IL VOLUME DI CODA SULLE ALI DELLA FRECCIA, LA SCELTA DELL'IMPENNAGGIO, 2014
Spesso gli arcieri pongono molta attenzione (aggiungo, a ragione) nella scelta del tipo di asta p... more Spesso gli arcieri pongono molta attenzione (aggiungo, a ragione) nella scelta del tipo di asta per le loro frecce, ne vagliano accura-tamente la lunghezza e lo spine adatti con l'aiuto di tabelle e con prove pratiche sul campo. Non sempre viene posta altrettanta cura nella scelta della forma, dimensione e posizione delle alette di im-pennaggio, o comunemente penne, per la realizzazione delle proprie frecce. Per la scelta della penna ci si basa spesso su esperienze personali, consigli, regole empiriche derivanti dal 'buon senso' ma soprattutto e giustamente su gusti personali. Buone e funzionali regole empiriche sono soprattutto due e sono fra di loro interconnesse: da un giusto impennaggio si cerca di ot-tenere una buona stabilità del volo della freccia e una bassa resi-stenza aerodinamica, sarebbe assurdo un impennaggio che renda molto stabile la freccia ma nello stesso tempo la rallenti in maniera inaccettabile. Ecco perché, soprattutto nel campo tecnologico-agonistico, se-guendo questo ragionamento, sono via via cadute in disuso le ro-mantiche penne naturali poiché offrono molta resistenza aerodina-mica e sono caratterizzate da una qualità alquanto disuniforme, al contrario delle sottilissime alette in plastica del tiro alla targa o alette in svariati materiali 'sintetici' che offrono il vantaggio di una bassa resistenza aerodinamica, una qualità uniforme e una buona stabilità dimensionale. La domanda che mi son posto è se esiste un indice, un numero, un qualcosa con cui poter confrontare fra di loro la diversa forma, di-mensione e posizionamento di alette su una stessa freccia o meglio, se esiste la possibilità di sceglierne una o l'altra a ragion veduta e non a sentimento e quindi rispondere alla domanda delle domande: nella scelta delle alette qual'è la soluzione migliore? Ed ecco quanto scaturito dalle mie domande e quanto analizzeremo di seguito in questo articolo come risposta al quesito precedente. Nelle costruzioni aeronautiche è in uso un indice che serve a valu-tare l'effi cienza della coda in un veivolo ai fi ni della stabilità: il com-plesso 'rapporto volumetrico di coda' dal quale si può ragionevol-mente derivare un ottimo indice di effi cienza per l'impennaggio di frecce semplifi candolo e adattandolo al caso col nome di VOLUME DI CODA. BALISTICA ESTERNA, LA FRECCIA IN VOLO La balistica esterna riguarda il tragitto della freccia dal momento in cui si stacca dalla corda dell'arco fi no all'impatto con il bersaglio. In quel tragitto la freccia penetra l'aria e decelera, per via della re-sistenza del mezzo attraversato. Più l'aria è densa, maggiore è la resistenza aereodinamica esercitata e più pronunciata è la parabola della sua traiettoria. D'altro canto, è proprio la "resistenza" che l'aria offre alla freccia che permette la sua stabilizzazione in volo. Nella freccia in volo, semplifi cando, i parametri che infl uiscono sulla stabilità sono il suo baricentro e il suo impennaggio. Maggiore è la massa della punta, minore è la necessità di usare im-pennaggi vistosi.
Antefatti Nel 1987, con il primo storico corso per istruttori FIARC tenutosi a Milano subito dopo... more Antefatti Nel 1987, con il primo storico corso per istruttori FIARC tenutosi a Milano subito dopo la formalizzazione della prima commissione istruzione, iniziarono a volare parole grosse, naturalmente su questo argomento. In quella sessione giunsero una settantina di arcieri, dei quali almeno la metà "vecchie volpi", sicuramente persone con maggiore esperienza e notorietà del sottoscritto che si trovava sulla cat-tedra. Quando si affrontò l'argomento degli impatti delle frecce sul bersaglio in funzione della rigidità dell'asta ci fu la sommossa (ma non si discusse affatto la definizione di "spine"!). Morbida a destra e rigida a sinistra. Il settanta per cento sosteneva (o credeva di poterlo sostenere perché l'aveva letto su manuali FITA) questa versione. Il trenta per cento circa se ne rimase zitta, poi, arrossendo, ammise che a loro succedeva l'incontrario. Ebbene, anche a me accadeva lo stesso, ed ero pronto a difendere con le unghie la mia convinzione. Certo è che presi atto di questa dicotomia. Salomonicamente provai a convincere l'uditorio che "potevano verificarsi entrambe le situazioni" senza però darne alcuna giustificazione, ripromettendomi di sperimentarci sopra. Semplicemente, notai come la totalità degli arcieri con il rest (compound) e una parte dei tradizionali con il tappetino sostenessero l'opposto delle mie percezioni.
"Viene esposto il caso studio relativo ai manufatti in argento rinvenuti nel sito archeologico di... more "Viene esposto il caso studio relativo ai manufatti in argento rinvenuti nel sito archeologico di Classe (Ravenna). Nel Settembre 2005 nello scavo dell’area portuale della città è stato rinvenuto un tesoretto di oggetti d’argento da tavola, di piena epoca bizantina, formato da sei cucchiai ed una coppa.
Gli oggetti rinvenuti appartengono ad una tipologia talmente rara e preziosa da essere considerati idonei per essere donati come ex voto ai tesori delle chiese.
Nell’ ampio progetto di collaborazione con la Soprintendenza Archeologica dell’Emilia Romagna e la Facoltà di Conservazione dei Beni Culturali questo elaborato si propone di fornire, tramite tecniche di analisi complementari non-distruttive /micro-distruttive, le informazioni inerenti la composizione della lega argentea e la caratterizzazione delle patine di corrosione e dei fenomeno di degrado in atto.
Queste informazioni consentiranno di formulare ipotesi sulle tecniche di produzione e di proporre un’ intervento di conservazione e restauro."
published in: Atti del “X congresso nazionale di chimica dell’ambiente e dei beni culturali”, Acaya, Vernole (Lecce), 11 - 15 Giugno 2007
"Nel settembre 2005 nello scavo del “podere Chiavichetta” di Classe (RA) è stato rinvenuto un tes... more "Nel settembre 2005 nello scavo del “podere Chiavichetta” di Classe (RA) è stato rinvenuto un tesoretto di oggetti in argento, di piena epoca bizantina (V-VII sec. d. C.), formato da alcuni cucchiai e una coppa. Già dalle prime osservazioni archeologiche, è risultata chiara l’importanza e la preziosità degli oggetti, finemente decorati e scarsamente ergonomici,forse destinati ad un uso battesimale.
In collaborazione con la Soprintendenza Archeologica dell’Emilia Romagna, è stata impostata una serie di indagini volte a raccogliere informazioni sia sulla natura dei materiali (composizione della lega e microstruttura) sia sullo stato di conservazione dei reperti.
I microcampioni prelevati in corrispondenza di zone già danneggiate dalla permanenza nel sottosuolo, sono stati analizzati mediante XRF, microscopia stereoscopica, ottica ed elettronica a scansione a pressione variabile (VP-SEM), con sonda EDS.
Alcuni prodotti di corrosione sono stati inoltre sottoposti ad analisi mediate spettroscopia FTIR (microATR e trasmissione in pasticca di KBr) e XRD.
I risultati ottenuti hanno permesso di individuare sia le sequenze tecnologiche di produzione (la coppa è stata ottenuta per lavorazione termomeccanica, decorata a cesello-sbalzo ed incisione ed infine dorata, mentre i cucchiai
sono stati ottenuti per fusione) che le modalità di degrado: sui reperti sono stati individuati due distinti strati di corrosione, uno più interno formato da cloruri di argento e uno più esterno formato da solfuri di argento.
Le informazioni ottenute dalla sequenza analitica sono state utilizzate nella definizione dell’intervento di restauro."
Nella ricostruzione fiunzionale degli archi antichi, molti elementi sono ancora misteriosi, sopra... more Nella ricostruzione fiunzionale degli archi antichi, molti elementi sono ancora misteriosi, soprattutto quelli relativi alle parti in apparenza accessorie di materia organica, come le corde. Lo studio sperimentale delle corde individua alcuni percorsi obbligati, soprattutto quando si prende in considerazione la materia vegetale più resistente e inallungabile come il lino. In questo articolo divulgativo vengono prese in considerazione le interazioni di carattere chimico-fisico fra le fibre cellulosiche del lino e le sostanze a carattere prettamente apolare.Viene trattata la preparazione e manutenzione della corda di lino e le componenti legate al suo grado di umidità in funzione della resistenza a trazione. Viene inoltre esaminato il supposto vantaggio del processo di ceratura.
"L'articolo, di carattere divulgativo, tratta sui sistemi di incollaggio preistorico ed etnografi... more "L'articolo, di carattere divulgativo, tratta sui sistemi di incollaggio preistorico ed etnografico delle cuspidi litiche alle aste tramite mastici ricavati dalla resina di Pino (Pinus sp). Vengono esaminate sommariamente, in funzione dei diversi componenti del mastice, le trasformazioni chimiche associate e raffrontate le resistenze alla sollecitazione a diverse temperature di utilizzo.
L'uso di terre ocrose (ossidi ferrosi) in aggiunta al carbone si rivela di fondamentale importanza ai fini della resistenza dell'incollaggio e alla resistenza dei manufatti assemblati sottoposti ad uso a temperature ambientali elevate."
IL VOLUME DI CODA SULLE ALI DELLA FRECCIA, LA SCELTA DELL'IMPENNAGGIO, 2014
Spesso gli arcieri pongono molta attenzione (aggiungo, a ragione) nella scelta del tipo di asta p... more Spesso gli arcieri pongono molta attenzione (aggiungo, a ragione) nella scelta del tipo di asta per le loro frecce, ne vagliano accura-tamente la lunghezza e lo spine adatti con l'aiuto di tabelle e con prove pratiche sul campo. Non sempre viene posta altrettanta cura nella scelta della forma, dimensione e posizione delle alette di im-pennaggio, o comunemente penne, per la realizzazione delle proprie frecce. Per la scelta della penna ci si basa spesso su esperienze personali, consigli, regole empiriche derivanti dal 'buon senso' ma soprattutto e giustamente su gusti personali. Buone e funzionali regole empiriche sono soprattutto due e sono fra di loro interconnesse: da un giusto impennaggio si cerca di ot-tenere una buona stabilità del volo della freccia e una bassa resi-stenza aerodinamica, sarebbe assurdo un impennaggio che renda molto stabile la freccia ma nello stesso tempo la rallenti in maniera inaccettabile. Ecco perché, soprattutto nel campo tecnologico-agonistico, se-guendo questo ragionamento, sono via via cadute in disuso le ro-mantiche penne naturali poiché offrono molta resistenza aerodina-mica e sono caratterizzate da una qualità alquanto disuniforme, al contrario delle sottilissime alette in plastica del tiro alla targa o alette in svariati materiali 'sintetici' che offrono il vantaggio di una bassa resistenza aerodinamica, una qualità uniforme e una buona stabilità dimensionale. La domanda che mi son posto è se esiste un indice, un numero, un qualcosa con cui poter confrontare fra di loro la diversa forma, di-mensione e posizionamento di alette su una stessa freccia o meglio, se esiste la possibilità di sceglierne una o l'altra a ragion veduta e non a sentimento e quindi rispondere alla domanda delle domande: nella scelta delle alette qual'è la soluzione migliore? Ed ecco quanto scaturito dalle mie domande e quanto analizzeremo di seguito in questo articolo come risposta al quesito precedente. Nelle costruzioni aeronautiche è in uso un indice che serve a valu-tare l'effi cienza della coda in un veivolo ai fi ni della stabilità: il com-plesso 'rapporto volumetrico di coda' dal quale si può ragionevol-mente derivare un ottimo indice di effi cienza per l'impennaggio di frecce semplifi candolo e adattandolo al caso col nome di VOLUME DI CODA. BALISTICA ESTERNA, LA FRECCIA IN VOLO La balistica esterna riguarda il tragitto della freccia dal momento in cui si stacca dalla corda dell'arco fi no all'impatto con il bersaglio. In quel tragitto la freccia penetra l'aria e decelera, per via della re-sistenza del mezzo attraversato. Più l'aria è densa, maggiore è la resistenza aereodinamica esercitata e più pronunciata è la parabola della sua traiettoria. D'altro canto, è proprio la "resistenza" che l'aria offre alla freccia che permette la sua stabilizzazione in volo. Nella freccia in volo, semplifi cando, i parametri che infl uiscono sulla stabilità sono il suo baricentro e il suo impennaggio. Maggiore è la massa della punta, minore è la necessità di usare im-pennaggi vistosi.
Antefatti Nel 1987, con il primo storico corso per istruttori FIARC tenutosi a Milano subito dopo... more Antefatti Nel 1987, con il primo storico corso per istruttori FIARC tenutosi a Milano subito dopo la formalizzazione della prima commissione istruzione, iniziarono a volare parole grosse, naturalmente su questo argomento. In quella sessione giunsero una settantina di arcieri, dei quali almeno la metà "vecchie volpi", sicuramente persone con maggiore esperienza e notorietà del sottoscritto che si trovava sulla cat-tedra. Quando si affrontò l'argomento degli impatti delle frecce sul bersaglio in funzione della rigidità dell'asta ci fu la sommossa (ma non si discusse affatto la definizione di "spine"!). Morbida a destra e rigida a sinistra. Il settanta per cento sosteneva (o credeva di poterlo sostenere perché l'aveva letto su manuali FITA) questa versione. Il trenta per cento circa se ne rimase zitta, poi, arrossendo, ammise che a loro succedeva l'incontrario. Ebbene, anche a me accadeva lo stesso, ed ero pronto a difendere con le unghie la mia convinzione. Certo è che presi atto di questa dicotomia. Salomonicamente provai a convincere l'uditorio che "potevano verificarsi entrambe le situazioni" senza però darne alcuna giustificazione, ripromettendomi di sperimentarci sopra. Semplicemente, notai come la totalità degli arcieri con il rest (compound) e una parte dei tradizionali con il tappetino sostenessero l'opposto delle mie percezioni.
"Viene esposto il caso studio relativo ai manufatti in argento rinvenuti nel sito archeologico di... more "Viene esposto il caso studio relativo ai manufatti in argento rinvenuti nel sito archeologico di Classe (Ravenna). Nel Settembre 2005 nello scavo dell’area portuale della città è stato rinvenuto un tesoretto di oggetti d’argento da tavola, di piena epoca bizantina, formato da sei cucchiai ed una coppa.
Gli oggetti rinvenuti appartengono ad una tipologia talmente rara e preziosa da essere considerati idonei per essere donati come ex voto ai tesori delle chiese.
Nell’ ampio progetto di collaborazione con la Soprintendenza Archeologica dell’Emilia Romagna e la Facoltà di Conservazione dei Beni Culturali questo elaborato si propone di fornire, tramite tecniche di analisi complementari non-distruttive /micro-distruttive, le informazioni inerenti la composizione della lega argentea e la caratterizzazione delle patine di corrosione e dei fenomeno di degrado in atto.
Queste informazioni consentiranno di formulare ipotesi sulle tecniche di produzione e di proporre un’ intervento di conservazione e restauro."
published in: Atti del “X congresso nazionale di chimica dell’ambiente e dei beni culturali”, Acaya, Vernole (Lecce), 11 - 15 Giugno 2007
"Nel settembre 2005 nello scavo del “podere Chiavichetta” di Classe (RA) è stato rinvenuto un tes... more "Nel settembre 2005 nello scavo del “podere Chiavichetta” di Classe (RA) è stato rinvenuto un tesoretto di oggetti in argento, di piena epoca bizantina (V-VII sec. d. C.), formato da alcuni cucchiai e una coppa. Già dalle prime osservazioni archeologiche, è risultata chiara l’importanza e la preziosità degli oggetti, finemente decorati e scarsamente ergonomici,forse destinati ad un uso battesimale.
In collaborazione con la Soprintendenza Archeologica dell’Emilia Romagna, è stata impostata una serie di indagini volte a raccogliere informazioni sia sulla natura dei materiali (composizione della lega e microstruttura) sia sullo stato di conservazione dei reperti.
I microcampioni prelevati in corrispondenza di zone già danneggiate dalla permanenza nel sottosuolo, sono stati analizzati mediante XRF, microscopia stereoscopica, ottica ed elettronica a scansione a pressione variabile (VP-SEM), con sonda EDS.
Alcuni prodotti di corrosione sono stati inoltre sottoposti ad analisi mediate spettroscopia FTIR (microATR e trasmissione in pasticca di KBr) e XRD.
I risultati ottenuti hanno permesso di individuare sia le sequenze tecnologiche di produzione (la coppa è stata ottenuta per lavorazione termomeccanica, decorata a cesello-sbalzo ed incisione ed infine dorata, mentre i cucchiai
sono stati ottenuti per fusione) che le modalità di degrado: sui reperti sono stati individuati due distinti strati di corrosione, uno più interno formato da cloruri di argento e uno più esterno formato da solfuri di argento.
Le informazioni ottenute dalla sequenza analitica sono state utilizzate nella definizione dell’intervento di restauro."
Nella ricostruzione fiunzionale degli archi antichi, molti elementi sono ancora misteriosi, sopra... more Nella ricostruzione fiunzionale degli archi antichi, molti elementi sono ancora misteriosi, soprattutto quelli relativi alle parti in apparenza accessorie di materia organica, come le corde. Lo studio sperimentale delle corde individua alcuni percorsi obbligati, soprattutto quando si prende in considerazione la materia vegetale più resistente e inallungabile come il lino. In questo articolo divulgativo vengono prese in considerazione le interazioni di carattere chimico-fisico fra le fibre cellulosiche del lino e le sostanze a carattere prettamente apolare.Viene trattata la preparazione e manutenzione della corda di lino e le componenti legate al suo grado di umidità in funzione della resistenza a trazione. Viene inoltre esaminato il supposto vantaggio del processo di ceratura.
"L'articolo, di carattere divulgativo, tratta sui sistemi di incollaggio preistorico ed etnografi... more "L'articolo, di carattere divulgativo, tratta sui sistemi di incollaggio preistorico ed etnografico delle cuspidi litiche alle aste tramite mastici ricavati dalla resina di Pino (Pinus sp). Vengono esaminate sommariamente, in funzione dei diversi componenti del mastice, le trasformazioni chimiche associate e raffrontate le resistenze alla sollecitazione a diverse temperature di utilizzo.
L'uso di terre ocrose (ossidi ferrosi) in aggiunta al carbone si rivela di fondamentale importanza ai fini della resistenza dell'incollaggio e alla resistenza dei manufatti assemblati sottoposti ad uso a temperature ambientali elevate."
Uploads
Papers by Sara Iacopini
Gli oggetti rinvenuti appartengono ad una tipologia talmente rara e preziosa da essere considerati idonei per essere donati come ex voto ai tesori delle chiese.
Nell’ ampio progetto di collaborazione con la Soprintendenza Archeologica dell’Emilia Romagna e la Facoltà di Conservazione dei Beni Culturali questo elaborato si propone di fornire, tramite tecniche di analisi complementari non-distruttive /micro-distruttive, le informazioni inerenti la composizione della lega argentea e la caratterizzazione delle patine di corrosione e dei fenomeno di degrado in atto.
Queste informazioni consentiranno di formulare ipotesi sulle tecniche di produzione e di proporre un’ intervento di conservazione e restauro."
In collaborazione con la Soprintendenza Archeologica dell’Emilia Romagna, è stata impostata una serie di indagini volte a raccogliere informazioni sia sulla natura dei materiali (composizione della lega e microstruttura) sia sullo stato di conservazione dei reperti.
I microcampioni prelevati in corrispondenza di zone già danneggiate dalla permanenza nel sottosuolo, sono stati analizzati mediante XRF, microscopia stereoscopica, ottica ed elettronica a scansione a pressione variabile (VP-SEM), con sonda EDS.
Alcuni prodotti di corrosione sono stati inoltre sottoposti ad analisi mediate spettroscopia FTIR (microATR e trasmissione in pasticca di KBr) e XRD.
I risultati ottenuti hanno permesso di individuare sia le sequenze tecnologiche di produzione (la coppa è stata ottenuta per lavorazione termomeccanica, decorata a cesello-sbalzo ed incisione ed infine dorata, mentre i cucchiai
sono stati ottenuti per fusione) che le modalità di degrado: sui reperti sono stati individuati due distinti strati di corrosione, uno più interno formato da cloruri di argento e uno più esterno formato da solfuri di argento.
Le informazioni ottenute dalla sequenza analitica sono state utilizzate nella definizione dell’intervento di restauro."
L'uso di terre ocrose (ossidi ferrosi) in aggiunta al carbone si rivela di fondamentale importanza ai fini della resistenza dell'incollaggio e alla resistenza dei manufatti assemblati sottoposti ad uso a temperature ambientali elevate."
Gli oggetti rinvenuti appartengono ad una tipologia talmente rara e preziosa da essere considerati idonei per essere donati come ex voto ai tesori delle chiese.
Nell’ ampio progetto di collaborazione con la Soprintendenza Archeologica dell’Emilia Romagna e la Facoltà di Conservazione dei Beni Culturali questo elaborato si propone di fornire, tramite tecniche di analisi complementari non-distruttive /micro-distruttive, le informazioni inerenti la composizione della lega argentea e la caratterizzazione delle patine di corrosione e dei fenomeno di degrado in atto.
Queste informazioni consentiranno di formulare ipotesi sulle tecniche di produzione e di proporre un’ intervento di conservazione e restauro."
In collaborazione con la Soprintendenza Archeologica dell’Emilia Romagna, è stata impostata una serie di indagini volte a raccogliere informazioni sia sulla natura dei materiali (composizione della lega e microstruttura) sia sullo stato di conservazione dei reperti.
I microcampioni prelevati in corrispondenza di zone già danneggiate dalla permanenza nel sottosuolo, sono stati analizzati mediante XRF, microscopia stereoscopica, ottica ed elettronica a scansione a pressione variabile (VP-SEM), con sonda EDS.
Alcuni prodotti di corrosione sono stati inoltre sottoposti ad analisi mediate spettroscopia FTIR (microATR e trasmissione in pasticca di KBr) e XRD.
I risultati ottenuti hanno permesso di individuare sia le sequenze tecnologiche di produzione (la coppa è stata ottenuta per lavorazione termomeccanica, decorata a cesello-sbalzo ed incisione ed infine dorata, mentre i cucchiai
sono stati ottenuti per fusione) che le modalità di degrado: sui reperti sono stati individuati due distinti strati di corrosione, uno più interno formato da cloruri di argento e uno più esterno formato da solfuri di argento.
Le informazioni ottenute dalla sequenza analitica sono state utilizzate nella definizione dell’intervento di restauro."
L'uso di terre ocrose (ossidi ferrosi) in aggiunta al carbone si rivela di fondamentale importanza ai fini della resistenza dell'incollaggio e alla resistenza dei manufatti assemblati sottoposti ad uso a temperature ambientali elevate."