-
Kinematics reconstruction in solenoidal spectrometers operated in active target mode
Authors:
Yassid Ayyad,
Adam K. Anthony,
Daniel Bazin,
Jie Chen,
Wolfgang Mittig,
Ben P. Kay,
David K. Sharp,
Juan Carlos Zamora
Abstract:
We discuss the reconstruction of low-energy nuclear reaction kinematics from charged-particle tracks in solenoidal spectrometers working in Active Target Time Projection Chamber mode. In this operation mode, reaction products are tracked within the active gas medium of the Active Target with a three dimensional space point cloud. We have inferred the reaction kinematics from the point cloud using…
▽ More
We discuss the reconstruction of low-energy nuclear reaction kinematics from charged-particle tracks in solenoidal spectrometers working in Active Target Time Projection Chamber mode. In this operation mode, reaction products are tracked within the active gas medium of the Active Target with a three dimensional space point cloud. We have inferred the reaction kinematics from the point cloud using an algorithm based on a linear quadratic estimator (Kalman filter). The performance of this algorithm has been evaluated using experimental data from nuclear reactions measured with the Active Target Time Projection Chamber (AT-TPC) detector.
△ Less
Submitted 13 September, 2023;
originally announced September 2023.
-
Novel Materials and Concepts for Next-Generation High Power Target Applications
Authors:
Kavin Ammigan,
Sujit Bidhar,
Frederique Pellemoine,
Vitaly Pronskikh,
David Pushka,
Katsuya Yonehara,
Robert Zwaska,
Adrien Couet,
Michael Moorehead,
Taku Ishida,
Shunsuke Makimura,
Christopher Densham,
Michael Fitton,
Eric Harvey-Fishenden,
Tristan Davenne,
David Jenkins,
Peter Loveridge,
Joe O'Dell,
Chris Rogers,
Dan Wilcox,
Marco Calviani,
Simone Gilardoni,
Francois-Xavier Nuiry,
Antonio Perillo-Marcone,
Nathan Bultman
, et al. (14 additional authors not shown)
Abstract:
Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materia…
▽ More
Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materials already limiting the scope of experiments, it is crucial to investigate novel target materials, technologies and concepts that will satisfy the requirements and maximize the physics benefits of future energy and intensity frontier experiments. This paper provides an overview of the related targetry R&D required over the next 10 years to support and enable future high-power accelerator target facilities.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Snowmass 2021 Instrumentation Frontier (IF5 - MPGDs) -- White Paper 2: Micro Pattern Gaseous Detectors for Nuclear Physics
Authors:
Fernando Barbosa,
Daniel Bazin,
Francesco Bossú,
Marco Cortesi,
Silvia Dalla Torre,
Sergey Furletov,
Yulia Furletova,
Paul Gueye,
Kondo Gnanvo,
Marcus Hohlmann,
Wolfgang Mittig,
Damien Neyret,
Matthiew Posik,
Christopher Wrede
Abstract:
Many current and future nuclear physics (NP) experiments across the United States have and are implementing micro-pattern gas detectors (MPGDs) to be used for tracking and PID purposes. MPGDs are capable of operating in high rate environments and providing excellent spatial resolution over a large-area with a low material budget. Summarized in this white paper is the role that MPGDs are playing in…
▽ More
Many current and future nuclear physics (NP) experiments across the United States have and are implementing micro-pattern gas detectors (MPGDs) to be used for tracking and PID purposes. MPGDs are capable of operating in high rate environments and providing excellent spatial resolution over a large-area with a low material budget. Summarized in this white paper is the role that MPGDs are playing in NP experiments and the R&D which is needed to meet the requirements of future NP experiments.
△ Less
Submitted 11 March, 2022;
originally announced March 2022.
-
Beam Particle Identification and Tagging of Incompletely Stripped Heavy Beams with HEIST
Authors:
A. K. Anthony,
C. Y. Niu,
R. S. Wang,
J. Wieske,
K. W. Brown,
Z. Chajecki,
W. G. Lynch,
Y. Ayyad,
J. Barney,
T. Baumann,
D. Bazin,
S. Beceiro-Novo,
J. Boza,
J. Chen,
K. J. Cook,
M. Cortesi,
T. Ginter,
W. Mittig,
A. Pype,
M. K. Smith,
C. Soto,
C. Sumithrarachchi,
J. Swaim,
S. Sweany,
F. C. E. Teh
, et al. (4 additional authors not shown)
Abstract:
A challenge preventing successful inverse kinematics measurements with heavy nuclei that are not fully stripped is identifying and tagging the beam particles. For this purpose, the HEavy ISotope Tagger (HEIST) has been developed. HEIST utilizes two micro-channel plate timing detectors to measure time of flight, a multi-sampling ion chamber to measure energy loss, and a high purity Ge detector to i…
▽ More
A challenge preventing successful inverse kinematics measurements with heavy nuclei that are not fully stripped is identifying and tagging the beam particles. For this purpose, the HEavy ISotope Tagger (HEIST) has been developed. HEIST utilizes two micro-channel plate timing detectors to measure time of flight, a multi-sampling ion chamber to measure energy loss, and a high purity Ge detector to identify isomer decays and calibrate the isotope identification system. HEIST has successfully identified $^{198}$Pb and other nearby nuclei at energies of about 75 MeV/A. In the experiment discussed, a typical cut containing 89\% of all $^{198}$Pb$^{+80}$ in the beam had a purity of 86\%. We examine the issues of charge state contamination. The observed charge state populations of these ions are presented and are moderately well described by the charge state model GLOBAL.
△ Less
Submitted 23 August, 2021; v1 submitted 28 July, 2021;
originally announced July 2021.
-
Development of the TIP-HOLE gas avalanche structure for nuclear physics/astrophysics applications with radioactive isotope beams: preliminary results
Authors:
Jaspreet Singh Randhawa,
Marco Cortesi,
Wolfgang Mittig,
Thomas Wierzbicki,
Alejandro Gomez
Abstract:
We discuss the operational principle and performance of new micro-pattern gaseous detectors based on the multi-layer Thick Gaseous Electron Multiplier (M-THGEM) concept coupled to a needle-like anode. The new gas avalanche structure aims at high-gain operation in nuclear physics and nuclear astrophysics applications with radioactive isotope beams. It is thereafter named TIP-HOLE gas amplifier, and…
▽ More
We discuss the operational principle and performance of new micro-pattern gaseous detectors based on the multi-layer Thick Gaseous Electron Multiplier (M-THGEM) concept coupled to a needle-like anode. The new gas avalanche structure aims at high-gain operation in nuclear physics and nuclear astrophysics applications with radioactive isotope beams. It is thereafter named TIP-HOLE gas amplifier, and consists of a THGEM or a two-layers M-THGEM mounted in a WELL configuration. The avalanche electrodes are collected by thin conductive needles (with up to a few ten um radius and a height of 100 um), located at the center of the hole and acting as point-like anode. The bottom area of the needle may be surrounded by a cylindrical cathode strip in order to increase the electron collection efficiency. The electric field lines from the drift region above the M-THGEM are focused into the holes, and then forced to converge on the needle tip. An extremely high field is reached at the top of the needle, creating a point-like avalanche process. Stable, high-gain operations in a wide range of pressures may be achieved at relatively low operational voltage, even in pure quencher gas at atmospheric pressure (e.g. pure isobutene). The TIP-HOLE structure may be produced by the innovative scalable additive manufacturing technology for large-area, multiple-layer printed circuit boards, recently developed by the UHV technology company (USA) and discussed for the first time in this work.
△ Less
Submitted 6 August, 2019; v1 submitted 16 July, 2019;
originally announced July 2019.
-
Beam induced space-charge effects in Time Projection Chambers in low-energy nuclear physics experiments
Authors:
J. S. Randhawa,
M. Cortesi,
Y. Ayyad,
W. Mittig,
T. Ahn,
D. Bazin,
S. Beceiro-Novo,
L. Carpenter,
K. J. Cook,
M. Dasgupta,
S. Henderson,
D. J. Hinde,
J. J. Kolata,
J. Sammut,
C. Santamaria,
N. Watwood,
A. Yeck
Abstract:
Tracking capabilities in Time Projection Chambers (TPCs) are strongly dictated by the homogeneity of the drift field. Ion back-flow in various gas detectors, mainly induced by the secondary ionization processes during amplification, has long been known as a source of drift field distortion. Here, we report on beam-induced space-charge effects from the primary ionization process in the drift region…
▽ More
Tracking capabilities in Time Projection Chambers (TPCs) are strongly dictated by the homogeneity of the drift field. Ion back-flow in various gas detectors, mainly induced by the secondary ionization processes during amplification, has long been known as a source of drift field distortion. Here, we report on beam-induced space-charge effects from the primary ionization process in the drift region in low-energy nuclear physics experiment with Active Target Time Projection Chamber (AT-TPC). A qualitative explanation of the observed effects is provided using detailed electron transport simulations. As ion mobility is a crucial factor in the space-charge effects, the need for a careful optimization of gas properties is highlighted. The impact of track distortion on tracking algorithm performance is also discussed.
△ Less
Submitted 16 July, 2019; v1 submitted 15 July, 2019;
originally announced July 2019.
-
Isotope Harvesting at FRIB: Additional opportunities for scientific discovery
Authors:
E. Paige Abel,
Mikael Avilov,
Virginia Ayres,
Eva Birnbaum,
Georg Bollen,
Greg Bonito,
Todd Bredeweg,
Hannah Clause,
Aaron Couture,
Joe DeVore,
Matt Dietrich,
Paul Ellison,
Jonathan Engle,
Richard Ferrieri,
Jonathan Fitzsimmons,
Moshe Friedman,
Dali Georgobiani,
Stephen Graves,
John Greene,
Suzanne Lapi,
C. Shaun Loveless,
Paul Mantica,
Tara Mastren,
Cecilia Martinez-Gomez,
Sean McGuinness
, et al. (15 additional authors not shown)
Abstract:
The Facility for Rare Isotope Beams (FRIB) at Michigan State University provides a unique opportunity to access some of the nation's most specialized scientific resources: radioisotopes. An excess of useful radioisotopes will be formed as FRIB fulfills its basic science mission of providing rare isotope beams. In order for the FRIB beams to reach high-purity, many of the isotopes are discarded and…
▽ More
The Facility for Rare Isotope Beams (FRIB) at Michigan State University provides a unique opportunity to access some of the nation's most specialized scientific resources: radioisotopes. An excess of useful radioisotopes will be formed as FRIB fulfills its basic science mission of providing rare isotope beams. In order for the FRIB beams to reach high-purity, many of the isotopes are discarded and go unused. If harvested, the unused isotopes could enable cutting-edge research for diverse applications ranging from medical therapy and diagnosis to nuclear security. Given that FRIB will have the capability to create about 80 percent of all possible atomic nuclei, harvesting at FRIB will provide a fast path for access to a vast array of isotopes of interest in basic and applied science investigations. To fully realize this opportunity, infrastructure investment is required to enable harvesting and purification of otherwise unused isotopes. An investment in isotope harvesting at FRIB will provide the nation with a powerful resource for development of crucial isotope applications.
△ Less
Submitted 7 December, 2018;
originally announced December 2018.
-
Automatic trajectory recognition in Active Target Time Projection Chambers data by means of hierarchical clustering
Authors:
Christoph Dalitz,
Yassid Ayyad,
Jens Wilberg,
Lukas Aymans,
Daniel Bazin,
Wolfgang Mittig
Abstract:
The automatic reconstruction of three-dimensional particle tracks from Active Target Time Projection Chambers data can be a challenging task, especially in the presence of noise. In this article, we propose a non-parametric algorithm that is based on the idea of clustering point triplets instead of the original points. We define an appropriate distance measure on point triplets and then apply a si…
▽ More
The automatic reconstruction of three-dimensional particle tracks from Active Target Time Projection Chambers data can be a challenging task, especially in the presence of noise. In this article, we propose a non-parametric algorithm that is based on the idea of clustering point triplets instead of the original points. We define an appropriate distance measure on point triplets and then apply a single-link hierarchical clustering on the triplets. Compared to parametric approaches like RANSAC or the Hough transform, the new algorithm has the advantage of potentially finding trajectories even of shapes that are not known beforehand. This feature is particularly important in low-energy nuclear physics experiments with Active Targets operating inside a magnetic field. The algorithm has been validated using data from experiments performed with the Active Target Time Projection Chamber developed at the National Superconducting Cyclotron Laboratory (NSCL).The results demonstrate the capability of the algorithm to identify and isolate particle tracks that describe non-analytical trajectories. For curved tracks, the vertex detection recall was 86\% and the precision 94\%. For straight tracks, the vertex detection recall was 96\% and the precision 98\%. In the case of a test set containing only straight linear tracks, the algorithm performed better than an iterative Hough transform.
△ Less
Submitted 20 August, 2018; v1 submitted 10 July, 2018;
originally announced July 2018.
-
Multi-layer Thick Gas Electron Multiplier (M-THGEM): a new MPDG structure for high-gain operation at low-pressure
Authors:
M. Cortesi,
S. Rost,
W. Mittig,
Y. Ayyad Limonge,
D. Bazin,
J. Yurkon,
A. Stolz
Abstract:
The operating principle and performances of the Multi-layer Thick Gaseous Electron Multiplier (M-THGEM) is presented. The M-THGEM is a novel hole-type gaseous electron multiplier produced by multi-layer printed circuit board technology; it consists of a densely perforated assembly of multiple insulating substrate sheets (e.g., FR-4), sandwiched between thin metallic-electrode layers. The electron…
▽ More
The operating principle and performances of the Multi-layer Thick Gaseous Electron Multiplier (M-THGEM) is presented. The M-THGEM is a novel hole-type gaseous electron multiplier produced by multi-layer printed circuit board technology; it consists of a densely perforated assembly of multiple insulating substrate sheets (e.g., FR-4), sandwiched between thin metallic-electrode layers. The electron avalanche processes occur along the successive multiplication stages within the M-THGEM holes, under the action of strong dipole fields resulting from the application of suitable potential differences between the electrodes. The present work focuses on investigation of two different geometries: a two-layer M-THGEM (either as single or double-cascade detector) and a single three-layer M-THGEM element, tested in various low-pressure He-based gas mixtures. The intrinsically robust confinement of the avalanche volume within the M-THGEM holes provides an efficient suppression of the photon-induced secondary effects, resulting in a high-gain operation over a broad pressure range, even in pure noble gas. The operational principle, main properties (maximum achievable gain, long-term stability, energy resolution, etc.) under different irradiation conditions, as well as capabilities and potential applications are discussed.
△ Less
Submitted 23 June, 2016;
originally announced June 2016.
-
Recent advances with a hybrid micro-pattern gas detector operated in low pressure H2 and He, for AT-TPC applications
Authors:
Marco Cortesi,
Wolfgang Mittig,
Daniel Bazin,
Saul Beceiro-Novo,
John Yurkon,
Rim Soussi Tanani,
Michael Wolff,
Andreas Stolz
Abstract:
In view of a possible application as a charge-particle track readout for an Active-Target Time Projection Chamber (AT-TPC), the operational properties and performances of a hybrid Micro-Pattern Gaseous Detector (MPGD) were investigated in pure low-pressure Hydrogen (H2) and Helium (He). The detector consists of a MICROMesh GAseous Structure (MICROMEGAS) coupled to a single- or multi-cascade THick…
▽ More
In view of a possible application as a charge-particle track readout for an Active-Target Time Projection Chamber (AT-TPC), the operational properties and performances of a hybrid Micro-Pattern Gaseous Detector (MPGD) were investigated in pure low-pressure Hydrogen (H2) and Helium (He). The detector consists of a MICROMesh GAseous Structure (MICROMEGAS) coupled to a single- or multi-cascade THick Gaseous Electron Multiplier (THGEM) as a pre-amplification stage. This study reports of the effective gain dependence of the hybrid-MPGD at relevant pressure (in the range of 200-760 torr) for different detector arrangements. The results of this work are relevant in the field of avalanche mechanism in low-pressure, low-mass noble gases, in particularly for applications of MPGD end-cap readout for active-target Time Projection Chambers (TPC) in the field of nuclear physics and nuclear astrophysics.
△ Less
Submitted 22 December, 2015;
originally announced December 2015.
-
Disappearance of Mott oscillations in sub-barrier elastic scattering of identical nuclei and atomic ions
Authors:
M. S. Hussein,
L. F. Canto,
R. Donangelo,
W. Mittig
Abstract:
The scattering of identical nuclei at low energies exhibits conspicuous Mott oscillations which can be used to investigate the presence of components in the predominantly Coulomb interaction arising from several physical effects. It is found that at a certain critical value of the Sommerfeld parameter the Mott oscillations disappear and the cross section becomes quite flat. We call this effect Tra…
▽ More
The scattering of identical nuclei at low energies exhibits conspicuous Mott oscillations which can be used to investigate the presence of components in the predominantly Coulomb interaction arising from several physical effects. It is found that at a certain critical value of the Sommerfeld parameter the Mott oscillations disappear and the cross section becomes quite flat. We call this effect Transverse Isotropy (TI). The critical value of the Sommerfeld parameter at which TI sets in is found to be $η_{c} = \sqrt{3s +2}$, where $s$ is the spin of the nuclei participating in the scattering. No TI is found in the Mott scattering of identical Fermionic nuclei. The critical center of mass energy corresponding to $η_c$ is found to be $E_c$ = 0.40 MeV for $α+ α$ (s = 0) , 1.2 MeV for $^{6}$Li + $^{6}$LI (s = 1) and 7.1 MeV for $^{10}$B + $^{10}$B (s = 3). We further found that the inclusion of the nuclear interaction induces a significant modification in the TI. We suggest measurements at these sub-barrier energies for the purpose of extracting useful information about the nuclear interaction between light heavy ions. We also suggest extending the study of the TI to the scattering of identical atomic ions.
△ Less
Submitted 12 December, 2015;
originally announced December 2015.
-
Studies of THGEM-based detector at low-pressure Hydrogen/Deuterium, for AT-TPC applications
Authors:
Marco Cortesi,
John Yurkon,
Wolfgang Mittig,
Daniel Bazin,
Saul Beceiro-Novo,
Andreas Stolz
Abstract:
We study the performance of single- and double- THick Gas Electron Multiplier (THGEM) detectors in pure Hydrogen and Deuterium at low pressures, in the range of 100-450 Torr. The effect of the pressure on the maximum achievable gain, ion-back flow and long-term gain stability are investigated for single and double cascade detectors. In particular, it was found that maximum achievable gains above 1…
▽ More
We study the performance of single- and double- THick Gas Electron Multiplier (THGEM) detectors in pure Hydrogen and Deuterium at low pressures, in the range of 100-450 Torr. The effect of the pressure on the maximum achievable gain, ion-back flow and long-term gain stability are investigated for single and double cascade detectors. In particular, it was found that maximum achievable gains above 10^4, from single-photoelectrons avalanche, can be achieved for pressures of 200 Torr and above; for lower pressure the gains are limited by avalanche-induced secondary effects to a values of around 103. The results of this work are relevant in the field of avalanche mechanism in low-pressure, low-mass noble gases, in particular for applications of THGEM end-cap readout for active-target Time Projection Chambers (TPC) in the field of nuclear physics and nuclear astrophysics.
△ Less
Submitted 18 November, 2015;
originally announced November 2015.
-
Tracking algorithms for the active target MAYA
Authors:
T. Roger,
M. Caamaño,
C. E. Demonchy,
W. Mittig,
H. Savajols,
I. Tanihata
Abstract:
The MAYA detector is a Time-Charge Projection Chamber based on the concept of active target. These type of devices use a part of the detection system, the filling gas in this case, in the role of reaction target. The MAYA detector performs three-dimensional tracking, in order to determine physical observables of the reactions occurring inside the detector. The reconstruction algorithms of the trac…
▽ More
The MAYA detector is a Time-Charge Projection Chamber based on the concept of active target. These type of devices use a part of the detection system, the filling gas in this case, in the role of reaction target. The MAYA detector performs three-dimensional tracking, in order to determine physical observables of the reactions occurring inside the detector. The reconstruction algorithms of the tracking use the information from a two-dimensional projection on the segmented cathode, and, in general, they need to be adapted for the different experimental settings of the detector. This work presents some of the most relevant solutions developed for the MAYA detector.
△ Less
Submitted 19 January, 2011; v1 submitted 16 December, 2010;
originally announced December 2010.
