
Abstract:
This work reports numerical simulations and statistical tests carried out to study the performance of a prototype imaging setup to be developed for material discrimination using Muon Scattering Tomography (MST). The reconstructed images have been processed with a Pattern Recognition Method (PRM) to discriminate the low-Z and high-Z materials. The same method has been applied to examine the perform…
▽ More
This work reports numerical simulations and statistical tests carried out to study the performance of a prototype imaging setup to be developed for material discrimination using Muon Scattering Tomography (MST). The reconstructed images have been processed with a Pattern Recognition Method (PRM) to discriminate the low-Z and high-Z materials. The same method has been applied to examine the performance of the setup in recognizing the shape of the test objects. Design parameters of the setup, such as area of the muon detectors, their physical placement, along with their spatial resolution, etc. have been discussed. To evaluate the efficacy of the newly proposed PRM, the results have been compared to another technique based on cluster finding.
△ Less
Submitted 2 May, 2020; v1 submitted 11 March, 2020;
originally announced March 2020.
-
Studies on charging-up of single Gas Electron Multiplier
Authors:
Vishal Kumar,
Sridhar Tripathy,
Purba Bhattacharya,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar
Abstract:
Mechanisms of charging-up and charging-down of Gas Electron Multiplier (GEM) have been studied. Experimental investigations have been carried out on both dielectric polarization and radiation charging of GEMs. Environmental parameters, such as pressure and temperature have been monitored to normalize their effects on the charging-up and charging-down measurements. Variation in gain due to the comb…
▽ More
Mechanisms of charging-up and charging-down of Gas Electron Multiplier (GEM) have been studied. Experimental investigations have been carried out on both dielectric polarization and radiation charging of GEMs. Environmental parameters, such as pressure and temperature have been monitored to normalize their effects on the charging-up and charging-down measurements. Variation in gain due to the combined, as well as individual, effects of the mentioned parameters has been illustrated.
△ Less
Submitted 9 December, 2020; v1 submitted 22 February, 2020;
originally announced February 2020.
-
Numerical studies on effect of operating conditions and geometrical components on the timing response and efficiency of RPC
Authors:
Abhik Jash,
Nayana Majumdar,
Supratik Mukhopadhyay,
Subhasis Chattopadhyay
Abstract:
A detailed numerical simulation has been performed to investigate the timing properties of a standard RPC geometry in order to optimize its application in INO-ICAL experiment designed for studying atmospheric neutrinos. The timing information provided by the RPC is an important observable in the experiment to determine the direction of the neutrinos. Effects of various operating conditions and des…
▽ More
A detailed numerical simulation has been performed to investigate the timing properties of a standard RPC geometry in order to optimize its application in INO-ICAL experiment designed for studying atmospheric neutrinos. The timing information provided by the RPC is an important observable in the experiment to determine the direction of the neutrinos. Effects of various operating conditions and design components on the RPC timing response, mainly the average signal arrival time and the time resolution have been studied in this context. The dependence of the detector efficiency on the same parameters has also been presented.
△ Less
Submitted 14 June, 2019; v1 submitted 17 December, 2018;
originally announced December 2018.
-
An exactly solvable record model for rainfall
Authors:
Satya N. Majumdar,
Philipp von Bomhard,
Joachim Krug
Abstract:
Daily precipitation time series are composed of null entries corresponding to dry days and nonzero entries that describe the rainfall amounts on wet days. Assuming that wet days follow a Bernoulli process with success probability $p$, we show that the presence of dry days induces negative correlations between record-breaking precipitation events. The resulting non-monotonic behavior of the Fano fa…
▽ More
Daily precipitation time series are composed of null entries corresponding to dry days and nonzero entries that describe the rainfall amounts on wet days. Assuming that wet days follow a Bernoulli process with success probability $p$, we show that the presence of dry days induces negative correlations between record-breaking precipitation events. The resulting non-monotonic behavior of the Fano factor of the record counting process is recovered in empirical data. We derive the full probability distribution $P(R,n)$ of the number of records $R_n$ up to time $n$, and show that for large $n$, its large deviation form coincides with that of a Poisson distribution with parameter $\ln(p\,n)$. We also study in detail the joint limit $p \to 0$, $n \to \infty$, which yields a random record model in continuous time $t = pn$.
△ Less
Submitted 27 August, 2018;
originally announced August 2018.
-
Material Identification with Cosmic Ray Muons using RPCs
Authors:
Sridhar Tripathy,
Jaydeep Datta,
Abhik Jash,
Subhadip Bouri,
Nayana Majumdar,
Supratik Mukhopadhyay,
Sandip Sarkar
Abstract:
We plan to build an imaging setup for material identification utilizing the Coulomb scattering of cosmic ray muons due to their interaction with the materials and tracking their trajectories with RPCs. To begin with, we consider a setup of six RPCs stacked in a parallel manner to read the position and timing information of the muons before and after their interaction with a phantom of a given mate…
▽ More
We plan to build an imaging setup for material identification utilizing the Coulomb scattering of cosmic ray muons due to their interaction with the materials and tracking their trajectories with RPCs. To begin with, we consider a setup of six RPCs stacked in a parallel manner to read the position and timing information of the muons before and after their interaction with a phantom of a given material using a set of three RPCs for each phase. Here we present a simulation work carried out to study the image formation of the phantom of several materials using the present setup. A detailed modeling of the imaging system consisting of six RPCs was done using GEANT4. Cosmic Ray Library (CRY) was used for generation of particles with the appropriate distribution of energies and momenta. Three reconstruction algorithms were followed for material identification and image reconstruction, viz. Point of Closest Approach (POCA), Iterative POCA and the Binned Clustering Algorithm. A weighted metric discriminator was calculated for target object identification. Using the algorithms, the imaging of the area of interest lying between the two layers of RPCs was done. The time required to discriminate target objects and do the image reconstruction has been studied.
△ Less
Submitted 10 June, 2018;
originally announced June 2018.
-
Large Deviations of Convex Hulls of Self-Avoiding Random Walks
Authors:
Hendrik Schawe,
Alexander K. Hartmann,
Satya N. Majumdar
Abstract:
A global picture of a random particle movement is given by the convex hull of the visited points. We obtained numerically the probability distributions of the volume and surface of the convex hulls of a selection of three types of self-avoiding random walks, namely the classical Self-Avoiding Walk, the Smart-Kinetic Self-Avoiding Walk, and the Loop-Erased Random Walk. To obtain a comprehensive des…
▽ More
A global picture of a random particle movement is given by the convex hull of the visited points. We obtained numerically the probability distributions of the volume and surface of the convex hulls of a selection of three types of self-avoiding random walks, namely the classical Self-Avoiding Walk, the Smart-Kinetic Self-Avoiding Walk, and the Loop-Erased Random Walk. To obtain a comprehensive description of the measured random quantities, we applied sophisticated large-deviation techniques, which allowed us to obtain the distributions over a large range of the support down to probabilities far smaller than $P = 10^{-100}$ . We give an approximate closed form of the so-called large-deviation rate function $Φ$ which generalizes above the upper critical dimension to the previously studied case of the standard random walk. Further we show correlations between the two observables also in the limits of atypical large or small values.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
-
Measurement and simulation of two-phase CO$_2$ cooling for the AFTER electronics of the Micromegas modules for a Large Prototype of a Time Projection Chamber
Authors:
Deb Sankar Bhattacharya,
David Attie,
Paul Colas,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sudeb Bhattacharya,
Sandip Sarkar,
Aparajita Bhattacharya,
Serguei Ganjour
Abstract:
The readout electronics of a Micromegas (MM) module consume nearly 26 W of electric power, which causes the temperature of electronic board to increase upto $70\,^{\circ}{\rm C}$. Increase in temperature results in damage of electronics. Development of temperature gradient in the Time Projection Chamber (TPC) may affect precise measurement as well. Two-phase CO$_2$ cooling has been applied to remo…
▽ More
The readout electronics of a Micromegas (MM) module consume nearly 26 W of electric power, which causes the temperature of electronic board to increase upto $70\,^{\circ}{\rm C}$. Increase in temperature results in damage of electronics. Development of temperature gradient in the Time Projection Chamber (TPC) may affect precise measurement as well. Two-phase CO$_2$ cooling has been applied to remove heat from the MM modules during two test beam experiments at DESY, Hamburg. Following the experimental procedure, a comprehensive study of the cooling technique has been accomplished for a single MM module by means of numerical simulation. This paper is focused to discuss the application of two-phase CO$_2$ cooling to keep the temperature below $30\,^{\circ}{\rm C}$ and stabilized within $0.2\,^{\circ}{\rm C}$.
△ Less
Submitted 31 December, 2017;
originally announced January 2018.
-
Large deviations
Authors:
Satya N. Majumdar,
Gregory Schehr
Abstract:
This is a brief pedagogical introduction to the theory of large deviations. It appeared in the ICTS Newsletter 2017 (Volume 3, Issue 2), goo.gl/pZWA6X.
This is a brief pedagogical introduction to the theory of large deviations. It appeared in the ICTS Newsletter 2017 (Volume 3, Issue 2), goo.gl/pZWA6X.
△ Less
Submitted 20 November, 2017;
originally announced November 2017.
-
Experimental and numerical simulation of a TPC like set up for the measurement of ion backflow
Authors:
Deb Sankar Bhattacharya,
Purba Bhattacharya,
Prasant Kumar Rout,
Supratik Mukhopadhyay,
Sudeb Bhattacharya,
Nayana Majumdar,
Sandip Sarkar,
Paul Colas,
David Attie,
Serguei Ganjour,
Aparajita Bhattacharya
Abstract:
Ion backflow is one of the effects limiting the operation of a gaseous detector at high flux, by giving rise to space charge which perturbs the electric field. The natural ability of bulk Micromegas to suppress ion feedback is very effective and can help the TPC drift volume to remain relatively free of space charge build-up. An efficient and precise measurement of the backflow fraction is necessa…
▽ More
Ion backflow is one of the effects limiting the operation of a gaseous detector at high flux, by giving rise to space charge which perturbs the electric field. The natural ability of bulk Micromegas to suppress ion feedback is very effective and can help the TPC drift volume to remain relatively free of space charge build-up. An efficient and precise measurement of the backflow fraction is necessary to cope up with the track distortion due to the space charge effect. In a subtle but significant modification of the usual approach, we have made use of two drift meshes in order to measure the ion backflow fraction for bulk Micromegas detector. This helps to truly represent the backflow fraction for a TPC. Moreover, attempt is taken to optimize the field configuration between the drift meshes. In conjunction with the experimental measurement, Garfield simulation framework has been used to simulate the related physics processes numerically.
△ Less
Submitted 2 October, 2017;
originally announced October 2017.
-
3D Simulation of Electron and Ion Transmission of GEM-based Detectors
Authors:
Purba Bhattacharya,
Bedangadas Mohanty,
Supratik Mukhopadhyay,
Nayana Majumdar,
Hugo Natal da Luz
Abstract:
Time Projection Chamber (TPC) has been chosen as the main tracking system in several high-flux and high repetition rate experiments. These include on-going experiments such as ALICE and future experiments such as PANDA at FAIR and ILC. Different $\mathrm{R}\&\mathrm{D}$ activities were carried out on the adoption of Gas Electron Multiplier (GEM) as the gas amplification stage of the ALICE-TPC upgr…
▽ More
Time Projection Chamber (TPC) has been chosen as the main tracking system in several high-flux and high repetition rate experiments. These include on-going experiments such as ALICE and future experiments such as PANDA at FAIR and ILC. Different $\mathrm{R}\&\mathrm{D}$ activities were carried out on the adoption of Gas Electron Multiplier (GEM) as the gas amplification stage of the ALICE-TPC upgrade version. The requirement of low ion feedback has been established through these activities. Low ion feedback minimizes distortions due to space charge and maintains the necessary values of detector gain and energy resolution. In the present work, Garfield simulation framework has been used to study the related physical processes occurring within single, triple and quadruple GEM detectors. Ion backflow and electron transmission of quadruple GEMs, made up of foils with different hole pitch under different electromagnetic field configurations (the projected solutions for the ALICE TPC) have been studied. Finally a new triple GEM detector configuration with low ion backflow fraction and good electron transmission properties has been proposed as a simpler GEM-based alternative suitable for TPCs for future collider experiments.
△ Less
Submitted 2 October, 2017;
originally announced October 2017.
-
Convex Hulls of Random Walks in Higher Dimensions: A Large Deviation Study
Authors:
Hendrik Schawe,
Alexander K. Hartmann,
Satya N. Majumdar
Abstract:
The distribution of the hypervolume $V$ and surface $\partial V$ of convex hulls of (multiple) random walks in higher dimensions are determined numerically, especially containing probabilities far smaller than $P = 10^{-1000}$ to estimate large deviation properties. For arbitrary dimensions and large walk lengths $T$, we suggest a scaling behavior of the distribution with the length of the walk…
▽ More
The distribution of the hypervolume $V$ and surface $\partial V$ of convex hulls of (multiple) random walks in higher dimensions are determined numerically, especially containing probabilities far smaller than $P = 10^{-1000}$ to estimate large deviation properties. For arbitrary dimensions and large walk lengths $T$, we suggest a scaling behavior of the distribution with the length of the walk $T$ similar to the two-dimensional case, and behavior of the distributions in the tails. We underpin both with numerical data in $d=3$ and $d=4$ dimensions. Further, we confirm the analytically known means of those distributions and calculate their variances for large $T$.
△ Less
Submitted 8 September, 2017;
originally announced September 2017.
-
Record statistics of a strongly correlated time series: random walks and Lévy flights
Authors:
Claude Godreche,
Satya N. Majumdar,
Gregory Schehr
Abstract:
We review recent advances on the record statistics of strongly correlated time series, whose entries denote the positions of a random walk or a Lévy flight on a line. After a brief survey of the theory of records for independent and identically distributed random variables, we focus on random walks. During the last few years, it was indeed realized that random walks are a very useful "laboratory"…
▽ More
We review recent advances on the record statistics of strongly correlated time series, whose entries denote the positions of a random walk or a Lévy flight on a line. After a brief survey of the theory of records for independent and identically distributed random variables, we focus on random walks. During the last few years, it was indeed realized that random walks are a very useful "laboratory" to test the effects of correlations on the record statistics. We start with the simple one-dimensional random walk with symmetric jumps (both continuous and discrete) and discuss in detail the statistics of the number of records, as well as of the ages of the records, i.e., the lapses of time between two successive record breaking events. Then we review the results that were obtained for a wide variety of random walk models, including random walks with a linear drift, continuous time random walks, constrained random walks (like the random walk bridge) and the case of multiple independent random walkers. Finally, we discuss further observables related to records, like the record increments, as well as some questions raised by physical applications of record statistics, like the effects of measurement error and noise.
△ Less
Submitted 2 February, 2017;
originally announced February 2017.
-
Convex Hulls of Multiple Random Walks: A Large-Deviation Study
Authors:
Timo Dewenter,
Gunnar Claussen,
Alexander K. Hartmann,
Satya N. Majumdar
Abstract:
We study the polygons governing the convex hull of a point set created by the steps of $n$ independent two-dimensional random walkers. Each such walk consists of $T$ discrete time steps, where $x$ and $y$ increments are i.i.d. Gaussian. We analyze area $A$ and perimeter $L$ of the convex hulls. We obtain probability densities for these two quantities over a large range of the support by using a la…
▽ More
We study the polygons governing the convex hull of a point set created by the steps of $n$ independent two-dimensional random walkers. Each such walk consists of $T$ discrete time steps, where $x$ and $y$ increments are i.i.d. Gaussian. We analyze area $A$ and perimeter $L$ of the convex hulls. We obtain probability densities for these two quantities over a large range of the support by using a large-deviation approach allowing us to study densities below $10^{-900}$. We find that the densities exhibit a universal scaling behavior as a function of $A/T$ and $L/\sqrt{T}$, respectively. As in the case of one walker ($n=1$), the densities follow Gaussian distributions for $L$ and $\sqrt{A}$, respectively. We also obtained the rate functions for the area and perimeter, rescaled with the scaling behavior of their maximum possible values, and found limiting functions for $T \rightarrow \infty$, revealing that the densities follow the large-deviation principle. These rate functions can be described by a power law for $n \rightarrow \infty$ as found in the $n=1$ case. We also investigated the behavior of the averages as a function of the number of walks $n$ and found good agreement with the predicted behavior.
△ Less
Submitted 23 May, 2016;
originally announced May 2016.
-
Performance Studies of Bulk Micromegas of Different Design Parameters
Authors:
Purba Bhattacharya,
Sudeb Bhattacharya,
Nayana Majumdar,
Supratik Mukhopadhyay,
Sandip Sarkar,
Paul Colas,
David Attie
Abstract:
The present work involves the comparison of various bulk Micromegas detectors having different design parameters. Six detectors with amplification gaps of $64,~128,~192,~220 ~μ\mathrm{m}$ and mesh hole pitch of $63,~78 ~μ\mathrm{m}$ were tested at room temperature and normal gas pressure. Two setups were built to evaluate the effect of the variation of the amplification gap and mesh hole pitch on…
▽ More
The present work involves the comparison of various bulk Micromegas detectors having different design parameters. Six detectors with amplification gaps of $64,~128,~192,~220 ~μ\mathrm{m}$ and mesh hole pitch of $63,~78 ~μ\mathrm{m}$ were tested at room temperature and normal gas pressure. Two setups were built to evaluate the effect of the variation of the amplification gap and mesh hole pitch on different detector characteristics. The gain, energy resolution and electron transmission of these Micromegas detectors were measured in Argon-Isobutane (90:10) gas mixture while the measurements of the ion backflow were carried out in P10 gas. These measured characteristics have been compared in detail to the numerical simulations using the Garfield framework that combines packages such as neBEM, Magboltz and Heed.
△ Less
Submitted 10 May, 2016;
originally announced May 2016.
-
Investigation of Ion Backflow in Bulk Micromegas Detectors
Authors:
Purba Bhattacharya,
Deb Sankar Bhattacharya,
Supratik Mukhopadhyay,
Sudeb Bhattacharya,
Nayana Majumdar,
Sandip Sarkar,
Paul Colas,
David Attie
Abstract:
The operation of gas detectors is often limited by secondary effects, originating from avalanche-induced photons and ions. Ion backflow is one of the effects limiting the operation of a gas detector at high flux, by giving rise to space charge which disturbs the electric field locally. For the Micromegas detector, a large fraction of the secondary positive ions created in the avalanche can be stop…
▽ More
The operation of gas detectors is often limited by secondary effects, originating from avalanche-induced photons and ions. Ion backflow is one of the effects limiting the operation of a gas detector at high flux, by giving rise to space charge which disturbs the electric field locally. For the Micromegas detector, a large fraction of the secondary positive ions created in the avalanche can be stopped at the micro-mesh. The present work involves measurements of the ion backflow fraction (using an experimental setup comprising of two drift planes) in bulk Micromegas detectors as a function of detector design parameters. These measured characteristics have also been compared in detail to numerical simulations using the Garfield framework that combines packages such as neBEM, Magboltz and Heed. Further, the effect of using a second micro-mesh on ion backflow and other parameters has been studied numerically.
△ Less
Submitted 10 May, 2016;
originally announced May 2016.
-
The effect of spacers on the performance of Micromegas detectors: a numerical investigation
Authors:
Purba Bhattacharya,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sudeb Bhattacharya
Abstract:
Micromegas detector is considered to be a promising candidate for a large variety of high-rate experiments. Micromegas of various geometries have already been established as appropriate for these experiments for their performances in terms of gas gain uniformity, energy and space point resolution, and their capability to efficiently pave large read-out surfaces with minimum dead zone. The present…
▽ More
Micromegas detector is considered to be a promising candidate for a large variety of high-rate experiments. Micromegas of various geometries have already been established as appropriate for these experiments for their performances in terms of gas gain uniformity, energy and space point resolution, and their capability to efficiently pave large read-out surfaces with minimum dead zone. The present work investigates the effect of spacers on different detector characteristics of Micromegas detectors having various amplification gaps and mesh hole pitches. Numerical simulation has been used as a tool of exploration to evaluate the effect of such dielectric material on detector performance. Some of the important and fundamental characteristics such as electron transparency, gain and signal of the Micromegas detector have been estimated.
△ Less
Submitted 10 May, 2016;
originally announced May 2016.
-
Numerical Studies on Time Resolution of Micro-Pattern Gaseous Detectors
Authors:
Purba Bhattacharya,
Nayana Majumdar,
Supratik Mukhopadhyay,
Sudeb Bhattacharya
Abstract:
The Micro-Pattern Gaseous Detectors offer excellent spatial and temporal resolution in harsh radiation environments of high-luminosity colliders. In this work, an attempt has been made to establish an algorithm for estimating the time resolution of different MPGDs. It has been estimated numerically on the basis of two aspects, statistics and distribution of primary electrons and their diffusion in…
▽ More
The Micro-Pattern Gaseous Detectors offer excellent spatial and temporal resolution in harsh radiation environments of high-luminosity colliders. In this work, an attempt has been made to establish an algorithm for estimating the time resolution of different MPGDs. It has been estimated numerically on the basis of two aspects, statistics and distribution of primary electrons and their diffusion in gas medium, while ignoring their multiplication. The effect of detector design parameters, field configuration and the composition of gas mixture on the resolution have also been investigated. Finally, a modification in the numerical approach considering the threshold limit of detecting the signal has been done and tested for the RPC detector for its future implementation in case of MPGDs.
△ Less
Submitted 10 May, 2016;
originally announced May 2016.
-
Effect of plate roughness on the field near RPC plates
Authors:
Abhik Jash,
Nayana Majumdar,
Supratik Mukhopadhyay,
Subhasis Chattopadhyay
Abstract:
The inner surfaces of the electrodes encompassing the gas volume of a Resistive Plate Chamber (RPC) have been found to exhibit asperities with, grossly, three kinds of features. The desired uniform electric field within the gas volume of RPC is expected to be affected due to the presence of these asperities, which will eventually affect the final response from the detector. In this work, an attemp…
▽ More
The inner surfaces of the electrodes encompassing the gas volume of a Resistive Plate Chamber (RPC) have been found to exhibit asperities with, grossly, three kinds of features. The desired uniform electric field within the gas volume of RPC is expected to be affected due to the presence of these asperities, which will eventually affect the final response from the detector. In this work, an attempt has been made to model the highly complex roughness of the electrode surfaces and compute its effect on the electrostatic field within RPC gas chamber. The calculations have been performed numerically using Finite Element Method (FEM) and Boundary Element Method (BEM) and the two methods have been compared in this context.
△ Less
Submitted 21 June, 2016; v1 submitted 7 May, 2016;
originally announced May 2016.
-
Numerical study on the effect of design parameters and spacers on RPC signal and timing properties
Authors:
Abhik Jash,
Nayana Majumdar,
Supratik Mukhopadhyay,
Satyajit Saha,
Subhasis Chattopadhyay
Abstract:
Numerical calculations have been performed to understand the reason for the observed non-uniform response of a Resistive Plate Chamber (RPC) in a few critical regions such as near edge spacers and corners of the device. In this context, the signal from a RPC due to the passage of muons through different regions has been computed. Also, a simulation of RPC timing properties is presented along with…
▽ More
Numerical calculations have been performed to understand the reason for the observed non-uniform response of a Resistive Plate Chamber (RPC) in a few critical regions such as near edge spacers and corners of the device. In this context, the signal from a RPC due to the passage of muons through different regions has been computed. Also, a simulation of RPC timing properties is presented along with the effect of the applied field, gas mixture and geometrical components.
△ Less
Submitted 14 September, 2016; v1 submitted 7 May, 2016;
originally announced May 2016.
-
Effect of water vapor on the performance of glass RPCs in avalanche mode operation
Authors:
K. Raveendrababu,
P. K. Behera,
B. Satyanarayana,
S. Mukhopadhayay,
N. Majumdar
Abstract:
We studied the effect of water vapor on the performance of glass Resistive Plate Chambers (RPCs) in the avalanche mode operation. Controlled and calibrated amount of water vapor was added to the RPC gas mixture that has C$_2$H$_2$F$_4$ as the major component. The deterioration in the performance of RPC was observed while operating with wet gas and recovered after switching to standard gas.
We studied the effect of water vapor on the performance of glass Resistive Plate Chambers (RPCs) in the avalanche mode operation. Controlled and calibrated amount of water vapor was added to the RPC gas mixture that has C$_2$H$_2$F$_4$ as the major component. The deterioration in the performance of RPC was observed while operating with wet gas and recovered after switching to standard gas.
△ Less
Submitted 6 May, 2016;
originally announced May 2016.
-
A Time Projection Chamber with GEM-Based Readout
Authors:
The LCTPC Collaboration,
David Attié,
Ties Behnke,
Alain Bellerive,
Oleg Bezshyyko,
Deb Sankar Bhattacharya,
Purba Bhattacharya,
Sudeb Bhattacharya,
Stefano Caiazza,
Paul Colas,
Gilles De Lentdecker,
Klaus Dehmelt,
Klaus Desch,
Ralf Diener,
Madhu Dixit,
Ivor Fleck,
Keisuke Fujii,
Takahiro Fusayasu,
Serguei Ganjour,
Yuanning Gao,
Philippe Gros,
Peter Hayman,
Vincent Hedberg,
Katsumasa Ikematsu,
Leif Jönsson
, et al. (45 additional authors not shown)
Abstract:
For the International Large Detector concept at the planned International Linear Collider, the use of time projection chambers (TPC) with micro-pattern gas detector readout as the main tracking detector is investigated. In this paper, results from a prototype TPC, placed in a 1 T solenoidal field and read out with three independent GEM-based readout modules, are reported. The TPC was exposed to a…
▽ More
For the International Large Detector concept at the planned International Linear Collider, the use of time projection chambers (TPC) with micro-pattern gas detector readout as the main tracking detector is investigated. In this paper, results from a prototype TPC, placed in a 1 T solenoidal field and read out with three independent GEM-based readout modules, are reported. The TPC was exposed to a 6 GeV electron beam at the DESY II synchrotron. The efficiency for reconstructing hits, the measurement of the drift velocity, the space point resolution and the control of field inhomogeneities are presented.
△ Less
Submitted 4 April, 2016;
originally announced April 2016.
-
Exact statistics of record increments of random walks and Lévy flights
Authors:
Claude Godreche,
Satya N. Majumdar,
Gregory Schehr
Abstract:
We study the statistics of increments in record values in a time series $\{x_0=0,x_1, x_2, \ldots, x_n\}$ generated by the positions of a random walk (discrete time, continuous space) of duration $n$ steps. For arbitrary jump length distribution, including Lévy flights, we show that the distribution of the record increment becomes stationary, i.e., independent of $n$ for large $n$, and compute it…
▽ More
We study the statistics of increments in record values in a time series $\{x_0=0,x_1, x_2, \ldots, x_n\}$ generated by the positions of a random walk (discrete time, continuous space) of duration $n$ steps. For arbitrary jump length distribution, including Lévy flights, we show that the distribution of the record increment becomes stationary, i.e., independent of $n$ for large $n$, and compute it explicitly for a wide class of jump distributions. In addition, we compute exactly the probability $Q(n)$ that the record increments decrease monotonically up to step $n$. Remarkably, $Q(n)$ is universal (i..e., independent of the jump distribution) for each $n$, decaying as $Q(n) \sim {\cal A}/\sqrt{n}$ for large $n$, with a universal amplitude ${\cal A} = e/\sqrtπ = 1.53362\ldots$.
△ Less
Submitted 18 July, 2016; v1 submitted 28 March, 2016;
originally announced March 2016.