Stop the war!Остановите войну!
for scientists:
default search action
Google
Google Scholar
Semantic Scholar
Internet Archive Scholar
CiteSeerX
ORCID26th ISIE 2017: Edinburgh, UK
- 26th IEEE International Symposium on Industrial Electronics, ISIE 2017, Edinburgh, United Kingdom, June 19-21, 2017. IEEE 2017, ISBN 978-1-5090-1412-5
- Wenzhou Lu, Manman Xue, Jiqiang Xu, Haiying Chen:
Ak±1-order harmonic repetitive controller for single-phase micro-grid power converter system with nonlinear loads. 21-25 - Burcu Mantar Gundogdu
, Shahab Nejad, Daniel Thomas Gladwin, David A. Stone:
A battery energy management strategy for UK enhanced frequency response. 26-31 - Fathy Aboshady, Mark Sumner, David W. P. Thomas:
A double end fault location technique for distribution systems based on fault-generated transients. 32-36 - Wei Peng, Peter Sokolowski, Ragini Patel, Xinghuo Yu, Damminda Alahakoon:
A multi-agent simulation framework for distributed generation with battery storage. 37-42 - Lu Wang, Suleiman M. Sharkh, Andy Chipperfield:
A∗-based optimal coordination of vehicle-to-grid batteries and renewable generators in a distribution network. 43-50 - Yajuan Guan, Juan C. Vasquez, Josep M. Guerrero:
An enhanced hierarchical control strategy for the Internet of Things-based home scale microgrid. 51-56 - Lucas Savoi de Araujo, Marcelo Gradella Villalva, Thais Gama Siqueira:
Autonomous microgrid with energy storage system. 57-62 - Serdar Kadam, Benoit Bletterie:
Balancing the grid with single-phase PV-installations. 63-69 - Carlos Xavier Rosero, Pau Martí, Manel Velasco, Miguel Castilla, Jaume Miret, Antonio Camacho:
Consensus for active power sharing and frequency restoration in islanded microgrids subject to drifting clocks. 70-75 - Walid R. Issa, Suleiman M. Sharkh, Rashid Albadwawi, Mohammad A. Abusara, Tapas K. Mallick:
DC link voltage control during sudden load changes in AC microgrids. 76-81 - Ileana-Diana Nicolae, Petre-Marian Nicolae, Radu-Florin Marinescu:
Dealing with noise polluting electric signals acquired from a large power group. 82-87 - Chun-Lien Su, Yu-Chi Pu, Hai-Ming Ching, Chao-Lin Kuo, Jheng-He Kuo:
Design of transformer load monitoring systems by utilizing smart meter data. 88-92 - Tommaso Caldognetto, Paolo Tenti, Danilo Iglesias Brandao:
Fully-dispatchable microgrid: Architecture, implementation and experimental validation. 93-98 - Diego Arcos-Aviles, Danny Sotomayor, Jacqueline Llanos-Proaño, Francesc Guinjoan, Martin P. Marietta, Julio Pascual, Luis Marroyo, Pablo Sanchis:
Fuzzy energy management strategy based on microgrid energy rate-of-change applied to an electro-thermal residential microgrid. 99-105 - Gheorghe Grigoras, Bogdan Constantin Neagu, Florina Scarlatache, Romeo-Cristian Ciobanu:
Identification of pilot nodes for secondary voltage control using K-means clustering algorithm. 106-110 - Julia Noce, Yona Lopes, Natalia Castro Fernandes, Célio Vinicius Neves de Albuquerque, Débora C. Muchaluat-Saade:
Identifying vulnerabilities in smart gric communication networks of electrical substations using GEESE 2.0. 111-116 - Yen-Chih Yeh, Men-Shen Tsai:
Impact simulation of PEV parking lots to power distribution systems. 117-122 - Brandon Blackstone, Christopher Hicks, Octavio Gonzalez, Yahia Baghzouz:
Improved islanded operation of a diesel generator - PV microgrid with advanced inverter. 123-127 - Martin P. Marietta, Bruno Samaniego, Francesc Guinjoan, Guillermo Velasco, Robert Piqué, Hugo Valderrama-Blavi:
Integration of a Pb-acid battery management algorithm into optimization control strategies for microgrid systems. 128-134 - Wesley Doorsamy, Pitshou N. Bokoro:
On-line monitoring of metal-oxide surge arresters using improved equivalent model with evolutionary optimisation algorithm. 135-139 - Silvia Marzal, Robert Salas-Puente, Raúl González-Medina, Emilio Figueres, Gabriel Garcerá:
Peer-to-peer decentralized control structure for real time monitoring and control of microgrids. 140-145 - Jose Aglailson Silva de Olivindo, Isaac Rocha Machado:
Shunt active power filter for energy quality improvement in distributed generation systems. 146-151 - Stefan Wilker, Marcus Meisel, Thilo Sauter:
Smart grid architecture model standardization and the applicability of domain language specific modeling tools. 152-157 - Jiantao Sun, Jinzhong Li, Ke Wang, Chao Wu, Yuzhou Qiu, Xinru Yu:
Study on operating performance of transformer and scaling model with DC bias. 158-162 - Andrey V. Pazderin, Andrey A. Pazderin, Nikita D. Mukhlynin:
Technical and economic model of energy transmission and distribution based on the smart metering technologies. 163-168 - Faical Turki, Marc Detweiler, Thomas Vosshagen:
Three phase high power contactless power supply for harbour automated guided vehicles. 169-174 - Edhuardo Francisco Celli Grabovski, Samir Ahmad Mussa:
Three-phase frequency estimator in smart grid applications: Practical issues using FPGA. 175-179 - Matheus Pereira Antunes, Igor Delgado de Melo, José Luiz Rezende Pereira, Matheus Alberto de Souza, Nathan de Lima Silva:
Voltage sag detection methods based on synchronized phasor measurements using RTDS. 180-185 - Mohammad Moradi Ghahderijani, Miguel Castilla, Luis García de Vicuña, Antonio Camacho, Javier Torres-Martinez:
Voltage sag mitigation in a PV-based industrial microgrid during grid faults. 186-191 - Maria Carmela di Piazza, Marcello Pucci:
A comprehensive dynamic model for accurate power efficiency analysis in induction motor drives. 195-201 - Mateus Giesbrecht:
A method to determine load conditions for salient pole synchronous machine quadrature axis parameters determination. 202-208 - Hanlin Shen, Chengwei Zhang:
A new efficient sensorless I/f control method for IPMSM drives. 209-213 - Qian Chen, Xun Fan, Guohai Liu, Wenxiang Zhao, Jinghua Ji, Liang Xu, Gaohong Xu:
A new fault-tolerance motor with decoupled reluctance channel and PM channel. 214-219 - Zhongxu Wang, Huai Wang, Yong Li, Frede Blaabjerg:
A single position loop control strategy for high-speed voice coil motor based on active disturbance rejection control. 220-225 - Sarayut Amornwongpeeti, Oleh Kiselychnyk, Jihong Wang, Nastaran Shatti, Nirav P. Shah, Michail Soumelidis:
Adaptive torque control of IPMSM motor drives for electric vehicles. 226-231 - Vittaya Tipsuwanporn, Khomkrit Kaenthong, Arjin Numsomran, Anuchit Charean, Winyu Sawaengsinkasikit:
Asymmetrical two-phase induction motor speed controlled by multilevel inverter employing cascaded transformers. 232-237 - Tian-Hua Liu, Shao-Kai Tseng, Maobin Lu:
Auto-tuning flux-weakening control for an IPMSM drive system using a predictive controller. 238-243 - Anton H. Tamas, Claudia S. Martis, Simon Wiedemann, Ralph M. Kennel:
Comparison between linear- and nonlinear-feedback control for a synchronous reluctance machine. 244-251 - Liang Xu, Guohai Liu, Wenxiang Zhao, Jinghua Ji, Qian Chen:
Comparison of two linear hybrid excitation flux reversal machines with different permanent-magnet arrays. 252-256 - Ricardo Picatoste, Mark Butcher, Alessandro Masi:
Current control strategy for electric motor drives using long cables. 257-262 - Mesut Ugur, Ozan Keysan:
DC link capacitor optimization for integrated modular motor drives. 263-270 - Umberto Abronzini, Ciro Attaianese, Matilde D'Arpino, Mauro Di Monaco, Vito Nardi, Giuseppe Tomasso:
Dead time and nonlinearities compensation for VSI feeding AC drives. 271-276 - Mateusz Korzonek, Teresa Orlowska-Kowalska:
Dependence of the adaptive full-order observer stability on parameter identification errors. 277-283 - Koki Sakuma, Shunya Takano, Tomoyuki Shimono, Takahiro Mizoguchi:
Design and analysis of coreless multi-layered permanent magnet synchronous motor. 284-289 - Martin Novak, Jaroslav Novak, Zdenek Novak, Jan Chysky, Oleg Sivkov:
Efficiency mapping of a 100 kW PMSM for traction applications. 290-295 - Simon Wiedemann, Ralph M. Kennel:
Encoderless self-commissioning and identification of synchronous reluctance machines at standstill. 296-302 - Yang Feng, JunBum Kwon, Xiongfei Wang, Frede Blaabjerg:
Harmonic coupling analysis of a multi-drive system with slim DC-link drive. 303-308 - Marcio L. M. Kimpara, Pedro Ribeiro Luiz, E. B. Silva, João O. P. Pinto, Darizon A. de Andrade, Babak Fahimi, Burak Ozpineci, Morgan Kiani:
Improvement in torque profile of switched reluctance motors. 309-314 - Wesley Doorsamy, Mbika Muteba, Bhekisipho Twala, Dan Valentin Nicolae:
Investigation into effects of a novel rotor cut-off design for synchronous reluctance machines. 315-320 - Amesh Narain Singh, Willem A. Cronje, Wesley Doorsamy:
Investigation of thermal instability testing on synchronous generator rotors using an experimental direct mapping method. 321-328 - Apurv Kumar Yadav, Mathews Boby, Sumit Pramanick, K. Gopakumar, Leopoldo García Franquelo:
Multilevel dodecagonal space vector generation using stacked inverter cells for IM drives. 329-334 - Jen-Hau Tau, Yin-Yu Tzou:
PFC control of electrolytic capacitor-less PMSM drives for home appliances. 335-341 - Morgan Kiani, Wei Wang, Lei Gu, Babak Fahimi:
PM-assist double stator synchronous machine. 342-347 - T. Himabindu, A. V. Ravi Teja, G. Bhuvaneswari, Bhim Singh:
Predictive torque control of a three-level reduced switch inverter fed induction motor drive. 348-353 - Hauke Nannen, Heiko Zatocil:
Sensorless start-up of soft starter driven line-start PMSM based on back EMF measurement. 354-361 - T. Himabindu, A. V. Ravi Teja, G. Bhuvaneswari, Bhim Singh:
Simplified predictive torque control of an IM drive with efficient zero vector placement. 362-367 - Tobias Mueller, Chan H. See, Arfan Ghani, Peter Thiemann:
Simulation of PMSM in maxwell 3D/simplorer to optimize direct flux control. 368-373 - Luca Ferraris, Fausto Franchini, Emir Poskovic:
Study of the Halbach magnetization in small PM electrical machines adopting the bonded magnets. 374-380 - Xiaodong Jiang, Fengge Zhang, Yingguang Li:
The research on temperature field and flow field of brushless doubly-fed generator with cage-barrier rotor. 381-386 - Zheyuan Cheng, Mo-Yuen Chow, Daebong Jung, Jinyong Jeon:
A big data based deep learning approach for vehicle speed prediction. 389-394 - Piotr Derugo:
Adaptive neuro fuzzy PID type II DC shunt motor speed controller with Petri Transition layer. 395-400 - Silvia Maria Zanoli, Crescenzo Pepe, Luca Barboni, Francesco Cocchioni:
Advanced process control for energy efficiency increase in a walking beam reheating furnace. 401-406 - Mingyu Gao, Xiao Li, Yuxiang Yang, Zhiwei He, Jiye Huang:
An automatic sealing system for battery lid based on machine vision. 407-411 - Guo-Zhen He, Yau-Tarng Juang, Jason Sheng-Hong Tsai, Yun-You Lin, Shu-Mei Guo, Leang-San Shieh, Tzong-Jiy Tsai:
An effective optimal linear quadratic analog tracker for the system with unknown disturbances. 412-417 - Mircea-Bogdan Radac, Radu-Emil Precup, Raul-Cristian Roman:
Anti-lock braking systems data-driven control using Q-learning. 418-423 - Maher Algreer, Matthew Armstrong, Volker Pickert:
Comprehensive library of digital fuzzy PID control structures for power electronic systems. 424-429 - Michael V. Basin, Pablo Cesar Rodriguez-Ramirez, Fernando Guerra-Avellaneda:
Continuous fixed-time controller for stabilizing an armature-controlled DC motor. 430-435 - Chang-Hyun Kim, Chang-Wan Ha, Jaewon Lim, Jong-Min Lee, Doh Young Park:
Control characteristics of passive maglev transport system. 436-441 - Paulo Jefferson Dias de Oliveira Evald, Jusoan Lang Mor, Silvia Silva da Costa Botelho, Rodrigo Zelir Azzolin:
Control of linear welding robot plant by pole placement control based on discrete Kalman Filter. 442-447 - Jan Glos, Frantisek Solc:
Determination of optimum high-side pressure of R744 automotive heat pump using Fibonacci search method. 448-453 - Jorge Hurel, Juan Peralta, Jorge Amaya, Bolivar Flores, Francisca Flores:
Determination of the equivalent parameters for modelling a McPherson suspension with a quarter-car model. 454-459 - Luca Cavanini, Luigi Colombo, Gianluca Ippoliti, Giuseppe Orlando:
Development and experimental validation of a LQG control for a pre-compensated multi-axis piezosystem. 460-465 - Miguel Hernández-González, Michael V. Basin:
Discrete-time controller for stochastic polynomial systems with Poisson noises. 466-471 - Mattia Forato, Manuele Bertoluzzo, Giuseppe Buja:
Modeling of the dynamics of a resonant wireless power transfer circuit. 472-477 - Paulo Jefferson Dias de Oliveira Evald, Jusoan Lang Mor, Silvia Silva da Costa Botelho, Rodrigo Zelir Azzolin:
Feedback control based on estimators applied on welding robot motor. 478-483 - Haissam El-Aawar:
Friendly re-programmed social robot. 484-489 - Nawfal N. Al-Saaty, Maher Algreer, Matthew Armstrong:
Hardware/software co-design techniques for compass search self-tuning PID controller in DC drive applications. 490-495 - Achilleas Markou, Vasilis Kleftakis, Panos Kotsampopoulos, Nikos D. Hatziargyriou:
Improving existing methods for stable and more accurate Power Hardware-in-the-Loop experiments. 496-502 - Tong Wu, John Y. Hung:
Lateral position control for a tractor-trailer system using steering rate input. 503-507 - Jilan Samiuddin, Babak Badkoubeh-Hezaveh, Mahsa Sadeghassadi, Jeff K. Pieper, Chris J. B. Macnab:
Nonlinear adaptive control of a transcritical Organic Rankine Cycle. 513-519 - Jie Ding, Changyun Wen, Guoqi Li:
Optimal control of weighted networks based on node connection strength. 520-525 - Zhengguo Li, Ying Zou, Changyun Wen:
Parking of nonholonomic mobile robots via switched control in the discrete time domain. 526-532 - Hirotaka Nakayama, Ryo Tanaka, Yoshihisa Ishida, Naoki Matsumoto:
Perfect model-following system using active disturbance rejection control. 533-538 - Paulo Jefferson Dias de Oliveira Evald, Jusoan Lang Mor, Débora Debiaze de Paula, Andreyna Sarila Ramos Ferreira, Silvia Silva da Costa Botelho, Rodrigo Zelir Azzolin:
Performance comparison of control strategies applied on welding robot plant. 539-544 - Ui-Suk Suh, Yunha Lee, Won-Sang Ra:
Robust bearing angle estimator for low-cost 1-axis gimballed ultrasonic seeker. 545-551 - Hansheng Wu:
Simple adaptive robust output tracking controllers for uncertain nonlinear time-delay systems with dead-zone input. 552-557 - Xia Du, Chi-Seng Lam, Sai-Weng Sin, Man-Kay Law, Franco Maloberti, Man-Chung Wong, Seng-Pan U, Rui Paulo Martins:
A digital PWM controlled KY step-up converter based on frequency domain ΣΔ ADC. 561-564 - Van-Binh Vu, Luqman Bin Mohamad Kamal, Jasper Tay, Volker Pickert, Mohamed Dahidah, Thillainathan Logenthiran, Van-Tung Phan:
A multi-output capacitive charger for electric vehicles. 565-569 - Qianwen Xu, Chuanlin Zhang, Changyun Wen, Peng Wang, Meng Yeong Lee:
A novel adaptive backstepping controller for stabilization of DC/DC converter feeding constant power load. 570-575 - He Liu, Mohamed Dahidah, R. T. Naayagi, Matthew Armstrong, James Yu:
A novel modular multilevel step-up DC/DC converter for offshore systems. 576-581 - Vitor Monteiro, J. G. Pinto, Andrés A. Nogueiras Meléndez, João Luiz Afonso:
A novel single-phase five-level active rectifier for on-board EV battery chargers. 582-587 - Xinyu Yu, Qirong Jiang, Xiaorong Xie, Yingdong Wei, Chunpeng Zhang:
A universal arm-averaged model for accelerated EMT simulation of MMCs based on various submodule circuits. 588-593 - Jingling Cheng, Dongdong Chen, Yaowei Hu, Guozhu Chen:
An improved SHE algorithm and filter design method for high power grid-connected converter under unbalanced and harmonic distorted grid. 594-599 - Hao Ma, Yuan Tan, Li Du, Xu Han, Jing Ji:
An integrated design of power converters for electric vehicles. 600-605 - Dongdong Chen, Jingling Cheng, Yaowei Hu, Guozhu Chen:
Analysis and design of fast-transient strategy based on modified fast repetitive control for shunt active power filter. 606-611 - Peng Luo, Hong Yao Long, Mark R. Sweet, Merlyne M. De Souza, Ekkanath Madathil Shankara Narayanan:
Analysis of a clustered IGBT and silicon carbide MOSFET hybrid switch. 612-615 - Asier Matallana, Jon Andreu, Jose Ignacio Garate, Iñigo Martínez de Alegría, Iñigo Kortabarria:
Analysis of impedance and current distributions in parallel IGBT design. 616-621 - Panteleimon Papamanolis, Dominik Neumayr, Johann W. Kolar:
Behavior of the flying capacitor converter under critical operating conditions. 628-635 - Sven Bolte, Lukas Keuck, Jehan Khan Afridi, Norbert Fröhleke, Joachim Böcker:
Calorimetric measurements with compensating temperature control. 636-639 - Luo-Na Du, Kehan Zhang, Xinyi Zhang, Bai-Wei Song, Demin Xu:
Circuit model and power distribution model of wireless power transfer system in air. 640-644 - Juan Jose Cabezas, Raúl González-Medina, Emilio Figueres, Gabriel Garcerá:
Comparison and combination of digital controls for single-phase boost PFC converters in avionic power systems. 645-650 - Fernanda Carnielutti, Benhur Tessele, Jean de Parish, Jorge Rodrigo Massing, Humberto Pinheiro:
Control scheme for a cascaded multilevel converter used in low-voltage-ride-through tests of grid-connected wind turbines. 651-656 - Mohammad Moradi Ghahderijani, Miguel Castilla, Jaume Miret, Ramon Guzman, Juan Manuel Rey:
Control scheme for a multiple-output DC/DC current source parallel resonant converter. 657-662 - Ioan Serban, Catalin Petrea Ion:
Control strategy aiming at increasing the dynamic response capability of autonomous microgrids. 663-669 - Javier Vázquez del Real, Pedro Roncero-Sánchez, Alfonso Parreno Torres:
Coupling factor of a weak inductive coupling in a 2-kW power transfer system with a 125-mm air gap for electric vehicle chargers. 670-675 - Rodrigo P. Faria, Caio P. Gouvea, Joao Carlos Vilela de Castro, Ronilson Rocha:
Design and implementation of a photovoltaic system for artificial satellites with regulated DC bus. 676-681 - Mingfei Wu, David Flynn, Artur Szymczak:
Design and implementation of ZVZCS in full bridge DC/DC converter with digital control in arc welding machines application. 682-687 - Catalina González-Castaño, Enric Vidal-Idiarte, Javier Calvente:
Design of a bidirectional DC/DC converter with coupled inductor for an electric vehicle application. 688-693 - Xinhong Fu, Ming Liu, Zefan Tang, Chengbin Ma:
Design procedure of a class E2 DC-DC converter for megahertz wireless power transfer based on a compact class E current-driven rectifier. 694-699 - Tsung-Hsi Wu, Jhih-Kai Wang, Chin-Sien Moo, Yao Ching Hsieh:
Discharging scenario of series buck-boost type battery power modules with charge equalization. 700-704 - Miroslav Pavelek, Michal Frivaldsky, Pavol Spánik:
Distribution and shaping of magnetic field of wireless energy transfer system. 705-710 - Marija Vujacic, Manel Hammami, Milan Srndovic, Gabriele Grandi:
Evaluation of DC voltage ripple in three-phase PWM voltage source inverters. 711-716 - Dongye Li, Yichao Sun, Jianfeng Zhao, Zhendong Ji:
Fast pre-charge strategy of a modified MMC with enhanced DC fault ride-through capability. 717-722 - Jiao Jiao, John Y. Hung, R. Mark Nelms:
Gain scheduling control strategy for a single-phase grid-connected inverter. 723-728 - Ginés Doménech-Asensi, Tom J. Kazmierski:
Generation of new power processing structures exploiting genetic programming. 729-732 - Concettina Buccella, Maria Gabriella Cimoroni, Vincenzo Castiglia, Rosario Miceli, Giuseppe Schettino, Carlo Cecati:
Graphical THD minimization procedure for single phase five-level converters. 733-738 - Wai Keung Mo, Kasper M. Paasch:
Hybrid magnetic design. 739-744 - Jialin Zhang, Yiming Zhang, Dakang Yuan:
Indirect modulation for current source PWM converter. 745-749 - Sanjay K. Chaudhary, Remus Teodorescu, Dimitrios Rizadis, Laszlo Mathe:
Low voltage fault ride through control in MMC-HVDC. 750-755 - Concettina Buccella, Maria Gabriella Cimoroni, Hamed Latafat, Mario Tinari, Carlo Cecati:
Mixed harmonic elimination and reduction technique for single phase nine level converters. 756-761 - Pablo Cossutta, Mathias Angelico Engelhardt, Miguel Pablo Aguirre, Juan Ponce, María Inés Valla:
Model predictive control of a multilevel current source inverter together with its current source. 762-767 - JianKai Ma, Mohamed Dahidah, Volker Pickert, James Yu:
Modular multilevel matrix converter for offshore low frequency AC transmission system. 768-774 - Jaime W. Zapata, Thierry A. Meynard, Samir Kouro:
Multi-channel partial power DC-DC converter for current balancing of LED strings. 775-780 - Jose A. Riveros, Joel Prieto, Hugo Guzman:
Multifrequency space vector pulse width modulation for asymmetrical six-phase drives. 781-786 - Robert Uhl, Amir Arasteh, Antonello Monti, Arne Hinz, Rik W. De Doncker:
Nodal-reduced modeling of three-phase dual-active bridge converters for EMTP-type simulations. 787-792 - P. N. Tekwani, Patel Vidhi Manilal:
Novel approach employing buck-boost converter as DC-link modulator and inverter as AC-chopper for induction motor drive applications: An alternative to conventional AC-DC-AC scheme. 793-800 - Shiang-Hwua Yu, Li-Wen Liu:
Observer-based compensation for improving dynamic response of a boost PFC rectifier. 801-804 - Siyu Peng, Ming Liu, Zefan Tang, Chengbin Ma:
Optimal design of megahertz wireless power transfer systems for biomedical implants. 805-810 - Achilleas Markou, Argiris G. Soldatos, Nikos D. Hatziargyriou:
Optimal nonlinear robust control of a boost converter. 811-814 - Laszlo Mathe:
Performance comparison of the modulators with balancing capability used in MMC applications. 815-820 - Amardeep B. Shitole, Hiralal M. Suryawanshi, Girish G. Talapur, Shelas Sathyan:
Performance improvement of grid interfaced three level diode clamped inverter under various power quality events. 821-826 - Xianzhi Meng, Kexu Sun, Jianxiong Xi, Lenian He:
Real time zero current detection with low quiescent current for synchronous DC-DC converter. 839-843 - Tanmoy Maity, Hanuman Prasad:
Real-time performance evaluation of quasi z-source inverter for induction motor drives. 844-849 - Cesar Augusto Arbugeri, Telles B. Lazzarin, Samir Ahmad Mussa:
Six-phase active PWM rectifier with stationary frame reference control. 856-860 - David Cabezuelo, Jon Andreu, Iñigo Kortabarria, Edorta Ibarra, Jose Ignacio Garate:
SRM converter topologies for EV application: State of the technology. 861-866 - Lajos Torok, Laszlo Mathe:
Stability analysis of a three-phase grid-connected DC power supply with small DC-link capacitor and voltage feed-forward compensation. 867-872 - Bahador Mohammadpour, Milad Zareie, Suzan Eren, Majid Pahlevani:
Stability analysis of the slip mode frequency shift islanding detection in single phase PV inverters. 873-878 - Jiao Jiao, John Y. Hung, R. M. Nelms:
State feedback control for single-phase grid-connected inverter under weak grid. 879-885 - Joel Prieto, Jose A. Riveros, Hugo Guzman:
Synchronized SVPWM techniques for five-phase drives. 886-892 - Bo Guan, Shinji Doki:
The compensation strategy on the drift voltage problem of dual modulation waves based neutral point potential control for three level converter. 893-898 - Rohit Suryadevara, Tao Li, Kumar Modepalli, Leila Parsa:
Three-phase current-fed soft-switching DC-DC converter. 899-904 - Vinicius Dario Bacon, Sérgio Augusto Oliveira da Silva:
Unified control design approach applied to four-wire shunt active power filter topologies. 905-912 - Acácio M. R. Amaral, António J. Marques Cardoso:
Unregulated AC-DC power supply under heavy load operation: Simulation and design. 913-918 - Takumi Ishii, Takahiro Iwase, Seiji Hashimoto, Bunji Homma, Kenji Suto, Hiroaki Okada, Hideki Okuno, Shunji Kumagai:
A flapping-based piezoelectric power generator for bicycle applications. 921-925 - Angelo Accetta, Maria Carmela di Piazza, Giuseppe La Tona, Massimiliano Luna, Marcello Pucci:
A high-performance FPGA-based virtual anemometer for MPPT of wind energy conversion systems. 926-933 - Gianluigi Buonocunto, Giovanni Spagnuolo, Walter Zamboni:
A Kalman filter based approach to PEM fuel cell fault detection. 934-939 - Jagath Sri Lal Senanayaka, Hamid Reza Karimi, Kjell G. Robbersmyr:
A novel soft-stall power control for a small wind turbine. 940-945 - Joanne Kitson, Samuel J. Williamson, Paul Harper, Chris M. McMahon, Ges Rosenberg, Michael Tierney, Karen Bell:
A photovoltaic panel modelling method for flexible implementation in Matlab/Simulink using datasheet quantities. 946-951 - Shatakshi, Ikhlaq Hussain, Bhim Singh, Sukumar Mishra:
A synchronous generator based diesel-PV hybric micro-grid with power quality controller. 952-956 - Konstantina Panagiotou, Christian Klumpner, Mark Sumner:
Being a member of an energy community: Assessing the financial benefits for end-users and management authority. 957-963 - Nan Chen, Tingcun Wei, Dong Sam Ha:
Circuit design for an impact-type piezoelectric system for micro-wind energy harvesting. 964-969 - L. H. Koh, Nyan Paing Soe, Hueh Chuah Ong, Zhe Zhang, Jun Jun Wang:
DC renewable connected building grid for intelligent LED lighting system. 970-974 - M. Deepu Vijay, Ikhlaq Hussain, Bhim Singh, G. Bhuvaneswari:
Energy management and control of SECS and BESS integrated AC microgrid. 975-980 - Patrizio Manganiello, Giovanni Petrone, Marco Giannattasio, Eric Monmasson, Giovanni Spagnuolo:
FPGA implementation of the EIS technique for the on-line diagnosis of fuel-cell systems. 981-986 - Nupur Saxena, Bhim Singh, Anoop Lal Vyas, Ikhlaq Hussain:
Integration of renewable energy with storage system to single phase distribution system. 987-992 - Jorge Segarra-Tamarit, Emilio Pérez, José Carlos Alfonso-Gil, Carlos Ariño, Néstor Aparicio, Hector Beltran:
Optimized management of a residential microgrid using a solar power estimation database. 993-998 - Domingo Biel, Jacquelien M. A. Scherpen:
Passivity-based control of active and reactive power in single-phase PV inverters. 999-1004 - Manuel Räber, Djaffar Ould Abdeslam, Andreas Heinzelmann, Andres Ramirez:
Performance estimation of a cell-to-cell-type active balancing circuit for lithium-ion battery systems. 1005-1010 - Yi Zhang, Huai Wang, Binbin Li, Dianguo Xu, Frede Blaabjerg:
Precharge strategies for isolated modular DC-DC converters under two different start-up conditions. 1011-1016 - Derick F. Pereira, Francisco da Costa Lopes, Edson H. Watanabe:
Prediction of PEMFC stack efficiency using recurrent neural networks. 1017-1022 - Arslan Abbas Rizvi, Hadeed Ahmed Sher, Khaled E. Addoweesh, Abdelrahman El-Leathy, Hany A. Al-Ansary, Kamal Al-Haddad:
Simulation of sun tracking system for point focus fresnel collector. 1023-1028 - Xinyu Zhu, Zaiping Pan:
Study on the influencing factors and mechanism of SSR due to DFIG-based wind turbines to a series compensated transmission system. 1029-1034 - Ricardo Hernandez-Vidal, Hugues Renaudineau, Samir Kouro:
Sub-module photovoltaic microinverter with cascaded flybacks and unfolding H-bridge inverter. 1035-1040 - Yunping Wang, Xiaoming Ji, Xinbo Ruan:
The output property of photovoltaic MS and TCT configurations under partially shaded conditions. 1041-1045 - Nicolas Muller, Hugues Renaudineau, Freddy Flores-Bahamonde, Samir Kouro, Patrick Wheeler:
Ultracapacitor storage enabled global MPPT for photovoltaic central inverters. 1046-1051 - Ivan Zoric, Martin Jones, Emil Levi:
Voltage balancing control of a symmetrical nine-phase machine with series-connected DC links. 1052-1057 - Gerasimos G. Rigatos, Pierluigi Siano, Farouk Zouari, Sul Ademi:
A nonlinear optimal control methoc for autonomous submarines' diving. 1061-1066 - Benjamin P. Jeppesen, Niladri Roy, Livia Moro, Federico Baronti:
An FPGA-based controller for collaborative robotics. 1067-1072 - Sho-Tsung Kao, Yi Wang, Ming-Tzu Ho:
Ball catching with omni-directional wheeled mobile robot and active stereo vision. 1073-1080 - Yu-Dong Zhao, Dong-Eon Kim, Ha-Neul Yoon, Seong Ik Han, Jang-Myung Lee:
Consensus formation control of multiple wheeled mobile robots. 1081-1086 - Rachael L'Orsa, C. J. B. Macnab:
Experimental evaluation of adaptive CMAC haptic control for teleoperation of compliant-joint manipulators. 1087-1092 - Akinori Yabuki, Kiyoshi Ohishi, Toshimasa Miyazaki, Yuki Yokokura:
Fine vibration suppression control based on new two-inertia state observer feedback against three-inertia robot joint. 1093-1098 - Md. Suruz Miah, Jacob Knoll, Aleksander Malinowski:
Heterogeneous multi-robot trajectories for area coverage optimization. 1099-1104 - Ramin Odisho, Weiliang Xu, John E. Bronlund, Marie-Agnes Peyron:
Knowledge-based system for autonomous control of intelligent mastication robots. 1105-1110 - Tooru Suhara, Hiromu Norizuki, Yutaka Uchimura:
Network-based control for a system with long time delay and packet losses. 1111-1116 - Tom Stian Andersen, Raymond Kristiansen:
Path-following in three dimensions using quaternions for a fixed-wing UAV. 1117-1122 - Kenji Ogawa, Kouhei Ohnishi, M. Yousef Ibrahim:
Robust force control with a novel gain tuning methodology based on the stable margin theory. 1123-1128 - Dylan Arnal, Toshiyuki Murakami, Takahiro Nozaki:
Safe tremor suppression through arm movement control. 1129-1134 - Ren C. Luo, Kai Chun Hsieh:
Tapping motion control of dynamic impulse-momentum contact to human body for robotic therapeutical percussive massage. 1135-1140 - Lorena-Elena Hedrea, Claudia-Adina Bojan-Dragos, Radu-Emil Precup, Raul-Cristian Roman, Emil M. Petriu, Ciprian Hedrea:
Tensor product-based model transformation for position control of magnetic levitation systems. 1141-1146 - Ren C. Luo, Po-Kai Tseng:
Trajectory generation and planning for simultaneous 3D printing of multiple objects. 1147-1152 - Luis Claudio Batista da Silva, Ricardo Maroquio Bernardo, Hugo Andrade de Oliveira, Paulo Fernando Ferreira Rosa:
Unmanned aircraft system coordination for persistent surveillance with different priorities. 1153-1158 - Ying Bai, Dali Wang:
Using interval type-2 fuzzy interpolation method to calibrate parallel machine tools. 1159-1166 - Hiroyuki Kano, Hiroyuki Fujioka:
Velocity and acceleration constrained trajectory planning by smoothing splines. 1167-1172 - Jacob Knoll, Kyle Hevrdejs, Aleksander Malinowski, Md. Suruz Miah:
Virtual robot experiments for navigation in structured environments. 1173-1178 - Waqas Ali Khan, Lukasz Wisniewski, Dorota Lang, Jürgen Jasperneite:
Analysis of the requirements for offering industrie 4.0 applications as a cloud service. 1181-1188 - Luis Ribeiro:
Cyber-physical production systems' design challenges. 1189-1194 - Mohammad Elattar, Maxim Friesen, Jürgen Jasperneite:
Evaluation of multipath communication protocols for reliable internet-based cyber-physical systems. 1195-1200 - Lorinc Márton, Tamas Vajda:
Flow control in wireless networked control systems: A dead-beat disturbance observer approach. 1201-1205 - Salvatore Cavalieri, Damiano Di Stefano, Marco Giuseppe Salafia, Marco Stefano Scroppo:
Integration of OPC UA into a web-based platform to enhance interoperability. 1206-1211 - George Davidescu, Thomas Stützle, Valeriy Vyatkin:
Network planning in smart grids via a local search heuristic for spanning forest problems. 1212-1218 - Chen-Wei Yang, Valeriy Vyatkin, Victor Dubinin:
On development of execution model for model transforming distributed substation automation control with ontology. 1219-1225 - Mohammad Elattar, Tong Cao, Verena Wendt, Jürgen Jasperneite, Ansgar Trächtler:
Reliable multipath communication approach for internet-based cyber-physical systems. 1226-1233 - Stefan Feirer, Thilo Sauter:
Seamless handover in industrial WLAN using IEEE 802.11k. 1234-1239 - John Darvill, Alin Tisan, Marcian N. Cirstea:
A novel ANFIS algorithm architecture for FPGA implementation. 1243-1248 - Irfan Ahmad, Banlue Srisuchinwong:
A simple two-transistor 4D chaotic oscillator and its synchronization via active control. 1249-1254 - Hugo Marques, Luís Gomes, Anikó Costa:
Emulation of electronic instrumentation devices supporting sailboat's autonomous navigation. 1255-1260 - Naoki Fujieda, Shuichi Ichikawa, Yoshiki Ishigaki, Tasuku Tanaka:
Evaluation of the hardwired sequence control system generated by high-level synthesis. 1261-1267 - G. Vicidomini, Giovanni Petrone, Eric Monmasson, Giovanni Spagnuolo:
FPGA based implementation of a sliding-mode observer for battery state of charge estimation. 1268-1273 - Roberto Fernandez Molanes, Martin Garaj, Wallace K. S. Tang, Juan J. Rodríguez-Andina, José Fariña, Kim Fung Tsang, Kim-Fung Man:
Implementation of Particle Swarm Optimization in FPSoC devices. 1274-1279 - Aditya Bhattacharya, Abhishek Sehgal, Nasser Kehtarnavaz:
Low-latency smartphone app for real-time noise reduction of noisy speech signals. 1280-1284 - Abhishek Sehgal, Fatemeh Saki, Nasser Kehtarnavaz:
Real-time implementation of voice activity detector on ARM embedded processor of smartphones. 1285-1290 - Sarah Azimi, Annarita Moramarco, Luca Sterpone:
Reliability evaluation of heterogeneous systems-on-chip for automotive ECUs. 1291-1296 - Premysl Houdek, Michal Sojka, Zdenek Hanzálek:
Towards predictable execution model on ARM-based heterogeneous platforms. 1297-1302 - Xiqun Lu, Zhixiang Yang:
A nonlinear background updating scheme. 1305-1310 - Shabnam Sadeghi Esfahlani, Silvia Cirstea, Alireza Sanaei, George Wilson:
An adaptive self-organizing fuzzy logic controller in a serious game for motor impairment rehabilitation. 1311-1318 - Jiayun Yang, Guojin Ma, Mingyu Gao, Zhiwei He:
Battery grouping with time series clustering based on features. 1319-1323 - Milena F. Pinto, Aurelio G. Melo, André Luís Marques Marcato, Cristina Urdiales:
Case-based reasoning approach applied to surveillance system using an autonomous unmanned aerial vehicle. 1324-1329 - Tatsuya Yamazaki, Nobuyuki Hasebe, Sota Shimizu:
Considerations about saliency map from Wide Angle Fovea image. 1330-1335 - Masahiro Yoshida, Tomoya Imanishi, Hiroaki Nishi:
Feature extraction and background information detection method using power demand. 1336-1341 - Neha Dawar, Chen Chen, Roozbeh Jafari, Nasser Kehtarnavaz:
Real-time continuous action detection and recognition using depth images and inertial signals. 1342-1347 - Jeferson de Oliveira Batista, Rodrigo Biancardi Rodrigues, Flávio Miguel Varejão:
Soft computing classifier ensemble for fault diagnosis. 1348-1353 - Shrawan Jha, Igor Bello:
A GaN HFET sensor for respiration monitoring. 1357-1361 - Matteo Nardello, Maurizio Rossi, Davide Brunelli:
A low-cost smart sensor for non intrusive load monitoring applications. 1362-1368 - Alan Dahgwo Yein, Chih-Hsueh Lin, Wen-Shyong Hsieh:
A secure mutual trust scheme for wireless sensor networks. 1369-1375 - Jamie Blanche, David Flynn, Helen Lewis, Gary D. Couples, Rebecca Cheung:
Analysis of geomaterials using frequency modulated continuous wave radar in the X-band. 1376-1381 - Christos Stergiou, Kostas E. Psannis, Andreas P. Plageras, George Kokkonis, Yutaka Ishibashi:
Architecture for security monitoring in IoT environments. 1382-1385 - Daisuke Okumura, Sho Sakaino, Toshiaki Tsuji:
Development of a multistage six-axis force sensor with a high dynamic range. 1386-1391 - Tobias König, Thomas Greiner, Achim Zern, Zoltán Kántor, Attila Szabó:
Introducing a new method for temperature measurement by magnetostrictive position sensors. 1392-1397 - Majid Borairi, Majeed Soufian:
Optimal actuator\sensor placement and controller design for large flexible space structures and robotics. 1398-1403 - Manus P. Henry, Oleg Yu. Bushuev, Olga L. Ibryaeva:
Prism signal processing for sensor condition monitoring. 1404-1411 - Shrawan Jha, Xu-Hua Wang, Hendrik Faber:
Touch sensor application of spray deposited ZnO films. 1412-1416 - David Fernandes, Luís Gomes, Anikó Costa:
Wind speed and direction measurement based on time of flight ultrasonic anemometer. 1417-1422 - Chandan Chakraborty, Saptarshi Basak, Yalla Tirumala Rao:
A new series of brushless and permanent magnetless synchronous machines. 1425-1430 - Andrew Hopkins, Neville McNeill, William D. Drury, Andrew Atkins:
Deploying SiC BJTs in an 800-V switched-mode power supply for hybrid & electric vehicles. 1431-1438 - Mariana-Eugenia Ilas:
Parameter selection for efficient HOG-based car detection. 1439-1444 - David Cabezuelo, Jon Andreu, Iñigo Kortabarria, Iñigo Martínez de Alegría, Endika Robles:
Powertrain systems of electric, hybrid and fuel-cell vehicles: State of the technology. 1445-1450 - Youngho Park, Chul Sur, Si-Wan Noh, Kyung-Hyune Rhee:
Secure vehicle location-sharing for trajectory-based message delivery on VANETs. 1451-1456 - Leander Behre, Theo Van Niekerk, Paolo Mercorelli, Oleg Yu. Sergiyenko, Lars Lindner, Julio C. Rodríguez-Quiñonez:
Structure and dynamics laboratory testing of an indirectly controlled full variable valve train for camless engines. 1457-1462 - Usman Habib, Gerhard Zucker:
Automatic occupancy prediction using unsupervised learning in buildings data. 1471-1476 - Anita Martincevic, Filip Rukavina, Vinko Lesic, Mario Vasak:
Comfort control in buildings with adherence to the required thermal energy input in zones. 1477-1482 - Kasun Amarasinghe, Daniel L. Marino, Milos Manic:
Deep neural networks for energy load forecasting. 1483-1488 - Lukas Krammer, Daniel Lechner, Felix Knorr, Stephan Cejka:
Easy provisioning of building automation systems using visual light communication. 1489-1494 - Antonio Martin-Montes, Mauricio Burbano, Carlos León:
Efficient services in the industry 4.0 and intelligent management network. 1495-1500 - Cristina Guzman, Alben Cardenas, Kodjo Agbossou:
Evaluation of meta-heuristic optimization methods for home energy management applications. 1501-1506 - Florian Wenig, Peter Klanatsky, Christian Heschl, Cristinel Mateis, Dejan Nickovic:
Exponential pattern recognition for deriving air change rates from CO2 data. 1507-1512 - Zheming Guan, Changyun Wen:
Further optimization on Type II terminal unit in active chilled beam system. 1513-1520 - Tiilio P. Vieira, Paulo E. M. de Almeida, Magali R. G. Meireles:
Intelligent fault management system for wireless sensor networks with reduction of power consumption. 1521-1527 - Andreas Fernbach, Wolfgang Kastner:
Semi-automated engineering in building automation systems and management integration. 1528-1534 - Tomoya Imanishi, Masahiro Yoshida, Janaka Wijekoon, Hiroaki Nishi:
Time-series decomposition of power demand data to extract uncertain features. 1535-1540 - Matthias Lehmann, Jorg Andreas, Tuan Linh Mai, Klaus Kabitzsch:
Towards a comprehensive life cycle approach of building automation systems. 1541-1547 - Gholamhossein Shirkoohi:
Determination of the demagnetisation of electrical steel strips. 1551-1554 - Vicente Leite:
Innovative learning in engineering education: Experimenting with short-term project-oriented research and project-based learning. 1555-1560 - Carlos Fortunato, V. Fernão Pires, João F. A. Martins:
Teaching distribution network protection through the support of a software tool. 1561-1566 - Yul Y. Nazaruddin, Antony Siahaan:
Teaching intelligent control using a laboratory-scaled process mini-plant. 1567-1572 - Andrés Iborra, Pedro Sánchez, Juan Angel Pastor, Diego Alonso, Tanya Suarez:
Beyond traditional entrepreneurship education in engineering promoting IoT start-ups from universities. 1575-1580 - Diego Alonso, Juan Angel Pastor, Bárbara Álvarez, Tanya Suarez, Igor Tasic:
Improving the learning experience and outcomes in entrepreneurial courses. 1581-1586 - Moises J. Castro-Toscano, Julio C. Rodríguez-Quiñonez, Daniel Hernández-Balbuena, Lars Lindner, Oleg Sergiyenko, Moises Rivas-López, Wendy Flores-Fuentes:
A methodological use of inertial navigation systems for strapdown navigation task. 1589-1595 - Jian-He Shi, Huei-Yung Lin:
A vision system for traffic sign detection and recognition. 1596-1601 - Oscar Real-Moreno, Julio C. Rodríguez-Quiñonez, Oleg Sergiyenko, Luis C. Basaca-Preciado, Daniel Hernández-Balbuena, Moises Rivas-López, Wendy Flores-Fuentes:
Accuracy improvement in 3D laser scanner based on dynamic triangulation for autonomous navigation system. 1602-1608 - Sarah Wunderlich, Johannes Schmölz, Kolja Kühnlenz:
Follow me: A simple approach for person identification and tracking. 1609-1614 - Lars Lindner, Oleg Sergiyenko, Moises Rivas-López, Mykhailo Ivanov, Julio C. Rodríguez-Quiñonez, Daniel Hernández-Balbuena, Wendy Flores-Fuentes, Vera Tyrsa, Fabian Natanael Murrieta-Rico, Paolo Mercorelli:
Machine vision system errors for unmanned aerial vehicle navigation. 1615-1620 - Monica Valenzuela-Delgado, Wendy Flores-Fuentes, Miguel Enrique Bravo-Zanoguera, Alejandro S. Ortiz-Perez, Daniel Hernández-Balbuena, Moises Rivas-López, Oleg Sergiyenko, Félix F. González-Navarro:
Machine vision system to measuring the velocity field in a fluid by Particle Image Velocimetry: Special Case of Magnetohydrodynamics. 1621-1625 - Lucas Woltmann, Rune Dalmo, Raymond Kristiansen:
Multi-source data collection for state-of-the-art data analysis from ground-proximate images in sea ice classification. 1626-1630 - Alexei A. Morozov, Olga S. Sushkova, Alexander F. Polupanov:
Object-oriented logic programming of 3D intelligent video surveillance: The problem statement. 1631-1636 - Ajmal Shahbaz, Danilo Cáceres Hernández, Kang-Hyun Jo:
Optimal color space based probabilistic foreground detector for video surveillance systems. 1637-1641 - Paolo Mercorelli, Thomas Voß, Daniel Strassberger, Oleg Sergiyenko, Lars Lindner:
Optimal trajectory generation using MPC in robotino and its implementation with ROS system. 1642-1647 - Wendy Flores-Fuentes, Daniel Hernández-Balbuena, Julio C. Rodríguez-Quiñonez, Moises Rivas-López, Oleg Sergiyenko, Lars Lindner, Félix F. González-Navarro, Jesús Elías Miranda-Vega:
Virtual angle measurement through an FPGA data processing. 1648-1653 - Morcos Metry, Yushan Liu, Robert S. Balog, Haitham Abu-Rub:
Model predictive control for maximum power point tracking of quasi-Z-source inverter based grid-tied photovoltaic power system. 1657-1662 - Maoxing Li, Yushan Liu, Haitham Abu-Rub:
Optimizing control strategy of quasi-Z source indirect matrix converter for induction motor drives. 1663-1668 - Yi Li, Yushan Liu, Haitham Abu-Rub:
PWAM controlled quasi-Z source motor drive. 1669-1675 - Piotr Majtczak, Jacek Rabkowski:
Symmetrical switching patterns and an adaptive modulator for three-phase quasi-Z-source inverters. 1676-1681 - A. Kanaan, Fadia Sebaaly, Hadi Youssef Kanaan:
MPC based on balanced positive-sequence extraction strategy for grid-tied converter control. 1685-1691 - Fadia Sebaaly, Hadi Youssef Kanaan:
New voltage vector generation method for a MPC algorithm with constant switching frequency operation. 1692-1698 - Priyanwada Nimesha Wijesooriya, Nihal Kularatna, Jayathu Fernando, D. Alistair Steyn-Ross:
Series transistor array-based linear AC regulator: Role of multiple buck-boost transformers in efficiency improvements. 1699-1704 - Jeremy Pitt, Ada Diaconescu, Aikaterini Bourazeri:
Democratisation of the SmartGrid and the active participation of prosumers. 1707-1714 - Fabrizio Sossan, Konstantina Christakou, Mario Paolone, Xiang Gao, Marco Liserre:
Enhancing the provision of ancillary services from storage systems using smart transformer and smart meters. 1715-1720 - Vasco Delgado-Gomes, João F. A. Martins, Celson Lima, Paul Nicolae Borza:
Towards the use of Unbundle Smart Meter for advanced inverters integration. 1721-1724 - Emilio J. Palacios-García, Enrique Rodriguez-Diaz, Amjad Anvari-Moghaddam, Mehdi Savaghebi, Juan C. Vasquez, Josep M. Guerrero, Antonio Moreno-Muñoz:
Using smart meters data for energy management operations and power quality monitoring in a microgrid. 1725-1731 - Kinga Somlo, Gabor Sziebig:
Future role of application of new technologies in small-and medium scale manufacturing systems: Regarding Intelligent and advanced manufacturing systems in northern peripheral area. 1735-1740 - Yuki Nagatsu, Seiichiro Katsura:
Kalman filter based equivalent elastic force feedback for time-delay compensation. 1741-1746 - Yasuharu Kunii, Gábor Kovács, Naoaki Hoshi:
Mobile robot navigation in natural environments using robust object tracking. 1747-1752 - Gabor Sziebig, Péter Korondi:
Remote operation and assistance in human robot interactions with vibrotactile feedback. 1753-1758 - Csongor Márk Horváth, Péter Korondi, Trygve Thomessen:
Robotized multi-pass Tungsten Inner Gas welding of Francis hydro power turbines. 1759-1765 - V. Fernão Pires, João F. A. Martins, Carlos Roncero-Clemente, Enrique Romero-Cadaval, Oleksandr Husev:
Controlling a battery energy storage system to support residential photovoltaic installations. 1769-1774 - Dmitri Vinnikov, Andrii Chub, Elizaveta Liivik:
Multiphase galvanically isolated impedance-source DC-DC converter for residential renewable energy applications. 1775-1780 - Vitor Fernão Pires, Daniel Foito, Armando Cordeiro, João F. A. Martins:
PV generators combined with UPQC based on a dual converter structure. 1781-1786 - Indrek Roasto, Tanel Jalakas, Argo Rosin:
Startup sequence for a grid connected single phase voltage source inverter. 1787-1791 - Aurora Gil de Castro, Antonio Moreno-Muñoz, Joaquin Garrido, Sarah K. Rönnberg, Emilio J. Palacios-García, Tomas Morales:
Supraharmonics reduction in NPC inverter with random PWM. 1792-1797 - Mahmood Alwash, Mark R. Sweet, Ekkanath Madathil Shankara Narayanan:
Analysis of voltage source converters under DC line-to-line short-circuit fault conditions. 1801-1806 - Francisco de Assis Boldt, Thomas Walter Rauber, Thiago Oliveira-Santos, Alexandre Rodrigues, Flávio Miguel Varejão, Marcos Pellegrini Ribeiro:
Binary feature selection classifier ensemble for fault diagnosis of submersible motor pump. 1807-1812 - Ting-Chi Yeh, Min-Chun Pan, Cheng-Yi Ho:
DSP-base adaptive angular-velocity VKF order tracking for online real-time monitoring system. 1813-1819 - Majid Borairi, Majeed Soufian, D. L. Yu:
Fault detection observer of a pilot plant papermaking machine. 1820-1824 - Grzegorz Tarchala, Piotr Sobanski, Teresa Orlowska-Kowalska:
Fault tolerant sliding mode direct torque control of induction motor with inverter reconfiguration. 1825-1831 - Piotr Sobanski, Teresa Orlowska-Kowalska:
IGBT open-circuit fault diagnosis based on the voltage estimation in the line-side AC/DC converter. 1832-1836 - Jaka Marguc, Mitja Truntic, Miran Rodic, Miro Milanovic:
Modelling of power electronics converters by using the incidence matrix approach. 1837-1842 - Jörg Kammermann, Igor Bolvashenkov, Stefan Schwimmbeck, Hans-Georg Herzog:
Reliability of induction machines: Statistics, tendencies, and perspectives. 1843-1847 - Giampaolo Buticchi, Levy Ferreira Costa, Marco Liserre:
A quadraple active bridge electrical power distribution system for the more electric aircraft. 1851-1855 - Francesco Giuliani, Giampaolo Buticchi, Marco Liserre, Nicola Delmonte, Paolo Cova, Nicola Pignoloni:
GaN-based triple active bridge for avionic application. 1856-1860 - Jiawei Chen, Chengjun Wang, Jie Chen:
Investigation on the selection of a more suitable power system architecture for future more electric aircraft from the prospective of system stability. 1861-1867 - Elisabetta Bongermino, Fabio Mastrorocco, Michele Tomaselli, Vito Giuseppe Monopoli, David Naso:
Model and energy management system for a parallel hybrid electric unmanned aerial vehicle. 1868-1873 - Giampaolo Buticchi, Levy Ferreira Costa, Marco Liserre:
Resilient multi-bus distribution in more electric aircraft by means of dual active bridges. 1874-1878 - Tharmini Janarthanan, Shahrzad Zargari:
Feature selection in UNSW-NB15 and KDDCUP'99 datasets. 1881-1886 - Majeed Soufian:
Towards self-defending control systems in cybersecurity analysis and measures in industrial automation systems. 1887-1892 - Gerasimos G. Rigatos, Pierluigi Siano, Sul Ademi, Patrice Wira, Maria Carmen Falvo:
A nonlinear H-infinity approach to optimal control of PEM fuel cells. 1895-1900 - Liancheng Zhu, Fengge Zhang, Shi Jin, Siyang Yu, Sul Ademi, Wenping Cao:
A novel direct power control for open-winding brushless doubly-fed reluctance generators fed by dual two-level converters using a common DC bus. 1901-1906 - Gerasimos G. Rigatos, Demetrios Serpanos, Nikolaos A. Zervos, Pierluigi Siano:
Distributed filtering and local statistical approach to fault diagnosis for securing the power gric. 1907-1912 - Gerasimos G. Rigatos, Pierluigi Siano, Sul Ademi:
Flatness-based adaptive fuzzy control of brushless doubly-fed reluctance machines. 1913-1920 - Gerasimos G. Rigatos, Demetrios Serpanos, Nikolaos A. Zervos, Pierluigi Siano:
Kalman filtering and statistical decision making for detection of attacks against power grid sensors. 1921-1926 - R. M. Maheshi Ruwanthika, A. M. Harsha S. Abeykoon, Seiichiro Katsura:
Bilateral control with compliant force lock for safety enhancement. 1929-1934 - Phi Van Lam, Yasutaka Fujimoto:
Completed hardware design and controller of the robotic cane using the inverted pendulum for walking assistance. 1935-1940 - Hiroki Kurumatani, Seiichiro Katsura:
GaN-HEMT-based three level T-type NPC inverter using reverse-conducting mode in rectifying. 1941-1946 - Thao Tran Phuong, Kiyoshi Ohishi, Yuki Yokokura:
Kalman filter based fine force sensation with periodic component extraction. 1947-1952 - Kouta Yokoyama, Tomoyuki Shimono, Takahiro Mizoguchi, Andrea Zignoli, Kouhei Ohnishi:
Variable compliance control for transfer support robot. 1953-1958 - Martin Hrabina:
Analysis of linear predictive coefficients for gunshot detection based on neural networks. 1961-1965 - Rudolf Mecke:
Efficient induction motor drive with multilevel inverter and variable rotor flux. 1969-1974 - Yandong Wang, He Yin, Songyang Han, Amro Alsabbagh, Chengbin Ma:
A novel switched capacitor circuit for battery cell balancing speed improvement. 1977-1982 - Sho Takagawa, Daisuke Chugo, Satoshi Muramatsu, Hiroshi Hashimoto:
Control method of a personal vehicle on cooperation movement with a companion: Second report: Inducing its companion to take a suitable path for cooperative movement. 1985-1990 - Suvodip Chakraborty, Anirban Dasgupta, Punyashlok Dash, Aurobinda Routray:
Development of a wireless wearable electrooculogram recorder for IoT based applications. 1991-1995 - Marie-Pierre Pacaux-Lemoine, Lydia Habib, Guillaume Tartare, Ludovic Koehl, Xianyi Zeng:
Human-robots cooperation through intelligent garment. 1996-2001 - Yihsin Ho, Eri Sato-Shimokawara, Toru Yamaguchi, Norio Tagawa:
Robots for older adults: According to useras required. 2002-2007 - Kazushige Ashimori, Hiroshi Igarashi:
Skill assist system for musical instruments by skilled players force feedback. 2008-2013 - Oliver Ozioko, William Taube Navaraj, Marion A. Hersh, Ravinder Dahiya:
SmartFingerBraille: A tactile sensing and actuation based communication glove for deafblind people. 2014-2018 - Christiaan M. Fourie, Deep Vardhan Bhatt, Bruno J. Silva, Anuj Kumar, Gerhard P. Hancke:
A solar-powered fish pond management system for fish farming conservation. 2021-2026 - Stefan Oniga, Alin Tisan, Robert Bolyi:
Activity and health status monitoring system. 2027-2031 - M. Lucas Phaswana, Gerhard P. Hancke, T. D. Ramotsoela:
Autonomous monitoring system for a public residential street. 2032-2037 - Lavinia Mihaela Dinca, Gerhard P. Hancke:
Behavioural sensor data as randomness source for IoT devices. 2038-2043 - César Veiga, Daniel Rivera, Abraham Paz, Diego Castineira, José Fariña, Juan J. Rodríguez-Andina, Enrique García, Andrés Íñiguez:
Optimized PPG-based wearable acquisition unit for massive analysis of heart rhythms. 2044-2049 - Jeannette Chin, Vic Callaghan, Ivan Lam:
Understanding and personalising smart city services using machine learning, The Internet-of-Things and Big Data. 2050-2055 - Daniel Rivera, César Veiga, Juan J. Rodríguez-Andina, José Fariña, Enrique García:
Using support vector machines for atrial fibrillation screening. 2056-2060 - Songyang Han, He Yin, Amro Alsabbagh, Chengbin Ma:
A flexible distributed approach to energy management of an isolated microgrid. 2063-2068 - Mario Mureddu, Alfonso Damiano:
A statistical approach for resilience analysis of ESS deployment in RES-based power systems. 2069-2074 - Cong-Sheng Huang, Tommy Wai-Shing Chow, Mo-Yuen Chow:
Li-ion battery parameter identification with low pass filter for measurement noise rejection. 2075-2080 - Jiadong Lu, Jinglin Liu, Yihua Hu, Kai Ni, Sen Song:
Three-phase four-switch inverter fed IPMSM initial position estimation based on HF method. 2081-2085 - Shoubhik Gupta, Anastasios Vilouras, Hadi Heidari, Ravinder Dahiya:
Device modelling of silicon based high-performance flexible electronics. 2089-2092 - Wenting Dang, Leandro Lorenzelli, Vincenzo Vinciguerra, Ravinder Dahiya:
Hybrid structure of stretchable interconnect for reliable E-skin application. 2093-2096 - Paolo Branchini, Andrea Fabbh, Domenico Riondino, Luigi Mariucci, Matteo Rapisarda, Antonio Valletta, Alberto Aloisio, Francesco Di Capua:
Logic gates and memory elements design and simulation using PMOS organic transistor. 2097-2101 - Dhayalan Shakthivel, Fengyuan Liu, Carlos Garcia-Núñez, William Taube Navaraj, Ravinder S. Dahiya:
Nanomaterials processing for flexible electronics. 2102-2106 - Radu Etz, Dorin Petreus, Toma Patarau, Eniko Lazar:
An islanded renewable energy microgrid emulator for geothermal, biogas, photovoltaic and lead acid battery storage. 2109-2114 - Rafael Sebastián, Rafael Pena-Alzola, Jeronimo Quesada:
Simulation of a wind diesel power system with flywheel energy storage. 2115-2120 - Ahmed Fares, Christian Klumpner, Mark Sumner:
Investigating the benefits and limitations of cascaded converter topologies used in modular battery systems. 2123-2130 - Jernej Cernelic, Robert Brezovnik, Jozef Ritonja, Drago Dolinar, Martin Petrun:
Optimal operating point of medium frequency resistance spot welding systems. 2131-2137
a service of 
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-09-05 01:02 CEST by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by:
