Ultra Wide Band Electromagnetic Shielding Through a Simple Single Layer Frequency Selective Surface
Pages 2769 - 2783
Abstract
Due to enormous increase of electromagnetic radiation emitted from proliferating radiating sources, precautionary approaches should be taken to minimize the resultant electromagnetic interference (EMI). Recognized as an effective countermeasure, electromagnetic shielding (EMS) structures are possible solutions for EMI cancellation. In this paper, a new filtering design is proposed with the aim of ultra-wide band EMS achievement and high signal attenuation. The proposed configuration, as a frequency selective surface, is composed of simple elements on both top and bottom layers of the substrate which exhibits 11.4 GHz ultra-wide stop band from 4.6 to 16 GHz. Moreover, in the aforementioned frequency bands, ultra-wide band shielding effectiveness with more than 20 dB attenuation is obtained as a more remarkable merit. The proposed design is a compact, simple, and suitable choice in shielding applications of ultra-wide frequency bands.
References
[1]
Munk, B. A. (2000). Frequency selective surface: Theory and design (1st ed.). New York, NY: Wiley-Interscience.
[2]
Chakravarty, S., & Mittra, R. (2002). Application of the micro-genetic algorithm to the design of spatial filters with frequency-selective surfaces embedded in dielectric media. IEEE Transactions on Electromagnetic Compatibility,44(2), 338---346.
[3]
Zhou, H., Qu, Sh, Lin, B., Wang, J., Ma, H., Xu, Zh, et al. (2012). Filter-antenna consisting of conical FSS radome and monopole antenna. IEEE Transactions on Antennas and Propagation,60(6), 3040---3045.
[4]
Zahir Joozdani, M., Khalaj Amirhosseini, M., & Abdolali, A. (2016). Wideband radar cross-section reduction of patch array antenna with miniaturised hexagonal loop frequency selective surface. Electronics Letters,52(9), 767---768.
[5]
Li, Y., Zhang, K., Yang, L., & Du, L. (2016). Wide-band radar cross-section reduction for antenna using frequency selective absorber. Electronics Letters,52(21), 1809---1811.
[6]
Martinez-Lopez, L., Rodriguez-Cuevas, J., Martinez-Lopez, J. I., & Martynyuk, A. E. (2014). A multilayer circular polarizer based on bisected split-ring frequency selective surfaces. IEEE Antennas and Wireless Propagation Letters,13, 153---156.
[7]
Zhu, X-C., Hong, W., Wu, K., Tang, H.-J., Hao, Zh-Ch., Chen, J.-X., et al. (2014). Design of a bandwidth-enhanced polarization rotating frequency selective surface. IEEE Transactions on Antennas and Propagation,62(2), 940---944.
[8]
Sakran, F., Neve-Oz, Y., Ron, A., Golosovsky, M., Davidov, D., & Frenkel, A. (2008). Absorbing frequency-selective-surface for the mm-wave range. IEEE Transactions on Antennas and Propagation,56(8), 2649---2655.
[9]
Edalati, A., & Denidni, T. A. (2013). Frequency selective surfaces for beam-switching applications". IEEE Transactions on Antennas and Propagation,61(1), 195---200.
[10]
Liang, B., Sanz-Izquierdo, B., Parker, E. A., & Batchelor, J. C. (2015). Cylindrical slot FSS configuration for beam-switching applications. IEEE Transactions on Antennas and Propagation,63(1), 166---173.
[11]
Bouslama, M., Traii, M., Denidni, T. A., & Gharsallah, A. (2016). Beam-switching antenna with a new reconfigurable frequency selective surface. IEEE Antennas and Wireless Propagation Letters,15, 1159---1162.
[12]
Chiu, C-N, Chang, Y-C., Hsieh, H-C., & Chen, C. H. (2010). Suppression of spurious emission from a spiral inductor through the use of a frequency selective surface. IEEE Transactions on Electromagnetic Compatibility,52(1), 56---63.
[13]
Chiu, C-N, & Huang, K-C. (2011). Harmonization of a bandpass shielding enclosure and its internal antenna. IEEE Transactions on Electromagnetic Compatibility,53(3), 853---858.
[14]
Chiu, C-N, Kuo, C-H, & Lin, M-S. (2008). Bandpass shielding enclosure design using multipole-slot arrays for modern portable digital devices. IEEE Transactions on Electromagnetic Compatibility,50(4), 895---904.
[15]
Syed, I. S., Ranga, Y., Matekovits, L., Esselle, K. P., & Hay, S. G. (2014). A single-layer frequency-selective surface for ultrawideband electromagnetic shielding. IEEE Transactions on Electromagnetic Compatibility,56(6), 1404---1411.
[16]
Baisakhiya, S., Sivasamy, R., Kanagasabai, M., & Periaswamy, S. (2013). Novel compact UWB frequency selective surface for angular and polarization independent operation. Progress in electromagnetic research letters.,40, 71---79.
[17]
Sen, G., Mahato, S., Mandal, T., Mondal, S., Majumdar, S., & Sarkar, P. P. (2012). Design of a wide band frequency selective surface (FSS) for multiband operation of reflector antenna. In 5th International conference on computers and devices for communication (CODEC) (pp. 1---3).
[18]
Moharamzadeh, E., & Maleki Javan, A. (2013). Triple-band frequency-selective surfaces to enhance gain of X-band triangle slot antenna. IEEE Antennas and Wireless Propagation Letters,12, 1145---1148.
[19]
Guan, F., Xiao, H., Shi, M., & Wang, F. (2015). The novel frequency selective fabric and application research. Journal of Industrial Textile, 46 143---159.
[20]
Ranga, Y., Matekovits, L., Weil, A. R., & Esselle, K. P. (2013). A low-profile dual-layer ultra-wideband frequency selective surface reflector. Microwave and Optical Technology Letters,55(6), 1223---1227.
[21]
Huang, H.-F., Zhang, Sh.-F., & Hu, Y. H. (2013). A novel frequency selective surface for ultra wideband antenna performance improvement. In Proceedings of the international symposium on antennas & propagation (ISAP) (pp. 965---968).
[22]
Langley, R. J., & Parker, E. A. (1982). Equivalent circuit model for arrays of square loops. Electronics Letters,18(7), 294---296.
Index Terms
- Ultra Wide Band Electromagnetic Shielding Through a Simple Single Layer Frequency Selective Surface
Index terms have been assigned to the content through auto-classification.
Recommendations
Design of Azimuthally Periodic Wedge-Shaped Circular Ring Bandpass Frequency Selective Surface Using Transmission-Line Method
In this paper, an azimuthally periodic wedge-shaped circular aperture frequency selective surface (FSS) is discussed, which provides the dual polarized and angular stable frequency response with significantly more fractional bandwidth (FBW) up to 50° ...
Miniaturized Single Layer Ultra Wide Band (UWB) Patch Antenna Using a Partial Ground Plane
A wide-band -shaped antenna on a partial ground plane is proposed and is experimentally investigated for Ultra Wide Band applications. A rectangular shape is modified to shape on a partial ground plane and is optimized (length and width of slots) for ...
A novel multi-band frequency selective surface for ka-band applications
ICTRS '18: Proceedings of the Seventh International Conference on Telecommunications and Remote SensingIn this paper, single layer multi-band reflective frequency selective surface (FSS) design is presented. Proposed design have stable frequency response up to 60 degrees of incidence angles. In the proposed hybrid design, three-armed geometry is placed ...
Comments
Information & Contributors
Information
Published In
Copyright © Copyright © 2017 Springer Science+Business Media, LLC.
Publisher
Kluwer Academic Publishers
United States
Publication History
Published: 01 August 2017
Author Tags
Qualifiers
- Article
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 0Total Downloads
- Downloads (Last 12 months)0
- Downloads (Last 6 weeks)0
Reflects downloads up to 03 Sep 2024
Other Metrics
Citations
View Options
View options
Get Access
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign in