2008 IEEE 21st International Conference on Micro Electro Mechanical Systems, 2008
This study presents a novel process to batch-fabricated carbon nanotube devices on flexible subst... more This study presents a novel process to batch-fabricated carbon nanotube devices on flexible substrate. In short, the pre-made carbon nanotube (CNT) arrays on Si-wafer are firstly blended with polymer and are then transferred onto a polymer film using chemical-vapor-deposition (CVD) of parylene. This yields CNT arrays on flexible substrates. Electrical measurements reveal that nanotube arrays behave as ohmic conductors and
2009 IEEE International Electron Devices Meeting (IEDM), 2009
... Ta-Chuan Liaoa, Sheng-Kai Chena, Ming H. Yua, Chun-Yu Wua, Tsung-Kuei Kangb, Feng-Tso Chienb,... more ... Ta-Chuan Liaoa, Sheng-Kai Chena, Ming H. Yua, Chun-Yu Wua, Tsung-Kuei Kangb, Feng-Tso Chienb, Yen-Ting Liua, Chia-Min Linb, and Huang-Chung Chenga ... 27, no. 4, pp. 272???274, Apr. 2006. [6] J.-H. Kim, IW Cho, GJ Bae, and IS Park, ???Highly manufacturable SONOS non ...
2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS), 2010
This study establishes a batch fabricated process to implement and monolithically integrate CNTs ... more This study establishes a batch fabricated process to implement and monolithically integrate CNTs (carbon nanotubes) based physical sensors. In this process, vertically aligned CNTs (not horizontally aligned or mixed CNTs) are grown and patterned on Si-wafer as sensing elements, and also integrated with MEMS (microelectromechanical systems) structures. The mechanical deformation and temperature change is thus detected by the resistance change
2003 46th Midwest Symposium on Circuits and Systems, 2003
A 2.4 GHz / 5.2 GHz dual band CMOS power amplifier (PA) with a 21-dBm output power using 0.25-μm ... more A 2.4 GHz / 5.2 GHz dual band CMOS power amplifier (PA) with a 21-dBm output power using 0.25-μm 1P5M standard CMOS process is described. In this paper, we present a CMOS PA with a single input and a single output signal chain which simultaneously optimized for wireless local area network (WLAN) 2.4 GHz / 5.2 GHz applications designed on
In this paper, we show that both pressure and temperature can be measured simultaneously by using... more In this paper, we show that both pressure and temperature can be measured simultaneously by using a high-sensitivity fiber sensor. This sensor has a superstructure fiber grating (SFG) encapsulated in a polymer-half-filled metal cylinder, which has two openings on opposite sides of the wall of the polymer, to sense the pressure. The sensed pressure is transferred into axial extended-strain. The
In this paper, we present the experimental results of a research investigation for a hollow waveg... more In this paper, we present the experimental results of a research investigation for a hollow waveguide based fiber optic sensing device for simultaneous multiple gas detection. Gas molecules that exhibit characteristic vibrational absorption lines in the near-IR region that correspond to the transmission window for silica optical fiber have been detected by this device. An experimental setup was constructed, a fiber optic sensing device was designed and demonstrated which can monitor multiple gases simultaneously. The experimental ...
2008 IEEE 21st International Conference on Micro Electro Mechanical Systems, 2008
This study presents a novel process to batch-fabricated carbon nanotube devices on flexible subst... more This study presents a novel process to batch-fabricated carbon nanotube devices on flexible substrate. In short, the pre-made carbon nanotube (CNT) arrays on Si-wafer are firstly blended with polymer and are then transferred onto a polymer film using chemical-vapor-deposition (CVD) of parylene. This yields CNT arrays on flexible substrates. Electrical measurements reveal that nanotube arrays behave as ohmic conductors and
2009 IEEE International Electron Devices Meeting (IEDM), 2009
... Ta-Chuan Liaoa, Sheng-Kai Chena, Ming H. Yua, Chun-Yu Wua, Tsung-Kuei Kangb, Feng-Tso Chienb,... more ... Ta-Chuan Liaoa, Sheng-Kai Chena, Ming H. Yua, Chun-Yu Wua, Tsung-Kuei Kangb, Feng-Tso Chienb, Yen-Ting Liua, Chia-Min Linb, and Huang-Chung Chenga ... 27, no. 4, pp. 272???274, Apr. 2006. [6] J.-H. Kim, IW Cho, GJ Bae, and IS Park, ???Highly manufacturable SONOS non ...
2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS), 2010
This study establishes a batch fabricated process to implement and monolithically integrate CNTs ... more This study establishes a batch fabricated process to implement and monolithically integrate CNTs (carbon nanotubes) based physical sensors. In this process, vertically aligned CNTs (not horizontally aligned or mixed CNTs) are grown and patterned on Si-wafer as sensing elements, and also integrated with MEMS (microelectromechanical systems) structures. The mechanical deformation and temperature change is thus detected by the resistance change
2003 46th Midwest Symposium on Circuits and Systems, 2003
A 2.4 GHz / 5.2 GHz dual band CMOS power amplifier (PA) with a 21-dBm output power using 0.25-μm ... more A 2.4 GHz / 5.2 GHz dual band CMOS power amplifier (PA) with a 21-dBm output power using 0.25-μm 1P5M standard CMOS process is described. In this paper, we present a CMOS PA with a single input and a single output signal chain which simultaneously optimized for wireless local area network (WLAN) 2.4 GHz / 5.2 GHz applications designed on
In this paper, we show that both pressure and temperature can be measured simultaneously by using... more In this paper, we show that both pressure and temperature can be measured simultaneously by using a high-sensitivity fiber sensor. This sensor has a superstructure fiber grating (SFG) encapsulated in a polymer-half-filled metal cylinder, which has two openings on opposite sides of the wall of the polymer, to sense the pressure. The sensed pressure is transferred into axial extended-strain. The
In this paper, we present the experimental results of a research investigation for a hollow waveg... more In this paper, we present the experimental results of a research investigation for a hollow waveguide based fiber optic sensing device for simultaneous multiple gas detection. Gas molecules that exhibit characteristic vibrational absorption lines in the near-IR region that correspond to the transmission window for silica optical fiber have been detected by this device. An experimental setup was constructed, a fiber optic sensing device was designed and demonstrated which can monitor multiple gases simultaneously. The experimental ...
Uploads