Carrier Aggregation (CA) has been proposed by 3GPP LTE-Advanced to meet or even exceed IMT-Advanc... more Carrier Aggregation (CA) has been proposed by 3GPP LTE-Advanced to meet or even exceed IMT-Advanced systems enhanced peak data rates requirements. In its rationale, multiple Component Carriers (CC) can be flexibly aggregated so that user equipment can access a total bandwidth of up to 100 MHz. As each CC has the same structure as the one from LTE R8, CA does not require notable changes in the LTE physical layer structure. Nevertheless, the way radio resources are allocated to mobile users in CA scenarios is still an hot research topic and the availability of an open source tool modelling such kind of feature is highly demanded in both academia and industry contexts. The present contribution is three-folded. First, it presents an open source and freeware extension of the well-known LTE-Sim simulator, which implements CA functionalities. Second, it also proposes an implementation of multi-band scheduling strategies able to optimally distribute radio resource among mobile users in the presence of multiple CCs and strict Quality of Service (QoS) constraints. Third, computer simulations have been also carried out to demonstrate the effectiveness of the aforementioned contributions. In particular, simulation results show the capacity improvements achieved by the proposed Enhanced Multi Scheduler against systems without CA, considering values of the bandwidth per component carrier of 5 and 20 MHz, in terms of average cell packet loss, delay, goodput and spectral efficiency.
World Academy of Science, Engineering and Technology, International Journal of Electrical and Computer Engineering, 2020
This work is funded by FCT/MCTES through national funds and when applicable co-funded EU funds un... more This work is funded by FCT/MCTES through national funds and when applicable co-funded EU funds under the project UIDB/EEA/50008/2020, COST CA 15104 IRACON, ORCIP and CONQUEST (CMU/ECE/0030/2017), TeamUp5G project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie project number 813391.
This work aims at studying the indoor deployment of small cells, also known as femtocells, to pro... more This work aims at studying the indoor deployment of small cells, also known as femtocells, to provide coverage to a 5×5 grid geometry. The number of deployed HeNBs is 4, 5, or 6. An updated version of LTE-Sim is considered to extract values for Exponential Effective SINR Mapping (EESM), Packet Loss Ratio (PLR), maximum number of supported users, goodput and delay. Results reveal that the use of four HeNBs corresponds to the highest values of EESM. For the considered geometry, 3GPP suggested a maximum of five HeNBs. However, this deployment shows worser performance compared to the topology with four HeNBs. The geometry with six HeNBs is the one with the best overall performance results for the 5×5 grid of apartments.
Since the dawn of mobile communication systems, reducing the cell size has been one option to inc... more Since the dawn of mobile communication systems, reducing the cell size has been one option to increase the signal-to-interference-plus-noise ratio (SINR) in both links. The impact of this reduction can be perfectly understood by considering Shannon’s law. This work studies in detail the performance of Home eNBs (HeNBs), nodes with a smaller coverage area. After a detailed theoretical study of the SINR, a simulation approach is used to extract performance results in small cell indoor scenarios. Results corresponding to the goodput, delay and packet loss ratio are analyzed. Based on an improved version of LTE-Sim, the proportional fair, frame level scheduler (FLS) and exponential rule are tested in an indoor environment. With the saturation conditions taken into consideration, the FLS performs better than the other schedulers. This work shows that with the considered applications, it is possible to achieve a reduction in the transmitter power of HeNBs without compromising the small ce...
This work analyses the Ultra High Frequency (UHF, n7), and Super High Frequency (SHF, n48 and n46... more This work analyses the Ultra High Frequency (UHF, n7), and Super High Frequency (SHF, n48 and n46) bands, performance in a Urban Micro-cellular (UMi) scenario. We consider the two-ray dual-slope path loss model while extracting the performance metrics, exponential effective SINR mapping (EESM) and transport block size (TBS). This study of the EESM and TBS facilitates to understand the behaviour of the link state. Performance evaluation includes the analysis of the packet loss ratio, maximum number of supported users, goodput and delay. One can conclude that the performance at the 2.6 GHz frequency band is better than at the 3.5 GHz or 5.62 GHz ones for coverage distances, ranging from circa 40 up to 400 m radius. In fact, average supported throughputs near the maximum (of more than 16 Mb/s) are achieved for cell radii of circa 200 m and 250 m, at 2.6 and 3.5 GHz, respectively, and 400 m for the 5.62 GHz frequency bands.
Proceedings of the Advanced International Conference on Telecommunications and International Conference on Internet and Web Applications and Services, AICT/ICIW'06, 2006
Carrier Aggregation (CA) has been proposed by 3GPP LTE-Advanced to meet or even exceed IMT-Advanc... more Carrier Aggregation (CA) has been proposed by 3GPP LTE-Advanced to meet or even exceed IMT-Advanced systems enhanced peak data rates requirements. In its rationale, multiple Component Carriers (CC) can be flexibly aggregated so that user equipment can access a total bandwidth of up to 100 MHz. As each CC has the same structure as the one from LTE R8, CA does not require notable changes in the LTE physical layer structure. Nevertheless, the way radio resources are allocated to mobile users in CA scenarios is still an hot research topic and the availability of an open source tool modelling such kind of feature is highly demanded in both academia and industry contexts. The present contribution is three-folded. First, it presents an open source and freeware extension of the well-known LTE-Sim simulator, which implements CA functionalities. Second, it also proposes an implementation of multi-band scheduling strategies able to optimally distribute radio resource among mobile users in the presence of multiple CCs and strict Quality of Service (QoS) constraints. Third, computer simulations have been also carried out to demonstrate the effectiveness of the aforementioned contributions. In particular, simulation results show the capacity improvements achieved by the proposed Enhanced Multi Scheduler against systems without CA, considering values of the bandwidth per component carrier of 5 and 20 MHz, in terms of average cell packet loss, delay, goodput and spectral efficiency.
World Academy of Science, Engineering and Technology, International Journal of Electrical and Computer Engineering, 2020
This work is funded by FCT/MCTES through national funds and when applicable co-funded EU funds un... more This work is funded by FCT/MCTES through national funds and when applicable co-funded EU funds under the project UIDB/EEA/50008/2020, COST CA 15104 IRACON, ORCIP and CONQUEST (CMU/ECE/0030/2017), TeamUp5G project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie project number 813391.
This work aims at studying the indoor deployment of small cells, also known as femtocells, to pro... more This work aims at studying the indoor deployment of small cells, also known as femtocells, to provide coverage to a 5×5 grid geometry. The number of deployed HeNBs is 4, 5, or 6. An updated version of LTE-Sim is considered to extract values for Exponential Effective SINR Mapping (EESM), Packet Loss Ratio (PLR), maximum number of supported users, goodput and delay. Results reveal that the use of four HeNBs corresponds to the highest values of EESM. For the considered geometry, 3GPP suggested a maximum of five HeNBs. However, this deployment shows worser performance compared to the topology with four HeNBs. The geometry with six HeNBs is the one with the best overall performance results for the 5×5 grid of apartments.
Since the dawn of mobile communication systems, reducing the cell size has been one option to inc... more Since the dawn of mobile communication systems, reducing the cell size has been one option to increase the signal-to-interference-plus-noise ratio (SINR) in both links. The impact of this reduction can be perfectly understood by considering Shannon’s law. This work studies in detail the performance of Home eNBs (HeNBs), nodes with a smaller coverage area. After a detailed theoretical study of the SINR, a simulation approach is used to extract performance results in small cell indoor scenarios. Results corresponding to the goodput, delay and packet loss ratio are analyzed. Based on an improved version of LTE-Sim, the proportional fair, frame level scheduler (FLS) and exponential rule are tested in an indoor environment. With the saturation conditions taken into consideration, the FLS performs better than the other schedulers. This work shows that with the considered applications, it is possible to achieve a reduction in the transmitter power of HeNBs without compromising the small ce...
This work analyses the Ultra High Frequency (UHF, n7), and Super High Frequency (SHF, n48 and n46... more This work analyses the Ultra High Frequency (UHF, n7), and Super High Frequency (SHF, n48 and n46) bands, performance in a Urban Micro-cellular (UMi) scenario. We consider the two-ray dual-slope path loss model while extracting the performance metrics, exponential effective SINR mapping (EESM) and transport block size (TBS). This study of the EESM and TBS facilitates to understand the behaviour of the link state. Performance evaluation includes the analysis of the packet loss ratio, maximum number of supported users, goodput and delay. One can conclude that the performance at the 2.6 GHz frequency band is better than at the 3.5 GHz or 5.62 GHz ones for coverage distances, ranging from circa 40 up to 400 m radius. In fact, average supported throughputs near the maximum (of more than 16 Mb/s) are achieved for cell radii of circa 200 m and 250 m, at 2.6 and 3.5 GHz, respectively, and 400 m for the 5.62 GHz frequency bands.
Proceedings of the Advanced International Conference on Telecommunications and International Conference on Internet and Web Applications and Services, AICT/ICIW'06, 2006
Uploads
Papers by Rui R . Paulo