-
Transmon-qubit readout using in-situ bifurcation amplification in the mesoscopic regime
Authors:
R. Dassonneville,
T. Ramos,
V. Milchakov,
C. Mori,
L. Planat,
F. Foroughi,
C. Naud,
W. Hasch-Guichard,
J. J. Garcia-Ripoll,
N. Roch,
O. Buisson
Abstract:
We demonstrate a transmon qubit readout based on the nonlinear response to a drive of polaritonic meters in-situ coupled to the qubit. Inside a 3D readout cavity, we place a transmon molecule consisting of a transmon qubit and an ancilla mode interacting via non-perturbative cross-Kerr coupling. The cavity couples strongly only to the ancilla mode, leading to hybridized lower and upper polaritonic…
▽ More
We demonstrate a transmon qubit readout based on the nonlinear response to a drive of polaritonic meters in-situ coupled to the qubit. Inside a 3D readout cavity, we place a transmon molecule consisting of a transmon qubit and an ancilla mode interacting via non-perturbative cross-Kerr coupling. The cavity couples strongly only to the ancilla mode, leading to hybridized lower and upper polaritonic meters. Both polaritons are anharmonic and dissipative, as they inherit a self-Kerr nonlinearity $U$ from the ancilla and effective decay $κ$ from the open cavity. Via the ancilla, the polariton meters also inherit the non-perturbative cross-Kerr coupling to the qubit. This results in a high qubit-dependent displacement $2χ> κ, ~U$ that can be read out via the cavity without causing Purcell decay. Moreover, the polariton meters, being nonlinear resonators, present bistability, and bifurcation behavior when the probing power increases. In this work, we focus on the bifurcation at low power in the few-photon regime, called the mesoscopic regime, which is accessible when the self-Kerr and decay rates of the polariton meter are similar $U\sim κ$. Capitalizing on a latching mechanism by bifurcation, the readout is sensitive to transmon qubit relaxation error only in the first tens of nanoseconds. We thus report a single-shot fidelity of 98.6 $\%$ while having an integration time of a 500 ns and no requirement for an external quantum-limited amplifier.
△ Less
Submitted 24 January, 2024; v1 submitted 10 October, 2022;
originally announced October 2022.
-
Minimizing the discrimination time for quantum states of an artificial atom
Authors:
Ivan Takmakov,
Patrick Winkel,
Farshad Foroughi,
Luca Planat,
Daria Gusenkova,
Martin Spiecker,
Dennis Rieger,
Lukas Grünhaupt,
Alexey V. Ustinov,
Wolfgang Wernsdorfer,
Ioan M. Pop,
Nicolas Roch
Abstract:
Fast discrimination between quantum states of superconducting artificial atoms is an important ingredient for quantum information processing. In circuit quantum electrodynamics, increasing the signal field amplitude in the readout resonator, dispersively coupled to the artificial atom, improves the signal-to-noise ratio and increases the measurement strength. Here we employ this effect over two or…
▽ More
Fast discrimination between quantum states of superconducting artificial atoms is an important ingredient for quantum information processing. In circuit quantum electrodynamics, increasing the signal field amplitude in the readout resonator, dispersively coupled to the artificial atom, improves the signal-to-noise ratio and increases the measurement strength. Here we employ this effect over two orders of magnitude in readout power, made possible by the unique combination of a dimer Josephson junction array amplifier with a large dynamic range, and the fact that the readout of our granular aluminum fluxonium artificial atom remained quantum-non-demolition (QND) at relatively large photon numbers in the readout resonator, up to $\overline{n} = 110$. Using Bayesian inference, this allows us to detect quantum jumps faster than the readout resonator response time $2/κ$, where $κ$ is the bandwidth of the readout resonator.
△ Less
Submitted 18 November, 2020; v1 submitted 17 November, 2020;
originally announced November 2020.
-
Observation of quantum many-body effects due to zero point fluctuations in superconducting circuits
Authors:
Sebastien Leger,
Javier Puertas-Martinez,
Karthik Bharadwaj,
Remy Dassonneville,
Jovian Delaforce,
Farshad Foroughi,
Vladimir Milchakov,
Luca Planat,
Olivier Buisson,
Cecile Naud,
Wiebke Hasch-Guichard,
Serge Florens,
Izak Snyman,
Nicolas Roch
Abstract:
Electromagnetic fields possess zero point fluctuations (ZPF) which lead to observable effects such as the Lamb shift and the Casimir effect. In the traditional quantum optics domain, these corrections remain perturbative due to the smallness of the fine structure constant. To provide a direct observation of non-perturbative effects driven by ZPF in an open quantum system we wire a highly non-linea…
▽ More
Electromagnetic fields possess zero point fluctuations (ZPF) which lead to observable effects such as the Lamb shift and the Casimir effect. In the traditional quantum optics domain, these corrections remain perturbative due to the smallness of the fine structure constant. To provide a direct observation of non-perturbative effects driven by ZPF in an open quantum system we wire a highly non-linear Josephson junction to a high impedance transmission line, allowing large phase fluctuations across the junction. Consequently, the resonance of the former acquires a relative frequency shift that is orders of magnitude larger than for natural atoms. Detailed modelling confirms that this renormalization is non-linear and quantum. Remarkably, the junction transfers its non-linearity to about 30 environmental modes, a striking back-action effect that transcends the standard Caldeira-Leggett paradigm. This work opens many exciting prospects for longstanding quests such as the tailoring of many-body Hamiltonians in the strongly non-linear regime, the observation of Bloch oscillations, or the development of high-impedance qubits.
△ Less
Submitted 18 October, 2019;
originally announced October 2019.
-
Non-degenerate parametric amplifiers based on dispersion engineered Josephson junction arrays
Authors:
Patrick Winkel,
Ivan Takmakov,
Dennis Rieger,
Luca Planat,
Wiebke Hasch-Guichard,
Lukas Grünhaupt,
Nataliya Maleeva,
Farshad Foroughi,
Fabio Henriques,
Kiril Borisov,
Julian Ferrero,
Alexey V. Ustinov,
Wolfgang Wernsdorfer,
Nicolas Roch,
Ioan M. Pop
Abstract:
Determining the state of a qubit on a timescale much shorter than its relaxation time is an essential requirement for quantum information processing. With the aid of a new type of non-degenerate parametric amplifier, we demonstrate the continuous detection of quantum jumps of a transmon qubit with 90% fidelity in state discrimination. Entirely fabricated with standard two-step optical lithography…
▽ More
Determining the state of a qubit on a timescale much shorter than its relaxation time is an essential requirement for quantum information processing. With the aid of a new type of non-degenerate parametric amplifier, we demonstrate the continuous detection of quantum jumps of a transmon qubit with 90% fidelity in state discrimination. Entirely fabricated with standard two-step optical lithography techniques, this type of parametric amplifier consists of a dispersion engineered Josephson junction (JJ) array. By using long arrays, containing $10^3$ JJs, we can obtain amplification at multiple eigenmodes with frequencies below $10~\mathrm{GHz}$, which is the typical range for qubit readout. Moreover, by introducing a moderate flux tunability of each mode, employing superconducting quantum interference device (SQUID) junctions, a single amplifier device could potentially cover the entire frequency band between 1 and $10~\mathrm{GHz}$.
△ Less
Submitted 27 October, 2023; v1 submitted 17 September, 2019;
originally announced September 2019.
-
Fabrication and characterization of aluminum SQUID transmission lines
Authors:
Luca Planat,
Ekaterina Al-Tavil,
Javier Puertas Martinez,
Remy Dassonneville,
Farshad Foroughi,
Sebastien Leger,
Karthik Bharadwaj,
Jovian Delaforce,
Vladimir Milchakov,
Cecile Naud,
Olivier Buisson,
Wiebke Hasch-Guichard,
Nicolas Roch
Abstract:
We report on the fabrication and characterization of 50 Ohms, flux-tunable, low-loss, SQUID-based transmission lines. The fabrication process relies on the deposition of a thin dielectric layer (few tens of nanometers) via Atomic Layer Deposition (ALD) on top of a SQUID array, the whole structure is then covered by a non-superconducting metallic top ground plane. We present experimental results fr…
▽ More
We report on the fabrication and characterization of 50 Ohms, flux-tunable, low-loss, SQUID-based transmission lines. The fabrication process relies on the deposition of a thin dielectric layer (few tens of nanometers) via Atomic Layer Deposition (ALD) on top of a SQUID array, the whole structure is then covered by a non-superconducting metallic top ground plane. We present experimental results from five different samples. We systematically characterize their microscopic parameters by measuring the propagating phase in these structures. We also investigate losses and discriminate conductor from dielectric losses. This fabrication method offers several advantages. First, the SQUID array fabrication does not rely on a Niobium tri-layer process but on a simpler double angle evaporation technique. Second, ALD provides high quality dielectric leading to low-loss devices. Further, the SQUID array fabrication is based on a standard, all-aluminum process, allowing direct integration with superconducting qubits. Moreover, our devices are in-situ flux tunable, allowing mitigation of incertitude inherent to any fabrication process. Finally, the unit cell being a single SQUID (no extra ground capacitance is needed), it is straightforward to modulate the size of the unit cell periodically, allowing band-engineering. This fabrication process can be directly applied to traveling wave parametric amplifiers.
△ Less
Submitted 23 July, 2019;
originally announced July 2019.
-
Fast high fidelity quantum non-demolition qubit readout via a non-perturbative cross-Kerr coupling
Authors:
R. Dassonneville,
T. Ramos,
V. Milchakov,
L. Planat,
É. Dumur,
F. Foroughi,
J. Puertas,
S. Leger,
K. Bharadwaj,
J. Delaforce,
C. Naud,
W. Hasch-Guichard,
J. J. García-Ripoll,
N. Roch,
O. Buisson
Abstract:
Qubit readout is an indispensable element of any quantum information processor. In this work, we experimentally demonstrate a non-perturbative cross-Kerr coupling between a transmon and a polariton mode which enables an improved quantum non-demolition (QND) readout for superconducting qubits. The new mechanism uses the same experimental techniques as the standard QND qubit readout in the dispersiv…
▽ More
Qubit readout is an indispensable element of any quantum information processor. In this work, we experimentally demonstrate a non-perturbative cross-Kerr coupling between a transmon and a polariton mode which enables an improved quantum non-demolition (QND) readout for superconducting qubits. The new mechanism uses the same experimental techniques as the standard QND qubit readout in the dispersive approximation, but due to its non-perturbative nature, it maximizes the speed, the single-shot fidelity and the QND properties of the readout. In addition, it minimizes the effect of unwanted decay channels such as the Purcell effect. We observed a single-shot readout fidelity of 97.4% for short 50 ns pulses, and we quantified a QND-ness of 99% for long measurement pulses with repeated single-shot readouts.
△ Less
Submitted 27 February, 2020; v1 submitted 1 May, 2019;
originally announced May 2019.
-
Understanding the saturation power of Josephson Parametric Amplifiers made from SQUIDs arrays
Authors:
Luca Planat,
Remy Dassonneville,
Javier Puertas Martinez,
Farshad Foroughi,
Olivier Buisson,
Wiebke Hasch-Guichard,
Cecile Naud,
R. Vijay,
Kater Murch,
Nicolas Roch
Abstract:
We report on the implementation and detailed modelling of a Josephson Parametric Amplifier (JPA) made from an array of eighty Superconducting QUantum Interference Devices (SQUIDs), forming a non-linear quarter-wave resonator. This device was fabricated using a very simple single step fabrication process. It shows a large bandwidth (45 MHz), an operating frequency tunable between 5.9 GHz and 6.8 GH…
▽ More
We report on the implementation and detailed modelling of a Josephson Parametric Amplifier (JPA) made from an array of eighty Superconducting QUantum Interference Devices (SQUIDs), forming a non-linear quarter-wave resonator. This device was fabricated using a very simple single step fabrication process. It shows a large bandwidth (45 MHz), an operating frequency tunable between 5.9 GHz and 6.8 GHz and a large input saturation power (-117 dBm) when biased to obtain 20 dB of gain. Despite the length of the SQUID array being comparable to the wavelength, we present a model based on an effective non-linear LC series resonator that quantitatively describes these figures of merit without fitting parameters. Our work illustrates the advantage of using array-based JPA since a single-SQUID device showing the same bandwidth and resonant frequency would display a saturation power 15 dB lower.
△ Less
Submitted 3 April, 2019; v1 submitted 22 September, 2018;
originally announced September 2018.
-
A tunable Josephson platform to explore many-body quantum optics in circuit-QED
Authors:
Javier Puertas Martinez,
Sebastien Leger,
Nicolas Gheeraert,
Remy Dassonneville,
Luca Planat,
Farshad Foroughi,
Yuriy Krupko,
Olivier Buisson,
Cecile Naud,
Wiebke Guichard,
Serge Florens,
Izak Snyman,
Nicolas Roch
Abstract:
Coupling an isolated emitter to a single mode of the electromagnetic field is now routinely achieved and well understood. Current efforts aim to explore the coherent dynamics of emitters coupled to several electromagnetic modes (EM). freedom. Recently, ultrastrong coupling to a transmission line has been achieved where the emitter resonance broadens to a significant fraction of its frequency. In t…
▽ More
Coupling an isolated emitter to a single mode of the electromagnetic field is now routinely achieved and well understood. Current efforts aim to explore the coherent dynamics of emitters coupled to several electromagnetic modes (EM). freedom. Recently, ultrastrong coupling to a transmission line has been achieved where the emitter resonance broadens to a significant fraction of its frequency. In this work we gain significantly improved control over this regime. We do so by combining the simplicity of a transmon qubit and a bespoke EM environment with a high density of discrete modes, hosted inside a superconducting metamaterial. This produces a unique device in which the hybridisation between the qubit and up to 10 environmental modes can be monitored directly. Moreover the frequency and broadening of the qubit resonance can be tuned independently of each other in situ. We experimentally demonstrate that our device combines this tunability with ultrastrong coupling and a qubit nonlinearity comparable to the other relevant energy scales in the system. We also develop a quantitative theoretical description that does not contain any phenomenological parameters and that accurately takes into account vacuum fluctuations of our large scale quantum circuit in the regime of ultrastrong coupling and intermediate non-linearity. The demonstration of this new platform combined with a quantitative modelling brings closer the prospect of experimentally studying many-body effects in quantum optics. A limitation of the current device is the intermediate nonlinearity of the qubit. Pushing it further will induce fully developed many-body effects, such as a giant Lamb shift or nonclassical states of multimode optical fields. Observing such effects would establish interesting links between quantum optics and the physics of quantum impurities.
△ Less
Submitted 9 April, 2019; v1 submitted 2 February, 2018;
originally announced February 2018.
