AT-5555PLUS

AT-5555PLUS/N
10 METER RADIO
Instruction Manual
CONGRATULATIONS FOR YOUR CHOICE!!!
The ANYTONE brand has always wanted to identify itself with a highly technological profile, applying the most modern
and efficient design criteria with expertise. The aim of all this is to offer innovative, exclusive and efficient solutions.
The new AT-5555PLUS and AT-5555PLUS / N models are the latest results of what has been written: they ensure
you exceptional performance for comfortable use, reliable operation and exciting horizons. The skilful use of the SMT
technology guarantees you the best stability, reliability and unprecedented quality. Your multimode AT-5555PLUS radio
is a further step in amateur radio telecommunications: it is certainly the most appropriate partner for the exceptionally
demanding users. In addition, the multi-ports connection available in the device make it ready for easy upgrades and
related function extensions. To ensure optimal use of the radio, we recommend that you read this user manual carefully
before installing and activating the device.
 CONTENTS

FUNCTIONS & FEATURES................................................................................................................................................................1

WARNING...........................................................................................................................................................................................1

RESET FUNCTION (Resume Factory Default)................................................................................................................................1

INSTALLATION...................................................................................................................................................................................2

HOW TO USE YOUR RADIO.............................................................................................................................................................4

FUNCTION MENU SETUP.................................................................................................................................................................9

SPECIFICATIONS...............................................................................................................................................................................12

EU Declaration of Conformity..........................................................................................................................................................13
FUNCTIONS & FEATURES 25. Key-Lock Function
1. Large LCD panel which displays frequency and all kinds of 26. VOX function
information 27. CTCSS/DCS code
2. DUAL-DIGITAL TUBE FOR CHANNEL DISPLAY 28. RX compander: noise blanker
3. USE EL technology for backlight 29. Noise gate setting: mic noise adjustable
4. PA、CW、AM、FM、USB、LSB mode 30. RX Noise Reduction (only AT-5555PLUS/N)
5. A、B、C、D、E、F , 6 banks in total, where 60 channels at least 31. Compatible with “electronic” and “dynamic” MIC type
can be individually programmed.
6. Frequency Tuning Step can be 10Hz, 100Hz, 1KHz, 5KHz or
WARNING
To use the radio, please connect the antenna to the jack "B" on the back
10KHz.
panel of the equipment firstly and then measure the SWR (Standing
7. Multiple CLARIFIER Operating Modes Wave Ratio) before transmitting (at this subject read the chapter nr.5/
8. Flexible menu functions and PC programming software to meet page 3). A badly tuned antenna can destroy the final TX amplifier, these
varied customer demands components are NOT covered under warranty.
9. ECHO Function
10. SQ, ASQ Function (FM and AM mode only) RESET FUNCTION (Resume Factory Default) 1
11. RF GAIN ADJUSTMENT This Radio offers the RESET FUNCTION to prevent and solve accidental
12. RF PWR ADJUSTMENT upgrading, as well as provides a solution for customers who changed or
activated unconsciously some unwanted function: the resuming of the
13. SCAN FUNCTION original “factory setting” is easy and instantly.
14. RB FUNCTION
How to Operate:
15. NB/ANL FUNCTION
Step 1: Power off the radio.
16. DW DUAL-WATCH FUNCTION
Step 2: Press and hold FUNC and SCAN keys at the same time,
17. BEEP VOICE PROMPT
followed by powering on the radio.
18. +10KHz Function
Step3: Release the two keys when LCD displays "RES".
19. SWR、S/RF、DC Voltage display function
All former settings would be replaced by Factory Default value when
20. TOT function LCD displays "REND" .
21. HI-CUT FUNCTION WARNING: All former settings would be replaced by Factory Default
22. EMG CALL value after operating the RESET FUNCTION.
23. SWR PROTECTION INSTALLATION
24. POWER SUPPLIED VOLTAGE PROTACTION
 1. WHERE AND HOW TO MOUNT YOUR RADIO a) Antenna selection:
For the best signal radiation, a well-calibrated antenna length is
a)It is important to identify the proper place of the installation by
very important, on the other hand, there are other factors to be
considering "key criteria", such as easy access and congenial considered: the size of the vehicle and its usual speed. For this
spaces with freedom of movement. subject you can recall for the support and patronage of your dealer.
b)The radio must not compromise the comfort of either: the driver and b) Mobile antenna:
the passengers.
-Must be fixed to the vehicle where there is a maximum of metallic
c) Remember to provide cables in harmony with safety and prevention surface(ground plane) , away from windscreen mountings.
"standards". As well as guides their wiring in protected channels
-There are two types of antenna: Pre-Regulated Antenna which
(eg: power supply, antenna, accessory wiring), so that they do not should be used on a good ground plane (e.g. car roof or lid of the
interfere in any way with the driving of vehicles. boot), and Adjustable Antenna which offer a much wider frequency
d)To install your equipment, use the bracket (1) and the self-tapping range and can be used over a smaller ground plane.
screws [2] provided (drilling diameter 5 mm). Be careful not to For an antenna which must be fixed by drilling, you will need a
damage the vehicle's electrical system when drilling the dashboard. good contact between the antenna and the ground plane. To obtain
e)Do not forget to insert the rubber joints [3] between the radio and this, you should lightly scratch the surface where the screw and
its bracket as they have a cushioning effect that allows a delicate tightening star are to be placed.
orientation and tightening of the device. -Be careful not to pinch or flatten the coaxial cable (as this runs the
f)Choose where to place the microphone holder and remember risk of break down and/or short circuiting).
2 that the microphone cable must extend to the driver without -Connect the antenna to location (B).
interfering with the vehicle's controls. c) Fixed antenna:
2. ANTENNA INSTALLATION
A fixed antenna should be installed in a predominant area, possibly emerging
over the entire surrounding topography, including the canopies of trees.
Normally the antenna is raised up and fixed on the top of a mast. In some
areas, especially urban ones, it may be necessary to observe the regulations
in force in the specific region. In order to avoid unnecessary inconvenience, it
is advisable to check this matter with the authorities entrusted.
3. POWER CONNECTION
Your RADIO is protected against an inversion of polarities. However, YOUR SET FOR THE FIRST TIME (without transmitting or using
before switching it on, you are requested to check all the connections. the <<Push-To-Talk>> switch on the microphone)
Your equipment must be supplied with a voltage of 12 volts DC(Direct a) Connect the microphone
Current). Today, most cars and trucks are negative earth. You can b) Check the antenna connections
check this by making sure that the negative terminal of the battery is c) Turn the set on by turning the volume knob clockwise
connected either to the engine block or to the chassis. If this is not the d) Turn the squelch knob to minimum
case, you should consult your dealer.
e) Adjust the volume to a comfortable level
WARNING: trucks generally have two batteries to supply a voltage f) Tune to channel 20 at the D bank by using either the UP or DN
of 24 volts, in which case it will be necessary to insert a 24/12 volt key on the microphone or the rotary knob.
inverter into the electrical circuit. The following connection steps 5. ADJUSTMENT OF SWR(standing wave ratio)
should be carried out with the power cable disconnected from the set.
a)Check whether the battery is of 12 volts. WARNING: This process must be carried out when you use your radio
b)Locate the positive and negative terminals of the battery (+ is red for the first time (and whenever you re-position your antenna). The
and – is black). Should it be necessary to lengthen the power adjustment must be carried out in an obstacle-free area.
cable, please use the same or a superior type of cable.
c)It is necessary to connect your radio to a permanent (+) and (-). Adjustment with a built-in SWR meter or external SWR meter
We advise you to connect the power cable directly to the battery a) To connect the SWR meter
(as the connection of the cable to the wiring of the car-radio or Connect the SWR meter between the radio and the antenna as
other parts of the electrical circuit may, in some cases, increase close as possible to the radio (use a maximum of 40cm cable). 3
the possibilities of interference). b) To adjust the SWR meter
d)Connect the red wire (+) to the positive terminal of the battery -Set the radio to channel 20 at the D bank in FM.
and the black (-) wire to the negative terminal of the battery. -Slide the switch on the SWR meter to position CAL or FWD.
e)Connect the power cable to your radio. -Press the <<Push-To-Talk>> switch on the microphone to
WARNING: Never replace the original fuse (10A) by one of a different transmit.
value. -Adjust the index needle over ▼ sign by rotating the calibration knob.
4. BASIC OPERATIONS TO BE CARRIED OUT BEFORE USING -Change the switch to position SWR (reading of the SWR level).
The reading on the meter should be as near as possible to 1. If
this is not the case, re-adjust your antenna to obtain a reading
as close as possible to 1.( An SWR reading between 1 and 1.8 is
acceptable).
-It will be necessary to re-calibrate the SWR meter after each
adjustment of the antenna.
6. HOW TO USE AN ESTERNAL SWR METER
 -Set to channel 20 on D bank in FM. DW: Appears when DW function is started.
-Press <<push-to-talk>> button on the microphone to transmit. 10K: Appears when +10KHZ function is started.
-At the moment, LCD would display SWR value which should be EMG: Appears when EMG channel is used.
as close as possible to 1. If this is not the case, re-adjust your SWR: Appears when SWR is used.
antenna to obtain a SWR value as close as possible to 1 (an SRF: Appears when S/RF is used.
SWR reading between 1 and 1.8 is acceptable). SC: Appears when SCAN is used.
TSQ: Appears when CTCSS/DCS code is used.
NR: Appears when RX noise reduction is turn on.
HOW TO USE YOUR RADIO
PA、CW、AM、FM、USB、LSB: Indicate different operating modes.
<LCD Display> 1. Appears when CLARIFIER function is FINE operation.
2. Appears when CLARIFIER FUNCTION is COARSE operation or
RT operation.
3. Appears when CLARIFIER FUNCTION is transmitting frequency
regulated.

4
FUNC RB. NB/ANL DW

TX/RX
BP LOCK LCDOFF
SCAN +10KHZ SWR EMG

7 digits: Display frequency and any other information.

Indicating bars: Indicate RX, RSSI, PA, PWR, SWR.
SC.LIST HI-CUT TOT S/RF

C D AM FM
RF F PWR
RF B E CW USB CLARIFIER

The first decimal point: Appears when current channel is edited with
A F PA LSB

SCAN DEL. OFF OFF BAND MODE PUSH CHANNEL

:Appears after pressing FUNC key.

AQ:Appears when ASQ function is started (only for AM/FM). <FRONT PANEL>
RB:Appears when Roger beep function is started (enabled). 1. OFF/ON/VOLUME(Inner Dual Concentric)
NB/ANL: Appears when NB/ANL function is started (enabled). Turn clockwise to switch on the radio and set desired volume level.
BP:Appears when BP function is started (enabled). Under normal operating state, the VOLUME control is used to adjust
ECHO: Appears when ECHO function is started (enabled). the output volume obtained either by the transceiver speaker or the
VOX: Appears when VOX function is started. external speaker or the external PA speaker, if used.
NG: Appears when TX noise gate is started. 2. SQUELCH (Outer Dual Concentric)
NC: Appears when RX noise compander is started. This control is used to cut off or eliminate receiver background noise in
HI-CUT:Appears when HI－CUT function is started. the absence of an incoming signal. For maximum receiver sensitivity,
it is desired that the control be adjusted only to the point where the open field.
receiver background noise or ambient background noise is eliminated. Amplitude Modulation/AM: Communication on a field with relief and
Turn fully anticlockwise then slowly clockwise until the receiver noise obstacles in middle distance (the most used).
disappears. Any signal to be received must now be slightly stronger Upper and Lower Side Band/USB-LSB: Used for long distance
than the average received noise. Further clockwise rotation will communications (according to the propagation conditions).
increase the threshold level which a signal must overcome in order to 9. CLARIFIER
be heard. Only strong signals will be heard at a maximum clockwise This is frequency tuning knob which can be set as different modes
setting. (refer to CLA Specifications in Functions Menu for more details).
3. ECHO(Inner Dual Concentric)
10. PUSH
This switch is used to control echo effect. This is PUSH Key which can be set as different modes (refer to PSH
4. TONE (Outer Dual Concentric) specifications under Functions Menu for more details).
This switch is used to control intervals of echo sound 11. CHANNEL SELECTOR
5. RF GAIN ( Inner Dual Concentric) Rotate this switch to select any desired channel from forty citizens
This switch is for adjusting sensitivity during reception. For long band channels. The selected channel appears on the LED directly
distance communications RF GAIN should be set to maximum. RF above the channel selector knob.
GAIN can be reduced to avoid distortion, when your correspondent is 12. CHANNEL INDICATOR
5
close by and when he does not have RF POWER. The normal setting Numbered LED indicates the selected channel to operate on.
of this function is on maximum (fully clockwise). 13. RECEIVER/TRANSMIT INDICATOR
6. RF POWER (Outer Dual Concentric) When it is receiving, the LED will be green. The LED will be red when
Adjustment of the output power is for AM and FM mode only. Reducing it is transmitting.
the power is allowed when communicating with a person who has no 14. LCD DISPLAY
RF GAIN. The normal position of this function is set to maximum, fully
Display frequency, all kinds of information and icons.
clockwise.
7. BAND SELECTOR 15. FUNC
Rotate this switch to select A, B, C, D, E, F band of operation This is functional key. Press and hold this key for 2seconds to enter
into Functions Menu Setup (refer to Functions Menu for more details).
8. MODE(PA/CW/AM/FM/USB/LSB)
Press FUNC key and other individual key to realize the second
This switch allows selecting the modulation mode PA, CW, AM, FM, functions silk-screened under the button. For example, press FUNC
LSB or USB. Your modulation mode has to correspond with the one key followed by pressing RB key to realize the BP function. Press
of your correspondent. The mode selector changes the mode of FUNC key followed by DW to realize the LCD OFF function.
operation of both transmitter and receiver simultaneously. Details operations are as bellows:
Frequency Modulation/FM: for nearby communications on a flat Press FUNC key, "FUNC" icon will appear on LCD display. Release
 FUNC key, and then press other keys to realize the second functions enable this function.
silk-screened under the button. "FUNC+ Keypad name" is to be used To enable the DW function, firstly turn the SQ control clockwise
in the following operating instruction. until the background noise is cut out. Select the first channel to be
16. ROGER BEEP OR BEEP FUNCTION monitored by using the CHANNEL SELECTOR knob or the channel
selector keys on the microphone. Press the DW key and the DW icon
(1)RB
will flash on the LCD display. Secondly, follow the above procedures
Press "RB" key to enable "ROGER BEEP" function with "RB" icon to select second channel to be monitored. Finally, press the DW key
appearing on LCD display. Press the key repeatedly to switch on/off again and the two monitoring channels will be alternately indicated on
the function. the LCD. Radio will automatically start monitoring (scanning) the two
When RB function is enabled, the radio will automatically transmit the channels. When a signal is detected on one of the channels, scanning
audio signal at the end of your transmission. The listener can note stops and it is possible to listen the communications on that channel.
easily that your transmission is over through the signal. Press PTT to transmit on this channel. If there is no transmission
(2)FUNC+RB or detected signal on that channel within 5 seconds(time to resume
Press FUNC+RB to realize BP Function. It is a prompting function with scanning can be programmed by PC software), radio will resume
"BP" icon appearing on LCD display. Speaker would emit a BEEP for scanning. When the DW function is enabled, the DW icon appears on
prompting when press any key. press FUNC+RB repeatedly to switch the LCD. To exit the DW function, press the DW key or the PTT key.
on/off the function. The scan Type above is the SQ mode under SCA Selection in
6 Function Menu. If TI mode is selected and valid signal is detected, the
17. NB/ANL or LOCK
radio would still start scanning when it is time to resume scanning,
(1)Press NB/ANL key to enable NB/ANL function with "NB/ANL" icon whether there is signal or not in current channel.
appearing on the LCD display. Press the key repeatedly to switch on/
(2)FUNC+DW
off the function.
When this function is enabled, LCD display would be switched
Noise Blanker/Automatic Noise Limiter. These filters allow reducing
OFF(LCD OFF).
back ground noises and some reception interferences.
Repeat this operation to switch ON/ OFF the function.
(2)FUNC+NB/ANL
19. SCAN OR Scan.list
Press FUNC+NB/ANL to realize the Keyboard Lock function. When
this function is enabled, all keys are invalid except PTT, BAND (1)SCAN
SWITCH, and MODE SWITCH. When pressing any key except PTT, Automatic Scanning of busy channels.
BAND SWITCH, MODE SWITCH, the LOCK icon will display on the Press the SCAN key to enable the SCAN function. Before enabling the
LCD. These situations indicate that the keyboard has been locked. SCAN function, firstly turn the SQ control clockwise till the background
Press FUNC+NB/ANL repeatedly to switch on/off the function. noise is cut out. Then press the SCAN key, radio will automatically
18. DW or LCD OFF scan all channels continuously in the scan list and the SC icon will
appear on the LCD.
(1)The DW (dual watch) function allows automatic alternate
monitoring of two channels. Refer to the following procedures to When a signal is detected on a channel, scanning stops on this
channel. You can receive the calling, and also, can transmit on this (2)FUNC+ SWR
channel by pressing PTT key. If there is no transmission or detected When pressing this key, TOT ON or TOT OFF would display on the
signal on that channel within 5 seconds(time to resume scanning can LCD for 2 seconds. Repeat this operation to switch ON/OFF the
be programmed by PC software), radio will start scanning again. To function. When ON appears on the LCD, users can press PTT to
exit the SCAN function, press the SCAN key or the PTT key. transmit. Then, the radio would time the transmitting duration. Once
The Scan Type above is the SQ mode under SCA Selection in the duration is beyond the set TOT time (programmable), the radio
Function Menu. If TI mode is selected and valid signal is detected, the would emit voice prompt and stop transmitting and back to receiving
radio would still start scanning when it is time to resume scanning, state automatically. This function aims to protect the radio against
whether there is signal or not in current channel. power tube damage from superheating caused by long transmission.
(2)FUNC+SCAN 22. EMG OR S/RF
SC.LIST (Scan ADD or Delete). Press FUNC+SCAN to delete current (1)EMG realizes Emergency Channel Call. When emergent situation
channel from scan list. The first digit on LCD would display. When happens, the radio would switch to the channel set in advance to
Scan function is enabled, the radio would skip the deleted channel. communicate immediately. Then the "EMG" icon would display on the
Repeat this operation to Add or Delete channels from scan list. LCD . Press EMG key again to return to previous channel.
20. +10KHZ or HI-CUT (2)FUNC + S/RF
(1)+10KHz Press this key to shift frequency up by 10khz. S/RF is the switch of TX's or RX's S/RS indicating bar. When this
function is enabled, "SRF"icon would display on the LCD. Repeat the
When pressing this key, 10KHz would appear on LCD and frequency 7
this operation to switch ON/OFF the function.
of channels is shifted up by 10 KHz. Repeat this operation to switch
ON/OFF this function.
<Rear Panel>
(2)FUNC+ +10KHz
Press FUNC+10KHz to realize HI-CUT function. Once this function is
enabled, the radio would cut out high frequency interference. Its use
depends on reception conditions.
When this function is enabled, "HI-CUT" would appear on LCD. Repeat
this operation to switch ON/OFF the function
21. SWR OR TOT
(1)SWR
When pressing this key, “SWR” icon would appear on the LCD. When
transmitting, SRF bars indicate SWR value other than PA or PWR
value. One bar displaying on the LCD indicates that SWR value is 23. POWER
1.0. Each additional bar indicates every 0.1 added value. Repeat this Accept13.8V DC power cable with built-in fuse (10 Amp) to be
operation to switch ON/OFF the function. connected.
 24. EXT SP or PA SP 1. PTT
EXT SP Transmitting key, Press to speak and release to receive a message.
Accept 4 to 8 ohm, 4 watt external speaker to be connected. When 2. UP/DN
external speaker is connected to this jack, the built-in speaker is These key allow increasing or decreasing a channel number.
automatically disconnected.
3. AQ
PA SP
(1)When the radio is receiving a call, press this key to enable ASQ
It is used to connect a PA speaker. Before operating PA, you must (Automatic Squelch Control) function. Then, "AQ" would appear on the
firstly connect a PA speaker to this jack.
LCD. Press this key repeatedly to switch on/off the function.
25. ATTENNA (2)When the radio is receiving a call, press and hold this key for
Accept 50 ohm coaxial cable with a type PL-259 plug to be connected. over 2 seconds to enable signal monitoring function. At the moment,
26. CW KEY whether the radio receive signal or not, the radio would detect current
This jack is for Morse code operation; To operate, connect a CW channel to check whether current channel has weak signal.Release
key to this jack and place the MODE switch in the CW position (LCD AQ key to exit this function.
display icon "CW") (3)Pressing PTT and AQ key at the same time, the radio would
27. PC Cable Jack emit a single-tone. This tone is to help and remind two sides of
PC connection for software programming. communication to adjust frequency. The frequency of this tone is
8
adjustable.
(4)ASQ (Automatic Squelch Control)
<PRESS—TO—TALK—MICROPHONE> ASQ control setting.It has same function with AQ button on the
The receiver and transmitter are controlled by the Press-To-Talk microphone.
switch on the microphone.
4. MICROPHONE
Press the switch to transmit and then release
The radios come complete with low-impedance (150 ohm) dynamic
it to receive. When transmitting, hold the
microphone.
microphone two inches from the mouth and
speak clearly in a normal “voice”. The radios
come complete with low-impedance (150 ohm)
dynamic microphone.
FUNCTION MENU SETUP (06) NC
The initial functions and parameter can be changed via the following This menu refers to RX noise compander
settings and operations. Please read the following instruction before setting.
making any desired amendments. Default: OFF
To enter Function Menu: under ON state, press and hold FUNC key for
(07) NG
more than 2seconds, and then release the FUNC key to enter into the
Function Menu Setup. Under this condition, press FUNC key to select This menu refers to TX noise gate setting.
different functions menu, CHANNEL SELECTOR Switches to change Default: OFF
the data of Function Menu.
(08) NR(only for model AT-5555PLUS/N)
(01) ICG This menu refers RX noise reduction setting
This menu refers to MIC GAIN function. Default: OFF
Users can set the value by software. The
higher value goes to higher sensitivity. 64 (09) ICP
grades in total (OFF,0-63) This menu refers to microphone type setting.
Default: 41 EL: electronic type, DY: dynamic type
(02) UOL Default: DY
This menu controls the VOX sensitivity from 9
(10) NOG
level OFF to 9.
It refers to TX MON function. Users can set the
Default: OFF
volume and grade of the TX MON by software.
(03) UOT The higher grade goes to louder TX MON.
This menu controls the VOX delay time 64 grades in total (OFF,0-63)
from level 1 to 9. Default: OFF
Default: 04
(04) RCDT (11) CSU
This menu refers to RX CTCSS and DCS This menu is to adjust the side voice of CW
code setting. SIDE VOL CW. 64 grades in total.
Default: OFF Default: 31

(05) TCDT (12) BEU

This menu refers to TX CTCSS and DCS This menu is to set the volume of prompt
code setting. voice. 64 grades in total(OFF,0-63).
Default: OFF Default: 31
 (13) STP T: When this option is selected, press PUSH and turn CLARIFIER
This menu is to set tuning step when knob to change transmitting frequency. When pressing this key,
adjusting frequency by CLARIFIER knob "3" icon will display on the far left of the LCD. Under this condition,
rotate the CLARIFIER knob to change the transmitting frequency
Options: 10Hz、100Hz、1KHz、10KHz
only.
Default: 10Hz
STP:When this option is selected, PUSH function will change
(14) CLA Frequency Tuning Step of CLARIFIER knob. Press this key, then
This menu is to the corresponding frequency bit would blink.
Default: STP
set functions turned by CLARIFIER knob.
Options are as follows: (16) ASQ
FIN: Fine regulation. When this option is selected, users can fine ASQ control setting. It has same function
tuning the receiving frequency by rotating the CLARIFIER with AQ button on the microphone.
knob. In tuning process, the transmitting frequency can not be Default: OFF
regulated by the knob and “1” icon will appear on the LCD.
(17)TOT
RT: When this option is selected, users can regulate the frequency of
This menu is to set transmitting TOT time.
10 both transmitting and receiving. In tuning process, “2” icon will
When pressing PTT key at a single time
appear on the LCD.
longer than the due time setup in advance, the radio would stop
T: When this option is selected, users can only regulate the transmitting automatically and loudspeaker will emit voice prompt till
transmitting frequency. In tuning process, “3” icon will appear on PTT key is released. Then, the radio can transmit again.
the LCD.
Options: 30-600s Step: 30s
Default: RT
Default: 180s

(15) PUS (18) SC

This menu is to set functions realized via This menu is to set Scan Type. Options are
PUSH knob. Options are as follows: as follows:
SQ: When SQ is selected, scan would stop when a valid signal
COA: When this option is selected, press PUSH and turn CLARIFIER is detected. The radio would resume scanning after signal
knob to realize COARSE function. disappears for 5s.
When pressing this key, "2" icon will appear on far left of the TI: When TI is selected, scan would stop when a valid signal is
LCD. Under this condition, rotate the CLARIFIER knob to change detected. The radio would resume scanning 5 seconds later,
frequency of both transmitting and receiving. whether signal disappears or not.
Default: SQ
(19) TSR TF: When TF is selected,LCD would display transmitting frequency
This menu is to choose whether to enable when transmitting.
Transmitting SWR Protection function or SR: When SR is selected, LCD would display SWR value of antenna
not. when transmitting, for example: "1.2" on the LCD.
ON: When ON is selected, the radio will detect the SWR of antenna. BAT: When BAT is selected, LCD would display Supplied Voltage
Once the SWR is beyond the SWR set in advance, the radio when transmitting, for example: "13.8DC" on the LCD.
would prohibit transmitting automatically and loudspeaker will TOT: When TOT is selected, LCD would display TOT remaining time
emit voice prompt. Then, “HI S” icon will display on the LCD to when transmitting. And TOT would count down till remaining
remind you that the antenna SWR is too high or antenna do not time is 0, for example: "170" displayed on the LCD display.
connect well. Default: TF
OFF: When OFF is selected, SWR Protection function is disabled. (22) RBF
NOTE: To protect the radio from long transmission under high SWR, This menu is to select frequency of Roger
the radio would automatically start SWR Protection once the Beep. The frequency range is 300KHz-3KHz.
SWR Value is higher than 20:1. The shift step is 10Hz.
Default: ON (SWR=<10:1) Default: 1050Hz

(20) TDC (23) RBT 11

This menu is to choose whether to enable This menu is to select Roger Beep Holding
Power supplied Voltage Protection function. Time from 50ms—1000ms. The shift step is
ON: When ON is selected, the radio will 50ms.
detect the supplied voltage. Once the voltage surpasses the Default: 500ms
voltage setup in advance, the radio would display “DC LO” or
“DC HI” to remind you that the voltage is not in normal state. (24) CFR
Meanwhile, the radio will prohibit transmitting and emit beep This menu is to select CW Side Tone
prompt. Frequency from 300Hz-3KHz, the shift step
OFF: When OFF is selected, the Power Supplying Voltage is disabled. is 10Hz.
Default: ON (DC 10.5V-16V) Default: 1050Hz

(21) TLD (25) TON

This menu is to set the content displayed on This menu is to select Transmitting Single-
the LCD when transmitting. Tone Frequency from 300Hz-3KHz. The
shift step is 10Hz.
Default: 1050Hz
 SPECIFICATIONS
General Frequency Response AM and FM: 450 to 2500Hz
Frequency Range 28.000MHz-29.700MHz Output impedance 50ohms, unbalanced
SSB: 0.25μV for 10dB(S+N)/N at greater
Frequency Band A/B/C/D/E/F
than 1/2-watt of audio output.
Channel 60 channels (programmable) in each band
AM:1.0μV for 10 dB(S+N)/N at greater
Frequency Control Phase-Locked-Loop Synthesizer Sensitivity
than 1/2watt of audio output.
Frequency Step 10Hz 100Hz 1KHz 10KHz FM: 1.0 μV for 20 dB (S+N)/N at greater
Frequency Tolerance 0.005% than 1/2 watt of audio output.
Frequency Stability 0.001% AM/FM:6dB@3KHz,50dB @9KHz
Temperature Range -30℃to +50℃ Selectivity
SSB: 6 dB@2.1KHz,60dB @3.3KHz
Plug-in dynamic; with push-to-talk /UP/DN/ Image Rejection More than 65dB
Microphone ASQ switch and coiled cord
AM/FM: 10.695 MHz 1st IF, 455 KHz 2nd IF
DC 13.8V normal, 15.9V max; 11.7V IF Frequency
Input Voltage min Transmit: AM full mod 6A Receiver: SSB: 10.695 MHz
Squelched 0.8A SSB 30W PEP output 9A Adjacent-Channel 60dB AM/FM &70 dB SSB
12 Size 28*25*6CM Rejection
Weight 1.5KG 45 dB adjustable for optimum signal
RF Gain Control
Antenna Connector UHF,SO239 reception
TRANSMITTER Automatic Gain Less than 10 dB change in audio output
Control(AGC) for inputs from 10 to 100,000 microvolt.
AM/CW:1-12W(adjustable)
Adjustable; threshold less than 0.5 μV.
Power Output FM:1-40W(adjustable)
Squelch Automatic Squelch Control(only AM/FM)
USB/LSB:1-35W(adjustable) 0.5 μV
High and low level class B ANL Switchable
Amplitude Modulation: AM
Modulation Noise Blanker RF type, effective on AM/FM and SSB
Varied Capacitance Frequency Modulation:
FM Audio Output Power 4 watts into 8 ohms
Inter-modulation SSB: 3rd order, more than -25dB; 5th Frequency Response 300 to 2800 Hz
Distortion order, more than -35dB Built-in Speaker 8 ohms, round.
SSB Carrier Suppression 55dB External Speaker(Not 8 ohms; disables internal speaker when
Unwanted Sideband 50dB Supplied) connected.
EU Declaration of Conformity
In accordance with EU Directives and Regulations
Qixiang Electron Science & Technology Co., Ltd.
ADD: Qixiang Building, Tangxi Industrial Zone, Luojiang District, Quanzhou, Fujian, China
as the manufacturer, hereby declares under our sole responsibility that
product(s): 10METER CB RADIO
Model name: AT-5555PLUS, CRT SS6900V, AVANTI GRANDE, DX-5000
is in conformity with the essential requirements of the Radio Equipment Directive 2014/53/EU:
Radio ETSI EN 301 783 V2.1.1 (2016-01)
Article 3.2

EMC ETSI EN 301 489-1 V2.2.3 (2019-11)

Article 3.1(b) E TSI EN 301 489-15 V2.2.1 (2019-04)

Safety E N 62368-1:2014+A11:2017
Article 3.1(a)

Health
Article 3.1(a) E N IEC 62311:2020

The notified body Bay Area Compliance Labs Corp.(BACL) (EU Identification Number: 1313)
performed a conformity assessment according to Annex III, Module B.

Signed on behalf of Qixiang Electron Science & Technology Co., Ltd.

(Signature of authorized person)

Name: Melinda
Title: Manager
Date: 2022-01-08
Place: Quanzhou,Fujian, China