Dragana Tomasevic-Pilipovic

This research is designed to determine the level and types of pollution in the highly contaminated sediments of the international Begej canal in Timiş district, Romania and north-eastern Serbia. The cross-border canal stretch investigated is currently not navigable, but represents an important waterway between the Danube River in Serbia and the city of Timisoara. Surface sediments were monitored annually from 2008 to 2016 at 36 representative sampling locations, with a wide range of analyses, including eight heavy metals of long-term monitoring concern (Ni, Zn, Cd, Cr, Cu, Pb, As and Hg) and the 16 USEPA PAHs. The purpose of this study was to determine the diversity and impact of anthropogenic and natural sources of pollution at the pollution hot spots on the canal: at the Itebej lock (near the border with Romania) and downstream at the Klek lock. Sediment quality and ecological risk were assessed in order to determine pollutants of concern. Several multi-proxies were applied (e.g. geo-accumulation index (Igeo), ecological risk index (RI) and total benzo[a]pyrene equivalent (B[a]Peq)). To determine and predict trends, multivariate statistical methods (factor analysis of principal component analysis (PCA/FA)) were carried out on the organic and inorganic parameters analysed. In the near-border region, acute and significant ecological impacts were observed. The heavy metals Hg, Cr, Pb, Cu and Zn, and the carcinogenic PAH dibenzo[a,h]anthracene, were historically the most frequently detected harmful substances to biota in this and the wider Pannonia region. This is the first long-term study to quantify and derivate the most frequently detected harmful substances of concern for this and similar sites in the wider region, and is additionally supported by significant national and similar environmental data from previous studies in the region.

The production of zero-valent iron nanoparticles, using extracts from natural products, represents a green and environmentally friendly method. Synthesis of ‘green’ zero-valent nanoparticles (nZVI) using oak and mulberry leaf extracts (OL-nZVI and ML-nZVI) proved to be a promising approach for Ni(II) and Cu(II) removal from aqueous solutions. Characterization of the produced green nZVI materials had been conducted previously and confirmed the formation of nanosize zero-valent iron particles within the size range of 10–30 nm, spherical with minimum agglomeration observed by transmission electron microscopy and scanning electron microscope morphology measurements. Batch experiments revealed that the adsorption kinetics followed a pseudo-second-order rate equation. The obtained adsorption isotherm data could be well described by the Freundlich model and OL-nZVI showed higher adsorption capacity for Ni(II) removal than ML-nZVI, while ML-nZVI adsorption capacity was higher for Cu(II). In...

Abstract The production of nano zero-valent iron nanoparticles, using the extract from natural products, increased in recent years as it represents green and environmentally friendly method. Synthesis of green zero-valent iron nanoparticles (nZVI) using oak, mulberry and cherry leaf extracts (OL-nZVI, ML-nZVI and CH-nZVI) proved to be a promising approach for As(III) and Cr(VI) removal from aqueous solutions. The oak, mulberry and cherry leaves were chosen because of their high oxidant capacity as an important property for the production of the nZVIs. Also, oak, mulberry and cherry trees are widely distributed and easy to find in Vojvodina, the north province of Serbia. Characterization of produced green nZVI materials confirmed the formation of nanosize zero-valent iron particles within the size of 10–30 nm. Nanoparticles were spherical in shape and represented stable material with minimum agglomeration observed by TEM and SEM morphology measurements. Batch experiments revealed that the adsorption kinetics followed pseudo-second order rate equation. The obtained adsorption isotherm data could be well described by the Freundlich model. In addition, investigated pH effect showed that varying the initial pH value had a great effect on As(III) and Cr(VI) removal. This study indicated that nZVI could be produced by low cost and non toxic method with oak, mulberry and cherry leaf extracts and potentially be used as a new green material for remediation of water matrices contaminated with As(III) and Cr(VI).

Increasing amounts of residues and waste materials coming from industrial activities in different processes have become an increasingly urgent problem for the future. The paper presents the problem of mine tailings generated in mine ?Sase? (Republic of Srpska, Bosnia and Herzegovina) with high metal content (Pb, Cu and Zn). Dumpsite of this tailing represents potential risk for water bodies in the vicinity of this location. Chosen treatment process was stabilization/solidification (S/S). Inorganic agents used in this study were fly ash and red mud that represent secondary industrial waste generated on locations relatively near the mine. Therefore, their application can be used as an example of a sustainable solution of regional environmental problem. Further investigations are related to the impact of various factors on metals leaching from mine tailings solidified/stabilized material using the above mentioned immobilization agents. The performance of the immobilizing procedures was...

Abstract In this work, the decolorization efficiency of Reactive Red 120 (RR120) synthetic solution using ferrioxalate (CuOFeB) and Al, Fe-bentonite (AlFeB) catalysts in the solar-assisted Fenton process was evaluated, as well as impact of H2O2 photolysis on the process efficiency.The photo-Fenton oxidation of dye has been investigated using a concentrating solar parabolic reactor with constant solar radiation of 550 W/m2 and 950 W/m2 for spring and summer periods, respectively. Experimental data has proved that photolysis of hydrogen peroxide has an important role in the process of decolorization, achieving a decolorization efficiency over 80.78% at pH 7. Under the optimal reaction conditions, both catalysts showed a good stability in the processes with dye removal over 90%. The mineralization efficiency depends on the intensity of the solar radiation, wherein ∼50% was achieved under the higher solar intensity. Comparing reaction rate it is important to note that the larger specific surface area of AlFeB (155.83 m2/g) makes him a superior catalyst and thus solar-assisted Fenton process with this catalyst fast and efficient. Based on the decolorization rate constants, the examined processes can be placed in the following order: AlFeB (950 W/m2) > AlFeB (550 W/m2) > CuOFeB (950 W/m2) > CuOFeB (550 W/m2). These findings are confirmed on real effluent, whereby a greater degree of decolorization (91.89%) and mineralization (43%) has been achieved with AlFeB catalyst compared to CuOFeB (30.09% and 15%) during the process.

The aim of this study was to determine the possibility of using fly ash and combination of kaolinite and fly ash for the solidification/stabilization (S/S) of Ni and Zn contaminated sediment from the Krivaja river basin (Serbia), which represents an extraordinary risk to the environment and belongs to the last quality class in the Serbian sediment classification. Fly ash was used as a stabilising agent because it occurs as a secondary industrial product, so in this way two types of waste are immobilized. Microwave assisted BCR sequential extraction procedure was employed to assess potential of Ni and Zn mobility and risk to the aquatic environment. In order to determine the long-term behavior of the S/S mixture, the semi-dynamic ANS 16.1 leaching test was performed. The existing leaching method was modified and acetic acid and humic acid were also used as leachants instead of deionised water, in order to simulate possible "worst case" leaching conditions for S/S waste bein...