Omar Imran

Universal Motors (UM) are normally used for driving portable apparatus such as hand tool machines, vacuum cleaners and most domestic apparatus. The importance of UM is due to its own advantages such as high starting torque, very powerful in relation to its small size, having a variable speed; and lower cost. So, this paper focus on UM speed control under variable loading conditions. A mathematical model for UM is designed. Two controllers are proposed for controlling the motor speed, output rate controller and output reset controller. Ant Colony Optimization (ACO) is proposed for tuning the controller's parameters due to its impact on solving different optimization problems. It possesses fast convergence, minimum algorithm parameters required, lower consecution time and give optimal results without needing large number of iterations. The results are compared and discussed accurately, which show the proposed tuning technique work well and give optimal results for both controllers.

Frequency oscillator is one of the basic devices that can be used in most electrical, electronics and communications circuits and systems. There are many types of oscillators depending on frequency range used in an application such as audio, radio and microwave. The needed was appeared to use high and very high frequencies to make the rapid development of advanced technology Colpitts oscillator is one of the most common types of oscillator, it can be used for radio frequency (RF), that its output signal is often utilized at the basic of a wireless communication system in most application. In this research, a Colpitts oscillator is comprised from a bipolar junction transistor (BJT) amplifier with LC tank. This design is carrying out with a known Barkhausen criterion for oscillation. Firstly, is carried out using theoretical calculation. The secondary is carried out using simulation (Multisim 13). All the obtained result from the above two approaches are 10 MHz and 9.745 MHz respectiv...

In the designing and operation of interconnected power systems, automatic-generation-control (AGC) represent an important topic. AGC is responsible for maintaining the balance between generation side and load side via controlling the frequency and active power interchange. A new metaheuristic strategy is proposed in this work for optimal controller tuning in AGC system. Ԝһale Орtimіzatіоn Αlgorithm(WOA) is proposed for optimal tuning of reset integral controller. T he proposed strategy is used for optimal AGC in two-areas interconnected-power system. The proposed tuning strategy is compared with other new metaheuristic optimization strategy termed as Harmony Search (HS). The two-area interconnected power system are simulated based MATLAB-toolbox. From results obtained, it is obvious that, the system transient and steady-state behavior are enhanced greatly under the same conditions. This is due to the use of the proposed optimization technique.  The proposed technique has an advanced...