-
Integrated photonic nonreciprocal devices based on susceptibility-programmable medium
Authors:
Yan-Lei Zhang,
Ming Li,
Xin-Biao Xu,
Zhu-Bo Wang,
Chun-Hua Dong,
Guang-Can Guo,
Chang-Ling Zou,
Xu-Bo Zou
Abstract:
The switching and control of optical fields based on nonlinear optical effects are often limited to relatively weak nonlinear susceptibility and strong optical pump fields. Here, an optical medium with programmable susceptibility tensor based on polarizable atoms is proposed. Under a structured optical pump, the ground state population of atoms could be efficiently controlled by tuning the chirali…
▽ More
The switching and control of optical fields based on nonlinear optical effects are often limited to relatively weak nonlinear susceptibility and strong optical pump fields. Here, an optical medium with programmable susceptibility tensor based on polarizable atoms is proposed. Under a structured optical pump, the ground state population of atoms could be efficiently controlled by tuning the chirality and intensity of optical fields, and thus the optical response of the medium is programmable in both space and time. We demonstrate the potential of this approach by engineering the spatial distribution of the complex susceptibility tensor of the medium in photonic structures to realize nonreciprocal optical effects. Specifically, we investigate the advantages of chiral interaction between atoms and photons in an atom-cladded waveguide, theoretically showing that reconfigurable, strong, and fastly switchable isolation of optical signals in a selected optical mode is possible. The susceptibility-programmable medium provides a promising way to efficiently control the optical field, opening up a wide range of applications for integrated photonic devices and structured optics.
△ Less
Submitted 2 September, 2024;
originally announced September 2024.
-
A novel effective technique for charge neutralization on bulk insulator surfaces in XPS measurements by introducing UV light irradiation
Authors:
Lei Zhu,
Yunguo Yang,
Jianhua Cai,
Xuefeng Xu,
Liran Ma,
Jianbin Luo
Abstract:
When XPS analyses are performed on insulator surfaces, shift and deformation of spectra peaks typically take place due to the surface charging. To achieve reliable XPS measurements, neutralization techniques have been widely adopted but their effectiveness are still limited, and thus, new neutralization technologies are urgently needed. Here, stable XPS spectra in which all the peaks undergo a red…
▽ More
When XPS analyses are performed on insulator surfaces, shift and deformation of spectra peaks typically take place due to the surface charging. To achieve reliable XPS measurements, neutralization techniques have been widely adopted but their effectiveness are still limited, and thus, new neutralization technologies are urgently needed. Here, stable XPS spectra in which all the peaks undergo a reduced and nearly constant shift without significant deformation and broadening were obtained by introducing the UV light irradiation, implying that the introduction of the UV light can not only greatly attenuate the strength but also significantly improve both the temporal stability and the spatial uniformity of the surface charging during XPS measurements. This phenomenon, referred to as UV-assisted neutralization in this article, was found as effective as the most commonly used dual beam charge neutralization. Further observations show that the suppression of the charging issue comes from the adsorption of the UV-excited photoelectrons onto the X-ray irradiation region. This neutralization method, combined with the binding energy referencing, can be expected to become a promising alternative technique for solving the charging issues in XPS measurements.
△ Less
Submitted 1 September, 2024;
originally announced September 2024.
-
Data-Driven Parametrization of Molecular Mechanics Force Fields for Expansive Chemical Space Coverage
Authors:
Tianze Zheng,
Ailun Wang,
Xu Han,
Yu Xia,
Xingyuan Xu,
Jiawei Zhan,
Yu Liu,
Yang Chen,
Zhi Wang,
Xiaojie Wu,
Sheng Gong,
Wen Yan
Abstract:
A force field is a critical component in molecular dynamics simulations for computational drug discovery. It must achieve high accuracy within the constraints of molecular mechanics' (MM) limited functional forms, which offers high computational efficiency. With the rapid expansion of synthetically accessible chemical space, traditional look-up table approaches face significant challenges. In this…
▽ More
A force field is a critical component in molecular dynamics simulations for computational drug discovery. It must achieve high accuracy within the constraints of molecular mechanics' (MM) limited functional forms, which offers high computational efficiency. With the rapid expansion of synthetically accessible chemical space, traditional look-up table approaches face significant challenges. In this study, we address this issue using a modern data-driven approach, developing ByteFF, an Amber-compatible force field for drug-like molecules. To create ByteFF, we generated an expansive and highly diverse molecular dataset at the B3LYP-D3(BJ)/DZVP level of theory. This dataset includes 2.4 million optimized molecular fragment geometries with analytical Hessian matrices, along with 3.2 million torsion profiles. We then trained an edge-augmented, symmetry-preserving molecular graph neural network (GNN) on this dataset, employing a carefully optimized training strategy. Our model predicts all bonded and non-bonded MM force field parameters for drug-like molecules simultaneously across a broad chemical space. ByteFF demonstrates state-of-the-art performance on various benchmark datasets, excelling in predicting relaxed geometries, torsional energy profiles, and conformational energies and forces. Its exceptional accuracy and expansive chemical space coverage make ByteFF a valuable tool for multiple stages of computational drug discovery.
△ Less
Submitted 22 August, 2024;
originally announced August 2024.
-
Uncovering multi-order Popularity and Similarity Mechanisms in Link Prediction by graphlet predictors
Authors:
Yong-Jian He,
Yijun Ran,
Zengru Di,
Tao Zhou,
Xiao-Ke Xu
Abstract:
Link prediction has become a critical problem in network science and has thus attracted increasing research interest. Popularity and similarity are two primary mechanisms in the formation of real networks. However, the roles of popularity and similarity mechanisms in link prediction across various domain networks remain poorly understood. Accordingly, this study used orbit degrees of graphlets to…
▽ More
Link prediction has become a critical problem in network science and has thus attracted increasing research interest. Popularity and similarity are two primary mechanisms in the formation of real networks. However, the roles of popularity and similarity mechanisms in link prediction across various domain networks remain poorly understood. Accordingly, this study used orbit degrees of graphlets to construct multi-order popularity- and similarity-based network link predictors, demonstrating that traditional popularity- and similarity-based indices can be efficiently represented in terms of orbit degrees. Moreover, we designed a supervised learning model that fuses multiple orbit-degree-based features and validated its link prediction performance. We also evaluated the mean absolute Shapley additive explanations of each feature within this model across 550 real-world networks from six domains. We observed that the homophily mechanism, which is a similarity-based feature, dominated social networks, with its win rate being 91\%. Moreover, a different similarity-based feature was prominent in economic, technological, and information networks. Finally, no single feature dominated the biological and transportation networks. The proposed approach improves the accuracy and interpretability of link prediction, thus facilitating the analysis of complex networks.
△ Less
Submitted 18 August, 2024;
originally announced August 2024.
-
Effective and efficient modeling of the hydrodynamics for bacterial flagella
Authors:
Baopi Liu,
Lu Chen,
Ji Zhang,
Xinliang Xu
Abstract:
The hydrodynamic interactions between bacterial flagella and surrounding boundaries are important for bacterial motility and gait in complex environment. By modeling each flagellar filament that is both thin and long as a string of spheres, we show that such hydrodynamic interactions can be accurately described through a resistance tensor, which can be efficiently evaluated numerically. For the ca…
▽ More
The hydrodynamic interactions between bacterial flagella and surrounding boundaries are important for bacterial motility and gait in complex environment. By modeling each flagellar filament that is both thin and long as a string of spheres, we show that such hydrodynamic interactions can be accurately described through a resistance tensor, which can be efficiently evaluated numerically. For the case of close interaction between one bacterium and one passive colloidal sphere, we see notable difference between results from our model and those from the resistive force theory, showing that the error arises from negligence of the width of flagellar filaments in resistive force theory can be strong.
△ Less
Submitted 13 August, 2024; v1 submitted 12 August, 2024;
originally announced August 2024.
-
Constructing accurate and efficient general-purpose atomistic machine learning model with transferable accuracy for quantum chemistry
Authors:
Yicheng Chen,
Wenjie Yan,
Zhanfeng Wang,
Jianming Wu,
Xin Xu
Abstract:
Density Functional Theory (DFT) has been a cornerstone in computational science, providing powerful insights into structure-property relationships for molecules and materials through first-principles quantum-mechanical (QM) calculations. However, the advent of atomistic machine learning (ML) is reshaping the landscape by enabling large-scale dynamics simulations and high-throughput screening at DF…
▽ More
Density Functional Theory (DFT) has been a cornerstone in computational science, providing powerful insights into structure-property relationships for molecules and materials through first-principles quantum-mechanical (QM) calculations. However, the advent of atomistic machine learning (ML) is reshaping the landscape by enabling large-scale dynamics simulations and high-throughput screening at DFT-equivalent accuracy with drastically reduced computational cost. Yet, the development of general-purpose atomistic ML models as surrogates for QM calculations faces several challenges, particularly in terms of model capacity, data efficiency, and transferability across chemically diverse systems. This work introduces a novel extension of the polarizable atom interaction neural network (namely, XPaiNN) to address these challenges. Two distinct training strategies have been employed, one direct-learning and the other $Δ$-ML on top of a semi-empirical QM method. These methodologies have been implemented within the same framework, allowing for a detailed comparison of their results. The XPaiNN models, in particular the one using $Δ$-ML, not only demonstrate competitive performance on standard benchmarks, but also demonstrate the effectiveness against other ML models and QM methods on comprehensive downstream tasks, including non-covalent interactions, reaction energetics, barrier heights, geometry optimization and reaction thermodynamics, etc. This work represents a significant step forward in the pursuit of accurate and efficient atomistic ML models of general-purpose, capable of handling complex chemical systems with transferable accuracy.
△ Less
Submitted 12 August, 2024;
originally announced August 2024.
-
FuXi Weather: An end-to-end machine learning weather data assimilation and forecasting system
Authors:
Xiuyu Sun,
Xiaohui Zhong,
Xiaoze Xu,
Yuanqing Huang,
Hao Li,
Jie Feng,
Wei Han,
Libo Wu,
Yuan Qi
Abstract:
Operational numerical weather prediction systems consist of three fundamental components: the global observing system for data collection, data assimilation for generating initial conditions, and the forecasting model to predict future weather conditions. While NWP have undergone a quiet revolution, with forecast skills progressively improving over the past few decades, their advancement has slowe…
▽ More
Operational numerical weather prediction systems consist of three fundamental components: the global observing system for data collection, data assimilation for generating initial conditions, and the forecasting model to predict future weather conditions. While NWP have undergone a quiet revolution, with forecast skills progressively improving over the past few decades, their advancement has slowed due to challenges such as high computational costs and the complexities associated with assimilating an increasing volume of observational data and managing finer spatial grids. Advances in machine learning offer an alternative path towards more efficient and accurate weather forecasts. The rise of machine learning based weather forecasting models has also spurred the development of machine learning based DA models or even purely machine learning based weather forecasting systems. This paper introduces FuXi Weather, an end-to-end machine learning based weather forecasting system. FuXi Weather employs specialized data preprocessing and multi-modal data fusion techniques to integrate information from diverse sources under all-sky conditions, including microwave sounders from 3 polar-orbiting satellites and radio occultation data from Global Navigation Satellite System. Operating on a 6-hourly DA and forecasting cycle, FuXi Weather independently generates robust and accurate 10-day global weather forecasts at a spatial resolution of 0.25\textdegree. It surpasses the European Centre for Medium-range Weather Forecasts high-resolution forecasts in terms of predictability, extending the skillful forecast lead times for several key weather variables such as the geopotential height at 500 hPa from 9.25 days to 9.5 days. The system's high computational efficiency and robust performance, even with limited observations, demonstrates its potential as a promising alternative to traditional NWP systems.
△ Less
Submitted 10 August, 2024;
originally announced August 2024.
-
Robust characterization of photonic integrated circuits
Authors:
Jiajia Wang,
Xingyuan Xu,
Haoran Zhang,
Xuecheng Zeng,
Yunping Bai,
Arthur J. Lowery,
Kun Xu
Abstract:
Photonic integrated circuits (PICs) offer ultra-broad optical bandwidths that enable unprecedented data throughputs for signal processing applications. Dynamic reconfigurability enables compensation of fabrication flaws and fluctuating external environments, tuning for adaptive equalization and training of optical neural networks. The initial step in PIC reconfiguration entails measuring its dynam…
▽ More
Photonic integrated circuits (PICs) offer ultra-broad optical bandwidths that enable unprecedented data throughputs for signal processing applications. Dynamic reconfigurability enables compensation of fabrication flaws and fluctuating external environments, tuning for adaptive equalization and training of optical neural networks. The initial step in PIC reconfiguration entails measuring its dynamic performance, often described by its frequency response. While measuring the amplitude response is straightforward, e.g. using a tunable laser and optical power meter, measuring the phase response presents challenges due to various factors, including phase variations in test connections and instrumentation limitations. To address these challenges, a universal and robust characterization technique is proposed, which uses an on-chip reference path coupled to the signal processing core (SPC), with a delay larger or smaller than the total delay across the signal processing paths. A Fourier transform of the chip's power response reveals the SPC's impulse response. The method is more robust against low reference-path power and imprecise delays. Experiments using a finite-impulse-response (FIR) structure demonstrate rapid SPC training, overcoming thermal crosstalk and device imperfections. This approach offers a promising solution for PIC characterization, facilitating expedited physical parameter training for advanced applications in communications and optical neural networks.
△ Less
Submitted 7 August, 2024;
originally announced August 2024.
-
Construction of various time-dependent Hamiltonians on a single photonic chip
Authors:
Rui Ye,
Guangzhen Li,
Shuai Wan,
Xiaotian Xue,
Piyu Wang,
Xin Qiao,
Hao Li,
Shijie Liu,
Jiayu Wang,
Rui Ma,
Fang Bo,
Yuanlin Zheng,
Chunhua Dong,
Luqi Yuan,
Xianfeng Chen
Abstract:
Integrated photonics provides an important platform for simulating physical models with high-performance chip-scale devices, where the lattice size and the time-dependence of a model are key ingredients for further enriching the functionality of a photonic chip. Here, we propose and demonstrate the construction of various time-dependent Hamiltonian models using a single microresonator on thin-film…
▽ More
Integrated photonics provides an important platform for simulating physical models with high-performance chip-scale devices, where the lattice size and the time-dependence of a model are key ingredients for further enriching the functionality of a photonic chip. Here, we propose and demonstrate the construction of various time-dependent Hamiltonian models using a single microresonator on thin-film lithium niobate chip. Such an integrated microresonator holds high quality factor to 10^6, and supports the construction of the synthetic frequency lattice with effective lattice sites up to 152 under the electro-optic modulation. By further applying a bichromatic modulation composed of two radio-frequency signals oppositely detuned from the resonant frequency in the microresonator, we build different time-dependent Hamiltonians with the time-varying nearest-neighbor coupling strength in synthetic frequency lattice. We measure the temporal features from capturing the dynamic band structures of the lattice and demonstrate a variety of time-dependent synthetic lattice models by engineering the driven pattern of the modulation, highlighting great flexibility of the microresonator. Our work shows a photonic chip for simulating versatile time-dependent Hamiltonians, which pushes forward quantum simulations in integrated photonics with great experimental tunability and reconfigurability.
△ Less
Submitted 1 August, 2024;
originally announced August 2024.
-
Simulation Method of Microscale Fluid-Structure Interactions: Diffuse-Resistance-Domain Approach
Authors:
Min Gao,
Zhihao Li,
Xinpeng Xu
Abstract:
Direct numerical simulations (DNS) of microscale fluid-structure interactions (mFSI) in multicomponent multiphase flows pose many challenges such as the thermodynamic consistency of multiphysics couplings, the tracking of moving interfaces, and the dynamics of moving triple-phase contact lines. We propose and validate a generic DNS approach: Diffuse-Resistance-Domain (DRD). It overcomes the above…
▽ More
Direct numerical simulations (DNS) of microscale fluid-structure interactions (mFSI) in multicomponent multiphase flows pose many challenges such as the thermodynamic consistency of multiphysics couplings, the tracking of moving interfaces, and the dynamics of moving triple-phase contact lines. We propose and validate a generic DNS approach: Diffuse-Resistance-Domain (DRD). It overcomes the above challenges by employing Onsager's principle to formulate dynamic models and combining traditional diffuse-interface models for fluid-fluid interfacial dynamics with a novel implementation of complex fluid-solid interfacial conditions via smooth interpolations of dynamic-resistance coefficients across interfaces. After careful validation by benchmark simulations, we simulated three challenging mFSI problems taken from different fields.
△ Less
Submitted 19 July, 2024;
originally announced July 2024.
-
Nonreciprocal Single-Photon Band Structure in a Coupled-Spinning-Resonator chain
Authors:
Jing Li,
Ya Yang,
Xun Wei Xu,
Jing Lu,
Hui Jing,
Lan Zhou
Abstract:
We analyze the single-photon band structure and the transport of a single photon in a one-dimensional coupled-spinning-resonator chain. The time-reversal symmetry of the resonators chain is broken by the spinning of the resonators, instead of external or synthetic magnetic field. Two nonreciprocal single-photon band gaps can be obtained in the coupled-spinning-resonator chain, whose width depends…
▽ More
We analyze the single-photon band structure and the transport of a single photon in a one-dimensional coupled-spinning-resonator chain. The time-reversal symmetry of the resonators chain is broken by the spinning of the resonators, instead of external or synthetic magnetic field. Two nonreciprocal single-photon band gaps can be obtained in the coupled-spinning-resonator chain, whose width depends on the angular velocity of the spinning resonator. Based on the nonreciprocal band gaps, we can implement a single photon circulator at multiple frequency windows, and the direction of photon cycling is opposite for different band gaps. In addition, reciprocal single-photon band structures can also be realized in the coupled-spinning-resonator chain when all resonators rotate in the same direction with equal angular velocity. Our work open a new route to achieve, manipulate, and switch nonreciprocal or reciprocal single-photon band structures, and provides new opportunities to realize novel single-photon devices.
△ Less
Submitted 15 July, 2024;
originally announced July 2024.
-
Dynamic-Mode Decomposition of Geostrophically Balanced and Unbalanced Motions from SWOT
Authors:
Takaya Uchida,
Yadidya Badarvada,
Karl E. Lapo,
Xiaobiao Xu,
Brian K. Arbic,
Dimitris Menemenlis,
Luna Hiron,
Eric P. Chassignet,
Jay F. Shriver
Abstract:
The decomposition of oceanic flow into its balanced and unbalanced motions carries theoretical and practical significance for the oceanographic community. These two motions have distinct dynamical characteristics and affect the transport of tracers differently from one another. The launch of Surface Water and Ocean Topography (SWOT) satellite provides a prime opportunity to diagnose the surface ba…
▽ More
The decomposition of oceanic flow into its balanced and unbalanced motions carries theoretical and practical significance for the oceanographic community. These two motions have distinct dynamical characteristics and affect the transport of tracers differently from one another. The launch of Surface Water and Ocean Topography (SWOT) satellite provides a prime opportunity to diagnose the surface balanced and unbalanced motions on a global scale at an unprecedented spatial resolution. Here, we apply dynamic-mode decomposition (DMD), a linear-algebraic data-driven method, to a tidally-forced numerical simulation and one-day-repeat SWOT observations of sea-surface height (SSH) in the Gulf Stream extension. DMD is able to separate out the spatial modes associated with sub-inertial periods from super-inertial periods. The sub-inertial modes of DMD can be used to extract geostrophically balanced motions from SSH fields, which have an imprint of internal tides.
△ Less
Submitted 12 July, 2024;
originally announced July 2024.
-
Purity benchmarking study of error coherence in a single Xmon qubit
Authors:
Auda Zhu,
Jérémy H. Béjanin,
Xicheng Xu,
Matteo Mariantoni
Abstract:
In this study, we employ purity benchmarking (PB) to explore the dynamics of gate noise in a superconducting qubit system. Over 1110 hours of observations on an Xmon qubit, we simultaneously measure the coherence noise budget across two different operational frequencies. We find that incoherent errors, which predominate in overall error rates, exhibit minimal frequency dependence, suggesting they…
▽ More
In this study, we employ purity benchmarking (PB) to explore the dynamics of gate noise in a superconducting qubit system. Over 1110 hours of observations on an Xmon qubit, we simultaneously measure the coherence noise budget across two different operational frequencies. We find that incoherent errors, which predominate in overall error rates, exhibit minimal frequency dependence, suggesting they are primarily due to wide-band, diffusive incoherent error sources. In contrast, coherent errors, although less prevalent, show significant sensitivity to operational frequency variations and telegraphic noise. We speculate that this sensitivity is due to interactions with a single strongly coupled environmental defect -- modeled as a two-level system -- which influences qubit control parameters and causes coherent calibration errors. Our results also demonstrate that PB offers improved sensitivity, capturing additional dynamics that conventional relaxation time measurements cannot detect, thus presenting a more comprehensive method for capturing dynamic interactions within quantum systems. The intricate nature of these coherence dynamics underscores the need for further research.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Higher-order Fuzzy Membership in Motif Modularity Optimization
Authors:
Jing Xiao,
Ya-Wei Wei,
Xiao-Ke Xu
Abstract:
Higher-order community detection (HCD) reveals both mesoscale structures and functional characteristics of real-life networks. Although many methods have been developed from diverse perspectives, to our knowledge, none can provide fine-grained higher-order fuzzy community information. This study presents a novel concept of higher-order fuzzy memberships that quantify the membership grades of motif…
▽ More
Higher-order community detection (HCD) reveals both mesoscale structures and functional characteristics of real-life networks. Although many methods have been developed from diverse perspectives, to our knowledge, none can provide fine-grained higher-order fuzzy community information. This study presents a novel concept of higher-order fuzzy memberships that quantify the membership grades of motifs to crisp higher-order communities, thereby revealing the partial community affiliations. Furthermore, we employ higher-order fuzzy memberships to enhance HCD via a general framework called fuzzy memberships assisted motif-based evolutionary modularity (FMMEM). In FFMEM, on the one hand, a fuzzy membership-based neighbor community modification (FM-NCM) strategy is designed to correct misassigned bridge nodes, thereby improving partition quality. On the other hand, a fuzzy membership-based local community merging (FM-LCM) strategy is also proposed to combine excessively fragmented communities for enhancing local search ability. Experimental results indicate that the FMMEM framework outperforms state-of-the-art methods in both synthetic and real-world datasets, particularly in the networks with ambiguous and complex structures.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
Global calibration of large-scale photonic integrated circuits
Authors:
Jin-Hao Zheng,
Qin-Qin Wang,
Lan-Tian Feng,
Yu-Yang Ding,
Xiao-Ye Xu,
Xi-Feng Ren,
Chuan-Feng Li,
Guang-Can Guo
Abstract:
The advancing maturity of photonic integrated circuit (PIC) fabrication technology enables the high integration of an increasing number of optical components onto a single chip. With the incremental circuit complexity, the calibration of active phase shifters in a large-scale PIC becomes a crucially important issue. The traditional one-by-one calibration techniques encounter significant hurdles wi…
▽ More
The advancing maturity of photonic integrated circuit (PIC) fabrication technology enables the high integration of an increasing number of optical components onto a single chip. With the incremental circuit complexity, the calibration of active phase shifters in a large-scale PIC becomes a crucially important issue. The traditional one-by-one calibration techniques encounter significant hurdles with the propagation of calibration errors, and achieving the decoupling of all phase shifters for independent calibration is not straightforward. To address this issue, we propose a machine-learning approach for globally calibrating the large-scale PIC. Our method utilizes a custom network to simultaneously learn the nonlinear phase-current relations for all thermo-optic phase shifters on the PIC by minimizing the negative likelihood of the measurement datasets. Moreover, the reflectivities of all static beamsplitter components can also be synchronizedly extracted using this calibration method. As an example, a quantum walk PIC with a circuit depth of 12 is calibrated, and a programmable discrete-time quantum walk is experimentally demonstrated. These results will greatly benefit the applications of large-scale PICs in photonic quantum information processing.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Generation of spatiotemporal acoustic vortices with arbitrarily oriented orbital angular momentum
Authors:
Shuai Liu,
Hao Ge,
Xiang-Yuan Xu,
Yuan Sun,
Xiao-Ping Liu,
Ming-Hui Lu,
Yan-Feng Chen
Abstract:
Despite extensive exploration of acoustic vortices carrying orbital angular momentum (OAM), the generation of acoustic vortices with OAM orientations beyond the conventional longitudinal direction remains largely unexplored. Spatiotemporal (ST) vortices, featuring spiral phase twisting in the ST domain and carrying transverse OAM, have recently attracted considerable interest in optics and acousti…
▽ More
Despite extensive exploration of acoustic vortices carrying orbital angular momentum (OAM), the generation of acoustic vortices with OAM orientations beyond the conventional longitudinal direction remains largely unexplored. Spatiotemporal (ST) vortices, featuring spiral phase twisting in the ST domain and carrying transverse OAM, have recently attracted considerable interest in optics and acoustics. Here, we report the generation of three-dimensional (3D) ST acoustic vortices with arbitrarily oriented OAM, thereby opening up a new dimension in acoustic OAM control. By utilizing a two-dimensional (2D) acoustic phased array, we introduce two approaches to manipulate the orientation of OAM: through the direct rotation of vortices in 3D space and the intersection of vortices carrying distinct types of OAM. These methods enable unprecedented control over the orientation of acoustic OAM, providing a new degree of freedom in the manipulation of acoustic waves. The arbitrarily oriented OAM holds promise for enhancing acoustic communication by broadening capacity and enabling more complex particle manipulation techniques. Our work establishes a foundation for future explorations into the complex dynamics of novel structured acoustic fields in the ST domain.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Plasmonic polarization sensing of electrostatic superlattice potentials
Authors:
Shuai Zhang,
Jordan Fonseca,
Daniel Bennett,
Zhiyuan Sun,
Junhe Zhang,
Ran Jing,
Suheng Xu,
Leo He,
S. L. Moore,
S. E. Rossi,
Dmitry Ovchinnikov,
David Cobden,
Pablo. Jarillo-Herrero,
M. M. Fogler,
Philip Kim,
Efthimios Kaxiras,
Xiaodong Xu,
D. N. Basov
Abstract:
Plasmon polaritons are formed by coupling light with delocalized electrons. The half-light and half-matter nature of plasmon polaritons endows them with unparalleled tunability via a range of parameters, such as dielectric environments and carrier density. Therefore, plasmon polaritons are expected to be tuned when in proximity to polar materials since the carrier density is tuned by an electrosta…
▽ More
Plasmon polaritons are formed by coupling light with delocalized electrons. The half-light and half-matter nature of plasmon polaritons endows them with unparalleled tunability via a range of parameters, such as dielectric environments and carrier density. Therefore, plasmon polaritons are expected to be tuned when in proximity to polar materials since the carrier density is tuned by an electrostatic potential; conversely, the plasmon polariton response might enable the sensing of polarization. Here, we use infrared nano-imaging and nano-photocurrent measurements to investigate heterostructures composed of graphene and twisted hexagonal boron nitride (t-BN), with alternating polarization in a triangular network of moiré stacking domains. We observe that the carrier density and the corresponding plasmonic response of graphene are modulated by polar domains in t-BN. In addition, we demonstrate that the nanometer-wide domain walls of graphene moirés superlattices, created by the polar domains of t-BN, provide momenta to assist the plasmonic excitations. Furthermore, our studies establish that the plasmon of graphene could function as a delicate sensor for polarization textures. The evolution of polarization textures in t-BN under uniform electric fields is tomographically examined via plasmonic imaging. Strikingly, no noticeable polarization switching is observed under applied electric fields up to 0.23 V/nm, at variance with transport reports. Our nano-images unambiguously reveal that t-BN with triangular domains acts like a ferrielectric, rather than ferroelectric claimed by many previous studies.
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
-
Optical and X-ray Photo-emission Spectroscopies of Core/Shell Colloidal CdSe/CdS Quantum Dots: Modeling and Experimental Determination of Band Alignment
Authors:
Damien Simonot,
Céline Roux-Byl,
Xiangzhen Xu,
Willy Daney de Marcillac,
Corentin Dabard,
Mathieu G Silly,
Emmanuel Lhuillier,
Thomas Pons,
Simon Huppert,
Agnès Maître
Abstract:
Optical properties of multilayer semi-conductor nano-emitters are crucially dependent on the relative energy levelsof their different components. For core/shell quantum dots, the relative energy difference between conduction bandedge of core and shell materials induces, depending on its value, either a confinement of the electron within the coreor a delocalization of its wave function within the w…
▽ More
Optical properties of multilayer semi-conductor nano-emitters are crucially dependent on the relative energy levelsof their different components. For core/shell quantum dots, the relative energy difference between conduction bandedge of core and shell materials induces, depending on its value, either a confinement of the electron within the coreor a delocalization of its wave function within the whole quantum dot. This results in drastic consequences on theenergy and the oscillator strength of the fundamental transition. Surprisingly, the literature currently lacks a definitivevalue for the energy difference between CdSe and CdS conduction band edges as most of the experimental studiesprovide values corresponding to specific geometries of quantum dots. Here, we develop a full theoretical modelexpressing energy levels considering core/shell interface pressure, ligands and enabling the accurate prediction ofthe bandgap value with the nanocrystal size. It allows to reliably determine the energy difference between theconduction band edge of CdSe and CdS materials, known as the conduction band offset, in such a way that this valuecan later be used to model quantum dots of any geometry. This value is determined using our model and two differentexperimental methods: optical spectroscopy and X-ray photoemission (XPS) experiments.
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
-
A universal bioluminescence tomography system for pre-clinical image-guided radiotherapy research
Authors:
Zhishen Tong,
Zijian Deng,
Xiangkun Xu,
Ciara Newman,
Xun Jia,
Yuncheng Zhong,
Merle Reinhart,
Paul Tsouchlos,
Tim Devling,
Hamid Dehghani,
Iulian Iordachita,
Debabrata Saha,
John W. Wong,
Ken Kang-Hsin Wang
Abstract:
CBCT-guided small animal irradiators encounter challenges in localizing soft-tissue targets due to low imaging contrast. Bioluminescence tomography (BLT) offers a promising solution, but they have largely remained in laboratorial development, limiting accessibility for researchers. In this work, we develop a universal, commercial-graded BLT-guided system (MuriGlo) designed to seamlessly integrate…
▽ More
CBCT-guided small animal irradiators encounter challenges in localizing soft-tissue targets due to low imaging contrast. Bioluminescence tomography (BLT) offers a promising solution, but they have largely remained in laboratorial development, limiting accessibility for researchers. In this work, we develop a universal, commercial-graded BLT-guided system (MuriGlo) designed to seamlessly integrate with commercial irradiators and empower researchers for translational studies. We demonstrate its capabilities in supporting in vitro and in vivo studies. The MuriGlo comprises detachable mouse bed, thermostatic control, mirrors, filters, and CCD, enabling multi-projection and multi-spectral imaging. We evaluate that the thermostatic control effectively sustains animal temperature at 37°C throughout imaging, and quantify that the system can detect as few as 61 GL261-AkaLuc cells in vitro. To illustrate how the MuriGlo can be utilized for in vivo image-guided research, we present 3 strategies, BLT-guided 5-arc, 2-field box, and BLI-guided single-beam, ranging from complicated high-conformal to simplest high-throughput plans. The high conformal BLT-guided 5-arc plan fully covers the gross tumor volume (GTV) at prescribed dose with minimal normal tissue exposure (3.9%), while the simplified, high-throughput BLT-guided 2-field box achieves 100% GTV coverage but results in higher normal tissue exposure (13.1%). Moreover, we demonstrate that the localization accuracy of MuriGlo for both widely-used SARRP and SmART irradiators is within1 mm, and the tumor coverage reaches over 97% with 0.75mm margin. The universal BLT-guided system offers seamless integration with commercial irradiators, achieving comparable localization accuracy, expected to supporting high-precision radiation research.
△ Less
Submitted 27 June, 2024; v1 submitted 18 June, 2024;
originally announced June 2024.
-
Enabling Large-Scale and High-Precision Fluid Simulations on Near-Term Quantum Computers
Authors:
Zhao-Yun Chen,
Teng-Yang Ma,
Chuang-Chao Ye,
Liang Xu,
Ming-Yang Tan,
Xi-Ning Zhuang,
Xiao-Fan Xu,
Yun-Jie Wang,
Tai-Ping Sun,
Yong Chen,
Lei Du,
Liang-Liang Guo,
Hai-Feng Zhang,
Hao-Ran Tao,
Tian-Le Wang,
Xiao-Yan Yang,
Ze-An Zhao,
Peng Wang,
Sheng Zhang,
Chi Zhang,
Ren-Ze Zhao,
Zhi-Long Jia,
Wei-Cheng Kong,
Meng-Han Dou,
Jun-Chao Wang
, et al. (7 additional authors not shown)
Abstract:
Quantum computational fluid dynamics (QCFD) offers a promising alternative to classical computational fluid dynamics (CFD) by leveraging quantum algorithms for higher efficiency. This paper introduces a comprehensive QCFD method, including an iterative method "Iterative-QLS" that suppresses error in quantum linear solver, and a subspace method to scale the solution to a larger size. We implement o…
▽ More
Quantum computational fluid dynamics (QCFD) offers a promising alternative to classical computational fluid dynamics (CFD) by leveraging quantum algorithms for higher efficiency. This paper introduces a comprehensive QCFD method, including an iterative method "Iterative-QLS" that suppresses error in quantum linear solver, and a subspace method to scale the solution to a larger size. We implement our method on a superconducting quantum computer, demonstrating successful simulations of steady Poiseuille flow and unsteady acoustic wave propagation. The Poiseuille flow simulation achieved a relative error of less than $0.2\%$, and the unsteady acoustic wave simulation solved a 5043-dimensional matrix. We emphasize the utilization of the quantum-classical hybrid approach in applications of near-term quantum computers. By adapting to quantum hardware constraints and offering scalable solutions for large-scale CFD problems, our method paves the way for practical applications of near-term quantum computers in computational science.
△ Less
Submitted 19 June, 2024; v1 submitted 10 June, 2024;
originally announced June 2024.
-
Purely Quantum Nonreciprocity by Spatially Separated Transmission Scheme
Authors:
Zhi-Hao Liu,
Guang-Yu Zhang,
Xun-Wei Xu
Abstract:
Nonreciprocal photon blockade is of particular interest due to its potential applications in chiral quantum technologies and topological photonics. In the regular cases, nonreciprocal transmission (classical nonreciprocity) and nonreciprocal photon blockade (quantum nonreciprocity) often appear simultaneously. Nevertheless, how to achieve purely quantum nonreciprocity (no classical nonreciprocity)…
▽ More
Nonreciprocal photon blockade is of particular interest due to its potential applications in chiral quantum technologies and topological photonics. In the regular cases, nonreciprocal transmission (classical nonreciprocity) and nonreciprocal photon blockade (quantum nonreciprocity) often appear simultaneously. Nevertheless, how to achieve purely quantum nonreciprocity (no classical nonreciprocity) remains largely unexplored. Here, we propose a spatially separated transmission scheme, that the photons transport in different directions take different paths, in an optical system consisting of two spinning cavities coupled indirectly by two common drop-filter waveguides. Based on the spatially separated transmission scheme, we demonstrate a purely quantum nonreciprocity (nonreciprocal photon blockade) by considering the Kerr nonlinear interaction in one of the paths. Interestingly, we find that the nonreciprocal photon blockade is enhanced nonreciprocally, i.e., the nonreciprocal photon blockade is enhanced when the photons transport in one direction but suppressed in the reverse direction. We identify that the nonreciprocal enhancement of nonreciprocal photon blockade is induced by the destructive or constructive interference between two paths for two photons passing through the whole system. The spatially separated transmission scheme proposed in the work provides a novel approach to observe purely quantum nonreciprocal effects.
△ Less
Submitted 7 June, 2024;
originally announced June 2024.
-
Characterizing Biphoton Spatial Wave Function Dynamics with Quantum Wavefront Sensing
Authors:
Yi Zheng,
Zhao-Di Liu,
Rui-Heng Miao,
Jin-Ming Cui,
Mu Yang,
Xiao-Ye Xu,
Jin-Shi Xu,
Chuan-Feng Li,
Guang-Can Guo
Abstract:
With an extremely high dimensionality, the spatial degree of freedom of entangled photons is a key tool for quantum foundation and applied quantum techniques. To fully utilize the feature, the essential task is to experimentally characterize the multiphoton spatial wave function including the entangled amplitude and phase information at different evolutionary stages. However, there is no effective…
▽ More
With an extremely high dimensionality, the spatial degree of freedom of entangled photons is a key tool for quantum foundation and applied quantum techniques. To fully utilize the feature, the essential task is to experimentally characterize the multiphoton spatial wave function including the entangled amplitude and phase information at different evolutionary stages. However, there is no effective method to measure it. Quantum state tomography is costly, and quantum holography requires additional references. Here we introduce quantum Shack-Hartmann wavefront sensing to perform efficient and reference-free measurement of the biphoton spatial wave function. The joint probability distribution of photon pairs at the back focal plane of a microlens array is measured and used for amplitude extraction and phase reconstruction. In the experiment, we observe that the biphoton amplitude correlation becomes weak while phase correlation shows up during free-space propagation. Our work is a crucial step in quantum physical and adaptive optics and paves the way for characterizing quantum optical fields with high-order correlations or topological patterns.
△ Less
Submitted 16 July, 2024; v1 submitted 7 June, 2024;
originally announced June 2024.
-
A fully plasma based electron injector for a linear collider or XFEL
Authors:
Thamine N. Dalichaouch,
Xinlu L. Xu,
Fei Li,
Frank S. Tsung,
Warren B. Mori
Abstract:
We demonstrate through high-fidelity particle-in-cell simulations a simple approach for efficiently generating 20+ GeV electron beams with the necessary charge, energy spread, and emittance for use as the injector for an electron arm of a future linear collider or a next generation XFEL. The self-focusing of an unmatched, relatively low quality, drive beam results in self-injection by elongating t…
▽ More
We demonstrate through high-fidelity particle-in-cell simulations a simple approach for efficiently generating 20+ GeV electron beams with the necessary charge, energy spread, and emittance for use as the injector for an electron arm of a future linear collider or a next generation XFEL. The self-focusing of an unmatched, relatively low quality, drive beam results in self-injection by elongating the wakefield excited in the nonlinear blowout regime. Over pump depletion distances, the drive beam dynamics and self-loading from the injected beam leads to extremely high quality and high energy output beams. For plasma densities of $10^{18} \ \text{cm}^{-3}$, PIC simulation results indicate that self-injected beams with $0.52 \ \text{nC}$ of charge can be accelerated to $\sim 20$ GeV energies with projected energy spreads, $\lesssim 1\%$ within the beam core, slice normalized emittances as low as $110 \ \text{nm}$, a peak normalized brightness $\gtrsim 10^{19} \ \text{A}/\text{m}^2/\text{rad}^2$, and energy transfer efficiencies $\gtrsim 54\%$.
△ Less
Submitted 6 June, 2024;
originally announced June 2024.
-
Velocity Scanning Tomography for Room-Temperature Quantum Simulation
Authors:
Jiefei Wang,
Ruosong Mao,
Xingqi Xu,
Yunzhou Lu,
Jianhao Dai,
Xiao Liu,
Gang-Qin Liu,
Dawei Lu,
Huizhu Hu,
Shi-Yao Zhu,
Han Cai,
Da-Wei Wang
Abstract:
Quantum simulation offers an analog approach for exploring exotic quantum phenomena using controllable platforms, typically necessitating ultracold temperatures to maintain the quantum coherence. Superradiance lattices (SLs) have been harnessed to simulate coherent topological physics at room temperature, but the thermal motion of atoms remains a notable challenge in accurately measuring the physi…
▽ More
Quantum simulation offers an analog approach for exploring exotic quantum phenomena using controllable platforms, typically necessitating ultracold temperatures to maintain the quantum coherence. Superradiance lattices (SLs) have been harnessed to simulate coherent topological physics at room temperature, but the thermal motion of atoms remains a notable challenge in accurately measuring the physical quantities. To overcome this obstacle, we invent and validate a velocity scanning tomography technique to discern the responses of atoms with different velocities, allowing cold-atom spectroscopic resolution within room-temperature SLs. By comparing absorption spectra with and without atoms moving at specific velocities, we can derive the Wannier-Stark ladders of the SL across various effective static electric fields, their strengths being proportional to the atomic velocities. We extract the Zak phase of the SL by monitoring the ladder frequency shift as a function of the atomic velocity, effectively demonstrating the topological winding of the energy bands. Our research signifies the feasibility of room-temperature quantum simulation and facilitates their applications in quantum information processing.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Data quality control system and long-term performance monitor of the LHAASO-KM2A
Authors:
Zhen Cao,
F. Aharonian,
Axikegu,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
W. Bian,
A. V. Bukevich,
Q. Cao,
W. Y. Cao,
Zhe Cao,
J. Chang,
J. F. Chang,
A. M. Chen,
E. S. Chen,
H. X. Chen,
Liang Chen,
Lin Chen,
Long Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. Chen
, et al. (263 additional authors not shown)
Abstract:
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To…
▽ More
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively.
△ Less
Submitted 13 June, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Exciton polariton critical non-Hermitian skin effect with spin-momentum-locked gains
Authors:
Xingran Xu,
Lingyu Tian,
Zhiyuan An,
Qihua Xiong,
Sanjib Ghosh
Abstract:
The critical skin effect, an intriguing phenomenon in non-Hermitian systems, displays sensitivity to system size and manifests distinct dynamical behaviors. In this work, we propose a novel scheme to achieve the critical non-Hermitian skin effect of exciton polaritons in an elongated microcavity system. We show that by utilising longitudinal-transverse spin splitting and spin-momentum-locked gain,…
▽ More
The critical skin effect, an intriguing phenomenon in non-Hermitian systems, displays sensitivity to system size and manifests distinct dynamical behaviors. In this work, we propose a novel scheme to achieve the critical non-Hermitian skin effect of exciton polaritons in an elongated microcavity system. We show that by utilising longitudinal-transverse spin splitting and spin-momentum-locked gain, a critical non-Hermitian skin effect can be achieved in a continuous system without the need of an underlying lattice. We find that a phase transition can be induced by changing the cavity detuning with respect to the exciton energy. We identify a measurable order parameter associated with this phase transition and demonstrate the corresponding critical behavior. Our work offers a flexible approach to manipulate non-Hermitian phases of exciton polaritons, thereby expanding the potential applications of polaritonic devices.
△ Less
Submitted 19 May, 2024;
originally announced May 2024.
-
Challenging theories of dark energy with levitated force sensor
Authors:
Peiran Yin,
Rui Li,
Chengjiang Yin,
Xiangyu Xu,
Xiang Bian,
Han Xie,
Chang-Kui Duan,
Pu Huang,
Jian-hua He,
Jiangfeng Du
Abstract:
The nature of dark energy is one of the most outstanding problems in physical science, and various theories have been proposed. It is therefore essential to directly verify or rule out these theories experimentally. However, despite substantial efforts in astrophysical observations and laboratory experiments, previous tests have not yet acquired enough accuracy to provide decisive conclusions as t…
▽ More
The nature of dark energy is one of the most outstanding problems in physical science, and various theories have been proposed. It is therefore essential to directly verify or rule out these theories experimentally. However, despite substantial efforts in astrophysical observations and laboratory experiments, previous tests have not yet acquired enough accuracy to provide decisive conclusions as to the validity of these theories. Here, using a diamagnetically levitated force sensor, we carry out a test on one of the most compelling explanations for dark energy to date, namely the Chameleon theory, an ultra-light scalar field with screening mechanisms, which couples to normal-matter fields and leaves a detectable fifth force. Our results extend previous results by nearly two orders of magnitude to the entire physical plausible parameter space of cosmologically viable chameleon models. We find no evidence for such a fifth force. Our results decisively rule out the basic chameleon model as a candidate for dark energy. Our work, thus, demonstrates the robustness of laboratory experiments in unveiling the nature of dark energy in the future. The methodology developed here can be further applied to study a broad range of fundamental physics.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
Canonized then Minimized RMSD for Three-Dimensional Structures
Authors:
Jie Li,
Qian Chen,
Jingwei Weng,
Jianming Wu,
Xin Xu
Abstract:
Existing molecular canonization algorithms typically operate on one-dimensional (1D) string representations or two-dimensional (2D) connectivity graphs of a molecule and are not able to differentiate equivalent atoms based on three-dimensional (3D) structures. The stereochemical tags on each atom are in fact determined according to established Cahn-Ingold-Prelog (CIP) rules for comparing grades, w…
▽ More
Existing molecular canonization algorithms typically operate on one-dimensional (1D) string representations or two-dimensional (2D) connectivity graphs of a molecule and are not able to differentiate equivalent atoms based on three-dimensional (3D) structures. The stereochemical tags on each atom are in fact determined according to established Cahn-Ingold-Prelog (CIP) rules for comparing grades, which can help to further differentiate atoms with similar environment. Therefore, a stereochemical-rule-based canonization algorithm that is capable of assigning canonical indices using 3D structural information is of great value. On top of the Schneider-Sayle-Landrum (SSL) partition-based canonization algorithm, we propose an enhanced canonization algorithm to expand its applicability. The initial index assignment rules are redesigned, so that the obtained canonical indices are compatible with the most of the common CIP Sequence Rules, which greatly eases the stereochemical assignment. Furthermore, a branching tiebreaking step is added to secure an accurate evaluation of the structural difference through the minimized root-mean-square deviation (RMSD) between structures, with an option to include hydrogen atoms or not. Our algorithm is implemented with Python and can efficiently obtain minimized RMSD taking into account of the symmetry of molecular systems , contributing to the fields of drug design, molecular docking, and data analysis of molecular dynamics simulation.
△ Less
Submitted 1 May, 2024;
originally announced May 2024.
-
Ultrafast Photocurrent Hysteresis in Photoferroelectric α-In2Se3
Authors:
Zhen Lei,
Jiawei Chang,
Qiyi Zhao,
Jian Zhou,
Yuanyuan Huang,
Qihua Xiong,
Xinlong Xu
Abstract:
The photon-electron interactions are generally volatile and the intricate multiphysics details of photoexcited carrier dynamics are not yet distinguished. How to nonvolatile control the physical state through all-optical means and clarify the intricate physical processes has been a long-term goal pursued in polar materials. Photoferroelectric α-In2Se3 holds the great potential for capturing multim…
▽ More
The photon-electron interactions are generally volatile and the intricate multiphysics details of photoexcited carrier dynamics are not yet distinguished. How to nonvolatile control the physical state through all-optical means and clarify the intricate physical processes has been a long-term goal pursued in polar materials. Photoferroelectric α-In2Se3 holds the great potential for capturing multimodal nonvolatile states due to the spontaneous reversible in-plane and out-of-plane polarizations and its tunable light-matter interactions arising from the electronic degree of freedom. Here we uncover a nonvolatile zero-bias ultrafast photocurrent hysteresis response with an all-optical scheme, diagnosed by in-plane and out-of-plane terahertz waves emitted from the photoferroelectric α-In2Se3. The mechanism of such ultrafast photocurrent hysteresis emerges as a result of anomalous bulk linear and circular photovoltaic effect synchronously driven by local polarization rearrangement. Utilizing anisotropic ferroelectric kinetics-induced relative phase between the in-plane and out-of-plane directions, we further show flexibly selective chirality, tunable rotational angle, and optimizable ellipticity of terahertz wave polarizations. Our finding offers a promising avenue towards direct ultrafast nonvolatile processing of photocurrent signals through an all-optical scheme.
△ Less
Submitted 30 April, 2024;
originally announced May 2024.
-
Acceptance Tests of more than 10 000 Photomultiplier Tubes for the multi-PMT Digital Optical Modules of the IceCube Upgrade
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
L. Ausborm,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
S. Bash,
V. Basu,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
J. Beise,
C. Bellenghi
, et al. (399 additional authors not shown)
Abstract:
More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities…
▽ More
More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities can easily be adapted to other PMTs, such that they can, e.g., be re-used for testing the PMTs for IceCube-Gen2. Single photoelectron response, high voltage dependence, time resolution, prepulse, late pulse, afterpulse probabilities, and dark rates were measured for each PMT. We describe the design of the testing facilities, the testing procedures, and the results of the acceptance tests.
△ Less
Submitted 20 June, 2024; v1 submitted 30 April, 2024;
originally announced April 2024.
-
Dynamical Blockade Optimizing via Particle Swarm Optimization Algorithm
Authors:
Guang-Yu Zhang,
Zhi-Hao Liu,
Xun-Wei Xu
Abstract:
Photon blockade in weak nonlinear regime is an exciting and promising subject that has been extensively studied in the steady state. However, how to achieve dynamic blockade in a single bosonic mode with weak nonlinearity using only pulsed driving field remains unexplored. Here, we propose to optimize the parameters of the pulsed driving field to achieve dynamic blockade in a single bosonic mode w…
▽ More
Photon blockade in weak nonlinear regime is an exciting and promising subject that has been extensively studied in the steady state. However, how to achieve dynamic blockade in a single bosonic mode with weak nonlinearity using only pulsed driving field remains unexplored. Here, we propose to optimize the parameters of the pulsed driving field to achieve dynamic blockade in a single bosonic mode with weak nonlinearity via the particle swarm optimization (PSO) algorithm. We demonstrate that both Gaussian and rectangular pulses can be used to generate dynamic photon blockade in a single bosonic mode with weak nonlinearity. Based on the Fourier series expansions of the pulsed driving field, we identify that there are many paths for two-photon excitation in the bosonic mode, even only driven by pulsed field, and the dynamic blockade in weak nonlinear regime is induced by the destructive interference between them. Our work not only highlights the effectiveness of PSO algorithm in optimizing dynamical blockade, but also opens a way to optimize the parameters for other quantum effects, such as quantum entanglement and quantum squeezing.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
Amino Acids Stabilizing Effect on Protein and Colloidal Dispersions
Authors:
Ting Mao,
Xufeng Xu,
Pamina M. Winkler,
Cécilia Siri,
Ekaterina Poliukhina,
Paulo Jacob Silva,
Zhi Luo,
Quy Ong,
Alfredo-Alexander Katz,
Francesco Stellacci
Abstract:
Despite being used for decades as stabilizers, amino acids (AAs) remain mysterious components of many medical and biological formulations. Hypotheses on their role vary ranging from hydrotropic to protein-specific effects (stabilization against misfolding). Here, we deduce that AAs possess a new and broad colloidal property by finding that stabilizing effect of the AAs is comparable on dispersion…
▽ More
Despite being used for decades as stabilizers, amino acids (AAs) remain mysterious components of many medical and biological formulations. Hypotheses on their role vary ranging from hydrotropic to protein-specific effects (stabilization against misfolding). Here, we deduce that AAs possess a new and broad colloidal property by finding that stabilizing effect of the AAs is comparable on dispersion of various proteins, plasmid DNA, and non-biological nanoparticles. The interactions among colloidal particles in dispersion are carefully evaluated by the second osmotic virial coefficient (B_22) and the potential of mean force. We propose a theoretical framework that explains the stabilization as the effect of weakly interacting small molecules with patchy nanoscale colloids. We validate it through quantitative comparison with experimental data by comparing equilibrium dissociation constants for AA/proteins obtained either by fitting the B22 data with this theory or experimentally. We find excellent quantitative agreement (e.g. proline/lysozyme 1.18 and 2.28 M, respectively) and indeed that the interactions are very weak. The theory presented implies that (i) charged AAs will be effective only for proteins of opposite charge; (ii) short peptides composed of n AAs will be as or more effective than n separate AAs; (iii) any small molecule weakly interacting with nanoscale colloids that increases the solvation of the surface will have a stabilizing effect. The experimental evidences corroborate all three predictions. Much like the ionic strength of the solution is commonly reported, our results imply that the same should be done for the small molecules, as they also affect fundamentally colloidal properties. As an example, we show that AAs vary the cloud point of a lysozyme solution by as much as 4 K.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Fuxi-DA: A Generalized Deep Learning Data Assimilation Framework for Assimilating Satellite Observations
Authors:
Xiaoze Xu,
Xiuyu Sun,
Wei Han,
Xiaohui Zhong,
Lei Chen,
Hao Li
Abstract:
Data assimilation (DA), as an indispensable component within contemporary Numerical Weather Prediction (NWP) systems, plays a crucial role in generating the analysis that significantly impacts forecast performance. Nevertheless, the development of an efficient DA system poses significant challenges, particularly in establishing intricate relationships between the background data and the vast amoun…
▽ More
Data assimilation (DA), as an indispensable component within contemporary Numerical Weather Prediction (NWP) systems, plays a crucial role in generating the analysis that significantly impacts forecast performance. Nevertheless, the development of an efficient DA system poses significant challenges, particularly in establishing intricate relationships between the background data and the vast amount of multi-source observation data within limited time windows in operational settings. To address these challenges, researchers design complex pre-processing methods for each observation type, leveraging approximate modeling and the power of super-computing clusters to expedite solutions. The emergence of deep learning (DL) models has been a game-changer, offering unified multi-modal modeling, enhanced nonlinear representation capabilities, and superior parallelization. These advantages have spurred efforts to integrate DL models into various domains of weather modeling. Remarkably, DL models have shown promise in matching, even surpassing, the forecast accuracy of leading operational NWP models worldwide. This success motivates the exploration of DL-based DA frameworks tailored for weather forecasting models. In this study, we introduces FuxiDA, a generalized DL-based DA framework for assimilating satellite observations. By assimilating data from Advanced Geosynchronous Radiation Imager (AGRI) aboard Fengyun-4B, FuXi-DA consistently mitigates analysis errors and significantly improves forecast performance. Furthermore, through a series of single-observation experiments, Fuxi-DA has been validated against established atmospheric physics, demonstrating its consistency and reliability.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
Theoretical and Global Simulation Analysis of Collisional Microtearing
Authors:
Kaixuan Fan,
Xue-Qiao Xu,
Ben Zhu,
Chao Dong,
Tianyang Xia,
Zeyu Li
Abstract:
This study delves into Microtearing Modes (MTMs) in tokamak plasmas, employing advanced simulations within the BOUT++ framework. The research, centering on collisional MTMs influenced by the time-dependent thermal force, enhances our understanding of plasma dynamics. It achieves this through the simplification and linearization of control equations in detailed linear simulations. The study meticul…
▽ More
This study delves into Microtearing Modes (MTMs) in tokamak plasmas, employing advanced simulations within the BOUT++ framework. The research, centering on collisional MTMs influenced by the time-dependent thermal force, enhances our understanding of plasma dynamics. It achieves this through the simplification and linearization of control equations in detailed linear simulations. The study meticulously evaluates various conductivity models, including those proposed by Larakers, Drake, and Hassam, under diverse plasma conditions and collision regimes. A notable achievement of this research is the derivation of a unified dispersion relation that encompasses both MTM and Drift-Alfven Wave (DAW) instabilities. It interestingly reveals that DAW and MTM exhibit instability at different proximities to the rational surface. Specifically, MTMs become unstable near the rational surface but stabilize farther away, whereas the drift-Alfven instability manifests away from the rational surface. Further, the study re-derives MTM dispersion relations based on Ohm's law and the vorticity equation, providing a thorough analysis of electromagnetic and electrostatic interactions in tokamaks. Global simulations demonstrate an inverse correlation between MTM growth rates and collisionality, and a direct correlation with temperature gradients. The nonalignment of the rational surface with the peak of electron local diamagnetic frequency stabilizes the MTMs. Nonlinear simulations highlight electron temperature relaxation as the primary saturation mechanism for MTMs, with magnetic flutter identified as the dominant mode of electron thermal transport.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
Propensity of water self-ions at air(oil)-water interfaces revealed by deep potential molecular dynamics with enhanced sampling
Authors:
Pengchao Zhang,
Xuefei Xu
Abstract:
The preference of water self-ions (hydronium and hydroxide) near air/oil-water interfaces is one of the hottest topics in water research due to its importance for understanding properties, phenomena, and reactions of interfaces. In this work, we performed enhanced-sampling molecular dynamics based on state-of-the-art neural network potentials with M06-2X accuracy to investigate the propensity of h…
▽ More
The preference of water self-ions (hydronium and hydroxide) near air/oil-water interfaces is one of the hottest topics in water research due to its importance for understanding properties, phenomena, and reactions of interfaces. In this work, we performed enhanced-sampling molecular dynamics based on state-of-the-art neural network potentials with M06-2X accuracy to investigate the propensity of hydronium and hydroxide ions at air/oil-water interfaces, which can simultaneously describe well the water autoionization process forming these ions, recombination of ions, and ionic distribution along the normal distance to the interface by employing a set of appropriate Voronoi collective variables. The results support a stable ionic double-layer distribution near the interface for both air-water and oil-water interface systems. Hydronium tends to reside in the topmost layer of the interface, while hydroxide with a slightly stronger interfacial stabilization free energy is enriched in the deeper interfacial layer. This double-layer distribution may help to understand the longstanding controversy about the interfacial acid-base nature.
△ Less
Submitted 7 July, 2024; v1 submitted 10 April, 2024;
originally announced April 2024.
-
Multi-interface engineering to realize all-solution processed highly efficient Kesterite solar cells
Authors:
Licheng Lou,
Kang Yin,
Jinlin Wang,
Yuan Li,
Xiao Xu,
Bowen Zhang,
Menghan Jiao,
Shudan Chen,
Tan Guo,
Jiangjian Shi,
Huijue Wu,
Yanhong Luo,
Dongmei Li,
Qingbo Meng
Abstract:
With the rapid development of Kesterite Cu2ZnSn(S, Se)4 solar cells in the past few years, how to achieve higher cost-performance ratio has become an important topic in the future development and industrialization of this technology. Herein, we demonstrate an all-solution route for the cell fabrication, in particular targeting at the solution processed window layer comprised of ZnO nanoparticles/A…
▽ More
With the rapid development of Kesterite Cu2ZnSn(S, Se)4 solar cells in the past few years, how to achieve higher cost-performance ratio has become an important topic in the future development and industrialization of this technology. Herein, we demonstrate an all-solution route for the cell fabrication, in particular targeting at the solution processed window layer comprised of ZnO nanoparticles/Ag nanowires. A multi-interface engineering strategy assisted by organic polymers and molecules is explored to synergistically improve the film deposition, passivate the surface defects and facilitate the charge transfer. These efforts help us achieve high-performance and robust Kesterite solar cells at extremely low time and energy costs, with efficiency records of 14.37% and 13.12% being realized in rigid and flexible Kesterite solar cells, respectively. Our strategy here is also promising to be transplanted into other solar cells with similar geometric and energy band structures, helping reduce production costs and shorten the production cycle (i.e. increasing production capacity) of these photovoltaic industries.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
Vacancy enhanced cation ordering enables >15% efficiency in Kesterite solar cells
Authors:
Jinlin Wang,
Licheng Lou,
Kang Yin,
Fanqi Meng,
Xiao Xu,
Menghan Jiao,
Bowen Zhang,
Jiangjian Shi,
Huijue Wu,
Yanhong Luo,
Dongmei Li,
Qingbo Meng
Abstract:
Atomic disorder, a widespread problem in compound crystalline materials, is a imperative affecting the performance of multi-chalcogenide Cu2ZnSn(S, Se)4 (CZTSSe) photovoltaic device known for its low cost and environmental friendliness. Cu-Zn disorder is particularly abundantly present in CZTSSe due to its extraordinarily low formation energy, having induced high-concentration deep defects and sev…
▽ More
Atomic disorder, a widespread problem in compound crystalline materials, is a imperative affecting the performance of multi-chalcogenide Cu2ZnSn(S, Se)4 (CZTSSe) photovoltaic device known for its low cost and environmental friendliness. Cu-Zn disorder is particularly abundantly present in CZTSSe due to its extraordinarily low formation energy, having induced high-concentration deep defects and severe charge loss, while its regulation remains challenging due to the contradiction between disorder-order phase transition thermodynamics and atom-interchange kinetics. Herein, through introducing more vacancies in the CZTSSe surface, we explored a vacancy-assisted strategy to reduce the atom-interchange barrier limit to facilitate the Cu-Zn ordering kinetic process. The improvement in the Cu-Zn order degree has significantly reduced the charge loss in the device and helped us realize 15.4% (certified at 14.9%) and 13.5% efficiency (certified at 13.3%) in 0.27 cm2 and 1.1 cm2-area CZTSSe solar cells, respectively, thus bringing substantial advancement for emerging inorganic thin-film photovoltaics.
△ Less
Submitted 8 April, 2024;
originally announced April 2024.
-
Continuously tunable uniaxial strain control of van der Waals heterostructure devices
Authors:
Zhaoyu Liu,
Xuetao Ma,
John Cenker,
Jiaqi Cai,
Zaiyao Fei,
Paul Malinowski,
Joshua Mutch,
Yuzhou Zhao,
Kyle Hwangbo,
Zhong Lin,
Arnab Manna,
Jihui Yang,
David Cobden,
Xiaodong Xu,
Matthew Yankowitz,
Jiun-Haw Chu
Abstract:
Uniaxial strain has been widely used as a powerful tool for investigating and controlling the properties of quantum materials. However, existing strain techniques have so far mostly been limited to use with bulk crystals. Although recent progress has been made in extending the application of strain to two-dimensional van der Waals (vdW) heterostructures, these techniques have been limited to optic…
▽ More
Uniaxial strain has been widely used as a powerful tool for investigating and controlling the properties of quantum materials. However, existing strain techniques have so far mostly been limited to use with bulk crystals. Although recent progress has been made in extending the application of strain to two-dimensional van der Waals (vdW) heterostructures, these techniques have been limited to optical characterization and extremely simple electrical device geometries. Here, we report a piezoelectric-based \textit{in situ} uniaxial strain technique enabling simultaneous electrical transport and optical spectroscopy characterization of dual-gated vdW heterostructure devices. Critically, our technique remains compatible with vdW heterostructure devices of arbitrary complexity fabricated on conventional silicon/silicon dioxide wafer substrates. We demonstrate a large and continuously tunable strain of up to $-0.15\%$ at millikelvin temperatures, with larger strain values also likely achievable. We quantify the strain transmission from the silicon wafer to the vdW heterostructure, and further demonstrate the ability of strain to modify the electronic properties of twisted bilayer graphene. Our technique provides a highly versatile new method for exploring the effect of uniaxial strain on both the electrical and optical properties of vdW heterostructures, and can be easily extended to include additional characterization techniques.
△ Less
Submitted 23 May, 2024; v1 submitted 1 April, 2024;
originally announced April 2024.
-
Gradient bandgap enables >13% efficiency sulfide Kesterite solar cells with open-circuit voltage over 800 mV
Authors:
Kang Yin,
Jinlin Wang,
Licheng Lou,
Xiao Xu,
Bowen Zhang,
Menghan Jiao,
Jiangjian Shi,
Dongmei Li,
Huijue Wu,
Yanhong Luo,
Qingbo Meng
Abstract:
Sulfide Kesterite Cu2ZnSnS4 (CZTS), a nontoxic and low-cost photovoltaic material, has always being facing severe charge recombination and poor carrier transport, resulting in the cell efficiency record stagnating around 11% for years. Gradient bandgap is a promising approach to relieve these issues, however, has not been effectively realized in Kesterite solar cells due to the challenges in contr…
▽ More
Sulfide Kesterite Cu2ZnSnS4 (CZTS), a nontoxic and low-cost photovoltaic material, has always being facing severe charge recombination and poor carrier transport, resulting in the cell efficiency record stagnating around 11% for years. Gradient bandgap is a promising approach to relieve these issues, however, has not been effectively realized in Kesterite solar cells due to the challenges in controlling the gradient distribution of alloying elements at high temperatures. Herein, targeting at the Cd alloyed CZTS, we propose a pre-crystallization strategy to reduce the intense vertical mass transport and Cd rapid diffusion in the film growth process, thereby realizing front Cd-gradient CZTS absorber. The Cd-gradient CZTS absorber, exhibiting downward bending conduction band structure, has significantly enhanced the minority carrier transport and additionally improved band alignment and interface property of CZTS/CdS heterojunction. Ultimately, we have achieved a champion total-area efficiency of 13.5% (active-area efficiency: 14.1%) in the cell and in particular a high open-circuit voltage of >800 mV. We have also achieved a certified total-area cell efficiency of 13.16%, realizing a substantial step forward for the pure sulfide Kesterite solar cell.
△ Less
Submitted 30 March, 2024;
originally announced April 2024.
-
Scaling Enhancement of Photon Blockade in Output Fields
Authors:
Zhi-Hao Liu,
Xun-Wei Xu
Abstract:
Photon blockade enhancement is an exciting and promising subject that has been well studied for photons in cavities. However, whether photon blockade can be enhanced in the output fields remains largely unexplored. We show that photon blockade can be greatly enhanced in the mixing output field of a nonlinear cavity and an auxiliary (linear) cavity, where no direct coupling between the nonlinear an…
▽ More
Photon blockade enhancement is an exciting and promising subject that has been well studied for photons in cavities. However, whether photon blockade can be enhanced in the output fields remains largely unexplored. We show that photon blockade can be greatly enhanced in the mixing output field of a nonlinear cavity and an auxiliary (linear) cavity, where no direct coupling between the nonlinear and auxiliary cavities is needed. We uncover a biquadratic scaling relation between the second-order correlation of the photons in the output field and intracavity nonlinear interaction strength, in contrast to a quadratic scaling relation for the photons in a nonlinear cavity. We identify that this scaling enhancement of photon blockade in the output field is induced by the destructive interference between two of the paths for two photons passing through the two cavities. We then extend the theory to the experimentally feasible Jaynes-Cummings model consisting of a two-level system strongly coupled to one of the two uncoupled cavities, and also predict a biquadratic scaling law in the mixing output field. Our proposed scheme is universal and can be extended to enhance blockade in other bosonic systems.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Amino Acids and Their Biological Derivatives Modulate Protein-Protein Interactions In an Additive Way
Authors:
Xufeng Xu,
Francesco Stellacci
Abstract:
Protein-protein interactions (PPI) differ when measured in test tubes and cells due to the complexity of the intracellular environment. Free amino acids (AAs) and their derivatives constitute a significant fraction of the intracellular volume and mass. Recently, we have found that AAs have a general property of rendering protein dispersions more stable by reducing the net attractive part of PPI. H…
▽ More
Protein-protein interactions (PPI) differ when measured in test tubes and cells due to the complexity of the intracellular environment. Free amino acids (AAs) and their derivatives constitute a significant fraction of the intracellular volume and mass. Recently, we have found that AAs have a general property of rendering protein dispersions more stable by reducing the net attractive part of PPI. Here, we study the effects on PPI of different AA derivatives, AA mixtures, and short peptides. We find that all the tested AA derivatives modulate PPI in solution as well as AAs. Furthermore, we show that the modulation effect is additive when AAs form mixtures or are bound into short peptides. Therefore, this study demonstrates the universal effect of a class of small molecules (i.e. AAs and their biological derivatives) on the modulation of PPI and provides insights into rationally designing biocompatible molecules for stabilizing protein interactions and consequently tuning protein functions.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Multi-photon super-linear image scanning microscopy using upconversion nanoparticles
Authors:
Yao Wang,
Baolei Liu,
Lei Ding,
Chaohao Chen,
Xuchen Shan,
Dajing Wang,
Menghan Tian,
Jiaqi Song,
Ze Zheng,
Xiaoxue Xu,
Xiaolan Zhong,
Fan Wang
Abstract:
Super-resolution fluorescence microscopy is of great interest in life science studies for visualizing subcellular structures at the nanometer scale. Among various kinds of super-resolution approaches, image scanning microscopy (ISM) offers a doubled resolution enhancement in a simple and straightforward manner, based on the commonly used confocal microscopes. ISM is also suitable to be integrated…
▽ More
Super-resolution fluorescence microscopy is of great interest in life science studies for visualizing subcellular structures at the nanometer scale. Among various kinds of super-resolution approaches, image scanning microscopy (ISM) offers a doubled resolution enhancement in a simple and straightforward manner, based on the commonly used confocal microscopes. ISM is also suitable to be integrated with multi-photon microscopy techniques, such as two-photon excitation and second-harmonic generation imaging, for deep tissue imaging, but it remains the twofold limited resolution enhancement and requires expensive femtosecond lasers. Here, we present and experimentally demonstrate the super-linear ISM (SL-ISM) to push the resolution enhancement beyond the factor of two, with a single low-power, continuous-wave, and near-infrared laser, by harnessing the emission nonlinearity within the multiphoton excitation process of lanthanide-doped upconversion nanoparticles (UCNPs). Based on a modified confocal microscope, we achieve a resolution of about 120 nm, 1/8th of the excitation wavelength. Furthermore, we demonstrate a parallel detection strategy of SL-ISM with the multifocal structured excitation pattern, to speed up the acquisition frame rate. This method suggests a new perspective for super-resolution imaging or sensing, multi-photon imaging, and deep-tissue imaging with simple, low-cost, and straightforward implementations.
△ Less
Submitted 20 March, 2024;
originally announced March 2024.
-
Versatile Capillary Cells for Handling Concentrated Samples in Analytical Ultracentrifugation
Authors:
Quy Ong,
Xufeng Xu,
Francesco Stellacci
Abstract:
In concentrated macromolecular dispersions, far-from-ideal intermolecular interactions determine the dispersion behaviors including phase transition, crystallization, and liquid-liquid phase separation. Here, we present a novel versatile capillary-cell design for analytical ultracentrifugation-sedimentation equilibrium (AUC-SE), ideal for studying samples at high concentrations. Current setups for…
▽ More
In concentrated macromolecular dispersions, far-from-ideal intermolecular interactions determine the dispersion behaviors including phase transition, crystallization, and liquid-liquid phase separation. Here, we present a novel versatile capillary-cell design for analytical ultracentrifugation-sedimentation equilibrium (AUC-SE), ideal for studying samples at high concentrations. Current setups for such studies are difficult and unreliable to handle, leading to a low experimental success rate. The design presented here is easy to use, robust, and reusable for samples in both aqueous and organic solvents while requiring no special tools or chemical modification of AUC cells. The key and unique feature is the fabrication of liquid reservoirs directly on the bottom window of AUC cells, which can be easily realized by laser ablation or mechanical drilling. The channel length and optical path length are therefore tunable. The success rate for assembling this new cell is close to 100%. We demonstrate the practicality of this cell by studying: 1) the equation of state and second virial coefficients of concentrated gold nanoparticle dispersions in water and bovine serum albumin (BSA) as well as lysozyme solution in aqueous buffers, 2) the gelation phase transition of DNA and BSA solutions, and 3) liquid-liquid phase separation of concentrated BSA/polyethylene glycol (PEG) droplets.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Dual-polarization RF Channelizer Based on Kerr Soliton Microcomb Sources
Authors:
Xingyuan Xu,
David J. Moss
Abstract:
We report a dual-polarization radio frequency (RF) channelizer based on microcombs. With the tailored mismatch between the FSRs of the active and passive MRRs, wideband RF spectra can be channelized into multiple segments featuring digital compatible bandwidths via the Vernier effect. Due to the use of dual polarization states, the number of channelized spectral segments, and thus the RF instantan…
▽ More
We report a dual-polarization radio frequency (RF) channelizer based on microcombs. With the tailored mismatch between the FSRs of the active and passive MRRs, wideband RF spectra can be channelized into multiple segments featuring digital compatible bandwidths via the Vernier effect. Due to the use of dual polarization states, the number of channelized spectral segments, and thus the RF instantaneous bandwidth (with a certain spectral resolution), can be doubled. In our experiments, we used 20 microcomb lines with 49 GHz FSR to achieve 20 channels for each polarization, with high RF spectra slicing resolutions at 144 MHz (TE) and 163 MHz (TM), respectively; achieving an instantaneous RF operation bandwidth of 3.1 GHz (TE) and 2.2 GHz (TM). Our approach paves the path towards monolithically integrated photonic RF receivers (the key components active and passive MRRs are all fabricated on the same platform) with reduced complexity, size, and unprecedented performance, which is important for wide RF applications with digital compatible signal detection.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Improved modeling of in-ice particle showers for IceCube event reconstruction
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
L. Ausborm,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
S. Bash,
V. Basu,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
J. Beise
, et al. (394 additional authors not shown)
Abstract:
The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstr…
▽ More
The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstruction that better captures our current knowledge of ice optical properties. When evaluated on a Monte Carlo simulation set, the median angular resolution for in-ice particle showers improves by over a factor of three compared to a reconstruction based on a simplified model of the ice. The most substantial improvement is obtained when including effects of birefringence due to the polycrystalline structure of the ice. When evaluated on data classified as particle showers in the high-energy starting events sample, a significantly improved description of the events is observed.
△ Less
Submitted 22 April, 2024; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Hydrogen bonding in water under extreme confinement unveiled by nanoscale vibrational spectroscopy and simulations
Authors:
Xintong Xu,
Xin Jin,
Matthias Kuehne,
De-Liang Bao,
Joel Martis,
Yu-Ming Tu,
Cody L. Ritt,
Juan Carlos Idrobo,
Michael S. Strano,
Arun Majumdar,
Sokrates T. Pantelides,
Jordan A. Hachtel
Abstract:
Fluids under extreme confinement exhibit distinctly new properties compared to their bulk analogs. Understanding the structure and intermolecular bonding of confined water lays the foundation for creating and improving applications at the water-energy nexus. However, probing confined water experimentally at the length scale of intermolecular and surface forces has remained a challenge. Here, we re…
▽ More
Fluids under extreme confinement exhibit distinctly new properties compared to their bulk analogs. Understanding the structure and intermolecular bonding of confined water lays the foundation for creating and improving applications at the water-energy nexus. However, probing confined water experimentally at the length scale of intermolecular and surface forces has remained a challenge. Here, we report a combined experiment/theory framework to reveal changes in H-bonding environment and the underlying molecular structure of confined water inside individual carbon nanotubes. H-bonding is directly probed through the O-H stretch frequency with vibrational electron energy-loss spectroscopy and compared to spectra from molecular-dynamics simulations based on density-functional-theory. Experimental spectra show that water in larger carbon nanotubes exhibit the bonded O-H vibrations of bulk water, but at smaller diameters, the frequency blueshifts to near the 'free' O-H stretch found in water vapor and hydrophobic surfaces. The matching simulations reveal that, in addition to steric confinement, the tube's vibrations play a key role in breaking up the H-bond network, resulting in an orientationally-dispersed, non-H-bonded phase. Furthermore, the temperature-dependence of the vibrations is investigated, providing insights into phase transitions and the confined-water density. This research demonstrates the potential of the experiment/theory framework to explore unprecedented aspects of structure and bonding in confined fluids.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Automatic treatment planning for radiotherapy: a cross-modality and protocol study
Authors:
Gregory Szalkowski,
Xuanang Xu,
Shiva Das,
Pew-Thian Yap,
Jun Lian
Abstract:
This study investigates the applicability of 3D dose predictions from a model trained on one modality to a cross-modality automated planning workflow. Additionally, we explore the impact of integrating a multi-criteria optimizer on adapting predictions to different clinical preferences. Using a previously created three-stage UNet in-house model trained on the 2020 AAPM OpenKBP challenge dataset (3…
▽ More
This study investigates the applicability of 3D dose predictions from a model trained on one modality to a cross-modality automated planning workflow. Additionally, we explore the impact of integrating a multi-criteria optimizer on adapting predictions to different clinical preferences. Using a previously created three-stage UNet in-house model trained on the 2020 AAPM OpenKBP challenge dataset (340 head and neck plans, planned using 9-field static IMRT), we retrospectively generated dose predictions for 20 patients. These dose predictions were used to generate deliverable IMRT, VMAT, and Tomotherapy plans using the fallback plan functionality in Raystation. The deliverable plans were evaluated against the dose predictions based on primary clinical goals. A new set of plans was also generated using MCO-based optimization with predicted dose values as constraints. The mimicking approach accurately replicated the predicted dose distributions across different modalities, with slight deviations in spinal cord and external contour maximum doses. MCO customization significantly reduced doses to OARs prioritized by our institution while maintaining target coverage. All tested plans met clinical deliverability standards, evidenced by a delivery QA gamma analysis passing rate above 98%. Our findings show that a model trained only on IMRT plans can contribute to planning across various modalities. Additionally, integrating predictions as constraints in an MCO-based workflow, rather than direct dose mimicking, enables a flexible, warm-start approach for treatment planning. Together, these approaches have the potential to significantly decrease plan turnaround time and quality variance, both at high resource medical centers that can train in-house models, and smaller centers that can adapt a model from another institution with minimal effort.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
Ultra-short lifetime isomer studies from photonuclear reactions using laser-driven ultra-intense γ-ray
Authors:
Di Wu,
Haoyang Lan,
Jiaxing Liu,
Huangang Lu,
Jianyao Zhang,
Jianfeng Lv,
Xuezhi Wu,
Hui Zhang,
Yadong Xia,
Qiangyou He,
Jie Cai,
Qianyi Ma,
Yuhui Xia,
Zhenan Wang,
Meizhi Wang,
Zhiyan Yang,
Xinlu Xu,
Yixing Geng,
Chen Lin,
Wenjun Ma,
Yanying Zhao,
Haoran Wang,
Fulong Liu,
Chuangye He,
Jinqing Yu
, et al. (7 additional authors not shown)
Abstract:
Isomers, ubiquitous populations of relatively long-lived nuclear excited states, play a crucial role in nuclear physics. However, isomers with half-life times of several seconds or less barely had experimental cross section data due to the lack of a suitable measuring method. We report a method of online γ spectroscopy for ultra-short-lived isomers from photonuclear reactions using laser-driven ul…
▽ More
Isomers, ubiquitous populations of relatively long-lived nuclear excited states, play a crucial role in nuclear physics. However, isomers with half-life times of several seconds or less barely had experimental cross section data due to the lack of a suitable measuring method. We report a method of online γ spectroscopy for ultra-short-lived isomers from photonuclear reactions using laser-driven ultra-intense γ-rays. The fastest time resolution can reach sub-ps level with γ-ray intensities >10^{19}/s ({\geqslant} 8 MeV). The ^{115}In(γ, n)^{114m2}In reaction (T_{1/2} = 43.1 ms) was first measured in the high-energy region which shed light on the nuclear structure studies of In element. Simulations showed it would be an efficient way to study ^{229m}Th (T_{1/2} = 7 μs), which is believed to be the next generation of nuclear clock. This work offered a unique way of gaining insight into ultra-short lifetimes and promised an effective way to fill the gap in relevant experimental data.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
Elastic interactions compete with persistent cell motility to drive durotaxis
Authors:
Subhaya Bose,
Haiqin Wang,
Xinpeng Xu,
Arvind Gopinath,
Kinjal Dasbiswas
Abstract:
Many animal cells crawling on elastic substrates exhibit durotaxis and have implications in several biological processes including tissue development, and tumor progression. Here, we introduce a phenomenological model for durotactic migration incorporating both elastic deformation-mediated cell-substrate interactions and the stochasticity of cell migration. Our model is motivated by the key observ…
▽ More
Many animal cells crawling on elastic substrates exhibit durotaxis and have implications in several biological processes including tissue development, and tumor progression. Here, we introduce a phenomenological model for durotactic migration incorporating both elastic deformation-mediated cell-substrate interactions and the stochasticity of cell migration. Our model is motivated by the key observation in one of the first demonstrations of durotaxis: a single contractile cell at an interface between a softer and a stiffer region of an elastic substrate reorients and migrates towards the stiffer region. We model migrating cells as self-propelling, persistently motile agents that exert contractile, dipolar traction forces on the underlying elastic substrate. The resulting substrate deformations induce elastic interactions with mechanical boundaries, captured by an elastic potential that depends on cell position and orientation relative to the boundary. The potential is attractive or repulsive depending on whether the mechanical boundary condition is clamped or free, which represents the cell being on the softer or stiffer side, respectively, of a confining boundary. The forces and torques from the interactions drive cells to orient perpendicular (parallel) to the boundary and accumulate (deplete) at the clamped (free) boundary, extent of which is determined by elastic potential (A) and motility (Pe). While the elastic interaction drives durotaxis, cell migratory movements such as random reorientation and self-propulsion enable the cell from the attractive potential thereby reducing durotaxis. We define metrics quantifying boundary accumulation and durotaxis and present a phase diagram that identifies three possible regimes: durotaxis, adurotaxis without accumulation and adurotaxis with motility-induced accumulation at a confining boundary.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.