Org
Doc #
ISO
ISO
ISO
ISO
1
2
3
4
ISO
ISO
ISO
ISO
5-1
5-2
5-3
5-4
Title
Geometrical Product Specifications (GPS) - Standard Reference Temperature for Geometrical Product Specification and Verification
Second Edition
Textiles - Designation of the Direction of Twist in Yarns and Related Products First Edition
Preferred Numbers - Series of Preferred Numbers First Edition; PNS 399: 1991
Information and Documentation - Rules for the Abbreviation of Title Words and Titles of Publications Third Edition
Photography - Density Measurements - Part 1: Terms, Symbols and Notations Photgraphie - Mesurage des densites - Partie 1:
Termes, symboles et notations First Edition
Photography - Density Measurements - Part 2: Geometric Conditions for Transmission Density Fourth Edition
Photography - Density Measurements - Part 3: Spectral Conditions Second Edition
Photography - Density Measurements - Part 4: Geometric Conditions for Reflection Density Second Edition
ISO
6
Photography - Black-and-White Pictorial Still Camera Negative Film/Process Systems - Determination of ISO Speed Second Edition
ISO
7-1 CORR 1
Pipe Threads Where Pressure-Tight Joints Are Made on the Threads - Part 1: Dimensions, Tolerances and Designation Third Edition
ISO
7-1
Pipe Threads Where Pressure-Tight Joints Are Made on the Threads - Part 1: Dimensions, Tolerances and Designation Third Edition
ISO
ISO
7-2
8
ISO
ISO
9
11
ISO
ISO
14
15
Pipe Threads Where Pressure-Tight Joints Are Made on the Threads - Part 2: Verification by Means of Limit Gauges Second Edition
Documentation - Presentation of Periodicals First Edition; Erratum-1979
Information and Documentation - Transliteration of Cyrillic Characters into Latin Characters - Slavic and Non-Slavic Languages
Second Edition
Aircraft - Ground Pressure Testing Connections for Pressure Cabins Second Edition
Straight-Sided Splines for Cylindrical Shafts with Internal Centering - Dimensions, Tolerances and Verification Second Edition; JIS B
1601:1996
Rolling Bearings - Radial Bearings - Boundary Dimensions, General Plan Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
16
17
18
21
22
23
25
26
28
Acoustics - Standard Tuning Frequency (Standard Musical Pitch) First Edition (NZS/ISO 16: 1975) First Edition; NZS/ISO 16: 1975
Guide to the Use of Preferred Numbers and of Series of Preferred Numbers First Edition; PNS 400: 1991
Documentation - Contents List of Periodicals First Edition
Shipbuilding - Inland Navigation - Cable-Lifters for Stud-Link Anchor Chains Second Edition
Belt Drives - Flat Transmission Belts and Corresponding Pulleys - Dimensions and Tolerances Second Edition
Cinematography - Camera Usage of 35 mm Motion-Picture Film - Specifications Second Edition
Cinematography - Camera Usage of 16 mm Motion-Picture Film - Specifications Second Edition
Cinematography - Projector Usage of 16 mm Motion-Picture Films for Direct Front Projection - Specifications Third Edition
Cinematography - Camera Usage of 8 mm Type R Motion-Picture Film - Specifications First Edition
ISO
31-0
ISO
ISO
ISO
ISO
ISO
31-5
31-6
31-8
31-9
31-10
Quantities and Units - Part 0: General Principles Third Edition; Amendment 1: 12/15/1998; Amendment 2: 10/1/2005
Quantities and Units - Part 5: Electricity and Magnetism Second Edition; Corrected and Reprinted: 05/15/1993; Amendment 1:
12/15/1998
Quantities and Units - Part 6: Light and Related Electromagnetic Radiations Third Edition; Amendment 1: 12/15/1998
Quantities and Units - Part 8: Physical Chemistry and Molecular Physics Third Edition; Amendment 1: 12/15/1998
Quantities and Units - Part 9: Atomic and Nuclear Physics Third Edition; Amendment 1: 12/15/1998
Quantities and Units - Part 10: Nuclear Reactions and Ionizing Radiations Third Edition; Amendment 1: 12/15/1998
ISO
ISO
ISO
ISO
31-11
31-12
31-13
32
Quantities and Units - Part 11: Mathematical Signs and Symbols for Use in the Physical Sciences and Technology Second Edition
Quantities and Units - Part 12: Characteristic Numbers Third Edition; Amendment 1: 12/15/1998
Quantities and Units - Part 13: Solid State Physics Third Edition; Amendment 1: 12/15/1998
Gas Cylinders for Medical Use - Marking for Identification of Content First Edition; Erratum-1979
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
34-1
34-2
35 AMD 1
35
36
37
43
44
45
46
48
49
53
54
60
Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces Second Edition
Rubber, vulcanized or thermoplastic ù Determination of tear strength ù Part 2: Small (Delft) test pieces Second Edition
Natural rubber latex concentrate ù Determination of mechanical stability AMENDMENT 1: Precision data Fifth Edition
Natural rubber latex concentrate ù Determination of mechanical stability Fifth Edition
Rubber, Vulcanized or Thermoplastic - Determination of Adhesion to Textile Fabric Fourth Edition
Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties Fourth Edition
Aircraft - Jacking Pads First Edition
Aerospace - Lever-Operated, Two-Position, ON/OFF Switches - Directions of Operation First Edition
Aircraft - Pressure Refuelling Connections Second Edition
Aircraft - Fuel Nozzle Grounding Plugs and Sockets First Edition
Rubber, vulcanized or thermoplastic ù Determination of hardness (hardness between 10 IRHD and 100 IRHD) Fourth Edition
Malleable Cast Iron Fittings Threaded to ISO 7-1 Second Edition; Corrigendum 1 02/15/1997
Cylindrical Gears for General and Heavy Engineering - Standard Basic Rack Tooth Profile Second Edition
Cylindrical Gears for General Engineering and for Heavy Engineering - Modules Second Edition
Plastics - Determination of Apparent Density of Material That Can Be Poured from a Specified Funnel Second Edition
ISO
ISO
ISO
61
62
65
ISO
68-1
ISO
68-2
Plastics - Determination of Apparent Density of Moulding Material That Cannot Be Poured from a Specified Funnel First Edition
Plastics - Determination of Water Absorption Second Edition
Carbon Steel Tubes Suitable for Screwing in Accordance with ISO 7/1 Second Edition
ISO General Purpose Screw Threads - Basic Profile Part 1: Metric Screw Threads First Edition; This Standard Together with ISO 682 Cancels and Replaces ISO 68
ISO General Purpose Screw Threads - Basic Profile Part 2: Inch Screw Threads First Edition; This Standard Together with ISO 68-1
Cancels and Replaces ISO 68
ISO
69
ISO
70
ISO
71
ISO
ISO
74
75-1
ISO
75-2
ISO
ISO
ISO
ISO
ISO
75-3
76
78-2
78-3
78-4
ISO
90-1
ISO
90-2
ISO
90-3
ISO
ISO
ISO
ISO
ISO
ISO
91-1
91-2
92
93-1
93-2
94
ISO
96-1
ISO
96-2
ISO
ISO
98
102
Cinematography - 16 mm Motion-Picture and Magnetic Film - Cutting and Perforating Dimensions Third Edition
Cinematography - Monophonic 35 mm Negative Photographic Sound Record on 35 mm Motion-Picture Film - Position and Maximum
Width Dimensions Second Edition
Cinematography - 16 mm Negative Photographic Sound Record on 16 mm, 35/16 mm and 35/32 mm Motion-Picture Film - Positions
and Dimensions First Edition
Cinematography - Image Area Produced by Camera Aperture and Maximum Projectable Image Area on 8 mm Type R Motion-Picture
Film - Positions and Dimensions First Edition
Plastics - Determination of Temperature of Deflection under Load - Part 1: General Test Method Second Edition
Plastics - Determination of Temperature of Deflection under Load - Part 2: Plastics and Ebonite Second Edition [Superseded By: JSA
JIS K 7191-2, JSA JIS K 7191-2]
Plastics - Determination of Temperature of Deflection under Load - Part 3: High Strength Thermosetting Laminates and Long-FibreReinforced Plastics Second Edition
Rolling Bearings - Static Load Ratings Third Edition
Chemistry - Layouts for Standards - Part 2: Methods of Chemical Analysis Second Edition
Chemistry - Layouts for Standards - Part 3: Standard for Molecular Absorption Spectrometry First Edition
Layouts for Standards - Part 4: Standard for Atomic Absorption Spectrometric Analysis First Edition
Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open-Top Cans Second Edition
Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 2: General Use Containers
Second Edition
Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 3: Aerosol Cans Second Edition
Petroleum Measurement Tables - Part 1: Tables Based on Reference Temperatures of 15 Degrees C and 60 Degrees F Second
Edition
Petroleum Measurement Tables - Part 2: Tables Based on a Reference Temperature of 20 Degrees C First Edition
Textile Machinery and Accessories - Spinning Machinery - Definition of Side (Left or Right) First Edition
Textile Machinery and Accessories - Cylindrical Sliver Cans - Part 1: Main Dimensions Fourth Edition
Textile Machinery and Accessories - Cylindrical Sliver Cans - Part 2: Spring Bottoms Third Edition
Textile Machinery and Accessories - Spindle Gauges for Ring-Spinning and Ring-Doubling Frames Second Edition
Textile Machinery and Accessories - Rings and Travellers for Ring Spinning and Ring Doubling Frames - Part 1: T-Rings and Their
Appropriate Travellers First Edition
Textile Machinery and Accessories - Rings and Travellers for Ring Spinning and Ring Doubling Frames - Part 2: HZCH-, HZ- and JRings and Their Appropriate Travellers First Edition
Textile Machinery and Accessories - Spinning Preparatory and Spinning Machinery - Main Dimensions of Coverings for Top Rollers
Third Edition
Aircraft - Gravity Filling Orifices Second Edition
ISO
104
ISO
105-A01
Rolling Bearings - Thrust Bearings - Boundary Dimensions, General Plan Third Edition
Textiles - Tests for Colour Fastness - Part A01: General Principles of Testing Fifth Edition; CEN EN 20105-A03: 1994; CEN EN ISO
105-A01: 1995; CEN EN 20105-A03: 1994; CEN EN ISO 105-A01: 1995
ISO
105-A02
Textiles - Tests for Colour Fastness - Part A02: Grey Scale for Assessing Change in Colour Fourth Edition; Corrigendum 2: 10/1/2005
ISO
105-A03
ISO
105-A04
ISO
ISO
ISO
ISO
105-A05
105-A06
105-A08
105-B01
ISO
ISO
105-B02
105-B03
Textiles - Tests for Colour Fastness - Part A03: Grey Scale for Assessing Staining Fourth Edition; Corrigendum 2: 10/1/2005
Textiles - Tests for Colour Fastness - Part A04: Method for the Instrumental Assessment of the Degree of Staining of Adjacent
Fabrics First Edition
Textiles - Tests for Colour Fastness - Part A05: Instrumental Assessment of Change in Colour for Determination of Grey Scale Rating
First Edition; Corrigendum 1 02/15/1997
Textiles - Tests for Colour Fastness - Part A06: Instrumental Determination of 1/1 Standard Depth of Colour First Edition
Textiles - Tests for Colour Fastness - Part A08: Vocabulary Used in Colour Measurement First Edition
Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light: Daylight Fifth Edition; Amendment 1-1998
Textiles - Tests for Colour Fastness - Part B02: Colour Fastness to Artificial Light: Xenon Arc Fading Lamp Test Fourth Edition;
Amendment 1-1998; Amendment 2-2000
Textiles - Tests for Colour Fastness - Part B03: Colour Fastness to Weathering: Outdoor Exposure Fourth Edition
ISO
105-B04
ISO
105-B05
ISO
ISO
105-B06
105-B08
ISO
ISO
105-C06
105-C07
ISO
105-C08
ISO
ISO
105-C09
105-C10
ISO
Textiles - Tests for Colour Fastness - Part B04: Colour Fastness to Artificial Weathering: Xenon Arc Fading Lamp Test Fourth Edition
Textiles - Tests for Colour Fastness - Part B05: Detection and Assessment of Photochromism Fourth Edition; CEN EN ISO 105-B05:
1995
Textiles - Tests for Colour Fastness - Part B06: Colour Fastness and Ageing to Artificial Light at High Temperatures: Xenon Arc
Fading Lamp Test Second Edition; Amendment 1: 09/01/2002
Textiles - Tests for Colour Fastness - Part B08: Quality Control of Blue Wool Reference Materials 1 to 7 First Edition
Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial Laundering Third Edition; Technical
Corrigendum 1: 02/01/2002; Technical Corrigendum 2: 5/15/2002
Textiles - Tests for Colour Fastness - Part C07: Colour Fastness to Wet Scrubbing of Pigment Printed Textiles First Edition
Textiles - Tests for Colour Fastness - Part C08: Colour Fastness to Domestic and Commercial Laundering Using a Non-Phosphate
Reference Detergent Incorporating a Low Temperature Bleach Activator First Edition; Technical Corrigendum 1: 5/15/2002;
Amendment 1: 5/15/2006
Textiles - Tests for Colour Fastness - Part C09: Colour Fastness to Domestic and Commercial Laundering - Oxidative Bleach
Response Using a Non-Phosphate Reference Detergent Incorporating a Low Temperature Bleach Activator First Edition; Technical
Corrigendum 1: 5/15/2002; Amendment 1: 12/01/2003
Textiles Tests for colour fastness Part C10: Colour fastness to washing with soap or soap and soda First Edition;: 1989
105-C12 CORR 1 Textiles ù Tests for colour fastness ù Part C12: Colour fastness to industrial laundering TECHNICAL CORRIGENDUM 1 First Edition
ISO
105-C12
Textiles Tests for colour fastness Part C12: Colour fastness to industrial laundering First Edition
ISO
105-D01
ISO
105-D02
ISO
105-E01
ISO
105-E02
ISO
105-E03
ISO
ISO
ISO
105-E04
105-E05
105-E06
ISO
ISO
105-E07
105-E08
Textiles - Tests for Colour Fastness - Part D01: Colour Fastness to Dry Cleaning Fourth Edition; CEN EN ISO 105-D01: 1995
Textiles - Tests for Colour Fastness - Part D02: Colour Fastness to Rubbing: Organic Solvents Fourth Edition; CEN EN ISO 105-D02:
1995
Textiles - Tests for Colour Fastness - Part E01: Colour Fastness to Water Fourth Edition; Technical Corrigendum 1: 02/01/2002; CEN
EN ISO 105-E01: 1996
Textiles - Tests for Colour Fastness - Part E02: Colour Fastness to Sea Water Fourth Edition; Technical Corrigendum 1: 02/01/2002;
CEN EN ISO 105-E02: 1996
Textiles - Tests for Colour Fastness - Part E03: Colour Fastness to Chlorinated Water (Swimming-Pool Water) Third Edition; CEN EN
ISO 105-E03: 1996
Textiles - Tests for Colour Fastness - Part E04: Colour Fastness to Perspiration Fourth Edition; Technical Corrigendum 1:
02/01/2002; CEN EN ISO 105-E04: 1996
Textiles - Tests for Colour Fastness - Part E05: Colour Fastness to Spotting: Acid Fourth Edition
Textiles Tests for colour fastness Part E06: Colour fastness to spotting: Alkali Fourth Edition
Textiles - Tests for Colour Fastness - Part E07: Colour Fastness to Spotting: Water Third Edition; Technical Corrigendum 1:
02/01/2002
Textiles - Tests for Colour Fastness - Part E08: Colour Fastness to Hot Water Third Edition; CEN EN ISO 105-E08: 1996
ISO
ISO
ISO
105-E09
105-E10
105-E11
ISO
105-E12
Textiles - Tests for Colour Fastness - Part E09: Colour Fastness to Potting Third Edition; Technical Corrigendum 1: 02/01/2002
Textiles - Tests for Colour Fastness - Part E10: Colour Fastness to Decatizing Third Edition; CEN EN ISO 105-E10: 1996
Textiles - Tests for Colour Fastness - Part E11: Colour Fastness to Steaming Third Edition
Textiles - Tests for Colour Fastness - Part E12: Colour Fastness to Milling: Alkaline Milling Third Edition; Technical Corrigendum 1:
02/01/2002; Amendment 1: 11/15/2002
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
105-E13
105-E14
105-E16
105-F
105-F01
105-F03
105-F04
105-F05
105-F06
105-F07
105-F10
Textiles - Tests for Colour Fastness - Part E13: Colour Fastness to Acid-Felting: Severe Third Edition; Corrigendum 1: 06/01/1999
Textiles - Tests for Colour Fastness - Part E14: Colour Fastness to Acid-Felting: Mild Third Edition
Textiles Tests for colour fastness Part E16: Colour fastness to water spotting on upholstery fabrics First Edition
Textiles - Tests for Colour Fastness - Part F: Standard Adjacent Fabrics Third Edition
Textiles - Tests for Colour Fastness - Part F01: Specification for Wool Adjacent Fabric First Edition
Textiles - Tests for Colour Fastness - Part F03: Specification for Polyamide Adjacent Fabric First Edition
Textiles - Tests for Colour Fastness - Part F04: Specification for Polyester Adjacent Fabric First Edition
Textiles - Tests for Colour Fastness - Part F05: Specification for Acrylic Adjacent Fabric First Edition
Textiles - Tests for Colour Fastness - Part F06: Specification for Silk Adjacent Fabric First Edition
Textiles - Tests for Colour Fastness - Part F07: Specification for Secondary Acetate Adjacent Fabric First Edition
Textiles - Tests for Colour Fastness - Part F10: Specification for Adjacent Fabric: Multifibre First Edition
ISO
ISO
ISO
105-G01
105-G02
105-G03
ISO
ISO
105-G04
105-J01
ISO
105-J02
ISO
105-J03
ISO
105-J05
ISO
105-N01
ISO
105-N02
ISO
ISO
ISO
105-N03
105-N04
105-N05
ISO
ISO
105-P01
105-P02
ISO
105-S01
ISO
105-S02
ISO
105-S03
ISO
105-X01
ISO
ISO
ISO
105-X02
105-X04
105-X05
Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen Oxides Second Edition; Corrigendum 1-1995; CEN EN
ISO 105-G01: 1995
Textiles - Tests for Colour Fastness - Part G02: Colour Fastness to Burnt-Gas Fumes Second Edition; Corrigendum 1-1995
Textiles - Tests for Colour Fastness - Part G03: Colour Fastness to Ozone in the Atmosphere Second Edition
Textiles - Tests for Colour Fastness Part G04: Colour Fastness to Oxides of Nitrogen in the Atmosphere at High Humidities First
Edition
Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface Colour Fourth Edition
Textiles - Tests for Colour Fastness - Part J02: Instrumental Assessment of relative Whiteness Second Edition; Technical
Corrigendum 1-1998
Textiles Tests for colour fastness Part J03: Calculation of colour differences First Edition; Technical Corrigendum 1: 06/01/1996;
Technical Corrigendum 2: 04/01/2006
Textiles ù Tests for colour fastness ù Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with
change in illuminant (CMCCON02 First Edition
Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: Hypochlorite Second Edition; DIN EN 20105-N01:
1995
Textiles - Tests for Colour Fastness - Part N02: Colour Fastness to Bleaching: Peroxide Second Edition; CEN EN ISO 105-N02: 1995
Textiles - Tests for Colour Fastness - Part N03: Colour Fastness to Bleaching: Sodium Chlorite (Mild) Second Edition; CENELEC EN
ISO 105-N04: 1995
Textiles - Tests for Colour Fastness - Part N04: Colour Fastness to Bleaching: Sodium Chlorite (Severe) Second Edition
Textiles - Tests for Colour Fastness - Part N05: Colour Fastness to Stoving Second Edition; CEN EN ISO 105-N05: 1995
Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing) Second Edition; CEN EN ISO 105P01: 1995
Textiles - Tests for colour fastness - Part P02: Colour fastness to pleating: Steam pleating Third Edition
Textiles - Tests for Colour Fastness - Part S01: Colour Fastness to Vulcanization: Hot Air Second Edition; CEN EN ISO 105-S01:
1995
Textiles - Tests for Colour Fastness - Part S02: Colour Fastness to Vulcanization: Sulfur Monochloride Second Edition; CEN EN ISO
105-S02: 1995
Textiles - Tests for Colour Fastness - Part S03: Colour Fastness to Vulcanization: Open Steam Second Edition; CEN EN ISO 105S03: 1995
Textiles - Tests for Colour Fastness - Part X01: Colour Fastness to Carbonizing: Aluminium Chloride Fourth Edition; CEN EN ISO
105-X01: 1995
Textiles - Tests for Colour Fastness - Part X02: Colour Fastness to Carbonizing: Sulfuric Acid Fourth Edition; CEN EN ISO 105-X02:
1995
Textiles - Tests for Colour Fastness - Part X04: Colour Fastness to Mercerizing Fourth Edition
Textiles - Tests for Colour Fastness - Part X05: Colour Fastness to Organic Solvents Fourth Edition
ISO
ISO
ISO
105-X06
105-X07
105-X08
Textiles - Tests for Colour Fastness - Part X06: Colour Fastness to Soda Boiling Fourth Edition
Textiles - Tests for Colour Fastness - Part X07: Colour Fastness to Cross-Dyeing: Wool Fourth Edition
Textiles - Tests for Colour Fastness - Part X08: Colour Fastness to Degumming Fourth Edition
ISO
105-X09
ISO
105-X10
Textiles - Tests for Colour Fastness - Part X09: Colour Fastness to Formaldehyde Fourth Edition; CEN EN ISO 105-X09: 1995
Textiles - Tests for Colour Fastness - Part X10: Assessment of Migration of Textile Colours into Polyvinyl Chloride Coatings Fourth
Edition; CEN EN ISO 105-X10: 1995
ISO
105-X11
ISO
105-X12
ISO
105-X13
ISO
ISO
ISO
105-X14
105-X16
105-X18
ISO
105-Z01
ISO
ISO
ISO
ISO
ISO
105-Z02
105-Z03
105-Z04
105-Z05
105-Z06
ISO
105-Z07
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
105-Z08
105-Z09
105-Z10
105-Z11
108
109
113
115
Textiles - Tests for Colour Fastness - Part X11: Colour Fastness to Hot Pressing Fourth Edition; CEN EN ISO 105-X11: 1996
Textiles - Tests for Colour Fastness - Part X12: Colour Fastness to Rubbing Fifth Edition; Replaces GME 60330 [Replaced: GME
GME 60330]
Textiles - Tests for Colour Fastness - Part X13: Colour Fastness of Wool Dyes to Processes Using Chemical Means for Creasing,
Pleating and Setting Fourth Edition
Textiles - Tests for Colour Fastness - Part X14: Colour Fastness to Acid Chlorination of Wool: Sodium Dichloroisocyanurate Third
Edition
Textiles - Tests for Colour Fastness - Part X16: Colour Fastness to Rubbing - Small Areas First Edition
Textiles ù Tests for colour fastness ù Part X18: Assessment of the potential to phenolic yellowing of materials First Edition
Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium Salts Second Edition; CEN EN
ISO 105-Z01: 1995
Textiles - Tests for Colour Fastness - Part Z02: Colour Fastness to Metals in the Dye-Bath: Iron and Copper Second Edition; CEN EN
ISO 105-Z02: 1995
Textiles - Tests for Colour Fastness - Part Z03: Intercompatibility of Basic Dyes for Acrylic Fibres First Edition
Textiles - Tests for Colour Fastness - Part Z04: Dispersibility of Disperse Dyes First Edition
Textiles - Tests for Colour Fastness - Part Z05: Determination of the Dusting Behaviour of Dyes First Edition
Textiles - Tests for Colour Fastness - Part Z06: Evaluation of Dye and Pigment Migration First Edition
Textiles - Tests for Colour Fastness Part Z07: Determination of Application Solubility and Solution Stability of Water-Soluble Dyes
First Edition
Textiles - Tests for Colour Fastness Part Z08: Determination of Solubility and Solution Stability of Reactive Dyes in the Presence of
Electrolytes First Edition
Textiles - Tests for Colour Fastness Part Z09: Determination of Cold Water Solubility of Water-Soluble Dyes First Edition
Textiles - Tests for Colour Fastness - Part Z10: Determination of Relative Colour Strength of Dyes in Solution First Edition
Textiles - Tests for Colour Fastness - Part Z11: Evaluation of Speckiness of Colorant Dispersions First Edition
Textile Machinery and Accessories - Weaving Looms - Definition of Left and Right Sides First Edition
Textile Machinery - Working Widths of Weaving Machines First Edition
Rolling Bearings - Plummer Block Housings - Boundary Dimensions Second Edition
Unalloyed Aluminium Ingots for Remelting - Classification and Composition First Edition
ISO
119
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
120
123
124
125
126
127
128-1
128-20
128-21
ISO
ISO
ISO
ISO
128-22
128-23
128-24
128-25
ISO
ISO
ISO
128-30
128-34
128-40
ISO
128-44
ISO
ISO
128-50
129-1
ISO
ISO
ISO
132
137
139
ISO
140-1
ISO
140-2
Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Phenols - Iodometric Method First Edition;
Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Ammonia and Ammonium Compounds - Colorimetric Comparison
Method First Edition
Rubber Latex - Sampling Third Edition
Latex, Rubber - Determination of Total Solids Content Fourth Edition; Amendment 1: 2/01/2006
Natural Rubber Latex Concentrate - Determination of Alkalinity Fifth Edition
Natural rubber latex concentrate Determination of dry rubber content Fifth edition
Rubber, Natural Latex Concentrate - Determination of KOH Number Third Edition: Amendment 1: 02/01/2006
Technical Drawings - General Principles of Presentation - Part 1: Introduction and Index First Edition
Technical Drawings - General Principles of Presentation - Part 20: Basic Conventions for Lines First Edition
Technical Drawings - General Principles of Presentation - Part 21: Preparation of Lines by CAD Systems First Edition
Technical Drawings - General Principles of Presentation - Part 22: Basic Conventions and Applications for Leader Lines and
Reference Lines First Edition
Technical Drawings - General Principles of Presentation - Part 23: Lines on Construction Drawings First Edition
Technical Drawings - General Principles of Presentation - Part 24: Lines on Mechanical Engineering Drawings First Edition
Technical Drawings - General Principles of Presentation - Part 25: Lines on Shipbuilding Drawings First Edition
Technical Drawings - General Principles of Presentation - Part 30: Basic Conventions for Views First Edition; Cancels and Replaces
ISO 128:1982
Technical Drawings - General Principles of Presentation - Part 34: Views on Mechanical Engineering Drawings First Edition
Technical Drawings - General Principles of Presentation - Part 40: Basic Conventions for Cuts and Sections First Edition
Technical Drawings - General Principles of Presentation - Part 44: Sections on Mechanical Engineering Drawings First Edition;
Cancels and Replaces ISO 128:1982
Technical Drawings - General Principles of Presentation - Part 50: Basic Conventions for Representing Areas on Cuts and Sections
First Edition; Cancels and Replaces ISO 128:1982
Technical drawings Indication of dimensions and tolerances Part 1: General principles First Edition; Supersedes ISO 129
Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) Fourth Edition; Replaces ISO
133:1983
Wool - Determination of Fiber Diameter - Projection Microscope Method First Edition
Textiles - Standard Atmospheres for Conditioning and Testing Second Edition
Acoustics Measurement of sound insulation in buildings and of building elements Part 1: Requirements for laboratory test facilities
with suppressed flanking transmission AMENDMENT 1: Specific requirements on the frame of the test opening for lightweight twin
leaf partitions Third Edition; Amendment 1: 12/1/2004
Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 2: Determination, Verification and
Application of Precision Data Second Edition; CEN EN 20140-2: 1993; Corrigendum-1993
ISO
140-3
ISO
140-4
ISO
140-5
ISO
140-6
ISO
140-7
ISO
140-8
ISO
140-9
ISO
140-10
ISO
140-11
ISO
140-14 CORR 1
ISO
140-14
ISO
140-16
ISO
ISO
ISO
ISO
140-18
141
142
143
ISO
148-1
ISO
148-2
Acoustics Measurement of sound insulation in buildings and of building elements Part 3: Laboratory measurements of airborne
sound insulation of building elements AMENDMENT 1: Installation guidelines for lightweight twin leaf partitions Second Edition;
Amendment 1: 12/1/2004
Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 4: Field Measurements of Airborne Sound
Insulation between Rooms SEcond Edition
Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 5: Field Measurements of Airborne Sound
Insulation of Facade Elements and Facades Second Edition
Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 6: Laboratory Measurements of Impact
Sound Insulation of Floors Second Edition
Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 7: Field Measurements of Impact Sound
Insulation of Floors Second Edition
Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 8: Laboratory Measurements of the
Reduction of Transmitted Impact Noise by Floor Coverings on a Heavyweight Standard Floor Second Edition
Acoustics - Measurements of Sound Insulation in Buildings and of Building Elements - Part 9: Laboratory Measurement of Room-toRoom Airborne Sound Insulation of a Suspended Ceiling with a Plenum Above It First Edition; CEN EN 20140-9: 1993
Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 10: Laboratory Measurement of Airborne
Sound Insulation of Small Building Elements First Edition
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the
reduction of transmitted impact sound by floor coverings on lightweight reference floors First edition
Acoustics Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the
field First Edition
Acoustics Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the
field First Edition
Acoustics Measurement of sound insulation in buildings and of building elements Part 16: Laboratory measurement of the sound
reduction index improvement by additional lining First Edition
Acoustics Measurement of sound insulation in buildings and of building elements Part 18: Laboratory measurement of sound
generated by rainfall on building elements First Edition
Textile Machinery and Accessories - Pirn Winders and Cross Winders - Definition of Left and Right Sides First Edition
Textile Machinery and Accessories - Weaving Preparatory Machines - Definition of Left and Right Sides First Edition
Textile Machinery and Accessories - Weft Pirns for Automatic Looms First Edition
Metallic materials Charpy pendulum impact test Part 1: Test method First Edition; Supersedes ISO 148:1983 and ISO 83:1976
Metallic Materials - Charpy Pendulum Impact Test - Part 2: Verification of Test Machines First Edition; Cancels and Replaces ISO/R
442: 1965
Metallic Materials - Charpy Pendulum Impact Test - Part 3: Preparation and Characterization of Charpy V Reference Test Pieces for
Verification of Test Machines First Edition
Raw, Refined and Boiled Linseed Oil for Paints and Varnishes - Specifications and Methods of Test Second Edition
Belt Drives - Pulleys - Limiting Values for Adjustment of Centres Third Edition
Coal - Determination of Forms of Sulfur Second Edition
Thermoplastics Pipes for the Conveyance of Fluids - Nominal Pressures - Part 1: Metric Series Third Edition
Thermoplastics Pipes for the Conveyance of Fluids - Nominal Outside Diameters and Nominal Pressures - Part 2: Inch-Based Series
Second Edition
Cinematography - Head Gaps and Sound Records for Three-, Four-, or Six-Track Magnetic Sound Records on 35 mm and SingleTrack on 17,5 mm Motion-Picture Film Containing No Picture - Positions and Width Dimensions Second Edition; Replaces ISO 360:
1975
Plastics - Determination of Bulk Factor of Moulding Materials First Edition
Plastics - Phenol - Formaldehyde Mouldings - Detection of Free Ammonia First Edition
Plastics - Methods of Test for the Determination of the Effects of Immersion in Liquid Chemicals Second Edition
Plastics - Determination of Loss of Plasticizers - Activated Carbon Method Second Edition
Plastics - Determination of Migration of Plasticizers Second Edition
Plastics - Determination of Flexural Properties Fourth Edition; Amendment 1: 02/15/2004
ISO
ISO
ISO
ISO
ISO
148-3
150
155
157
161-1
ISO
161-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
162
171
172
175
176
177
178
ISO
179-1
ISO
ISO
179-2
180
Plastics - Determination of Charpy Impact Properties - Part 1: Non-Instrumented Impact Test First Edition; Amendment 1: 7/15/2005
Plastics - Determination of Charpy Impact Properties - Part 2: Instrumented Impact Test First Edition; Technical Corrigendum 1: 1115-1998
Plastics - Determination of Izod Impact Strength Third Edition; Amendment 1: 12/1/2006
ISO
182-1
Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to
Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 1: Congo Red Method First Edition
ISO
182-2
Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to
Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 2: pH Method First Edition
ISO
182-3
Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to
Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 3: Conductometric Method First Edition
ISO
ISO
ISO
182-4
185
186
Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to
Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 4: Potentiometric Method First Edition
Grey Cast Iron - Classification Second Edition
Paper and Board - Sampling to Determine Average Quality Fourth Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
187
188
196
197-1
197-2
197-3
197-4
197-5
199
204
209
212
214
215
ISO
216
ISO
217
ISO
ISO
225
226
ISO
228-1
ISO
ISO
228-2
229
ISO
230-1
ISO
ISO
ISO
ISO
230-2
230-3
230-4
230-5
ISO
230-6
Paper, Board and Pulps - Standard Atmosphere for Conditioning and Testing and Procedure for Monitoring the Atmosphere and
Conditioning of Samples Second Edition; CEN EN 20187: 1993; PNS 304: 1990
Rubber, Vulcanized or Thermoplastic - Accelerated Ageing and Heat Resistance Tests Fourth Edition
Wrought Copper and Copper Alloys - Detection of Residual Stress - Mercury (I) Nitrate Test First Edition
Copper and Copper Alloys - Terms and Definitions - Part 1: Materials First Edition
Copper and Copper Alloys - Terms and Definitions - Part 2: Unwrought Products (Refinery Shapes) First Edition
Copper and Copper Alloys - Terms and Definitions - Part 3: Wrought Products First Edition
Copper and Copper Alloys - Terms and Definitions - Part 4: Castings First Edition
Copper and Copper Alloys - Terms and Definitions - Part 5: Methods of Processing and Treatment First Edition
Rolling Bearings - Thrust Bearings - Tolerances Third edition
Metallic Materials - Uninterrupted Uniaxial Creep Testing in Tension - Method of Test First Edition
Title not available [Cancelled: ISO 209-1, ISO 209-2]
Essential Oils - Sampling Second Edition
Documentation - Abstracts for Publications and Documentation First Edition
Documentation - Presentation of Contributions to Periodicals and Other Serials First Edition
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction Second
Edition
Paper - Untrimmed Sizes - Designation and Tolerances for Primary and Supplementary Ranges, and Indication of Machine Direction
Second Edition
Fasteners - Bolts, Screws, Studs and Nuts - Symbols and Designations of Dimensions Second Edition; Corrected and Reprinted
7/15/1992
Acoustics Normal equal-loudness-level contours Second edition; Supersedes NZS ISO 226: 1987
Pipe Threads Where Pressure-Tight Joints Are Not Made on the Threads - Part 1: Dimensions, Tolerances and Designation Fourth
Edition
Pipe Threads Where Pressure-Tight Joints Are Not Made on the Threads - Part 2: Verification by Means of Limit Gauges Second
Edition
Machine Tools - Speeds and Feeds First Edition
Test Code for Machine Tools - Part 1: Geometric Accuracy of Machines Operating under No-Load or Finishing Conditions Second
Edition
Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes Third
Edition
Test Code for Machine Tools - Part 3: Determination of Thermal Effects Second Edition
Test code for machine tools Part 4: Circular tests for numerically controlled machine tools Second Edition
Test Code for Machine Tools - Part 5: Determination of the Noise Emission First Edition
Test code for machine tools Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
First edition
ISO
ISO
230-7
233
ISO
233-2
ISO
ISO
ISO
233-3
234-1
234-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
235
236-1
236-2
237
238
239
240
241
242
243
244
245
246
247
248
249
251
252
ISO
ISO
ISO
ISO
252-1
254
255
257
ISO
259
ISO
259-2
Test code for machine tools Part 7: Geometric accuracy of axes of rotation First edition
Documentation - Transliteration of Arabic Characters into Latin Characters First Edition
Information and Documentation - Transliteration of Arabic Characters - into Latin Characters - Part 2: Arabic Language - Simplified
Transliteration First Edition
Information and Documentation - Transliteration of Arabic Characters into Latin Characters - Part 3: Persian Language - Simplified
Transliteration First Edition
Files and Rasps - Part 1: Dimensions
Files and Rasps - Part 2: Characteristics of Cut First Edition
Parallel Shank Jobber and Stub Series Drills and Morse Taper Shank Drills Second Edition; Amendment Slip-1981; Corrigendum 11996
Hand Reamers First Edition; Amendment 1: 2/15/1977
Long Fluted Machine Reamers, Morse Taper Shanks First Edition; Amendment 1: 2/15/1977
Rotating Tools with Parallel Shanks - Diameters of Shanks and Sizes of Driving Squares First Edition
Reduction Sleeves and Extension Sockets for Tools with Morse Taper Shanks First Edition
Drill Chuck Tapers Second Edition
Milling Cutters - Interchangeability Dimensions for Cutter Arbors or Cutter Mandrels Second Edition
Shanks for Turning and Planing Tools - Shapes and Dimensions of the Section Second Edition
Carbide Tips for Brazing on Turning Tools First Edition
Turning Tools with Carbide Tips - External Tools
Aircraft - Sealing Wire First Edition
Aircraft - Lockwire - Diameters Second Edition
Rolling bearings ù Cylindrical roller bearings, separate thrust collars ù Boundary dimensions Third Edition
Rubber - Determination of Ash Fourth Edition
Rubbers, raw - Determination of volatile-matter content Fourth Edition
Rubber, Raw Natural - Determination of Dirt Content Third Edition
Conveyor belts with textile carcass Widths and lengths Third Edition
Conveyor belts ù Adhesion between constitutive elements ù Test methods Third Edition
Textile Conveyor Belts - Adhesive Strength between Constitutive Elements - Part 1: Methods of Test First Edition; Partially Replaces
ISO 252: 1988; Corrigendum 1: 11/15/2006
Belt Drives - Pulleys - Quality, Finish and Balance Third Edition
Belt Drives - Pulleys for V-Belts (System Based on Datum Width) - Geometrical Inspection of Grooves Second Edition
Pesticides and other agrochemicals Principles for the selection of common names Third Edition
Documentation - Transliteration of Hebrew Characters into Latin Characters First Edition; Cancels and Replaces ISO R 259-1962
Information and Documentation - Transliteration of Hebrew Characters into Latin Characters - Part 2: Simplified Transliteration First
Edition; Corrected and Reprinted - 1995
ISO
ISO
261
262
ISO General Purpose Metric Screw Threads - General Plan Second Edition
ISO General Purpose Metric Screw Threads - Selected Sizes for Screws, Bolts and Nuts Second Edition
ISO
263
ISO
264
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
265-1
266
268
269
272
273
276
277
279
280
281
282
ISO
ISO
283
284
ISO
286-1
ISO
ISO
286-2
287
ISO
289-1
ISO
289-2
ISO
289-3
ISO
ISO
289-4
291
ISO Inch Screw Threads - General Plan and Selection for Screws, Bolts and Nuts - Diameter Range 0,06 to 6 in First Edition
Unplasticized Polyvinyl Chloride (PVC) Fittings with Plain Sockets for Pipes under Pressure - Laying Length - Metric Series First
Edition; Addendum 1-1982
Pipes and Fittings of Plastics Materials - Fittings for Domestic and Industrial Waste Pipes - Basic Dimensions: Metric Series - Part 1:
Unplasticized Poly(Vinyl Chloride) (PVC-U) First Edition
Acoustics - Preferred Frequencies Second Edition
Aircraft - Mechanical and Electromechanical Indicators - General Requirements First Edition
Correspondence Envelopes - Designation and Sizes Second Edition; PNS 319: 1989
Fasteners - Hexagon Products - Widths Across Flats Second Edition
Fasteners - Clearance Holes for Bolts and Screws First Edition; Amendment Slip-1979; NZS/ISO 273: 1979
Binders for Paints and Varnishes - Linseed Stand Oil - Requirements and Methods of Test Second Edition
Binders for Paints and Varnishes - Raw Tung Oil - Requirements and Methods of Test Second Edition
Essential Oils - Determination of Relative Density at 20 Degrees C - Reference Method second Edition
Essential Oils - Determination of Refractive Index Second Edition
Rolling bearings ù Dynamic load ratings and rating life Second Edition
Conveyor Belts - Sampling Second Edition
Textile conveyor belts ù Full thickness tensile strength, elongation at break and elongation at the reference load ù Test method Third
Edition [Superseded: ISO 283-1, ISO 283-1]
Conveyor Belts - Electrical Conductivity - Specification and Test Method Third Edition
ISO System of Limits and Fits - Part 1: Bases of Tolerances, Deviations and Fits First Edition; CEN EN 20286-1: 1993; NZS/ISO
286.1: 1988
ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts First Edition;
Technical Corrigendum 1: 09/15/2006
Paper and Board - Determination of Moisture Content - Oven-Drying Method Second Edition; CEN EN 20287: 1994
Rubber, Unvulcanized - Determinations Using a Shearing-Disc Viscometer - Part 1: Determination of Mooney Viscosity Second
edition
Rubber, Unvulcanized - Determinations Using a Shearing-Disc Viscometer - Part 2: Determination of Pre-Vulcanization
Characteristics First Edition
Rubber, Unvulcanized - Determinations Using a Shearing-Disc Viscometer - Part 3: Determination of the Delta Mooney Value for NonPigmented, Oil-Extended, Emulsion-Polymerized SBR First Edition
Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 4: Determination of the Mooney stress-relaxation rate
First Edition; Corrected Version: 03/01/2004
Plastics Standard atmospheres for conditioning and testing Third Edition
ISO
293
Plastics Compression moulding of test specimens of thermoplastic materials Third Edition
ISO
294-1
ISO
294-2
ISO
ISO
294-3 AMD 1
294-3
ISO
294-4
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
294-5
295
296
297
298
299
301
302
ISO
ISO
303 CORR 1
303
ISO
304
ISO
ISO
ISO
305
306
307
ISO
308
ISO
310
Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates AMENDMENT 1 Second Edition
Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates Second Edition
Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 4: Determination of Moulding Shrinkage Second
Edition
Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 5: Preparation of Standard Specimens for
Investigating Anisotropy First Edition; Technical Corrigendum 1: 3/15/2003; Amendment 1: 05/01/2004
Plastics - Compression Moulding of Test Specimens of Thermosetting Materials Third Edition
Machine Tools - Self-Holding Tapers for Tool Shanks Second Edition
7/24 Tapers for Tool Shanks for Manual Changing Second Edition
Machine Tools - Lathe Centres - Sizes for Interchangeability First Edition
Machine Tool Tables - T-Slots and Corresponding Bolts Second Edition
Zinc Alloy Ingots Intended for Casting Second Edition
Pulps Determination of Kappa number Second Edition
Road vehicles ù Installation of lighting and light signalling devices for motor vehicles and their trailers TECHNICAL CORRIGENDUM
1 Second Edition
Road vehicles ù Installation of lighting and light signalling devices for motor vehicles and their trailers Second Edition
Surface Active Agents - Determination of Surface Tension by Drawing up Liquid Films Second Edition; Technical Corrigendum 11998
Plastics - Determination of Thermal Stability of Poly(Vinyl Chloride), Related Chlorine-Containing Homopolymers and Copolymers
and Their Compounds - Discoloration Method Second Edition
Plastics Thermoplastic materials Determination of Vicat softening temperature (VST) Fourth Edition
Plastics ù Polyamides ù Determination of viscosity number Fifth Edition
Plastics - Phenolic Moulding Materials - Determination of Acetone-Soluble Matter (Apparent Resin Content of Material in the
Unmoulded State) Third Edition
Manganese Ores and Concentrates - Determination of Hygroscopic Moisture Content in Analytical Samples - Gravimetric Method
Third Edition
ISO
ISO
312
314
Manganese Ores - Determination of Active Oxygen Content, Expressed as Manganese Dioxide - Titrimetric Method Third Edition
Manganese Ores - Determination of Carbon Dioxide Content - Gravimetric Method Second Edition
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose
and bar test specimens First Edition; Supersedes ISO 294: 1995; Amendment 1: 01-15-2001; Amendment 2: 09-01-2005
Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 2: Small Tensile Bars First Edition; Supersedes ISO
294: 1995; Amendment 1: 05/15/2004
Manganese Ores and Concentrates - Determination of Nickel Content - Dimethylglyoxime Spectrometric Method and Flame Atomic
Absorption Spectrometric Method First Edition
Manganese Ores - Determination of Cobalt Content - Nitroso-R-Salt Photometric Method Second Edition
Manganese Ores and Concentrates - Determination of Arsenic Content - Spectrometric Method First Edition
Manganese Ores - Determination of Sulphur Content - Barium Sulphate Gravimetric Methods and Sulphur Dioxide Titrimetric Method
After Combustion Second Edition
Coal - Determination of Nitrogen - Semi-Micro Kjeldahl Method Fourth Edition; Corrigendum 1-1996
Solid Mineral Fuels - Determination of Total Sulfur - Eschka Method Second Edition
Road Vehicles - 50 Semi-Trailer Fifth Wheel Coupling Pin - Basic and Mounting/Interchangeability Dimensions Second Edition;
Corrigendum 1-1990
Conveyor belts Laboratory scale flammability characteristics Requirements and test method Third Edition
Textile Machinery and Accessories - Worsted and Woollen Cards - Width of Cylinder and Width on the Wire Second Edition
Textile Machinery and Accessories - Spinning Machines - Flyer Bobbins First Edition
Hard Coal - Audibert-Arnu Dilatometer Test First Edition
ISO
ISO
ISO
315
316
317
ISO
ISO
ISO
320
333
334
ISO
ISO
ISO
ISO
ISO
337
340
342
344
349
ISO
ISO
ISO
ISO
ISO
ISO
351
354
355
356
359
361
ISO
362-1
ISO
363-1
ISO
ISO
ISO
ISO
363-2
364
365
366-1
ISO
366-2
ISO
366-3
Solid Mineral Fuels - Determination of Total Sulfur - High Temperature Combustion Method Third Edition; Corrigendum 1-1996
Acoustics Measurement of sound absorption in a reverberation room Second Edition
Rolling bearings ù Tapered roller bearings ù Boundary dimensions and series designations Second Edition
Essential Oils - Preparation of Test Samples Second Edition
Cinematography - Projectable Image Area on 16 mm Motion-Picture Prints - Dimensions and Location Second Edition
Basic Ionizing Radiation Symbol First Edition
Measurement of noise emitted by accelerating road vehicles ù Engineering method ù Part 1: M and N categories First Edition
[Cancelled: ISO 362, ISO 362, ISO 7188]
Textile machinery and accessories - Flat steel healds with closed end loops - Part 1: Dimensions of healds manufactured of rolled
steel wire First Edition;:1992
Textile machinery and accessories Flat steel healds with closed end loops Part 2: Dimensions of healds manufactured of hardened
strip steel First Edition
Textile Machinery and Accessories - Twin Wire Healds for Weaving Machines with Heald Frames First Edition
Textile Machinery and Accessories - Twin Wire Healds with Inset Mail for Jacquard Weaving Second Edition
Textile Machinery and Accessories - Reeds - Part 1: Pitch Bound Reeds - Dimensions First Edition
Textile Machinery and Accessories - Reeds - Part 2: Metal Reeds with Plate Baulk - Dimensions and Designation First Edition;
Replaces ISO 367: 1976
Textile Machinery and Accessories - Reeds - Part 3: Metal Reeds with Double-Spring Baulk - Dimensions and Designation First
Edition
ISO
366-4
Textile machinery and accessories - Reeds - Part 4: Dimensions and designation of plasticbound metal reeds Second edition
ISO
366-5
ISO
368
ISO
376
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
377
378
379
383
384
385
386
387
ISO
389-1
ISO
389-2
ISO
389-3
ISO
389-4
ISO
389-5
ISO
389-6
ISO
389-7
ISO
ISO
ISO
ISO
ISO
ISO
ISO
389-8
390
404
406
407
413
415
Textile machinery and accessories Reeds Part 5: Dimensions and designation of profile capsules First Edition
Spinning Preparatory, Spinning and Doubling (Twisting) Machinery - Tubes for Ring-Spinning, Doubling and Twisting Spindles, Taper
1:38 and 1:64 Fourth Edition
Metallic Materials - Calibration of Force-Proving Instruments Used for the Verification of Uniaxial Testing Machines Third Edition
Steel and Steel Products - Location and Preparation of Samples and Test Pieces for Mechanical Testing Second Edition;
Corrigendum 1 09-15-1997
Gymnastic Equipment - Parallel Bars First Edition
Gymnastic Equipment - Horizontal Bar First Edition
Laboratory Glassware - Interchangeable Conical Ground Joints First Edition
Laboratory Glassware - Principles of Design and Construction of Volumetric Glassware First Edition
Laboratory glassware Burettes First Edition; Replaces ISO 385-1:1984, ISO 385-2:1984, ISO 385-3:1984
Liquid-in-Glass Laboratory Thermometers - Principles of Design, Construction and Use First Edition;
Hydrometers - Principles of Construction and Adjustment First Edition;
Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 1: Reference Equivalent Threshold Sound Pressure
Levels for Pure Tones and Supra-Aural Earphones First Edition
Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 2: Reference Equivalent Threshold Sound Pressure
Levels for Pure Tones and Insert Earphones First Edition
Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 3: Reference Equivalent Threshold Force Levels for
Pure Tones and Bone Vibrators First Edition; Corrigendum 1-1995; AS/NZS 1591.1: 1995
Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 4: Reference Levels for Narrow-Band Masking Noise
First Edition
Acoustics Reference zero for the calibration of audiometric equipment Part 5: Reference equivalent threshold sound pressure levels
for pure tones in the frequency range 8 kHz to 16 kHz First Edition;:1998
Acoustics ù Reference zero for the calibration of audiometric equipment ù Part 6: Reference threshold of hearing for test signals of
short duration First Edition
Acoustics Reference zero for the calibration of audiometric equipment Part 7: Reference threshold of hearing under free-field and
diffuse-field listening conditions Second Edition
Acoustics Reference zero for the calibration of audiometric equipment Part 8: Reference equivalent threshold sound pressure levels
for pure tones and circumaural earphones First Edition
Products in Fibre-Reinforced Cement - Sampling and Inspection Second Edition
Steel and Steel Products - General Technical Delivery Requirements Second Edition
Technical Drawings - Tolerancing of Linear and Angular Dimensions Second Edition
Small Medical Gas Cylinders - Pin-Index Yoke-Type Valve Connections Third Edition
Aircraft - Heads of Lubricating Nipples First Edition
Envelopes, Postcards and Similar Articles - Cancellation Area First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
416
418
420
422
423
424
431
432
433
437
439
ISO
ISO
ISO
ISO
441
445
446
447
ISO
ISO
ISO
ISO
ISO
449
451
456
457
458-1
ISO
ISO
ISO
458-2
461-1
461-2
ISO
463 CORR 1
ISO
ISO
463
464
ISO
ISO
ISO
ISO
466
472
476
477
Picture Postcards - Area Reserved for the Address First Edition
Photography - Processing Chemicals - Specifications for Anhydrous Sodium Sulfite Third Edition
Photography - Processing Chemicals - Specifications for Potassium Bromide Second Edition
Photography - Processing Chemicals - Specifications for p-Menthylaminophenol Sulfate Second Edition
Photography - Processing Chemicals - Specifications for Hydroquinone Second Edition
Photography - Processing Chemicals - Specifications for Anhydrous Sodium Carbonate Monohydrate Second Edition
Copper Refinery Shapes Second Edition
Ply Type Conveyor Belts - Characteristics of Construction Second Edition
Conveyor Belts - Marking Second Edition, Amendment 1: 01/15/2006
Steel and Cast Iron - Determination of Total Carbon Content - Combustion Gravimetric Method First Edition
Steel and Cast Iron - Determination of Total Silicon Content - Gravimetric Method Second Edition
Textile Machinery and Accessories - Drop Wires for Warp Stop Motions for Weaving Machines without Automatic Drawing-In Second
Edition
Pallets for Materials Handling - Vocabulary Second Edition
Micrographics ISO character and ISO test chart No. 1 Description and use Third Edition
Machine Tools - Direction of Operation of Controls Second Edition
Ships and Marine Technology - Magnetic Compasses, Binnacles and Azimuth Reading Devices - Class A Second Edition; Corrected
and Reprinted 04/01/1999
Aircraft - Pressure Re-Oiling Connection First Edition; Erratum-1980
Surface Active Agents - Analysis of Soaps - Determination of Free Caustic Alkali First Edition
Soaps - Determination of Chloride Content - Titrimetric Method Second Edition
Plastics - Determination of Stiffness in Torsion of Flexible Materials - Part 1: General Method First Edition
Plastics - Determination of Stiffness in Torsion of Flexible Materials - Part 2: Application to Plasticized Compounds of Homopolymers
and Copolymers of Vinyl Chloride First Edition
Aircraft - Connectors for Ground Electrical Supplies - Part 1: Design, Performance and Test Requirements Second Edition
Aircraft - Connectors for Ground Electrical Supplies - Part 2: Dimensions First Edition
Geometrical Product Specifications (GPS) ù Dimensional measuring equipment ù Design and metrological characteristics of
mechanical dial gauges CORR 1 First Edition;:1965 [Replaced: ISO R463]
Geometrical Product Specifications (GPS) Dimensional measuring equipment Design and metrological characteristics of
mechanical dial gauges First Edition;:1965 [Replaced: ISO R463]
Rolling Bearings - Radial Bearings with Locating Snap Ring - Dimensions and Tolerances Second Edition
Cinematography - Image Produced by 16mm Motion-Picture Camera Aperture - Position and Dimensions First Edition; Amendment
Slip-1980
Plastics - Vocabulary Plastiques - Vocabulaire Third Edition
Textile Machinery and Accessories - Pirn Winding Machines - Vocabulary First Edition
Textile Machinery and Accessories - Cone and Cheese Winding Machines - Vocabulary First Edition
ISO
482
ISO
483
ISO
484-1
ISO
ISO
ISO
ISO
ISO
ISO
484-2
485
486
487
488
489
ISO
ISO
ISO
ISO
ISO
ISO
490
491
492
493
494
496
ISO
ISO
497
498
ISO
500-1 CORR 1
ISO
500-1
ISO
500-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
500-3
501
502
504
505
506
509
Aircraft - Propulsion Units and Components - Methods of Numbering and Describing Direction of Rotation First Edition
Plastics - Small Enclosures for Conditioning and Testing Using Aqueous Solutions to Maintain Relative Humidity at a Constant Value
Second Edition
Shipbuilding - Ship Screw Propellers - Manufacturing Tolerances - Part 1: Propellers of Diameter Greater Than 2,50 m First Edition
Shipbuilding - Ship Screw Propellers - Manufacturing Tolerances - Part 2: Propellers of Diameter between 0,80 and 2,50 m Inclusive
First Edition
Aircraft Water-Methanol Pressure Connections First Edition; Erratum-1980
Cinematography - 16 mm Motion-Picture Film Perforated 8 mm Type R - Cutting and Perforating Dimensions Third Edition
Steel Roller Chains, Types S and C, Attachments and Sprockets Third Edition
Milk - Determination of Fat Content - Gerber Butyrometers First Edition
Plastics - Determination of the Refractive Index Second Edition
Cinematography - Magnetic Stripes and Magnetic Recording Head Gaps for Sound Record on 16 mm Motion-Picture Film Perforated
Along One Edge (Type 1) - Positions and Width Dimensions Second Edition
Cinematography - 35 mm Motion-Picture Film and Magnetic Film - Cutting and Perforating Dimensions Sixth Edition
Rolling Bearings - Radial Bearings - Tolerances Fourth Edition
Aircraft - Dimensions for Single-Hole Mounting (Class 1 and Class 2) Lever-Operated Manual Switches First Edition
Parallel Shank Twist Drills - Long Series First Edition
Driving and Driven Machines - Shaft Heights First Edition
Guide to the Choice of Series of Preferred Numbers and of Series Containing More Rounded Values of Preferred Numbers First
Edition
Natural Rubber Latex Concentrate - Preparation of Dry Films Second Edition
Agricultural tractors ù Rear-mounted power take-off types 1, 2 and 3 ù Part 1: General specifications, safety requirements,
dimensions for master shield and clearance zone TECHNICAL CORRIGENDUM 1 First Edition
Agricultural tractors ù Rear-mounted power take-off types 1, 2 and 3 ù Part 1: General specifications, safety requirements,
dimensions for master shield and clearance zone First Edition
Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 2: Narrow-track tractors, dimensions for master shield and
clearance zone First Edition; Together With ISO 500-1:2004 and ISO 500-3:2004 Replaces ISO 500:1991
Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 3: Main PTO dimensions and spline dimensions, location of
PTO First Edition; Together With ISO 500-1:2004 and ISO 500-2:2004 Replaces ISO 500:1991
Hard Coal - Determination of the Crucible Swelling Number Third Edition
Coal - Determination of Caking Power - Gray-King Coke Test Second Edition
Turning Tools with Carbide Tips - Designation and Marking First Edition
Conveyor Belts - Method for the Determination of the Tear Propagation Resistance of Textile Conveyor Belts Second Edition
Rubber Latex, Natural, Concentrate - Determination of Volatile Fatty Acid Number Third Edition
Pallet Trucks - Principal Dimensions First Edition; Replaces ISO R509: 1966
ISO
510
ISO
ISO
ISO
513
514
516
ISO
517
ISO
ISO
ISO
ISO
ISO
ISO
518
519
520
521
522
525
ISO
ISO
527-1
527-2
ISO
527-3
ISO
527-4
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
527-5
528
529
530
532
534
535
536
540
542
ISO
ISO
ISO
544
548
549
Red Lead for Paints First Edition
Classification and application of hard cutting materials for metal removal with defined cutting edges Designation of the main groups
and groups of application Third Edition;
Turning Tools with Carbide Tips - Internal Tools First Edition
Photography - Camera Shutters - Timing Third Edition
Photography Apertures and related properties pertaining to photographic lenses Designations and measurements Second Edition;
Technical Corrigendum: 10/01/2006
Photography Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units
Specification Second Edition
Photography - Hand-Held Cameras - Flash-Connector Dimensions Second Edition
Cereals and Pulses - Determination of the Mass of 1000 Grains First Edition
Machine Chucking Reamers with Parallel Shanks or Morse Taper Shanks First Edition
Special Tolerances for Reamers First Edition
Bonded Abrasive Products - General Requirements Third Edition
Plastics - Determination of tensile properties - Part 1: General principles First Edition; Corrigendum 1-1994; Amendment 1: 09-012005
Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics First Edition
Plastics - Determination of Tensile Properties - Part 3: Test Conditions for Films and Sheets First Edition; Technical Corrigendum
1:06-15-1998; Technical Corrigendum 2:04-15-2001
PLastics - Determination of Tensile Properties - Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic
Composites First Edition; Replaces ISO 3268:1978
Plastics - Determination of Tensile Properties - Part 5: Test Conditions for Unidirectional Fibre-Reinforced Plastic Composites First
Edition; Replaces 3268:1978
Refractory Products - Determination of Pyrometric Cone Equivalent (Refractoriness) First Edition
Short Machine Taps and Hand Taps Second Edition
Aircraft - General Purpose Push-Pull Single-Pole Circuit-Breakers - Dimensions First Edition
Acoustics - Method for Calculating Loudness Level First Edition
Paper and Board - Determination of Thickness and Apparent Bulk Density or Apparent Sheet Density Third Edition
Paper and Board - Determination of Water Absorptiveness - Cobb Method Second Edition; CEN EN 20535: 1994
Paper and Board - Determination of Grammage Second Edition
Solid Mineral Fuels - Determination of Fusibility of Ash - High-Temperature Tube Method Third Edition
Oilseeds - Sampling Second Edition; CEN EN ISO 542: 1995
Welding consumables Technical delivery conditions for welding filler materials Type of product, dimensions, tolerances and
markings Third Edition
Manganese Ores - Determination of Barium Oxide Content - Barium Sulphate Gravimetric Method Second Edition
Manganese Ores - Determination of Combined Water Content - Gravimetric Method Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
553
554
556
558
559
561
562
565
567
570
572
575
576
579
ISO
ISO
580
582
ISO
583
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
583-1
584
585
587
589
590
591-1
592
ISO
594-1
ISO
594-2
Manganese Ores - Determination of Vanadium Content - Titrimetric Method and Phosphotungstovanadate Photometric Method
Second Edition
Standard Atmospheres for Conditioning and/or Testing - Specifications First Edition
Coke (Greater Than 20 mm in Size) - Determination of Mechanical Strength First Edition
Conditioning and Testing - Standard Atmospheres - Definitions First Edition
Steel Tubes for Water and Sewage Second Edition
Coal Preparation Plant - Graphical Symbols Second Edition; Corrected and Reprinted - 1992
Hard Coal and Coke - Determination of Volatile Matter Third Edition
Test Sieves - Metal Wire Cloth, Perforated Metal Plate and Electroformed Sheet - Nominal Sizes of Openings Third Edition
Coke - Determination of Bulk Density in a Small Container Second Edition
Textile Machinery and Accessories - Heald Carrying Rods for Healds with ClosedO"-Shaped End Loops First Edition"
Textile Machinery and Accessories - Shuttles for Pirn Changing Automatic Looms - Dimensions First Edition; Erratum-1976
Textile Machinery and Accessories - Transfer Cones - Half Angle of the Cone 4 Degrees 20 Feet First Edition
Textile Machinery and Accessories - Paper Patterns for Dobbies - Dimensions First Edition
Coke - Determination of Total Moisture Third Edition
Plastics piping and ducting systems Injection-moulded thermoplastics fittings Methods for visually assessing the effects of heating
Third Edition
Rolling Bearings - Chamfer Dimensions - Maximum Values Third Edition
Conveyor belts with a textile carcass ù Total belt thickness and thickness of constitutive elements ù Test methods Third Edition
[Cancelled: ISO 583-1, ISO 583-1]
Conveyor belts with a textile carcass Total thickness and thickness of elements Part 1: Methods of test First Edition; Technical
Corrigendum 1: 12/01/2006; Together with 583-2 Replaces ISO 583:1990 [Cancelled By: ISO 583, ISO 583]
Plastics - Unsaturated Polyester Resins - Determination of Reactivity at 80 Degrees C (Conventional Method) First Edition
Plastics - Unplasticized Cellulose Acetate - Determination of Moisture Content Second Edition
Solid Mineral Fuels - Determination of Chlorine Using Eschka Mixture Third Edition
Hard coal Determination of total moisture Third Edition
Oil of Brazilian Sassafras First Edition
Titanium Dioxide Pigments for Paints - Part 1: Specifications and Methods of Tests First Edition; Replaces ISO 591
Essential Oils - Determination of Optical Rotation Second Edition
Conical Fittings with a 6 % (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Part 1: General Requirements
First Edition; CEN EN 20594-1: 1993
Conical Fittings with a 6 % (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Part 2: Lock Fittings Second
Edition
ISO
595-1
Reusable All-Glass or Metal-and-Glass Syringes for Medical Use - Part 1: Dimensions First Edition; Corrected and Reprinted - 1988
ISO
595-2
ISO
ISO
601
602
ISO
603-1
ISO
603-2
ISO
603-3
ISO
603-4
ISO
603-5
ISO
603-6
ISO
603-7
Reusable All-Glass or Metal-and-Glass Syringes for Medical Use - Part 2: Design, Performance Requirements and Tests First
Edition; CEN EN ISO 595-2: 1994
Solid Mineral Fuels - Determination of Arsenic Content Using the Standard Silver Diethyldithiocarbamate Photometric Method of ISO
2590 First Edition
Coal - Determination of Mineral Matter Second Edition
Bonded Abrasive Products - Dimensions - Part 1: Grinding Wheels for External Cylindrical Grinding between Centres First Edition;
Technical Corrigendum 1: 11-15-1999; Together with ISO 603-2: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967,
ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976
Bonded Abrasive Products - Dimensions - Part 2: Grinding Wheels for Centreless External Cylindrical Grinding Second Edition;
Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 and ISO 603-3: 1999 to ISO 603-16: 1999, Cancels and
Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976
and ISO 3921: 1976
Bonded Abrasive Products - Dimensions - Part 3: Grinding Wheels for Internal Cylindrical Grinding First Edition; Technical
Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999, ISO 603-2: 1999 and ISO 603-4: 1999 to ISO 603-16: 1999, Cancels
and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920:
1976 and ISO 3921: 1976
Bonded Abrasive Products - Dimensions - Part 4: Grinding Wheels for Surface Grinding/Peripheral Grinding First Edition; Technical
Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-3: 1999 and ISO 603-5: 1999 to ISO 603-16: 1999, Cancels
and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920:
1976 and ISO 3921: 1976
Bonded Abrasive Products - Dimensions - Part 5: Grinding Wheels for Surface Grinding/Face Grinding First Edition; Technical
Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-4: 1999 and ISO 603-6: 1999 to ISO 603-16: 1999, Cancels
and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920:
1976 and ISO 3921: 1976
Bonded Abrasive Products - Dimensions - Part 6: Grinding Wheels for Tool and Tool Room Grinding First Edition; Technical
Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-5: 1999 and ISO 603-7: 1999 to ISO 603-16: 1999, Cancels
and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920:
1976 and ISO 3921: 1976
Bonded Abrasive Products - Dimensions - Part 7: Grinding Wheels for Manually Guided Grinding First Edition; Technical
Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-6: 1999 and ISO 603-8: 1999 to ISO 603-16: 1999, Cancels
and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920:
1976 and ISO 3921: 1976
ISO
603-8
ISO
603-9
ISO
603-10
Bonded Abrasive Products - Dimensions - Part 8: Grinding Wheels for Deburring and Fettling/Snagging First Edition; Technical
Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-7: 1999 and ISO 603-9: 1999 to ISO 603-16: 1999, Cancels
and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920:
1976 and ISO 3921: 1976
Bonded Abrasive Products - Dimensions - Part 9: Grinding Wheels for High-Pressure Grinding First Edition; Technical Corrigendum
1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-8: 1999 and ISO 603-10: 1999 to ISO 603-16: 1999, Cancels and
Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976
and ISO 3921: 1976
Bonded Abrasive Products - Dimensions - Part 10: Stones for Honing and Superfinishings First Edition; Technical Corrigendum 1: 1115-1999; Together with ISO 603-1: 1999 to ISO 603-9: 1999 and ISO 603-11: 1999 to ISO 603-16: 1999, Cancels and Replaces
ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO
3921: 1976
ISO
603-11
ISO
603-12
ISO
603-13
ISO
603-14
ISO
603-15
Bonded Abrasive Products - Dimensions - Part 11: Hand Finishing Sticks First Edition; Technical Corrigendum 1: 11-15-1999;
Together with ISO 603-1: 1999 to ISO 603-10: 1999 and ISO 603-12: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603:
1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976
Bonded Abrasive Products - Dimensions - Part 12: Grinding Wheels for Deburring and Fettling on a Straight Grinder First Edition;
Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-11: 1999 and ISO 603-13: 1999 to ISO 603-16:
1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976,
ISO 3920: 1976 and ISO 3921: 1976
Bonded Abrasive Products - Dimensions - Part 13: Grinding Wheels for Deburring and Fettling on a Vertical Grinder First Edition;
Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-12: 1999 and ISO 603-14: 1999 to ISO 603-16:
1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976,
ISO 3920: 1976 and ISO 3921: 1976
Bonded Abrasive Products - Dimensions - Part 14: Grinding Wheels for Deburring and Fettling/Snagging on an Angle Grinder First
Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-13: 1999, ISO 603-15: 1999 and ISO 60316: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290:
1976, ISO 3920: 1976 and ISO 3921: 1976
Bonded Abrasive Products - Dimensions - Part 15: Grinding Wheels for Cutting-Off on Stationary or Mobile Cutting-Off Machines
First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-14: 1999 and ISO 603-16: 1999,
Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO
3920: 1976 and ISO 3921: 1976
603-16
Bonded Abrasive Products - Dimensions - Part 16: Grinding Wheels for Cutting-Off on Hand Held Power Tools First Edition;
Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-15: 1999, Cancels and Replaces ISO/R 603: 1967,
ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976
ISO
ISO
604
Plastics - Determination of Compressive Properties Third Edition
ISO
605
ISO
ISO
ISO
606 CORR 1
606
607
ISO
ISO
609
610
ISO
611
ISO
ISO
612
613
ISO
ISO
614
616
ISO
619
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
621
622
625
629
630
630-2
631
633
ISO
ISO
636
638
ISO
639-1
ISO
639-2
Pulses - Determination of Impurities, Size, Foreign Odours, Insects, and Species and Variety - Test Methods Second Edition
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets TECHNICAL
CORRIGENDUM 1 Third Edition
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Third Edition
Surface Active Agents and Detergents - Methods of Sample Division First Edition
Solid Mineral Fuels - Determination of Carbon and Hydrogen - High Temperature Combustion Method Second Edition; Corrigendum
1-1996
High-Tensile Steel Chains (Round Link) for Chain Conveyors and Coal Ploughs Second Edition
Road Vehicles - Braking of Automotive Vehicles and Their Trailers - Vocabulary Vehicules Routiers - Freinage des Vehicules
Automobiles et de Leurs Remorques - Vocabulaire Fourth Edition
Road Vehicles - Dimensions of Motor Vehicles and Towed Vehicles - Terms and Definitions First Edition; Erratum-1979; PNS 634:
1992
Ships and Marine Technology - Magnetic Compasses, Binnacles and Azimuth Reading Devices - Class B Second Edition
Shipbuilding and Marine Structures - Toughened Safety Glass Panes for Rectangular Windows and Side Scuttles - Punch Method of
Non-Destructive Strength Testing Third Edition
Coke - Determination of Shatter Indices Second Edition
Manganese Ores - Determination of Chromium Content - Diphenylcarbazide Photometric Method and Silver Persulphate Titrimetric
Method Second Edition
Manganese Ores - Determination of Metallic Iron Content (Metallic Iron Content Not Exceeding 2 %) - Sulphosalicylic Acid
Photometric Method Second Edition
Solid Mineral Fuels - Determination of Phosphorus Content - Reduced Molybdophosphate Photometric Method First Edition
Solid Mineral Fuels - Determination of Carbon and Hydrogen - Liebig Method Second Edition; Corrigendum 1-1996
Steel and Cast Iron - Determination of Manganese Content - Spectrophotometric Method First Edition; PNS 557: 1993
Structural Steels - Plates, Wide Flats, Bars, Sections and Profiles Second Edition; AMENDMENT 1: 12/01/2003
Structural Steels - Part 2: Technical Delivery Requirements for Hot-Finished Hollow Sections First Edition
Mosaic Parquet Panels - General Characteristics First Edition
Cork - Vocabulary Li×ge ù Vocabulaire Second Edition
Welding consumables Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels Classification Third
Edition
Pulps - Determination of Dry Matter Content First Edition; CEN EN 20638: 1993
Codes for the Representation of Names of Languages - Part 1: Alpha-2 Code Codes pour la Representation des Noms de Langue Partie 1: Code Alpha-2 First Edition; Replaces ISO 639
Codes for the Representation of Names of Languages - Part 2: Alpha-3 Code Codes Pour La Representation Des Noms De Langue Partie 2: Code Alpha-3 First Edition
ISO
ISO
ISO
ISO
ISO
639-3
641
642
643
646
Codes for the representation of names of languages ù Part 3: Alpha-3 code for comprehensive coverage of languages First Edition
Laboratory Glassware - Interchangeable Spherical Ground Joints First Edition
Steel - Hardenability Test by End Quenching (Jominy Test) Second Edition
Steels - Micrographic Determination of the Apparent Grain Size Second Edition
Information Technology - ISO 7-Bit Coded Character Set for Information Interchange Third Edition
Brown Coals and Lignites - Determination of the Yields of Tar, Water, Gas and Coke Residue by Low Temperature Distillation First
Edition
Laboratory Glassware - One-Mark Pipettes First Edition
Laboratory Glassware - Density Hydrometers for General Purposes - Part 1: Specification First Edition
Laboratory Glassware - Density Hydrometers for General Purposes - Part 2: Test Methods and Use First Edition
Relative Density 60/60 Degrees F Hydrometers for General Purposes First Edition
Solid-Stem Calorimeter Thermometers First Edition
Enclosed-Scale Calorimeter Thermometers First Edition
Long Solid-Stem Thermometers for Precision Use First Edition
Short Solid-Stem Thermometers for Precision Use First Edition; Erratum-1982
Long Enclosed-Scale Thermometers for Precision Use First Edition; Erratum-1982
Short Enclosed-Scale Thermometers for Precision Use First Edition
Hot-Rolled Steel Sections - Part 1: Equal-Leg Angles - Dimensions First Edition
Hot-Rolled Steel Sections - Part 2: Unequal-Leg Angles - Dimensions First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
647
648
649-1
649-2
650
651
652
653
654
655
656
657-1
657-2
ISO
657-5
ISO
657-11
ISO
657-14
ISO
657-15
ISO
657-16
ISO
657-18
Hot-Rolled Steel Sections - Part 14: Hot-Finished Structural Hollow Sections - Dimensions and Sectional Properties Third Edition
Hot-Rolled Steel Sections - Part 15: Sloping Flange Beam Sections (Metric Series) - Dimensions and Sectional Properties First
Edition
Hot-Rolled Steel Sections - Part 16: Sloping Flange Column Sections (Metric Series) - Dimensions and Sectional Properties First
Edition
Hot-Rolled Steel Sections - Part 18: L Sections for Shipbuilding (Metric Series) - Dimensions, Sectional Properties and Tolerances
First Edition
ISO
ISO
ISO
657-19
657-21
658
Hot-Rolled Steel Sections - Part 19: Bulb Flats (Metric Series) - Dimensions, Sectional Properties and Tolerances First Edition
Hot-Rolled Steel Sections - Part 21: T-Sections with Equal Depth and Flange Width - Dimensions First Edition
Oilseeds - Determination of Content Impurities Third Edition
Hot-Rolled Steel Sections - Part V: Equal-Leg Angles and Unequal-Leg Angles - Tolerances for Metric and Inch Series First Edition
Hot-Rolled Steel Sections - Part 11: Sloping Flange Channel Sections (Metric Series) - Dimensions and Sectional Properties First
Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
659
660
661
662
663
664
665
666
ISO
668
ISO
ISO
ISO
ISO
669
671
672
673
ISO
ISO
ISO
ISO
ISO
ISO
675
676
677
678
679
680
ISO
ISO
ISO
ISO
683-1
683-9
683-10
683-11
Oilseeds - Determination of Oil Content (Reference Method) Third Edition
Animal and Vegetable Fats and Oils - Determination of Acid Value and Acidity Second Edition; Amendment 1: 3/15/2003
Animal and vegetable fats and oils Preparation of test sample Third Edition
Animal and Vegetable Fats and Oils - Determination of Moisture and Volatile Matter Content Second Edition
Animal and vegetable fats and oils ù Determination of insoluble impurities content Fourth Edition
Oilseeds - Reduction of Laboratory Sample to Test Sample Second Edition
Oilseeds - Determination of Moisture and Volatile Matter Content Second Edition; Corrected Version: 04/01/2002
Machine tools Mounting of grinding wheels by means of hub flanges Third Edition
Series 1 freight containers - Classification, dimensions and ratings Fifth Edition; Amendment 1: 09/15/2005; Amendment 2:
10/01/2005
Resistance Welding - Resistance Welding Equipment - Mechanical and Electrical Requirements Second Edition * Corrected and
Reprinted 03/15/2001
Steel and Cast Iron - Determination of Sulphur Content - Combustion Titrimetric Method First Edition
Soaps - Determination of Moisture and Volatile Matter Content - Oven Method First Edition
Soaps - Determination of Content of Ethanol-Insoluble Matter Second Edition
Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling Point First Edition;
Corrigendum 1-1990
Spices and Condiments - Botanical Nomenclature Second Edition; Corrigendum 1-02/15/1997
Straight Bevel Gears for General Engineering and Heavy Engineering - Basic Rack First Edition
Straight Bevel Gears for General Engineering and Heavy Engineering - Modules and Diametral Pitches First Edition
Methods of Testing Cements - Determination of Strength First Edition
Cement - Test Methods - Chemical Analysis First Edition
Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 1: Direct-Hardening Unalloyed and Low-Alloyed Wrought Steel in
Form of Different Black Products First Edition
Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 9: Wrought Free-Cutting Steels First Edition
Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 10: Wrought Nitriding Steels Second Edition
Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 11: Wrought Case-Hardening Steels First Edition
ISO
683-14
Heat-treatable steels, alloy steels and free-cutting steels Part 14: Hot-rolled steels for quenched and tempered springs Third Edition
ISO
ISO
683-15
683-17
ISO
ISO
ISO
683-18
684
685
Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 15: Valve Steels for Internal Combustion Engines Second Edition
Heat-Treated Steels, Alloy Steels and Free-Cutting Steels - Part 17: Ball and Roller Bearing Steels Second Edition
Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 18: Bright Products of Unalloyed and Low Alloy Steels Second
Edition
Analysis of Soaps - Determination of Total Free Alkali First Edition
Analysis of Soaps - Determination of Total Alkali Content and Total Fatty Matter Content First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
687
690
690-2
691
692
693
694
Solid mineral fuels Coke Determination of moisture in the general analysis test sample Second Edition
Documentation - Bibliographic References - Content, Form and Structure Second Edition
Information and Documentation - Bibliographic References - Part 2: Electronic Documents or Parts Thereof First Edition
Assembly Tools for Screws and Nuts - Wrench and Socket Openings - Tolerances for General Use Fourth Edition
Pulps - Determination of Alkali Solubility Second Edition
Dimensions of Seam Welding Wheel Blanks First Edition
Ships and Marine Technology - Positioning of Magnetic Compasses in Ships First Edition
Glass - Resistance to Attack by a Boiling Aqueous Solution of Mixed Alkali - Method of Test and Classification Third Edition; PNS
1197: 1993
Surface Active Agents - Measurement of Foaming Power - Modified Ross-Miles Method First Edition
Surface Active Agents - Washing Powders - Determination of Apparent Density - Method by Measuring the Mass of a Given Volume
Second Edition
Pulps - Determination of Alkali Resistance Second Edition
International Gear Notation - Symbols for Geometrical Data Second Edition
ISO
ISO
695
696
ISO
ISO
ISO
697
699
701
ISO
ISO
ISO
702-1
702-2
702-3
Machine Tools - Connecting Dimensions of Spindle Noses and Work Holding Chucks - Part 1: Conical Connection Second Edition
Machine Tools - Spindle Noses and Face Plates - Sizes for Interchangeability - Part II: Camlock Type First Edition
Machine Tools - Spindle Noses and Face Plates - Sizes for Interchangeability - Part III: Bayonet Type First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
702-4
703
704
705
706
707
709
ISO
710-I
ISO
710-II
ISO
710-III
ISO
710-4
ISO
710-5
Machine tools Connecting dimensions of spindle noses and work holding chucks Part 4: Cylindrical connection First Edition
Conveyor belts ù Transverse flexibility (troughability) ù Test method Third Edition [Superseded: ISO 703-1, ISO 703-1]
Terminology Work - Principles and Methods Second Edition
Rubber Latex - Determination of Density between 5 Degrees C and 40 Degrees C Second Edition
Rubber Latex - Determination of Coagulum Content (Sieve Residue) Fourth Edition
Milk and Milk Products - Guidance on Sampling Second Edition
Essential Oils - Determination of Ester Value Second Edition
Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part I: General Rules of Representation First
Edition
Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part II: Representation of Sedimentary Rocks
First Edition
Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part III: Representation of Magmatic Rocks
First Edition
Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 4: Representation of Metamorphic Rocks
First Edition
Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 5: Representation of Minerals Second
Edition
ISO
710-6
ISO
ISO
ISO
ISO
ISO
ISO
710-7
711
712
713
714
715
ISO
717-1
ISO
ISO
ISO
ISO
ISO
ISO
717-2
718
719
720
721
722
ISO
ISO
723
724
ISO
727-1
ISO
ISO
ISO
727-2
728
729
ISO
ISO
ISO
ISO
730-1
730-2
732
734-1
ISO
ISO
734-2
735
Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 6: Representation of Contact Rocks and
Rocks Which Have Undergone Metasomatic, Pneumatolytic or Hydrothermal Transformation or Transformation by Weathering First
Edition
Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 7: Tectonic Symbols First Edition
Cereals and Cereal Products - Determination of Moisture Content (Basic Reference Method) Second Edition
Cereals and Cereal Products - Determination of Moisture Content Routine Reference Method Third Edition
Zinc - Determination of Lead and Cadmium Contents - Polarographic Method First Edition
Zinc - Determination of Iron Content - Photometric Method First Edition
Zinc - Determination of Lead Content - Polarographic Method First Edition
Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation Second Edition;
Amendment 1: 08/15/2006
Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation Second Edition;
Amendment 1: 08/15/2006
Laboratory Glassware - Thermal Shock and Thermal Shock Endurance - Test Methods Second Edition
Glass - Hydrolytic Resistance of Glass Grains at 98 Degrees C - Method of Test and Classification Second Edition
Glass - Hydrolytic Resistance of Glass Grains at 121 Degrees C - Method of Test and Classification Second Edition
Rock Drilling Equipment - Integral Stems Second Edition
Rock Drilling Equipment - Hollow Drill Steels in Bar Form, Hexagonal and Round Third Edition
Rock Drilling Equipment - Forged Collared Shanks and Corresponding Chuck Bushings for Hollow Hexagonal Drill Steels Second
Edition
ISO General-Purpose Metric Screw Threads - Basic Dimensions Second Edition
Fittings Made From Unplasticized Poly(Vinyl Chloride) (PVC-U), Chlorinated Poly(Vinyl Chloride) (PVC-C) or
Acrylonitrile/Butadiene/Styrene (ABS) With Plain Sockets for Pipes Under Pressure - Part 1: Metric Series First Edition
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or
acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure Part 2: Inch-based series Second edition
Coke (Nominal Top Size Greater Than 20 mm) - Size Analysis by Sieving Third Edition
Oilseeds - Determination of Acidity of Oils Second Edition
Agricultural Wheeled Tractors - Rear-Mounted Three-Point Linkage - Part 1: Categories 1, 2, 3 and 4 Third Edition; Corrigendum 11995
Agricultural Wheeled Tractors - Three-Point Linkage - Part II: Category 1 N (Narrow Hitch) First Edition
Photography - 120-Size and 220-Size Films - Dimensions Fourth Edition
Oilseed meals Determination of oil content Part 1: Extraction method with hexane (or light petroleum) Second Edition
Oilseed Residues - Determination of Oil Content - Part 2: Rapid Extraction Method First Edition; Together with ISO 734-1: 1998, it
Cancels and Replaces ISO 734: 1979
Oilseed Residues - Determination of Ash Insoluble in Hydrochloric Acid First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
737
738
739
740
746
748
749
750
751
752 CORR 1
752
756-1
758
ISO
ISO
ISO
ISO
ISO
ISO
759
760
762
763
764
765
ISO
ISO
ISO
769
770
771
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
772
776
777
778
779
780
783
787-1
ISO
787-2
Coniferous Sawn Timber - Sizes - Methods of Measurement First Edition
Coniferous Sawn Timber - Sizes - Permissible Deviations and Shrinkage First Edition
Sodium Carbonate for Industrial Use - Preparation and Storage of Test Samples First Edition
Sodium Carbonate for Industrial Use - Determination of Total Soluble Alkalinity - Titrimetric Method First Edition
Sodium Carbonate for Industrial Use - Determination of Matter Insoluble in Water at 50 Degrees Celsius First Edition
Measurement of Liquid Flow in Open Channels - Velocity-Area Methods Third Edition
Oilseed Residues - Determination of Total Ash First Edition
Fruit and Vegetable Products - Determination of Titratable Acidity Second Edition
Fruit and Vegetable Products - Determination of Water-Insoluble Solids Second Edition
Zinc ingots TECHNICAL CORRIGENDUM 1 Second Edition
Zinc ingots Second Edition
Propan-2-ol for Industrial Use - Methods of Test - Part 1: General First Edition
Liquid Chemical Products for Industrial Use - Determination of Density at 20 Degrees Celsius First Edition
Volatile Organic Liquids for Industrial Use - Determination of Dry Residue After Evaporation on a Water Bath - General Method First
Edition
Determination of Water - Karl Fischer Method (General Method) First Edition
Fruit and vegetable products Determination of mineral impurities content Second Edition
Fruit and vegetable products Determination of ash insoluble in hydrochloric acid Second Edition
Horology - Magnetic Resistant Watches Third Edition
Pesticides Considered Not to Require Common Names First Edition
Fibre Building Boards - Hard and Medium Boards - Determination of Water Absorption and of Swelling in Thickness After Immersion
in Water First Edition
Crude or Rectified Oils of Eucalyptus Globulus (Eucalyptus Globulus Labil.) Second Edition
Oilseed Residues - Determination of Moisture and Volatile Matter Content First Edition
Hydrometric Determinations - Vocabulary and Symbols Fourth Edition; Amendment 1:11/15/2002; Amendment 2: 05/01/2004
Pulps - Determination of Acid-Insoluble Ash Second Edition
Paper, board and pulp - Determination of acid-soluble calcium Third Edition
Paper, board and pulp - Determination of acid-soluble copper Third Edition
Paper, Board and Pulp - Determination of Iron Second Edition
Packaging - Pictorial Marking for Handling of Goods Fourth Edition
Metallic Materials - Tensile Testing at Elevated Temperature Second Edition
General Methods of Test for Pigments and Extenders - Part 1: Comparison of Colour of Pigments First Edition
General Methods of Test for Pigments and Extenders - Part 2: Determination of Matter Volatile at 105 Degrees Celsius First Edition;
CEN EN ISO 787-2: 1995
ISO
787-3
ISO
787-4
ISO
787-5
ISO
787-7
ISO
787-8
ISO
787-9
ISO
787-10
ISO
787-11
General Methods of Test for Pigments and Extenders - Part 3: Determination of Matter Soluble in Water - Hot Extraction Method
Second Edition
General Methods of Test for Pigments and Extenders - Part 4: Determination of Acidity or Alkalinity of the Aqueous Extract First
Edition
General Methods of Test for Pigments and Extenders - Part 5: Determination of Oil Absorption Value First Edition; CEN EN ISO 7875: 1995
General Methods of Test for Pigments and Extenders - Part 7: Determination of Residue on Sieve - Water Method - Manual
Procedure First Edition
General Methods of Test for Pigments and Extenders - Part 8: Determination of Matter Soluble in Water - Cold Extraction Method
Second Edition
General Methods of Test for Pigments and Extenders - Part 9: Determination of pH Value of an Aqueous Suspension First Edition;
CEN EN ISO 787-9: 1995
General Methods of Test for Pigments and Extenders - Part 10: Determination of Density - Pyknometer Method Second Edition; CEN
EN ISO 787-10: 1995
General Methods of Test for Pigments and Extenders - Part 11: Determination of Tamped Volume and Apparent Density After
Tamping First Edition; CEN EN ISO 787-11: 1995
ISO
787-13
General Methods of Test for Pigments - Part 13: Determination of Water-Soluble Sulfates, Chlorides and Nitrates Second Edition
ISO
787-14
ISO
787-15
General Methods of Test for Pigments and Extenders - Part 14: Determination of Resistivity of Aqueous Extract Second Edition
General Methods of Test for Pigments and Extenders - Part 15: Comparison of Resistance to Light of Coloured Pigments of Similar
Types Second Edition; CEN EN ISO 787-15: 1995
ISO
787-16
General Methods of Test for Pigments and Extenders - Part 16: Determination of Relative Tinting Strength (or Equivalent Colouring
Value) and Colour on Reduction of Coloured Pigments - Visual Comparison Method Second Edition; CEN EN ISO 787-16: 1995
ISO
787-17
ISO
ISO
787-18
787-19
ISO
787-21
ISO
787-22
ISO
787-23
General Methods of Test for Pigments and Extenders - Part 17: Comparison of Lightening Power of White Pigments Second Edition
General Methods of Test for Pigments and Extenders - Part 18: Determination of Residue on Sieve - Mechanical Flushing Procedure
Second Edition; CEN EN ISO 787-18: 1995
General Methods of Test for Pigments - Part 19 First Edition; CEN EN ISO 787-19: 1995
General Methods of Test for Pigments and Extenders - Part 21: Comparison of Heat Stability of Pigments Using a Stoving Medium
First Edition
General Methods of Test for Pigments and Extenders - Part 22: Comparison of Resistance to Bleeding of Pigments First Edition
General Methods of Test for Pigments and Extenders - Part 23: Determination of Density (Using a Centrifuge to Remove Entrained
Air) First Edition
ISO
787-24
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
787-25
788
789-1
789-2
789-3
789-4
789-5
789-6
789-7
789-8
789-9
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
789-10
789-11
789-12
791
792
793
794
795
796
797
799
801-1
801-2
801-3
802
ISO
804
ISO
805
General Methods of Test for Pigments and Extenders - Part 24: Determination of Relative Tinting Strength of Coloured Pigments and
Relative Scattering Power of White Pigments - Photometric Methods Second Edition; CEN EN ISO 787-24: 1995
General Methods of Test for Pigments and Extenders - Part 25: Comparison of the Colour, in Full-Shade Systems, of White, Black
and Coloured Pigments - Colorimetric Method First Edition
Ultramarine Pigments for Paints First Edition
Agricultural Tractors - Test Procedures - Part 1: Power Tests for Power Take-Off Second Edition
Agricultural Tractors - Test Procedures - Part 2: Rear Three-Point Linkage Lifting Capacity Third Edition
Agricultural Tractors - Test Procedures - Part 3: Turning and Clearance Diameters Second Edition
Agricultural Tractors - Test Procedures - Part 4: Measurement of Exhaust Smoke Second Edition
Agricultural Tractors - Test Procedures - Part 5: Partial Power PTO - Non-Mechanically Transmitted Power First Edition
Agricultural Tractors - Test Procedures - Part 6: Centre of Gravity First Edition; Amendment 1-1996
Agricultural Tractors - Test Procedures - Part 7: Axle Power Determination First Edition
Agricultural Tractors - Test Procedures - Part 8: Engine Air Cleaner First Edition
Agricultural Tractors - Test Procedures - Part 9: Power Tests for Drawbar First Edition; Amendment 1-1993
Agricultural tractors Test procedures Part 10: Hydraulic power at tractor/implement interface First Edition; Co-Copyrighted by OECD
Agricultural Tractors - Test Procedures - Part 11: Steering Capability of Wheeled Tractors First Edition
Agricultural Tractors - Test Procedures - Part 12: Low Temperature Starting First Edition
Magnesium Alloys - Determination of Aluminium - 8-Hydroxyquinoline Gravimetric Method First Edition
Magnesium and Magnesium Alloys - Determination of Iron - Orthophenanthroline Photometric Method First Edition
Aluminium and Aluminium Alloys - Determination of Iron - Orthophenanthroline Photometric Method First Edition
Magnesium and Magnesium Alloys - Determination of Copper Content - Oxalyldihydrazide Photometric Method First Edition
Aluminium and Aluminium Alloys - Determination of Copper Content - Oxalyldihydrazide Photometric Method First Edition
Aluminium Alloys - Determination of Copper - Electrolytic Method First Edition
Aluminium and Aluminium Alloys - Determination of Silicon - Gravimetric Method First Edition
Ships and marine technology Pilot ladders Third Edition
Pulps - Determination of Saleable Mass in Lots - Part 1: Pulp Baled in Sheet Form Second Edition
Pulps - Determination of Saleable Mass in Lots - Part 2: Pulps (Such as Flash-Dried Pulp) Baled in Slabs Second Edition
Pulps - Determination of Saleable Mass in Lots - Part 3: Unitized Bales First Edition; Corrected and Reprinted - 1996
Aluminium Oxide Primarily Used for the Production of Aluminium - Preparation and Storage of Test Samples First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Preparation of Solution for Analysis - Method by Alkaline Fusion
First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Iron Content - 1,10-Phenanthroline Photometric
Method First Edition
ISO
806
ISO
808
ISO
809
ISO
810
ISO
ISO
811
812
ISO
ISO
813
814
ISO
ISO
ISO
815
817
820
ISO
830
ISO
ISO
832
834-1
ISO
834-4
ISO
ISO
ISO
834-5
834-6
834-7
ISO
ISO
ISO
ISO
ISO
834-8
835
836
839-1
839-2
Aluminium oxide primarily used for the production of aluminium Determination of loss of mass at 300 C and 1 000 C Second
Edition; Supersedes ISO 803
Aluminium and Aluminium Alloys - Determination of Silicon - Spectrophotometric Method with the Reduced Silicomolybdic Complex
First Edition
Magnesium and Magnesium Alloys - Determination of Manganese - Periodate Photometric Method (Manganese Content between
0,01 and 0,8 %) First Edition
Magnesium and Magnesium Alloys - Determination of Manganese - Periodate Photometric Method (Manganese Content Less Than
0,01 %) First Edition
Textile Fabrics - Determination of Resistance to Water Penetration - Hydrostatic Pressure Test First Edition; CAN/CGSB-4.2 NO.
26.3-95
Rubber, vulcanized or thermoplastic Determination of low-temperature brittleness Second Edition
Rubber, Vulcanized or Thermoplastic - Determination of Adhesion to a Rigid Substrate - 90 Degree Peel Method Third Edition
Rubber, vulcanized or thermoplastic ù Determination of adhesion to metal ù Two-plate method Fourth Edition
Rubber, Vulcanized or Thermoplastic - Determination of Compression Set at Ambient, Elevated or Low Temperatures Second
Edition; Corrigendum 1-1993
Refrigerants Designation system Second Edition
Particle Boards - Definition and Classification First Edition
Freight Containers - Vocabulary Conteneurs Pour Le Transport De Marchandises - Vocabulaire Second Edition; Technical
Corrigendum 1: 07/15/2001
Information and Documentation - Bibliographic Description and References - Rules for the Abbreviation of Bibliographic Terms
Second Edition
Fire-Resistance Tests - Elements of Building Construction - Part 1: General Requirements First Edition
Fire-Resistance Tests - Elements of Building Construction - Part 4: Specific Requirements for Loadbearing Vertical Separating
Elements First Edition
Fire-Resistance Tests - Elements of Building Construction - Part 5: Specific Requirements for Loadbearing Horizontal Separating
Elements First Edition
Fire-Resistance Tests - Elements of Building Construction - Part 6: Specific Requirements for Beams First Edition
Fire-Resistance Tests - Elements of Building Construction - Part 7: Specific Requirements for Columns First Edition
Fire-Resistance Tests - Elements of Building Construction - Part 8: Specific Requirements for Non-Loadbearing Vertical Separating
Elements First Edition
Laboratory glassware ù Graduated pipettes First Edition [Replaced: ISO 835-1, ISO 835-2, ISO 835-3, ISO 835-4]
Terminology for Refractories Terminologie Des Materiaux Refractaires First Edition
Milling machine arbors with 7/24 tapers Part 1: Dimensions and designation Second Edition
Milling Machine Arbors with 7/24 Tapers - Part II: Accessories First Edition
ISO
ISO
ISO
ISO
ISO
ISO
841
844
845
846
855
856
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
857-1
857-2
860
862
863
865
866
868
871
873
874
875
ISO
877
ISO
882-1
ISO
ISO
ISO
882-2
883
885
ISO
886
Industrial Automation Systems and Integration - Numerical Control of Machines - Coordinate System and Motion Nomenclature
Second Edition
Rigid cellular plastics ù Determination of compression properties Fifth Edition
Cellular plastics and rubbers Determination of apparent density Third Edition
Plastics - Evaluation of the Action of Microorganisms Second Edition
Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression Second Edition
Oil of peppermint (Mentha x piperita L.) Second Edition
Welding and Allied Processes - Vocabulary - Part 1: Metal Welding Processes Soudage Et Techniques Connexes - Vocabulaire Partie 1: Soudage Des Metaux First Edition; Replaces ISO 857
Welding and allied processes Vocabulary Part 2: Soldering and brazing processes and related terms First Edition
Terminology Work - Harmonization of Concepts and Terms Second Edition
Surface Active Agents - Vocabulary First Edition; Corrigendum 1-1993; CEN EN ISO 862: 1995
Cement - Test Methods - Pozzolanicity Test for Pozzolanic Cements First Edition
Slots in Platens for Projection Welding Machines First Edition
Centre Drills for Centre Holes without Protecting Chamfers - Type A First Edition
Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) Third Edition
Plastics - Determination of Ignition Temperature Using a Hot-Air Furnace Third Edition
Peaches - Guide to Cold Storage First Edition
Fresh Fruits and Vegetables - Sampling First Edition
Essential Oils - Evaluation of Miscibility in Ethanol Second Edition
Plastics - Methods of Exposure to Direct Weathering, to Weathering Using Glass-Filtered Daylight, and to Intensified Weathering by
Daylight Using Fresnel Mirrors Second Edition
Cardamom (Elettaria Cardamomum (Linnaeus) Maton Var. Minuscula Burkill) - Specification - Part 1: Whole Capsules First Edition;
Corrigendum 1-1996
Cardamom (Elettaria Cardamomum (Linnaeus) Maton Var. Minuscula Burkill) - Specification - Part 2: Seeds First Edition;
Corrigendum 1-1996
Indexable Hardmetal (Carbide) Inserts with Rounded Corners, without Fixing Hole - Dimensions Third Edition
General Purpose Bolts and Screws - Metric Series - Radii under the Head Second Edition
Aluminium and Aluminium Alloys - Determination of Manganese - Photometric Method (Manganese Content between 0,005 and 1,5
%) First Edition
ISO
ISO
ISO
ISO
ISO
887
888
893
894
895
Plain Washers for Metric Bolts, Screws and Nuts for General Purposes - General Plan Second Edition; Corrigendum 1: 01/15/2006
Bolts, Screws and Studs - Nominal Lengths, and Thread Lengths for General Purpose Bolts First Edition
Surface Active Agents - Technical Alkane Sulfonates - Methods of Analysis Second Edition
Surface Active Agents - Technical Sodium Primary Alkylsulphates - Methods of Analysis First Edition
Surface Active Agents - Technical Sodium Secondary Alkylsulfates - Methods of Analysis First Edition
ISO
ISO
ISO
897
898-1
898-2
ISO
ISO
898-5
898-6
ISO
ISO
ISO
898-7
899-1
899-2
ISO
900
ISO
ISO
ISO
ISO
901
902
903
904
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
910
917
918
920
921
924
925
927
928
930
931
934
935
936
937
938
939
941
Photography - Roll Films, 126, 110 and 135-Size Films - Identification of the Image-Bearing Side Third Edition
Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 1: Bolts, Screws and Studs Third Edition
Mechanical Properties of Fasteners - Part 2: Nuts with Specified Proof Load Values - Coarse Thread Second Edition
Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 5: Set Screws and Similar Threaded Fasteners Not
under Tensile Stresses Second Edition
Mechanical Properties of Fasteners - Part 6: Nuts with Specified Proof Load Values - Fine Pitch Thread Second Edition
Mechanical Properties of Fasteners - Part 7: Torsional Test and Minimum Torques for Bolts and Screws with Nominal Diameters 1
mm to 10 mm First Edition
Plastics - Determination of Creep Behaviour - Part 1: Tensile Creep Second Edition
Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading Second Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Titanium Content - Diantipyrylmethane
Photometric Method First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Absolute Density - Pyknometer Method First
Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Measurement of the Angle of Repose First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Untamped Density First Edition
Hydrochloric Acid for Industrial Use - Determination of Total Acidity - Titrimetric Method First Edition
Sulphuric Acid and Oleum for Industrial Use - Determination of Total Acidity, and Calculation of Free Sulphur Trioxide Content of
Oleum - Titrimetric Method First Edition
Testing of Refrigerant Compressors Second Edition
Volatile Organic Liquids for Industrial Use - Determination of Distillation Characteristics First Edition
Wool - Determination of Fibre Length (Barbe and Hauteur) Using a Comb Sorter First Edition
Nuclear Energy - Vocabulary Energie Nucleaire - Vocabulaire Second Edition
Coal Preparation Plant - Principles and Conventions for Flowsheets Second Edition
Solid Mineral Fuels - Determination of Carbonate Carbon Content - Gravimetric Method Third Edition
Spices and Condiments - Determination of Extraneous Matter Content Second Edition
Spices and Condiments - Determination of Total Ash Second Edition
Spices and Condiments - Determination of Acid-Insoluble Ash Second Edition
Green Bananas - Guide to Storage and Transport First Edition
Animal and Vegetable Fats and Oils - Determination of Water Content - Entrainment Method First Edition
Animal and Vegetable Fats and Oils - Determination of Titre First Edition
Meat and Meat Products - Determination of Total Ash Second Edition
Meat and Meat Products - Determination of Nitrogen Content (Reference Method) First Edition; PNS 567: 1992
Hand-Operated Stillage Trucks - Principal Dimensions First Edition
Spices and Condiments - Determination of Moisture Content - Entrainment Method First Edition
Spices and Condiments - Determination of Cold Water-Soluble Extract First Edition
ISO
ISO
ISO
ISO
ISO
ISO
945
946
948
949
959-1
959-2
ISO
ISO
962
965-1
ISO
ISO
965-2
965-3
ISO
965-4
ISO
ISO
ISO
ISO
ISO
965-5
972
973
974
975
ISO
ISO
ISO
ISO
976
979
981
999
ISO
ISO
ISO
ISO
ISO
1000
1001
1002
1003
1004
ISO
1005-1
ISO
ISO
1005-2
1005-3
Cast Iron - Designation of Microstructure of Graphite First Edition
Grey Cast Iron - Beam Unnotched Impact Test First Edition
Spices and Condiments - Sampling First Edition
Cauliflowers - Guide to Cold Storage and Refrigerated Transport Second Edition
Pepper (Piper Nigrum L.), Whole or Ground - Specification - Part 1: Black Pepper Second Edition
Pepper (Piper Nigrum L.), Whole or Ground - Specification - Part 2: White Pepper Second Edition
Information Processing - Implementation of the 7-Bit Coded Character Set and Its 7-Bit and 8-Bit Extensions on 9-Track 12,7 mm (0.5
in) Magnetic Tape First Edition
ISO General Purpose Metric Screw Threads - Tolerances - Part 1: Principles and Basic Data Third Edition
ISO General Purpose Metric Screw Threads - Tolerances - Part 2: Limits of Sizes for General Purpose External and Internal Screw
Threads - Medium Quality Third Edition
ISO General Purpose Metric Screw Threads - Tolerances - Part 3: Deviations for Constructional Screw Threads Third Edition
ISO General Purpose Metric Screw Threads - Tolerances - Part 4: Limits of Sizes for Hot-Dip Galvanized External Screw Threads to
Mate with Internal Screw Threads Tapped with Tolerance Position H or G After Galvanizing First Edition
ISO General Purpose Metric Screw Threads - Tolerances - Part 5: Limit of Sizes for Internal Screw Threads to Mate with Hot-Dip
Galvanized External Screw Threads with Maximum Size of Tolerance Position h Before Galvanizing First Edition
Chillies and Capsicums, Whole or Ground (Powdered) - Specification Second Edition
Pimento (Allspice) [Pimenta Dioica (L.) Merr.], Whole or Ground - Specification Second Edition
Plastics - Determination of the Brittleness Temperature by Impact Second Edition
Brown Coals and Lignites - Determination of Yield of Benzene-Soluble Extract - Semi-Automatic Method Third Edition
Rubber and Plastics - Polymer Dispersions and Rubber Latices - Determination of PH Third Edition; Replaces ISO 1148: 1980;
Amendment 1: 02/01/2006
Sodium Hydroxide for Industrial Use - Method of Assay First Edition
Sodium Hydroxide for Industrial Use - Determination of Chloride Content - Mercurimetric Method First Edition
Information and Documentation - Guidelines for the Content, Organization and Presentation of Indexes Second Edition
SI Units and Recommendations for the Use of Their Multiples and of Certain Other Units Third Edition; Amendment 1: 11-01-1998
Information Processing - File Structure and Labelling of Magnetic Tapes for Information Interchange Second Edition
Rolling Bearings - Airframe Bearings - Characteristics, Boundary Dimensions, Tolerances, Static Load Ratings First Edition
Spices and Condiments - Ginger, Whole, in Pieces, or Ground - Specification First Edition
Information Processing - Magnetic Ink Character Recognition - Print Specifications Third Edition
Railway Rolling Stock Material - Part 1: Rough-Rolled Tyres for Tractive and Trailing Stock - Technical Delivery Conditions Third
Edition
Railway Rolling Stock Material - Part 2: Tyres, Wheel Centres and Tyred Wheels for Tractive and Trailing Stock - Dimensional,
Balancing and Assembly Requirements First Edition
Railway Rolling Stock Material - Part 3: Axles for Tractive and Trailing Stock - Quality Requirements First Edition
ISO
1005-4
ISO
ISO
1005-6
1005-7
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1005-8
1005-9
1006
1007
1008
1009
1012
1013
ISO
ISO
ISO
ISO
1017
1018
1019
1021
ISO
ISO
1022
1023
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1026
1029
1030
1031
1032
1033
1034
1035-1
1035-2
1035-3
1035-4
1036
1039
Railway Rolling Stock Material - Part 4: Rolled or Forged Wheel Centres for Tyred Wheels for Tractive and Trailing Stock - Quality
Requirements First Edition; NZS/ISO 1005.4: 1986
Railway Rolling Stock Material - Part 6: Solid Wheels for Tractive and Trailing Stock - Technical Delivery Conditions Second Edition
Railway Rolling Stock Material - Part 7: Wheelsets for Tractive and Trailing Stock - Quality Requirements First Edition
Railway Rolling Stock Material - Part 8: Solid Wheels for Tractive and Trailing Stock - Dimensional and Balancing Requirements First
Edition
Railway Rolling Stock Material - Part 9: Axles for Tractive and Trailing Stock - Dimensional Requirements First Edition
Building Construction - Modular Coordination - Basic Module Second Edition; PNS 639: 1988
Photography - 135-Size Film and Magazine - Specifications Third Edition; Supersedes ANSI IT1.14
Photography - Paper Dimensions - Pictorial Sheets Second Edition
Photography - Paper Dimensions - Rolls for Printers Third Edition
Photography - Films in Sheets and Rolls for General Use - Dimensions Third Edition
Coke - Determination of Bulk Density in a Large Container Second Edition
Brown coals and lignites Determination of acetone-soluble material (ôresinous substanceö) in the benzene-soluble extract Third
Edition
Hard Coal - Determination of Moisture-Holding Capacity First Edition; PNS 289-11: 1990
Cinematography - Spools, Daylight Loading Type for 16 mm Motion-Picture Cameras - Dimensions Second Edition
Aircraft - Engine Nacelle Fire Extinguisher Apertures and Doors First Edition
Aerospace - Gaseous Oxygen Replenishment Connection for Use in Fluid Systems (Old Type) - Dimensions (Inch Series) First
Edition
Aircraft - High Pressure Air Charging Valves First Edition
Fruit and Vegetable Products - Determination of Dry Matter Content by Drying under Reduced Pressure and of Water Content by
Azeotropic Distillation First Edition
Coniferous Sawn Timber - Defects - Classification First Edition
Coniferous Sawn Timber - Defects - Measurement First Edition
Coniferous Sawn Timber - Defects - Terms and Definitions First Edition
Coniferous Sawn Timber - Sizes - Terms and Definitions First Edition
Aircraft - Dimensions for General Purpose Push-Pull Three-Pole Circuit-Breakers First Edition
Aircraft - Ground Air-Conditioning Connections First Edition;
Hot-Rolled Steel Bars - Part 1: Dimensions of Round Bars First Edition
Hot-Rolled Steel Bars - Part 2: Dimensions of Square Bars First Edition
Hot-Rolled Steel Bars - Part 3: Dimensions of Flat Bars First Edition; Amendment Slip-1981
Hot-Rolled Steel Bars - Part 4: Tolerances Second Edition
Textile Machinery - Dyeing and Finishing Machines - Definition of Left and Right Sides Second Edition
Cinematography - Cores for Motion-Picture and Magnetic Film Rolls - Dimensions Third Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1040
1041
1042
1043-1
1043-2
1043-3
1043-4
1044
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1049
1050
1051
1052
1053
1054
1055
ISO
1060-1
ISO
ISO
ISO
ISO
1060-2
1061
1063
1064
ISO
ISO
ISO
ISO
ISO
ISO
1065
1066
1067
1068
1069
1070
ISO
ISO
1071
1072
ISO
1073-1
Building Construction - Modular Coordination - Multimodules for Horizontal Coordinating Dimensions Second Edition
Essential Oils - Determination of Freezing Point First Edition
Laboratory Glassware - One-Mark Volumetric Flasks Fourth Edition
Plastics - Symbols and Abbreviated Terms - Part 1: Basic Polymers and Their Special Characteristics Third Edition
Plastics - Symbols and Abbreviated Terms - Part 2: Fillers and Reinforcing Materials Second Edition
Plastics - Symbols and Abbreviated Terms - Part 3: Plasticizers Second Edition
Plastics - Symbols and Abbreviated Terms - Part 4: Flame Retardants First Edition
Industrial Trucks - Lead-Acid Traction Batteries for Electric Trucks - Preferred Voltages Third Edition
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Vibrating Conveyors and Feeders with Rectangular or
Trapezoidal Trough First Edition
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Screw Conveyors First Edition
Rivet Shank Diameters First Edition; Cancels and Replaces ISO Recommendation R 1051: 1969
Steels for General Engineering Purposes First Edition; Corrected and Reprinted - 1983
Zinc - Determination of Copper Content - Spectrophotometric Method First Edition
Zinc - Determination of Cadmium Content - Polarographic Method First Edition
Zinc and Zinc Alloys - Determination of Iron Content - Spectrophotometric Method First Edition
Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Part 1: Designation System and Basis for Specifications Second
Edition
Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Part 2: Preparation of Test Samples and Determination of
Properties Third Edition
Plastics - Unplasticized Cellulose Acetate - Determination of Free Acidity Second Edition
Surface Active Agents - Determination of Stability in Hard Water First Edition
Surface Active Agents - Determination of Apparent Density of Pastes on Filling First Edition
Non-Ionic Surface-Active Agents Obtained from Ethylene Oxide and Mixed Non-Ionic Surface-Active Agents - Determination of Cloud
Point Second Edition
Analysis of Soaps - Determination of Glycerol Content - Titrimetric Method First Edition
Analysis of Soaps - Determination of Unsaponifiable, Unsaponified and Unsaponified Saponifiable Matter First Edition
Plastics - PVC Resins - Determination of Compacted Apparent Bulk Density First Edition;
Magnetic Compasses and Binnacles for Sea Navigation - Vocabulary First Edition
Liquid Flow Measurement in Open Channels - Slope-Area Method Second Edition; Amendment 1-1997
Welding consumables Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron Classification
Second Edition
Solid Wood Parquet - General Characteristics First Edition
Alphanumeric Character Sets for Optical Recognition - Part 1: Character Set OCR-A - Shapes and Dimensions of the Printed Image
First Edition; Amendment Slip-1978
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1073-2
1074
1080
1081
1082
1083
1085
1086
ISO
1087-1
ISO
ISO
ISO
ISO
ISO
ISO
1087-2
1089
1096
1098
1099
1100-1
ISO
1100-2
ISO
ISO
ISO
1101
1102
1103
Alphanumeric Character Sets for Optical Recognition - Part II: Character Set OCR-B - Shapes and Dimensions of the Printed Image
First Edition; Amendment Slip-1978
Counterbalanced Fork-Lift Trucks - Stability Tests Second Edition
Machine Tools - Morse Taper Shanks - Cotter Slots with Taper Keys First Edition
Belt Drives - V-Belts and V-Ribbed Belts, and Corresponding Grooved Pulleys - Vocabulary Second Edition
Mining - Shackle Type Connector Units for Chain Conveyors Second Edition
Spheroidal graphite cast irons Classification Third Edition
Assembly Tools for Screws and Nuts - Double-Ended Wrenches - Size Pairing Third Edition
Information and Documentation - Title Leaves of Books Second Edition
Terminology Work - Vocabulary - Part 1: Theory and Application Travaux Terminologiques - Vocabulaire - Partie 1: Theorie Et
Application First Edition
Terminology - Vocabulary - Part 2: Computer Applications Terminologie - Vocabulaire - Partie 2: Applications Logicielles First Edition;
Replaces ISO 1087
Electrode Taper Fits for Spot Welding Equipment - Dimensions First Edition
Plywood - Classification Second Edition
Veneer Plywood for General Use - General Requirements First Edition
Metallic materials Fatigue testing Axial force-controlled method Second Edition
Measurement of Liquid Flow in Open Channels - Part 1: Establishment and Operation of a Gauging Station Second Edition
Measurement of Liquid Flow in Open Channels - Part 2: Determination of the Stage-Discharge Relation Second Edition; Technical
Corrigendum 1: 08/01/2000
Geometrical Product Specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out Second
Edition
Commercial Road Vehicles - 50 mm Drawbar Eye - Interchangeability Thrid Edition
Road Vehicles - Coupling Balls for Caravans and Light Trailers - Dimensions Fourth Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1104
1107
1108
1110
1112
1113
1114
1118
1119
1120
Surface Active Agents - Technical Sodium Alkylarylsulphonates (Excluding Benzene Derivatives) - Methods of Analysis First Edition
Fishing nets Netting Basic terms and definitions Second Edition
Spices and Condiments - Determination of Non-Volatile Ether Extract Second Edition
Plastics - Polyamides - Accelerated Conditioning of Test Specimens Third Edition
Horology - Functional and Non-Functional Jewels Second Edition
Information Processing - Representation of the 7-Bit Coded Character Set on Punched Tape Second Edition
Cocoa Beans - Cut Test First Edition; PNS 919: 1993
Aluminium and Aluminium Alloys - Determination of Titanium - Spectrophotometric Chromotropic Acid Method First Edition
Geometrical Product Specifications (GPS) - Series of Conical Tapers and Taper Angles Second Edition
Conveyor Belts - Determination of Strength of Mechanical Fastenings - Static Test Method Third Edition
ISO
1122-1
ISO
ISO
ISO
ISO
1122-2
1125
1126
1127
ISO
ISO
1129
1130
ISO
1132-1
ISO
1132-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1133
1134
1135-3
1135-4
1136
1138
1139
1140
1141
1143
ISO
ISO
ISO
1144
1146
1147
ISO
ISO
1150
1151-1
ISO
1151-2
ISO
1151-3
Vocabulary of Gear Terms - Part 1: Definitions Related to Geometry Vocabulaire Des Engrenages - Partie 1: Definitions
Geometriques Second Edition; Corrigendum 1: 11-01-99
Vocabulary of Gear Terms - Part 2: Definitions Related to Worm Gear Geometry Vocabulaire des Engrenages - Partie 2: Definitions
Geometriques Relatives aux Engrenages a Vis First Edition
Rubber Compounding Ingredients - Carbon Black - Determination of Ash Third Edition
Rubber compounding ingredients Carbon black Determination of loss on heating Fourth Edition
Stainless Steel Tubes - Dimensions, Tolerances and Conventional Masses per Unit Length Third Edition
Steel Tubes for Boilers, Superheaters and Heat Exchangers - Dimensions, Tolerances and Conventional Masses per Unit Length
Second Edition
Textile Fibres - Some Methods of Sampling for Testing First Edition;
Rolling Bearings - Tolerances Part 1: Terms and Definitions Roulements - Tolerances - Partie 1: Termes Et Definitions First Edition;
Replaces ISO 1132
Rolling Bearings - Tolerances Part 2: Measuring and Gauging Principles and Methods First Edition; Cancels and Replaces ISO/TR
9274:1991
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics Fourth edition
Pears - Cold Storage Second Edition
Transfusion Equipment for Medical Use - Part 3: Blood-Taking Set First Edition
Transfusion equipment for medical use Part 4: Transfusion sets for single use Third Edition
Wool - Determination of Mean Diameter of Fibres - Air Permeability Method First Edition
Rubber compounding ingredients ù Carbon black ù Determination of sulfur content Second Edition
Textiles - Designation of Yarns First Edition
Fibre ropes Polyamide 3-, 4- and 8-strand ropes Third Edition
Ropes - Polyester - Specification Third Edition
Metals - Rotating Bar Bending Fatigue Testing First Edition
Textiles - Universal System for Designating Linear Density (Tex System) First Edition; Replaces ISO R 138: 1960 and ISO R 271:
1962
Pyrometric Reference Cones for Laboratory Use - Specification First Edition
Plastics/Rubber - Polymer Dispersions and Synthetic Rubber Latices - Freeze-Thaw Cycle Stability Test Third Edition
Textile Machinery and Accessories - Drop Wires for Warp Stop Motions for Weaving Machines with Automatic Drawing-In Second
Edition
Flight Dynamics - Concepts, Quantities and Symbols - Part 1: Aircraft Motion Relative to the Air Fourth Edition
Flight Dynamics - Concepts, Quantities and Symbols - Part 2: Motions of the Aircraft and the Atmosphere Relative to the Earth
Second Edition; Addendum 1-1987
Flight Dynamics - Concepts, Quantities and Symbols - Part 3: Derivatives of Forces, Moments and Their Coefficients Second Edition;
Corrigendum 1-1996
ISO
ISO
ISO
ISO
1151-4
1151-5
1151-6
1151-7
ISO
1151-8
ISO
ISO
1151-9
1154
ISO
ISO
ISO
ISO
1155
1158
1161 AMD 1
1161
ISO
1163-1
ISO
1163-2
ISO
1167-1
ISO
ISO
ISO
ISO
1167-2
1169
1170
1171
ISO
1172
ISO
ISO
ISO
ISO
1173
1174-1
1174-2
1176
Flight Dynamics - Concepts, Quantities and Symbols - Part 4: Concepts, Quantities and Symbols Used in the Study of Aircraft
Stability and Control Second Edition
Flight Dynamics - Concepts, Quantities and Symbols - Part 5: Quantities Used in Measurements Second Edition
Terms and Symbols for Flight Dynamics - Part 6: Aircraft Geometry Second Edition; Amendment 1-1984
Flight Dynamics - Concepts, Quantities and Symbols - Part 7: Flight Points and Flight Envelopes First Edition
Flight Dynamics - Concepts, Quantities and Symbols - Part 8: Concepts and Quantities Used in the Study of the Dynamic Behaviour
of the Aircraft First Edition
Flight Dynamics - Concepts, Quantities and Symbols - Part 9: Models of Atmospheric Motions Along the Trajectory of the Aircraft First
Edition; Amendment 1 10-01-1998
Information Processing - Punched Paper Tape - Dimensions and Location of Feed Holes and Code Holes First Edition
Information Processing - Use of Longitudinal Parity to Detect Errors in Information Messages Second Edition; NZS/ISO 1155: 1978
Plastics - Vinyl Chloride Homopolymers and Copolymers - Determination of Chlorine Content Third Edition
Series 1 freight containers ù Corner fittings ù Specification AMENDMENT 1: 45 ft containers Fourth Edition
Series 1 Freight Containers - Corner Fittings - Specification Fourth Edition; Corrigendum 1-1990; AS/NZS 3711.3: 1993
Plastics - Unplasticized Poly(Vinyl Chloride) (PVC-U) Moulding and Extrusion Materials - Part 1: Designation System and Basis for
Specifications Third Edition
Plastics - Unplasticized Poly(Vinyl Chloride) (PVC-U) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and
Determination of Properties Second Edition
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part
1: General method First Edition; Together with ISO 1167-2 Supersedes ISO 1167: 1996 and Together with ISO 1167-3 Supersedes
ISO 12092: 2000
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part
2: Preparation of pipe test pieces First Edition; Together with ISO 1167-1 Supersedes ISO 1167: 1996 and Together with ISO 1167-3
Supersedes ISO 12092: 2000
Zinc alloys Determination of aluminium content Titrimetric method Second Edition
Coal and Coke - Calculation of Analyses to Different Bases First Edition; PNS 289-17: 1990
Solid Mineral Fuels - Determination of Ash Content Third Edition; Technical Corrigendum 1: 11-15-1998
Textile-Glass-Reinforced Plastics - Prepregs, Moulding Compounds and Laminates - Determination of the Textile-Glass and MineralFiller Content - Calcination Methods Second Edition
Assembly Tools for Screws and Nuts - Drive Ends for Hand- and Machine-Operated Screwdriver Bits and Connecting Parts Dimensions, Torque Testing Third Edition
Assembly Tools for Screws and Nuts - Driving Squares - Part 1: Driving Squares for Hand Socket Tools First Edition
Assembly Tools for Screws and Nuts - Driving Squares - Part 2: Driving Squares for Power Socket Tools First Edition
Road Vehicles - Masses - Vocabulary and Codes Second Edition
ISO
ISO
1177
1178
ISO
1179-1
Information Processing - Character Structure for Start/Stop and Synchronous Character Oriented Transmission Second Edition
Magnesium Alloys - Determination of Soluble Zirconium - Alizarin Sulphonate Photometric Method Second Edition
Connections for general use and fluid power ù Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing
ù Part 1: Threaded ports First Edition [Replaced: ISO 1179]
ISO
1179-2
Connections for general use and fluid power ù Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing
ù Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) First Edition [Replaced: ISO 1179]
ISO
1179-3
Connections for general use and fluid power ù Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing
ù Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) First Edition [Replaced: ISO 1179]
ISO
ISO
ISO
ISO
1179-4
1180
1181
1182
ISO
1183-1
ISO
ISO
1183-2
1183-3
ISO
1185
ISO
1188
ISO
ISO
ISO
ISO
1189
1190-1
1198
1203
ISO
1204
Connections for general use and fluid power ù Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing
ù Part 4: Stud ends for general use only with metal-to-metal sealing (type B) First Edition [Cancelled: ISO 1179]
Shanks for Pneumatic Tools and Dimensions of Chuck Bushings First Edition; Addendum 1-1985; NZS/ISO 1180: 1983
Fibre ropes Manila and sisal 3-, 4- and 8-strand ropes Third Edition
Reaction to Fire Tests for Building Products - Non-Combustibility Test Fourth Edition
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and
titration method First Edition; Together with 1183-2 and 1183-3 replaces 1183:1987
Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method First Edition; Replaces
ISO 1183:1987
Plastics - Methods for Determining the Density of Non-Cellular Plastics - Part 3: Gas Pyknometer Method First Edition
Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 N (normal) for
vehicles with 24 V nominal supply voltage Third Edition
Cinematography - Recorded Characteristic for Magnetic Sound on Full-Coat 16 mm Motion-Picture Film - Specifications Second
Edition
Cinematography - Recorded Characteristic for Magnetic Sound Records on 35 mm Motion-Picture Film Excluding Striped Release
Prints - Specifications Second Edition
Copper and Copper Alloys - Code of Designation - Part 1: Designation of Materials First Edition
Sealed-Beam Landing Lamps for Aircraft - Dimensions First Edition
Photography - Roll Film Cameras - Back Window Location Fourth Edition
Reciprocating Internal Combustion Engines - Designation of the Direction of Rotation and of Cylinders and Valves in Cylinder Heads,
and Definition of Right-Hand and Left-Hand In-Line Engines and Locations on an Engine Second Edition
ISO
ISO
1206
1207
Rolling Bearings - Needle Roller Bearings, Dimension Series 48,49 and 69 - Boundary Dimensions and Tolerances Third Edition
Slotted Cheese Head Screws - Product Grade A Third Edition; CEN EN ISO 1207
ISO
ISO
1208
1209-1
ISO
ISO
ISO
ISO
ISO
1209-2
1211
1212
1213-1
1213-2
ISO
ISO
ISO
1215
1216
1217
ISO
ISO
ISO
ISO
ISO
1219-1
1219-2
1222 CORR 1
1222
1223
ISO
1224-1
ISO
ISO
1224-2
1230
ISO
ISO
ISO
1232
1234
1237
ISO
ISO
ISO
ISO
ISO
1241
1242
1247
1248 TECH COR
1248
ISO
ISO
1249
1264
Spices and Condiments - Determination of Filth First Edition
Rigid cellular plastics ù Determination of flexural properties ù Part 1: Basic bending test Third Edition
Rigid cellular plastics Determination of flexural properties Part 2: Determination of flexural strength and apparent flexural modulus of
elasticity Third Edition
Milk - Determination of Fat Content - Gravimetric Method (Reference Method) Second Edition
Apples - Cold Storage Second Edition
Solid Mineral Fuels - Vocabulary - Part 1: Terms Relating to Coal Preparation Second Edition
Solid Mineral Fuels - Vocabulary - Part 2: Terms Relating to Sampling, Testing and Analysis First Edition
Commercially Dry Virgin Cork, Ramassage, Gleanings, Corkwood Refuse and Corkwaste - Definitions and Packaging Second Edition
Corkwood in Planks - Grading, Classification and Packing Third Edition
Displacement Compressors - Acceptance Tests Third Edition; BS 1571: Part 1: 1987; NZS/BS 1571: PT 1: 1987
Fluid power systems and components Graphic symbols and circuit diagrams Part 1: Graphic symbols for conventional use and dataprocessing applications Second Edition
Fluid Power Systems and Components - Graphic Symbols and Circuit Diagrams - Part 2: Circuit Diagrams First Edition
Photography ù Tripod connections TECHNICAL CORRIGENDUM 1 Third Edition
Photography - Tripod Connections Third Edition
Cinematography - Picture Areas for Motion-Picture Films for Television - Position and Dimensions Fourth Edition
Rolling bearings ù Instrument precision bearings ù Part 1: Boundary dimensions, tolerances and characteristics of metric series
bearings First Edition [Cancelled: ISO 1224]
Rolling bearings ù Instrument precision bearings ù Part 2: Boundary dimensions, tolerances and characteristics of inch series
bearings FIRST EDITION [Cancelled: ISO 1224]
Photography - Determination of Flash Guide Numbers Third Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Silica Content - Reduced Molybdosilicate
Spectrophotometric Method First Edition
Split Pins Second Edition
Mustard Seed - Specification Second Edition
Essential Oils - Determination of Ester Values, Before and After Acetylation, and Evaluation of the Contents of Free and Total
Alcohols Second Edition
Essential Oils - Determination of Acid Value Second Edition
Aluminium Pigments for Paints First Edition; Amendment 1-1982
Iron oxide pigments Specifications and methods of test
Iron oxide pigments Specifications and methods of test Second Edition
Zinc Chromate Pigments - Basic Zinc Potassium Chromate Pigments and Zinc Tetrahydroxychromate Pigments First Edition;
Corrigendum 1-1992
Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Determination of pH of Aqueous Extract Second Edition
ISO
ISO
1265
1268-1
Plastics ù Poly(vinyl chloride) resins ù Determination of number of impurities and foreign particles Second Edition
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 1: General Conditions First Edition
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 2: Contact and Spray-Up Moulding First Edition; Cancels and
Replaces ISO 1268: 1974
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 3: Wet Compression Moulding First Edition
ISO
ISO
1268-2
1268-3
ISO
1268-4
ISO
ISO
ISO
1268-5
1268-6
1268-7
ISO
ISO
1268-8
1268-9
ISO
1268-10
ISO
ISO
1268-11
1269
ISO
ISO
1271
1272
Essential Oils - Determination of Carbonyl Value - Free Hydroxylamine Method Second Edition; Corrected and Reprinted - 1985
Essential Oils - Determination of Content of Phenols Second Edition
ISO
ISO
1275
1279
Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors Fourth Edition
Essential Oils - Determination of Carbonyl Value - Potentiometric Methods Using Hydroxylammonium Chloride Third Edition
ISO
ISO
ISO
1302
1304
1306
ISO
ISO
1307
1324
ISO
1328-1
ISO
1328-2
Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product Documentation Fourth Edition
Rubber compounding ingredients Carbon black Determination of iodine adsorption number Fourth Edition
Rubber Compounding Ingredients - Carbon Black (Pelletized) - Determination of Pour Density Fourth Edition
Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses Fourth
Edition
Solid Wood Parquet - Classification of Oak Strips First Edition
Cylindrical Gears - ISO System of Accuracy - Part 1: Definitions and Allowable Values of Deviations Relevant to Corresponding
Flanks of Gear Teeth First Edition; Corrected and Reprinted - 02/01/1997
Cylindrical Gears - ISO System of Accuracy - Part 2: Definitions and Allowable Values of Deviations Relevant to Radial Composite
Deviations and Runout Information First Edition
Fibre-reinforced plastics Methods of producing test plates Part 4: Moulding of prepregs First Edition; Replaces ISO 9353: 1991
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 5: Filament Winding First Edition; Cancels and Replaces ISO
9291:1996
Fibre-Reinforced Plastics Methods of Producing Test Plates Part 6: Pultrusion Moulding First Edition
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 7: Resin Transfer Moulding First Edition
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 8: Compression moulding of SMC and BMC First Edition
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 9: Moulding of GMT/STC First Edition
Fibre-reinforced plastics Methods of producing test plates Part 10: Injection moulding of BMC and other long-fibre moulding
compounds General principles and moulding of multipurpose test specimens First Edition; Replaces ISO 1268: 1974
Fibre-reinforced plastics Methods of producing test plates Part 11: Injection moulding of BMC and other long-fibre moulding
compounds Small plates First Edition; Replaces ISO 1268: 1974
Plastics Homopolymer and copolymer resins of vinyl chloride Determination of volatile matter (including water) Third Edition
ISO
1340
ISO
ISO
1341
1342
ISO
ISO
ISO
ISO
ISO
ISO
1346
1352
1361
1382
1385-1
1388-1
ISO
1388-2
ISO
1388-3
ISO
1388-4
ISO
ISO
1388-5
1388-6
ISO
1388-7
ISO
1388-8
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1388-9
1388-10
1388-11
1388-12
1392
1401
1402
1403
1407 CORR 1
1407
Cylindrical Gears - Information to Be Given to the Manufacturer by the Purchaser in Order to Obtain the Gear Required First Edition
Straight Bevel Gears - Information to Be Given to the Manufacturer by the Purchaser in Order to Obtain the Gear Required First
Edition
Oil of Rosemary (Rosmarinus Officinalis Linnaeus) Second Edition
Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) 3-, 4and 8-strand ropes Third Edition
Steel - Torsional Stress Fatigue Testing First Edition
Light-Gauge Metal Containers - Round Open-Top Cans - Internal Diameters Fourth Edition
Rubber - Vocabulary Caoutchouc - Vocabulaire Fourth Edition
Phthalate Esters for Industrial Use - Methods of Test - Part I: General First Edition
Ethanol for Industrial Use - Methods of Test - Part 1: General First Edition
Ethanol for Industrial Use - Methods of Test - Part 2: Detection of Alkalinity or Determination of Acidity to Phenolphthalein First Edition
Ethanol for Industrial Use - Methods of Test - Part 3: Estimation of Content of Carbonyl Compounds Present in Small Amounts Photometric Method First Edition
Ethanol for Industrial Use - Methods of Test - Part 4: Estimation of Content of Carbonyl Compounds Present in Moderate Amounts Titrimetric Method First Edition
Ethanol for Industrial Use - Methods of Test - Part 5: Determination of Aldehydes Content - Visual Colorimetric Method First Edition
Ethanol for Industrial Use - Methods of Test - Part 6: Test for Miscibility with Water First Edition
Ethanol for Industrial Use - Methods of Test - Part 7: Determination of Methanol Content (Methanol Contents between 0,01 and 0,20
% (V/V)) - Photometric Method First Edition
Ethanol for Industrial Use - Methods of Test - Part 8: Determination of Methanol Content (Methanol Contents between 0,10 and 1,50
% (V/V)) - Visual Colorimetric Method First Edition
Ethanol for Industrial Use - Methods of Test - Part 9: Determination of Esters Content - Titrimetric Method After Saponification First
Edition
Ethanol for Industrial Use - Methods of Test - Part 10: Estimation of Hydrocarbons Content - Distillation Method First Edition
Ethanol for Industrial Use - Methods of Test - Part 11: Test for Detection of Furfural First Edition
Ethanol for Industrial Use - Methods of Test - Part 12: Determination of Permanganate Time First Edition
Determination of Crystallizing Point - General Method First Edition
Rubber Hoses for Agricultural Spraying Third Edition
Rubber and Plastic Hoses and Hose Assemblies - Hydrostatic Testing Third Edition; CEN EN ISO 1402: 1996
Rubber Hoses, Textile-Reinforced, for General-Purpose Water Applications - Specification Fourth edition
Rubber ù Determination of solvent extract
Rubber - Determination of Solvent Extract Second Edition
ISO
1408
ISO
ISO
ISO
ISO
ISO
1409
1413
1419
1420
1421
ISO
1431-1
ISO
1431-3
ISO
ISO
ISO
1432
1434
1435
ISO
1436-1
ISO
ISO
1436-2
1437
ISO
ISO
ISO
ISO
ISO
1438-1
1442
1443
1444
1446
ISO
ISO
1456
1458
ISO
ISO
ISO
ISO
ISO
ISO
1460
1461
1463
1464
1465
1466
Rubber - Determination of Carbon Black Content - Pyrolytic and Chemical Degradation Methods Third Edition
Plastics/rubber Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method
Fifth Edition
Horology - Shock-Resistant Watches Second Edition
Rubber- or Plastics-Coated Fabrics - Accelerated-Ageing Tests Second Edition
Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Penetration by Water Third Edition
Rubber- or Plastics-Coated Fabrics - Determination of Tensile Strength and Elongation at Break Second Edition
Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing Fourth Edition; Replaces
ISO 1431-2: 1/15/1994
Rubber, Vulcanized or Thermoplastic - Resistance to Ozone Cracking - Part 3: Reference and Alternative Methods for Determining
the Ozone Concentration in Laboratory Test Chambers First Edition
Rubber, Vulcanized or Thermoplastic - Determination of Low Temperature Stiffening (Gehman Test) Third Edition; Corrigendum 1:
8/1/2003
Natural Rubber in Bales - Amount of Bale Coating - Determination Second Edition
Rubber Compounding Ingredients - Carbon Black (Pelletized) - Determination of Fines Content Fourth Edition
Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 1: Oil-based fluid applications First
Edition
Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 2: Water-based fluid applications First
Edition
Rubber compounding ingredients ù Carbon black ù Determination of sieve residue Fourth edition
Water Flow Measurement in Open Channels Using Weirs and Venturi Flumes - Part 1: Thin-Plate Weirs First Edition; Amendment 11998
Meat and Meat Products - Determination of Moisture Content (Reference Method) Second Edition
Meat and Meat Products - Determination of Total Fat Content First Edition; PNS 570: 1992
Meat and Meat Products - Determination of Free Fat Content Second Edition
Green Coffee - Determination of Water Content Basic Reference Method Second Edition
Metallic Coatings - Electrodeposited Coatings of Nickel Plus Chromium and of Copper Plus Nickel Plus Chromium Third Edition
Metallic coatings Electrodeposited coatings of nickel Third Edition
Metallic Coatings - Hot Dip Galvanized Coatings on Ferrous Materials - Gravimetric Determination of the Mass per Unit Area Second
Edition
Hot Dip Galvanized Coatings on Fabricated Iron and Steel Articles - Specifications and Test Method Second Edition
Metallic and Oxide Coatings - Measurement of Coating Thickness - Microscopical Method Third Edition
Aerospace - Tripod Jacks - Clearance Dimensions Second Edition
Aircraft - Liquid Oxygen Replenishment Couplings - Mating Dimensions Second Edition
Lever-Operated Manual Switches for Aircraft - Performance Requirements First Edition
ISO
ISO
ISO
ISO
1467
1478
1479
1481
General Purpose Push-Pull Single-Pole Circuit-Breakers for Aircraft - Performance Requirements First Edition
Tapping Screws Thread Second Edition
Hexagon Head Tapping Screws First Edition; CEN EN ISO 1479: 1994; AS/NZS 4402: 1996
Slotted Pan Head Tapping Screws First Edition; CEN EN ISO 1481: 1994; AS/NZS 4403: 1996
ISO
1482
ISO
1483
Slotted Countersunk (Flat) Head Tapping Screws (Common Head Style) First Edition; CEN EN ISO 1482: 1994; AS/NZS 4404: 1996
Slotted Raised Countersunk (Oval) Head Tapping Screws (Common Head Style) First Edition; CEN EN ISO 1483: 1994; AS/NZS
4405: 1996
ISO
1496-1
Series 1 freight containers Specification and testing Part 1: General cargo containers for general purposes Fifth Edition; Amendment
1: 03/01/93; Amendment 2: 07/01/98; Amendment 3: 06/15/05; Amendment 5: 05/15/06; Amendment 4: 11/01/06
ISO
1496-2
ISO
1496-3
ISO
1496-4
Series 1 Freight Containers - Specification and Testing - Part 2: Thermal Containers Fourth Edition; Amendment 1: 02/01/2006
Series 1 Freight Containers - Specification and Testing - Part 3: Tank Containers for Liquids, Gases and Pressurized Dry Bulk Fourth
Edition; Amendment 1: 02/01/2006
Series 1 Freight Containers - Specification and Testing - Part 4: Non-Pressurized Containers for Dry Bulk First Edition; Amendment 11994; Technical Corrigendum 1: 03/01/2006
ISO
ISO
ISO
1496-5
1502
1503
Series 1 Freight Containers - Specification and Testing - Pt 5: Platform and Platform-Based Containers Amendment 1: 1AAA and
1BBB Containers Second Edition; Amendment 1-1993; Amendment 2-1994; AS/NZS 3711.8: 1993; PNS 924-5: 1992
ISO General-Purpose Metric Screw Threads - Gauges and Gauging Second Edition
Geometrical Orientation and Directions of Movements First Edition
ISO
ISO
ISO
1505
1506
1509
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1513
1514
1516
1517
1518
1519
1520
1522
1523
Textile Machinery - Widths Relating to Dyeing and Finishing Machines - Definitions and Range of Nominal Widths Second Edition
Textile Machinery - Dyeing, Finishing and Allied Machinery - Classification and Nomenclature First Edition
General Purpose Push-Pull Three-Pole Circuit-Breakers for Aircraft - Performance Requirements First Edition
Paints and Varnishes - Examination and Preparation of Samples for Testing Third Edition; Corrigendum 1-1994; CEN EN ISO 1513:
1994; AS/NZS 1580.103.1: 1995
Paints and Varnishes - Standard Panels for Testing Fourth Edition
Determination of Flash/No Flash Test - Closed Cup Equilibrium Method Third Edition
Paints and Varnishes - Surface-Drying Test - Ballotini Method First Edition
Paints and Varnishes - Scratch Test Second Edition
Paints and Varnishes - Bend Test (Cylindrical Mandrel) Second Edition
Paints and Varnishes - Cupping Test Third Edition
Paints and Varnishes - Pendulum Damping Test Third Edition
Determination of Flashpoint - Closed Cup Equilibrium Method Third Edition
ISO
ISO
ISO
ISO
1524
1530
1531
1532
ISO
1535
ISO
1536
ISO
ISO
ISO
ISO
ISO
1537
1539-1 CORR 2
1539-1 CORR 1
1539-1
1539-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1539-3
1540
1546
1547
1548
1549
1552
Paints, Varnishes and Printing Inks - Determination of Fineness of Grind Third Edition
Fishing Nets - Description and Designation of Knotted Netting Second Edition
Fishing Nets - Hanging of Netting - Basic Terms and Definitions First Edition
Fishing Nets - Cutting Knotted Netting to Shape (Tapering") First Edition"
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Troughed Belt Conveyors (Other Than Portable Conveyors) Belts First Edition
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Troughed Belt Conveyors (Other Than Portable Conveyors) Belt Pulleys First Edition
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Troughed Belt Conveyors (Other Than Portable Conveyors) Idlers First Edition
Information Technology - Programming Languages - Fortran - Part 1: Basic Language Second Edition
Information technology ù Programming languages ù Fortran ù Part 1: Base language Second edition
Information Technology - Programming Languages - Fortran - Part 1: Basic Language Second Edition
Information Technology - Programming Languages - FORTRAN - Part 2: Varying Length Character Strings Second Edition
Information Technology - Programming Languages - Fortran - Part 3: Conditional Compilation First Edition; Corrected and Reprinted
12/15/2000
Aerospace - Characteristics of Aircraft Electrical Systems Third Edition
Procedure for Milk Recording for Cows First Edition
Aircraft - Precision Fuse-Links - General Requirements First Edition
Aircraft - Precision Fuse-Links - Type A First Edition
Aircraft - Precision Fuse-Links - Type B First Edition
Liquid Chlorine for Industrial Use - Method of Sampling (for Determining Only the Volumetric Chlorine Content) First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1553
1554
1559
1560
1563
1564
1567
1570
1572
1573
1575
1576
1577
Unalloyed Copper Containing Not Less Than 99,90 % of Copper - Determination of Copper Content - Electrolytic Method First Edition
Wrought and Cast Copper Alloys - Determination of Copper Content - Electrolytic Method First Edition
Dental Materials - Alloys for Dental Amalgam Third Edition; Corrigendum 1: 1997 [Replaced By: ISO 24234]
Dental Mercury Second Edition; CAN/CSA-Z349.17-M92 [Replaced By: ISO 24234]
Dental Alginate Impression Material Second Edition; CAN/CSA-Z349.38-93
Dental Aqueous Impression Materials Based on Agar Second Edition; CAN/CSA-Z349.20-M92
Dentistry - Denture Base Polymers Third Edition; Amendment 1: 09/01/2003
Zinc and Zinc Alloys - Determination of Tin Content - Spectrophotometric Method First Edition
Tea - Preparation of Ground Sample of Known Dry Matter Content Second Edition
Tea - Determination of Loss in Mass at 103 Degrees C Second Edition
Tea - Determination of Total Ash Third Edition
Tea - Determination of Water-Soluble Ash and Water-Insoluble Ash Second Edition
Tea - Determination of Acid-Insoluble Ash Second Edition
ISO
ISO
ISO
1578
1580
1585
Tea - Determination of Alkalinity of Water-Soluble Ash First Edition
Slotted Pan Head Screws - Product Grade A Second Edition; CEN EN ISO 1580: 1994
Road Vehicles - Engine Test Code - Net Power Third Edition
ISO
ISO
ISO
ISO
1586
1587
1598
1599
ISO
1600
Textile Machinery and Accessories - Shuttles - Terms and Designation in Relation to the Position of the Shuttle Eye First Edition
Gypsum Rock for the Manufacture of Binders - Specifications First Edition
Plastics - Cellulose Acetate - Determination of Insoluble Particles Second Edition
Plastics - Cellulose Acetate - Determination of Viscosity Loss on Moulding Second Edition
Plastics - Cellulose Acetate - Determination of Light Absorption on Moulded Specimens Produced Using Different Periods of Heating
Second Edition
ISO
1604
ISO
1607-1
ISO
1607-2
ISO
1608-1
ISO
ISO
1608-2
1609
ISO
1617
ISO
ISO
1618
1619
ISO
1620
ISO
1622-1
ISO
ISO
1622-2
1624
ISO
1628-1
Belt Drives - Endless Wide V-Belts for Industrial Speed-Changers and Groove Profiles for Corresponding Pulleys Second Edition
Positive-Displacement Vacuum Pumps - Measurement of Performance Characteristics - Part 1: Measurement of Volume Rate of
Flow (Pumping Speed) Second Edition
Positive-Displacement Vacuum Pumps - Measurement of Performance Characteristics - Part 2: Measurement of Ultimate Pressure
Second Edition
Vapour Vacuum Pumps - Measurement of Performance Characteristics - Part 1: Measurement of Volume Rate of Flow (Pumping
Speed) Second Edition
Vapour Vacuum Pumps - Measurement of Performance Characteristics - Part 2: Measurement of Critical Backing Pressure Second
Edition
Vacuum Technology - Flange Dimensions First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Sodium Content - Flame Emission
Spectrophotometric Method First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Vanadium Content - N-Benzoyl-NPhenylhydroxylamine Photometric Method First Edition
Cryolite, Natural and Artificial - Preparation and Storage of Test Samples First Edition
Cryolite, Natural and Artificial - Determination of Silica Content - Reduced Molybdosilicate Spectrophotometric Method First Edition
Plastics - Polystyrene (PS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Second
Edition
Plastics - Polystyrene (PS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties
Second Edition
Plastics - Vinyl Chloride Homopolymer and Copolymer Resins - Sieve Analysis in Water Second Edition
Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 1: General Principles
Second Edition
Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 2: Poly(Vinyl Chloride) Resins
Second Edition
Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 3: Polyethylenes and
Polypropylenes Second Edition
Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 4: Polycarbonate (PC)
Moulding and Extrusion Materials Second Edition
Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 5: Thermoplastic Polyester
(TP) Homopolymers and Copolymers Second Edition
ISO
1628-2
ISO
1628-3
ISO
1628-4
ISO
1628-5
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1628-6
1629
1641-1
1641-2
1641-3
1651
1652
1656
1657
1658
1660
1663
1666
1673
1675
1680
1681
1683
1684
1686
1689
ISO
1690
Plastics - Determination of Viscosity Number and Limiting Viscosity Number - Part 6: Methyl Methacrylate Polymers First Edition
Rubber and Latices - Nomenclature Third Edition
End Mills and Slot Drills - Part 1: Milling Cutters with Cylindrical Shanks Second Edition
End Mills and Slot Drills - Part II: Milling Cutters with Morse Taper Shanks First Edition
End Mills and Slot Drills - Part 3: Milling Cutters with 7/24 Taper Shanks Second Edition
Tube Drawing Mandrels First Edition; Amendment 1-1982
Rubber latex Determination of apparent viscosity by the Brookfield test method Third Edition
Rubber, Raw Natural, and Rubber Latex, Natural - Determination of Nitrogen Content Third Edition
Rubber, Raw and Rubber Latex - Determination of Iron Content - 1,10-Phenanthroline Photometric Method Second Edition
Natural Rubber (NR) - Evaluation Procedure Second Edition
Technical Drawings - Dimensioning and Tolerancing of Profiles Second Edition; CEN EN ISO 1660: 1995
Rigid cellular plastics ù Determination of water vapour transmission properties Third edition
Starch - Determination of Moisture Content - Oven-Drying Method Second Edition
Onions - Guide to Storage Second Edition
Plastics - Liquid Resins - Determination of Density by the Pyknometer Method Second Edition
Acoustics - Test Code for the Measurement of Airborne Noise Emitted by Rotating Electrical Machines First Edition
Information Processing - Unpunched Paper Cards - Specification First Edition
Acoustics - Preferred Reference Quantities for Acoustic Levels First Edition; BS EN 21683; CEN EN 21683: 1994
Wire, Bar and Tube Drawing Dies - Specifications First Edition; Amendment 2-1982
Sodium and Potassium Silicates for Industrial Use - Samples and Method of Test - General First Edition
Sodium and Potassium Silicates for Industrial Use - Calculation of the Ratio SiO2/Na2O or SiO2/K2O First Edition
Sodium and Potassium Silicates for Industrial Use - Determination of Silica Content - Gravimetric Method by Insolubilization First
Edition
ISO
ISO
ISO
1691
1692
1693
Sodium and Potassium Silicates for Industrial Use - Determination of Carbonates Content - Gas-Volumetric Method First Edition
Sodium and Potassium Silicates for Industrial Use - Determination of Total Alkalinity - Titrimetric Method First Edition
Cryolite, Natural and Artificial - Determination of Fluorine Content - Modified Willard-Winter Method First Edition
ISO
ISO
1694
1700
ISO
1701-1
ISO
1701-2
ISO
ISO
ISO
ISO
1703
1704
1708
1709
ISO
ISO
ISO
ISO
ISO
1711-1
1711-2
1716
1717
1718
ISO
1721
ISO
1722
ISO
1724
ISO
ISO
ISO
ISO
ISO
1726-2
1726 CORR 1
1726
1728
1730
ISO
ISO
1735
1736
ISO
ISO
ISO
1737
1738
1739
Cryolite, Natural and Artificial - Determination of Iron Content - 1,10-Phenanthroline Photometric Method First Edition
Cinematography - 8 mm Type S Motion-Picture Raw Stock Film - Cutting and Perforating Dimensions Third Edition
Test conditions for milling machines with table of variable height Testing of the accuracy Part 1: Machines with horizontal spindle
First Edition; Replaces ISO 1701-0: 6/1/1984 and ISO 1701-3:12/15/97
Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy - Part 2: Machines with Horizontal Spindle
Second Edition; Replaces ISO 1701-0: 6/1/1984 and ISO 1701-3: 12/15/1997
Assembly tools for screws and nuts Designation and nomenclature Outils de manoeuvre pour vis et Úcrous DÚsignation et
nomenclature Third Edition
Shipbuilding - Stud-Link Anchor Chains Second Edition
Acceptance Conditions for General Purpose Parallel Lathes - Testing of the Accuracy Fourth Edition
Nuclear Energy - Fissile Materials - Principles of Criticality Safety in Storing, Handling and Processing Second Edition
Assembly tools for screws and nuts ù Technical specifications ù Part 1: Hand-operated wrenches and sockets Second Edition
Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets (impact") First Edition"
Reaction to Fire Tests for Building Products - Determination of the Heat of Combustion Second Edition
Rock Drilling - Rotary Drill-Rods and Rotary Drill-Bits for Dry Drilling - Connecting Dimensions First Edition
Rock Drilling Equipment - Drill Rods with Tapered Connection for Percussive Drilling Second Edition
Rock Drilling - Extension Drill-Steel Equipment for Percussive Long-Hole Drilling - Reverse-Buttress-Threaded Equipments 1 1/16
and (27 and 32 mm) First Edition
Rock Drilling - Extension Drill-Steel Equipment for Percussive Long-Hole Drilling - Reverse-Buttress-Threaded Equipments 1 1/2 to 2
1/2 in (38 to 64 mm) First Edition
Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 12 N (normal) for
vehicles with 12 V nominal supply voltage Fourth Edition
Road vehicles ù Mechanical couplings between tractors and semi-trailers ù Part 2: Interchangeability between low-coupling tractors
and high-volume semi-trailers First edition
Road Vehicles - Mechanical Coupling between Tractors and Semi-Trailers - Interchangeability
Road Vehicles - Mechanical Coupling between Tractors and Semi-Trailers - Interchangeability Third Edition
Road vehicles Pneumatic braking connections between motor vehicles and towed vehicles Interchangeability Third Edition
Dictation Equipment - Basic Operating Requirements Second Edition
Cheese and processed cheese products Determination of fat content Gravimetric method (Reference method) Third Edition; IDF 5
Dried Milk and Dried Milk Products - Determination of Fat Content - Gravimetric Method (Reference Method) Third Edition
Evaporated Milk and Sweetened Condensed Milk - Determination of Fat Content - Gravimetric Method (Reference Method) Third
Edition
Butter - Determination of Salt Content Third Edition; IDF 12
Butter - Determination of the Refractive Index of the Fat (Reference Method) Second Edition; IDF 7: 2006
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1740
1741
1742
1743
1745
1746
1749
Milkfat products and butter - determination of fat acidity (Reference method) Third edition
Dextrose - Determination of Loss in Mass on Drying - Vacuum Oven Method First Edition; CEN EN ISO 1741: 1994
Glucose Syrups - Determination of Dry Matter - Vacuum Oven Method First Edition
Glucose Syrup - Determination of Dry Matter Content - Refractive Index Method Second Edition
Information Processing - Basic Mode Control Procedures for Data Communication Systems First Edition
Rubber or Plastics Hoses and Tubing - Bending Tests Third Edition; Corrigendum 1: 05/01/1999
Aircraft - Elastomeric Sealing Rings - Packaging and Identification First Edition
Pesticides and Other Agrochemicals - Common Names Produits Phytosanitaires Et Assimiles - Noms Communs First Edition;
Amendment 1-1982; Addendum 1-1983; Addendum 2-1983; Replaces ISO R 116: 1959 and ISO R 219: 1961 and ISO R 258: 1962;
Amendment 2: 11-15-99; Amendment 3 12/01/2001
Shipbuilding and Marine Structures - Ships Side Scuttles Second Edition
Photography - Cameras Using 35 mm Film and Roll Film - Picture Sizes Fourth Edition; Corrigendum 1: 03/01/2002
Photography - Projector Slides - Dimensions Second Edition
Industrial Trucks - Dimensions of Stillages - Connection Gauge First Edition
Personal Photographic Dosemeters Second Edition
Paper, Board and Pulps - Determination of Residue (Ash) on Ignition at 525 Degrees C Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1750
1751
1754
1755
1756
1757
1762
ISO
ISO
ISO
1763
1765
1766
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1768
1769
1770
1771
1772
1773
1775
ISO
1776
Carpets - Determination of Number of Tufts and/or Loops per Unit Length and per Unit Area Second Edition; AS/NZS 2111.9: 1996
Machine-Made Textile Floor Coverings - Determination of Thickness Second Edition; AS/NZS 2111.1: 1996
Textile Floor Coverings - Determination of Thickness of Pile Above the Substrate Third Edition
Glass Hydrometers - Conventional Value for the Thermal Cubic Expansion Coefficient (for Use in the Preparation of Measurement
Tables for Liquids) First Edition
Laboratory Glassware - Pipettes - Colour Coding First Edition
Solid-Stem General Purpose Thermometers First Edition; Amendment 1-1983
Enclosed-Scale General Purpose Thermometers First Edition; Amendment 1-1983
Laboratory Crucibles in Porcelain and Silica First Edition
Laboratory Glassware - Narrow-Necked Boiling Flasks Second Edition
Porcelain Laboratory Apparatus - Requirements and Methods of Test First Edition
Glass - Resistance to Attack by Hydrochloric Acid at 100 Degrees Celsius - Flame Emission or Flame Atomic Absorption
Spectrometric Method First Edition
ISO
ISO
ISO
ISO
1780
1781
1783
1784
Cinematography - Motion-Picture Camera Cartridge, 8 mm Type S Model I - Aperture, Camera Aperture Profile, Film Position,
Pressure Pad and Pressure Pad Flatness - Dimensions and Specifications Second Edition; Corrected and Reprinted - 1984
Cinematography - Projector Usage of 8 mm Type S Motion-Picture Film for Direct Front Projection Second Edition
Magnesium Alloys - Determination of Zinc - Volumetric Method First Edition
Aluminium Alloys - Determination of Zinc - EDTA Titrimetric Method First Edition
ISO
ISO
ISO
1785
1787
1791
ISO
ISO
ISO
ISO
1793
1795
1797-1
1797-2
ISO
ISO
1798
1802
ISO
ISO
ISO
ISO
1803
1804
1805
1806
ISO
ISO
ISO
1807
1809
1810
ISO
1811-1
ISO
ISO
1811-2
1812
ISO
1813
ISO
1815
ISO
ISO
ISO
ISO
ISO
1816
1817
1819
1823-1
1823-2
Cinematography - Printed 8 mm, Type S, Image Area on 16 mm Motion-Picture Film Perforated 8 mm, Type S (1-4) - Position and
Dimensions Second Edition
Cinematography - Camera Usage of 8 mm Type S Motion-Picture Film - Specifications Second Edition
Building Construction - Modular Coordination - Vocabulary Second Edition; PNS 637: 1988
Cinematography - Reels for 16 mm Motion-Picture Projectors (up to and Including 610 m Capacity: 38 cm Size) - Dimensions Second
Edition
Rubber, Raw Natural and Raw Synthetic - Sampling and Further Preparative Procedures Fourth Edition
Dental Rotary Instruments - Shanks - Part 1: Shanks Made of Metals First Edition; Amendment 1-1997
Dental Rotary Instruments - Shanks - Part 2: Shanks Made of Plastics First Edition; CAN/CSA-Z349.50.2-94
Flexible Cellular Polymeric Materials - Determination of Tensile Strength and Elongation at Break Third Edition; Corrigendum 1:
3/15/2003
Natural Rubber Latex Concentrate - Determination of Boric Acid Content Third Edition
Building Construction - Tolerances - Expression of Dimensional Accuracy - Principles and Terminology First Edition; Cancels and
Replaces ISO 4464: 1980
Doors - Terminology First Edition
Fishing nets Determination of breaking force and knot breaking force of netting yarns Second Edition
Fishing Nets - Determination of Mesh Breaking Load of Netting Second Edition
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Oscillating Conveyors and Shaking or Reciprocating Feeders
with Rectangular or Trapezoidal Trough First Edition
Textile Machinery and Accessories - Types of Formers for Yarn Packages - Nomenclature First Edition
Copper Alloys - Determination of Nickel (Low Contents) - Dimethylglyoxime Spectrophotometric Method First Edition
Copper and Copper Alloys - Selection and Preparation of Samples for Chemical Analysis - Part 1: Sampling of Cast Unwrought
Products First Edition
Copper and Copper Alloys - Selection and Preparation of Samples for Chemical Analysis - Part 2: Sampling of Wrought Products and
Castings First Edition
Copper Alloys - Determination of Iron Content - 1,10-Phenanthroline Spectrophotometric Method First Edition
Belt Drives - V-Ribbed Belts, Joined V-Belts and V-Belts Including Wide Section Belts and Hexagonal Belts - Electrical Conductivity of
Antistatic Belts: Characteristics and Methods of Test Third Edition; Corrected and Reprinted 04/15/1999
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Vibrating Feeders and Conveyors with Tubular Trough First
Edition
Continuous Mechanical Handling Equipment for Loose Bulk Materials and Unit Loads - Belt Conveyors - Basic Characteristics of
Motorized Driving Pulleys First Edition
Rubber, Vulcanized - Determination of the Effect of Liquids Fourth Edition; Corrected Version 2/15/2006
Continuous Mechanical Handling Equipment - Safety Code - General Rules First Edition
Rubber Hoses and Hose Assemblies - Part 1: On-Shore Oil Suction and Discharge - Specification First Edition
Rubber Hoses and Hose Assemblies - Part 2: Ship/Dockside Discharge - Specification First Edition
ISO
1825
ISO
ISO
ISO
ISO
ISO
ISO
1827
1829
1830
1831
1832 CORR 1
1832
ISO
ISO
1833-1
1833-2
ISO
1833-3
ISO
1833-4
ISO
1833-5
ISO
1833-6
ISO
1833-7
Rubber Hoses and Hose Assemblies for Aircraft Ground Fuelling and Defuelling - Specification Second Edition
Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods Third
Edition
Selection of Tolerance Zones for General Purposes First Edition
Paper, board and pulps Determination of acid-soluble manganese Second Edition
Printing Specifications for Optical Character Recognition First Edition
Indexable inserts for cutting tools ù Designation TECHNICAL CORRIGENDUM 1 Fourth Edition
Indexable inserts for cutting tools ù Designation Fourth Edition
Textiles Quantitative chemical analysis Part 1: General principles of testing First Edition;:1977; Together with ISO 1833-3 thru ISO
1833-19 replaces ISO 1833:1977
Textiles Quantitative chemical analysis Part 2: Ternary fibre mixtures First Edition;: 1976 [Replaced: ISO 5088]
Textiles Quantitative chemical analysis Part 3: Mixtures of acetate and certain other fibres (method using acetone) First Edition;
Together with ISO 1833-1: 2006, ISO 1833-4 thru ISO 1833-19: 2006 replaces ISO 1833: 1977
Textiles Quantitative chemical analysis Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) First
Edition; Together with ISO 1833-1: 2006, ISO 1833-3 thru ISO 1833-19: 2006 replaces ISO 1833: 1977
Textiles Quantitative chemical analysis Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)
First Edition; Together with ISO 1833-1: 2006, ISO 1833-3 thru ISO 1833-4: 2006, ISO 1833-6 thru ISO 1833-19: 2006 replaces ISO
1833: 1977
Textiles ù Quantitative chemical analysis ù Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres
(method using formic acid and zinc chloride) First Edition
Textiles Quantitative chemical analysis Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) First
Edition; Together with ISO 1833-1: 2006, ISO 1833-3 thru ISO 1833-6: 2006, ISO 1833-8 thru ISO 1833-19: 2006 replaces ISO 1833:
1977
ISO
1833-8
Textiles Quantitative chemical analysis Part 8: Mixtures of acetate and triacetate fibres (method using acetone) First Edition;
Together with ISO 1833-1: 2006, ISO 1833-3 thru ISO 1833-7: 2006, ISO 1833-9 thru ISO 1833-19: 2006 replaces ISO 1833: 1977
ISO
1833-9
ISO
1833-10
ISO
1833-11
Textiles Quantitative chemical analysis Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) First Edition;
Together with ISO 1833-1:2006, ISO 1833-3 thru ISO 1833-8:2006, ISO 1833-10 thru ISO 1833-19:2006 replaces ISO 1833:1977
Textiles Quantitative chemical analysis Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using
dichloromethane) First Edition; Together with ISO 1833-1 thru ISO 1833-9 and ISO 1833-11 thru ISO 1883-19 Supersedes ISO
1833:77
Textiles Quantitative chemical analysis Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) First Edition;
Together with ISO 1833-1 thru ISO 1833-10 and ISO 1833-12 thru ISO 1883-19 Supersedes ISO 1833:77
ISO
1833-12
ISO
1833-13
ISO
1833-14
Textiles Quantitative chemical analysis Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and
certain other fibres (method using dimethylformamide) First Edition; Together with ISO 1833-1 thru ISO 1833-11 and ISO 1833-13
thru ISO 1883-19 Supersedes ISO 1833:77
Textiles Quantitative chemical analysis Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon
disulfide/acetone) First Edition; Together with ISO 1833-1 thru ISO 1833-12 and ISO 1833-14 thru ISO 1883-19 Supersedes ISO
1833:77
Textiles Quantitative chemical analysis Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) First Edition;
Together with ISO 1833-1 thru ISO 1833-13 and ISO 1833-15 thru ISO 1883-19 Supersedes ISO 1833:77
ISO
1833-15
Textiles Quantitative chemical analysis Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content)
First Edition; Together with ISO 1833-1 thru ISO 1833-14 and ISO 1833-16 thru ISO 1883-19 Supersedes ISO 1833:77
ISO
1833-16
ISO
1833-17
ISO
1833-18
ISO
1833-19
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1833-21
1834
1835
1837
1838
1839
1840
1841-1
ISO
ISO
ISO
ISO
ISO
1841-2
1842
1853
1854
1856 AMD 1
Textiles Quantitative chemical analysis Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) First
Edition; Together with ISO 1833-1 thru ISO 1833-15 and ISO 1833-17 thru ISO 1883-19 Supersedes ISO 1833:77
Textiles Quantitative chemical analysis Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres
(method using sulfuric acid) First Edition; Together with ISO 1833-1 thru ISO 1833-16 and ISO 1833-18 thru ISO 1883-19
Supersedes ISO 1833:77
Textiles Quantitative chemical analysis Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) First Edition; Together
with ISO 1833-1: 2006, ISO 1833-3 thru ISO 1833-17: 2006 and ISO 1833-19: 2006 replaces ISO 1833: 1977
Textiles - Quantitative chemical analysis - Part 19: Mixtures of cellulose fibres and asbestos (method by heating) First Edition;
Together with ISO 1833-1: 2006, ISO 1833-3 thru ISO 1833-18: 2006 replaces ISO 1833: 1977
Textiles Quantitative chemical analysis Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates
and certain other fibres (method using cyclohexanone) First Edition
Short Link Chain for Lifting Purposes - General Conditions of Acceptance Second Edition
Short Link Chain for Lifting Purposes - Grade M (4), Non-Calibrated, for Chain Slings, Etc. First Edition
Lifting Hooks - Nomenclature Second Edition
Fresh Pineapples - Storage and Transport Second Edition
Tea - Sampling First Edition
Definitions of Living Animals for Slaughter - Porcines First Edition
Meat and Meat Products - Determination of Chloride Content - Part 1: Volhard Method First Edition; Replaces ISO 1841
Meat and Meat Products - Determination of Chloride Content - Part 2: Potentiometric Method First Edition; Replaces ISO 1841
Fruit and Vegetable Products - Determination of pH Second Edition
Conducting and Dissipative Rubbers, Vulcanized or Thermoplastic - Measurement of Resistivity Second Edition
Whey Cheese - Determination of Fat Content - Gravimetric Method (Reference Method) Third Edition
Flexible cellular polymeric materials ù Determination of compression set Third Edition
ISO
1856
ISO
1858
ISO
ISO
1859
1860
ISO
1861
ISO
1862
ISO
1863
ISO
1864
ISO
ISO
1865
1871
ISO
1872-1
ISO
1872-2
ISO
1873-1
ISO
1873-2
ISO
1874-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1874-2
1875
1887
1888
1889
1890
1891
1893
Flexible Cellular Polymeric Materials - Determination of Compression Set Third Edition
Information Processing - General Purpose Hubs and Reels, with 76 mm (3 in) Centrehole, for Magnetic Tape Used in Interchange
Instrumentation Applications First Edition
Information Processing - Unrecorded Magnetic Tapes for Interchange Instrumentation Applications - General Dimensional
Requirements First Edition
Information Processing - Precision Reels for Magnetic Tape Used in Interchange Instrumentation Applications Third Edition
Information Processing - 7-Track, 12,7 mm (0.5 in) Wide Magnetic Tape for Information Interchange Recorded at 8 rpmm (200 rpi)
First Edition
Information Processing - 9-Track, 12,7 mm (0.5 in) Wide Magnetic Tape for Information Interchange Recorded at 8 rpmm (200 rpi)
First Edition
Information Processing - 9-Track, 12,7 mm (0,5 in) Wide Magnetic Tape for Information Interchange Using NRZ1 at 32 ftpmm (800
ftpi) - 32 cpmm (800 cpi) Second Edition
Information Technology - Unrecorded 12,7 mm (0,5 in) Wide Magnetic Tape for Information Interchange - 32 ftpmm (800 ftpi), NRZ1,
126 ftpmm (3 200 ftpi) Phase Encoded and 356 ftpmm (9 042 ftpi), NRZ1 Fourth Edition; CEN EN 21864: 1993
Textile Machinery and Accessories - Serrated Bars for Mechanical Warp Stop Motions - Designations of Dimensions, and
Dimensions of Cross-Section First Edition
Agricultural Food Products - General Directions for the Determination of Nitrogen by the Kjeldahl Method First Edition
Plastics - Polyethylene (PE) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Second
Edition
Plastics ù Polyethylene (PE) moulding and extrusion materials ù Part 2: Preparation of test specimens and determination of
properties Third Edition
Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Fourth
Edition; CEN EN ISO 1873-1: 1995
Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of
Properties Third Edition
Plastics - Polyamide (PA) Moulding and Extrusion Materials - Part 1: Designation Second Edition; Corrected and Reprinted - 1992
Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
Third Edition
Plastics - Plasticized Cellulose Acetate - Determination of Matter Extractable by Diethyl Ether First Edition
Textile Glass - Determination of Combustible-Matter Content Third Edition
Textile glass Staple fibres or filaments Determination of average diameter Third Edition
Reinforcement Yarns - Determination of Linear Density Third Edition; Replaces ISO 10120: 1991
Reinforcement Yarns - Determination of Twist Third Edition
Bolts, Screws, Nuts and Accessories - Terminology and Nomenclature First Edition; Amendment Slip-1980
Refractory products ù Determination of refractoriness under load ù Differential method with rising temperature Third Edition
ISO
ISO
ISO
1919
1920
1920-1
ISO
ISO
1920-2
1920-3
ISO
ISO
ISO
ISO
ISO
1920-4
1920-5
1920-6
1920-7
1922
ISO
1923
ISO
ISO
ISO
ISO
ISO
1924-2
1924-3
1925
1926
1927
ISO
ISO
1928
1929
ISO
1940-1 CORR 1
ISO
ISO
1940-1
1940-2
ISO
1942-1
Road Vehicles - M14 X 1,25 Spark-Plugs with Flat Seating and Their Cylinder Head Housings Fifth Edition; Technical Corrigendum 1:
02-15-1999
Concrete Tests - Dimensions, Tolerances and Applicability of Test Specimens First Edition [Replaced By: ISO 1920-3]
Testing of concrete Part 1: Sampling of fresh concrete First Edition; Replaces ISO 2736-1:1986
Testing of concrete Part 2: Properties of fresh concrete First Edition; Replaces ISO 4109:1980, ISO 4110:1979, ISO 4111:1979, ISO
4848:1980, ISO 6276:1982
Testing of concrete Part 3: Making and curing test specimens First Edition; [Replaced: ISO 1920, ISO 2736-2]
Testing of concrete - Part 4: Strength of hardened concrete First Edition; Replaces ISO 4012:1978, ISO 4013:1978 and ISO
4108:1980
Testing of concrete Part 5: Properties of hardened concrete other than strength First Edition; Replaces ISO 6275:1982
Testing of concrete Part 6: Sampling, preparing and testing of concrete cores First Edition
Testing of concrete Part 7: Non-destructive tests on hardened concrete First Edition
Rigid Cellular Plastics - Determination of Shear Strength Third Edition
Cellular Plastics and Rubbers - Determination of Linear Dimensions Second Edition; CEN PREN 21923: 1994; CEN EN ISO 1923:
1995
Paper and Board - Determination of Tensile Properties - Part 2: Constant Rate of Elongation Method Second Edition; CEN EN ISO
1924-2: 1995
Paper and board Determination of tensile properties Part 3: Constant rate of elongation method (100 mm/min) First Edition
Mechanical Vibration - Balancing - Vocabulary Vibrations Mecaniques - Equilibrage - Vocabulaire Fourth Edition
Rigid cellular plastics Determination of tensile properties Third Edition
Prepared Unshaped Refractory Materials (Dense and Insulating) - Classification Second Edition
Solid Mineral Fuels - Determination of Gross Calorific Value by the Bomb Calorimetric Method, and Calculation of Net Calorific Value
Second Edition
Abrasive Belts - Dimensions, Tolerances and Designation Second Edition
Mechanical vibration ù Balance quality requirements for rotors in a constant (rigid) state ù Part 1: Specification and verification of
balance tolerances TECHNICAL CORRIGENDUM 1 Second Edition
Mechanical vibration ù Balance quality requirements for rotors in a constant (rigid) state ù Part 1: Specification and verification of
balance tolerances Second Edition
Mechanical Vibration - Balance Quality Requirements of Rigid Rotors - Part 2: Balance Errors First Edition
Dental Vocabulary - Part 1: General and Clinical Terms Second Edition; Amendment 1-1992; Amendment 2-1992; Amendment 31993; Amendment 5-1993; PNS 1248-1: 1994
ISO
ISO
1942-2
1942-3
Dental Vocabulary - Part 2: Dental Materials Second Edition; Amendment 1-2: 1992; CEN EN 21942-2: 1992; PNS 1248-2: 1994
Dental Vocabulary - Part 3: Dental Instruments Second Edition; Amendment 1-2: 1992; PNS 1248-3: 1994
ISO
1942-4
Dental Vocabulary - Part 4: Dental Equipment Second Edition; Amendment 1-1992; CEN EN 21942-4: 1993; PNS 1248-4: 1994
ISO
1942-5
ISO
ISO
ISO
ISO
1948
1949
1950
1951
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1952
1953
1954
1955
1956-1
1956-2
1957
1964
1965
1966
1967
1968
1969
1971
ISO
ISO
1973
1974
ISO
ISO
ISO
1975
1976
1977
Dental Vocabulary - Part 5: Terms Associated with Testing Second Edition; CEN EN ISO 1942-5: 1994; PNS 1248-5: 1994
Photography - Front Lens Barrels up to 127 mm - Dimensions Important to the Connection of Auxiliaries Second Edition; ANSI
PH3.104-1992
Aircraft - Electrical Connectors - Design Requirements Second Edition
Aircraft - Identification of Servicing, Maintenance, Ground Handling and Safety/Hazard Points First Edition
Presentation/representation of entries in dictionaries ù Requirements, recommendations and information Third Edition
Brown Coals and Lignites - Method of Extraction for the Determination of Sodium and Potassium Soluble in Dilute Hydrochloric Acid
First Edition
Hard Coal - Size Analysis by Sieving Second Edition
1999 Plywood - Tolerances on Dimensions First Edition
Citrus Fruits and Derived Products - Determination of Essential Oils Content (Reference Method) First Edition
Fruits and Vegetables - Morphological and Structural Terminology - Part 1 First Edition
Fruits and Vegetables - Morphological and Structural Terminology - Part 2 First Edition
Machine-Made Textile Floor Coverings - Selection and Cutting of Specimens for Physical Tests Third Edition
Shipbuilding - Indication of Details on the General Arrangement Plans of Ships Second Edition
Aluminium Terminal Ends for Crimping to Aircraft Aluminium Electrical Cables First Edition
Crimped Joints for Aircraft Electrical Cables First Edition
Aircraft - Fire-Resisting Electrical Cables - Dimensions, Conductor Resistance and Mass First Edition
Fibre ropes and cordage Vocabulary Cordages en fibres et articles de corderie Vocabulaire Fourth Edition
Fibre ropes Polyethylene 3- and 4-strand ropes Third Edition
Aircraft - Accessory Drives and Mounting Pads First Edition
Textile Fibres - Determination of Linear Density - Gravimetric Method and Vibroscope Method Second Edition; CEN EN ISO 1973:
1995
Paper - Determination of Tearing Resistance (Elmendorf Method) Third Edition; CEN EN 21974: 1994; PNS 316: 1989)
Magnesium and Magnesium Alloys - Determination of Silicon - Spectrophotometric Method with the Reduced Silicomolybdic Complex
First Edition
Zinc Alloys - Determination of Copper Content - Electrolytic Method First Edition
Conveyor chains, attachments and sprockets Second Edition
ISO
1984-1
Test Conditions for Manually Controlled Milling Machines with Table of Fixed Height - Testing of the Accuracy - Part 1: Machines with
Horizontal Spindle First Edition; Together with ISO 1984-2:2001, Cancels and Replaces ISO 1984:1982 and ISO 1984-0:1984
ISO
1984-2
ISO
1985
Test Conditions for Manually Controlled Milling Machines with Table of Fixed Height - Testing of the Accuracy - Part 2: Machines with
Vertical Spindle First Edition; Together with ISO 1984-1:2001, Cancels and Replaces ISO 1984:1982 and ISO 1984-0:1984
Machine Tools - Test Conditions for Surface Grinding Machines with Vertical Grinding Wheel Spindle and Reciprocating Table Testing of the Accuracy Third Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
1986-1
1988
1989 CORR 2
1989 CORR 1
1989
1990-1
1990-2
1991-1
1991-2
1992-2
1992-3
1992-8
1995
ISO
1996-1
ISO
ISO
1996-2
1997
ISO
1998-1
ISO
1998-2
ISO
ISO
1998-3
1998-4
ISO
1998-5
ISO
1998-6
ISO
1998-7
ISO
1998-99
ISO
1999
Test Conditions for Surface Grinding Machines with Horizontal Grinding Wheel Spindle and Reciprocating Table - Testing of
Accuracy - Part 1: Machines with a Table Length of up to 1 600 mm First Edition; Replaces ISO 1986
Hard Coal - Sampling First Edition; Amendment-1975
Information technology ù Programming languages ù COBOL TECHNICAL CORRIGENDUM 2 First Edition
Information technology Programming languages COBOL TECHNICAL CORRIGENDUM 1 First Edition
Information technology Programming languages COBOL First Edition
Fruits - Nomenclature - First List First Edition; PNS 1147-1: 1993
Fruits - Nomenclature - Second List First Edition; PNS 1146: 1993
Vegetables - Nomenclature - First List First Edition; PNS 1145: 1993
Vegetables - Nomenclature - Part 2: Second List Second Edition
Commercial Refrigerated Cabinets - Methods of Test - Part 2: General Test Conditions First Edition; Amendment 1-1979
Commercial Refrigerated Cabinets - Methods of Test - Part 3: Temperature Test First Edition; Amendment 1-1980
Commercial Refrigerated Cabinets - Test Methods - Part VIII: Test for Accidental Mechanical Contact First Edition
Aromatic Hydrocarbons - Sampling First Edition
Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures
Second Edition
Acoustics ù Description, measurement and assessment of environmental noise ù Part 2: Determination of environmental noise levels
Second Edition [Replaced: ISO 1996-1, ISO 1996-1, ISO 1996-3]
Granulated Cork and Cork Powder - Classification, Properties and Packing Second Edition
Petroleum Industry - Terminology - Part 1: Raw Materials and Products Industrie Petroliere - Terminologie - Parte 1: Matieres
Premieres Et Produits Second Edition; Corrigendum 1 07/15/1999
Petroleum Industry - Terminology - Part 2: Properties and Tests Industrie Petroliere - Terminologie - Partie 2: Proprietes Et Essais
Second Edition
Petroleum Industry - Terminology - Part 3: Exploration and Production Industrie Petroliere - Terminologie - Partie 3: Exploration Et
Production First Edition
Petroleum Industry - Terminology - Part 4: Refining Industrie Petroliere - Terminologie - Partie 4: Raffinage First Edition
Petroleum Industry - Terminology - Part 5: Transport, Storage, Distribution Industrie Petroliere - Terminologie - Parte 5: Transport,
Stockage, Distribution First Edition; Corrigendum 1 07/15/1999
Petroleum Industry - Terminology - Part 6: Measurement Industrie Petroliere - Terminologie - Partie 6: Mesurage First Edition
Petroleum Industry - Terminology - Part 7: Miscellaneous Terms Industrie Petroliere - Terminologie - Partie 7: Termes Divers First
Edition
Petroleum Industry - Terminology - Part 99: General and Index Industrie Petroliere - Terminologie - Partie 99: Generalites Et Index
First Edition
Acoustics - Determination of Occupational Noise Exposure and Estimation of Noise-Induced Hearing Impairment Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2000
2004
2005
2006
2007
2009
2010
2012
2016
ISO
2017-1
ISO
2020-1
ISO
2020-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2022
2023
2026
2027
2028
2030
2031
2032
2033
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2035
2036
2037
2039-1
2039-2
2040
2041
2042
ISO
2044
Rubber, raw natural Guidelines for the specification of technically specified rubber (TSR) Sixth Edition
Natural Rubber Latex Concentrate - Centrifuged or Creamed, Ammonia-Preserved Types - Specification Fourth Edition
Rubber Latex, Natural, Concentrate - Determination of Sludge Content Third Edition; Amendment 1: 02/01/2006
Rubber Latex, Synthetic - Determination of High-Speed Mechanical Stability Second Edition
Rubber, Unvulcanized - Determination of Plasticity - Rapid-Plastimeter Method Fourth Edition
Slotted Countersunk Flat Head Screws (Common Head Style) - Product Grade A Third Edition; CEN EN ISO 2009: 1994
Countersunk Slotted Raised Head Screws (Common Head Style) - Product Grade A Third Edition; CEN EN ISO 2010: 1994
Textile Machinery and Accessories - Cone Sectional Warping Machines - Maximum Usable Width First Edition
Capillary Solder Fittings for Copper Tubes - Assembly Dimensions and Tests First Edition
Mechanical vibration and shock Resilient mounting systems Part 1: Technical information to be exchanged for the application of
isolation systems First Edition; Together with ISO 2017-2 Replaces ISO 2017: 1982
Aerospace - Preformed Flexible Steel Wire Rope for Aircraft Controls - Part 1: Dimensions and Loads First Edition; Together with ISO
2020-2, It Cancels and Replaces ISO 2020: 1984; Reprinted 12/01/1997
Aerospace - Preformed Flexible Steel Wire Rope for Aircraft Controls - Part 2: Technical Specification First Edition; Together with ISO
2020-1, It Cancels and Replaces ISO 2020: 1984; Reprinted 12/01/1997
Information Technology - Character Code Structure and Extension Techniques Fourth Edition; Technical Corrigendum 1: 04/15/1999
Rubber Footwear - Lined Industrial Vulcanized-Rubber Boots - Specification Second Edition: Corrigendum 1: 12/15/2002
Aircraft - Connections for Starting Engines by Air First Edition
Natural Rubber Latex Concentrate, Evaporated, Preserved - Specification Third Edition
Synthetic Rubber Latex - Preparation of Dry Polymer Fourth Edition
Granulated Cork - Size Analysis by Mechanical Sieving Second Edition
Granulated Cork - Determination of Bulk Density Second Edition
Heat-Resisting Equipment Wires for Aircraft First Edition
Information Processing - Coding of Machine Readable Characters (MICR and OCR) Second Edition
Unplasticized Polyvinyl Chloride (PVC) Moulded Fittings for Elastic Sealing Ring Type Joints for Use under Pressure - PressureResistance Test First Edition
Wood for Manufacture of Wood Flooring - Symbols for Marking According to Species First Edition
Stainless Steel Tubes for the Food Industry Second Edition
Plastics - Determination of Hardness - Part 1: Ball Indentation Method Third Edition
Plastics - Determination of Hardness - Part 2: Rockwell Hardness Second Edition
Strontium Chromate Pigments for Paints First Edition
Vibration and Shock - Vocabulary Second Edition
Aircraft Electrical Circuit Diagrams First Edition
Unplasticized Polyvinyl Chloride (PVC) Injection-Moulded Solvent-Welded Socket Fittings for Use with Pressure Pipe - Hydraulic
Internal Pressure Test First Edition
ISO
ISO
ISO
2045
2046
2047
ISO
ISO
ISO
2048
2049
2057
ISO
ISO
2060
2061
ISO
ISO
2062
2063
ISO
ISO
ISO
ISO
2064
2066
2067
2068
ISO
ISO
2069
2070
ISO
2071
ISO
2072
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2073
2074
2076
2077
2078
2079
2080
2081
2082
Single Sockets for Unplasticized Poly(Vinyl Chloride) (PVC-U) and Chlorinated Poly(Vinyl Chloride) (PVC-C) Pressure Pipes with
Elastic Sealing Ring Type Joints - Minimum Depths of Engagement Second Edition
Gaseous Breathing Oxygen Supplies for Aircraft First Edition
Information Processing - Graphical Representations for the Control Characters of the 7-Bit Coded Character Set First Edition
Double-Socket Fittings for Unplasticized Poly(Vinyl Chloride) (PVC-U) Pressure Pipes with Elastic Sealing Ring Type Joints Minimum Depths of Engagement Second Edition
Petroleum Products - Determination of Colour (ASTM Scale) Second Edition
Agricultural Tractors - Remote Control Hydraulic Cylinders for Trailed Implements Second Edition
Textiles - Yarn from Packages - Determination of Linear Density (Mass per Unit Length) by the Skein Method Second Edition
Textiles - Determination of Twist in Yarns - Direct Counting Method Second Edition; CEN EN ISO 2061: 1995
Textiles - Yarns from Packages - Determination of Single-End Breaking Force and Elongation at Break Second Edition; Corrected
and Reprinted - 1995; CEN EN ISO 2062: 1995
Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys Third Edition
Metallic and Other Inorganic Coatings - Definitions and Conventions Concerning the Measurement of Thickness Third Edition; CEN
EN ISO 2064: 1994; PNS 670: 1990
Resilient floor coverings Determination of moisture content of agglomerated composition cork Third Edition
Granulated Cork - Sampling Third Edition
Barium Chromate Pigments for Paints First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Calcium Content - Flame Atomic Absorption
Method First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Calcium Content Second Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Zinc Content - Flame Atomic Absorption Method
First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Zinc Content - PAN Photometric Method First
Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Preparation of Solution for Analysis - Method by Hydrochloric Acid
Attack under Pressure First Edition
Plywood - Vocabulary First Edition
Textiles - Man-Made Fibres - Generic Names Fourth Edition
Pure Expanded Corkboard - Determination of the Modulus of Rupture by Bending First Edition;
Textile Glass - Yarns - Designation Fifth Edition; CEN EN ISO 2078: 1994
Surface Treatment and Metallic Coatings - General Classification of Terms Second Edition
Electroplating and Related Processes - Vocabulary Second Edition
Metallic Coatings - Electroplated Coatings of Zinc on Iron or Steel Second Edition
Metallic Coatings - Electroplated Coatings of Cadmium on Iron or Steel Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
2085
2093
2094
2096
2100
2103
ISO
ISO
2106
2107
ISO
ISO
ISO
2107
2108
2109
ISO
ISO
2110
2113
ISO
2114
ISO
ISO
ISO
2115
2120
2121
ISO
2122
ISO
ISO
ISO
ISO
2128
2131
2132
2133
ISO
ISO
2135
2137
ISO
2139
Anodizing of Aluminium and Its Alloys - Check of Continuity of Thin Anodic Oxide Coatings - Copper Sulphate Test First Edition
Electroplated Coatings of Tin - Specification and Test Methods Second Edition
Textile Floor Coverings - Determination of Thickness Loss under Dynamic Loading Third Edition
Glycerols for Industrial Use - Methods of Sampling First Edition
Aircraft - Electrical Connectors - Tests Second Edition
Loads Due to Use and Occupancy in Residential and Public Buildings First Edition; PNS 1089: 1991
Anodizing of Aluminium and Its Alloys - Determination of Mass per Unit Area (Surface Density) of Anodic Oxide Coatings Gravimetric Method Second Edition; Amendment 1-1983
Aluminium and aluminium alloys ù Wrought products ù Temper designations Third Edition
Aluminium and aluminium alloys ù Wrought products ù Temper designations Aluminium et alliages d'aluminium ù Produits corroyÚs ù
DÚsignation des Útats mÚtallurgiques Third Edition
Information and documentation - International Standard Book Number (ISBN) Fourth edition
Continuous Mechanical Handling Equipment - Light Duty Belt Conveyors for Loose Bulk Materials First Edition
Information Technology - Data Communication - 25-Pole DTE/DCE Interface Connector and Contact Number Assignments
Amendment 1: Interface Connector and Contact Assignments for DTE/DCE Interface for Data Signalling Rates Above 20 000 Bit/s
Third Edition; Amendment 1-1991
Reinforcement fibres - Woven fabrics - Basis for a specification Second Edition; Corrigendum 1: 2/15/2003
Plastics - (Polyester Resins) and Paints and Varnishes (Binders) - Determination of Partial Acid Value and Total Acid Value Third
Edition; Replaces ISO 3682
Plastics - Polymer Dispersions - Determination of White Point Temperature and Minimum Film-Forming Temperature Third Edition
Liquid Chlorine for Industrial Use - Determination of the Content of Chlorine by Volume in the Vaporized Product First Edition
Liquid Chlorine for Industrial Use - Determination of Water Content - Gravimetric Method First Edition
Sodium and Potassium Silicates for Industrial Use - Preparation of Solution of Products Not Easily Soluble in Boiling Water and
Determination of Matter Insoluble in Water First Edition
Anodizing of Aluminium and Its Alloys - Determination of Thickness of Anodic Oxide Coatings - Non-Destructive Measurement by
Split-Beam Microscope First Edition
Surface Active Agents - Simplified Classification First Edition
Offset Duplicators Attachment Features of Plates First Edition; Amendment 1-1975
Stencils for Duplicators - Minimum Overprint and Attachment Features Second Edition
Anodizing of Aluminium and Its Alloys - Accelerated Test of Light Fastness of Coloured Anodic Oxide Coatings Using Artificial Light
Second Edition
Petroleum Products - Lubricating Grease and Petrolatum - Determination of Cone Penetration Second Edition
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Oscillating Conveyors and Shaking or Reciprocating Feeders
with Tubular Trough First Edition
ISO
2140
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Apron Conveyors First Edition
ISO
2142
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2143
2144
2145
2148
2151
2155
2156
2157
2160
2162-1
ISO
2162-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2162-3
2164
2165
2166
2167
2168
2169
2171
2172
2173
2174
Wrought Aluminium, Magnesium and Their Alloys - Selection of Specimens and Test Pieces for Mechanical Testing First Edition
Anodizing of Aluminium and Its Alloys - Estimation of Loss of Absorptive Power of Anodic Oxide Coatings After Sealing - Dye Spot
Test with Prior Acid Treatment First Edition
Paper, Board and Pulps - Determination of Residue (Ash) on Ignition at 900 Degrees C Fourth Edition
Documentation - Numbering of Divisions and Subdivisions in Written Documents Second Edition
Continuous Handling Equipment - Nomenclature First Edition
Acoustics Noise test code for compressors and vacuum pumps Engineering method (Grade 2) First Edition
Aircraft - Fire-Resisting Electrical Cables - Performance Requirements First Edition
Aircraft - Fire-Resisting Electrical Cables - Methods of Test First Edition
Dental Rotary Instruments - Nominal Diameters and Designation Code Number Third Edition; CAN/CSA-Z349.49-94
Petroleum Products - Corrosiveness to Copper - Copper Strip Test Third Edition
Technical Product Documentation - Springs - Part 1: Simplified Representation First Edition; CEN EN 2162-1: 1996
Technical Product Documentation - Springs - Part 2: Presentation of Data for Cylindrical Helical Compression Springs First Edition;
CEN EN ISO 2162-2: 1996
Technical Product Documentation - Springs - Part 3: Vocabulary First Edition; Corrected and Reprinted - 1996; CEN EN ISO 2162-3:
1996
Pulses - Determination of Glycosidic Hydrocyanic Acid First Edition; Erratum-1981
Ware Potatoes - Guide to Storage First Edition
Carrots - Guide to Storage Second Edition
Round-Headed Cabbage - Guide to Cold Storage and Refrigerated Transport Second Edition
Table Grapes - Guide to Cold Storage First Edition
Fruits and Vegetables - Physical Conditions in Cold Stores - Definitions and Measurement Second Edition
Cereals and Milled Cereal Products - Determination of Total Ash Third Edition
Fruit Juice - Determination of Soluble Solids Content - Pyknometric Method First Edition
Fruit and Vegetable Products - Determination of Soluble Solids Content - Refractometric Method Second Edition
Surface Active Agents - Preparation of Water with Known Calcium Hardness Third Edition
ISO
ISO
2176
2177
ISO
ISO
2178
2179
ISO
2186
Petroleum Products - Lubricating Grease - Determination of Dropping Point Second Edition; Technical Corrigendum 1:06-15-2001
Metallic Coatings - Measurement of Coating Thickness - Coulometric Method by Anodic Dissolution Third Edition
Non-Magnetic Coatings on Magnetic Substrates - Measurement of Coating Thickness - Magnetic Method Second Edition; CEN EN
ISO 2178: 1995; PNS 678: 1990
Electroplated Coatings of Tin-Nickel Alloy - Specification and Test Methods Second Edition
Fluid flow in closed conduits ù Connections for pressure signal transmissions between primary and secondary elements Second
Edition
ISO
ISO
ISO
ISO
2187
2189
2190
2191
ISO
ISO
2194
2197
ISO
ISO
ISO
2199
2203
2205
Spinning Preparatory Machinery, Spinning and Doubling (Twisting) Machinery - List of Equivalent Terms Second Edition
Expanded Pure Agglomerated Cork - Determination of Bulk Density Second Edition
Granulated Cork - Determination of Moisture Content Third Edition
Cork - Expanded Pure Agglomerated - Deformation under Constant Pressure First Edition
Industrial Screens - Woven Wire Cloth, Perforated Plate and Electroformed Sheet - Designation and Nominal Sizes of Openings
Second Edition
Sodium Hydrogen Carbonate for Industrial Use - List of Methods of Test and Preparation of the Test Sample First Edition
Sodium Hydrogen Carbonate for Industrial Use - Determination of Sodium Hydrogen Carbonate Content - Titrimetric Method First
Edition
Technical Drawings - Conventional Representation of Gears First Edition
Textile Machinery and Accessories - Drafting Arrangements for Spinning Machines - Terminology First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2206
2207
2209
2211
2219
2227
2230
Packaging - Complete, Filled Transport Packages - Identification of Parts When Testing Second Edition; CEN EN 22206: 1992
Petroleum Waxes - Determination of Congealing Point First Edition
Liquid Halogenated Hydrocarbons for Industrial Use - Sampling First Edition
Liquid Chemical Products - Measurement of Colour in Hazen Units (Platinum-Cobalt Scale) First Edition
Expanded Pure Agglomerated Cork for Thermal Insulation - Characteristics, Sampling and Packaging Second Edition
Formaldehyde Solutions for Industrial Use - Determination of Formaldehyde Content First Edition
Rubber Products - Guidelines for Storage Second Edition
ISO
2231
ISO
ISO
ISO
2232
2233
2234
Rubber- or Plastics-Coated Fabrics - Standard Atmospheres for Conditioning and Testing Second Edition; CEN EN ISO 2231: 1995
Round Drawn Wire for General Purpose Non-Alloy Steel Wire Ropes and for Large Diameter Steel Wire Ropes - Specifications
Second Edition
Packaging - Complete, Filled Transport Packages and Unit Loads - Conditioning for Testing Fourth Edition
Packaging - Complete, Filled Transport Packages and Unit Loads - Stacking Tests Using a Static Load Third Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2236
2238
2240
2244
2245
2247
2248
2250
2253
2254
Assembly Tools for Screws and Nuts - Forged and Tubular Socket Wrenches - Maximum Outside Head Dimensions Third Edition
Machine Bridge Reamers First Edition
Photography Colour reversal camera films Determination of ISO speed Fourth Edition
Packaging - Complete, Filled Transport Packages and Unit Loads - Horizontal Impact Tests Third Edition
Shaped insulating refractory products Classification Third Edition
Packaging - Complete, Filled Transport Packages and Unit Loads - Vibration Tests at Fixed Low Frequency Third Edition
Packaging - Complete, Filled Transport Packages - Vertical Impact Test by Dropping Second Edition; CEN EN 22248: 1992
Finishing Reamers for Morse and Metric Tapers, with Parallel Shanks and Morse Taper Shanks First Edition
Curry Powder - Specification Third Edition
Cloves, whole and ground (powdered) Specification Second Edition
ISO
ISO
2255
2256
ISO
ISO
ISO
ISO
2257
2258
2261
2262
ISO
2267
ISO
2268
Coriander, (Coriandrum Sativum L.), Whole or Ground (Powdered) - Specification Second Edition
Dried Mint (Spearmint) (Mentha spicata Linnaeus Syn. Mentha viridis Linnaeus) - Specification First Edition
Office Machines and Printing Machines Used for Information Processing - Widths of Fabric Printing Ribbons on Spools Second
Edition; Corrected and Reprinted - 1981
Printing Ribbons - Minimum Markings to Appear on Containers Second Edition
Reciprocating Internal Combustion Engines - Hand-Operated Control Devices - Standard Direction of Motion Second Edition
General Purpose Thimbles for Use with Steel Wire Ropes - Specification Second Edition
Surface Active Agents - Evaluation of Certain Effects of Laundering - Methods of Preparation and Use of Unsoiled Cotton Control
Cloth Third Edition
Surface Active Agents (Non-Ionic) - Determination of Polyethylene Glycols and Non-Ionic Active Matter (Adducts) - Weibull Method
First Edition
ISO
2269
Shipbuilding - Class A Magnetic Compasses, Azimuth Reading Devices and Binnacles - Tests and Certification Second Edition
ISO
2270
ISO
2271
ISO
ISO
ISO
ISO
ISO
2272
2277
2281
2283
2284
ISO
2285
ISO
2286-1
ISO
2286-2
ISO
ISO
ISO
ISO
ISO
ISO
2286-3
2291
2292
2294
2295
2296
Non-Ionic Surface Active Agents - Polyethoxylated Derivatives - Iodometric Determination of Oxyethylene Groups Second Edition
Surface Active Agents - Detergents - Determination of Anionic-Active Matter by Manual or Mechanical Direct Two-Phase Titration
Procedure Second Edition
Surface Active Agents - Soaps - Determination of Low Contents of Free Glycerol by Molecular Absorption Spectrometry Second
Edition
Static Invertors for Aircraft First Edition; Erratum-1973
Horology - Water-Resistant Watches Third Edition
Long Shank Machine Taps with Nominal Diameters from M3 to M24 and 1/8 to 1 in - Reduced Shank Taps Second Edition
Hand Taps for Parallel and Taper Pipe Threads - General Dimensions and Marking Third Edition
Rubber, vulcanized or thermoplastic ù Determination of tension set under constant elongation, and of tension set, elongation and
creep under constant tensile load Sixth Edition
Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 1: Methods for Determination of Length, Width and
Net Mass First Edition
Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 2: Methods for Determination of Total Mass per Unit
Area, Mass per Unit Area of Coating and Mass per Unit Area of Substrate First Edition
Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 3: Methods for Determination of Thickness First
Edition
Cocoa Beans - Determination of Moisture Content (Routine Method) Second Edition
Cocoa Beans - Sampling First Edition
Meat and Meat Products - Determination of Total Phosphorus Content (Reference Method) First Edition
Avocados - Guide for Storage and Transport First Edition
Metal Slitting Saws with Fine and Coarse Teeth - Metric Series First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2297
2299
2300
2301
2302
2303
2306
2307
2308
2309
ISO
ISO
2313
2314
ISO
2315
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2320
2321
2322
2325
2326
2327
2328
2330
2331
ISO
ISO
2332
2336-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2336-2
2338
2339
2340
2341
2342
2344
Chemical Analysis of Aluminium and Its Alloys - Complexometric Determination of Magnesium First Edition
Sawn Timber of Broadleaved Species - Defects - Classification First Edition
Sawn Timber of Broadleaved Species - Defects - Terms and Definitions First Edition
Sawn Timber of Broadleaved Species - Defects - Measurement First Edition
Isobutene-isoprene rubber (IIR) Evaluation procedures Fifth Edition
Isoprene Rubber (IR) - Non-Oil-Extended, Solution-Polymerized Types - Evaluation Procedure Fourth Edition
Drills for Use Prior to Tapping Screw Threads First Edition
Fibre ropes Determination of certain physical and mechanical properties Third edition
Hooks for Lifting Freight Containers of up to 30 Tonnes Capacity - Basic Requirements First Edition
Coke - Sampling Second Edition
Textile Fabrics - Determination of the Recovery from Creasing of a Horizontally Folded Specimen by Measuring the Angle of
Recovery First Edition
Gas Turbines - Acceptance Tests Second Edition; Corrigendum 1-1997; Amendment 1-1997
Aircraft - Two- and Four-Pole Sealed Electromagnetic Relays, 2 A and 3 A - Clearance and Fixing Dimensions Second Edition
Prevailing Torque Type Steel Hexagon Nuts - Mechanical and Performance Properties Third Edition; Technical Corrigendum 1:
09/01/2006
Rubber threads Methods of test Third Edition
Styrene-Butadiene Rubber (SBR) - Emulsion- and Solution-Polymerized Types - Evaluation Procedures Fourth Edition
Coke - Size Analysis (Nominal Top Size 20 mm or Less) Third Edition
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Aeroslides First Edition
Pneumatic Handling Appliances for Loose Bulk Materials - Piping First Edition
Fork-Lift Trucks - Hook-On Type Fork Arms and Fork Arm Carriages - Mounting Dimensions Third Edition
Fork-Lift Trucks - Fork Arms - Technical Characteristics and Testing Third Edition
Fork Lift Trucks - Hook-On Type Fork Arms - Vocabulary First Edition
Agricultural Tractors and Machinery - Connection of Implements Via Three-Point Linkage - Clearance Zone Around Implement
Second Edition
Hacksaw Blades - Part 1: Dimensions for Hand Blades First Edition; Replaces ISO 2336
Hacksaw blades Part 2: Dimensions for machine blades Lames de scies droites Ó mÚtaux Partie 2: Dimensions des lames Ó
machine Second Edition
Parallel Pins, of Unhardened Steel and Austenitic Stainless Steel Second Edition
Taper Pins, Unhardened Second Edition
Clevis Pins without Head Second Edition
Clevis Pins with Head Second Edition
Slotted headless screws with shank Second Edition
Road Vehicles - M14 X 1,25 Spark-Plugs with Conical Seating and Their Cylinder Head Housings Seventh Edition
ISO
2345
ISO
ISO
2346
2347
ISO
2351-1
ISO
2351-2
ISO
2351-3
ISO
ISO
ISO
2353
2354
2355
ISO
2360
ISO
2361
ISO
ISO
ISO
ISO
ISO
2366
2367
2370
2374
2375
ISO
ISO
ISO
ISO
2376
2377
2378
2379
ISO
2380-1
ISO
ISO
ISO
2380-2
2382-1
2382-3
Road Vehicles - M18 X 1,5 Spark-Plugs with Conical Seating and Their Cylinder Head Housing Fifth Edition
Road Vehicles - M14 x 1,25 Compact Spark-Plugs with Flat Seating and 19mm Hexagon and Their Cylinder Head Housing Fifth
Edition
Road Vehicles - M14 X 1,25 Compact Spark-Plugs with Conical Seating and Their Cylinder Head Housing Fifth Edition
Assembly tools for screws and nuts ù Machine-operated screwdriver bits ù Part 1: Screwdriver bits for slotted head screws Second
Edition
Assembly Tools for Screws and Nuts - Machine-Operated Screwdriver Bits - Part 2: Screwdriver Bits for Cross-Recessed Head
Screws First Edition
Assembly Tools for Screws and Nuts - Machine-Operated Screwdriver Bits - Part 3: Screwdriver Bits for Hexagon Socket Screws
First Edition; Replaces ISO 3109
Magnesium and Its Alloys - Determination of Manganese in Magnesium Alloys Containing Zirconium, Rare Earths, Thorium and
Silver - Periodate Photometric Method First Edition
Magnesium Alloys - Determination of Insoluble Zirconium - Alizarin Sulphonate Photometric Method Second Edition
Chemical Analysis of Magnesium and Its Alloys - Determination of Rare Earths - Gravimetric Method First Edition
Non-conductive coatings on non-magnetic electrically conductive basis materials Measurement of coating thickness Amplitudesensitive eddy current method Third Edition
Electrodeposited Nickel Coatings on Magnetic and Non-Magnetic Substrates - Measurement of Coating Thickness - Magnetic
Method Second Edition; PNS 671: 1990
Cryolite, Natural and Artificial - Determination of Sodium Content - Flame Emission and Atomic Absorption Spectrophotometric
Methods First Edition
Cryolite (Natural and Artificial) - Determination of Aluminium Content - 8-Hydroxyquinoline Gravimetric Method First Edition
Textiles - Determination of Fineness of Flax Fibres - Permeametric Methods Second Edition
Lifting Appliances - Range of Maximum Capacities for Basic Models First Edition
Information Technology - Procedure for Registration of Escape Sequences and Coded Character Sets First Edition
Anodization (Anodic Oxidation) of Aluminium and Its Alloys - Insulation Check by Measurement of Breakdown Potential First Edition
Magnesium Alloy Sand Castings - Reference Test Bar First Edition
Aluminium Alloy Chill Castings - Reference Test Bar First Edition
Aluminium Alloy Sand Castings - Reference Test Bar First Edition
Assembly tools for screws and nuts Screwdrivers for slotted-head screws Part 1: Tips for hand- and machine-operated screwdrivers
Third Edition
Assembly tools for screws and nuts Screwdrivers for slotted-head screws Part 2: General requirements, lengths of blades and
marking of hand-operated screwdrivers Third Edition
Information Technology - Vocabulary - Part 1: Fundamental Terms Third Edition
Information Processing Systems - Vocabulary - Part 03: Equipment Technology Second Edition
ISO
2382-4
ISO
ISO
2382-5
2382-6
ISO
2382-7
ISO
ISO
ISO
ISO
ISO
ISO
2382-8
2382-9
2382-12
2382-13
2382-15
2382-16
ISO
2382-17
ISO
ISO
ISO
2382-18
2382-19
2382-20
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2382-21
2382-22
2382-23
2382-24
2382-25
2382-26
2382-27
2382-28
ISO
ISO
2382-29
2382-31
ISO
2382-32
ISO
2382-34
Information Technology - Vocabulary - Part 4: Organization of Data Technologies De L'Information - Vocabulaire - Partie 4:
Organisation Des Donnees First Edition
Information Technology - Vocabulary - Part 5: Representation of Data Technologies De L'Information - Vocabulaire - Partie 5:
Representation Des Donnees First Edition
Information Processing Systems - Vocabulary - Part 06: Preparation and Handling of Data Second Edition
Information Technology - Vocabulary - Part 07: Computer Programming Technologies De L'Information - Vocabulaire - Partie 7:
Programmation Des Ordinateurs Third Edition
Information Technology - Vocabulary - Part 8: Security Technologies DeL'Information - Vocabularie - Partie 8: Securite Second
Edition
Information Technology - Vocabulary - Part 9: Data Communication Second Edition
Information Processing Systems - Vocabulary - Part 12: Peripheral Equipment Second Edition
Information Technology - Vocabulary - Part 13: Computer Graphics Second Edition
Information Technology - Vocabulary - Part 15: Programming Languages First Edition
Information Technology - Vocabulary - Part 16: Information Theory Second Edition
Information Technology - Vocabulary - Part 17: Databases Technologies De I'Information - Vocabulaire - Partie 17: Bases De
Donnees Second Edition
Information Technology - Vocabulary - Part 18: Distributed Data Processing Technologies De L'Information - Vocabulaire - Partie 18:
Informatique Repartie First Edition
Information Processing Systems - Vocabulary - Part 19: Analog Computing Second Edition
Information Technology - Vocabulary - Part 20: System Development First Edition
Data Processing - Vocabulary - Part 21: Interfaces between Process Computer Systems and Technical Processes First Edition
Information Processing Systems - Vocabulary - Part 22: Calculators First Edition
Information Technology - Vocabulary - Part 23: Text Processing First Edition
Information Technology - Vocabulary - Part 24: Computer-Integrated Manufacturing First Edition
Information Technology - Vocabulary - Part 25: Local Area Networks First Edition
Information Technology - Vocabulary - Part 26: Open Systems Interconnection First Edition
Information Technology - Vocabulary - Part 27: Office Automation First Edition
Information Technology - Vocabulary - Part 28: Artificial Intelligence - Basic Concepts and Expert Systems First Edition
Information Technology - Vocabulary - Part 29: Artificial Intelligence - Speech Recognition and Synthesis Technologies De
L'Information - Vocabulaire - Partie 29: Intelligence Artificielle - Reconnaissance Et Synthese De La Parole First Edition
Information Technology - Vocabulary - Part 31: Artificial Intelligence - Machine Learning First Edition
Information technology Vocabulary Part 32: Electronic Mail Technologies de l'information Vocabulaire Partie 32: Courrier
Úlectronique First Edition
Information Technology - Vocabulary - Part 34: Artificial Intelligence - Neural Networks Technologies De L'Information - Vocabulaire Partie 34: Intelligence Artificielle - Reseaux Neuronaux First Edition
ISO
2382-2
ISO
2382-10
ISO
ISO
2382-14
2384
ISO
2385
ISO
ISO
ISO
ISO
ISO
ISO
2386
2393
2394
2395
2398
2400
Data Processing - Vocabulary - Section 02: Arithmetic and Logic Operations Traitement De L'Information - Vocabulaire - Chapitre 02:
Operations Arithmetiques Et Logiques First Edition
Data Processing - Vocabulary - Section 10: Operating Techniques and Facilities Traitement De L'Information - Vocabulaire - Chapitre
10: Techniques Et Moyens D'Exploitation First Edition
Information Technology - Vocabulary - Part 14: Reliability, Maintainability and Availability Technologies De L'Information - Vocabulaire
- Partie 14: Fiabilite, Maintenabilite Et Disponibilite Second Edition
Documentation - Presentation of Translations First Edition
Corkwood in Planks, Virgin Cork, Cleanings, Cork Pieces, Corkwood Refuse and Corkwaste - Sampling to Determine Moisture
Content Second Edition
Corkwood in Planks, Virgin Cork, Ramassage, Gleanings, Corkwood Refuse and Corkwaste - Determination of Moisture Content
Third Edition
Rubber Test Mixes - Preparation, Mixing and Vulcanization - Equipment and Procedures Second Edition
General Principles on Reliability for Structures Third Edition
Test Sieves and Test Sieving - Vocabulary Second Edition
Rubber hoses, textile-reinforced, for compressed air Specification Fifth Edition
Welds in Steel - Reference Block for the Calibration of Equipment for Ultrasonic Examination First Edition
ISO
ISO
ISO
2401
2402
2403
Covered Electrodes - Determination of the Efficiency, Metal Recovery and Deposition Coefficient First Edition; CEN EN 22401: 1994
Shell Reamers with Taper Bore (Taper Bore 1 : 30 (Included)) with Slot Drive and Arbors for Shell Reamers First Edition
Textiles - Cotton Fibres - Determination of Micronaire Value First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2404
2406
2407
2408
2409
2410
2411
2412
2415
2416
2417
Cinematography - Six-Track Magnetic Sound Records on 70 mm Striped Release Prints - Locations and Dimensions Second Edition
Continuous Mechanical Handling Equipment - Mobile and Portable Conveyors - Constructional Specifications First Edition
Tests Conditions for Internal Cylindrical Grinding Machines with Horizontal Spindle - Testing of Accuracy Third Edition
Steel wire ropes for general purposes Minimum requirements Third Edition
Paints and Varnishes - Cross-Cut Test Third Edition
Household Refrigerators - Methods of Test for the Information of the Consumer First Edition
Rubber- or Plastics-Coated Fabrics - Determination of Coating Adhesion Third Edition
Shipbuilding - Colours of Indicator Lights Second Edition
Forged shackles for general lifting purposes Dee shackles and bow shackles Third Edition
Passenger Cars - Mass Distribution Third Edition
Leather Physical and mechanical tests Determination of the static absorption of water Second Edition; IULTCS/IUP 7
ISO
ISO
ISO
2418
2419
2420
Leather Chemical, physical and mechanical and fastness tests Sampling location Second Edition; IULTCS/IUP 2 and IUC 2
Leather Physical and mechanical tests Sample preparation and conditioning Third Edition; IULTCS/IUP 1 and IUP 3
Leather Physical and mechanical tests Determination of apparent density Second Edition; IULTCS/IUP 5
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2421
2423
2424
2425
2426-1
2426-2
2426-3
ISO
2431
ISO
ISO
ISO
ISO
2433
2434
2435
2436
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2439
2440
2444
2445
2446
2447
2448
ISO
ISO
ISO
2449
2450
2451
ISO
ISO
ISO
ISO
2453
2454
2456
2457
Coated Abrasives - Cylindrical Sleeves Second Edition
Acceptance Conditions for Radial Drilling Machines with the Arm Adjustable in Height - Testing of Accuracy Second Edition
Textile floor coverings ù Vocabulary RevÛtements de sol textiles ù Vocabulaire Fourth Edition
Measurement of Liquid Flow in Open Channels Under Tidal Conditions Second Edition; AMENDMENT 1: 12/01/2003
Plywood - Classification by Surface Appearance - Part 1: General First Edition; Supersedes ISO 2426: 1974
Plywood - Classification by Surface Appearance - Part 2: Hardwood First Edition
Plywood - Classification by Surface Appearance - Part 3: Softwood First Edition; Supersedes ISO 2426: 1974
Paints and Varnishes - Determination of Flow Time by Use of Flow Cups Fourth Edition; Technical Corrigendum 1: 06-15-1994;
Technical Corrigendum 2: 04-01-1999
Machine Tools - Test Conditions for External Cylindrical and Universal Grinding Machines with a Movable Table - Testing of the
Accuracy Third Edition
Compressed Non-Breathing Air for Use in Aircraft First Edition
Nitrogen for Use in Aircraft First Edition
Heat-Resisting Equipment Wires for Aircraft - Methods of Test First Edition
Flexible Cellular Polymeric Materials - Determination of Hardness (Indentation Technique) Third Edition; Technical Corrigendum 11998
Flexible and Rigid Cellular Polymeric Materials - Accelerated Ageing Tests Third Edition
Joints in Building - Vocabulary Second Edition
Joints in Building - Fundamental Principles for Design First Edition
Milk - Determination of Fat Content (Routine Method) First Edition
Fruit and Vegetable Products - Determination of Tin Content Second Edition
Fruit and Vegetable Products - Determination of Ethanol Content Second Edition
Milk and Liquid Milk Products - Density Hydrometers for Use in Products with a Surface Tension of Approximately 45 mN/m First
Edition
Cream - Determination of Fat Content - Gravimetric Method (Reference Method) Third Edition
Cocoa Beans - Specification First Edition
Rubber, Raw Styrene-Butadiene, Emulsion-Polymerized - Determination of Bound Styrene Content - Refractive Index Method
Second Edition; Corrigendum 1:08/15/2003
Rubber Products - Determination of Zinc Content - EDTA Titrimetric Method Third Edition
Surface Active Agents - Water Used as a Solvent for Tests - Specification and Test Methods First Edition
Solid Wood Parquet - Classification of Beech Strips Second Edition
ISO
ISO
ISO
ISO
2460
2461
2462
2463
Sodium Hydrogen Carbonate for Industrial Use - Determination of Iron Content - 1,10-Penanthroline Photometric Method First Edition
Sodium Chlorate for Industrial Use - Determination of Matter Insoluble in Water First Edition
Sodium Chlorate for Industrial Use - Determination of Moisture Content - Gravimetric Method First Edition
Sodium Chlorate for Industrial Use - Determination of Chloride Content - Mercurimetric Method First Edition
ISO
2466
ISO
ISO
ISO
ISO
2467
2469
2470
2471
ISO
ISO
ISO
ISO
2475
2476
2477
2478
ISO
ISO
ISO
2479
2480
2481
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2482
2483
2490
2491
2492
2493
2495
ISO
2503
ISO
2504
Potassium Hydroxide for Industrial Use - Sampling - Test Sample - Preparation of the Main Solution for Carrying out Certain
Determinations First Edition
Cinematography Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image
area on 70 mm/5 perforation motion-picture prints Positions and dimensions Third Edition
Paper, board and pulps ù Measurement of diffuse radiance factor Fourth Edition
Paper, Board and Pulps - Measurement of Diffuse Blue Reflectance Factor (ISO Brightness) Third Editon
Paper and Board - Determination of Opacity (Paper Backing) - Diffuse Reflectance Method Third Edition
Chloroprene rubber (CR) - Generalpurpose types - Evaluation procedure Fourth Edition; Technical Corrigendum 1: 06/01/2001;
Amendment 1: 10/15/2005
Rubber, Butadiene (BR) - Solution-Polymerized Types - Evaluation Procedures Fourth Edition
Shaped insulating refractory products - Determination of permanent change in dimensions on heating Third Edition
Dense Shaped Refractory Products - Determination of Permanent Change in Dimensions on Heating Second Edition
Sodium Chloride for Industrial Use - Determination of Matter Insoluble in Water or in Acid and Preparation of Principal Solutions for
Other Determinations First Edition
Sodium Chloride for Industrial Use - Determination of Sulphate Content - Barium Sulphate Gravimetric Method First Edition
Sodium Chloride for Industrial Use - Determination of Halogens, Expressed as Chlorine - Mercurimetric Method First Edition
Sodium Chloride for Industrial Use - Determination of Calcium and Magnesium Contents - EDTA Complexometric Methods First
Edition
Sodium Chloride for Industrial Use - Determination of the Loss of Mass at 110 Degrees Celsius First Edition
Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module ù Nominal dimensions Third Edition
Thin Parallel Keys and Their Corresponding Keyways (Dimensions in Millimetres) First Edition
Thin Taper Keys with or without Gib Head and Their Corresponding Keyways (Dimensions in Millimetres) First Edition
Paper and Board - Determination of Resistance to Bending Second Edition
Iron Blue Pigments - Specifications and Methods of Test Second Edition
Gas Welding Equipment - Pressure Regulators for Gas Cylinders Used in Welding, Cutting and Allied Processes up to 300 bar Third
Edition
Radiography of Welds and Viewing Conditions for Films - Utilization of Recommended Patterns of Image Quality Indicators (I.Q.I.)
First Edition
ISO
2505
Thermoplastics pipes - Longitudinal reversion - Test method and parameters Second edition; Replaces ISO 2505-1 and 2505-2
ISO
2507-1
ISO
2507-2
Thermoplastics Pipes and Fittings - Vicat Softening Temperature - Part 1: General Test Method First Edition; Replaces ISO 2507
Thermoplastics Pipes and Fittings - Vicat Softening Temperature - Part 2: Test Conditions for Unplasticized Poly(Vinyl Chloride) (PVCU) or Chlorinated Poly(Vinyl Chloride) (PVC-C) Pipes and Fittings and for High Impact Resistance Poly(Vinyl Chloride) (PVC-HI)
Pipes First Edition; Replaces ISO 2507
ISO
ISO
ISO
ISO
ISO
ISO
2507-3
2509
2510
2528
2531
2532
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2533
2534
2535
2536
2537
2538
2540
2541
2543
2544
2549
2550
ISO
ISO
ISO
2551
2553
2554
ISO
2555
ISO
2556
ISO
ISO
2558
2559
ISO
2560
ISO
2561
Thermoplastics Pipes and Fittings - Vicat Softening Temperature - Part 3: Test Conditions for Acrylonitrile/ Butadiene/Styrene (ABS)
and Acrylonitrile/ Styrene/Acrylic Ester (ASA) Pipes and Fittings First Edition
Sound-Absorbing Expanded Pure Agglomerated Cork in Tiles Second Edition
Sound-Reducing Composition Cork in Tiles Second Edition
Sheet Materials - Determination of Water Vapour Transmission Rate - Gravimetric (Dish) Method Second Edition
Ductile Iron Pipes, Fittings, Accessories and Their Joints for Water or Gas Applications Fifth Edition
Steel Wire Ropes - Vocabulary First Edition
Standard Atmosphere (Identical with the ICAO and WMO Standard Atmospheres from - 2 to 32 km) Atmosphere Type (Identique Aux
Atmospheres Standard De L'OACI Et De L'OMM Entre - 2 Et 32 km) First Edition; Erratum-1977; Amendment 1-1985; Amendment 21997
Road Vehicles - Engine Test Code - Gross Power Second Edition; This Standard is Consistent with ISO 1585: 1992
Plastics - Unsaturated-Polyester Resins - Measurement of Gel Time at Ambient Temperature Third Edition
Unplasticized Polyvinyl Chloride (PVC) Pressure Pipes and Fittings, Metric Series - Dimensions of Flanges First Edition
Hydrometry ù Rotating-element currentmeters Fouth Edition
Geometrical Product Specifications (GPS) - Series of Angles and Slopes on Prisms Second Edition
Centre Drills for Centre Holes with Protecting Chamfer - Type B First Edition
Centre Drills for Centre Holes with Radius Form - Type R First Edition
Copper and Copper Alloys - Determination of Manganese - Spectrophotometric Method First Edition
Textile Machinery and Accessories - Warping Machinery - Preparation of Warp for Weaving - Vocabulary First Edition
Hand-Knotted Carpets - Determination of Tuft Leg Length Above the Woven Ground First Edition; Corrigendum 1-1990
Hand-Made Carpets - Determination of Types of Knots First Edition
Machine-Made Textile Floor Coverings - Determination of Dimensional Changes Due to the Effects of Varied Water and Heat
Conditions Second Edition
Welded, Brazed and Soldered Joints - Symbolic Representation on Drawings Third Edition; Includes Draft Addendum 1
Plastics - Unsaturated Polyester Resins - Determination of Hydroxyl Value Second Edition
Plastics - Resins in the Liquid State or as Emulsions or Dispersions - Determination of Apparent Viscosity by the Brookfield Test
Method Second Edition; Corrected and Reprinted- 1990
Plastics - Determination of the Gas Transmission Rate of Films and Thin Sheets Under Atmospheric Pressure - Manometric Method
First Edition
Textile Glass Chopped-Strand Mats for Reinforcement of Plastics - Determination of Time of Dissolution of the Binder in Styrene First
Edition
Textile Glass - Mats (Made from Chopped or Continuous Strands) - Designation and Basis for Specifications Fourth Edition
Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of Non-Alloy and Fine Grain Steels - Classification
Second Edition
Plastics Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas
chromatography Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2562
2563
2566-1
2566-2
2568
2569
2572
2574
2575 AMD 2
2575 AMD 1
2575
ISO
ISO
ISO
2576
2577
2578
ISO
2580-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2580-2
2582
2584
2585
2586
2587
2588
2589
2590
2591-1
2592
ISO
ISO
2593
2594
ISO
ISO
ISO
2596
2597-1
2598-1
Modular Units for Machine Tool Construction - Slide Units First Edition; Amendment 1-1982
Aircraft Ducting and Piping - Profile Dimensions for Flanges of V-Band Couplings First Edition
Steel - Conversion of Elongation Values - Part 1: Carbon and Low Alloy Steels Second Edition
Steel - Conversion of Elongation Values - Part 2: Austenitic Steels First Edition
Hand- and Machine-Operated Circular Screwing Dies and Hand-Operated Die Stocks Second Edition
Cork Stoppers - Vocabulary Third Edition
Textile Machinery and Accessories - Card Gauges Second Edition
Aircraft - Electrical Cables - Identification Marking Second Edition
Road vehicles ù Symbols for controls, indicators and tell-tales AMENDMENT 2 Seventh Edition
Road vehicles ù Symbols for controls, indicators and tell-tales AMENDMENT 1 Seventh Edition
Road vehicles ù Symbols for controls, indicators and tell-tales Seventh Edition
Chemical Analysis of Zinc Alloys - Polarographic Determination of Lead and Cadmium in Zinc Alloys Containing Copper First Edition
Plastics - Thermosetting Moulding Materials - Determination of Shrinkage Second Edition
Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat Second Edition
Plastics - Acrylonitrile-Butadiene-Styrene (ABS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for
Specifications Fifth Edition
Plastics - Acrylonitrile/ Butadiene/Styrene (ABS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and
Determination of Properties Third Edition
Cork and Cork Products - Determination of Thermal Conductivity - Hot Plate Method First Edition
Cylindrical Cutters with Plain Bore and Key Drive - Metric Series First Edition
Slotting Cutters with Plain Bore and Key Drive - Metric Series First Edition
Shell End Mills with Plain Bore and Tenon Drive - Metric Series Second Edition
Side and Face Milling Cutters with Plain Bore and Key Drive - Metric Series First Edition
Leather - Sampling - Number of Items for a Gross Sample Second Edition
Leather Physical and mechanical tests Determination of thickness Second Edition; IULTCS/IUP 4
General Method for the Determination of Arsenic - Silver Diethyldithiocarbamate Photometric Method First Edition
Test Sieving - Part 1: Methods Using Test Sieves of Woven Wire Cloth and Perforated Metal Plate First Edition
Determination of Flash and Fire Points - Cleveland Open Cup Method Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - 34-Pole DTE/DCE Interface Connector
Mateability Dimensions and Contact Number Assignments Fourth Edition
Building Drawings - Projection Methods First Edition; Erratum-1972
Iron ores Determination of hygroscopic moisture in analytical samples Gravimetric, Karl Fischer and mass-loss methods Fifth
Edition
Iron ores Determination of total iron content Part 1: Titrimetric method after tin(II) chloride reduction Second Edition
Iron Ores - Determination of Silicon Content - Part 1: Gravimetric Methods First Edition
Iron Ores - Determination of Silicon Content - Part 2: Reduced Molybdosilicate Spectrophotometric Method First Edition; Replaces
ISO 4686
Iron Ores - Determination of Phosphorus Content - Titrimetric Method Third Edition
Statistical Interpretation of Test Results - Estimation of the Mean - Confidence Interval Second Edition
Booths for Simultaneous Interpretation - General Characteristics and Equipment Third Edition
Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 2: Unalloyed and Alloyed Steels with Specified
Elevated Temperature Properties First Edition; Replaces 2604-2 Along with 9329 Parts 1, 3 and 4
ISO
ISO
ISO
ISO
2598-2
2599
2602
2603
ISO
9329-2
ISO
ISO
ISO
2605-3
2624
2626
ISO
2631-1
ISO
2631-2
ISO
2631-4
ISO
ISO
2631-5
2633
ISO
ISO
2635
2639
Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body Vibration - Part 4: Guidelines for the Evaluation of
the Effects of Vibration and Rotational Motion on Passenger and Crew Comfort in Fixed-Guideway Transport Systems First Edition
Mechanical vibration and shock Evaluation of human exposure to whole-body vibration Part 5: Method for evaluation of vibration
containing multiple shocks First Edition
Determination of Imposed Floor Loads in Production Buildings and Warehouses First Edition
Aircraft - Conductors for General Purpose Aircraft Electrical Cables and Aerospace Applications - Dimensions and Characteristics
Second Edition
Steel - Determination and Verification of the Depth of Carburized and Hardened Cases Third Edition
ISO
ISO
ISO
ISO
ISO
2646
2647
2648
2669
2671
Wool - Measurement of the Length of Fibres Processed on the Worsted System, Using a Fibre Diagram Machine First Edition
Wool - Determination of Percentage of Medullated Fibres by the Projection Microscope First Edition
Wool - Determination of Fibre Length Distribution Parameters - Electronic Method First Edition
Environmental Tests for Aircraft Equipment - Steady-State Acceleration Second Edition
Environmental Tests for Aircraft Equipment - Part 3.4: Acoustic Vibration First Edition
ISO
2678
Environmental Tests for Aircraft Equipment - Insulation Resistance and High Voltage Tests for Electrical Equipment Second Edition
ISO
2685
Aircraft - Environmental Test Procedure for Airborne Equipment - Resistance to Fire in Designated Fire Zones Second Edition
Steel Products for Pressure Purposes - Derivation and Verification of Elevated Temperature Properties - Part 3: An Alternative
Procedure for Deriving the Elevated Temperature Yield or Proof Stress Properties When Data Are Limited First Edition
Copper and Copper Alloys - Estimation of Average Grain Size Second Edition
Copper - Hydrogen Embrittlement Test First Edition
Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body Vibration - Part 1: General Requirements Second
Edition; Replaces ISO 2631-3:1985; Corrected and Reprinted 07/15/1997; Supersedes NZS ISO 2631.1: 1985 and NZS ISO 2631.3:
1985
Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body Vibration - Part 2: Vibration in Buildings (1 Hz to 80
Hz) Second Edition; Supersedes NZS ISO 2631.2: 1989
ISO
2692
ISO
2695
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2696
2697
2698
2699
2701
2702
2704
2705
2709
ISO
2710-1
ISO
2710-2
ISO
ISO
ISO
ISO
2714
2715
2718
2719
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2720
2721
2722
2723
2724
2725-1
2725-2
ISO
ISO
ISO
2725-3
2726
2727
Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material
requirement (LMR) and reciprocity requirement (RPR) Second Edition
Fibre Building Boards - Hard and Medium Boards for General Purposes - Quality Specifications - Appearance, Shape and
Dimensional Tolerances First Edition
Fibre Building Boards - Hard and Medium Boards for General Purposes - Quality Specifications - Water Absorption and Swelling in
Thickness First Edition
Diesel Engines - Fuel Nozzles - SizeS" Second Edition"
Diesel Engines - Clamp-Mounted Fuel Injectors, Types 7 and 28 Second Edition
Diesel Engines - Flange-Mounted Fuel Injectors, SizeS" - Types 2
Drawn Wire for General Purpose Non-Alloy Steel Wire Ropes - Terms of Acceptance First Edition
Heat-Treated Steel Tapping Screws - Mechanical Properties Second Edition; CEN EN ISO 2702: 1994; AS/NZS 4412: 1996
Road Vehicles - M10 x 1 Spark-Plugs with Flat Seating and Their Cylinder Head Housing Fifth Edition
Road Vehicles - M12 X 1,25 Spark-Plugs with Flat Seating and Their Cylinder Head Housing Sixth Edition
Information and Documentation - Format for Information Exchange Third Edition
Reciprocating Internal Combustion Engines - Vocabulary - Part 1: Terms for Engine Design and Operation Moteurs Alternatifs A
Combustion Interne-Vocabulaire - Partie 1: Termes Relatifs A La Conception Et Au Fonctionnement Du Moteur First Edition; This
Standard Together with 2710-2 Cancels and Replaces ISO 2710: 1978
Reciprocating Internal Combustion Engines - Vocabulary - Part 2: Terms for Engine Maintenance Moteurs Alternatifs A Combustion
Interne - Vocabulaire - Partie 2: Termes Relatifs A La Maintenance Du Moteur First Edition
Liquid Hydrocarbons - Volumetric Measurement by Displacement Meter Systems Other Than Dispensing Pumps First Edition;
(Erratum-1982)
Liquid Hydrocarbons - Volumetric Measurement by Turbine Meter Systems First Edition
Standard Layout for a Method of Chemical Analysis by Gas Chromatography First Edition
Determination of Flash Point - Pensky-Martens Closed Cup Method Third Edition
Photography - General Purpose Photographic Exposure Meters (Photoelectric Type) - Guide to Product Specification First Edition
Photography - Cameras - Automatic Controls of Exposure First Edition; (ANSI PH3.301-1990)
Vitreous and Porcelain Enamels - Determination of Resistance to Citric Acid at Room Temperature Second Edition
Vitreous and Porcelain Enamels for Sheet Steel - Production of Specimens for Testing Second Edition
Vitreous and Porcelain Enamels for Cast Iron-Production of Specimens for Testing First Edition
Assembly tools for screws and nuts ù Square drive sockets ù Part 1: Hand-operated sockets Second Edition
Assembly tools for screws and nuts ù Square drive sockets ù Part 2: Machine-operated sockets (ôimpactö) Second Edition
Assembly Tools for Screws and Nuts - Square Drive Sockets - Part 3: Machine-Operated Sockets (Non-Impact") - Dimensions First
Edition"
Woodworking Tools - Metal-Bodied Bench Planes, Plane Cutters and Cap Irons Second Edition
Modular Units for Machine Tool Construction - Headstocks First Edition; (NZS 5216: 1974)
ISO
ISO
ISO
ISO
2729
2730
2733
2734
ISO
2736-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2738
2739
2740
2741
2742
2743
2744
2745
ISO
2746
ISO
ISO
ISO
ISO
ISO
2747
2748
2758
2759
2762
ISO
2768-1
ISO
ISO
ISO
ISO
ISO
ISO
2768-2
2769
2772-1
2772-2
2773-1
2773-2
ISO
ISO
ISO
2775
2776
2777
Woodworking Tools - Chisels and Gouges Second Edition
Woodworking Tools - Wooden Bodied Planes First Edition
Vitreous and Porcelain Enamels - Apparatus for Testing with Acid and Neutral Liquids and Their Vapours Second Edition
Vitreous and Porcelain Enamels - Apparatus for Testing with Alkaline Liquids Third Edition
Concrete Tests - Test Specimens - Part 2: Making and Curing of Test Specimens for Strength Tests First Edition [Replaced By: ISO
1920-3]
Sintered Metal Materials, Excluding Hardmetals - Permeable Sintered Metal Materials - Determination of Density, Oil Content and
Open Porosity Third Edition
Sintered metal bushes Determination of radial crushing strength Second Edition
Sintered metal materials, excluding hardmetals ù Tensile test pieces Fourth Edition
Zinc Alloys - Complexometric Determination of Magnesium First Edition
Vitreous and Porcelain Enamels - Determination of Resistance to Boiling Citric Acid Third Edition
Vitreous and Porcelain Enamels - Determination of Resistance to Condensing Hydrochloric Acid Vapour Second Edition
Vitreous and Porcelain Enamels - Determination of Resistance to Boiling Water and Water Vapour Third Edition
Vitreous and Porcelain Enamels - Determination of Resistance to Hot Sodium Hydroxide Second Edition
Vitreous and Porcelain Enamels - Enamelled Articles for Service under Highly Corrosive Conditions - High Voltage Test Second
Edition
Vitreous and Porcelain Enamels - Enamelled Cooking Utensils - Determination of Resistance to Thermal Shock Second Edition
Textile Machinery and Accessories - Lingoes for Jacquard Weaving Second Edition
Paper - Determination of Bursting Strength Third Edition
Board - Determination of Bursting Strength Third Edition
Hydrochloric Acid for Industrial Use - Determination of Soluble Sulphates - Turbidimetric Method First Edition
General Tolerances - Part 1: Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications First Edition;
(CEN EN 22768-1: 1993)
General Tolerances - Part 2: Geometrical Tolerances for Features without Individual Tolerance Indications First Edition; CEN EN
22768-2: 1993
Modular Units for Machine Tool Construction - Wing Bases for Slide Units First Edition; (NZS 5217: 1974)
Test Conditions for Box Type Vertical Drilling Machines - Testing of the Accuracy - Part I: Geometrical Tests First Edition
Test Conditions for Box Type Vertical Drilling Machines - Testing of the Accuracy - Part II: Practical Test First Edition
Test Conditions for Pillar Type Vertical Drilling Machines - Testing of the Accuracy - Part I: Geometrical Test First Edition
Test Conditions for Pillar Type Vertical Drilling Machines - Testing of the Accuracy - Part II: Practical Test First Edition
Office Machines and Printing Machines Used for Information Processing - Widths of One-Time Paper or Plastic Printing Ribbons and
Marking to Indicate the End of the Ribbons Second Edition
Modular Co-Ordination - Co-Ordinating Sizes for Doorsets - External and Internal First Edition
Modular Co-Ordination - Co-Ordinating Sizes for Rigid Flat Sheet Boards Used in Building First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2780
2781
2782
2784
2787
2788
2789
2790
2795
2796
2797
2800
2804
2806
2808
2810
ISO
2811-1
Milling cutters with tenon drive Interchangeability dimensions for cutter arbors Metric series Third Edition
Rubber, Vulcanized - Determination of Density Third Edition; Technical Corigendum 1:06/01/1996
Rubber, vulcanized or thermoplastic Determination of permeability to gases Third Edition
Continuous Forms Used for Information Processing - Sizes and Sprocket Feed Holes First Edition
Rotary and Percussive Pneumatic Tools - Performance Tests Second Edition
Documentation - Guidelines for the Establishment and Development of Monolingual Thesauri Second Edition
Information and documentation International library statistics Fourth Edition
Belt drives V-belts for the automotive industry and corresponding pulleys Dimensions Fourth Edition
Plain Bearings - Sintered Bushes - Dimensions and Tolerances Fourth Edition; (NZS/ISO 2795: 1991)
Cellular Plastics, Rigid - Test for Dimensional Stability Third Edition
Textile Glass - Rovings - Basis for a Specification Second Edition
Photography - Expendable Photoflash Lamps - Definition and Evaluation of Flashability First Edition; (Erratum-1980)
Wire, Bar or Tube Drawing Dies - As-Sintered Pellets of Hardmetal (Carbide) - Dimensions Second Edition
Industrial Automation Systems - Numerical Control of Machines - Vocabulary Second Edition
Paints and Varnishes - Determination of Film Thickness Fourth Edition
Paints and varnishes Natural weathering of coatings Exposure and assessment Second Edition
Paints and Varnishes - Determination of Density - Part 1: Pyknometer Method First Edition; Replaces ISO 2811 Supercedes ISO
8962
ISO
2811-2
Paints and Varnishes - Determination of Density - Part 2: Immersed Body (Plummet) Method First Edition; Replaces ISO 2811
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2811-3
2811-4
2812-1
2812-2
2812-3
2812-4
2812-5
ISO
ISO
ISO
ISO
ISO
2813
2814
2815
2817
2818
ISO
2819
Paints and Varnishes - Determination of Density - Part 3: Oscillation Method First Edition; Replaces ISO 2811 Supercedes ISO 8962
Paints and Varnishes - Determination of Density - Part 4: Pressure Cup Method First Edition; Replaces ISO 2811
Paints and varnishes ù Determination of resistance to liquids ù Part 1: Immersion in liquids other than water Second Edition
Paints and varnishes ù Determination of resistance to liquids ù Part 2: Water immersion method Second Edition
Paints and varnishes ù Determination of resistance to liquids ù Part 3: Method using an absorbent medium First Edition
Paints and varnishes ù Determination of resistance to liquids ù Part 4: Spotting methods First Edition
Paints and varnishes ù Determination of resistance to liquids ù Part 5: Temperature-gradient oven method First Edition
Paints and Varnishes - Determination of Specular Gloss of Non-Metallic Paint Films at 20 Degrees, 60 Degrees and 85 Degrees
Third Edition; AS/NZS 1580.602.2:1995; Corrigendum 1 02/15/1997
Paints and Varnishes - Comparison of Contrast Ratio (Hiding Power) of Paints of the Same Type and Colour First Edition
Paints and Varnishes - Buchholz Indentation Test Second Edition
Tobacco and Tobacco Products - Determination of Silicated Residues Insoluble in Hydrochloric Acid Second Edition
Plastics - Preparation of Test Specimens by Machining Third Edition
Metallic Coatings on Metallic Substrates - Electrodeposited and Chemically Deposited Coatings - Review of Methods Available for
Testing Adhesion Second Edition; (CEN EN ISO 2819: 1994) (PNS 686: 1990)
ISO
2820
Leather - Raw Hides of Cattle and Horses - Method of Trim First Edition; PNS 960:1986; Amendment 1 - 1996
ISO
ISO
ISO
ISO
ISO
2821
2822-1
2825
2826
2827
ISO
2828
ISO
ISO
ISO
ISO
ISO
2829
2830
2831
2832
2833
ISO
ISO
2834-1
2835
ISO
2836
ISO
2846-1
ISO
2846-2
ISO
ISO
2846-3
2846-4
Leather - Raw Hides of Cattle and Horses - Preservation by Stack Salting First Edition; PNS 961: 1986; Amendment 1 - 1996
Raw Cattle Hides and Calf Skins - Part 1: Descriptions of Defects First Edition
Spices and Condiments - Preparation of a Ground Sample for Analysis Second Edition
Apricots - Guide to Cold Storage First Edition
Photography - Electronic Flash Equipment - Determination of Light Output and Performance Second Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Fluorine Content - Alizarin Complexone and
Lanthanum Chloride Spectrophotometric Method First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Phosphorus Content - Reduced
Phosphomolybdate Spectrophotometric Method First Edition
Cryolite, Natural and Artificial - Determination of Aluminium Content - Atomic Absorption Method First Edition
Sodium Fluoride for Industrial Use - Determination of Water-Insoluble Matter First Edition
Sodium Fluoride for Industrial Use - Determination of Moisture Content First Edition
Sodium Fluoride for Industrial Use - Determination of Fluorine Content - Modified Willard-Winter Method First Edition
Graphic technology Laboratory preparation of test prints Part 1: Paste inks First Edition; Together with ISO 2834-2 and ISO 2834-3
Replaces ISO 2834:1999
Prints and Printing Inks - Assessment of Light Fastness First Edition
Graphic technology Prints and printing inks Assessment of resistance to various agents Third Edition; Cancels and Replaces ISO
2837:1996; ISO 11628:1995
Graphic technology Colour and transparency of printing ink sets for fourcolour printing Part 1: Sheet-fed and heat-set web offset
lithographic printing Second Edition
Graphic Technology - Colour and Transparency of Ink Sets for Four-Colour-Printing - Part 2: Coldset offset Lithographic Printing First
Edition
Graphic Technology - Colour and Transparency of Printing Ink Sets for Four-Colour-Printing - Part 3: Publication Gravure Printing
First Edition
Graphic Technology - Colour and Transparency of Ink Sets for Four-Colour-Printing - Part 4: Screen Printing First Edition
ISO
ISO
ISO
ISO
ISO
ISO
2846-5
2848
2851
2852
2853
2854
Graphic technology Colour and transparency of printing ink sets for four-colour printing Part 5: Flexographic printing First Edition
Building Construction - Modular Coordination - Principles and Rules Second Edition; (PNS 638: 1988)
Stainless Steel Bends and Tees for the Food Industry Second Edition
Stainless Steel Clamp Pipe Couplings for the Food Industry Second Edition
Stainless Steel Threaded Couplings for the Food Industry Second Edition
Statistical Interpretation of Data - Techniques of Estimation and Tests Relating to Means and Variances First Edition
ISO
2855
Radioactive Materials - Packagings - Tests for Contents Leakage and Radiation Leakage First Edition; (Amendment Slip-1976)
ISO
2857
ISO
2858
ISO
2859-1
ISO
ISO
2859-2
2859-3
ISO
2859-4
ISO
2859-5
ISO
ISO
ISO
ISO
2859-10
2860
2861-1
2861-2
ISO
ISO
2865
2867
ISO
2868
ISO
2869
ISO
2870
ISO
2871-1
ISO
ISO
ISO
ISO
ISO
ISO
2871-2
2873
2875
2876
2878
2881
Ground Thread Taps for ISO Metric Threads of Tolerances 4H to 8H and 4G to 6G Coarse and Fine Pitches - Manufacturing
Tolerances on the Threaded Portion First Edition; (Amendment 1-1984) (Amendment 2-1986) (Corrigendum 1-1990)
End-Suction Centrifugal Pumps (Rating 16 Bar) - Designation, Nominal Duty Point and Dimensions Second Edition; (CEN EN 22858:
1993)
Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-byLot Inspection Second Edition; Corrigendum 1: 03-01-2001
Sampling Procedures for Inspection by Attributes - Part 2: Sampling Plans Indexed by Limiting Quality (LQ) for Isolated Lot Inspection
First Edition
Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures Second edition
Sampling Procedures for Inspection by Attributes - Part 4: Procedures for Assessment of Declared Quality Levels Second Edition
Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit
(AQL) for lot-by-lot inspection First Edition
Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection
by attributes First Edition; Supersedes ISO 2859-0:1995
Earth-Moving Machinery - Minimum Access Dimensions Fourth Edition
Vacuum Technology - Quick-Release Couplings - Dimensions - Part I: Clamped Type First Edition
Vacuum Technology - Quick Release Couplings - Dimensions - Part 2: Screwed Type First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Boron Content - Curcumin Spectrophotometric
Method First Edition; Corrigendum 1: 1991
Earth-Moving Machinery - Access Systems Sixth Edition
Surface Active Agents - Detergents - Anionic-Active Matter Stable to Acid Hydrolysis - Determination of Trace Amounts First Edition
Surface Active Agents - Detergents - Anionic-Active Matter Hydrolyzable Under Alkaline Conditions - Determination of Hydrolyzable
and Non-Hydrolyzable Anionic-Active Matter First Edition
Surface Active Agents - Detergents - Determination of Anionic-Active Matter Hydrolyzable and Non-Hydrolyzable Under AcidConditions Second Edition
Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 1: High-Molecular-Mass Cationic-Active
Matter First Edition
Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 2: Cationic-Active Matter of Low
Molecular Mass (Between 200 and 500) First Edition Corrected and Reprinted 12/15/1991
Packaging - Complete, Filled Transport Packages and Unit Loads - Low Pressure Test Third Edition
Packaging - Complete, Filled Transport Packages and Unit Loads - Water-Spray Test Third Edition
Packaging - Complete, Filled Transport Packages - Rolling Test Second Edition; (CEN EN 22876: 1992)
Rubber - Antistatic and conductive products - Determination of electrical resistance Third Edition
Tobacco and Tobacco Products - Determination of Alkaloid Content - Spectrophotometric Method Third Edition
Paints and Varnishes - Determination of Viscosity Using Rotary Viscometers - Part 1: Cone-and-Plate Viscometer Operated at a High
Rate of Shear First Edition; Superseded by BS 3900-A7-1: 2000
Paints and Varnishes - Determination of Viscosity Using Rotary Viscometers - Part 2: Disc or Ball Viscometer Operated at a Specified
Speed First Edition
General Principles for Sampling Airborne Radioactive Materials First Edition
Modular Units for Machine Tool Construction - Centre Bases and Columns Second Edition
Austenitic cast irons - Classification Second edition
Rigid Cellular Plastics - Determination of Water Absorption Third Edition
Plastics - Impact-Resistant Polystyrene (PS-I) Moulding and Extrusion Materials - Part 1: Designation System and Basis for
Specifications Second Edition
Plastics Impact-resistant polystyrene (PS-I) moulding and extrusion materials Part 2: Preparation of test specimens and
determination of properties Third Edition
Plastics - Plasticized Poly(Vinyl Chloride) (PVC-P) Moulding and Extrusion Materials - Part 1: Designation System and Basis for
Specifications Third Edition
Plastics - Plasticized Poly(Vinyl Chloride) (PVC-P) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and
Determination of Properties Third Edition
ISO Metric Trapezoidal Screw Threads - Basic Profile and Maximum Material Profiles Second Edition
ISO Metric Trapezoidal Screw Threads - General Plan First Edition
ISO Metric Trapezoidal Screw Threads - Tolerances Second Edition
ISO Metric Trapezoidal Screw Threads - Basic Dimensions First Edition
ISO
2884-1
ISO
ISO
ISO
ISO
ISO
2884-2
2889
2891
2892
2896
ISO
2897-1
ISO
2897-2
ISO
2898-1
ISO
ISO
ISO
ISO
ISO
2898-2
2901
2902
2903
2904
ISO
2905
Modular Units for Machine Tool Construction - Spindle Noses and Adjustable Adaptors for Multi-Spindle Heads Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
2906
2907
2908
2909
2910
2911
ISO
ISO
ISO
ISO
ISO
ISO
2912
2913
2915
2916
2917
2918
Cinematography - Image Area Produced by Camera Aperture on 35 mm Motion-Picture Film - Position and Dimensions Third Edition
Cinematography - Maximum Projectable Image Area on 35 mm Motion-Picture Film - Position and Dimensions Third Edition
Petroleum Waxes - Determination of Oil Content First Edition
Petroleum products - Calculation of viscosity index from kinematic viscosity Third Edition
Cinematography ù Screen luminance and chrominance for the projection of motion pictures Third edition
Sweetened Condensed Milk - Determination of Sucrose Content - Polarimetric Method Second Edition
Modular Units for Machine Tool Construction - Multi-Spindle Heads - Casing and Input Drive Shaft Dimensions First Edition;
Amendment 1: 1982
Wool - Colorimetric Determination of Cystine Plus Cysteine in Hydrolysates First Edition
Wool - Determination of Cysteic Acid Content of Wool Hydrolysates by Paper Electrophoresis and Colorimetry First Edition
Wool - Determination of Alkali Content First Edition
Meat and Meat Products - Measurement of pH - Reference Method Second Edition
Meat and Meat Products - Determination of Nitrite Content (Reference Method) First Edition; (PNS 608: 1992)
Radioactive Protection - Sealed Radioactive Sources - General Requirements and Classification Second Edition; Cancels and
Replaces ISO 1677: 1977
Whey Cheese - Determination of Dry Matter Content (Reference Method) Second Edition: IDF 58
Rubber, Vulcanized - Determination of Low-Temperature Characteristics - Temperature-Retraction Procedure (TR Test) Fourth
edition
Acoustics - Measurement of Airborne Sound Emitted by Vessels on Inland Waterways and Harbours Second Edition
Acoustics - Measurement of Noise on Board Vessels Second Edition; Technical Corrigendum 1-1997
Solid and Segmental Circular Saws for Cold Cutting of Metals - Interchangeability Dimensions of the Drive - Saw Diameter Range
224 to 2 240 mm First Edition
Aluminium oxide used for the production of primary aluminium Particle size analysis for the range 45 Ám to 150 Ám Method using
electroformed sieves Second Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Sampling First Edition
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar
(2,5 MPa) Specification Third Edition
Rubber Hoses and Hose Assemblies for Bulk Fuel Delivery by Truck - Specification Third Edition
Rubber, Raw Natural - Determination of Plasticity Retention Index (PRI) Third Edition
Anodizing of Aluminium and Its Alloys - Assessment of Quality of Sealed Anodic Oxide Coatings by Measurement of Admittance or
Impedance Second Edition
Modular Units for Machine Tool Construction - Wing Base for Columns First Edition; (NZS 5220: 1974)
Circular Saw Blades for Woodworking - Dimensions First Edition
Assembly Tools for Screws and Nuts - Hexagon Socket Screw Keys Fifth Edition
Plain End Seamless Steel Tubes for Mechanical Application First Edition
Hollow Steel Bars for Machining First Edition; (Erratum-1979)
Cinematography - Picture Image Area on 35 mm Motion-Picture Release Prints - Position and Dimensions Third Edition
ISO
ISO
2919
2920
ISO
ISO
ISO
2921
2922
2923
ISO
2924
ISO
ISO
2926
2927
ISO
ISO
ISO
2928
2929
2930
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2931
2934
2935
2936
2937
2938
2939
ISO
ISO
ISO
2940-1
2940-2
2941
ISO
ISO
ISO
2942
2943
2944
Milling Cutters Mounted on Centring Arbors Having a 7/24 Taper - Fitting Dimensions - Centring Arbors First Edition; (Erratum-1977)
Milling Cutters Mounted on Centring Arbors Having a 7/24 Taper - Inserted Tooth Cutters First Edition; (Erratum-1977)
Hydraulic Fluid Power - Filter Elements - Verification of Collapse/Burst Resistance First Edition
Hydraulic Fluid Power - Filter Elements - Verification of Fabrication Integrity and Determination of the First Bubble Point Fourth
Edition
Hydraulic Fluid Power - Filter Elements - Verification of Material Compatibility with Fluids Second Edition
Fluid Power Systems and Components - Nominal Pressures Second Edition
ISO
ISO
ISO
2947
2950
2951
Textiles - Integrated Conversion Table for Replacing Traditional Yarn Numbers by Rounded Values in the Tex System First Edition
Brown Coals and Lignites - Classification by Types on the Basis of Total Moisture Content and Tar Yield First Edition
Vulcanized Rubber - Determination of Insulation Resistance First Edition
ISO
2953
ISO
ISO
ISO
ISO
2954
2958
2959
2961
ISO
ISO
2962
2964
ISO
2965
ISO
2969
ISO
ISO
ISO
ISO
2971
2972
2974
2975-1
ISO
2975-2
ISO
2975-3
ISO
2975-6
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
2975-7
2976
2977
2982-1
2982-2
2992
2993
2997
3001
ISO
3002-1
Machanical Vibration - Balancing Machines - Description and Evaluation Third Edition
Mechanical Vibration of Rotating and Reciprocating Machinery - Requirements for Instruments for Measuring Vibration Severity First
Edition
Road Vehicles - Exterior Protection for Passenger Cars First Edition
Textiles - Woven Fabric Descriptions First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of an Adsorption Index First Edition
Cheese and Processed Cheese Products - Determination of Total Phosphorus Content - Molecular Absorption Spectrometric Method
Second Edition
Aerospace - Tubing - Outside Diameters and Thicknesses - Metric Dimensions Second Edition
Material Used as Cigarette Papers, Filter Plug Wrap and Filter Joining Paper, Including Materials having an Oriented Permeable
Zone - Determination of Air Permeability Second Edition
Cinematography - B-Chain Electro-Acoustic Response of Motion-Picture Control Rooms and Indoor Theatres - Specifications and
Measurements Second Edition
Cigarettes and Filter Rods - Determination of Nominal Diameter - Method Using a Laser Beam Measuring Apparatus Third Edition
Numerical Control of Machines - Symbols Second Edition
Diesel engines - High-pressure fuel injection pipe end-connections with 60 Degree female cone Sixth Edition
Measurement of Water FLow in Closed Conduits - Tracer Methods - Part I: General First Edition
Measurement of Water Flow in Closed Conduits - Tracer Methods - Part II: Constant Rate Injection Method Using Non-Radioactive
Tracers First Edition
Measurement of Water Flow in Closed Conduits - Tracer Methods - Part III: Constant Rate Injection Method Using Radioactive
Tracers First Edition
Measurement of Water Flow in Closed Conduits - Tracer Methods - Part VI: Transit Time Method Using Non-Radioactive Tracers
First Edition
Measurement of Water Flow in Closed Conduits - Tracer Methods - Part VII: Transit Time Method Using Radioactive Tracers First
Edition
Coated abrasives Abrasive belts Selection of width/length combinations Second Edition
Petroleum Products and Hydrocarbon Solvents - Determination of Aniline Point and Mixed Aniline Point Third Edition
Rolling Bearings - Accessories - Part 1: Tapered Sleeves - Dimensions First Edition; Replaces ISO 113-1: 1979
Rolling Bearings - Accessories - Part 2: Locknuts and Locking Devices - Dimensions Second Edition
Ammonium Sulphate for Industrial Use - Determination of Iron Content - 2,2'-Bipyridyl Photometric Method First Edition
Ammonium Sulphate for Industrial Use - Determination of Free Acidity - Titrimetric Method First Edition
Phosphoric Acid for Industrial Use - Determination of Sulphate Content - Method by Reduction and Titrimetry First Edition
Plastics - Epoxy Compounds - Determination of Epoxy Equivalent Fourth Edition
Basic Quantities in Cutting and Grinding - Part 1: Geometry of the Active Part of Cutting Tools - General Terms, Reference Systems,
Tool and Working Angles, Chip Breakers Second Edition; (Amendment 1-1992)
Basic Quantities in Cutting and Grinding - Part 2: Geometry of the Active Part of Cutting Tools - General Conversion Formulae to
Relate Tool and Working Angles First Edition
Basic Quantities in Cutting and Grinding - Part 3: Geometric and Kinematic Quantities in Cutting First Edition
Basic Quantities in Cutting and Grinding - Part 4: Forces, Energy, Power First Edition
ISO
ISO
ISO
3002-2
3002-3
3002-4
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3002-5
3005
3006
3007
3008
3009
3010
3011
ISO
ISO
ISO
ISO
ISO
ISO
3012
3013
3014
3015
3016
3018
ISO
3019-1
ISO
ISO
ISO
3019-2
3022
3023
ISO
3024
ISO
ISO
ISO
3026
3028
3030
Basic Quantities in Cutting and Grinding - Part 5: Basic Terminology for Grinding Processes Using Grinding Wheels First Edition
Textiles - Determination of Dimensional Change of Fabrics Induced by Free-Steam Second Edition
Road vehicles Passenger car wheels for road use Test methods Fourth edition
Petroleum Products and Crude Petroleum - Determination of Vapour Pressure - Reid Method Third Edition
Fire-resistance tests ù Door and shutter assemblies Third edition
Fire-resistance tests Elements of building construction Glazed elements Second Edition
Basis for design of structures Seismic actions on structures Second Edition
Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Ozone Cracking Under Static Conditions Third Edition
Petroleum Products - Determination of Thiol (Mercaptan) Sulfur in Light and Middle Distillate Fuels - Potentiometric Method Third
Edition
Petroleum Products - Determination of the Freezing Point of Aviation Fuels First Edition
Petroleum Products - Determination of the Smoke Point of Kerosine Third Edition
Petroleum Products - Determination of Cloud Point Second Edition; (CEN EN 23015: 1994)
Petroleum Products - Determination of Pour Point Second Edition; Corrected and Reprinted - 1995
Rectangular Textile Floor Coverings - Determination of Dimensions First Edition (AS/NZS 2111.20: 1996)
Hydraulic Fluid Power - Dimensions and Identification Code for Mounting Flanges and Shaft Ends of Displacement Pumps and
Motors - Part 1: Inch Series Shown in Metric Units Second Edition; Supersedes ISO 3019/1
Hydraulic fluid power Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors
Part 2: Metric series Third Edition; Technical Corrigendum 1: 12/01/2006;:1988 [Replaced: ISO 3019-3]
Cinematography - 35 mm Motion-Picture Film Perforated 16 mm (1-3-0) - Cutting and Perforating Dimensions Third Edition
Cinematography - 65 mm and 70 mm Unexposed Motion-Picture Film - Cutting and Perforating Dimensions Fourth Edition
Cinematography - Motion-Picture Camera Cartridge, 8 mm Type S, Model I - Camera Run Length, Perforation Cut-Out and End-ofRun Notch in Film - Specifications Second Edition
Cinematography - Printed 8 mm Type S Image Area on 35 mm Motion-Picture Film Perforated 8 mm Type S, 2R-4.227 (1664) or 5R4.234 (1667) - Position and Dimensions Second Edition
Photography - Camera Flash Illuminants - Determination of ISO Spectral Distribution Index (ISO/SDI) Second Edition
Roller Bearings - Radial Needle Roller and Cage Assemblies - Dimensions and Tolerances Second Edition
ISO
ISO
3031
3033-1
Roller Bearings - Thrust Needle Roller and Cage Assemblies, Thrust Washers - Boundary Dimensions and Tolerances Third Edition
Oil of spearmint Part 1: Native type (Mentha spicata L.) First Edition; Supersedes ISO 3033:1998
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3033-2
3033-3
3033-4
3034
3035
3036
3037
3038
3039
3040
ISO
ISO
ISO
ISO
3042
3043
3044
3045
ISO
ISO
ISO
ISO
3046-1
3046-3
3046-4
3046-5
ISO
3046-6
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3047
3048
3049
3051
3052
3053
3054
3055
3056
3057
3058
Oil of spearmint Part 2: Chinese type (80 % and 60 %) (Mentha viridis L. var. crispa Benth.), redistilled oil First Edition; Supersedes
ISO 3033:1998
Oil of spearmint Part 3: Indian type (Mentha spicata L.), redistilled oil First Edition; Supersedes ISO 3033:1998
Oil of spearmint Part 4: Scotch variety (Mentha Î gracilis Sole) First Edition; Supersedes ISO 3033:1998
Corrugated Fibreboard - Determination of Thickness First Edition
Single-Faced and Single-Wall Corrugated Fibreboard - Determination of Flat Crush Resistance Second Edition
Board - Determination of Puncture Resistance First Edition
Corrugated fibreboard ù Determination of edgewise crush resistance (unwaxed edge method) Fourth Edition
Corrugated Fibreboard - Determination of the Water Resistance of the Glue Bond by Immersion First Edition
Corrugated Fibreboard - Determination of the Grammage of the Component Papers After Separation First Edition
Technical Drawings - Dimensioning and Tolerancing - Cones Second Edition
Cinematography - Labelling of Containers for Raw-Stock Motion-Picture Films and Magnetic Films - Minimum Information
Specifications Third Edition; Corrigendum 1:2/1/2004
Oil of Pimento Berry First Edition
Oil of Eucalyptus Citriodora Hook. Second Edition
Oil of bay [Pimenta racemosa (Mill.) J.W. Moore] Second Edition
Reciprocating Internal Combustion Engines - Performance - Part 1: Declarations of Power, Fuel and Lubricating Oil Consumptions,
and Test Methods - Additional Requirements for Engines for General Use Fifth Edition
Reciprocating Internal Combustion Engines - Performance - Part 3: Test Measurements Third Edition
Reciprocating Internal Combustion Engines - Part 4: Speed Governing Second Edition
Reciprocating Internal Combustion Engines - Performance - Part 5: Torsional Vibrations Second Edition
Reciprocating Internal Combustion Engines - Performance - Part 6: Overspeed Protection Third Edition; Corrected and Reprinted
12/15/1991
Cinematography - Spool, Daylight Loading Type, for 35 mm Motion-Picture Cameras (Capacity 30 m - 100 ft) - Dimensions Second
Edition
Gypsum Plasters - General Test Conditions First Edition
Gypsum Plasters - Determination of Physical Properties of Powder First Edition
Gypsum Plasters - Determination of Mechanical Properties First Edition
Gypsum Plasters - Determination of Water of Crystallization Content First Edition
Oil of grapefruit (Citrus Î paradisi Macfad.), obtained by expression Second Edition
Oil of Lavandin Abrial (Lavandula Angustifolia Miller X Lavandula Latifolia Medikus), French Type Third Edition
Kitchen Equipment - Coordinating Sizes Second Edition
Non-Calibrated Round Steel Link Lifting Chain and Chain Slings - Use and Maintenance Second Edition
Non-Destructive Testing - Metallographic Replica Techniques of Surface Examination Second Edition
Non-Destructive Testing - Aids to Visual Inspection - Selection of Low-Power Magnifiers Second Edition
Non-Destructive Testing - Penetrant Testing and Magnetic Particle Testing - Viewing Conditions Second Edition; Corrected and
Reprinted: 01/15/2002
Cotton Fibres - Determination of Breaking Tenacity of Flat Bundles First Edition
Oil of Black Pepper First Edition
Oil of ylang-ylang [Cananga odorata (Lam.) Hook. f. et Thomson forma genuina] Second Edition
Oil of Petitgrain, Paraguayan Type (Citrus Aurantium L. ssp. Aurantium, syn. Citrus Aurantium L. ssp. Amara var. Pumilia) Second
Edition
Oil of Australian Eucalyptus, 80 to 85 % Cineole Content First Edition
Duplicating Machines - Registration Second Edition
End-Suction Centrifugal Pumps - Dimensions of Cavities for Mechanical Seals and for Soft Packing Second Edition
Acceptance Conditions for Boring and Milling Machines with Horizontal Spindle - Testing of the Accuracy - Part 0: General
Introduction Second Edition
Test Conditions for Boring and Milling Machines with Horizontal Spindle - Part 2: Table-Type Machines Third Edition
Test Conditions for Boring and Milling Machines with Horizontal Spindle - Testing of the Accuracy - Part 3: Floor Type Machines with
Detached,Stationary Work-Holding Table Second Edition
Test Conditions for Boring and Milling Machines with Horizontal Spindle - Testing of the Accuracy - Part 4: Planer Type Machines with
Movable Column Second Edition
Textiles - Determination of pH of the Aqueous Extract Third Edition
Wool - Determination of Solubility in Alkali First Edition
Wool - Determination of Acid Content First Edition
Wool - Determination of Dichloromethane-Soluble Matter in Combed Sliver First Edition
ISO
ISO
ISO
ISO
3059
3060
3061
3063
ISO
ISO
ISO
ISO
3064
3065
3066
3069
ISO
ISO
3070-0
3070-2
ISO
3070-3
ISO
ISO
ISO
ISO
ISO
3070-4
3071
3072
3073
3074
ISO
3075
Short Link Chain for Lifting Purposes - Grade S (6), Non-Calibrated, for Chain Slings, Etc. First Edition; (NZS/ISO 3075: 1980)
ISO
ISO
ISO
ISO
ISO
3076
3077
3078
3082
3084
Short Link Chain for Lifting Purposes - Grade T (8), Non-Calibrated, for Chain Slings, Etc. Second Edition; (NZS/ISO 3076: 1984)
Short Link Chain for Lifting Purposes - Grade T, (Types T, DAT and DT), Fine Tolerance Hoist Chain Third Edition
Shipbuilding - Cargo Winches Second Edition
Iron Ores - Sampling and Sample Preparation Procedures Third Edition
Iron Ores - Experimental Methods for Evaluation of Quality Variation Third Edition
ISO
ISO
ISO
ISO
ISO
3085
3086
3087
3089
3091
Iron Ores - Experimental Methods for Checking the Precision of Sampling, Sample Preparation and Measurement Fourth Edition
Iron ores Experimental methods for checking the bias of sampling Fourth Edition
Iron Ores - Determination of the Moisture Content of a Lot Third Edition
Machine tools Test conditions for self-centring, manually-operated chucks with one-piece jaws Third Edition
Meat and Meat Products - Determination of Nitrate Content (Reference Method) First Edition
Wheat, rye and respective flours, durum wheat and durum wheat semolina Determination of the Falling Number according to
Hagberg-Perten Third Edition
Railway applications Acoustics Measurement of noise emitted by railbound vehicles Second Edition
Rolling Bearings - Needle Rollers - Dimensions and Tolerances Second Edition; Corrigendum 1 07/15/1999; Replaces ISO 6193;
1980
Technical Product Documentation - Lettering - Part 0: General Requirements First Edition
Technical Product Documentation - Lettering - Part 2: Latin Alphabet, Numerals and Marks Second Edition
Technical Product Documentation - Lettering - Part 3: Greek Alphabet Second Edition
Technical Product Documentation - Lettering - Part 4: Diacritical and Particular Marks for the Latin Alphabet Second Edition
ISO
ISO
3093
3095
ISO
ISO
ISO
ISO
ISO
3096
3098-0
3098-2
3098-3
3098-4
ISO
ISO
ISO
3098-5
3098-6
3103
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3104
3105
3107 CORR 1
3107
3108
3110
3111
3112
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3114
3116
3117
3126
3127
3129
3130
3131
3132
3133
3134-1
Unplasticized Polyvinyl Chloride (PVC) Pipes for Potable Water Supply - Extractability of Lead and Tin - Test Method First Edition
Magnesium and magnesium alloys ù Wrought magnesium alloys Fourth edition
Tangential Keys and Keyways First Edition
Plastics piping systems Plastics components Determination of dimensions Second edition
Thermoplastics Pipes - Determination of Resistance to External Blows - Round-the-Clock Method Second Edition
Wood - Sampling Methods and General Requirements for Physical and Mechanical Tests First Edition; (PNS 968: 1989)
Wood - Determination of Moisture Content for Physical and Mechanical Tests First Edition
Wood - Determination of Density for Physical and Mechanical Tests First Edition
Wood - Testing in Compression Perpendicular to Grain First Edition; (PNS 969: 1989)
Wood - Determination of Ultimate Strength in Static Bending First Edition
Light Metals and Their Alloys - Terms and Definitions - Part 1: Materials First Edition; (Corrected and Reprinted - 1989)
ISO
3134-2
Light Metals and Their Alloys - Terms and Definitions - Part 2: Unwrought Products First Edition; (Corrected and Reprinted - 1989)
Technical Product Documentation - Lettering - Part 5: CAD Lettering of the Latin Alphabet, Numerals and Marks First Edition
Technical Product Documentation - - Lettering - Part 6: Cyrillic Alphabet First Edition
Tea - Preparation of Liquor for Use in Sensory Tests First Edition
Petroleum Products - Transparent and Opaque Liquids - Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity
Second Edition; Corrigendum 1-1997;
Glass Capillary Kinematic Viscometers - Specifications and Operating Instructions Second Edition
Dentistry ù Zinc oxide/eugenol and zinc oxide/non-eugenol cements TECHNICAL CORRIGENDUM 1 Third Edition
Dentistry ù Zinc oxide/eugenol and zinc oxide/non-eugenol cements Third Edition
Steel Wire Ropes for General Purposes - Determination of Actual Breaking Load First Edition
Copper Alloys - Determination of Aluminium as Alloying Element - Volumetric Method First Edition
Copper Alloys - Determination of Tin as Alloying Element - Volumetric Method First Edition
Copper and Copper Alloys - Determination of Lead - Extracting Titration Method First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3134-3
3134-4
3134-5
3136
3137
3139
3140
ISO
3141
ISO
3142
ISO
3143
ISO
ISO
ISO
ISO
3146
3150
3154
3155
ISO
ISO
ISO
ISO
3156
3157
3158
3159
ISO
3160-1
ISO
3160-2
ISO
ISO
3160-3
3161
ISO
ISO
3164
3165
ISO
3166-1 CORR 1
Light Metals and Their Alloys - Terms and Definitions - Part 3: Wrought Products First Edition; (Corrected and Reprinted - 1989)
Light Metals and Their Alloys - Terms and Definitions - Part 4: Castings First Edition; (Corrected and Reprinted - 1989)
Light Metals and Their Alloys - Terms and Definitions - Part 5: Methods of Processing and Treatment First Edition
Rubber Latex - Styrene-Butadiene - Determination of Bound Styrene Content Second Edition
Anhydrous Hydrogen Fluoride for Industrial Use - Sampling First Edition
Aqueous Hydrofluoric Acid for Industrial Use - Sampling and Methods of Test Second Edition; Amendment 1: 1980
Oil of sweet orange [Citrus sinensis (L.) Osbeck], obtained by mechanical treatment Third Edition
Oil of Clove Leaf [Syzygium Aromaticum (L.) Merr. Et Perry, Syn. Eugenia Caryophyllus (Sprengel) Bullock Et S. Harrison] Third
Edition
Oil of Clove Buds [Syzygium Aromaticum (L.) Merr. Et Perry, Syn. Eugenia Caryophyllus (Sprengel) Bullock Et S. Harrison] Second
Edition
Oil of Clove Stems [Syzygium Aromaticum (L.) Merr. Et Perry, Syn. Eugenia Caryophyllus (Sprengel) Bullock Et S. Harrison] Second
Edition
Plastics - Determination of Melting Behaviour (Melting Temperature or Melting Range) of Semi-Crystalline Polymers by Capillary
Tube and Polarizing-Microscope Methods Third Edition; Technical Corrigendum 1: 10/15/2002
Radiators, Convectors and Similar Appliances - Calculation of Thermal Output and Presentation of Results First Edition
Stranded Wire Ropes for Mine Hoisting - Technical Delivery Requirements Second Edition
Stranded Wire Ropes for Mine Hoisting - Fibre Components - Characteristics and Tests First Edition
Stranded Wire Ropes for Mine Hoisting - Impregnating Compounds, Lubricants and Service Dressings - Characteristics and Tests
First Edition
Radioluminescence for Time Measurement Instruments - Specifications Second Edition
Timekeeping Instruments - Symbolization of Control Positions First Edition
Timekeeping Instruments - Wrist-Chronometers with Spring Balance Oscillator First Edition
Watch-Cases and Accessories - Gold Alloy Coverings - Part 1: General Requirements Third Edition; Amendment 1: 02-15-2000
Watch-cases and accessories Gold alloy coverings Part 2: Determination of fineness, thickness, corrosion resistance and adhesion
Third Edition
Watch Cases and Accessories - Gold Alloy Coverings - Part 3: Abrasion Resistance Tests of a Type of Coating on Standard Gauges
First Edition
Aerospace - UNJ Threads - General Requirements and Limit Dimensions Third Edition
Earth-Moving Machinery - Laboratory Evaluations of Protective Structures - Specifications for Deflection-Limiting Volume Fifth Edition
Sampling of Chemical Products for Industrial Use - Safety in Sampling First Edition
Codes for the representation of names of countries and their subdivisions ù Part 1: Country codes Codes pour la reprÚsentation des
noms de pays et de leurs subdivisions ù Partie 1: Codes de pays First Edition
ISO
3166-1
ISO
3166-2
ISO
ISO
3166-3
3167
ISO
ISO
ISO
ISO
3168
3170
3171
3174
ISO
3175-1
ISO
3175-2
ISO
3175-3
ISO
ISO
3175-4
3179
ISO
ISO
3183
3184
ISO
3185
ISO
ISO
ISO
3186
3187
3188
ISO
3189-1
Codes for the representation of names of countries and their subdivisions Part 1: Country codes Codes pour la reprÚsentation des
noms de pays et de leurs subdivisions Partie 1: Codes de pays Second Edition
Codes for the Representation of Names of Countries and Their Subdivisions - Part 2: Country Subdvision Code Codes pour Ia
representation des noms de pays et de leurs subdivisions - Partie 2: Code pour les subdivisions de pays First Edition; Replaces ISO
3166
Codes for the Representation of Names of Countries and Their Subdivisions - Part 3: Code for Formerly Used Names of Countries
Codes Pour La Representation Des Noms De Pays Et De Leurs Subdivisions - Partie 3: Code Pour Les Noms De Pays
Anterieurement Utilises First Edition; Replaces ISO 3166
Plastics - Multipurpose Test Specimens Fourth Edition
Aerospace - Nuts, Anchor, Self-Locking, Fixed, Single Lug with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at
Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature/315 Degrees Celsius and 1 100 MPa (at Ambient
Temperature)/425 Degrees Celsius - Dimensions Second Edition
Petroleum Liquids - Manual Sampling Third Edition
Petroleum Liquids - Automatic Pipeline Sampling Second Edition
Aircraft - Connections for Checking Hydraulic Systems by Ground Appliances - Threaded Type Second Edition
Textiles - Dry Cleaning and Finishing - Part 1: Method for Assessing the Cleanability of Textiles and Garments First Edition; Technical
Corrigendum: 10/01/2002
Textiles - Dry Cleaning and Finishing - Part 2: Procedures for Tetrachloroethene First Edition; Technical Corrigendum: 10/01/2002
Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 3: Procedure for testing performance when
cleaning and finishing using hydrocarbon solvents First Edition
Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 4: Procedure for testing performance when
cleaning and finishing using simulated wetcleaning First Edition
Coniferous Sawn Timber - Nominal Dimensions First Edition
Petroleum and natural gas industries ù Steel pipe for pipeline transportation systems Second Edition [Superseded: ISO 3183-1, ISO
3183-2, ISO 3183-3]
Reach and Straddle Fork-Lift Trucks - Stability Tests Second Edition; Corrigendum 1: 06-01-2000
Aerospace - Bolts, Normal Bihexagonal Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or
Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition
Aerospace - Bolts, Large Bihexagonal Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or
Uncoated, Strength Classes 1 250 MPa to 1 800 MPa - Dimensions First Edition
Refractory Products - Determination of Creep in Compression First Edition
Starches and Derived Products - Determination of Nitrogen Content by the Kjeldahl Method - Titrimetric Method First Edition
Sockets for Wire Ropes for General Purposes - Part 1: General Characteristics and Conditions of Acceptance First Edition; Technical
Corrigendum 1: 02/15/2002
ISO
ISO
3189-2
3189-3
ISO
3190
ISO
3191
ISO
3193
ISO
ISO
ISO
3195
3196
3199
ISO
3202
ISO
ISO
ISO
3203
3205
3208
ISO
3209
ISO
3210
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3211
3213
3214
3215
3216
3217
3218
ISO
ISO
3219
3220
Sockets for Wire Ropes for General Purposes - Part 2: Special Requirements for Sockets Produced by Forging or Machined from the
Solid First Edition
Sockets for Wire Ropes for General Purposes - Part 3: Special Requirements for Sockets Produced by Casting First Edition
Test Conditions for Turret and Single Spindle Co-Ordinate Drilling Machines with Vertical Spindle - Testing of the Accuracy First
Edition
Aerospace - Nuts, Anchor, Self-Locking, Fixed, Single Lug, Reduced Series, with Counterbore, with MJ Threads, Classifications: 1
100 MPa (at Ambient Temperature)/ 235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/ 315 Degrees Celsius and 1 100
MPa (at Ambient Temperature)/ 425 Degrees Celsius - Dimensions Second Edition
Aerospace - Bolts, Normal Hexagonal Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or
Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition; Corrigendum 1: 1992
Sodium Hydroxide for Industrial Use - Sampling - Test Sample - Preparation of the Main Solution for Carrying out Certain
Determinations First Edition
Sodium Hydroxide for Industrial Use - Determination of Carbonates Content - Titrimetric Method First Edition
Sodium Chlorate for Industrial Use - Determination of Chlorate Content - Dichromate Titrimetric Method First Edition
Aerospace - Screws, Pan Head, Internal Offset Cruciform Ribbed or Unribbed Drive, Threaded to Head, MJ Threads, Metallic
Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions Second Edition
Aerospace - Bolts, Normal Bihexagonal Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated
or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition
Preferred Test Temperatures First Edition; (Amendment Slip-1976)
Road Vehicles - Evaluation of Protrusions Inside Passenger Cars First Edition; Amendment-1974
Aerospace - Nuts, Anchor, Self-Locking, Floating, Two-Lug, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at
Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient
Temperature)/425 Degrees Celsius - Dimensions Second Edition
Anodizing of Aluminium and Its Alloys - Assessment of Quality of Sealed Anodic Oxide Coatings by Measurement of the Loss of Mass
After Immersion in Phosphoric-Chromic Acid Solution Second Edition
Anodizing of Aluminium and Its Alloys - Assessment of Resistance of Anodic Oxide Coatings to Cracking by Deformation Second
Edition
Polypropylene (PP) Pipes - Effect of Time and Temperature on the Expected Strength Second Edition
Oil of Litsea Cubeba ( Litsea Cubeba Pers.) Second Edition
Oil of Nutmeg, Indonesian Type (Mysristica Fragrans Houtt.) Second Edition
Oil of Cassia, Chinese Type (Cinnamomum Aromaticum Nees, Syn. Cinnamomum Cassia Nees Ex Blume) Second Edition
Oil of Lemongrass (Cymbopogon citratus) First Edition
Essential Oils - Principles of Nomenclature First Edition
Plastics - Polymers/Resins in the Liquid State or as Emulsions or Dispersions - Determination of Viscosity Using a Rotational
Viscometer with Defined Shear Rate Second Edition; (CEN EN ISO 3219: 1995)
Copper and Copper Alloys - Determination of Arsenic - Photometric Method First Edition
ISO
3221
ISO
3222
ISO
3223
ISO
3224
ISO
ISO
3225
3228
ISO
ISO
3230
3231
ISO
3233
Aerospace - Nuts, Anchor, Self-Locking, Fixed, 90 Degree Corner, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at
Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient
Temperature)/425 Degrees Celsius - Dimensions Second Edition
Aerospace - Nuts, Anchor, Self-Locking, Fixed, Closed Corner, Reduced Series, with Counterbore, with MJ Threads, Classifications:
1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100
MPa (at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition
Aerospace - Nuts, Anchor, Self-Locking, Fixed, Two Lug, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient
Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient
Temperature)/425 Degrees Celsius - Dimensions Second Edition
Aerospace - Nuts, Anchor, Self-Locking, Floating, Single Lug, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at
Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient
Temperature)/425 degrees Celsius - Dimensions Second Edition
Aerospace - Nuts, Anchor, Self-Locking, Fixed, Two Lug, Reduced Series, with Counterbore, with MJ Threads, Classifications: 1 100
MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at
Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition
Rolling Bearings - Cast and Pressed Housings for Insert Bearings Third Edition
Aerospace - Rivets, Solid, 100 Degree Normal Countersunk Head with Dome, Metallic Material, with or without Surface Treatment Dimensions First Edition
Paints and Varnishes - Determination of Resistance to Humid Atmospheres Containing Sulphur Dioxide Second Edition
Paints and Varnishes - Determination of Percentage Volume of Non-Volatile Matter by Measuring the Density of a Dried Coating
Third Edition; Corrigendum 1 07/15/1999
ISO
ISO
ISO
ISO
ISO
ISO
3245
3248
3251
3252
3253
3255
Rolling Bearings - Needle Roller Bearings, Drawn Cup without Inner Rings - Boundary Dimensions and Tolerances Second Edition
Paints and Varnishes - Determination of the Effect of Heat Second Edition
Paints, Varnishes and Plastics - Determination of Non-Volatile-Matter Content Third Edition;
Powder Metallurgy - Vocabulary Metallurgie Des Poudres - Vocabulaire Fourth Edition
Gas Welding Equipment - Hose Connections for Equipment for Welding, Cutting and Allied Processes Second Edition
Magnesium and Magnesium Alloys - Determination of Aluminium - Chromazurol S Photometric Method First Edition
ISO
ISO
ISO
ISO
3256
3257
3258
3260
ISO
ISO
3262-1
3262-2
Aluminium and Aluminium Alloys - Determination of Magnesium - Atomic Absorption Spectrophotometric Method First Edition
Rubber Compounding Ingredients - Carbon Black - Method of Evaluation in Styrene-Butadiene Rubbers Third Edition
Air Distribution and Air Diffusion - Vocabulary First Edition
Pulps - Determination of Chlorine Consumption (Degree of Delignification) Second Edition
Extenders for Paints - Specifications and Methods of Test - Part 1: Introduction and General Test Methods First Edition; Replaces
ISO 3262:1975
Extenders for Paints - Specifications and Methods of Test - Part 2: Barytes (Natural Barium Sulfate) First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3262-3
3262-4
3262-5
3262-6
3262-7
3262-8
3262-9
3262-10
Extenders for Paints - Specifications and Methods of Test - Part 3: Blanc Fixe First Edition
Extenders for Paints - Specifications and Methods of Test - Part 4: Whiting First Edition
Extenders for Paints - Specifications and Methods of Test - Part 5: Natural Crystalline Calcium Carbonate First Edition
Extenders for Paints - Specifications and Methods of Test - Part 6: Precipitated Calcium Carbonate First Edition
Extenders for Paints - Specifications and Methods of Test - Part 7: Dolomite First Edition
Extenders for Paints - Specifications and Methods of Test - Part 8: Natural Clay First Edition
Extenders for Paints - Specifications and Methods of Test - Part 9: Calcined Clay First Edition; Replaces 3262:1975
Extenders for Paints - Specificstions and Methods of Test - Part 10: Natural Talc/Chlorite in Lamellar Form First Edition
Extenders for Paints - Specificstions and Methods of Test - Part 11: Natural Talc, in Lamellar Form, Containing Carbonates First
Edition
Extenders for Paints - Specificstions and Methods of Test - Part 12: Muscovite-Type Mica First Edition
ISO
ISO
3262-11
3262-12
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3262-13
3262-14
3262-15
3262-16
3262-17
3262-18
3262-19
3262-20
3262-21
ISO
3262-22
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3265
3266
3267
3269
3270
3271
3272-1
ISO
3272-2
Extenders for Paints - Specifications and Methods of Test - Part 13: Natural Quartz (Ground) First Edition; Replaces ISO 3262:1975
Extenders for Paints - Specifiations and Methods of Test - Part 14: Cristobalite First Edition
Extenders for Paints - Specifications and Methods of Test - Part 15: Vitreous Silica First Edition; Replaces ISO 3262:1975
Extenders for Paints - Specifications and Methods of Test - Part 16: Aluminum Hydroxides First Edition
Extenders for Paints - Specifications and Methods of Test - Part 17: Precipitated Calcium Silicate First Edition
Extenders for Paints - Specifications and Methods of Test - Part 18: Precipitated Sodium Aluminium Silicate First Edition
Extenders for Paints - Specifications and Methods of Test - Part 19: Precipitated Silica First Edition
Extenders for Paints - Specifications and Methods of Test - Part 20: Fumed Silica First Edition
Extenders for Paints - Specifications and Methods of Test - Part 21: Silica Sand (Unground Natural Quartz ) First Edition
Extenders for Paints - Specifications and Methods of Test - Part 22: Flex-Calcined Kieselguhr First Edition; Together with ISO 3262
Parts 1-21, Supersedes ISO 3262:1975
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Wagon Tipplers Handling Rail-Borne Wagons (Rotary, Side
Discharge and End Discharge) - Safety Code First Edition
Eyebolts for General Lifting Purposes First Edition
Road Vehicles - Headlamp Cleaners Second Edition
Fasteners - Acceptance Inspection Third Edition
Paints and Varnishes and Their Raw Materials - Temperatures and Humidities for Conditioning and Testing Third Edition
Iron Ores - Determination of Tumble Strength Third Edition
Microfilming of Technical Drawings and Other Drawing Office Documents - Part 1: Operating Procedures Second Edition
Microfilming of Technical Drawings and Other Drawing Office Documents - Part 2: Quality Criteria and Control of 35 mm Silver
Gelatin Microfilms Second Edition
ISO
3272-3
Microfilming of Technical Drawings and Other Drawing Office Documents - Part 3: Aperture Card for 35 mm Microfilm Second Edition
ISO
3272-4
ISO
3274
ISO
ISO
3275
3282
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3284
3285
3286
3287
3290
3291
3292
3293
3294
3295
3297
3298
3299
3301
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3302-1
3302-2
3303
3304
3305
3306
3308
ISO
ISO
ISO
ISO
ISO
6330-99
3310-2
3310-3
3312
3314
Microfilming of Technical Drawings and Other Drawing Office Documents - Part 4: Microfilming of Drawings of Special and
Exceptional Elongated Sizes First Edition
Geometrical Products Specifications (GPS) - Surface Texture: Profile Method - Nominal Characteristics of Contact (Stylus)
Instruments Second Edition; Technical Corrigendum 1-1998
Information Processing - Implementation of the 7-Bit Coded Character Set and Its 7-Bit and 8-Bit Extensions on 3,81 mm Magnetic
Tape Cassette for Data Interchange First Edition
Aircraft - Dimensions for Single-Hole and Triple-Hole Mounting (Class 3) Lever-Operated Manual Switches First Edition
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Dimensions of Bends for Use in Pneumatic Handling First
Edition
Road Vehicles - Ignition Coil Mounting Brackets Second Edition
Single Point Cutting Tools - Corner Radii First Edition
Powered Industrial Trucks - Symbols for Operator Controls and Other Displays Second Edition
Rolling Bearings - Balls - Dimensions and Tolerances Third Edition [Replaced: ABMA 3290]
Extra-Long Morse Taper Shank Twist Drills Second Edition
Extra Long Parallel Shank Twist Drills Second Edition
Morse Taper Shank Countersinks for Angles 60 Degrees, 90 Degrees and 120 Degrees Inclusive First Edition
Parallel Shank Countersinks for Angles 60 Degrees, 90 Degrees and 120 Degrees Inclusive First Edition
Narrow Bandsaw Blades for Woodworking - Dimensions First Edition
Information and Documentation - International Standard Serial Number (ISSN) Fourth Edition
Photography - Processing Chemicals - Specifications for Glacial Acetic Acid Second Edition
Photography - Processing Chemicals - Specifications for 1-Phenyl-3- Pyrazolidinone Second Edition
Statistical Interpretation of Data - Comparison of Two Means in the Case of Paired Observations First Edition
Rubber - Tolerances for Products - Part 1: Dimensional Tolerances First Edition; Cancels and Replaces 3302: 1990; Amendment
1:06-01-2001
Rubber - Tolerances for Products - Part 2: Geometrical Tolerances First Edition
Rubber- or Plastics-Coated Fabrics - Determination of Bursting Strength Second Edition
Plain End Seamless Precision Steel Tubes - Technical Conditions for Delivery Second Edition
Plain End Welded Precision Steel Tubes - Technical Conditions for Delivery Second Edition
Plain End As-Welded and Sized Precision Steel Tubes - Technical Conditions for Delivery Second Edition
Routine Analytical Cigarette-Smoking Machine - Definitions and Standard Conditions Fourth Edition
Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth Fourth Edition; Technical Corrigendum
1:9/1/2004
Test Sieves - Technical Requirements and Testing - Part 2: Test Sieves of Perforated Metal Plate Fourth Edition
Test Sieves - Technical Requirements and Testing - Part 3: Test Sieves of Electroformed Sheets First Edition
Sintered Metal Materials and Hardmetals - Determination of Young Modulus Second Edition; (CEN EN 23312: 1993)
Shell Drills with Taper Bore (Taper Bore 1 : 30 (Included)) with Slot Drive First Edition
ISO
3315
ISO
ISO
3316
3317
ISO
ISO
ISO
ISO
ISO
ISO
3318
3320
3321
3323
3324-1
3324-2
ISO
ISO
ISO
3325
3326
3327
ISO
ISO
ISO
ISO
ISO
ISO
3332
3334
3337
3338-1
3338-2
3338-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3339-0
3340
3341
3342
3343
3344
3345
3346
3347
3348
3349
3350
Assembly Tools for Screws and Nuts - Driving Parts for Hand-Operated Square Drive Socket Wrenches - Dimensions and Tests
Third Edition
Assembly Tools for Screws and Nuts - Attachments for Hand-Operated Square Drive Socket Wrenches - Dimensions and Tests
Third Edition
Assembly Tools for Screws and Nuts - Square Drive Extension Hexagon Insert, for Power Socket Wrenches First Edition
Assembly Tools for Screws and Nuts - Double-Headed Open-Ended Wrenches, Double-Headed Ring Wrenches and Combination
Wrenches - Maximum Widths of Heads Third Edition
Fluid Power Systems and Components - Cylinder Bores and Piston Rod Diameters - Metric Series Second Edition
Fluid Power Systems and Components - Cylinder Bores and Piston Rod Diameters - Inch Series First Edition
Aircraft - Hydraulic Components - Marking to Indicate Fluid for Which Component is Approved Second Edition
Aircraft Tyres and Rims - Part 1: Specifications Fourth Edition; Corrected and Reprinted 09/15/1998
Aircraft Tyres and Rims - Part 2: Test Methods for Tyres Second Edition; Corrected and Reprinted 02/01/1999
Sintered Metal Materials, Excluding Hardmetals - Determination of Transverse Rupture Strength Second Edition; Amendment 1
02/01/2001
Hardmetals - Determination of (the Magnetization) Coercivity First Edition; (CEN EN 23326: 1993)
Hardmetals - Determination of Transverse Rupture Strength Second Edition; (CEN EN 23327: 1993)
Ammonium Sulphate for Industrial Use - Determination of Ammoniacal Nitrogen Content - Titrimetric Method After Distillation First
Edition
Micrographics ISO resolution test chart No. 2 Description and use Third Edition
T-Slot Cutters with Cylindrical Shanks and with Morse Taper Shanks Having Tapped Hole
Cylindrical Shanks for Milling Cutters - Part 1: Dimensional Characteristics of Plain Cylindrical Shanks Fourth Edition
Cylindrical shanks for milling cutters ù Part 2: Dimensional characteristics of flatted cylindrical shanks Sixth edition
Cylindrical Shanks for Milling Cutters - Part 3: Dimensional Characteristics of Threaded Shanks First Edition
Tractors and Machinery for Agriculture and Forestry - Classification and Terminology - Part 0: Classification System and
Classification Second Edition
Fibre Building Boards - Determination of Sand Content First Edition
Textile Glass - Yarns - Determination of Breaking Force and Breaking Elongation Third Edition
Textile Glass - Mats - Determination of Tensile Breaking Force Third Edition
Textile Glass - Yarns - Determination of Twist Balance Index Second Edition
Reinforcement Products - Determination of Moisture Content Second Edition
Wood - Determination of Ultimate Tensile Stress Parallel to Grain First Edition
Wood - Determination of Ultimate Tensile Stress Perpendicular to Grain First Edition
Wood - Determination of Ultimate Shearing Stress Parallel to Grain First Edition; (PNS 970: 1989)
Wood - Determination of Impact Bending Strength First Edition
Wood - Determination of Modulus of Elasticity in Static Bending First Edition; (PNS 971: 1989)
Wood - Determination of Static Hardness First Edition
ISO
ISO
ISO
3351
3353-1
3353-2
Wood - Determination of Resistance to Impact Indentation First Edition
Aerospace - Lead and Runout Threads - Part 1: Rolled External Threads First Edition; Replaces ISO 3353
Aerospace - Lead and Runout Threads - Part 2: Internal Threads First Edition; Replaces ISO 3353
Milk and Dried Milk, Buttermilk and Buttermilk Powder, Whey and Whey Powder - Determination of Phosphatase Activity (Reference
Method) First Edition
Sodium Tripolyphosphate and Sodium Pyrophosphate for Industrial Use - Determination of Total Phosphorus (V) Oxide Content Quinoline Phosphomolybdate Gravimetric Method First Edition
Phosphoric Acid and Sodium Phosphates for Industrial Use (Including Foodstuffs) - Determination of Fluorine Content - Alizarin
Complexone and Lanthanum Nitrate Photometric Method First Edition
Fluorochlorinated Hydrocarbons for Industrial Use - Determination of Acidity - Titrimetric Method First Edition
Indexable Hardmetal (Carbide) Inserts with Rounded Corners, with Cylindrical Fixing Hole - Dimensions Third Edition
Indexable Hardmetal (Carbide) Inserts with Wiper Edges, without Fixing Hole - Dimensions Second Edition
Coated Abrasives - Abrasive Rolls Second Edition
Impermeable sintered metal materials and hardmetals Determination of density Second Edition
Modular Units for Machine Tool Construction - Rotary Tables and Multi-Sided Centre Bases for Rotary Tables First Edition
Reinforcement Products - Mats and Fabrics - Determination of Mass per Unit Area Third Edition
Textile Glass - Determination of Stiffness of Rovings First Edition
ISO
3356
ISO
3357
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3360
3363
3364
3365
3366
3369
3371
3374
3375
ISO
ISO
ISO
3376
3377-1
3377-2
ISO
ISO
3378
3379
Leather Physical and mechanical tests Determination of tensile strength and percentage extension Second Edition; IULTCS/IUP 6
Leather Physical and mechanical tests Determination of tear load part 1: Single edge tear First Edition; IULTCS/IUP 40
Leather Physical and mechanical tests Determination of tear load Part 2: Double edge tear First Edition; IULTCS/IUP 8
Leather Physical and mechanical tests Determination of resistance to grain cracking and grain crack index Second Edition;
IULTCS/IUP 12
Leather - Determination of Distension and Strength of Grain - Ball Burst Test First Edition; (PNS 976: 1986)
ISO
ISO
3380
3381
Leather Physical and mechanical tests Determination of shrinkage temperature up to 100 C Second Edition; IULTCS/IUP 16
Railway applications Acoustics Measurement of noise inside railbound vehicles Second Edition
ISO
3382
ISO
3384
Acoustics - Measurement of the Reverberation Time of Rooms with Reference to other Acoustical Parameters Second Edition
Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
Fifth Edition
ISO
3385
ISO
3386-1
Flexible Cellular Polymeric Materials - Determination of Fatigue by Constant-Load Pounding Third Edition; (CEN EN ISO 3385: 1995)
Polymeric Materials, Cellular Flexible - Determination of Stress-Strain Characteristic in Compression - Part 1: Low-Density Materials
Second Edition
ISO
3386-2
ISO
ISO
3387
3389
ISO
ISO
3390
3391
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3393
3394
3397
3398
3399
3400
3401
3402
3405
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3407
3408-1
3408-2
3408-3
3408-4
3408-5
3409
3410
3411
3412
ISO
3415
ISO
ISO
ISO
ISO
3416
3417
3419
3423
Flexible Cellular Polymeric Materials - Determination of Stress-Strain Characteristics in Compression - Part 2: High-Density Materials
Second Edition
Rubber - Determination of Crystallization Effects by Hardness Measurements Second Edition; Technical Corrigendum 1: 2000
Aircraft - Radio Frequency Flexible Coaxial Cables - Dimensions and Electrical Characteristics First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Manganese Content - Flame Atomic Absorption
Method First Edition
Cryolite, Natural and Artificial - Determination of Calcium Content - Flame Atomic Absorption Method First Edition
Cryolite, Natural and Artificial, and Aluminium Fluoride for Industrial Use - Determination of Moisture Content - Gravimetric Method
First Edition
Dimensions of Rigid Rectangular Packages - Transport Packages Second Edition
Broadleaved Wood Raw Parquet Blocks - General Characteristics First Edition
Broadleaved Wood Raw Parquet Blocks - Classification of Oak Parquet Blocks First Edition
Broadleaved Wood Raw Parquet Blocks - Classification of Beech Parquet Blocks First Edition
Cigarettes - Determination of Alkaloids in Smoke Condensates - Spectrometric Method Third Edition
Cigarettes - Determination of Alkaloid Retention by the Filters - Spectrometric Method Second Edition
Tobacco and Tobacco Products - Atmosphere for Conditioning and Testing Fourth Edition
Petroleum Products - Determination of Distillation Characteristics at Atmospheric Pressure Third Edition
Information Processing - Information Interchange on 3,81 mm (0.150 in) Magnetic Tape Cassette at 4 cpmm (100 cpi), Phase
Encoded at 63 ftpmm (1 600 ftpi) Second Edition
Ball screws Part 1: Vocabulary and designation Vis Ó billes Partie 1: Vocabulaire et dÚsignation Second Edition
Ball Screws - Part 2: Nominal Diameters and Nominal Leads - Metric Series First Edition;
Ball screws Part 3: Acceptance conditions and acceptance tests Second Edition
Ball screws Part 4: Static axial rigidity First Edition
Ball screws Part 5: Static and dynamic axial load ratings and operational life First Edition
Passenger Cars - Lateral Spacing of Foot Controls First Edition
Agricultural Machinery - Endless Variable-Speed V-Belts and Groove Sections of Corresponding Pulleys Second Edition
Earth-moving machinery ù Physical dimensions of operators and minimum operator space envelope Fourth Edition
Road Vehicles - Screened and Waterproof Spark- Plugs and Their Connections - Types 1A and 1B Third Edition
Textile Floor Coverings - Determination of Thickness Loss After Brief, Moderate Static Loading Second Edition (AS/NZS 2111.13:
1996)
Textile Floor Coverings - Determination of Thickness Loss After Prolonged, Heavy Static Loading Second Edition (AS/NZS 2111.14:
1996) [Superseded By: JSA JIS L 1021-6]
Rubber - Measurement of Vulcanization Characteristics with the Oscillating Disc Curemeter Second Edition
Non-Alloy and Alloy Steel Butt-Welding Fittings Second Edition; (Erratum-1982)
Sulphuric Acid and Oleums for Industrial Use - Determination of Sulphur Dioxide Content - Iodometric Method First Edition
ISO
ISO
ISO
ISO
3425
3426
3427
3428
ISO
3429
ISO
3430
ISO
ISO
ISO
3431
3432
3433
ISO
ISO
ISO
ISO
3434
3435
3438
3439
ISO
3442-1
ISO
3442-2
ISO
ISO
3442-3
3443-1
ISO
ISO
3443-2
3443-3
Sulphur for Industrial Use - Determination of Ash at 850-900 Degrees Celsius and of Residue at 200 Degrees Celsius First Edition
Sulphur for Industrial Use-Determination of Loss in Mass at 80 Degree Celsius First Edition
Gaseous Halogenated Hydrocarbons (Liquefied Gases) - Taking of a Sample First Edition
Sodium Fluoride for Industrial Use - Preparation and Storage of Test Samples First Edition
Sodium Fluoride Primarily Used for the Production of Aluminium - Determination of Iron Content - 1,10- 1,10-Phenanthroline
Photometric Method First Edition
Sodium Fluoride Primarily Used for the Production of Aluminium - Determination of Silica Content - Reduced Molybdosilicate
Spectrophotometric Method First Edition
Sodium Fluoride Primarily Used for the Production of Aluminium - Determination of Soluble Sulphates Content - Turbidimetric Method
First Edition
Cheese - Determination of Fat Content - Butyrometer for Van Gulik Method First Edition
Cheese - Determination of Fat Content - Van Gulik Method First Edition
Shipbuilding and Marine Structures - Heated Glass Panes for Ships Rectangular Windows Second Edition; Amendment 1:
7/01/2004
Continuous Mechanical Handling Equipment - Classification and Symbolization of Bulk Materials First Edition
Subland Twist Drills with Morse Taper Shanks for Holes Prior to Tapping Screw Threads Second Edition
Subland Twist Drills with Cylindrical Shanks for Holes Prior to Tapping Screw Threads Second Edition
Machine tools Dimensions and geometric tests for self-centring chucks with two-piece jaws Part 1: Manually operated chucks with
tongue and groove type jaws First Edition; Replaces ISO 3442 and ISO 9401
Machine tools Dimensions and geometric tests for self-centring chucks with two-piece jaws Part 2: Power-operated chucks with
tongue and groove type jaws First Edition; Replaces ISO 3442 and ISO 9401
Machine tools ù Dimensions and geometric tests for self-centring chucks with two-piece jaws ù Part 3: Power-operated chucks with
serrated jaws First Edition [Replaced: ISO 3442, ISO 9401]
Tolerances for Building - Part 1: Basic Principles for Evaluation and Specification First Edition
Tolerances for Building - Part II: Statistical Basis for Predicting Fit Between Components Having a Normal Distribution of Sizes First
Edition
Tolerances for Building - Part 3: Procedures for Selecting Target Size and Predicting Fit First Edition
ISO
3443-4
Tolerances for Building - Part 4: Method for Predicting Deviations of Assemblies and for Allocation of Tolerances First Edition
ISO
3443-5
ISO
3443-6
ISO
3443-7
Building Construction - Tolerances for Building - Part 5: Series of Values to Be Used for Specification of Tolerances First Edition
Tolerances for Building - Part 6: General Principles for Approval Criteria, Control of Conformity with Dimensional Tolerance
Specifications and Statistical Control - Method 1 First Edition
Tolerances for Building - Part 7: General Principles for Approval Criteria, Control of Conformity with Dimensional Tolerance
Specifications and Statistical Control - Method 2 (Statistical Control Method) First Edition
ISO
ISO
ISO
ISO
3443-8
3447
3448
3449
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3450
3451-1
3451-2
3451-3
3451-4
3451-5
3452
3452-2
ISO
3452-3
ISO
ISO
ISO
ISO
ISO
ISO
3452-4
3453
3454
3455
3456
3457
ISO
3458
ISO
3459
ISO
3460
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3463
3465
3466
3467
3468
3469
3470
Tolerances for Building - Part 8: Dimensional Inspection and Control of Construction Work First Edition
Joints in Building - General Check-List of Joint Functions First Edition
Industrial Liquid Lubricants - ISO Viscosity Classification Second Edition
Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements Fifth Edition
Earth-Moving Machinery - Braking Systems of Rubber-Tyred Machines - Systems and Performance Requirements and Test
Procedures Third Edition
Plastics - Determination of Ash - Part 1: General Methods Third Edition
Plastics - Determination of Ash - Part 2: Poly(Alkylene Terephthalate) Materials Second Edition
Plastics - Determination of Ash - Part 3: Unplasticized Cellulose Acetate First Edition
Plastics - Determination of Ash - Part 4: Polyamides Second Edition
Plastics - Determination of Ash - Part 5: Poly(Vinyl Chloride) Second Edition
Non-Destructive Testing - Penetrant Inspection - General Principles First Edition
Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Second Edition;
Non-Destructive Testing - Penetrant Testing - Part 3: Reference Test Blocks First Edition; Together with ISO 3452-1, ISO 3452-2 and
ISO 3452-4 Cancels and Replaces ISO 3452:1984
Non-Destructive Testing - Penetrant Testing - Part 4: Equipment First Edition; Together with ISO 3452-1, ISO 3452-2 and ISO 3452-3
Cancels and Replaces ISO 3452:1984
Non-Destructive Testing - Liquid Penetrant Inspection - Means of Verification First Edition
Liquid Flow Measurement in Open Channels - Direct Depth Sounding and Suspension Equipment Second Edition
Hydrometry ù Calibration of currentmeters in straight open tanks Second Edition
Aircraft - Lever-Operated Manual Switches (Class 3) - Performance Requirements First Edition
Earth-Moving Machinery - Guards - Definitions and Requirements Fourth Edition
Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes - Test of Leakproofness Under Internal Pressure First
Edition
Polyethylene (PE) Pressure Pipes - Joints Assembled with Mechanical Fittings - Internal Under-Pressure Test Method and
Requirement First Edition
Unplasticized Polyvinyl Chloride (PVC) Pressure Pipes - Metric Series - Dimensions of Adapter for Backing Flange First Edition
Tractors for agriculture and forestry ù Roll-over protective structures (ROPS) ù Dynamic test method and acceptance conditions
Fourth edition
Hand Taper Pin Reamers First Edition
Machine Taper Pin Reamers with Parallel Shanks First Edition
Machine Taper Pin Reamers with Morse Taper Shanks First Edition
Passenger Cars - Windscreen Defrosting Systems - Test Method Second Edition
Passenger Cars - Windscreen Washing Systems - Test Methods Second Edition; Amendment 1: 07/15/2006
Passenger Cars - Windscreen Demisting Systems - Test Method Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3471
3475
3476
3493
3494
3496
3497
3500
3501
ISO
3503
ISO
ISO
ISO
3505
3506-1
3506-2
ISO
ISO
ISO
ISO
ISO
3506-3
3506-4
3507
3508
3509
ISO
3511-I
ISO
3511-2
ISO
3511-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3511-4
3512
3513
3514
3515 CORR 1
3515
3516
Earth-Moving Machinery - Roll-Over Protective Structures - Laboratory Tests and Performance Requirements First Edition;
Amendment 1-1997; Technical Corrigendum 1 12/01/2000
Oil of Aniseed (Pimpinella Anisum L.) Second Edition
Modular Units for Machine Tool Construction - Tenon Drive and Flanges for Mounting Multi-Spindle Heads First Edition
Vanilla - Vocabulary Vanille - Vocabulaire Second Edition
Statistical Interpretation of Data - Power of Tests Relating to Means and Variances First Edition
Meat and Meat Products - Determination of Hydroxyproline Content Second Edition
Metallic Coatings - Measurement of Coating Thickness - X-Ray Spectrometric Methods Third Edition
Gas cylinders Seamless steel CO2 cylinders for fixed fire-fighting installations on ships Third Edition
Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes - Test of Resistance to Pull out First Edition
Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes - Test of Leakproofness Under Internal Pressure When
Subjected to Bending First Edition
Ropes and Cordage - Equivalence Between Natural Fibre Ropes and Man-Made Fibre Ropes for Use in the Mooring of Vessels First
Edition
Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 1: Bolts, Screws and Studs First Edition
Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 2: Nuts First Edition
Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 3: Set Screws and Similar Fasteners Not Under
Tensile Stress First Edition
Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 4: Tapping Screws First Edition
Laboratory Glassware - Pyknometers Second Edition
Thread Run-Outs for Fasteners with Thread in Accordance with ISO 261 and ISO 262 First Edition
Coffee and coffee products Vocabulary CafÚs et dÚrivÚs Vocabulaire Fourth Edition
Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part I: Basic Requirements First Edition
Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic Requirements
First Edition
Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument
Interconnection Diagrams First Edition
Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols for
Process Computer, Interface, and Shared Display/Control Functions First Edition
Heavy-Duty Cranked-Link Transmission Chains Second Edition
Chillies - Determination of Scoville Index Second Edition
Chlorinated Polyvinyl Chloride (CPVC) Pipes and Fittings - Specification and Determination of Density First Edition
Oil of Lavender (Lavandula Angustifolia Mill.) TECHNICAL CORRIGENDUM 1 Third Edition
Oil of Lavender (Lavandula Angustifolia Mill.) Third Edition
Oil of Coriander Fruits (Coriandrum Sativum L.) Second Edition
ISO
ISO
ISO
3517
3518
3519
ISO
3520
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3521
3522
3523
3524
3525
3526
3527
3528
3529-1
3529-2
3529-3
3530
3534-1
ISO
3534-2
ISO
ISO
3534-3
3535
ISO
ISO
ISO
3536
3537
3538
ISO
ISO
3539
3540
ISO
3543
ISO
ISO
3545-1
3545-2
Oil of Neroli (Citrus Aurantium L. ssp. Aurantium syn. Citrus Aurantium L. ssp. Amara var. Pumilia) Second Edition
Oil of Sandalwood (Santalum album L.) Second Edition
Oil of lime distilled, Mexican type [Citrus aurantifolia (Christm.) Swingle] Third Edition
Oil of Bergamot [Citrus Aurantium L. Subsp. Bergamia (Wight et Arnott) Engler], Italian Type Second Edition; Corrigendum 1:
1/15/2002
Plastics - Unsaturated Polyester and Epoxy Resins - Determination of Overall Volume Shrinkage Second Edition; Technical
Corrigendum 1: 2/15/2003
Aluminium and aluminium alloys Castings - Chemical composition and mechanical properties Third Edition
Oil of Cananga [Cananga Odorata (Lam.) Hook. F. Et Thomson, Forma Macrophylla] Second Edition
Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume) Second Edition
Oil of Amyris First Edition
Oil of sage, Spanish (Salvia lavandulifolia Vahl) Third Edition
Oil of Parsley Fruits (Petroselinum Sativum Hoffm.) Second Edition
Oil of Mandarin, Italian Type (Citrus Reticulata Blanco) Second Edition; Corrigendum 1-1998
Vacuum Technology - Vocabulary - Part 1: General Terms First Edition
Vacuum Technology - Vocabulary - Part 2: Vacuum Pumps and Related Terms First Edition
Vacuum Technology - Vocabulary - Part 3: Vacuum Gauges First Edition
Vacuum Technology - Mass Spectrometer-Type Leak-Detector Calibration First Edition
Statistics Vocabulary and symbols Part 1: General statistical terms and terms used in probability Second Edition
Statistics Vocabulary and symbols Part 2: Applied statistics Statistique Vocabulaire et symboles Partie 2: Statistique appliquÚe
Second Edition
Statistics - Vocabulary and Symbols - Part 3: Design of Experiments Statistique - Vocabulaire Et Symboles - Partie 3: Plans
D'Experience Second Edition
Forms Design Sheet and Layout Chart First Edition
Road Vehicles - Safety Glazing Materials - Vocabulary Vehicules Routiers - Vitrages De Securite - Vocabulaire Second Edition
Road Vehicles - Safety Glazing Materials - Mechanical Tests Third Edition
Road Vehicles - Safety Glazing Materials - Test Methods for Optical Properties Second Edition
Road Vehicles - Injection Nozzle Holder with Body, Types 8 and 10, and Injection Nozzle Holder with Fixing Flats, Types 9 and 11
First Edition
Paper or Plastic Printing Ribbons - Characteristics of Cores First Edition
Metallic and Non-Metallic Coatings - Measurement of Thickness - Beta Backscatter Method Second Edition; TECHNICAL
CORRIGENDUM 1: 12/01/2003
Steel Tubes and Fittings - Symbols for Use in Specifications - Part 1: Tubes and Tubular Accessories with Circular Cross-Section
First Edition
Steel Tubes and Fittings - Symbols for Use in Specifications - Part 2: Square and Rectangular Hollow Sections First Edition
ISO
ISO
ISO
ISO
ISO
ISO
3545-3
3546
3547-1
3547-2
3547-3
3547-4
ISO
ISO
3548
3549
ISO
3550-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3550-2
3551-1
3551-2
3552-1
3552-2
3553-1
3553-2
3559
3560
3561
ISO
ISO
ISO
3562
3563
3564
ISO
ISO
ISO
ISO
ISO
ISO
3566
3569
3572
3573
3574
3575
ISO
3580
Steel Tubes and Fittings - Symbols for Use in Specifications - Part 3: Tubular Fittings with Circular Cross-Section First Edition
Fibre Building Boards - Determination of Surface Finish (Roughness) First Edition
Plain bearings Wrapped bushes Part 1: Dimensions Second Edition
Plain bearings Wrapped bushes Part 2: Test data for outside and inside diameters Second Edition
Plain bearings Wrapped bushes Part 3: Lubrication holes, grooves and indentations Second Edition
Plain Bearings - Wrapped Bushes - Part 4: Materials Second Edition
Plain Bearings - Thin-Walled Half Bearings with or without Flange - Tolerances, Design Features and Methods of Test Second
Edition
Zinc Dust Pigments for Paints - Specifications and Test Methods Second Edition
Cigarettes - Determination of Loss of Tobacco from the Ends - Part 1: Method Using a Rotating Cylindrical Cage First Edition
Cigarettes - Determination of Loss of Tobacco from the Ends - Part 2: Method Using a Rotating Cubic Box (Sismelatophore) First
Edition
Rotary Core Diamond Drilling Equipment - System A - Part 1: Metric Units First Edition
Rotary Core Diamond Drilling Equipment - System A - Part 2: Inch Units First Edition
Rotary Core Diamond Drilling Equipment - System B - Part 1: Metric Units First Edition
Rotary Core Diamond Drilling Equipment - System B - Part 2: Inch Units First Edition
Road Vehicles - High-Tension Connections for Ignition Coils and Distributors - Part 1: Socket-Type First Edition
Road Vehicles - High-Tension Connectors for Ignition Coils and Distributors - Part 2: Plug-Type Second Edition
Road Vehicles - Working Voltages for Lights Fitted to Motor Vehicles and to Their Trailers First Edition
Road Vehicles - Frontal Fixed Barrier or Pole Impact Test Procedure Second Edition
Information Processing - Interchangeable Magnetic Six-Disk Pack - Track Format First Edition
Information Processing - Interchangeable Magnetic Single Disk Cartridge (Top Loaded) - Physical and Magnetic Characteristics First
Edition
Information Processing - Interchangeable Magnetic Single-Disk Cartridge (Top Loaded) - Track Format First Edition
Information Processing - Interchangeable Magnetic Eleven-Disk Pack - Physical and Magnetic Characteristics First Edition
Sodium Fluoride Primarily Used for the Production of Aluminium - Determination of Chlorides Content - Turbidimetric Method First
Edition
Continuous Mechanical Handling Equipment - Classification of Unit Loads First Edition
Textiles - Weaves - Definitions of General Terms and Basic Weaves First Edition
Hot-Rolled Carbon Steel Sheet of Commercial and Drawing Qualities Third Edition
Cold-Reduced Carbon Steel Sheet of Commercial and Drawing Qualities Third Edition
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities Third Edition
Covered Electrodes for Manual Arc Welding of Welding consumables Covered electrodes for manual metal arc welding of creepresisting steels Classification Second Edition
ISO
3581
ISO
3582 AMD 1
ISO
ISO
ISO
ISO
ISO
3582
3583
3584
3585
3586
ISO
3587
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3588
3589
3590
3591
3593
3594
3595
ISO
3596
ISO
18609
ISO
3597-1
ISO
3597-2
ISO
3597-3
ISO
ISO
ISO
3597-4
3598
3599
ISO
3600
Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of Stainless and Heat-Resisting Steels - Classification
Second Edition
Flexible cellular polymeric materials ù Laboratory assessment of horizontal burning characteristics of small specimens subjected to a
small flame AMENDMENT 1 Second Edition
Flexible Cellular Polymeric Materials - Laboratory Assessment of Horizontal Burning Characteristics of Small Specimens Subjected to
a Small Flame Second Edition
Road Vehicles - Pressure Test Connection for Compressed-Air Pneumatic Braking Equipment Third Edition
Road Vehicles - Drawbar Couplings - Interchangeability Second Edition
Borosilicate Glass 3.3 - Properties Third Edition
Glass Plant, Pipeline and Fittings - General Rules for Testing, Handling and Use First Edition
Glass Plant, Pipeline and Fittings - Pipeline and Fittings of Nominal Bore 15 to 150 mm - Compatibility and Interchangeability First
Edition; (Erratum-1979)
Spices and Condiments - Determination of Degree of Fineness of Grinding - Hand Sieving Method (Reference Method) First Edition
Modular Units for Machine Tool Construction - Integral Way Columns First Edition; Amendment 1: 1982
Modular units for machine tool construction - Spindle Units First Edition
Sensory Analysis - Apparatus - Wine-Tasting Glass First Edition
Starch - Determination of Ash Second Edition; (CEN EN ISO 3593: 1981)
Milk Fat - Detection of Vegetable Fat by Gas-Liquid Chromatography of Sterols (Reference Method) First Edition
Milk Fat - Detection of Vegetable Fat by the Phytosteryl Acetate Test First Edition
Animal and Vegetable Fats and Oils - Determination of Unsaponifiable Matter - Method Using Diethyl Ether Extraction First Edition;
Cancels and Replaces ISO 3596-1:1988 and its Amendment 1:1997
Animal and Vegetable Fats and Oils - Determination of Unsaponifiable Matter - Method Using Hexane Extraction First Edition
[Superseded: ISO 3596-2]
Textile-Glass-Reinforced Plastics - Determination of Mechanical Properties on Rods Made of Roving-Reinforced Resin - Part 1:
General Considerations and Preparation of Rods Second Edition
Textile-Glass-Reinforced Plastics - Determination of Mechanical Properties on Rods Made of Roving-Reinforced Resin - Part 2:
Determination of Flexural Strength Second Edition
Textile-Glass-Reinforced Plastics - Determination of Mechanical Properties on Rods Made of Roving-Reinforced Resin - Part 3:
Determination of Compressive Strength Second Edition
Textile-Glass-Reinforced Plastics - Determination of Mechanical Properties on Rods Made of Roving-Reinforced Resin - Part 4:
Determination of Apparent Interlaminar Shear Strength Second Edition
Textile Glass - Yarns - Basis for a Specification Second Edition
Vernier callipers reading to 0,l and 0,05 mm First Edition
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Operator s Manuals - Content and
Presentation Third Edition
ISO
ISO
ISO
ISO
3601-1
3601-3
3601-5
3602
ISO
3603
ISO
ISO
ISO
3604
3610
3611
ISO
3613
ISO
ISO
ISO
ISO
3616
3617
3618
3619
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3620
3621
3622
3623
3624
3625
3626
3627
3628
3629
ISO
ISO
ISO
ISO
3630-1
3630-2
3630-3
3631
ISO
3633
Fluid Power Systems - O-rings - Part 1: Inside Diameters, Cross-Sections, Tolerances and Size Identification Code Third Edition
Fluid power systems O-rings Part 3: Quality acceptance criteria Second Edition
Fluid Power Systems - O-Rings - Part 5: Suitability of Elastomeric Materials for Industrial Applications First Edition
Documentation - Romanization of Japanese (Kana Script) First Edition
Fittings for Unplasticized Polyvinyl Chloride (PVC) Pressure Pipes with Elastic Sealing Ring Type Joints - Pressure Test for
Leakproofness First Edition
Fitting for Unplasticized Polyvinyl Chloride (PVC) Pressure Pipes with Elastic Sealing Ring Type Joints - Pressure Test for
Leakproofness Under Conditions of External Hydraulic Pressure First Edition
Modular units for machine tool construction - Support brackets First Edition
Micrometer Callipers for External Measurement First Edition
Chromate Conversion Coatings on Zinc,Cadmium, Aluminium-Zinc Alloys and Zinc-Aluminium Alloys - Test Methods Second Edition
Textile Glass - Chopped-Strand and Continuous-Filament Mats - Determination of Average Thickness, Thickness Under Load and
Recovery After Compression Second Edition
Photography - Processing Chemicals - Specifications for Sodium Hydroxide Second Edition
Photography - Processing Chemicals - Specifications for Benzotriazole Second Edition
Photography - Processing Chemicals - Specifications for Ammonium Thiosulfate Solution Second Edition
Photography - Processing Chemicals - Specifications for Aluminium Potassium Sulfate Second Edition; (Corrected and Reprinted 1995)
Photography - Processing Chemicals - Specifications for Sodium Tetraborate Decahydrate Second Edition
Photography - Processing Chemicals - Specifications for Ammonium Thiocyanate Second Edition
Photography - Processing Chemicals - Specifications for Anhydrous Potassium Carbonate Second Edition
Photography - Processing Chemicals - Specifications for Potassium Ferricyanide Second Edition
Photography - Processing Chemicals - Specifications for Potassium Hydroxide Second Edition
Photography - Processing Chemicals - Specifications for Potassium Thiocyanate Second Edition
Photography - Processing Chemicals - Specifications for Anhydrous Sodium Metabisulfite Third Edition
Photography - Processing Chemicals - Specifications for Boric Acid, Granular Second Edition
Photography - Processing Chemicals - Specifications for Potassium Metabisulfite Third Edition
Dental Root-Canal Instruments - Part 1: Files, Reamers, Barbed Broaches, Rasps, Paste Carriers, Explorers and Cotton Broaches
First Edition; (CEN EN ISO 3630-1: 1994) (CAN/CSA-Z349.48.2-94)
Dental Root Canal Instruments - Part 2: Enlargers Second Edition
Dental Root-Canal Instruments - Part 3: Condensers, Pluggers and Spreaders First Edition
Citrus Fruits - Guide to Storage First Edition
Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl
Chloride) (PVC-U) Second Edition
ISO
ISO
ISO
ISO
ISO
3634
3635
3636
3637
3638
Vegetable Products - Determination of Chloride Content First Edition
Size Designation of Clothes - Definitions and Body Measurement Procedure Third Edition
Size Designation of Clothes - Men s and Boys Outerwear Garments First Edition; Erratum: 1978; Corrigendum 1: 1990
Size Designation of Clothes - Womens and Girls Outerwear Garments First Edition; Corrigendum 1: 1990
Size Designation of Clothes - Infants Garments First Edition
Cinematography - Projection Reels/Spools 75 to 312 mm Diameter for 8 mm Type S Motion-Picture Film - Dimensions and
Specifications First Edition
Cinematography - Motion-Picture Prints and Sound Records for International Exchange of Television Programmes - Specifications
Second Edition
Cinematography - Motion-Picture Camera Cartridge 8 mm Type S Model II - Cartridge Fit and Take-Up Core Drive - Dimensions and
Specifications First Edition
ISO
3639
ISO
3640
ISO
3641
ISO
ISO
3642
3644
ISO
3645
ISO
ISO
ISO
ISO
ISO
3646
3647
3648
3649
3650
ISO
3651-1
ISO
ISO
ISO
3651-2
3652
3653
ISO
3655
Determination of Resistance to Intergranular Corrosion of Stainless Steels - Part 1: Austenitic and Ferritic-Austenitic (Duplex)
Stainless Steels - Corrosion Test in Nitric Acid Medium by Measurement of Loss in Mass (Huey Test) Second Edition
Determination of Resistance to Intergranular Corrosion of Stainless Steels - Part 2: Ferritic, Austenitic and Ferritic-Austenitic (Duplex)
Stainless Steels - Corrosion Test in Media Containing Sulfuric Acid Second Edition
Shipbuilding - Inland Vessels - Rope Reels First Edition
Cinematography - Spindles for 8 mm Type S Motion-Picture Projector Reels/Spools - Dimensions First Edition
Acceptance Conditions for Vertical Turning and Boring Lathes with One or Two Columns and a Single Fixed or Movable Table General Introduction and Testing of the Accuracy Second Edition
ISO
ISO
ISO
ISO
3656
3657
3659
3660
Animal and Vegetable Fats and Oils - Determination of Ultraviolet Absorbance Expressed as Specific UV Extinction Third Edition
Animal and Vegetable Fats and Oils - Determination of Saponification Value Third Edition
Fruit and Vegetables - Ripening After Cold Storage First Edition
Fishing Nets - Mounting and Joining of Netting - Terms and Illustrations First Edition
Cinematography - Cemented or Welded Splices on 8 mm Type S Motion-Picture Film for Projector Use - Dimensions Second Edition
Cinematography - Spindles for 8 mm Type R Motion-Picture Cameras and Projectors - Dimensions First Edition
Cinematography - Image Area Produced by 8 mm Type S Motion-Picture Camera Aperture and Maximum Projectable Image Area Positions and Dimensions Second Edition
Cinematography - Motion- Picture Camera Cartridge 8 mm Type S Model II - Slots, Projections and Cartridge Hole for Indicating Film
Speed, Colour Balance and Film Identification - Dimensions and Positions First Edition
Cinematography - Spindles for 16 mm Motion-Picture Camera Spools and Projector Reels - Dimensions First Edition
Aviation Fuels - Estimation of Net Specific Energy Second Edition; Corrigendum 1: 1996
Cleaning Equipment for Air or Other Gases - Vocabulary First Edition
Geometrical Product Specifications (GPS) - Length Standards - Gauge Blocks Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3661
3662
3663
3664
3665
3668
3669
3671
3672-1
End-Suction Centrifugal Pumps - Baseplate and Installation Dimensions First Edition; (CEN EN 23661: 1993)
Hydraulic Fluid Power - Pumps and Motors - Geometric Displacements First Edition
Polyethylene (PE) Pressure Pipes and Fittings, Metric Series - Dimensions of Flanges First Edition
Viewing Conditions - Graphic Technology and Photography Second Edition
Photography - Intra-Oral Dental Radiographic Film - Specification Second Edition
Paints and Varnishes - Visual Comparison of the Colour of Paints Second Edition
Vacuum Technology - Bakable Flanges - Dimensions First Edition
Plastics - Aminoplastic Moulding Materials - Determination of Volatile Matter First Edition
Plastics - Unsaturated Polyester Resins (UP-R) - Part 1: Designation System Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3672-2
3673-1
3673-2
3674
3675
3676
3677
3678
3679
3680
3681
3684
3685
ISO
3686-1
ISO
3686-2
Plastics - Unsaturated Polyester Resins (UP-R) - Part 2: Preparation of Test Specimens and Determination of Properties First Edition
Plastics - Epoxy Resins - Part 1: Designation Second Edition
Plastics - Epoxy Resins - Part 2: Preparation of Test Specimens and Determination of Properties Second Edition
Shipbuilding - Inland Vessels - Deck Rail First Edition
Crude Petroleum and Liquid Petroleum Products - Laboratory Determination of Density - Hydrometer Method Third Edition;;
Packaging - Unit Load Sizes - Dimensions First Edition
Filler Metals for Soft Soldering, Brazing and Braze Welding - Designation Second Edition
Paints and Varnishes - Print-Free Test First Edition; (CEN EN ISO 3678: 1995) (PNS 682: 1990)
Determination of flash point Rapid equilibrium closed cup method Third Edition
Determination of flash/no flash Rapid equilibrium closed cup method Fourth Edition
Binders for Paints and Varnishes - Determination of Saponification Value - Titrimetric Method Third Edition
Conveyors Belts - Determination of Minimum Pulley Diameters Second Edition
Tool-Life Testing with Single-Point Turning Tools Second Edition
Test Conditions for High Accuracy Turret and Single Spindle Coorinate Drilling and Boring Machines with Table of Fixed Height with
Vertical Spindle - Testing of the Accuracy - Part 1: Single Column Type Machines First Edition; this First Edition Together with ISO
3686-2 Replaces ISO 3638: 1976
Test Conditions for High Accuracy Turret and Single Spindle Coorinate Drilling and Boring Machines with Table of Fixed Height with
Vertical Spindle - Testing of the Accuracy - Part 2: Portal Type Machines with Moving Table First Edition; this First Edition Together
with ISO 3686-1 Replaces ISO 3638: 1976
ISO
ISO
ISO
ISO
3688
3689
3690
3691
ISO
3692
Pulp - Preparation of Laboratory Sheets for the Measurement of Diffuse Blue Reflectance Factor (ISO Brightness) Second Edition
Paper and Board - Determination of Bursting Strength After Immersion in Water Second Edition
Welding and Allied Processes - Determination of Hydrogen Content in Ferritic Steel Arc Weld Metal Second Edition
Powered Industrial Trucks - Safety Code Second Edition; Amendment 1: 1983
Information Processing - Reels and Cores for 25,4 mm (1 in) Perforated Paper Tape for Information Interchange - Dimensions First
Edition
ISO
ISO
ISO
ISO
3696
3699
3703
3704
Water for Analytical Laboratory Use - Specification and Test Methods First Edition
Anhydrous Hydrogen Fluoride for Industrial Use - Determination of Water Content - Karl Fischer Method First Edition
Acid-Grade and Ceramic-Grade Fluorspar - Determination of Flotation Agents Second Edition
Sulphur for Industrial Use - Determination of Acidity - Titrimetric Method First Edition
ISO
3705
ISO
3706
ISO
3707
ISO
ISO
ISO
ISO
ISO
3711
3713
3714
3715
3715-1
Sulphur for Industrial Use - Determination of Arsenic Content - Silver Diethyldithiocarbamate Photometric Method First Edition
Phosphoric Acid for Industrial Use (Including Foodstuffs) - Determination of Total Phosphorus (V) Oxide Content - Quinoline
Phosphomolybdate Gravimetric Method First Edition; (Erratum-1978)
Phosphoric Acid for Industrial Use (Including Foodstuffs) - Determination of Calcium Content - Flame Atomic Absorption Method First
Edition (PNS 855:1989)
Lead Chromate Pigments and Lead Chromate- Molybdate Pigments - Specifications and Methods of Test Second Edition; (Corrected
and Reprinted - 1991)
Ferroalloys - Sampling and Preparation of Samples - General Rules First Edition
Oil of Pennyroyal First Edition
Shipbuilding - Ship Screw Propellers - List of Equivalent Terms First Edition; Amendment 1: 1986
Ships and Marine Technology - Propulsion Plants for Ships - Part 1: Vocabulary for Geometry of Propellers First Edition
ISO
ISO
3715-2
3719
ISO
3720
ISO
ISO
3722
3723
ISO
ISO
3724
3726
ISO
3727-1
ISO
ISO
ISO
ISO
ISO
3727-2
3727-3
3728
3729
3730
Ships and Marine Technology - Propulsion Plants for Ships - Part 2: Vocabulary for Controllable-Pitch Propeller Plants First Edition
Mechanical Vibration - Symbols for Balancing Machines and Associated Instrumentation Second Edition
Black Tea - Definition and Basic Requirements Third Edition; Technical Corrigendum 1: 2/15/1992; Technical Corrigendum 2:
3/15/2004
Hydraulic Fluid Power - Fluid Sample Containers - Qualifying and Controlling Cleaning Methods First Edition Supersedes NFPA
B93.20M
Hydraulic Fluid Power - Filter Elements - Method for End Load Test First Edition
Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using particulate contaminant Second Edition
Instant Coffee - Determination of Loss in Mass at 70 Degrees Celsius Under Reduced Pressure First Edition
Butter - Determination of Moisture, Not-Fat Solids and Fat Contents - Part 1: Determination of Moisture Content (Reference Method)
First Edition; IDF 80-1; Together With ISO 3727-2 and 3727-3 Cancels and Replaces ISO 3727:1977
Butter - Determination of Moisture, Not-Fat Solids and Fat Contents - Part 2: Determination of Non-Fat Solids Content (Reference
Method) First Edition; IDF 80-1; Together With ISO 3727-2 and 3727-3 Cancels and Replaces ISO 3727:1977
Butter - Determination of Moisture, Non-Fat Solids and Fat Contents - Part 3: Calculation of Fat Content First Edition
Ice-Cream and Milk Ice - Determination of Total Solids Content (Reference Method) Second Edition
Fibre Building Boards - Determination of Surface Stability First Edition
Shipbuilding - Mooring Winches Second Edition; (Corrected and Reprinted - 1989)
ISO
3731
ISO
ISO
ISO
ISO
ISO
ISO
3732
3733
3734
3735
3738-1
3738-2
ISO
3739-1
ISO
ISO
3739-2
3739-3
ISO
3740
ISO
3741
ISO
3743-1
ISO
3743-2
ISO
3744
ISO
3745
ISO
3746
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3747
3750
3754
3755
3756
3757
3758
Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 S (supplementary) for
vehicles with 24 V nominal supply voltage Fourth Edition
Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 12 S (supplementary) for
vehicles with 12 V nominal supply voltage Fourth Edition
Petroleum Products and Bituminous Materials - Determination of Water - Distillation Method Second Edition
Petroleum Products - Determination of Water and Sediment in Residual Fuel Oils - Centrifuge Method Second Edition
Crude Petroleum and Fuel Oils - Determination of Sediment - Extraction Method Second Edition
Hardmetals - Rockwell Hardness Test (Scale A) - Part 1: Test Method First Edition
Hardmetals - Rockwell Hardness Test (Scale A) - Part 2: Preparation and Calibration of Standard Test Blocks First Edition
Industrial tyres and rims ù Part 1: Pneumatic tyres (metric series) on 5 tapered or flat base rims ù Designation, dimensions and
marking Second Edition
Industrial Tyres and Rims - Part 2: Pneumatic Tyres (Metric Series) on 5 Degree Tapered or Flat Base Rims - Load Ratings First
Edition
Industrial Tyres and Rims - Part 3: Rims First Edition
Acoustics - Determination of Sound Power Levels of Noise Sources - Guidelines for the Use of Basic Standards Second Edition
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Precision Methods for Reverberation
Rooms Third Edition; Replaces ISO 3742; 1988; Technical Corrigendum 1:03/01/2001
Acoustics - Determination of Sound Power Levels of Noise Sources - Engineering Methods for Small, Movable Sources in
Reverberant Fields Part 1: Comparison Method for Hard-Walled Test Rooms First Edition; (CEN EN ISO 3743-1: 1995)
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Engineering Methods for Small, Movable
Sources in Reverberant Fields - Part 2: Methods for Special Reverberation Test Rooms First Edition;
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Engineering Method in an Essentially
Free Field over a Reflecting Plane Second Edition; (CEN EN ISO 3744: 1995)
Acoustics Determination of sound power levels of noise sources using sound pressure Precision methods for anechoic and hemianechoic rooms Second Edition
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Survey Method Using an Enveloping
Measurement Surface over a Reflecting Plane (CEN EN ISO 3746: 1995) Second Edition; Corrigendum 1: 1995
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Comparison Method in Situ Second
Edition
Zinc alloys Determination of magnesium content Flame atomic absorption spectrometric method Second Edition
Steel - Determination of Effective Depth of Hardening After Flame or Induction Hardening First Edition
Cast Carbon Steels for General Engineering Purposes Second Edition
Oil of Cubeb First Edition
Oil of patchouli [Pogostemon cablin (Blanco) Benth.] Second Edition
Textiles - Care Labelling Code Using Symbols Second edition
ISO
ISO
3759
3760
ISO
ISO
ISO
ISO
ISO
3761
3763
3764
3765
3766
ISO
3767-1
ISO
3767-2
ISO
3767-3
ISO
3767-4
ISO
ISO
3767-5
3771
ISO
ISO
3772
3773
ISO
3774
ISO
3776-1
ISO
ISO
ISO
ISO
3776-2
3779
3780
3781
ISO
3783
Textiles ù Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
Fourth Edition
Oil of Celery Seed (Apium Graveolens L.) Second Edition
Oil of rosewood, Brazilian type [Aniba rosaeodora Ducke or Aniba parviflora (Meisn.) Mez.] Third edition; Replaces ISO 7353: 1985
Wrought Steels - Macroscopic Methods for Assessing the Content of Non-Metallic Inclusions First Edition
Timekeeping Instruments - Movements - Types, Dimensions and Nomenclature Third Edition
Timekeeping Instruments - Wristwatches - Dimensions of Bracelet-to-Case Fastening Elements Second Edition
Construction Drawings - Simplified Representation of Concrete Reinforcement Third Edition; Replaces ISO 4066
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other
Displays - Part 1: Common Symbols Third Edition
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other
Displays - Part 2: Symbols for Agricultural Tractors and Machinery Second Edition; Amendment 1: 02/15/1995; Amendment 2:
Additional Symbols; 12/15/1998; Amendment 3: 03/15/2000
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other
Displays - Part 3: Symbols for Powered Lawn and Garden Equipment Second Edition CEN EN ISO 3767-3: 1996
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other
Displays - Part 4: Symbols for Forestry Machinery - Amendment 1: Additional Symbols First Edition; Amendment 1 10/01/2000
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other
Displays - Part 5: Symbols for Manual Portable Forestry Machinery First Edition; Amendment 1:06-01-2001
Petroleum Products - Determination of Base Number - Perchloric Acid Potentiometric Titration Method Second Edition
Photography - Rolls of Sensitized Material for the Pre-Press Industry - Dimensions and Related Requirements Third Edition; Cancels
and Replaces ISO 6407:1992, ISO 6408:1991, and ISO 11313:1994
Cinematography - Tape Splices for 8 mm Type S Motion-Picture Film for Projector Use - Dimensions Second Edition
Cinematography - 35 mm Motion-Picture Film Perforated 8 mm Type S (1-3-5-7-0) and (1-0) - Cutting and Perforating Dimensions
Third Edition
Tractors and machinery for agriculture Seat belts Part 1: Anchorage location requirements First Edition; Together with ISO 3776-2
replaces ISO 3776: 1989
Tractors and machinery for agriculture ù Seat belts ù Part 2: Anchorage strength requirements First edition [Cancelled: ISO 3776]
Road Vehicles - Vehicle Identification Number (VIN) - Content and Structure Third Edition
Road Vehicles - World Manufacturer Identifier (WMI) Code Second Edition
Paper and Board - Determination of Tensile Strength After Immersion in Water Second Edition
Paper and board Determination of resistance to picking Accelerated speed method using the IGT-type tester (electric model)
Second Edition
ISO
ISO
ISO
3784
3785
3786
ISO
ISO
ISO
ISO
3788
3790
3791
3792
ISO
3794
ISO
ISO
ISO
ISO
ISO
3795
3796
3797
3800
3801
ISO
ISO
3802
3803
ISO
3807-1
ISO
3807-2
ISO
3808
ISO
ISO
ISO
ISO
3809
3810
3813
3815-1
ISO
ISO
ISO
ISO
3815-2
3819
3820
3821
Road Vehicles - Measurement of Impact Velocity in Collision Tests First Edition
Metallic materials Designation of test specimen axes in relation to product texture Second Edition
Shipbuilding - Inland Navigation Towing Hooks - Scale of Tractive Efforts First Edition
Information Processing - 9-Track, 12,7 mm (0,5 in) Wide Magnetic Tape for Information Interchange Using Phase Encoding at 126
ftpmm (3 200 ftpi) - 63 cpmm (1 600 cpi) Second Edition
Fishing Nets - Determination of Elongation of Netting Yarns First Edition
Office Machines and Data Processing Equipment - Keyboard Layouts for Numeric Applications First Edition
Adding Machines - Layout of Function Keyboard First Edition
Essential Oils (Containing Tertiary Alcohols) - Estimation of Free Alcohols Content by Determination of Ester Value After Acetylation
First Edition
Road Vehicles, and Tractors and Machinery for Agriculture and Forestry - Determination of Burning Behaviour of Interior Materials
Second Edition
Ships and Marine Technology - Clear Openings for External Single-Leaf Doors Second Edition
Shipbuilding - Vertical Steel Ladders First Edition
Threaded Fasteners - Axial Load Fatigue Testing - Test Methods and Evaluation of Results First Edition;
Textiles - Woven Fabrics - Determination of Mass per Unit Length and Mass per Unit Area First Edition
Information Processing - General Purpose Reels with 8 mm (5/16 in) Centre Hole for Magnetic Tape for Interchange Instrumentation
Applications First Edition
Road Vehicles - Hydraulic Pressure Test Connection for Braking Equipment Second Edition
Cylinders for Acetylene - Basic Requirements - Part 1: Cylinders without Fusible Plugs First Edition; This First Edition Together with
3807-2, Cancels and Replaces ISO 3807: 1977
Cylinders for Acetylene - Basic Requirements - Part 2: Cylinders with Fusible Plugs First Edition; This First Edition Together with 38071, Cancels and Replaces ISO 3807: 1977
Road Vehicles - Unscreened High-Voltage Ignition Cables - General Specifications, Test Methods and Requirements First Edition
Oil of lime (cold pressed), Mexican type [Citrus aurantifolia (Christm.) Swingle], obtained by mechanical means Third Edition
Floor Tiles of Agglomerated Cork - Methods of Test Second Edition; (Corrected and Reprinted - 1992)
Resilient floor coverings Cork floor tiles Specification Third Edition
Zinc and zinc alloys Part 1: Analysis of solid samples by optical emission spectrometry First edition
Zinc and zinc alloys Part 2: Analysis by inductively coupled plasma optical emission spectrometry First Edition; Supersedes ISO
3815
Laboratory Glassware - Beakers First Edition
Cinematography - Sprockets for 8 mm Type S Motion-Picture Film - Dimensions and Design First Edition
Gas Welding Equipment - Rubber Hoses for Welding, Cutting and Allied Processes Third Edition
ISO
3822-1
ISO
3822-2
ISO
3822-3
ISO
ISO
ISO
3822-4
3823-1
3823-2
ISO
3826-1
ISO
ISO
3826-3
3828
ISO
ISO
ISO
3830
3832
3833
ISO
ISO
ISO
ISO
3834-1
3834-2
3834-3
3834-4
ISO
3834-5 CORR 1
ISO
ISO
ISO
ISO
ISO
ISO
3834-5
3835-1
3835-2
3835-3
3835-4
3835-5
ISO
3837
Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations - Part 1: Method
of Measurement Third Edition
Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations - Part 2:
Mounting and Operating Conditions for Draw-Off Taps and Mixing Valves Second Edition; (CEN EN ISO 3822-2: 1995)
Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations - Part 3:
Mounting and Operating Conditions for In-Line Valves and Appliances Second Edition
Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations - Part 4:
Mounting and Operating Conditions for Special Appliances Second Edition
Dental Rotary Instruments - Burs - Part 1: Steel and Carbide Burs Second Edition
Dentistry Rotary bur instruments Part 2: Finishing burs Second Edition
Plastics collapsible containers for human blood and blood components Part 1: Conventional containers First Edition; Replaces ISO
3826
Plastics collapsible containers for human blood and blood components Part 3: Blood bag systems with integrated features First
Edition
Shipbuilding and Marine Structures - Deck Machinery - Vocabulary Second Edition
Petroleum Products - Determination of Lead Content of Gasoline - Iodine Monochloride Method Third Edition; (CEN EN ISO 3830:
1995) Also Known As BS 2000 PART 270/96; [Use: IP 270/96]
Passenger Cars - Luggage Compartments - Method of Measuring Reference Volume Third Edition
Road Vehicles - Types - Terms and Definitions Second Edition
Quality requirements for fusion welding - of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality
requirements Second edition
Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements Second edition
Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements Second edition
Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements Second edition
Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim
conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 TECHNICAL CORRIGENDUM 1 First edition
Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim
conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 First edition
Equipment for Vine Cultivation and Wine Making - Vocabulary - Part I First Edition
Equipment for Vine Cultivation and Wine Making - Vocabulary - Part II First Edition
Equipment for Vine Cultivation and Wine Making - Vocabulary - Part 3 First Edition
Equipment for Vine Cultivation and Wine Making - Vocabulary - Part 4 First Edition
Equipment for Vine Cultivation and Wine Making - Vocabulary - Part 5 First Edition
Liquid Petroleum Products - Determination of Hydrocarbon Types - Fluorescent Indicator Adsorption Method First Edition;
Corrigendum 1: 1994; Corrigendum 2: 1996
Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillary-stoppered pyknometer
and graduated bicapillary pyknometer methods Second Edition
ISO
3838
ISO
ISO
ISO
ISO
3839
3841
3842
3846
ISO
ISO
ISO
ISO
ISO
3847
3848
3849
3850
3852
Petroleum Products - Determination of Bromine Number of Distillates and Aliphatic Olefins - Electrometric Method Second Edition
Petroleum Waxes - Determination of Melting Point (Cooling Curve) First Edition
Road vehicles Fifth wheels Interchangeability Fourth Edition
Liquid Flow Measurement in Open Channels by Weirs and Flumes - Rectangular Broad-Crested Weirs Second Edition
Liquid Flow Measurement in Open Channels by Weirs and Flumes - End-Depth Method for Estimation of Flow in Rectangular
Channels with a Free Overfall First Edition
Oil of Citronella, Java Type Second Edition; Technical Corrigendum 1: 11/01/2002
Oil of Citronella, Sri Lanka Type [Cymbopogon Nardus (L.) W. Watson Var. Lenabatu Stapf.] Second Edition
Resilient floor coverings Determination of apparent density of composition cork First Edition
Iron ores for blast furnace and direct reduction feedstocks ù Determination of bulk density Third Edition
ISO
ISO
3853
3855
Road Vehicles - Towing Vehicle Coupling Device to Tow Caravans or Light Trailers - Mechanical Strength Test Second Edition
Milling Cutters - Nomenclature First Edition; Corrigendum 1: 1996
ISO
3856-1
ISO
3856-2
ISO
3856-3
ISO
3856-4
ISO
3856-5
ISO
3856-6
Paints and Varnishes - Determination ofSoluble" Metal Content- Part 5: Determination of Hexavalent Chromium Content of the
Pigment Portion of the Liquid Paint or the Paint in Powder Form - Diphenyl- carbazide Spectro- photometric Method Second Edition"
Paints and Varnishes - Determination ofSoluble" Metal Content - Part 6: Determination of Total Chromium Content of the Liquid
Portion of the Paint - Flame Atomic Absorption Spectrometric Method Second Edition"
ISO
ISO
ISO
ISO
3856-7
3857-1
3857-2
3857-3
Paints and Varnishes - Determination ofSoluble" Metal Content - Part 7: Determination of Mercury Content of the Pigment Portion of
the Paint and of the Liquid Portion of Water-Dilutable Paints - Flameless Atomic Absorption Spectrometric Method First Edition"
Compressors, Pneumatic Tools and Machines - Vocabulary - Part I: General First Edition
Compressors Pneumatic Tools and Machines - Vocabulary - Part II: Compressors First Edition
Compressors, Pneumatic Tools and Machines - Vocabulary - Part 3: Pneumatic Tools and Machines Second Edition
Paints and Varnishes - Determination ofSoluble" Metal Content - Part 1: Determination of Lead Content - Flame Atomic Absorption
Spectrometric Method and Dithizone Spectrophotometric Method Third Edition; (AS/NZS 1580.501.1:1994) 1994) (PNS 530: 1991)"
Paints and Varnishes - Determination ofSoluble" Metal Content - Part 2: Determination of Antimony Content - Flame Atomic
Absorption Spectrometric Method and Rhodamine B Spectrophotometric Method Second Edition"
Paints and Varnishes - Determination ofSoluble" Metal Content - Part 3: Determination of Barium Content - Flame Atomic Emission
Spectrometric Method Second Edition"
Paints and Varnishes - Determination ofSoluble" Metal Content - Part 4: Determination of Cadmium Content - Flame Atomic
Absorption Spectrometric Method and Polarographic Method Second Edition"
ISO
ISO
ISO
ISO
3858
3859
3860
3861
ISO
3862-1
ISO
ISO
3862-2
3863
ISO
ISO
3864-1
3864-2
ISO
ISO
3864-3
3865
ISO
ISO
3866
3867
ISO
ISO
3868
3869
ISO
ISO
ISO
ISO
ISO
ISO
3870
3871
3873
3874 AMD 4
3874 AMD 3
3874 AMD 2
ISO
ISO
ISO
ISO
ISO
ISO
3874 AMD 1
3874
3875
3876
3877-1
3877-2
Rubber compounding ingredients Carbon black Determination of light transmittance of toluene extract Second Edition; Replaces
ISO 3858-1:1990 and ISO 3858-2:1990
Inverse Dovetail Cutters and Dovetail Cutters with Cylindrical Shanks Third Edition
Bore Cutters with Key Drive - Form Milling Cutters with Constant Profile First Edition
Rubber Hoses for Sand and Grit Blasting - Specification Third edition
Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 1: Oil-based fluid
applications First Edition
Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 2: Water-based fluid
applications First edition; Cancels and Replaces ISO 3862:1991
Cylindrical Cork Stoppers - Dimensional Characteristics, Sampling, Packaging and Marking Second Edition
Graphical Symbols - Safety Colours and Safety Signs - Part 1: Design Principles for Safety Signs in Workplaces and Public Areas
First Edition; Corrected Version: 12/15/2003
Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels First Edition
Graphical symbols Safety colours and safety signs Part 3: Design principles for graphical symbols for use in safety signs First
Edition
Rubber, vulcanized or thermoplastic Methods of test for staining in contact with organic material Fourth Edition
Office Machines and Printing Machines Used for Information Processing - Widths of Fabric Printing Ribbons on Spools Exceeding 19
mm First Edition
Composition Cork - Expansion Joint Fillers - Test Methods Second Edition
Metallic and Other Non-Organic Coatings - Measurement of Coating Thicknesses - Fizeau Multiple-Beam Interferometry Method First
Edition; (CEN EN ISO 3868: 1994)
Composition Cork - Expansion Joint Fillers - Specification, Packaging and Marking Second Edition
Conveyor Belts (Fabric Carcass), with Length Between Pulley Centres up to 300 m, for Loose Bulk Materials - Adjustment of Take-Up
Device First Edition
Road Vehicles - Labelling of Containers for Petroleum-Based or Non-Petroleum-Based Brake Fluid Fourth Edition
Industrial Safety Helmets First Edition
Series 1 freight containers ù Handling and securing AMENDMENT 4: 45 ft containers First Edition
Series 1 freight containers ù Handling and securing AMENDMENT 3: Double stack rail car operations First Edition
Series 1 freight containers ù Handling and securing AMENDMENT 2: Vertical tandem lifting Fifth Edition
Series 1 freight containers ù Handling and securing AMENDMENT 1: Twistlocks, latchlocks, stacking fittings and lashing rod systems
for securing of containers Fifth Edition; Corrected and Reprinted 09/01/2001
Series 1 freight containers ù Handling and securing Fifth Edition
Machine tools Test conditions for external cylindrical centreless grinding machines Testing of the accuracy Third Edition
Shipbuilding - Inland Vessels - Hand-Holes Second Edition
Tyres, Valves and Tubes - List of Equivalent Terms - Part I: Tyres Second Edition
Tyres, Valves and Tubes - List of Equivalent Terms - Part 2: Tyre Valves Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3877-3
3877-4
3878
3880-1
3881
3882
3883
3887
ISO
ISO
ISO
3888-1
3888-2
3889
ISO
3890-1
ISO
ISO
3890-2
3891
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3892
3893
3894
3895
3896
3898
3899
3900
3901
3902
3903
3904
3907
3908
3909
3910
ISO
3911
Tyres, Valves and Tubes - List of Equivalent Terms - Part III: Tubes First Edition
Tyres, Valves and Tubes - List of Equivalent Terms - Part 4: Solid Tyres First Edition
Hardmetals - Vickers Hardness Test Second Edition; (CEN EN 23878: 1993)
Building Construction - Stairs - Vocabulary - Part 1: First Edition
Building Construction - Modular Co-Ordination - Stairs and Stair Openings - Co-Ordinating Dimensions First Edition
Metallic and Other Inorganic Coatings - Review of Methods of Measurement of Thickness Third Edition
Office Machines - Line and Character Capacity of Address Masters First Edition
Steel - Determination of Depth of Decarburization Second Edition
Passenger Cars - Test Track for a Severe Lane-Change Manoeuvre - Part 1: Double Lane-Change First Edition; Cancels and
Replaces TR 3888: 1975
Passenger cars Test track for a severe lane-change manoeuvre Part 2: Obstacle avoidance First Edition
Milk and milk products Specification of Mojonnier-type fat extraction flasks Second Edition; IDF 219
Milk and Milk Porducts - Determination of Residues of Organochlorine Compounds (Pesticides) - Part 1: General Considerations and
Extraction Methods First Edition
Milk and Milk Porducts - Determination of Residues of Organochlorine Compounds (Pesticides) - Part 2: Test Methods for Crude
Extract Purification and Confirmation First Edition
Acoustics - Procedure for Describing Aircraft Noise Heard on the Ground First Edition
Conversion Coatings on Metallic Materials - Determination of Coating Mass per Unit Area - Gravimetric Methods Edition; (CEN EN
ISO 3892: 1994) (PNS 683: 1990) Second Edition
Concrete - Classification by Compressive Strength First Edition
Road vehicles Wheels/rims for commercial vehicles Test methods Third Edition
Road Vehicles - Screened and Waterproof Spark-Plug and Its Connection - Type 2 Third Edition
Road Vehicles - Screened and Waterproof Spark-Plug and Its Connection - Type 3 Third Edition
Bases for Design of Structures - Notations - General Symbols Third Edition
Rubber - Nitrile latex - Determination of residual acrylonitrile content Third Edition
Rubber - Nitrile Latex - Determination of Bound Acrylonitrile Content Second Edition
Information and Documentation - International Standard Recording Code (ISRC) Second Edition
Shipbuilding and Marine Structures - Gaskets for Rectangular Windows and Side Scuttles Second Edition
Shipbuilding and Marine Structures - Ships Ordinary Rectangular Windows Second Edition
Shipbuilding and Marine Structures - Clear-View Screens Second Edition
Hardmetals - Determination of Total Carbon Content - Gravimetric Method Second Edition; (CEN EN 23907: 1993)
Hardmetals - Determination of Insoluble (Free) Carbon Content - Gravimetric Method Second Edition; (CEN EN 23908: 1993)
Hardmetals - Determination of Cobalt - Potentiometric Method First Edition; (CEN EN 23909: 1993)
Rubber Boots, Unlined Moulded Second Edition
Wheels and Rims for Pneumatic Tyres - Vocabulary, Designation and Marking Roues Et Jantes Pour Pneumatiques - Vocabulaire,
Designation Et Marquage Third Edition
ISO
ISO
ISO
3912
3913
3914-1
ISO
3914-2
ISO
3914-3
ISO
3914-4
ISO
3914-5
ISO
3914-6
ISO
ISO
3914-7
3915
ISO
ISO
ISO
ISO
3917
3918
3919
3923-1
Woodruff Keys and Keyways First Edition; (NZS/ISO 3912: 1977)
Shipbuilding - Welded Steel Bollards First Edition: Addendum 1: 1980
Textile Machinery and Accessories - Cylindrical Tubes - Part 1: Recommended Main Dimensions Second Edition
Textile Machinery and Accessories - Cylindrical Tubes - Part 2: Dimensions, Tolerances and Designation of Tubes for Open-End
Spinning Machines Second Edition
Textile Machinery and Accessories - Cylindrical Tubes - Part 3: Dimensions, Tolerances and Designation of Tubes for Tape Yarns
Second Edition
Textile Machinery and Accessories - Cylindrical Tubes - Part 4: Dimensions, Tolerances and Designation of Tubes for Textured Yarns
Second Edition
Textile Machinery and Accessories - Cylindrical Tubes - Part 5: Dimensions, Tolerances and Designation of Tubes for Continuous
Spin-Drawn Synthetic Filament Yarns First Edition
Textile Machinery and Accessories - Cylindrical Tubes - Part 6: Dimensions, Tolerances and Designation of Tubes for Cross-Wound
Packages in Winding and Twisting First Edition
Textile Machinery and Accessories - Cylindrical Tubes - Part 7: Dimensions, Tolerances and Designation of Perforated Tubes for
Cheese Dyeing First Edition;
Plastics - Measurement of Resistivity of Conductive Plastics First Edition
Road Vehicles - Safety Glazing Materials - Test Methods for Resistance to Radiation, High Temperature, Humidity, Fire and
Simulated Weathering Third Edition
Milking Machine Installations - Vocabulary Installations De Traite Mecanique - Vocabulaire Third Edition
Coated Abrasives - Flap Wheels with Shafts Fourth edition
Metallic Powders - Determination of Apparent Density - Part 1: Funnel Method Second Edition
ISO
ISO
ISO
ISO
3923-2
3924
3925
3926
Metallic Powders - Determination of Apparent Density - Part 2: Scott Volumeter Method First Edition; (CEN EN 23923-2: 1993)
Petroleum Products - Determination of Boiling Range Distribution - Gas Chromatography Method Second Edition
Unsealed Radioactive Substances - Identification and Certification First Edition
Shipbuilding - Inland Navigation - Couplings for Oil and Fuel Reception - Mating Dimensions Second Edition
ISO
ISO
ISO
ISO
3927
3928
3929
3930
ISO
ISO
ISO
ISO
3934
3935
3936
3937
Metallic Powders, Excluding Powders for Hardmetals - Determination of Compressibility in Uniaxial Compression Third Edition
Sintered Metal Materials, Excluding Hardmetals - Fatigue Test Pieces Second Edition
Road vehicles Measurement methods for exhaust gas emissions during inspection or maintenance Third edition
Instruments for Measuring Vehicle Exhaust Emissions Third Edition; OIML R 99; Amendment 1: 10/15/2004
Rubber, Vulcanized and Thermoplastic - Preformed Gaskets Used in Buildings - Classification, Specifications and Test Methods
Second Edition
Shipbuilding - Inland Navigation - Fire-Fighting Water System - Pressures First Edition
Reduction Sleeves with Tenon Drive with External and Internal 7/24 Taper - Dimensions Third Edition
Cutter Arbors with Tenon Drive - Dimensions Third Edition
ISO
ISO
ISO
ISO
ISO
ISO
3938
3939
3940
3941
3943
3944
ISO
ISO
ISO
ISO
ISO
3946
3947
3948
3949
3950
Hydraulic Fluid Power - Contamination Analysis - Method for Reporting Analysis Data First Edition
Fluid Power Systems and Components - Multiple Lip Packing Sets - Methods for Measuring Stack Heights First Edition
Tapered Die-Sinking Cutters with Parallel Shanks First Edition
Classification of Fires Second Edition
Photography - Processing Chemicals - Specifications for Anhydrous Sodium Acetate Second Edition
Fertilizers - Determination of Bulk Density (Loose) Third Edition; (CEN EN 1236: 1995)
Starches and Derived Products - Determination of Total Phosphorous Content - Spectrophotometric Method First Edition; (CENELEC
EN ISO 3946 - 1994)
Starches, Native or Modified - Determination of Total Fat Content First Edition; (CENELEC EN ISO 3947 - 1994)
Shipbuilding - Inland Vessels - Compressed-Air Systems - Pressure Ranges First Edition
Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification Third Edition
Dentistry - Designation System for Teeth and Areas of the Oral Cavity Second Edition; (Corrected and Reprinted - 1995)
ISO
3951-1
Sampling procedures for inspection by variables Part 1: Specification for single sampling plans indexed by acceptance quality limit
(AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL First edition; Cancels and Replaces ISO 3951:1989
ISO
3951-2
ISO
3951-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3951-5
3952-1
3952-2
3952-3
3952-4
3953
3954
3958
3959
ISO
ISO
ISO
ISO
ISO
3960
3961
3963
3964
3965
Sampling procedures for inspection by variables Part 2: General specification for single sampling plans indexed by acceptance
quality limit (AQL) for lot-by-lot inspection of independent quality characteristics First edition; Cancels and Replaces ISO 3951:1989
Sampling procedures for inspection by variables ù Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lotby-lot inspection First Edition
Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for
inspection by variables (known standard deviation) First Edition;
Kinematic Diagrams - Graphical Symbols - Part 1 First Edition; Amendment 1: 10/15/2002
Kinematic Diagrams - Graphical Symbols - Part 2 First Edition
Kinematic Diagrams - Graphical Symbols - Part 3 First Edition; (CEN EN ISO 3952-3: 1994)
Kinematic Diagrams - Graphical Symbols - Part 4 First Edition
Metallic Powders - Determination of Tap Density Third Edition; (CEN EN ISO 3953: 1995)
Powders for Powder Metallurgical Purposes - Sampling Second Edition
Passenger Cars - Driver Hand-Control Reach Second Edition
Green Bananas - Ripening Conditions First Edition
Animal and vegetable fats and oils ù Determination of peroxide value ù Iodometric (visual) endpoint determination Fourth Edition
Animal and Vegetable Fats and Oils - Determination of Iodine Value Third Edition
Fertilizers - Sampling from a Conveyor by Stopping the Belt First Edition
Dental Handpieces - Coupling Dimensions Second Edition; (CAN/CSA-Z349.29-M92)
Agricultural Wheeled Tractors - Maximum Speeds - Method of Determination Second Edition
ISO
ISO
3968
3969
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
3970
3972
3974
3975
3976
3977-1
3977-2
3977-3
3977-4
3977-5
3977-7
3977-8
3977-9
ISO
3978
ISO
ISO
ISO
ISO
ISO
3979
3980
3981
3984
3987
ISO
3993
ISO
3994
ISO
3995
ISO
ISO
3996
3998
ISO
3999
Hydraulic Fluid Power - Filters - Evaluation of Differential Pressure Versus Flow Characteristics Second Edition; Technical
Corrigendum 1: 9/01/2002; Supersedes (NFPA) B93.80M
Shipbuilding - Inland Vessels - Operational Documentation First Edition
Modular Units for Machine Tool Construction - Integral Way Columns - Floor-Mounted Type First Edition; Amendment 1: 1982
Sensory Analysis - Methodology - Method of Investigating Sensitivity of Taste Second Edition
Definitions of Living Animals for Slaughter - Ovines First Edition
Definitions of Living Animals for Slaughter - Horses First Edition
Milk fat Determination of peroxide value Second Edition
Gas Turbines - Procurement - Part 1: General Introduction and Definitions First Edition; Replaces ISO 3977:1991
Gas Turbines - Procurement - Part 2: Standard Reference Conditions and Ratings First Edition; Replaces ISO 3977:1991
Gas Turbines - Procurement - Part 3: Design Requirements Second Edition
Gas Turbines - Procurement - Part 4: Fuels and Environment First Edition
Gas Turbines - Procurement - Part 5: Applications for Petroleum and Natural Gas Industries First Edition
Gas Turbines - Procurement - Part 7: Technical Information First Edition
Gas Turbines - Procurement - Part 8: Inspection, Testing, Installation and Commissioning First Edition
Gas Turbines - Procurement - Part 9: Reliability, Availability, Maintainability and Safety First Edition
Aluminium and Aluminium Alloys - Determination of Chromium - Spectrophotometric Method Using Diphenylcarbazide, After
Extraction First Edition
Aluminium and Aluminium Alloys - Determination of Nickel - Spectrophotometric Method Using Dimethylglyoxime First Edition
Aluminium and Aluminium Alloys - Determination of Copper - Atomic Absorption Spectrophotometric Method First Edition
Aluminium and Aluminium Alloys - Determination of Nickel - Atomic Absorption Spectrophotometric Method First Edition
Road vehicles Rear moving barrier impact test procedure Third Edition
Petroleum Products - Lubricating Oils and Additives - Determination of Sulphated Ash Second Edition
Liquefied Petroleum Gas and Light Hydrocarbons - Determination of Density or Relative Density - Pressure Hydrometer Method First
Edition; (CEN EN ISO 3993: 1995)
Plastics Hoses - Helical-Thermoplastic-Reinforced Thermoplastics Hoses for Suction and Discharge of Aqueous Materials Specification Third Edition
Metallic Powders - Determination of Green Strength by Transverse Rupture of Rectangular Compacts Second Edition; (CEN EN
23995: 1993)
Road Vehicles - Brake Hose Assemblies for Hydraulic Braking Systems Used with a Non-Petroleum-Base Brake Fluid Third Edition
Textiles - Determination of Resistance to Certain Insect Pests First Edition
Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests Second Edition;
Supersedes ISO 3999-1: 2000
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4000-1
4000-2
4001
4002-1
4002-2
4003
4004
4006
4007
4008-1
4008-2
Passenger Car Tyres and Rims - Part 1: Tyres (Metric Series) Eighth Edition
Passenger car tyres and rims ù Part 2: Rims Fourth Edition
Shipbuilding - Inland Navigation - Raft-Type Life-Saving Apparatus First Edition
Equipment for Sowing and Planting - Disks - Part I: Concave Disks Type D1 - Dimensions First Edition
Equipment for Sowing and Planting - Disks - Part II: Flat Disks Type D2 with Single Bevel - Dimensions First Edition
Permeable Sintered Metal Materials - Determination of Bubble Test Pore Size First Edition; (CEN EN 24003: 1993)
Agricultural Tractors and Machinery - Track Widths First Edition
Measurement of Fluid Flow in Closed Conduits - Vocabulary and Symbols Second Edition; (CEN EN 24006: 1993)
Personal Eye-Protectors - Vocabulary First Edition
Road Vehicles - Fuel Injection Pump Testing - Part 1: Dynamic Conditions Second Edition; (Erratum-1982)
Road Vehicles - Fuel Injection Pump Testing - Part 2: Static Conditions First Edition
ISO
4008-3
Road Vehicles - Fuel Injection Pump Testing - Part 3: Application and Test Procedures First Edition; Amendment 1: 10/01/2002
ISO
ISO
ISO
4009
4010
4014
Commercial Vehicles - Location of Electrical and Pneumatic Connections between Towing Vehicles and Trailers Third Edition
Diesel Engines - Calibrating Nozzle, Delay Pintle Type Second Edition
Hexagon Head Bolts - Product Grades A and B Third Edition
ISO
ISO
ISO
ISO
ISO
ISO
4015
4016
4017
4018
4019
4020
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4021
4022
4023
4024
4026
4027
4028
4029
4030
4032
4033
Hexagon Head Bolts - Product Grade B - Reduced Shank (Shank Diameter is Approximately Equal to Pitch Diameter) First Edition
Hexagon Head Bolts - Product Grade C Third Edition
Hexagon Head Screws - Product Grades A and B Third Edition
Hexagon Head Screws - Product Grade C Third Edition
Structural Steels - Cold-Formed, Welded, Structural Hollow Sections - Dimensions and Sectional Properties Second Edition
Road Vehicles - Fuel Filters for Diesel Engines - Test Methods First Edition; Replaces ISO 4020-1
Hydraulic Fluid Power - Particulate Contamination Analysis - Extraction of Fluid Samples from Lines of an Operating System Second
Edition
Permeable Sintered Metal Materials - Determination of Fluid Permeability Second Edition
Rubber Hoses for Steam - Test Methods Third Edition (CEN EN ISO 4023:1995)
Road Vehicles - Ignition Coils - Low-Tension Cable Connections Second Edition
Hexagon socket set screws with flat point Third Edition
Hexagon Socket Set Screws with Cone Point Third Edition
Hexagon Socket Set Screws with Dog Point Third Edition
Hexagon socket set screws with cup point Third Edition
Road Vehicles - Vehicle Identification Number (VIN) - Location and Attachment Second Edition
Hexagon Nuts, Style 1 - Product Grades A and B Third Edition; Corrected and Reprinted: 03/01/2001
Hexagon Nuts, Style 2 - Product Grades A and B Second Edition
ISO
ISO
ISO
4034
4035
4036
ISO
4037-1
ISO
4037-2
ISO
4037-3
ISO
4037-4
Hexagon Nuts - Product Grade C Third Edition
Hexagon Thin Nuts (Chamfered) - Product Grades A and B Third Edition
Hexagon Thin Nuts (Unchamfered) - Product Grade B Second Edition; Corrected and Reprinted 12-1-2000
X and Gamma Reference Radiation for Calibrating Dosemeters and Doserate Meters and for Determining Their Response as a
Function of Photon Energy - Part 1: Radiation Characteristics and Production Methods First Edition
X and Gamma Reference Radiation for Calibrating Dosemeters and Doserate Meters and for Determining Their Response as a
Function of Photon Energy - Part 2: Dosimetry for Radiation Protection over the Energy Ranges 8 keV to 1,3 MeV and 4 MeV to 9
MeV First Edition
X and Gamma Reference Radiation for Calibrating Dosemeters and Doserate Meters and for Determining Their Response as a
Function of Photon Energy - Part 3: Calibration of Area and Personal Dosemeters and the Measurement of Their Response as a
Function of Energy and Angle of Incidence First Edition
X and Gamma Reference Radiation for Calibrating Dosemeters and Doserate Meters and for Determining Their Response as a
Function of Photon Energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields First
Edition
ISO
4038
Road Vehicles - Hydraulic Braking Systems - Simple Flare Pipes, Tapped Holes, Male Fittings and Hose End Fittings Third Edition
ISO
4039-1
ISO
ISO
ISO
ISO
ISO
ISO
4039-2
4040
4042
4043
4044
4045
ISO
4046-1
ISO
4046-2
ISO
4046-3
ISO
4046-4
Road Vehicles - Pneumatic Braking Systems - Part 1: Pipes, Male Fittings and Tapped Holes with Facial Sealing Surface First Edition
Road Vehicles - Pneumatic Braking Systems - Part 2: Pipes, Male Fittings and Tapped Holes with Conical Sealing Surface First
Edition
Road Vehicles - Location of Hand Controls, Indicators and Tell-Tales in Motor Vehicles Fourth Edition
Fasteners - Electroplated Coatings Second Edition
Mobile Booths for Simultaneous Interpretation - General Characteristics and Equipment Second Edition
Leather - Preparation of Chemical Test Samples First Edition
Leather - Determination of pH First Edition
Paper, Board, Pulps and Related Terms - Vocabulary - Part 1: Alphabetical Index Papier, Carton, Pates et Termes Connexes Vocabulaire - Partie 1: Index Alphabetique First Edition
Paper, Board, Pulps and Related Terms - Vocabulary - Part 2: Pulping Terminology Papier, Carton, Pates et Termes Connexes Vocabulaire - Partie 2: Terminologie de la Fabrication de la Pate First Edition
Paper, Board, Pulps and Related Terms - Vocabulary - Part 3: Paper-Making Terminology Papier, Carton, Pates et Termes
Connexes - Vocabulaire - Partie 3: Terminologie de la Fabrication du Papier First Edition
Paper, Board, Pulps and Related Terms - Vocabulary - Part 4: Paper and Board Grades and Converted Products Papier, Carton,
Pates Et Termes Connexes - Vocabulaire - Partie 4: Categories Et Produits Transformes De Papier Et De Carton First Edition;
Together with ISO 4046-1, ISO 4046-2, ISO 4046-3 and ISO 4046-5, cancel and replaces ISO 4046: 1978
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4046-5
4047
4048
4049
4050
4051
4052
ISO
ISO
4057
4058
ISO
ISO
4059
4063
ISO
4064-1
ISO
4064-2
ISO
ISO
4064-3
4065
ISO
ISO
4067-2
4072
ISO
ISO
ISO
4073
4074 CORR 1
4074
ISO
4079-1
ISO
4079-2
ISO
ISO
4080
4081
Paper, Board, Pulps and Related Terms - Vocabulary - Part 5: Properties of Pulp, Paper and Board Papier, Carton, Pates et Termes
Connexes - Vocabulaire - Partie 5: Proprietes De La Pate, Du Papier Et Due Carton First Edition; Together with ISO 4046-1, ISO
4046-2, ISO 4046-3 and ISO 4046-4, cancel and replace ISO 4046: 1978
Leather - Determination Sulphated Total Ash and Sulphated Water-Insoluble Ash First Edition
Leather - Determination of Matter Soluble in Dichloromethane First Edition
Dentistry - Polymer-Based Filling, Restorative and Luting Materials Third Edition
Shipbuilding - Inland Vessels -Rhine" and Hall s Stockless Anchors First Edition"
Shipbuilding - Inland Vessels - Steering Gear - Values of Torques First Edition
Coffee - Determination of Caffeine Content (Reference Method) First Edition
Information Processing - Data Interchange on 6,30 mm (0.25 in) Magnetic Tape Cartridge, 63 bpmm (1 600 bpi) Phase-Encoded
Second Edition
Magnesium and Its Alloys - Determination of Nickel - Photometric Method Using Dimethylglyoxime First Edition
Polyethylene (PE) Pipes - Pressure Drop in Mechanical Pipe-Jointing Systems - Method of Test and Requirements First Edition
Welding and Allied Processes - Nomenclature of Processes and Reference Numbers Third Edition
Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 1: Specifications
Third Edition; Replaces ISO 7858-1:1998 and ISO 10385-1:2000
Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 2: Installation
requirements Third Edition; Replaces ISO 7858-2:2000
Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 3: Test methods and
equipment Third Edition; Replaces ISO 7858-3:1992
Thermoplastic Pipes - Universal Wall Thickness Table Second Edition
Building and Civil Engineering Drawings - Installations - Part 2: Simplified Representation of Sanitary Appliances First Edition
Green Coffee in Bags - Sampling First Edition
Dental Equipment - Items of Dental Equipment at the Working Place - Identification System First Edition; (Corrected and Reprinted 1981) (CAN/CSA-Z349.30-M92)
Natural latex rubber condoms ù Requirements and test methods First Edition
Natural latex rubber condoms ù Requirements and test methods First Edition
Rubber Hoses and Hose Assemblies - Textile-Reinforced Hydraulic Types - Specification - Part 1: Oil-Based Fluid Applications First
Edition
Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 2: Water-based fluid applications First
Edition
Rubber and Plastics Hoses and Hose Assemblies - Determination of Permeability to Gas Third Edition; Corrigendum 1-1997;
Corrigendum 2-1998
Rubber hoses and tubing for cooling systems for internal-combustion engines Specification Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
4082
4084
4085
4086
4087
4089
ISO
ISO
ISO
4090
4091
4093
ISO
ISO
ISO
4094
4095
4097
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4098
4100
4101
4102
4103
4105
4106
4107
4112
4113
4115
4116
4117
4118
4119
4120
4121
4123
4124
4125
4126-1
Road Vehicles - Motor Vehicles - Flasher Units First Edition
Aircraft - Repairable Contactors (Not Hermetically Sealed) - Performance Requirements First Edition
Shipbuilding - Inland Navigation - Swing Derricks First Edition
Road Vehicles - 90 Semi-Trailer Fifth Wheel Kingpin - Interchangeability Third Edition
Micrographics Microfilming of newspapers for archival purposes on 35 mm microfilm Third Edition
Shipbuilding - Inland Navigation - Sealing Rubber for Covers of Cargo Hatches First Edition
Photography - Medical Radiographic Cassettes/Screens/Films and Hard-copy Imaging Films - Dimensions and Specifications Third
Edition
Road Vehicles - Connectors for the Electrical Connection of towing and towed vehicles, tests and requirements Third Edition
Diesel Engines - Fuel Injection Pumps - High-Pressure Pipes for Testing Third Edition
Paper, board and pulps - International calibration of testing apparatus - Nomination and acceptance of standardizing and authorized
laboratories Second edition
Aerospace - Bihexagonal Drives - Wrenching Configuration - Metric Series Second Edition
Rubber, Ethylene-Propylene-Diene (EPDM) - Evaluation Procedure Fifth Edition
Leather Chemical tests Determination of water-soluble matter, water-soluble inorganic matter and watersoluble organic matter First
Edition; IULTCS/IUC 6
Road Vehicles - World Parts Manufacturer Identifier (WPMI) Code First Edition
Drawn Steel Wire for Elevator Ropes - Specifications First Edition
Equipment for Crop Protection - Sprayers - Connection Threading First Edition
Concrete - Classification of Consistency First Edition
Textile Machinery and Accessories - Wires for Flexible Card Clothings First Edition
Motorcycles - Engine Test Code - Net Power Third Edition
Commercial Vehicles - Wheel Hub Attachment Dimensions Third Edition
Cereals and Pulses - Guidance on Measurement of the Temperature of Grain Stored in Bulk Second Edition
Road Vehicles - Calibration Fluid for Diesel Injection Equipment Second Edition
Air Cargo Equipment - Air/Land Pallet Nets Third Edition
Air Cargo Equipment - Ground Equipment Requirements for Compatibility with Aircraft Unit Load Devices Second Edition
Air and Air/Land Cargo Pallets - Specification and Testing Second Edition
Air cargo Non-certified containers for the lower deck of large-capacity aircraft Specification and testing Third Edition
Pulps - Determination of Stock Concentration Second Edition (CEN EN ISO 4119: 1996)
Sensory analysis Methodology Triangle test Second Edition
Sensory analysis Guidelines for the use of quantitative response scales Second Edition
Belt Conveyors - Impact Rings for Carrying Idlers and Discs for Return Idlers - Main Dimensions First Edition;
Liquid Hydrocarbons - Dynamic Measurement - Statistical Control of Volumetric Metering Systems First Edition
Dry Fruits and Dried Fruits - Definitions and Nomenclature Second Edition
Safety devices for protection against excessive pressure Part 1: Safety valves Second Edition
ISO
4126-2
ISO
4126-3
ISO
4126-4
ISO
4126-5 CORR 2
ISO
4126-5 CORR 1
ISO
4126-5
ISO
4126-6
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4126-7 CORR 1
4126-7
4127-1
4127-2
4128
4129
4130
4131
ISO
ISO
4132
4134
ISO
ISO
ISO
ISO
ISO
4135
4136
4138
4139
4140
ISO
4141-1
ISO
4141-2
Safety Devices for Protection Against Excessive Pressure - Part 2: Bursting Disc Safety Devices First Edition
Safety devices for protection against excessive pressure Part 3: Safety valves and bursting disc safety devices in combination First
Edition;:1991 [Replaced: ISO 6718]
Safety devices for protection against excessive pressure Part 4: Pilot-operated safety valves First Edition; Replaces ISO 6718:1991
Safety devices for protection against excessive pressure ù Part 5: Controlled safety pressure relief systems (CSPRS) TECHNICAL
CORRIGENDUM 1 First Edition
Safety devices for protection against excessive pressure ù Part 5: Controlled safety pressure relief systems (CSPRS) TECHNICAL
CORRIGENDUM 1 First Edition
Safety devices for protection against excessive pressure ù Part 5: Controlled safety pressure relief systems (CSPRS) First Edition
Safety devices for protection against excessive pressure Part 6: Application, selection and installation of bursting disc safety devices
First Edition
Safety devices for protection against excessive pressure ù Part 7: Common data TECHNICAL CORRIGENDUM 1 First Edition
Safety devices for protection against excessive pressure ù Part 7: Common data First Edition
Shipbuilding - Inland Navigation - Fairleads - Part 1: Two-Lip Fairleads First Edition
Shipbuilding - Inland Vessels - Fairleads - Part 2: Roller Fairleads First Edition
Aircraft - Air Mode Modular Containers First Edition
Mopeds - Symbols for Controls, Indicators and Tell-Tales Second Edition
Road Vehicles - Three-Dimensional Reference System and Fiducial Marks - Definitions First Edition
Road Vehicles - Dimensional Codes for Passenger Cars First Edition;
Unplasticized Polyvinyl Chloride (PVC) and Metal Adaptor Fittings for Pipes Under Pressure - Laying Lengths and Size of Threads Metric Series First Edition
Meat and Meat Products - Determination of L-(+)- Glutamic Acid Content - Reference Method Second Edition
Anaesthetic and Respiratory Equipment - Vocabulary Materiel D'Anesthesie Et De Reanimation Respiratoire - Vocabulaire Third
Edition
Destructive Tests on Welds in Metallic Materials - Transverse Tensile Test Second Edition
Passenger cars Steady-state circular driving behaviour Open-loop test methods Third Edition
Ferrosilicon - Determination of Aluminium Content - Flame Atomic Absorption Spectrometric Method First Edition
Ferrochromium and Ferrosilicochromium - Determination of Chromium Content - Potentiometric Method First Edition
Road vehicles - Multi-core connecting cables - Part 1: Test methods and requirements for basic performance sheathed cables
Second Edition
Road vehicles Multi-core connecting cables Part 2: Test methods and requirements for high performance sheathed cables Second
Edition
ISO
4141-3
ISO
ISO
ISO
ISO
ISO
4141-4
4142
4143
4144
4145
ISO
ISO
ISO
ISO
ISO
ISO
4147
4148
4149
4150
4151
4153
ISO
4156-1
ISO
4156-2
ISO
ISO
ISO
ISO
4156-3
4157-1
4157-2
4157-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4158
4159
4161
4162
4164
4165
4167
4168
4170
Road Vehicles - Multicore Connecting Cables - Part 3: Construction Dimensions and Marking of Unscreened Sheathed Low-Voltage
Cables Second Edition
Road Vehicles - Multi-core Connecting Cables - Part 4: Articulation Test Method and Requirements for Coiled Cable Assemblies First
Edition
Laboratory Glassware - Test Tubes Second Edition
Shipbuilding - Inland Vessels - Open Rowing Lifeboats First Edition
Pipework - Stainless Steel Fittings Threaded in Accordance with ISO 7-1 Second Edition
Non-Alloy Steel Fittings Threaded to ISO 7/1 Second Edition
Aerospace - Nuts, Hexagonal, Slotted (Castellated), Nrml Ht, Nrml Across Flats, with MJ Threads, Cls: 600MPa (at Ambt T)/120 Dgs
C, 600MPa (at Ambt T)/235 Dgs. C, 900MPa (at Ambt T)/425 Dgs. C, 1100 MPa (at Ambt T)/235 Dgs. C, 1100 MPa (at Ambt T)/315
Dgs. C, 1100MPa (at Ambt T)/650 Dgs. C, 1210MPa (at Ambt T)/730 Dgs. C, 1250MPa (at Ambt T)/235 Dgs. C and 1550MPa (at
Ambt T)/600 Dgs C - Dims. Third Edition
Road Vehicles - Special Warning Lamps - Dimensions Fourth Edition
Green Coffee - Olfactory and visual examination and determination of foreign matter and defects Second edition
Green Coffee - Size Analysis - Manual Sieving Second Edition
Road Vehicles - Mopeds - Type, Location and Functions of Controls Second Edition
Aircraft - Pressure Fuel Dispensing System - Test Procedure and Limit Value for Shut-Off Surge Pressure First Edition
Straight cylindrical involute splines - Metric module, side fit - Part 1: Generalities First Edition; Together with ISO 4156-2 and ISO
4156-3 Replaces ISO 4156
Straight cylindrical involute splines - Metric module, side fit - Part 2: Dimensions First Edition; Together with ISO 4156-1 and ISO
4156-3 Replaces ISO 4156
Straight cylindrical involute splines - Metric module, side fit - Part 3: Inspection First Edition; Together with ISO 4156-1 and ISO 41562 Replaces ISO 4156
Construction Drawings - Designation Systems - Part 1: Buildings and Parts of Buildings Second Edition
Construction Drawings - Designation Systems - Part 2: Room Names and Numbers Second Edition
Construction Drawings - Designation Systems - Part 3: Room Identifiers First Edition
Ferrosilicon, Ferrosilicomanganese and Ferrosilicochromium - Determination of Silicon Content - Gravimetric Method First Edition
Ferromanganese and Ferrosilicomanganese - Determination of Manganese Content - Potentiometric Method First Edition
Hexagon Nuts with Flange - Coarse Thread Second Edition
Hexagon Flange Bolts - Small Series First Edition
Road Vehicles - Mopeds - Engine Test Code - Net Power First Edition
Road Vehicles - Electrical Connections - Double-Pole Connection Second Edition
Polyolefin agricultural twines Second Edition
Timekeeping Instruments - Conditions for Carrying out Checks on Radioluminescent Deposits Second Edition
Air Cargo Equipment - Interline Pallet Nets Third Edition
ISO
ISO
ISO
4171
4172
4173
Air Cargo Equipment - Interline Pallets Second Edition
Technical Drawings - Construction Drawings - Drawings for the Assembly of Prefabricated Structures Second Edition
Ferromolybdenum - Determination of Molybdenum Content - Gravimetric Method First Edition
ISO
ISO
ISO
ISO
ISO
4174
4175
4176
4178
4179
ISO
4180-1
ISO
ISO
ISO
ISO
4180-2
4182
4183
4184
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4185
4186
4187
4190-1
4190-2
4190-3
4190-5
ISO
4190-6
Cereals, Oilseeds and Pulses - Measurement of Unit Pressure Loss in One-Dimensional Air Flow Through Bulk Grain Second Edition
Shipbuilding - Shipborne Barges, Series 1 - Main Dimensions First Edition
Fertilizers - Determination of Nitrate Nitrogen Content - Nitron Gravimetric Method First Edition
Complete, Filled Transport Packages - Distribution Trials - Information to Be Recorded First Edition; (CEN EN 24178: 1992)
Ductile iron pipes and fittings for pressure and non-pressure pipelines Cement mortar lining Third Edition
Complete, Filled Transport Packages - General Rules for the Compilation of Performance Test Schedules - Part 1: General Principles
First Edition; (CEN EN 24180-1: 1992)
Complete, Filled Transport Packages - General Rules for the Compilation of Performance Test Schedules - Part 2: Quantitative Data
First Edition; (CEN EN 24180-2: 1992)
Motor Vehicles - Measurement of Variations in Dipped-Beam Headlamp Angle as a Function of Load Third Edition
Belt Drives - Classical and Narrow V-Belts - Grooved Pulleys (System Based on Datum Width) Third Edition
Belt Drives - Classical and Narrow V-Belts - Lengths in Datum System Second Edition; (Corrected and Reprinted - 1993)
Measurement of Liquid Flow in Closed Conduits - Weighing Method (CEN EN 24185: 1993) First Edition; Technical Corrigendum 1:
1993
Asparagus - Guide to Storage First Edition
Horse-Radish - Guide to Storage First Edition
Lift (US: Elevator) Installation - Part 1: Class I, II, III and VI Lifts Third Edition; Corrected and Reprinted: 03/01/2001
Lift (US: Elevator) Installation - Part 2: Class IV Lifts Second Edition
Passenger Lift Installations - Part 3: Service Lifts Class V First Edition
Lift (Elevator) installation Part 5: Control devices, signals and additional fittings Third Edition
Lifts and Service Lifts (USA: Elevators and Dumbwaiters) - Part 6: Passenger Lifts to Be Installed in Residential Buildings - Planning
and Selection First Edition
ISO
4192
ISO
ISO
4193
4194
ISO
ISO
ISO
4195
4197
4198
Aluminium and Aluminium Alloys - Determination of Lead Content - Flame Atomic Absorption Spectrometric Method First Edition
Aluminium and Aluminium Alloys - Determination of Chromium Content - Flame Atomic Absorption Spectrometric Method First
Edition
Magnesium Alloys - Determination of Zinc Content - Flame Atomic Absorption Spectrometric Method First Edition
Conveyor belts with heat-resistant rubber covers ù Heat resistance of covers ù Requirements and test methods First edition
[Replaced: ISO 4195-1, ISO 4195-2]
Equipment for Working the Soil - Hoe Blades - Fixing Dimensions Second Edition
Surface Active Agents - Detergents for Hand Dishwashing - Guide for Comparative Testing of Performance First Edition
Plain End Steel Tubes, Welded and Seamless - General Tables of Dimensions and Masses per Unit Length Fourth Edition; Replaces
ISO 134: 1973 and ISO 336: 1976
Reduction Sleeves with External 7/24 Taper for Tools with Morse Taper Shanks Second Edition
Parallel Shank Tools - Driving Tenons and Sockets - Dimensions First Edition
Countersinks, 90 Degrees, with Morse Taper Shanks and Detachable Pilots First Edition
ISO
ISO
ISO
ISO
4200
4202
4203
4204
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4205
4206
4207
4208
4209-1
4209-2
4210
4211
4211-2
4211-3
4211-4
ISO
4217
ISO
4220
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4221
4223-1
4223-2
4224
4225
4226
4228
4229
4230
4231
Air Quality - Determination of Mass Concentration of Sulphur Dioxide in Ambient Air - Thorin Spectrophotometric Method First Edition
Definitions of Some Terms Used in the Tyre Industry - Part 1: Pneumatic Tyres Fourth Edition
Definitions of Some Terms Used in the Tyre Industry - Part 2: Solid Tyres Second Edition
Ambient Air - Determination of Carbon Monoxide - Non-Dispersive Infrared Spectrometry Method First Edition
Air Quality - General Aspects - Vocabulary Second Edition
Air Quality - General Aspects - Units of Measurement Second Edition
Spanners and Wrenches - Spline Drive Ends for Power Socket Wrenches First Edition
Assembly Tools for Screws and Nuts - Single-Head Engineer s Wrenches - Gaps from 50 to 120 mm First Edition
Hand- and Machine-Operated Circular Screwing Dies for Taper Pipe Threads - R Series Second Edition
Hand- and Machine-Operated Circular Screwing Dies for Parallel Pipe Threads - G Series Second Edition
ISO
4232-1
Office Machines - Minimum Information to Be Included in Specification Sheets - Part 1: Duplicators First Edition; Erratum-1980
ISO
4232-2
Office Machines - Minimum Information to Be Included in Specifications Sheets - Part 2: Document Copying Machines First Edition
Countersinks, 90 Degrees, with Parallel Shanks and Solid Pilots Second Edition; (BS 328: Part 6: 1992) (NZS/BS 328: Pt 6: 1992)
Counterbores with Parallel Shanks and Solid Pilots Second Edition (BS 328: Part 7: 1992) (NZS/BS 328: Pt 7: 1992)
Counterbores with Morse Taper Shanks and Detachable Pilots First Edition
Detachable Pilots for Use with Counterbores and 90 Degrees Countersinks - Dimensions First Edition
Truck and bus tyres and rims (metric series) Part 1: Tyres Sixth Edition
Truck and Bus Tyres and Rims (Metric Series) - Part 2: Rims Third Edition
Cycles - Safety Requirements for Bicycles Fourth Edition
Furniture - Assessment of Surface Resistance to Cold Liquids First Edition
Furniture - Tests for Surfaces - Part 2: Assessment of Resistance to Wet Heat First Edition
Furniture - Tests for Surfaces - Part 3: Assessment of Resistance to Dry Heat First Edition
Furniture - Tests for Surfaces - Part 4: Assessment of Resistance to Impact First Edition
Codes for the representation of currencies and funds Codes pour la reprÚsentation des monnaies et types de fonds Sixth Edition;
Technical Corrigendum: 11/01/2004
Ambient Air - Determination of a Gaseous Acid Air Pollution Index - Titrimetric Method with Indicator or Potentiometric End-Point
Detection First Edition; (Corrected and Reprinted - 1984)
ISO
4232-3
ISO
ISO
4238
4241
ISO
4242
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4243
4246
4247
4248
4249-1
4249-2
4249-3
4250-1
4250-2
4250-3
ISO
ISO
ISO
4251-1
4251-2
4251-3
ISO
4251-4
ISO
ISO
ISO
ISO
ISO
4251-5
4252
4253
4254-1
4254-3
ISO
4254-5
ISO
4254-6
ISO
4254-7
Office Machines - Minimum Information to Be Included in Specification Sheets - Part 3: Postal Franking Machines First Edition
Cinematography - Optical Printing Ratios for Enlargement and Reduction of Motion-Picture Film Images - Specifications First Edition
Cinematography - Theatre Projection Leader, Trailer and Cue Marks - Specifications Third Edition
Cinematography - Recording Head Gaps for Two Sound Records on 16 mm Magnetic Film - Positions and Width Dimensions First
Edition
Cinematography - Picture Image Area and Photographic Sound Record on 16 mm Motion- Picture Release Prints - Positions and
Dimensions First Edition
Cinematography - Vocabulary Second Edition
Jig Bushes and Accessories for Drilling Purposes - Dimensions First Edition
Jig Bushes - Definitions and Nomenclature First Edition
Motorcycle Tyres and Rims (Code Designated Series) - Part 1: Tyres Second Edition
Motorcycle Tyres and Rims (Code-Designated Series) - Part 2: Tyre Load Ratings Second Edition
Motorcycle Tyres and Rims (Code-Designated Series) - Part 3: Rims Fifth Edition
Earth-mover tyres and rims Part 1: Tyre designation and dimensions Fourth Edition
Earth-mover tyres and rims Part 2: Loads and inflation pressures Fourth Edition
Earth-mover tyres and rims Part 3: Rims Third Edition
Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 1: Tyre designation and dimensions, and
approved rim contours Sixth Edition
Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 2: Tyre load ratings Sixth Edition
Tyres (Ply Rating Marked Series) and Rims for Agricultural Tractors and Machines - Part 3: Rims Fourth Edition
Tyres (Ply Rating Marked Series) and Rims for Agricultural Tractors and Machines - Part 4: Tyre Classification and Nomenclature
Second Edition
Tyres (Ply Rating Marked Series) and Rims for Agricultural Tractors and Machines - Part 5: Log Skidder Tyres Second Edition;
Amendment 1-1998
Agricultural Tractors - Operator s Workplace, Access and Exit - Dimensions Second Edition
Agricultural Tractors - Operator s Seating Accommodation - Dimensions Second Edition
Agricultural machinery Safety Part 1: General requirements Third Edition
Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety - Part 3: Tractors First Edition
Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety - Part 5: Power-Driven Soil-Working
Equipment First Edition
Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety - Part 6: Equipment for Crop Protection
First Edition; (Corrected and Reprinted - 1996)
Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety - Part 7: Combine Harvesters, Forage and
Cotton Harvesters First Edition
ISO
ISO
ISO
ISO
ISO
4254-9
4256
4257
4259
4260
ISO
ISO
4261
4262
ISO
4263-1
ISO
4263-2
ISO
4263-3
ISO
ISO
4263-4
4264
ISO
4266-1
ISO
4266-2
ISO
4266-3
ISO
4266-4
ISO
4266-5
ISO
4266-6
ISO
ISO
4267-2
4268
ISO
4269
Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety - Part 9: Equipment for Sowing, Planting
and Distributing Fertilizers First Edition
Liquefied Petroleum Gases - Determination of Gauge Vapour Pressure - LPG Method Second Edition
Liquefied Petroleum Gases - Method of Sampling Second Edition
Petroleum Products - Determination and Application of Precision Data in Relation to Methods of Test Third Edition
Petroleum Products and Hydrocarbons - Determination of Sulfur Content - Wickbold Combustion Method First Edition
Petroleum Products - Fuels (Class F) - Specification of Gas Turbine Fuels for Industrial and Marine Applications First Edition
Petroleum Products - Determination of Carbon Residue - Ramsbottom Method Second Edition
Petroleum and Related Products - Determination of the Ageing Behaviour of Inhibited Oils and Fluids - TOST Test - Part 1: Procedure
for Mineral Oils First Edition; Replaces ISO 4263
Petroleum and Related Products - Determination of the Ageing Behaviour of Inhibited Oils and Fluids - TOST Test Part 2: Procedure
for Category HFC Hydraulic Fluids First Edition; Replaces ISO 4263
Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 3: Anhydrous
procedure for synthetic hydraulic fluids First Edition
Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 4: Procedure for
industrial gear oils First Edition
Petroleum Products - Calculation of Cetane Index of Middle-Distillate Fuels by the Four-Variable Equation Second Edition
Petroluem and Liquid Petroleum Products - Measurement of Level and Temperature in Storage Tanks by Automatic Methods - Part 1:
Meassurement of Level in Atmospheric Tanks First Edition
Petroleum and Liquid Petroleum Products - Measurement of Level and Temperature in Storage Tanks by Automatic Methods - Part 2:
Measurement of Level in Marine Vessels First Edition
Petroleum and Liquid Petroleum Products - Measurement of Level and Temperature in Storage Tanks by Automatic Methods - Part 3:
Measurement of Level in Pressurized Storage Tanks (Non-Refrigerated) First Edition
Petroleum and Liquid Petroleum Products - Measurement of Level and Temperature in Storage Tanks by Automatic Methods - Part 4:
Measurement of Temperature in Atmospheric Tanks First Edition
Petroleum and Liquid Petroleum Products - Measurement of Level and Temperature in Storage Tanks by Automatic Methods - Part 5:
Measurement of Temperature in Marine Vessels First Edition
Petroleum and Liquid Petroleum Products - Measurement of Level and Temperature in Storage Tanks by Automatic Methods - Part 6:
Measurement of Temperature in Pressurized Storage Tanks (Non-Refrigerated) First Edition
Petroleum and Liquid Petroleum Products - Calculation of Oil Quantities - Part 2: Dynamic Measurement First Edition; (CEN EN ISO
4267-2)
Petroleum and Liquid Petroleum Products - Temperature Measurements - Manual Methods First Edition
Petroleum and Liquid Petroleum Products - Tank Calibration by Liquid Measurement - Incremental Method Using Volumetric Meters
First Edition
ISO
4280
ISO
ISO
ISO
ISO
4281
4282
4283
4284
ISO
4287
ISO
ISO
ISO
4288
4291
4292
ISO
4293
ISO
4294
ISO
ISO
ISO
ISO
4295
4296-1
4296-2
4297
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4298
4299
4301-1
4301-2
4301-3
4301-4
4301-5
4302
4304
4305
4306-1
4306-2
Cryolite, Natural and Artificial, and Aluminium Fluoride for Industrial Use - Determination of Sulphate Content - Barium Sulphate
Gravimetric Method First Edition; (Erratum-1978)
Sodium Hexafluorosilicate for Industrial Use - Determination of Free Acidity and Total Hexafluorosilicate Content - Titrimetric Method
First Edition
Acid-Grade and Ceramic-Grade Fluorspar - Determination of Loss in Mass at 105 Degrees C Second Edition
Grades of Fluorspar - Determination of Carbonate Content - Titrimetric Method Third Edition
Acid-Grade and Ceramic-Grade Fluorspar - Determination Sulfide Content - Iodometric Iodometric Method Third Edition
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Terms, Definitions and Surface Texture Parameters
Specification Geometrique Des Produits (GPS) - Etat De Surface: Methode Du Profil - Termes, Definitions Et Parametres D'Etat De
Surface First Edition; Technical Corrigendum 1-1998; Corrigendum 2: 2/15/2005
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Rules and Procedures for the Assessment of Surface
Texture Second Edition; Technical Corrigendum 1: 06/15/1998
Methods for the Assessment of Departure from Roundness - Measurement of Variations in Radius First Edition
Methods for the Assessment of Departure from Roundness - Measurement by Two- and Three-Point Methods First Edition
Manganese Ores and Concentrates - Determination of Phosphorus Content - Extraction- Molybdovanadate Photometric Method Firts
Edition; Replaces ISO R 321: 1963
Manganese Ores and Concentrates - Determination of Copper Content - Extraction- Spectrometric and Spectrometric Methods
Second Edition; Replaces ISO R 322: 1978
Manganese Ores and Concentrates - Determination of Aluminium Content - Photometric and Gravimetric Methods Second Edition;
Replaces ISO R 318: 1963
Manganese Ores - Sampling - Part 1: Increment Sampling First Edition
Manganese Ores - Sampling - Part 2: Preparation of Samples First Edition
Manganese Ores and Concentrates - Methods of Chemical Analysis - General Instructions First Edition
Manganese Ores and Concentrates - Determination of Manganese Content - Potentiometric Method Second Edition; Replaces ISO R
319: 1963
Manganese Ores - Determination of Moisture Content Second Edition
Cranes and Lifting Appliances - Classification - Part 1: General Second Edition
Lifting Appliances - Classification - Part 2: Mobile Cranes First Edition
Cranes - Classification - Part 3: Tower Cranes First Edition
Cranes and Related Equipment - Classification - Part 4: Jib Cranes First Edition
Cranes - Classification - Part 5: Overhead Travelling and Portal Bridge Cranes First Edition
Cranes - Wind Load Assessment First Edition
Cranes Other Than Mobile and Floating Cranes - General Requirements for Stability First Edition
Mobile Cranes - Determination of Stability Second Edition
Cranes - Vocabulary - Part 1: General Third Edition
Cranes - Vocabulary - Part 2: Mobile Cranes Second Edition
ISO
4306-3
ISO
ISO
ISO
ISO
ISO
4306-5
4308-1
4308-2
4309
4310
ISO
4311
ISO
4312
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4313
4314
4315
4316
4317
4318
4319
4320
4321
4322
4323
4324
4325
ISO
4326
ISO
ISO
4327
4337
ISO
ISO
4341
4342
Cranes - Vocabulary - Part 3: Tower Cranes Third Edition
Cranes - Vocabulary - Part 5: Bridge and gantry cranes Appareils de levage Ó charge suspendue Vocabulaire Partie 5: Ponts et
portiques roulants First Edition
Cranes and Lifting Appliances - Selection of Wire Ropes - Part 1: General Third Edition
Cranes and Lifting Appliances - Selection of Wire Ropes - Part 2: Mobile Cranes - Coefficient of Utilization First Edition
Cranes Wire ropes Care, maintenance, installation, examination and discard Third Edition
Cranes - Test Code and Procedures First Edition
Anionic and Non-Ionic Surface Active Agents - Determination of the Critical Micellization Concentration - Method by Measuring
Surface Tension with a Plate, Stirrup or Ring First Edition
Surface Active Agents - Evaluation of Certain Effects of Laundering - Methods of Analysis and Test for Unsoiled Cotton Control Cloth
Second Edition
Washing Powders - Determination of Total Phosphorus (V) Oxide Content - Quinoline Phosphomolybdate Gravimetric Method First
Edition
Surface Active Agents - Determination of Free Alkalinity or Free Acidity - Titrimetric Method First Edition
Surface Active Agents - Determination of Alkalinity - Titrimetric Method First Edition
Surface Active Agents - Determination of pH of Aqueous Solutions - Potentiometric Method First Edition
Surface-Active Agents and Detergents - Determination of Water Content - Karl Fischer Method Second Edition
Surface Active Agents and Soaps - Determination of Water Content - Azeotropic Distillation Method Second Edition
Surface Active Agents - Detergents for Washing Fabrics - Guide for Comparative Testing of Performance First Edition
Non-Ionic Surface Active Agents - Determination of Cloud Point Index - Volumetric Method First Edition; (Erratum-1980)
Washing Powders - Determination of Active Oxygen Content - Titrimetric Method First Edition
Non-Ionic Surface Active Agents - Determination of Sulphated Ash - Gravimetric Method First Edition
Soaps - Determination of Chloride Content - Potentiometric Method First Edition
Surface Active Agents - Powders and Granules - Measurement of the Angle of Repose First Edition
Soaps and Detergents - Determination of Chelating Agent Content - Titrimetric Method Second Edition
Non-Ionic Surface Active Agents - Polyethoxylated Derivatives - Determination of Hydroxyl Value - Acetic Anhydride Method First
Edition
Non-Ionic Surface Active Agents - Polyalkoxylated Derivatives - Determination of Hydroxyl Value - Phthalic Anhydride Method First
Edition; (Erratum-1980)
Information Processing - Interchangeable Magnetic Twelve-Disk Pack (100 Mbytes) First Edition
Information Processing - Magnetic Tape Cassette and Cartridge Labelling and File Structure for Information Interchange First Edition;
(ANSI 4341-1978)
Numerical Control of Machines - NC Processor Input - Basic Part Program Reference Language First Edition
ISO
ISO
4343
4344
Industrial Automation Systems - Numerical Control of Machines - NC Processor Output - Post-Processor Commands Second Edition
Steel wire ropes for lifts Minimum requirements Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
4345
4346
4347
4348
4354
4355
Steel Wire Ropes - Fibre Main Cores - Specification Second Edition
Steel Wire Ropes for General Purposes - Lubricants - Basic Requirements First Edition
Leaf chains, clevises and sheaves Dimensions, measuring forces and tensile strengths Fourth Edition
Flat-Top Chains and Associated Chain Wheels for Conveyors Second Edition
Wind Actions on Structures First Edition
Bases for Design of Structures - Determination of Snow Loads on Roofs Second Edition
ISO
4356
ISO
ISO
4359
4360
ISO
4362
Bases for the Design of Structures - Deformations of Buildings at the Serviceability Limit States First Edition; (PNS 1091: 1992)
Liquid Flow Measurement in Open Channels - Rectangular, Trapezoidal and U-Shaped Flumes First Edition; Technical Corrigendum
1: 10/01/1999 [Superseded: BSI BS 3680 PART 4C]
Liquid Flow Measurement in Open Channels by Weirs and Flumes - Triangular Profile Weirs Second Edition
Hydrometric Determinations - Flow Measurement in Open Channels Using Structures - Trapezoidal Broad-Crested Weirs Second
Edition
ISO
4363
Measurement of liquid flow in open channels Methods for measurement of characteristics of suspended sediment Third Edition
ISO
4364
ISO
ISO
ISO
4365
4366
4369
ISO
ISO
ISO
ISO
ISO
4371
4373
4374
4375
4377
ISO
ISO
ISO
4378-1
4378-2
4378-3
Measurement of Liquid Flow in Open Channels - Bed Material Sampling Second Edition; Technical Corrigendum 1: 08/01/2000
Liquid flow in open channels Sediment in streams and canals Determination of concentration, particle size distribution and relative
density Second Edition
Hydrometry ù Echo Sounders For Water Depth Measurements Second Edition
Measurement of Liquid Flow in Open Channels - Moving-Boat Method First Edition
Measurement of Liquid Flow in Open Channels by Weirs and Flumes - End Depth Method for Estimation of Flow in Non-Rectangular
Channels with a Free Overfall (Approximate Method) First Edition
Measurement of Liquid Flow in Open Channels - Water-Level Measuring Devices Second Edition
Liquid Flow Measurement in Open Channels - Round-Nose Horizontal Broad-Crested Weirs Second Edition
Hydrometric Determinations - Cableway Systems for Stream Gauging Second Edition
Hydrometric Determinations - Flow Measurement in Open Channels Using Structures - Flat-V Weirs Third Edition
Plain Bearings - Terms, Definitions and Classification - Part 1: Design, Bearing Materials and Their Properties Paliers Lisses Termes, Definitions Et Classification - Partie 1: Conception, Materiaux Pour Paliers Et Leurs Proprietes Second Edition; Corrected
and Reprinted 02/15/1999
Plain Bearings - Terms, Definitions and Classification - Part 2: Friction and Wear First Edition
Plain Bearings - Terms, Definitions and Classification - Part 3: Lubrication First Edition
ISO
ISO
4378-4
4379
Plain Bearings - Terms, Definitions and Classification - Part 4: Calculation Parameters and Their Symbol Paliers Lisses - Termes,
Definitions Et Classification - Partie 4: Parametres De Calcul Et Leur Symbole First Edition; Corrected and Reprinted, 10/01/1998
Plain Bearings - Copper Alloy Bushes Second Edition (Corrected and Reprinted - 1995)
ISO
4381
Plain Bearings - Lead and Tin Casting Alloys for Multilayer Plain Bearings Third Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4382-1
4382-2
4383
4384-1
4384-2
4385
4386-1
ISO
ISO
4386-2
4386-3
ISO
4387
Plain Bearings - Copper Alloys - Part 1: Cast Copper Alloys for Solid and Multilayer Thick- Walled Plain Bearings Second Edition
Plain Bearings - Copper Alloys - Part 2: Wrought Copper Alloys for Solid Plain Bearings Second Edition
Plain Bearings - Multilayer Materials for Thin-Walled Plain Bearings Third Edition
Plain Bearings - Hardness Testing of Bearing Metals - Part 1: Compound Materials Second Edition
Plain Bearings - Hardness Testing of Bearing Metals - Part 2: Solid Materials First Edition
Plain Bearings - Compression Testing of Metallic Bearing Materials First Edition
Plain Bearings - Metallic Multilayer Plain Bearings - Part 1: Non-Destructive Ultrasonic Testing of Bond Second Edition
Plain Bearings - Metallic Multilayer Plain Bearings - Part 2: Destructive Testing of Bond for Bearing Metal Layer Thicknesses Greater
Than or Equal to 2 mm First Edition
Plain Bearings - Metallic Multilayer Plain Bearings - Part 3: Non-Destructive Penetrant Testing First Edition
Cigarettes - Determination of Total and Nicotine-Free Dry Particulate Matter Using a Routine Analytical Smoking Machine Third
Edition
ISO
4388
Cigarettes - Determination of the Smoke Condensate Retention Index of a Filter - Direct Spectrometric Method Second Edition
ISO
4389
Tobacco and Tobacco Products - Determination of Organochlorine Pesticide Residues - Gas Chromatographic Method Third Edition
ISO
4391
ISO
ISO
4392-1
4392-2
Hydraulic Fluid Power - Pumps, Motors and Integral Transmissions - Parameter Definitions and Letter Symbols Second Edition
Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 1: At Constant Low Speed and at Constant Pressure Third
Edition
Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 2: Startability Third Edition
ISO
ISO
4392-3
4393
ISO
ISO
4394-1
4395
ISO
ISO
4397
4399
ISO
ISO
4400
4401
Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 3: At Constant Flow and at Constant Torque First Edition
Fluid Power Systems and Components - Cylinders - Basic Series of Piston Strokes First Edition
Fluid Power Systems and Components - Cylinder Barrels - Part 1: Requirements for Steel Tubes with Specially Finished Bores First
Edition
Fluid Power Systems and Components - Cylinders - Piston Rod Thread Dimensions and Types First Edition
Fluid Power Systems and Components - Connectors and Associated Components - Nominal Outside Diameters of Tubes and
Nominal Inside Diameters of Hoses Second Edition
Fluid Power Systems and Components - Connectors and Associated Components - Nominal Pressures Second Edition
Fluid Power Systems and Components - Three-Pin Electrical Plug Connectors with Earth Contact - Characteristics and Requirements
Third Edition
Hydraulic fluid power - Four-port directional control valves - Mounting surfaces Third Edition
ISO
4404-1
ISO
4404-2
ISO
ISO
4405
4406
ISO
4407
ISO
ISO
4409
4411
ISO
ISO
4412-1
4412-2
ISO
ISO
ISO
ISO
4412-3
4413
4414
4415
ISO
ISO
ISO
4416
4417
4418
ISO
4422-1
ISO
4422-2
ISO
4422-3
ISO
4422-4
ISO
4422-5
Petroleum and Related Products - Determination of the Corrosion Resistance of Fire-Resistant Hydraulic Fluids - Part 1: WaterContaining Fluids First Edition; Replaces ISO 4404
Petroleum and related products Determination of the corrosion resistance of fire-resistant hydraulic fluids Part 2: Non-aqueous fluids
First Edition; Replaces ISO 4404
Hydraulic Fluid Power - Fluid Contamination - Determination of Particulate Contamination by the Gravimetric Method First Edition
Supersedes (NFPA) T2.9.14
Hydraulic Fluid Power - Fluids - Method for Coding the Level of Contamination by Solid Particles Second Edition
Hydraulic Fluid Power - Fluid Contamination - Determination of Particulate Contamination by the Counting Method Using an Optical
Microscope Second Edition
Hydraulic fluid power ù Positive-displacement pumps, motors and integral transmissions ù Methods of testing and presenting basic
steady state performance Second Edition
Hydraulic Fluid Power - Valves - Determination of Pressure Differential/Flow Characteristics First Edition
Hydraulic Fluid Power - Test Code for Determination of Airborne Noise Levels - Part 1: Pumps Second Edition Supersedes (NFPA)
B93.71M
Hydraulic Fluid Power - Test Code for Determination of Airborne Noise Levels - Part 2: Motors Second Edition
Hydraulic Fluid Power - Test Code for Determination of Airborne Noise Levels - Part 3: Pumps - Method Using a Parallelepiped
Microphone Array First Edition
Hydraulic Fluid Power - General Rules Relating to Systems Second Edition
Pneumatic Fluid Power - General Rules Relating to Systems Second Edition
Size Designation of Clothes - Men s and Boys Underwear, Nightwear and Shirts First Edition; Corrigendum 1: 1990
Size Designation of Clothes - Women s and Girls Underwear, Nightwear, Foundation Garments and Shirts First Edition;
Corrigendum 1: 1990
Size Designation of Clothes - Headwear First Edition; Amendment Slip: 12-15-1977; Amendment Slip: 05-01-1978
Size Designation of Clothes - Gloves First Edition
Pipes and Fittings Made of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Water Supply - Specifications - Part 1: General First
Edition; Supersedes ISO 4422: 1990
Pipes and Fittings Made of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Water Supply - Specifications - Part 2: Pipes (With or
Without Integral Sockets) First Edition
Pipes and Fittings Made of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Water Supply - Specifications - Part 3: Fittings and Joints
First Edition; Supersedes ISO 4422: 1990
Pipes and Fittings Made of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Water Supply - Specifications - Part 4: Valves and Ancillary
Equipment First Edition; Supersedes ISO 4422: 1990
Pipes and Fittings Made of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Water Supply - Specifications - Part 5: Fitness for Purpose
of the System First Edition; Supersedes ISO 4422: 1990
ISO
4427-2
Plastics piping systems ù Polyethylene (PE) pipes and fittings for water supply ù Part 2: Pipes First Edition [Replaced: ISO 4427]
ISO
4427-3
Plastics piping systems ù Polyethylene (PE) pipes and fittings for water supply ù Part 3: Fittings First Edition
ISO
4427-5
ISO
4433-1
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system First Edition
Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification - Part 1: Immersion Test Method First Edition; Replaces ISO
4433
ISO
4433-2
Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification - Part 2: Polyolefin Pipes First Edition; Replaces ISO 4433
ISO
4433-3
ISO
4433-4
ISO
4434
ISO
ISO
ISO
ISO
ISO
4435
4437
4439
4440-1
4440-2
ISO
ISO
4463-1
4463-2
ISO
ISO
ISO
ISO
4463-3
4468
4469
4470
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4471
4472
4473
4474
4475
4476
4480
Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification - Part 3: Unplasticized Poly(Vinyl Chloride) (PVC-U), HighImpact Poly(Vinyl Chloride) (PVC-HI) and Chlorinated Poly(Vinyl Chloride) (PVC-C) Pipes First Edition; Replaces ISO 4433
Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification - Part 4: Poly(Vinylidene Fluoride) (PVDF) Pipes First Edition;
Replaces ISO 4433
Unplasticized Polyvinyl Chloride (PVC) Adaptor Fittings for Pipes Under Pressure - Laying Length and Size of Threads - Metric Series
First Edition
Plastics piping systems for non-pressure underground drainage and sewerage Unplasticized poly(vinyl chloride) (PVC-U) Secon
Edition
Buried polyethylene (PE) pipes for the supply of gaseous fuels ù Metric series ù Specifications Third Edition
Unplasticized Polyvinyl Chloride (PVC) Pipes and Fittings - Determination and Specification of Density First Edition
Thermoplastics Pipes and Fittings - Determination of Melt Mass-Flow Rate - Part 1: Test Method First Edition
Thermoplastics Pipes and Fittings - Determination of Melt Mass-Flow Rate - Part 2: Test Conditions First Edition
Measurement Methods for Building - Setting-Out and Measurement - Part 1: Planning and Organization, Measuring Procedures,
Acceptance Criteria First Edition
Measurement Methods for Building - Setting-Out and Measurement - Part 2: Measuring Stations and Targets First Edition
Measurement Methods for Building - Setting-Out and Measurement - Part 3: Check-Lists for the Procurement of Surveys and
Measurement Services First Edition
Gear Hobs - Single Start - Accuracy Requirements First Edition
Wood - Determination of Radial and Tangential Shrinkage First Edition
Sawn Timber - Determination of the Average Moisture Content of a Lot First Edition; (PNS 1007: 1989)
Wood - Sampling Sample Trees and Logs for Determination of Physical and Mechanical Properties of Wood in Homogeneous
Stands First Edition
Coniferous and Broadleaved Sawn Timber - Transportation Packages First Edition
Coniferous and Broadleaved Tree Sawlogs - Visible Defects - Classification First Edition
Coniferous and Broadleaved Tree Sawlogs - Visible Defects - Terms and Definitions First Edition
Coniferous and Broadleaved Tree Sawlogs - Visible Defects - Measurement First Edition
Coniferous and Broadleaved Sawlogs - Sizes - Vocabulary First Edition
Coniferous Sawlogs - Measurement of Sizes and Determination of Volume First Edition
ISO
ISO
ISO
4481
4489
4490
ISO
4491-1
ISO
4491-2
ISO
4491-3
ISO
4491-4
ISO
4492
ISO
ISO
4496
4497
ISO
ISO
ISO
4498
4499
4501
ISO
ISO
ISO
4503
4505
4506
ISO
ISO
ISO
4507
4510-1
4510-2
ISO
ISO
ISO
4512
4513
4516
ISO
4518
ISO
4519
Cutlery and Flatware - Nomenclature First Edition; (PNS 889: 1993)
Sintered Hardmetals - Sampling and Testing First Edition; (CEN EN 24489: 1993)
Metallic Powders - Determination of Flow Time by Means of a Calibrated Funnel (Hall Flowmeter) Second Edition
Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 1: General Guidelines First Edition; (CEN EN
24491-1: 1993)
Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 2: Loss of Mass on Hydrogen Reduction
(Hydrogen Loss) Second Edition
Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 3: Hydrogen-Reducible Oxygen Second Edition
Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 4: Total Oxygen by Reduction-Extraction First
Edition; (CEN EN 24491-4: 1993)
Metallic Powders, Excluding Powders for Hardmetals - Determination of Dimensional Changes Associated with Compacting and
Sintering Second Edition; (CEN EN 24492: 1993)
Metallic Powders - Determination of Acid-Insoluble Content in Iron, Copper, Tin and Bronze Powders First Edition; (CEN EN 24496:
1993)
Metallic Powders - Determination of Particle Size by Dry Sieving First Edition; (CEN EN 24497: 1993)
Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness First edition; Cancels and
Replaces ISO 4498-1: 1990 and ISO 4498-2: 1981
Hardmetals - Metallographic Determination of Microstructure First Edition; (CEN EN 24499: 1993)
Hardmetals - Determination of Titanium - Photometric Peroxide Method First Edition; (CEN EN 24501: 1993)
Hardmetals - Determination of Contents of Metallic Elements by X-Ray Fluorescence - Fusion Method First Edition; (CEN EN 24503:
1993)
Hardmetals - Metallographic Determination of Porosity and Uncombined Carbon First Edition; (CEN EN 24505: 1993)
Hardmetals - Compression Test First Edition; (CEN EN 24506:1993)
Sintered Ferrous Materials, Carburized or Carbonitrided - Determination and Verification of Case-Hardening Depth by a MicroHardness Test Second Edition
Earth-Moving Machinery - Service Tools - Part 1: Common Maintenance and Adjustment Tools Second Edition
Earth-Moving Machinery - Service Tools - Part 2: Mechanical Pullers and Pushers Second Edition
Petroleum and Liquid Petroleum Products - Equipment for Measurement of Liquid Levels in Storage Tanks - Manual Methods First
Edition
Road vehicles Visibility Method for establishment of eyellipses for driver s eye location Second Edition
Metallic and Other Inorganic Coatings - Vickers and Knoop Microhardness Tests Second Edition
Metallic Coatings - Measurement of Coating Thickness - Profilometric Method First Edition; (CEN EN ISO 4518: 1995) (PNS 679:
1990)
Electrodeposited Metallic Coatings and Related Finishes - Sampling Procedures for Inspection by Attributes First Edition; (Erratum1981) (PNS 674: 1990)
ISO
ISO
4520
4521
Chromate Conversion Coatings on Electroplated Zinc and Cadmium Coatings First Edition; (PNS 680: 1990)
Metallic Coatings - Electrodeposited Silver and Silver Alloy Coatings for Engineering Purposes First Edition
Metallic Coatings - Test Methods for Electrodeposited Silver and Silver Alloy Coatings - Part 1: Determination of Coating Thickness
First Edition
Metallic Coatings - Test Methods for Electrodeposited Silver and Silver Alloy Coatings - Part 2: Adhesion Tests First Edition
Metallic Coatings - Test Methods for Electrodeposited Silver and Silver Alloy Coatings - Part 3: Determination of the Presence of
Residual Salts First Edition
Metallic Coatings - Electrodeposited Gold and Gold Alloy Coatings for Engineering Purposes First Edition
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 1: Determination of Coating Thickness
First Edition
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 2: Mixed Flowing Gas (MFG)
Environmental Tests Second Edition
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 3: Electrographic Tests for Porosity First
Edition; (Corrected and Reprinted - 1986)
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 4: Determination of Gold Content First
Edition
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 5: Adhesion Tests First Edition
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 6: Determination of the Presence of
Residual Salts First Edition; (CEN EN ISO 4524-6: 1994)
Metallic Coatings - Electroplated Coatings of Nickel Plus Chromium on Plastics Materials Second Edition
Metallic coatings Electroplated coatings of nickel for engineering purposes Second Edition
ISO
ISO
4522-1
4522-2
ISO
ISO
4522-3
4523
ISO
4524-1
ISO
4524-2
ISO
4524-3
ISO
ISO
4524-4
4524-5
ISO
ISO
ISO
4524-6
4525
4526
ISO
4527
ISO
ISO
4528
4530
ISO
4531-1
ISO
4531-2
ISO
4532
Vitreous and Porcelain Enamels - Determination of the Resistance of Enamelled Articles to Impact - Pistol Test First Edition
ISO
ISO
4533
4534
Vitreous and Porcelain Enamels - Determination of Resistance to Hot Detergent Solutions Used for Washing Textiles First Edition
Vitreous and Porcelain Enamels - Determination of Fluidity Behaviour - Fusion Flow Test First Edition
Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods Second Edition
Vitreous and Porcelain Enamel Finishes - Selection of Test Methods for Vitreous and Porcelain Enamelled Areas of Articles First
Edition
Vitreous and Porcelain Enamelled Manufactured Articles - Determination of Resistance to Heat First Edition
Vitreous and Porcelain Enamels - Release of Lead and Cadmium from Enamelled Ware in Contact with Food - Part 1: Method of
Test First Edition
Vitreous and Porcelain Enamels - Release of Lead and Cadmium from Enamelled Ware in Contact with Food - Part 2: Permissible
Limits First Edition
ISO
ISO
ISO
ISO
ISO
4535
4536
4538
4539
4541
ISO
ISO
4543
4545-1
ISO
ISO
ISO
4545-2
4545-3
4545-4
ISO
4548-1
ISO
4548-2
ISO
4548-3
ISO
4548-4
ISO
4548-5
ISO
4548-6
ISO
4548-7
ISO
4548-9
ISO
4548-11
ISO
ISO
4548-12
4551
ISO
4552-1
Vitreous and Porcelain Enamels - Apparatus for Determination of Resistance to Hot Detergent Solutions Used for Washing Textiles
First Edition
Metallic and Non-Organic Coatings on Metallic Substrates - Saline Droplets Corrosion Test (SD Test) First Edition
Metallic Coatings - Thioacetamide Corrosion Test (TAA Test) First Edition; (CEN EN ISO 4538: 1995)
Electrodeposited Chromium Coatings - Electrolytic Corrosion Testing (EC Test) First Edition
Metallic and Other Non-Organic Coatings - Corrodkote Corrosion Test (CORR Test) First Edition; (CEN EN ISO 4541: 1994)
Metallic and Other Non-Organic Coatings - General Rules for Corrosion Tests Applicable for Storage Conditions First Edition; (CEN
EN ISO 4543: 1994)
Metallic materials Knoop hardness test Part 1: Test method First Edition; Replaces ISO 4545: 1993
Metallic materials Knoop hardness test Part 2: Verification and calibration of testing machines First Edition; Replaces ISO
4546:1993
Metallic materials Knoop hardness test Part 3: Calibration of reference blocks First Edition; Replaces ISO 4547: 1993
Metallic materials Knoop hardness test Part 4: Table of hardness values First Edition; Replaces ISO 10250: 1994
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 1: Differential Pressure/Flow
Characteristics First Edition
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 2: Element By-Pass Valve Characteristics
Second Edition
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 3: Resistance to High Pressure and to
Elevated Temperature Second Edition
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 4: Initial Particle Retention Efficiency, Life
and Cumulative Efficiency (Gravimetric Method) First Edition
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 5: Cold Start Simulation and Hydraulic
Pulse Durability Test First Edition
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 6: Static Burst Pressure Test First Edition;
Corrigendum 1-1990
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 7: Vibration Fatigue Test First Edition
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 9: Inlet and Outlet Anti-Drain Valve Tests
First Edition;
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 11: Self-Cleaning Filters First Edition
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 12: Filtration Efficiency Using Particle
Counting, and Contaminant Retention Capacity First Edition
Ferroalloys - Sampling and Sieve Analysis First Edition; (Corrected and Reprinted - 1988)
Ferroalloys - Sampling and Sample Preparation for Chemical Analysis - Part 1: Ferrochromium, Ferrosilicochromium, Ferrosilicon,
Ferrosilicomanganese, Ferromanganese First Edition
Ferroalloys - Sampling and Sample Preparation for Chemical Analysis - Part 2: Ferrotitanium, Ferromolybdenum, Ferrotungsten,
Ferroniobium, Ferrovanadium First Edition
Small Craft with Inboard Engine - Propeller Shaft Ends and Bosses with 1:10 Taper Second Edition
Shipbuilding Sea-going vessels Windlasses and anchor capstans Third Edition
Tyre Valve Threads Filetages De Valves Pour Pneumatiques First Edition; Replaces ISO 4570-1, 4570-2 and 4570-3
Manganese Ores and Concentrates - Determination of Potassium and Sodium Content - Flame Atomic Emission Spectrometric
Method First Edition
Plastics - PVC Resins for General Use - Determination of Hot Plasticizer Absorption First Edition
Plastics ù Poly(vinyl chloride) pastes ù Determination of apparent viscosity using the Severs rheometer Third Edition
Plastics - Polymer Dispersions - Determination of Sieve Residue (Gross Particle and Coagulum Content) Second Edition
ISO
ISO
ISO
ISO
4552-2
4566
4568
4570
ISO
ISO
ISO
ISO
4571
4574
4575
4576
ISO
ISO
4577
4578
ISO
4581
ISO
4582
ISO
4586-1
High-pressure decorative laminates Sheets made from thermosetting resins Part 1: Classification and specifications Fifth Edition
ISO
4586-2
ISO
ISO
4587
4589-1
ISO
4589-2
ISO
ISO
4589-3
4590
ISO
ISO
ISO
ISO
ISO
ISO
4591
4592
4593
4597-1
4602
4603
High-pressure decorative laminates Sheets made from thermosetting resins Part 2: Determination of properties Fifth Edition
Adhesives - Determination of Tensile Lap-Shear Strength of Rigid-to-Rigid Bonded Assemblies Third Edition [Replaced: GME GME
60432, GME GME 60432]
Plastics - Determination of Burning Behavior by Oxygen Index Part 1: Guidance First Edition
Plastics Determination of burning behaviour by oxygen index Part 2: Ambient-temperature test First Edition; Amendment 1:
01/15/2005
Plastics - Determination of Burning Behaviour by Oxygen Index - Part 3: Elevated-Temperature Test First Edition; CEN EN ISO 45893: 1996
Rigid Cellular Plastics - Determination of the Volume Percentage of Open Cells and of Closed Cells Second Edition
Plastics - Film and Sheeting - Determination of Average Thickness of a Sample, and Average Thickness and Yield of a Roll, by
Gravimetric Techniques (Gravimetric Thickness) Second Edition
Plastics - Film and Sheeting - Determination of Length and Width Second Edition
Plastics - Film and Sheeting - Determination of Thickness by Mechanical Scanning Second Edition
Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation Second Edition
Reinforcements - Woven Fabrics - Determination of Number of Yarns per Unit Length of Warp and Weft Second Edition
Textile Glass - Woven Fabrics - Determination of Thickness Second Edition
Plastics - Polypropylene and Propylene-Copolymers - Determination of Thermal Oxidative Stability in Air - Oven Method First Edition
Adhesives - Determination of Peel Resistance of High-Strength Adhesive Bonds - Floating Roller Method Third Edition
Plastics - Styrene/Acrylonitrile Copolymers - Determination of Residual Acrylonitrile Monomer Content - Gas Chromatography Method
Second Edition
Plastics - Determination of Changes in Colour and Variations in Properties After Exposure to Daylight Under Glass, Natural
Weathering or Laboratory Light Sources Second Edition
ISO
4604
Textile Glass - Woven Fabrics - Determination of Conventional Flexural Stiffness - Fixed-Angle Flexometer Method First Edition
ISO
4606
ISO
4608
Textile Glass - Woven Fabric - Determination of Tensile Breaking Force and Elongation at Break by the Strip Method Second Edition
Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride for General Use - Determination of Plasticizer Absorption at Room
Temperature Third Edition
ISO
ISO
ISO
4610
4611
4612
Plastics - Vinyl Chloride Homopolymer and Copolymer Resins - Sieve Analysis Using Air-Jet Sieve Apparatus Second Edition
Plastics - Determination of the Effects of Exposure to Damp Heat, Water Spray and Salt Mist Second Edition
Plastics - Preparation of PVC Pastes for Test Purposes - Planetary-Mixer Method Second Edition
ISO
4613-1
ISO
ISO
ISO
4613-2
4614
4615
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4618
4619
4620
4621
4622
4623-1
4623-2
4624
Plastics - Ethylene/Vinyl Acetate (E/VAC) Moulding and Extrusion Materials - Part 1: Designation and Specification Second Edition
Plastics - Ethylene/Vinyl Acetate (E/VAC) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and
Determination of Properties Second Edition; (CEN EN ISO 4613-2: 1995) Second Editon; Amendment 1:06/15/2004
Plastics - Malamine-Formaldehyde Moulding - Determination of Extractable Formaldehyde First Edition
Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content First Edition
Paints and varnishes Terms and definitions Peintures et vernis Termes et dÚfintions First Edition; Replaces ISO 4618-1:1998, ISO
4618-2:1999 and ISO 4618-3:1999
Driers for Paints and Varnishes Second Edition
Cadmium Pigments - Specifications and Methods of Test First Edition
Chrome Oxide Green Pigments - Specifications and Methods of Test First Edition
Paints and Varnishes - Pressure Test for Stackability Second Edition; (CEN EN ISO 4622)
Paints and Varnishes - Determination of Resistance to Filiform Corrosion - Part 1: Steel Substrates First Edition
Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates First Edition
Paints and Varnishes - Pull-Off Test for Adhesion Second Edition
ISO
4625-1
Binders for paints and varnishes Determination of softening point Part 1:Ring-and-ball method First Edition; Replaces ISO 4625
ISO
ISO
4625-2
4626
ISO
4628-1
ISO
4628-2
ISO
4628-3
Binders for paints and varnishes Determination of softening point Part 2:Cup-and-ball method First Edition; Replaces ISO 4625
Volatile Organic Liquids - Determination of Boiling Range of Organic Solvents Used as Raw Materials First Edition
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform
changes in appearance Part 1: General introduction and designation system Third Edition
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform
changes in appearance Part 2: Assessment of degree of blistering Second Edition
Paints and Varnishes - Evaluation of Degradation of Paint Coatings - Designation of Intensity, Quantity and Size of Common Types of
Defect - Part 3: Designation of Degree of Rusting First Edition Second Edition
ISO
4628-4
ISO
4628-5
ISO
4628-6
ISO
4628-7
ISO
4628-8
ISO
ISO
4628-10
4629
ISO
ISO
4630-1
4630-2
ISO
4633
ISO
ISO
ISO
ISO
ISO
4635
4637
4638
4641
4642
ISO
4643
ISO
ISO
ISO
4645
4646
4647
ISO
ISO
ISO
4649
4650
4651
ISO
4652-1
Paints and Varnishes - Evaluation of Degradation of Coatings - Designation of Quantity and Size of Defects, and of Intensity of
Uniform Changes in Appearance - Part 4: Assessment of Degree of Cracking Second Edition
Paints and Varnishes - Evaluation of Degradation of Coatings - Designation of Quantity and Size of Defects, and of Intesity of
Uniform Changes in Appearance - Part 5: Assessment of Degree of Flaking Second Edition
Paints and varnishes ù Evaluation of degradation of coatings ù Designation of quantity and size of defects, and of intensity of uniform
changes in appearance ù Part 6: Assessment of degree of chalking by tape method Second Edition
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform
changes in appearance Part 7: Assessment of degree of chalking by velvet method First Edition
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform
changes in appearance Part 8: Assessment of degree of delamination and corrosion around a scribe First edition
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform
changes in appearance Part 10: Assessment of degree of filiform corrosion First Edition
Binders for Paints and Varnishes - Determination of Hydroxyl Value - Titrimetric Method Second Edition
Clear liquids Estimation of colour by the Gardner colour scale Part 1: Visual method First Edition; Cancels and Replaces ISO
4630:1997
Clear liquids Estimation of colour by the Gardner colour scale Part 2: Spectrophotometric method First Edition
Rubber Seals - Joint Rings for Water Supply, Drainage and Sewerage Pipelines - Specification for Materials Third Edition; Corrected
Version: 04/01/2004
Rubber, Vulcanized - Preformed Compression Seals for Use Between Concrete Motorway Paving Sections - Specification for
Material First Edition
Rubber-Coated Fabrics - Determination of Rubber-to-Fabric Adhesion - Direct Tension Method First Edition
Polymeric Materials, Cellular Flexible - Determination of Air Flow Permeability First Edition
Rubber hoses and hose assemblies for water suction and discharge - Specification Third Edition
Rubber Products - Hoses, Non-Collapsible, for Fire-Fighting Service First Edition
Moulded Plastics Footwear - Lined or Unlined Poly (Vinyl Chloride) Boots for General Industrial Use - Specification Second Edition
Rubber and Rubber Products - Guide to the Identification of Antidegradants - Thin Layer Chromatographic Methods First Edition;
Corrigendum 1: 1991
Rubber- or Plastics-Coated Fabrics - Low-Temperature Impact Test Second Edition
Rubber, Vulcanized - Determination of Static Adhesion to Textile Cord - H-Pull Test First Edition
Rubber, Vulcanized or Thermoplastic - Determination of Abrasion Resistance Using a Rotating Cylindrical Drum Device Second
Edition
Rubber - Identification - Infrared spectrometric method Second Edition
Cellular rubbers and plastics Determination of dynamic cushioning performance Second Edition; Amendment 1: 09/15/2006
Rubber Compounding Ingredients - Carbon Black - Determination of Specific Surface Area by Nitrogen Adsorption Methods - Part 1:
Single-Point Procedures First Edition
ISO
4655
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4656
4658
4659
4660
4661-2
4662
4664-1
ISO
ISO
4664-2
4665
ISO
4666-1
ISO
4666-2
ISO
ISO
ISO
ISO
ISO
ISO
4666-3
4671
4672
4674-1
4674-2
4675
Rubber - Reinforced Styrene-Butadiene Latex - Determination of Total Bound Styrene Content Second Edition
Rubber compounding ingredients ù Carbon black ù Determination of oil absorption number (OAN) and oil absorption number of
compressed sample (COAN) First Edition [Replaced: ISO 4656-1, ISO 4656-2, ISO 6894]
Acrylonitrile-Butadiene Rubber (NBR) - Evaluation Procedure Third Edition; Amendment 1:10/15/2004
Syrene-Butadiene Rubber (Carbon Black or Carbon Black and Oil Masterbatches) - Evaluation Procedure Fifth Edition
Rubber, Raw Natural - Colour Index Test Third Edition
Rubber, Vulcanized - Preparation of Samples and Test Pieces - Part 2: Chemical Tests First Edition
Rubber - Determination of Rebound Resilience of Vulcanizates Second Edition
Rubber, vulcanized or thermoplastic Determination of dynamic properties Part 1: General guidance First edition
Rubber, vulcanized or thermoplastic Determination of dynamic properties Part 1: General guidance First Edition;:1986 [Replaced:
ISO 4663]
Rubber, Vulcanized and Thermoplastic - Resistance to Weathering Second Edition
Rubber, Vulcanized - Determination of Temperature Rise and Resistance to Fatigue in Flexometer Testing - Part 1: Basic Principles
First Edition
Rubber, Vulcanized - Determination of Temperature Rise and Resistance to Fatique in Flexometer Testing - Part 2: Rotary
Flexometer First Edition
Rubber, Vulcanized - Determination of Temperature Rise and Resistance to Fatigue in Flexometer Testing - Part 3: Compression
Flexometer First Edition
Rubber and Plastics Hose and Hose Assemblies - Methods of Measurement of Dimensions Second Edition
Rubber and Plastics Hoses - Sub-Ambient Temperature Flexibility Tests Third Edition
Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods First Edition
Rubber- or Plastics-Coated Fabrics - Determination of Tear Resistance - Part 2: Ballistic Pendulum Method First Edition
Rubber- or Plastics-Coated Fabrics - Low-Temperature Bend Test Second Edition
ISO
4677-1
Atmospheres for Conditioning and Testing - Determination of Relative Humidity - Part 1: Aspirated Psychrometer Method First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4677-2
4683-1
4683-2
4684
4687-1
4688-1
4689
4689-2
4689-3
4691
Atmospheres for Conditioning and Testing - Determination of Relative Humidity - Part 2: Whirling Psychrometer Method First Edition
Raw Sheep Skins - Part 1: Descriptions of Defects First Edition
Raw Sheep Skins - Part 2: Designation and Presentation First Edition
Leather - Chemical Tests - Determination of Volatile Matter First Edition
Iron Ores - Determination of Phosphorus Content - Part 1: Molybdenum Blue Spectrophotometric Method First Edition
Iron Ores - Determination of Aluminium Content - Part 1: Flame Atomic Absorption Spectrometric Method Second Edition
Iron Ores - Determination of Sulfur Content - Barium Sulfate Gravimetric Method First Edition
Iron ores Determination of sulfur content Part 2: Combustion/titration method First Edition [Cancelled: ISO 4690]
Iron ores Determination of sulfur content Part 3: Combustion/infrared method First Edition [Cancelled: ISO 4690]
Iron Ores - Determination of Titanium Content - Diantipyrylmethane Spectrophotometric Method First Edition
ISO
ISO
4694
4695
ISO
ISO
ISO
ISO
ISO
4696-1
4696-2
4698
4700
4701
ISO
ISO
ISO
ISO
ISO
4703
4704
4706
4707
4708
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4709
4710
4711
4714
4715
4716
4718
4719
4720
4724
4725
4727
4728
4729
4730
4731
4733
4735
4736
ISO
4739
Iron Ores - Determination of Fluorine Content - Ion-Selective Electrode Method First Edition
Iron Ores - Determination of Reducibility Second Edition
Iron Ores - Static Test for Low-Temperature Reduction-Disintegration - Part 1: Reaction with CO, CO2 and H2 First Edition; Cancels
and Replaces 4696
Iron Ores - Static Test for Low-Temperature Reduction-Disintegration - Part 2: Reaction with CO First Edition
Iron Ore Pellets - Determination of Relative Free-Swelling Index First Edition
Iron ore pellets for blast furnace and direct reduction feedstocks ù Determination of the crushing strength Third edition
Iron Ores - Determination of Size Distribution by Sieving Second Edition
Test Conditions for Surface Grinding Machines with Two Columns - Machines for Grinding Slideways - Testing of Accuracy Third
Edition
Glass Plant, Pipeline and Fittings - Glass Plant Components First Edition; (Erratum-1979)
Refillable Welded Steel Gas Cylinders First Edition; (PNS 03: 1992)
Cork - Stoppers - Sampling for Inspection of Dimensional Characteristics First Edition
Composition Cork - Gasket Material - Test Methods Second Edition
Composition Cork - Gasket Material - Classification System, Requirements, Sampling, Packaging and Marking Second Edition
Cork - Cylindrical Stoppers for Sparkling Wines and Gasified Wines - Characteristics Second Edition
Agglomerated Cork Discs - Specifications First Edition
Composition Cork - Specifications, Sampling, Packaging and Marking Second Edition
Essential Oils - Quantitative Evaluation of Residue on Evaporation First Edition
Oil of Vetiver (Vetiveria Zizanioides (L.) Nash) Second Edition
Oil of Lemongrass [Cymbopogon Flexuosus (Nees ex Steudel) J.F. Watson] Second Edition
Oil of Spike Lavender (Lavandula Latifolia (L.f.) Medikus), Spanish Type Second Edition
Essential Oils - Nomenclature First Edition Second Edition
Oil of cedarwood, Virginian (Juniperus virginiana L.) Second Edition
Oil of Cedarwood, Texas (Juniperus Mexicana Schiede) Second Edition
Oil of Palmarosa (Cymbopogon Martinii (Roxburgh) W. Watson Var. Motia) First Edition
Oil of Spanish Wild Margoram (Thumus Mastichina L.) Second Edition
Oil of Pimento Leaf (Pimenta Dioica (Linnaeus) Merrill) First Edition
Oil of Melaleuca, Terpinen-4-ol Type (Tea Tree Oil) Second Edition
Oil of geranium (Pelargonium X ssp.) Second Edition
Oil of cardamom [Elettaria cardamomum (L.) Maton] Second Edition
Oils of Citrus - Determination of CD Value by Ultraviolet Spectrophotometric Analysis Second Edition
Fire Tests - Small Chimneys - Testing at Elevated Temperatures First Edition
Wrought Copper and Copper Alloy Products - Selection and Preparation of Specimens and Test Pieces for Mechanical Testing First
Edition
ISO
ISO
ISO
ISO
4740
4741
4742
4743
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4744
4746
4748
4749
4751
4753
4755
4757
4759-1
4759-3
4762
4766
ISO
ISO
ISO
ISO
4775
4778
4779
4782
ISO
4783-1
ISO
4783-2
ISO
ISO
ISO
ISO
ISO
ISO
4783-3
4785
4786
4787
4788
4790
ISO
ISO
4791-1
4793
Copper and Copper Alloys - Determination of Zinc Content - Flame Atomic Absorption Spectrometric Method First Edition
Copper and Copper Alloys - Determination of Phosphorus Content - Molybdovanadate Spectrometric Method First Edition
Copper Alloys - Determination of Nickel Content - Gravimetric Method First Edition
Copper Alloys - Determination of Nickel Content - Titrimetric Method First Edition
Copper and Copper Alloys - Determination of Chromium Content - Flame Atomic Absorption Spectrometric Method First Edition
Oxygen-Free Copper - Scale Adhesion Test First Edition
Copper Alloys - Determination of Iron Content - Na2EDTA Titrimetric Method First Edition
Copper Alloys - Determination of Lead Content - Flame Atomic Absorption Spectrometric Method First Edition
Copper and Copper Alloys - Determination of Tin Content - Spectrometric Method First Edition
Fasteners - Ends of Parts with External ISO Metric Thread Second Edition
Fasteners - Thread Undercuts for External Metric ISO Threads First Edition
Cross Recesses for Screws First Edition
Tolerances for Fasteners - Part 1: Bolts, Screws Studs and Nuts - Product Grades A, B and C Second Edition
Tolerances for Fasteners - Part 3: Plain Washers for Bolts, Screws and Nuts - Product Grades A and C Third Edition
Hexagon socket head cap screws Fourth Edition
Slotted Set Screws with Flat Point First Edition; (NZS/ISO 4766: 1983)
Hexagon Nuts for High-Strength Structural Bolting with Large Width Across Flats - Product Grade B - Property Classes 8 and 10 First
Edition
Chain Slings of Welded Construction - Grades M (4), S (6) and T (8) First Edition
Forged Steel Lifting Hooks with Point and Eye for Use with Steel Chains of Grade M(4) First Edition
Metal Wire for Industrial Wire Screens and Woven Wire Cloth Second Edition
Industrial Wire Screens and Woven Wire Cloth - Guide to the Choice of Aperture Size and Wire Diameter Combinations - Part 1:
Generalities Second Edition
Industrial Wire Screens and Woven Wire Cloth - Guide to the Choice of Aperture Size and Wire Diameter Combinations - Part 2:
Preferred Combinations for Woven Wire Cloth Second Edition
Industrial Wire Screens and Woven Wire Cloth - Guide to the Choice of Aperture Size and Wire Diameter Combinations - Part 3:
Preferred Combinations for Pre-Crimped or Pressure-Welded Wire Screens First Edition
Laboratory Glassware - Straight-Bore Glass Stopcocks for General Purposes First Edition
Enclosed-Scale Adjustable-Range Thermometers First Edition
Laboratory Glassware - Volumetric Glassware - Methods for Use and Testing of Capacity First Edition
Laboratory glassware - Graduated measuring cylinders Second edition
Glass-to-Glass Sealings - Determination of Stresses First Edition
Laboratory Apparatus - Vocabulary Relating to Apparatus Made Essentially from Glass, Porcelain or Vitreous Silica - Part 1: Names
for Items of Apparatus First Edition
Laboratory Sintered (Fritted) Filters - Porosity Grading, Classification and Designation First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4794
4795
4796-1
4796-2
4796-3
4797
4798
4799
4800
4801
ISO
4802-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4802-2
4803
4805
4814
4815
4817
4818
4819
4823 AMD 1
4823 CORR 1
4823
ISO
4829-1
ISO
4829-2
ISO
4831
ISO
4832
ISO
4833
Laboratory Glassware - Methods for Assessing Chemical Resistance of Enamels Used for Colour Coding and Colour Marking First
Edition
Glass for Thermometer Bulbs First Edition
Laboratory Glassware - Bottles - Part 1: Screw-Neck Bottles First Edition
Laboratory Glassware - Bottles - Part 2: Conical Neck Bottles First Edition
Laboratory Glassware - Bottles - Part 3: Aspirator Bottles First Edition
Laboratory glassware Boiling flasks with conical ground joints Second Edition
Laboratory Glassware - Filter Funnels First Edition
Laboratory Glassware - Condensers First Edition
Laboratory Glassware - Separating Funnels and Dropping Funnels Second Edition
Glass Alcoholometers and Alcohol Hydrometers Not Incorporating a Thermometer First Edition; (Erratum-1980)
Glassware - Hydrolytic Resistance of the Interior Surfaces of Glass Containers - Part 1: Determination by Titration Method and
Classification First Edition
Glassware - Hydrolytic Resistance of the Interior Surfaces of Glass Containers - Part 2: Determination by Flame Spectrometry and
Classification First Edition
Laboratory Glassware - Borosilicate Glass Tubing First Edition
Laboratory Glassware - Thermo-Alcoholometers and Alcohol- Thermohydrometers First Edition
Household Sewing Machines - Determination of Stability of Needle Thread Tension First Edition
Household Sewing Machines - Determination of Sewing Capacity First Edition
Household Sewing Machines - Determination of Directional Stability (Drift) First Edition
Household Sewing Machines - Determination of Creep of One Ply of Material over Another First Edition
Household Sewing Machines - Determination of Reproducibility of Stitch Length Setting First Edition
Dentistry ù Elastomeric impression materials AMENDMENT 1 Third Edition
Dentistry ù Elastomeric impression materials TECHNICAL CORRIGENDUM 1 Third Edition
Dentistry - Elastometric Impression Materials Third Edition
Steel and Cast Iron - Determination of Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method - Part 1: Silicon
Contents Between 0,05 and 1,0 % First Edition; (CEN EN 24 829 Part 1: 1990)
Steel and Iron - Determination of Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method - Part 2: Silicon
Contents Between 0,01 and 0,05% First Edition; (CEN EN 24 829 Part 2: 1990)
Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of coliforms Most probable
number technique Third Edition;: 1986 [Replaced: ISO 5541-2]
Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of coliforms Colony-count technique Third
Edition; Supersedes ISO 5541-1: 1986
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Microorganisms - Colony-Count
Technique at 30 Degrees Celcius Third Edition
ISO
ISO
4834
4849
Cinematography - Magnetic Sound Test Films Excluding Striped Release Prints - Basic Technical Characteristics Second Edition
Personal Eye-Protectors - Specifications First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4850
4851
4852
4854
4855
4856
4858
4859
4860
4863
ISO
ISO
ISO
4866
4867
4868
ISO
4869-1
ISO
4869-2
ISO
ISO
4869-3
4871
ISO
ISO
ISO
4872
4873
4874
Personal Eye-Protectors for Welding and Related Techniques - Filters - Utilisation and Transmittance Requirements First Edition
Personal Eye-Protectors - Ultra-Violet Filters - Utilisation and Transmittance Requirements First Edition
Personal Eye-Protectors - Infra-Red Filters - Utilisation and Transmittance Requirements First Edition
Personal Eye-Protectors - Optical Test Methods First Edition
Personal Eye-Protectors - Non-Optical Test Methods First Edition
Personal Eye-Protectors - Synoptic Tables of Requirements for Oculars and Eye-Protectors First Edition
Wood - Determination of Volumetric Shrinkage First Edition
Wood - Determination of Radial and Tangential Swelling First Edition
Wood - Determination of Volumetric Swelling First Edition
Resilient Shaft Couplings - Information to Be Supplied by Users and Manufacturers First Edition
Mechanical Vibration and Shock - Vibration of Buildings - Guidelines for the Measurement of Vibrations and Evaluation of Their
Effects on Buildings First Edition; Amendment 1-1994; PNS 1092:1992; Amendment 2-1996
Code for the Measurement and Reporting of Shipboard Vibration Data First Edition
Code for the Measurement and Reporting of Local Vibration Data of Ship Structures and Equipment First Edition
Acoustics - Hearing Protectors - Part 1: Subjective Method for the Measurement of Sound Attenuation First Edition; (CEN EN 248691: 1992)
Acoustics Hearing protectors Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn
First Edition; Technical Corrigendum 1: 09/15/2006
Acoustics ù Hearing protectors ù Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture First
Edition [Cancelled: ISO TR 4869-3]
Acoustics - Declaration and Verification of Noise Emission Values of Machinery and Equipment Second Edition
Acoustics - Measurement of Airborne Noise Emitted by Construction Equipment Intended for Outdoor Use - Method for Determining
Compliance with Noise Limits First Edition; (Erratum-1979) (SAE J 2101)
Information Technology - ISO 8-Bit Code for Information Interchange - Structure and Rules for Implementation Third Edition
Tobacco - Sampling of Batches of Raw Material - General Principles Second Edition
ISO
ISO
ISO
ISO
4875-1
4875-2
4875-3
4876
ISO
4880
Metal-cutting band saw blades Part 1: Vocabulary Lames de scies Ó ruban Ó mÚtaux Partie 1: Vocabulaire Second Edition
Metal-cutting band saw blades Part 2: Characteristics and dimensions Second Edition
Metal Cutting Band Saw Blades - Part 3: Characteristics Relating to Each Type of Blade First Edition
Tobacco and Tobacco Products - Determination of Maleic Hydrazide Residues First Edition
Burning Behaviour of Textiles and Textile Products - Vocabulary Comportement Au Feu Des Textiles Et Des Produits Textiles Vocabulaire Second Edition
ISO
4882
ISO
ISO
ISO
ISO
ISO
ISO
4883
4884
4885
4892-1
4892-2
4892-3
ISO
ISO
4892-4 CORR 1
4892-4
ISO
4894-1
ISO
ISO
4894-2
4895
ISO
ISO
ISO
ISO
4897
4898
4899
4900
ISO
4901
ISO
4902
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4903
4909
4911
4912
4913
4915
4916
4919
4920
4921
Office Machines and Data Processing Equipment - Line Spacings and Character Spacings First Edition
Hardmetals - Determination of Contents of Metallic Elements by X-Ray Fluorescence - Solution Method First Edition; (CEN EN
24883: 1993)
Hardmetals - Sampling and Testing of Powders Using Sintered Test Pieces First Edition; (CEN EN 24884: 1993)
Ferrous Products - Heat Treatments - Vocabulary First Edition
Plastics - Methods of Exposure to Laboratory Light Sources - Part 1: General Guidance Second Edition
Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps Second Edition
Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps Second Edition
Plastics ù Methods of exposure to laboratory light sources ù Part 4: Open-flame carbon-arc lamps TECHNICAL CORRIGENDUM 1
Second Edition
Plastics ù Methods of exposure to laboratory light sources ù Part 4: Open-flame carbon-arc lamps Second Edition
Plastics - Styrene/Acrylonitrile (SAN) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications
Third Edition
Plastics - Styrene/ Acrylonitrile (SAN) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of
Properties Second Edition
Plastics - Liquid Epoxide Resins - Determination of Tendency to Crystallize Second Edition
Cellular Plastics - Determination of the Coefficient of Linear Thermal Expansion of Rigid Materials at Sub-Ambient Temperatures First
Edition
Rigid cellular plastics Thermal insulation products for buildings Specifications Third Edition
Textile-Glass-Reinforced Thermosetting Plastics - Properties and Test Methods Second Edition
Textile Glass - Mats and Fabrics - Determination of Contact Mouldability First Edition
Reinforced Plastics Based on Unsaturated Polyester Resins - Determination of Residual Styrene Monomer Content First Edition;
(AS/NZS 4257.8: 1994)
Information Technology - Data Communication - 37-Pole DTE/DCE Interface Connector and Contact Number Assignments Second
Edition; AS/NZS 3612: 1994
Information Technology - Data Communication - 15-Pole DTE/DCE Interface Connector and Contact Number Assignments Second
Edition; NZS/ISO 4903: 1989; CAN/CSA-ISO 4903-95
Identification cards Financial transaction cards Magnetic stripe data content for track 3 First Edition
Textiles - Cotton Fibres - Equipment and Artificial Lighting for Cotton Classing Rooms First Edition
Textiles - Cotton Fibres - Evaluation of Maturity - Microscopic Method First Edition
Textiles - Cotton Fibres - Determination of Length (Span Length) and Uniformity Index First Edition
Textiles - Stitch Types - Classification and Terminology Second Edition; (PNS 1216: 1994)
Textiles - Seam Types - Classification and Terminology Second Edition
Carpets - Determination of Tuft Withdrawal Force First Edition
Textile Fabrics - Determination of Resistance to Surface Wetting (Spray Test) First Edition
Knitting - Basic Concepts - Vocabulary Tricotage - Notions De Base - Vocabulaire Second Edition
ISO
ISO
4925
4926
ISO
4927
ISO
4928
ISO
4929
ISO
ISO
4930
4934
ISO
ISO
ISO
4935
4937
4938
ISO
ISO
ISO
ISO
4939
4940
4941
4942
ISO
ISO
4943
4945
ISO
ISO
4946
4947
ISO
4948-1
ISO
ISO
4948-2
4950-1
ISO
4950-2
ISO
4950-3
Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems Second Edition
Road vehicles Hydraulic braking systems Non-petroleum-base reference fluids Second Edition
Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic
brake fluid (Service temperature 120 C max.) Second Edition
Road Vehicles - Elastomeric Cups and Seals for Cylinders for Hydraulic Braking Systems Using a Non-Petroleum Base Hydraulic
Brake Fluid (Service Temperature 120 Degrees Celsius Maximum) Third Edition
Road Vehicles - Diaphragm Gaskets for Hydraulic Brake Master Cylinder Reservoirs Using a Non-Petroleum Base Hydraulic Brake
Fluid First Edition
Road vehicles Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service
temperature 150 C max.) Second Edition
Steel and iron Determination of sulfur content Gravimetric method Second Edition
Steel and Iron - Determination of Sulfur Content - Infrared Absorption Method After Combustion in an Induction Furnace First Edition;
(Corrected and Reprinted - 1990) (AS/NZS 1050.16: 1994)
Steel and Iron - Determination of Chromium Content - Potentiometric or Visual Titration Method First Edition
Steel and Iron - Determination of Nickel Content - Gravimetric or Titrimetric Method First Edition
Steel and Cast Iron - Determination of Nickel Content - Dimethylglyoxime Spectrophotometric Method First Edition; (Corrected and
Reprinted - 1986)
Steel and Cast Iron - Determination of Nickel Content - Flame Atomic Absorption Spectrometric Method First Edition
Steels and Iron - Determination of Molybdenum Content - Thiocyanate Spectrophotometric Method Second Edition
Steel and Iron - Determination of Vanadium Content - N-BPHA Spectrophotometric Method First Edition
Steel and Cast Iron - Determination of Copper Content - Flame Atomic Absorption Spectrometric Method First Edition; (AS/NZS
1050.37: 1994)
Steel - Determination of Nitrogen Content - Spectrophotometric Method First Edition; (Erratum-1979)
Steel and Cast Iron - Determination of Copper Content - 2,2 - Diquinolyl Spectrophotometric Method First Edition; (Corrected and
Reprinted - 1986)
Steel and Cast Iron - Determination of Vanadium Content - Potentiometric Titration Method First Edition
Steels - Classification - Part 1: Classification of Steels into Unalloyed and Alloy Steels Based on Chemical Composition First Edition
Steels - Classification - Part 2: Classification of Unalloyed and Alloy Steels According to Main Quality Classes and Main Property or
Application Characteristics First Edition
High Yield Strength Flat Steel Products - Part 1: General Requirements Second Edition; AMENDMENT 1: 12/01/2003
High Yield Strength Flat Steel Products - Part 2: Products Supplied in the Normalized or Controlled Rolled Condition Second Edition;
AMENDMENT 1: 12/01/2003
High Yield Strength Flat Steel Products - Part 3: Products Supplied in the Heat-Treated (Quenched + Tempered) Condition Second
Edition; AMENDMENT 1: 12/01/2003
ISO
4951-1
ISO
4951-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
4951-3
4952
4954
4955
4957
4960
4965
4967
4968
4969
4970
4978
4986
4987
4990
4991
4992-1
4992-2
4993
4995
4996
4997
4998
ISO
4999
High Yield Strength Steel Bars and Sections - Part 1: General Delivery Requirements First Edition; Together with ISO 4951-2 and ISO
4951-3, Cancels and Replaces ISO 4951: 1979
High Yield Strength Steel Bars and Sections - Part 2: Delivery Conditions for Normalized, Normalized Rolled and As-Rolled Steels
First Edition
High Yield Strength Steel Bars and Sections - Part 3: Delivery Conditions for Thermomechanically-Rolled Steels First Edition;
Together with ISO 4951-1 and ISO 4951-2, Cancels and Replaces ISO 4951: 1979
Structural steels with improved atmospheric corrosion resistance Third Edition
Steels for Cold Heading and Cold Extruding Second Edition
Heat-resisting steels Third edition
Tool Steels Second Edition
Cold-Reduced Carbon Steel Strip with a Carbon Content over 0,25% Second Edition
Axial Load Fatigue Testing Machines - Dynamic Force Calibration - Strain Gauge Technique First Edition
Steel - Determination of Content of Non-Metallic Inclusions - Micrographic Method Using Standard Diagrams Second Edition
Steel - Macrographic Examination by Sulphur Print (Baumann Method) First Edition
Steel - Macroscopic Examination by Etching with Strong Mineral Acids First Edition
Steel - Determination of Total or Effective Thickness of Thin Surface-Hardened Layers First Edition
Flat Rolled Steel Products for Welded Gas Cylinders First Edition; (PNS 869: 1992)
Steel Castings - Magnetic Particle Inspection First Edition
Steel Castings - Penetrant Inspection First Edition
Steel Castings - General Technical Delivery Requirements Second Edition
Steel Castings for Pressure Purposes Second Edition
Steel castings Ultrasonic examination Part 1: Steel castings for general purposes First Edition
Steel castings Ultrasonic examination Part 2: Steel castings for highly stressed components First Edition
Steel Castings - Radiographic Inspection First Edition
Hot-Rolled Steel Sheet of Structural Quality Fourth Edition
Hot-Rolled Steel Sheet of High Yield Stress Structural Quality Fourth Edition
Cold-reduced carbon steel sheet of structural quality Fourth Edition
Continuous hot-dip zinc-coated carbon steel sheet of structural quality Fourth Edition
Continuous Hot-Dip Terne (Lead Alloy) Coated Cold-Reduced Carbon Steel Sheet of Commercial, Drawing and Structural Qualities
Fourth Edition
ISO
ISO
5000
5001
Continuous hot-dip aluminium-siliconcoated cold-reduced carbon steel sheet of commercial and drawing qualities Third Edition
Cold-Reduced Carbon Steel Sheet for Vitreous Enamelling Fourth Edition
ISO
5002
Hot-Rolled and Cold-Reduced Electrolytic Zinc-Coated Carbon Steel Sheet of Commercial and Drawing Qualities First Edition
ISO
ISO
5003
5005
ISO
ISO
5006
5007
ISO
ISO
ISO
5008 CORR 1
5008
5010
ISO
ISO
5011
5013
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5014
5016
5017
5018
5019-1
5019-2
5019-3
5019-4
5019-5
5019-6
5022
5024
5025
ISO
5031
ISO
5048
ISO
5049-1
ISO
ISO
5050
5051
Flat Bottom Railway Rails and Special Rail Sections for Switches and Crossings of Non-Treated Steel - Technical Delivery
Requirements First Edition
Earth-Moving Machinery - Method for Locating the Centre of Gravity First Edition; (SAE J 874-1993)
Earth-moving machinery Operator's field of view Test method and performance criteria First Edition; Replaces ISO 5006-1:1991,
ISO 5006-2:1993 and ISO 5006-3:1993 [Superseded: ISO 5006-1]
Agricultural Wheeled Tractors - Operator s Seat - Laboratory Measurement of Transmitted Vibration Second Edition
Agricultural wheeled tractors and field machinery ù Measurement of whole-body vibration of the operator TECHNICAL
CORRIGENDUM 1 Second Edition
Agricultural wheeled tractors and field machinery ù Measurement of whole-body vibration of the operator Second Edition
Earth-moving machinery ù Rubber-tyred machines ù Steering requirements Third Edition
Inlet Air Cleaning Equipment for Internal Combustion Engines and Compressors - Performance Testing Second Edition * Corrected
and Reprinted 07/15/2001
Refractory Products - Determination of Modulus of Rupture at Elevated Temperatures First Edition
Dense and Insulating Shaped Refactory Products - Determination of Modulus of Rupture at Ambient Temperature Second Edition
Shaped Insulating Refractory Products - Determination of Bulk Density and True Porosity Second Edition
Dense Shaped Refractory Products - Determination of Bulk Density, Apparent Porosity and True Porosity Second Edition
Refractory Materials - Determination of True Density First Edition
Refractory Bricks - Dimensions - Part 1: Rectangular Bricks First Edition
Refractory Bricks - Dimensions - Part 2: Arch Bricks First Edition
Refractory Bricks - Dimensions - Part 3: Rectangular Checker Bricks for Regenerative Furnaces First Edition
Refractory Bricks - Dimensions - Part 4: Dome Bricks for Electric Arc Furnace Roofs Second Edition
Refractory Bricks - Dimensions - Part 5: Skewbacks First Edition
Refractory Bricks - Dimensions - Part 6: Basic Bricks for Oxygen Steel-Making Converters Second edition
Shaped Refractory Products - Sampling and Acceptance Testing First Edition
Petroleum Liquids and Liquefied Petroleum Gases - Measurement - Standard Reference Conditions Second Edition
Reinforcement Products - Woven Fabrics - Determination of Width and Length Second Edition
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Couplings and Hose Components Used in Pneumatic
Handling - Safety Code First Edition
Continuous Mechanical Handling Equipment - Belt Conveyors with Carrying Idlers - Calculation of Operating Power and Tensile
Forces Second Edition
Mobile Equipment for Continuous Handling of Bulk Materials - Part 1: Rules for the Design of Steel Structures Second Edition
Continuous Mechanical Handling Equipment - Vertical Bucket Elevators with Calibrated Round Steel Link Chains - General
Characteristics First Edition
Continuous Mechanical Handling Equipment - Deep Elevator Bucket with Flat Rear Wall - Main Dimensions First Edition
ISO
ISO
ISO
ISO
ISO
5053
5057
5061
5065-1
5065-2
ISO
ISO
5066-1
5066-2
ISO
5068-1
ISO
5068-2
ISO
5069-1
ISO
5069-2
ISO
ISO
ISO
ISO
ISO
5071-1
5072
5073
5074
5077
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5079
5080
5084
5085-1
5086
5089
5122
5123
5127
5128
5129
5130
Powered Industrial Trucks - Terminology First Edition
Industrial Trucks - Inspection and Repair of Fork Arms in Service on Fork-Lift Trucks First Edition;
Animal Feeding Stuffs - Determination of Castor Oil Seed Husks - Microscope Method Second Edition
Aircraft - Magnetic Indicators - Part 1: Characteristics First Edition
Aircraft - Magnetic Indicators - Part 2: Tests First Edition
Aircraft - Hermetically Sealed Monostable Electrical Relays, 2A and 3A - Part 1: Operating Characteristics and Test Conditions First
Edition
Aircraft - Hermetically Sealed Monostable Electrical Relays, 2A and 3A - Part 2: Type Approval Tests First Edition
Brown coals and lignites ù Determination of moisture content ù Part 1: Indirect gravimetric method for total moisture First Edition
[Superseded: ISO 5068]
Brown coals and lignites ù Determination of moisture content ù Part 2: Indirect gravimetric method for moisture in the analysis sample
First Edition [Superseded: ISO 5068]
Brown Coals and Lignites - Principles of Sampling - Part 1: Sampling for Determination of Moisture Content and for General Analysis
First Edition
Brown Coals and Lignites - Principles of Sampling - Part 2: Sample Preparation for Determination of Moisture Content and for
General Analysis First Edition
Brown Coals and lignites - Determination of the Volatile Matter in the Analysis Sample - Part 1: Two-Furnace Method First Edition
Brown Coals and Lignites - Determination of True Relative Density and Apparent Relative Density First Edition
Brown Coals and Lignites - Determination of Humic Acids Second Edition
Hard Coal - Determination of Hardgrove Grindability Index Second Edition
Textiles ù Determination of dimensional change in washing and drying Second Edition
Textiles Fibres - Determination of Breaking Force and Elongation at Break of Individual Fibres Second Edition; (CEN EN ISO 5079:
1995)
Sisal Agricultural Twines Second Edition; (CEN EN 25080: 1993)
Textiles - Determination of Thickness of Textiles and Textile Products Second Edition CEN EN ISO 5084: 1996
Textiles - Determination of Thermal Resistance - Part 1: Low Thermal Resistance First Edition
Hand-Knotted Carpets - Sampling and Selection of Areas of Test First Edition
Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical Testing First Edition
Documentation - Abstract Sheets in Serial Publications First Edition
Documentation - Headers for Microfiche of Monographs and Serials First Edition
Information and Documentation - Vocabulary First Edition
Acoustics - Measurement of Noise Inside Motor Vehicles First Edition
Acoustics - Measurement of Noise Inside Aircraft Third Edition
Acoustics ù Measurements of sound pressure level emitted by stationary road vehicles Second Edition
ISO
5131
ISO
5135
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5136
5138-1
5138-2
5138-3
5138-4
5138-5
5138-7
5138-9
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5145 AMD 1
5145
5149
5151
5163
5164
5165
ISO
5167-1
ISO
5167-2
ISO
5167-3
ISO
5167-4
ISO
ISO
ISO
ISO
5168
5169
5170
5171
ISO
5172
Acoustics - Tractors and Machinery for Agriculture and Forestry - Measurement of Noise at the Operator s Position - Survey Method
Second Edition
Acoustics - Determination of Sound Power Levels of Noise from Air-Terminal Devices, Air-Terminal Units, Dampers and Valves by
Measurement in a Reverberation Room Second Edition
Acoustics - Determination of Sound Power Radiated into a Duct by Fans and Other Air-Moving Devices - In-Duct Method Second
Edition
Office Machines - Vocabulary - Section 01 : Dictation Equipment First Edition
Office Machines - Vocabulary - Section 02 : Duplicators First Edition
Office Machines - Vocabulary - Section 03 : Addressing Machines First Edition
Office Machines - Vocabulary - Section 04 : Letter Opening Machines First Edition
Office Machines - Vocabulary - Section 05 : Letter Folding Machines First Edition
Office Machines - Vocabulary - Part 07: Postal Franking Machines First Edition
Office Machines - Vocabulary - Part 09: Typewriters First Edition
Cylinder valve outlets for gases and gas mixtures ù Selection and dimensioning AMENDMENT 1: Cylinder valve outlets for gases for
medical use Second Edition
Cylinder valve outlets for gases and gas mixtures ù Selection and dimensioning Second Edition
Mechanical Refrigerating Systems Used for Cooling and Heating - Safety Requirements First Edition;
Non-Ducted Air Conditioners and Heat Pumps - Testing and Rating for Performance First Edition;
Petroleum products Determination of knock characteristics of motor and aviation fuels Motor method Third Edition
Petroleum products Determination of knock characteristics of motor fuels Research method Third Edition
Petroleum Products - Determination of the Ignition Quality of Diesel Fuels - Cetane Engine Method Third Edition
Measurement of Fluid Flow by Means of Pressure Differential Devices Inserted in Circular Cross-Section Conduits Running Full - Part
1: General Principles and Requirements Second Edition
Measurement of Fluid Flow by Means of Pressure Differential Devices Inserted in Circular-Cross Section Conduits Running Full - Part
2: Orifice Plates First Edition
Measurement of Fluid Flow by Means of Pressure Differential Devices Inserted in Circular-Cross Section Conduits Running Full - Part
3: Nozzles and Venturi Nozzles First Edition
Measurement of Fluid Flow by Means of Pressure Differential Devices Inserted in Circular Cross-Section Conduits Running Full - Part
4: Venturi Tubes First Edition
Measurement of fluid flow - Procedures for the evaluation of uncertainties Second edition; Cancels and replaces ISO/TR 5168:1998
Machine Tools - Presentation of Lubrication Instructions First Edition
Machine Tools - Lubrication Systems First Edition
Pressure Gauges Used in Welding, Cutting and Allied Processes Second Edition
Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests Third Edition;:1995 [Replaced: ISO
5186]
ISO
5173
ISO
5175
ISO
ISO
ISO
ISO
5178
5179
5182
5183-1
ISO
ISO
5183-2
5184
ISO
5187
ISO
5193
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5194
5196-1
5196-2
5198
5199
5208
5209
5210
ISO
5211
ISO
ISO
5218
5219
ISO
ISO
ISO
ISO
ISO
5220
5221
5223
5232
5233
Destructive Tests on Welds in Metallic Materials - Bend Tests Second Edition
Equipment Used in Gas Welding, Cutting and Allied Processes - Safety Devices for Fuel Gases and Oxygen or Compressed Air General Specifications, Requirements and Tests First Edition
Destructive Tests on Welds in Metallic Materials - Longitudinal Tensile Test on Weld Metal in Fusion Welded Joints First Edition
Investigation of Brazeability Using a Varying Gap Test Piece First Edition
Welding - Materials for Resistance Welding Electrodes and Ancillary Equipment Second Edition
Resistance Welding Equipment - Electrode Adaptors, Male Taper 1:10 - Part 1: Conical Fixing, Taper 1:10 Second Edition
Resistance Spot Welding - Electrode Adaptors, Male Taper 1:10 - Part 2: Parallel Shank Fixing for End-Thrust Electrodes Second
Edition
Straight Resistance Spot Welding Electrodes First Edition; (CEN EN 25184: 1994)
Welding and Allied Processes - Assemblies Made with Soft Solders and Brazing Filler Metals - Mechanical Test Methods First Edition
Wrought Aluminium and Aluminium Alloys - Drawn Round Bars - Tolerances on Shape and Dimensions (Symmetric Plus and Minus
Tolerances on Diameter) First Edition
Aluminium and Aluminium Alloys - Determination of Zinc Content - Flame Atomic Absorption Spectrometric Method First Edition
Magnesium Alloys - Determination of Thorium - Part 1: Gravimetric Method First Edition
Magnesium Alloys - Determination of Thorium - Part 2: Titrimetric Method First Edition
Centrifugal, Mixed Flow and Axial Pumps - Code for Hydraulic Performance Tests - Precision Class First Edition
Technical Specifications for Centrifugal Pumps - Class II Second Editiom
Industrial Valves - Pressure Testing of Valves Second Edition
General Purpose Industrial Valves - Marking First Edition
Industrial Valves - Multi-Turn Valve Actuator Attachments First Edition
Industrial Valves - Part-Turn Actuator Attachment First Edition; Cancels and Replaces ISO 5211-1:1977, ISO 5211-2:1979 and ISO
5211-3:1982
Information technology Codes for the representation of human sexes Technologies de l information Codes de reprÚsentation des
sexes humains First Edition
Air Distribution and Air Diffusion - Laboratory Aerodynamic Testing and Rating of Air Terminal Devices First Edition
Air Distribution and Air Diffusion - Aerodynamic Testing and Rating of Constant and Variable Dual or Single Duct Boxes and Single
Duct Units First Edition; Addendum 1: 1984
Air Distribution and Air Diffusion - Rules to Methods of Measuring Air Flow Rate in an Air Handling Duct First Edition
Test Sieves for Cereals Third Edition; Amendment 1: 12/15/1999
Graphical Symbols for Textile Machinery Symboles Graphiques Pour Machines Textiles Second Edition
Textile Machinery and Accessories - Bottom Fluted Rollers for Drafting Systems First Edition
Textile machinery and accessories - Metallic card clothing - Definitions of dimensions, types and mounting MatÚriel pour l'industrie
textile Garnitures de carde DÚfinitions des dimensions, types et montage Second Edition
Textile Machinery and Accessories - Packages of Yarns and Intermediate Products - Part 1: Terminology First Edition
Textile Machinery and Accessories - Packages of Yarns and Intermediate Products - Part 2: Forms of Winding First Edition
Textile Machinery and Accessories - Winding - Basic Terms First Edition
Textile Machinery and Accessories - Warp Creels - Main Dimensions Second Edition
Textile machinery and accessories Numbering of heald frames and drop wire bars in a loom Second Edition
Textile machinery and accessories ù Weaving machines ù Part 1: Vocabulary and classification TECHNICAL CORRIGENDUM 1
MatÚriel pour l'industrie textile ù MÚtiers et machines Ó tisser ù Partie 1: Vocabulaire et classification RECTIFICATIF TECHNIQUE 1
First Edition
Textile machinery and accessories ù Weaving machines ù Part 1: Vocabulary and classification MatÚriel pour l'industrie textile ù
MÚtiers et machines Ó tisser ù Partie 1: Vocabulaire et classification First Edition [Replaced: ISO 5247]
Textile Machinery and Accessories - Weaving Machines - Part 2: Accessories - Vocabulary First Edition
Textile Machinery and Accessories - Weaving Machines - Part 3: Parts of the Machine - Vocabulary First Edition
ISO
ISO
ISO
ISO
ISO
ISO
5234
5238-1
5238-2
5239
5240
5243
ISO
5247-1 CORR 1
ISO
ISO
ISO
5247-1
5247-2
5247-3
ISO
ISO
5248
5249
ISO
ISO
ISO
5250
5251
5252
ISO
ISO
5256
5261
ISO
5263-1
ISO
5263-2
ISO
ISO
ISO
5263-3
5264-1
5264-2
Textile Machinery and Accessories - Dyeing and Finishing Machinery - Vocabulary for Ancillary Devices Materiel pour L'Industrie
Textile et Accessoires - Machines de Teinture et d'Appret - Vocabulaire Relatif aux Dispositifs Annexes Second Edition
Textile Machinery and Accessories - Guide Rollers for Dyeing and Finishing Machinery - Main Dimensions First Edition
Textile Machinery and Accessories - Dyeing and Finishing Machinery - Terms for Tentering and Heat-Treatment Machinery Second
Edition
Stainless Steel Butt-Welding Fittings First Edition
Steel Tubes - Tolerance Systems Second Edition
Steel Pipes and Fittings for Buried or Submerged Pipelines - External and Internal Coating by Bitumen or Coal Tar Derived Materials
First Edition
Technical Drawings - Simplified Representation of Bars and Profile Sections Second Edition
Pulps Laboratory wet disintegration Part 1: Disintegration of chemical pulps First Edition; Together With ISO 5263-2:2004 and ISO
5263-3:2004 Replaces ISO 5263:1995
Pulps Laboratory wet disintegration Part 2: Disintegration of mechanical pulps at 20 C First Edition; Together With ISO 52631:2004 and ISO 5263-3:2004 Replaces ISO 5263:1995
Pulps Laboratory wet disintegration Part 3: Disintegration of mechanical pulps at greater than or equal to 85 C First Edition;
Together with ISO 5263-1:2004 and ISO 5263-2:2004 Replaces ISO 5263:1995
Pulps - Laboratory Beating - Part 1: Valley Beater Method First Edition
Pulps Laboratory beating Part 2: PFI mill method Second Edition
ISO
ISO
5267-1
5267-2
Pulps - Determination of Drainability - Part 1: Schopper-Riegler Method Second Edition; Technical Corrigendum 1-03/01/2001
Pulps - Determination of Drainability - Part 2:Canadian Standard" Freeness Method Second Edition"
ISO
ISO
ISO
ISO
ISO
ISO
5269-1
5269-2
5270
5272
5275
5280
Pulps Preparation of laboratory sheets for physical testing Part 1: Conventional sheet-former method Third Edition
Pulps Preparation of laboratory sheets for physical testing Part 2: Rapid-K÷then method Third Edition
Pulps - Laboratory Sheets - Determination of Physical Properties Second Edition
Toluene for Industrial Use - Specifications First Edition
Petroleum products and hydrocarbon solvents Detection of thiols and other sulfur species Doctor test Second Edition
Xylene for Industrial Use - Specification First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5282
5284
5285
5287
5288
5289
5290
Aromatic Hydrocarbons - Determination of Sulphur Content - Pitt-Ruprecht Reduction and Spectrophotometric Method First Edition
Conveyor belts - List of equivalent terms Second Edition Second edition; Corrigendum 1:2005
Conveyor belts Guidelines for storage and handling Second Edition
Belt drives Narrow V-belts for the automotive industry Fatigue test Third Edition
Synchronous Belt Drives - Vocabulary Transmissions Synchrones Par Courroies - Vocabulaire Second edition
Agricultural Machinery - Endless Hexagonal Belts and Groove Sections of Corresponding Pulleys Second Edition
Belt Drives - Grooved Pulleys for Narrow V-Belts - Groove Sections 9N/J, 15N/J, and 25N/J (Effective System) Fourth Edition
ISO
ISO
5291
5292
Belt Drives - Grooved Pulleys for Joined Classical V-Belts - Groove Sections AJ, BJ, CJ and DJ (Effective System) Second Edition
Belt Drives - V-Belts and V-Ribbed Belts - Calculation of Power Ratings Second Edition
ISO
ISO
ISO
5293
5294
5295
Conveyor belts Determination of minimum transition distance on three idler rollers Second Edition; Replaces ISO 10357: 11/1/89
Synchronous Belt Drives - Pulleys Second Edition
Synchronous Belts - Calculation of Power Rating and Drive Centre Distance Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5296-1
5296-2
5302
5306
5310
5311
5313
5314
5315
5316
5317
5320
5321
5323
Synchronous Belt Drives - Belts - Part 1: Pitch Codes MXL, XL, L, H, XH and XXH - Metric and Inch Dimensions First Edition
Synchronous Belt Drives - Belts - Part 2: Pitch Codes MXL and XXL - Metric Dimensions First Edition
Vacuum technology Turbomolecular pumps Measurement of performance characteristics First Edition
Fertilizers - Presentation of Sampling Reports First Edition
Fertilizers - Determination of Potassium Content - Titrimetric Method First Edition
Fertilizers - Determination of Bulk Density (Tapped) Third Edition; (CEN EN 1237: 1995)
High Nitrogen Content, Straight Ammonium Nitrate Fertilizers - Determination of Oil Retention First Edition
Fertilizers - Determination of Ammoniacal Nitrogen Content - Titrimetric Method After Distillation First Edition
Fertilizers - Determination of Total Nitrogen Content - Titrimetric Method After Distillation First Edition
Fertilizers - Extraction of Water-Soluble Phosphates First Edition
Fertilizers - Determination of Water-Soluble Potassium Content - Preparation of the Test Solution First Edition
Solid Wood Parquet - Classification of Fir and Spruce Strips First Edition
Coniferous Wood Raw Parquet Blocks - General Characteristics First Edition
Solid Wood Parquet and Raw Parquet Blocks - Vocabulary First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5326
5327
5328
5329
5333
5334
5344
5347-5
5347-7
5347-8
Solid Wood Paving Blocks - Hardwood Paving Blocks - Quality Requirements First Edition
Solid Wood Paving Blocks - General Characteristics First Edition
Solid Wood Paving Blocks - Softwood Paving Blocks - Quality Requirements First Edition
Solid Wood Paving Blocks - Vocabulary First Edition
Coniferous Wood Raw Parquet Blocks - Classification of Fir and Spruce Parquet Blocks First Edition
Solid Wood Parquet - Classification of Maritime Pine Strips First Edition
Electrodynamic vibration generating systems Performance characteristics Second Edition
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 5: Calibration by Earth s Gravitation First Edition
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 7: Primary Calibration by Centrifuge First Edition
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 8: Primary Calibration by Dual Centrifuge First Edition
ISO
5347-10
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 10: Primary Calibration by High Impact Shocks First Edition
ISO
ISO
ISO
5347-11
5347-12
5347-13
ISO
ISO
ISO
ISO
5347-14
5347-15
5347-16
5347-17
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 11: Testing of Transverse Vibration Sensitivity First Edition
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 12: Testing of Transverse Shock Sensitivity First Edition
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 13: Testing of Base Strain Sensitivity First Edition
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 14: Resonance Frequency Testing of Undamped Accelerometers
on a Steel Block First Edition
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 15: Testing of Acoustic Sensitivity First Edition
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 16: Testing of Mounting Torque Sensitivity First Edition
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 17: Testing of Fixed Temperature Sensitivity First Edition
ISO
ISO
5347-18
5347-19
ISO
ISO
5347-22
5348
ISO
5349-1
ISO
5349-2
ISO
5350-1
ISO
ISO
5350-2
5350-3
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 18: Testing of Transient Temperature Sensitivity First Edition
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 19: Testing of Magnetic Field Sensitivity First Edition
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 22: Accelerometer Resonance Testing - General Methods First
Edition
Mechanical Vibration and Shock - Mechanical Mounting of Accelerometers Second Edition
Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 1: General
Requirements First Edition
Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 2: Practical Guidance
for Measurement at the Workplace First Edition
Pulps Estimation of dirt and shives Part 1: Inspection of laboratory sheets by transmitted light PÔtes Estimation des impuretÚs et
b¹chettes Partie 1: Examen des feuilles de laboratoire par lumi×re transmise Third Edition
Pulps Estimation of dirt and shives Part 2: Inspection of mill sheeted pulp by transmitted light PÔtes Estimation des impuretÚs et
b¹chettes Partie 2: Examen des pÔtes en feuilles par lumi×re transmise Third Edition
Pulps - Estimation of Dirt and Shives - Part 3: Inspection by Reflected Light First Edition
ISO
ISO
ISO
ISO
ISO
ISO
5350-4
5351
5353
5355 CORR 1
5355
5356-1
ISO
ISO
ISO
ISO
5356-2
5358
5359
5360
ISO
ISO
ISO
ISO
5361
5361-4
5362
5364
ISO
5366-1
ISO
ISO
5366-3
5367
ISO
5373
ISO
5377
ISO
5378
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5379
5381
5388
5389
5390
5391
5393
Pulps Estimation of dirt and shives Part 4: Instrumental inspection by reflected light using Equivalent Black Area (EBA) method First
Edition;: 1999 [Replaced: ISO 15319]
Pulps Determination of limiting viscosity number in cupriethylenediamine (CED) solution First Edition; Replaces ISO 5351-1
Earth-Moving Machinery, and Tractors and Machinery for Agriculture and Forestry - Seat Index Point Second Edition
Alpine ski-boots - Requirements and test methods CORR 1 Fourth Edition
Alpine ski-boots - Requirements and test methods Fourth Edition
Anaesthetic and Respiratory Equipment - Conical Connectors - Part 1: Cones and Sockets Third Edition
Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectors Second Edition
Anaesthetic Machines for Use with Humans Second Edition
Low-Pressure Hose Assemblies for Use with Medical Gases Second Edition
Anaesthetic vaporizers Agent-specific filling systems Second Edition
Anaesthetic and Respiratory Equipment - Tracheal Tubes and Connectors First Edition; Cancels and Replaces ISO 5361-1: 1988,
ISO 5361-2: 1993, ISO 5361-3: 1984, ISO 5361-5: 1984 and ISO 7228: 1993; Corrected and Reprinted 12/15/1999
Tracheal Tubes - Part 4: Cole Type Second Edition
Anaesthetic Reservoir Bags Fourth Edition
Anaesthetic and Respiratory Equipment - Oropharyngeal Airways Third Edition
Anaesthetic and Respiratory Equipment - Tracheostomy Tubes - Part 1: Tubes and Connectors for Use in Adults Fourth Edition;
Replaces ISO 5366-2:1993; Corrected and Reprinted 09/01/2001
Anaesthetic and Respiratory Equipment - Tracheostomy Tubes - Part 3: Paediatric Tracheostomy Tubes Second Edition; Technical
Corrigendum 1: 1/15/2003
Breathing Tubes Intended for Use with Anaesthetic Apparatus and Ventilators Fourth Edition
Condensed Phosphates for Industrial Use (Including Foodstuffs) - Determination of Calcium Content - Flame Atomic Absorption
Spectrometric Method First Edition
Starch Hydrolysis Products - Determination of Reducing Power and Dextrose Equivalent - Lane and Eynon Constant Titre Method
First Edition; (CENELEC EN ISO 5377: 1994)
Starches and Derived Products - Determination of Nitrogen Content by the Kjeldahl Method - Spectrophotometric Method First Edition
Starches and Derived Products - Determination of Sulfur Dioxide Content - Acidimetric Method and Nephelometric Method First
Edition; (CEN EN 1185: 1994)
Starch Hydrolysis Products - Determination of Water Content - Modified Karl Fischer Method First Edition
Stationary Air Compressors - Safety Rules and Code of Practice First Edition
Turbocompressors Performance test code Second Edition
Compressors - Classification First Edition
Pneumatic tools and machines Vocabulary Machines portatives pneumatiques et machines pneumatiques Vocabulaire
Rotary Tools for Threaded Fasteners - Performance Test Method Second Edition
ISO
ISO
ISO
ISO
5395
5396
5397
5398-1
Power Lawn-Mowers, Lawn Tractors, Lawn and Garden Tractors, Professional Mowers, and Lawn and Garden Tractors with Mowing
Attachments - Definitions, Safety Requirements and Test Procedures First Edition; Amendment 1-1992
Hardmetal Heading Dies - Terminology First Edition
Leather - Determination of Nitrogen Content andHide Substance" - Titrimetric Method First Edition"
Leather ù Chemical determination of chromic oxide content ù Part 1: Quantification by titration First Edition
ISO
ISO
ISO
5398-3
5399
5400
Leather ù Chemical determination of chromic oxide content ù Part 3: Quantification by atomic absorption spectrometry First Edition
Leather - Determination of Water-Soluble Magnesium Salts - EDTA Titrimetric Method First Edition
Leather - Determination of Total Silicon Content - Reduced Molybdosilicate Spectrometric Method First Edition
ISO
ISO
5402
5403
Leather Physical and mechanical tests Determination of flex resistance by flexometer method First Edition; IULTCS/IUP 20
Leather Physical and mechanical tests Determination of water resistance of flexible leather First Edition; IULTCS/IUP 10
ISO
ISO
ISO
ISO
5404
5407
5408
5413
ISO
5414-1
ISO
ISO
ISO
ISO
ISO
5414-2
5415
5416
5417
5418-1
Leather Physical and mechanical tests Determination of the water resistance of heavy leathers First Edition; IULTCS/IUP 11
As-Sintered Hardmetal Pellets Used in Heading Dies - Dimensions and Tolerances First Edition
Cylindrical Screw Threads - Vocabulary First Edition
Machine Tools - Positive Drive of Morse Tapers Second Edition
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools Part 1: Dimensions of the driving system of tool
shanks Third Edition
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools Part 2: Connecting dimensions of chucks and
designation
Reduction Sleeves with 7/24 External and Morse Internal Taper and Incorporated Screw First Edition
Direct Reduced Iron - Determination of Metallic Iron - Bromine-Methanol Titrimetric Method Third Edition
Refractory Bricks for Use in Rotary Kilns - Dimensions First Edition
Iron ores . Determination of copper . Part 1: 2,2'-Biquinolyl spectrophotometric method Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5418-2
5419
5420
5421
5422
5423
5426
ISO
ISO
5426-2
5427
Iron ores Determination of copper Part 2: Flame atomic absorption spectrometric method First Edition;:1986 [Replaced: ISO 4693]
Twist Drills - Terms, Definitions and Types Forets - Termes, Definitions Et Types First Edition; Corrigendum 1- 1996
Reamers - Terms, Definitions and Types First Edition
Ground High Speed Steel Tool Bits First Edition
Road Vehicles - Anchorages for Towing Ropes, Cables or Bars First Edition
Moulded Plastics Footwear - Lined or Unlined Polyurethane Boots for General Industrial Use - Specification First Edition
Extension of the Latin Alphabet Coded Character Set for Bibliographic Information Interchange Second Edition
Information and Documentation - Extension of the Latin Alphabet Coded Character Set for Bibliographic Information Interchange Part 2: Latin Characters Used in Minor European Languages and Obsolete Typography First Edition
Extension of the Cyrillic Alphabet Coded Character Set for Bibliographic Information Interchange First Edition
ISO
ISO
ISO
ISO
ISO
ISO
5428
5429
5431
5432
5433
5435
ISO
5436-1
ISO
ISO
5436-2
5437
ISO
ISO
5438
5439
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5440
5444
5445
5446
5447
5448
5449
5450
5451
5452
5453
5454
5455
5456-1
5456-2
5456-3
5456-4
5457
5458
5459
5468
Greek Alphabet Coded Character Set for Bibliographic Information Interchange Second Edition
Coated abrasives Flap wheels with incorporated flanges or separate flanges Second edition
Leather - Wet Blue Goat Skins - Specification First Edition
Leather - Wet Blue Sheep Skins - Specification First Edition
Leather - Bovine Wet Blue - Specification First Edition
Rubber Compounding Ingredients - Carbon Black - Determination of Tinting Strength Third Edition
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Measurement Standards - Part 1: Material Measures
First Edition; Together with ISO 5436-2 Replaces ISO 5436
Geometrical Product Specifications (GPS) Surface texture: Profile method; Measurement standards Part 2: Software measurement
standards First Edition; Technical Corrigendum 1: 12/01/2006
Acid-Grade and Ceramic-Grade Fluorspar - Determination of Barium Sulfate Content - Gravimetric Method Second Edition
Acid-Grade and Ceramic-Grade Fluorspar - Determination of Silica of Silica Content - Reduced-Molybdosilicate Spectrometric
Method Second Edition
Acid-Grade Fluorspar - Determination of Available Fluorine Content - Potentiometric Method After Distillation First Edition
Sodium Hexafluorosilicate for Industrial Use - Determination of Phosphate Content - Molybdovanadate Spectrophotometric Method
First Edition
Sodium Hexafluorosilicate for Industrial Use - Determination of Loss in Mass at 105 Degrees Celsius First Edition
Ferrosilicon - Specification and Conditions of Delivery First Edition
Ferromanganese - Specification and Conditions of Delivery First Edition
Ferrosilicomanganese - Specification and Conditions of Delivery First Edition
Ferrochromium - Specification and Conditions of Delivery First Edition
Ferrosilicochromium - Specification and Conditions of Delivery First Edition
Ferrotungsten - Specification and Conditions of Delivery First Edition
Ferrovanadium - Specification and Conditions of Delivery First Edition
Ferromolybdenum - Specification and Conditions of Delivery First Edition
Ferroniobium - Specification and Conditions of Delivery First Edition
Ferrotitanium - Specification and Conditions of Delivery First Edition
Technical Drawings - Scales First Edition
Technical Drawings - Projection Methods - Part 1: Synopsis First Edition
Technical Drawings - Projection Methods - Part 2: Orthographic Representations First Edition
Technical Drawings - Projection Methods - Part 3: Axonometric Representations First Edition
Technical Drawings - Projection Methods - Part 4: Central Projection First Edition; Corrected and Reprinted 08/01/1998
Technical Product Documentation - Sizes and Layout of Drawing Sheets Second Edition
Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Positional Tolerancing Second Edition
Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical Tolerances First Edition
Rotary and rotary impact masonry drill bits with hardmetal tips Dimensions Third Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5470-1
5470-2
5473
5478
5479
5480
5483
5485
5488
5489
5492
5495 CORR 1
5495
Rubber or Plastics Coated Fabrics - Determination of Abrasion Resistance - Part 1: Taber Abrader First Edition
Rubber or Plastics Coated Fabrics - Determination of Abrasion Resistance - Part 2: Martindale Abrader First Edition
Rubber- or Plastics-Coated Fabrics - Determination of Crush Resistance Second Edition
Rubber Determination of styrene content Nitration method Third Edition
Statistical Interpretation of Data - Tests for Departure from the Normal Distribution First Edition
Shipbuilding - Guardrails for Cargo Ships First Edition
Ships and Marine Technology - Drain Facilities from Oil and Water Tanks Second Edition
Shipbuilding - Inland Vessels - Fixed Steel Deck Stairs First Edition
Shipbuilding - Accommodation Ladders First Edition
Shipbuilding - Embarkation Ladders Second Edition
Sensory Analysis - Vocabulary First Edition
Sensory analysis ù Methodology ù Paired comparison test TECHNICAL CORRIGENDUM 1 Third Edition
Sensory analysis ù Methodology ù Paired comparison test Third Edition
ISO
5496
ISO
ISO
ISO
ISO
ISO
5497
5498
5500
5502
5506
ISO
5507
ISO
ISO
ISO
5508
5509
5510
ISO
ISO
ISO
5511
5515
5516
Oilseeds, vegetable oils and fats Nomenclature Graines olÚagineuses, corps gras d'origine vÚgÚtale Nomenclature Third Edition
Animal and Vegetable Fats and Oils - Analysis by Gas Chromatography of Methyl Esters of Fatty Acids Second Edition; (CEN EN ISO
5508: 1995)
Animal and Vegetable Fats and Oils - Preparation of Methyl Esters of Fatty Acids Second Edition
Animal Feeding Stuffs - Determination of Available Lysine First Edition
Oilseeds - Determination of Oil Content - Method Using Continuous-Wave Low-Resolution Nuclear Magnetic Resonance
Spectrometry (Rapid Method) Second Edition; CEN EN ISO 5511:1996; Corrigendum 1 02/15/1997
Fruits, Vegetables and Derived Products - Decomposition of Organic Matter Prior to Analysis - Wet Method First Edition
Fruits, Vegetables and Derived Products - Decomposition of Organic Matter Prior to Analysis - Ashing Method First Edition
ISO
5517
Fruits, Vegetables and Derived Products - Determination of Iron Content - 1,10-Phenanthroline Photometric Method First Edition
ISO
5518
Fruits, vegetables and derived products ù Determination of benzoic acid content ù Spectrophotometric method Second edition
Sensory analysis Methodology Initiation and training of assessors in the detection and recognition of odours Analyse sensorielle
MÚthodologie Initiation et entra¯ nement des sujets Ó la dÚtection et Ó la reconnaissance des odeurs Second Edition
Sensory Analysis - Methodology - Guidelines for the Preparation of Samples for Which Direct Sensory Analysis Is Not Feasible First
Edition
Agricultural Food Products - Determination of Crude Fibre Content - General Method First Edition
Oilseed Residues - Sampling Second Edition
Oilseed Residues - Preparation of Test Samples Second Edition
Soya Bean Products - Determination of Urease Activity Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5519
5520
5521
5522
5523
5524
5525
5526
5527
5529
ISO
5530-1
ISO
5530-2
ISO
5530-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5530-4
5534
5536
5537
5538
5542
5543
5544
5545
5546
5547
5548
5549
5550
5553
5554
5555
Fruits, Vegetables and Derived Products - Determination of Sorbic Acid Content First Edition
Fruits, Vegetables and Derived Products - Determination of Alkalinity of Total Ash and of Water-Soluble Ash First Edition
Fruits, Vegetables and Derived Products - Qualitative Method for the Detection of Sulphur Dioxide First Edition
Fruits, Vegetables and Derived Products - Determination of Total Sulphur Dioxide Content First Edition
Liquid Fruit and Vegetable Products - Determination of Sulphur Dioxide Content (Routine Method) First Edition
Tomatoes - Guide to Cold Storage and Refrigerated Transport Second Edition
Potatoes - Storage in the Open (in Clamps) Second Edition
Cereals, Pulses and Other Food Grains - Nomenclature First Edition
Cereals - Vocabulary First Edition
Wheat - Determination of the sedimentation index - Zeleny test Third Edition
Wheat Flour - Physical Characteristics of Doughs - Part 1: Determination of Water Absorption and Rheological Properties Using a
Farinograph Second Edition
Wheat Flour - Physical Characteristics of Doughs - Part 2: Determination of Rheological Properties Using an Extensograph Second
Edition
Wheat Flour - Physical Characteristics of Doughs - Part 3: Determination of Water Absorption and Rheological Properties Using a
Valorigraph First Edition
Wheat Flour (Triticum Aestivum L.) - Physical Characteristics of Doughs - Part 4: Determination of Rheological Properties Using an
Alveograph Third Edition
Cheese and Processed Cheese - Determination of Total Solids Content (Reference Method) Second Edition; IDF 4: 2004
Milk Fat Products - Determination of Water Content - Karl Fischer Method First Edition; IDF 23
Dried milk Determination of moisture content (Reference method) First Edition
Milk and Milk Products - Sampling - Inspection by Attributes Second Edition
Milk - Determination of Protein Content - Amido Black Dye-Binding Method (Routine Method) First Edition
Caseins and Caseinates - Determination of Fat Content - Gravimetric Method (Reference Method) Second Edition
Caseins - Determination ofFixed Ash" (Reference Method) First Edition"
Rennet Caseins and Caseinates - Determination of Ash (Reference Method) First Edition
Caseins and caseinates - Determination of pH (Reference Method) First Edition
Caseins - Determination of Free Acidity (Reference Method) First Edition
Caseins and Caseinates - Determination of Lactose Content - Photometric Method Second Edition
Caseins and Caseinates - Determination of Protein Content (Reference Method) First Edition
Caseins and caseinates Determination of moisture content (Reference method) Second Edition; See also IDF 78
Meat and Meat Products - Detection of Polyphosphates First Edition
Meat Products - Determination of Starch Content (Reference Method) First Edition
Animal and Vegetable Fats and Oils - Sampling Third Edition
ISO
5558
Animal and Vegetable Fats and Oils - Detection and Identification of Antioxidants - Thin-Layer Chromatographic Method First Edition
ISO
ISO
ISO
ISO
ISO
5559
5560
5561
5562
5563
ISO
ISO
ISO
ISO
ISO
ISO
5564
5565-1
5565-2
5566
5567
5572
ISO
5576
ISO
5577
ISO
ISO
ISO
ISO
5579
5580
5593 AMD 1
5593
ISO
5596
ISO
ISO
5597
5598
ISO
5599-1 CORR 1
ISO
5599-1
ISO
5599-2 CORR 1
ISO
ISO
ISO
5599-2
5600
5603
Dehydrated Onion (Allium Cepa Linnaeus) - Specification Third Edition
Dehydrated Garlic (Allium Sativum L.) - Specification Third Edition
Black Caraway and Blond Caraway (Carum Carvi Linnaeus), Whole - Specification Second Edition
Turmeric, Whole or Ground (Powdered) - Specification First Edition
Dried Peppermint (Mentha Piperita Linnaeus) - Specification First Edition
Black Pepper and White Pepper, Whole or Ground - Determination of Piperine Content - Spectrophotometric Method First Edition
Vanilla [Vanilla Fragrans (Salisbury) Ames] - Part 1: Specification First Edition
Vanilla [Vanilla Fragrans (Salisbury) Ames] - Part 2: Test Methods First Edition
Turmeric - Determination of Colouring Power - Spectrophotometric Method First Edition
Dehydrated Garlic - Determination of Volatile Organic Sulphur Compounds First Edition
Shipbuilding and Marine Structures - Numbering of Equipment and Structural Elements in Ships First Edition
Non-Destructive Testing - Industrial X-Ray and Gamma-Ray Radiology - Vocabulary Essais Non Destructifs - Radiologie Industrielle
Aux Rayons X Et Gamma - Vocabulaire First Edition
Non-Destructive Testing - Ultrasonic Inspection - Vocabulary Essais Non Destructifs - Controle Par Ultrasons - Vocabulaire First
Edition
Non-Destructive Testing - Radiographic Examination of Metallic Materials by X- and Gamma-Rays - Basic Rules Second Edition
Non-Destructive Testing - Industrial Radiographic Illuminators - Minimum Requirements First Edition
Rolling bearings ù Vocabulary AMENDMENT 1 Roulements ù Vocabulaire AMENDEMENT 1 First Edition
Rolling Bearings - Vocabulary Roulements - Vocabulaire Second Edition
Hydraulic Fluid Power - Gas-Loaded Accumulators with Separator - Ranges of Pressures and Volumes and Characteristic Quantities
Second Edition
Hydraulic Fluid Power - Cylinders - Housings for Piston and Rod Seals in Reciprocating Applications - Dimensions and Tolerances
First Edition
Fluid Power Systems and Components - Vocabulary First Edition
Pneumatic Fluid Power - Five-Port Directional Control Valves - Part 1: Mounting Interface Surfaces without Electrical Connector Third
Edition
Pneumatic Fluid Power - Five-Port Directional Control Valves - Part 1: Mounting Interface Surfaces without Electrical Connector Third
Edition
Pneumatic fluid power ù Five-port directional control valves ù Part 2: Mounting interface surfaces with optional electrical connector
TECHNICAL CORRIGENDUM 1
Pneumatic Fluid Power - Five-Port Directional Control Valves - Part 2: Mounting Interface Surfaces with Optional Electrical Connector
Second Edition; Amendment 1: 8/15/2004
Rubber - Determination of adhesion to rigid materials using conical shaped parts Third Edition
Rubber, Vulcanized - Determination of Adhesion to Wire Cord First Edition Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5608
5609
5610
5611
5612
5613
5614
Turning and Copying Tool Holders and Cartridges for Indexable Inserts - Designation Third Edition
Boring Bars for Indexable Inserts - Dimensions Fourth Edition
Single-Point Tool Holders for Turning and Copying, for Indexable Inserts - Dimensions Fifth Edition
Cartridges, Type A, for Indexable Inserts - Dimensions Third Edition
Mining - Scraper Bars for Chain Conveyors Second Edition
Mining - Drive Sprocket Assemblies for Chain Conveyors First Edition
Locked Coil Wire Ropes for Mine Hoisting - Technical Delivery Requirements First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5620-1
5620-2
5621
5625
5626
5627
5628
5629
5630-1
Shipbuilding and Marine Structures - Filling Connection for Drinking Water Tanks - Part 1: General Requirements First Edition
Shipbuilding and Marine Structures - Filling Connection for Drinking Water Tanks - Part 2: Components First Edition
Shipbuilding - Bilge Mud Boxes for Machinery Spaces and Tunnels - General Design Characteristics First Edition
Shipbuilding - Welded Bulkhead Pieces with Flanges for Steel Pipework - PN 6, PN 10 and PN 16 First Edition
Paper - Determination of Folding Endurance Second Edition
Paper and Board - Determination of Smoothness (Bekk Method) Second Edition: Corrigendum 6/15/2002
Paper and Board - Determination of Bending Stiffness by Static Methods - General Principles First Edition
Paper and Board - Determination of Bending Stiffness - Resonance Method First Edition
Paper and Board - Accelerated Ageing - Part 1: Dry Heat Treatment at 105 Degrees Celsius Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5630-3
5630-4
5631
5633
5635
5636-1
5636-3
5636-4
5636-5
5637
5638
5647
ISO
ISO
5652
5653
ISO
5654-1
Paper and Board - Accelerated Ageing - Part 3: Moist Heat Treatment at 80 Degrees C and 65% Relative Humidity Second Edition
Paper and Board - Accelerated Ageing - Part 4: Dry Heat Treatment at 120 or 150 Degrees Celsius First Edition
Paper and Board - Determination of Colour (C/2 Degrees) - Diffuse Reflectance Method First Edition
Paper and Board - Determination of Resistance to Water Penetration First Edition
Paper - Measurement of Dimensional Change After Immersion in Water First Edition; (Erratum-1982)
Paper and Board - Determination of Air Permeance (Medium Range) - Part 1: General Method First Edition
Paper and Board - Determination of Air Permeance (Medium Range) - Part 3: Bendtsen Method Second Edition
Paper and board Determination of air permeance (medium range) Part 4: Sheffield method Second Edition
Paper and board Determination of air permeance and air resistance (medium range) Part 5: Gurley method Second Edition
Paper and Board - Determination of Water Absorption After Immersion in Water Second Edition
Solid Fibreboard - Determination of Grammage of Single Layers First Edition
Paper and Board - Determination of Titanium Dioxide Content First Edition
Information Processing - 9-Track, 12,7 mm (0.5 in) Wide Magnetic Tape for Information Interchange - Format and Recording, Using
Group Coding at 246 cpmm (6 250 cpi) Second Edition
Information Processing - Interchangeable Magnetic Twelve-Disk Pack (200 Mbytes) First Edition
Information Processing - Data Interchange on 200 mm (8 in) Flexible Disk Cartridges Using Two-Frequency Recording at 13 262
ftprad on One Side - Part 1: Dimensional, Physical and Magnetic Characteristics Second Edition; CAN/CGSB-186.1-93
Information Processing - Data Interchange on 200 mm (8 in) Flexible Disk Cartridges Using Two-Frequency Recording at 13 262
ftprad, 1,9 tpmm (48 tpi), on One Side - Part 2: Track Format Second Edition
Photography - Industrial Radiographic Films (Roll and Sheet) and Metal Intensifying Screens - Dimensions Third Edition
Reaction to Fire Tests - Ignitability of Building Products Using a Radiant Heat Source Second Edition
Reaction to fire tests Spread of flame Part 1: Guidance on flame spread First Edition
Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration Second
Edition
Reaction to Fire Tests - Spread of Flame - Part 4: Intermediate-Scale Test of Vertical Spread of Flame with Vertically Oriented
Specimen First Edition
Plastics - Smoke Generation - Part 1: Guidance on Optical-Density Testing First Edition
Plastics Smoke generation Part 2: Determination of optical density by a single-chamber test Second Edition
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method)
Second Edition
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement)
First Edition
Petroleum Products - Hydrocarbon Liquids - Determination of Refractive Index First Edition
ISO
ISO
ISO
ISO
5654-2
5655
5657
5658-1
ISO
5658-2
ISO
ISO
ISO
5658-4
5659-1
5659-2
ISO
5660-1
ISO
ISO
5660-2
5661
ISO
ISO
ISO
5663
5664
5666
ISO
ISO
ISO
5667-1
5667-3
5667-4
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5667-5
5667-6
5667-7
5667-8
5667-9
5667-10
5667-11
5667-12
Water Quality - Determination of Kjeldahl Nitrogen - Method After Mineralization with Selenium First Edition; (CEN EN 25663: 1993)
Water Quality - Determination of Ammonium - Distillation and Titration Method First Edition
Water Quality - Determination of Mercury First Edition
Water quality Sampling Part 1: Guidance on the design of sampling programmes and sampling techniques Second Edition;
Replaces ISO 5667-2:1991, CEN EN 25667-1:1993, and CEN EN 25667-2:1993 [Replaced: ISO 5667-2]
Water quality Sampling Part 3: Guidance on the preservation and handling of water samples Third Edition
Water Quality - Sampling - Part 4: Guidance on Sampling from Lakes, Natural and Man-Made First Edition
Water quality Sampling Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems Second
Edition
Water Quality - Sampling - Part 6: Guidance on sampling of rivers and streams Second Edition
Water Quality - Sampling - Part 7: Guidance on Sampling of Water and Steam in Boiler Plants First Edition
Water Quality - Sampling - Part 8: Guidance on the Sampling of Wet Desposition First Edition
Water Quality - Sampling - Part 9: Guidance on Sampling from Marine Waters First Edition
Water Quality - Sampling - Part 10: Guidance on Sampling of Waste Waters First Edition
Water Quality - Sampling - Part 11: Guidance on Sampling of Groundwaters First Edition
Water Quality - Sampling - Part 12: Guidance on Sampling of Bottom Sediments First Edition
ISO
5667-13
Water Quality - Sampling - Part 13: Guidance on Sampling of Sludges from Sewage and Water Treatment Works First Edition
ISO
ISO
ISO
ISO
ISO
ISO
5667-14
5667-15
5667-16
5667-17
5667-18
5667-19
ISO
5669
ISO
5670
ISO
5673-1
ISO
5673-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5674
5675
5676
5678
5679
5680
5681
5682-1
5682-2
ISO
5682-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5687
5690-1
5690-2
5691
5692-1
5692-2 CORR 1
5692-2
Water Quality - Sampling - Part 14: Guidance on Quality Assurance of Environmental Water Sampling and Handling First Edition
Water Quality - Sampling - Part 15: Guidance on Preservation and Handling of Sludge and Sediment Samples First Edition
Water Quality - Sampling - Part 16: Guidance on Biotesting of Samples First Edition
Water Quality - Sampling - Part 17: Guidance on Sampling of Suspended Sediments First Edition
Water Quality - Sampling - Part 18: Guidance on Sampling of Groundwater at Contaminated Sites First Edition
Water quality Sampling Part 19: Guidance on sampling of marine sediments First Edition
Agricultural Trailers and Trailed Equipment - Braking Cylinders - Specifications First Edition; (Corrected and Reprinted - 1984)
Agricultural Trailers - Single-Acting Telescopic Tipping Cylinders - 25 MPa (250 Bar) Series - Types 1, 2, and 3 - Interchangeability
Dimensions First Edition
Agricultural tractors and machinery Power take-off drive shafts and powerinput connection Part 1: General manufacturing and safety
requirements First Edition; Replaces ISO 5673:1993
Agricultural tractors and machinery Power take-off drive shafts and powerinput connection Part 2: Specification for use of PTO drive
shafts, and position and clearance of PTO drive line and PIC for various attachments First Edition; Replaces ISO 5673:1993
Tractors and machinery for agriculture and forestry Guards for power take-off (PTO) drive-shafts Strength and wear tests and
acceptance criteria Second Edition; Replaces ISO 5674-1:1992 and ISO 5674-2:1992
Agricultural Tractors and Machinery - General Purpose Quick-Action Hydraulic Couplers Second Edition
Tractors and Machinery for Agriculture and Forestry - Hydraulic Coupling - Braking Circuit First Edition
Agricultural Machinery - Equipment for Working the Soil - S-Tines: Main Dimensions and Clearance Zones Second Edition
Equipment for Working the Soil - Disks - Classification, Main Fixing Dimensions and Specifications First Edition
Equipment for Working Soil - Tines and Shovels for Cultivators - Main Fixing Dimensions First Edition
Equipment for Crop Protection - Vocabulary Second Edition
Equipment for Crop Protection - Spraying Equipment - Part 1: Test Methods for Sprayer Nozzles Second Edition
Equipment for Crop Protection - Spraying Equipment - Part 2: Test Methods for Hydraulic Sprayers Second Edition
Equipment for Crop Protection - Spraying Equipment - Part 3: Test Method for Volume/Hectare Adjustment Systems of Agricultural
Hydraulic Pressure Sprayers First Edition; Corrected and Reprinted:1997-07-01; BS 6356: Part 10: 1997
Equipment for Harvesting - Combine Harvesters - Determination and Designation of Grain Tank Capacity and Unloading Device
Performance Second Edition
Equipment for Distributing Fertilizers - Test Methods - Part 1: Full Width Fertilizer Distributors Second Edition
Equipment for Distributing Fertilizers - Test Methods - Part 2: Fertilizer Distributors in Lines First Edition
Equipment for Planting - Potato Planters - Method of Testing First Edition
Agricultural vehicles Mechanical connections on towed vehicles Part 1: Dimensions for hitch rings First Edition
Agricultural vehicles ù Mechanical connections on towed vehicles ù Part 2: Coupling ring 40 with socket First Edition
Agricultural vehicles ù Mechanical connections on towed vehicles ù Part 2: Coupling ring 40 with socket First Edition
ISO
ISO
ISO
5696
5697
5699
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5700
5702
5703
5704
5707
5708
5710
5711
5713
5715
ISO
ISO
5718
5721
ISO
5725-1
ISO
5725-2
ISO
5725-3
ISO
5725-4
ISO
5725-5
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5725-6
5734
5738
5739
5740
5742
5743
5744
Trailed Agricultural Vehicles - Brakes and Braking Devices - Laboratory Test Method First Edition
Agricultural and Forestry Vehicles - Determination of Braking Performance First Edition
Agricultural Machines, Implements and Equipment - Dimensions for Mechanical Loading with Bulk Goods First Edition
Tractors for agriculture and forestry Roll-over protective structures (ROPS) Tractors for agriculture and forestry Roll-over protective
structures (ROPS) Static test method and acceptance conditions Fourth Edition
Equipment for Harvesting - Combine Harvester Component Parts - Equivalent Terms First Edition
Equipment for Vine Cultivation and Wine Making - Grape Presses - Methods of Test First Edition
Equipment for Vine Cultivation and Wine Making - Grape-Harvesting Machinery - Test Methods First Edition
Milking machine installations ù Construction and performance Third edition
Refrigerated Bulk Milk Tanks First Edition
Equipment for Internal Farm Work and Husbandry - Continuous Manure Scraper Conveyors for Stalls First Edition
Tractors and Machinery for Agriculture and Forestry - Wheel-to-Hub Fixing Dimensions First Edition
Equipment for Working the Soil - Fixing Bolts for Soil Working Elements First Edition
Equipment for Harvesting - Dimensional Compatibility of Forage Harvesting Machinery First Edition
Harvesting Equipment - Blades for Agricultrual Rotary Mowers - Requirements First Edition; Replaces ISO 5718-1 and 5718-2
Tractors for Agriculture - Operator s Field of Vision Second Edition
Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 1: General Principles and Definitions First Edition;
Corrigendum 1-1998
Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 2: Basic Method for the Determination of
Repeatability and Reproducibility of a Standard Measurement Method First Edition; Technical Corrigendum 1: 5/15/2002
Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 3: Intermediate Measures of the Precision of a
Standard Measurement Method First Edition; Replaces ISO 5725; Corrigendum 1 10/15/2001
Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 4: Basic Methods for the Determination of the
Trueness of a Standard Measurement Method First Edition;
Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 5: Alternative Methods for the Determination of the
Precision of a Standard Measurement Method First Edition; Corrigendum 1: 8/15/2005
Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 6: Use in Practice of Accuracy Values First Edition;
Replaces ISO 5725; Corrigendum 1:10/15/2001
Acceptance Conditions of Mechanical Dividing Heads for Machine Tools - Testing of Accuracy Second Edition
Milk and milk products Determination of copper content Photometric method (Reference method) Second Edition
Caseins and Caseinates - Determination of Dontents of Scorched Particles and of Extraneous Matter Second Edition
Road Vehicles - Rear View Mirrors - Test Method for Determining Reflectance Second Edition
Pliers and nippers Nomenclature Pinces et tenailles Nomenclature Second Edition
Pliers and nippers General technical requirements Third Edition
Pliers and nippers Methods of test Third Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5745
5746
5747
5748
5749
5751-1 CORR 1
5751-1
5751-2
5751-3
5752
5753
5754
5755
ISO
ISO
ISO
5758
5763
5764
ISO
5765-1
ISO
ISO
5765-2
5766
ISO
5767
ISO
5768
Pliers and nippers Pliers for gripping and manipulating Dimensions and test values Third Edition
Pliers and nippers Engineer s and Lineman s pliers Dimensions and test values Third Edition
Pliers and Nippers - Lever Assisted Side Cutting Pliers, End and Diagonal Cutting Nippers - Dimensions Second Edition
Pliers and nippers End cutting nippers Dimensions and test values Third Edition
Pliers and nippers Diagonal cutting nippers Dimensions and test values Third Edition
Motorcycle tyres and rims (metric series) ù Part 1: Design guides TECHNICAL CORRIGENDUM 1 Sixth Edition
Motorcycle tyres and rims (metric series) ù Part 1: Design guides Sixth Edition
Motorcycle Tyres and Rims (Metric Series) - Part 2: Tyre Dimensions and Load-Carrying Capacities Fifth Edition
Motorcycle Tyres and Rims (Metric Series) - Part 3: Range of Approved Rim Contours Fifth Edition
Metal Valves for Use in Flanged Pipe Systems - Face-to-Face and Centre-to-Face Dimensions Second Edition
Rolling Bearings - Radial Internal Clearance Second Edition
Sintered Metal Materials, Excluding Hardmetals - Unnotched Impact Test Piece First Edition; (CEN EN 25754: 1993)
Sintered Metal Materials - Specifications Second Edition
Cinematography - Labelling of Containers for Motion-Picture Film and Magnetic Materials - Minimum Information for Exchange of
Materials Second Edition
Photography - Electronic Flash Equipment - Automatic Control of Exposure Second Edition; (ANSI PH3.416-1992)
Milk - Determination of Freezing Point - Thermistor Cryoscope Method (Reference Method) Second Edition; IDF 108
Dried Milk, Dried Ice-Mixes and Processed Cheese - Determination of Lactose Content - Part 1: Enzymatic Method Utilizing the
Glucose Moiety of the Lactose First Edition
Dried Milk, Dried Ice-Mixes and Processed Cheese - Determination of Lactose Content - Part 2: Enzymatic Method Utilizing the
Galactose Moiety of the Lactose First Edition
Pallet Stackers and High-Lift Platform Trucks - Stability Tests Second Edition
Industrial Trucks Operating in Special Condition of Stacking with Mast Tilted Forward - Additional Stability Test Second Edition;
Amendment 1: 12-01-1999
Cinematography - Image Produced by Camera Aperture Type W on 16 mm Motion-Picture Film - Position and Dimensions Third
Edition
ISO
5771
Rubber Hose and Hose Assemblies for Transferring Anhydrous Ammonia - Specification Second Edition; Corrigendum 1: 1995
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5772
5774
5775-1
5775-2
5776
5778
5779
Rubber Hoses and Hose Assemblies for Measured Fuel Dispensing - Specification First Edition; Replaces ISO 5772-1: 1986
Plastics hoses Textile-reinforced types for compressed-air applications Specification Third Edition
Bicycle Tyres and Rims - Part 1: Tyre Designations and Dimensions Fifth Edition
Bicycle Tyres and Rims - Part 2: Rims Second Edition; Amendment 1:12/15/2001
Graphic Technology - Symbols for Text Correction First Edition
Ship amd Marine Technology - Small Weathertight Steel Hatches Second Edition
Shipbuilding - Ordinary Rectangular Windows - Positioning First Edition
ISO
5780
ISO
5781
ISO
5782-1
ISO
ISO
5782-2
5783
ISO
5784-1
ISO
5784-2
ISO
ISO
5784-3
5789
ISO
5790
ISO
5794-1 CORR 2
ISO
ISO
5794-1 CORR 1
5794-1
ISO
ISO
ISO
5794-2
5796
5797
ISO
5799
ISO
ISO
ISO
ISO
ISO
5800
5801
5802
5805
5806
ISO
5807
Shipbuilding - Side Scuttles - Positioning First Edition
Hydraulic Fluid Power - Pressure-Reducing Valves, Sequence Valves, Unloading Valves, Throttle Valves and Check Valves Mounting Surfaces Second Edition
Pneumatic Fluid Power - Compressed Air Filters - Part 1: Main Characteristics to Be Included in Supplier s Literature and ProductMarking Requirements Second Edition
Pneumatic Fluid Power - Compressed Air Filters - Part 2: Test Methods to determine the Main Characteristics to Be Included in
Supplier s Literature First Edition
Hydraulic Fluid Power - Code for Identification of Valve Mounting Surfaces and Cartridge Valve Cavities Second Edition
Fluid Power Systems and Components - Fluid Logic Circuits - Part 1: Symbols for Binary Logic and Related Functions First Edition
Fluid Power Systems and Components - Fluid Logic Circuits - Part 2: Symbols for Supply and Exhausts as Related to Logic Symbols
First Edition
Fluid Power Systems and Components - Fluid Logic Circuits - Part 3: Symbols for Logic Sequencers and Related Functions First
Edition
Fluorinated Hydrocarbons for Industrial Use - Determination of Non-Volatile Residue First Edition
Inorganic Chemical Products for Industrial Use - General Method for Determination of Chloride Content - Mercurimetric Method First
Edition
Rubber compounding ingredients ù Silica, precipitated, hydrated ù Part 1: Non-rubber tests TECHNICAL CORRIGENDUM 2 Third
edition
Rubber compounding ingredients ù Silica, precipitated, hydrated ù Part 1: Non-rubber tests TECHNICAL CORRIGENDUM 1 Third
edition
Rubber compounding ingredients ù Silica, precipitated, hydrated ù Part 1: Non-rubber tests Third edition
Rubber Compounding Ingredients - Silica, Precipitated, Hydrated - Part 2: Evaluation Procedures in Styrene-Butadiene Rubber
Second Edition
Rubber Compounding Ingredients - Natural Calcium Carbonate - Test Methods Second Edition
Ships and marine technology Windows and side scuttles for fire-resistant constructions First Edition; Replaces ISO 5797-1
Photography - Direct-Exposing Medical and Dental Radiographic Film/Process Systems - Determination of ISO Speed and ISO
Average Gradient Second Edition
Photography - Colour Negative Films for Still Photography - Determination of ISO Speed Second Edition; Technical Corrigendum
1:06-15-2001
Industrial Fans - Performance Testing Using Standardized Airways First Edition
Industrial Fans - Performance Testing in Situ First Edition
Mechanical Vibration and Shock - Human Exposure - Vocabulary Second Edition
Information Processing - Specification of Single-Hit Decision Tables First Edition
Information Processing - Documentation Symbols and Conventions for Data, Program and System Flowcharts, Program Network
Charts and System Resources Charts First Edition
ISO
ISO
ISO
ISO
5809
5810
5813
5814
ISO
5815-1
ISO
5815-2
ISO
5817 CORR 1
ISO
ISO
ISO
ISO
ISO
5817
5821
5822
5826
5827
ISO
ISO
ISO
ISO
ISO
5828
5829
5830
5832-1
5832-2
ISO
5832-3
ISO
ISO
ISO
5832-4
5832-5
5832-6
ISO
5832-7
ISO
ISO
5832-8
5832-9
ISO
ISO
5832-11
5832-12
Starches and Derived Products - Determination of Sulphated Ash First Edition
Starches and Derived Products - Determination of Chloride Content - Potentiometric Method First Edition
Water Quality - Determination of Dissolved Oxygen - Iodometric Method First Edition; (CEN EN 25813: 1992)
Water Quality - Determination of Dissolved Oxygen - Electrochemical Probe Method Second Edition
Water Quality - Determination of Biochemical Oxygen Demand after n Days (BODn) - Part 1: Dilution and Seeding Method with
Allylthiourea Addition First Edition; Replaces ISO 5815
Water Quality - Determination of Biochemical Oxygen Demand After n Days (BODn) - Part 2: Method for Undiluted Samples First
Edition; Replaces ISO 5815
Welding ù Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) ù Quality levels for imperfections
TECHNICAL CORRIGENDUM 1 Second Edition
Welding ù Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) ù Quality levels for imperfections
Second Edition
Resistance Spot Welding Electrode Caps First Edition
Spot Welding Equipment - Taper Plug Gauges and Taper Ring Gauges Second Edition
Resistance Welding Equipment - Transformers - General Specifications Applicable to All Transformers Second Edition
Spot Welding - Electrode Back-Ups and Clamps First Edition; (Corrected and Reprinted - 1985)
Resistance Welding Equipment - Secondary Connecting Cables with Terminals Connected to Water-Cooled Lugs - Dimensions and
Characteristics Second Edition
Resistance Spot Welding - Electrode Adaptors, Female Taper 1 : 10 First Edition
Resistance Spot Welding - Male Electrode Caps First Edition
Implants for surgery ù Metallic materials ù Part 1: Wrought stainless steel Fourth Edition
Implants for Surgery - Metallic Materials - Part 2: Unalloyed Titanium Third Edition
Implants for Surgery - Metallic Materials - Part 3: Wrought Titanium 6-Aluminium 4-Vanadium Alloy Third Edition; (CAN/CSA-Z310.8M91)
Implants for Surgery - Metallic Materials - Part 4: Cobalt- Chromium-Molybdenum Casting Alloy Second Edition; (CAN/CSA-Z310.9M91)
Implants for surgery Metallic materials Part 5: Wrought cobalt-chromium-tungsten-nickel alloy Third Edition
Implants for Surgery - Metallic Materials - Part 6: Wrought Cobalt-Nickel-Chromium-Molybdenum Alloy Second Edition
Implants for Surgery - Metallic Materials - Part 7: Forgeable and Cold-Formed Cobalt- Chromium-Nickel- Molybdenum-Iron Alloy
Second Edition
Implants for Surgery - Metallic Materials - Part 8: Wrought Cobalt-Nickel-Chromium-Molybdenum-Tungsten-Iron Alloy Second Edition
Implants for surgery ù Metallic materials ù Part 9: Wrought high nitrogen stainless steel Second Edition
Implants for Surgery - Metallic Materials - Part 11: Wrought Titanium 6-Aluminium 7-Niobium Alloy First Edition; CAN/CSAZ310.7:M91
Implants for surgery ù Metallic materials ù Part 12: Wrought cobalt-chromium-molybdenum alloy Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5833
5834-1 CORR
5834-1
5834-2
5834-3
5834-4
5834-5
ISO
5835
ISO
5836
ISO
ISO
ISO
ISO
ISO
ISO
5837-1
5837-2
5838-1
5838-2
5838-3
5840
ISO
5841-2
ISO
ISO
ISO
5841-3
5843-1
5843-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5843-3
5843-4
5843-5
5843-6
5843-8
5843-9
5843-10
ISO
5845-1
ISO
5845-2
Implants for Surgery - Acrylic Resin Cements Second Edition
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form Third edition
Implants for surgery Ultra-high-molecular-weight polyethylene Part 2: Moulded forms Third Edition
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 3: Accelerated ageing methods First Edition
Implants for surgery Ultra-high molecular weight polyethylene Part 4: Oxidation index measurement method First edition
Implants for surgery Ultra-high-molecular-weight polyethylene Part 5: Morphology assessment method First edition
Implants for Surgery - Metal Bone Screws with Hexagonal Drive Connection, Spherical Under-Surface of Head, Asymmetrical Thread
- Dimensions First Edition
Implants for Surgery - Metal Bone Plates - Holes Corresponding to Screws with Asymmetrical Thread and Spherical Under-Surface
First Edition
Implants for Surgery - Intramedullary Nailing Systems - Part 1: Intramedullary Nails with Cloverleaf or V-Shaped Cross-Section First
Edition
Implants for Surgery - Intramedullary Nailing Systems - Part 2: Medullary Pins First Edition
Implants for Surgery - Skeletal Pins and Wires - Part 1: Material and Mechanical Requirements Second Edition
Implants for Surgery - Skeletal Pins and Wires - Part 2: Steinmann Skeletal Pins - Dimensions First Edition
Implants for Surgery - Skeletal Pins and Wires - Part 3: Kirschner Skeletal Wires First Edition
Cardiovascular Implants - Cardiac Valve Prostheses Fourth Edition
Implants for Surgery - Cardiac Pacemakers - Part 2: Reporting of Clinical Performance of Populations of Pulse Generators or Leads
Second Edition
Implants for Surgery - Cardiac Pacemakers - Part 3: Low-Profile Connectors (IS-1) for Implantable Pacemakers Second Edition;
TECHNICAL CORRIGENDUM 1: 11/15/2003
Aerospace Construction - List of Equivalent Terms - Part 1: Aerospace Electrical Equipment First Edition
Aerospace - List of Equivalent Terms - Part 2: Aerospace Rivets Second Edition
Aerospace - List of Equivalent Terms - Part 3: Aerospace Bolts and Nuts Aronautique Et Espace - Liste De Termes Equivalents Partie 3: Boulonnerie Pour Les Constructions Aerospatiales Second Edition
Aerospace - List of Equivalent Terms - Part 4: Flight Dynamics Second Edition
Aerospace - List of Equivalent Terms - Part 5: Environmental and Operating Conditions for Aircraft Equipment First Edition
Aerospace - List of Equivalent Terms - Part 6: Standard Atmosphere First Edition
Aerospace - List of Equivalent Terms - Part 8: Aircraft Reliability First Edition
Aerospace - List of Equivalent Terms - Part 9: Aircraft First Edition
Aerospace - List of Equivalent Terms - Part 10: Aircraft Structure First Edition
Technical Drawings - Simplified Representation of the Assembly of Parts with Fasteners - Part 1: General Principles First Edition
Technical Drawings - Simplified Representation of the Assembly of Parts with Fasteners - Part 2: Rivets for Aerospace Equipment
First Edition
ISO
ISO
ISO
5855-1
5855-2
5855-3
Aerospace - MJ Threads - Part 1: General Requirements Third Edition
Aerospace - MJ Threads - Part 2: Limit Dimensions for Bolts and Nuts Third Edition
Aerospace - MJ Threads - Part 3: Limit Dimensions for Fittings for Fluid Systems Second Edition
Aerospace - Screws, 100 Degree Normal Countersunk Head, Internal Off-Set Cruciform Ribbed Drive, Normal Shank, Short or
Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa Dimensions First Edition
Aerospace - Alloy Steel Protruding Head Bolts with Strength Classification 1 250 MPa and MJ Threads - Procurement Specification
First Edition
Aerospace - Nuts, Self-Locking, with Maximum Operating Temperature Less Than or Equal to 425 Degrees Celsius - Procurement
Specification Second Edition; Corrected and Reprinted 11/15/2000
Aerospace - Graphic Symbols for Schematic Drawings of Hydraulic and Pneumatic Systems and Components First Edition
ISO Inch Screw Threads - Allowances and Tolerances Second Edition
Aircraft - 2 and 3A Plug-In Base Change-Over Relays, Type II, with Crimped Connections - Clearance and Fixing Dimensions First
Edition
Aircraft - Electromagnetic Relays and Contactors - Part 1: General Requirements First Edition
Reference Atmospheres for Aerospace Use First Edition; Addendum 1: 1983, Addendum 2: 1983, Amendment 1: 1990
Aerospace - Fluid Systems and Components - Methods for System Sampling and Measuring the Solid Particle Contamination of
Hydraulic Fluids First Edition
Aircraft - Joints for Connecting Crew Members Regulator Masks to Oxygen Sources First Edition
Manganese Ores and Concentrates - Determination of Aluminium, Copper, Lead and Zinc Contents - Flame Atomic Absorption
Spectrometric Method First Edition
ISO
5856
ISO
5857
ISO
ISO
ISO
5858
5859
5864
ISO
ISO
ISO
5866
5867-1
5878
ISO
ISO
5884
5887
ISO
5889
ISO
ISO
5890
5892
ISO
ISO
ISO
ISO
ISO
5893
5894
5897
5898
5902
ISO
5903
Manganese Ores and Concentrates - Determination of Silicon Content - Gravimetric Method First Edition; Replaces ISO R 311: 1963
Rubber Building Gaskets - Materials for Preformed Solid Vulcanized Structural Gaskets - Specification First Edition
Rubber and Plastics Test Equipment - Tensile, Flexural and Compression Types (Constant Rate of Traverse) - Specification Third
Edition
Ships and Marine Technology - Manholes with Bolted Covers Second Edition
Passenger Cars - Rear-Window Demisting System - Test Method Second Edition
Passenger Cars - Rear-Window Defrosting System - Test Method Second Edition
Alpine Skis - Determination of the Elastic Properties First Edition
Gymnastic Equipment - Landing Mats and Surfaces for Floor Exercises - Determination of Hardness and Impact Damping First
Edition
ISO
ISO
ISO
5904
5905
5906
Gymnastic Equipment - Landing Mats and Surfaces for Floor Exercises - Determination of Resistance to Slipping First Edition
Gymnastic Equipment - Landing Mats (2 000 mm X 1 250 mm X 60 mm) First Edition
Gymnastic Equipment - Surfaces for Floor Exercises - Mats First Edition
ISO
ISO
ISO
ISO
5907
5912
5922
5923
Gymnastic Equipment - Surfaces for Floor Exercises - Boards First Edition
Camping Tents Third Edition
Malleable Cast Iron Second Edition
Fire Protection - Fire Extinguishing Media - Carbon Dioxide Second Edition; (CEN EN 25923: 1993)
ISO
5925-1
ISO
5930
ISO
5931
ISO
5938
ISO
5939
ISO
5940
ISO
5940-2
ISO
5943
ISO
ISO
ISO
5944
5945
5948
ISO
ISO
ISO
ISO
5949
5950
5951
5952
Fire tests ù Smoke-control door and shutter assemblies ù Part 1: Ambient- and medium-temperature leakage tests Second edition
Cryolite, Natural and Artificial, and Aluminium Fluoride for Industrial Use - Determination of Phosphorus Content - Reduced
Molybdophosphate Photometric Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Calcined Coke and Calcined Carbon Products - Determination of
Total Sulfur by the Eschka Method First Edition
Cryolite, Natural and artificial, and aluminium fluoride for industrial use - Determination of sulphur content - X-ray fluorescence
spectrometric method First Edition
Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Water Content - Azeotropic
Distillation (Dean and Stark) Method First Edition
Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Softening Point by the Ring-andBall Method First Edition
Carbonaceous materials used in the production of aluminium ù Pitch for electrodes ù Part 2: Determination of the softening point
(Mettler softening point method) First edition
Cheese and processed cheese products Determination of chloride content Potentiometric titration method Fourth Edition; See also
IDF 88
Milk and Milk-Based Products - Detection of Coagulase-Positive Staphylococci - Most Probable Number Technique First Edition; IDF
60
Rubber - Determination of Polyisoprene Content Second Edition
Railway Rolling Stock Material - Ultrasonic Acceptance Testing Second Edition
Tool Steels and Bearing Steels - Micrographic Method for Assessing the Distribution of Carbides Using Reference Photomicrographs
First Edition
Continuous Electrolytic Tin-Coated Cold-Reduced Carbon Steel Sheet of Commercial and Drawing Qualities Third Edition
Hot-Rolled Steel Sheet of Higher Yield Strength with Improved Formability Third Edition
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance Third Edition
ISO
ISO
ISO
ISO
ISO
5954
5956
5959
5960
5961
Cold-Reduced Carbon Steel Sheet According to Hardness Requirements Second Edition; Corrected and Reprinted 12-01-1999
Copper and Copper Alloys - Determination of Antimony Content - Rhodamine B Spectrometric Method First Edition
Copper and Copper Alloys - Determination of Bismuth Content - Diethyldithiocarbamate Spectrometric Method First Edition
Copper Alloys - Determination of Cadmium Content - Flame Atomic Absorption Spectrometric Method First Edition
Water Quality - Determination of Cadmium by Atomic Absorption Spectrometry Second Edition
ISO
ISO
ISO
ISO
5963
5964
5967
5968
ISO
ISO
ISO
ISO
ISO
ISO
ISO
5969
5970
5971
5975
5978
5979
5981
ISO
5982
ISO
5983-1
ISO
ISO
ISO
ISO
ISO
5983-2
5984 CORR 1
5984
5985 CORR 1
5985
ISO
ISO
5989
5990
ISO
ISO
5993
5996
ISO
5997
ISO
ISO
ISO
ISO
5999
6000
6002
6003
Documentation - Methods for Examining Documents, Determining Their Subjects, and Selecting Indexing Terms First Edition
Documentation - Guidelines for the Establishment and Development of Multilingual Thesauri First Edition
Taps and Thread Cutting - Nomenclature of the Main Types and Terminology First Edition
Circular Screwing Dies - Terminology First Edition
Ground Thread Taps for Pipe Threads G Series and Rp Series - Tolerances on the Threaded Portion First Edition; Corrigendum 1:
1991
Furniture - Chairs and Tables for Educational Institutions - Functional Sizes First Edition
Size Designation of Clothes - Pantyhose First Edition
Chromium Ores - Determination of Calcium and Magnesium Contents - EDTA Titrimetric Method First Edition
Rubber- or Plastics-Coated Fabrics - Determination of Blocking Resistance Second Edition; (CEN EN 25978: 1993)
Rubber or Plastics Coated Fabrics - Determination of Flexibility - Flat Loop Method First Edition
Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Combined Shear Flexing and Rubbing Second Edition
Mechanical Vibration and Shock - Range of Idealized Values to Characterize Seated-Body Biodynamic Response under Vertical
Vibration Second Edition; Supersedes ISO 7962:1987; Corrected Version:4/01/2002
Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method First
Edition; Together with ISO 5983-2 Replaces ISO 5983:1997
Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 2: Block digestion/steam
distillation method First Edition; Together with ISO 5983-1 Replaces ISO 5983:1997
Animal feeding stuffs ù Determination of crude ash TECHNICAL CORRIGENDUM 1 Second Edition
Animal feeding stuffs ù Determination of crude ash Second Edition
Animal feeding stuffs ù Determination of ash insoluble in hydrochloric acid TECHNICAL CORRIGENDUM 1 Second Edition
Animal feeding stuffs ù Determination of ash insoluble in hydrochloric acid Second Edition
Photography - Pre-Packaged Chemicals for the Processing of Silver Halide Based Photographic Materials - Vocabulary Second
Edition
Photography - Processing Chemicals - Specifications for Potassium Sulfite, 650 g/l Solution Third Edition
Sodium Hydroxide for Industrial Use - Determination of Mercury Content - Flameless Atomic Absorption Spectrometric Method First
Edition
Cast Iron Gate Valves First Edition
Chromium Ores and Concentrates - Determination of Silicon Content - Molecular Absorption Spectrometric Method and Gravimetric
Method First Edition
Polymeric Materials, Cellular Flexible - Polyurethane Foam for Load-Bearing Applications Excluding Carpet Underlay - Specification
First Edition
Round-Headed Cabbage - Storage in the Open First Edition
Bolted Bonnet Steel Gate Valves First Edition
Alpine Skis - Determination of Mass and Polar Moment of Inertia - Laboratory Measurement Method Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6004
6005
6009
6011
6012
6014
6015
Alpine Skis - Ski Binding Screws - Requirements Second Edition
Alpine Skis - Ski Binding Screws - Test Methods Second Edition
Hypodermic Needles for Single Use - Colour Coding for Identification Third Edition; (CEN EN ISO 6009: 1994)
Earth-moving machinery Visual display of machine operation Third Edition
Earth-Moving Machinery - Service Instrumentation Fourth Edition; BS 6913: Part 4: 1997
Earth-Moving Machinery - Determination of Ground Speed Second Edition
Earth-moving machinery Hydraulic excavators and backhoe loaders Methods of determining tool forces Second Edition
ISO
6016
Earth-Moving Machinery - Methods of Measuring the Masses of Whole Machines, Their Equipment and Components Second Edition
ISO
6020-1
ISO
6020-2
ISO
6020-3
ISO
ISO
6022
6025
Hydraulic fluid power ù Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series ù Part 1: Medium series Third Edition
Hydraulic Fluid Power - Mounting Dimensions for Single Rod Cylinders, 16 MPa (160 Bar) Series - Part 2: Compact Series Third
Edition
Hydraulic Fluid Power - Mounting Dimensions for Single Rod Cylinders, 16 MPa (160 Bar) Series - Part 3: Compact Series with Bores
from 250 mm to 500 mm First Edition
Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series Second Edition; Supersedes ISO 8137:
1986
Cinematography - Analogue Photographic Sound Test Films, 35 mm and 16 mm - Specifications Third Edition
ISO
6033
ISO
ISO
6035
6036
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6038
6042
6043
6044
6045
6050
6053
6054-1
6054-2
6055
6058
6059
Cinematography - Projection Reel Size 7 for 8 mm Type S Motion-Picture Film - Dimensions and Specifications First Edition
Cinematography - Viewing Conditions for the Evaluation of Films and Slides for Television - Colours, Luminances and Dimensions
First Edition
Cinematography - Colour Motion-Picture Prints and Slides for Television - Density Specifications First Edition
Cinematography - Splices for Use on 70 mm, 65 mm, 35 mm and 16 mm Motion-Picture Films - Dimensions and Locations Second
Edition
Ships and Marine Technology - Weathertight Single-Leaf Steel Doors Second Edition
Shipbuilding and Marine Structures - Eye and Fork Assemblies Under Tension Load - Main Dimensions First Edition
Shipbuilding and Marine Structures - Derrick Boom Heel Fittings - Main Dimensions First Edition
Shipbuilding and Marine Structures - Bearings for Derrick Goosenecks - Assemblies and Components First Edition
Shipbuilding - Bulbous Bow and Side Thruster Symbols First Edition
Photography - Shutter Cable Release Tip and Socket - Dimensions First Edition
Motorcycle Tyres and Rims (Code-Designated Series) - Diameter Codes 4 to 12 - Part 1: Tyres Third Edition
Motorcycle Tyres and Rims (Code-Designated Series) - Diameter Codes 4 to 12 - Part 2: Rims Second Edition
Industrial trucks Overhead guards Specification and testing Third Edition
Water Quality - Determination of Calcium Content - EDTA Titrimetric Method First Edition
Water Quality - Determination of the Sum of Calcium and Magnesium - EDTA Titrimetric Method First Edition
ISO
6060
ISO
6068
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6070
6072
6078
6079
6091
6092
6093
Water Quality - Determination of the Chemical Oxygen Demand Second Edition
Information Processing - Recording Characteristics of Instrumentation Magnetic Tape (Including Telemetry Systems) - Interchange
Requirements First Edition
Auxiliary tables for vibration generators Methods of describing equipment characteristics First Edition; Technical Corrigendum 1:
09/15/2006
Hydraulic Fluid Power - Compatibility between Fluids and Standard Elastomeric Materials Second Edition
Black Tea - Vocabulary First Edition
Instant Tea in Solid Form - Specification First Edition
Dried Milk - Determination of Titratable Acidity (Reference Method) First Edition
Dried Milk - Determination of Titratable Acidity (Routine Method) First Edition; (Erratum-1981)
Information Processing - Representation of Numerical Values in Character Strings for Information Interchange First Edition
ISO
6098
Information Processing - Self-Loading Cartridges for 12,7 mm (0.5 in) Wide Magnetic Tape Second Edition; CEN EN 26098: 1993
ISO
6099
Fluid Power Systems and Components - Cylinders - Identification Code for Mounting Dimensions and Mounting Types Third Edition
ISO
6101-1
Rubber - Determination of Metal Content by Atomic Absorption Spectrometry - Part 1: Determination of Zinc Content Second Edition
ISO
6101-2
ISO
6101-3
ISO
6101-4
Rubber - Determination of Metal Content by Atomic Absorption Spectrometry - Part 2: Determination of Lead Content Second Edition
Rubber - Determination of Metal Content by Atomic Absorption Spectrometry - Part 3: Determination of Copper Content Second
Edition
Rubber - Determination of Metal Content by Atomic Absorption Spectrometry - Part 4: Determination of Manganese Content Second
Edition
ISO
ISO
6101-5
6103
ISO
6104
ISO
6105-1
ISO
ISO
ISO
ISO
ISO
6105-2
6106
6107-1
6107-2
6107-3
Rubber Determination of metal content by atomic absorption spectrometry Part 5: Determination of iron content Second Edition
Bonded abrasive products Permissible unbalances of grinding wheels as delivered Static testing Third edition
Superabrasive products Rotating grinding tools with diamond or cubic boron nitride General survey, designation and multilingual
nomenclature Second Edition
Blanks for superabrasive cutting-off wheels Part 1: Manually guided cutting-off in building and civil engineering First Edition;
Together with ISO 6105-2 Replaces ISO 6105:1988
Blanks for superabrasive cutting-off wheels Part 2: Hand-held cutting-off in building and civil engineering First Edition; Together with
ISO 6105-1 and 6105-2 Replaces ISO 6105:1988
Abrasive products - Checking the grit size of superabrasives Second edition
Water quality Vocabulary Part 1 QualitÚ de l'eau Vocabulaire Partie 1 Fourth Edition
Water Quality - Vocabulary - Part 2 QualitÚ de l'eau Vocabulaire Partie 2 Fourth Edition
Water Quality - Vocabulary - Part 3 Second Edition; Amendment 1 - 12/15/2001
ISO
ISO
6107-4
6107-5
Water Quality - Vocabulary - Part 4 Second Edition
Water Quality - Vocabulary - Part 5 QualitÚ de l'eau Vocabulaire Partie 5 Third Edition
ISO
ISO
6107-6
6107-7
ISO
ISO
ISO
ISO
6107-8
6107-9
6108
6115
ISO
6117
ISO
6118
ISO
6119
ISO
6120
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6121
6122
6123-1
6123-2
6123-3
6127
6129
6130
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6133
6134
6138
6139
6140
6141
6142
Water Quality - Vocabulary - Part 6 QualitÚ de l'eau Vocabulaire Partie 6 Ó¸Õ±Ô¯ Ô¯ õ¹ ªÙ¯ ÔÓ-³ ÎÓ±³ 6 Third Edition
Water quality - Vocabulary - Part 7 QualitÚ de l'eau Vocabulaire Partie 7 Third Edition
Wasserbeschaffengeit - Begriffe - Teil 8 Water Quality - Vocabulary - Part 8 Qualite De L'Eau - Vocabulaire - Partie 8 First Edition;
Amendment 1 12/01/2001
Water Quality - Vocabulary - Part 9: Alphabetical List and Subject Index First Edition
Double Equal Angle Cutters with Plain Bore and Key Drive First Edition
Shipbuilding - Trawl Winches Second Edition
Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid
(service temperature 100 C max.) Second Edition
Road Vehicles - Elastomeric Cups and Seals for Hydraulic Brake Actuating Cylinders Using a Non-Petroleum Base Hydraulic Brake
Fluid (Service Temperature 70 Degrees Celsius Maximum) Second Edition
Road vehicles Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service
temperature 120 C max.) Second Edition
Road Vehicles - Brake Hose Assemblies for Hydraulic Braking Systems Used with Petroleum-Base Brake Fluid Second Edition;
Corrected and Reprinted 10/01/1997
Surface Active Agents - Technical Alkane Sulfonates - Determination of Alkane Monosulfonates Content by Direct Two-Phase
Titration Second Edition
Surface Active Agents - Technical Alkane Sulphonates - Determination of Total Alkane Sulphonates Content First Edition
Rubber or Plastics Covered Rollers - Specifications - Part 1: Requirements for Hardness First Edition
Rubber- or Plastics-Covered Rollers - Specifications - Part 2: Surface Characteristics Second Edition
Rubber- or Plastics-Covered Rollers - Specifications - Part 3: Dimensional Tolerances First Edition
Chromium Ores - Determination of Phosphorus Content - Reduced Molybdophosphate Photometric Method First Edition
Chromium Ores - Determination of Hygroscopic Moisture Content in Analytical Samples - Gravimetric Method
Chromium Ores - Determination of Total Iron Content - Titrimetric Method After Reduction First Edition
Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength Second
Edition
Rubber hoses and hose assemblies for saturated steam Specification Third Edition
Aluminium Ores - Experimental Determination of the Heterogeneity of Constitution First Edition
Aluminium Ores - Experimental Determination of the Heterogeneity of Distribution of a Lot First Edition
Aluminium Ores - Preparation of Samples First Edition
Gas Analysis - Requirements for Certificates for Calibration Gases and Gas Mixtures Third Edition
Gas Analysis - Preparation of Calibration Gas Mixtures - Gravimetric Method Second Edition
Gas Analysis - Comparison Methods for Determining and Checking the Composition of Calibration Gas Mixtures Second Edition;
Cancels and Replaces ISO 6711:1981
Gas Analysis - Preparation of Calibration Gas Mixtures - Static Volumetric Methods Second Edition
Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration Second
Edition
ISO
ISO
6143
6144
ISO
6145-1
ISO
6145-2
ISO
6145-4
ISO
6145-5
ISO
6145-6
ISO
6145-7
ISO
6145-8
ISO
6145-9
ISO
6145-10
ISO
ISO
ISO
6145-11
6147
6148
ISO
6149-1
ISO
6149-2
ISO
6149-3
ISO
6149-4
Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 8: Diffusion method First edition
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 9: Saturation Method First Edition;
Corrigendum 5/1/02
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 10: Permeation Method First
Edition
Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 11: Electrochemical generation First
Edition
Gas Analysis - Preparation of Calibration Gas Mixtures - Saturation Method First Edition
Photography - Micrographic Films, Spools and Cores - Dimensions Second Edition
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1:
Ports with truncated housing for O-ring seal Second Edition
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2:
Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends Second Edition
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3:
Dimensions, design, test methods and requirements for light-duty (L series) stud ends Second Edition
Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 4:
Dimensions, design, test methods and requirements for external hex and internal hex port plugs First Edition
ISO
6150
Pneumatic Fluid Power - Cylindrical Quick-Action Couplings for Maximum Working Pressures of 10 Bar, 16 Bar and 25 Bar (1 MPa,
1,6 MPa and 2,5 MPa) - Plug Connecting Dimensions, Specifications, Application Guidelines and Testing First Edition
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 2: Volumetric Pumps First Edition
Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 4: Continuous syringe injection method
Second Edition
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 5: Capillary Calibration Devices
First Edition
Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 6: Critical orifices Second Edition
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 7: Thermal Mass-Flow Controllers
First Edition
ISO
ISO
ISO
6152
6153
6154
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6155
6157-1
6157-2
6157-3
6158
6160
6161
ISO
6162-1 CORR 1
ISO
6162-1
ISO
6162-2
ISO
6164
ISO
ISO
ISO
ISO
ISO
ISO
6165
6166
6170
6173
6176
6177
ISO
6178
ISO
ISO
6179
6182-1
ISO
ISO
6182-2
6182-3
Thermometers for Use with Alcoholometers and Alcohol Hydrometers First Edition
Chromium Ores - Increment Sampling First Edition
Chromium Ores - Preparation of Samples First Edition
Machine Tools - Test Conditions for Horizontal Spindle Turret and Single Spindle Automatic Lathes - Testing of the Accuracy First
Edition
Fasteners - Surface Discontinuities - Part 1: Bolts, Screws and Studs for General Requirements First Edition
Fasteners - Surface Discontinuities - Part 2: Nuts First Edition
Fasteners - Surface Discontinuities - Part 3: Bolts, Screws and Studs for Special Requirements First Edition
Metallic coatings Electrodeposited coatings of chromium for engineering purposes Second Edition
Programming Languages - PL/1 First Edition; Corrected and Printed - 1981
Personal Eye-Protectors - Filters and Eye-Protectors Against Laser Radiation First Edition; (Amendment Slip-1982)
Hydraulic fluid power ù Flange connectors with split or one-piece flange clamps and metric or inch screws ù Part 1: Flange
connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 TECHNICAL CORRIGENDUM 1 First
Edition
Hydraulic fluid power ù Flange connectors with split or one-piece flange clamps and metric or inch screws ù Part 1: Flange
connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 First Edition
Hydraulic fluid power Flange connectors with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors
for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51 First Edition
Hydraulic Fluid Power - Four-Screw, One-Piece Square-Flange Connections for Use at Pressures of 25 MPa and 40 MPa (250 Bar
and 400 Bar) First Edition
Earth-moving machinery Basic types Identification and terms and definitions Engins de terrassement Principaux types Identification
et termes et dÚfinitions Fifth Edition
Securities and Related Financial Instruments - International Securities Identification Numbering System (ISIN) Sixth Edition
Spinning Machinery - Condenser Rubbers for Cards Second Edition
Open-End Spinning Machines - Vocabulary First Edition
Textile Machinery - Warp Sizing Machines - Maximum Usable Width Second Edition
Textile Machinery - Cloth Rollers - Terminology and Main Dimensions Second Edition
Centrifuges - Construction and Safety Rules - Method for the Calculation of the Tangential Stress in the Shell of a Cylindrical
Centrifuge Rotor First Edition
Rubber, Vulcanized or Thermoplastic - Rubber Sheets and Rubber- Coated Fabrics - Determination of Transmission Rate of Volatile
Liquids (Gravimetric Technique) Third Edition
Fire protection Automatic sprinkler systems Part 1: Requirements and test methods for sprinklers Second Edition
Fire protection Automatic sprinkler systems Part 2: Requirements and test methods for wet alarm valves, retard chambers and water
motor alarms Second Edition
Fire protection Automatic sprinkler systems Part 3: Requirements and test methods for dry pipe valves Second Edition
ISO
ISO
ISO
6182-4
6182-5
6182-6
ISO
6182-7
Fire Protection - Automatic Sprinkler Systems - Part 4: Requirements and Test Methods for Quick-Opening Devices First Edition
Fire Protection - Automatic Sprinkler Systems - Part 5: Requirements and Test Methods for Deluge Valves Second Edition
Fire protection Automatic sprinkler systems Part 6 Requirements and test methods for check valves First Edition
Fire protection Automatic sprinkler systems Part 7: Requirements and test methods for early suppression fast response (ESFR)
sprinklers First Edition
ISO
ISO
ISO
ISO
6182-8
6182-9
6182-10
6182-11
Fire protection
Fire protection
Fire protection
Fire protection
ISO
ISO
6183
6184-1
ISO
6184-2
ISO
ISO
ISO
6184-3
6184-4
6185-1
Fire Protection Equipment - Carbon Dioxide Extinguishing Systems for Use on Premises - Design and Installation First Edition
Explosion Protection Systems - Part 1: Determination of Explosion Indices of Combustible Dusts in Air First Edition
Explosion Protection Systems - Part 2: Determination of Explosion Indices of Combustible Gases in Air First Edition; (CEN EN 26184
Part 2: 1991)
Explosion Protection Systems - Part 3: Determination of Explosion Indices of Fuel/Air Mixtures Other Than Dust/Air and Gas/Air
Mixtures First Edition
Explosion Protection Systems - Part 4: Determination of Efficacy of Explosion Suppression Systems First Edition
Inflatable Boats - Part 1: Boats with a Maximum Motor Power Rating of 4,5 kW First Edition; Replaces ISO 6185
ISO
6185-2
Inflatable Boats - Part 2: Boats with a Maximum Motor Power Rating of 4,5 kW to 15 kW Inclusive First Edition; Replaces ISO 6185
ISO
ISO
ISO
ISO
6185-3
6186
6187
6189
Inflatable Boats - Part 3: Boats with a Maximum Motor Power Rating of 15 kW and Greater First Edition; Replaces ISO 6185
Plastics - Determination of Pourability Second Edition
Rigid Cellular Plastics - Determination of Friability First Edition
Acoustics - Pure Tone Air Conduction Threshold Audiometry for Hearing Conservation Purposes First Edition
ISO
ISO
ISO
ISO
ISO
6194-1
6194-2
6194-3
6194-4
6194-5
ISO
ISO
6195
6196-1
Rotary shaft lip-type seals incorporating elastomeric sealing elements ù Part 1: Nominal dimensions and tolerances Second Edition
Rotary Shaft Lip Type Seals - Part 2: Vocabulary First Edition
Rotary Shaft Lip Type Seals - Part 3: Storage, Handling and Installation First Edition
Rotary Shaft Lip Type Seals - Part 4: Performance Test Procedures Second Edition
Rotary Shaft Lip Type Seals - Part 5: Identification of Visual Imperfections First Edition
Fluid Power Systems and Components - Cylinders-Rod Wiper-Ring Housings in Reciprocating Applications - Dimensions and
Tolerances Second Edition
Micrographics - Vocabulary - Part 01: General Terms Second Edition
Automatic sprinkler systems Part 8: Requirements and test methods for pre-action dry alarm valves First Edition
Automatic sprinkler system Part 9: Requirements and test methods for water mist nozzles First Edition
Automatic sprinkler systems Part 10: Requirements and test methods for domestic sprinklers First Edition
Automatic sprinkler systems Part 11: Requirements and test methods for pipe hangers First Edition
ISO
ISO
6196-2
6196-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6196-4
6196-5
6196-6
6196-7
6196-8
6196-10
6198
ISO
6199
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6200
6205
6206
6207
6208
6209
6210-1
6216
6217
ISO
ISO
6218
6219
ISO
ISO
6222
6224
ISO
6225-1
ISO
6225-2
ISO
6227
ISO
6228
Micrographics - Vocabulary - Part 02: Image Positions and Methods of Recording Second Edition
Micrographics - Vocabulary - Part 03: Film Processing Second Edition
Micrographics - Vocabulary - Part 4: Materials and Packaging Micrographie - Vocabulaire - Partie 4: Supports Et Conditionnement
Second Edition
Micrographics - Vocabulary - Part 05: Quality of Images, Legibility, Inspection First Edition
Micrographics - Vocabulary - Part 06: Equipment First Edition
Micrographics - Vocabulary - Part 07: Computer Micrographics First Edition
Micrographics - Vocabulary - Part 8: Use Micrographie - Vocabulaire - Partie 8: Exploitation First Edition
Micrographics - Vocabulary - Part 10: Index First Edition; Technical Corrigendum: 11/01/2004
Micrographics - Readers for Transparent Microforms - Performance Characteristics First Edition
Micrographics - Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm - Operating procedures Second edition
Micrographics - First Generation Silver-Gelatin Microforms of Source Documents - Density Specifications and Method of
Measurement Third Edition
Inland Navigation Vessels - Customs Sealing Systems - Basic Technical Requirements First Edition
Chemical Products for Industrial Use - Sampling - Vocabulary First Edition
Seamless Nickel and Nickel Alloy Tube First Edition
Nickel and Nickel Alloy Plate, Sheet and Strip First Edition
Rubber Compounding Ingredients - Carbon Black - Determination of Solvent Extractable Material Third Edition
Cylinders for Robot Resistance Welding Guns - Part 1: General Requirements First Edition
Shipbuilding - Inland Navigation - Pilot Craft - Classification and Basic Requirements First Edition
Shipbuilding - Inland Navigation - Pilot Craft - Identification Painting and Inscriptions First Edition
Inland navigation vessels Manually operated coupling devices for push tows Safety requirements and main dimensions Second
edition
Shipbuilding - Inland Vessels - Windlasses and Anchor Capstans First Edition
Water Quality - Enumeration of Culturable Micro-Organisms - Colony Count by Inoculation in a Nutrient Agar Culture Medium Second
Edition
Thermoplastics hoses, textile-reinforced, for general-purpose water applications Specification Third Edition
Rubber, raw, natural Determination of castor oil content Part 1: Determination of castor oil glyceride content by thin-layer
chromatography Second Edition
Rubber, Raw, Natural - Determination of Castor Oil Content - Part 2: Determination of Total Ricinoleic Acid Content by Gas
Chromatography Second Edition
Chemical Products for Industrial Use - General Method for Determination of Chloride Ions - Potentiometric Method First Edition
Chemical Products for Industrial Use - General Method for Determination of Traces of Sulphur Compounds, as Sulphate, by
Reduction and Titrimetry First Edition; (Erratum-1981)
ISO
6230
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6233
6235
6237
6238
6240
6241
6242-1
6242-2
6242-3
6243
6244
6245
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6246
6247
6249
6250
6251
6255
6257
6258
6259-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6259-2
6259-3
6260
6261
6262-1
6262-2
6263
6264
6265
6266
6267
Manganese Ores - Determination of Size Distribution by Sieving First Edition
Manganese Ores and Concentrates - Determination of Calcium and Magnesium Contents - EDTA Titrimetric Method First Edition
Rubber, Raw - Determination of Block Polystyrene Content - Ozonolysis Method Second Edition
Adhesives Wood-to-wood adhesive bonds Determination of shear strength by tensile loading Second Edition
Adhesives - Wood-To-Wood Adhesive Bonds - Determination of Shear Strength by Compressive Loading Second Edition
Performance Standards in Building - Contents and Presentation First Edition; (Erratum-1981)
Performance Standards in Building - Principles for Their Preparation and Factors to Be Considered First Edition
Building Construction - Expression of Users Requirements - Part 1: Thermal Requirements First Edition
Building Construction - Expression of Users Requirements - Part 2: Air Purity Requirements First Edition
Building Construction - Expression of Users Requirements - Part 3: Acoustical Requirements First Edition
Climatic Data for Building Design - Proposed System of Symbols First Edition
Petroleum Waxes and Petrolatums - Determination of Drop Melting Point First Edition
Petroleum Products - Determination of Ash Third Edition
Petroleum Products - Gum Content of Light and Middle Distillate Fuels - Jet Evaporation Method Second Edition; Technical
Corrigendum 1: 11-15-1998
Petroleum Products - Determination of Foaming Characteristics of Lubricating Oils First Edition; Corrigendum 1: 09/15/1999
Petroleum Products - Determination of Thermal Oxidation Stability of Gas Turbine Fuels - JFTOT Method Second Edition
Petroleum Products - Determination of the Water Reaction of Aviation Fuels Second Edition
Liquefied Petroleum Gases - Corrosiveness to Copper - Copper Strip Test Second Edition
Passenger Cars - Rear-Window Washing and Wiping Systems - Test Methods Second Edition
Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Sampling Second Edition
Nuclear Power Plants - Design Against Seismic Hazards First Edition
Thermoplastics Pipes - Determination of Tensile Properties - Part 1: General Test Method First Edition
Thermoplastics Pipes - Determination of Tensile Properties - Part 2: Pipes Made of Unplasticized Poly(Vinyl Chloride) (PVC-U),
Chlorinated Poly(Vinyl Chloride) (PVC-C) and High-Impact Poly(Vinyl Chloride) (PVC-HI) First Edition
Thermoplastics Pipes - Determination of Tensile Properties - Part 3: Polyolefin Pipes First Edition
Mail Payment Orders First Edition
Boring Bars (Tool Holders with Cylindrical Shank) for Indexable Inserts - Designation Second Edition
End Mills with Indexable Inserts - Part 1: End Mills with Flatted Parallel Shank First Edition
End Mills with Indexable Inserts - Part 2: End Mills with Morse Taper Shank First Edition
Hydraulic Fluid Power - Compensated Flow-Control Valves - Mounting Surfaces Second Edition
Hydraulic Fluid Power - Pressure-Relief Valves - Mounting Surfaces Second Edition
Alpine Skis - Determination of Deformation Load and Breaking Load Second Edition
Alpine Skis - Determination of Fatigue Indexes - Cyclic Loading Test First Edition
Alpine Skis - Measurement of Bending Vibrations First Edition
ISO
6270-1
ISO
6270-2
ISO
ISO
6271-1
6271-2
ISO
6272-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6272-2
6274
6279
6280
6281
6282
6283
6284
6286
6289 CORR 1
6289
ISO
ISO
ISO
ISO
ISO
6293-1
6293-2
6296
6297
6299
ISO
6301-1
ISO
ISO
6301-2
6302
Paints and Varnishes - Determination of Resistance to Humidity - Part 1: Continuous Condensation First Edition
Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water
atmospheres First Edition
Clear liquids Estimation of colour by the platinum-cobalt scale Part 1: Visual method First Edition; Cancels and Replaces ISO
6271:1997
Clear liquids Estimation of colour by the platinum-cobalt scale Part 2: Spectrophotometric method First Edition
Paints and Varnishes - Rapid-Deformation (Impact Resistance) Tests - Part 1: Falling-Weight Test, Large-Area Indenter First Edition;
Replaces ISO 6272
Paints and Varnishes - Rapid-Deformation (Impact Resistance) Tests - Part 2: Falling-Weight Test, Small-Area Indenter First Edition;
Replaces ISO 6272
Concrete - Sieve Analysis of Aggregates First Edition
Plain Bearings - Aluminium Alloy for Solid Bearings Second Edition
Plain Bearings - Requirements on Backings for Thick-Walled Multilayer Bearings First Edition
Plain bearings ù Testing under conditions of hydrodynamic and mixed lubrication in test rigs [Replaced: ISO TR 6281]
Plain Bearings - Metallic Thin-Walled Half Bearings - Determination of the Conductivity 0,01-Limit First Edition
Refined Nickel Second Edition
Construction Drawings - Indication of Limit Deviations Second Edition
Molecular Absorption Spectrometry - Vocabulary - General - Apparatus First Edition
Skis ù Vocabulary TECHNICAL CORRIGENDUM 1 Skis ù Vocabulaire RECTIFICATIF TECHNIQUE 1 Second Edition
Skis - Vocabulary Skis - Vocabulaire Second Edition
Petroleum Products - Determination of Saponification Number - Part 1: Colour-Indicator Titration Method First Edition; Supersedes
ISO 6293: 1983
Petroleum Products - Determination of Saponification Number - Part 2: Potentiometric Titration Method First Edition
Petroleum Products - Determination of Water - Potentiometric Karl Fischer Titration Method First Edition
Petroleum Products - Aviation and Distillate Fuels - Determination of Electrical Conductivity Second Edition
Petroleum Products - Determination of Dropping Point of Lubricating Greases (Wide Temperature Range) First Edition
Pneumatic Fluid Power - Compressed Air Lubricators - Part 1: Main Characteristics to Be Included in Supplier s Literature and
Product-Marking Requirements Second Edition
Pneumatic Fluid Power - Compressed Air Lubricators - Part 2: Test Methods to Determine the Main Characteristics to be Included in
Supplier's Literature Second Edition
Earth-Moving Machinery - Drain, Fill and Level Plugs Third Edition
ISO
ISO
ISO
6303
6305-2
6305-3
Pressure Vessel Steels Not Included in ISO 2604, Parts 1 to 6 - Derivation of Long-Time Stress Rupture Properties First Edition
Railway components ù Technical delivery requirements ù Part 2: Non-alloy carbon steel baseplates Second Edition
Railway Components - Technical Delivery Requirements - Part 3: Steel Sleepers First Edition
Railway Components - Technical Delivery Requirements - Part 4: Untreated Steel Nuts and Bolts and High-Strength Nuts and Bolts
for Fish-Plate and Fastenings First Edition
Gypsum Plasterboard - Specification First Edition
ISO
ISO
6305-4
6308
ISO
ISO
ISO
6309
6310
6311
Fire protection - Safety signs Protection contre l'incendie - Signaux de securite First Edition; Corrected and Reprinted 9/10/1987
Road Vehicles - Brake Linings - Compressive Strain Test Method Second Edition
Road Vehicles - Brake Linings - Internal Shear Strength of Lining Material - Test Procedure First Edition
ISO
ISO
ISO
ISO
ISO
ISO
6312
6313
6314
6315
6316
6317
Road Vehicles - Brake Linings - Shear Test Procedure for Disc Brake Pad and Drum Brake Shoe Assemblies Second Edition
Road Vehicles - Brake Linings - Effects of Heat on Dimensions and Form of Disc Brake Pads - Test Procedure First Edition
Road Vehicles - Brake Linings - Resistance to Water, Saline Solution, Oil and Brake Fluid - Test Procedure First Edition
Road Vehicles - Brake Linings - Seizure to Ferrous Mating Surface Due to Corrosion - Test Procedure First Edition
Hot-Rolled Steel Strip of Structural Quality Third Edition
Hot-Rolled Carbon Steel Strip of Commercial and Drawing Qualities Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6320
6321
6322-1
6322-2
6322-3
6325
6326-1
ISO
ISO
6326-3
6326-5
Animal and Vegetable Fats and Oils - Determination of Refractive Index Fourth Edition; Technical Corrigendum 1: 03/15/2006
Animal and Vegetable Fats and Oils - Determination of Melting Point in Open Capillary Tubes (Slip Point) Second Edition
Storage of Cereals and Pulses - Part 1: General Recommendations for the Keeping of Cereals Second Edition
Storage of Cereals and Pulses - Part 2: Practical Recommendations Second Edition
Storage of Cereals and Pulses - Part 3: Control of Attack by Pests Second Edition
Shipbuilding - Cable Stoppers Second Edition
Natural gas ù Determination of sulfur compounds ù Part 1: General introduction Second Edition
Natural Gas - Determination of Sulfur Compounds - Part 3: Determination of Hydrogen Sulfide, Mercaptan Sulfur and Carbonyl
Sulfide Sulfur by Potentiometry First Edition
Natural Gas - Determination of Sulfur Compounds - Part 5: Lingener Combustion Method First Edition
ISO
6327
Gas Analysis - Determination of the Water Dew Point of Natural Gas - Cooled Surface Condensation Hygrometers First Edition
ISO
ISO
ISO
ISO
6328
6330
6331
6332
Photography - Photographic Materials - Determination of ISO Resolving Power Second Edition; Corrected and Reprinted 09/01/2000
Textiles - Domestic Washing and Drying Procedures for Textile Testing Second Edition
Chromium Ores and Concentrates - Determination of Chromium Content - Titrimetric Method First Edition
Water Quality - Determination of Iron - Spectrometric Method Using 1,10-Phenanthroline Second Edition
ISO
6333
ISO
6336-1
Water Quality - Determination of Manganese - Formaldoxime Spectrometric Method First Edition; (Corrected and Reprinted - 1986)
Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors Second
Edition
ISO
ISO
ISO
ISO
ISO
6336-2
6336-3
6336-5
6336-6
6340
Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) Second Edition
Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength Second Edition
Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials Second Edition
Calculation of load capacity of spur and helical gears - Part 6: Calculation of service life under variable load First Edition
Water Quality - Detection of Salmonella Species First Edition
Water Quality - Determination of the Inhibition of the Mobility of Daphnia Magna Straus (Cladocera, Crustacea) - Acute Toxicity Test
Third Edition; Technical Corrigendum 1-1998
Micrographics - Aperture Cards - Method of Measuring Thickness of Buildup Area Second Edition
ISO
ISO
6341
6342
ISO
6344-1
Coated Abrasives - Grain Size Analysis - Part 1: Grain Size Distribution Test First Edition; Corrected and Reprinted 02/01/1999
ISO
6344-2
ISO
ISO
ISO
ISO
ISO
6344-3
6345
6346
6347
6348
ISO
ISO
ISO
ISO
ISO
6351
6352
6353-1
6353-2
6353-3
Coated Abrasives - Grain Size Analysis - Part 2: Determination of Grain Size Distribution of Macrogrits P12 to P220 First Edition
Coated Abrasives - Grain Size Analysis - Part 3: Determination of Grain Size Distribution of Microgrits P240 to P2500 First Edition;
Technical Corrigendum 1: 03-01-1999
Shipbuilding and Marine Structures - Windows and Side Scuttles - Vocabulary First Edition
Freight Containers - Coding, Identification and Marking Third Edition CEN EN ISO 6346: 1995; SNZ NZS/ISO: 1984
Textile Floor Coverings - Consumer Information Second Edition
Textiles - Determination of Mass - Vocabulary First Edition
Nickel - Determination of Silver, Bismuth, Cadmium Cobalt, Copper, Iron, Manganese, Lead and Zinc Contents - Flame Atomic
Absorption Spectrometric Method First Edition
Ferronickel - Determination of Nickel Content - Dimethylglyoxime Gravimetric Method First Edition
Reagents for Chemical Analysis - Part 1: General Test Methods First Edition
Reagents for Chemical Analysis - Part 2: Specifications - First Series First Edition; Addendum 2: 1986
Reagents for Chemical Analysis - Part 3: Specifications - Second Series First Edition
ISO
ISO
ISO
6356
6357
6358
ISO
ISO
ISO
ISO
6360-1 CORR 1
6360-1
6360-2
6360-3
ISO
6360-4
Textile Floor Coverings - Assessment of Static Electrical Propensity - Walking Test First Edition; Replaces ISO TR 6356: 1982
Documentation - Spine Titles on Books and Other Publications First Edition
Pneumatic Fluid Power - Components Using Compressible Fluids - Determination of Flow-Rate Characteristics First Edition
Dentistry ù Number coding system for rotary instruments ù Part 1: General characteristics, TECHNICAL CORRIGENDUM 1 Second
Edition
Dentistry Number coding system for rotary instruments Part 1: General characteristics Second Edition
Dentistry Number coding system for rotary instruments Part 2: Shapes Second Edition
Dentistry Number coding system for rotary instruments Part 3: Specific characteristics of burs and cutters First Edition
Dentistry Number coding system for rotary instruments Part 4: Specific characteristics of diamond instruments First Edition
ISO
6360-6
Dentistry Number coding system for rotary instruments Part 6: Specific characteristics of abrasive instruments First Edition
Dentistry Number coding system for rotary instruments Part 7: Specific characteristics of mandrels and special instruments First
Edition
Wrought Aluminium and Aluminium Alloys Sheets, Strips and Plates - Part 1: Technical Conditions for Inspection and Delivery First
Edition;
Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates - Part 2: Mechanical Properties Second Edition;
Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates - Part 3: Strips - Tolerances on Shape and Dimensions First
Edition
Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates - Part 4: Sheets and Plates - Tolerances on Shape and
Dimensions First Edition;
Wrought Aluminium and Aluminium Alloys Extruded Rods/Bars, Tubes and Profiles - Part 1: Technical Conditions for Inspection and
Delivery First Edition;
ISO
6360-7
ISO
ISO
6361-1
6361-2
ISO
6361-3
ISO
6361-4
ISO
6362-1
ISO
6362-2
ISO
6362-3
ISO
6362-4
ISO
6362-5
ISO
ISO
6363-1
6363-2
ISO
6363-4
ISO
6363-5
Wrought Aluminium and Aluminium Alloy Extruded Rods/Bars, Tubes and Profiles - Part 2: Mechanical Properties Second Edition
Wrought Aluminium and Aluminium Alloy Extruded Rods/Bars, Tubes and Profiles - Part 3: Extruded Rectangular Bars - Tolerances
on Shape and Dimensions Second Edition
Wrought Aluminium and Aluminium Alloy Extruded Rods/Bars, Tubes and Profiles - Part 4: Extruded Profiles - Tolerances on Shape
and Dimensions First Edition
Wrought Aluminium and Aluminium Alloy Extruded Rods/Bars, Tubes and Profiles - Part 5: Extruded Round, Square and Hexagonal
Bars - Tolerances on Shape and Dimensions Second Edition
Wrought Aluminium and Aluminium Alloy Cold-Drawn Rods/Bars and Tubes - Part 1: Technical Conditions for Inspection and
Delivery First Edition;
Wrought Aluminium and Aluminium Alloy Cold-Drawn Rods/Bars and Tubes - Part 2: Mechanical Properties First Edition;
Wrought Aluminium and Aluminium Alloy Cold-Drawn Rods/Bars and Tubes - Part 4: Drawn Rectangular Bars - Tolerances on Form
and Dimensions First Edition
Wrought Aluminium and Aluminium Alloy Cold-Drawn Rods/Bars and Tubes - Part 5: Drawn Square and Hexagonal Bars Tolerances on Form and Dimensions First Edition
ISO
6365-1
Wrought Aluminium and Aluminium Alloy Cold-Drawn Wire - Part 1: Technical Conditions for Inspection and Delivery First Edition;
ISO
6370-1
ISO
ISO
ISO
6370-2
6372-1
6372-2
Vitreous and Porcelain Enamels - Determination of the Resistance to Abrasion - Part 1: Abrasion Testing Apparatus First Edition
Vitreous and Porcelain Enamels - Determination of the Resistance to Abrasion - Part 2: Loss in Mass After Sub-Surface Abrasion
First Edition
Nickel and Nickel Alloys - Terms and Definitions - Part 1: Materials First Edition
Nickel and Nickel Alloys - Terms and Definitions - Part 2: Refinery Products First Edition
ISO
6372-3
ISO
ISO
6374
6375
ISO
ISO
ISO
ISO
ISO
ISO
6376
6382
6383-1
6383-2
6384
6385
ISO
ISO
ISO
ISO
6387
6388
6392-1
6392-2
ISO
6393
ISO
6394
ISO
6395
ISO
6396
ISO
6401
ISO
6402-1
ISO
ISO
ISO
6402-2
6403
6405-1
Nickel and Nickel Alloys - Terms and Definitions - Part 3: Wrought Products and Castings First Edition
Cryolite, Natural and Artificial, and Aluminium Fluoride for Industrial Use - Determination of Phosphorus Content - Atomic Absorption
Spectrometric Method After Extraction First Edition
Carbonaceous Materials for the Production of Aluminium - Cokes for Electrodes - Sampling First Edition
Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Content of Toluene-Insoluble
Material First Edition
General Method for Determination of Silicon Content - Reduced Molybdosilicate Spectrophotometric Method First Edition
Plastics - Film and Sheeting - Determination of Tear Resistance - Part 1: Trouser Tear Method First Edition
Plastics - Film and Sheeting - Determination of Tear Resistance - Part 2: Elmendorf Method First Edition
Surface Active Agents - Technical Ethoxylated Fatty Amines - Methods of Analysis First Edition
Ergonomic principles in the design of work systems Second Edition
Surface Active Agents - Determination of the Power to Disperse Calcium Soap - Acidimetric Method (Modified Schonfeldt Method)
First Edition
Surface Active Agents - Determination of Flow Properties Using a Rotational Viscometer Second Edition
Earth Moving Machinery - Lubrication Fittings - Part 1: Nipple Type First Edition; Supersedes ISO 6392: 1980
Earth-Moving Machinery - Lubrication Fittings - Part 2: Grease-Gun Nozzles First Edition; Replaced by ISO 6392
Acoustics - Measurement of Exterior Noise Emitted by Earth-Moving Machinery - Stationary Test Conditions Second Edition
Acoustics - Measurement at the Operator s Position of Noise Emitted by Earth-Moving Machinery - Stationary Test Conditions
Second Edition
Acoustics - Measurement of Exterior Noise Emitted by Earth-Moving Machinery - Dynamic Test Conditions First Edition; SAE J 2104;
Amendment 1 12-15-1996
Acoustics - Measurement at the Operator s Position of Noise Emitted by Earth-Moving Machinery - Dynamic Test Conditions First
Edition
Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Determination of Residual Vinyl Chloride Monomer - Gas
Chromatographic Method First Edition
Plastics - Acrylonitrile-Styrene-Acrylate (ASA), Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for
Specifications Fourth Edition
Plastics Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated
polyethylene)-styrene (ACS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
Second Edition
Hydraulic Fluid Power - Valves Controlling Flow and Pressure - Test Methods First Edition; (Corrected and Reprinted - 1989)
Earth-Moving Machinery - Symbols for Operator Controls and Other Displays - Part 1: Common Symbols Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
6405-2
6406
6410-1
6410-2
6410-3
6411
ISO
6412-1
ISO
6412-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6412-3
6413
6414
6415
6416
6420
6422
6425
6426-1
ISO
6426-2 CORR 1
ISO
ISO
ISO
6426-2
6428
6429
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6432
6433
6437
6438
6439
6442
6443
Earth-moving machinery Symbols for operator controls and other displays Part 2: Specific symbols for machines, equipment and
accessories AMENDMENT 2: Additional symbols First Edition; Amendment 1: 8/15/1997; Amendment 2: 12/1/2004
Gas cylinders Seamless steel gas cylinders Periodic inspection and testing Second edition
Technical Drawings - Screw Threads and Threaded Parts - Part 1: General Conventions First Edition
Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread Inserts First Edition
Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified Representation First Edition
Technical Drawings - Simplified Representation of Centre Holes First Edition
Technical Drawings - Simplified Representation of Pipelines - Part 1: General Rules and Orthogonal Representation First Edition;
(CEN EN ISO 6412-1: 1994)
Technical Drawings - Simplified Representation of Pipelines - Part 2: Isometric Projection First Edition; (CEN EN ISO 6412-2: 1994)
Technical Drawings - Simplified Representation of Pipelines - Part 3: Terminal Features of Ventilation and Drainage Systems First
Edition; (CEN EN ISO 6412-3: 1996)
Technical Drawings - Representation of Splines and Serrations First Edition; (CEN EN ISO 6413: 1994)
Technical Drawings for Glassware First Edition
Internal combustion engines - Spin-on filters for lubricating oil - Dimensions Third edition
Hydrometry Measurement of discharge by the ultrasonic (acoustic) method Third Edition
Liquid Flow Measurement in Open Channels - Position Fixing Equipment for Hydrometric Boats First Edition
Layout Key for Trade Documents First Edition
Divers Watches Third Edition
Horological Vocabulary - Part 1: Technical and Scientific Definitions First Edition
Horological vocabulary ù Part 2: Technical and commercial definitions Vocabulaire horloger ù Partie 2: DÚfinitions technicocommerciales Second Edition
Horological vocabulary ù Part 2: Technical and commercial definitions Vocabulaire horloger ù Partie 2: DÚfinitions technicocommerciales Second Edition
Technical Drawings - Requirements for Microcopying First Edition
Information Technology - Control Functions for Coded Character Sets Third Edition
Pneumatic Fluid Power - Single Rod Cylinders - 10 Bar (1 000 kPa) Series - Bores from 8 to 25 mm - Mounting Dimensions First
Edition
Technical Drawings - Item References First Edition; (CEN EN ISO 6433: 1994)
Copper Alloys - Determination of Chromium Content - Titrimetric Method First Edition
Documentation - African Coded Character Set for Bibliographic Information Interchange First Edition
Water Quality - Determination of Phenol Index - 4-Aminoantipyrine Spectrometric Methods After Distillation Second Edition
Door leaves - General and local flatness - Measurement method Second Edition
Door leaves Method for measurement of height, width, thickness and squareness Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6444
6445
6446
6447
6448
6450
6451
ISO
ISO
ISO
6452
6453
6454
ISO
6455
ISO
6460-1
ISO
6461-1
ISO
ISO
6461-2
6462
ISO
ISO
6463
6465
ISO
ISO
6466
6467
ISO
ISO
6468
6469-1
ISO
6469-2
ISO
ISO
ISO
6469-3
6472
6474
Door leaves - Determination of the behaviour under humidity variations in successive uniform climates Second Edition
Doors - Behaviour between two different climates - Test method Second Edition
Rubber Products - Bridge Bearings - Specification for Rubber Materials First Edition
Rubber Seals - Joint Rings Used for Gas Supply Pipes and Fittings - Specification for Material First Edition
Rubber Seals - Joint Rings Used for Petroleum Product Supply Pipes and Fittings - Specification for Material First Edition
Rubber- or plastics-coated fabrics Determination of resistance to liquids First Edition
Plastics Coated Fabrics - Polyvinyl Chloride Coatings - Rapid Method for Checking Fusion First Edition
Rubber- or Plastics-Coated Fabrics - Determination of Fogging Characteristics of Trim Materials in the Interior of Automobiles
Second Edition
Polymeric Materials, Cellular Flexible - Polyvinylchloride Foam Sheeting - Specification First Edition
Shipbuilding - Strum Boxes First Edition
Unplasticized Polyvinyl Chloride (PVC) Fittings with Elastic Sealing Ring Type Joints for Pipes Under Pressure - Dimensions of
Laying Lengths - Metric Series First Edition
Motorcycles ù Measurement method for gaseous exhaust emissions and fuel consumption ù Part 1: General test requirements First
Edition [Cancelled: ISO 6460]
Water Quality - Detection and Enumeration of the Spores of Sulfite-Reducing Anaerobes (Clostridia) - Part 1: Method by Enrichment
in a Liquid Medium First Edition; (CEN EN 26461-1: 1993)
Water Quality - Detection and Enumeration of the Spores of Sulfite-Reducing Anaerobes (Clostridia) - Part 2: Method by Membrane
Filtration First Edition; (CEN EN 26461-2: 1993)
Face Milling Cutters with Indexable Inserts - Dimensions First Edition; (ANSI 6462-1983)
Animal and Vegetable Fats and Oils - Determination of Butylhydroxyanisole (BHA) and Butylhydroxytoluene (BHT) - Gas-Liquid
Chromatographic Method First Edition
Whole Cumin (Cuminum Cyminum Linnaeus) - Specification First Edition
Tobacco and Tobacco Products - Determination of Dithiocarbamate Pesticides Residues - Molecular Absorption Spectrometric
Method First Edition
Ferrovanadium - Determination of Vanadium Content - Potentiometric Method First Edition
Water Quality - Determination of Certain Organochlorine Insecticides, Polychlorinated Biphenyls and Chlorobenzenes - Gas
Chromatographic Method After Liquid-Liquid Extraction First Edition
Electric Road Vehicles - Safety Specifications - Part 1 On-Board Electrical Energy Storage First Edition
Electric Road Vehicles - Safety Specifications - Part 2: Functional Safety Means and Protection Against Failures First Edition
Electric road vehicles Safety specifications Part 3: Protection of persons against electric hazards First Edition; Corrigendum 1:
04/15/2003
Rubber Compounding Ingredients - Abbreviations Third Edition
Implants for Surgery - Ceramic Materials Based on High Purity Alumina Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6475
6477
6478
6479
6480
6481
6482
6483
6484
6485
ISO
6486-1
ISO
ISO
ISO
6486-2
6487
6488
ISO
6489-1
ISO
ISO
6489-2
6489-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6489-4
6490-1
6491
6492
6493
6495
6496
6497
6498
6501
6502
6503
Implants for Surgery - Metal Bone Screws with Asymmetrical Thread and Spherical Under-Surface - Mechanical Requirements and
Test Methods First Edition
Cashew Kernels - Specification First Edition
Peanuts - Specification First Edition
Shelled Sweet Kernels of Apricots - Specification First Edition; Technical Corrigendum 1: 12/15/1999
Conditions of Acceptance for Horizontal Internal Broaching Machines - Testing of the Accuracy Second Edition
Acceptance Conditions for Vertical Surface Type Broaching Machines - Testing of Accuracy First Edition
Shipbuilding - Deck Machinery - Warping End Profiles First Edition
Earth-Moving Machinery - Dumper Bodies - Volumetric Rating First Edition
Earth-Moving Machinery - Elevating Scrapers - Volumetric Ratings Second Edition
Earth-Moving Machinery - Tractor-Scraper Volumetric Rating First Edition
Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 1: Test
Method Second Edition
Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 2:
Permissible Limits Second Edition
Road Vehicles - Measurement Techniques in Impact Tests - Instrumentation Fourth Edition
Tobacco - Determination of Water Content - Karl Fischer Method Second Edition;
Agricultural Vehicles - Mechanical Connections between Towed and Towing Vehicles - Part 1: Dimensions of Hitch-Hooks Third
Edition
Agricultural Vehicles - Mechanical Connections between Towed and Towing Vehicles - Part 2: Specification for Clevis Coupling 40
Second Edition
Agricultural vehicles Mechanical connections between towed and towing vehicles Part 3: Tractor drawbar Second Edition
Agricultural vehicles Mechanical connections between towed and towing vehicles Part 4: Dimensions of piton-type coupling First
Edition
Animal Feeding Stuffs - Determination of Calcium Content - Part 1: Titrimetric Method First Edition
Animal Feeding Stuffs - Determination of Phosphorus Content - Spectrophotometric Method Second Edition
Animal Feeding Stuffs - Determination of Fat Content First Edition
Animal Feeding Stuffs - Determination of Starch Content - Polarimetric Method First Edition
Animal Feeding Stuffs - Determination of Water-Soluble Chlorides Content Second Edition
Animal Feeding Stuffs - Determination of Moisture and Other Volatile Matter Content Second Edition
Animal feeding stuffs Sampling First Edition
Animal Feeding Stuffs - Preparation of Test Samples Second Edition
Ferronickel - Specification and Delivery Requirements First Edition
Rubber - Guide to the Use of Curemeters Third Edition
Paints and Varnishes - Determination of Total Lead - Flame Atomic Absorption Spectrometric Method First Edition
ISO
6504-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6504-3
6505
6506-1
6506-2
6506-3
6506-4
6507-1
6507-2
6507-3
ISO
ISO
6507-4
6508-1
ISO
6508-2
ISO
ISO
ISO
ISO
6508-3
6509
6511
6512
ISO
ISO
ISO
6513
6514
6516
ISO
6517
ISO
6518-1
ISO
ISO
6518-2
6519
Paints and Varnishes - Determination of Hiding Power - Part 1: Kubelka-Munk Method for White and Light Coloured Paints First
Edition
Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of lightcoloured paints at a fixed
spreading rate Second Edition
Rubber, Vulcanized or Thermoplastic - Determination of Tendency to Adhere to and to Corrode Metals Third edition
Metallic materials - Brinell hardness test - Part 1: Test method Second edition
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines Second edition
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks Second edition
Metallic materials Brinell hardness test Part 4: Table of hardness values First edition; Partly Replaces ISO 6506-1:1999
Metallic materials Vickers hardness test Part 1: Test method Third Edition
Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines Third Edition
Metallic materials Vickers hardness test Part 3: Calibration of reference blocks Third Edition
Metallic materials Vickers hardness test Part 4: Tables of hardness values First Edition; Cancels and Replaces ISO 6507-1: 1997
Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) Second Edition
Metallic materials Rockwell hardness test Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N,
T) Second Edition
Metallic materials Rockwell hardness test Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) Second
Edition
Corrosion of Metals and Alloys - Determination of Dezincification Resistance of Brass First Edition
Building Construction - Modular Coordination - Modular Floor Plane for Vertical Dimensions First Edition; (PNS 642: 1988)
Building Construction - Modular Coordination - Storey Heights and Room Heights First Edition
Building Construction - Modular Coordination - Series of Preferred Multimodular Sizes for Horizontal Dimensions First Edition; (PNS
640: 1988)
Building Construction - Modular Coordination - Sub-Modular Increments First Edition; (PNS 643: 1988)
Photography - Photographic Lenses - Distance Scale Markings First Edition
Air Cargo Equipment - Base-Restrained Certified Containers Exclusively for the Lower Deck of High-Capacity Aircraft Second Edition
Road Vehicles - Ignition Systems - Part 1: Vocabulary Vehicules Routiers - Systemes D allumage - Partie 1: Vocabulaire Third
Edition
Road Vehicles - Ignition Systems - Part 2: Electrical Performance and Function Test Methods Second Edition; Corrigendum 1
02/15/1997
Diesel engines Fuel injection pumps Tapers for shaft ends and hubs Third Edition
ISO
6520-1
ISO
ISO
6520-2
6522
ISO
6523-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6523-2
6524
6525
6526
6527
6528-1
6528-2
6528-3
ISO
6529
ISO
6530
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6531
6532
6533
6534
6535
6536
6537
ISO
6538
ISO
ISO
6539
6540
Schwei en und verwandte Prozesse ù Einteilung von geometrischen Unregelmõ igkeiten an metallischen Werkstoffen ù Teil 1:
Schmelzschwei en Welding and allied processes ù Classification of geometric imperfections in metallic materials ù Part 1: Fusion
welding Soudage et techniques connexes ù Classification des dÚfauts gÚomÚtriques dans les soudures des matÚriaux mÚtalliques
ù Partie 1: Soudage par fusion Second Edition
Welding and Allied Processes - Classification of Geometric Imperfections in Metallic Materials - Part 2: Welding with Pressure First
Edition
Information Technology - Programming Languages - PL/I General Purpose Subset Second Edition
Information Technology - Structure for the Identification of Organizations and Organization Parts - Part 1: Identification of
Organization Identification Schemes First Edition
Information Technology - Structure for the Identification of Organizations and Organization Parts - Part 2: Registration of Organization
Identification Schemes First Edition
Plain Bearings - Thin-Walled Half-Bearings - Checking of Peripheral Length Second Edition
Plain Bearings - Ring Type Thrust Washers Made from Strip - Dimensions and Tolerances First Edition
Plain Bearings - Pressed Bimetallic Half Thrust Washers - Features and Tolerances First Edition
Nuclear Power Plants - Reliability Data Exchange - General Guidelines First Edition
Rubber - Determination of Total Sulfur Content - Part 1: Oxygen Combustion Flask Method Second Edition
Rubber - Determination of Total Sulfur Content - Part 2: Sodium Peroxide Fusion Method Second Edition
Rubber - Determination of Total Sulfur Content - Part 3: Furnace Combustion Method First Edition
Protective Clothing - Protection Against Chemicals - Determination of Resistance of Protective Clothing Materials to Permeation by
Liquids and Gases Second Edition
Protective clothing Protection against liquid chemicals Test method for resistance of materials to penetration by liquids Third Edition
Machinery for Forestry - Portable Hand-Held Chain-Saws - Vocabulary Materiel Forestier - Scies A Chaine Portatives - Vocabulaire
Second Edition
Portable Chain Saws - Technical Data Second Edition; (Corrected and Reprinted - 1994)
Forestry Machinery - Portable Chain-Saw Front Hand-Guard - Dimensions and Clearances Third Edition
Forestry machinery ù Portable chain-saw hand-guards ù Mechanical strength third Edition
Portable chain-saws Chain brake performance Second Edition; Technical Corrigendum 1: 9/1/2004
Bank Operations - Standard Scheme for Drawing Lists First Edition; (Erratum-1982)
Pneumatic Fluid Power Systems - Cylinder Barrels - Requirements for Non-Ferrous Metallic Tubes First Edition
Cassia, Chinese Type, Indonesian Type and Vietnamese Type [Cinnamomum Aromaticum (Nees) Syn. Cinnamomum Cassia (Nees)
ex Blume, Cinnamomum Burmanii (C.G.Nees) Blume and Cinnmomum Loureirii Nees] - Specification Second Edition
Cinnamon, Sri Lankan Type, Seychelles Type and Madagascan Type (Cinnamomum Zeylanicum Blume) - Specification Second
Edition
Maize - Determination of Moisture Content (on Milled Grains and on Whole Grains) First Edition
ISO
6541
ISO
ISO
ISO
6544
6545
6546
ISO
ISO
6547
6549
ISO
6550-1
ISO
6550-2
ISO
6550-3
ISO
6550-4
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6551
6552
6553
6554
6555
6556
6557-1
ISO
ISO
6557-2
6558-2
ISO
6560
ISO
6561-1
ISO
ISO
6561-2
6564
ISO
6565
Agricultural Food Products - Determination of Crude Fibre Content - Modified Scharrer Method First Edition
Hand-Held Pneumatic Assembly Tools for Installing Threaded Fasteners - Reaction Torque and Torque Impulse Measurements First
Edition
Acceptance Conditions for Gear Hobbing Machines - Testing of the Accuracy First Edition
Road vehicles Collection of accident data for evaluation of occupant restraint performance First Edition
Hydraulic Fluid Power - Cylinders - Piston Seal Housings Incorporating Bearing Rings - Dimensions and Tolerances First Edition
Road Vehicles - Procedure for H- and R-Point Determination Second Edition
Road Vehicles - Sheath-Type Glow-Plugs with Conical Seating and Their Cylinder Head Housing - Part 1: M14 X 1,25 Glow-Plugs
First Edition;
Road Vehicles - Sheath-Type Glow Plugs with Conical Seating and Their Cylinder Head Housing - Part 2: M12 X 1,25 Glow-Plugs
First Edition;
Road Vehicles - Sheath-Type Glow-Plugs with Conical Seating and Their Cylinder Head Housing - Part 3: M10 Glow-Plugs Second
Edition
Road Vehicles - Sheath-Type glow-plugs with conical seating and their cylinder head housing - Part 4: M8 x 1 glow-plugs First edition
Petroleum Liquids and Gases - Fidelity and Security of Dynamic Measurement - Cabled Transmission of Electric and/or Electronic
Pulsed Data First Edition; (NZS/ISO 6551: 1982) (CEN EN ISO 6551: 1995)
Automatic Steam Traps - Definition of Technical Terms First Edition
Automatic Steam Traps - Marking First Edition
Flanged Automatic Steam Traps - Face-to-Face Dimensions First Edition
Shipbuilding - Topping Winches Second Edition
Laboratory Glassware - Filter Flasks First Edition
Fruits, Vegetables and Derived Products - Determination of Ascorbic Acid - Part 1: Reference Method First Edition
Fruits, Vegetables and Derived Products - Determination of Ascorbic Acid Content - Part 2: Routine Methods First Edition;
(Withdrawn) First Edition
Fruits, Vegetables and Derived Products - Determination of Carotene Content - Part 2: Routine Methods First Edition
Fruit and Vegetable Products - Determination of Benzoic Acid Content (Benzoic Acid Contents Greater Than 200 mg per Litre or per
Kilogram) - Molecular Absorption Spectrometric Method First Edition
Fruits, vegetables and derived products Determination of cadmium content Part 1: Method using graphite furnace atomic absorption
spectrometry First Edition; Together with ISO 6561-2:2005 Replaces ISO 6561: 1983
Fruits, vegetables and derived products Determination of cadmium content Part 2: Method using flame atomic absorption
spectrometry First Edition; Together with ISO 6561-1: 2005 Replaces ISO 6561: 1983
Sensory Analysis - Methodology - Flavour Profile Methods First Edition
Tobacco and Tobacco Products - Draw Resistance of Cigarettes and Pressure Drop of Filter Rods - Standard Conditions and
Measurement Third Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6570
6571
6574
6575
6576
6577
6578
ISO
ISO
ISO
ISO
6579 AMD 1
6579 CORR 1
6579
6580
ISO
ISO
ISO
ISO
ISO
6581
6582
6584
6586
6587
ISO
6588-1
ISO
ISO
ISO
6588-2
6589
6590-1
ISO
6590-2
ISO
6591-1
ISO
ISO
ISO
6591-2
6592
6594
ISO
6596-1
Natural Gas - Determination of Potential Hydrocarbon Liquid Content - Gravimetric Methods First Edition; Cancels and Replaces ISO
6570-1:1993 and ISO 6570-2:1984
Spices, Condiments and Herbs - Determination of Volatile Oil Content First Edition
Celery Seed (Apium Graveolens Linnaeus) - Specification First Edition
Fenugreek, Whole or Ground (Powdered) - Specification First Edition
Laurel (Laurus nobilis L.) Whole and ground leaves Specification Second Edition
Nutmeg, Whole or Broken, and Mace, Whole or in Pieces (Myristica Fragrans Houttuyn) - Specification Second Edition
Refrigerated Hydrocarbon Liquids - Static Measurement - Calculation Procedure First Edition
Microbiology of food and animal feeding stuffs ù Horizontal method for the detection of Salmonella spp. AMENDMENT 1: Annex D:
Detection of Salmonella spp. in animal faeces and in environmental samples from the primary production stage Fourth Edition
Microbiology of food and animal feeding stuffs ù Horizontal method for the detection of Salmonella spp. Fourth Edition
Microbiology of food and animal feeding stuffs ù Horizontal method for the detection of Salmonella spp. Fourth Edition
General-purpose industrial fans Circular flanges Dimensions Second edition
Anodizing of Aluminium and Its Alloys - Determination of the Fastness to Ultra-Violet Light of Coloured Anodic Oxide Coatings First
Edition
Shipbuilding - Numerical Control of Machines - ESSI Format First Edition
Cleaning Equipment for Air and Other Gases - Classification of Dust Separators First Edition
Data Processing - Implementation of the ISO 7-Bit and 8-Bit Coded Character Sets on Punched Cards First Edition
Paper, Board and Pulps - Determination of Conductivity of Aqueous Extracts Second Edition
Paper, board and pulps - Determination of pH of aqueous extracts - Part 1: Cold extraction First edition; Together with ISO 6588-2
cancels and replaces ISO 6588:1981
Paper, board and pulps Determination of pH of aqueous extracts Part 2: Hot extraction First edition; Together with ISO 6588-1
cancels and replaces ISO 6588:1981
Joints in Building - Laboratory Method of Test for Air Permeability of Joints Second Edition
Packaging - Sacks - Vocabulary and Types - Part 1: Paper Sacks First Edition; (CEN EN 26590-1: 1992)
Packaging - Sacks - Vocabulary and Types - Part 2: Sacks Made from Thermoplastic Flexible Film First Edition; (CEN EN 26590-2:
1992)
Packaging - Sacks - Description and Method of Measurement - Part 1: Empty Paper Sacks First Edition; (CEN EN 26591-1: 1992)
Packaging - Sacks - Description and Method of Measurement - Part 2: Empty Sacks Made from Thermoplastic Flexible Film First
Edition; (CEN EN 26591-2: 1992)
Information Technology - Guidelines for the Documentation of Computer-Based Application Systems First Edition
Cast iron drainage pipes and fittings Spigot series Second Edition
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Two-Frequency Recording at 7 958
ftprad, 1,9 tpmm (48 tpi), on One Side - Part 1: Dimensional, Physical and Magnetic Characteristics Second Edition
ISO
6596-2
ISO
ISO
ISO
ISO
6597
6598
6599-1
6601
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Two-Frequency Recording at 7 958
ftprad, 1,9 tpmm (48 tpi), on One Side - Part 2: Track Format First Edition
Road vehicles - Hydraulic braking systems, including those with electronic control functions, for motor vehicles - Test procedures
Fourth Edition
Fertilizers - Determination of Phosphorus Content - Quinoline Phosphomolybdate Gravimetric Method First Edition
Packaging - Sacks - Conditioning for Testing - Part 1: Paper Sacks First Edition; (CEN EN 26599-1: 1992)
Plastics Friction and wear by slidingIdentification of test parameters Second edition
ISO
6603-1
Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 1: Non-Instrumented Impact Testing Second Edition
ISO
ISO
ISO
6603-2
6605
6606
Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 2: Instrumented Impact Testing Second Edition
Hydraulic fluid power Hoses and hose assemblies Test methods Second Edition
Aluminium Ores - Determination of Loss of Mass at 1 075 Degrees C - Gravimetric Method First Edition
ISO
ISO
6607
6609
ISO
ISO
ISO
ISO
ISO
6611
6612
6613
6614
6615
ISO
6617
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6618
6619
6621-1
6621-2
6621-3
6621-4
6621-5
6622-1
6623
6624-1
Aluminium Ores - Determination of Total Silicon Content - Combined Gravimetric and Spectrophotometric Method First Edition
Aluminium Ores - Determination of Iron Content - Titrimetric Method First Edition
Milk and Milk Products - Enumeration of Colony-Forming Units of Yeasts and/or Moulds - Colony-Count Technique at 25 Degrees C
Second Edition; IDF 94
Windows and Door Height Windows - Wind Resistance Tests First Edition
Windows and Door Height Windows - Air Permeability Test First Edition
Petroleum Products - Determination of Water Separability of Petroleum Oils and Synthetic Fluids Second Edition
Petroleum Products - Determination of Carbon Residue - Conradson Method Second Edition
Petroleum-Based Lubricating Oils - Ageing Characteristics - Determination of Change in Conradson Carbon Residue After Oxidation
First Edition
Petroleum Products and Lubricants -Determination of Acid or Base Number - Colour-Indicator Titration Method Second Edition
Petroleum Products and Lubricants - Neutralization Number - Potentiometric Titration Method First Edition
Internal Combustion Engines - Piston Rings - Part 1: Vocabulary First Edition
Internal combustion engines Piston rings Part 2: Inspection measuring principles Second Edition
Internal Combustion Engines - Piston Rings - Part 3: Material Specifications Second Edition
Internal combustion engines Piston rings Part 4: General specifications Second Edition
Internal combustion engines - Piston rings - Part 5: Quality requirements Second Edition
Internal combustion engines Piston rings Part 1: Rectangular rings made of cast iron Second Edition
Internal combustion engines Piston rings Scraper rings made of cast iron Second Edition
Internal Combustion Engines - Piston Rings - Part 1: Keystone Rings Made of Cast Iron Second Edition
ISO
ISO
ISO
ISO
ISO
6624-2
6624-3
6624-4
6625
6626
ISO
ISO
ISO
ISO
6626-2
6629
6630
6632
ISO
6633
ISO
6634
ISO
ISO
6635
6636-1
ISO
ISO
6636-2
6636-3
ISO
ISO
6637
6638-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6638-2
6639-1
6639-2
6639-3
6639-4
6644
6646
6647-1
6647-2
ISO
6651
Internal combustion engines Piston rings Part 2: Half keystone rings made of cast iron First Edition; Replaces ISO TR 6624-2:1988
Internal Combustion Engines - Piston Rings - Part 3: Keystone Rings Made of Steel First Edition
Internal combustion engines Piston rings Part 4: Half keystone rings made of steel First Edition
Internal Combustion Engines - Piston Rings - Oil Control Rings First Edition
Internal Combustion Engines - Piston Rings - Coil-Spring-Loaded Oil Control Rings First Edition
Internal Combustion Engines - Piston Rings - Part 2: Coil-Spring-Loaded Oil Control Rings of Narrow Width Made of Cast Iron First
Edition
Chromium Ores and Concentrates - Methods of Chemical Analysis - General Instructions First Edition
Documentation - Bibliographic Control Characters First Edition
Fruits, Vegetables and Derived Products - Determination of Volatile Acidity First Edition
Fruits, Vegetables and Derived Products - Determination of Lead Content - Flameless Atomic Absorption Spectrometric Method First
Edition; (PNS 586: 1992)
Fruits, Vegetables and Derived Products - Determination of Arsenic Content - Silver Diethyldithiocarbamate Spectrophotometric
Method First Edition; (PNS 587: 1992)
Fruits, Vegetables and Derived Products - Determination of Nitrite and Nitrate Content - Molecular Absorption Spectrometric Method
First Edition
Fruits, Vegetables and Derived Products - Determination of Zinc Content - Part 1: Polarographic Method First Edition
Fruits, Vegetables and Derived Products - Determination of Zinc Content - Part 2: Atomic Absorption Spectrometric Method First
Edition; (PNS 588: 1992)
Fruit and Vegetable Products - Determination of Zinc Content - Part 3: Dithizone Spectrometric Method First Edition
Fruits, Vegetables and Derived Products - Determination of Mercury Content - Flameless Atomic Absorption Method First Edition
Fruit and Vegetable Products - Determination of Formic Acid Content - Part 1: Gravimetric Method First Edition
Fruit and Vegetable Products - Determination of Formic Acid Content - Part 2: Titrimetric Method First Edition; (Corrected and
Reprinted - 1985)
Cereals and Pulses - Determination of Hidden Insect Infestation - Part 1: General Principles First Edition
Cereals and Pulses - Determination of Hidden Insect Infestation - Part 2: Sampling First Edition
Cereals and Pulses - Determination of Hidden Insect Infestation - Part 3: Reference Method First Edition
Cereals and Pulses - Determination of Hidden Insect Infestation - Part 4: Rapid Methods First Edition;
Cereals and Milled Cereal Products - Automatic Sampling by Mechanical Means Second Edition
Rice - Determination of the Potential Milling Yield from Paddy and from Husked Rice Second Edition
Rice ù Determination of amylose content ù Part 1: Reference method First edition [Cancelled: ISO 6647]
Rice ù Determination of amylose content ù Part 2: Routine methods First Edition [Replaced: ISO 6647]
Animal Feeding Stuffs - Semi-Quantitative Determination of Aflatoxin B1 - Thin-Layer Chromatographic Methods Third Edition
ISO
6654
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6655
6656
6658
6659
6660
6661
6662
6663
6664
6665
6666
6667
6668
6669
6670
6673
ISO
6676
ISO
ISO
6682
6683
ISO
ISO
6685
6686
ISO
6689-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6689-2
6690
6691
6692
6695
6696
6697
Animal Feeding Stuffs - Determination of Urea Content First Edition
Animal Feeding Stuffs - Determination of Soluble Nitrogen Content After Treatment with Pepsin in Dilute Hydrochloric Acid First
Edition
Animal and Vegetable Fats and Oils - Determination of Polyethylene-Type Polymers Second Edition
Sensory analysis - Methodology - General guidance Second Edition
Sweet Pepper - Guide to Refrigerated Storage and Transport First Edition
Mangoes - Cold Storage Second Edition
Fresh Fruit and Vegetables - Arrangement of Parallelepipedic Packages in Land Transport Vehicles First Edition
Plums - Guide to Cold Storage First Edition
Garlic - Cold Storage Second Edition
Bilberries and Blueberries - Guide to Cold Storage First Edition
Strawberries - Guide to Cold Storage First Edition
Coffee Triers First Edition
Green Coffee - Determination of Proportion of Insect-Damaged Beans First Edition
Green Coffee - Preparation of Samples for Use in Sensory Analysis Technical Corrigendum 1 06/01/2000
Green and Roasted Coffee - Determination of Free-Flow Bulk Density of Whole Beans (Routine Method) First Edition
Instant Coffee - Sampling Method for Bulk Units with Liners Second Edition
Green coffee Determination of loss in mass at 105 C Second edition
Acid-Grade and Ceramic-Grade Fluorspar - Determination of Total Phosphorus Content - Reduced- Molybdophosphate
Spectrometric Method Third Edition
Earth-Moving Machinery - Zones of Comfort and Reach for Controls (CEN EN ISO 6682: 1995) Second Edition; Amendment 1: 1989
Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests Second Edition
Chemical Products for Industrial Use - General Method for Determination of Iron Content - 1,10-Phenanthroline Spectrophotometric
Method First Edition
Equipment for Crop Protection - Antidrip Devices - Determination of Performance Second Edition
Equipment for Harvesting - Combines and Functional Components - Part 1: Vocabulary Materiel De Recolte - MoissonneusesBatteuses Et Leurs Composants Fonctionnels - Partie 1: Vocabulaire First Edition
Equipment for Harvesting - Combines and Functional Components - Part 2: Assessment of Characteristics and Performance Defined
in Vocabulary First Edition
Milking machine installations ù Mechanical tests Third Edition
Thermoplastics Polymers for Plain Bearings - Classification and Designation Second Edition
Cycles - Marking of Cycle Components First Edition
Cycles - Pedal Axle and Crank Assembly with Square End Fitting - Assembly Dimensions First Edition
Cycles - Screw Threads Used in Bottom Bracket Assemblies First Edition
Cycles - Hubs and Freewheels - Assembly Dimensions First Edition
ISO
ISO
ISO
ISO
6698
6699
6701
6702-1
Cycles - Screw Threads Used to Assemble Freewheels on Bicycle Hubs Second Edition
Cycles - Stem and Handlebar Bend - Assembly Dimensions First Edition
Cycles - External Dimensions of Spoke Nipples First Edition
Aircraft - Requirements for On-Board Weight and Balance Systems - Part 1: General First Edition;
Aircraft - Requirements for On-Board Weight and Balance Systems - Part 2: Design, Performance and Interface Characteristics First
Edition
Water Quality - Determination of Cyanide - Part 1: Determination of Total Cyanide First Edition
Water Quality - Determination of Cyanide - Part 2: Determination of Easily Liberatable Cyanide First Edition
Water Quality - Determination of Cyanide - Part 3: Determination of Cyanogen Chloride First Edition
Automatic Steam Traps - Classification First Edition; (Corrected and Reprinted - 1983)
Plastics Laboratory Ware - Graduated Measuring Cylinders First Edition
Building and civil engineering Vocabulary Part 1: General terms Third Edition
Building and Civil Engineering - Vocabulary - Part 2: Contract Terms First Edition
Pipework Components - Definition and Selection of DN (Nominal Size) Second Edition; (CEN EN ISO 6708: 1995)
Standard Representation of Latitude, Longitude and Altitude for Geographic Point Locations First Edition
Single-Use Containers for Venous Blood Specimen Collection First Edition; (Corrected and Reprinted - 1996)
Paints and Varnishes - Preparation of Acid Extracts from Paints in Liquid or Powder Form Second Edition; (AS/NZS 1580.501.2:
1994)
Anodized Aluminium and Aluminium Alloys - Measurement of Reflectance Characteristics of Aluminium Surfaces Using IntegratingSphere Instruments First Edition
Agricultural Machinery - Equipment for Sowing, Planting, Distributing Fertilizers and Spraying - Recommended Working Widths
Second Edition
Plastics - Determination of Dynamic Mechanical Properties - Part 1: General Principles Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6702-2
6703-1
6703-2
6703-3
6704
6706
6707-1
6707-2
6708
6709
6710
ISO
6713
ISO
6719
ISO
ISO
6720
6721-1
ISO
6721-2
ISO
6721-3
Plastics - Determination of Dynamic Mechanical Properties - Part 2: Torsion-Pendulum Method First Edition; Corrigendum 1-1995
Plastics - Determination of Dynamic Mechanical Properties - Part 3: Flexural Vibration - Resonance-Curve Method First Edition;
Corrigendum 1-1995
ISO
6721-4
Plastics - Determination of Dynamic Mechanical Properties - Part 4: Tensile Vibration - Non-Resonance Method First Edition
ISO
6721-5 AMD 1
Plastics - Determination of Dynamic Mechanical Properties - Part 5: Flexural Vibration - Non-Resonance Method First Edition
ISO
ISO
ISO
6721-5
6721-6 AMD 1
6721-6
Plastics - Determination of Dynamic Mechanical Properties - Part 5: Flexural Vibration - Non-Resonance Method First Edition
Plastics - Determination of Dynamic Mechanical Properties - Part 6: Shear Vibration - Non-Resonance Method First Edition
Plastics - Determination of Dynamic Mechanical Properties - Part 6: Shear Vibration - Non-Resonance Method First Edition
ISO
6721-7 AMD 1
Plastics - Determination of Dynamic Mechanical Properties - Part 7: Torsional Vibration - Non-Resonance Method First Edition
ISO
6721-7
ISO
6721-8
ISO
6721-9
ISO
ISO
ISO
ISO
ISO
ISO
6721-10
6722
6725
6726
6727
6728
ISO
ISO
ISO
6730
6731
6732
Milk - Enumeration of colonyforming units of psychrotrophic microorganisms - Colony-count technique at 6,5 C Second Edition
Milk, Cream and Evaporated Milk - Determination of Total Solids Content (Reference Method) First Edition
Milk and Milk Products - Determination of Iron Content - Spectrometric Method (Reference Method) First Edition
ISO
ISO
ISO
6733
6734
6735
ISO
6741-1
ISO
6741-2
ISO
6741-3
Milk and milk products Determination of lead content Graphite furnace atomic absorption spectrometric method First Edition
Sweetened Condensed Milk - Determination of Total Solids Content (Reference Method) First Edition
Dried Milk - Assessment of Heat Class - Heat-Number Reference Method First Edition
Textiles - Fibres and Yarns - Determination of Commercial Mass of Consignments Part 1: Mass Determination and Calculations
Second Edition
Textiles - Fibres and Yarns - Determination of Commercial Mass of Consignments - Part 2: Methods for Obtaining Laboratory
Samples First Edition
Textiles - Fibres and Yarns - Determination of Commercial Mass of Consignments - Part 3: Specimen Cleaning Procedures First
Edition
ISO
6742-1
ISO
6742-2
Cycles - Lighting and Retro Reflective Devices - Photometric and Physical Requirements - Part 1: Lighting Equipment Second Edition
Cycles - Lighting and Retro-Reflective Devices - Photometric and Physical Requirements - Part 2: Retro-Reflective Devices Second
Edition
ISO
6743-1
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 1: Family A (Total Loss Systems) Second Edition
Plastics - Determination of Dynamic Mechanical Properties - Part 7: Torsional Vibration - Non-Resonance Method First Edition
Plastics - Determination of Dynamic Mechanical Properties - Part 8: Longitudinal and Shear Vibration - Wave-Propagation Method
First Edition
Plastics - Determination of Dynamic Mechanical Properties - Part 9: Tensile Vibration - Sonic Pulse Propagation Method First Edition
Plastics - Determination of Dynamic Mechanical Properties - Part 10: Complex Shear Viscosity Using a Parallel-Plate Oscillatory
Rheometer Second Edition
Road Vehicles - 60 V and 600 V Single-Core Cables - Dimensions, Test Methods and Requirements Second Edition
Road Vehicles - Dimensions of Two-Wheeled Mopeds and Motorcycles - Terms and Definitions First Edition
Mopeds and Motorcycles with Two Wheels - Masses - Vocabulary Second Edition
Road Vehicles - Motorcycles - Symbols for Controls, Indicators and Telltales First Edition
Photography - Camera Lenses - Determination of ISO Colour Contribution Index (ISO/CCI) First Edition
ISO
6743-2
ISO
6743-3
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 2: Family F (Spindle Bearings, Bearings and
Associated Clutches) First Edition
Lubricants, industrial oils and related products (class L) Classification Part 3: Family D (Compressors) First Edition; Replaces ISO
6743-3A and ISO 6743-3B
ISO
6743-4
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 4: Family H (Hydraulic Systems) Second Edition
ISO
ISO
ISO
6743-5
6743-6
6743-7
ISO
ISO
ISO
6743-8
6743-9
6743-10
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 5: Family T (Turbines) First Edition Second Edition
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 6: Family C (Gears) First Edition
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 7: Family M (Metalworking) First Edition
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 8: Family R (Temporary Protection Against Corrosion)
First Edition
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 9: Family X (Greases) Second Edition
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 10: Family Y (Miscellaneous) First Edition
ISO
6743-11
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 11: Family P (Pneumatic Tools) First Edition
ISO
ISO
ISO
6743-12
6743-13
6743-14
ISO
6743-15
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 12: Family Q (Heat Transfer Fluids) First Edition
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 13: Family G (Slideways) Second Edition
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 14: Family U (Heat Treatment) First Edition
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 15: Family E (Internal Combustion Engine Oils) First
Edition
ISO
ISO
ISO
ISO
ISO
ISO
6743-99
6744-1
6744-2
6744-3
6744-4
6745
ISO
6746-1
ISO
6746-2 CORR 1
ISO
6746-2
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 99: General First Edition; Replaces ISO 6743-0
Binders for Paints and Varnishes - Alkyd Resins - Part 1: General Methods of Test First Edition
Binders for Paints and Varnishes - Alkyd Resins - Part 2: Determination of Phthalic Anhydride Content First Edition
Binders for Paints and Varnishes - Alkyd Resins - Part 3: Determination of Unsaponifiable Matter Content First Edition
Binders for Paints and Varnishes - Alkyd Resins - Part 4: Determination of Fatty Acid Content First Editiion
Zinc Phosphate Pigments for Paints - Specifications and Methods of Test First Edition
Earth-moving machinery Definitions of dimensions and codes Part 1: Base machine Engins de terrassement DÚfinitions des
dimensions et des codes Partie 1: Engin de base Third Edition
Earth-moving machinery ù Definitions of dimensions and codes ù Part 2: Equipment and attachments TECHNICAL CORRIGENDUM
1 Engins de terrassement ù DÚfinitions des dimensions et des codes ù Partie 2: quipements et accessoires RECTIFICATIF
TECHNIQUE 1 Third Edition
Earth-moving machinery ù Definitions of dimensions and codes ù Part 2: Equipment and attachments Engins de terrassement ù
DÚfinitions des dimensions et des codes ù Partie 2: quipements et accessoires Third Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6747
6749
6750
6751
6752
6753-1
6753-2
6754
6755
6756
6757
6758
6759
6761
Earth-moving machinery Tractor-dozers Terminology and commercial specifications Third Edition; Amendment 1: 05/01/2003
Earth-Moving Machinery - Preservation and Storage Second Edition
Earth-moving machinery - Operator s manual - Content and format Third Edition
Tools for Moulding - Ejector Pins with Cylindrical Head Third Edition
Round Punches with 60 Degrees Conical Head and Straight Shank First Edition
Tools for Pressing and Moulding - Machined Plates - Part 1: Machined Plates for Press Tools Second Edition
Tools for Pressing and Moulding - Machined Plates - Part 2: Machined Plates for Moulds First Edition
Dried Thyme (Thymus Vulgaris L.) - Specification Second Edition
Dried Sour Cherries - Specification Second Edition
Decorticated Stone Pine Nuts - Specification First Edition
Decorticated Kernels of Mahaleb Cherries - Specification First Edition
Welded Steel Tubes for Heat Exchangers First Edition
Seamless Steel Tubes for Heat Exchangers First Edition
Steel Tubes - Preparation of Ends of Tubes and Fittings for Welding First Edition
ISO
ISO
ISO
6764
6765
6766
ISO
6767
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6768
6770
6771
6772
6773
6777
6778
6779
ISO
ISO
ISO
6780
6781
6782
Ambient Air - Determination of the Mass Concentration of Nitrogen Dioxide - Modified Griess-Saltzman Method Second Edition
Instant Tea - Determination of Free-Flow and Compacted Bulk Densities First Edition
Aerospace ù Fluid systems and components ù Pressure and temperature classifications Third Edition
Aerospace - Fluid Systems - Impulse Testing of Hydraulic Hose, Tubing and Fitting Assemblies Second Edition
Aerospace Fluid Systems - Thermal Shock Testing of Piping and Fittings Second Edition
Water Quality - Determination of Nitrite - Molecular Absorption Spectrometric Method First Edition; (CEN EN 26777: 1993)
Water Quality - Determination of Ammonium - Potentiometric Method First Edition
Acceptance Conditions for Broaching Machines of Vertical Internal Type - Testing of Accuracy First Edition
Flat pallets for intercontinental materials handling Principal dimensions and tolerances Second Edition; Corrected and Reprinted
04/15/04
Thermal Insulation - Qualitative Detection of Thermal Irregularities in Building Envelopes - Infrared Method First Edition
Aggregates for Concrete - Determination of Bulk Density First Edition
ISO
6783
Coarse Aggregates for Concrete - Determination of Particle Density and Water Absorption - Hydrostatic Balance Method First Edition
Shipbuilding - Shipborne Barges, Series 1 - Lifting Post Casting - Arrangement, Dimensions and Method of Testing First Edition
Shipbuilding - Shipborne Barges, Series 3 - Main Dimensions First Edition
Shipbuilding - Shipborne Barges, Series 4 - Main Dimensions First Edition
Ambient Air - Determination of the Mass Concentration of Sulfur Dioxide - Tetrachloromercurate (TCM)/Pararosaniline Method First
Edition
ISO
ISO
ISO
ISO
ISO
6784
6785
6786
6787
6788
ISO
6789
ISO
6790
ISO
ISO
ISO
6791
6796
6797
ISO
6798
ISO
ISO
ISO
ISO
ISO
6800
6801
6802
6803
6804
ISO
ISO
ISO
6805
6806
6807
Concrete - Determination of Static Modulus of Elasticity in Compression First Edition
Milk and Milk Products - Detection of Salmonella spp. Second Edition; IDF 93
Road Vehicles - Air Braking Systems - Identification of Connections on Units First Edition
Assembly Tools for Screws and Nuts - Adjustable Wrenches Second Edition
Assembly Tools for Screws and Nuts - Four-Way Socket Wrenches - Dimensions and Torque Test Second Edition
Assembly Tools for Screws and Nuts - Hand Torque Tools - Requirements and Test Methods for Design Conformance Testing,
Quality Conformance Testing and Recalibration Procedure Third Edition
Equipment for Fire Protection and Fire Fighting - Graphical Symbols for Fire Protection Plans - Specification First Edition; (PNS 6790:
1992)
Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Content of Quinoline-Insoluble
Material First Edition
Polyglycols for Industrial Use - Determination of Hydroxyl Number - Phthalic Anhydride Esterification Method First Edition
Road Vehicles - Motor Vehicles - Production Conformity Requirements for Flasher Units First Edition
Reciprocating Internal Combustion Engines - Measurement of Emitted Airborne Noise - Engineering Method and Survey Method First
Edition
Animal and Vegetable Fats and Oils - Determination of the Composition of Fatty Acids in the 2-Position of the Triglyceride Molecules
Second Edition
Rubber or Plastics Hoses - Determination of Volumetric Expansion First Edition; (CEN EN 26801: 1993)
Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing Third Edition
Rubber or Plastics Hoses and Hose Assemblies - Hydraulic-Pressure Impulse Test without Flexing Second Edition
Rubber Hoses and Hose Assemblies for Washing-Machines and Dishwashers - Specification for Inlet Hoses Second Edition
Rubber Hoses and Hose Assemblies for Underground Mining - Wire-Reinforced Hydraulic Types for Coal Mining - Specification
Second Edition
Rubber Hoses and Hose Assemblies for Use in Oil Burners - Specification Second Edition; (CEN EN ISO 6806: 1995)
Rubber hoses and hose assemblies for rotary drilling and vibration applications Specification Second Edition
ISO
6808
Plastics Hoses and Hose Assemblies for Suction and Low-Pressure Discharge of Petroleum Liquids - Specification Second Edition
ISO
ISO
6810
6811
Rubber Compounding Ingredients - Carbon Black - Determination of Surface Area - CTAB Adsorption Methods Second Edition
Spherical Plain Bearings - Vocabulary Rotules Lisses - Vocabulaire Second Edition; Technical Corrigendum 1:07/15/1999
ISO
6812
ISO
ISO
6813
6814
Roll on/Roll off Ship-to-Shore Connection - Interface Between Terminals and Ships with Straight Stern/Bow Ramps First Edition
Road Vehicles - Collision Classification - Terminology Vehicules Routiers - Classification Des Collisions - Terminologie Second
Edition
Machinery for Forestry - Mobile and Self-Propelled Machinery - Terms, Definitions and Classification Second Edition
ISO
ISO
ISO
ISO
6817
6820
6822
6826
ISO
ISO
ISO
6827
6830
6835
ISO
ISO
ISO
6836
6837
6839
ISO
6840
ISO
6841
ISO
6842
ISO
ISO
6843
6844
ISO
6845
ISO
ISO
ISO
ISO
ISO
ISO
6846
6847
6848
6849
6851
6853
ISO
6855
ISO
ISO
6856
6858
Measurement of Conductive Liquid Flow in Closed Conduits - Method Using Electromagnetic Flowmeters First Edition CEN EN ISO
6817: 1995
Wheat Flour and Rye Flour - General Guidance on the Drafting of Bread-Making Tests First Edition
Potatoes, Root Vegetables and Round-Headed Cabbages - Guide to Storage in Silos Using Forced Ventilation First Edition
Reciprocating Internal Combustion Engines - Fire Protection Second Edition
Aluminium and Aluminium Alloys - Determination of Titanium Content - Diantipyrylmethane Photometric Method First Edition
Iron Ores - Determination of Aluminium Content - EDTA Titrimetric Method First Edition
Surface Active Agents - Washing Powders - Determination of Total Boron Content - Titrimetric Method First Edition
Surface Active Agents - Mercerizing Agents - Evaluation of the Activity of Wetting Products for Mercerization by Determination of the
Shrinkage Rate of Cotton First Edition
Surface Active Agents - Water Dispersing Power in Dry Cleaning Solvents First Edition
Anionic Surface Active Agents - Determination of Solubility in Water First Edition
Cationic Surface Active Agents (Hydrochlorides and Hydrobromides) - Determination of Critical Micellization Concentration - Method
by Measurement of Counter Ion Activity First Edition
Surface Active Agents - Technical Straight-Chain Sodium Alkylbenzenesulfonates - Determination of Mean Relative Molecular Mass
by Gas-Liquid Chromatography Second Edition
Surface Active Agents - Sulfated Ethoxylated Alcohols and Alkylphenols - Determination of Total Active Matter Content Second
Edition
Surface Active Agents - Sulfated Ethoxylated Alcohols and Alkyphenols - Estimation of the Mean Relative Molecular Mass First
Edition
Surface Active Agents - Determination of Mineral Sulfate Content - Titrimetric Method First Edition
Surface Active Agents - Technical Alkane Sulfonates - Determination of the Mean Relative Molecular Mass of the Alkane
Monosulfonates and the Alkane Monosulfonate Content Second Edition
Photography - Black-and-White Continuous-Tone Papers - Determination of ISO Speed and ISO Range for Printing Second Edition
Welding Consumables - Deposition of a Weld Metal Pad for Chemical Analysis Second Edition
Arc welding and cutting Nonconsumable tungsten electrodes Classification Second Edition
Photography - Processing Wastes - Determination of Boron First Edition
Photography - Processing Waste - Determination of Total Amino Nitrogen (Microdiffusion Kjeldahl Method) Second Edition
Photography - Processing Waste - Determination of Ammoniacal Nitrogen (Microdiffusion Method) Second Edition
Road Vehicles - Measurement Methods for Gaseous Pollutants Emitted by Mopeds Equipped with a Controlled Ignition Engine
Second Edition
Road Vehicles - Unscreened High-Tension Ignition Cable Assemblies - General Requirements and Test Methods Second Edition
Third Edition
Aircraft - Ground Support Electrical Supplies - General Requirements First Edition; Replaces ISO 223: 1975
ISO
ISO
6859-1
6860
Aircraft - Proximity Switches - Part 1: General Requirements First Edition
Paints and varnishes Bend test (conical mandrel) Second Edition
ISO
ISO
ISO
ISO
6861
6862
6865
6866
Information and Documentation - Glagolitic Alphabet Coded Character Set for Bibliographic Information Interchange First Edition
Information and Documentation - Mathematical Coded Character Set for Bibliographic Information Interchange First Edition
Animal Feeding Stuffs - Determination of Crude Fibre Content - Method with Intermediate Filtration First Edition
Animal Feeding Stuffs - Determination of Free and Total Gossypol First Edition
ISO
6867
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6869
6870
6872
6873
6874
6875
6876
6877
6878
Animal Feeding Stuffs - Determination of Vitamin E Content - Method Using High-Performance Liquid Chromatography First Edition
Animal Feeding Stuffs - Determination of the Contents of Calcium, Copper, Iron, Magnesium, Manganese, Potassium, Sodium and
Zinc - Method Using Atomic Absorption Spectrometry First Edition
Animal Feeding Stuffs - Qualitative Determination of Zearalenone
Dental Ceramic Second Edition; Amendment 1-1997,Corrected and Reprinted 06/15/1998
Dental Gypsum Products Second Edition
Dentistry Polymer-based pit and fissure sealants Second Edition
Dental Patient Chair Second Edition
Dental Root Canal Sealing Materials Second Edition
Dental Root-Canal Obturating Points Second Edition
Water quality Determination of phosphorus Ammonium molybdate spectrometric method Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
6880
6882
6883
6884
6885
6886
Machinery for Agriculture - Trailed Units of Shallow Tillage Equipment - Main Dimensions and Attachment Points First Edition
Asparagus - Guide to Refrigerated Transport First Edition
Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) Fourth Edition
Animal and Vegetable Fats and Oils - Determination of Ash First Edition
Animal and vegetable fats and oils Determination of anisidine value Third Edition
Animal and vegetable fats and oils Determination of oxidative stability (accelerated oxidation test) Second Edition
ISO
6887-1
ISO
6887-2
ISO
6887-3
ISO
6887-4 CORR 1
Microbiology of Food and Animal Feeding Stuffs - Preparation of Test Samples, Initial Suspension and Decimal Dilutions for
Microbiological Examination - Part 1: General Rules for the Preparation of the Initial Suspension and Decimal Dilutions First Edition
Microbiology of food and animal feeding stuffs preparation of test samples, initial suspension and decimal dilutions for
microbiological examination Part 2: Specific rules for the preparation of meat and meat products First Edition
Microbiology of food and animal feeding stuffs Preparation of test samples, initial suspension and decimal dilutions for
microbiological examination Part 3: Specific rules for the preparation of fish and fishery products First Edition
Microbiology of food and animal feeding stuffs ù Preparation of test samples, initial suspension and decimal dilutions for
microbiological examination ù Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat
products, and fish and fishery products TECHNICAL CORRIGENDUM 1 First Edition
ISO
6887-4
ISO
6888-1
ISO
6888-2
ISO
ISO
6888-3
6889
ISO
ISO
ISO
6891
6892
6896
ISO
ISO
ISO
ISO
6897
6898
6899
6906
ISO
ISO
6914
6915
ISO
6916-1 AMD 1
ISO
6916-1 CORR 1
ISO
6916-1
ISO
ISO
ISO
ISO
6916-2
6922
6924
6925
Microbiology of food and animal feeding stuffs ù Preparation of test samples, initial suspension and decimal dilutions for
microbiological examination ù Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat
products, and fish and fishery products First Edition
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Coagulase-Positive Staphylococci
(Staphylococcus Aureus and Other Species) - Part 1: Technique Using Baird-Parker Agar Medium First Edition; Amendment 1, 7/1/03
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Coagulase-Positive Staphylococci
(Staphylococcus Aureus and Other Species) - Part 2: Technique Using Rabbit Plasma Fibrinogen Agar Medium First Edition;
Amendment 1, 07/01/03
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Coagulase-Positive Staphylococci
(Staphylococcus Aureus and Other Species) - Part 3: Detection and MPN Technique for Low Numbers First Edition; Corrected
version: 01/15/2004
Surface Active Agents - Determination of Interfacial Tension by Drawing up Liquid Films Second Edition
Timber Structures - Joints Made with Mechanical Fasteners - General Principles for the Determination of Strength and Deformation
Characteristics First Edition
Metallic Materials - Tensile Testing at Ambient Temperature Second Edition
Cinematography - Intermittent Sprockets for 35 mm Motion-Picture Projectors - Dimensions First Edition
Guidelines for the Evaluation of the Response of Occupants of Fixed Structures, Especially Buildings and Off-Shore Structures, to
Low-Frequency Horizontal Motion (0,063 to 1 Hz) First Edition
Open Front Mechanical Power Presses - Capacity Ratings and Dimensions First Edition
Acceptance Conditions of Open Front Mechanical Power Presses - Testing of the Accuracy First Edition
Vernier Callipers Reading to 0,02 mm First Edition
Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation Second Edition
Flexible Cellular Polymeric Materials - Polyurethane Foam for Laminate Use - Specification Second Edition
Flexible cellular polymeric materials ù Sponge and expanded cellular rubber products ù Specification Part 1: Sheeting AMENDMENT
1 First Edition
Flexible cellular polymeric materials ù Sponge and expanded cellular rubber products ù Specification ù Part 1: Sheeting TECHNICAL
CORRIGENDUM 1 First Edition
Flexible cellular polymeric materials ù Sponge and expanded cellular rubber products ù Specification ù Part 1: Sheeting First Edition
Flexible Cellular Polymeric Materials - Sponge and Expanded Cellular Rubber Products - Specification - Part 2: Mouldings and
Extrusions First Edition
Adhesives - Determination of Tensile Strength of Butt Joints First Edition; (CEN EN 26922: 1993)
Correspondence Envelopes - Vocabulary First Edition
Textile Floor Coverings - Burning Behaviour - Tablet Test at Ambient Temperature First Edition
ISO
ISO
ISO
6926
6927
6929
ISO
6930-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6930-2
6931-1
6931-2
6932
6933
6934-1
6934-2
6934-3
6934-4
6934-5
6935-1
6935-2
6935-3
ISO
ISO
ISO
ISO
ISO
ISO
6936
6937
6938
6939
6940
6941
ISO
ISO
ISO
ISO
6942
6943
6944
6945
ISO
6946
ISO
6947
Acoustics - Requirements for the Performance and Calibration of Reference Sound Sources Used for the Determination of Sound
Power Levels Second Edition; Corrected and Reprinted 12/01/2000
Building Construction - Jointing Products - Sealants - Vocabulary First Edition
Steel Products - Definitions and Classification First Edition
High Yield Strength Steel Plates and Wide Flats for Cold Forming - Part 1: Delivery Conditions for Thermomechanically-Rolled Steels
First Edition; Together with ISO 6930-2, Cancels and Replaces ISO 6930: 1983
High Yield Strength Steel Plates and Wide Flats for Cold Forming - Part 2: Delivery Condition for Normalized, Normalized Rolled and
as-rolled Steels First Edition
Stainless Steels for Springs - Part 1: Wire Second Edition
Stainless steels for springs Part 2: Narrow strip Second Edition
Cold-Reduced Carbon Steel Strip with a Maximum Carbon Content of 0,25% Second Edition
Railway Rolling Stock Material - Magnetic Particle Acceptance Testing First Edition
Steel for the Prestressing of Concrete - Part 1: General Requirements First Edition
Steel for the Prestressing of Concrete - Part 2: Cold-Drawn Wire First Edition
Steel for the Prestressing of Concrete - Part 3: Quenched and Tempered Wire First Edition
Steel for the Prestressing of Concrete - Part 4: Strand First Edition; Corrigendum 1: 1992; Corrigendum 2: 2000
Steel for the Prestressing of Concrete - Part 5: Hot-Rolled Steel Bars with or without Subsequent Processing First Edition
Steel for the reinforcement of concrete ù Part 1: Plain bars Second Edition
Steel for the reinforcement of concrete ù Part 2: Ribbed bars Second Edition
Steel for the Reinforcement of Concrete - Part 3: Welded Fabric First Edition Corrigendum 1: 2000
Information Processing - Conversion Between the Two Coded Character Sets of ISO 646 and ISO 6937-2 and the CCITT
International Telegraph Alphabet No. 2 (ITA 2) Second Edition
Information Technology - Coded Graphic Character Set for Text Communication - Latin Alphabet Third Edition
Textiles - Natural Fibres - Generic Names and Definitions First Edition
Textiles - Yarns from Packages - Method of Test for Breaking Strength of Yarn by the Skein Method Second Edition
Textile fabrics Burning behaviour Determination of ease of ignition of vertically oriented specimens Second Edition
Textile fabrics Burning behaviour Measurement of flame spread properties of vertically oriented specimens Second Edition
Protective Clothing - Protection Against Heat and Fire - Method of Test: Evaluation of Materials and Material Assemblies When
Exposed to a Source of Radiant Heat Third Edition
Rubber, Vulcanized - Determination of Tension Fatigue Second Edition
Fire Resistance Tests - Ventilation Ducts First Edition
Rubber Hoses - Determination of Abrasion Resistance of the Outer Cover Second Edition; Amendment 1: 12/15/1998
Building Components and Building Elements - Thermal Resistance and Thermal Transmittance - Calculation Method First Edition;
Supersedes 6946-1 and 6946-2; CEN EN ISO 6946: 1996; Amendment 1: 05/15/2003
Welds - Working Positions - Definitions of Angles of Slope and Rotation (Revision of ISO 6947:1980) Second Edition; (Corrected and
Reprinted - 1993)
ISO
ISO
ISO
6948
6949
6951
ISO
6952
ISO
6953-1
ISO
6953-2
ISO
6954
ISO
ISO
6955
6957
ISO
6962
ISO
ISO
6964
6965
ISO
6966-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
6966-2
6967
6968
6969
6970
6971
6972
6973
ISO
6974-1
ISO
6974-2
Automatic Steam Traps - Production and Performance Characteristic Tests First Edition
Fruits and Vegetables - Principles and Techniques of the Controlled Atmosphere Method of Storage First Edition
Information Processing - Processor System Bus Interface (Eurobus A) First Edition
Fluid Power Systems and Components - Two-Pin Electrical Plug Connectors with Earth Contact - Characteristics and Requirements
Second Edition
Pneumatic Fluid Power - Compressed Air Pressure Regulators and Filter-Regulators - Part 1: Main Characteristics to Be Included in
Literature from Suppliers and Product-Marking Requirements Second Edition; Corrigendum: 4/1/2006
Pneumatic Fluid Power - Compressed Air Pressure Regulators and Filter-Regulators - Part 2: Test Methods to Determine the Main
Characteristics to be Included in Literature from Suppliers First Edition
Mechanical Vibration - Guidelines for the Measurement, Reporting and Evaluation of Vibration with Regard to Habitability on
Passenger and Merchant Ships Second Edition
Analytical Spectroscopic Methods - Flame Emission, Atomic Absorption, and Atomic Fluorescence - Vocabulary First Edition
Copper Alloys - Ammonia Test for Stress Corrosion Resistance First Edition
Nuclear energy Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level
radioactive waste Second Edition
Polyolefin Pipes and Fittings - Determination of Carbon Black Content by Calcination and Pyrolysis - Test Method and Basic
Specification First Edition
Aircraft - Self-Propelled Gantry for Lifting Air Cargo Containers and Outside Cargoes - Functional Requirements First Edition
Aircraft Ground Equipment - Basic Requirements - Part 1: General Design Requirements First Edition; Together with ISO 6966-2,
Cancels and Replaces ISO 6966:1993
Aircraft Ground Equipment - Basic Requirements - Part 2: Safety Requirements First Edition; Together with ISO 6966-1, Cancels and
Replaces ISO 6966:1993
Aircraft ground equipment Main deck loader Functional requirements Third Edition
Aircraft ground equipment Lower deck loader Functional requirements Third Edition
Road Vehicles - Sound Signalling Devices - Tests After Mounting on Vehicle Third Edition
Motorcycles and Mopeds - Pollution Tests - Chassis Dynamometer Bench First Edition
Cranked-Link Drag Chains of Welded Construction, Attachments and Sprockets Second Edition
Cranked-Link Mill Chains of Welded Construction, Attachments and Sprockets Second Edition
Drop-Forged Rivetless Chains for Conveyors First Edition
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 1: Guidelines for Tailored
Analysis First Edition; Replaces ISO 6974: 1984
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 2: Measuring-System
Characteristics and Statistics for Processing of Data First Edition; Replaces ISO 6974: 1984
ISO
6974-3
ISO
6974-4
ISO
6974-5
ISO
6974-6 CORR 1
ISO
ISO
6974-6
6975
ISO
6976
ISO
6978-1
ISO
6978-2 CORR 2
ISO
6978-2 CORR 1
ISO
6978-2
ISO
6980-1
ISO
6980-2
ISO
6980-3
ISO
ISO
ISO
6983-1
6984
6986
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 3: Determination of Hydrogen,
Helium, Oxygen, Nitrogen, Carbon Dioxide and Hydrocarbons up to C8 Using Two Packed Columns First Edition; Replaces ISO
6974: 1984
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 4: Determination of Nitrogen,
Carbon Dioxide and C1 to C5 and C6+ Hyrdocarbons for a Laboratory and On-Line Measuring System Using Two Columns First
Edition; Replaces ISO 6974: 1984
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 5: Determination of Nitrogen,
Carbon Dioxide and C1 to C5 and C6+ Hyrdocarbons for a Laboratory and On-Line Process Application Using Three Columns First
Edition; Replaces ISO 6974: 1984
Natural gas ù Determination of composition with defined uncertainty by gas chromatography ù Part 6: Determination of hydrogen,
helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns First Edition
Natural gas ù Determination of composition with defined uncertainty by gas chromatography ù Part 6: Determination of hydrogen,
helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns First Edition
Natural Gas - Extended Analysis - Gas-Chromatographic Method Second Edition
Natural Gas - Calculation of Calorific Values, Density, and Relative Density and Wobbe Index from Composition Second Edition;
Corrected and Reprinted 02/01/1996; Corrigendum 2: 12/15/1997; Corrigendum 3: 08/01/1999
Natural Gas - Determination of Mercury - Part 1: Sampling of mercury by chemisorption on iodine First Edition; This Standard
Together with ISO 6978-2 Replaces ISO 6978
Natural gas ù Determination of mercury ù Part 2: Sampling of mercury by amalgamation on gold/platinum alloy TECHNICAL
CORRIGENDUM 2 First Edition
Natural gas ù Determination of mercury ù Part 2: Sampling of mercury by amalgamation on gold/platinum alloy TECHNICAL
CORRIGENDUM 1 First Edition
Natural gas ù Determination of mercury ù Part 2: Sampling of mercury by amalgamation on gold/platinum alloy First Edition; This
Standard Together with ISO 6978-1 Replaces ISO 6978
Nuclear energy Reference beta-particle radiation Part 1: Methods of production First Edition; Together with ISO 6980-2:2004 and
ISO 6980-3:2006 Supersedes ISO 6980:1996
Nuclear energy Reference beta-particle radiation Part 2: Calibration fundamentals related to basic quantities characterizing the
radiation field First Edition; Together with ISO 6980-1:2006 and ISO 6980-3:2006 Supersedes ISO 6980:1996
Nuclear energy Reference beta-particle radiation Part 3: Calibration of area and personal dosemeters and the determination of their
response as a function of beta radiation energy and angle of incidence First Edition; Together with ISO 6980-1:2006 and ISO 69802:2004 Supersedes ISO 6980:1996
Numerical Control of Machines - Program Format and Definition of Address Words - Part 1: Data Format for Positioning, Line Motion
and Contouring Control Systems First Edition
Round Non-Alloy Steel Wires for Stranded Wire Ropes for Mine Hoisting - Specifications Second Edition
Side and Face Milling (Slotting) Cutters with Indexable Inserts - Dimensions First Edition; (ANSI 6986-1983)
ISO
6987
ISO
6988
ISO
6989
ISO
6993-1
ISO
6993-2
ISO
6993-3
ISO
ISO
ISO
6993-4
6994
6995
ISO
6997
ISO
6998
ISO
6999
ISO
ISO
ISO
7000
7001
7002
ISO
ISO
ISO
ISO
ISO
ISO
7004
7005-1
7005-2
7005-3
7006
7007
Indexable Hard Material Inserts with Rounded Corners, with Partly Cylindrical Fixing Hole - Dimensions First Edition; Cancels and
Replaces ISO 6987-1: 1983, ISO 6987-2:1990 and ISO/TR 6987-3: 1990
Metallic and Other Non-Organic Coatings - Sulfur Dioxide Test with General Condensation of Moisture First Edition; (CEN EN ISO
6988: 1994)
Textile Fibres - Determination of Length and Length Distribution of Staple Fibres (by Measurement of Single Fibres) Firts Edition;
Replaces ISO 270: 1975
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 1: Pipes for a maximum
operating pressure of 1 bar (100 kPa) First Edition; Together with ISO 6993-2 thru ISO 6993-4 replaces ISO 6993: 2001
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 2: Fittings for a maximum
operating pressure of 200 mbar (20 kPa) First Edition; Together with ISO 6993-1, ISO 6993-3 and ISO 6993-4: 2006 replaces ISO
6993: 2001
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 3: Fittings and saddles for a
maximum operating pressure of 1 bar (100 kPa) First Edition; Together with ISO 6993-1, ISO 6993-2 and ISO 6993-4: 2006 replaces
ISO 6993: 2001
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 4: Code of practice for design,
handling and installation First Edition; Together with ISO 6993-1 thru ISO 6993-3: 2006 replaces ISO 6993: 2001
Aluminium Ores - Determination of Aluminium Content - EDTA Titrimetric Method First Edition
Aluminium Ores - Determination of Titanium Content - 4,4 -Diantipyrylmethane Spectrophotometric Method First Edition
Carbonaceous Materials for the Production of Aluminium - Calcined Coke - Determination of Apparent Oil Content - Heating Method
First Edition
Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Coking Value Second Edition;
Technical Corrigendum 1: 03-01-1999
Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Density - Pyknometric Method First
Edition
Graphical symbols for use on equipment Index and synopsis Symboles graphiques utilisables sur le matÚriel Index et tableau
synoptique Third Edition
Public Information Symbols Second Edition;Amendment 1-1993; PNS 1082: 1992
Agricultural Food Products - Layout for a Standard Method of Sampling from a Lot First Edition
Photography - Industrial Radiographic Film - Determination of ISO Speed, ISO Average Gradient and ISO G2 and G4 When Exposed
to X- and Gamma-Radiation Second Edition
Metallic Flanges - Part 1: Steel Flanges First Edition; (AS/NZS 4331.1: 1995)
Metallic Flanges - Part 2: Cast Iron Flanges First Edition; (AS/NZS 4331.2: 1995)
Metallic Flanges - Part 3: Copper Alloy and Composite Flanges First Edition; (AS/NZS 4331.3: 1995)
Woodworking Machines - Diameters of Spindles for Receiving Circular Sawblades First Edition
Woodworking Machines - Table Bandsawing Machines - Nomenclature and Acceptance Conditions First Edition
Woodworking Machines - Single Blade Circular Saw Benches with or without Travelling Table - Nomenclature and Acceptance
Conditions First Edition
Woodworking Machines - Single Spindle Moulding Machines - Nomenclature and Acceptance Conditions First Edition
Graphical symbols ù Safety colours and safety signs ù Safety signs used in workplaces and public areas AMENDMENT 2 First
Edition
Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas First Edition
Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas First Edition
Packaging - Sacks - Method of Sampling Empty Sacks for Testing First Edition; (CEN EN 27023: 1992)
Diesel Engines - Screw-In Injection Nozzle Holders, Types 20, 21, 21.1 and 27 for Pintle Nozzle SizeS"
Water Quality - Determination of Turbidity Third Edition
Acoustics - Statistical Distribution of Hearing Thresholds as a Function of Age Second Edition
Road Vehicles - Screw-Mounted Injection Nozzle Holders, Types 12, 13, 14, 15, 16, 17, 18 and 19 Second Edition
Fine and Coarse Aggregates for Concrete - Determination of the Particle Mass-per-Volume and Water Absorption - Pyknometer
Method First Edition
Prevailing Torque Type Hexagon Nuts (with Non-Metallic Insert), Style 1 - Property Classes 5, 8 and 10 Second Edition
Prevailing Torque Type Hexagon Nuts (with Non-Metallic Insert), Style 2 - Property Classes 9 and 12 Third Edition
Prevailing Torque Type All-Metal Hexagon Nuts, Style 2 - Property Classes 5, 8, 10 and 12 Second Edition
Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallic Insert) - Product Grades A and B Second Edition
Prevailing Torque Type All-Metal Hexagon Nuts with Flange - Product Grades A and B Second Edition
Pan Head Screws with Type H or Type Z Cross Recess - Product Grade A Second Edition
Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel of
Property Class 4.8 First Edition
Cross Recessed Countersunk Flat Head Screws (Common Head Style) - Grade A - Part 2: Steel of Property Class 8.8, Stainless
Steel and Non-Ferrous Metals First Edition; (CEN EN ISO 7046-2: 1994)
ISO
ISO
7008
7009
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7010 AMD 2
7010 AMD 1
7010
7023
7026
7027
7029
7030
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7033
7040
7041
7042
7043
7044
7045
ISO
7046-1
ISO
7046-2
ISO
ISO
ISO
7047
7048
7049
ISO
7050
Countersunk Raised Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A Second Edition
Cross Recessed Cheese Head Screws First Edition; Corrected and Reprinted 02/01/1999
Cross Recessed Pan Head Tapping Screws First Edition
Cross Recessed Countersunk (Flat) Head Tapping Screws (Common Head Style) First Edition; (CEN EN ISO 7050: 1994) (AS/NZS
4407: 1996)
ISO
ISO
ISO
ISO
ISO
7051
7053
7056
7057
7059
Cross Recessed Raised Countersunk (Oval) Head Tapping Screws First Edition; (CEN EN ISO 7051: 1994) (AS/NZS 4408: 1996)
Hexagon Washer Head Tapping Screws First Edition; (AS/NZS 4409: 1996)
Plastics Laboratory Ware - Beakers First Edition
Plastics Laboratory Ware - Filter Funnels First Edition
Caprolactam for Industrial Use - Determination of Absorbance at a Wavelength of 290 nm First Edition
ISO
7061
Shipbuilding - Aluminium Shore Gangways for Seagoing Vessels Second Edition
ISO
ISO
7063
7064
ISO
7065-1
ISO
7065-2
ISO
7066-2
Rolling bearings Needle roller bearing track rollers Boundary dimensions and tolerances Second Edition; Replaces ISO 6278
Information Technology - Security Techniques - Check Character Systems First Edition
Information Processing - Data Interchange on 200 mm (8 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on Both Sides - Part 1: Dimensional, Physical and Magnetic Characteristics Second
Edition; CAN/CGSB-186.3-93
Information Processing - Data Interchange on 200 mm (8 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on Both Sides - Part 2: Track Format First Edition
Assessment of Uncertainty in the Calibration and Use of Flow Measurement Devices - Part 2: Non-Linear Calibration Relationships
First Edition
ISO
7072
Tractors and Machinery for Agriculture and Forestry - Linch Pins and Spring Pins - Dimensions and Requirements Second Edition
ISO
7077
Measuring Methods for Building - General Principles and Procedures for the Verification of Dimensional Compliance First Edition
ISO
ISO
ISO
ISO
ISO
ISO
7078
7079
7083
7085
7086-1
7086-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7087
7088
7089
7090
7091
7092
7093-1
7093-2
7094
7096
Building Construction - Procedures for Setting out, Measurement and Surveying - Vocabulary and Guidance Notes First Edition
Core Drills with Parallel Shanks and with Morse Taper Shanks First Edition
Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and Dimensions First Edition
Mechanical and Performance Requirements of Case Hardened and Tempered Metric Thread Rolling Screws First Edition
Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 1: Test Method Second Edition
Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible Limits Second Edition
Ferroalloys - Experimental Methods for the Evaluation of the Quality Variation and Methods for Checking the Precision of Sampling
First Edition
Fish-Meal - Vocabulary First Edition
Plain Washers - Normal Series - Product Grade A Second Edition
Plain Washers, Chamfered - Normal Series - Product Grade A Second Edition
Plain Washers - Normal Series - Product Grade C Second Edition
Plain Washers - Small Series - Product Grade A Second Edition
Plain Washers - Large Series - Part 1: Product Grade A First Edition; Corrected and Reprinted 02/01/2001
Plain Washers - Large Series - Part 2: Product Grade C First Edition
Plain Washers - Extra Large Series - Product Grade C Second Edition; Technical Corrigendum 1 12/01/2000
Earth-Moving Machinery - Laboratory Evaluation of Operator Seat Vibration Third Edition
ISO
7097-1
Nuclear fuel technology Determination of uranium in solutions, uranium hexafluoride and solids Part 1: Iron(II) reduction/potassium
dichromate oxidation titrimetric method First Edition; Together with ISO 7097-2:2004 replaces ISO 7097:1983 and ISO 9989:1996
ISO
ISO
7097-2
7098
ISO
ISO
7103
7105
ISO
ISO
7106
7108
ISO
7109
ISO
ISO
ISO
ISO
ISO
7112
7113
7114
7116
7117
ISO
7119
ISO
ISO
7120
7121
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7129
7130
7131
7132
7133
7134
7135
7136
7137
7138
7139
7140
Nuclear fuel technology Determination of uranium in solutions, uranium hexafluoride and solids Part 2: Iron(II) reduction/cerium(IV)
oxidation titrimetric method First Edition; Together with ISO 7097-1:2004 Replaces ISO 7097:1993 and ISO 9989:1996
Information and Documentation - Romanization of Chinese Second Edition
Liquefied Anhydrous Ammonia for Industrial Use - Sampling - Taking a Laboratory Sample First Edition; (Corrected and Reprinted 1983)
Liquefied Anhydrous Ammonia for Industrial Use - Determination of Water Content - Karl Fischer Method First Edition
Liquefied Anhydrous Ammonia for Industrial Use - Determination of Oil Content - Gravimetric and Infra-Red Spectrometric Methods
First Edition
Ammonia Solution for Industrial Use - Determination of Ammonia Content - Titrimetric Method First Edition
Ammonia Solution for Industrial Use - Determination of Residue After Evaporation at 105 Degrees Celsius - Gravimetric Method First
Edition
Machinery for Forestry - Portable Hand-Held Brush-Cutters and Grass-Trimmers - Vocabulary Materiel Forestier - Debroussailleuses
Et Coupe-Herbe Portatifs - Vocabulaire Second Edition
Portable Hand-Held Forestry Machines - Cutting Attachments for Brush Cutters - Single-Piece Metal Blades Third Edition
Household Sewing Machines - Numerical Classification First Edition
Mopeds - Measurement of Maximum Speed Second Edition
Motorcycles - Measurement of Maximum Speed Second Edition
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Screw Conveyors - Design Rules for Drive Power First Edition
Petroleum Products and Lubricants - Petroleum Oils and Other Fluids - Determination of Rust-Preventing Characteristics in the
Presence of Water First Edition
Steel ball valves for general-purpose industrial applications Second Edition
Earth-Moving Machinery - Cutting Edges Used on Tractor-Dozers, Graders and Scapers - Principal Shapes and Basic Dimensions
Third Edition
Earth-Moving Machinery - Guide to Procedure for Operator Training First Edition
Earth-moving machinery - Loaders - Terminology and commercial specifications Second Edition; Amendment 1: 05/01/2003
Earth-moving machinery Dumpers Terminology and commercial specifications Third Edition
Earth-Moving Machinery - Tractor-Scrapers - Terminology and Commercial Specifications Second Edition
Earth-Moving Machinery - Graders - Terminology and Commercial Specifications Second Edition; Corrigendum 1: 1996
Earth-Moving Machinery - Hydraulic Excavators - Terminology and Commercial Specifications First Edition
Earth-moving machinery Pipelayers Terminology and commercial specifications Third Edition
Aircraft - Environmental Conditions and Test Procedures for Airborne Equipment Fourth Edition
Cross-Country Skis - Determination of Mass and Location of Balance Point First Edition
Cross-Country Skis - Determination of Elastic Properties First Edition
Cross-Country Skis - Determination of Dynamic Performance - Laboratory Measurement Method First Edition
ISO
ISO
ISO
ISO
ISO
7141
7142
7143
7144
7146
ISO
7148-1
ISO
ISO
ISO
ISO
7148-2
7149
7150-1
7151
ISO
ISO
ISO
ISO
ISO
7152
7153-1
7154
7156
7162
ISO
ISO
ISO
ISO
7165
7166
7168-1
7168-2
ISO
ISO
ISO
ISO
ISO
ISO
7169
7170
7171
7172
7173
7174-1
ISO
ISO
ISO
ISO
ISO
7174-2
7175-1
7175-2
7176-1
7176-2
Passenger vehicles - Light alloy wheels - Impact test Third Edition
Binders for paints and varnishes ù Epoxy resins ù General methods of test Second edition
Binders for paints and varnishes ù Methods of test for characterizing waterbased binders Third edition
Documentation - Presentation of Theses and Similar Documents First Edition
Plain Bearings - Terms, Characteristics and Causes of Damage and Changes in Appearance First Edition
Plain Bearings - Testing of the Tribological Behaviour of Bearing Materials - Part 1: Testing of Bearing Metals Second Edition
Plain Bearings - Testing of the Tribological Behaviour of Bearing Materials - Part 2: Testing of Polymer-Based Bearing Materials First
Edition
Continuous Handling Equipment - Safety Code - Special Rules First Edition
Water Quality - Determination of Ammonium - Part 1: Manual Spectrometric Method First Edition
Surgical Instruments - Non-Cutting, Articulated Instruments - General Requirements and Test Methods Second Edition
Camping Tents and Caravan Awnings - Vocabulary and List of Equivalent Terms Tentes de camping et auvents de caravane Vocabularie et liste de termes equivalents Second Edition; Amendment: 04/01/2006
Surgical Instruments - Metallic Materials - Part 1: Stainless Steel Second Edition; Amendment 1: 03-01-1999
Documentation - Bibliographic Filing Principles First Edition
Refined Nickel - Sampling First Edition
Performance Standards in Building - Contents and Format of Standards for Evaluation of Performance First Edition
Fire Fighting - Portable Fire Extinguishers - Performance and Construction First Edition; Amendment 1: 05/01/2004; Amendment 2:
05/01/2004
Aircraft - Rail and Stud Configuration for Passenger Equipment and Cargo Restraint First Edition
Air Quality - Exchange of Data - Part 1: Gneral Data Format First Edition
Air Quality - Exchange of Data - Part 2: Condensed Data Format First Edition
Aerospace ù Separable tube fittings for fluid systems, for 24 cones, for pressures up to 3 000 psi or 21 000 kPa ù Procurement
specification, inch/metric Fourth Edition
Furniture Storage units Determination of strength and durability Second Edition
Furniture - Storage Units - Determination of Stability First Edition
Furniture - Tables - Determination of Stability First Edition
Furniture - Chairs and Stools - Determination of Strength and Durability First Edition
Furniture - Chairs - Determination of Stability Part 1: Upright Chairs and Stools First Edition
Furniture - Chairs - Determination of Stability - Part 2: Chairs with Tilting or Reclining Mechanisms When Fully Reclined, and Rocking
Chairs First Edition
Children s Cots and Folding Cots for Domestic Use - Part 1: Safety Requirements First Edition
Children s Cots and Folding Cots for Domestic Use - Part 2: Test Methods Second Edition
Wheelchairs - Part 1: Determination of Static Stability Second Edition
Wheelchairs - Part 2: Determination of Dynamic Stability of Electric Wheelchairs Second Edition
ISO
7176-3
Wheelchairs - Part 3: Determination of Effectiveness of Brakes Second Edition
Wheelchairs Part 4: Energy Consumption of Electric Wheelchairs and Scooters for Determination of Theoretical Distance Range
Second Edition
Wheelchairs - Part 5: Determination of Overall Dimensions, Mass and Turning Space First Edition
ISO
ISO
7176-4
7176-5
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7176-6
7176-7
7176-8
7176-9
7176-10
7176-11
7176-13
7176-14
7176-15
7176-16
7176-19
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7176-21
7176-22
7176-23
7176-24
7176-26
7180
7181
7183
7183-2
Wheelchairs - Part 6: Determination of Maximum Speed, Acceleration and Retardation of Electric Wheelchairs Second Edition
Wheelchairs - Part 7: Measurement of Seating and Wheel Dimensions First Edition
Wheelchairs - Part 8: Requirements and Test Methods for Static, Impact and Fatigue Strengths First Edition
Wheelchairs - Part 9: Climatic Tests for Electric Wheelchairs Second Edition
Wheelchairs - Part 10: Determination of Obstacle-Climbing Ability of Electric Wheelchairs First Edition
Wheelchairs - Part 11: Test Dummies First Edition; (CSA CAN/CSA-Z323.4.8- 94)
Wheelchairs - Part 13: Determination of Coefficient of Friction of Test Surfaces First Edition; (CSA CAN/CSA-Z323.4.9- 94)
Wheelchairs - Part 14: Power and Control Systems for Electric Wheelchairs - Requirements and Test Methods First Edition
Wheelchairs - Part 15: Requirements for Information Disclosure, Documentation and Labelling First Edition
Wheelchairs - Part 16: Resistance to Ignition of Upholstered Parts - Requirements and Test Methods First Edition
Wheelchairs - Part 19: Wheeled Mobility Devices for Use in Motor Vehicles First Edition
Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and
motorized scooters First Edition [Superseded By: GOST R 52583]
Wheelchair - Part 22: Set-Up Procedures First Edition
Wheelchairs - Part 23: Requirements and Test Methods for Attendant-Operated Stair-Climbing Devices First Edition
Wheelchairs - Part 24: Requirements and test methods for useroperated stair-climbing devices First Edition
Wheelchairs ù Part 26: Vocabulary First edition [Superseded: ISO 6440]
Pneumatic Fluid Power - Cylinders - Bore and Port Thread Sizes First Edition
Hydraulic Fluid Power - Cylinders - Bore and Rod Area Ratios Second Edition
Compressed Air Dryers - Specifications and Testing First Edition
Compressed Air Dryers - Part 2: Performance Ratings First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7185
7186
7187
7189
7190
7193
7195
7196
7197 CORR 1
Information Technology - Programming Languages - Pascal Second Edition; CEN EN 27185: 1992; CAN/CSA-ISO/IEC 7185-95
Ductile Iron Products for Sewage Applications Second Edition
Photography - Materials for Direct-Positive Colour-Print Cameras - Determination of ISO Speed Second Edition
Continuous Mechanical Handling Equipment - Apron Conveyors - Design Rules First Edition
Continuous Mechanical Handling Equipment - Bucket Elevators - Classification First Edition
Wheelchairs - Maximum Overall Dimensions First Edition
Nuclear energy - Packaging of uranium hexafluoride (UF6) for transport Second Edition
Acoustics - Frequency-Weighting Characteristic for Infrasound Measurements First Edition
Neurosurgical Implants - Sterile, Single-Use Hydrocephalus Shunts and Components Third Edition
ISO
ISO
ISO
ISO
7197
7198
7199
7200
ISO
7201-1
ISO
ISO
7201-2
7202
ISO
7203-1
ISO
7203-2
ISO
ISO
7203-3
7205
ISO
7206-1
ISO
7206-2
ISO
7206-4
ISO
7206-6
ISO
7206-8
ISO
7206-10
ISO
7207-1
ISO
7207-2
ISO
ISO
7208
7210
Neurosurgical Implants - Sterile, Single-Use Hydrocephalus Shunts and Components Third Edition
Cardiovascular Implants - Tubular Vascular Prostheses First Edition
Cardiovascular Implants and Artificial Organs - Blood-Gas Exchangers (Oxygenators) First Edition
Technical product documentation Data fields in title blocks and document headers Second Edition
Fire Protection - Fire Extinguishing Media - Halogenated Hydrocarbons - Part 1: Specifications for Halon 1211 and Halon 1301
Second Edition; (CEN EN 27201-1: 1994)
Fire Extinguishing Media - Halogenated Hydrocarbons - Part 2: Code of Practice for Safe Handling and Transfer Procedures of Halon
1211 and Halon 1301 First Edition; (CEN EN 27201-2: 1994)
Fire Protection - Fire Extinguishing Media - Powder First Edition; (Corrected and Reprinted - 1988)
Fire Extinguishing Media - Foam Concentrates - Part 1: Specification for Low Expansion Foam Concentrates for Top Application to
Water-Immiscible Liquids First Edition
Fire Extinguishing Media - Foam Concentrates - Part 2: Specification for Medium and High Expansion Foam Concentrates for Top
Application to Water-Immiscible Liquids First Edition
Fire Extinguishing Media - Foam Concentrates - Part 3: Specification for Low Expansion Foam Concentrates for Top Application to
Water-Miscible Liquids Second Edition
Radionuclide Gauges - Gauges Designed for Permanent Installation First Edition
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 1: Classification and Designation of Dimensions Second Edition
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 2: Articulating Surfaces Made of Metallic, Ceramic and Plastics
Materials Second Edition; (CAN/CSA-Z310.14-M92)
Implants for surgery Partial and total hip joint prostheses Part 4: Determination of endurance properties of stemmed femoral
components Second Edition
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 6: Determination of Endurance Properties of Head and Neck
Region of Stemmed Femoral Components First Edition
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 8: Endurance Performance of Stemmed Femoral Components
with Application of Torsion First Edition
Implants for surgery Partial and total hip-joint prostheses Part 10: Determination of resistance to static load of modular femoral
heads First Edition
Implants for surgery ù Components for partial and total knee joint prostheses ù Part 1: Classification, definitions and designation of
dimensions Third Edition
Implants for Surgery - Components for Partial and Total Knee-Joint Prostheses - Part 2: Articulating Surfaces Made of Metal, Ceramic
and Plastics Materials First Edition
Skimmed Milk, Whey and Buttermilk - Determination of Fat Content - Gravimetric Method (Reference Method) Second Edition
Routine Analytical Cigarette-Smoking Machine - Additional Test Methods
Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1: Methods for the Presentation of a Weave Diagram and Plans
for Drafting, Denting and Lifting First Edition
Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 2: Determination of Number of Threads per Unit Length First
Edition; (CEN EN 1049-2:1993)
ISO
7211-1
ISO
7211-2
ISO
7211-3
ISO
7211-4
ISO
7211-5
ISO
ISO
ISO
ISO
ISO
7211-6
7212
7213
7214
7215
ISO
7216
Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 3: Determination of Crimp of Yarn in Fabric First Edition
Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 4: Determination of Twist in Yarn Removed from Fabric First
Edition
Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 5: Determination of Linear Density of Yarn Removed from Fabric
First Edition
Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 6: Determination of the Mass of Warp and Weft per Unit Area of
Fabric First Edition; (PNS 498: 1992)
Enclosures for Protection Against Ionizing Radiation - Lead Shielding Units for 50 mm and 100 mm Thick Walls First Edition
Pulps - Sampling for Testing First Edition; (CEN EN 27213: 1993)
Cellular Plastics - Polyethylene - Methods of Test Third Edition
Iron Ores - Determination of Relative Reducibility Second Edition
Acoustics - Agricultural and Forestry Wheeled Tractors and Self-Propelled Machines - Measurement of Noise Emitted When in
Motion First Edition
ISO
ISO
7218
7220
Microbiology of food and animal feeding stuffs ù General requirements and guidance for microbiological examinations Third Edition
Information and Documentation - Presentation of Catalogues of Standards First Edition; Corrigendum 1 11/15/2001
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7221
7222
7224
7225
7226
7227
7229
7231
7233
ISO
ISO
7235
7236
ISO
7237
Shipbuilding and Marine Structures - Shipborne Barges, Series 1, on Barge Carriers - Principal Technical Requirements First Edition
Shipbuilding - Shipborne Barges, Series 2 - Main Dimensions First Edition
Equipment for Vine Cultivation and Wine Making - Mash Pumps - Methods of Test First Edition
Gas cylinders - Precautionary labels Second Edition
Hexagonal Dienuts Second Edition
Road vehicles Lighting and light signalling devices Vocabulary First Edition: Amendment 1: 9/1/2004
Rubber- or Plastics-Coated Fabrics - Measurement of Gas Permeability First Edition
Polymeric Materials, Cellular Flexible - Method of Assessment of Air Flow Value at Constant Pressure-Drop First Edition
Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum Third edition
Acoustics Laboratory measurement procedures for ducted silencers and air-terminal units Insertion loss, flow noise and total
pressure loss Second Edition
Inland Navigation Vessels - Demountable Signal Masts for Push-Tows - Mounting Attachment First Edition
Caravans - Masses and Dimensions - Vocabulary Caravanes - Masses Et Dimensions - Vocabulaire Second Edition; Amendment 1:
09/01/2001
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7238
7240-1
7240-2
7240-4
7240-5 CORR 1
7240-5
7240-6
Butter - Determination of pH of the Serum - Potentiometric Method Second Edition
Fire detection and alarm systems Part 1: General and definitions Second Edition
Fire detection and alarm systems Part 2: Control and indicating equipment First Edition
Fire detection and alarm systems Part 4: Power supply equipment First Edition
Fire detection and alarm systems ù Part 5: Point-type heat detectors TECHNICAL CORRIGENDUM 1 First Edition
Fire detection and alarm systems ù Part 5: Point-type heat detectors First Edition
Fire detection and alarm systems Part 6: Carbon monoxide fire detectors using electro-chemical cells First Edition
ISO
7240-7
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7240-8
7240-10
7240-11
7240-12
7240-13
7240-15 CORR 1
7240-15
ISO
7240-16
ISO
ISO
ISO
ISO
ISO
7240-19
7240-21
7240-22
7241-1
7241-2
ISO
ISO
7243
7244
Fire detection and alarm systems Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization First Edition
Fire detection and alarm systems ù Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat
sensor First Edition
Fire detection and alarm systems ù Part 10: Point-type flame detectors First Edition
Fire detection and alarm systems Part 11: Manual call points First Edition
Fire detection and alarm systems Part 12: Line type smoke detectors using a transmitted optical beam First Edition
Fire detection and alarm systems Part 13: Compatibility assessment of system components First Edition
Fire detection and alarm systems ù Part 15: Multisensor fire detectors TECHNICAL CORRIGENDUM 1 First Edition
Fire detection and alarm systems ù Part 15: Multisensor fire detectors First Edition
Fire detection and alarm systems ù Part 16: Sound system control and indicating equipment First Edition [Cancelled: IEC 60849, IEC
60849]
Fire detection and alarm systems ù Part 19: Design, installation, commissioning and service of sound systems for emergency
purposes First Edition [Replaced: IEC 60849, IEC 60849]
Fire detection and alarm systems - Part 21: Routing equipment First Edition
Fire detection and alarm systems ù Part 22: Smoke-detection equipment for ducts First Edition
Hydraulic Fluid Power - Quick-Action Couplings - Part 1: Dimensions and Requirements First Edition
Hydraulic Fluid Power - Quick-Action Couplings - Part 2: Test Methods Second Edition
Hot Environments - Estimation of the Heat Stress on Working Man, Based on the WBGT-Index (Wet Bulb Globe Temperature)
Second Edition; (CEN EN 27243: 1993) (NZS/ISO 7243: 1989)
Air Distribution and Air Diffusion - Aerodynamic Testing of Dampers and Valves First Edition
ISO
7245
Pipes and Fittings of Acrylonitrile-Butadiene-Styrene (ABS) - General Specification for Moulding and Extrusion Materials First Edition
ISO
ISO
7246
7250
Pipes and Fittings of Acrylonitrile/Styrene/ Acrylester (ASA) - General Specification for Moulding and Extrusion Materials First Edition
Basic Human Body Measurements for Technological Design First Edition
ISO
7251
Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of presumptive Escherichia coli
Most probable number technique Third edition; Cancels and replaces ISO 11866-1:1997 and IDF 170-1:1999.
ISO
ISO
ISO
ISO
ISO
7252
7255
7256-1
7256-2
7257
ISO
ISO
7258
7259
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7263
7266
7267-1
7267-2
7267-3
7268
7269
ISO
7270-1
ISO
ISO
7270-2
7271
ISO
ISO
7274
7275
ISO
7278-1
ISO
7278-2
ISO
7278-3
ISO
7278-4
ISO
7279
ISO
7284
Paints and Varnishes - Determination of Total Mercury - Flameless Atomic Absorption Spectrometric Method First Edition
Shipbuilding - Active Control Units of Ships - Vocabulary First Edition
Sowing Equipment - Test Methods - Part 1: Single Seed Drills (Precision Drills) First Edition
Sowing Equipment - Test Methods - Part 2: Seed Drills for Sowing in Lines First Edition
Aircraft - Hydraulic Tubing Joints and Fittings - Rotary Flexure Test First Edition
Polytetrafluoroethylene (PTFE) Tubing for Aerospace Applications - Methods for the Determination of the Density and Relative
Density First Edition
Predominantly Key-Operated Cast Iron Gate Valves for Underground Use First Edition
Corrugating Medium - Determination of the Flat Crush Resistance After Laboratory Fluting Second Edition; (CEN EN ISO 7263: 1995)
Copper and Copper Alloys - Determination of Sulfur Content - Combustion Titrimetric Method First Edition
Rubber-Covered Rollers - Determination of Apparent Hardness - Part 1: IRHD Method Second Edition
Rubber-Covered Rollers - Determination of Apparent Hardness - Part 2: Shore-Type Durometer Method First Edition
Rubber-covered rollers - Determination of apparent hardness - Part 3: Pusey and Jones method Second Edition
Pipe Components - Definition of Nominal Pressure First Edition; Amendment 1: 1984
Rubber - Determination of Free Sulfur Second Edition Corrigendum 1 5/15/2002
Rubber - Analysis by Pyrolytic Gas-Chromatographic Methods - Part 1: Identification of Polymers (Single Polymers and Polymer
Blends) First Edition
Rubber Analysis by pyrolytic gas-chromatographic methods Part 2: Determination of styrene/butadiene/isoprene ratio First Edition
Aluminium and Aluminium Alloys - Foil and Thin Strip - Dimensional Tolerances First Edition
Wrought Aluminium and Aluminium Alloys - Drawn Round Bars - Tolerances on Shape and Dimensions (All Minus Tolerances on
Diameter) First Edition
Documentation - Presentation of Title Information of Series First Edition
Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 1: General Principles First Edition;
(CEN EN ISO 7278-1: 1995)
Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 2: Pipe Provers First Edition; (CEN EN
ISO 7278-2: 1995)
Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 3: Pulse Interpolation Techniques
Second Edition
Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 4: Guide for Operators of Pipe Provers
First Edition
Polypropylene (PP) Fittings for Pipes Under Pressure - Sockets for Fusion Using Heated Tools - Metric Series - Dimensions of
Sockets First Edition
Resistance Welding Equipment - Particular Specifications Applicable to Transformers with Two Separate Secondary Windings for
Multi-Spot Welding, as Used in the Automobile Industry Second Edition CEN EN ISO 7284: 1996
ISO
ISO
ISO
ISO
7285
7286
7287
7289
Pneumatic Cylinders for Mechanized Multiple Spot Welding First Edition
Graphical Symbols for Resistance Welding Equipment First Edition
Graphical Symbols for Thermal Cutting Equipment Symboles Graphiques Pour Equipments de Coupage Thermique
Quick-Action Couplings with Shut-Off Valves for Gas Welding, Cutting and Allied Processes Second Edition
Gas Welding Equipment - Pressure Regulators for Manifold Systems Used in Welding, Cutting and Allied Processes up to 300 Bar
Second Edition
ISO
7291
ISO
ISO
ISO
ISO
7292
7293
7294
7295
ISO
ISO
7296-1
7296-2
ISO
7296-3
ISO
7297
ISO
ISO
ISO
ISO
7298
7299-1
7301
7302
ISO
ISO
ISO
ISO
7304
7305
7308
7309
Durum Wheat Semolinas and Alimentary Pasta - Estimation of Cooking Quality of Spaghetti by Sensory Analysis First Edition
Milled Cereal Products - Determination of Fat Acidity Second Edition
Road Vehicles - Petroleum-Based Brake-Fluid for Stored-Energy Hydraulic Brakes First Edition
Road Vehicles - Hydraulic Braking Systems - ISO Reference Petroleum Base Fluid First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7310
7311
7313
7314
7315
7319
7320
Diesel Engines - Heads for Spin-On Fuel Filters with Horizontal Flange - Mounting and Connecting Dimensions Second Edition
Diesel Engines - Heads for Fuel Filters with Vertical Flange - Mounting and Connecting Dimensions Second Edition
Aircraft - High Temperature Convoluted Hose Assemblies in Polytetrafluoroethylene (PTFE) First Edition
Aerospace - Fluid Systems - Metal Hose Assemblies Third Edition
Aerospace -P" Clamps (Loop Clamps) for Fluid Systems - Envelope Dimensions Second Edition"
Aerospace - Fluid Systems - Interface of 24 Degree Cone Metric Couplings Second Edition
Aerospace - Couplings, Threaded and Sealed, for Fluid Systems - Dimensions Second Edition
Flowmeter Regulators used on Cylinders for Welding, Cutting and Allied Processes - Classification and Specifications First Edition
Forestry Machinery - Portable Chain-Saws - Engine Performance and Fuel Consumption Second Edition
Saw Teeth for Woodworking Saws - Profile Shape - Terminology and Designation First Edition
Tyre Valves for Aircraft - Interchangeability Dimensions Second Edition
Cranes - Graphic Symbols - Part 1: General Appareils De Levage A Charge Suspendue - Symboles Graphiques - Partie 1:
Generalites First Edition; Amendment 1 12-15-1996
Cranes - Graphical Symbols - Part 2: Mobile Cranes First Edition
Cranes Graphical symbols Part 3: Tower cranes Appareils de levage Ó charge suspendue Symboles graphiques Partie 3: Grues Ó
tour First Edition
Information Processing - Magnetic Disk for Data Storage Devices - 96 000 Flux Transitions per Track, 200 mm (7.9 in) Outer
Diameter, 63,5 mm (2.5 in) Inner Diameter First Edition
Information Processing - Magnetic Disk for Data Storage Devices - 158 000 Flux Transitions per Track, 210 mm (8.3 in) Outer
Diameter, 100 mm (3.9 in) Inner Diameter First Edition
Diesel engines ù End-mounting flanges for pumps ù Part 1: Fuel injection pumps First Edition [Superseded: ISO 7299]
Rice - Specification Second Edition
Cereals and Cereal Products - Determination of Total Fat Content First Edition
ISO
7322
ISO
ISO
ISO
7323
7326
7327
ISO
ISO
7328
7331
ISO
ISO
ISO
7332
7335
7341
ISO
ISO
7343
7345
ISO
7346-1
ISO
7346-2
ISO
ISO
ISO
ISO
ISO
7346-3
7347
7348
7349
7350
ISO
7355
ISO
7356
ISO
7357
ISO
ISO
7358
7359
Composition Cork - Test Methods Second Edition
Rubber, raw and unvulcanized compounded Determination of plasticity number and recovery number Parallel-plate method Second
Edition
Rubber and plastics hoses Assessment of ozone resistance under static conditions Third Edition
Plastics - Hardeners and Accelerators for Epoxide Resins - Determination of Free Acid in Acid Anhydride First Edition
Milk-Based Edible Ices and Ice Mixes - Determination of Fat Content - Gravimetric Method (Reference Method) Second Edition
Ski-poles for alpine skiing - Requirements and test methods Third Edition
Aerospace - Nuts, Anchor, Self-Locking, Floating, Two Lug, Reduced Series, with Counterbore, with MJ Threads, ClassificationS: 1
100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa
(at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition
Iron Ores - Determination of Combined Water Content - Karl Fischer Titrimetric Method First Edition
Banking - Nostro Accounts Reconciliation Third edition
Cinematography - Two-Track Photographic Sound Records on 35 mm Motion-Picture Prints - Positions and Width Dimensions
Second Edition
Thermal Insulation - Physical Quantities and Definitions Second Edition; (CEN EN ISO 7345: 1995)
Water Quality - Determination of the Acute Lethal Toxicity of Substances to a Freshwater Fish (Brachydanio Rerio HamiltonBuchanan (Teleostei, Cyprinidae)) - Part 1: Static Method Second Edition
Water Quality - Determination of the Acute Lethal Toxicity of Substances to a Freshwater Fish (Brachydanio Rerio HamiltonBuchanan (Teleostei, Cyprinidae)) - Part 2: Semi-Static Method Second Edition
Water Quality - Determination of the Acute Lethal Toxicity of Substances to a Freshwater Fish (Brachydanio Rerio HamiltonBuchanan (Teleostei, Cyprinidae)) - Part 3: Flow-Through Method Second Edition
Ferroalloys - Experimental Methods for Checking the Bias of Sampling and Sample Preparation First Edition
Glass Containers - Manufacture - Vocabulary First Edition
Thermoplastics Valves - Connection References First Edition
Information Technology - Registration of Repertoires of Graphic Characters from ISO/IEC 10367 Second Edition
Oils of Sassafras and Nutmeg - Determination of Safrole and cis- and trans-isosafrole Content - Gas Chromatographic Method on
Packed Columns First Edition
Oil of Thujone-Containing Artemisia and Oil of Sage (Salvia Officinalis Linnaeus) - Determination of Alpha Particle and Beta RayThujone Content - Gas Chromatographic Method on Packed Columns First Edition
Oil of Calamus - Determination of cis-Beta Ray-Asarone Content - Gas Chromatographic Method on Packed Columns First Edition
Oils of bergamot, lemon, citron and lime,fully or partially reduced in bergapten Determination of bergapten content by high-pressure
liquid chromatography (HPLC) First edition
Essential Oils - Analysis by Gas Chromatography on Packed Columns - General Method First Edition
ISO
ISO
ISO
ISO
ISO
ISO
7361
7363
7364
7365
7366
7368
ISO
7369
ISO
ISO
7370
7372
ISO
7373
ISO
7375-1
ISO
7375-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7376
7377
7378
7379
7380
7382
7384
7385
7386
7387-1
ISO
7388-1
ISO
7388-2
ISO
ISO
7388-3
7389
Performance Standards in Building - Presentation of Performance Levels of Facades Made of Same-Source Components First
Edition
Cranes and Lifting Appliances - Technical Characteristics and Acceptance Documents First Edition
Shipbuilding and Marine Structures - Deck Machinery - Accommodation Ladder Winches First Edition
Shipbuilding and Marine Structures - Deck Machinery - Towing Winches for Deep Sea Use First Edition
Animal and Vegetable Fats and Oils - Determination of 1-Monoglycerides and Free Glycerol Contents First Edition
Hydraulic Fluid Power - Two-Port Slip-In Cartridge Valves - Cavities First Edition Supersedes NFPA/Fluid T3.5.45
Pipework - Flexible Metallic Hoses - Vocabulary of General Terms Tuyauteries Tuyaux et tuyauteries mÚtalliques flexibles
Vocabulaire Third Edition
Glass Fibre Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Nominal Diameters, Specified Diameters and Standard
Lengths First Edition
Trade data interchange Trade data elements directory Third edition
Ferroalloys - Experimental Methods for Checking the Precision of Sample Division First Edition; (Corrected and Reprinted - 1988)
Road Vehicles - Coiled Pipe Assemblies for Pneumatic Braking Connection Between Motor Vehicles and Towed Vehicles - Part 1:
Dimensions Second Edition
Road Vehicles - Coiled Tube Assemblies for Air Brake Connection between Towing and Towed Vehicles - Part 2: Perfomance
Requirements First Edition
Anaesthetic and respiratory equipment Laryngoscopes for tracheal intubation First Edition; Cancels and Replaces ISO 7376-1:1994,
ISO 7376-2:1997 and ISO 7376-3:1996
Juniper Berries (Juniperus Communis Linnaeus) - Specification First Edition
Fasteners - Bolts, Screws and Studs - Split Pin Holes and Wire Holes First Edition
Hexagon Socket Head Shoulder Screws First Edition
Hexagon Socket Button Head Screws Third Edition
Ethylene for Industrial Use - Sampling in the Liquid and the Gaseous Phase First Edition
Corrosion Tests in Artificial Atmosphere - General Requirements First Edition; (CEN EN ISO 7384: 1995)
Nuclear Power Plants - Guidelines to Ensure Quality of Collected Data on Reliability First Edition
Aniseed (Pimpinella Anisum Linnaeus) - Specification First Edition
Adhesives with Solvents for Assembly of u PVC Pipe Elements - Characterization - Part 1: Basic Test Methods First Edition
Tool shanks with 7/24 taper for automatic tool changers ù Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD
and UF Second Edition
Tool shanks with 7/24 taper for automatic tool changers ù Part 2: Dimensions and designation of shanks of forms J, JD and JF
Second Edition
Tool shanks with 7/24 taper for automatic tool changers ù Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD
and JF First Edition
Building Construction - Jointing Products - Determination of Elastic Recovery of Sealants Third Edition
ISO
7390
Building Construction - Jointing Products - Determination of Resistance to Flow Sealants Third Edition
ISO
7391-1
ISO
7391-2
ISO
7393-1
ISO
7393-2
ISO
ISO
ISO
ISO
7393-3
7396
7396-1
7396-2
Plastics Polycarbonate (PC) moulding and extrusion materials Part 1: Designation system and basis for specifications Third Edition
Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
Third Edition
Water Quality - Determination of Free Chlorine and Total Chlorine - Part 1: Titrimetric Method Using N,N-Diethyl-1,4Phenylenediamine First Edition; Corrigendum 1: 03-15-2001
Water Quality - Determination of Free Chlorine and Total Chlorine - Part 2: Colorimetric Method Using N,N-Diethyl-1,4Phenylenediamine, for Routine Control Purposes First Edition
Water Quality - Determination of Free Chlorine and Total Chlorine - Part 3: Iodometric Titration Method for the Determination of Total
Chlorine Second Edition
Non-Flammable Medical Gas Pipeline Systems First Edition
Medical gas pipeline systems ù Part 1: Pipeline systems for compressed medical gases and vacuum Second Edition
Medical gas pipeline systems ù Part 2: Anaesthetic gas scavenging disposal systems Second edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7397-1
7397-2
7398
7399
7400
7401
7403
7404-1
Passenger Cars - Verification of Driver s Direct Field of View - Part 1: Vehicle Positioning for Static Measurement First Edition
Passenger Cars - Verification of Driver s Direct Field of View - Part 2: Test Method First Edition
Motorcycles - Direct Current Flasher Units Second Edition
Motorcycles - Alternating Current Flasher Units Second Edition
Mopeds - Alternating Current Flasher Units Second Edition
Road Vehicles - Lateral Transient Response Test Methods - Open-Loop Test Methods Second Edition
Aerospace - Spline Drive - Wrenching Configuration - Metric Series Second Edition
Methods for the Petrographic Analysis of Bituminous Coal and Anthracite - Part 1: Vocabulary Second Edition
ISO
7404-2
ISO
7404-3
ISO
7404-4
ISO
7404-5
ISO
ISO
7405
7407
ISO
7408
Methods for the Petrographic Analysis of Bituminous Coal and Anthracite - Part 2: Method of Preparing Coal Samples First Edition
Methods for the Petrographic Analysis of Bituminous Coal and Anthracite - Part 3: Method of Determining Maceral Group
Composition Second Edition
Methods for the Petrographic Analysis of Bituminous Coal and Anthracite - Part 4: Method of Determining Microlithotype,
Carbominerite and Minerite Composition First Edition
Methods for the Petrographic Analysis of Bituminous Coal and Anthracite - Part 5: Method of Determining Microscopically the
Reflectance of Vitrinite Second Edition
Dentistry - Preclinical Evaluation of Biocompatability of Medical Devices Used in Dentistry - Test Methods for Dental Materials First
Edition; Replaces ISO TR 7405
Fertilizers - Determination of Acid-Soluble Potassium Content - Preparation of the Test Solution First Edition
Fertilizers - Determination of Ammoniacal Nitrogen Content in the Presence of Other Substances Which Release Ammonia When
Treated with Sodium Hydroxide - Titrimetric Method First Edition
ISO
ISO
7409
7410
ISO
7411
ISO
7412
ISO
7413
ISO
ISO
ISO
7414
7415
7416
ISO
7417
ISO
7425-1
ISO
7425-2
ISO
ISO
ISO
ISO
7432
7434
7435
7436
ISO
ISO
ISO
ISO
ISO
7437
7438
7439
7440-1
7440-2
ISO
7441
ISO
ISO
ISO
ISO
7451
7452
7457
7458
Fertilizers - Marking - Presentation and Declarations First Edition
Fertilizers and Soil Conditioners - Final Samples - Practical Arrangements First Edition
Hexagon Bolts for High-Strength Structural Bolting with Large Width Across Flats (Thread Lengths According to ISO 888) - Product
Grade C - Property Classes 8.8 and 10.9 First Edition
Hexagon Bolts for High-Strength Structural Bolting with Large Width Across Flats (Short Thread Length) - Product Grade C - Property
Classes 8.8 and 10.9 First Edition
Hexagon Nuts for Structural Bolting, Style 1, Hot-Dip Galvanized (Oversize Tapped) - Product Grades A and B - Property Classes 5,
6 and 8 First Edition
Hexagon Nuts for Structural Bolting with Large Width Across Flats, Style 1 - Product Grade B - Property Class 10 First Edition
Plain Washers for High-Strength Structural Bolting, Hardened and Tempered First Edition
Plain Washers, Chamfered, Hardened and Tempered for High-Strength Structural Bolting First Edition
Hexagon Nuts for Structural Bolting - Style 2, Hot-Dip Galvanized (Oversize Tapped) - Product Grade A - Property Class 9 First
Edition
Hydraulic Fluid Power - Housings for Elastomer-Energized, Plastic-Faced Seals - Dimensions and Tolerances - Part 1: Piston Seal
Housings First Edition
Hydraulic Fluid Power - Housings for Elastomer-Energized, Plastic-Faced Seals - Dimensions and Tolerances - Part 2: Rod Seal
Housings First Edition
Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings Test Methods to Prove the Design of Locked Socket-and-Spigot
Joints, Including Double-Socket Joints, with Elastomeric Seals First Edition
Slotted Set Screws with Cone Point First Edition; (NZS/ISO 7434: 1983)
Slotted Set Screws with Long Dog Point First Edition; (NZS/ISO 7435: 1983)
Slotted Set Screws with Cup Point First Edition; (NZS/ISO 7436: 1983)
Technical Drawings - Construction Drawings - General Rules for Execution of Production Drawings for Prefabricated Structural
Components First Edition; (CEN EN ISO 7437: 1996)
Metallic materials - Bend test Second Edition
Copper-Bearing Intra-Uterine Contraceptive Devices - Requirements, Tests Second Edition; Replaces ISO TR 7439
Road Vehicles - Fuel Injection Equipment Testing - Part 1: Calibrating Nozzle and Holder Assemblies Second Edition
Road Vehicles - Fuel Injection Equipment Testing - Part 2: Orifice Plate Flow-Measurement Second Edition
Corrosion of Metals and Alloys - Determination of Bimetallic Corrosion in Outdoor Exposure Corrosion Tests First Edition; (CEN EN
ISO 7441: 1995)
Earth-moving machinery - Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders Third
edition
Hot-Rolled Structural Steel Plates - Tolerances on Dimensions and Shape Second Edition
Earth-Moving Machinery - Determination of Turning Dimensions of Wheeled Machines Second Edition
Glass Containers - Internal Pressure Resistance - Test Methods Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7459
7460
7461
7462
7464
7465
7466
ISO
7476
ISO
7478
ISO
7480
ISO
ISO
ISO
ISO
ISO
7481
7482-1
7482-2
7482-3
7483
ISO
7485
ISO
7487-1
Glass Containers - Thermal Shock Resistance and Thermal Shock Endurance - Test Methods Second Edition
Shipbuilding - Shiplines - Identification of Geometric Data First Edition
Shipbuilding - Shiplines - Numerical Representation of Elements of the Hull Geometry First Edition
Shipbuilding - Principal Ship Dimensions - Terminology and Definitions for Computer Applications First Edition
Earth-Moving Machinery - Method of Test for the Measurement of Drawbar Pull First Edition
Passenger Lifts and Service Lifts - Guide Rails for Lift Cars and Counterweights - T-Type Third Edition
Fruit and Vegetable Products - Determination of 5-Hydroxymethylfurfural (5-HMF) Content First Edition
Nuclear fuel technology Determination of uranium in uranyl nitrate solutions of nuclear grade quality Gravimetric method Second
Edition
Information Processing Systems - Data Communication - Multilink Procedures First Edition; Corrigendum 1-1989; NZS/ISO 7478:
1987
Information Technology - Telecommunications and Information Exchange between Systems - Start-Stop Transmission Signal Quality
at DTE/DCE Interfaces Second Edition; AS/NZS 3618: 1993; CAN/CSA-ISO/IEC 7480-95
Aerospace - Nuts, Self-Locking, with Maximum Operating Temperature Less Than or Equal to 425 Degrees Celsius - Test Methods
Second Edition
Raw Goat Skins - Part 1: Descriptions of Defects First Edition
Raw Goat Skins - Part 2: Guidelines for Grading on the Basis of Mass and Size First Edition
Raw goat skins Part 3: Guidelines for grading on the basis of defects First Edition
Dimensions of Gaskets for Use with Flanges to ISO 7005 First Edition; Corrigendum 1: 1995
Animal Feeding Stuffs - Determination of Potassium and Sodium Contents - Methods Using Flame-Emission Spectrometry First
Edition
Information Technology - Data Interchange on 130 mm (5,25 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on Both Sides - ISO Type 202 - Part 1: Dimensional, Physical and Magnetic
Characteristics Second Edition; CAN/CGSB-186.78-93
ISO
7487-2
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on Both Sides - Part 2: Track Format A First Edition; CAN/CGSB-186.8-93
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7487-3
7488
7491
7492
7493
7494-1
7494-2
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on Both Sides - Part 3: Track Format B Second Edition; Corrigendum 1-1991
Dental Amalgamators First Edition; (CEN EN ISO 7488: 1995) (CAN/CSA-Z349.52-94)
Dental Materials - Determination of Colour Stability Second Edition
Dental Explorers Second Edition
Dentistry Operator's stool Third Edition
Dentistry Dental units Part 1: General requirements and test methods First Edition; Cancels and Replaces ISO 7494:1996
Dentistry - Dental Units - Part 2: Water and Air Supply First Edition
ISO
7497
ISO
7498-1
ISO
ISO
7498-2
7498-3
ISO
7498-4
ISO
7500-1
ISO
ISO
ISO
7500-2
7501-2
7501-3
ISO
ISO
7503-1
7503-2
ISO
ISO
7503-3
7504
ISO
7506
ISO
7507-1
ISO
7507-2
ISO
7507-3
ISO
7507-4
ISO
ISO
7507-5
7508
ISO
7509
Fertilizers - Extraction of Phosphates Soluble in Mineral Acids First Edition
Information Technology - Open Systems Interconnection - Basic Reference Model: the Basic Model Second Edition; CEN EN
ISO/IEC 7498-1: 1995; CAN/CSA-ISO/IEC 7498-1-95; Corrected and Reprinted - 1996; AS/NZS 2777.1: 1996
Information Processing Systems - Open Systems Interconnection - Basic Reference Model - Part 2: Security Architecture First Edition
Information Technology - Open Systems Interconnection - Basic Reference Model: Naming and Addressing Second Edition
Information Processing Systems - Open Systems Interconnection - Basic Reference Model - Part 4: Management Framework First
Edition
Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines - Verification
and Calibration of the Force-Measuring System Third Edition
Metallic materials Verification of static uniaxial testing machines Part 2: Tension creep testing machines Verification of the applied
force Second Edition
Identification Cards - Machine Readable Travel Documents - Part 2: Machine Readable Visa Second Edition
Identification cards - Machine readable travel documents - Part 3: Machine readable official travel documents Second Edition
Evaluation of Surface Contamination - Part 1: Beta-Emitters (Maximum Beta Energy Greater Than 0.15 MeV) and Alpha-Emitters
First Edition
Evaluation of Surface Contamination - Part 2: Tritium Surface Contamination First Edition
Evaluation of Surface Contamination - Part 3: Isomeric Transition and Electron Capture Emitters, Low Energy Beta-Emitters (Energy
Beta max is Less Than 0,15 MeV) First Edition
Gas Analysis - Vocabulary Analyse Des Gaz - Vocabulaire Second Edition
Textile Machinery and Accessories - Numbering of Harnesses for Drawing-In on Jacquard Machines First Edition; (Corrected and
Reprinted - 1992)
Petroleum and liquid petroleum products Calibration of vertical cylindrical tanks Part 1: Strapping method Second Edition; Replaces
ISO TR 7507-6
Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 2: Optical-reference-line method Second
edition
Petroleum and Liquid Petroleum Products - Calibration of Vertical Cylindrical Tanks - Part 3: Optical-Triangulation Method Second
Edition
Petroleum and Liquid Petroleum Products - Calibration of Vertical Cylindrical Tanks - Part 4: Internal Electro-Optical DistanceRanging Method First Edition Cobranded with API MPMS 2.2D
Petroleum and Liquid Petroleum Products - Calibration of Vertical Cylindrical Tanks - Part 5: External Electro-Optical DistanceRanging Method First Edition
Unplasticized Polyvinyl Chloride (PVC-U) Valves for Pipes Under Pressure - Basic Dimensions - Metric Series First Edition
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of Time to Failure under Sustained
Internal Pressure First Edition
Plastics Piping Systems - Glass-Reinforced Plastics (GRP) Components - Determination of the Amounts of Constituents Using the
Gravimetric Method First Edition
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Test Methods to Prove the
Leaktightness of the Wall under Short-Term Internal Pressure First Edition
Instant Tea in Solid Form - Determination of Moisture Content (Loss in Mass at 103 Degrees Celsius) First Edition
Instant Tea in Solid Form - Determination of Total Ash First Edition
Instant Tea in Solid Form - Sampling First Edition
Technical Drawings - Construction Drawings - Simplified Representation of Demolition and Rebuilding First Edition
Technical Drawings - Construction Drawings - General Principles of Presentation for General Arrangement and Assembly Drawings
First Edition
Ferronickel - Determination of Cobalt Content - Flame Atomic Absorption Spectrometric Method First Edition
Nickel - Determination of Silver, Arsenic, Bismuth, Cadmium, Lead, Antimony, Selenium, Tin, Tellurium and Thallium Contents Electrothermal Atomic Absorption Spectrometric Method First Edition
Nickel, Ferronickel and Nickel Alloys - Determination of Carbon Content - Infra-Red Absorption Method After Induction Furnace
Combustion First Edition
Nickel - Determination of Sulfur Content - Methylene Blue Molecular Absorption Spectrometric Method After Generation of Hydrogen
Sulfide First Edition
Nickel, Ferronickel and Nickel Alloys - Determination of Sulfur Content - Infra-Red Absorption Method After Induction Furnace
Combustion First Edition
Nickel, Ferronickel and Nickel Alloys - Determination of Sulfur Content - Iodimetric Titration Method After Induction Furnace
Combustion First Edition
Nickel Alloys - Determination of Iron Content - Titrimetric Method with Potassium Dichromate First Edition
ISO
7510
ISO
ISO
ISO
ISO
ISO
7511
7513
7514
7516
7518
ISO
ISO
7519
7520
ISO
7523
ISO
7524
ISO
7525
ISO
7526
ISO
ISO
7527
7528
ISO
7529
ISO
ISO
ISO
ISO
ISO
7530-1
7530-2
7530-3
7530-4
7530-5
Nickel Alloys - Determination of Chromium Content - Potentiometric Titration Method with Ammonium Iron(II) Sulfate First Edition
Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 1: General Requirements and Sample Dissolution First Edition;
(Corrected and Reprinted - 1992)
Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 2: Determination of Cobalt Content First Edition
Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 3: Determination of Chromium Content First Edition
Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 4: Determination of Copper Content First Edition
Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 5: Determination of Iron Content First Edition
ISO
ISO
ISO
ISO
ISO
7530-6
7530-7
7530-8
7530-9
7531
Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 6: Determination of Manganese Content First Edition
Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 7: Determination of Aluminium Content First Edition
Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 8: Determination of Silicon Content First Edition
Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 9: Determination of Vanadium Content First Edition
Wire Rope Slings for General Purposes - Characteristics and Specifications First Edition; (NZS/ISO 7531: 1987)
ISO
7535
ISO
ISO
7536
7537
ISO
7539-1
ISO
7539-2
ISO
7539-3
ISO
7539-4
ISO
7539-5
ISO
ISO
7539-6
7539-7
ISO
7539-8
ISO
ISO
ISO
ISO
ISO
7539-9
7540
7541
7542
7543-1
ISO
ISO
ISO
7543-2
7545
7546
ISO
ISO
ISO
ISO
ISO
7547
7550
7551
7558
7560
Surface Active Agents - Detergents for Domestic Machine Dishwashing - Guide for Comparative Testing of Performance First Edition
Petroleum Products - Determination of Oxidation Stability of Gasoline - Induction Period Method First Edition; (CEN EN ISO 7536:
1996)
Petroleum Products - Determination of Acid Number - Semi-Micro Colour-Indicator Titration Method Second Edition
Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 1: General Guidance on Testing Procedures First Edition; (CEN EN
ISO 7539-1: 1995)
Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 2: Preparation and Use of Bent-Beam Specimens First Edition; (CEN
EN ISO 7539-2: 1995)
Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 3: Preparation and Use of U-Bend Specimens First Edition; (CEN EN
ISO 7539-3: 1995)
Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 4: Preparation and Use of Uniaxially Loaded Tension Specimens
First Edition; (CEN EN ISO 7539-4: 1995)
Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 5: Preparation and Use of C-Ring Specimens First Edition; (CEN EN
ISO 7539-5: 1995)
Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 6: Preparation and Use of Pre-Cracked Specimens for Tests Under
Constant Load or Constant Displacement Second Edition
Corrosion of metals and alloys Stress corrosion testing Part 7: Method for slow strain rate testing Second Edition
Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 8: Preparation and Use of Specimens to Evaluate Weldments First
Edition
Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 9: Preparation and Use of Pre-Cracked Specimens for Tests Under
Rising Load or Rising Displacement First Edition
Ground paprika (Capsicum annuum L.) Specification Second Edition
Ground (Powdered) Paprika - Determination of Total Natural Colouring Matter Content First Edition
Ground (Powdered) Paprika (Capsicum Annuum Linnaeus) - Microscopical Examination First Edition
Chillies and Chilli Oleoresins - Determination of Total Capsaicinoid Content - Part 1: Spectrometric Method First Edition
Chillies and Chilli Oleoresins - Determination of Total Capsaicinoid Content - Part 2: Method Using High-Performance Liquid
Chromatography First Edition
Shipbuilding and Marine Structures - Inland Navigation - Single-Lock Automatic Couplings for Push Tows First Edition
Earth-Moving Machinery - Loader and Front Loading Excavator Buckets - Volumetric Ratings First Edition
Ships and Marine Technology - Air-Conditioning and Ventilation of Accommodation Spaces - Design Conditions and Basis of
Calculations Second Edition
Laboratory Glassware - Disposable Micropipettes First Edition
Dental Absorbent Points First Edition
Guide to the Prepacking of Fruits and Vegetables First Edition
Cucumbers - Storage and Refrigerated Transport Second Edition
ISO
ISO
ISO
ISO
7561
7562
7563
7565
Cultivated Mushrooms - Guide to Cold Storage and Refrigerated Transport First Edition
Potatoes - Guidelines for Storage in Artificially Ventilated Stores First Edition
Fresh Fruits and Vegetables - Vocabulary Fruits Et Legumes En L'Etat - Vocabulaire First Edition
Micrographics - Readers for Transparent Microforms - Measurement of Characteristics First Edition
Woodworking Machines - Thickness Planing Machines with Rotary Cutterblock for One-Side Dressing - Nomenclature and
Acceptance Conditions First Edition
Woodworking Machines - Planing Machines for Two-, Three-or Four-Side Dressing - Nomenclature and Acceptance Conditions First
Edition
ISO
7568
ISO
7569
ISO
7570
ISO
ISO
7571
7573
ISO
7574-1
ISO
7574-2
ISO
7574-3
ISO
ISO
7574-4
7575
Woodworking Machines - Surface Planing and Thicknessing Machines - Nomenclature and Acceptance Conditions First Edition
Woodworking Machines - Surface Planing Machines with Cutterblock for One-Side Dressing - Nomenclature and Acceptance
Conditions First Edition
Technical Drawings - Item Lists First Edition
Acoustics - Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment - Part 1:
General Considerations and Definitions First Edition
Acoustics - Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment - Part 2:
Methods for Stated Values for Individual Machines First Edition
Acoustics - Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment - Part 3:
Simple (Transition) Method for Stated Values for Batches of Machines First Edition
Acoustics - Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment - Part 4:
Methods for Stated Values for Batches of Machines First Edition
Commercial Road Vehicles - Flat Attachment Wheel Fixing Nuts Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
7576
7578
7579
7583
7586
7587
Road Vehicles - Two-Stage Fuel Filters for Compression-Ignition Engines - Mounting and Connecting Dimensions Second Edition
Road Vehicles - Sheath-Type Glow-Plugs - General Requirements and Test Methods Third Edition
Dyestuffs - Determination of Solubility in Organic Solvents - Gravimetric Method First Edition
Anodizing of Aluminium and Its Alloys - Vocabulary First Edition
Butter - Determination of Water Dispersion Value First Edition; (Corrected and Reprinted - 1985)
Electroplated Coatings of Tin-Lead Alloys - Specification and Test Methods First Edition
ISO
ISO
ISO
ISO
ISO
ISO
7588-1
7588-2
7588-3
7589
7590
7591
Road Vehicles - Electrical/Electronic Switching Devices - Part 1: Relays and Flashers First Edition; Replaces ISO TR 8857:1986
Road Vehicles - Electrical/Electronic Switching Devices - Part 2: Electronic Devices First Edition
Road Vehicles - Electrical/Electronic Switching Devices - Part 3: Microrelays First Edition
Photography - Illuminants for Sensitometry - Specifications for Daylight,Incandescent Tungsten and Printer Second Edition
Steel Cord Conveyor Belts - Methods for the Determination of Total Thickness and Cover Thickness Fourth Edition
Road Vehicles - Retro-Reflective Registration Plates for Motor Vehicles and Trailers - Specification First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7592
7593
7597
7598
7599
7606
7607
7608
7609
ISO
7611
ISO
7612
ISO
ISO
ISO
ISO
7616
7617-1
7617-2
7617-3
ISO
7619-1
ISO
7619-2
ISO
7622-1
ISO
ISO
ISO
7622-2
7623
7624
ISO
7625
ISO
7626-1
ISO
7626-2
ISO
7626-5
Calibrated Round Steel Link Lifting Chains - Guidelines to Proper Use and Maintenance First Edition
Chain Slings Assembled by Methods Other Than Welding - Grade T(8) First Edition
Forged Steel Lifting Hooks with Point and Eye for Use with Steel Chains of Grade T(8) First Edition
Stainless Steel Tubes Suitable for Screwing in Accordance with ISO 7-1 Second Edition
Anodizing of Aluminium and Its Alloys - General Specifications for Anodic Oxide Coatings on Aluminium First Edition
Shipbuilding - Inland Navigation Vessels - Draught Scales First Edition
Shipbuilding - Inland Navigation - Multi-Bucket Dredgers - Scale of Bucket Capacities First Edition
Shipbuilding - Inland Navigation - Couplings for Disposal of Oily Mixture and Sewage Water First Edition
Essential Oils - Analysis by Gas Chromatography on Capillary Columns - General Method First Edition
Oils of Lemon and Petitgrain Citronnier, and Oil of Lime Obtained by a Mechanical Process - Determination of Citral (Neral +
Geranial) Content - Gas Chromatographic Method on Capillary Columns First Edition
Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems Mounting dimensions Third Edition
Cellular Plastics, Rigid - Determination of Compressive Creep Under Specified Load and Temperature Conditions First Edition
Plastics-Coated Fabrics for Upholstery - Part 1: Specification for PVC-Coated Knitted Fabrics Third Edition
Plastics-Coated Fabrics for Upholstery - Part 2: Specification for PVC-Coated Woven Fabrics Third Edition
Plastics-Coated Fabrics for Upholstery - Part 3: Specification for Polyurethane-Coated Woven Fabrics First Edition
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) First
Edition; Together with ISO 7619-2:2004 Replaces ISO 7619:1997
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method First Edition;
Together with ISO 7619-1:2004 Replaces ISO 7619:1997
Steel Cord Conveyor Belts - Longitudinal Traction Test - Part 1: Measurement of Elongation First Edition; (CEN EN ISO 7622-1:
1995)
Steel Cord Conveyor Belts - Longitudinal Traction Test - Part 2: Measurement of Tensile Strength First Edition; (CEN EN ISO 7622-2:
1995)
Steel Cord Conveyor Belts - Cord-to-Coating Bond Test - Initial Test and After Thermal Treatment Second Edition
Petroleum Products and Lubricants - Inhibited Mineral Turbine Oils - Determination of Oxidation Stability First Edition
Sintered metal materials, excluding hardmetals Preparation of samples for chemical analysis for determination of carbon content
Second Edition
Vibration and Shock - Experimental Determination of Mechanical Mobility - Part 1: Basic Definitions and Transducers First Edition
Vibration and Shock - Experimental Determination of Mechanical Mobility - Part 2: Measurements Using Single-Point Translation
Excitation with an Attached Vibration Exciter First Edition
Vibration and Shock - Experimental Determination of Mechanical Mobility - Part 5: Measurements Using Impact Excitation with an
Exciter Which Is Not Attached to the Structure First Edition
ISO
7627-1
ISO
7627-2
ISO
7627-3
ISO
7627-4
ISO
7627-5
ISO
ISO
7627-6
7628-1
ISO
ISO
7628-2
7629
ISO
7630
ISO
7631
ISO
7632
ISO
7633
ISO
7634
ISO
7635
ISO
7637-1
ISO
7637-2
ISO
7637-3
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 1: General Requirements First Edition; (CEN EN
27627-1: 1993)
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 2: Determination of Calcium, Potassium,
Magnesium and Sodium in Contents from 0,001 to 0,02 % (m/m) First Edition; (CEN EN 27627-2: 1993)
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 3: Determination of Cobalt, Iron, Manganese and
Nickel in Contents from 0,01 to 0,5 % (m/m) First Edition; (CEN EN 27627-3: 1993)
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 4: Determination of Molybdenum, Titanium and
Vanadium in Contents from 0,01 to 0,5 % (m/m) First Edition; (CEN EN 27627-4: 1993)
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 5: Determination of Cobalt, Iron, Manganese,
Molybdenum, Nickel, Titanium and Vanadium in Contents from 0,5 to 2 % (m/m) First Edition; (CEN EN 27627-5: 1993)
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 6: Determination of Chromium in Contents from
0,01 to 2 % (m/m) First Edition; (CEN EN 27627-6: 1993)
Road Vehicles - Thermoplastic Tubing for Air Braking Systems - Part 1: Dimensions and Marking Second Edition
Road Vehicles - Thermoplastics Tubing for Air Braking Systems - Part 2: Mounting on Vehicle and Test Methods First Edition;
Technical Corrigendum 1: 03-01-1999
Road Vehicles - Brake Linings - Disc Brake Pads - Evaluation of Surface and Material Flaws After Testing First Edition
Road Vehicles - Elastomeric O-Rings for Hydraulic Drum Brake Wheel Cylinders Using a Petroleum Base Hydraulic Brake Fluid
(Service Temperature 120 Degrees Celsius Max.) First Edition
Road Vehicles - Elastomeric Cups and Seals for Cylinders for Hydraulic Braking Systems Using a Petroleum Base Hydraulic Brake
Fluid (Service Temperature 120 Degrees Celsius Max.) First Edition
Road Vehicles - Elastomeric Seals for Hydraulic Disc Brake Cylinders Using a Petroleum Base Hydraulic Brake Fluid (Service
Temperature 120 Degrees Celsius Max.) First Edition
Road Vehicles - Elastomeric Boots for Drum Type Hydraulic Brake Wheel Cylinders Using a Petroleum Base Hydraulic Brake Fluid
(Service Temperature 120 Degrees Celsius Max.) First Edition
Road vehicles ù Compressed air braking systems for towed vehicles including those with electronic braking control functions ù Test
procedures Third Edition
Road vehicles Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions Test
procedures Third Edition
Road Vehicles - Electrical Disturbance from Conduction and Coupling - Part 1: Definitions and General Considerations Second
Edition
Road Vehicles - Electrical Disturbance by Conduction and Coupling - Part 2: Commercial Vehicles with Nominal 24 V Supply Voltage Electrical Transient Conduction Along Supply Lines Only First Edition Second Edition
Road vehicles ù Electrical disturbances from conduction and coupling ù Part 3: Electrical transient transmission by capacitive and
inductive coupling via lines other than supply lines Second Edition
ISO
7638-1
ISO
ISO
7638-2
7639
ISO
7641-1
ISO
7642
ISO
ISO
ISO
ISO
ISO
7643
7646
7647
7648
7649
ISO
ISO
7650
7651
ISO
ISO
ISO
ISO
7653
7654
7656
7660
ISO
ISO
ISO
ISO
ISO
7661
7662
7663
7664
7665
ISO
7668
Road vehicles Connectors for the electrical connection of towing and towed vehicles Part 1: Connectors for braking systems and
running gear of vehicles with 24 V nominal supply voltage Second Edition; This Standard Together with ISO 7638-2 Replaces ISO
7638
Road vehicles Connectors for the electrical connection of towing and towed vehicles Part 2: Connectors for braking systems and
running gear of vehicles with 12 V nominal supply voltage Second Edition; Together with ISO 7638-1, it Cancels and Replaces ISO
7638: 1985
Road Vehicles - Diagnostic Systems - Graphical Symbols First Edition
Road Vehicles - Caravans and Light Trailers - Calculation of the Mechanical Strength of the Drawbar - Part 1: Steel Drawbars First
Edition
Caravans and Light Trailers - Trailers of Categories O1 and O2 with Overrun Brakes - Inertia Bench Test Methods for Brakes Second
Edition
Caravans and Light Trailers - Trailers of Categories O1 and O2 with Overrun Brakes - Linear Bench Test Methods for Brake Controls
Second Edition
Commercial Vehicles and Buses - Gearbox Flanges - Type A First Edition
Commercial Vehicles and Buses - Gearbox Flanges - Type S First Edition
Flywheel Housings for Reciprocating Internal Combustion Engines - Nominal Dimensions and Tolerances First Edition
Clutch Housings for Reciprocating Internal Combustion Engines - Nominal Dimensions and Tolerances First Edition
Commercial Vehicles and Buses - Mounting Dimensions for Starter Motors of Types 1, 2, 3 and 4 First Edition; Amendment 1:08-152001
Commercial Vehicles and Buses - Mounting Dimensions for Alternators of Types 1, 2 and 3 First Edition
Road Vehicles - Commercial Vehicles - Couplings Between Power Take-Offs (PTO) and Ancillary Driven Units First Edition;
(Corrected and Reprinted - 1986)
Road Vehicles - Spin-On Fuel Filters for Diesel Engines - Mounting and Connecting Dimensions Third Edition
Commercial Road Vehicles - Dimensional Codes First Edition
Essential Oils - Determination of Ester Value of Oils Containing Difficult-to-Saponify Esters First Edition
Aerospace - Fluid Systems - Clamp Blocks for Tube Lines Having Axial Alignment - Design Standard and Qualification Testing Metric Series First Edition
Rubber and Plastics Hoses - Determination of Abrasion of Lining First Edition CEN EN ISO 7662: 1996
Halogenated isobutene-isoprene rubber (BIIR and CIIR) Evaluation procedures Fourth Edition
Rubber, Raw Natural and Synthetic - General Guidance on Storage First Edition; Replaces ISO TR 7664
Information Processing - File Structure and Labelling of Flexible Disk Cartridges for Information Interchange First Edition
Anodized Aluminium and Aluminium Alloys - Measurement of Specular Reflectance and Specular Gloss at Angles of 20 Degrees, 45
Degrees, 60 Degrees or 85 Degrees First Edition
ISO
7671
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polypropylene (PP) Second Edition
Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Chlorinated Poly(Vinyl
Chloride) (PVC-C) Second Edition
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Acrylonitrile-butadiene-styrene
(ABS) Second Edition
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Creep Factor under Dry
Conditions First Edition
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of Initial Specific Ring Stiffness First
Edition
Plastics pipes and fittings - Determination of opacity Second Edition
ISO
7675
ISO
7682
ISO
7684
ISO
ISO
7685
7686
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7689
7692
7693
7698
7700-1
7700-2
7701
7702
7703
7704
7707
7708
7711-1
7711-2
7712
7713
7714
Aerospace - Alloy Steel Bolts with Strength Classification 1 100 MPa and MJ Threads - Procurement Specification First Edition
Ferrotitanium - Determination of Titanium Content - Titrimetric Method First Edition
Ferrotungsten - Determination of Tungsten Content - Cinchonine Gravimetric Method First Edition
Cereals, Pulses and Derived Products - Enumeration of Bacteria, Yeasts and Moulds First Edition
Check of the Calibration of Moisture Meters - Part 1: Moisture Meters for Cereals First Edition
Check of the Calibration of Moisture Meters - Part 2: Moisture Meters for Oilseeds First Edition
Dried Apples - Specification and Test Methods Second Edition
Dried Pears - Specification and Test Methods Second Edition; Technical Corrigendum 1 02/01/2001
Dried Peaches - Specification and Test Methods Second Edition; Technical Corrigendum 1 02/01/2001
Water Quality - Evaluation of Membrane Filters Used for Microbiological Analyses First Edition
Commercial Road Vehicles - Connections for Rear-Mounted Power Take-Offs (PTO) First Edition
Air Quality - Particle Size Fraction Definitions for Health-Related Sampling First Edition
Dental Rotary Instruments - Diamond Instruments - Part 1: Dimensions, Requirements, Marking and Packaging First Edition
Dental Rotary Instruments - Diamond Instruments - Part 2: Discs First Edition; (CEN EN ISO 7711-2: 1995)
Laboratory Glassware - Disposable Pasteur Pipettes First Edition
Laboratory Glassware - Disposable Serological Pipettes First Edition
Agricultural Irrigation Equipment - Volumetric Valves - General Requirements and Test Methods Third Edition
ISO
ISO
ISO
7715
7716
7717
ISO
ISO
ISO
ISO
7718
7719
7720
7721
Air Cargo Equipment - Ground Handling and Transport Systems for Unit Load Devices - Minimum Requirements First Edition
Air Cargo Equipment - Unit Load Devices Transport Vehicle (UTV) - Functional Requirements First Edition
Aircraft - Four-Wheel-Drive Tow Tractors - Performance Requirements Factors for Design First Edition
Aircraft Main-deck passenger doors Interface requirements for connection with passenger-boarding bridge or transfer vehicle
Second Edition
Prevailing Torque Type All-Metal Hexagon Nuts, Style 1 - Property Classes 5, 8 and 10 Second Edition
Prevailing Torque Type All-Metal Hexagon Nuts, Style 2 - Property Class 9 Second Edition
Countersunk Head Screws - Head Configuration and Gauging First Edition
ISO
7721-2
ISO
7722
ISO
ISO
ISO
ISO
7723
7724-1
7724-2
7724-3
ISO
ISO
7725
7726
ISO
7727
ISO
7728
ISO
7729
ISO
ISO
ISO
ISO
7730
7731
7736
7737
ISO
7738
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7739
7740
7741
7742
7743
7745
7747
7749-1
7750-1
7750-2
Countersunk Flat Head Screws - Part 2: Penetration Depth of Cross Recesses First Edition; (CEN EN ISO 7721-2: 1990)
Aluminium Alloy Castings Produced by Gravity, Sand, or Chill Casting, or by Related Processes - General Conditions for Inspection
and Delivery First Edition
Manganese Ores and Concentrates - Determination of Titanium Content - 4,4 -Diantipyrylmethane Spectrometric Method First
Edition
Paints and Varnishes - Colorimetry - Part 1: Principles First Edition
Paints and Varnishes - Colorimetry - Part 2: Colour Measurement First Edition
Paints and Varnishes - Colorimetry - Part 3: Calculation of Colour Differences First Edition
Rubber and Rubber Products - Determination of Bromine and Chlorine Content - Oxygen Flask Combustion Technique First Edition
Ergonomics of the Thermal Environment - Instruments for Measuring Physical Quantities Second Edition
Joints in Building - Principles for Jointing of Building Components - Accommodation of Dimensional Deviations During Construction
First Edition
Typical Horizontal Joints Between an External Wall of Prefabricated Ordinary Concrete Components and a Concrete Floor Properties, Characteristics and Classification Criteria First Edition
Typical Vertical Joints Between Two Prefabricated Ordinary Concrete External Wall Components - Properties, Characteristics and
Classification Criteria First Edition
Ergonomics of the thermal environment Analytical determination and interpretation of thermal comfort using calculation of the PMV
and PPD indices and local thermal comfort criteria Third Edition
Ergonomics Danger signals for public and work areas Auditory danger signals Second Edition
Road Vehicles - Car Radio for Front Installation - Installation Space Including Connections First Edition
Tolerances for Building - Presentation of Dimensional Accuracy Data First Edition
Assembly Tools for Screws and Nuts - Combination Wrenches - Lengths of Wrenches and Maximum Thickness of Heads Third
Edition
Cinematography - Two-Track Photographic Sound Records on 16 mm Motion-Picture Prints - Positions and Width Dimensions First
Edition
Instruments for Surgery - Scalpels with Detachable Blades - Fitting Dimensions First Edition
Instruments for Surgery - Scissors and Shears - General Requirements and Test Methods First Edition
Solid Fertilizers - Reduction of Samples First Edition
Rubber, vulcanized or thermoplastic Determination of compression stressstrain properties Second Edition
Hydraulic Fluid Power - Fire-Resistant (FR) Fluids - Guidelines for Use First Edition
Road Vehicles - Filter Elements for Full Flow Oil Filters - Dimensions First Edition
Agricultural Irrigation Equipment - Rotating Sprinklers - Part 1: Design and Operational Requirements Second Edition
Commercial Vehicles - Dimensions of Air Filter Elements - Part 1: Types A and B Second Edition
Road Vehicles - Air Filter Elements for Commercial Vehicles - Dimensions - Part 2: Types C and D First Edition
ISO
ISO
7751
7752-1
ISO
ISO
ISO
7752-2
7752-3
7752-4
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7752-5
7753
7755-1
7755-2
7755-3
7755-4
7755-5
7755-6
7755-7
7755-8
7755-9
7755-10
7755-11
7755-12
ISO
ISO
ISO
ISO
7759
7760
7761
7764
ISO
ISO
7765-1
7765-2
ISO
ISO
ISO
ISO
ISO
7766
7768
7769
7770
7771
Rubber and Plastics Hoses and Hose Assemblies - Ratios of Proof and Burst Pressure to Design Working Pressure Second Edition
Lifting Appliances - Controls - Layout and Characteristics - Part 1: General Principles First Edition
Lifting Appliances - Controls - Layout and Characteristics - Part 2: Basic Arrangement and Requirements for Mobile Cranes First
Edition; Addendum 1: 1986
Cranes - Controls - Layout and Characteristics - Part 3: Tower Cranes First Edition
Cranes - Controls - Layout and Characteristics - Part 4: Jib Cranes First Edition
Lifting Appliances - Controls - Layout and Characteristics - Part 5: Overhead Travelling Cranes and Portal Bridge Cranes First Edition
Nuclear Energy - Performance and Testing Requirements for Criticality Detection and Alarm Systems First Edition
Hardmetal Burrs - Part 1: General Specifications First Edition
Hardmetal Burrs - Part 2: Cylindrical Burrs (Style A) First Edition
Hardmetal Burrs - Part 3: Cylindrical Round- (Ball-) Nose Burrs (Style C) First Edition
Hardmetal Burrs - Part 4: Spherical Burrs (Style D) First Edition
Hardmetal Burrs - Part 5: Oval Burrs (Style E) First Edition
Hardmetal Burrs - Part 6: Arch Round- (Ball-) Nose Burrs (Style F) First Edition
Hardmetal Burrs - Part 7: Arch Pointed-Nose Burrs (Style G) First Edition
Hardmetal Burrs - Part 8: Flame Burrs (Style H) First Edition
Hardmetal Burrs - Part 9: 60 Degrees and 90 Degrees Cone Burrs (Styles J and K) First Edition
Hardmetal Burrs - Part 10: Conical Round- (Ball-) Nose Burrs (Style L) First Edition
Hardmetal Burrs - Part 11: Conical Pointed-Nose Burrs (Style M) First Edition
Hardmetal Burrs - Part 12: Inverted Cone Burrs (Style N) First Edition
Anodizing of Aluminium and Its Alloys - Measurement of Reflectivity Characteristics of Aluminium Surfaces Using Abridged
Goniophotometer or Goniophotometer First Edition
Photography - Processing Waste - Determination of Hydroquinone Second Edition
Micrographics Single-core cartridge for 16 mm processed microfilm Dimensions and operational constraints First Edition
Iron ores Preparation of predried test samples for chemical analysis Second Edition
Plastics Film and Sheeting - Determination of Impact Resistance by the Free-Falling Dart Method Part 1: Staircase Methods First
Edition
Plastics Film and Sheeting - Determination of Impact Resistance by the Free-Falling Dart Method First Edition
Processing photographic wastes Analysis of cyanides Determination of hexacyanoferrate(ll) and hexacyanoferrate(lll) by
spectrometry First Edition; Replaces ISO 7766-1
Textiles Test Method for Assessing the Smoothness Appearance of Fabrics After Cleansing Second Edition
Textiles Test method for assessing the appearance of creases in fabrics after cleansing Third Edition
Textiles Test method for assessing the smoothness appearance of seams in fabrics after cleansing Second Edition
Textiles - Determination of Dimensional Changes of Fabrics Induced by Cold-Water Immersion First Edition
ISO
7773
ISO
ISO
7776
7778
ISO
7779
ISO
ISO
7780
7781
ISO
7783-1
ISO
7783-2
ISO
7784-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7784-2
7784-3
7785-1
7785-2
7786
7787-1
7787-2
7787-3
7787-4
7788
ISO
7789
ISO
7790
ISO
7792-1
ISO
ISO
7792-2
7794
Magnesium Alloys - Round Bars and Tubes - Dimensional Tolerances First Edition
Information Technology - Telecommunications and Information Exchange between Systems - High-Level Data Link Control
Procedures - Description of the X.25 LAPB-Compatible DTE Data Link Procedures Second Edition; Amendment 1-11/15/1996
Steel Plate with Specified Through-Thickness Characteristics First Edition
Acoustics - Measurement of Airborne Noise Emitted by Information Technology and Telecommunications Equipment Second Edition;
Amendment 1: 3/01/2003
Rubber and Rubber Latices - Determination of Manganese Content - Sodium Periodate Photometric Methods Second Edition
Styrene-Butadiene Rubber, Raw - Determination of Soap and Organic-Acid Content Third Edition
Paints and Varnishes - Determination of Water-Vapour Transmission Rate - Part 1: Dish Method for Free Films First Edition;
Corrigendum 1-1998
Paints and Varnishes - Coating Materials and Coating Systems for Exterior Masonry and Concrete - Part 2: Determination and
Classification of Water-Vapour Transmission Rate (Permeability) First Edition
Paints and Varnishes - Determination of Resistance to Abrasion - Part 1: Rotating Abrasive-Paper-Covered Wheel Method First
Edition
Paints and Varnishes - Determination of Resistance to Abrasion - Part 2: Rotating Abrasive Rubber Wheel Method First Edition
Paints and Varnishes - Determination of Resistance to Abrasion - Part 3: Reciprocating Test Panel Method First Edition
Dental Handpieces - Part 1: High-Speed Air-Turbine Handpieces Second Edition
Dental Handpieces - Part 2: Straight and Geared Angle Handpieces Second Edition
Dental Rotary Instruments - Laboratory Abrasive Instruments Third Edition
Dental Rotary Instruments - Cutters Part 1: Steel Laboratory Cutters First Edition; (CAN/CSA-Z349.35.1-M92)
Dental Rotary Instruments - Cutters - Part 2: Carbide Laboratory Cutters Fourth Edition
Dental Rotary Instruments - Cutters - Part 3: Carbide Laboratory Cutters for Milling Machines First Edition
Dental Rotary Instruments - Cutters - Part 4: Miniature Carbide Laboratory Cutters First Edition
Steel - Surface Finish of Hot-Rolled Plates and Wide Flats - Delivery Requirements First Edition
Hydraulic Fluid Power - Two, Three- and Four-Port Screw-In Cartridge Valves - Cavities First Edition; Technical Corrigendum 1: 0215-1999
Hydraulic Fluid Power - Four-Port Modular Stack Valves and Four-Port Directional Control Valves, Sizes 02, 03 and 05 - Clamping
Dimensions Second Edition
Plastics - Thermoplastic Polyester (TP) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications
Third Edition
Plastics - Thermoplastic Polyester (TP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination
of Properties Second Edition
Cross-Country Skis - Ski Binding Screws - Requirements Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7795
7796
7797
7798
7799
7800
7801
7802
7803
7804
7805-1
7805-2
7806
ISO
ISO
ISO
ISO
7807
7808
7810
7811-1
ISO
7811-2
ISO
ISO
ISO
ISO
7811-6
7811-7
7812-1
7813
ISO
ISO
7816-1 AMD 1
7816-1
ISO
ISO
ISO
7816-3
7816-4
7816-5
ISO
ISO
7816-6 CORR 1
7816-6
Cross-Country Skis - Ski Binding Screws - Test Methods Second Edition
Skis - Geometry - Measuring Conditions First Edition
Cross-Country Skis - Determination of Breaking Load and Deflection at Break with Quasistatic Load First Edition
Cross-Country Skis - Determination of Fatigue Indexes - Cyclic Loading Test First Edition
Metallic Materials - Sheet and Strip 3 mm Thick or Less - Reverse Bend Test First Edition
Metallic Materials - Wire - Simple Torsion Test Second Edition
Metallic Materials - Wire - Reverse Bend Test First Edition; Replaces ISO 144: 1973
Metallic Materials - Wire - Wrapping Test First Edition; Replaces ISO R 145: 1960
Commercial Road Vehicles - Steering Ball Joints First Edition
Commercial Road Vehicles - Side Openings for Truck Power Take-Offs First Edition
Industrial Plate Screens - Part 1: Thickness of 3 mm and Above First Edition
Industrial Plate Screens - Part 2: Thickness Below 3 mm First Edition
Industrial Plate Screens - Codification for Designating Perforations First Edition
Air Distribution - Straight Circular Sheet Metal Ducts with a Lock Type Spiral Seam and Straight Rectangular Sheet Metal Ducts Dimensions First Edition
Plastics - Thermosetting Moulding Materials - Determination of Transfer Flow First Edition
Identification cards Physical characteristics Third Edition
Identification Cards - Recording Technique - Part 1: Embossing Third Edition
Identification Cards - Recording Technique - Part 2: Magnetic Stripe - Low Coercivity Third Edition; Cancels and Replaces ISO/IEC
7811-2:1995, ISO/IEC 7811-4:1995, ISO/IEC 7811-5:1995
Identification cards - Recording technique - Part 6: Magnetic stripe - High coercivity Second Edition; Cancels and Replaces ISO/IEC
7811-6:1996 and ISO/IEC 7811-4 thru 5:1995; Amendment 1: 10/01/2005
Identification cards Recording technique Part 7: Magnetic stripe High coercivity, high density First Edition
Identification cards Identification of issuers Part 1: Numbering system Third Edition
Information technology Identification cards Financial transaction cards Sixth Edition
Identification Cards - Integrated Circuit(s) Cards with Contacts - Part 1: Physical Characteristics Amendment 1: Maximum Height of
the IC Contact Surface
Identification Cards - Integrated Circuit(s) Cards with Contacts - Part 1: Physical Characteristics First Edition
dentification cards Integrated circuit cards Part 3: Cards with contacts Electrical interface and transmission protocols Third Edition
Identification cards Integrated circuit cards Part 4: Organization, security and commands for interchange Second Edition
Identification Cards - Integrated Circuit Cards - Part 5: Registration of application providers Second Edition
Identification cards ù Integrated circuit cards ù Part 6: Interindustry data elements for interchange TECHNICAL CORRIGENDUM 1
Second Edition
Identification cards ù Integrated circuit cards ù Part 6: Interindustry data elements for interchange Second Edition
ISO
ISO
ISO
7816-7
7816-8
7816-9
ISO
ISO
7816-10
7816-11
ISO
7816-12
ISO
7816-13
ISO
ISO
7816-15 CORR 1
7816-15
ISO
7816-15 FDAM 1
ISO
ISO
7822
7823-1
ISO
7823-2
ISO
ISO
ISO
7823-3
7824
7825
ISO
7827
ISO
7828
ISO
7829
ISO
7831
ISO
ISO
7832
7834
Indentification Cards - Integrated Circuit(s) Cards with Contacts - Part 7: Interindustry Commands for Structured Card Query
Language (SCQL) First Edition
Identification cards Integrated circuit cards Part 8: Commands for security operations Second Edition
Identification cards Integrated circuit cards Part 9: Commands for card management Second Edition
Indentification Cards - Integrated Circuit(s) Cards with Contacts - Part 10: Electronic Signals and Answer to Reset for Synchronous
Cards First Edition
Identification cards Integrated circuit cards Part 11: Personal verification through biometric methods First Edition
Identification cards Integrated circuit cards Part 12: Cards with contacts USB electrical interface and operating procedures First
Edition
Identification cards ù Integrated circuit cards ù Part 13: Commands for application management in a multi-application environment
First Edition
Identification cards ù Integrated circuit cards with contacts ù Part 15: Cryptographic information application TECHNICAL
CORRIGENDUM 1 First Edition
Identification cards ù Integrated circuit cards with contacts ù Part 15: Cryptographic information application First Edition
Identification cards - Integrated circuit cards - Part 15: Cryptographic information application AMENDMENT 1: Examples of the use of
the cryptographic information application First Edition
Textile Glass Reinforced Plastics - Determination of Void Content - Loss on Ignition, Mechanical Disintegration and Statistical
Counting Methods First Edition
Plastics - Poly(Methyl Methacrylate) Sheets - Types, Dimensions and Characteristics - Part 1: Cast Sheets Fourth Edition
Plastics - Poly(Methyl Methacrylate) Sheets - Types, Dimensions and Characteristics - Part 2: Extruded Sheets Third Edition
Plastics ù Poly(methyl methacrylate) sheets ù Types, dimensions and characteristics ù Part 3: Continuous cast sheets Second
Edition
Shipbuilding and Marine Structures - Lubrication Nipples - Cone and Flat Types First Edition
Shipbuilding - Deck Machinery - General Requirements First Edition
Water Quality - Evaluation in an Aqueous Medium of theUltimate" Aerobic Biodegradability of Organic Compounds - Method by
Analysis of Dissolved Organic Carbon (DOC) Second Edition; (CEN EN ISO 7827: 1995)"
Water Quality - Methods of Biological Sampling - Guidance on Handnet Sampling of Aquatic Benthic Macro-Invertebrates First
Edition; (CEN EN 27828: 1194)
Photography - Black-and-White Aerial Camera Films - Determination of ISO Speed and Average Gradient First Edition; Technical
Corrigendum 1:06-01-2001
Cinematography - A-Chain Frequency Response for Reproduction of 35 mm Photographic Sound - Reproduction Characteristics
First Edition
Cinematography - Photoelectric Output Factor of Photographic-Type Audio-Level Test Films - Measurement and Calibration First
Edition
Iron Ores - Determination of Arsenic Content - Molybdenum Blue Spectrophotometric Method First Edition
ISO
ISO
7837
7838
Fertilizers - Determination of Bulk Density (Loose) of Fine-Grained Fertilizers Second Edition
Shipbuilding - Shiplines - Formats and Data Organization First Edition
Textile Machinery and Accessories - Knitting Machines - Vocabulary and classification MatÚriel pour l'industrie textile Machines Ó
tricoter Vocabulaire et classification Second Edition
Small Craft - Fire-Resistant Fuel Hoses Third Edition
Automatic Steam Traps - Determination of Steam Loss - Test Methods First Edition
Automatic Steam Traps - Determination of Discharge Capacity - Test Methods First Edition
Grooved Vertical Joints with Connecting Bars and Concrete Infill Between Large Reinforced Concrete Panels - Laboratory
Mechanical Tests - Effect of Tangential Loading First Edition
Horizontal Joints Between Load-Bearing Walls and Concrete Floors - Laboratory Mechanical Tests - Effect of Vertical Loading and of
Moments Transmitted by the Floors First Edition
ISO
ISO
ISO
ISO
7839
7840
7841
7842
ISO
7844
ISO
7845
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7847
7850
7851
7852
7854
7857-1
7857-3
7859
7860
7862
7863
7864
7866
ISO
7867-1
ISO
ISO
ISO
7867-2
7870-1
7873
ISO
7875-1
Tyres and rims (metric series) for agricultural tractors and machines - Part 2: Service description and load ratings Second Edition
Control charts ù Part 1: General guidelines First Edition [Cancelled: ISO 7870]
Control Charts for Arithmetic Average with Warning Limits First Edition
Water Quality - Determination of Surfactants - Part 1: Determination of Anionic Surfactants by Measurement of the Methylene Blue
Index (MBAS) Second Edition; Corrigendun 1, 7/1/2003
ISO
7875-2
Water Quality - Determination of Surfactants - Part 2: Determination of Non-Ionic Surfactants Using Dragendorff Reagent First Edition
Animal and Vegetable Fats and Oils - Determination of Polyunsaturated Fatty Acids with a Cis,Cis 1,4-diene Structure First Edition
Cellular Plastics, Rigid - Determination of Compressive Creep First Edition
Fertilizers and Soil Conditioners - Classification First Edition
Earth-Moving Machinery - Plough Bolt Heads - Shapes and Dimensions (Excluding Thread Dimensions) First Edition
Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Damage by Flexing Second Edition
Intra-Uterine Devices - Part 1: Determination of Breaking Force First Edition
Intra-Uterine Devices - Part 3: Packaging and Labelling First Edition
Mopeds - Fuel Consumption Measurements First Edition
Motorcycles - Methods of Measuring Fuel Consumption Second Edition
Road vehicles Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions Second Edition
Height Setting Micrometers and Riser Blocks First Edition
Sterile Hypodermic Needles for Single Use Third Edition; (CEN EN ISO 7864: 1995)
Gas Cylinders - Refillable Seamless Aluminium Alloy Gas Cylinders - Design, Construction and Testing First Edition
Tyres and Rims (Metric Series) for Agricultural Tractors and Machines - Part 1: Tyre Designation, Dimensions and Marking, and
Tyre/Rim Coordination Fourth Edition
ISO
7876-1
ISO
ISO
7876-2
7876-3
ISO
7876-4
ISO
ISO
7876-5
7879
Fuel Injection Equipment - Vocabulary - Part 1: Fuel Injection Pump Equipement D'Injection De Combustible - Vocabulaire - Partie 1:
Pompes D'Injection De Combustible Second Edition; Amendment 1: 05/01/1999
Fuel Injection Equipment - Vocabulary - Part 2: Fuel Injectors Equipement D'Injection De Combustible - Vocabulaire - Partie 2: PorteInjecteurs De Combustible Complets First Edition; Amendment 1: 05/01/1999
Fuel Injection Equipment - Vocabulary - Part 3: Unit Injectors First Edition
Fuel Injection Equipment - Vocabulary - Part 4: High-Pressure Pipes and End-Connections quipement d'injection de combustible
Vocabulaire Partie 4: Tuyauteries et raccords haute pression Second Edition
Fuel injection equipment Vocabulary Part 5: Common rail fuel injection system quipement d'injection de combustible Vocabulaire
Partie 5: Syst×me d'injection de combustible Ó rampe commune First Edition
Diesel Engines - Cradle-Mounted In-Line Fuel Injection Pumps - Mounting Dimensions Third Edition
ISO
ISO
7884-1
7884-2
Glass - Viscosity and Viscometric Fixed Points - Part 1: Principles for Determining Viscosity and Viscometric Fixed Points First Edition
Glass - Viscosity and Viscometric Fixed Points - Part 2: Determination of Viscosity by Rotation Viscometers First Edition
ISO
ISO
7884-3
7884-4
Glass - Viscosity and Viscometric Fixed Points - Part 3: Determination of Viscosity by Fibre Elongation Viscometer First Edition
Glass - Viscosity and Viscometric Fixed Points - Part 4: Determination of Viscosity by Beam Bending First Edition
ISO
ISO
7884-5
7884-6
ISO
7884-7
Glass - Viscosity and Viscometric Fixed Points - Part 5: Determination of Working Point by Sinking Bar Viscometer First Edition
Glass - Viscosity and Viscometric Fixed Points - Part 6: Determination of Softening Point First Edition
Glass - Viscosity and Viscometric Fixed Points - Part 7: Determination of Annealing Point and Strain Point by Beam Bending First
Edition
ISO
ISO
7884-8
7885
Glass - Viscosity and Viscometric Fixed Points - Part 8: Determination of (Dilatometric) Transformation Temperature First Edition
Sterile Dental Injection Needles for Single Use Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7886-1
7886-2
7886-3
7886-4
7887
7888
7889
7890-3
7892
ISO
7899-1
Sterile Hypodermic Syringes for Single Use - Part 1: Syringes for Manual Use First Edition; Replaces ISO 7886; Corrigendum 1-1995
Sterile Hypodermic Syringes for Single Use - Part 2: Syringes for Use with Power-Driven Syringe Pumps First Edition
Sterile hypodermic syringes for single use - Part 3: Auto-disable syringes for fixed-dose immunization First Edition
Sterile hypodermic syringes for single use Part 4: Syringes with re-use prevention feature First Edition
Water Quality - Examination and Determination of Colour Second Edition; (CEN EN ISO 7887: 1994)
Water Quality - Determination of Electrical Conductivity First Edition; (CEN EN 27888: 1993)
Yogur - Enumeration of Characteristic Microorganisms - Colony-Count Technique at 37 Degrees Celcius First Edition
Water Quality - Determination of Nitrate - Part 3: Spectrometric Method Using Sulfosalicylic Acid First Edition
Vertical Building Elements - Impact Resistance Tests - Impact Bodies and General Test Procedures First Edition
Water Quality - Detection and Enumeration of Intestinal Enterococci in Surface and Waste Water - Part 1: Miniaturized Method (Most
Probable Number) by Inoculation in Liquid Medium Corrigendum 1: 2000; Second Edition
ISO
ISO
7899-2
7900
ISO
7902-1
ISO
7902-2
ISO
ISO
ISO
7902-3
7904-1
7904-2
ISO
7905-1
ISO
7905-2
ISO
7905-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7905-4
7907
7908
7910
7911
7913
7914
7915
7918
ISO
7919-1
ISO
7919-2
ISO
7919-3
ISO
7919-4
Water Quality - Detection and Enumeration of Intestinal Enterococci - Part 2: Membrane Filtration Method Second Edition
Steel wire and wire products for fences Zinc- and zinc-alloy-coated steel barbed wire Second Edition
Hydrodynamic Plain Journal Bearings under Steady-State Conditions - Circular Cylindrical Bearings - Part 1: Calculation Procedure
First Edition
Hydrodynamic Plain Journal Bearings under Steady-State Conditions - Circular Cylindrical Bearings - Part 2: Functions Used in the
Calculation Procedure First Edition
Hydrodynamic Plain Journal Bearings under Steady-State Conditions - Circular Cylindrical Bearings - Part 3: Permissible Operational
Parameters First Edition
Plain Bearings - Symbols - Part 1: Basic Symbols First Edition
Plain Bearings - Symbols - Part 2: Applications First Edition
Plain Bearings - Bearing Fatigue - Part 1: Plain Bearings in Test Rigs and in Applications Under Conditions of Hydrodynamic
Lubrication First Edition
Plain Bearings - Bearing Fatigue - Part 2: Test with a Cylindrical Specimen of a Metallic Bearing Material First Edition; (Corrected and
Reprinted - 1996)
Plain Bearings - Bearing Fatigue - Part 3: Test on Plain Strips of a Metallic Multilayer Bearing Material First Edition; (Corrected and
Reprinted - 1996)
Plain Bearings - Bearing Fatigue - Part 4: Test on Half-Bearings of a Metallic Multilayer Bearing Material First Edition; (Corrected and
Reprinted - 1996)
Carob - Specification First Edition
Dried Sweet Cherries - Specification First Edition
Dried Mulberries - Specification First Edition
Unshelled Pine Nuts - Specification First Edition
Aerospace - Bolts and Screws, Metric - Tolerances of Form and Position Second Edition
Forestry Machinery - Portable Chain-Saws - Minimum Handle Clearance and Sizes Third Edition
Forestry Machinery - Portable Chain-Saws - Determination of Handle Strength Second Edition
Forestry Machinery - Portable Brush-Cutters and Grass-Trimmers - Cutting Attachment Guard Dimensions Second Edition
Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 1: General
Guidelines Second Edition
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Rotating Shafts - Part 2: Land-Based Steam Turbines
and Generators in Excess of 50 MW with Normal Operating Speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min Second
Edition
Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 3: Coupled
Industrial Machines First Edition
Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 4: Gas
Turbine Sets First Edition
ISO
ISO
ISO
ISO
ISO
7919-5
7920
7922
7925
7926
ISO
ISO
ISO
7927-1
7928-1
7928-2
ISO
ISO
7929
7931
ISO
7932
ISO
7933
ISO
7934
ISO
7935
ISO
7936
ISO
ISO
ISO
ISO
7937
7938
7939
7941
ISO
7942-1
ISO
7942-2
ISO
7942-3
ISO
7942-4
Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 5: Machine sets in hydraulic power
generating and pumping plants Second Edition
Sweet Cherries and Sour Cherries - Guide to Cold Storage and Refrigerated Transport First Edition
Leeks - Guide to Cold Storage and Refrigerated Transport First Edition
Dried Oregano (Origanum Vulgare L.) - Whole or Ground Leaves - Specification Second Edition
Dehydrated Tarragon (Artemisia Dracunculus Linnaeus) - Specification First Edition
Fennel Seed, Whole or Ground (Powdered) - Part 1: Bitter Fennel Seed (Foeniculum Vulgare P. Miller Var. Vulgare) - Specification
First Edition
Savory - Specification - Part 1: Winter Savory (Satureja Montana Linnaeus) First Edition
Savory - Specification - Part 2: Summer Savory (Satureja Hortensis Linnaeus) First Edition
Information Processing - Magnetic Disk for Data Storage Devices - 83 000 Flux Transitions per Track, 130 mm (5.12 in) Outer
Diameter, 40 mm (1.57 in) Inner Diameter First Edition
Insulation Caps and Bushes for Resistance Welding Equipment First Edition
Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of presumptive Bacillus cereus Colony-count
technique at 30 C Third Edition
Ergonomics of the thermal environment Analytical determination and interpretation of heat stress using calculation of the predicted
heat strain Second Edition
Stationary Source Emissions - Determination of the Mass Concentration of Sulfur Dioxide - Hydrogen Peroxide/Barium
Perchlorate/Thorin Method First Edition; Amendment 1-7/1/1998
Stationary Source Emissions - Determination of the Mass Concentration of Sulphur Dioxide - Performance Characteristics of
Automated Measuring Methods First Edition
Hard Coal - Determination and Presentation of Float and Sink Characteristics - General Directions for Apparatus and Procedures
First Edition
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for Enumeration of Clostridium Perfringens - Colony-Count
Technique Third Edition
Aircraft - Ball Bearings for Control Cable Pulleys - Dimensions and Loads First Edition
Aircraft - Non-Metallic Pulleys with Ball Bearings for Control Cables - Dimensions and Loads First Edition
Commercial Propane and Butane - Analysis by Gas Chromatography First Edition
Information Technology - Computer Graphics and Image Processing - Graphical Kernel System (GKS) - Part 1: Functional
Description Second Edition; CEN ISO/IEC 7942-1: 1995
Information Technology - Computer Graphics and Image Processing - Graphical Kernel System (GKS) - Part 2: NDC Metafile First
Edition
Information Technology - Computer Graphics and Image Processing - Graphical Kernel Systems (GKS) - Part 3: Audit Trail First
Edition
Information Technology - Computer Graphics and Image Processing - Graphical Kernel System (GKS) - Part 4: Picture Part Archive
First Edition
ISO
7943-1
ISO
ISO
ISO
ISO
ISO
7943-2
7943-3
7944
7945
7946
ISO
ISO
ISO
ISO
7947
7948
7949
7950
ISO
7952
ISO
7953
ISO
ISO
7954
7957
ISO
7958
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7959
7960
7961
7963
7965-1
7965-2
7966
ISO
7967-1
ISO
7967-2
Photography - Overhead Projectors - Part 1: Projection Stages - Dimensions First Edition ANSI/PIMA IT7.220-1995(R1997)
Photography - Overhead Projectors - Part 2: Transparencies and Transparency Frames - Dimensions First Edition; (ANSI IT7.2121989)
Photography - Overhead Projectors - Part 3: Film Rolls, Cores and Winders - Dimensions First Edition
Optics and Optical Instruments - Reference Wavelengths Second Edition
Woodworking Machines - Single Spindle Boring Machines - Nomenclature and Acceptance Conditions First Edition
Woodworking Machines - Slot Mortising Machines - Nomenclature and Acceptance Conditions First Edition
Woodworking Machines - Two-, Three-and Four-Side Moulding Machines - Nomenclature and Acceptance Conditions First Edition
Woodworking Machines - Routing Machines - Nomenclature and Acceptance Conditions First Edition
Woodworking Machines - Veneer Pack Edge Shears - Nomenclature and Acceptance Conditions First Edition
Woodworking Machines - Single Chain Mortising Machines - Nomenclature and Acceptance Conditions First Edition
Fruits, Vegetables and Derived Products - Determination of Copper Content - Method Using Flame Atomic Absorption Spectrometry
First Edition
Manganese Ores and Concentrates - Determination of Calcium and Magnesium Contents - Flame Atomic Absorption Spectrometric
Method First Edition
Microbiology - General Guidance for Enumeration of Yeasts and Moulds - Colony Count Technique at 25 Degrees Celsius First
Edition; (PNS 579: 1992)
Woodworking Machines - Radial Circular Saws - Nomenclature and Acceptance Conditions First Edition
Woodworking Machines - Single Blade Stroke Circular Sawing Machines for Lengthwise Cutting of Solid Woods and Panels Nomenclature and Acceptance Conditions First Edition
Woodworking Machines - Double Edging Precision Circular Sawing Machines - Nomenclature and Acceptance Conditions First
Edition
Airborne Noise Emitted by Machine Tools - Operating Conditions for Woodworking Machines First Edition
Aerospace - Bolts - Test Methods First Edition
Non-destructive testing Ultrasonic testing Specification for calibration block No. 2 Second Edition
Packaging - Sacks - Drop Test - Part 1: Paper Sacks First Edition; (CEN EN 27965-1: 1992)
Sacks - Drop Test - Part 2: Sacks Made from Thermoplastic Flexible Film First Edition
Acceptance Control Charts First Edition
Reciprocating internal combustion engines Vocabulary of components and systems Part 1: Structure and external covers Moteurs
alternatifs Ó combustion interne Vocabulaire des composants et des syst×mes Partie 1: Structure du moteur et de ses capotages
Second Edition
Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems - Part 2: Main Running Gear Moteurs
Alternatifs A Combustion Interne-Vocabulaire Des Composants Et Des Systemes - Partie 2: Mecanismes Principaux First Edition;
Amendment 1 12/01/1999
ISO
7967-3
ISO
7967-4
Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems - Part 3: Valves, Camshaft Drive and
Actuating Mechanisms First Edition
Reciprocating internal combustion engines Vocabulary of components and systems Part 4: Pressure charging and air/exhaust gas
ducting systems Moteurs alternatifs Ó combustion interne Vocabulaire des composants et des syst×mes Partie 4: Compresseur et
circuits d'admission et d'Úchappement Second Edition
ISO
7967-5
Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems - Part 5: Cooling Systems Moteurs Alternatifs
a Combustion Interne - Vocabulaire des Composants et des Systemes - Partie 5: Systemes de Refroidissement Second Edition
ISO
7967-6
ISO
7967-7 CORR 1
Reciprocating internal combustion engines Vocabulary of components and systems Part 6: Lubricating systems Moteurs alternatifs
Ó combustion interne Vocabulaire des composants et des syst×mes Partie 6: Syst×mes de lubrification Second Edition
Reciprocating internal combustion engines ù Vocabulary of components and systems ù Part 7: Governing systems TECHNICAL
CORRIGENDUM 1 Moteurs alternatifs Ó combustion interne ù Vocabulaire des composants et des syst×mes ù Partie 7: Syst×mes
de rÚgulation RECTIFICATIF TECHNIQUE 1 Second Edition
ISO
7967-7
Reciprocating internal combustion engines ù Vocabulary of components and systems ù Part 7: Governing systems Moteurs
alternatifs Ó combustion interne ù Vocabulaire des composants et des syst×mes ù Partie 7: Syst×mes de rÚgulation Second Edition
ISO
7967-8
ISO
7967-9
ISO
ISO
7969
7970
ISO
7971-1
ISO
ISO
ISO
7971-2
7973
7975
ISO
7976-1
ISO
ISO
7976-2
7980
Reciprocating internal combustion engines Vocabulary of components and systems Part 8: Starting systems Moteurs alternatifs Ó
combustion interne Vocabulaire des composants et des syst×mes Partie 8: Syst×mes de dÚmarrage Third Edition
Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems - Part 9: Control and Monitoring Systems First
Edition
Manganese Ores and Concentrates - Determination of Sodium and Potassium Contents - Flame Atomic Absorption Spectrometric
Method First Edition
Wheat (Triticum Aestivum L.) - Specification Second Edition
Cereals Determination of bulk density, called ômass per hectolitreö Part 1: Reference method First Edition; Cancels and Replaces
ISO 7970: 1986
Cereals - Determination of Bulk Density, CalledMass per Hectolitre" - Part 2: Routine Method First Edition; (BS 4317: PT 32: 1996)
Replaces ISO 7971"
Cereals and Milled Cereal Products - Determination of the Viscosity of Flour - Method Using an Amylograph First Edition
Passenger Cars - Braking in a Turn - Open-loop Test Method Third Edition
Tolerances for Building - Methods of Measurement of Buildings and Building Products - Part 1: Methods and Instruments First Edition
Tolerances for Building - Methods of Measurement of Buildings and Building Products - Part 2: Position of Measuring Points First
Edition
Water Quality - Determination of Calcium and Magnesium - Atomic Absorption Spectrometric Method First Edition
ISO
7981-1
ISO
7981-2
ISO
7982-1
ISO
7983
ISO
7984
ISO
ISO
ISO
7986
7987
7988
ISO
7989-1
ISO
7989-2
ISO
ISO
ISO
7990
7991
7992
ISO
ISO
7995
7996
ISO
ISO
ISO
7998
8001
8002
ISO
8003
ISO
8004
ISO
8005
Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Part 1: Determination of six PAH by highperformance thinlayer chromatography with fluorescence detection after liquid-liquid extraction First Edition
Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Part 2: Determination of six PAH by highperformance
liquid chromatography with fluorescence detection after liquid-liquid extraction First Edition
Bank Telecommunication - Funds Transfer Messages - Part 1: Vocabulary and Universal Set of Data Segments and Data Elements
for Electronic Funds Transfer Messages Second Edition: Technical Corrigendum 1: 12/15/1999
Woodworking Machines - Single Blade Circular Sawing Machines with Travelling Table - Nomenclature and Acceptance Conditions
First Edition
Woodworking Machines - Technical Classification of Woodworking Machines and Auxiliary Machines for Woodworking First Edition
Hydraulic Fluid Power - Sealing Devices - Standard Test Methods to Assess the Performance of Seals Used in Oil Hydraulic
Reciprocating Applications First Edition
Woodworking Machines - Turning Lathes - Nomenclature and Acceptance Conditions First Edition
Woodworking Machines - Double-End Tenoning Machines - Nomenclature and Acceptance Conditions First Edition
Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 1: General principles First Edition; Together with ISO
7989-2, Cancels and Replaces ISO 7989:1988,
Steel wire and wire products ù Nonferrous metallic coatings on steel wire ù Part 2: Zinc or zinc-alloy coating First Edition
[Superseded: ISO 7989]
Manganese Ores and Concentrates - Determination of Total Iron Content - Titrimetric Method After Reduction and Sulfosalicylic Acid
Spectrophotometric Method First Edition; Replaces ISO R 313: 1963
Glass - Determination of Coefficient of Mean Linear Thermal Expansion First Edition
Iron Ores - Determination of Reduction Properties Under Load First Edition
Aerospace - Nuts, Hexagonal, Self-Locking, with MJ Threads, Classification 1 100 MPa (at Ambient Temperature)/235 Degrees
Celsius, 1 100 MPa(at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius Dimensions Third Edition
Ambient Air - Determination of the Mass Concentration of Nitrogen Oxides - Chemiluminescence Method First Edition
Optics and Optical Instruments - Spectacle Frames - Vocabulary and Lists of Equivalent Terms First Edition; (PNS 1243: 1994) (CEN
EN ISO 7998: 1996)
Cinematography - Underexposed Motion-Picture Film Requiring Forced Development - Designation Method First Edition
Mechanical Vibrations - Land Vehicles - Method for Reporting Measured Data First Edition
Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Measurement of Dynamic Viscosity First Edition
Carbonaceous Materials for the Production of Aluminium - Calcined Coke and Calcined Carbon Products - Determination of the
Density in Xylene - Pyknometric Method First Edition
Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content Second
Edition
ISO
8006
ISO
8007-1
ISO
8007-2
ISO
8007-3
ISO
8008
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8009
8013
8015
8016
8017
8018
8020
8022
Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Determination of Ash First Edition
Carbonaceous Materials Used in the Production of Aluminium - Sampling Plans and Sampling From Individual Units - Part 1:
Cathode Blocks First Edition
Carbonaceous Materials Used in the Production of Aluminium - Sampling Plans and Sampling From Individual Units - Part 2:
Prebaked Anodes First Edition
Carbonaceous materials used in the production of aluminium Sampling plans and sampling from individual units Part 3: Sidewall
blocks First Edition
Aluminium oxide primarily used for the production of aluminium Determination of specific surface area by nitrogen adsorption
Second Edition
Mechanical contraceptives Reusable natural and silicone rubber contraceptive diaphragms Requirements and tests First Edition;
Replaces ISO 8009-1, ISO 8009-2, ISO 8009-3, ISO 8009-4, ISO 8009-5, ISO 8009-6, ISO 8009-7, ISO 8009-8, ISO 8009-9 and ISO
8009-10
Rubber, vulcanized Determination of creep in compression or shear Second Edition
Technical Drawings - Fundamental Tolerancing Principle First Edition
Machinery for Agriculture - Wheels with Integral Hub First Edition
Tools for moulding ù Guide pillars, straight and shouldered, and locating guide pillars, shouldered Second Edition
Tools for moulding ù Guide bushes, headed, and locating guide bushes, headed Second Edition
Tools for Pressing - Punches with Cylindrical Head and Straight or Reduced Shank Third Edition
Surface Active Agents - Determination of Wetting Power by Immersion Second Edition
ISO
ISO
ISO
ISO
8026
8028
8029
8030
Agricultural Irrigation Equipment - Sprayers - General Requirements and Test Methods Second Edition; Amendment 1: 06-15-2000
Rubber and/or Plastics Hoses and Hose Assemblies for Airless Paint Spraying - Specification Second Edition
Plastics hose ù General-purpose collapsible water hose, textilereinforced ù Specification Second Edition
Rubber and Plastics Hoses - Method of Test for Flammability Second Edition
ISO
ISO
ISO
ISO
8031
8032
8033
8035
Rubber and Plastics Hoses and Hose Assemblies - Determination of Electrical Resistance Second Edition; (CEN EN 28031: 1993)
Rubber and Plastics Hose Assemblies - Flexing Combined with Hydraulic Impulse Test (Half-Omega Test) Second Edition
Rubber and plastics hoses Determination of adhesion between components Third Edition
Commercial Road Vehicles and Buses over 3,5 t - Front Towing Attachments First Edition
ISO
ISO
8036
8037-1
ISO
8037-2
ISO
8038-1
Optics and photonics Microscopes Immersion liquids for light microscopy First Edition;: 1998 [Replaced: ISO 8036-1, ISO 8036-1]
Optics and Optical Instruments - Microscopes - Slides - Part 1: Dimensions, Optical Properties and Marking First Edition
Optics and Optical Instruments - Microscopes - Slides - Part 2: Quality of Material, Standards of Finish and Mode of Packaging First
Edition; Technical Corrigendum 1: 11/01/2002
Optics and Optical Instruments - Microscopes - Screw Threads for Objectives and Related Nosepieces Part 1: Screw Thread Type
RMS (4/5 in x 1/36 in) First Edition
ISO
ISO
ISO
ISO
ISO
ISO
8038-2
8039
8040
8041
8042
8043
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8044
8048
8049
8050
8051
8052
8053
8054
ISO
8056-1
ISO
8056-2
ISO
8056-3
ISO
ISO
ISO
ISO
8056-4
8058
8061 AMD 1
8061
ISO
8062-1
ISO
8062-3
ISO
8063-1
ISO
8063-2
Optics and Optical Instruments - Screw Threads for Microscope Objectives and Related Nosepieces - Part 2: Screw Thread Type
M25 x 0,75 mm First Edition
Optics and Optical Instruments - Microscopes - Magnification First Edition
Optics and Optical Instruments - Microscopes - Dimensions of Tube Slide and Tube Slot Connections Second Edition
Human Response to Vibration - Measuring Instrumentation Second edition
Shock and Vibration Measurements - Characteristics to Be Specified for Seismic Pick-Ups First Edition
Oriental Leaf Tobacco - Determination of Form and Size Characteristics First Edition
Corrosion of Metals and Alloys - Basic Terms and Definitions Corrosion Des Metaux Et Alliages - Termes Principaux Et Definitions
Third Edition
Technical Drawings - Construction Drawings - Representation of Views, Sections and Cuts First Edition
Ferronickel Shot - Sampling for Analysis First Edition
Ferronickel Ingots or Pieces - Sampling for Analysis First Edition
Long Shank Taps with Nominal Diameters from M3 to M10 - Full-Diameter Shank Taps with Recess Second Edition
Mopeds - Direct Current Flasher Units Second Edition
Rubber and Latex - Determination of Copper Content - Photometric Method Second Edition
Rubber, Compounded or Vulcanized - Determination of Sulfide Sulfur Content - Iodometric Method Second Edition
Aircraft - Nickel-Chromium and Nickel-Aluminium Thermocouple Extension Cables - Part 1: Conductors - General Requirements and
Tests First Edition
Aircraft - Nickel-Chromium and Nickel-Aluminium Thermocouple Extension Cables - Part 2: Terminations - General Requirments and
Tests First Edition
Aircraft - Nickel-Chromium and Nickel-Aluminium Thermocouple Extension Cables - Part 3: Crimp-Type Ring Terminal Ends Dimensions First Edition
Aircraft - Nickel-Chromium and Nickel-Aluminium Thermocouple Extension Cables - Part 4: Crimp-Type Butt Connectors Dimensions First Edition
Air Cargo - Insulated Containers - Thermal Efficiency Requirements Second Edition
Alpine ski-bindings ù Selection of release torque values AMENDMENT 1 Third Edition
Alpine ski-bindings ù Selection of release torque values Third Edition
Geometrical product specifications (GPS) ù Dimensional and geometrical tolerances for moulded parts ù Part 1: Vocabulary
SpÚcification gÚomÚtrique des produits (GPS) ù TolÚrances dimensionnelles et gÚomÚtriques des pi×ces moulÚes ù Partie 1:
Vocabulaire First Edition [Replaced: ISO 8062]
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional
and geometrical tolerances and machining allowances for castings First Edition [Replaced: ISO 8062]
Information Processing - Data Interchange on 6,30 mm (0.25 in) Wide Magnetic Tape Cartridge Using IMFM Recording at 252 ftpmm
(6 400 ftpi) - Part 1: Mechanical, Physical and Magnetic Properties First Edition
Information Processing - Data Interchange on 6,30 mm (0.25 in) Wide Magnetic Tape Cartridge Using IMFM Recording at 252 ftpmm
(6 400 ftpi) - Part 2: Track Format and Method of Recording for Data Interchange in Start/Stop Mode First Edition
ISO
8064
ISO
ISO
8066-2
8067
ISO
ISO
8068
8069
ISO
8070
ISO
8072
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8073
8074
8075
8078
8079
8080
8081
ISO
8082
ISO
ISO
8083
8084
ISO
8085-1
ISO
8085-2
ISO
8085-3 CORR 1
ISO
ISO
ISO
8085-3
8086
8087
Information Processing - Reels for 12,7 mm (0.5 in) Wide Magnetic Tapes - Sizes 16, 18 and 22 First Edition; CEN EN 28064: 1993
Rubber and Plastics Hoses and Hose Assemblies for Automotive Air Conditioning - Specification - Part 2: Refrigerant 134a First
Edition
Flexible Cellular Polymeric Materials - Determination of Tear Strength First Edition; (CEN PREN 28067: 1994)
Lubricants, industrial oils and related products (class L) Family T (Turbines) Specification for lubricating oils for turbines Second
Edition
Dried milk - Determination of content of latic acid and lactates Second Edition
Milk and milk products - Determination of calcium, sodium, potassium and magnesium contents - Atomic absorption spectrometric
method Second Edition
Information Technology - Open Systems Interconnection - Transport Service Definition Third Edition; CAN/CSA-ISO/IEC 8072-95;
CEN EN ISO/IEC 8072: 1995
Information Technology - Open Systems Interconnection - Protocol for Providing the Connection-Mode Transport Service Fourth
Edition; Amendment 1-1998
Aerospace - Surface Treatment of Austenitic Stainless Steel Parts First Edition
Aerospace - Surface Treatment of Hardenable Stainless Steel Parts First Edition
Aerospace Process - Anodic Treatment of Aluminium Alloys - Sulfuric Acid Process, Undyed Coating First Edition
Aerospace Process - Anodic Treatment of Aluminium Alloys - Sulfuric Acid Process, Dyed Coating First Edition
Aerospace - Anodic Treatment of Titanium and Titanium Alloys - Sulfuric Acid Process First Edition
Aerospace Process - Chemical Conversion Coating for Aluminium Alloys - General Purpose First Edition
Self Propelled Machinery for Forestry - Roll-Over Protective Structures - Laboratory Tests and Performance Requirements Second
Edition
Machinery for Forestry - Falling-Object Protective Structures (FOPS) - Laboratory Tests and Performance Requirements Second
Edition
Machinery for forestry Operator protective structures Laboratory tests and performance requirements Second Edition
Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Metric Series - Specifications - Part 1:
Fittings for Socket Fusion Using Heated Tools First Edition
Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Metric Series - Specifications - Part 2: Spigot
Fittings for Butt Fusion, for Socket Fusion Using Heated Tools and for Use with Electrofusion Fittings First Edition; Corrigendum 1
12/01/2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels ù Metric series ù Specifications ù Part 3:
Electrofusion fittings TECHNICAL CORRIGENDUM 1 First Edition
Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Metric Series - Specifications - Part 3:
Electrofusion Fittings First Edition
Dairy Plant - Hygiene Conditions - General Guidance on Inspection and Sampling Procedures Second Edition
Mobile Cranes - Drum and Sheave Sizes First Edition
ISO
ISO
8088
8090
ISO
8092-1
ISO
8092-2
ISO
8092-3
ISO
ISO
ISO
ISO
ISO
8092-4
8093
8094
8095
8096 CORR 1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8096
8097
8098
8099
8106
8107
8109
ISO
ISO
8112
8113
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8114
8115
8115-2
8115-3
8116-1
8116-2
8116-3
ISO
8116-4
Equipment for Olive Cultivation and Olive Oil Production - Vocabulary First Edition
Cycles - Terminology First Edition
Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 1: Tabs for Single-Pole Connections - Dimensions and
Specific Requirements Second Edition
Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance
requirements Fourth Edition
Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 3: Tabs for Multi-Pole Connections - Dimensions and
Specific Requirements First Edition
Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 4: Pins for Single- and Multi-Pole Connections Dimensions and Specific Requirements First Edition
Road Vehicles - Diagnostic Testing of Electronic Systems First Edition
Steel Cord Conveyor Belts - Adhesion Strength Test of the Cover to the Core Layer First Edition; (CEN EN 28094: 1994)
PVC-Coated Fabrics for Tarpaulins - Specification First Edition
Rubber- or plastics-coated fabrics for water-resistant clothing ù Specification TECHNICAL CORRIGENDUM 1 First Edition
Rubber- or plastics-coated fabrics for water-resistant clothing ù Specification First Edition [Replaced: ISO 8096-1, ISO 8096-2, ISO
8096-3]
Aircraft - Minimum Airworthiness Requirements and Test Conditions for Certified Air Cargo Unit Load Devices Fourth Edition
Cycles - Safety Requirements for Bicycles for Young Children Second Edition
Small Craft - Toilet Waste Retention Systems Second Edition
Glass containers Determination of capacity by gravimetric method Test method Second Edition
Nuclear Power Plants - Maintainability - Terminology First Edition
Banking and Related Financial Services - Securities - Format of Eurobonds Second Edition
Caprolactam for Industrial Use - Determination of Colour of 50 % Aqueous Caprolactam Solution, Expressed in Hazen Units
(Platinum-Cobalt Scale) - Spectrometric Method First Edition
Glass Containers - Resistance to Vertical Load - Test Method Second Edition
Textile Machinery and Accessories - Spindles for Ring-Spinning and Doubling Machines - List of Equivalent Terms First Edition
Cotton Bales - Dimensions and Density First Edition
Bales - Part 2: Bales of Man-Made Staple Fibres - Dimensions First Edition
Bales - Part 3: Bales of Cotton - Packaging and Labelling First Edition
Textile Machinery and Accessories - Beams for Winding - Part 1: General Vocabulary Second Edition
Textile Machinery and Accessories - Beams for Winding - Part 2: Warper s Beams Second Edition
Textile Machinery and Accessories - Beams for Winding - Part 3: Weaver s Beams Second Edition;
Textile Machinery and Accessories - Beams for Winding - Part 4: Quality Classification of Flanges for Weaver s Beams, Warper s
Beams and Sectional Beams Second Edition
ISO
8116-5
Textile Machinery and Accessories - Beams for Winding - Part 5: Sectional Beams for Warp Knitting Machines Second Edition
ISO
8116-6
Textile Machinery and Accessories - Beams for Winding - Part 6: Beams for Ribbon Weaving and Ribbon Knitting Second Edition
ISO
8116-7
ISO
ISO
ISO
8116-8
8116-9
8117
ISO
8118-1
ISO
8118-2
ISO
ISO
ISO
ISO
8119-1
8119-2
8119-3
8121
Textile Machinery and Accessories - Beams for Winding - Part 7: Beams for Dyeing Silvers, Rovings and Yarns First Edition;
Textile Machinery and Accessories - Beams for Winding - Part 8: Definitions of Run-Out Tolerances and Methods of Measurement
First Edition
Textile Machinery and Accessories - Beams for Winding - Part 9: Dyeing Beams for Textile Fabrics First Edition
Textile Machinery - Knitting Machines - Nominal Diameters of Circular Machines Second Edition
Textile machinery - Weaving machine temples - Part 1: Temple cylinders First Edition; Together with ISO 8118-2:2006 replaces ISO
8118:1986
Textile machinery - Weaving machine temples - Part 2: Full-width temples First Edition; Together with ISO 8118-1:2006 replaces ISO
8118:1986
Textile Machinery and Accessories - Needles for Knitting Machines - Terminology - Part 1: Latch-Type Needles First Edition;
(Corrected and Reprinted - 1989)
Textile Machinery and Accessories - Needles for Knitting Machines - Terminology - Part 2: Bearded Needles First Edition
Textile Machinery and Accessories - Needles for Knitting Machines - Terminology - Part 3: Compound Needles First Edition
Textile machinery ù Knitting machines ù Nameplate information Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8122
8123
8124-1 AMD 2
8124-1 AMD 1
8124-1
8124-1 DAM 1
8124-2
8124-3
Textile Machinery - Knitting Machines - Number of Needles for Circular Knitting Machines of Large Nominal Diameter Second Edition
Road Vehicles - Diametral Pitch Starter Motor Pinions First Edition
Safety of Toys - Part 1: Saftey Aspects to Mechanical and Physical Properties AMENDMENT 2 First Edition
Safety of Toys - Part 1: Saftey Aspects to Mechanical and Physical Properties AMENDMENT 1 First Edition
Safety of Toys - Part 1: Saftey Aspects to Mechanical and Physical Properties First Edition
Safety of Toys - Part 1: Saftey Aspects to Mechanical and Physical Properties First Edition
Safety of Toys - Part 2: Flammability Second Edition
Safety of Toys - part 3: Migration of Certain Elements First Edition
ISO
ISO
8126
8127-1
ISO
8128-1
ISO
ISO
8128-2
8130-1
Micrographics - Duplicating Film, Silver, Diazo and Vesicular - Visual Density - Specifications and Measurement Second Edition
Micrographics - A6 Size Microfilm Jackets - Part 1: Five Channel Jacket for 16 mm Microfilm First Edition
Apple Juice, Apple Juice Concentrates and Drinks Containing Apple Juice - Determination of Patulin Content - Part 1: Method Using
High-Performance Liquid Chromatography First Edition
Apple Juice, Apple Juice Concentrates and Drinks Containing Apple Juice - Determination of Patulin Content - Part 2: Method Using
Thin-Layer Chromatography First Edition
Coating Powders - Part 1: Determination of Particle Size Distribution by Sieving First Edition
ISO
ISO
ISO
ISO
8130-2
8130-3
8130-4
8130-5
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8130-6
8130-7
8130-8
8130-9
8130-10
8130-11
8130-12
8130-13
8130-14
8131
ISO
8132
ISO
8133
Coating Powders - Part 2: Determination of Density by Gas Comparison Pyknometer (Refree Method) First Edition
Coating Powders - Part 3: Determination of Density by Liquid Displacement Pyknometer First Edition
Coating Powders - Part 4: Calculation of Lower Explosion Limit First Edition; Corrigendum 1: 1993
Coating Powders - Part 5: Determination of Flow Properties of a Powder/Air Mixture First Edition
Coating Powders - Part 6: Determination of Gel Time of Thermosetting Coating Powders at a Given Temperature First Edition;
Amendment 1-1998
Coating Powders - Part 7: Determination of Loss of Mass on Stoving First Edition
Coating Powders - Part 8: Assessment of the Storage Stability of Thermosetting Powders First Edition
Coating Powders - Part 9: Sampling First Edition
Coating Powders - Part 10: Determination of Deposition Efficiency First Edition
Coating Powers - Part 11: Inclined-Plane Flow Test First Edition
Coating Powders - Part 12: Determination of Compatibilty First Edition
Coating Powders - Part 13: Particle Size Analysis by Laser Diffraction First Edition
Coating Powders - Part 14: Terminology First Edition
Hydraulic Fluid Power - Single Rod Cylinders, 16 MPa (160 Bar) Compact Series - Tolerances Second Edition
Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series Mounting dimensions for
accessories Second Edition; Supersedes IS0 8132: 1996, ISO 6981: 1992 and ISO 6982: 1992
Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) compact series Mounting dimensions for accessories Second Edition;
Supersedes ISO 6982: 1995 and ISO 8138: 1998
ISO
8135
Hydraulic Fluid Power - Single Rod Cylinders, 16 MPa (160 Bar) Medium and 25 MPa (250 Bar) Series - Tolerances Second Edition
ISO
ISO
ISO
8139
8140
8142
ISO
8144-1
ISO
ISO
ISO
ISO
ISO
8144-2
8145
8146
8147
8148
Pneumatic Fluid Power - Cylinders, 1 000 kPa (10 Bar) Series - Rod End Spherical Eyes - Mounting Dimensions Second Edition
Pneumatic Fluid Power - Cylinders, 1 000 kPa (10 Bar) Series - Rod End Clevis - Mounting Dimensions Second Edition
Thermal Insulation - Bonded Preformed Man-Made Mineral Fibre Pipe Sections - Specification First Edition
Thermal Insulation - Mineral Wool Mats for Ventilated Roof Spaces - Part 1: Specification for Applications with Restricted Ventilation
First Edition
Thermal Insulation - Mineral Wool Mats for Ventilated Roof Spaces - Part 2: Specification for Horizontal Applications with Unrestricted
Ventilation First Edition
Thermal Insulation - Mineral Wool Board for Overdeck Insulation of Roofs - Specification First Edition
Shipbuilding and Marine Structures - Oval Eyeplates First Edition
Shipbuilding and Marine Structures - Derrick Rigs and Component Parts - Vocabulary First Edition
Shipbuilding and Marine Structures - Derrick Boom Headfittings - Fixed Type First Edition
ISO
ISO
8151
8152
Dried Milk - Determination of Nitrate Content - Method by Cadmium Reduction and Spectrometry (Screening Method) First Edition
Earth-Moving Machinery - Operation and Maintenance - Training of Mechanics First Edition
ISO
ISO
ISO
ISO
8156
8157
8159
8160
Dried milk and dried milk products - Determination of insolubility index Second Edition; IDF 129
Fertilizers and Soil Conditioners - Vocabulary First Edition
Textiles - Morphology of Fibres and Yarns - Vocabulary First Edition
Textiles - Textured Filament Yarns - Vocabulary First Edition
Water Quality - Determination of Selected Monovalent Phenols - Part 1: Gas-Chromatographic Method After Enrichment by
Extraction First Edition
ISO
8165-1
ISO
8165-2
ISO
ISO
8166
8167
ISO
ISO
8168
8169
ISO
ISO
8174
8177
ISO
8178-1
ISO
8178-2
ISO
8178-3
ISO
8178-4
ISO
8178-5
ISO
8178-6
Water Quality - Determination of Selected Monovalent Phenols - Part 2: Method by Derivation and Gas Chromatography First Edition
Resistance Welding - Procedure for the Evaluation of the Life of Spot Welding Electrodes Using Constant Machine Settings First
Edition
Projections for Resistance Welding First Edition
Aerospace - Corrosion- and Heat-Resisting Steel Bolts with Strength Classification 1 100 MPa and MJ Threads - Procurement
Specification First Edition
Equipment for Crop Protection - Sprayers - Connecting Dimensions for Nozzles and Manometers First Edition
Ethylene and Propylene for Industrial Use - Determination of Acetone, Acetonitrile, Propan-2-ol and Methanol - Gas Chromatographic
Method First Edition
Aerospace - Omega Clamps (Saddle Clamps) for Fluid Systems - Dimensions Second Edition
Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement of gaseous and
particulate exhaust emissions Second Edition
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 2: Measurement of Gaseous and Particulate
Exhaust Emissions at Site First Edition CEN EN ISO 8178-2: 1996
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 3: Definitions and Methods of Measurement of
Exhaust Gas Smoke Under Steady-State Conditions First Edition
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 4: Test Cycles for Different Engine Applications
First Edition CEN EN ISO 8178-4: 1996
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 5: Test Fuels First Edition; Corrected and
Reprinted 05/15/1998
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 6: Report of Measuring Results and Test First
Edition
ISO
8178-7
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 7: Engine Family Determination First Edition
ISO
8178-8
ISO
8178-9
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 8: Engine Group Determination First Edition
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 9: Test Cycles and Test Procedures for TestBed Measurement of Exhaust Gas Smoke Emissions from Compression Ignition Engines Operating Under Transient Conditions First
Edition; Amendment 1: 10/15/2004
ISO
8178-10
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8178-11
8179-1
8179-2
8180
8185
8186
8188
ISO
8191-1
ISO
8191-2
ISO
ISO
8192
8193
ISO
8194
ISO
8196-1
ISO
ISO
ISO
ISO
8196-2
8197
8199
8201
ISO
8205-1
ISO
ISO
ISO
8205-2
8205-3
8206
ISO
8207
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 10: Test Cycles and Test Procedures for Field
Measurement of Exhaust Gas Smoke Emissions from Compression Ignition Engines Operating Under Transient Conditions First
Edition
Reciprocating internal combustion engines Exhaust emission measurement Part 11: Test-bed measurement of gaseous and
particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions First Edition
Ductile iron pipes External zinc-based coating Part 1: Metallic zinc with finishing layer Second Edition
Ductile Iron Pipes - External Zinc Coating - Part 2: Zinc Rich Paint with Finishing Layer First Edition;
Ductile iron pipelines Polyethylene sleeving for site application Second Edition
Respiratory tract humidifiers for medical use - Particular requirements for respiratory humidification systems Third Edition
Ambient Air - Determination of the Mass Concentration of Carbon Monoxide - Gas Chromatographic Method First Edition
Textile Machinery and Accessories - Pitches of Knitting Machines Second Edition
Furniture - Assessment of the Ignitability of Upholstered Furniture - Part 1: Ignition Source: Smouldering Cigarette First Edition; (CEN
EN 1021-1: 1993)
Furniture - Assessment of Ignitability of Upholstered Furniture - Part 2: Ignition Source: Match-Flame Equivalent First Edition; (CEN
EN 1021-2: 1993)
Water quality ù Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation Second
Edition
Shipbuilding - Shell Plating Information First Edition
Radiation Protection - Clothing for Protection Against Radioactive Contamination - Design, Selection, Testing and Use First Edition
Milk - Definition and Evaluation of the Overall Accuracy of Indirect Methods of Milk Analysis - Part 1: Analytical Attributes of Indirect
Methods First Edition
Milk - Definition and Evaluation of the Overall Accuracy of Indirect Methods of Milk Analysis - Part 2: Calibration and Quality Control in
the Dairy Laboratory First Edition
Milk and Milk Products - Sampling - Inspection by Variables First Edition
Water quality General guidance on the enumeration of micro-organisms by culture Second Edition
Acoustics - Audible Emergency Evacuation Signal First Edition
Water-Cooled Secondary Connection Cables for Resistance Welding - Part 1: Dimensions and Requirements for Double-Conductor
Connection Cables Second Edition
Water-Cooled Secondary Connection Cables for Resistance Welding - Part 2: Dimensions and Requirements for Single-Conductor
Connection Cables Second Edition
Water-Cooled Secondary Connection Cables for Resistance Welding - Part 3: Test Requirements First Edition
Acceptance Tests for Oxygen Cutting Machines - Reproducible Accuracy - Operational Characteristics First Edition
Gas Welding Equipment - Specification for Hose Assemblies for Equipment for Welding, Cutting and Allied Processes First Edition
ISO
ISO
8208
8210
Information Technology - Data Communications - X.25 Packet Layer Protocol for Data Terminal Equipment Fourth Edition
Equipment for Harvesting - Combine Harvesters - Test Procedure First Edition
ISO
ISO
8211
8212
ISO
ISO
ISO
ISO
8213
8214
8215
8216-1
ISO
ISO
ISO
ISO
ISO
8216-2
8216-3
8216-99
8217
8218
ISO
8220
ISO
8222
ISO
ISO
8224-1
8224-2
ISO
8226-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8226-2
8229
8230
8232
8233
8239
8242
8243
ISO
8245
Information Processing - Specification for a Data Descriptive File for Information Interchange Second Edition; AS/NZS 3654: 1996
Soaps and Detergents - Techniques of Sampling During Manufacture First Edition
Chemical Products for Industrial Use - Sampling Techniques - Solid Chemical Products in the Form of Particles Varying from
Powders to Coarse Lumps First Edition
Surface Active Agents - Washing Powders - Determination of Inorganic Sulfates - Gravimetric Method First Edition
Surface Active Agents - Washing Powders - Determination of Total Silica Content - Gravimetric Method First Edition
Petroleum products Fuels (class F) classification Part 1: Categories of marine fuels Third Edition
Petroleum Products - Fuels (Class F) - Classification - Part 2: Categories of Gas Turbine Fuels for Industrial and Marine Applications
First Edition
Petroleum Products - Fuels (Class F) - Classification - Part 3: Family L (Liquefied Petroleum Gases) First Edition
Petroleum Products - Fuels (Class F) - Classifications - Part 99: General First Edition; Replaces ISO 8216-0
Petroleum products - Fuels (class F) - Specifications of marine fuels Third Edition
Road Vehicles - Levelling Devices for Headlamp Dipped Beam First Edition
Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of the Fine Particle Size Distribution (Less Than 60
Micrometer) - Method Using Electroformed Sieves First Edition
Petroleum measurement systems Calibration Temperature corrections for use when calibrating volumetric proving tanks Second
Edition
Traveller irrigation machines Part 1: Operational characteristics and laboratory and field test methods Second Edition; Corrected
version: 02/15/2004
Traveller Irrigation Machines - Part 2: Softwall Hose and Couplings - Test Methods First Edition
Paper and Board - Measurement of Hygroexpansivity - Part 1: Hygroexpansivity up to a Maximum Relative Humidity of 68 % Second
Edition
Paper and Board - Measurement of Hygroexpansivity - Part 2: Hygroexpansivity up to a Maximum Relative Humidity of 86 % First
Edition
Operations and Baths Relating to Dry-Cleaning Machines - Vocabulary First Edition
Safety Requirements for Dry-Cleaning Machines Using Perchloroethylene First Edition
Closed-Circuit Dry-Cleaning Machines - Defining and Checking of Machine Characteristics First Edition
Thermoplastics Valves - Torque - Test Method First Edition; (Corrected and Reprinted - 1989)
Sewing Machine Needles - Fitting Dimensions - Tolerances and Combinations First Edition
Polypropylene (PP) Valves for Pipes Under Pressure - Basic Dimensions - Metric Series First Edition
Cigarettes - Sampling Fourth Edition
Water Quality - Guidelines for the Determination of Total Organic Carbon (TOC) and Dissolved Organic Carbon (DOC) Second
Edition
ISO
8248
Windows and Door Height Windows - Mechanical Tests First Edition
Welding - Determination of Ferrite Number (FN) in Austenitic and Duplex Ferritic-Austenitic Cr-Ni Stainless Steel Weld Metals
Second Edition
Anodized Aluminium and Aluminium Alloys - Measurement of Wear Resistance and Wear Index of Anodic Oxide Coatings with an
Abrasive Wheel Wear Test Apparatus First Edition; (Corrected and Reprinted - 1989)
Anodized Aluminium and Aluminium Alloys - Measurement of Mean Specific Abrasion Resistance of Anodic Oxidation Coatings with
an Abrasive Jet Test Apparatus First Edition
ISO
8249
ISO
8251
ISO
8252
ISO
8253-1
Acoustics - Audiometric Test Methods - Part 1: Basic Pure Tone Air and Bone Conduction Threshold Audiometry First Edition
ISO
ISO
8253-2
8253-3
Acoustics - Audiometric Test Methods - Part 2: Sound Field Audiometry with Pure Tone and Narrow-Band Test Signals First Edition
Acoustics - Audiometric Test Methods - Part 3: Speech Audiometry First Edition
ISO
8254-1
Paper and Board - Measurement of Specular Gloss - Part 1: 75 Degree Gloss with a Converging Beam, TAPPI Method First Edition
ISO
ISO
8254-2
8254-3
ISO
8255-1
ISO
ISO
8255-2
8256
ISO
8257-1
ISO
ISO
8257-2
8258
ISO
8261
ISO
8262-1
ISO
8262-2
ISO
ISO
8262-3
8263
Paper and Board - Measurement of Specular Gloss - Part 2: 75 Degress Gloss with a Parallel Beam, DIN Method First Edition
Paper and board Measurement of specular gloss Part 3: 20 gloss with a converging beam, TAPPI method First Edition
Optics and Optical Instruments - Microscopes - Cover Glasses - Part 1: Dimensional Tolerances, Thickness and Optical Properties
First Edition
Optics and Optical Instruments - Microscopes - Cover Glasses - Part 2: Quality of Materials, Standards of Finish and Mode of
Packaging First Edition
Plastics - Determination of Tensile-Impact Strength Second Edition
Plastics - Poly(Methyl Methacrylate) (PMMA) Moulding and Extrusion Materials - Part 1: Designation System and Basis for
Specifications Second Edition
Plastics - Poly(Methyl Methacrylate) (PMMA) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and
Determination of Properties Second Edition; Corrected Version 11/01/2003
Shewhart Control Charts (AS/NZS 3944: 1993) First Edition; Corrigendum 1: 1993
Milk and Milk Products - General Guidance for the Preparation of Test Samples,Initial Suspensions and Decimal Dilutions for
Microbiological Examination Second Edition; IDF 122:2001
Milk products and milk-based foods - Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method) Part 1: Infant foods Second Edition
Milk products and milk-based foods - Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method) Part 2: Edible ices and ice-mixes Second Edition
Milk Products and Milk-Based Foods - Determination of Fat Content by the Weibull-Berntrop Gravimetric Method (Reference Method)
- Part 3: Special Cases Second Edition
Iron Ore Fines - Method for Presentation of the Results of Sintering Tests First Edition; (Corrected and Reprinted - 1993)
ISO
8264
Hard Coal - Determination of the Swelling Properties Using a Dilatometer First Edition
Water Quality - Design and Use of Quantitative Samplers for Benthic Macro-Invertebrates on Stony Substrata in Shallow Freshwaters
First Edition; (CEN EN 28265: 1994)
ISO
8265
ISO
8267-1
Aircraft Tow bar attachment fittings interface requirements Part 1: Main line aircraft First Edition; Supersedes ISO 8267:1997
ISO
ISO
ISO
ISO
ISO
ISO
8267-2
8268
8269
8270
8271
8272
ISO
ISO
ISO
ISO
ISO
8273
8274
8275
8277
8278
ISO
ISO
ISO
8279
8280
8282
ISO
8283-1
ISO
8283-2
ISO
8283-3
ISO
8283-4
ISO
8287
ISO
8288
Aircraft Tow bar attachment fittings interface requirements Part 2: Regional aircraft First Edition; Supersedes ISO 8267:1997
Air Cargo Equipment - Automobile Transport Devices - Basic Requirements First Edition
Doorsets - Static Loading Test First Edition
Doorsets - Soft Heavy Body Impact Test First Edition
Door Leaves - Determination of the resistance to hard body impact Second Edition
Doorsets - Air Permeability Test First Edition
Doors and Doorsets - Standard Atmospheres for Testing the Performance of Doors and Doorsets Placed Between Different Climates
First Edition; (PNS 657: 1990)
Windows and doors Resistance to repeated opening and closing Test method Second Edition
Doorsets - Vertical Load Test First Edition
Shipbuilding - Pipework - Information Transfer First Edition
Aerospace - Hydraulic, Pressure Compensated, Variable Delivery Pumps - General Requirements First Edition
Aerospace - Nuts, Hexagonal, Plain, Nrml Ht., Nrml Across Flats, with MJ Threads, Cls: 600 MPa (at Ambt T)/120 Dgs. C, 600 MPa
(at Ambt T)/235 Dgs. C, 900 MPa (at Ambt T)/425 Dgs. C, 1 100 MPa (at Ambt T)/235 Dgs. C, 1 100 MPa (at Ambt T)/315 Dgs. C, 1
100 MPa (at Ambt T)/650 Degs. C, 1 210 MPa (at Ambt T)/730 Degs. C, 1 250 MPa (at Ambt T)/235 Dgs. C and 1 550 MPa (at Ambt
T)/600 Dgs. C - Dims. Second Edition
Aerospace - Rivets, Solid, Universal Head, Metallic Material, with or without Surface Treatment - Dimensions First Edition
Dental Equipment - Mercury and Alloy Mixers and Dispensers First Edition
Plastics Pipes and Fittings - Dimensions of Sockets and Spigots for Discharge Systems Inside Buildings - Part 1: Unplasticized
Poly(Vinyl Chloride) (PVC-U) and Chlorinated Poly(Vinyl Chloride) (PVC-C) First Edition
Plastics Pipes and Fittings - Dimensions of Sockets and Spigots for Discharge Systems Inside Buildings - Part 2: Polyethylene (PE)
First Edition
Plastics Pipes and Fittings - Dimensions of Sockets and Spigots for Discharge Systems Inside Buildings - Part 3: Polypropylene (PP)
First Edition
Plastics Pipes and Fittings - Dimensions of Sockets and Spigots for Discharge Systems Inside Buildings - Part 4:
Acrylonitrile/Butadiene/ Styrene (ABS) First Edition
Magnesium and Magnesium Alloys - Unalloyed Magnesium - Chemical Composition Second Edition; This Second Edition Cancels
and Replaces the First Edition ISO 8287: 1984,
Water Quality - Determination of Cobalt, Nickel, Copper, Zinc, Cadmium and Lead - Flame Atomic Absorption Spectrometric Methods
First Edition
ISO
ISO
ISO
8289
8290
8291
Vitreous and Porcelain Enamels - Low Voltage Test for Detecting and Locating Defects Second Edition
Vitreous and Porcelain Enamels - Determination of Resistance to Sulfuric Acid at Room Temperature Second Edition
Vitreous and Porcelain Enamels - Method of Test of Self-Cleaning Properties First Edition
ISO
8292
ISO
ISO
ISO
8294
8295
8296
ISO
8297
ISO
8298
ISO
8299
Animal and Vegetable Fats and Oils - Determination of Solid Fat Content - Pulsed Nuclear Magnetic Resonance Method First Edition
Animal and Vegetable Fats and Oils - Determination of Copper, Iron and Nickel Contents - Graphite Furnace Atomic Absorption
Method First Edition
Plastics - Film and Sheeting - Determination of the Coefficients of Friction Second Edition
Plastics - Film and Sheeting - Determination of Wetting Tension Second Edition
Acoustics - Determination of Sound Power Levels of Multisource Industrial Plants for Evaluation of Sound Pressure Levels in the
Environment - Engineering Method First Edition
Nuclear Fuel Technology - Determination of Milligram Amounts of Plutonium in Nitric Acid Solutions - Potentiometric Titration with
Potassium Dichromate after Oxidation by Ce(IV) and Reduction by Fe(II) Second Edition
Nuclear fuel technology Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in
nitric acid solutions by thermal-ionization mass spectrometry Second Edition
ISO
8300
ISO
8301
ISO
ISO
ISO
ISO
ISO
8302
8303
8304
8307
8308
ISO
8310
ISO
ISO
ISO
8311
8312
8314
ISO
8316
ISO
ISO
8317 CORR 1
8317
Determination of Plutonium Content in Plutonium Dioxide (PuO2) of Nuclear Grade Quality - Gravimetric Method First Edition
Thermal Insulation - Determination of Steady- State Thermal Resistance and Related Properties - Heat Flow Meter Apparatus First
Edition;
Thermal Insulation - Determination of Steady-State Thermal Resistance and Related Properties - Guarded Hot Plate Apparatus First
Edition
Shipbuilding - Shipborne Barges, Series 3 - Main Operational and Technical Requirements First Edition
Shipbuilding - Shipborne Barges, Series 3 - Ventilation System - Principal Mating Dimensions First Edition
Flexible Cellular Polymeric Materials - Determination of Resilience First Edition
Rubber and plastics hoses and tubing Determination of transmission of liquids through hose and tubing walls Third Edition
Refrigerated Light Hydrocarbon Fluids - Measurement of Temperature in Tanks Containing Liquefied Gases - Resistance
Thermometers and Thermocouples First Edition
Refrigerated Light Hydrocarbon Fluids - Calibration of Membrane Tanks and Independent Prismatic Tanks in Ships - Physical
Measurement First Edition; (CEN EN ISO 8311: 1995)
Rubber Compounding Ingredients - Stearic Acid - Definition and Test Methods First Edition
Shipbuilding and Marine Structures - Trunnion Pieces for Span Bearings and Lead Block Bearings First Edition
Measurement of Liquid Flow in Closed Conduits - Method by Collection of the Liquid in a Volumetric Tank First Edition CEN EN ISO
8316: 1995
Child-resistant packaging ù Requirements and testing procedures for reclosable packages TECHNICAL CORRIGENDUM 1 Second
Edition
Child-resistant packaging ù Requirements and testing procedures for reclosable packages Second Edition
ISO
8318
ISO
8319-1
ISO
ISO
ISO
8319-2
8323
8325
ISO
8326
ISO
8327-1
ISO
ISO
ISO
ISO
ISO
ISO
8327-2
8330
8331
8332
8333
8334
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8335
8336
8339
8340
8343
8348
8349
8351-1
8351-2
8356
8358
8359
8361-1
ISO
8361-2
Packaging - Complete, Filled Transport Packages and Unit Laods - Sinusoidal Vibration Tests Using a Variable Frequency Second
Edition
Orthopaedic Instruments - Drive Connections - Part 1: Keys for Use with Screws with Hexagon Socket Heads Second Edition;
(CAN/CSA-Z310.16-M91)
Orthopaedic Instruments - Drive Connections - Part 2: Screwdrivers for Single Slot Head Screws, Screws with Cruciate Slot and
Cross-Recessed Head Screws First Edition; (CAN/CSA-Z310.17-M91)
Freight Containers - Air/Surface (Intermodal) General Purpose Containers - Specification and Tests First Edition
Dentistry Test methods for rotary instruments Second Edition
Information Technology - Open Systems Interconnection - Session Service Definition Second Edition; Amendment 1: 10/01/1998;
Amendment 2: 12/15/1998; Corrigendum 1: 5/15/2002
Information Technology - Open Systems Interconnection - Connection-Oriented Session Protocol: Protocol Specification Second
Edition; Amendment 1: Efficiency Enhancements: 10-01-1998; Amendment 2: Nested Connections Functional Unit: 12-15-1998;
Corrigendum 1 5/15/2002
Information Technology - Open Systems Interconnection - Connection-Oriented Session Protocol: Protocol Implementation
Conformance Statement (PICS) Proforma First Edition
Rubber and Plastics Hoses and Hose Assemblies - Vocabulary Second Edition
Rubber and plastics hoses and hose assemblies ù Guidelines for selection, storage, use and maintenance Second Edition
Rubber Compounding Ingredients - Sulfur - Methods of Test Third Edition
Liquid Flow Measurement in Open Channels by Weirs and Flumes - V-Shaped Broad-Crested Weirs First Edition
Forestry machinery ù Portable chainsaws ù Determination of balance and maximum holding moment Second Edition
Cement-Bonded Particleboards - Boards of Portland or Equivalent Cement Reinforced with Fibrous Wood Particles First Edition
Fibre-cement flat sheets First Edition; Amendment 1: 10/15/2004; Corrigendum 1: 05/15/2005
Building construction Sealants Determination of tensile properties (Extension to break) Second Edition
Building construction Sealants Determination of tensile properties at maintained extension Second Edition
Ferronickel - Determination of Silicon Content - Gravimetric Method First Edition
Information Technology - Open Systems Interconnection - Network Service Definition Third Edition
Road Vehicles - Measurement of Road Surface Friction First Edition
Packaging - Method of Specification for Sacks - Part 1: Paper Sacks First Edition
Packaging - Method of Specification for Sacks - Part 2: Sacks Made from Thermoplastic Flexible Film First Edition
Road Vehicles - Diesel Engines - Screw-In Injector, Type 22 First Edition
Solid Fertilizers - Preparation of Samples for Chemical and Physical Analysis First Edition
Oxygen Concentrators for Medical Use - Safety Requirements Second Edition
Thermoplastics Pipes and Fittings - Water Absorption - Part 1: General Test Method First Edition
Thermoplastics Pipes and Fittings - Water Absorption - Part 2: Test Conditions for Unplasticized Poly(Vinyl Chloride) (PVC-U) Pipes
and Fittings First Edition
Thermoplastics Pipes and Fittings - Water Absorption - Part 3: Test Conditions for Acrylonitrile/Butadiene/ Styrene (ABS) Pipes and
Fittings First Edition
Injection Containers and Accessories - Part 1: Injection Vials Made of Glass Tubing Second Edition
ISO
ISO
8361-3
8362-1
ISO
ISO
ISO
ISO
8362-2
8362-3
8362-4
8362-5
ISO
8362-6
ISO
ISO
ISO
8362-7
8364
8367-1
ISO
8367-2
ISO
ISO
ISO
ISO
8368
8370-1
8370-2
8371
ISO
ISO
ISO
8373
8374
8375
ISO
8378-1
ISO
8378-2
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on Both Sides - Part 1: Dimensional, Physical and Magnetic Characteristics First Edition
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on Both Sides - Part 2: Track Format A First Edition
ISO
ISO
ISO
ISO
8378-3
8379
8380
8381
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on Both Sides - Part 3: Track Format B Second Edition; CAN/CGSB-186.12-93
Rough Terrain Trucks - Stability Tests Amendment 1 11/15/2001
Forestry Machinery - Portable Brush-Cutters and Grass-Trimmers - Cutting Attachment Guard Strength Second Edition
Milk-Based Infant Foods - Determination of Fat Content - Gravimetric Method (Reference Method) Second Edition
Injection Containers for Injectables and Accessories - Part 2: Closures for Injection Vials First Edition; (CEN EN 28362-2: 1993)
Injection Containers and Accessories - Part 3: Aluminium Caps for Injection Vials Second Edition
Injection containers and accessories Part 4: Injection vials made of moulded glass Second Edition
Injection Containers for Injectables and Accessories - Part 5: Freeze Drying Closures for Injection Vials First Edition
Injection Containers for Injectables and Accessories - Part 6: Caps Made of Aluminium-Plastics Combinations for Injection Vials First
Edition
Injection containers and accessories Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics
part Second Edition
Alpine skis and bindings ù Binding mounting area ù Requirements and test methods Fourth Edition
Packaging - Dimensional Tolerances for General Purpose Sacks - Part 1: Paper Sacks First Edition
Packaging - Dimensional Tolerances for General Purpose Sacks - Part 2: Sacks Made from Thermoplastic Flexible Film First Edition
Hydrometric Determinations - Flow Measurements in Open Channels Using Structures - Guidelines for Selection of Structure Second
Edition
Belt Drives - Dynamic Test to Determine Pitch Zone Location - Part 1: V-Belts First Edition
Belt Drives - Dynamic Test to Determine Pitch Zone Location - Part 2: V-Ribbed Belts First Edition
Iron Ores - Determination of Decrepitation Index First Edition
Manipulating Industrial Robots - Vocabulary (CEN EN ISO 8373: 1996) First Edition; Amendment 1: 1996; Corrigendum 1: 1996
Photography - Determination of ISO Safelight Conditions Second Edition
Solid Timber in Structural Sizes - Determination of Some Physical and Mechanical Properties First Edition
ISO
8383
ISO
ISO
8384
8388
ISO
8391-1
ISO
ISO
8391-2
8394
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8395
8397
8398
8399-1
8399-2
8400
8401
8404
8405
8406
8407
8419
8420 CORR 1
8420
8421-1
8421-2
8421-3
8421-4
8421-5
8421-6
8421-7
ISO
ISO
8421-8
8422
ISO
8424
Lifts on Ships - Specific Requirements First Edition; (Corrected and Reprinted - 1991)
Shipbuilding and Marine Technology - Dredgers - Vocabulary Navires Et Technology Maritime - Dragues - Vocabulaire Second
Edition
Knitted Fabrics - Types - Vocabulary Etoffes A Mailles - Types - Vocabulaire First Edition
Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 1: Method of Test First Edition; (PNS 1031-1: 1992)
Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible Limits First Edition; (PNS 1031-2:
1992)
Building Construction - Jointing Products - Determination of Extrudability of One-Component Sealants First Edition
Cinematography - Test Films for the Reproduction of 70 mm Motion-Picture Release Prints with Magnetic Stripes - Specifications
First Edition
Solid Fertilizers and Soil Conditioners - Test Sieving Second Edition; (CEN EN 1235: 1995)
Solid Fertilizers - Measurement of Static Angle of Repose First Edition
Aerospace - Accessory Drives and Mounting Flanges (Metric Series) - Part 1: Design Criteria First Edition
Aerospace - Accessory Drives and Mounting Flanges (Metric Series) - Part 2: Dimensions First Edition
Cinematography - Position of Emulsion Surface of 16 mm Motion-Picture Prints - Identification First Edition
Metallic Coatings - Review of Methods of Measurement of Ductility First Edition; (CEN EN ISO 8401: 1994)
Tools for moulding Angle pins Second Edition
Tools for Moulding - Ejector Sleeves with Cylindrical Head - Basic Series for General Purposes Second Edition
Tools for Moulding - Mould Bases - Round Locating Elements and Spacers Second Edition
Corrosion of Metals and Alloys - Removal of Corrosion Products from Corrosion Test Specimens First Edition
Belt Drives - Narrow V-Belts - Sections 9N/J, 15N/J and 25N/J (Lengths in the Effective System) Third Edition
Animal and vegetable fats and oils ù Determination of content of polar compounds Second Edition
Animal and vegetable fats and oils ù Determination of content of polar compounds Second Edition
Fire Protection - Vocabulary - Part 1: General Terms and Phenomena of Fire First Edition; (PNS 611-1: 1991)
Fire Protection - Vocabulary - Part 2: Structural Fire Protection First Edition; (PNS 611-2: 1991)
Fire Protection - Vocabulary - Part 3: Fire Detection and Alarm First Edition
Fire Protection - Vocabulary - Part 4: Fire Extinction Equipment First Edition
Fire Protection - Vocabulary - Part 5: Smoke Control First Edition
Fire Protection - Vocabulary - Part 6: Evacuation and Means of Escape First Edition
Fire Protection - Vocabulary - Part 7: Explosion Detection and Suppression Means First Edition
Fire Protection - Vocabulary - Part 8: Terms Specific to Fire-Fighting, Rescue Services and Handling Hazardous Materials First
Edition
Sequential sampling plans for inspection by attributes Second Edition
Raw Optical Glass - Resistance to Attack by Aqueous Acidic Solutions at 25 Degrees C - Test Method and Classification Second
Edition
ISO
ISO
ISO
ISO
ISO
8425
8426
8429
8430-1
8430-2
Determination of Plutonium in Pure Plutonium Nitrate Solutions - Gravimetric Method First Edition
Hydraulic Fluid Power - Positive Displacement Pumps and Motors - Determination of Derived Capacity First Edition
Optics and Optical Instruments - Ophthalmology - Graduated Dial Scale First Edition
Resistance Spot Welding - Electrode Holders - Part 1: Taper Fixing 1 : 10 First Edition
Resistance Spot Welding - Electrode Holders - Part 2: Morse Taper Fixing First Edition
ISO
ISO
ISO
8430-3
8431
8432
Resistance Spot Welding - Electrode Holders - Part 3: Parallel Shank Fixing for End Thrust First Edition; Corrigendum 1: 1990
Shipbuilding - Fixed Jib Cranes - Ship-Mounted Type for General Cargo Handling First Edition
Essential Oils - Analysis by High Performance Liquid Chromatography - General Method First Edition
ISO
ISO
ISO
ISO
ISO
ISO
8434-1
8434-2
8434-3
8437
8439
8440
ISO
ISO
8441-1
8441-2
ISO
8442-1
ISO
8442-2
ISO
8442-3
ISO
8442-4
ISO
8442-5
ISO
8442-6
ISO
8442-7
ISO
ISO
8442-8
8443
Metallic tube connections for fluid power and general use ù Part 1: 24 cone connectors Second Edition [Replaced: ISO 8434-4]
Metallic tube connections for fluid power and general use ù Part 2: 37 flared connectors Second Edition
Metallic tube connections for fluid power and general use - Part 3: O-ring face seal connectors Second Edition
Snowthrowers - Safety Requirements and Test Procedures First Edition; Amendment 1 04/01/1997
Forms Design - Basic Layout First Edition
Location of Codes in Trade Documents First Edition; Technical Corrigendum 1: 12/1/2000
Information Technology - High Density Digital Recording (HDDR) - Part 1: Unrecorded Magnetic Tape for (HDDR) Applications First
Edition
Information Technology - High Density Digital Recording (HDDR) - Part 2: Guide for Interchange Practice First Edition
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 1: Requirements for Cutlery for the Preparation
of Food First Edition
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 2: Requirements for Stainless Steel and SilverPlated Cutlery First Edition; Corrected 01/015/1998
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 3: Requirements for Silver-Plated Table and
Decorative Holloware First Edition
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 4: Requirements for Gold-Plated Cutlery First
Edition; Corrected 01/15/1998
Materials and articles in contact with foodstuffs Cutlery and table holloware Part 5: Specification for sharpness and edge retention
test of cutlery First Edition
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 6: Lightly Silver-Plated Table Holloware
Protected by Lacquer First Edition
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 7: Requirements for Table Cutlery Made of
Silver, Other Precious Metals and Their Alloys First Edition
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 8: Requirements for Silver Table and
Decorative Holloware First Edition
Rolling Bearings - Radial Ball Bearings with Flanged Outer Ring - Flange Dimensions Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8454
8455
8456
8458-1
8458-2
8458-3
8459-1
ISO
8459-2
ISO
ISO
8459-3
8459-4
ISO
ISO
8459-5
8460
ISO
8462-1
ISO
8462-2
ISO
8466-1
ISO
ISO
ISO
ISO
ISO
8466-2
8467
8468
8469
8470
ISO
8473-1
ISO
8473-2
ISO
8473-3
ISO
8473-4
Cigarettes ù Determination of carbon monoxide in the vapour phase of cigarette smoke ù NDIR method Third Edition
Green Coffee in Bags - Guide to Storage and Transport First Edition
Storage Equipment for Loose Bulk Materials - Safety Code First Edition
Steel Wire for Mechanical Springs - Part 1: General Requirements Second Edition
Steel Wire for Mechanical Springs - Part 2: Patented Cold-Drawn Non-Alloy Steel Wire Second Edition
Steel wire for mechanical springs Part 3: Oil-hardened and tempered wire Second Edition; Corrected Version 02/01/2003
Documentation - Bibliographic Data Element Directory - Part 1: Interloan Applications First Edition AS/NZS 4450.1: 1997
Information and Documentation - Bibliographic Data Element Directory - Part 2: Acquisitions Applications First Edition AS/NZS
4450.2: 1997
Information and Documentation - Bibliographic Data Element Directory - Part 3: Information Retrieval Applications First Edition
AS/NZS 4450.3: 1997
Information and Documentation - Bibliographic Data Element Directory - Part 4: Circulation Applications First Edition
Information and Documentation - Bibliographic Data Element Directory - Part 5: Data Elements for the Exchange of Cataloguing and
Metadata First Edition
Instant Coffee - Determination of Free-Flow and Compacted Bulk Densities First Edition
Information Processing - Data Interchange on 6,30 mm (0.25 in) Magnetic Tape Cartridge Using GCR Recording at 394 ftpmm (10
000 ftpi), 39 cpmm (1 000 cpi) - Part 1: Mechanical, Physical and Magnetic Properties First Edition
Information Processing - Data Interchange on 6,30 mm (0.25 in) Magnetic Tape Cartridge Using GCR Recording at 394 ftpmm (10
000 ftpi), 39 cpmm (1 000 cpi) - Part 2: Streaming Mode First Edition
Water Quality - Calibration and Evaluation of Analytical Methods and Estimation of Performance Characteristics Part 1: Statistical
Evaluation of the Linear Calibration Function First Edition
Water Quality - Calibration and Evaluation of Analytical Methods and Estimation of Performance Characteristics - Part 2: Calibration
Strategy for Non-Linear Second-Order Calibration Functions Second Edition
Water Quality - Determination of Permanganate Index Second Edition; (CEN EN ISO 8467: 1995)
Ships and marine technology - Ship's bridge layout and associated equipment - Requirements and guidelines Third Edition
Small Craft - Non-Fire-Resistant Fuel Hoses Second Edition
Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings Third Edition
Information Technology - Protocol for Providing the Connectionless-Mode Network Service: Protocol Specification Second Edition
Information Technology - Protocol for Providing the Connectionless-Mode Network Service - Part 2: Provision of the Underlying
Service by an ISO/IEC 8802 Subnetwork First Edition
Information Technology - Protocol for Providing the Connectionless-Mode Network Service: Provision of the Underlying Service by an
X.25 Subnetwork First Edition
Information Technology - Protocol for Providing the Connectionless-Mode Network Service: Provision of the Underlying Service by a
Subnetwork That Provides the OSI Data Link Service First Edition
Information Technology - Protocol for Providing the Connectionless-Mode Network Service: Provision of the Underlying Service by
ISDN Circuit-Switched B-Channels First Edition
Packaging - Complete, Filled Transport Packages - Water Immersion Test First Edition; (CEN EN 28474: 1992)
Photography - Camera Lenses - Measurement of ISO Spectral Transmittance First Edition
Aerospace -Q" Clamps (Centre-Mounted Clamps) for Fluid Systems - Dimensions First Edition"
Information Technology - Telecommunications and Information Exchange between Systems - DTE/DCE Interface Back-Up Control
Operation Using ITU-T Recommendation V.24 Interchange Circuits Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - DTE to DTE Direct Connections
Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Twisted Pair Multipoint
Interconnections Second Edition
ISO
ISO
ISO
ISO
8473-5
8474
8478
8479
ISO
8480
ISO
8481
ISO
8482
ISO
ISO
ISO
ISO
8483
8484
8485
8486-1
Glass-reinforced thermosetting plastics (GRP) pipes and fittings Test methods to prove the design of bolted flange joints First Edition
Magnetic Stripes on Savingsbooks First Edition
Programming Languages - APL First Edition; CEN EN 28485: 1993
Bonded Abrasives - Determination and Designation of Grain Size Distribution - Part 1: Macrogrits F4 F220 First Edition;
ISO
ISO
ISO
8486-2
8488
8489-1
ISO
8489-2
ISO
8489-3
ISO
8489-4
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8489-5
8491
8492
8493
8494
8495
8496
ISO
8497
Bonded Abrasives - Determination and Designation of Grain Size Distribution - Part 2: Microgrits F230 to F1200 First Edition;
Cycles - Screw Threads Used to Assemble Head Fittings on Bicycle Forks First Edition
Textile Machinery and Accessories - Cones for Cross Winding - Part 1: Recommended Main Dimensions Second Edition
Textile Machinery and Accessories - Cones for Cross Winding - Part 2: Dimensions, Tolerances and Designation of Cones with Half
Angle 3 Degrees 30 First Edition; Replaces ISO 112:1983
Textile Machinery and Accessories - Cones for Cross Winding - Part 3: Dimensions, Tolerances and Designation of Cones with Half
Angle 4 Degrees 20 First Edition; Replaces ISO 111: 1978
Textile Machinery and Accessories - Cones for Cross Winding - Part 4: Dimensions, Tolerances and Designation of Cones with Half
Angle 4 Degrees 20 for Winding for Dyeing Purposes First Edition; [Replaced: ISO TS 10303-324]
Textile Machinery and Accessories - Cones for Cross-Winding - Part 5: Dimensions, Tolerances and Designation of Cones with Half
Angle 5 Degrees 57 First Edition;
Metallic Materials - Tube (in Full Section) - Bend Test Second Edition
Metallic Materials - Tube - Flattening Test Second Edition
Metallic Materials - Tube - Drift-Expanding Test Second Edition
Metallic Materials - Tube - Flanging Test Second Edition
Metallic Materials - Tube - Ring-Expanding Test Second Edition
Metallic Materials - Tube - Ring Tensile Test Second Edition
Thermal Insulation - Determination of Steady-State Thermal Transmission Properties of Thermal Insulation for Circular Pipes First
Edition CEN EN ISO 8497: 1996
ISO
ISO
8498
8499
Woven Fabrics - Description of Defects - Vocabulary First Edition
Knitted fabrics Description of defects Vocabulary toffes Ó mailles Description des dÚfauts Vocabulaire Second Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Visual Assessment of Surface Cleanliness - Part
1: Rust Grades and Preparation Grades of Uncoated Steel Substrates and of Steel Substrates After Overall Removal of Previous
Coatings PrÚparation des subjectiles d'acier avant application de peintures et de produits assimilÚs - valuation visuelle de la
propretÚ d'un subjectile - Partie 1: DegrÚs de rouille et degrÚs de prÚparation des subjectiles d'acier non recouverts et des
subjectiles d'acier apr×s dÚcapage sur toute la surface des revÛtements prÚcÚdents Second Edition
ISO
8501-1
ISO
8501-2
ISO
8501-3
Preparation of Steel Substrates Before Application of Paints and Related Products - Visual Assessment of Surface Cleanliness - Part
2: Preparation Grades of Previously Coated Steel Substrates After Localized Removal of Previous Coatings First Edition
Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 3:
Preparation grades of welds, edges and other areas with surface imperfections Second Edition
ISO
8501-4
Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 4:
Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting First Edition
ISO
8502-2
ISO
8502-3
ISO
8502-4
ISO
8502-5
ISO
8502-6
ISO
8502-8
ISO
8502-9
ISO
8502-11
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness
Part 2: Laboratory determination of chloride on cleaned surfaces Second Edition; Corrected and Reprinted: 01/15/2006
Preparation of Steel Substrates Before Application of Paint and Related Products - Tests for the Assessment of Surface Cleanliness Part 3: Assessment of Dust on Steel Surfaces Prepared for Painting (Pressure-Sensitive Tape Method) First Edition; (Corrected and
Reprinted - 1993)
Preparation of Steel Substrates Before Application of Paint and Related Products - Tests for the Assessment of Surface Cleanliness Part 4: Guidance on the Estimation of the Probability of Condensation Prior to Paint Application First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness
- Part 5: Measurement of Chloride on Steel Surfaces Prepared for Painting (Ion Detection Tube Method) First Edition
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness
Part 6: Extraction of soluble contaminants for analysis The Bresle method Second Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness
- Part 8: Field Method for the Refractometric Determination of Moisture First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness
- Part 9: Field Method for the Conductometric Determination of Water-Soluble Salts First Edition; Corrected and Reprinted
12/15/1999
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness
Part 11: Field method for the turbidimetric determination of water-soluble sulfate First Edition
ISO
8502-12
ISO
8503-1
ISO
8503-2
ISO
8503-3
ISO
8503-4
ISO
8503-5
ISO
8504-1
ISO
8504-2
ISO
ISO
8504-3
8507
ISO
ISO
ISO
ISO
ISO
8510-1
8510-2
8511
8512-1
8512-2
ISO
8513
ISO
ISO
ISO
8514-1
8514-2
8516
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness
Part 12: Field method for the titrimetric determination of water-soluble ferrous ions First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of BlastCleaned Steel Substrates - Part 1: Specifications and Definitions for ISO Surface Profile Comparators for the Assessment of Abrasive
Blast-Cleaned Surfaces First Edition; (CEN EN ISO 8503-1: 1995)
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of BlastCleaned Steel Substrates - Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel Comparator Procedure
First Edition; CEN EN ISO 8503-2: 1995
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of BlastCleaned Steel Substrates - Part 3: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of
Surface Profile - Focusing Microscope Procedure First Edition; (CEN EN ISO 8503-3: 1995)
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of BlastCleaned Steel Substrates - Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of
Surface Profile - Stylus Instrument Procedure First Edition (CEN EN ISO 8503-4: 1995)
Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned
steel substrates Part 5: Replica tape method for the determination of the surface profile First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 1: General
Principles Second Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 2: Abrasive
Blast-Cleaning second edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 3: Hand- and
Power-Tool Cleaning First Edition
Agglomerated Cork Discs - Test Methods Second Edition
Adhesives - Peel Test for a Flexible-Bonded-to- Rigid Test Specimen Assembly - Part 1: 90 Degree Peel First Edition; (CEN EN
28510-1: 1993)
Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 2: 180 peel Second Edition
Rubber Compounding Ingredients - Carbon Black - Determination of Pellet Size Distribution Second Edition
Surface Plates - Part 1: Cast Iron First Edition
Surface Plates - Part 2: Granite First Edition
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of Longitudinal Tensile Properties
First Edition
Micrographics - Alphanumeric Computer Output Microforms - Quality Control - Part 1: Characteristics of the Test Slide and Test Data
Second Edition
Micrographics - Alphanumeric Computer Output Microforms - Quality Control - Part 2: Method Second Edition
Textile Glass - Textured Yarns - Basis for a Specification First Edition
ISO
8518
ISO
ISO
8521
8524
ISO
8526-1
ISO
8526-2
ISO
ISO
8528-1
8528-2
ISO
8528-3
ISO
ISO
ISO
8528-4
8528-5
8528-6
ISO
8528-7
ISO
8528-8
ISO
8528-9
ISO
8528-10
ISO
ISO
8528-12
8529-1
ISO
8529-2
ISO
ISO
ISO
ISO
8529-3
8530
8531
8532
Workplace Air - Determination of Particulate Lead and Lead Compounds - Flame or Electrothermal Atomic Absorption Spectrometric
Method Second Edition
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Apparent Initial
Circumferential Tensile Strength First Edition
Equipment for Distributing Granulated Pesticides or Herbicides - Test Method First Edition
Modular Units for Machine Tools - Workholding Pallets - Part 1: Workholding Pallets up to 800 mm Nominal Size First Edition
Modular Units for Machine Tools - Workholding Pallets - Part 2: Workholding Pallets of Nominal Size Greater Than 800 mm First
Edition; Corrigendum 1: 1992
Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance
Second Edition
Reciprocating internal combustion engine driven alternating current generating sets Part 2: Engines Second Edition
Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for
generating sets Second Edition
Reciprocating internal combustion engine driven alternating current generating sets Part 4: Controlgear and switchgear Second
Edition
Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets Second Edition
Reciprocating internal combustion engine driven alternating current generating sets Part 6: Test methods Second Edition
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 7: Technical Declarations for
Specification and Design First Edition
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 8: Requirements and Tests for LowPower Generating Sets First Edition
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 9: Measurement and Evaluation of
Mechanical Vibrations First Edition
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 10: Measurement of Airbourne Noise by
the Enveloping Surface Method First Edition
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 12: Emergency Power Supply to Safety
Services First Edition
Reference Neutron Radiations - Part 1: Characteristics and Methods of Production First Edition
Reference Neutron Radiations - Part 2: Calibration Fundamentals of Radiation Protection Devices Related to the Basic Quantities
Characterizing the Radiation Field First Edition
Reference Neutron Radiations - Part 3: Calibration of Area and Personal Dosimeters and Determination of their Response as a
Function of Neutron Energy and Angle of Incidence First Edition
Manganese and Chromium Ores - Experimental Methods for Checking the Precision of Sample Division First Edition
Manganese and Chromium Ores - Experimental Methods for Checking the Precision of Moisture Determination First Edition
Securities - Format for Transmission of Certificate Numbers Second Edition
ISO
ISO
8533
8534
ISO
8535-1
ISO
ISO
8535-2
8536-1
Glass-reinforced thermosetting plastics (GRP) pipes and fittings Test methods to prove the design of cemented or wrapped joints
First Edition
Animal and Vegetable Fats and Oils - Determination of Water Content - Karl Fischer Method First Edition
Diesel engines Steel tubes for highpressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes
Fourth Edition
Compression-Ignition Engines - Steel Tubes for High-Pressure Fuel Injection Pipes - Part 2: Requirements for Composite Tubes
Second Edition
Infusion Equipment for Medical Use - Part 1: Infusion Glass Bottles Third Edition
ISO
ISO
ISO
ISO
ISO
8536-2
8536-3
8536-4
8536-5
8536-6
Infusion Equipment for Medical Use - Part 2: Closures for Infusion Bottles Second Edition; Technical Corrigendum 1; 2/01/2003
Infusion Equipment for Medical Use - Part 3: Aluminium Caps for Infusion Bottles Second Edition
Infusion equipment for medical use ù Part 4: Infusion sets for single use, gravity feed Fourth Edition
Infusion equipment for medical use Part 5: Burette infusion sets for single use, gravity feed Second Edition
Infusion Equipment for Medical Use - Part 6: Freeze Drying Closures for Infusion Bottles First Edition
ISO
ISO
ISO
8536-7
8536-8
8536-9
Infusion Equipment for Medical Use - Part 7: Caps Made of Aluminium-Plastics Combinations for Infusion Bottles Second Edition
Infusion Equipment for Medical Use - Part 8: Infusion equipment for use with pressure infusion apparatus First Edition
Infusion equipment for medical use Part 9: Fluid lines for use with pressure infusion equipment First Edition
ISO
ISO
ISO
ISO
8536-10
8536-11
8536-12
8537
ISO
ISO
ISO
8538
8539
8540
Infusion equipment for medical use Part 10: Accessories for fluid lines for use with pressure infusion equipment First Edition
Infusion equipment for medical use Part 11: Infusion filters for use with pressure infusion equipment First Edition
Infusion equipment for medical use ù Part 12: Check valves First Edition
Sterile Single-Use Syringes, with or without Needle, for Insulin First Edition; Amendment 1: 11/01/2000
Aerospace - Nuts, Hexagonal, Self-Locking with Counterbore and Captive Washer, with MJ Threads, Classifications: 1 100 MPa (at
Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient
Temperature)/425 Degrees Celsius - Dimensions Second Edition
Forged Steel Lifting Components for Use with Grade T(8) Chain First Edition
Open Front Mechanical Power Presses - Vocabulary First Edition
ISO
8541
ISO
ISO
ISO
ISO
ISO
8542
8543
8548-1
8548-2
8548-3
Manganese and Chromium Ores - Experimental Methods for Checking the Bias of Sampling and Sample Preparation First Edition
Manganese and Chromium Ores - Experimental Methods for Evaluation of Quality Variation and Methods for Checking the Precision
of Sampling First Edition
Textile Floor Coverings - Methods for Determination of Mass Second Edition
Prosthetics and Orthotics - Limb Deficiencies - Part 1: Method of Describing Limb Deficiencies Present at Birth First Edition
Prosthetics and Orthotics - Limb Deficiencies - Part 2: Method of Describing Lower Limb Amputation Stumps First Edition
Prosthetics and Orthotics - Limb Deficiencies - Part 3: Method of Describing Upper Limb Amputation Stumps First Edition
ISO
8548-4
ISO
8548-5
ISO
8549-1
ISO
ISO
8549-2
8549-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8551
8552
8553
8556
8557
8558
8559
8560
8562
8563
8565
8566-1
8566-2
8566-3
8566-4
8566-5
ISO
8567 CORR 1
ISO
ISO
8567
8568
ISO
ISO
8569
8570
ISO
8571-1
Prosthetics and Orthotics - Limb Deficiencies - Part 4: Description of Casual Conditions Leading to Amputation First Edition
Prosthetics and orthotics Limb deficiencies Part 5: Description of the clinical condition of the person who has had an amputation
First Edition
Prosthetics and Orthotics - Vocabulary - Part 1: General Terms for External Limb Prostheses and External Orthoses First Edition
Prosthetics and Orthotics - Vocabulary - Part 2: Terms Relating to External Limb Prostheses and Wearers of These Prostheses First
Edition
Prosthetics and Orthotics - Vocabulary - Part 3: Terms Relating to External Orthoses First Edition
Prosthetics and orthotics Functional deficiencies Description of the person to be treated with an orthosis, clinical objectives of
treatment, and functional requirements of the orthosis First Edition
Milk Estimation of psychrotrophic microorganisms Colony-count technique at 21 C (Rapid method) First Edition; IDF 132
Milk Enumeration of microorganisms Plate-loop technique at 30 C First Edition; IDF 131
Aluminium Ores - Determination of Phosphorus Content - Molybdenum Blue Spectrophotometric Method First Edition
Aluminium Ores - Determination of Hygroscopic Moisture in Analytical Samples - Gravimetric Method First Edition
Aluminium Ores - Preparation of Pre-Dried Test Samples First Edition
Garment Construction and Anthropometric Surveys - Body Dimensions First Edition
Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and Grids First Edition
Cycles - Stem Wedge Angle First Edition
Propylene and Butadiene for Industrial Use - Sampling in the Liquid Phase First Edition
Metals and Alloys - Atmospheric Corrosion Testing - General Requirements for Field Tests First Edition
Cranes - Cabins - Part 1: General First Edition
Cranes - Cabins - Part 2: Mobile Cranes First Edition
Cranes - Cabins - Part 3: Tower Cranes First Edition
Cranes - Cabins - Part 4: Jib Cranes First Edition
Cranes - Cabins - Part 5: Overhead Travelling and Portal Bridge Cranes First Edition
Cinematography ù Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints ù Position and
dimensions TECHNICAL CORRIGENDUM 1 Second Edition
Cinematography ù Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints ù Position and
dimensions Second Edition
Mechanical shock ù Testing machines ù Characteristics and performance Second Edition
Mechanical Vibration and Shock - Measurement and Evaluation of Shock and Vibration Effects on Sensitive Equipment in Buildings
Second Edition
Plastics - Film and Sheeting - Determination of Cold-Crack Temperature First Edition
Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 1: General
Introduction First Edition; Amendment 1: 1992; Amendment 2: 1993; Corrigendum 1: 1991
ISO
8571-2
ISO
8571-3
ISO
8571-4
ISO
8571-5
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8572
8573-1
8573-2
8573-3
8573-4
8573-5
8573-6
8573-7
8573-8
8573-9
8574
8575
8576
8577
ISO
ISO
8578
8579-1
ISO
8579-2
ISO
ISO
8580
8581
ISO
8583-1
ISO
8583-2
Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 2: Virtual Filestore
Definition First Edition; Amendment 1: 1992; Amendment 2: 1993; Corrigendum 1: 1991
Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 3: File Service
Definition First Edition; Amendment 1- 1992; Amendment 2- 1993; Corrigendum 1- 1991; Corrigendum 2- 1992
Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 4: File Protocol
Specification First Edition; Amendment 4: 11-15-1992; Corrigendum 1: 10-15-1992; Amendment 1: 12-15-1992; Amendment 2: 08-151993; Corrigendum 1 to Amendment 4: 04-01-1995
Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 5: Protocol
Implementation Conformance Statement Proforma First Edition; AS/NZS 3646.5: 1994
Pipes and Fittings Made of Glass-Reinforced Thermosetting Plastics (GRP) - Definitions of Terms Relating to Pressure, Including
Relationships Between Them, and Terms for Installation and Jointing First Edition
Compressed Air - Part 1: Contaminants and Purity Classes Second Edition; Corrigendum 1 4/1/2002
Compressed air ù Part 2: Test methods for oil aerosol content Second Edition
Compressed Air - Part 3: Test Methods for Measurement of Humidity First Edition
Compressed Air - Part 4: Test Methods for Solid Particle Content First Edition; Technical Corrigendum:4/01/2002
Compressed Air - Part 5: Test Methods for Oil Vapour and Organic Solvent Content First Edition
Compressed air Part 6: Test methods for gaseous contaminant content First Edition
Compressed air Part 7: Test method for viable microbiological contaminant content First Edition
Compressed air Part 8: Test methods for solid particle content by mass concentration First Edition
Compressed air Part 9: Test methods for liquid water content First Edition
Aerospace Hydraulic system tubing Qualification tests for bent tubes Second Edition
Aerospace - Fluid Systems - Hydraulic System Tubing First Edition
Optics and Optical Instruments - Microscopes - Reference System of Polarized Light Microscopy First Edition
Optics and Optical Instruments - Microscopes - Spectral Filters First Edition
Optics and Optical Instruments - Microscopes - Marking of Objectives and Eyepieces First Edition; Technical Corrigendum 1:
11/01/2002
Acceptance Code for Gears - Part 1: Test Code for Airborne Sound Second Edition
Acceptance Code for Gears - Part 2: Determination of Mechanical Vibrations of Gear Units During Acceptance Testing First Edition
Rubber and Plastics Hoses - Determination of Ultra-Violet Resistance Under Static Conditions First Edition; (CEN EN ISO 8580:
1995)
Photography - Electronic Flash Equipment - Connectors to Synchro-Cord First Edition
Financial transaction card originated messages Interchange message specifications Part 1: Messages, data elements and code
values First Edition
Financial Transaction Card Originated Messages - Interchange Message Specifications - Part 2: Application and Registration
Procedures for Institution Identification Codes (IIC) First Edition
Financial transaction card originated messages Interchange message specifications Part 3: Maintenance procedures for messages,
data elements and code values Second Edition
Sensory Analysis - General Guidance for the Selection, Training and Monitoring of Assessors - Part 1: Selected Assessors First
Edition
Sensory Analysis - General Guidance for the Selection, Training and Monitoring of Assessors - Part 2: Experts First Edition
Sensory analysis Methodology Ranking Second Edition
Sensory Analysis - Methodology -A" -"Not A" Test First Edition"
Sensory Analysis - General Guidance for the Design of Test Rooms First Edition
Cinematography - Audio Records on 70 mm Motion-Picture Release Prints with Magnetic Stripes - Recorded Characteristic Second
Edition
Aerospace - Wrought Aluminium and Aluminium Alloys - Inspection, Testing and Supply Requirements - Part 1: General
Requirements First Edition
ISO
8583-3
ISO
ISO
ISO
ISO
ISO
8586-1
8586-2
8587
8588
8589
ISO
8590
ISO
8591-1
ISO
8596
ISO
ISO
ISO
8597
8598
8600-1
ISO
8600-2
ISO
8600-3
ISO
8600-4
ISO
ISO
ISO
8600-5
8600-6
8601
Ophthalmic Optics - Visual Acuity Testing - Standard Optotype and Its Presentation First Edition; (CEN EN ISO 8596: 1996)
Optics and Optical Instruments - Visual Acuity Testing - Method of Correlating Optotypes (CEN EN ISO 8597: 1996) First Edition;
Corrigendum 1: 1995
Optics and Optical Instruments - Focimeters First Edition; Technical Corrigendum 1-1998
Optics and photonics Medical endoscopes and endotherapy devices Part 1: General requirements Second edition
Optics and Optical Instruments - Medical Endoscopes and Endoscopic Accessories - Part 2: Particular Requirements for Rigid
Bronchoscopes First Edition
Optics and optical instruments Medical endoscopes and endoscopic accessories Part 3: Determination of field of view and direction
of view of endoscopes with optics First Edition; AMENDMENT 1: 12/01/2003
Optics and Optical Instruments - Medical Endoscopes and Certain Accessories - Part 4: Determination of Maximum Width of
Insertion Portion First Edition
Optics and photonics Medical endoscopes and endotherapy devices Part 5: Determination of optical resolution of rigid endoscopes
with optics First edition
Optics and photonics Medical endoscopes and endotherapy devices Part 6: Vocabulary First edition
Data Elements and Interchange Formats - Information Interchange - Representation of Dates and Times Third Edition
ISO
ISO
ISO
ISO
ISO
8602
8603
8604
8605
8606
Information Technology - Protocol for Providing the OSI Connectionless-Mode Transport Service Second Edition; Amendment 1-1996
Solid Fertilizers - Determination of Urea Nitrogen Content - Gravimetric Method Using Xanthydrol First Edition
Plastics - Prepregs - Definitions of Terms and Symbols for Designations First Edition
Textile-Glass-Reinforced Plastics - Sheet Moulding Compound (SMC) - Basis for a Specification Second Edition
Plastics - Prepregs - Bulk Moulding Compound (BMC) and Dough Moulding (DMC) - Basis for a Specification First Edition
ISO
8607
Artificial Insemination of Animals - Frozen Semen of Breeding Bulls - Enumeration of Living Aerobic Microorganisms First Edition
ISO
8608
ISO
ISO
8611-1
8612
ISO
8613-1
ISO
8613-2
ISO
8613-3
ISO
8613-4
ISO
8613-5
ISO
8613-6
ISO
8613-7
ISO
8613-8
ISO
8613-9
ISO
8613-10
ISO
8613-11
ISO
8613-12
ISO
ISO
ISO
8613-14
8614
8619
ISO
ISO
ISO
8622
8623
8624
Mechanical Vibration - Road Surface Profiles - Reporting of Measured Data First Edition
Pallets for materials handling Flat pallets Part 1: Test methods First Edition; Together with ISO 8611-2 and ISO 8611-3, cancels and
replaces ISO 8611:1991
Ophthalmic Instruments - Tonometers First Edition
Information Technology - Open Document Architecture (ODA) and Interchange Format: Introduction and General Principles Second
Edition; Technical Corrigendum 1: 12-15-1998
Information Technology - Open Document Architecture (ODA) and Interchange Format: Document Structures Second Edition;
Technical Corrigendum 1: 12-15-1998; Technical Corrigendum 2: 12-15-198
Information Technology - Open Document Architecture (ODA) and Interchange Format: Abstract Interface for the Manipulation of
ODA Documents First Edition
Information Technology - Open Document Architecture (ODA) and Interchange Format: Document Profile Second Edition; Technical
Corrigendum 1: 12-15-1998; Technical Corrigendum 2: 12-15-1998
Information Technology - Open Document Architecture (ODA) and Interchange Format: Open Document Interchange Format Second
Edition; Technical Corrigendum 1: 12-15-1998; Technical Corrigendum 2: 12-15-1998
Information Technology - Open Document Architecture (ODA) and Interchange Format: Character Content Architectures Second
Edition; Technical Corrigendum 1: 12-15-1998
Information Technology - Open Document Architecture (ODA) and Interchange Format: Raster Graphics Content Architectures
Second Edition; Amendment 1: 12-15-1998; Technical Corrigendum 1: 12-15-1998
Information Technology - Open Document Architecture (ODA) and Interchange Format: Geometric Graphics Content Architectures
Second Edition
Information Technology - Open Document Architecture (ODA) and Interchange Format: Audio Content Architectures First Edition
Information Technology - Open Document Architecture (ODA) and Interchange Format - Part 10: Formal Specifications Second
Edition
Information Technology - Open Document Architecture (ODA) and Interchange Format: Tabular Structures and Tabular Layout First
Edition
Information Technology - Open Document Architecture (ODA) and Interchange Format: Identification of Document Fragments First
Edition
Information Technology - Open Document Architecture (ODA) and Interchange Format: Temporal Relationships and Non-Linear
Structures First Edition
Ski Bindings - Vocabulary Fixations De Ski - Vocabulaire First Edition
Plastics - Phenolic Resin Powder - Determination of Flow Distance on a Heated Glass Plate Third Edition
Cinematography - Magnetic Sound Records on 70 mm Motion-Picture Release Prints with Magnetic Stripes - A-Chain Reproduction
Characteristics Second Edition
Tall-Oil Fatty Acids for Paints and Varnishes - Specifications and Test Methods First Edition
Ophthalmic Optics - Spectacle Frames Measuring System and Terminology Second Edition
ISO
ISO
ISO
ISO
8625-1
8625-2
8625-3
8626
ISO
8630-1
ISO
8630-2
ISO
ISO
8630-3
8631
ISO
8632-1
ISO
8632-3
ISO
ISO
8632-4
8634
ISO
ISO
8636-1
8636-2
ISO
8637
ISO
8638
ISO
8639
ISO
8640-1
ISO
8640-2
Aerospace - Fluid Systems - Vocabulary - Part 1: General Terms and Definitions Relating to Pressure First Edition
Aerospace - Fluid Systems - Vocabulary - Part 2: General Terms and Definitions Relating to Flow First Edition
Aerospace - Fluid Systems - Vocabulary - Part 3: General Terms and Definitions Relating to Temperature First Edition
Servo-Hydraulic Test Equipment for Generating Vibration - Method of Describing Characteristics First Edition
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 13 262 ftprad, on 80 Tracks on Each Side - Part 1: Dimensional, Physical and Magnetic Characteristics First Edition;
CEN EN 28630-1: 1992
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 13 262 ftprad, on 80 Tracks on Each Side - Part 2: Track Format A for 99 Tracks First Edition; Corrigendum 1-1992;
CEN EN 28630-2: 1992
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 13 262 ftprad, on 80 Tracks on Each Side - Part 3: Track Format B for 80 Tracks First Edition; Corrigendum 1-1992;
CEN EN 28630-3: 1992
Information Technology - Program Constructs and Conventions for Their Representation Second Edition
Information Technology - Computer Graphics - Metafile for the Storage and Transfer of Picture Description Information - Part 1:
Functional Specification Second Edition; Technical Corrigendum 1: 04/01/2006
Information Technology - Computer Graphics - Metafile for the Storage and Transfer of Picture Description Information - Part 3:
Binary Encoding Second Edition
Information Technology - Computer Graphics - Metafile for the Storage and Transfer of Picture Description Information - Part 4: Clear
Text Encoding Second Edition
Solid Fertilizers - Sampling Plan for the Evaluation of a Large Delivery First Edition
Machine Tools - Test Conditions for Bridge-Type Milling Machines - Testing of the Accuracy - Part 1: Fixed Bridge (Portal-Type)
Machines Second Edition
Acceptance Conditions for Plano-Milling Machines - Testing of the Accuracy - Part 2: Gantry-Type Machines First Edition
Cardiovascular implants and artificial organs Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators Second
Edition
Cardiovascular implants and artificial organs Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters
Second Edition
Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Test Methods for Leaktightness of Flexible Joints First Edition
Textile machinery and accessories Flat warp knitting machines Part 1: Vocabulary of basic sctructure and knitting elements MatÚriel
pour l'industrie textile Machines Ó tricoter rectilignes Ó mailles jetÚes Partie 1: Vocabulaire de la structure de base et des ÚlÚments
de tricotage Second Edition; Bilingual
Textile machinery and accessories Flat warp knitting machines Part 2: Vocabulary of warp let-off, fabric take-up and batching
MatÚriel pour l'industrie textile Machines Ó tricoter rectilignes Ó mailles jetÚes Partie 2: Vocabulaire du dÚroulement de la cha¯ ne,
de l'enroulement et du chargement du tissu Second Edition; Bilingual
Textile Machinery and Accessories - Flat Warp Knitting Machines - Part 3: Vocabulary of Patterning Devices Materiel Pour L'Industrie
Textile - Machines A Tricoter Rectilignes A Mailles Jetees - Partie 3: Vocabulaire Des Dispositifs a Dessin First Edition
Aerospace - Self-Locking Nuts with Maximum Operating Temperature Greater Than 425 Degrees Celsius - Procurement
Specification First Edition
Aerospace - Self-Locking Nuts with Maximum Operating Temperature Greater Than 425 Degrees Celsius - Test Methods First
Edition
Earth-Moving Machinery - Hydraulic Excavator and Backhoe Loader Boom-Lowering Control Device - Requirements and Tests
Second Edition; BS 6912: Part 1: 1997
Motorcycles Light-alloy wheels Test method Second Edition
Mopeds - Light-Alloy Wheels - Test Method First Edition
Information Processing Systems - Open Systems Interconnection - Internal Organization of the Network Layer First Edition;
Corrigendum 1-1991
Information Technology - Open Systems Interconnection - Service Definition for the Association Control Service Element Second
Edition; Amendment 1-1997; Amendment 2-1998
Information Technology - Open Systems Interconnection - Protocol Specification for the Association Control Service Element:
Protocol Implementation Conformance Statement (PICS) Proforma Second Edition
Information Processing Systems - Computer Graphics - Graphical Kernel System (GKS) Language Bindings - Part 1: FORTRAN First
Edition
Information Processing Systems - Computer Graphics - Graphical Kernel System (GKS) Language Bindings - Part 2: Pascal First
Edition
Information Processing Systems - Computer Graphics - Graphical Kernel System (GKS) Language Bindings - Part 3: ADA First
Edition
ISO
8640-3
ISO
8641
ISO
8642
ISO
ISO
ISO
8643
8644
8645
ISO
8648
ISO
8649
ISO
8650-2
ISO
8651-1
ISO
8651-2
ISO
8651-3
ISO
ISO
ISO
ISO
ISO
8651-4
8652 AMD 1
8652
8653
8654
Information Technology - Computer Graphics - Graphical Kernel System (GKS) Language Bindings - Part 4: C Second Edition
Information technology ù Programming languages ù Ada AMENDMENT 1 Second Edition
Information Technology - Programming Languages - Ada Technical Corrigendum 1:06/01/2001
Jewellery - Ring-Sizes - Definition, Measurement and Designation First Edition; (CEN EN 28653: 1992)
Colours of Gold Alloys - Definition, Range of Colours and Designation First Edition; (CEN EN 28654: 1992)
ISO
ISO
ISO
ISO
ISO
8655-1
8655-2
8655-3
8655-4
8655-5
Piston-Operated Volumetric Apparatus - Part 1: Terminology, General Requirements and User Recommendations First Edition
Piston-Operated Volumetric Apparatus - Part 2: Piston Pipettes First Edition
Piston-Operated Volumetric Apparatus - Part 3: Piston Burettes First Edition
Piston-Operated Volumetric Apparatus - Part 4: Dilutors First Edition
Piston-Operated Volumetric Apparatus - Part 5: Dispensers First Edition
ISO
8655-6
Piston-Operated Volumetric Apparatus - Part 6: Gravimetric Methods for the Determination of Measurement Error First Edition
ISO
ISO
8655-7
8656-1
ISO
ISO
ISO
ISO
8658
8659
8660
8661
ISO
8662-1
ISO
8662-2
ISO
8662-3
ISO
8662-4
ISO
8662-5
ISO
8662-6
ISO
8662-7
ISO
ISO
ISO
8662-8
8662-9
8662-10
ISO
8662-11
ISO
8662-12
ISO
8662-13
ISO
8662-14
Piston-operated volumetric apparatus Part 7: Non-gravimetric methods for the assessment of equipment performance First Edition
Refractory Products - Sampling of Raw Materials and Unshaped Products - Part 1: Sampling Scheme First Edition
Carbonaceous Materials for Use in the Production of Aluminium - Green and Calcined Coke - Determination of Trace Elements by
Flame Atomic Absorption Spectroscopy First Edition
Thermoplastics Valves - Fatigue Strength - Test Method First Edition
Plastics - Determination of Permanganate Absorption Number of Caprolactam - Spectrometric Method Second Edition
Caprolactam for Industrial Use - Determination of Volatile Bases Content - Titrimetric Method After Distillation First Edition
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 1: General First Edition; (Corrected and Reprinted 1988) (CEN EN 28662-1: 1992)
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 2: Chipping Hammers and Riveting Hammers
Amendment 1 10-15-1999
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 3: Rock Drills and Rotary Hammers Amendment
1: 10/15/1999
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 4: Grinders First Edition; (CEN EN ISO 8662-4:
1995)
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 5: Pavement Breakers and Hammers for
Construction Work Amendment 1 10-15-1999
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 6: Impact Drills First Edition; (CEN EN ISO 86626: 1995)
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 7: Wrenches, Screwdrivers and Nut Runners with
Impact, Impulse or Ratchet Action First Edition
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 8: Polishers and Rotary, Orbital and Random
Orbital Sanders First Edition
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 6: Rammers First Edition
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 10: Nibblers and Shears First Edition
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 11: Fastener Driving Tools First Edition;
Amendment 1 12/01/2001
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 12: Saws and Files with Reciprocating Action and
Saws with Oscillating or Rotating Action First Edition
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 13: Die Grinders First Edition; Technical
Corrigendum 1-1998
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 14: Stone-Working Tools and Needle Scalers First
Edition
ISO
8664
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8665
8666
8667
8668-1
8668-2
8668-3
8668-4
8668-5
8668-6
8669-1
8669-2
8670-1
8670-2
8670-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8672
8673
8674
8675
8676
8678
8681
8682
8683
8685
8686-1
8686-2
8686-3
8686-4
ISO
8686-5
ISO
8687
Tyres for agricultural tractors and machines Code-designated and service-description marked radial drive-wheel tyres Second
edition
Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations Third Edition
Small craft Principal data First edition
Commercial Vehicles and Buses - Cross-Tooth Gearbox Flanges, Type T Second Edition
Aircraft - Terminal Junction Systems - Part 1: Characteristics First Edition
Aircraft - Terminal Junction Systems - Part 2: Tests First Edition
Aircraft - Terminal Junction Systems - Part 3: Detail Specification for Type 1 System First Edition
Aircraft - Terminal Junction Systems - Part 4: Detail Specification for Type 2 System First Edition
Aircraft - Terminal Junction Systems - Part 5: Detail Specification for Type 3 System First Edition
Aircraft - Terminal Junction Systems - Part 6: Detail Specification for Type 4 System First Edition
Urine Collection Bags Part 1: Vocabulary First Edition
Urine Collection Bags - Part 2: Requirements and Test Methods Second Edition
Ostomy Collection Bags Part 1: Vocabulary First Edition
Ostomy Collection Bags - Part 2: Requirements and Test Methods Second Edition
Ostomy Collection Bags - Part 3: Determination of Odour Transmission of Colostomy and Ileostomy Bags First Edition
Air Quality - Determination of the Number Concentration of Airborne Inorganic Fibres by Phase Contrast Optical Microscopy Membrane Filter Method First Edition
Hexagon Nuts, Style 1, with Metric Fine Pitch Thread - Product Grades A and B Second Edition
Hexagon Nuts, Style 2, with Metric Fine Pitch Thread - Product Grades A and B Second Edition
Hexagon Thin Nuts (Chamfered) with Metric Fine Pitch Thread - Product Grades A and B Second Edition
Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B Second Edition
Cup Head Square Neck Bolts with Small Head and Short Neck - Product Grade B First Edition
Petroleum Products and Lubricants - Method of Classification - Definition of Classes First Edition
Apples - Storage in Controlled Atmospheres First Edition
Lettuce - Guide to Precooling and Refrigerated Transport First Edition
Aluminium Ores - Sampling Procedures First Edition
Cranes - Design Principles for Loads and Load Combinations - Part 1: General First Edition
Cranes Design principles for loads and load combinations Part 2: Mobile cranes First Edition
Cranes - Design Principles for Loads and Load Combinations - Part 3: Tower Cranes First Edition
Cranes Design principles for loads and load combinations Part 4: Jib cranes First Edition
Cranes - Design Principles for Loads and Load Combinations - Part 5: Overhead Travelling and Portal Bridge Cranes First Edition
Cinematography - Signal-to-Noise Ratio of 8 mm Type S, 16 mm and 35 mm Variable-Area Photographic Sound Records - Method of
Measurement First Edition
ISO
ISO
8688-1
8688-2
ISO
8689-1
ISO
8689-2
ISO
8690
ISO
ISO
ISO
ISO
ISO
8691
8692
8693
8694
8695
ISO
ISO
ISO
ISO
ISO
ISO
8697
8705
8706
8709
8710
8713
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8714
8715
8716
8717
8718
8720
8721
ISO
ISO
ISO
ISO
ISO
ISO
8723
8724
8727
8728
8729
8733
Tool Life Testing in Milling - Part 1: Face Milling First Edition
Tool Life Testing in Milling - Part 2: End Milling First Edition
Water Quality - Biological Classification of Rivers - Part 1: Guidance on the Interpretation of Biological Quality Data from Surveys of
Benthic Macroinvertebrates First Edition
Water Quality - Biological Classification of Rivers - Part 2: Guidance on the Presentation of Biological Quality Data from Surveys of
Benthic Macroinvertebrates First Edition
Decontamination of Radioactively Contaminated Surfaces - Method for Testing and Assessing the Ease of Decontamination First
Edition
Petroleum Products - Low Levels of Vanadium in Liquid Fuels - Determination by Flameless Atomic Absorption Spectrometry After
Ashing First Edition
Water quality Freshwater algal growth inhibition test with unicellular green algae Second Edition
Tools for Moulding - Flat Ejector Pins Second Edition
Tools for Moulding - Shouldered Ejector Pins Second Edition
Tools for Pressing - Punches - Nomenclature and Terminology First Edition
Crude Petroleum and Petroleum Products - Transfer Accountability - Assessment of on Board Quantity (OBQ) and Quantity
Remaining on Board (ROB) First Edition; Supersedes TR 8338: 1988
Mopeds - Measurement method for location of centre of gravity Second Edition
Two-Wheeled Mopeds - Parking Stability of Side- and Centre-Stands First Edition
Mopeds - Brakes and Braking Devices - Tests and Measurement Methods First Edition; Technical Corrigendum 1-1998
Motorcycles - Brakes and Braking Devices - Tests and Measurement Methods First Edition
Electric road vehicles Vocabulary VÚhicules routiers Úlectriques Vocabulaire Second Edition
Electric road vehicles Reference energy consumption and range Test procedures for passenger cars and light commercial vehicles
Electric Road Vehicles - Road Operating Characteristics First Edition
Road Vehicles - Fifth Wheel Kingpins - Strength Test Second Edition
Commercial Road Vehicles - Fifth Wheel Couplings - Strength Tests Second Edition
Road Vehicles - Drawbar Couplings and Eyes for Hinged Drawbars - Strength Tests Second Edition
Passenger Cars - Specifications for Mechanical Jacks First Edition
Road Vehicles - Measurement Techniques in Impact Tests - Optical Instrumentation First Edition
Carbonaceous Materials for the Production of Aluminium - Calcined Coke - Determination of Oil Content - Method by Solvent
Extraction First Edition
Cork Decorative Panels - Specification First Edition
Mechanical Vibration and Shock - Human Exposure - Biodynamic Coordinate Systems First Edition
Ships and Marine Technology - Marine Gyro-Compasses Second Edition
Ships and Marine Technology - Marine Radar Reflectors Second Edition
Parallel Pins with Internal Thread, of Unhardened Steel and Austenitic Stainless Steel Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8734
8735
8736
8737
8738
8739
8740
8741
8742
8743
8744
8745
8746
8747
8748
8749
8750
8752
8754
8755
8756
ISO
ISO
8758
8759-1
ISO
8759-2
ISO
8760
ISO
ISO
ISO
8761
8762
8764-1
ISO
ISO
ISO
8764-2
8765
8768
Parallel Pins, of Hardened Steel and Martensitic Stainless Steel (Dowel Pins)
Parallel Pins with Internal Thread, of Hardened Steel and Martensitic Stainless Steel Second Edition
Taper Pins with Internal Thread, Unhardened First Edition
Taper Pins with External Thread, Unhardened First Edition
Plain Washers for Clevis Pins - Product Grade A First Edition
Grooved Pins - Full-Length Parallel Grooved, with Pilot Second Edition
Grooved Pins - Full-Length Parallel Grooved, with Chamfer Second Edition
Grooved Pins - Half-Length Reverse Taper Grooved Second Edition
Grooved Pins - One-Third-Length Centre Grooved Second Edition
Grooved Pins - Half-Length Centre Grooved Second Edition
Grooved Pins - Full-Length Taper Grooved Second Edition
Grooved Pins - Half-Length Taper Grooved Second Edition
Grooved Pins with Round Head Second Edition
Grooved Pins with Countersunk Head Second Edition
Spring-type straight pins ù Coiled, heavy duty Third edition
Pins and Grooved Pins - Shear Test First Edition
Spring-type straight pins ù Coiled, standard duty Third edition
Spring-Type Straight Pins, Slotted, Heavy Duty Second Edition
Petroleum Products - Determination of Sulfur Content - Energy-Dispersive X-Ray Fluorescence Method Second Edition
Commercial Road Vehicles - 40 mm Drawbar Eye - Interchangeability Second Edition
Air Quality - Handling of Temperature, Pressure and Humidity Data First Edition
Cinematography - Photographic Control and Data Records on 16 mm and 35 mm Motion-Picture Film and Prints - Dimensions and
Location First Edition
Agricultural Wheeled Tractors - Front-Mounted Equipment - Part 1: Power Take-Off and Three-Point Linkage Second Edition
Agricultural Wheeled Tractors - Front-Mounted Equipment - Part 2: Stationary Equipment Connection Second Edition; This Edition is
a Complement to ISO 8759-1: 1998, Which is Itself a Technical Revision of ISO 8759: 1985 and ISO 8759-2: 1985
Work-Place Air - Determination of Mass Concentration of Carbon Monoxide - Method Using Detector Tubes for Short-Term Sampling
with Direct Indication First Edition
Work-Place Air - Determination of Mass Concentration of Nitrogen Dioxide - Method Using Detector Tubes for Short-Term Sampling
with Direct Indication First Edition
Workplace Air - Determination of Vinyl Chloride - Charcoal Tube/Gas Chromatographic Method First Edition
Assembly tools for screws and nuts Screwdrivers for cross-recessed head screws Part 1: Driver tips Third Edition
Assembly tools for screws and nuts Screwdrivers for cross-recessed head screws Part 2: General requirements, lengths of blades
and marking of hand-operated screwdrivers Second Edition
Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B Second Edition
Packaging - Complete, Filled Transport Packages - Toppling Test First Edition; (CEN EN 28768: 1992)
ISO
8769
ISO
8769-2
ISO
ISO
ISO
8770
8772
8773
ISO
ISO
ISO
ISO
8775
8777
8778
8779
ISO
8780-1
ISO
8780-2
ISO
8780-3
ISO
8780-4
ISO
8780-5
ISO
8780-6
ISO
8781-1
ISO
8781-2
ISO
ISO
8781-3
8783
ISO
8784-1
ISO
8785
Reference Sources for the Calibration of Surface Contamination Monitors - Beta-Emitters (Maximum Beta Energy Greater Than 0,15
MeV) and Alpha-Emitters First Edition
Reference Sources for the Calibration of Surface Contamination Monitors - Part 2: Electrons of Energy Less Than 0,15 MeV and
Photons of Energy Less Than 1,5 MeV First Edition
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polyethylene (PE) Second Edition
Plastics piping systems for non-pressure underground drainage and sewerage Polyethylene (PE) Second Edition
Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene (PP) Second Edition
Aerospace - Gaseous Oxygen Replenishment Connection for Use in Fluid Systems (New Type) - Dimensions (Inch Series) First
Edition
Information and Documentation - Commands for Interactive Text Searching First Edition
Pneumatic Fluid Power - Standard Reference Atmosphere Second Edition
Polyethylene (PE) Pipes for Irrigation Laterals - Specifications Second Edition
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 1: Introduction First Edition;
(CEN EN ISO 8780-1: 1995)
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 2: Dispersion Using an
Oscillatory Shaking Machine First Edition; (CEN EN ISO 8780-2: 1995)
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 3: Dispersion Using a HighSpeed Impeller Mill First Edition
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 4: Dispersion Using a Bead Mill
First Edition; (CEN EN ISO 8780-4: 1995)
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 5: Dispersion Using an
Automatic Muller First Edition; (CEN EN ISO 8780-5: 1995)
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 6: Dispersion Using a TripleRoll Mill First Edition; (CEN EN ISO 8780-6: 1995)
Pigments and Extenders - Methods of Assessment of Dispersion Characteristics - Part 1: Assessment from the Change in Tinting
Strength of Coloured Pigments First Edition
Pigments and Extenders - Methods of Assessment of Dispersion Characteristics - Part 2: Assessment from the Change in Fineness
of Grind First Edition; (CEN EN ISO 8781-2: 1995)
Pigments and Extenders - Methods of Assessment of Dispersion Characteristics - Part 3: Assessment from the Change in Gloss First
Edition
Alpine Skis - Guidelines for Conducting Slope Performance Tests First Edition
Pulp, paper and board Microbiological examination - Part 1: Total count of bacteria, yeast and mould based on disintegration Second
Edition
Geometrical Product Specification (GPS) - Surface Imperfections - Terms, Definitions and Parameters Specification Geometrique
Des Produits (GPS) - Imperfections De Surface - Termes, Definitions Et Parametres First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8787
8788
8789
8790
8791-1
8791-2
8791-3
8791-4
8792
8793
8794
ISO
8795
ISO
8796
ISO
ISO
8799
8751
ISO
8802-2
ISO
8802-3
ISO
8802-3 DAM 2
ISO
8802-3 DAM 3
ISO
8802-3 DAM 4
Paper and Board - Determination of Capillary Rise - Klemm Method First Edition
Aerospace - Nuts, Metric - Tolerances of Form and Position Second Edition
Rubber Hoses and Hose Assemblies for Liquefied Petroleum Gas in Motor Vehicles - Specification First Edition
Information Processing Systems - Computer System Configuration Diagram Symbols and Conventions First Edition
Paper and Board - Determination of Roughness/Smoothness (Air Leak Methods) - Part 1: General Method First Edition
Paper and Board - Determination of Roughness/Smoothness (Air Leak Methods) - Part 2: Bendtsen Method First Edition
Paper and board Determination of roughness/smoothness (air leak methods) Part 3: Sheffield method Second edition
Paper and Board - Determination of Roughness/Smoothness (Air Leak Methods) - Part 4: Print-Surf Method First Edition
Wire Ropes Slings - Safety Criteria and Inspection Procedures for Use First Edition
Steel Wire Ropes - Ferrule-Secured Eye Terminations First Edition
Steel Wire Ropes - Spliced Eye Terminations for Slings First Edition
Plastics Piping Systems for the Transport of Water Intended for Human Consumption - Migration Assessment - Determination of
Migration Values for Plastics Pipes and Fittings and Their Joints Third Edition
Polyethylene PE 32 and PE 40 pipes for irrigation laterals Susceptibility to environmental stress cracking induced by insert-type
fittings Test method and requirements Second Edition
Surface Active Agents - Sulfated Ethoxylated Alcohols and Alkylphenols - Determination of Content of Unsulfated Matter First Edition;
(CEN EN ISO 8799: 1995)
Spring-type straight pins ù Coiled, light duty Third edition
Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks Specific Requirements - Part 2: Logical Link Control Third Edition; ANSI/IEEE 802.2; Technical Corrigendum 1: 10/01/2000
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks Specific Requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical
Layer Specifications Sixth Edition; Supersedes IEEE Std. 802.3
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks
Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA-CD) Access Method and Physical Layer
Specifications Amendment 2: Data Terminal Equipment (DTE) Power Via Media Dependent Interface (MDI)
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks
Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer
specifications IEEE Std 802.3aj:2003
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks
Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer
specifications IEEE Std 802.3ak:2004
ISO
8802-5
ISO
8802-6
ISO
8802-11 AMD 6
ISO
8802-11 AMD 5
ISO
8802-11 AMD 4
ISO
8802-11
Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks Specific Requirements - Part 5: Token Ring Access Method and Physical Layer Specifications Third Edition; Amendment 1:
09/15/1998; ANSI/IEEE Std 802.5
Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks Specific Requirements - Part 6: Distributed Queue Dual Bus (DQDB) Access Method and Physical Layer Specifications First Edition;
IEEE 802.6: 1994
Information technology ù Telecommunications and information exchange between systems ù Local and metropolitan area networks ù
Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications AMENDMENT
6: Medium Access Control (MAC) Security Enhancements Second Edition; Same as IEEE STD 8802.11
Information technology ù Telecommunications and information exchange between systems ù Local and metropolitan area networks ù
Specific requirements ù Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications
AMENDMENT 5: Spectrum and Transmit Power Management Extensions in the 5 GHz band in Europe Second Edition; Same as
IEEE STD 8802.11
Information technology ù Telecommunications and information exchange between systems ù Local and metropolitan area networks ù
Specific requirements ù Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications
AMENDMENT 4: Further Higher Data Rate Extension in the 2.4 GHz Band Second Edition; Same as IEEE STD 8802.11
Information technology ù Telecommunications and information exchange between systems ù Local and metropolitan area networks ù
Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Second Edition;
IEEE STD 802.11
ISO
8802-11 DAM 7
ISO
8805
ISO
8806-4
ISO
8807
ISO
ISO
8811
8812
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks
Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications AMENDMENT
7: Specifications for Enhanced Security WLAN Authentication and Privacy Infrastructure (WAPI) First Edition
Information Processing Systems - Computer Graphics - Graphical Kernel System for Three Dimensions (GKS-3D) Functional
Description First Edition
Information Technology - Computer Graphics - Graphical Kernel System for Three Dimensions (GKS-3D) Language Bindings - Part
4: C First Edition
Information Processing Systems - Open Systems Interconnection - LOTOS - a Formal Description Technique Based on the Temporal
Ordering of Observational Behaviour First Edition
Earth-Moving Machinery - Rollers and Compactors - Terminology and Commercial Specifications First Edition; Technical
Corrigendum 1: 02/01/2002
Earth-Moving Machinery - Backhoe Loaders - Definitions and Commercial Specifications First Edition
ISO
8813
Earth-Moving Machinery - Lift Capacity of Pipelayers and Wheeled Tractors or Loaders Equipped with Side Boom First Edition
ISO
ISO
ISO
8815
8816
8818
ISO
ISO
ISO
ISO
8819
8820-1
8820-2
8820-3
ISO
8820-4
ISO
ISO
ISO
ISO
8820-5
8820-6
8820-7
8821
ISO
8822
ISO
8823-1
ISO
8823-2
ISO
ISO
8824-1 AMD 3
8824-1 CORR 1
ISO
8824-1 AMD 2
ISO
ISO
8824-1 AMD 1
8824-1
ISO
8824-2 CORR 1
ISO
ISO
ISO
8824-2 AMD 1
8824-2
8824-3
Aircraft - Electrical Cables and Cable Harnesses - Vocabulary First Edition; Corrected and Reprinted 10/15/1998
Aircraft - Solid-State Remote Power Controllers - General Requirements First Edition
Leisure Accommodation Vehicles - Caravans - 12 V Direct Current Extra Low Voltage Electrical Installations First Edition
Liquefied Petroleum Gases - Detection of Hydrogen Sulfide - Lead Acetate Method Second Edition; (CEN EN ISO 8819: 1995)
Road Vehicles - Fuse-Links - Part 1: Definitions and General Test Requirements Second Edition
Road vehicles Fuse-links Part 2: User s guide Second Edition
Road vehicles Fuse-links Part 3: Fuse-links with tabs (blade type) Second Edition
Road Vehicles - Fuse Links - Part 4: Fuse-Links with Female Contacts (Type A) and Bolt-in Contacts (Type B) and Their Test Fixtures
First Edition
Road vehicles ù Fuse-links ù Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures First
Edition
Road vehicles ù Fuse-links ù Part 6: Single-bolt fuse-links First Edition
Road vehicles ù Fuse-links ù Part 7: Fuse-links with tabs (Type G) with rated voltage of 450 V First edition
Mechanical Vibration - Balancing - Shaft and Fitment Key Convention First Edition; (NZS/ISO 8821: 1989)
Information Technology - Open Systems Interconnection - Presentation Service Definition Second Edition; Amendment 1: Efficiency
Enhancements: 10-01-1998; Amendment 2: Nested Connections Functional Unit: 12-15-1998
Information Technology - Open Systems Interconnection - Connection-Oriented Presentation Protocol: Protocol Specification Second
Edition; Amendment 1: Efficiency Enhancements: 09-15-1998; Amendment 2: Nested Connections Functional Unit: 12-15-1998
Information Technology - Open Systems Interconnection - Connection-Oriented Presentation Protocol: Protocol Implementation
Conformance Statement (PICS) Proforma Second Edition
Information technology ù Abstract Syntax Notation One (ASN.1): Specification of basic notation AMENDMENT 3: Time type support
Third Edition
Information technology ù Abstract Syntax Notation One (ASN.1): Specification of basic notation Third Edition
Information technology ù Abstract Syntax Notation One (ASN.1): Specification of basic notation AMENDMENT 2: Alignment with
changes made to ITU-T Rec. X.660 ISO/IEC 9834-1 for identifiers in object identifier value notation Third Edition
Information technology ù Abstract Syntax Notation One (ASN.1): Specification of basic notation AMENDMENT 1: Support for
EXTENDED-XER Third Edition
Information technology ù Abstract Syntax Notation One (ASN.1): Specification of basic notation Third Edition
Information technology ù Abstract Syntax Notation One (ASN.1): Information object specification TECHNICAL CORRIGENDUM 1
Third Edition
Information technology ù Abstract Syntax Notation One (ASN.1): Information object specification AMENDMENT 1: Support for
EXTENDED-XER Third Edition
Information technology ù Abstract Syntax Notation One (ASN.1): Information object specification Third Edition
Information Technology - Abstract Syntax Notation One (ASN.1): Constraint Specification Third Edition
ISO
8824-4
ISO
8825-1 AMD 1
ISO
8825-1
ISO
8825-1 FDAM 2
ISO
8825-2 AMD 2
ISO
8825-2 CORR 2
ISO
8825-2 CORR 1
ISO
ISO
8825-2 AMD 1
8825-2
ISO
8825-3 AMD 2
ISO
8825-3 CORR 1
ISO
ISO
8825-3 AMD 1
8825-3
ISO
ISO
ISO
8825-4 AMD 2
8825-4 AMD 1
8825-4
ISO
ISO
ISO
ISO
ISO
ISO
8825-5 CORR 1
8825-5
8826-1
8826-2
8827
8828
ISO
8829-2
Information Technology - Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 Specifications Third Edition
Information technology ù ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and
Distinguished Encoding Rules (DER) AMENDMENT 1: Support for EXTENDED-XER Third Edition
Information technology ù ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and
Distinguished Encoding Rules (DER) Third Edition
Information technology ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and
Distinguished Encoding Rules (DER)
Information technology ù ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) ù AMENDMENT 2: Time type support
Third Edition
Information technology ù ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) TECHNICAL CORRIGENDUM 2
Third Edition
Information technology ù ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) TECHNICAL CORRIGENDUM 1
Third Edition
Information technology ù ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) AMENDMENT 1: Support for
EXTENDED-XER Third Edition
Information technology ù ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) Third Edition
Information technology ù ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) AMENDMENT 2 First Edition
Information technology ù ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) TECHNICAL CORRIGENDUM 1
First Edition
Information technology ù ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) AMENDMENT 1: Extensibility
support First Edition
Information technology ù ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) First Edition
Information technology ù ASN.1 encoding rules: XML Encoding Rules (XER) AMENDMENT 2: Time type support First Edition
Information technology ù ASN.1 encoding rules: XML Encoding Rules (XER) AMENDMENT 1: EXTENDED-XER First Edition
Information technology ù ASN.1 encoding rules: XML Encoding Rules (XER) First Edition
Information technology ù ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 TECHNICAL CORRIGENDUM 1
First Edition
Information technology ù ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 First Edition
Technical Drawings - Rolling Bearings - Part 1: General Simplified Representation First Edition; (CEN EN ISO 8826-1: 1995)
Technical Drawings - Rolling Bearings - Part 2: Detailed Simplified Representation First Edition
Implants for Surgery - Staples with Parallel Legs for Orthopaedic Use - General Requirements First Edition
Implants for Surgery - Guidance on Care and Handling of Orthopaedic Implants First Edition
Aerospace Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Part 2: Non-metallic braid First
Edition;:1990
ISO
ISO
ISO
8830
8833
8835-2
High-Speed Steel Machine Taps with Ground Threads - Technical Specifications First Edition
Magnetite for Use in Coal Preparation - Test Methods First Edition
Inhalational anaesthesia systems - Part 2: Anaesthetic breathing systems Third Edition
Inhalational anaesthesia systems ù Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems Second
Edition
Inhalational anaesthesia systems Part 4: Anaesthetic vapour delivery devices First Edition
Inhalational Anaesthesia Systems - Part 5: Anaesthetic Ventilators First Edition
Suction Catheters for Use in the Respiratory Tract Third Edition
Mechanical Properties of Fasteners - Bolts, Screws, Studs and Nuts Made of Non-Ferrous Metals First Edition
Refractory Materials - Determination of Bulk Density of Granular Materials (Grain Density) First Edition
Dense, Shaped Refractory Products - Determination of Permeability to Gases First Edition
Aircraft - Crimp-removable contacts for electrical connectors - Identification system Second Edition
Small Craft with Inboard Engine - Propeller Shaft Ends and Bosses with 1:16 Taper First Edition; Corrigendum 1: 1995
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8835-3
8835-4
8835-5
8836
8839
8840
8841
8843
8845
ISO
ISO
ISO
ISO
8846
8847
8848
8849
ISO
8851-1
ISO
8851-2
Small Craft - Electrical Devices - Protection Against Ignition of Surrounding Flammable Gases First Edition; (CEN EN 28846: 1993)
Small Craft - Steering Gear - Cable and Pulley Systems Second Edition
Small Craft - Remote Steering Systems First Edition; (CEN EN 28848: 1993)
Small craft Electrically operated directcurrent bilge pumps Second Edition
Butter Determination of moisture, non-fat solids and fat contents (Routine methods) Part 1: Determination of moisture content First
Edition; IDF 191-1: 2004
Butter Determination of moisture, non-fat solids and fat contents (Routine methods) Part 2: Determination of non-fat solids content
First Edition; IDF 191-2: 2004
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8851-3
8853
8854
8855
8858-2
8858-3
8859-1
8859-2
8859-3
8859-4
8859-5
8859-6
8859-7
Butter Determination of moisture, non-fat solids and fat contents (Routine methods) Part 3: Calculation of fat content First Edition
Safety Harnesses for Competition Drivers - Requirements and Test Methods First Edition
Road Vehicles - Alternators with Regulators - Test Methods and General Requirements First Edition
Road Vehicles - Vehicle Dynamics and Road-Holding Ability - Vocabulary First Edition
Hard coal Froth flotation testing Part 2: Sequential evaluation First Edition
Hard coal Froth flotation testing Part 3: Release evaluation First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 1: Latin Alphabet No. 1 First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 2: Latin Alphabet No. 2 First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 3: Latin Alphabet No.3 First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 4: Latin Alphabet No. 4 First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 5: Latin/Cyrillic Alphabet Second Edition
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 6: Latin/Arabic Alphabet First Edition
Information technology 8-bit single-byte coded graphic character sets Part 7: Latin/Greek alphabet First Edition
ISO
ISO
ISO
ISO
ISO
8859-8
8859-9
8859-10
8859-11
8859-13
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 8: Latin/Hebrew Alphabet First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 9: Latin Alphabet No. 5 Second Edition
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 10: Latin Alphabet No. 6 Second Edition
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 11: Latin/Thai Alphabet First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 13: Latin Alphabet No.7 First Edition
ISO
ISO
ISO
8859-14
8859-15
8859-16
ISO
8860-1
ISO
8860-2
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 14: Latin Alphabet No.8 (Celtic) First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 15: Latin Alphabet No. 9 First Edition
Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 16: Latin Alphabet No. 10 First Edition
Information Processing - Data Interchange on 90 mm (3.5 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 7 958 ftprad on 80 Tracks on Each Side - Part 1: Dimensional, Physical and Magnetic Charactistics First Edition;
Corrigendum 1-1990
Information Processing - Data Interchange on 90 mm (3.5 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 7 958 ftprad on 80 Tracks on Each Side - Part 2: Track Format First Edition; Corrigendum 1-1990
ISO
8861
ISO
ISO
ISO
ISO
ISO
8862
8863
8864
8866
8868
ISO
8870
ISO
8871-1
ISO
8871-2 AMD 1
ISO
8871-2
ISO
8871-3
ISO
8871-4
Milk and milk-based products Detection of thermonuclease produced by coagulase-positive staphylococci First Edition; IDF 83
Elastomeric parts for parenterals and for devices for pharmaceutical use Part 1: Extractables in aqueous autoclavates First Edition;
Together with ISO 8871-2 thru ISO 8871-5 replaces ISO 8871
Elastomeric parts for parenterals and for devices for pharmaceutical use ù Part 2: Identification and characterization AMENDMENT 1
First Edition
Elastomeric parts for parenterals and for devices for pharmaceutical use ù Part 2: Identification and characterization First Edition;
Together with ISO 8871-1 and ISO 8871-3 thru ISO 8871-5 replaces ISO 8871
Elastomeric parts for parenterals and for devices for pharmaceutical use Part 3: Determination of released-particle count First
Edition; Together with ISO 8871-1, ISO 8871-2, ISO 8871-4 and ISO 8871-5 replaces ISO 8871
Elastomeric parts for parenterals and for devices for pharmaceutical use Part 4: Biological requirements and test methods First
Edition; Together with ISO 8871-1 thru ISO 8871-3 and ISO 8871-5 replaces ISO 8871: 1990
ISO
8871-5
Elastomeric parts for parenterals and for devices for pharmaceutical use Part 5: Functional requirements and testing First Edition
Shipbuilding - Engine-Room Ventilation in Diesel-Engined Ships - Design Requirements and Basis of Calculations Second Edition
Air-Conditioning and Ventilation of Machinery Control-Rooms on Board Ships - Design Conditions and Basis of Calculations First
Edition
Ship s Wheelhouse Windows - Heating by Hot Air of Glass Panes First Edition
Air-Conditioning and Ventilation of Wheelhouse on Board Ships - Design Conditions and Basis of Calculations First Edition
Rotary Core Diamond Drilling Equipment - System C First Edition; Corrigendum 1: 1991; Corrigendum 2: 1992
Fluorspar - Sampling and Sample Preparation First Edition; Amendment 1-1996
ISO
8872
Aluminium Caps for Transfusion, Infusion and Injection Bottles - General Requirements and Test Methods Second Edition
Rigid cellular plastics Spray-applied polyurethane foam for thermal insulation Part 1: Material specifications First Edition; Together
with ISO 8873-2 and ISO 8873-3 replaces ISO 8873:1987 [Replaced: ISO 8873]
Rigid cellular plastics ù Spray-applied polyurethane foam for thermal insulation ù Part 2: Application First Edition [Replaced: ISO
8873]
Rigid cellular plastics ù Spray-applied polyurethane foam for thermal insulation ù Part 3: Test methods First Edition [Replaced: ISO
8873]
Grades of Fluorspar - Determination of Moisture Content of a Lot Second Edition
Fluorspar - Determination of Particle Size Distribution by Sieving First Edition; Corrigendum 1: 1991
ISO
8873-1
ISO
8873-2
ISO
ISO
ISO
8873-3
8875
8876
ISO
8877
ISO
8878
ISO
8879
ISO
8881
ISO
8882-1
ISO
8882-2
ISO
ISO
ISO
ISO
ISO
8882-3
8886
8889
8890
8892
Information Technology - Telecommunications and Information Exchange between Systems - Interface Connector and Contact
Assignments for ISDN Basic Access Interface Located at Reference Points S and T Second Edition; CEN EN 28877: 1993
Information Technology - Telecommunications and Information Exchange between Systems - Use of X.25 to Provide the OSI
Connection-Mode Network Service Second Edition; Corrigendum 1-1993; Corrigendum 2-1993; AS/NZS 3604: 1994; Corrigendum 31996; CAN/CSA-ISO/IEC 8878-95
Information Processing - Text and Office Systems - Standard Generalized Markup Language (SGML) First Edition; Amendment 1:
07/01/1988; Technical Corrigendum 1: 12/15/1996; Technical Corrigendum 2: 11/01/1999
Information Processing Systems - Data Communications - Use of the X.25 Packet Level Protocol in Local Area Networks First
Edition; Corrigendum 1-1991
Information Technology - Telecommunications and Information Exchange between Systems - X.25 DTE Conformance Testing - Part
1: General Principles Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - X.25 DTE Conformance Testing - Part
2: Data Link Layer Conformance Test Suite Third Edition
Information Technology - Telecommunications and Information Exchange between Systems - X.25 DTE Conformance Testing - Part
3: Packet Layer Conformance Test Suite Third Edition
Information Technology - Open Systems Interconnection - Data Link Service Definition Second Edition
Chromium Ores and Concentrates - Determination of Aluminium Content - Complexometric Method First Edition
Dense Shaped Refractory Products - Determination of Resistance to Sulfuric Acid First Edition
Oilseed Residues - Determination of Total Residual Hexane First Edition
ISO
ISO
ISO
ISO
ISO
ISO
8893
8894-1
8894-2
8895
8896
8897
Forestry Machinery - Portable Brush-Cutters and Grass-Trimmers - Engine Performance and Fuel Consumption Second Edition
Refractory Materials - Determination of Thermal Conductivity - Part 1: Hot-Wire Method (Cross-Array) First Edition
Refractory Materials - Determination of Thermal Conductivity - Part 2: Hot-Wire Method (Parallel) First Edition
Shaped Insulating Refractory Products - Determination of Cold Crushing Strength Second Edition
Oil of Caraway (Carum carvi Linnaeus) First Edition
Oil of Juniper Berry (Juniperus Communis Linnaeus) First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8898
8899
8900
8901
8902
8903
8904
8905
8906
8909-1
8909-2
8909-3
8910
8912
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8913
8914
8918
8925
8927
8930
8935
ISO
8936
ISO
8940
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8943
8945
8947
8954-1
8954-2
8954-3
8956
Oil of mandarin petitgrain (Citrus reticulata Blanco) First Edition
Oil of lemon petitgrain [Citrus limon (L.) Burm. f.] Second Edition
Oil of Bergamot Petitgrain [Citrus bergamia (Risso et Poit.)] Second Edition
Oil of Bitter Orange Petitgrain, Cultivated (Citrus Aurantium L.) Second Edition
Oil of Lavandin Grosso (Lavandula Angustifolia Miller X Lavandula Latifolia (L.f.) Medikus), French Type Second Edition
Broadleaved Sawn Timber - Nominal Sizes First Edition
Broadleaved Sawn Timber - Sizes - Methods of Measurement First Edition
Sawn Timber - Test Methods - Determination of Ultimate Strength in Shearing Parallel to Grain First Edition
Sawn Timber - Test Methods - Determination of Resistance to Local Transverse Compression First Edition
Forage Harvesters - Part 1: Vocabulary First Edition
Forage Harvesters - Part 2: Specification of Characteristics and Performance First Edition
Forage Harvesters - Part 3: Test Methods First Edition
Machinery and Equipment for Working the Soil - Mouldboard Plough Working Elements - Vocabulary Second Edition
Equipment for Working the Soil - Roller Sections - Coupling and Section Width First Edition
Aerospace Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 F/3 000 psi (204 C/20 684 kPa) and
204 C/21 000 kPa (400 F/3 046 psi) Procurement specification Third edition
Microbiology - General Guidance for the Detection of Vibrio Parahaemolyticus
Fluorspar - Technical Grades - Chemical Composition and Physical Characteristics First Edition
Earth-Moving Machinery - Diagnostic Ports First Edition; Amendment 1-1997
Earth-Moving Machinery - Machine Availability - Vocabulary First Edition
General Principles on Reliability for Structures - List of Equivalent Terms First Edition; (PNS 1094: 1992)
Tractors for Agriculture and Forestry - Mountings and Apertures for External Equipment Controls First Edition
Awnings for leisure accommodation vehicles ù Requirements and test methods Third edition [Superseded: ISO 8937, ISO 8937]
Aerospace - Nuts, Anchor, Self-Locking, Sealing, Floating, Two-Lug, with Counterbore with MJ Threads, Classifications 900 MPa (at
Ambient Temperature)/ 120 Degrees Celsius, 900 MPa (at Ambient Temperature)/175 Degrees Celsius and 900 MPa (at Ambient
Temperature)/235 Degrees Celsius Dimensions Second Edition
Refrigerated light hydrocarbon fluids ù Sampling of liquefied natural gas ù Continuous and intermittent methods Second Edition
Equipment for Working the Soil - Rotary Cultivator Blades - Fixing Dimensions First Edition
Agricultural Machinery - Equipment for Working the Soil - S-Tines: Test Method First Edition
Ferroalloys - Vocabulary - Part 1: Materials First Edition
Ferroalloys - Vocabulary - Part 2: Sampling and Sample Preparation First Edition
Ferroalloys - Vocabulary - Part 3: Sieve Analysis First Edition
Acceptance Conditions for Copying Attachments, Integral or Otherwise, for Lathes - Testing of the Accuracy First Edition
ISO
8957
ISO
ISO
ISO
ISO
ISO
ISO
8960
8965
8966
8967
8968-1
8968-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8968-3
8968-4
8968-5
8969
8970
8973
8974
8975
8976
8977
8979
ISO
8980-1 CORR 1
ISO
8980-1
ISO
ISO
ISO
8980-2 CORR 1
8980-2
8980-3
ISO
8980-4
ISO
ISO
ISO
ISO
8980-5
8981
8984-1
8984-2
Information and Documentation - Hebrew Alphabet Coded Character Sets for Bibliographic Information Interchange First Edition
Refrigerators, Frozen- Food Storage Cabinets and Food Freezers for Household and Similar Use - Measurement of Emission of
Airborne Acoustical Noise First Edition; (CEN EN 28960: 1993)
Logging Industry - Technology - Terms and Definitions First Edition
Logging Industry - Products - Terms and Definitions First Edition
Dried milk and dried milk products Determination of bulk density Second Edition; IDF 134
Milk - Determination of Nitrogen Content - Part 1: Kjeldahl Method First Edition; IDF 20-1
Milk - Determination of Nitrogen Content - Part 2: Block-Digestion Method (Macro Method) First Edition; IDF 20-2
Milk Determination of nitrogen content Part 3: Block-digestion method (Semi-micro rapid routine method) First Edition; IDF 20-3
Milk - Determination of Nitrogen Content - Part 4: Determination of Non-Protein-Nitrogen Content First Edition; IDF 20-4
Milk - Determination of Nitrogen Content - Part 5: Determination of Protein-Nitrogen Content First Edition; IDF 20-5
Timber Structures - Testing of Unilateral Punched Metal Plate Fasteners and Joints First Edition
Timber Structures - Testing of Joints Made with Mechanical Fasteners - Requirements for Wood Density First Edition
Liquefied Petroleum Gases - Calculation Method for Density and Vapour Pressure First Edition
Plastics - Phenolic Resins - Determination of Residual Phenol Content by Gas Chromatography Third Edition
Plastics - Phenolic Resins - Determination of pH First Edition; (CEN EN ISO 8975: 1995)
Pliers and nippers Multiple slip joint pliers Dimensions and test values Second Edition
Tools for Pressing - Matrixes Second Edition
Pliers and nippers for electronics Nomenclature Pinces pour l'Úlectronique Nomenclature Second Edition
Ophthalmic optics ù Uncut finished spectacle lenses ù Part 1: Specifications for single-vision and multifocal lenses TECHNICAL
CORRIGENDUM 1 Third Edition
Ophthalmic optics ù Uncut finished spectacle lenses ù Part 1: Specifications for single-vision and multifocal lenses Third Edition
Ophthalmic optics ù Uncut finished spectacle lenses ù Part 2: Specifications for progressive power lenses TECHNICAL
CORRIGENDUM 1 Second Edition
Ophthalmic optics ù Uncut finished spectacle lenses ù Part 2: Specifications for progressive power lenses Second Edition
Ophthalmic optics Uncut finished spectacle lenses Part 3:Transmittance specifications and test methods Second Edition
Ophthalmic optics Uncut finished spectacle lenses Part 4: Specifications and test methods for anti-reflective coatings Second
Edition
Ophthalmic optics Uncut finished spectacle lenses Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasionresistant First Edition
Wheat - Identification of Varieties by Electrophoresis First Edition
Diesel Engines - Testing of Fuel Injectors - Part 1: Hand-Lever-Operated Testing and Setting Apparatus Second Edition
Diesel Engines - Testing of Fuel Injectors - Part 2: Test Methods Second Edition
ISO
8985
Plastics - Ethylene/Vinyl Acetate Copolymer (EVAC) Thermoplastics - Determination of Vinyl Acetate Content Second Edition
ISO
8986-1
ISO
ISO
8986-2
8987
ISO
ISO
8988
8989
ISO
ISO
ISO
8990
8991
8992
Plastics - Polybutene (PB) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications First Edition
Plastics - Polybutene (PB) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties
First Edition; Amendment: 06/05/2000
Plastics - Phenolic Resins - Determination of Reactivity on a B-Transformation Test Plate Third Edition
Plastics - Phenolic Resins - Determination of Plastics Phenolic resins Determination of hexamethylenetetramine content Kjeldahl
method, perchloric acid method and hydrochloric acid method Third Edition
Plastics - Liquid Phenolic Resins - Determination of Water Miscibility Second Edition
Thermal Insulation - Determination of Steady-State Thermal Transmission Properties -Calibrated and Guarded Hot Box First Edition
CEN EN ISO 8990: 1996
Designation System for Fasteners First Edition
Fasteners General requirements for bolts, screws, studs and nuts Second Edition
ISO
8993
Anodized Aluminium and Aluminium Alloys - Rating System for the Evaluation of Pitting Corrosion - Chart Method First Edition
ISO
8994
Anodized Aluminium and Aluminium Alloys - Rating System for the Evaluation of Pitting Corrosion - Grid Method First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
8995-3
8995 CORR 1
8995
8996
8999
9000
9001
9004
ISO
9005
ISO
ISO
9006
9008
ISO
ISO
ISO
9009
9010
9011
Lighting of work places Part 3: Lighting requirements for safety and security of outdoor work places First Edition; CIE S 016/E
Lighting of indoor work places TECHNICAL CORRIGENDUM 1 Second Edition
Lighting of indoor work places Second Edition
Ergonomics of the thermal environment Determination of metabolic rate Second Edition
Reciprocating Internal Combustion Engines - Graphical Symbols Second Edition
Quality Management Systems - Fundamentals and Vocabulary Third Edition
Quality Management Systems - Requirements Third Edition; Supersedes ISO 9002:1994 and ISO 9003:1994
Quality Management Systems - Guidelines for Performance Improvements Second Edition; Supersedes ISO 9004-1:1994
Nuclear energy ù Uranium dioxide powder and sintered pellets ù Determination of oxygen/uranium atomic ratio by the amperometric
method Second Edition
Uranium Metal and Uranium Dioxide Powder and Pellets - Determination of Nitrogen Content - Method Using Ammonia- Sensing
Electrode First Edition
Glass Bottles - Verticality - Test Method First Edition (CEN 29008: 1994)
Glass Containers - Height and Non-Parallelism of Finish with Reference to Container Base - Test Methods First Edition (CEN EN
29009: 1994)
Synchronous Belt Drives - Automotive Belts Second Edition
Synchronous Belt Drives - Automotive Pulleys Second Edition
ISO
ISO
9012
9013
Gas Welding Equipment - Air-Aspirated Hand Blowpipes - Specifications and Tests Second Edition
Thermal Cutting - Classification of Thermal Cuts - Geometrical Product Specification and Quality Tolerances Second Edition
ISO
9015-1
Destructive Tests on Welds in Metallic Materials - Hardness Testing - Part 1: Hardness Test on Arc Welded Joints First Edition
ISO
9015-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9016
9017
9018
9019
9021
9022-1
9022-2
9022-3
9022-4
9022-5
9022-6
9022-7
Destructive tests on welds in metallic materials Hardness testing Part 2: Microhardness testing of welded joints First Edition
Destructive Tests on Welds in Metallic Materials - Impact Tests - Test Specimen Location, Notch Orientation and Examination First
Edition
Destructive Tests on Welds in Metallic Materials - Fracture Test First Edition
Destructive tests on welds in metallic materials Tensile test on cruciform and lapped joints First Edition
Securities - Numbering of Certificates Second Edition
Motorcycles - Controls - Types, Positions and Functions First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 1: Definitions, Extent of Testing First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 2: Cold, Heat, Humidity Second Edition
Optics and Optical Instruments - Environmental Test Methods - Part 3: Mechanical Stress Second Edition
Optics and Optical Instruments - Environmental Test Methods - Part 4: Salt Mist Second Edition
Optics and Optical Instruments - Environmental Test Methods - Part 5: Combined Cold, Low Air Pressure First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 6: Dust First Edition
Optics and photonics Environmental test methods Part 7: Resistance to drip or rain Second Edition
ISO
ISO
9022-8
9022-9
ISO
ISO
ISO
9022-10
9022-11
9022-12
ISO
ISO
9022-13
9022-14
ISO
9022-15
ISO
9022-16
Optics and Optical Instruments - Environmental Test Methods - Part 8: High Pressure, Low Pressure, Immersion First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 9: Solar Radiation First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 10: Combined Sinusoidal Vibration and Dry Heat or Cold Second
Edition
Optics and Optical Instruments - Environmental Test Methods - Part 11: Mould Growth First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 12: Contamination First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 13: Combined Shock, Bump or Free Fall and Dry Heat or Cold
Second Edition
Optics and Optical Instruments - Environmental Test Methods - Part 14: Dew, Hoarfrost, Ice First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 15: Combined Digitally Controlled Broad-Band Random Vibration
and Dry Heat or Cold Second Edition
Optics and Optical Instruments - Environmental Test Methods - Part 16: Combined Bounce or Steady-State Acceleration and Dry
Heat or Cold Second Edition
ISO
9022-17
Optics and Optical Instruments - Environmental Test Methods - Part 17: Combined Contamination, Solar Radiation First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 18: Combined Damp Heat and Low Internal Pressure First
Edition
Optics and Optical Instruments - Environmental Test Methods - Part 19: Temperature Cycles Combined with Sinusoidal or Random
Vibration First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 20: Humid Atmosphere Containing Sulfur Dioxide or Hydrogen
Sulfide First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 21: Combined Low Pressure and Ambient Temperature or Dry
Heat First Edition
Raw rubber or unvulcanized compounds ù Determination of green strength Second Edition
Rubber Dissolution by acid digestion Second Edition
Crude Petroleum - Determination of Water - Distillation Method First Edition (CEN EN ISO 9029: 1995)
Crude Petroleum - Determination of Water and Sediment - Centrifuge Method First Edition
Air Cargo Equipment - Handling Systems for Unit Load Devices (ULDs) - Symbols for Pictorial Representation First Edition
Aluminium Ores - Determination of the Moisture Content of Bulk Material First Edition
Hot-Rolled Structural Steel Wide Flats - Tolerances on Dimensions and Shape First Edition
Iron Ores - Determination of Acid-Soluble Iron(II) Content - Titrimetric Method First Edition
Information Processing - Arabic 7-Bit Coded Character Set for Information Interchange First Edition
Test for Sustained Combustibility of Liquids First Edition
Optics and optical instruments Quality evaluation of optical systems Determination of distortion First Edition;
Corrigendum:07/01/2004
Information Technology - Open Systems Interconnection - Virtual Terminal Basic Class Service Second Edition
Information Technology - Open Systems Interconnection - Virtual Terminal Basic Class Protocol - Part 1: Specification Second
Edition
Information Technology - Open Systems Interconnection - Virtual Terminal Basic Class Protocol - Part 2: Protocol Implementation
Conformance Statement (PICS) Proforma Second Edition
ISO
9022-18
ISO
9022-19
ISO
9022-20
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9022-21
9026
9028
9029
9030
9031
9033
9034
9035
9036
9038
ISO
ISO
9039
9040
ISO
9041-1
ISO
9041-2
ISO
ISO
ISO
ISO
9042
9043
9044
9045
ISO
9046
ISO
9047
Steels - Manual Point Counting Method for Statistically Estimating the Volume Fraction of a Constituent with a Point Grid First Edition
Mopeds - Measurement Method for Moments of Inertia First Edition
Industrial Woven Wire Cloth - Technical Requirements and Testing Second Edition
Industrial Screens and Screening - Vocabulary First Edition
Building Construction - Jointing Products - Determination of Adhesion/Cohesion Properties of Sealants at Constant Temperature
Second Edition
Building Construction - Jointing Products - Determination of Adhesion/Cohesion Properties of Sealants at Variable Temperatures
Second Edition
ISO
9048
Building Construction - Jointing Products - Determination of Extrudability of Sealants Using Standardized Apparatus First Edition
Glass in Building - Determination of Light Transmittance, Solar Direct Transmittance, Total Solar Energy Transmittance, Ultraviolet
Transmittance and Related Glazing Factors Second Edition
Glass in Building - Fire-Resistant Glazed Assemblies Containing Transparent or Translucent Glass, for Use in Building Second
Edition
Acoustics - Determination of Dynamic Stiffness - Part 1: Materials Used Under Floating Floors in Dwellings First Edition
ISO
9050
ISO
ISO
9051
9052-1
ISO
ISO
9053
9054
ISO
9055
ISO
ISO
ISO
9057
9058
9059
ISO
9060
ISO
9061
Glass Containers - 28 mm Tamper-Evident Finish for Pressurized Liquids - Dimensions First Edition; Corrigendum 1: 4/1/2006
Glass Containers - Tolerances First Edition
Solar Energy - Calibration of Field Pyrheliometers by Comparison to a Reference Pyrheliometer First Edition
Solar Energy - Specification and Classification of Instruments for Measuring Hemispherical Solar and Direct Solar Radiation First
Edition
Acid-Grade and Ceramic- Grade Fluorspar - Determination of Iron Content - 1,10- Phenanthroline Spectrometric Method Second
Edition
ISO
9062
Acid-Grade and Ceramic- Grade Fluorspar - Determination of Manganese Content - Periodate Spectrometric Method Second Edition
ISO
ISO
9066-1
9066-2
ISO
ISO
9066-3
9069
ISO
9070
ISO
9072-1
ISO
9072-2
ISO
ISO
9072-3
9073-1
Acoustics - Materials for Acoustical Applications - Determination of Airflow Resistance First Edition; (CEN EN 29053 : 1993)
Cellular Plastics, Rigid - Test Methods for Self- Skinned, High-Density Materials First Edition
Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Sulfur Content by the Bomb Method
First Edition
Information Processing Systems - Text Communication - Reliable Transfer - Part 1: Model and Service Definition First Edition
Information Processing Systems - Text Communication - Reliable Transfer - Part 2: Protocol Specification First Edition
Information Technology - Open Systems Interconnection - Reliable Transfer: Protocol Implementation Conformance Statement
(PICS) Proforma First Edition
Information Processing - SGML Support Facilities - SGML Document Interchange Format (SDIF) First Edition
Information Technology - SGML Support Facilities - Registration Procedures for Public Text Owner Identifiers Second Edition; CEN
EN 29070: 1992; AS/NZS 4097: 1993
Information Processing Systems - Text Communication - Remote Operations - Part 1: Model, Notation and Service Definition First
Edition; NZS/ISO/IEC 9072.1: 1989
Information Processing Systems - Text Communication - Remote Operations - Part 2: Protocol Specification First Edition;
NZS/ISO/IEC 9072.2: 1989
Information Technology - Open Systems Interconnection - Remote Operations: Protocol Implementation Conformance Statement
(PICS) Proforma First Edition
Textiles - Test Methods for Nonwovens - Part 1: Determination of Mass per Unit Area First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9073-2
9073-3
9073-4
9073-6
9073-7
9073-8
9073-9
9073-10
9073-11
9073-12
9073-13
9073-14
9073-15
ISO
9073-18
ISO
9075-1 CORR 2
ISO
ISO
9075-1 CORR 1
9075-1
ISO
9075-2 CORR 2
ISO
ISO
9075-2 CORR 1
9075-2
ISO
ISO
9075-3 CORR 1
9075-3
ISO
9075-4 CORR 2
ISO
ISO
9075-4 CORR 1
9075-4
Textiles - Test Methods for Nonwovens - Part 2: Determination of Thickness Second Edition; Technical Corrigendum 1: 12-01-1998
Textiles - Test Methods for Nonwovens - Part 3: Determination of Tensile Strength and Elongation First Edition
Textiles - Test Methods for Nonwovens - Part 4: Determination of Tear Resistance Second Edition
Textiles - Test Methods for Nonwovens - Part 6: Absorption First Edition
Textiles - Test Methods for Nonwovens - Part 7: Determination of Bending Length First Edition
Textiles - Test Methods for Nonwovens - Part 8: Determination of Liquid Strike-Through Time (Simulated Urine) First Edition
Textiles - Test Methods for Nonwovens - Part 9: Determination of Drape Coefficient First Edition
Textiles Test methods for nonwovens Part 10: Lint and other particles generation in the dry state First Edition
Textiles Test methods for nonwovens Part 11: Run-off First Edition
Textiles Test methods for nonwovens Part 12: Demand absorbency First Edition
Textiles Test methods for nonwovens Part 13: Repeated liquid strike-through time First Edition
Textiles Test methods for nonwovens Part 14: Coverstock wetback First Edition
Textiles ù Test methods for nonwovens ù Part 15: Determination of air permeability First Edition
Textiles ù Test methods for nonwovens ù Part 18: Determination of breaking strength and elongation of nonwoven materials using
the grab tensile test First Edition
Information technology ù Database languages ù SQL ù Part 1: Framework (SQL/Framework) TECHNICAL CORRIGENDUM 2
Information technology ù Database languages ù SQL ù Part 1: Framework (SQL/Framework) TECHNICAL CORRIGENDUM 1
Second Edition
Information technology ù Database languages ù SQL ù Part 1: Framework (SQL/Framework) Second Edition
Information technology ù Database languages ù SQL ù Part 2: Foundation (SQL/Foundation) TECHNICAL CORRIGENDUM 2
Information technology ù Database languages ù SQL ù Part 2: Foundation (SQL/Foundation) TECHNICAL CORRIGENDUM 1
Second Edition
Information technology ù Database languages ù SQL ù Part 2: Foundation (SQL/Foundation) Second Edition
Information technology ù Database languages ù SQL ù Part 3: Call-Level Interface (SQL/CLI) TECHNICAL CORRIGENDUM 1 Third
Edition
Information technology ù Database languages ù SQL ù Part 3: Call-Level Interface (SQL/CLI) Third Edition
Information technology ù Database languages ù SQL ù Part 4: Persistent Stored Modules (SQL/PSM) TECHNICAL CORRIGENDUM
2
Information technology - Database languages - SQL - Part 4: Persistent Stored Modules (SQUPSM) TECHNICAL CORRIGENDUM 1
Third Edition
Information technology - Database languages - SQL - Part 4: Persistent Stored Modules (SQUPSM) Third Edition
ISO
9075-5
ISO
ISO
9075-9 CORR 1
9075-9
ISO
9075-10 CORR 2
ISO
ISO
9075-10 CORR 1
9075-10
ISO
9075-11 CORR 2
ISO
9075-11 CORR 1
ISO
9075-11
ISO
9075-13 CORR 1
ISO
9075-13
ISO
ISO
9075-14 CORR 1
9075-14
ISO
ISO
9080
9083
ISO
ISO
9084
9085
ISO
ISO
9086-1
9087
ISO
ISO
9088
9089
Information Technology - Database Languages - SQL - Part 5: Host Language Bindings (SQL/Bindings) First Edition; Corrigendum 1
12/15/2000; Amendment 1: 03/15/2001; Corrigendum 1 to Amendment 1: 06/01/2003; Corrigendum 2: 6/01/2003
Information technology ù Database languages ù SQL ù Part 9: Management of External Data (SQL/MED) TECHNICAL
CORRIGENDUM 1 Second Edition
Information technology ù Database languages ù SQL ù Part 9: Management of External Data (SQL/MED) Second Edition
Information technology ù Database languages ù SQL ù Part 10: Object Language Bindings (SQL/OLB) TECHNICAL
CORRIGENDUM 2 Second Edition
Information technology ù Database languages ù SQL ù Part 10: Object Language Bindings (SQL/OLB) TECHNICAL
CORRIGENDUM 1 Second Edition
Information technology ù Database languages ù SQL ù Part 10: Object Language Bindings (SQL/OLB) Second Edition
Information technology ù Database languages ù SQL ù Part 11: Information and Definition Schemas (SQL/Schemata) TECHNICAL
CORRIGENDUM 2 First Edition
Information technology ù Database languages ù SQL ù Part 11: Information and Definition Schemas (SQL/Schemata) TECHNICAL
CORRIGENDUM 1 First Edition
Information technology ù Database languages ù SQL ù Part 11: Information and Definition Schemas (SQL/Schemata) First Edition
Information technology ù Database languages ù SQL ù Part 13: SQL Routines and Types Using the JavaTM Programming Language
(SQL/JRT) TECHNICAL CORRIGENDUM 1 Second Edition
Information technology ù Database languages ù SQL ù Part 13: SQL Routines and Types Using the JavaTM Programming Language
(SQL/JRT) Second Edition
Information technology ù Database languages ù SQL ù Part 14: XML-Related Specifications (SQL/XML) TECHNICAL
CORRIGENDUM 1 Second Edition
Information technology Database languages SQL Part 14: XML-Related Specifications (SQL/XML) Second Edition
Plastics Piping and Ducting Systems - Determination of the Long-Term Hydrostatic Strength of Thermoplastics Materials in Pipe
Form by Extrapolation First Edition; Replaces ISO TR 9080
Calculation of Load Capacity of Spur and Helical Gears - Application to Marine Gears First Edition
Calculation of Load Capacity of Spur and Helical Gears - Application to High Speed Gears and Gears of Similar Requirements First
Edition
Calculation of Load Capacity of Spur and Helical Gears - Application for Industrial Gears First Edition
Wood - Methods of Physical and Mechanical Testing - Vocabulary - Part 1: General Concepts and Macrostructure First Edition
Wood - Determination of Nail and Screw Holding Power Under Axial Load Application First Edition
Carbonaceous Materials Used for the Production of Aluminium - Cathode Blocks and Prebacked Anodes - Determination of the
Density in Xylene by a Pyknometric Method First Edition
Marine Structures - Mobile Offshore Units - Anchor Winches First Edition
ISO
9090
Gas Tightness of Equipment for Gas Welding and Allied Processes First Edition
ISO
9091-1
Refrigerated Light- Hydrocarbon Fluids - Calibration of Spherical Tanks in Ships - Part 1: Stereo-Photogrammetry First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9091-2
9092
9093-1
9093-2
9094-1
9094-2
9095
ISO
ISO
ISO
ISO
ISO
9096 CORR 1
9096
9097
9098-1
9098-2
Refrigerated Light Hydrocarbon Fluids - Calibration of Spherical Tanks in Ships - Part 2: Triangulation Measurement First Edition
Textiles - Nonwovens - Definition First Edition
Small Craft - Seacocks and Through-Hull Fittings - Part 1: Metallic First Edition
Small Craft - Seacocks and Through-Hull-Fittings - Part 2: Non-Metallic First Edition
Small Craft - Fire Protection - Part 1: Craft with a Hull Length of up to and Including 15 m First Edition
Small craft Fire protection Part 2: Craft with a hull length of over 15 m First Edition
Steel Tubes - Continuous Character Marking and Colour Coding for Material Identification First Edition
Stationary source emissions ù Manual determination of mass concentration of particulate matter TECHNICAL CORRIGENDUM 1
Second Edition
Stationary Source Emissions - Manual Determination of Mass Concentration of Particulate Matter Second Edition
Small Craft - Electric Fans First Edition; (EN ISO 9097:1994)
Bunk Beds for Domestic Use - Safety Requirements and Tests - Part 1: Safety Requirements First Edition
Bunk Beds for Domestic Use - Safety Requirements and Tests - Part 2: Test Methods First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9099
9100-1
9100-2
9100-3
9100-4
9100-5
9100-6
9100-7
9100-8
9100-9
9100-10
9100-11
9100-12
9100-13
9100-14
9101
9102
9103
Air-Conditioning and Ventilation of Dry Provision Rooms on Board Ships - Design Conditions and Basis of Calculations First Edition
Glass containers Vacuum lug finishes Part 1: General First Edition; Replaces ISO 9100: 1992
Glass Containers - Vacuum Lug Finishes - Part 2: 33 medium First Edition
Glass Containers - Vacuum Lug Finishes - Part 3: 38 regular First Edition
Glass Containers - Vacuum Lug Finishes - Part 4: 38 medium First Edition
Glass containers Vacuum lug finishes Part 5: 43 and 48 regular First Edition; Replaces ISO 9100: 1992
Glass containers Vacuum lug finishes Part 6: 53 and 58 regular First Edition; Replaces ISO 9100: 1992
Glass containers Vacuum lug finishes Part 7: 58 deep First Edition; Replaces ISO 9100: 1992
Glass containers Vacuum lug finishes Part 8: 63, 66 and 70 regular First Edition; Replaces ISO 9100; 1992
Glass containers Vacuum lug finishes Part 9: 63, 66 and 70 deep First Edition; Replaces ISO 9100; 1992
Glass containers Vacuum lug finishes Part 10: 77 regular First Edition; Replaces ISO 9100: 1992
Glass containers Vacuum lug finishes Part 11: 82 regular First Edition; Replaces ISO 9100: 1992
Glass containers Vacuum lug finishes Part 12: 89 regular First Edition; Replaces ISO 9100: 1992
Glass containers Vacuum lug finishes Part 13: 100 regular First Edition; Replaces ISO 9100: 1992
Glass containers Vacuum lug finishes Part 14: 110 regular First Edition; Replaces ISO 9100; 1992
Surface Active Agents - Determination of Interfacial Tension - Drop Volume Method First Edition
Diesel Engines - Screw-in Injection Nozzle Holders, Types 24, 25, 26 and 26.1 Second Edition
Road Vehicles - Compression-Ignition Engines - Screw-in Injection Nozzle Holder, Type 23 First Edition
Measurement of Fluid Flow in Closed Conduits - Methods of Evaluating the Performance of Electromagnetic Flow- Meters for Liquids
First Edition (CEN EN 29104: 1993)
Hydraulic Fluid Power - Measurement Techniques - Part 1: General Measurement Principles First Edition
Hydraulic Fluid Power - Measurement Techniques - Part 2: Measurement of Average Steady-State Pressure in a Closed Conduit First
Edition
Truck and Bus Tyres - Method of Measuring Tyre Rolling Circumference - Loaded New Tyres First Edition
Plastics - Polypropylene (PP) and Propylene-Copolymer Thermoplastics - Determination of Isotactic Index First Edition
Crude Petroleum - Determination of Water Content by Hydride Reaction - Field Method First Edition
Green Coffee - Guidelines on Methods of Specification Second Edition
Paints and Varnishes - Determination of Through-Dry State and Through-Dry Time - Method of Test First Edition; (CEN EN
29117:1992)
Cross-Country Skis - Binding Mounting Area - Requirements and Test Methods First Edition;
Petroleum and Related Products - Determination of Air-Release Properties of Steam Turbine and Other Oils - Impinger Method First
Edition; Corrected and Reprinted 05/15/1998
Measurement of Liquid Flow in Open Channels - Stage-Fall-Discharge Relationships First Edition
Fibre-cement slates and fittings First Edition; Corrigendum 1: 1993; Amendment 1: 8/15/2004; Corrigendum 2: 05/2005
Software Engineering - Product Quality - Part 1: Quality Model First Edition; Cancels and Replaces ISO/IEC 9126:1991
ISO
ISO
9104
9110-1
ISO
ISO
ISO
ISO
ISO
9110-2
9112
9113
9114
9116
ISO
ISO
9117
9119
ISO
ISO
ISO
ISO
9120
9123
9125
9126-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9127
9128
9129
9130
9131
9132
9136-1
9136-2
9137
9138
9139
9140
9141
ISO
9141-2
Information Processing Systems - User Documentation and Cover Information for Consumer Software Packages First Edition
Road Vehicles - Graphical Symbols to Designate Brake Fluid Types Second Edition
Motorcycles - Measurement Methods for Moments of Inertia First Edition
Motorcycles Measurement method for location of centre of gravity Second Edition
Three Wheeled Mopeds and Motorcycles - Dimensions - Vocabulary First Edition
Three-Wheeled Mopeds and Motorcycles - Masses - Vocabulary First Edition
Abrasive grains Determination of bulk density Part 1: Macrogrits First Edition; Replaces ISO 9136:1989
Abrasive Grains - Determination of Bulk Density - Part 2: Microgrits First Edition
Abrasive Grains - Determination of Capillarity First Edition
Abrasive Grains - Sampling and Splitting First Edition
Aerospace - Nuts, Plain or Slotted (Castellated) - Procurement Specification First Edition
Aerospace - Nuts, Plain or Slotted (Castellated) - Test Methods First Edition
Road Vehicles - Diagnostic Systems - Requirements for Interchange of Digital Information First Edition
Road Vehicles - Diagnostic Systems - Part 2: CARB Requirements for Interchange of Digital Information First Edition 1994;
Amendment 1: 12-01-1996
ISO
ISO
9141-3
9142
Road Vehicles - Diagnostic Systems - Part 3: Verification of the Communication Between Vehicle and OBD II Scan Tool First Edition
Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
9144
9147
9148
9149
9150
9151
Securities - Optical Character Recognition Line - Position and Structure First Edition
Pig-Irons - Definition and Classification First Edition
Composition Cork in Rolls for Decoration - Test Methods First Edition
Composition Cork in Rolls for Decoration - Specifications First Edition
Protective Clothing - Determination of Behaviour of Materials on Impact of Small Splashes of Molten Metal First Edition
Protective Clothing Against Heat and Flame - Determination of Heat Transmission on Exposure to Flame First Edition
ISO
9152
ISO
9154
ISO
9156
ISO
ISO
ISO
ISO
ISO
ISO
9157
9158
9159
9160
9161
9162
ISO
9163
ISO
ISO
9167-1
9167-2
ISO
9168
ISO
9169
ISO
9170-1
ISO
9170-2
Aerospace - Bolts, with MJ Threads, in Titanium Alloys, Strength Class 1 100 MPa - Procurement Specification First Edition
Aerospace - Bolts, with MJ Threads, Made of Heat-Resistant Nickel-Based Alloy, Strength Class 1 550 MPa - Procurement
Specification First Edition
Aerospace - Nuts, Anchor, Self-Locking, Fixed, 90 Degree Corner, Reduced Series, with Counterbore, with MJ Threads,
Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees
Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition
Aerospace - Nuts, Spline-Drive, Self-Locking, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/425 Degrees C,
1 100 MPa (at Ambient Temperature)/650 Degrees C, 1 210 MPa (at Ambient Temperature)/425 Degrees C, 1 210 MPa (at Ambient
Temperature)/730 Degrees C, 1 550 MPa (at Ambient Temperature)/235 Degrees C, 1 550 MPa (at Ambient Temperature)/425
Degrees Second Edition
Road Vehicles - Nozzle Spouts for Unleaded Gasoline First Edition
Road Vehicles - Nozzle Spouts for Leaded Gasoline and Diesel Fuel First Edition
Information Processing - Data Encipherment - Physical Layer Interoperability Requirements First Edition
Uranium dioxide powder Determination of apparent density and tap density First Edition
Petroleum Products - Fuels (Class F) - Liquefied Petroleum Gases - Specifications First Edition
Textile Glass - Rovings - Manufacture of Test Specimens and Determination of Tensile Strength of Impregnated Rovings Second
edition
Rapeseed - Determination of Glucosinolates Content - Part 1: Method Using High-Performance Liquid Chromatography First Edition
(CEN EN ISO 9167-1: 1995)
Rapeseed - Determination of Glucosinolates Content - Part 2: Method Using X-ray Fluorescence Spectrometry First Edition
Dental Handpieces - Hose Connectors Second Edition; (Incorporating Draft Addendum 1-1989); (CEN EN 29168: 1994) (CAN/CSAZ349.58-94)
Air quality Definition and determination of performance characteristics of an automatic measuring system Second Edition;:1995
[Superseded: ISO 6879]
Terminal Units for Medical Gas Pipeline Systems - Part 1: Terminal Units for Use with Compressed Medical Gases and Vacuum First
Edition
Terminal Units for Use in Medical Gas Pipeline Systems - Part 2: Terminal Units for Anaesthetic Gas Scavenging Systems First
Edition
ISO
9171-1
ISO
ISO
ISO
9171-2
9173-1
9174
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9175-1
9177-1
9177-2
9177-3
9180
9181
9182-1
9182-2
9182-3
9182-4
9182-5
9183-1
9183-2
9184-1
9184-2
9184-3
9184-4
9184-5
9184-6
9184-7
9185
ISO
ISO
ISO
9186-1
9187-1
9187-2
ISO
9188
ISO
9189
Information Technology - 130 mm Optical Disk Cartridge, Write Once, for Information Interchange - Part 1: Unrecorded Optical Disk
Cartridge First Edition; CEN EN 29171-1: 1993
Information Technology - 130 mm Optical Disk Cartridge, Write Once, for Information Interchange - Part 2: Recording Format First
Edition; CEN EN 29171-2: 1993
Dentistry Extraction forceps Part 1: General requirements and test methods Second Edition
Water Quality - Determination of Total Chromium - Atomic Absorption Spectrometric Methods Second Edition
Tubular Tips for Hand- Held Technical Pens Using India Ink on Tracing Paper - Part 1: Definitions, Dimensions, Designation and
Marking First Edition
Mechanical Pencils - Part 1: Classification, Dimensions, Performance Requirements and Testing First Edition
Mechanical Pencils - Part 2: Black Leads - Classification and Dimensions First Edition
Mechanical Pencils - Part 3: Black Leads - Bending Strengths of HB Leads First Edition
Black Leads for Wood-Cased Pencils - Classification and Diameters First Edition
Tools for Pressing - Round Punches with 60 Degree Conical Head and Reduced Shank Second Edition
Tools for Pressing - Guide Pillars - Part 1: Types First Edition
Tools for Pressing - Guide Pillars - Part 2: Type A, Straight Pillars First Edition
Tools for Pressing - Guide Pillars - Part 3: Type B, End-Locking Pillars First Edition
Tools for Pressing - Guide Pillars - Part 4: Type C, Pillars with Taper Lead and Bush First Edition
Tools for Pressing - Guide Pillars - Part 5: Type D, End-Locking Pillars with Flange First Edition
Tools for Pressing - Wear Plates for Press Dies - Part 1: Type A First Edition
Tools for Pressing - Wear Plates for Press Dies - Part 2: Type B First Edition
Paper, Board and Pulps - Fibre Furnish Analysis - Part 1: General Method First Edition
Paper, Board and Pulps - Fibre Furnish Analysis - Part 2: Staining Guide First Edition
Paper, Board and Pulps - Fibre Furnish Analysis - Part 3: Herzberg Staining Test First Edition
Paper, Board and Pulps - Fibre Furnish Analysis - Part 4: GraffC" Staining Test First Edition"
Paper, Board and Pulps - Fibre Furnish Analysis - Part 5: Lofton-Merritt Staining Test (Modification of Wisbar) First Edition
Paper, Board and Pulps - Fibre Furnish Analysis - Part 6: Determination of Fibre Coarseness First Edition
Paper, Board and Pulp - Fibre Furnish Analysis - Part 7: Determination of Weight Factor First Edition
Protective clothing ù Assessment of resistance of materials to molten metal splash Second Edition
Graphical symbols ù Test methods ù Part 1: Methods for testing comprehensibility First Edition [Superseded: ISO 9186, ISO 9186]
Injection equipment for medical use Part 1: Ampoules for injectables Third Edition
Injection Equipment for Medical Use - Part 2: One-Point-Cut (OPC) Ampoules First Edition
Machine Tools - Straight-Sided Single-Action Mechanical Power Presses from 400 kN up to and Including 4 000 kN Nominal Force Characteristics and Dimensions First Edition
Machine Tools - Straight-Sided High-Speed Mechanical Power Presses from 250 kN up to and Including 4 000 kN Nominal Force Characteristics and Dimensions First Edition
ISO
ISO
ISO
ISO
9190
9191
9192
9193
ISO
ISO
ISO
ISO
ISO
9194
9195
9196
9197
9198
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9199
9200
9202
9203-1
9203-2
9203-3
9205
9206
9208
9211-1
9211-2
9211-3
9211-4
9213
ISO
9216
ISO
9217
ISO
9218
Lawn and Garden Ride-on (Riding) Tractors - Drawbar First Edition [Replaced: ASABE S298.1]
Lawn and Garden Ride-on (Riding) Tractors - Three-Point Hitch First Edition
Lawn and Garden Ride-on (Riding) Tractors - One- Point Tubular Sleeve Hitch First Edition
Lawn and Garden Ride-on (Riding) Tractors - Power Take-off First Edition
Bases for Design of Structures - Actions Due to the Self-Weight of Structures, Non- Structural Elements and Stored Materials Density First Edition (PNS 1095:1992)
Liquid Flow Measurement in Open Channels - Sampling and Analysis of Gravel-Bed Material First Edition
Liquid Flow Measurement in Open Channels - Flow Measurements Under Ice Conditions First Edition
Paper, board and pulps Determination of water-soluble chlorides Second Edition
Paper, Board and Pulp - Determination of Water-Soluble Sulfates Second Edition
Aerospace - Nuts, Bihexagonal, Self-Locking, MJ Threads, Classifications 1 100 MPa (at Ambient Temp.)/425 Degrees C, 1 100 MPa
(at Ambient Temp.)/650 Degrees C, 1 210 MPa (at Ambient Temp.)/425 Degrees C, 1 210 MPa (at Ambient Temp.)/730 Degrees C,
1 550 Mpa (at Ambient Temp.)/235 Degrees C, 1 550 MPa (at Ambient Temp.)/425 Degrees C and 1 550 MPa (at Ambient
Temp.)/600 Degrees C, - Dimensions Second Edition
Crude Petroleum and Liquid Petroleum Products - Volumetric Metering of Viscous Hydrocarbons First Edition
Jewelry - Fineness of Precious Metal Alloys First Edition; (CEN EN 29202:1992)
Shipbuilding - Topology of Ship Hull Structure Elements - Part 1: Location of Elements First Edition
Shipbuilding - Topology of Ship Hull Structure Elements - Part 2: Description of Elements First Edition
Shipbuilding - Topology of Ship Hull Structure Elements - Part 3: Relations of Elements First Edition
Refractory Bricks for Use in Rotary Kilns - Hot-Face Identification Marking First Edition
Aerospace - Constant Displacement Hydraulic Motors - General Specifications First Edition
Aluminium Ores - Determination of Vanadium Content - BPHA Spectrophotometric Method First Edition
Optics and Optical Instruments - Optical Coatings - Part 1: Definitions First Edition
Optics and Optical Instruments - Optical Coatings - Part 2: Optical Properties First Edition
Optics and Optical Instruments - Optical Coatings - Part 3: Environmental Durability First Edition
Optics and optical instruments Optical coatings Part 4: Specific test methods Second Edition
Measurement of total discharge in open channels Electromagnetic method using a full-channel-width coil Second Edition
Aerospace - Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and
passivated - Dimensions and masses First Edition
Aerospace - Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and
passivated - Dimensions and masses First Edition
Aerospace - Washers, flat, for pulleys, in alloy steel cadmium plated or in corrosion-resistant steel and passivated - Dimensions and
masses First Edition
ISO
9219
Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in
titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated - Dimensions and masses First Edition
ISO
ISO
ISO
9220
9221-1
9221-2
ISO
9222-1
ISO
ISO
ISO
ISO
9222-2
9223
9224
9225
ISO
ISO
9226
9227
Metallic Coatings - Measurement of Coating Thickness - Scanning Electron Microscope Method First Edition (CEN EN ISO 9220:
1994)
Furniture - Children s High Chairs - Part 1: Safety Requirements First Edition (CEN ENV 1178-1:1994)
Furniture - Children s High Chairs - Part 2: Test Methods First Edition (CEN ENV 1178-2:1994)
Technical Drawings - Seals for Dynamic Application - Part 1: General Simplified Representation First Edition; (Corrected and
Reprinted -1989) (CEN EN ISO 9222-1:1995)
Technical Drawings - Seals for Dynamic Application - Part 2: Detailed Simplified Representation First Edition; (CEN EN ISO 92222:1994)
Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Classification First Edition
Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Guiding Values for the Corrosivity Categories First Edition
Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Measurement of Pollution First Edition
Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Determination of Corrosion Rate of Standard Specimens for the
Evaluation of Corrosivity First Edition
Corrosion Tests in Artificial Atmospheres - Salt Spray Tests Second Edition; Replaces ISO 7253:1996
ISO
9229
Wõrmedõmmung ù Begriffsbestimmungen Thermal insulation ù Vocabulary Isolation thermique ù Vocabulaire Second Edition
ISO
9230
ISO
9232
ISO
ISO
9233
9235
ISO
9236-1
ISO
ISO
9236-3
9237
Information and documentation ù Determination of price indexes for print and electronic media purchased by libraries Second edition
Yogurt - Identification of Characteristic Microorganisms (Lactobacillus Delbrueckii Subsp. Bulgaricus and Streptococcus
Thermophilus) First Edition
Cheese and Cheese Rind - Determination of Natamycin Content - Method by Molecular Absorption Spectrometry and by HighPerformance Liquid Chromatography First Edition
Aromatic Natural Raw Materials - Vocabulary First Edition
Photography Sensitometry of screen/film systems for medical radiography Part 1: Determination of sensitometric curve shape,
speed and average gradient Second Edition
Photography - Sensitometry of Screen/Film Systems for Medical Radiography - Part 3: Determination of Sensitometric Curve Shape,
Speed and Average Gradient for Mammography First Edition
Textiles - Determination of the Permeability of Fabrics to Air First Edition (CEN EN ISO 9237: 1995)
ISO
ISO
9239-1
9239-2
ISO
9241-1
ISO
9241-2
Reaction to Fire Tests for Floorings - Part 1: Determination of the Burning Behaviour Using a Radiant Heat Source Second Edition
Reaction to fire tests for floorings - Part 2: Determination of flame spread at a heat flux level of 25 kW/m2 First Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 1: General Introduction Second Edition;
Amendment 1-03/01/2001
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 2: Guidance on Task Requirements First
Edition
ISO
9241-3
ISO
9241-4
ISO
9241-5
ISO
9241-6
ISO
9241-7
ISO
9241-8
ISO
9241-9
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 3: Visual Display Requirements First Edition;
Amendment 1:12/15/2000
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 4: Keyboard Requirements First Edition;
Technical Corrigendum 1, 11/01/2000 [: ISO 9241-400]
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 5: Workstation Layout and Postural
Requirements First Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 6: Guidance on the Work Enviroment First
Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 7: Requirements for Display with Reflections
First Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 8 Requirements for Displayed Colours First
Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 9: Requirements for Non-Keyboard Input
Device First Edition [: ISO 9241-400]
ISO
9241-11
Ergonomic Requirements For Office Work with Visual Display Terminals (VDTs) - Part 11: Guidance on Usability First Edition
ISO
ISO
ISO
ISO
9241-12
9241-13
9241-14
9241-15
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 12: Presentation of Information First Edition
Ergonomic Requirements For Office Work with Visual Display Terminals (VDTs) - Part 13: User Guidance First Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 14: Menu Dialogues First Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 15: Command Dialogues First Edition
ISO
9241-16
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 16: Direct Manipulation Dialogues First Edition
ISO
ISO
9241-17
9241-110
ISO
ISO
ISO
ISO
ISO
ISO
9241-400
9242
9243
9244
9245
9246
ISO
9247
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 17: Form Filling Dialogues First Edition
Ergonomics of human-system interaction Part 110: Dialogue principles First Edition;:1996 [Replaced: ISO 9241-10]
Ergonomics of human-system interaction ù Part 400: Principles and requirements for physical input devices First Edition [: ISO 92414, ISO 9241-9]
Pliers and Nippers - Construction Worker s Pincers - Dimensions and Test Values First Edition (AS/NZS 4056.10: 1992)
Pliers and Nippers - Carpenter s Pincers - Dimensions and Test Values First Edition
Earth-Moving Machinery - Safety Signs and Hazard Pictorials - General Principles First Edition
Earth-Moving Machinery - Machine Productivity - Vocabulary, Symbols and Units First Edition
Earth-Moving Machinery - Crawler and Wheel Tractor Dozer Blades - Volumetric Ratings First Edition
Earth-Moving Machinery - Electrical Wires and Cables - Principles of Identification and Marking First Edition; Amendment 1:
12/15/1998
ISO
ISO
9248
9249
Earth-Moving Machinery - Units for Dimensions, Performance and Capacities, and Their Measurement Accuracies First Edition
Earth-Moving Machinery - Engine Test Code - Net Power Second Editon; Technical Corrigendum 1: 03-01-1999
ISO
ISO
9251
9252
ISO
9254
ISO
9255
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9256
9258
9259
9261
9264
9265
9266
9267
9268
Thermal Insulation - Heat Transfer Conditions and Properties of Materials - Vocabulary First Edition (CEN EN ISO 9251: 1995)
Synthetic Rubber Latex - Microbiological Examination First Edition
Aerospace - Bolts, Normal Spine Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or
Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition
Aerospace - Bolts, Normal Spline Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated,
Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition
Aerospace - Bolts, Large Hexagonal Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or
Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition
Passenger Cars - Wiper Systems - Wiper Blade Length First Edition
Passenger Cars - Windscreen Wiper Systems - Wiper Arm-to-Blade Connections First Edition; Amendment 1 - 07-15-2001
Agricultural irrigation equipment Emitters and emitting pipe Specification and test methods Second Edition
Woodworking Machines - Narrow Belt Sanding Machines with Sliding Table or Frame - Nomenclature First Edition
Woodworking Machines - Multi-Spindle Boring Machines - Nomenclature First Edition
Woodworking Machines - Universal Tool and Cutter Sharpeners - Nomenclature First Edition
Woodworking Machines - Bandsaw Blade Sharpening Machines - Nomenclature First Edition
Implants for Surgery - Metal Bone Screws with Conical Under-Surface of Head - Dimensions First Edition;
ISO
ISO
ISO
9269
9270
9271
Implants for Surgery - Metal Bone Plates - Holes and Slots Corresponding to Screws with Conical Under-Surface First Edition;
7/24 Tapers for Tool Shanks for Automatic Changing - Tapers for Spindle Noses First Edition
Decontamination of Radioactively Contaminated Surfaces - Testing of Decontamination Agents for Textiles First Edition
ISO
9276-1
ISO
ISO
9276-2
9276-4
ISO
ISO
9276-5
9277
ISO
ISO
ISO
9278
9279
9281-1
Representation of Results of Particle Size Analysis - Part 1: Graphical Representation Second Edition; Corrigendum 1: 2-1-2004
Representation of Results of Particle Size Analysis - Part 2: Calculation of Avarage Particle Sizes/Diameters and Moments from
Particle Size Distributions First Edition
Representation of Results of Particle Size Analysis - Part 4: Characterization of a Classification Process First Edition
Representation of results of particle size analysis - Part 5: Methods of calculation relating to particle size analyses using logarithmic
normal probability distribution First Edition
Determination of the Specific Surface Area of Solids by Gas Adsorption Using the BET Method First Edition
Uranium Dioxide Pellets - Determination of Density and Amount of Open and Closed Porosity - Boiling Water Method and Penetration
Immersion Method First Edition
Uranium Dioxide Pellets - Determination of Density and Total Porosity - Mercury Displacement Method First Edition
Information Technology - Picture Coding Methods - Part 1: Identification First Edition; NZS/ISO/IEC 9281.1: 1990
ISO
9281-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9282-1
9283
9284
9285
9286
9288
9289
ISO
ISO
9292
9293
ISO
ISO
ISO
ISO
ISO
ISO
9295
9296
9297
9298
9300
9301
ISO
9302
ISO
9303
ISO
9304
ISO
9305
ISO
9308-1 CORR 1
ISO
9308-1
ISO
9308-2
ISO
ISO
9308-3
9309
Information Technology - Picture Coding Methods - Part 2: Procedure for Registration First Edition
Information Processing - Coded Representation of Pictures - Part 1: Encoding Principles for Picture Representation in a 7-Bit or 8-Bit
Environment First Edition
Manipulating Industrial Robots - Performance Criteria and Related Test Methods Second Edition
Abrasive Grains - Test- Sieving Machines First Edition
Abrasive Grains and Crude - Chemical Analysis of Fused Aluminium Oxide First Edition
Abrasive Grains and Crude - Chemical Analysis of Silicon Carbide First Edition
Thermal Insulation - Heat Transfer by Radiation - Physical Quantities and Definitions First Edition (CEN EN ISO 9288: 1996)
Oilseed Residues - Determination of Free Residual Hexane First Edition (CEN EN ISO 9289: 1995)
Manganese Ores and Concentrates - Determination of Total Iron Content - 1,10- Phenanthroline Spectrometric Method First Edition
Information Technology - Volume and File Structure of Disk Cartridges for Information Interchange Second Edition
Acoustics - Measurement of High-Frequency Noise Emitted by Computer and Business Equipment First Edition; Corrected and
Reprinted- 1989
Acoustics - Declared Noise Emission Values of Computer and Business Equipment First Edition
Water Quality - Determination of Chloride - Silver Nitrate Titration with Chromate Indicator (Mohr s Method) First Edition
Rubber Compounding Ingredients - Zinc Oxide - Test Methods First Edition
Measurement of gas flow by means of critical flow Venturi nozzles Second Edition
Oil of cumin seed (Cuminum cyminum L.) First Edition
Seamless and Welded (Except Submerged Arc- Welded) Steel Tubes for Pressure Purposes - Electromagnetic Testing for
Verification of Hydraulic Leak-Tightness Second Edition
Seamless and Welded (Except Submerged Arc- Welded) Steel Tubes for Pressure Purposes - Full Peripheral Ultrasonic Testing for
the Detection of Longitudinal Imperfections First Edition
Seamless and Welded (Except Submerged Arc- Welded) Steel Tubes for Pressure Purposes - Eddy Current Testing for the
Detection of Imperfections First Edition
Seamless Steel Tubes for Pressure Purposes - Full Peripheral Ultrasonic Testing for the Detection of Transverse Imperfections First
Edition
Water quality ù Detection and enumeration of Escherichia coli and coliform bacteria ù Part 1: Membrane filtration method
TECHNICAL CORRIGENDUM 1 Second Edition
Water Quality - Detection and Enumeration of Escherichia Coli and Coliform Bacteria - Part 1: Membrane Filtration Method Second
Edition
Water Quality - Detection and Enumeration of Coliform Organisms, Thermotolerant Coliform Organisms and Presumptive
Escherichia Coli - Part 2: Multiple Tube (Most Probable Number) Method First Edition
Water Quality - Detection and Enumeration of Escherichia Coli and Coliform Bacteria in Surface and Waste Water - Part 3:
Miniaturized Method (Most Probable Number) by Inoculation in a Liquid Medium First Edition; Corrigendum 1: 2000
Refrigerant Compressors - Presentation of Performance Data First Edition (NZS/ISO 9309: 1989)
ISO
ISO
9311-1
9311-2
Adhesives for thermoplastic piping systems Part 1: Determination of film properties First Edition
Adhesives for Thermoplastic Piping Systems - Part 2: Determination of Shear Strength First Edition
ISO
ISO
ISO
9311-3
9312
9313
ISO
9314-1
ISO
9314-2
ISO
9314-3
ISO
ISO
ISO
ISO
ISO
9314-4
9314-5
9314-6
9314-7
9314-8
ISO
9314-9
ISO
9314-13
ISO
9314-20
ISO
9314-21
ISO
9314-25
ISO
ISO
ISO
9314-26
9315
9316
ISO
9316-2
Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure First Edition
Resistance Welding Equipment - Insulated Pins for Use in Electrode Back-ups First Edition; (EN ISO 9312 : 1994)
Resistance Spot Welding Equipment - Cooling Tubes First Edition
Information Processing Systems - Fibre Distributed Data Interface (FDDI) - Part 1: Token Ring Physical Layer Protocol (PHY) First
Edition
Information Processing Systems - Fibre Distributed Data Interface (FDDI) - Part 2: Token Ring Media Access Control (MAC) First
Edition
Information Processing Systems - Fibre Distributed Data Interface (FDDI) - Part 3: Physical Layer Medium Dependent (PMD) First
Edition; NZS/ISO/IEC 9314.3: 1990; CEN EN ISO/IEC 9314-3: 1995
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 4: Single-Mode Fiber Physical Layer Medium Dependent
(SMF-PMD) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 5: Hybrid Ring Control (HRC) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 6: Station Management (SMT) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 7: Physical Layer Protocol (PHY-2) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI)- Part 8: Media Access Control-2 (MAC-2) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 9: Low-Cost Fibre Physical Layer Medium Dependent (LCFPMD) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 13: Conformance Test Protocol Implementation Conformance
Statement Proforma (CT-PICS) Proforma First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 20: Abstract Test Suite for FDDI Physical Medium Dependent
Conformance Testing (PMD ATS) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 21: Abstract Test Suite for FDDI Physical Layer Protocol
Conformance Testing (PHY ATS) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 25: Abstract Test Suite for FDDI - Station Management
Conformance Testing (SMT-ATS) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 26: Media Access Control Conformance Testing (MAC-ATS)
First Edition
Information Processing Systems - Interface Between Flexible Disk Cartridge Drives and Their Host Controllers First Edition
Information Technology - Small Computer System Interface-2 Second Edition
Information Technology - Small Computer System Interface-2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI
Interface Module First Edition
ISO
9318-2
Information Technology - Intelligent Peripheral Interface Part 2: Device Specific Command Set for Magnetic Disk Drives First Edition
ISO
9318-3
ISO
9318-4
ISO
9327-1
ISO
9327-2
ISO
9327-3
ISO
9327-4
ISO
ISO
9327-5
9328-1
ISO
9328-2
ISO
9328-3
ISO
9328-4
ISO
9328-5
ISO
ISO
9328-6
9328-7
ISO
9329-1
ISO
9329-3
ISO
9329-4
ISO
9330-1
ISO
9330-2
Information Technology - Intelligent Peripheral Interface Part 3: Device Generic Command Set for Magnetic and Optical Disk Drives
First Edition
Information Technology - Intelligent Peripheral Interface Part 4: Device Generic Command Set for Magnetic Tape Drives (IPI-3 Tape)
Second Edition
Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 1: General Requirements
First Edition; Replaces ISO 2604-1: 1975
Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 2: Non-Alloy and Alloy (Mo,
Cr and CrMo) Steels with Specified Elevated Temperature Properties First Edition
Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 3: Nickel Steels with
Specified Low Temperature Properties First Edition
Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 4: Weldable Fine Grain
Steels with High Proof Strength First Edition
Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 5: Stainless Steels First
Edition
Steel Flat Products for Pressure Purposes - Technical Delivery Conditions - Part 1: General Requirements Second Edition
Steel flat products for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steels with specified elevated
temperature properties Second Edition
Steel flat products for pressure purposes Technical delivery conditions Part 3: Weldable fine grain steels, normalized Second
Edition; Together with ISO 9328-6, cancels and replaces ISO 9328-4:1991
Steel flat products for pressure purposes Technical delivery conditions Part 4: Nickel-alloy steels with specified low temperature
properties Second Edition
Steel flat products for pressure purposes Technical delivery conditions Part 5: Weldable fine grain steels, thermomechanically rolled
Second Edition
Steel flat products for pressure purposes Technical delivery conditions Part 6: Weldable fine grain steels, quenched and tempered
First Edition
Steel flat products for pressure purposes Technical delivery conditions Part 7: Stainless steels First Edition
Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 1: Unalloyed Steels with Specified Room
Temperature Properties First Edition; Supersedes 2604-2
Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 3: Unalloyed and Alloyed Steels with Specified
Low Temperature Properties First Edition; Replaces 2604-2 Along with 9329-2,1 and 4
Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 4: Austenitic Stainless Steels First Edition;
Replaces 2604-2 Along with 9329-2,3 and 1
Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 1: Unalloyed Steel Tubes with Specified Room
Temperature Properties First Edition; (Corrected and Reprinted -1990)
Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 2: Electric Resistance and Induction Welded
Unalloyed and Alloyed Steel Tubes with Specified Elevated Temperature Properties First Edition
ISO
9330-3
ISO
9330-4
ISO
9330-5
ISO
ISO
9330-6
9333
ISO
9334
ISO
9335
ISO
ISO
ISO
9336-1
9336-2
9336-3
ISO
9342-1
ISO
ISO
ISO
9342-2
9343
9344
ISO
9345-1
ISO
9345-2
ISO
ISO
ISO
ISO
9346
9349
9352
9354
ISO
ISO
9355-1
9355-2
Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 3: Electric Resistance and Induction Welded
Unalloyed and Alloyed Steel Tubes with Specified Low Temperature Properties First Edition
Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 4: Submerged Arc-Welded Unalloyed and Alloyed
Steel Tubes with Specified Elevated Temperature Properties First Edition
Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 5: Submerged Arc-Welded Unalloyed and Alloyed
Steel Tubes with Specified Low Temperature Properties First Edition
Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 6: Longitudinally Welded Austenitic Stainless Steel
Tubes First Edition
Dentistry Brazing materials Second Edition
Optics and photonics ù Optical transfer function ù Definitions and mathematical relationships Optique et photonique ù Fonction de
transfert optique ù DÚfinitions et relations mathÚmatiques Second Edition; Trilingual
Optics and optical instruments - Optical transfer function - Principles and procedures of measurement First Edition; Corrigendum:
11/15/2005
Optics and Optical Instruments - Optical Transfer Function - Application Part 1: Interchangeable Lenses for 35mm Still Cameras First
Edition
Optics and Optical Instruments - Optical Transfer Function - Application Part 2: Lenses for Office Copiers First Edition
Optics and Optical Instruments - Optical Transfer Function - Application Part 3: Telescopes First Edition
Optics and optical instruments Test lenses for calibration of focimeters Part 1: Test lenses for focimeters used for measuring
spectacle lenses First Edition; Replaces ISO 9342:1996
Optics and optical instruments Test lenses for calibration of focimeters Part 2: Test lenses for focimeters used for measuring contact
lenses First Edition
Pliers and nippers Slip joint pliers Dimensions and test values Second Edition
Optics and Optical Instruments - Microscopes - Graticules for Eyepieces First Edition
Optics and Optical Instruments - Microscopes - Imaging Distances Related to Mechanical Reference Planes - Part 1: Tube Length
160 mm First Edition
Optics and Optical Instruments - Microscopes: Imaging Distances Related to Mechanical Reference Planes - Part 2: InfinityCorrected Optical Systems First Edition
Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary Performance
hygrothermique des bÔtiments et des matÚriaux pour le bÔtiment - Grandeurs physiques pour le transfert de masse - Vocabulaire
Second Edition
Preinsulated ductile iron pipeline systems Second Edition
Plastics - Determination of Resistance to Wear by Abrasive Wheels Second Edition
Textiles - Weaves - Coding System and Examples First Edition; Technical Corrigendum 1:10-15-2000
Ergonomic Requirements for the Design of Displays and Control Actuators - Part 1: Human Interactions with Displays and Control
Actuators First Edition
Ergonomic Requirements for the Design of Displays and Control Actuators - Part 2: Displays First Edition
ISO
ISO
ISO
9355-3
9356
9357
ISO
ISO
9358
9359
ISO
9360-1
ISO
9360-2
ISO
9361-1
ISO
ISO
ISO
9361-2
9362
9364
ISO
9366
ISO
9367-1
ISO
9367-2
ISO
9368-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9370
9373
9374-1
9374-3
9374-4
9374-5
9375
9376
ISO
ISO
9377-2
9378
Ergonomic requirements for the design of displays and control actuators Part 3: Control actuators First Edition
Polyolefin Pipe Assemblies with or Without Jointed Fittings - Resistance to Internal Pressure - Test Method First Edition
Equipment for Crop Protection - Agricultural Sprayers - Tank Nominal Volume and Filling Hole Diameter First Edition
Optics and Optical Instruments - Veiling Glare of Image-Forming Systems - Definitions and Methods of Measurement First Edition
Air Quality - Stratified Sampling Method for Assessment of Ambient Air Quality First Edition
Anaesthetic and Respiratory Equipment - Heat and Moisture Exchangers (HMEs) for Humidifying Respired Gases in Humans - Part
1: HMEs for Use with Minimum Tidal Volumes of 250 ml First Edition
Anaesthetic and Respiratory Equipment - Heat and Moisture Exchangers (HMEs) for Humidifying Respired Gases in Humans Part 2:
HMEs for Use with Tracheostomized Patients Having Minimum Tidal Volumes of 250 ml First Edition
Indexable Inserts for Cutting Tools - Ceramic Inserts with Rounded Corners - Part 1: Dimensions of Inserts Without Fixing Hole First
Edition
Indexable Inserts for Cutting Tools - Ceramic Inserts with Rounded Corners - Part 2: Dimensions of Inserts with Cylindrical Fixing
Hole First Edition
Banking - Banking Telecommunication Messages - Bank Identifier Codes Second Edition
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities Third Edition
Agglomerated Cork Floor Tiles - Determination of Dimensions and Deviation from Squareness and from Straightness of Edges
Second Edition
Lashing and Securing Arrangements on Road Vehicles for Sea Transportation on Ro/Ro Ships - General Requirements - Part 1:
Commercial Vehicles and Combinations of Vehicles, Semi-Trailers Excluded First Edition (CEN EN 29367-1: 1993)
Lashing and Securing Arrangements on Road Vehicles for Sea Transportation on Ro/Ro Ships - General Requirements - Part 2:
Semi-Trailers First Edition (CEN EN 29367-2:1994)
Measurement of Liquid Flow in Closed Conduits by the Weighing Method - Procedures for Checking Installations - Part 1: Static
Weighing Systems First Edition
Plastics - Instrumental Determination of Radiant Exposure in Weathering Tests - General Guidance and Basic Test Method First
Edition
Cranes and Related Equipment - Accuracy Requirements for Measuring Parameters During Testing First Edition
Cranes - Information to Be Provided - Part 1: General First Edition
Cranes - Information to be Provided for Enquiries, Orders, Offers and Supply Part 3: Tower Cranes First Edition
Cranes - Information to Be Provided - Part 4: Jib Cranes First Edition
Cranes - Information to Be Provided - Part 5: Overhead Travelling Cranes and Portal Bridge Cranes First Edition
Woodworking Machines - Disc Sanding Machines with Spindle in Fixed Position - Nomenclature First Edition
Early Potatoes - Guide to Cooling and Refrigerated Transport First Edition
Water Quality - Determination of Hydrocarbon Oil Index - Part 2: Method Using Solvent Extraction and Gas Chromatography First
Edition
Photography - Vesicular Microfilm - Determination of ISO Speed and ISO Range First Edition
ISO
ISO
ISO
ISO
9379
9380
9381
9382
ISO
ISO
ISO
9383
9384
9385
ISO
9386-1
ISO
9386-2
ISO
ISO
9388
9390
ISO
ISO
ISO
9391
9392
9393-1
ISO
9393-2
ISO
9394
ISO
9396
ISO
9398-1
ISO
9398-2
ISO
9398-3
ISO
ISO
9398-4
9400
ISO
9402
Operating forces Test method Doors Second Edition
Doorsets - Repeated Torsion Test First Edition
Hinged or pivoted doors Determination of the resistance to static torsion Second Edition
Shipborne Barges, All Series - Classification and Main Requirements First Edition
Products in fibre-reinforced cement Short corrugated or asymmetrical section sheets and fittings for roofing First Edition; Amendment
1: 09/15/2004; Technical Corrigendum 1: 5/15/2005
Fibre-cement siding shingles First Edition; Amendment 1: 9/1/2004; Corrigendum 1: 05/2005
Glass and Glass-Ceramics - Knoop Hardness Test First Edition
Power-Operated Lifting Platforms for Persons with Impaired Mobility - Rules for Safety, Dimensions and Functional Operation - Part
1: Vertical Lifting Platforms First Edition
Power-Operated Lifting Platforms for Persons with Impaired Mobility - Rules for Safety, Dimensions and Functional Operation - Part
2: Powered Stairlifts for Seated, Standing and Wheelchair Users Moving in an Inclined Plane First Edition
Nickel Alloys - Determination of Phosphorus Content - Molybdenum Blue Molecular Absorption Spectrometric Method First Edition
Water Quality - Determination of Borate - Spectrometric Method Using Azomethine-H First Edition
Water Quality - Sampling in Deep Waters for Macro-Invertebrates - Guidance on the Use of Colonization, Qualitative and Quantitative
Samplers First Edition; (CEN EN ISO 9391:1995)
Agglomerated Cork Discs - Sealing Behaviour First Edition
Thermoplastics valves for industrial applications Pressure test methods and requirements Part 1: General Second Edition
Thermoplastics Valves - Pressure Test Methods and Thermoplastics valves for industrial applications - Pressure test methods and
requirements - Part 2: Test conditions and basic requirements Second Edition
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Determination of Biocompatibilty by Ocular Study with Rabbit
Eyes Second Edition
Plastics - Phenolic Resins - Determination of the Gel Time of Resols Under Specific Conditions Using Automatic Apparatus Second
Edition
Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 1:
Flatwork Ironing Machines Second Edition
Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 2: Batch
Drying Tumblers Second Edition
Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 3:
Washing Tunnels Second Edition
Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 4:
Washers-Extractors Second Edition
Nickel-Based Alloys - Determination of Resistance to Intergranular Corrosion First Edition; CEN EN ISO 9400: 1995
Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for Pressure Purposes - Full Peripheral Magnetic
Transducer/Flux Leakage Testing of Ferromagnetic Steel Tubes for the Detection of Longitudinal Imperfections First Edition
ISO
9403
ISO
ISO
9404-1
9405
ISO
ISO
9406
9407
ISO
ISO
ISO
9408
9409-1
9409-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9413
9414
9415
9416
9418
9424
9426
9427
9431
9437
ISO
9438
ISO
ISO
ISO
9439
9441
9442
ISO
9443
ISO
9444
ISO
ISO
ISO
9445
9448-9
9448-10
Crude Petroleum - Transfer Accountability - Guidelines for Cargo Inspection First Edition
Enclosures for Protection Against Ionizing Radiation - Lead Shielding Units for 150 mm, 200 mm and 250 mm Thick Walls - Part 1:
Chevron Units of 150 mm and 200 mm Thickness First Edition
Textile Floor Coverings - Assessment of Changes in Appearance First Edition
Carbonaceous Materials for the Production of Aluminium - Green Coke - Determination of Volatile Matter Content by Gravimetric
Analysis Second Edition
Shoes Sizes - Mondopoint System of Sizing and Marking First Edition;
Water Quality - Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium by Determination of
Oxygen Demand in a Closed Respirometer Second Edition
Manipulating industrial robots Mechanical interfaces Part 1: Plates Third Edition
Manipulating industrial robots Mechanical interfaces Part 2: Shafts Second Edition
Tyre Valves - Dimensions and Designation Valves Pour Pneumatiques - Dimensions Et Designation First Edition; Amendment 1:
10/01/2001; Amendment 2: 10/15/2004
Woodworking Machines - Curtain Coating Machines - Nomenclature First Edition
Woodworking Machines - Wide Belt Sanding Machines - Nomenclature First Edition
Paper - Determination of Light Scattering and Absorption Coefficients (Using Kubelka-Munk Theory) First Edition
Aerospace - Rivets, Solid, in Aluminium or Aluminium Alloys - Procurement Specification First Edition
Wood-based panels Determination of dimensions of test pieces Second Edition
Wood-based panels Determination of dimensions of panels First Edition; Replaces ISO 9426-1
Wood-Based Panels - Determination of Density Second Edition
Construction Drawings - Spaces for Drawing and for Text, and Title Blocks on Drawing Sheets First Edition
Shipbuilding - Inland Vessels - Matrosov Anchors First Edition
Metallurgical-Grade Fluorspar - Determination of Total Phosphorus Content - Reduced-Molybdophosphate Spectrometric Method
Second Edition
Water Quality - Evaluation of Ultimate Biodegradability of Organic Compounds in Aqueous Medium - Carbon Dioxide Evolution Test
Second Edition
Steel - Determination of Niobium Content - PAR Spectrophotometric Method First Edition (AS/NZS 1050.31: 1994)
Steel - Hot-Rolled Ribbed and Grooved Flats for Spring Leaves - Tolerances and Dimensions First Edition
Heat-Treatable and Alloy Steels - Surface Quality Classes for Hot-Rolled Round Bars and Wire Rods - Technical Delivery Conditions
First Edition
Continuously Hot-Rolled Stainless Steel Strip, Plate/Sheet and Cut Lengths - Tolerances on Dimensions and Form Second Edition
Continuously Cold-Rolled Stainless Stell Narrow Strip, Wide Strip, Plate/Sheet and Cut Lengths - Tolerances on Dimensions and
Form Second Edition
Tools for Pressing - Guide Bushes - Part 9: Form B, Ball Cage Bushes, Plain, Type 2 First Edition
Tools for Pressing - Guide Bushes - Part 10: Form E, Gliding Bushes, Flanged, Type 2 First Edition
ISO
ISO
ISO
ISO
ISO
9448-11
9449
9451
9452
9453
ISO
ISO
9454-1
9454-2
ISO
9455-1
ISO
9455-2
ISO
ISO
9455-3
9455-5
Tools for Pressing - Guide Bushes - Part 11: Form F, Ball Cage Bushes, Flanged, Type 2 First Edition
Tools for moulding ù Centring sleeves Second Edition
Woodworking Machines - Hand-Loading Veneering Presses for Flat Surfaces - Nomenclature First Edition
Woodworking Machines - Crosswise Veneer Splicing Machines - Nomenclature First Edition
Soft Solder Alloys - Chemical Compositions and Forms Second Edition
Soft Soldering Fluxes - Classification and Requirements - Part 1: Classification, Labelling and Packaging First Edition (CEN EN
29454-1: 1993)
Soft Soldering Fluxes - Classification and Requirements - Part 2: Performance Requirements First Edition
Soft Soldering Fluxes - Test Methods - Part 1: Determination of Non- Volatile Matter, Gravimetric Method First Edition (CEN EN
29455-1: 1993)
Soft Soldering Fluxes - Test Methods - Part 2: Determination of Non-Volatile Matter, Ebulliometric Method First Edition (CEN EN ISO
9455-2: 1995)
Soft Soldering Fluxes - Test Methods - Part 3: Determination of Acid Value, Potentiometric and Visual Titration Methods First Edition;
(CEN EN ISO 9455-3: 1994)
Soft Soldering Fluxes - Test Methods - Part 5: Copper Mirror Test First Edition (CEN EN 29455-5: 1993)
ISO
ISO
ISO
ISO
ISO
9455-6
9455-8
9455-9
9455-10
9455-11
Soft Soldering Fluxes - Test Methods - Part 6: Determination and Detection of Halide (Excluding Fluoride) Content First Edition
Soft Soldering Fluxes - Test Methods - Part 8: Determination of Zinc Content First Edition (CEN EN 29455-8: 1993)
Soft Soldering Fluxes - Test Methods - Part 9: Determination of Ammonia Content First Edition (CEN EN ISO 9455-9: 1995)
Soft Soldering Fluxes - Test Methods - Part 10: Flux Efficancy Tests, Solder Spread Method First Edition
Soft Soldering Fluxes - Test Methods - Part 11: Solubility of Flux Residues First Edition (CEN EN 29455-11: 1993)
ISO
ISO
9455-12
9455-13
Soft Soldering Fluxes - Test Methods - Part 12: Steel Tube Corrosion Test First Edition (CENELEC EN ISO 9455 -12 - 1994)
Soft Soldering Fluxes - Test Methods - Part 13: Determination of Flux Spattering First Edition
ISO
ISO
ISO
9455-14
9455-15
9455-16
ISO
ISO
ISO
ISO
9455-17
9457-1
9457-2
9458
ISO
9459-1
Soft Soldering Fluxes - Test Methods - Part 14: Assessment of Tackiness of Flux Residues First Edition (CEN EN 29455-14: 1993)
Soft Soldering Fluxes - Test Methods - Part 15: Copper Corrosion Test First Edition
Soft Soldering Fluxes - Test Methods - Part 16: Flux Efficacy Tests, Wetting Balance Method First Edition
Soft soldering fluxes Test methods Part 17: Surface insulation resistance comb test and electrochemical migration test of flux
residues First Edition
Road Vehicles - Metric Starter Motor Pinions - Part 1: Currently Used Pinions First Edition
Road Vehicles - Metric Starter Motor Pinions - Part 2: Pinions with 20 Degrees Pressure Angle First Edition
Passenger Cars - Starter Motor Electrical Connections First Edition
Solar Heating - Domestic Water Heating Systems - Part 1: Performance Rating Procedure Using Indoor Test Methods First Edition
AS/NZS 4445.1:1993
ISO
9459-2
ISO
ISO
ISO
9459-5
9461
9462
ISO
ISO
ISO
ISO
9463
9465
9467
9469
ISO
9473-1
ISO
ISO
ISO
9473-2
9475
9477
ISO
9486
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9487
9488
9496
9497
9498
9499
9501
ISO
ISO
9502
9503
ISO
9504
ISO
ISO
ISO
9505
9506-1
9506-2
Solar Heating - Domestic Water Heating Systems - Part 2: Outdoor Test Methods for System Performance Characterization and
Yearly Performance Prediction of Solar-Only Systems First Edition
Solar heating ù Domestic water heating systems ù Part 5: System performance characterization by means of whole-system tests and
computer simulation First Edition
Hydraulic Fluid Power - Identification of Valve Ports, Subplates, Control Devices and Solenoids First Edition
Alpine ski-bindings Requirements and test methods Third Edition
Nitric Acid Feed Solutions from Reprocessing Plants - Spectrophotometric Determination of Plutonium After Oxidation to Plutonium
(VI) First Edition
Alpine Ski-Bindings - Lateral Release Under Impact Loading - Test Method First Edition
Forestry Machinery - Portable Chain-Saws and Brush-Cutters - Exhaust System-Caused Fire Risk First Edition
Air Cargo Equipment - Unit Load Devices for Transportation of Horses First Edition
Textile machinery and accessories Strip steel for dents of reeds Part 1: Cold rolled strip steel First Edition; Together with ISO 94732:2006 Cancels and Replaces ISO 9473:1988
Textile machinery and accessories Strip steel for dents of reeds Part 2: Hardened strip steel First Edition; Together with ISO 94731:2006 Cancels and Replaces ISO 9473:1988
Aircraft Inner Tube and Tubeless Tyre Valves - Cores and Caps - Test Methods First Edition
High Strength Cast Steels for General Engineering and Structural Purposes First Edition
Workplace Air - Determination of Vaporous Chlorinated Hydrocarbons - Charcoal Tube/Solvent Desorption/ Gas Chromatographic
Method First Edition
Workplace Air - Determination of Vaporous Aromatic Hydrocarbons - Charcoal Tube/Solvent Desorption/ Gas Chromatographic
Method First Edition
Solar Energy - Vocabulary Energie Solaire - Vocabulaire First Edition
CHILL The ITU-T programming language Fourth Edition
Fluorspar - Experimental Methods for Evaluation of Quality Variation First Edition
Fluorspar - Experimental Methods for Checking the Bias of Sampling and Sample Preparation First Edition
Fluorspar - Method of Determining the Precision of Sampling and Sample Preparation First Edition
Metallurgical-Grade Fluorspar - Determination of Total Sulfur Content - Iodometric Method After Combustion First Edition
Metallurgical-Grade Fluorspar - Determination of Silica Content - Reduced-Molybdosilicate Spectrometric Method Second Edition
Metallurgical-Grade Fluorspar - Determination of Available Fluorine Content - Modified Willard-Winter Method First Edition
Metallurgical-Grade Fluorspar - Determination of Antimony Content - Solvent Extraction Atomic Absorption Spectrometric Method
Second Edition
All Grades of Fluorspar - Determination of Arsenic Content - Silver Diethyldithiocarbamate Spectrometric Method First Edition
Industrial Automation Systems - Manufacturing Message Specification - Part 1: Service Definition Second Edition
Industrial Automation Systems - Manufacturing Message Specification - Part 2: Protocol Specification Second Edition
ISO
9506-5
ISO
ISO
ISO
ISO
9506-6
9507
9509
9512
ISO
9513
ISO
9514
ISO
9516
ISO
ISO
ISO
ISO
ISO
ISO
9516-1
9517
9518
9519
9523
9524
ISO
9525
ISO
9526
ISO
9528
ISO
9529-1
ISO
ISO
ISO
ISO
9529-2
9533
9534
9535
Industrial automation systems - Manufacturing message specification - Part 5: Companion Standard for Programmable Controllers
Syst×mes d automatisation industrielle - SpÚcification de messagerie industrielle - Partie 5: Norme d accompagnement pour les
Automates Programmables First Edition
Industrial automation systems - Manufacturing message specification - Part 6: Companion Standard for Process Control Systeme
d'automatisation industrille - Specification de messagerie industrielle - Partie 6: Norme d'accompagnement pour la conduite de
procede First Edition
Iron Ores - Determination of Total Iron Content - Titanium(III) Chloride Reduction Methods First Edition
Water quality Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms Second Edition
Cigarettes - Determination of Ventilation - Definitions and Measurement Principles Second Edition
Metallic Materials - Calibration of Extensometers Used in Uniaxial Testing Second Edition; Corrected and Reprinted 02/01/2001
Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and
guidelines for testing Second Edition
Iron Ores - Determination of Silicon, Calcium, Manganese, Aluminium, Titanium, Magnesium, Phosphorus, Sulfur and Potassium Wavelength Dispersive X-Ray Fluorescence Spectrometric Method First Edition
Iron Ores - Determination of Various Elements by X-ray Fluorescence Spectrometry - Part 1: Comprehensive Procedure First Edition
Iron ores ù Determination of water-soluble chloride ù Ion-selective electrode method Second Edition
Forestry Machinery - Portable Chain-Saws - Kickback Test Second Edition
Shipbuilding and Marine Structures - Rungs for Dog-Step Ladders First Edition (CEN EN 29519: 1994)
Touring Ski-Boots for Adults - Interface with Ski-Binding First Edition
Machine Tools - Front Faces of Spindle Holders for Machining Centres - Functional Dimensions First Edition
Cinematography - Recording Head Gaps for Two Sound Records on 17,5 mm Magnetic Film - Positions and Width Dimensions First
Edition
Fruits, Vegetables and Derived Products - Determination of Iron Content by Flame Atomic Absorption Spectrometry First Edition
Aerospace - Standard-Weight Polytetrafluoroethylene (PTFE) Hose Assemblies, Classification 204 Degrees Celsius/21 000 kPa Procurement Specification Second Edition
Information Processing Systems - Data Interchange on 90 mm (3,5 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 15 916 ftprad, on 80 Tracks on Each Side - Part 1: Dimensional, Physical and Magnetic Characteristics First Edition
Information Processing Systems - Data Interchange on 90 mm (3,5 in) Flexible Disk Cartridges Using Modified Frequency Modulation
Recording at 15 916 ftprad, on 80 Tracks on Each Side - Part 2: Track Format First Edition
Earth-Moving Machinery - Machine-Mounted Forward and Reverse Audible Warning Alarm - Sound Test Method First Edition
Road Vehicles - Fuel Pump Electric Connections First Edition
Woodworking Machines - Machines for Production of Core Stock from Laths - Nomenclature First Edition
ISO
ISO
ISO
ISO
9536
9537
9538
9539
ISO
9541-1
ISO
9541-2
ISO
9541-3
ISO
9542
ISO
ISO
9543
9545
ISO
9548-1
ISO
ISO
ISO
ISO
9548-2
9549
9553
9554
ISO
9555-1
ISO
9555-2
ISO
9555-3
ISO
9555-4
ISO
ISO
ISO
9556
9558
9559
Woodworking Machines - Mortising Machines with Oscillating Tool Action - Nomenclature First Edition
Woodworking Machines - Single-End Edge Bonding Machines - Nomenclature First Edition
Aerospace - Hydraulic Tubing Joints and Fittings - Planar Flexure Test First Edition
Materials for Equipment Used in Gas Welding, Cutting and Allied Processes First Edition
Information Technology - Font Information Interchange - Part 1: Architecture First Edition; Technical Corrigendum 1: 10/01/1992;
Technical Corrigendum 2: 07/15/1994; Technical Corrigendum 3: 07/01/1995; Amendment 1: 1/15/2001; Amendment 2: 12/15/1998;
Amendment 3: 12/15/2000
Information Technology - Font Information Interchange - Part 2: Interchange Format First Edition; Corrigendum 1: 1993; Corrigendum
2: 1995; Amendment 1: 12/15/2000
Information technology - Font information interchange - Part 3: Glyph shape representation First Edition; Amendment 1: 10/01/2005
Information Processing Systems - Telecommunications and Information Exchange between Systems - End System to Intermediate
System Routeing Exchange Protocol for Use in Conjunction with the Protocol for Providing the Connectionless-Mode Network
Service (ISO 8473) Amendment 1: 09/15/1999
Information Processing Systems - Information Exchange Between Systems - Synchronous Transmission Signal Quality at DTE/DCE
Interfaces First Edition
Information Technology - Open Systems Interconnection - Application Layer Structure Second Edition
Information Technology - Open Systems Interconnection - Connectionless Session Protocol: Protocol Specification First Edition;
Amendment 1: 12/15/2000
Information Technology - Open Systems Interconnection - Connectionless Session Protocol: Protocol Implementation Conformance
Statement (PICS) Proforma First Edition
Information Technology - Galvanic Isolation of Balanced Interchange Circuits First Edition; AS/NZS 4162: 1994
Solar Energy - Methods of Testing Preformed Rubber Seals and Sealing Compounds Used in Collectors First Edition
Fibre ropes General specifications Second Edition
Measurement of Liquid Flow in Open Channels - Tracer Dilution Methods for the Measurement of Steady Flow - Part 1: General First
Edition
Measurement of Liquid Flow in Open Channels - Tracer Dilution Methods for the Measurement of Steady Flow - Part 2: Radioactive
Tracers First Edition
Measurement of Liquid Flow in Open Channels - Tracer Dilution Methods for the Measurement of Steady Flow - Part 3: Chemical
Tracers First Edition
Measurement of Liquid Flow in Open Channels - Tracer Dilution Methods for the Measurement of Steady Flow - Part 4: Fluorescent
Tracers First Edition
Steel and Iron - Determination of Total Carbon Content - Infrared Absorption Method After Combustion in an Induction Furnace First
Edition; (Corrected and Reprinted -1989)
Woodworking Machines - Veneer Slicing Machines - Nomenclature First Edition
Photography - 35 mm Filmstrip Projectors - Specifications for Frame Masks First Edition
ISO
ISO
9562
9563
ISO
9564-1
ISO
9564-2
ISO
ISO
ISO
9564-3
9565
9566
ISO
ISO
9567
9568
ISO
9574
ISO
9576-1
ISO
ISO
ISO
ISO
ISO
9576-2
9579
9583
9584
9585
ISO
9587
ISO
ISO
ISO
9588
9589
9591
ISO
9592-1
ISO
9592-2
ISO
9592-3
Water Quality - Determination of Adsorbable Organically Bound Halogens (AOX) Third Edition
Belt Drives - Electrical Conductivity of Antistatic Endless Synchronous Belts - Characteristics and Test Method First Edition
Banking - Personal Identification Number (PIN) Management and Security - Part 1: Basic Principles and Requirements for Online PIN
Handling in ATM and POS Systems Second Edition
Banking - Personal Identification Number Management and Security - Part 2: Approved Algorithm(s) for PIN Encipherment Second
Edition
Banking Personal Identification Number management and security Part 3: Requirements for offline PIN handling in ATM and POS
systems First Edition
Two-Wheeled Motorcycles - Parking Stability of Side- and Centre-Stands First Edition
Woodworking Machines - Single-End Tenoning Machines with Several Spindles - Nomenclature First Edition
Woodworking Machines - Horizontal Shredding Machines for Wood Wool Production, Quadruple Effect - Nomenclature First Edition
Cinematography - Background Acoustic Noise Levels in Theatres, Review Rooms and Dubbing Rooms First Edition
Information Technology - Provision of the OSI Connection-Mode Network Service by Packet Mode Terminal Equipment to an
Integrated Services Digital Network (ISDN) Second Edition; AS/NZS 4099: 1994
Information Technology - Open Systems Interconnection - Connectionless Presentation Protocol: Protocol Specification Second
Edition; Amendment 1: 12/15/2000
Information Technology - Open Systems Interconnection - Connectionless Presentation Protocol: Protocol Implementation
Conformance Statement (PICS) Proforma First Edition
Information Technology - Remote Database Access for SQL with Security Enhancement Second Edition
Implants for Surgery - Non-Destructive Testing - Liquid Penetrant Inspection of Metallic Surgical Implants First Edition
Implants for Surgery - Non-Destructive Testing - Radiographic Examination of Cast Metallic Surgical Implants First Edition
Implants for Surgery - Determination of Bending Strength and Stiffness of Bone Plates First Edition
Metallic and Other Inorganic Coatings - Pretreatment of Iron or Steel to Reduce the Risk of Hydrogen Embrittlement First Edition
Metallic and Other Inorganic Coatings - Post-Coating Treatments of Iron or Steel to Reduce the Risk of Hydrogen Embrittlement First
Edition
Escalators - Building Dimensions First Edition
Corrosion of aluminium alloys Determination of resistance to stress corrosion cracking Second Edition
Information Technology - Computer Graphics and Image Processing - Programmer s Hierarchical Interactive Graphics System
(PHIGS) - Part 1: Functional Description Second Edition
Information Technology - Computer Graphics and Image Processing - Programmer s Hierarchical Interactive Graphics System
(PHIGS) - Part 2: Archive File Format Second Edition
Information Technology - Computer Graphics and Image Processing - Programmer s Hierarchical Interactive Graphics System
(PHIGS) - Part 3: Specification for Clear-Text Encoding of Archive File Second Edition
ISO
9593-1
ISO
9593-3
ISO
9593-4
ISO
ISO
ISO
ISO
ISO
9594-1
9594-2
9594-3
9594-4
9594-5
ISO
ISO
ISO
9594-6 CORR 2
9594-6
9594-7
ISO
ISO
9594-8
9594-9
ISO
ISO
9594-10
9595
ISO
9596-1
ISO
ISO
9596-2
9597
ISO
9598
ISO
ISO
ISO
9599
9606-1
9606-2
Information Processing Systems - Computer Graphics - Programmer s Hierarchical Interactive Graphics System (PHIGS) Language
Bindings - Part 1: FORTRAN First Edition; Corrigendum 1-1993; Corrigendum 2-1994; Amendment 1- 1995; NZS/ISO/IEC 9593.1:
1990
Information Technology - Computer Graphics - Programmer s Hierarchical Interactive Graphics System (PHIGS) Language Bindings
- Part 3: Ada First Edition; Amendment 1-1994; Corrigendum 1-1993; Corrigendum 2-1994
Information Technology - Computer Graphics - Programmer s Hierarchical Interactive Graphics System (PHIGS) Language Bindings
- Part 4: C First Edition; Amendment 1: 05-01-1994; Technical Corrigendum 1: 08-01-1994; Amendment 2: Incorporation of PHIGS
Amendments: 12-15-1998
Information technology Open Systems Interconnection The Directory: Overview of concepts, models and services Fifth Edition
Information technology Open Systems Interconnection The Directory: Models Fifth Edition
Information technology Open Systems Interconnection The Directory: Abstract service definition Fifth Edition
Information technology Open Systems Interconnection The Directory: Procedures for distributed operation Fifth Edition
Information technology Open Systems Interconnection The Directory: Protocol specifications Fifth Edition
Information technology ù Open Systems Interconnection ù The Directory: Selected attribute types TECHNICAL CORRIGENDUM 2
Fifth Edition
Information technology Open Systems Interconnection The Directory: Selected attribute types Fifth Edition
Information technology Open Systems Interconnection The Directory: Selected object classes Fifth Edition
Information technology Open Systems Interconnection The Directory: Publickey and attribute certificate frameworks Fifth Edition
Information technology Open Systems Interconnection The Directory: Replication Fourth Edition
Information Technology - Open Systems Interconnection - The Directory: Use of Systems Management for Administration of the
Directory Third Edition
Information Technology - Open Systems Interconnection - Common Management Information Service Third Edition
Information Technology - Open Systems Interconnection - Common Management Information Protocol - Part 1: Specification Third
Edition; Technical Corrigendum 1: 12/15/1999; Corrigendum 2: 12/01/2002
Information Technology - Open Systems Interconnection - Common Management Information Protocol: Protocol Implementation
Conformance Statement (PICS) Proforma First Edition; Technical Corrigendum 1: 06/15/1993; Technical Corrigendum 2: 12/15/1996;
Technical Corrigendum 3: 12/15/1998
Cements - Test Methods - Determination of Setting Time and Soundness First Edition
Seamless Steel Tubes for Pressure Purposes - Full Peripheral Magnetic Transducer/Flux Leakage Testing of Ferromagnetic Steel
Tubes for the Detection of Transverse Imperfections First Edition
Copper, Lead and Zinc Sulfide Concentrates - Determination of Hygroscopic Moisture in the Analysis Sample - Gravimetric Method
First Edition (PNS 844:1993)
Approval Testing of Welders - Fusion Welding - Part 1: Steels First Edition; Amendment 1-1998
Qualification test of welders Fusion welding Part 2: Aluminium and aluminium alloys Second Edition
ISO
ISO
9606-3
9606-4
Approval Testing of Welders - Fusion Welding - Part 3: Copper and Copper Alloys First Edition
Approval Testing of Welders - Fusion Welding - Part 4: Nickel and Nickel Alloys First Edition
ISO
ISO
9606-5
9608
ISO
9609
ISO
ISO
9611
9612
ISO
ISO
9613-1
9613-2
ISO
9614-1
ISO
9614-2
ISO
9614-3
ISO
ISO
ISO
9615
9616
9617
ISO
ISO
9618
9619
ISO
9622
ISO
9623
Approval Testing of Welders - Fusion Welding - Part 5: Titanium and Titanium Alloys, Zirconium and Zirconium Alloys First Edition
V-Belts - Uniformity of Belts - Test Method for Determination of Centre Distance Variation Second Edition
Aerospace - Nuts, Hexagonal, Plain, Reduced Height, Normal Across Flats, with MJ Threads, Classifications: 450 MPa (at Ambient
Temp.)/120 Deg. C, 450 MPa (at Ambient Temp.)/235 Deg. C, 600 MPa (at Ambient Temp.)/425 Deg. C, 900 MPa (at Ambient
Temp.)/235 Deg. C, 900 MPa (at Ambient Temp.)/315 Deg. C, 900 MPa (at Ambient Temp.)/650 Deg. C, 1 100 MPa (at Ambient
Temp.)/235 Deg. C, 1 100 MPa (at Ambient Temp.)/730 Deg. C and 1250 MPa (at Ambient Temp.)/600 Deg. C - Dimensions First
Edition
Acoustics - Characterization of Sources of Structure- Borne Sound with Respect to Sound Radiation from Connected Structures Measurement of Velocity at the Contact Points of Machinery When Resiliently Mounted First Edition
Acoustics - Guidelines for the Measurement and Assessment of Exposure to Noise in a Working Environment First Edition
Acoustics - Attenuation of Sound During Propagation Outdoors - Part 1: Calculation of the Absorption of Sound by the Atmosphere
First Edition
Acoustics - Attenuation of Sound During Propagation Outdoors - Part 2: General Method of Calculation First Edition
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 1: Measurement at Discrete Points
First Edition (CEN EN ISO 9614-1: 1995)
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 2: Measurement by Scanning First
Edition
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 3: Precision Method for
Measurement by Scanning First Edition
Woodworking Machines - Vertical Shredding Machines for Wood Wool Production, with Hydraulic Clamping - Nomenclature First
Edition
Woodworking Machines - Circular Sawing Machines for Building Sites - Nomenclature First Edition
Woodworking Machines - Lifting Tables and Stages - Nomenclature First Edition
Aerospace-Nuts, Hex., Slotted (Castellated), Red. Hght., Norm. Across Flats, With MJ Threads, Cl.s: 450MPa (at Ambient Temp)/120
Deg. C,450MPa (at Ambient Temp)/235 Deg. C, 600MPa(at Ambient Temp)/425 Deg. C, 900MPa(at Ambient Temp)/235 Deg. C,
900Mpa(at Ambient Temp)/315 Deg. C, 900MPa(at Ambient Temp)/650 Deg. C, 1100MPa(at Ambient Temp)/235 Deg. C,
1100MPa(at Ambient Temp)/730 Deg., and 1250MPa First Edition
Passenger Cars - Windscreen Wiping Systems - Test Method First Edition Amendment 1; 7/01/2002
Whole Milk - Determination of Milkfat, Protein and Lactose Content - Guidance on the Operation of Mid-Infrared Instruments First
Edition
PE/Metal and PP/Metal Adaptor Fittings for Pipes for Fluids Under Pressure - Design Lengths and Size of Threads - Metric Series
First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9624
9625
9626
9628
9631
9633
9634
ISO
9635-1
ISO
9635-2
ISO
9635-3
ISO
9635-4
ISO
9635-5
ISO
9636-1
ISO
9636-2
ISO
9636-3
ISO
9636-4
ISO
9636-5
ISO
9636-6
ISO
9637-1
ISO
9637-2
ISO
9638-3
Thermoplastics Pipes for Fluids under Pressure - Mating Dimensions of Flange Adapters and Loose Backing Flanges First Edition
Mechanical Joint Fittings for Use with Polyethylene Pressure Pipes for Irrigation Purposes First Edition
Stainless Steel Needle Tubing for Manufacture of Medical Devices Amendment 1:06/01/2001
Rolling bearings Insert bearings and eccentric locking collars Boundary dimensions and tolerances Second Edition
Rubber seals Joint rings for pipelines for hot-water supply up to 110 C Specification for the material Second Edition
Cycle Chains - Characteristics and Test Methods Second Edition
Aerospace - Fluid Systems - Dimensions of Plastic Protective Caps and Plugs First Edition
Agricultural irrigation equipment Irrigation valves Part 1: General requirements First Edition; Together with ISO 9635-2, ISO 9635-3,
ISO 9635-4 and ISO 9635-5 replaces ISO 9635:1990
Agricultural irrigation equipment Irrigation valves Part 2: Isolating valves First Edition; Together with ISO 9635-1, ISO 9635-3, ISO
9635-4 and ISO 9635-5 replaces ISO 9635:1990
Agricultural irrigation equipment Irrigation valves Part 3: Check valves First Edition; Together with ISO 9635-1, ISO 9635-2, ISO
9635-4 and ISO 9635-5 replaces ISO 9635:1990 [Superseded: ISO 9952]
Agricultural irrigation equipment Irrigation valves Part 4: Air valves First Edition; Together with ISO 9635-1, ISO 9635-2, ISO 9635-3
and ISO 9635-5 replaces ISO 9635:1990 [Superseded: ISO 11419]
Agricultural irrigation equipment Irrigation valves Part 5: Control valves First Edition; Together with ISO 9635-1, ISO 9635-2, ISO
9635-3 and ISO 9635-4 replaces ISO 9635:1990
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional
Specification - Part 1: Overview, Profiles, and Conformance First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional
Specification - Part 2: Control First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional
Specification - Part 3: Output First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional
Specification - Part 4: Segments First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional
Specification - Part 5: Input and Echoing First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional
Specification - Part 6: Raster First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Data Stream
Binding - Part 1: Character Encoding First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Data Stream
Binding - Part 2: Binary Encoding First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Language
Bindings - Part 3: Ada First Edition
ISO
ISO
ISO
9642
9644
9645
ISO
9646-1
ISO
9646-2
ISO
9646-3
ISO
9646-4
ISO
9646-5
ISO
9646-6
ISO
9646-7
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9647
9648
9649
9650-1
9650-2
9650-3
9652-2
9652-4
9652-5
9653
9654
9655
9656
9657
9658
Cinematography - Time and Control Code for 24, 25 and 30 Frames Per Second Motion-Picture Systems - Specifications First Edition
Agricultural Irrigation Equipment - Pressure Losses in Irrigation Valves - Test Method First Edition; Amendment 1-1998
Acoustics - Measurement of Noise Emitted by Two-Wheeled Mopeds in Motion - Engineering Method First Edition
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 1: General
Concepts Second Edition; CEN EN 29646-1: 1992; CAN/CSA-ISO/IEC 9646-1-95 CEN EN ISO/IEC 9646-1: 1996
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 2: Abstract Test
Suite Specification Second Edition; CAN/CSA-ISO/IEC-9646-2-95; CEN EN ISO/IEC 9646-2: 1996
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 3: The Tree and
Tabular Combined Notation (TTCN) Second Edition
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 4: Test
Realization Second Edition; CAN/CSA-ISO/IEC 9646-4-95; CEN EN ISO/IEC 9646-4: 1996
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 5: Requirements
on Test Laboratories and Clients for the Conformance Assessment Process Second Edition; CAN/CSA-ISO/IEC 9646-5-95; CEN EN
ISO/IEC 9646-5: 1996
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 6: Protocol
Profile Test Specification First Edition; CEN EN ISO/IEC 9646-6: 1996
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 7:
Implementation Conformance Statements First Edition; Corrigendum 1 04/01/1997
Steel and Iron - Determination of Vanadium Content - Flame Atomic Absorption Spectrometric Method First Edition AS/NZS 1050.38:
1994)
Sorghum - Determination of Tannin Content First Edition
Metallic Materials - Wire - Reverse Torsion Test First Edition
Small craft Inflatable liferafts Part 1: Type I First Edition
Small craft Inflatable liferafts Part 2: Type II First Edition
Small craft Inflatable liferafts Part 3: Material First Edition
Masonry - Part 2: Unreinforced Masonry Design by Simple Rules First Edition
Masonry - Part 4: Test Methods First Edition
Masonry - Part 5: Vocabulary First Edition
Adhesives - Test Method for Shear Impact Strength of Adhesive Bonds Second Edition
Pliers and nippers for electronics Single-purpose nippers Cutting nippers Second Edition
Pliers and nippers for electronics Single-purpose pliers Pliers for gripping and manipulating Second Edition
Pliers and nippers for electronics Test methods Second Edition
Pliers and nippers for electronics General technical requirements Second Edition
Steel - Determination of Aluminium Content - Flame Atomic Absorption Spectrometric Method First Edition
ISO
9660
ISO
9661
ISO
9662
ISO
ISO
ISO
ISO
ISO
9664
9665
9666
9667
9668
ISO
ISO
ISO
ISO
9669
9678
9679
9680
ISO
ISO
9681
9682-1
ISO
ISO
ISO
9682-2
9683-1
9684
ISO
ISO
9686
9687
ISO
9688
ISO
9689
ISO
9691
ISO
ISO
9692-1
9692-2
Information Processing - Volume and File Structure of CD-ROM for Information Interchange First Edition; (Corrected and Reprinted 1988)
Information Technology - Data Interchange on 12,7 mm Wide Magnetic Tape Cartridges - 18 Tracks, 1 491 Data Bytes per Millimetre
Second Edition
Aircraft Equipment - Environmental and Operating Conditions for Airborne Equipment - Humidity, Temperature and Pressure Tests
First Edition
Adhesives - Test Methods for Fatigue Properties of Structural Adhesives in Tensile Shear First Edition (CEN EN ISO 9664: 1995)
Adhesives - Animal Glues - Methods of Sampling and Testing Second Edition
Aircraft - Self-Propelled Lavatory-Servicing Vehicle - Functional Requirements First Edition
Aircraft Ground Support Equipment - Tow Bars First Edition
Pulps - Determination of Magnesium Content - Flame Atomic Absorption Spectrometric Method First Edition
Series 1 Freight Containers - Interface Connections for Tank Containers Amendment 1: Sections 3 and 4 First Edition; Amendment 1:
1992
Aircraft - Self-Propelled Potable-Water Vehicle First Edition
Aerospace Clamps for fluid systems Test methods First Edition
Dentistry ù Operating lights Second Edition
Manganese Ores and Concentrates - Determination of Iron Content - Flame Atomic Absorption Spectrometric Method First Edition
Iron Ores - Determination of Manganese Content - Part 1: Flame Atomic Absorption Spectrometric Method First Edition
Iron ores Determination of manganese content Part 2: Periodate spectrophotometric method First Edition;:1986 [Replaced: ISO
3886]
Iron ores Determination of vanadium Part 1: BPHA spectrophotometric method First Edition;:1991
Iron Ores - Determination of Vanadium Content - Flame Atomic Absorption Spectrometric Methods First Edition
Direct reduced iron Determination of carbon and/or sulfur High-frequency combustion method with infrared measurement Second
Edition
Dental Equipment - Graphical Symbols First Edition; (CEN EN ISO 9687: 1995)
Mechanical Vibration and Shock - Analytical Methods of Assessing Shock Resistance of Mechanical Systems - Information Exchange
Between Suppliers and Users of Analyses First Edition
Raw Optical Glass - Resistance to Attack by Aqueous Alkaline Phosphate-Containing Detergent Solutions at 50 Degrees Celsius Testing and Classification First Edition
Rubber - Recommendations for the Workmanship of Pipe Joint Rings - Description and Classification of Imperfections First Edition
Welding and allied processes Recommendations for joint preparation Part 1: Manual metal-arc welding, gas-shielded metal-arc
welding, gas welding, TIG welding and beam welding of steels First Edition;
Welding and Allied Processes - Joint Preparation - Part 2: Submerged Arc Welding of Steels First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9692-3
9692-4
9693
9696
9697
9698
9699
9701
ISO
ISO
ISO
ISO
9702
9704
9705
9706
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9707
9709
9711-1
9711-2
9712 CORR 1
9712
9713
9714-1
9717
9719
9722
9723
9724
9725
9727-1
ISO
ISO
9727-2
9727-3
ISO
ISO
9727-4
9727-5
Welding and Allied Processes - Recommendations for Joint Preparation - Part 3: Metal Inert Gas Welding and Tungsten Inert Gas
Welding of Aluminium and its Alloys First Edition
Welding and allied processes - Recommendations for joint preparation Part 4: Clad steels First Edition
Metal-Ceramic Dental Restorative Systems Second Edition; Amendment 1: 10/01/2005
Water Quality - Measurement of Gross Alpha Activity in Non- Saline Water - Thick Source Method First Edition
Water Quality - Measurement of Gross Beta Activity in Non- Saline Water First Edition
Water Quality - Determination of Tritium Activity Concentration - Liquid Scintillation Counting Method First Edition
Performance Standards in Building - Checklist for Briefing - Contents of Brief for Building Design First Edition
Wrist and Pocket Watches - Fitting Diameters for Hour, Minute and Second Hands First Edition
Plastics - Amine Epoxide Hardeners - Determination of Primary, Secondary and Tertiary Amine Group Nitrogen Content First Edition
Passenger Cars - Wiper Systems - Shaft Ends and Arm-Holes First Edition
Fire Tests - Full-Scale Room Test for Surface Products First Edition; (Corrigendum 1 - 1993) (Corrected and Reprinted 1996)
Information and Documentation - Paper for Documents - Requirements for Permanence First Edition
Information and Documentation - Statistics on the Production and Distribution of Books, Newspapers, Periodicals and Electronic
Publications First Edition (CEN EN ISO 9707 : 1994)
Structural timber - Visual strength grading - Basic principles First Edition
Freight Containers - Information Related to Containers on Board Vessels - Part 1: Bay Plan System First Edition
Freight Containers - Information Related to Containers on Board Vessels - Part 2: Telex Data Transmission First Edition
Non-destructive testing ù Qualification and certification of personnel TECHNICAL CORRIGENDUM 1 Third Edition
Non-destructive testing ù Qualification and certification of personnel Third edition
Neurosurgical Implants - Self-Closing Intracranial Aneurysm Clips Second Edition
Orthopaedic Drilling Instruments - Part 1: Drill Bits, Taps and Countersink Cutters First Edition
Phosphate Conversion Coatings for Metals - Method of Specifying Requirements First Edition
Root Vegetables - Cold Storage and Refrigerated Transport First Edition
Nickel and Nickel Alloys - Composition and Forms of Wrought Products First Edition
Nickel and Nickel Alloy Bars First Edition
Nickel and Nickel Alloy Wire and Drawing Stock First Edition
Nickel and Nickel Alloy Forgings First Edition
Cylindrical cork stoppers - Physical tests - Part 1: Determination of dimensions First Edition [Superseded: ISO 9727]
Cylindrical cork stoppers ù Physical tests ù Part 2: Determination of mass and apparent density for agglomerated cork stoppers First
Edition [Superseded: ISO 9727]
Cylindrical cork stoppers ù Physical tests ù Part 3: Determination of humidity content First Edition [Superseded: ISO 9727]
Cylindrical cork stoppers ù Physical tests ù Part 4: Determination of dimensional recovery after compression First Edition
[Superseded: ISO 9727]
Cylindrical cork stoppers ù Physical tests ù Part 5: Determination of extraction force First Edition [Superseded: ISO 9727]
ISO
ISO
9727-6
9727-7
Cylindrical cork stoppers ù Physical tests ù Part 6: Determination of liquid tightness First Edition [Superseded: ISO 9727]
Cylindrical cork stoppers ù Physical tests ù Part 7: Determination of dust content First Edition [Superseded: ISO 9727]
Electronic data interchange for administration, commerce and transport (EDIFACT) Application level syntax rules (Syntax version
number: 4, Syntax release number: 1) Part 1: Syntax rules common to all parts Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) - Part 2: Syntax Rules Specific to Batch EDI Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) - Part 3: Syntax Rules Specific to Interactive EDI Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) - Part 4: Syntax and Service Report Message for Batch EDI (Message Type CONTRL) Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) - Part 5: Security Rules for Batch EDI (Authenticity, Integrity and Non-Repudiation of
Origin) Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) - Part 6: Secure Authentication and Acknowledgement Meassage (Message Type AUTACK) Second Edition
ISO
9735-1
ISO
9735-2
ISO
9735-3
ISO
9735-4
ISO
9735-5
ISO
9735-6
ISO
9735-7
ISO
9735-8
ISO
9735-9
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) - Part 7: Security Rules for Batch EDI (Confidentiality) Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) - Part 8: Associated Data in EDI Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) Part 9: Security Key and Certificate Management Message (Message Type
KEYMAN) Second Edition
ISO
ISO
9735-10
9736
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) Part 10: Syntax Service Directories Replaces ISO 9735-1 Thru 9735-9
Aerospace - Eye-Ends, in Steel, Threaded, for Aircraft Control Wire Rope - Dimensions and Loads First Edition
ISO
ISO
9737
9738
ISO
9747
Aerospace - Eye-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition
Aerospace - Turnbarrels, for Aircraft Control Wire Rope - Dimensions and Loads First Edition
Aerospace - Double-Shank Ball-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads
First Edition
ISO
9748
Aerospace - Ball-Ends, in corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition
ISO
ISO
9749
9757
Aerospace - Stud-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition
Aerospace - Fork-Ends, in Steel, Threaded, for Aircraft Control Wire Rope Turnbarrels - Dimensions and Loads First Edition
ISO
9758
Aerospace - Fork-Ends, in Steel, Threaded, for Rolling Bearings, for Aircraft Control Wire Rope - Dimensions and Loads First Edition
ISO
9759
ISO
9760
Aerospace - Fork-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition
Aerospace - Fork-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope, for Rolling Bearings - Dimensions and
Loads First Edition
ISO
ISO
ISO
9761
9762
9763
ISO
9764
ISO
ISO
ISO
9765
9766
9768
ISO
9770
ISO
9771
ISO
9772
ISO
ISO
9773
9774
ISO
9775
ISO
9776
ISO
ISO
9779
9782
Aerospace - Locking Clips, in Corrosion-Resistant Steel, for Aircraft Control Wire Rope Turnbuckles - Dimensions First Edition
Aerospace - Aircraft Control Wire Rope Assemblies - Dimensions and End-Fitting Combinations First Edition
Aerospace - Aircraft Control Wire Rope Assemblies - Technical Specification First Edition
Electric Resistance and Induction Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of the Weld Seam for the
Detection of Longitudinal Imperfections First Edition
Submerged Arc-Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of the Weld Seam for the Detection of Longitudinal
and/or Transverse Imperfections First Edition
Drills with Indexable Inserts - Cylindrical Shanks with a Parallel Flat First Edition
Tea - Determination of Water Extract Second Edition; Technical Corrigendum 1-1998
Crude Petroleum and Petroleum Products - Compressibility Factors for Hydrocarbons in the Range 638 kg/m3 to 1 074 kg/m3 First
Edition; (Corrected and Reprinted -1989)
Plastics - Phenolic Resins - Determination of the Pseudo-Adiabatic Temperature Rise of Liquid Resols When Cured Under Acid
Conditions Second Edition
Cellular Plastics - Determination of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame Second
Edition; Amendment 1: 9/15/2003
Plastics - Determination of Burning Behaviour of Thin Flexible Vertical Specimens in Contact with a Small-Flame Ignition Source
Second Edition; Amendment 1: 09/15/2003
Thermal insulation for building applications Guidelines for selecting properties First Edition; Replaces TR 9774:1990
Small Craft - Remote Steering Systems for Single Outboard Motors of 15 kW to 40 kW Power First Edition (CEN EN 29775: 1993)
Oil of Mentha Arvensis, Partially Dementholized (Mentha Arvensis L. Var. Piperascens Malinv. and Var. Glabrata Holmes) First
Edition
Metallurgical-Grade Fluorspar - Determination of Lead Content - Solvent Extraction Atomic Absorption Spectrometric Method Second
Edition
Plastics - Reinforced Moulding Compounds and Prepregs - Determination of Apparent Volatile-Matter Content First Edition
ISO
ISO
9785
9787
ISO
9788
ISO
9796-2
ISO
9796-3
ISO
9797-1
ISO
ISO
9797-2
9798-1
ISO
9798-2
ISO
9798-3
ISO
9798-4
ISO
9798-5
ISO
ISO
ISO
9798-6
9801
9802
ISO
9803-1
ISO
9803-2
ISO
9804
ISO
9805-1
ISO
9805-2
Ships and Marine Technology - Ventilation of Cargo Spaces Where Vehicles With Internal Combustion Engines are Driven Calculation of Theoretical Total Airflow Required Second Edition
Manipulating Industrial Robots - Coordinate Systems and Motion Nomenclatures Second Edition
Air Cargo Equipment - Cast Components of Double Stud Fitting Assembly with a Load Capacity of 22 250 N (5 000 lbf), for Aircraft
Cargo Restraint First Edition
Information Technology - Security Techniques - Digital Signature Schemes Giving Message Recovery - Part 2: Integer Factorization
Based Mechanisms Second Edition
Information technology Security techniques Digital signature schemes giving message recovery Part 3: Discrete logarithm based
mechanisms Second Edition
Information Technology - Security Techniques - Message Authentication Codes (MACs) - Part 1: Mechanisms Using a Block Cipher
First Edition; Replaces ISO 9797
Information Technology - Security Techniques - Message Authentication Codes (MACs) - Part 2: Mechanisms Using a Dedicated
Hash-Function First Edition; Replaces ISO 9797
Information Technology - Security Techniques - Entity Authentication - Part 1: General Second Edition
Information Technology - Security Techniques - Entity Authentication - Part 2: Mechanisms Using Symmetric Encipherment
Algorithms Second Edition; Corrigendum 1: 02/01/2004
Information Technology - Security Techniques - Entity Authentication - Part 3: Mechanisms Using Digital Signature Techniques
Second Edition
Information Technology - Security Techniques - Entity Authentication - Part 4: Mechanisms Using a Cryptographic Check Function
Second Edition
Information Technology - Security Techniques - Entity Authentication - Part 5: Mechanisms Using Zero-Knowledge Techniques
Second Edition
Information technology - Security techniques - Entity authentication - Part 6: Mechanisms using manual data transfer First Edition
Ophthalmic Instruments - Trial Case Lenses First Edition
Raw Optical Glass - Vocabulary First Edition
Vacuum technology ù Mounting dimensions of pipeline fittings ù Part 1: Non knife-edge flange type FIRST EDITION [Replaced: ISO
9803]
Vacuum technology ù Mounting dimensions of pipeline fittings ù Part 2: Knife-edge flange type FIRST EDITION [Replaced: ISO 9803]
Information Technology - Open Systems Interconnection - Service Definition for the Commitment, Concurrency and Recovery Service
Element Third Edition
Information Technology - Open Systems Interconnection - Protocol for the Commitment, Concurrency and Recovery Service
Element: Protocol Specification Third Edition
Information Technology - Open Systems Interconnection - Protocol for the Commitment, Concurrency and Recovery Service
Element: Protocol Implementation Conformance Statement (PICS) Proforma First Edition
ISO
ISO
9806-1
9806-2
ISO
9806-3
ISO
9808
ISO
9809-1
ISO
9809-2
ISO
ISO
ISO
9809-3
9815
9816
ISO
ISO
ISO
ISO
ISO
9817
9818
9825
9826
9827
ISO
ISO
ISO
9831
9832
9833
ISO
9834-1
ISO
9834-2
ISO
9834-3
ISO
9834-4
ISO
9834-5
Test Methods for Solar Collectors - Part 1: Thermal Performance of Glazed Liquid Heating Collectors Including Pressure Drop First
Edition
Test Methods for Solar Collectors - Part 2: Qualification Test Procedures First Edition
Test Methods for Solar Collectors - Part 3: Thermal Performance of Unglazed Liquid Heating Collectors (Sensible Heat Transfer
Only) Including Pressure Drop First Edition
Solar Water Heaters - Elastomeric Materials for Absorbers, Connecting Pipes and Fittings - Method of Assessment First Edition
Gas Cylinders - Refillable Seamless Steel Gas Cylinders - Design, Construction and Testing - Part 1: Quenched and Tempered Steel
Cylinders with Tensile Strength Less Than 1 100 MPa First Edition
Gas Cylinders - Refillable Seamless Steel Gas Cylinders - Design, Construction and Testing Part 2: Quenched and Tempered Steel
Cylinders with Tensile Strength Greater Than or Equal to 1 100 MPa First Edition
Gas Cylinders - Refillable Seamless Steel Gas Cylinders - Design, Construction and Testing - Part 3: Normalized Steel Cylinders
First Edition; Together with ISO 9809-1 and ISO 9809-2, Cancels and Replaces ISO 4705:1983
Road Vehicles - Passenger-Car and Trailer Combinations - Lateral Stability Test Second Edition
Passenger cars Power-off reaction of a vehicle in a turn Open-loop test method Second Edition
Passenger Cars - Engine Cooling Systems - Dimensions of Pressure Caps and Their Ramp Seats on Filler Necks First Edition
Passenger Cars - Engine Cooling Systems - Test Methods and Marking of Pressure Caps First Edition
Hydrometry Field measurement of discharge in large rivers and rivers in flood Second edition
Measurement of Liquid Flow in Open Channels - Parshall and SANIIRI Flumes First Edition
Measurement of Liquid Flow in Open Channels by Weirs and Flumes - Streamlined Triangular Profile Weirs First Edition
Animal Feeding Stuffs, Animal Products, and Faeces or Urine - Determination of Gross Calorific Value - Bomb Calorimeter Method
First Edition
Animal and Vegetable Fats and Oils - Determination of Residual Technical Hexane Content Second Edition
Melons - Cold Storage and Refrigerated Transport First Edition
Information technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: General
procedures and top arcs of the ASN.1 Object Identifier tree Second Edition
Information Technology - Open Systems Interconnection - Procedures for the Operation of OSI Registration Authorities: - Part 2:
Registration Procedures for OSI Document Types First Edition; AS/NZS 4153.2: 1994
Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities: Registration of
Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T Third edition
Information Technology - Open Systems Interconnection - Procedures for the Operation of OSI Registration Authorities - Part 4:
Register of VTE Profiles First Edition
Information Technology - Open Systems Interconnection - Procedures for the Operation of OSI Registration Authorities - Part 5:
Register of VT Control Object Definitions First Edition (AS/NZS 4153.5: 1993)
ISO
9834-6
ISO
9834-7
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9834-8
9835
9836
9838
9841
9842
9843
9844
ISO
ISO
ISO
ISO
9845-1
9846
9847
9848
ISO
9849
ISO
9851
ISO
9852
ISO
9853
ISO
9854-1
ISO
9854-2
ISO
ISO
ISO
9855
9856
9862
ISO
9863-1
Information Technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: Registration
of application processes and application entities Second edition
Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities: Joint ISO and
ITU-T Registration of International Organizations Second edition
Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities: Joint ISO and
ITU-T Registration of International Organizations First edition
Ambient Air - Determination of a Black Smoke Index First Edition
Performance Standards in Building - Definition and Calculation of Area and Space Indicators First Edition
Alpine Ski-Bindings - Test Soles for Ski- Binding Tests First Edition
Oil of Hyssop (Hyssopus Officinalis Linnaeus) First Edition
Oil of Rose (Rosa x Damascena Miller) Second Edition
Oil of Cedarwood, Chinese Type (Cupressus Funebris Endlicher) Second Edition
Oil of bitter orange (Citrus aurantium L.) Second Edition
Solar Energy - Reference Solar Spectral Irradiance at the Ground at Different Receiving Conditions - Part 1: Direct Normal and
Hemispherical Solar Irradiance for Air Mass 1,5 First Edition
Solar Energy - Calibration of a Pyranometer Using a Pyrheliometer First Edition
Solar Energy - Calibration of Field Pyranometers by Comparison to a Reference Pyranometer First Edition
Photography Source document microfilms Determination of ISO speed and ISO average gradient Second Edition
Optics and Optical Instruments - Geodetic and Surveying Instruments - Vocabulary Optique Et Instruments D'Optique - Instruments
Geodesiques Et D'Observation - Vocabulaire Second Edition
Continuous Mechanical Handling Equipment - Overhead Electrical Monorail Conveyors - Definitions and Safety Rules First Edition
Unplasticized poly(vinyl chloride) (PVC-U) pipes ù Dichloromethane resistance at specified temperature (DCMT) ù Test method
Second Edition
Injection-Moulded Unplasticized Poly(Vinyl Chloride) (PVC-U) Fittings for Pressure Pipe Systems - Crushing Test First Edition
Thermoplastics Pipes for the Transport of Fluids - Determination of Pendulum Impact Strength by the Charpy Method - Part 1:
General Test Method First Edition
Thermoplastics Pipes for the Transport of Fluids - Determination of Pendulum Impact Strength by the Charpy Method - Part 2: Test
Conditions for Pipes of Various Materials First Edition
Ambient Air - Determination of the Particulate Lead Content of Aerosols Collected on Filters - Atomic Absorption Spectrometric
Method First Edition
Conveyor belts Determination of elastic and permanent elongation and calculation of elastic modulus Second Edition
Geosynthetics Sampling and preparation of test specimens Second edition
Geosynthetics Determination of thickness at specified pressures Part 1: Single layers First edition; Cancels and replaces ISO
9863:1990
ISO
9863-2
ISO
9864
ISO
9865
ISO
9866-1
ISO
ISO
9866-2
9867
ISO
ISO
ISO
ISO
ISO
ISO
9869
9873
9874
9875
9876
9878
ISO
9882
ISO
ISO
9883
9884-1
ISO
9884-2
ISO
ISO
9885
9886
ISO
9887
ISO
9888
ISO
9889
ISO
9891
Geotextiles and Geotextile-Related Products - Determination of Thickness at Specified Pressures - Part 2: Procedure for
Determination of Thickness of Single Layers of Multilayer Products First Edition CEN EN ISO 9863-2: 1996
Geosynthetics Test method for the determination of mass per unit area of geotextiles and geotextile-related products Second edition
Textiles - Determination of Water Repellency of Fabrics by the Bundesmann Rain-Shower Test First Edition; (Corrected and
Reprinted -1992) (CEN EN 29865: 1993)
Textiles - Effect of Dry Heat on Fabrics Under Low Pressure - Part 1: Procedure for Dry-Heat Treatment of Fabrics First Edition
Textiles - Effect of Dry Heat on Fabrics Under Low Pressure - Part 2: Determination of Dimensional Change in Fabrics Exposed to
Dry Heat First Edition
Textiles - Evaluation of the Wrinkle Recovery of Fabrics - Appearance Method First Edition
Thermal Insulation - Building Elements - In-Situ Measurements of Thermal Resistance and Thermal Transmittance First Edition
Dental Hand Instruments - Reusable Mirrors and Handles Second Edition; Corrigendum 1: 06-15-2000
Milk Determination of total phosphorus content Method using molecular absorption spectrometry Second Edition
Ships and marine technology Marine echo-sounding equipment Third Edition; Technical Corrigendum 1: 02/15/2006
Ships and Marine Technology - Marine Facsimile Receivers for Meteorological Charts Second Edition
Micrographics - Graphical Symbols for Use in Microfilming First Edition
Performance Standards in Building - Performance Test for Precast Concrete Floors - Behaviour Under Non-Concentrated Load First
Edition
Performance Standards in Building - Performance Test for Precast Concrete Floors - Behaviour Under Concentrated Load First
Edition
Tea Sacks - Specification - Part 1: Reference Sack for Palletized and Containerized Transport of Tea First Edition
Tea Sacks - Specification - Part 2: Performance Specification for Sacks for Palletized and Containerized Transport of Tea First
Edition
Wide-Mouth Glass Containers - Deviation from Flatness of Top Sealing Surface - Test Methods First Edition (CEN EN 29885: 1994)
Ergonomics Evaluation of thermal strain by physiological measurements Second Edition
Water Quality - Evaluation of the Aerobic Biodegradability of Organic Compounds in an Aqueous Medium - Semi-Continuous
Activated Sludge Method (SCAS) First Edition; (CEN EN ISO 9887:1994)
Water Quality - Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium - Static Test (ZahnWellens Method) Second Edition
Determination of Carbon Content in Uranium Dioxide Powder and Sintered Pellets - Resistance Furnace Combustion - Titrimetric
/Coulometric/Infrared Absorption Method First Edition
Determination of Carbon Content in Uranium Dioxide Powder and Sintered Pellets - High-Frequency Induction Furnace Combustion Titrimetric/Coulometric/ Infrared Absorption Methods First Edition
ISO
ISO
ISO
ISO
9892
9894
9895
9896
ISO
ISO
ISO
9897
9898
9899
ISO
9902-1
ISO
9902-2
ISO
9902-3
ISO
9902-4
ISO
9902-5
ISO
9902-6
ISO
9902-7
ISO
9903-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9903-2
9904
9905
9906
9908
9909
9910
9911
9912-1
Uranium Metal, Uranium Dioxide Powder and Pellets, and Uranyl Nitrate Solutions - Determination of Fluorine Content - Fluoride Ion
Selective Electrode Method First Edition
Subsampling of Uranium Hexafluoride in the Liquid Phase First Edition
Paper and Board - Compressive Strength - Short Span Test First Edition
Plastics Traps for Discharge Pipework Systems Inside Buildings First Edition
Freight Containers - Container Equipment Data Exchange (CEDEX) - General Communication Codes First Edition; Technical
Corrigendum 1 - 06/15/2001
Equipment for Crop Protection - Test Methods for Air-Assisted Sprayers for Bush and Tree Crops First Edition
Programming Languages - C Second Edition; Technical Corrigendum 1: 09/01/2001; Technical Corrigendum 2: 11/15/2004
Textile Machinery - Noise Test Code - Part 1: Common Requirements First Edition; Together with ISO 9902-2, ISO 9902-3, ISO 99024, ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993
Textile Machinery - Noise Test Code - Part 2: Spinning Preparatory and Spinning Machinery First Edition; Together with ISO 9902-1,
ISO 9902-3, ISO 9902-4, ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993
Textile Machinery - Noise Test Code - Part 3: Nonwoven Machinery First Edition; Together with ISO 9902-1, ISO 9902-2, ISO 9902-4,
ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993
Textile Machinery - Noise Test Code - Part 4: Yarn Processing, Cordage and Rope Manufacturing Machinery First Edition; Together
with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993
Textile Machinery - Noise Test Code - Part 5: Weaving and Knitting Preparatory Machinery First Edition; Together with ISO 9902-1,
ISO 9902-2, ISO 9902-3, ISO 9902-4, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993
Textile Machinery - Noise Test Code - Part 6: Fabric Manufacturing Machinery First Edition; Together with ISO 9902-1, ISO 9902-2,
ISO 9902-3, ISO 9902-4, ISO 9902-5 and ISO 9902-7 Cancels and Replaces 9902: 1993
Textile Machinery - Noise Test Code - Part 7: Dyeing and Finishing Machinery First Edition; Together with ISO 9902-1, ISO 9902-2,
ISO 9902-3, ISO 9902-4, ISO 9902-5 and ISO 9902-6 Cancels and Replaces 9902: 1993
Textile Machinery and Accessories - Main Dimensions for Section Wires for Metallic Card Clothing - Part 1: Foot Without Interlocking
or Interchaining First Edition; Replaces ISO 9903
Textile Machinery and Accessories - Main Dimensions for Section Wires for Metallic Card Clothing - Part 2: Foot with Interchaining
First Edition; Replaces ISO 9903
Textile Machinery and Accessories - Steel Pins for Spinning Preparatory and Spinning Machinery Second Edition
Technical specifications for centrifugal pumps - Class I First Edition; Corrigendum 1:2005
Rotodynamic Pumps - Hydraulic Performance Acceptance Tests - Grades 1 and 2 First Edition
Technical Specifications for Centrifugal Pumps - Class III First Edition
Oil of Dalmatian Sage (Salvia Officinalis L.) First Edition
Oil of Sweet Orange - Determination of the Total Carotenoids Content First Edition
Agricultural irrigation equipment Manually operated small plastics valves Second Edition
Agricultural irrigation equipment Filters for micro-irrigation Part 1: Terms, definitions and classification First Edition
ISO
ISO
ISO
ISO
ISO
ISO
9912-2
9912-3
9915
9916
9917-1
9917-2
ISO
9919
ISO
ISO
ISO
9920
9921
9923
ISO
9924-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9924-2
9926-1
9926-3
9927-1
9927-3
9928-1
9928-2
9930
9931
ISO
9932
ISO
ISO
ISO
ISO
ISO
9933
9934-1
9934-2
9934-3
9935
ISO
9936
Agricultural Irrigation Equipment - Filters - Part 2: Strainer-Type Filters First Edition
Agricultural Irrigation Equipment - Filters - Part 3: Automatic Self- Cleaning Strainer-Type Filters First Edition
Aluminium Alloy Castings - Radiography Testing First Edition
Aluminium Alloy and Magnesium Alloy Castings - Liquid Penetrant Inspection First Edition
Dentistry Water-based cements Part 1: Powder/liquid acid-base cements First Edition
Dental Water-Based Cements - Part 2: Light-Activated Cements First Edition
Medical electrical equipment Particular requirements for the basic safety and essential performance of pulse oximeter equipment for
medical use Second edition
Ergonomics of the thermal environment ù Estimation of thermal insulation and water vapour resistance of a clothing ensemble
Second Edition
Ergonomics Assessment of speech communication First Edition
Micrographics - Transparent A6 Microfiche - Image Arrangements First Edition
Rubber and Rubber Products - Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravimetry Part 1: Butadiene, Ethylene-Propylene Copolymer and Terpolymer, Isobutene-Isoprene, Isoprene and Styrene-Butadiene Rubbers
Second Edition
Rubber and Rubber Products - Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravimetry Part 2: Acrylonitrile-Butadiene and Halobutyl Rubbers First Edition
Cranes - Training of Drivers - Part 1: General First Edition
Cranes Training of drivers Part 3: Tower cranes First Edition
Cranes - Inspections - Part 1: General First Edition
Cranes Inspections Part 3: Tower cranes First Edition
Cranes - Crane Driving Manual - Part 1: General First Edition
Cranes ù Crane driving manual ù Part 2: Mobile crane operators First Edition
Green Beans - Storage and Refrigerated Transport First Edition
Coal - Sampling of Pulverized Coal Conveyed by Gases in Direct Fired Coal Systems First Edition
Paper and Board - Determination of Water Vapour Transmission Rate of Sheet Materials - Dynamic Sweep and Static Gas Methods
First Edition
Products in fibre-reinforced cement Long corrugated or asymmetrical section sheets and fittings for roofing and cladding First
Edition; Technical Corrigendum 1: 6/1/1999; Amendment 1: 9/15/2004; Technical Corrigendum 2: 5/15/2005
Non-Destructive Testing - Magnetic Particle Testing - Part 1: General Principles First Edition
Non-Destructive Testing - Magnetic Particle Testing - Part 2: Detection Media First Edition
Non-Destructive Testing - Magnetic Particle Testing - Part 3: Equipment First Edition
Non-Destructive Testing - Penetrant Flaw Detectors - General Technical Requirements First Edition
Animal and vegetable fats and oils Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography
Second Edition
Aerospace - Polytetrafluoroethylene (PTFE) Hose Assemblies, Classification 204 Degrees Celsius/28 000 kPa - Procurement
Specification Second Edition
Aerospace - Pressure Re-Oiling Connection (New Type) First Edition
Cranes - Information Labels - Part 1: General First Edition
Cranes - Information Labels - Part 3: Tower Cranes First Edition
Shipbuilding - Ventilation and Air- Treatment of Galleys and Pantries with Cooking Appliances First Edition
Plastics - Phenolic Resins - Determination of Electrical Conductivity of Resin Extracts First Edition; Corrigendum 1-1997
Information technology ù Portable Operating System Interface (POSIX«) ù Part 1: Base Definitions TECHNICAL CORRIGENDUM 1
Fourth Edition
ISO
ISO
ISO
ISO
ISO
ISO
9938
9939
9942-1
9942-3
9943
9944
ISO
9945-1 CORR 1
ISO
9945-1
ISO
9945-2 CORR 1
ISO
9945-2
ISO
ISO
9945-3 CORR 1
9945-3
ISO
9945-4 CORR 1
ISO
ISO
9945-4
9946
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9947
9949-1
9949-2
9949-3
9950
9951
9957-1
9957-2
9957-3
Information technology ù Portable Operating System Interface (POSIX«) ù Part 4: Rationale Second Edition; IEEE Std 1003.1
Manipulating Industrial Robots - Presentation of Characteristics Second Edition
Textile Machinery and Accessories - Two-for- One Twisters - Vocabulary MatÚriel pour l industrie textile Retordeuses Ó broches
double torsion Vocabulaire Second Edition
Urine Absorbing Aids - Vocabulary - Part 1: Conditions of Urinary Incontinence First Edition
Urine Absorbing Aids - Vocabulary - Part 2: Products First Edition
Urine Absorbing Aids - Vocabulary - Part 3: Identification of Product Types First Edition
Industrial Quenching Oils - Determination of Cooling Characteristics - Nickel -Alloy Probe Test Method First Edition
Measurement of Gas Flow in Closed Conduits - Turbine Meters First Edition; Corrigendum 1: 1994
Fluid Draughting Media - Part 1: Water-Based India Ink - Requirements and Test Conditions First Edition
Fluid Draughting Media - Part 2: Water-Based Non- India Ink - Requirements and Test Conditions First Edition
Fluid Draughting Media - Part 3: Water-Based Coloured Draughting Inks - Requirements and Test Conditions First Edition
ISO
9958-1
Draughting Media for Technical Drawings - Draughting Film with Polyester Base - Part 1: Requirements and Marking First Edition
Information technology ù Portable Operating System Interface (POSIX«) ù Part 1: Base Definitions Fourth Edition; IEEE 1003.1
Information technology ù Portable Operating System Interface (POSIX«) ù Part 2: System Interfaces TECHNICAL CORRIGENDUM 1
Third Edition
Information technology ù Portable Operating System Interface (POSIX«) ù Part 2: System Interfaces Third Edition; IEEE Std
1003.1:2003
Information technology ù Portable Operating System Interface (POSIX«) ù Part 3: Shell and Utilities TECHNICAL CORRIGENDUM 1
Second Edition
Information technology ù Portable Operating System Interface (POSIX«) ù Part 3: Shell and Utilities Second Edition
Information technology ù Portable Operating System Interface (POSIX«) ù Part 4: Rationale TECHNICAL CORRIGENDUM 1 Second
Edition
ISO
9958-2
Draughting Media for Technical Drawings - Draughting Film with Polyester Base - Part 2: Determination of Properties First Edition
ISO
ISO
ISO
ISO
ISO
ISO
9959-1
9960-1
9960-2
9961
9962-1
9962-2
ISO
9963-1
Numerically Controlled Draughting Machines - Drawing Test for the Evaluation of Performance - Part 1: Vector Plotters First Edition
Draughting Instruments with or Without Graduation - Part 1: Draughting Scale Rules First Edition
Draughting Instruments with or Without Graduation - Part 2: Protractors First Edition
Draughting Media for Technical Drawings - Natural Tracing Paper First Edition
Manually Operated Draughting Machines - Part 1: Definitions, Classification and Designation First Edition
Manually Operated Draughting Machines - Part 2: Characteristics, Performance, Inspection and Marking First Edition
Water Quality - Determination of Alkalinity - Part 1: Determination of Total and Composite Alkalinity First Edition (CEN EN ISO 99631: 1995)
ISO
9963-2
ISO
9964-1
ISO
9964-2
ISO
ISO
ISO
ISO
ISO
9964-3
9965
9967
9969
9972
ISO
9973
ISO
9974-1
ISO
9974-2
ISO
9974-3
ISO
ISO
ISO
9974-4
9975
9978
Water Quality - Determination of Alkalinity - Part 2: Determination of Carbonate Alkalinity First Edition (CEN EN ISO 9963-2: 1995)
Water Quality - Determination of Sodium and Potassium - Part 1: Determination of Sodium by Atomic Absorption Spectrometry First
Edition
Water Quality - Determination of Sodium and Potassium - Part 2: Determination of Potassium by Atomic Absorption Spectrometry
First Edition
Water Quality - Determination of Sodium and Potassium - Part 3: Determination of Sodium and Potassium by Flame Emission
Spectrometry First Edition
Water Quality - Determination of Selenium - Atomic Absorption Spectrometric Method (Hydride Technique) First Edition
Thermoplastics Pipes - Determination of Creep Ratio First Edition; (CEN EN ISO 9967: 1995)
Thermoplastics Pipes - Determination of Ring Stiffness First Edition; (CEN EN ISO 9969: 1995)
Thermal performance of buildings Determination of air permeability of buildings Fan pressurization method Second Edition
Information technology Computer graphics, image processing and environmental data representation Procedures for registration of
items Second Edition
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal- to-Metal
Sealing - Part 1: Threaded Ports First Edition
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal- to-Metal
Sealing - Part 2: Stud Ends with Elastomeric Sealing (Type E) First Edition
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal- to-Metal
Sealing - Part 3: Stud Ends with Metal-to-Metal Sealing (Type B) First Edition
Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing
Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
Round Non-Alloy Steel Wires for Locked Coil Mine Winding Ropes - Specifications First Edition
Radiation Protection - Sealed Radioactive Sources - Leakage Test Methods First Edition
ISO
ISO
9980
9981
ISO
ISO
ISO
ISO
ISO
ISO
9982
9983
9984
9985
9986
9987
ISO
9988-1
ISO
9988-2
ISO
9992-1
ISO
ISO
9992-2
9994
ISO
ISO
9995-1
9995-2
ISO
ISO
ISO
ISO
9995-3
9995-4
9995-5
9995-6
ISO
9995-7
ISO
ISO
ISO
9995-8
9996
9997
Belt Drives - Grooved Pulleys for V-Belts (System Based on Effective Width) - Geometrical Inspection of Grooves First Edition
Belt Drives - Pulleys and V-Ribbed Belts for the Automotive Industry - PK Profile: Dimensions Second Edition
Belt Drives - Pulleys and V-Ribbed Belts for Industrial Applications - Dimensions - PH, PJ, PK, PL and PM Profiles: Dimensions
Second Edition
Information Technology - Designation of Unrecorded Flexible Disk Cartridges Second Edition
Information and Documentation - Transliteration of Georgian Characters into Latin Characters First Edition
Information and Documentation - Transliteration of Armenian Characters into Latin Characters First Edition
Composition Cork for Shoe Outsoles First Edition
Motorcycles - Measurement of Variation of Dipped Beam Inclination as a Function of Load First Edition
Plastics - Polyoxymethylene (POM) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Third
Edition
Plastics - Polyoxymethylene (POM) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of
Properties Third Edition
Financial Transaction Cards - Messages Between the Integrated Circuit Card and the Card Accepting Device - Part 1: Concepts and
Structures First Edition (CEN EN 29992-1: 1993)
Financial Transaction Cards - Messages between the Integrated Circuit Card and the Card Accepting Device - Part 2: Functions,
Messages (Commands and Responses), Data Elements and Structures First Edition; Technical Corrigendum 1: 12/15/1999
Lighters - Safety Specification Fourth Edition
Information technology Keyboard layouts for text and office systems Part 1: General principles governing keyboard layouts Second
Edition
Information Technology - Keyboard Layouts for Text and Office Systems - Part 2: Alphanumeric Section Second Edition
Information Technology - Keyboard Layouts for Text and Office Systems - Part 3: Complementary Layouts of the Alphanumeric Zone
of the Alphanumeric Section Second Edition
Information Technology - Keyboard Layouts for Text and Office Systems - Part 4: Numeric Section Second Edition
Information technology Keyboard layouts for text and office systems Part 5: Editing section Second Edition
Information technology Keyboard layouts for text and office systems Part 6: Function section Second Edition
Information technology Keyboard layouts for text and office systems Part 7: Symbols used to represent functions Technologies de
l information Disposition des claviers con us pour la bureautique Partie 7: Symboles employÚs pour la reprÚsentation de fonctions
Second Edition
Information technology Keyboard layouts for text and office systems Part 8: Allocation of letters to the keys of a numeric keypad
Second Edition
Mechanical Vibration and Shock - Disturbance to Human Activity and Performance - Classification First Edition
Dental Cartridge Syringes Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
9998
9999 CORR 1
9999
10002
10005
10006
10007
10012
10014 CORR 1
10014
10015
10019
10021-1
10021-2
ISO
10021-4
ISO
ISO
ISO
10021-5
10021-6
10021-7
Water Quality - Practices for Evaluating and Controlling Microbiological Colony Count Media Used in Water Quality Tests First Edition
Assistive products for persons with disability ù Classification and terminology Fourth Edition
Assistive products for persons with disability ù Classification and terminology Fourth Edition
Quality management Customer satisfaction Guidelines for complaints handling in organizations First Edition
Quality Management Systems - Guidelines for Quality Plans Second Edition
Quality management systems Guidelines for quality management in projects Second Edition
Quality management systems Guidelines for configuration management Second Edition
Measurement Management Systems - Requirements for Measurement Processes and Measuring Equipment First Edition
Quality management ù Guidelines for realizing financial and economic benefits TECHNICAL CORRIGENDUM 1
Quality management Guidelines for realizing financial and economic benefits First Edition;: 1998 [Replaced: ISO TR 10014]
Quality Management - Guidelines for Training First Edition
Guidelines for the selection of quality management system consultants and use of their services First Edition
Information technology Message Handling Systems (MHS) Part 1: System and service overview Second Edition
Information Technology - Message Handling Systems (MHS): Overall Architecture Third Edition
Information Technology - Message Handling Systems (MHS): Message Transfer System - Abstract Service Definition and
Procedures Third Edition
Information Technology - Message Handling Systems (MHS): Message Store: Abstract Service Definition Fourth Edition; Incorporates
Amendment 1: 1998 and Technical Corrigendum 1: 1998
Information Technology - Message Handling Systems (MHS): Protocol Specifications Third Edition
Information Technology - Message Handling Systems (MHS): Interpersonal Messaging System Third Edition
ISO
10021-8
Information technology Message Handling Systems (MHS) Part 8: Electronic Data Interchange Messaging Service Second Edition
ISO
ISO
ISO
10021-9
10021-10
10022
Information Technology - Message Handling Systems (MHS): Electronic Data Interchange Messaging System Second Edition
Information Technology - Message Handling Systems (MHS): MHS Routing Second Edition
Information Technology - Open Systems Interconnection - Physical Service Definition Second Edition
ISO
10026-1
Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 1: OSI TP Model Second Edition
ISO
10026-2
ISO
10026-3
ISO
10026-4
Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 2: OSI TP Service Third Edition
Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 3: Protocol Specification Third
Edition
Information Technology - Open Systems Interconnection - Distributed Transaction Processing: Protocol Implementation
Conformance Statement (PICS) Proforma First Edition
Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 5: Application Context Proforma
and Guidelines When Using OSI TP First Edition
Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 6: Unstructured Data Transfer
First Edition
Information Technology - Information Resource Dictionary System (IRDS) Framework First Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Definition of the Relaying Functions of
a Network Layer Intermediate System First Edition (AS/NZS 4209: 1994)
Information Technology - Telecommunications and Information Exchange Between Systems - End System Routeing Information
Exchange Protocol for Use in Conjunction with ISO/IEC 8878 Second Edition
ISO
10026-5
ISO
ISO
10026-6
10027
ISO
10028
ISO
10030
ISO
10035-1
ISO
10035-2
ISO
ISO
10036
10040
ISO
ISO
10042 CORR 1
10042
ISO
10043
ISO
ISO
ISO
ISO
ISO
10044
10045
10046
10047
10049
ISO
10050
Information Technology - Open Systems Interconnection - Connectionless Protocol for the Association Control Service Element:
Protocol Specification Second Edition; Supersedes ISO 10035; Amendment 1: 12/15/1997; Corrigendum 1:12/15/1999
Information Technology - Open Systems Interconnection - Connectionless Protocol for the Association Control Service Element:
Protocol Implementation Conformance Statement (PICS) Proforma First Edition
Information technology - Font information interchange - Procedures for registration of font-related identifiers Second Edition;
Corrigendum 1: 03-01-2001; Corrigendum 2: 12-01-2002
Information Technology - Open Systems Interconnection - Systems Management Overview Second Edition
Welding ù Arc-welded joints in aluminium and its alloys ù Quality levels for imperfections TECHNICAL CORRIGENDUM 1 Second
Edition
Welding ù Arc-welded joints in aluminium and its alloys ù Quality levels for imperfections Second Edition
Banking and Related Financial Services - Information Interchange - Collection Order Form First Edition; Technical Corrigendum 1:
12/15/1999
Banking and Related Financial Services - Information Interchange - Documentary Credit Form First Edition; Technical Corrigendum
1: 12/15/1999
Alpine Skis - Binding Mounting Area - Requirements for Test Screws First Edition
Aircraft - Methodology of Calculating Cargo Compartment Volumes First Edition
Textiles - Determination of Surface Burning Time of Fabrics First Edition; (CAN/CGSB-4.2 NO.27.11-94)
Aluminium Alloy Castings - Visual Method for Assessing the Porosity First Edition
Lubricants, industrial oils and related products (class L) Family T (Turbines) Specifications of triaryl phosphate ester turbine control
fluids (category ISO-L-TCD) First Edition
ISO
10051
Thermal Insulation - Moisture Effects on Heat Transfer - Determination of Thermal Transmissivity of a Moist Material First Edition
ISO
ISO
10052
10053
Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method First Edition
Acoustics - Measurement of Office Screen Sound Attenuation Under Specific Laboratory Conditions First Edition
ISO
ISO
10054
10055
ISO
ISO
10056
10058
ISO
ISO
ISO
ISO
ISO
10059-1
10059-2
10060
10062
10066
ISO
ISO
ISO
10068
10069 PT 1
10069 PT 2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10070
10071-1
10071-2
10072
10073
10074
10075
10075-2
ISO
10075-3
ISO
ISO
10076
10077-1
ISO
ISO
ISO
10077-2
10079-1
10079-2
ISO
10079-3
Internal Combustion Compression-Ignition Engines - Measurement Apparatus for Smoke from Engines Operating Under SteadyState Conditions - Filter-Type Smokemeter First Edition
Mechanical Vibration - Vibration Testing Requirements for Shipboard Equipment and Machinery Components First Edition
Mechanical Vibration - Measurement and Analysis of Whole-Body Vibration to Which Passengers and Crew are Exposed in Railway
Vehicles First Edition
Magnesites and Dolomites - Chemical Analysis First Edition (CEN EN ISO 10058: 1996)
Dense, Shaped Refractory Products - Determination of Cold Compressive Strength - Part 1: Referee Test Without Packing First
Edition
Dense, shaped refractory products - Determination of cold compressive strength - Part 2: Test with packing First Edition
Dense, Shaped Refractory Products - Test Methods for Products Containing Carbon First Edition
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) Second Edition
Flexible Cellular Polymeric Materials - Determination of Creep in Compression First Edition
Mechanical Vibration and Shock - Free, Mechanical Impedance of the Human Hand-Arm System at the Driving Point First Edition
Tools for Pressing - Elastomer Pressure Springs - Part 1: General Specification First Edition
Tools for Pressing - Elastomer Pressure Springs - Part 2: Specification of Accessories First Edition
Metallic Powders - Determination of Envelope-Specific Surface Area from Measurements of the Permeability to Air of a Powder Bed
Under Steady- State Flow Conditions First Edition
Tools for Pressing - Ball-Lock Punches - Part 1: Ball-Lock Punches for Light Duty First Edition
Tools for Pressing - Ball-Lock Punches - Part 2: Ball-lock punches for heavy duty First Edition
Tools for moulding Sprue bushes Dimensions Second Edition
Tools for Moulding - Support Pillars First Edition
Specification for Hard Anodic Oxidation Coatings on Aluminium and its Alloys First Edition
Ergonomic Principles Related to Mental Work- Load - General Terms and Definitions First Edition
Ergonomic Principles Related to Mental Workload - Part 2: Design Principles First Edition
Ergonomic principles related to mental workload Part 3: Principles and requirements concerning methods for measuring and
assessing mental workload First Edition
Metallic Powders - Determination of Particle Size Distribution by Gravitational Sedimentation in a Liquid and Attenuation
Measurement First Edition
Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 1: General Second Edition
Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 2: Numerical method for frames
First Edition
Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements Second Edition
Medical Suction Equipment - Part 2: Manually Powered Suction Equipment Second Edition
Medical Suction Equipment - Part 3: Suction Equipment Powered from Vacuum or Pressure Source Second Edition; Replaces ASTM
F 960 [Superseded: ASTM F 960]
ISO
ISO
10080
10081-1
Refractory Products - Classification of Dense, Shaped Acid-Resisting Products First Edition
Classification of dense shaped refractory products Part 1: Alumina-silica Second Edition; Replaces ISO 1109
ISO
10081-2
Classification of dense shaped refractory products Part 2: Basic products containing less than 7 % residual carbon First Edition
ISO
ISO
ISO
ISO
ISO
ISO
10081-3
10081-4
10082
10083
10084
10086-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10086-2
10087
10088
10089
10090
10093
10095
ISO
ISO
ISO
ISO
ISO
ISO
10096
10097-1
10097-2
10098
10099
10100
Classification of dense shaped refractory products Part 3: Basic products containing from 7 % to 50 % residual carbon First Edition
Classification of dense shaped refractory products ù Part 4: Special products First Edition
Plastics - Phenolic Resins - Classification and Test Methods Second Edition
Oxygen concentrator supply systems for use with medical gas pipeline systems Second Edition
Solid Fertilizers - Determination of Mineral -Acid-Soluble Sulfate Content - Gravimetric Method First Edition
Coal - Methods for Evaluating Flocculants for Use in Coal Preparation - Part 1: Basic Parameters First Edition
Coal Methods for evaluating flocculants for use in coal preparation Part 2: Flocculants as filter aids in rotary vacuum filtration
systems First Edition
Small craft - Craft identification - Coding system Third Edition
Small Craft - Permanently Installed Fuel Systems and Fixed Fuel Tanks Second Edition
Information Technology - 130 mm Rewritable Optical Disk Cartridge for Information Interchange First Edition
Information Technology - 90 mm Optical Disk Cartridges, Rewritable and Read Only, for Data Interchange First Edition
Plastics - Fire Tests - Standard Ignition Sources Second Edition
Coffee - Determination of Caffeine Content - Method Using High- Performance Liquid Chromatography First Edition
Aerospace - Nuts, Hexagonal, Slotted (Castellated), Red. Ht, Red. Across Flats, with MJ Threads, Cls: 450MPa (at Ambt T)/425 Dgs
C, 600MPa (at Ambt T)/235 Dgs. C, 600MPa (at Ambt T)/315 Dgs. C, 600 MPa (at Ambt T)/650 Dgs. C, 900 MPa (at Ambt T)/235
Dgs. C, 900MPa (at Ambt T)/730 Dgs. C, and 1100MPa (at Ambt T)/600 Dgs C - Dims. First Edition
Wireline Diamond Core Drilling Equipment - System A - Part 1: Metric Units First Edition
Wireline Diamond Core Drilling Equipment - System A - Part 2: Inch Units First Edition
Wireline Diamond Core Drilling Equipment - System CSSK First Edition
Pneumatic Fluid Power - Cylinders - Final Examination and Acceptance Criteria Second Edition
Hydraulic Fluid Power - Cylinders - Acceptance Test Second Edition
ISO
ISO
ISO
10101-1
10101-2
10101-3
ISO
10102
ISO
10103
Natural Gas - Determination of Water by the Karl Fischer Method - Part 1: Introduction First Edition; (Corrected and Reprinted 1995)
Natural Gas - Determination of Water by the Karl Fischer Method - Part 2: Titration Procedure First Edition
Natural Gas - Determination of Water by the Karl Fischer Method - Part 3: Coulometric Procedure First Edition
Assembly Tools for Screws and Nuts - Double-Headed Open-Ended Engineers Wrenches - Length of Wrenches and Thickness of
the Heads Second Edition
Assembly Tools for Screws and Nuts - Double-Headed, Flat and Offset, Box Wrenches - Length of Wrenches and Thickness of the
Heads Second Edition
ISO
ISO
10104
10106
ISO
10109-1
ISO
10109-4
ISO
10109-6
ISO
10109-7
ISO
10109-8
ISO
10109-11
ISO
ISO
10109-12
10110-1
ISO
10110-2
ISO
10110-3
ISO
10110-4
ISO
10110-5
ISO
10110-6
ISO
10110-7
ISO
10110-8
ISO
10110-9
ISO
10110-10
Assembly Tools for Screws and Nuts - Double-Headed, Deep Offset and Modified Offset, Box Wrenches - Length of Wrenches and
Thickness of the Heads Second Edition
Cork Stoppers - Determination of Global Migration First Edition
Optics and photonics - Environmental requirements - Part 1: General overview, terms and definitions, climatic zones and their
parameters Second Edition
Optics and Optical Instruments - Environmental Requirements - Part 4: Test Requirements for Telescopic Systems First Edition;
Corrected Version: 5/01/2002
Optics and photonics - Environmental requirements - Part 6: Test requirements for medical optical instruments Second Edition
Optics and Optical Instruments - Environmental Requirements - Part 7: Test Requirements for Optical Measuring Instruments First
Edition
Optics and photonics - Environmental requirements - Part 8: Test requirements for extreme conditions of use Second Edition
Optics and Optical Instruments - Environmental Requirements - Part 11: Optical Instruments for Outdoor Conditions of Use First
Edition
Optics and optical instruments Environmental requirements Part 12: Conditions of transport for optical instruments First Edition
Optics and photonics Preparation of drawings for optical elements and systems Part 1: General Second Edition
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 2: Material Imperfections - Stress
Birefringence First Edition
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 3: Material Imperfections Bubbles and Inclusions First Edition
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 4: Material Imperfections Inhomogeneity and Striae First Edition
Optics and photonics ù Preparation of drawings for optical elements and systems ù Part 5: Surface form tolerances Second Edition
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 6: Centring Tolerances First
Edition; Technical Corrigendum 1:04/01/1999
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 7: Surface Imperfection
Tolerances First Edition
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 8: Surface Texture First Edition
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 9: Surface Treatment and Coating
First Edition
Optics and photonics Preparation of drawings for optical elements and systems Part 10: Table representing data of optical elements
and cemented assemblies Second Edition
ISO
10110-11
ISO
10110-12
ISO
10110-14
ISO
10110-17
ISO
ISO
ISO
ISO
ISO
ISO
10111
10112
10113
10115
10116
10118-1
ISO
10118-2 CORR 2
ISO
10118-2 CORR 1
ISO
10118-2
ISO
ISO
10118-3 AMD 1
10118-3
ISO
ISO
ISO
ISO
10118-4
10119
10122
10123
ISO
ISO
ISO
10124
10126-1
10126-2
ISO
ISO
10129
10131-1
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 11: Non-Toleranced Data First
Edition; Corrigendum 1: 09/01/2006
Optics and photonics ù Preparation of drawings for optical elements and systems ù Part 12: Aspheric surfaces Second edition
Optics and photonics ù Preparation of drawings for optical elements and systems ù Part 14: Wavefront deformation tolerance Second
edition
Optics and photonics Preparation of drawings for optical elements and systems Part 17: Laser irradiation damage threshold First
edition
Metallic and Other Inorganic Coatings - Measurement of Mass Per Unit Area - Review of Gravimetric and Chemical Analysis Methods
First Edition
Damping Materials - Graphical Presentation of the Complex Modulus First Edition
Metallic materials Sheet and strip Determination of plastic strain ratio Second Edition
Oil of Tarragon (Artemisia Dracunculus L.), French Type First Edition
Information technology Security techniques Modes of operation for an n-bit block cipher Third Edition
Information Technology - Security Techniques - Hash-Functions - Part 1: General Second Edition
Information technology ù Security techniques ù Hash-functions ù Part 2: Hash-functions using an n-bit block cipher TECHNICAL
CORRIGENDUM 2
Information technology ù Security techniques ù Hash-functions ù Part 2: Hash-functions using an n-bit block cipher TECHNICAL
CORRIGENDUM 1 Second Edition
Information technology ù Security techniques ù Hash-functions ù Part 2: Hash-functions using an n-bit block cipher Second Edition
Information technology ù Security techniques ù Hash-functions ù Part 3: Dedicated hash-functions AMENDMENT 1: Dedicated HashFunction 8 (SHA-224) Third Edition
Information technology ù Security techniques ù Hash-functions ù Part 3: Dedicated hash-functions Third Edition
Information Technology - Security Techniques - Hash-Functions - Part 4: Hash-Functions Using Modular Arithmetic First Edition
Carbon Fibre - Determination of Density Second Edition
Reinforcement Materials - Tubular Braided Sleeves - Basis for a Specification First Edition
Adhesives - Determination of Shear Strength of Anaerobic Adhesives Using Pin-and-Collar Specimens First Edition
Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for Pressure Purposes - Ultrasonic Testing for the Detection of
Laminar Imperfections First Edition
Banking - Procedures for Message Encipherment (Wholesale) - Part 1: General Principles First Edition
Banking - Procedures for Message Encipherment (Wholesale) - Part 2: DEA Algorithm First Edition
Plain bearings Testing of bearing metals Resistance to corrosion by lubricants under static conditions First Edition; Supersedes
ISO/TR 10129: 1993
Foldaway Beds - Safety Requirements and Tests - Part 1: Safety Requirements First Edition
ISO
ISO
ISO
ISO
ISO
10131-2
10132
10133
10134
10135
ISO
10136-1
ISO
10136-2
ISO
10136-3
ISO
10136-4
ISO
10136-5
ISO
ISO
10136-6
10137
ISO
10138
ISO
ISO
ISO
10139-1 CORR 1
10139-1
10139-2
ISO
10142
ISO
ISO
ISO
ISO
ISO
10143
10144
10145-1
10145-2
10146
ISO
ISO
ISO
10147
10149
10153
Foldaway Beds - Safety Requirements and Tests - Part 2: Test Methods First Edition
Textiles - Textured Filament Yarn - Definitions First Edition
Small Craft - Electrical Systems - Extra-Low-Voltage d.c. Installations Second Edition
Small Craft - Electrical Devices - Lightning-Protection Systems Second Edition
Technical Drawings - Simplified Representation of Moulded, Cast and Forged Parts First Edition
Glass and Glassware - Analysis of Extract Solutions - Part 1: Determination of Silicon Dioxide by Molecular Absorption Spectrometry
First Edition
Glass and Glassware - Analysis of Extract Solutions - Part 2: Determination of Sodium Oxide and Potassium Oxide by Flame
Spectrometric Methods First Edition
Glass and Glassware - Analysis of Extract Solutions - Part 3: Determination of Calcium Oxide and Magnesium Oxide by Flame
Atomic Absorption Spectrometry First Edition
Glass and Glassware - Analysis of Extract Solutions - Part 4: Determination of Aluminium Oxide by Molecular Absorption
Spectrometry First Edition
Glass and Glassware - Analysis of Extract Solutions - Part 5: Determination of Iron(III) Oxide by Molecular Absorption Spectrometry
and Flame Atomic Absorption Spectrometry First Edition
Glass and Glassware - Analysis of Extract Solutions - Part 6: Determination of Boron(III) Oxide by Molecular Absorption Spectrometry
First Edition
Bases for Design of Structures - Serviceability of Buildings Against Vibration First Edition
Steel and Iron - Determination of Chromium Content - Flame Atomic Absorption Spectrometric Method First Edition (AS/NZS
1050.39: 1994)
Dentistry ù Soft lining materials for removable dentures ù Part 1 Materials for short-term use TECHNICAL CORRIGENDUM 1 Second
Edition
Dentistry ù Soft lining materials for removable dentures ù Part 1: Materials for short-term use Second Edition
Dentistry - Soft Lining Materials for Removable Dentures - Part 2: Materials for Long-Term Use First Edition
Carbonaceous Materials for Use in the Production of Aluminium - Calcined Coke - Determination of Grain Stability Using a Laboratory
Vibration Mill First Edition
Carbonaceous Materials for the Production of Aluminium - Calcined Coke for Electrodes - Determination of the Electrical Resistivity
of Granules First Edition
Certification Scheme for Steel Bars and Wires for the Reinforcement of Concrete Structures First Edition
End Mills with Brazed Helical Hardmetal Tips - Part 1: Dimensions of End Mills with Parallel Shank First Edition
End Mills with Brazed Helical Hardmetal Tips - Part 2: Dimensions of End Mills with 7/24 Taper Shank First Edition
Crosslinked Polyethylene (PE-X) Pipes - Effect of Time and Temperature on the Expected Strength First Edition
Pipes and Fittings Made of Crosslinked Polyethylene (PE-X) - Estimation of the Degree of Crosslinking by Determination of the Gel
Content Second Edition
Information Technology - Data Interchange on Read-Only 120 mm Optical Data Disks (CD-ROM) Second Edition
Steel - Determination of Boron Content - Curcumin Spectrophotometric Method Second Edition
ISO
10154
Light Gauge Metal Containers - Three-Piece Necked-in Tinplate Aerosol Cans - Dimensions of the Top End First Edition
Stationary Source Emissions - Automated Monitoring of Mass Concentrations of Particles - Performance Characteristics, Test
Methods and Specifications First Edition Corrigendum 1: 02/15/2002
Gases and Gas Mixtures - Determination of Fire Potential and Oxidizing Ability for the Selection of Cylinder Valve Outlets Second
Edition
Gas cylinders Gases and gas mixtures Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures First
Edition; Together with ISO 10156-1 Supersedes ISO 10156:1996
Photography - Flash Exposure Meter - Requirements First Edition; (Corrected and Reprinted - 1991)
Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Service Definition Second Edition;
Amendment 1: 11/01/2002
Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 1:
Protocol Specification Second Edition; Amendment 1: 11/01/2002; Amendment 2: 11/01/2002
Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 2:
Protocol Implementation Conformance Statement (PICS) Proforma First Edition
ISO
10155
ISO
10156
ISO
ISO
10156-2
10157
ISO
10160
ISO
10161-1
ISO
10161-2
ISO
10164-1
ISO
10164-2
ISO
10164-3
ISO
10164-4
ISO
10164-5
Information Technology - Open Systems Interconnection - Systems Management: Attributes for Representing Relationships First
Edition; CCITT RECMN X.733; CAN/CSA-ISO/IEC-10164-3-95; Amendment 1 - 05/15/1996; Corrigendum 1 - 12/15/1996
Information Technology - Open Systems Interconnection - Systems Management: Alarm Reporting Function First Edition; CCITT
RECMN X.733; Corrigendum 1-12/15/1996; AS/NZS 4152.4: 1994; Amendment 1- 12/15/1995; CAN/CSA-ISO/IEC 10164-4-95;
Corrigendum 1-09/01/1994; Corrigendum 1-12/15/1996; Technical Corrigendum 2-12/15/1999
Information Technology - Open Systems Interconnection - Systems Management: Event Report Management Function First Edition;
CCITT RECMN X.734; Corrigendum 1-12/15/1996; AS/NZS 4152.5: 1994; Amendment 1-12/15/1995; Technical Corrigendum 212/15/1999
ISO
10164-6
Information Technology - Open Systems Interconnection - Systems Management: Log Control Function First Edition; CAN/CSAISO/IEC 10164-6-95; Amendment 1: 05/15/1996; Corrigendum 1: 12/15/1996; Technical Corrigendum 1: 03/01/2003
ISO
10164-7
Information Technology - Open Systems Interconnection - Systems Management: Security Alarm Reporting Function First Edition;
CCITT RECMN X.736; AS/NZS 4152.7: 1993; Amendment 1-1995; CAN/CSA-ISO/IEC 10164-7-95; Corrigendum 1-1996
Information Technology - Open Systems Interconnection - Systems Management: Object Management Function First Edition; CCITT
RECMN X.730; AS/NZS 4152.1: 1994; CAN/CSA-ISO/IEC-10164-1-95; Amendment 1-1996; Corrigendum 1-1996
Information Technology - Open Systems Interconnection - Systems Management: State Management Function Amendment 2:
Amendment to Support Lifecycle State First Edition; CCITT RECMN X.731; AS/NZS 4152.2: 1994; CAN/CSA-ISO/IEC-10164-2-95;
Amendment 1-1996; Corrigendum 1-1996; Amendment 2: 03/01/2002; Corrigendum 2: 4/15/2002
ISO
10164-8
Information Technology - Open Systems Interconnection - Systems Management: Security Audit Trail Function First Edition;
Technical Corrigendum 1: 12/15/1995; Technical Corrigendum 2: 12/15/1996; Technical Corrigendum 3: 11/01/1999
ISO
10164-9
Information Technology - Open Systems Interconnection - Systems Management: Objects and Attributes for Access Control First
Edition; Technical Corrigendum 1: 12-15-1996; Technical Corrigendum 2: 11-01-1999; Technical Corrigendum 3: 04/15/2002
ISO
10164-10
ISO
10164-11
ISO
10164-12
ISO
10164-13
ISO
ISO
10164-14
10164-15
ISO
10164-16
ISO
10164-17
ISO
10164-18
ISO
10164-19
ISO
10164-20
ISO
10164-21
ISO
10164-22
ISO
10165-1
Information Technology - Open Systems Interconnection - Systems Management: Usage Metering Function for Accounting Purposes
First Edition; Amendment 1: 12-15-1998; Technical Corrigendum 1: 11-01-1999; Technical Corrigendum 2: 4/15/2002
Information Technology - Open Systems Interconnection - Systems Management: Metric Objects and Attributes First Edition;
Amendment 1: 12-15-1998; Technical Corrigendum 1: 11-01-1999
Information Technology - Open Systems Interconnection - Systems Management: Test Management Function First Edition; Technical
Corrigendum 1: 10-15-1998; Technical Corrigendum 2: 11-01-1999; Technical Corrigendum 3: 4/15/2002
Information Technology - Open Systems Interconnection - Systems Management: Summarization Function First Edition; Amendment
1 04-01-97; Corrigendum 1: 11-15-99; Corrigendum 2: 04-15-2002
Information Technology - Open Systems Interconnection - Systems Management: Confidence and Diagnostic Test Categories First
Edition; Technical Corrigendum 1:12/15/1999; Technical Corrigendum 2: 4/15/2002; Technical Corrigendum 3: 4/15/2002
Information technology Open Systems Interconnection Systems management: Scheduling function Second Edition
Information Technology - Open Systems Interconnection - Systems Management: Management Knowledge Management Function
First Edition; Amendment 1:12/15/1998; Corrigendum 1: 02/01/2002
Information Technology - Open Systems Interconnection - Systems Management: Change over Function First Edition; ITU-T
Rec.X.751 1995; Technical Corrigendum 1 06/15/1999; Technical Corrigendum 2: 02/01/2002
Information Technology - Open Systems Interconnection - Systems Management: Software Management Function First Edition; ITUT Rec.X.744 1996; Technical Corrigendum 1 06/15/1999; Technical Corrigendum 2: 03/01/2002; Technical Corrigendum 3:
03/01/2002
Information Technology - Open Systems Interconnection - Systems Management: Management Domain and Management Policy
Management Function First Edition
Information Technology - Open Systems Interconnection - Systems Management: Time Management Function First Edition; ITU-T
Rec.X.743 1998; Technical Corrigendum 1: 02/01/2002
Information Technology - Open Systems Interconnection - Systems Management: Command Sequencer for Systems Management
First Edition
Information Technology - Open Systems Interconnection - Systems Management: Response Time Monitoring Function First Edition
Information Technology - Open Systems Interconnection - Structure of Management Information: Management Information Model
First Edition; (Corrigendum 1-1994) (AS/NZS 4151.1: 1994) (Amendment 1-1996)
Information Technology - Open Systems Interconnection - Structure of Management Information: Definition of Management
Information First Edition; Technical Corrigendum 1: 09-01-1994; Technical Corrigendum 2: 12-15-1996; Technical Corrigendum 3: 1015-1999
Information Technology - Open Systems Interconnection - Structure of Management Information: Definition of Management
Information Amendment 1: States to Support Lifecycle 2003
Information Technology - Open Systems Interconnection - Structure of Management Information: Definition of Management
Information Amendment 2: Enhanced Event Control 1996
Information Technology - Open Systems Interconnection - Structure of Management Information: Guidelines for the Definition of
Managed Objects First Edition; Amendment 1: 08/01/1996; Corrigendum 1: 12/15/1996; Amendment 2: 12/15/1998 and Amendment
3: 12/15/1998; Corrigendum 2: 2/01/2003
Information Technology - Open Systems Interconnection - Structure of Management Information: Guidelines for the Definition of
Managed Objects Amendment 4: GDMO+: Specifying the Behaviour of Managed Objects 1997
Information Technology - Open Systems Interconnection - Structure of Management Information: Generic Management Information
First Edition; Corrigendum 1: 12/15/1998; Corrigendum 2: 4/15/2002
Information Technology - Open Systems Interconnection - Structure of Management Information: Requirements and Guidelines for
Implementation Conformance Statement Proformas Associated with OSI Management Second Edition
Information Technology - Open Systems Interconnection - Structure of Management Information: General Relationship Model First
Edition
Information Technology - Open Systems Interconnection - Structure of Management Information: Managed Objects for Supporting
Upper Layers First Edition
Information Technology - Open Systems Interconnection - Structure of Management Information: Systems Management Application
Layer Managed Objects First Edition
Information Technology - Text and Office Systems - Document Filing and Retrieval (DFR) - Part 1: Abstract Service Definition and
Procedures First Edition; Corrigendum 1-1994; Corrigendum 2-1994; Corrigendum 3-1994; Corrigendum 4-1998; Amendment 11995; Amendment 2-1996
ISO
10165-2
ISO
10165-2 DAM 1
ISO
10165-2 DAM 2
ISO
ISO
10165-4
10165-4 DRAFT
AMD 4
ISO
10165-5
ISO
10165-6
ISO
10165-7
ISO
10165-8
ISO
10165-9
ISO
10166-1
ISO
10166-2
ISO
10173
ISO
10175-1
Information Technology - Text and Office Systems - Document Filing and Retrieval (DFR) - Part 2: Protocol Specification First Edition;
(Corrigendum 1-1994) (Corrigendum 2-1995) (Amendment 1-1995) (AS/NZS 4167.2: 1994) (Amendment 2-1996)
Information Technology - Telecommunications and Information Exchange between Systems - Interface Connector and Contact
Assignments for ISDN Primary Rate Access Connector Located at Reference Points S and T Second Edition
Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 1: Abstract Service Definition and
Procedures First Edition; Technical Corrigendum 1: 07/01/1998; Technical Corrigendum 2: 11/15/1998; Technical Corrigendum 3:
12/01/1998; Technical Corrigendum 4: 12/01/1998
ISO
10175-2
Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 2: Protocol Specification First Edition
ISO
10175-3
ISO
10177
ISO
10179
ISO
ISO
10180
10181-1
ISO
10181-2
ISO
10181-3
ISO
10181-4
ISO
10181-5
ISO
10181-6
ISO
ISO
ISO
ISO
ISO
10181-7
10185
10190
10191
10192-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10193
10196
10197
10198
10203
10204
10206
ISO
10207
Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 3: Management Abstract Service
Definitions and Procedures First Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Provision of the Connection-Mode
Network Internal Layer Service by Intermediate Systems Using ISO/IEC 8208, the X.25 Packet Layer Protocol First Edition; AS/NZS
4217: 1994
Information Technology - Processing Languages - Document Style Semantics and Specification Language (DSSSL) First Edition;
Corrigendum 1: 03-01-2001; Amendment 1: 10-01-2003; Amendment 2: 08-15-2005
Information Technology - Processing Languages - Standard Page Description Language (SPDL) First Edition; Corrigendum 1:
10/15/2001
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Overview First Edition
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Authentication Framework First
Edition
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Access Control Framework First
Edition
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Non-Repudiation Framework
First Edition
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Confidentiality Framework First
Edition
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Integrity Framework First Edition
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Security Audit and Alarms
Framework First Edition
Tobacco and Tobacco Products - Vocabulary Tabac et produits du tabac Vocabulaire Second Edition
Motor Cycle Chains - Characteristics and Test Methods First Edition
Passenger Car Tyres - Verifying Tyre Capabilities - Laboratory Test Methods Second Edition; Amendment 1: 09/01/1998
Information Technology - Home Electronic System (HES) Interfaces Part 1: Universal Interface (UI) Class 1 First edition
General Use Light Gauge Metal Containers - Nominal Filling Volumes of Round Cylindrical and Tapered Containers of up to 40 000
ml First Edition Cancels and Replaces Both ISO/TR 10193: 1989 and ISO 11944:1993
Document Imaging Applications - Recommendations for the Creation of Original Documents Second Edition
Micrographics - Reader-Printers for Transparent Microforms - Characteristics First Edition
Micrographics - Rotary Camera for 16 mm Microfilm - Mechanical and Optical Characteristics First Edition
Iron Ores - Determination of Calcium - Flame Atomic Absorption Spectrometric Method Second Edition
Iron Ores - Determination of Magnesium - Flame Atomic Absorption Spectrometric Method Second Edition
Information Technology - Programming Languages - Extended Pascal First Edition
Rock Drilling Equipment - Rope Threaded Drill Steel Equipment for Percussive Drilling, Nominal Sizes 22 mm to 38 mm First Edition;
Corrigendum 1: 1991
ISO
10208
ISO
10209-1
ISO
10209-2
ISO
10209-4
ISO
10211-1
ISO
ISO
10211-2
10213
ISO
10215
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10216
10218-1 CORR 1
10218-1
10223
10226
10227
10228
ISO
ISO
ISO
10229
10230
10231
ISO
10236
ISO
10237
ISO
ISO
ISO
ISO
10238
10239
10240
10241
Rock Drilling Equipment - Left-Hand Rope Threads First Edition
Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of Drawings First
Edition;
Technical Product Documentation - Vocabulary - Part 2: Terms Relating to Projection Methods First Edition; (Corrected and
Reprinted - 1994) (CEN EN ISO 10209-2: 1996)
Technical Product Documentation - Vocabulary - Part 4: Terms Relating to Construction Documentation Documentation Technique
De Produit - Vocabulaire - Parte 4: Termes Relatifs A La Documentation Des Constructions First Edition
Thermal Bridges in Building Construction - Heat Flows and Surface Temperatures - Part 1: General Calculation Methods First Edition
(CEN EN ISO 10211-1: 1995) Technical Corrigendum: 5/01/2002
Thermal Bridges in Building Construction - Calculation of Heat Flows and Surface Temperatures - Part 2: Linear Thermal Bridges
First Edition
Aluminium Ores - Determination of Total Iron Content - Titanium Trichloride Reduction Method First Edition
Anodized Aluminium and Aluminium Alloys - Visual Determination of Image Clarity of Anodic Oxidation Coatings - Chart Scale
Method First Edition
Anodized Aluminium and Aluminium Alloys - Instrumental Determination of Image Clarity of Anodic Oxidation Coatings - Instrumental
Method First Edition
Robots for industrial environments ù Safety requirements ù Part 1: Robot TECHNICAL CORRIGENDUM 1 First Edition
Robots for industrial environments Safety requirements Part 1: Robot First Edition; Supersedes ISO 10218:1992
Textile machinery and accessories Flat warp knitting machines Numbering of guide bars Second Edition
Aluminium Ores - Experimental Methods for Checking the Bias of Sampling First Edition
Human/Human Surrogate Impact (Single Shock) Testing and Evaluation - Guidance on Technical Aspects First Edition
Cross-Country Skis - Binding Mounting Area - Requirements for Test Screws First Edition
Water Quality - Determination of the Prolonged Toxicity of Substances to Freshwater Fish - Method for Evaluating the Effects of
Substances on the Growth Rate of Rainbow Trout (Oncorhynchus Mykiss Walbaum (Teleostei, Salmonidae) First Edition
Cycles - Splined Hub and Sprocket - Mating Dimensions First Edition
Motorcycle tyres Test methods for verifying tyre capabilities Third edition
Carbonaceous Materials for the Production of Aluminium - Green Coke and Calcined Coke for Electrodes - Determination of Bulk
Density (Tapped) First Edition
Carbonaceous Materials for Use in the Production of Aluminium - Calcined Coke - Determination of Residual-Hydrogen Content First
Edition
Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Determination of Sulfur Content by an
Instrumental Method First Edition
Small Craft - Liquefied Petroleum Gas (LPG) Systems First Edition; Technical Corrigendum 1: 07/15/2001
Small Craft - Owner s Manual Second Edition
International Terminology Standards - Preparation and Layout First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10242-1
10242-2
10242-3
10243
10245-1
10245-2
10245-3
10245-4 CORR 1
10245-4
10245-5
10247
10248
10249
10251
ISO
ISO
ISO
ISO
10253
10254
10256
10258
ISO
ISO
10260
10261
ISO
ISO
ISO
10262
10263-1
10263-2
ISO
10263-3
ISO
10263-4
ISO
10263-5
ISO
ISO
10263-6
10264
Tools for Pressing - Punch Holder Shanks - Part 1: Type A Second Edition
Tools for Pressing - Punch Holder Shanks - Part 2: Type C First Edition
Tools for Pressing - Punch Holder Shanks - Part 3: Type D First Edition
Tools for Pressing - Compression Springs with Rectangular Section - Housing Dimensions and Colour Coding First Edition
Cranes - Limiting and Indicating Devices - Part 1: General First Edition
Cranes - Limiting and Indicating Devices - Part 2: Mobile Cranes First Edition
Cranes - Limiting and Indicating Devices - Part 3: Tower Cranes First Edition
Cranes ù Limiting and indicating devices Part 4: Jib cranes TECHNICAL CORRIGENDUM 1 First Edition
Cranes ù Limiting and indicating devices ù Part 4: Jib cranes First Edition
Cranes - Limiting and Indicating Devices - Part 5: Overhead Travelling and Portal Bridge Cranes First Edition
Conveyor belts - Characteristics of covers - Classification First Edition; Amendment 1: 01/15/2006
Fluid Fertilizers - De-Aeration of Suspension Samples by Film Disentrainment First Edition
Fluid Fertilizers - Preliminary Visual Examination and Preparation of Samples for Physical Testing First Edition
Copper, lead, zinc and nickel concentrates Determination of mass loss of bulk material on drying Second Edition
Water Quality - Marine Algal Growth Inhibition Test with Skeletonema Costatum and Phaeodactylum Tricornutum Second Edition
Air Cargo and Ground Equipment - Vocabulary First Edition
Head and face protection for use in ice hockey Second Edition;
Copper Sulfide Concentrates - Determination of Copper Content - Titrimetric Methods First Edition
Water Quality - Measurement of Biochemical Parameters - Spectrometric Determination of the Chlorophyll-a Concentration First
Edition
Earth-Moving Machinery - Product Identification Numbering System Second Edition
Earth-Moving Machinery - Hydraulic Excavators - Laboratory Tests and Perfomance Requirements for Operator Protective Guards
First Edition
Earth-Moving Machinery - Operator Enclosure Environment - Part 1: General and Definitions First Edition
Earth-Moving Machinery - Operator Enclosure Environment - Part 2: Air Filter Test First Edition
Earth-Moving Machinery - Operator Enclosure Environment - Part 3: Operator Enclosure Pressurization Test Method First Edition
Earth-Moving Machinery - Operator Enclosure Environment - Part 4: Operator Enclosure Ventilation, Heating and/or Air-Conditioning
Test Method First Edition
Earth-Moving Machinery - Operator Enclosure Environment - Part 5: Windscreen Defrosting System Test Method First Edition
Earth-Moving Machinery - Operator Enclosure Environment - Part 6: Determination of Effect of Solar Heating on Operator Enclosure
First Edition
Earth-Moving Machinery - Key-Locked Starting Systems First Edition
ISO
10265
Earth-Moving Machinery - Crawler Machines - Performance Requirements and Test Procedures for Braking Systems First Edition
ISO
ISO
10266
10268
ISO
ISO
10270
10271
ISO
10272-1
ISO
ISO
ISO
10273
10275
10277
Earth-Moving Machinery - Determination of Slope Limits for Machine Fluid Systems Operation - Static Test Method First Edition
Earth-Moving Machinery - Retarders for Dumpers and Tractor-Scrapers - Performance Tests First Edition
Corrosion of Metals and Alloys - Aqueous Corrosion Testing of Zirconium Alloys for Use in Nuclear Power Reactors First Edition;
Corrigendum 1 07-15-1997
Dental Metallic Materials - Corrosion Test Methods First Edition; Corrigendum 1: 1/15/2005
Microbiology of food and animal feeding stuffs Horizontal method for detection and enumeration of Campylobacter spp. Part 1:
Detection method First Edition; Together with ISO TS 10272-2:2006 replaces ISO 10272:1995
Microbiology of food and animal feeding stuffs Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica
Second Edition
Metallic materials ù Sheet and strip ù Determination of tensile strain hardening exponent Second Edition
Aluminium Ores Experimental Methods for Checking the Precision of Sampling First Edition
ISO
ISO
10278
10279
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10280
10282 CORR 1
10282
10283
10284
10285
10286
ISO
ISO
10289
10290
ISO
ISO
10291
10292
ISO
ISO
10293
10294-1
Steel - Determination of Manganese Content - Inductively Coupled Plasma Atomic Emission Spectrometric Method First Edition
Information Technology - Programming Languages - Full BASIC First Edition; (Amendment 1-1994)
Steel and Iron - Determination of Titanium Content - Diantipyrylmethane Spectrophotometric Method First Edition (CEN EN ISO
10280: 1995)
Single-use sterile rubber surgical gloves ù Specification TECHNICAL CORRIGENDUM 1 Second Edition
Single-Use Sterile Surgical Rubber Gloves - Specification Second Edition
Binders for paints and varnishes ù Determination of monomeric diisocyanates in isocyanate resins Second Edition
Cinematography - Graphical Symbols - Description First Edition
Rolling Bearings, Linear Motion, Recirculating Ball, Sleeve Type - Metric Series First Edition
Gas Cylinders - Terminology Bouteilles A Gaz - Terminologie Third Edition
Methods for Corrosion Testing of Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test Specimens and
Manufactured Articles Subjected to Corrosion Tests First Edition; Cancels and Replaces ISO 1462: 1973, ISO 4540: 1980 and ISO
8403: 1991
Textiles - Cotton Yarns - Specifications First Edition
Glass in Building - Determination of Steady-State U Values (Thermal Transmittance) of Multiple Glazing - Guarded Hot Plate Method
First Edition
Glass in Building - Calculation of Steady-State U Values (Thermal Transmittance) of Multiple Glazing First Edition
Glass in Building - Determination of Steady-State U Values (Thermal Transmittance) of Multiple Glazing - Heat Flow Meter Method
First Edition
Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 1: Test Method First Edition
ISO
ISO
10294-2
10294-3
Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 2: Classification, Criteria and Field of Application of Test
Results First Edition
Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 3: Guidance on the Test Method First Edition
ISO
ISO
10294-4
10294-5
Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 4: Test of Thermal Release Mechanism First Edition
Fire resistance tests - Fire dampers for air distribution systems - Part 5: Intumescent fire dampers First edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10295-1
10296
10297
10298
10299
10300-1
10300-2
Fire tests for building elements and components ù Fire testing of service installations ù Part 1: Penetration seals First Edition
Aircraft - Hybrid Remote Power Controllers - General Requirements First Edition
Transportable gas cylinders - Cylinder valves - Specification and type testing Second Edition
Determination of Toxicity of a Gas or Gas Mixture First Edition
Aerospace - Rivets, Solid - Material and Metric Series Identification First Edition
Calculation of Load Capacity of Bevel Gears - Part 1: Introduction and General Influence Factors First Edition
Calculation of Load Capacity of Bevel Gears - Part 2: Calculation of Surface Durability Corrected Version; 5/15/2003
ISO
ISO
ISO
10300-3
10301
10302
ISO
10303-1
ISO
10303-11
ISO
10303-14
ISO
10303-21
ISO
10303-22
ISO
10303-23
ISO
10303-24
ISO
10303-31
ISO
10303-32
Calculation of Load Capacity of Bevel Gears - Part 3: Calculation of Tooth Root Strength First Edition; Corrected Version 6/15/2003
Water Quality - Determination of Highly Volatile Halogenated Hyrdrocarbons - Gas-Chromatographic Methods First Edition
Acoustics - Method for the Measurement of Airborne Noise Emitted by Small Air-Moving Devices First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1: Overview and Fundamental
Principles First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 11: Description Methods: the
EXPRESS Language Reference Manual Second Edition
Industrial automation systems and integration Product data representation and exchange Part 14: Description methods: The
EXPRESS-X language reference manual First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 21: Implementation Methods:
Clear Text Encoding of the Exchange Structure Second Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 22: Implementation Methods:
Standard Data Access Interface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 23: Implementation Methods: C++
Language Binding to the Standard Data Access Interface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 24: Implementation Methods: C
Language Binding of Standard Data Access Interface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 31: Conformance Testing
Methodology and Framework: General Concepts First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 32: Conformance Testing
Methodology and Framework: Requirements on Testing Laboratories and Clients First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 34: Conformance Testing
Methodology and Framework: Abstract Test Methods for Application Protocol Implementations First Edition
Industrial automation systems and integration Product data representation and exchange Part 41: Integrated generic resource:
10303-41
Fundamentals of product description and support Third Edition
Industrial automation systems and integration - Product data representation and exchange - Part 42: Integrated generic resource:
10303-42 CORR 1 Geometric and topological representation, TECHNICAL CORRIGENDUM 1 Third Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 42: Integrated Generic Resource:
10303-42
Geometric and Topological Representation Third Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 43: Integrated Generic
10303-43
Resources: Representation Structures Technical Corrigendum 2 04/01/2000
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 43: Integrated Generic Resource:
10303-43
Representation Structures Second Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 44: Integrated Generic
10303-44
Resources: Product Structure Configuration First Edition; Technical Corrigendum 1: 03-15-1999
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 44: Integrated Generic Resource:
10303-44
Product Structure Configuration Second Edition; Technical Corrigendum 1: 03-15-2001
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 45: Integrated Generic Resource:
10303-45
Materials First Edition; Technical Corrigendum 1: 03-15-1999
Industrial automation systems and integration - Product data representation and exchange - Part 45: Integrated generic resource:
DIS 10303-45
Material and other engineering properties
10303-34
Industrial automation systems and integration Product data representation and exchange Part 46: Integrated generic resources:
Visual presentation First Edition; Corrigendum 1: 07/15/1999; Corrigendum 2: 5/15/2002; Corrigendum 3: 08/01/2006
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 47: Integrated Generic Resource:
10303-47
Shape Variation Tolerances First Edition; Technical Corrigendum 1: 10/15/2000
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 49: Integrated Generic
10303-49
Resources: Process Structure and Properties First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 50: Integrated Generic
10303-50
Resources: Mathematical Constructs First Edition
Industrial automation systems and integration ù Product data representation and exchange ù Part 55: Integrated generic resource:
10303-55 CORR 1 Procedural and hybrid representation TECHNICAL CORRIGENDUM 1 First Edition
Industrial automation systems ù Product data representation and exchange ù Part 55: Integrated generic resource: Procedural and
10303-55
hybrid representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 101: Intergrated Application
10303-101
Resources: Draughting First Edition; Corrigendum 1: 04/15/1999
10303-46
ISO
10303-104
ISO
10303-105
ISO
10303-108
ISO
10303-109
ISO
10303-111
ISO
10303-112
ISO
10303-201
ISO
10303-202
ISO
10303-203
ISO
10303-204
ISO
10303-207
ISO
10303-209
ISO
10303-210
ISO
10303-212
ISO
10303-214
ISO
10303-215
ISO
10303-216
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 104: Integrated Application
Resource: Finite Element Analysis First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 105: Integrated Application
Resource: Kinematics First Edition; Technical Corrigendum 1:03/01/2000; Technical Corrigendum 2: 10/15/2000
Industrial automation systems and integration Product data representation and exchange Part 108: Integrated application resource:
Parameterization and constraints for explicit geometric product models First Edition
Industrial automation systems and integration Product data representation and exchange Part 109: Integrated application resource:
Kinematic and geometric constraints for assembly models First Edition
Industrial automation systems and integration ù Product data representation and exchange ù Part 111: Integrated application
resource: Elements for the procedural modelling of solid shapes First Edition
Industrial automation systems and integration Product data representation and exchange Part 112: Integrated application resource:
Modelling commands for the exchange of procedurally represented 2D CAD models First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 201: Application Protocol: Explicit
Draughting First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 202: Application Protocol:
Associative Draughting First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 203: Application Protocol:
Configuration Controlled Design First Edition; Technical Corrigendum 1: 03/15/1995; Technical Corrigendum 2: 12/15/1998;
Amendment 1: 11/01/2000; Technical Corrigendum 3: 02/15/2004
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 204: Application Protocol:
Mechanical Design Using Boundary Representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 207: Application Protocol: Sheet
Metal Die Planning and Design First Edition; Technical Corrigendum 1: 03-01-2001
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 209: Application Protocol:
Composite and Metallic Structural Analysis and Related Design First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 210: Application Protocol:
Electronic Assembly, Interconnection, and Packaging Design First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 212: Application Protocol:
Electrotechnical Design and Installation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 214: Application Protocol: Core
Data for Automotive Mechanical Design Processes Second Edition
Industrial automation systems and integration Product data representation and exchange Part 215: Application protocol: Ship
arrangement First Edition
Industrial automation systems and integration Product data representation and exchange Part 216: Application protocol: Ship
moulded forms First Edition
ISO
10303-218
ISO
10303-224
ISO
10303-225
ISO
10303-227
ISO
10303-232
ISO
10303-238
ISO
10303-240
ISO
10303-501
ISO
10303-502
ISO
10303-503
ISO
10303-504
ISO
10303-505
ISO
10303-506
ISO
10303-507
ISO
10303-508
ISO
10303-509
ISO
10303-510
ISO
10303-511
Industrial automation systems and integration Product data representation and exchange Part 218: Application protocol: Ship
structures First Edition
Industrial automation systems and integration Product data representation and exchange Part 224: Application protocol: Mechanical
product definition for process planning using machining feature Third Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 225: Application Protocol: Building
Elements Using Explicit Shape Representation First Edition
Industrial automation systems and integration - Product data representation and exchange - Part 227: Application protocol: Plant
spatial configuration Second Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 232: Application Protocol:
Tehcnical Data Packaging Core Information and Exchange First Edition
Industrial automation systems and integration ù Product data representation and exchange ù Part 238: Application protocol:
Application interpreted model for computerized numerical controllers First Edition
Industrial automation systems and integration Product data representation and exchange Part 240: Application protocol: Process
plans for machined products First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 501: Application Interpreted
Construct: Edge-Based Wireframe First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 502: Application Interpreted
Construct: Shell-Based Wireframe First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 503: Application Interpreted
Construct: Geometrically Bounded 2D Wireframe First Edition; Technical Corrigendum 1: 12/1/2006
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 504: Application Interpreted
Construct: Draughting Annotation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 505: Application Interpreted
Construct: Drawing Structure and Administration First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 506: Application Interpreted
Construct: Draughting Elements First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 507: Application Interpreted
Construct: Geometrically Bounded Surface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 508: Application Interpreted
Construct: Non-Manifold Surface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 509: Application Interpreted
Construct: Manifold Surface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 510: Application Interpreted
Construct: Geometrically Bounded Wireframe First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 511: Application Interpreted
Construct: Topologically Bounded Surface First Edition
ISO
10303-512
ISO
10303-513
ISO
10303-514
ISO
10303-515
ISO
10303-517
ISO
10303-518
ISO
10303-519
ISO
10303-520
ISO
10303-521
ISO
10303-522
ISO
10303-523
ISO
10304-1
ISO
10304-3
ISO
ISO
10304-4
10306
ISO
10307-1
ISO
ISO
ISO
ISO
10307-2
10308
10309
10310
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 512: Application Interpreted
Construct: Faceted Boundary Representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 513: Application Interpreted
Construct: Elementry Boundary Representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 514: Application Interpreted
Construct: Advanced Boundary Representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 515: Application Interpreted
Construct: Constructive Solid Geometry First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 517: Application Interpreted
Construct: Mechanical Design Geometric Presentation First Edition; Corrigendum 1: 02/01/2002
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 518: Application Interpreted
Construct: Mechanical Design Shaded Presentation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 519: Application Interpreted
Construct: Geometric Tolerances First Edition; Technical Corrigendum 1: 10/15/2000
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 520: Application Interpreted
Construct: Associative Draughting Elements First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 521: Application Interpreted
Construct: Manifold Subsurface First Edition
Industrial automation systems and integration Product data representation and exchange Part 522: Application interpreted construct:
Machining features Second Edition
Industrial automation systems and integration Product data representation and exchange Part 523: Application interpreted construct:
Curve swept solid First Edition
Water quality ù Determination of dissolved anions by liquid chromatography of ions ù Part 1: Determination of bromide, chloride,
fluoride, nitrate, nitrite, phosphate and sulfate Second Edition [Cancelled: ISO 10304-2]
Water Quality - Determination of Dissolved Anions by Liquid Chromatography of Ions - Part 3: Determination of Chromate, Iodide,
Sulfite, Thiocyanate and Thiosulfate First Edition
Water Quality - Determination of Dissolved Anions by Liquid Chromatography of Ions - Part 4: Determination of Chlorate, Chloride
and Chlorite in Water with Low Contamination First Edition
Textiles - Cotton Fibres - Evaluation of Maturity by the Air Flow Method First Edition
Petroleum Products - Total Sediment in Residual Fuel Oils - Part 1: Determination by Hot Filtration First Edition; Corrigendum 1-1997
Petroleum Products - Total Sediment in Residual Fuel Oils - Part 2: Determination Using Standard Procedures for Ageing First
Edition
Metallic coatings Review of porosity tests Second Edition
Metallic Coatings - Porosity Tests - Ferroxyl Test First Edition
Neurosurgical Implants - Marking and Packaging of Implantable Neural Stimulators First Edition
ISO
ISO
10312
10313
Ambient Air - Determination of Asbestos Fibres - Direct-Transfer Transmission Electron Microscopy Method First Edition
Ambient Air - Determination of the Mass Concentration of Ozone - Chemiluminescence Method First Edition
Cigarettes - Determination of Nicotine in Smoke Condensates - Gas- Chromatographic Method Second Edition; Technical
Corrigendum 1: 11-15-2000
Shipbuilding - Class B Magnetic Compasses - Tests and Certification First Edition
Rolling Bearings - Metric Tapered Roller Bearings - Designation System First Edition
Geosynthetics Terms and definitions Second Edition
Geotextiles - Wide-Width Tensile Test First Edition (CEN EN ISO 10319: 1996)
Geotextiles and Geotextile-Related Products - Identification on Site Second Edition
Geotextiles - Tensile Test for Joints/Seams by Wide-Width Method First Edition (CEN EN ISO 10321: 1996)
Ophthalmic Optics - Semi-Finished Spectacle Lens Blanks - Part 1: Specifications for Single-Vision and Multifocal Lens Blanks Third
Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10315
10316
10317
10318
10319
10320
10321
ISO
10322-1
ISO
ISO
ISO
ISO
10322-2
10323
10324
10326-1 AMD 1
ISO
10326-1
ISO
ISO
10326-2
10327
ISO
ISO
10328
10328-5
ISO
10328-6
ISO
10330
ISO
ISO
ISO
ISO
10332
10333-1
10333-2
10333-3
Mechanical Vibration - Laboratory Method for Evaluating Vehicle Seat Vibration - Part 2: Application to Railway Vehicles First Edition
Aircraft - Certified Aircraft Container for Air Cargo - Specification and Testing First Edition
Prosthetics Structural testing of lowerlimb prostheses Requirements and test methods First Edition; Replaces ISO 10328-1:1996 to
ISO 10328-8:1996
Prosthetics - Structural Testing of Lower-Limb Prostheses - Part 5: Supplementary Structural Tests First Edition;:2006
Prosthetics - Structural Testing of Lower-Limb Prostheses - Part 6: Loading Parameters of Supplementary Structural Tests First
Edition;:2006
Photography - Synchronizers, Ignition Circuits and Connectors for Cameras and Photoflash Units - Electrical Characteristics and Test
Methods Second Edition
Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for Pressure Purposes - Ultrasonic Testing for Verification of
Hydraulic Leak-Tightness First Edition
Personal Fall-Arrest Systems - Part 1: Full-Body Harnesses First Edition; Amendment 1: 03/15/2002
Personal Fall-Arrest Systems - Part 2: Lanyards and Energy Absorbers First Edition
Personal Fall-Arrest Systems - Part 3: Self-Retracting Lifelines First Edition
ISO
10333-4
Personal Fall-Arrest Systems - Part 4: Vertical Rails and Vertical Lifelines Incorporting a Sliding-Type Fall Arrester First Edition
Ophthalmic Optics - Semi-Finished Spectacle Lens Blanks - Part 2: Specifications for Progressive Power Lens Blanks Third Edition
Dental Rotary Instruments - Bore Diameters for Discs and Wheels First Edition; (CEN EN ISO 10 323: 1995)
Information and Documentation - Holdings Statements - Summary Level First Edition
Mechanical vibration ù Laboratory method for evaluating vehicle seat vibration ù Part 1: Basic requirements First Edition
Mechanical Vibration - Laboratory Method for Evaluating Vehicle Seat Vibration - Part 1: Basic Requirements First Edition (CEN EN
30326-1:1994)
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10333-5
10333-6
10334
10336
10337
10341
10342
10343
10345-1
10345-2
10348
10349-1
Personal Fall-Arrest Systems - Part 5:Connectors with Self-Closing and Self-Locking Gates First Edition
Personal fall-arrest systems Part 6: System performance tests First Edition
Implants for Surgery - Malleable Wires for Use as Sutures and Other Surgical Applications First Edition
Crude Petroleum - Determination of Water - Potentiometric Karl Fischer Titration Method First Edition
Crude Petroleum - Determination of Water - Coulometric Karl Fischer Titration Method First Edition
Ophthalmic Instruments - Refractor Heads First Edition
Ophthalmic Instruments - Eye Refractometers Second Edition
Ophthalmic Instruments - Ophthalmometers First Edition
Glass - Determination of Stress-Optical Coefficient - Part 1: Tensile Test First Edition
Glass - Determination of Stress-Optical Coefficient - Part 2: Bending Test First Edition
Photography - Processing Wastes - Determination of Silver Content First Edition
Photography - Photographic-Grade Chemicals - Test Methods - Part 1: General First Edition Second edition
ISO
10349-2
ISO
ISO
10349-3
10349-4
Photography - Photographic-Grade Chemicals - Test Methods - Part 2: Determination of Matter Insoluble in Water First Edition
Photography - Photographic-Grade Chemicals - Test Methods - Part 3: Determination of Matter Insoluble in Ammonium Hydroxide
Solution First Edition
Photography - Photographic-Grade Chemicals - Test Methods - Part 4: Determination of Residue After Ignition First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10349-5
10349-6
10349-7
10349-8
10349-9
10349-10
10349-11
10349-12
10349-13
10350-1
Photography - Photographic-Grade Chemicals - Test Methods - Part 5: Determination of Heavy Metals and Iron Content First Edition
Photography - Photographic-Grade Chemicals - Test Methods - Part 6: Determination of Halide Content First Edition
Photography - Photographic-Grade Chemicals - Test Methods - Part 7: Determination of Alkalinity or Acidity First Edition
Photography - Photographic-Grade Chemicals - Test Methods - Part 8: Determination of Volatile Matter Second edition
Photography - Photographic-Grade Chemicals - Test Methods - Part 9: Reaction to Ammoniacal Silver Nitrate First Edition
Photography - Photographic-Grade Chemicals - Test Methods - Part 10: Determination of Sulfide Content First Edition
Photography - Photographic-Grade Chemicals - Test Methods - Part 11: Determination of Specific Gravity First Edition
Photography - Photographic-Grade Chemicals - Test Methods - Part 12: Determination of Density First Edition
Photography - Photographic-Grade Chemicals - Test Methods - Part 13: Determination of pH First Edition
Plastics ù Acquisition and presentation of comparable single-point data ù Part 1: Moulding materials Second Edition
ISO
ISO
ISO
ISO
ISO
10350-2
10352
10354
10355
10356
Plastics - Aquisition and Presentation of Comparable Single-Point Data - Part 2: Long-Fibre-Reinforced Plastics First Edition
Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Mass per Unit Area Second Edition
Adhesives - Characterization of Durability of Structural -Adhesive-Bonded Assemblies - Wedge Rupture Test First Edition
Mopeds - Positioning of Lighting and Light-Signalling Devices Second Edition
Cinematography - Storage and Handling of Nitrate- Base Motion-Picture Films First Edition
ISO
10359-1
Water Quality - Determination of Fluoride - Part 1: Electrochemical Probe Method for Potable and Lightly Polluted Water First Edition
ISO
10359-2
Water Quality - Determination of Fluoride - Part 2: Determination of Inorganically Bound Total Fluoride After Digestion and Distillation
First Edition
ISO
10360-1
ISO
10360-2
ISO
10360-3
ISO
10360-4
ISO
10360-5
ISO
10360-6 CORR 1
ISO
10360-6
ISO
ISO
ISO
ISO
ISO
ISO
10361
10362-1
10362-2
10363
10364
10365
ISO
10366-1
ISO
10366-2
Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 1:
Vocabulary Specification Geometrique Des Produits (GPS) - Essais De Reception Et De Verification Periodique Des Machines A
Mesurer Tridimensionnelles (MMT) - Partie 1: Vocabulaire First Edition; Corrigendum 1: 11/15/2002
Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 2:
CMMs Used for Measuring Size Second Edition
Geometrical Product Specifications (GPS) - Acceptance and Reverification Test for Coordinate Measuring Machines (CMM) - Part 3:
CMMs with the Axis of a Rotary Table as the Fourth Axis First Edition
Geometrical Product Specifications (GPS) - Acceptance and Reverification Test for Coordinate Measuring Machines (CMM) - Part 4:
CMMs Used in Scanning Measuring Mode First Edition; Corrigendum 1: 11/15/2002
Geometrical Product Specifications (GPS) Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) Part 5:
CMMs Using Multiple-Stylus Probing Systems First Edition
Geometrical Product Specifications (GPS) ù Acceptance and reverification tests for coordinate measuring machines (CMM) ù Part 6:
Estimation of errors in computing Gaussian associated features
Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 6:
Estimation of Errors in Computing Gaussian Associated Features First Edition
Textile Floor Coverings - Production of Changes in Appearance by Means of Vettermann Drum and Hexapod Tumbler Testers First
Edition
Cigarettes - Determination of Water in Smoke Condensates - Part 1: Gas-Chromatographic Method Second Edition
Cigarettes - Determination of Water in Smoke Condensates - Part 2: Karl Fischer Method First Edition
Hot-Melt Adhesives - Determination of Thermal Stability First Edition (CEN EN ISO 10363: 1995)
Structural adhesives ù Determination of the pot life (working life) of multi-component adhesives Second Edition
Adhesives - Designation of Main Failure Patterns First Edition (CEN EN ISO 10365: 1995)
Plastics - Methyl Methacrylate-Acrylonitrile-Butadiene-Styrene (MABS) Moulding and Extrusion Materials - Part 1: Designation System
and Basis for Specifications Second Edition
Plastics Methyl methacrylateacrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Part 2: Preparation of test
specimens and determination of properties Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
10367
10368
10370
10371
10372
10373-1
Information Technology - Standardized Coded Graphic Character Sets for Use in 8-Bit Codes Technical Corrigendum 1:06/01/2001
Freight thermal containers Remote condition monitoring Second Edition
Petroleum Products - Determination of Carbon Residue - Micro Method First Edition (CEN EN ISO 10370: 1996)
Reinforcement Materials - Braided Tapes - Basis for a Specification First Edition
Hydraulic Fluid Power - Four- and Five-Port Servovalves - Mounting Surfaces First Edition
Identification Cards - Test Methods - Part 1: General Characteristics Second Edition
ISO
10373-2
Identification cards Test methods Part 2: Cards with magnetic stripes Second Edition
ISO
ISO
10373-3
10373-5
Identification Cards - Test Methods - Part 3: Integrated Circuit(s) Cards with Contacts and Related Interface Devices First Edition
Identification cards - Test methods - Part 5: Optical memory cards Second Edition
ISO
10373-6 AMD 1
ISO
10373-6 AMD 3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10373-6 AMD 4
10373-6 AMD 2
10373-6
10373-6 FDAM 5
10373-7
10374
10375
ISO
ISO
ISO
ISO
ISO
10378
10380
10381-1
10381-2
10381-3
ISO
10381-4
ISO
10381-5
ISO
ISO
ISO
10381-6
10381-7
10381-8
ISO
ISO
ISO
ISO
ISO
10382
10383
10384
10386
10387
Identification cards ù Test methods ù Part 6: Proximity cards AMENDMENT 1: Protocol test methods for proximity cards First Edition
Identification cards ù Test methods ù Part 6: Proximity cards AMENDMENT 3: Protocol test methods for proximity coupling devices
First Edition
Identification cards ù Test methods ù Part 6: Proximity cards AMENDMENT 4: Additional test methods for PCD RF interface and
PICC alternating field exposure First Edition
Identification cards ù Test methods ù Part 6: Proximity cards AMENDMENT 2: Improved RF test methods First Edition
Identification Cards - Test Methods - Part 6: Proximity Cards First Edition
Identification Cards - Test Methods - Part 6: Proximity Cards AMENDMENT 5: Bit rates of fc/64, fc/32 and fc/16
Identification Cards - Test Methods - Part 7: Vicinity Cards First Edition
Freight Containers - Automatic Identification First Edition; Amendment 1: 1995
Non-Destructive Testing - Ultrasonic Inspection - Characterization of Search Unit and Sound Field First Edition
Copper, lead and zinc sulfide concentrates Determination of gold and silver Fire assay gravimetric and flame atomic absorption
spectrometric method Second Edition
Pipework - Corrugated Flexible Metallic Hose and Hose Assemblies Second Edition
Soil quality - Sampling - Part 1: Guidance in the design of sampling programs First edition
Soil Quality - Sampling - Part 2: Guidance on Sampling Techniques First Edition
Soil Quality - Sampling - Part 3: Guidance on Safety First Edition
Soil quality Sampling Part 4: Guidance on the procedure for investigation of natural, near-natural and cultivated sites First Edition
Soil quality Sampling Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil
contamination First Edition
Soil Quality - Sampling - Part 6: Guidance on the Collection, Handling and Storage of Soil for the Assessment of Aerobic Microbial
Processess in the Laboratory First Edition
Soil quality Sampling Part 7: Guidance on sampling of soil gas First Edition
Soil quality Sampling Part 8: Guidance on sampling of stockpiles First Edition
Soil Quality - Determination of Organochlorine Pesticides and Polychlorinated Biphenyls - Gas-Chromatographic Method with
Electron Capture Detection First Edition
Securities and related financial instruments Codes for exchanges and market identification (MIC) second Edition
Hot-Rolled Carbon Steel Sheet as Defined by Chemical Composition Second Edition
Ferroboron - Specification and Conditions of Delivery First Edition
Metal Chrome - Specification and Conditions of Delivery First Edition
ISO
ISO
10390
10392
ISO
10396
Soil quality - Determination of pH Second Edition
Road Vehicles with Two Axles - Determination of Centre of Gravity First Edition
Stationary source emissions ù Sampling for the automated determination of gas emission concentrations for permanentlyinstalled
monitoring systems Second Edition
ISO
ISO
ISO
10397
10398
10399
Stationary Source Emissions - Determination of Asbestos Plant Emissions - Method by Fibre Count Measurement First Edition
Rubber - Identification of Accelerators in Cured and Uncured Compounds First Edition
Sensory analysis Methodology Duo-trio test Second Edition
ISO
ISO
10400
10405
Petroleum and Natural Gas Industries - Formulae and Calculation for Casing, Tubing, Drill Pipe and Line Pipe Properties First Edition
Petroleum and Natural Gas Industries - Care and Use of Casing and Tubing Second Edition
ISO
ISO
ISO
ISO
10407
10414-1
10414-2
10416
ISO
10417
Petroleum and Natural Gas Industries - Drilling and Production Equipment - Drill Stem Design and Operating Limits First Edition
Petroleum and Natural Gas Industries - Field Testing of Drilling Fluids - Part 1: Water-Based Fluids First Edition
Petroleum and Natural Gas Industries - Field Testing of Drilling Fluids - Part 2: Oil-Based Fluids First Edition
Petroleum and natural gas industries Drilling fluids Laboratory testing First Edition
Petroleum and Natural Gas Industries - Subsurface Safety Petroleum and natural gas industries Subsurface safety valve systems
Design, installation, operation and redress Second Edition
ISO
10418
Petroleum and natural gas industries Offshore production installations Basic surface process safety systems Second Edition
ISO
ISO
ISO
ISO
10423
10424-1
10425
10426-1
ISO
10426-2 CORR 1
ISO
10426-2 AMD 1
ISO
10426-2
ISO
10426-3
ISO
10426-4
Petroleum and Natural Gas Industries - Drilling and Production Equipment - Wellhead and Christmas Tree Equipment Third Edition
Petroleum and natural gas industries Rotary drilling equipment Part 1: Rotary drill stem elements First Edition
Steel wire ropes for the petroleum and natural gas industries Minimum requirements and terms of acceptance First Edition
Petroleum and natural gas industries Cements and materials for well cementing Part 1: Specification Second Edition
Petroleum and natural gas industries ù Cements and materials for well cementing ù Part 2: Testing of well cements TECHNICAL
CORRIGENDUM 1
Petroleum and natural gas industries Cements and materials for well cementing Part 2: Testing of well cements AMENDMENT 1:
Water-wetting capability testing First Edition
Petroleum and natural gas industries Cements and materials for well cementing Part 2: Testing of well cements First Edition
Petroleum and natural gas industries Cements and materials for well cementing Part 3: Testing of deepwater well cement
formulations First Edition
Petroleum and natural gas industries Cements and materials for well cementing Part 4: Preparation and testing of foamed cement
slurries at atmospheric pressure First Edition
ISO
10426-5
ISO
10427-1
ISO
10427-2
ISO
10427-3
ISO
ISO
ISO
ISO
ISO
10428
10431
10432
10434
10437
ISO
10438-1
ISO
FDIS 10438-1
ISO
10438-3
ISO
FDIS 10438-3
ISO
10438-4
ISO
ISO
FDIS 10438-4
10439
ISO
10440-2
ISO
ISO
ISO
ISO
ISO
10441
10442
10444
10447
10448
Petroleum and natural gas industries Cements and materials for well cementing Part 5: Determination of shrinkage and expansion
of well cement formulations at atmospheric pressure First Edition
Petroleum and Natural Gas Industries - Equipment for Well Cementing - Part 1: Casing Bow-Spring Centralizers First Edition
/Cobranded with API Spec 10D; Corrected Version 10-01-2003; Together with ISO 10427-2 and ISO 10427-3 Replaces ISO
10427:1993
Petroleum and natural gas industries Equipment for well cementing Part 2: Centralizer placement and stop-collar testing First
Edition; Together with ISO 10427-1 and ISO 10427-3 Replaces ISO 10427:1993
Petroleum and Natural Gas Industries - Equipment for Well Cementing - Part 3: Performance Testing of Cementing Float Equipment
First Edition; Together with ISO 10427-1 and ISO 10427-2 Replaces ISO 10427:1993
Petroleum and Natural Gas Industries - Sucker Rods (Pony Rods, Polished Rods, Couplings and Sub-Couplings) - Specification First
Edition
Petroleum and Natural Gas Industries - Pumping Units - Specification First Edition
Petroleum and Natural Gas Industries - Downhole Equipment - Subsurface Safety Valve Equipment Third Edition
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Second Edition
Petroleum, petrochemical and natural gas industries Steam turbines Special-purpose applications Second Edition
Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 1:
General requirements
Petroleum, petrochemical and natural gas industries ù Lubrication, shaft-sealing and control-oil systems and auxiliaries ù Part 1:
General requirements
Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3:
General-purpose oil systems First Edition
Petroleum, petrochemical and natural gas industries ù Lubrication, shaft-sealing and control-oil systems and auxiliaries ù Part 3:
General-purpose oil systems
Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Selfacting gas seal support systems First Edition
Petroleum, petrochemical and natural gas industries ù Lubrication, shaft-sealing and control-oil systems and auxiliaries ù Part 4: Selfacting gas seal support systems
Petroleum, Chemical and Gas Service Industries - Centrifugal Compressors First Edition; Corrected Version 06/15/2003
Petroleum and Natural Gas Industries - Rotary-Type Positive-Displacement Compressors - Part 2: Packaged Air Compressors (Oil
Free) First Edition
Petroleum, petrochemical and natural gas industries ù Flexible couplings for mechanical power transmission ù Special-purpose
applications Second Edition
Petroleum, Chemical and Gas Service Industries Packaged, Integrally Geared Centrifugal Air Compressors First Edition
Information and Documentation - International Standard Technical Report Number (ISRN) First Edition
Resistance welding Peel and chisel testing of resistance spot and projection welds Second Edition
Agricultural Tractors - Hydraulic Pressure for Implements First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10451
10454
10455
10456
10457
10458
10459
10460
10461 AMD 1
10461
10462
Dental Implant Systems - Contents of Technical File First Edition
Truck and Bus Tyres - Verifying Tyre Capabilities - Laboratory Test Methods First Edition
Road Vehicles - Dry Ignition Coils Using Rotating High-Voltage Distributor First Edition
Building Materials and Products - Procedures for Determining Declared and Design Thermal Values Second Edition
Textile machinery Dyeing and finishing machines Nominal speeds Second Edition
Textile Machinery - Square Bars for Winding Devices Relating to Dyeing and Finishing Machines - Dimensions First Edition
Textile Machinery - Dyeing and Finishing Machines - Designation of Operating Ranges of Component Parts First Edition
Gas cylinders Welded carbon-steel gas cylinders Periodic inspection and testing Second Edition
Gas cylinders ù Seamless aluminiumalloy gas cylinders ù Periodic inspection and testing AMENDMENT 1 Second Edition
Gas cylinders ù Seamless aluminium-alloy gas cylinders ù Periodic inspection and testing Second Edition
Gas cylinders Transportable cylinders for dissolved acetylene Periodic inspection and maintenance Second Edition
ISO
10464
ISO
10466
ISO
10467
ISO
ISO
ISO
10468
10469
10470
ISO
ISO
ISO
10471
10472-1
10472-2
Gas cylinders Refillable welded steel cylinders for liquefied petroleum gas (LPG) Periodic inspection and testing First Edition
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Test Method to Prove the Resistance to Initial Ring
Deflection First Edition
Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP)
systems based on unsaturated polyester (UP) resin First Edition
Glass-reinforced thermosetting plastics (GRP) pipes Determination of the long-term specific ring creep stiffness under wet conditions
and calculation of the wet creep factor First Edition
Copper sulfide concentrates - Determination of copper - Electrogravimetric method Second Edition
Green Coffee - Defect Reference Chart Second Edition
Glass-reinforced thermosetting plastics (GRP) pipes Determination of the long-term ultimate bending strain and the long-term
ultimate relative ring deflection under wet conditions First Edition
Safety Requirements for Industrial Laundry Machinery - Part 1: Common Requirements First Edition
Safety Requirements for Industrial Laundry Machinery - Part 2: Washing Machines and Washer-Extractors First Edition
ISO
ISO
ISO
ISO
10472-3
10472-4
10472-5
10472-6
Safety Requirements for Industrial Laundry Machinery - Part 3: Washing Tunnel Lines Including Component Machines First Edition
Safety Requirements for Industrial Laundry Machinery - Part 4: Air Dryers First Edition
Safety Requirements for Industrial Laundry Machinery - Part 5: Flatwork Ironers, Feeders and Folders First Edition
Safety Requirements for Industrial Laundry Machinery - Part 6:Ironing and Fusing Presses First Edition
ISO
ISO
ISO
ISO
10473
10474
10475
10477
Ambient Air - Measurement of the Mass of Particulate Matter on a Filter Medium - Beta-Ray Absorption Method First Edition
Steel and Steel Products - Inspection Documents First Edition; (Corrected and Reprinted - 1992)
Valves for Tubeless Tyres and Valves for Tubes - Identification System for Valves and Their Components First Edition
Dentistry - Polymer-Based Crown and Bridge Materials Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10478
10483-1
10483-2
10484
10485
10486
10487-1
10487-2
10494
10497
10498
ISO
ISO
10499
10499-2
ISO
10500
ISO
10502
ISO
ISO
ISO
ISO
ISO
10504
10508
10509
10510
10511
ISO
10512
ISO
ISO
ISO
ISO
ISO
10513
10514-1
10514-2
10514-3
10517
ISO
ISO
10518
10519
Petroleum Products - Determination of Aluminium and Silicon in Fuel Oils - Inductively Coupled Plasma Emission and Atomic
Absorption Spectroscopy Methods First Edition
Road vehicles Intelligent power switches Part 1: High-side intelligent power switch Second Edition
Road Vehicles - Intelligent Power Switches - Part 2: Low-Side Intelligent Power Switch First Edition
Widening Test on Nuts First Edition
Cone Proof Load Test on Nuts First Edition
Passenger Cars - Car Radio Identification Number (CRIN) First Edition
Passenger Car Radio Connections - Part 1: Dimensions and General Requirements First Edition
Passenger Cars - Connections for Car Radios - Part 2: Performance Requirements First Edition
Gas Turbines and Gas Turbine Sets - Measurement of Emitted Airborne Noise - Engineering/Survey Method First Edition
Testing of Valves - Fire Type-Testing Requirements Second Edition
Ambient air Determination of sulfur dioxide Ultraviolet fluorescence method First Edition
Industrial Tyres and Rims - Solid Tyres (Metric Series) for Pneumatic Tyre Rims - Designation, Dimensions and Marking First Edition;
Corrigendum 1-1997
Industrial Tyres and Rims - Rubber Solid Tyres (Metric Series) for Pneumatic Tyre Rims - Part 2: Load Ratings First Edition
Industrial Tyres and Rims - Cylindrical and Conical Base Rubber Solid Tyres (Metric Series) - Designation, Dimensions and Marking
First Edition
Aerospace - Hose Assemblies in Polytetrafluoroethylene (PTFE) for Use up to 232 Degrees C and 10 500 kPa - Procurement
Specification First Edition
Starch Derivatives - Determination of the Composition of Glucose Syrups, Fructose Syrups and Hydrogenated Glucose Syrups Method Using High-Performance Liquid Chromatography First Edition
Plastics piping systems for hot and cold water installations - Guidance for classification and design Second Edition
Hexagon Flange Head Tapping Screws First Edition (AS/NZS 4410: 1996)
Tapping Screw and Washer Assemblies with Plain Washers First Edition
Prevailing Torque Type Hexagon Thin Nuts (with Non-Metallic Insert) First Edition
Prevailing Torque Type Hexagon Nuts (with Non-Metallic Insert), Style 1, with Metric Fine Pitch Thread - Property Classes 6, 8 and 10
First Edition
Prevailing Torque Type All-Metal Hexagon Nuts, Style 2, with Metric Fine Pitch Thread - Property Classes 8, 10 and 12 First Edition
Information Technology - Programming Languages - Part 1: Modula-2, Base Language First Edition
Information Technology - Programming Languages - Part 2: Generics in Modula-2 First Edition
Information Technology - Programming Languages - Part 3: Object Oriented Modula-2 First Edition
Portable Powered Hedge Trimmers - Definitions, Mechanical Safety Requirements and Tests First Edition
Powered Walk-Behind and Hand-Held Lawn Trimmers and Lawn Edge Trimmers - Mechanical Safety Requirements and Test
Methods First Edition; (Corrected and Reprinted - 1991) (Amendment 1-1994)
Rapeseed - Determination of Chlorophyll Content - Spectrometric Method Second Edition
ISO
10520
Native Starch - Determination of Starch Content - Ewers Polarimetric Method First Edition
Road vehicles Road load Part 1: Determination under reference atmospheric conditions First Edition; Together with ISO 105212:2006 replaces ISO 10521:1992
Road vehicles Road load Part 2: Reproduction on chassis dynamometer First Edition; Together with ISO 10521-1:2006 replaces
ISO 10521:1992
Agricultural Irrigation Equipment - Direct-Acting Pressure-Regulating Valves First Edition
Water Quality - Determination of pH First Edition
Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices First
Edition; Supersedes ISO 10524: 1995
Pressure regulators for use with medical gases Part 2: Manifold and line pressure regulators First edition
Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves First edition
ISO
10521-1
ISO
ISO
ISO
10521-2
10522
10523
ISO
ISO
ISO
10524-1
10524-2
10524-3
ISO
ISO
10525
10526
Counterbalanced Trucks Handling Freight Containers of 6 m (20 ft) Length and Above - Additional Stability Tests First Edition
CIE Standard Illuminants for Colorimetry Second Edition; CIE S 005
ISO
ISO
ISO
10528
10530
10531
ISO
ISO
10532
10533
ISO
10534-1
ISO
ISO
10534-2
10535
Textiles - Commercial Laundering Procedure for Textile Fabrics Prior to Flammability Testing First Edition (CEN EN ISO 10528 : 1995
Water Quality - Determination of Dissolved Sulfide - Photometric Method Using Methylene Blue First Edition
Packaging - Complete, Filled Transport Packages - Stability Testing of Unit Loads First Edition
Earth-Moving Machinery - Machine-Mounted Retrieval Device - Performance Requirements First Edition First Edition; Amendment 1:
9/1/2004
Earth-Moving Machinery - Lift-Arm Support Devices First Edition; Amendment 1: 06/01/2005
Acoustics - Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes - Part 1: Method Using Standing
Wave Ratio First Edition
Acoustics - Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes - Part 2: Transfer-Function Method
First Edition
Hoists for the transfer of disabled persons Requirements and test methods Second Edition
ISO
10536-1
Identification Cards - Contactless Integrated Circuit(s) Cards - Close-Coupled Cards - Part 1: Physical Characteristics Second Edition
ISO
ISO
ISO
ISO
ISO
10536-2
10536-3
10538
10539
10540-1
ISO
10540-2
Identification Cards - Contactless Integrated Circuit(s) Cards - Part 2: Dimensions and Location of Coupling Areas First Edition
Identification Cards - Contactless Integrated Circuit(s) Cards - Part 3: Electronic Signals and Reset Procedures First Edition
Information Technology - Control Functions for Text Communication First Edition
Animal and Vegetable Fats and Oils - Determination of Alkalinity First Edition
Animal and Vegetable Fats and Oils - Determination of Phosphorus Content - Part 1: Colorimetric Method First Edition
Animal and vegetable fats and oils Determination of phosphorus content Part 2: Method using graphite furnace atomic absorption
spectrometry First Edition
ISO
10540-3
ISO
10542-1
ISO
10542-2
ISO
10542-3
ISO
10542-4
ISO
10542-5
ISO
ISO
ISO
ISO
10543
10544
10545-1
10545-2
ISO
ISO
10545-3
10545-4
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10545-5
10545-6
10545-7
10545-8
10545-9
10545-10
10545-11
10545-12
10545-13
10545-14
10545-15
10545-16
ISO
ISO
10546
10548
Animal and vegetable fats and oils Determination of phosphorus content Part 3: Method using inductively coupled plasma (ICP)
optical emission spectroscopy First Edition
Technical Systems and Aids for Disabled or Handicapped Persons - Wheelchair Tiedown and Occupant-Restraint Systems - Part 1:
Requirements and Test Methods for All Systems First Edition
Technical Systems and Aids for Disabled or Handicapped Persons - Wheelchair Tiedown and Occupant-Restraint Systems - Part 2:
Four-Point Strap-Type Tiedown Systems First Edition
Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 3:
Docking-type tiedown systems First Edition
Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 4: Clamptype tiedown systems First Edition
Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 5:
Systems for specific wheelchairs First Edition
Seamless and Hot-Stretched-Reduced Welded Steel Tubes for Pressure Purposes - Full Peripheral Ultrasonic Thickness Testing
First Edition
Cold-Reduced Steel Wire for the Reinforcement of Concrete and the Manufacture of Welded Fabric First Edition
Ceramic Tiles - Part 1: Sampling and Basis for Acceptance First Edition
Ceramic Tiles - Part 2: Determination of Dimensions and Surface Quality First Edition; Corrigendum 1 02/15/1997
Ceramic Tiles - Part 3: Determination of Water Absorption, Apparent Porosity, Apparent Relative Density and Bulk Density First
Edition; Corrigendum 1 02/15/1997
Ceramic Tiles - Part 4: Determination of Modulus of Rupture and Breaking Strength Second Edition
Ceramic Tiles - Part 5: Determination of Impact Resistance by Measurement of Coefficient of Restitution First Edition; Corrigendum 1
02/15/1997
Ceramic Tiles - Part 6: Determination of Resistance to Deep Abrasion for Unglazed Tiles First Edition
Ceramic Tiles - Part 7: Determination of Resistance to Surface Abrasion for Glazed Tiles First Edition
Ceramic Tiles - Part 8: Determination of Linear Thermal Expansion First Edition CEN 10 545-8: 1996
Ceramic tiles Part 9: Determination of resistance to thermal shock Second Edition
Ceramic Tiles - Part 10: Determination of Moisture Expansion First Edition
Ceramic Tiles - Part 11: Determination of Crazing Resistance for Glazed Tiles First Edition CEN EN ISO 10 545-11: 1996
Ceramic Tiles - Part 12: Determination of Frost Resistance First Edition; Corrigendum 1 02/15/1997
Ceramic Tiles - Part 13: Determination of Chemical Resistance First Edition
Ceramic Tiles - Part 14: Determination of Resistance to Stains First Edition; Corrigendum 1 02/15/1997
Ceramic Tiles - Part 15: Determination of Lead and Cadmium Given off by Glazed Tiles First Edition
Ceramic Tiles - Part 16: Determination of Small Colour Differences First Edition
Chemical Conversion Coatings - Rinsed and Non-Rinsed Chromate Conversion Coatings on Aluminium and Aluminium Alloys First
Edition
Carbon Fibre - Determination of Size Content Second Edition
ISO
10550
Micrographics - Planetary Camera Systems - Test Target for Checking Performance First Edition
Ergonomics of the Thermal Environment - Assessment of the Influence of the Thermal Environment Using Subjective Judgement
Scales First Edition
Timekeeping Instruments - Crowns and Sealed Tubes - Designs and Dimensions First Edition
Horology - Procedure for Evaluating the Accuracy of Quartz Watches First Edition; Replaces ISO TR 10553
Sterile, Single-Use Intravascular Catheters - Part 1: General Requirements First Edition; CEN EN ISO 10 555-1: 1996; Amendment 1:
7/15/99; Amendment 2: 05/15/2004
ISO
ISO
ISO
10551
10552
10553
ISO
10555-1
ISO
ISO
ISO
10555-2
10555-3
10555-4
ISO
10555-5
ISO
ISO
ISO
10561
10563
10564
ISO
ISO
ISO
ISO
ISO
ISO
10565
10566
10567
10570
10571
10573
ISO
ISO
ISO
ISO
10576-1
10578
10579
10583
ISO
10585
Information and Documentation - Armenian Alphabet Coded Character Set for Bibliographic Information Interchange First Edition
ISO
10586
ISO
10587
Information and Documentation - Georgian Alphabet Coded Character Set for Bibliographic Information Interchange First Edition
Metallic and Other Inorganic Coatings - Test for Residual Embrittlement in both Metallic-Coated and Uncoated Externally-Threaded
Articles and Rods - Inclined Wedge Method First Edition
Sterile, Single-Use Intravascular Catheters - Part 2: Angiographic Catheters First Edition; Technical Corrigendum 1: 6/15/2002
Sterile, Single-Use Intravascular Catheters - Part 3: Central Venous Catheters First Edition; Corrigendum 1: 6/15/2002
Sterile, Single-Use Intravascular Catheters - Part 4: Balloon Dilatation Catheters First Edition; Corrigendum 1: 6/15/2002
Sterile, Single-Use Intravascular Catheters - Part 5: Over-Needle Peripheral Catheters First Edition; Amendment 1: 01/15/1999;
Corrected and Reprinted 07/15/1999: Corrigendum 1: 6/15/2002
Information Technology - Office Equipment - Printing Devices - Method for Measuring Throughput - Class 1 and Class 2 Printers
Second Edition
Building construction - Sealants - Determination of change in mass and volume Second Edition
Soldering and Brazing Materials - Methods for the Sampling of Soft Solders for Analysis First Edition
Oilseeds - Simultaneous Determination of Oil and Water Contents - Method Using Pulsed Nuclear Magnetic Resonance
Spectrometry Second Edition
Water Quality - Determination of Aluminium - Spectrometric Method Using Pyrocatechol Violet First Edition
Earth-Moving Machinery - Hydraulic Excavators - Lift Capacity First Edition; (Corrected and Reprinted - 1993)
Earth-moving machinery Articulated frame lock Performance requirements Second Edition
Tyres for Mobile Cranes and Similar Specialized Machines First Edition
Soil Quality - Determination of Water Content in the Unsaturated Zone - Neutron Depth Probe Method First Edition
Statistical Methods - Guidelines for the Evaulation of Conformity with Specified Requirements - Part 1: General Principles First Edition
Technical Drawings - Tolerancing of Orientation and Location - Projected Tolerance Zone First Edition
Technical Drawings - Dimensioning and Tolerancing - Non-Rigid Parts First Edition
Aerospace Fluid Systems - Test Methods for Tube/Fitting Assemblies First Edition
ISO
10588
ISO
10589
ISO
10590
ISO
ISO
ISO
ISO
ISO
10591
10592
10594
10597
10599-1
ISO
ISO
ISO
10599-2
10601
10604
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10605
10618
10620
10621
10622
10624
10625
10626
10627-1
10627-2
10628
ISO
ISO
ISO
10629
10630
10631
ISO
10632
Information Technology - Use of X.25 Packet Layer Protocol in Conjunction with X.21/X.21 bis to Provide the OSI Connection-Mode
Network Service First Edition; (CCITT RECMN X.613)
Information Technology - Telecommunications and Information Exchange Between Systems - Intermediate System to Intermediate
System Intra-Domain Routeing Information Exchange Protocol for Use in Conjunction with the Protocol for Providing the
Connectionless-Mode Network Service (ISO 8473) Second Edition
Building construction Sealants Determination of tensile properties of sealants at maintained extension after immersion in water
Second Edition
Building construction Sealants Determination of adhesion/cohesion properties of sealants after immersion in water Second Edition
Small Craft - Hydraulic Steering Systems First Edition
Micrographics Rotary Camera Systems Test Target for Checking Performance Second Edition
Road vehicles Flat attachment fixing nuts for commercial vehicles Test methods Second Edition
Car Radios - Coaxial Aerial Connectors - Part 1: Dimensions First Edition
Car radios - Coaxial aerial connectors - Part 2: Characteristic values, performance requirements and tests First Edition; Corrigendum
1:9/15/2005
Micaceous iron oxide pigments for paints ù Specifications and test methods Second edition
Road Vehicles - Measurement Equipment for Orientation of Headlamp Luminous Beams First Edition
Road Vehicles - Test Methods for Electrical Disturbances from Electrostatic Discharge First Edition; Cancels and Replaces ISO TR
10605
Carbon Fibre - Determination of Tensile Properties of Resin-Impregnated Yarn Second Edition
Dried Sweet Marjoram (Origanum Majorana L.) - Specification First Edition
Dehydrated Green Pepper (Piper Nigrum L.) - Specification First Edition
Large Cardamom (Amomum Subulatum Roxb.), as Capsules and Seeds - Specification First Edition
Oil of Elemi (Canarium Luzonicum Miq.) First Edition
Equipment for Crop Protection - Sprayer Nozzles - Colour Coding for Identification Second Edition
Equipment for Crop Protection - Sprayers - Connecting Dimensions for Nozzles with Bayonet Fixing First Edition
Agricultural Sprayers - Data Sheet - Part 1: Typical Layout First Edition
Hydraulic Agricultural Sprayers - Data Sheets - Part 2: Technical Specifications Related to Components First Edition
Flow Diagrams for Process Plants - General Rules First Edition
Raw Optical Glass - Resistance to Attack by Aqueous Alkaline Solutions at 50 Degrees C - Test Method and Classification First
Edition
Industrial Plate Screens - Specifications and Test Methods First Edition
Metallic Butterfly Valves for General Purposes First Edition
Oilseed Residues - Simultaneous Determination of Oil and Water Contents - Method Using Pulsed Nuclear Magnetic Resonance
Spectroscopy First Edition
ISO
10633-1
ISO
ISO
10634
10635
ISO
ISO
10636
10637
ISO
10639
ISO
ISO
ISO
ISO
10641
10642
10644
10645
ISO
10646 AMD 2
ISO
10646 AMD 1
ISO
ISO
10646
10648-1
ISO
10648-2
ISO
10650-1
ISO
10650-2
ISO
ISO
10651-2
10651-3
ISO
10651-4
ISO
10651-5
Oilseed Residues - Determination of Glucosinolates Content - Part 1: Method Using High-Performance Liquid Chromatography First
Edition
Water Quality - Guidance for the Preparation and Treatment of Poorly Water-Soluble Organic Compounds for the Subsequent
Evaluation of Their Biodegradability in an Aqueous Medium First Edition (CEN EN ISO 10634: 1995)
Refractory Products - Methods of Test for Ceramic Fibre Products First Edition
Photography - Processing Chemicals - Specifications for Anhydrous Sodium Thiosulfate and Sodium Thiosulfate Pentahydrate First
Edition;
Dental Equipment - High- and Medium-Volume Suction Systems First Edition
Plastics piping systems for pressure and non-pressure water supply Glass-reinforced thermosetting plastics (GRP) systems based
on unsaturated polyester (UP) resin First Edition
Information Technology - Computer Graphics and Image Processing - Conformance Testing of Implementations of Graphics
Standards First Edition
Hexagon socket countersunk head screws Second Edition
Screw and Washer Assemblies with Plain Washers - Washer Hardness Classes 200 HV and 300 HV First Edition
Nuclear Energy - Light Water Reactors - Calculation of the Decay Heat Power in Nuclear Fuels First Edition
Information technology ù Universal Multiple-Octet Coded Character Set (UCS) AMENDMENT 2: N'Ko, Phags-pa, Phoenician and
other characters First Edition
Information technology ù Universal Multiple-Octet Coded Character Set (UCS) AMENDMENT 1: Glagolitic, Coptic, Georgian and
other characters First Edition
Information Technology - Universal Multiple-Octet Coded Character Set (UCS) First Edition [Replaced: ISO 10646-1, ISO 10646-1,
ISO 10646-1, ISO 10646-2]
Containment Enclosures - Part 1: Design Principles First Edition
Containment Enclosures - Part 2: Classification According to Leak Tightness and Associated Checking Methods First Edition
Dentistry Powered polymerization activators Part 1: Quartz tungsten halogen lamps First Edition; Together with ISO 10650-2
Replaces ISO TS 10650:1999
Dentistry ù Powered polymerization activators ù Part 2: Light-emitting diode (LED) lamps First Edition [Cancelled: ISO TS 10650]
Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 2: Home care ventilators
for ventilatordependent patients Second Edition
Lung Ventilators for Medical Use - Part 3: Particular Requirements for Emergency and Transport Ventilators First Edition
Lung Ventilators- - Part 4: Particular Requirements for Operator-Powered Resuscitators First Edition; Together with ISO 106515:2006 replaces ISO 8382:1988 [Superseded: ASTM F 920, ASTM F 920]
Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 5: Gas-powered
emergency resuscitators First Edition; Together with ISO 10651-4:2002 replaces ISO 8382:1988 [Superseded: ASTM F 920, ASTM F
920]
ISO
10651-6
ISO
10653
ISO
ISO
10654
10656
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10658
10663
10664
10666
10669
10673
10683
10684
ISO
10691
ISO
10692-1
ISO
ISO
ISO
10692-2
10693
10694
ISO
10695
ISO
10697-1
ISO
ISO
10697-2
10698
ISO
ISO
ISO
10700
10701
10702
Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 6: Home-care ventilatory
support devices First Edition; Partly replaces ISO 10651-2:1996
Light-Gauge Metal Containers - Round Open-Top Cans - Cans Defined by Their Nominal Gross Lidded Capacities First Edition;
Light-Gauge Metal Containers - Round Open-Top Cans - Cans for Liquid Products with Added Gas, Defined by Their Nominal Filling
Volumes First Edition;
Electric Resistance Welding - Integrated Transformers for Welding Guns First Edition; Corrigendum 1: 07/01/2000
Industrial Trucks Operating in Special Conditions of Stacking with Load Laterally Displaced by Powered Devices - Additional Stability
Test First Edition
Hexagon Nuts with Flange - Fine Pitch Thread First Edition
Hexalobular internal driving feature for bolts and screws Second Edition
Drilling Screws With Tapping Screw Thread - Mechanical and Functional Properties First Edition
Plain Washers for Tapping Screw and Washer Assemblies - Normal and Large Series - Product Grade A First Edition
Plain Washers for Screw and Washer Assemblies - Small, Normal and Large Series - Product Grade A First Edition
Fasteners - Non-Electrolytically Applied Zinc Flake Coatings First Edition; JIS B 1046:2005
Fasteners Hot dip galvanized coatings First Edition
Gas cylinders Refillable welded steel cylinders for liquified petroleum gas (LPG) Procedures for checking before, during and after
filling First Edition
Gas Cylinders Gas Cylinder Valve Connections for use in the Micro-Electronics Industry Part 1: Outlet Connections First Edition
Gas Cylinders - Gas Cylinder Valve Connections for Use in the Micro-Electronics Industry - Part 2: Specification and Type Testing for
Valve to Cylinder Connections First Edition
Soil Quality - Determination of Carbonate Content - Volumetric Method First Edition
Soil Quality - Determination of Organic and Total Carbon After Dry Combustion (Elementary Analysis) First Edition
Water Quality - Determination of Selected Organic Nitrogen and Phosphorus Compounds - Gas Chromatographic Methods First
Edition
Steel - Determination of Calcium Content by Flame Atomic Absorption Spectrometry - Part 1: Determination of Acid- Soluble Calcium
Content First Edition
Steel - Determination of Calcium Content by Flame Atomic Absorption Spectrometry - Part 2: Determination of Total Calcium Content
Steel - Determination of Antimony Content - Electrothermal Atomic Absorption Spectrometric Method First Edition
Steel and Iron - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method First Edition (CEN EN ISO
10700: 1995)
Steel and Iron - Determination of Sulfur Content - Methylene Blue Spectrophotometric Method First Edition
Steer and Iron - Determination of Nitrogen Content - Titrimetric Method After Distillation First Edition
ISO
10703
ISO
ISO
10705-1
10705-2
ISO
10705-3
ISO
10705-4
ISO
10706
ISO
10707
ISO
ISO
ISO
ISO
ISO
ISO
10708
10712
10713
10714
10715
10716
ISO
10718
ISO
ISO
ISO
10720
10721-1
10721-2
ISO
ISO
10722
10723
ISO
10724-1
ISO
ISO
ISO
10724-2
10725
10726
Water Quality - Determination of the Activity Concentration of Radionuclides by High Resolution Gamma-Ray Spectrometry First
Edition
Water Quality - Detection and Enumeration of Bacteriophages - Part 1: Enumeration of F-Specific RNA Bacteriophages First Edition
Water Quality - Detection and Enumeration of Bacteriophages - Part 2: Enumeration of Somatic Coliphages First Edition
Water quality Detection and enumeration of bacteriophages Part 3: Validation of methods for concentration of bacteriophages from
water First Edition
Water Quality - Detection and Enumeration of Bacteriophages - Part 4: Enumeration of Bacteriophages Infecting Bacteroides Fragilis
First Edition
Water Quality - Determination of Long Term Toxicity of Substances to Daphnia Magna Straus (Cladocera, Crustacea) First Edition
Water Quality - Evaluation in an Aqueous Medium of theUltimate" Aerobic Biodegradability of Organic Compounds - Method by
Analysis of Biochemical Oxygen Demand (Closed Bottle Test) First Edition"
Water Quality - Evaluation in an Aqueous Medium of the Ultimate Aerobic Biodegradability of Organic Compounds - Determination of
Biochemical Oxygen Demand in a Two-Phase Closed Bottle Test First Edition
Water Quality - Pseudomonas Putida Growth Inhibition Test (Pseudomonas Cell Multiplication Inhibition Test) First Edition
Jewellery - Gold Alloy Coatings First Edition
Steel and Iron - Determination of Phosphorus Content - Phosphovanadomolybdate Spectrophotometric Method First Edition
Natural Gas - Sampling Guidelines First Edition
Paper and Board - Determination of Alkali Reserve First Edition
Cork Stoppers - Enumeration of Colony-Forming Units of Yeasts, Moulds and Bacteria Capable of Growth in an Alcoholic Medium
Second Edition
Steel and Iron - Determination of Nitrogen Content - Thermal Conductimetric Method After Fusion in a Current of Inert Gas First
Edition; BS 6200: Part 3: Section 3.22: Subsection 3.22.4: 1997
Steel Structures - Part 1: Materials and Design First Edition
Steel Structures - Part 2: Fabrication and Erection First Edition; Corrected and Reprinted 09-15-2000
Geosynthetics ù Index test procedure for the evaluation of mechanical damage under repeated loading ù Damage caused by
granular material FIrst Edition [Superseded: ISO TR 10722-1]
Natural Gas - Performance Evaluation for On-Line Analytical Systems First Edition; Technical Corrigendum 1-1998
Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 1: General Principles
and Moulding of Multipurpose Test Specimens First Edition
Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 2: Small Plates First
Edition
Acceptance Sampling Plans and Procedures for the Inspection of Bulk Materials First Edition
Portable Chain-Saws - Chain Catcher - Dimensions and Mechanical Strength First Edition
ISO
10727
ISO
10728
ISO
10731
ISO
ISO
10732
10733
ISO
ISO
10736
10737
ISO
10741-1
ISO
ISO
ISO
ISO
ISO
ISO
10742
10744
10745
10746-1
10746-2
10746-3
ISO
10746-4
ISO
ISO
10747
10752
ISO
10753
ISO
ISO
10754
10762
ISO
10763
Tea and Instant Tea in Solid Form - Determination of Caffeine Content - Method Using High-Performance Liquid Chromatography
Second Edition
Information Technology - Information Resource Dictionary System (IRDS) Services Interface First Edition; Amendment 1-1995;
Amendment 2-1996; Amendment 3-1996; Amendment 4-1998
Information Technology - Open Systems Interconnection - Basic Reference Model - Conventions for the Definition of OSI Services
First Edition
Information Technology - Use of X.25 Packet Layer Protocol to Provide the OSI Connection-Mode Network Service over the
Telephone Network First Edition; (CCITT RECMN X.614)
Information Technology - Elements of Management Information Related to OSI Network Layer Second Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Transport Layer Security Protocol First
Edition
Information Technology - Elements of Management Information Related to the OSI Transport Layer Second Edition
Information Technology - User System Interfaces - Dialogue Interaction - Part 1: Cursor Control for Text Editing First Edition;
Amendment 1 - 12/15/1996
Information Technology - Telecommunications and Information Exchange Between Systems - Elements of Management Information
Related to OSI Data Link Layer Standards First Edition; Amendment 1-11/15/1995; Amendment 2-07/15/1996; Amendment 312/15/1996; Corrigendum 1-06/15/1999
Information Technology - Hypermedia/Time-Based Structuring Language (HyTime) Second Edition
Information Technology - Open Systems Interconnection - Upper Layers Security Model First Edition
Information Technology - Open Distributed Processing - Reference Model: Overview First Edition
Information Technology - Open Distributed Processing - Reference Model: Foundations First Edition
Information Technology - Open Distributed Processing - Reference Model: Architecture First Edition
Information Technology - Open Distributed Processing - Reference Model: Architectural Semantics First Edition; Amendment 1:
12/15/2001
Information Technology - Telecommunications and Information Exchange between Systems - Protocol for Exchange of Inter-Domain
Routeing Information Among Intermediate Systems to Support Forwarding of ISO 8473 PDUs First Edition; Amendment 1-1996;
Corrigendum 1-1996
Coal Sizing Equipment - Performance Evaluation First Edition
Coal Preparation Plant - Assessment of the Liability to Breakdown in Water of Materials Associated with Coal Seams First Edition
Information and Documentation - Extension of the Cyrillic Alphabet Coded Character Set for Non-Slavic Languages for Bibliographic
Information Interchange FIrst Edition
Hydraulic Fluid Power - Cylinder Mounting Dimensions - 10 MPa (100 Bar) Series First Edition
Hydraulic Fluid Power - Plain-End, Seamless and Welded Precision Steel Tubes - Dimensions and Nominal Working Pressures First
Edition
ISO
10766
Hydraulic fluid power Cylinders Housing dimensions for rectangularsection- cut bearing rings for pistons and rods Second Edition
Hydraulic Fluid Power - Determination of Pressure Ripple Levels Generated in Systems and Components - Part 1: Precision Method
for Pumps First Edition
Hydraulic Fluid Power - Determination of Pressure Ripple Levels Generated in Systems and Components - Part 2: Simplified Method
for Pumps First Edition
Hydraulic Fluid Power - Determination of Pressure Ripple Levels Generated in Systems and Components - Part 3: Method for Motors
First Edition
Hydraulic Fluid Power - Electrically Modulated Hydraulic Control Valves - Part 1: Test Methods for Four-Way Directional Flow Control
Valves First Edition; Together with ISO 10770-2, it Cancels and Replaces ISO 6404: 1985
Hydraulic Fluid Power - Electrically Modulated Hydraulic Control Valves - Part 2: Test Methods for Three-Way Directional Flow
Control Valves First Edition; Together with ISO 10770-1, it Cancels and Replaces ISO 6404: 1985
ISO
10767-1
ISO
10767-2
ISO
10767-3
ISO
10770-1
ISO
10770-2
ISO
ISO
ISO
10771-1
10775
10780
ISO
10782-1
ISO
10787-1
ISO
ISO
10787-2
10787-3
ISO
10790
ISO
10791-1
ISO
10791-2
ISO
10791-3
Hydraulic Fluid Power - Fatigue Pressure Testing of Metal Pressure-Containing Envelopes - Part 1: Test Methods First Edition
Paper, Board and Pulps - Determination of Cadmium Content - Atomic Absorption Spectrometric Method First Edition
Stationary Source Emissions - Measurement of Velocity and Volume Flowrate of Gas Streams in Ducts First Edition
Definitions and Attributes of Data Elements for Control and Monitoring of Textile Processes - Part 1: Spinning, Spinning Preparatory
and Related Processes Definitions Et Attributs Des Elements De Donnees Pour La Surveillance Et La Supervision Des Procedes
Textiles - Partie 1: Filature, Preparation De Filature Et Procedes Associes First Edition
Textile Machinery and Accessories - Heald Frames - Part 1: Heald-Carrying Rod Fixed to the Frame Stave by Rod Support Coordinated Dimensions First Edition;
Textile Machinery and Accessories - Heald Frames - Part 2: Heald-Carrying Rod Fixed Directly on the Frame Stave - Coordinated
Dimensions First Edition;
Textile Machinery and Accessories - Heald Frames - Part 3: Guides for Heald Frames First Edition
Measurement of Fluid Flow in Closed Conduits - Guidance to the Selection, Installation and Use of Coriolis Meters (Mass Flow,
Density and Volume Flow Measurements) Second Edition; Amendment 1: 6/01/2003
Test Conditions for Machining Centres - Part 1: Geometric Tests for Machines with Horizontal Spindle and with Accessory Heads
(Horizontal Z-Axis) First Edition; Corrected and Reprinted 05/01/1999
Test Conditions for Machining Centres - Part 2: Geometric Tests for Machines with Vertical Spindle or Universal Heads with Vertical
Primary Rotary Axis (Vertical Z-Axis) First Edition
Test Conditions for Machining Centres - Part 3: Geometric Tests for Machines with Integral Indexable or Continuous Universal Heads
(Vertical Z-Axis) First Edition; Corrigendum 1: 11-15-99
ISO
10791-4
Test Conditions for Machining Centres - Part 4: Accuracy and Repeatability of Positioning of Linear and Rotary Axes First Edition
ISO
10791-5
Test Conditions for Machining Centres - Part 5: Accuracy and Repeatability of Positioning of Work-Holding Pallets First Edition
ISO
ISO
10791-6
10791-7
Test Conditions for Machining Centres - Part 6: Accuracy of Feeds, Speeds and Interpolations First Edition; Technical Corrigendum
1:4/1/2004
Test Conditions for Machining Centres - Part 7: Accuracy of a Finished Test Piece First Edition
ISO
10791-8
Test Conditions for Machining Centres - Part 8: Evaluation of Contouring Performance in the Three Coordinate Planes First Edition
ISO
ISO
10791-9
10791-10
ISO
10792-1
ISO
10792-2
ISO
ISO
ISO
ISO
ISO
ISO
10792-3
10799
10802
10803
10804-1
10806
ISO
10807
ISO
ISO
ISO
10813-1 CORR 1
10813-1
10814
Test Conditions for Machining Centres - Part 9: Evaluation of the Operating Times of Tool Change and Pallet Change First Edition
Test conditions for machining centres ù Part 10: Evaluation of thermal distortions First Edition
Aerospace - Airframe Spherical Plain Bearings in Corrosion- Resisting Steel with Self-Lubricating Liner - Part 1: Metric Series First
Edition
Aerospace - Airframe Spherical Plain Bearings in Corrosion- Resisting Steel with Self-Lubricating Liner - Part 2: Inch Series First
Edition
Aerospace - Airframe Spherical Plain Bearings in Corrosion- Resisting Steel with Self-Lubricating Liner - Part 3: Technical
Specification First Edition
Structural Steels - Cold-Formed, Welded, Structural Hollow Sections - Technical Delivery Requirements First Edition
Ductile Iron Pipelines - Hydrostatic Testing After Installation First Edition
Design Method for Ductile Iron Pipes First Edition
Restrained Joint Systems for Ductile Iron Pipelines - Part 1: Design Rules and Type Testing First Edition
Pipework Fittings for corrugated metal hoses Second Edition
Pipework - Corrugated Flexible Metallic Hose Assemblies for the Protection of Electrical Cables in Explosive Atmospheres First
Edition
Vibration generating machines ù Guidance for selection ù Part 1: Equipment for environmental testing TECHNICAL CORRIGENDUM
1 First Edition
Vibration generating machines ù Guidance for selection ù Part 1 Equipment for environmental testing First Edition
Mechanical Vibration - Susceptibility and Sensitivity of Machines to Unbalance First Edition
ISO
10815
ISO
10816-1
ISO
10816-2
Mechanical Vibration - Measurement of Vibration Generated Internally in Railway Tunnels by the Passage of Trains First Edition
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 1: General Guidelines First
Edition; Replaces ISO 2372: 1974 and ISO 3945: 1985
Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines
and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min Second
Edition; Corrigendum 1:08/01/2004
ISO
10816-3
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 3: Industrial Machines with
Nominal Power Above 15 kW and Nominal Speeds between 120 r/min and 15 000 r/min When Measured In Situ First Edition
ISO
10816-4
ISO
10816-5
ISO
ISO
10816-6
10817-1
ISO
ISO
ISO
ISO
10819
10821
10823
10825
ISO
10833
ISO
ISO
ISO
10834
10835
10836
ISO
10838-1
ISO
10838-2
ISO
ISO
ISO
ISO
ISO
ISO
10838-3
10840
10841
10842
10843
10844
ISO
10846-1
ISO
10846-2
ISO
10846-3
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 4: Gas Turbine Driven Sets
Excluding Aircraft Derivatives First Edition
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 5: Machine Sets in Hydraulic
Power Generating and Pumping Plants First Edition
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 6: Reciprocating Machines
with Power Ratings Above 100 kW First Edition
Rotating Shaft Vibration Measuring Systems - Part 1: Relative and Absolute Sensing of Radial Vibration First Edition
Mechanical Vibration and Shock - Hand-Arm Vibration - Method for the Measurement and Evaluation of the Vibration Transmissibility
of Gloves at the Palm of the Hand First Edition
Industrial sewing machines Safety requirements for sewing machines, units and systems First Edition
Guidelines for the selection of roller chain drives Second Edition
Gears - Wear and Damage to Gear Teeth - Terminology First Edition
Textile Floor Coverings - Determination of Resistance to Damage at Cut Edges Using the Modified Vettermann Drum Test Second
Edition
Textile Floor Coverings - Non-Destructive Measurement of Pile Thickness Above the Backing - WRONZ Gauge Method First Edition
(AS/NZS 2111.21: 1996)
Direct reduced iron and hot briquetted iron ù Sampling and sample preparation Second Edition
Iron Ores - Method of Sampling and Sample Preparation for Physical Testing First Edition
Mechanical Fittings for Polyethylene Piping Systems for the Supply of Gaseous Fuels - Part 1: Metal Fittings for Pipes of Nominal
Outside Diameter Less Than or Equal to 63 mm First Edition
Mechanical Fittings for Polyethylene Piping Systems for the Supply of Gaseous Fuels - Part 2: Metal Fittings for Pipes of Nominal
Outside Diameter Greater Than 63 mm First Edition
Mechanical Fittings for Polyethylene Piping Systems for the Supply of Gaseous Fuels - Part 3: Thermoplastics Fittings for Pipes of
Nominal Outside Diameter Less Than or Equal to 63 mm First Edition
Plastics - Guidance for the Use of Standard Fire Tests First Edition; Replaces ISO TR 10840
Aircraft - Catering Vehicle for Large Capacity Aircraft - Functional Requirements First Edition
Aircraft Ground service connections Locations and types First Edition
Acoustics - Methods for the Description and Physical Measurement of Single Impulses or Series of Impulses First Edition
Acoustics - Specification of Test Tracks for the Purpose of Measuring Noise Emitted by Road Vehicles First Edition
Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 1: Principles
and Guidelines First Edition
Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 2: Dynamic
Stiffness of Elastic Supports for Translatory Motion - Direct Method First Edition
Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 3: Indirect
Method for Determination of the Dynamic Stiffness of Resilient Supports for Translatory Motion First Edition
ISO
ISO
10846-4
10847
ISO
10848-1
ISO
10848-2 CORR 1
ISO
10848-2
ISO
10848-3
ISO
10849
Acoustics and vibration Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 4: Dynamic stiffness
of elements other than resilient supports for translatory motion First Edition
Acoustics - In-Situ Determination of Insertion Loss of Outdoor Noise Barriers of All Types First Edition
Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 1:
Frame document First Edition
Acoustics ù Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms ù Part 2:
Application to light elements when the junction has a small influence
Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 2:
Application to light elements when the junction has a small influence First Edition;:2000 [Replaced: ISO 140-12]
Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 3:
Application to light elements when the junction has a substantial influence First Edition
Stationary Source Emissions - Determination of the Mass Concentration of Nitrogen Oxides - Performance Characteristics of
Automated Measuring Systems First Edition
ISO
10857
Information Technology - Microprocessor Systems - Futurebus+ - Logical Protocol Specification First Edition; (ANSI/IEEE 896.1)
ISO
10859
ISO
10861
ISO
10882-1
ISO
ISO
ISO
ISO
10882-2
10885
10887
10888
Information Technology - 8-Bit Backplane Interface: STEbus and Mechanical Core Specifications for Microcomputers First Edition
Information Technology - Microprocessor Systems - High-Performance Synchronous 32-Bit Bus: MULTIBUS II First Edition;
(ANSI/IEEE 1296)
Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator s Breathing Zone Part 1: Sampling of Airborne Particles First Edition
Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator s Breathing Zone Part 2: Sampling of Gases First Edition
Information Technology - 356 mm Optical Disk Cartridge for Information Interchange - Write Once First Edition
Key Type Three-Jaw Drill Chucks - Specification First Edition
Keyless Type Three-Jaw Drill Chucks - Specification First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10889-1
10889-2
10889-3
10889-4
10889-5
10889-6
10889-7
10889-8
10897
Tool Holders with Cylindrical Shank - Part 1: Cylindrical Shank, Location Bore - Technical Delivery Conditions Second Edition
Tool Holders with Cylindrical Shank - Part 2: Type A, Shanks for Tool Holders of Special Designs Second Edition
Tool Holders with Cylindrical Shank - Part 3: Type B with Rectangular Radial Seat Second Edition
Tool Holders with Cylindrical Shank - Part 4: Type C with Rectangular Axial Seat Second Edition
Tool Holders with Cylindrical Shank - Part 5: Type D, with More Than One Rectangular Seat First Edition
Tool Holders with Cylindrical Shank - Part 6: Type E, with Cylindrical Seat Second Edition
Tool Holders with Cylindrical Shank - Part 7: Type F with Taper Seat Second Edition
Tool Holders with Cylindrical Shank - Part 8: Type Z, Accessories First Edition
Collets for Tool Holders with Taper Ratio 1:10 - Collets, Holders, Nuts First Edition
ISO
ISO
10898
10899
ISO
ISO
ISO
ISO
10907-1
10910
10911
10914
ISO
ISO
10918-1
10918-2
ISO
10918-3
ISO
ISO
ISO
10918-4
10919
10920
ISO
10928
ISO
ISO
ISO
ISO
ISO
ISO
10931
10933
10934-1
10934-2
10935
10936-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10936-2
10937
10938
10939
10940
10942
10943
10944
10945
Spot Drills First Edition (BS 328: Part 8: 1992) (NZS/BS 328: Pt 8: 1992)
High-Speed Steel Two-Flute Twist Drills - Technical Specifications First Edition
Tools For Moulding - Locating Rings - Part 1: Locating Rings for Mounting without Thermal Insulating Sheets in Small or Medium
Moulds - Types A and B First Edition
Classification and Designation of Approximate Chip Control Zones for Indexable Inserts with Chipbreakers First Edition
Solid Hardmetal End Mills With Parallel Shank - Dimensions First Edition
Assembly Tools for Screws and Nuts - Sockets and Wrenches for Spline Drive First Edition
Information technology - Digital compression and coding of continuous-tone still images - Part 1: Requirements and guidelines First
Edition; Corrigendum 1:2005
Information Technology - Digital Compression and Coding of Continuous-Tone Still Images: Compliance Testing First Edition
Information Technology - Digital Compression and Coding of Continuous-Tone Still Images: Extensions First Edition; Amendment 1:
12/01/1999
Information Technology - Digital Compression and Coding of Continuous-Tone Still Images: Registration of JPEG Profiles, SPIFF
Profiles, SPIFF Tags, SPIFF Colour Spaces, APPn Markers, SPIFF Compression Types and Registration Authorities (REGAUT) First
Edition
Oriental Leaf Tobacco - Baling First Edition
Gas Cylinders - 25E Taper Thread for Connection of Valves to Gas Cylinders - Specification First Edition
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Methods for Regression Analysis and
their Use First Edition
Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system
First Edition; Replaces ISO 10931-1 thru 10931-5
Polyethylene (PE) Valves for Gas Distribution Systems First Edition
Optics and optical instruments - Vocabulary for microscopy - Part 1: Light microscopy First Edition
Optics and optical instruments ù Vocabulary for microscopy ù Part 2: Advanced techniques in light microscopy First Edition
Optics and Optical Instruments - Microscopes - Interfacing Connection Type C First Edition
Optics and Optical Instruments - Operation Microscopes - Part 1: Requirements and Test Methods First Edition
Optics and Optical Instruments - Operation Microscopes - Part 2: Light Hazard from Operation Microscopes Used in Ocular Surgery
First Edition
Optics and Optical Instruments - Microscopes - Diameter of Interchangeable Eyepieces Second Edition
Ophthalmic Instruments - Chart Projectors First Edition
Ophthalmic Instruments - Slit-Lamp Microscopes Second Edition
Ophthalmic Instruments - Fundus Cameras First Edition
Ophthalmic Instruments - Direct Ophthalmoscopes Second Edition
Ophthalmic Instruments - Indirect Ophthalmoscopes Second Edition
Ophthalmic Instruments - Synoptophores First Edition
Hydraulic Fluid Power - Gas-Loaded Accumulators - Dimensions of Gas Ports First Edition
ISO
10946
ISO
ISO
ISO
ISO
ISO
ISO
10952
10955
10957
10958-1
10958-2
10959
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10960
10962
10964
10965
10966
10967-1
10967-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
10967-3
10968
10972-1
10972-3
10972-4
10972-5
10973
10977
10979
10980
ISO
ISO
10981
10983
ISO
ISO
ISO
ISO
ISO
10985
10990-4
10990-5
10993-1
10993-2
Hydraulic Fluid Power - Gas-Loaded Accumulators with Separator - Selection of Preferred Hydraulic Ports First Edition
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Determination of the Resistance to
Chemical Attack from the Inside of a Section in a Deflected Condition First Edition
Aerospace - End-Fittings and Turnbarrels for Aircraft Control Wire Rope - Technical Specification First Edition
Information and Documentation - International Standard Music Number (ISMN) First Edition
Snowboards - Binding Mounting Area - Part 1: Requirements and Test Methods for Snowboards without Inserts First Edition
Snowboards - Binding Mounting Area - Part 2: Requirements and Test Methods for Snowboards with Inserts Second Edition
Aerospace - MJ Threads - Gauging First Edition
Rubber and Plastics Hoses - Assessment of Ozone Resistance Under Dynamic Conditions First Edition CEN EN ISO 10 960: 1996
Securities and Related Financial Instruments - Classification of Financial Instruments (CFI Code) Second Edition
Adhesives - Determination of Torque Strength of Anaerobic Adhesives on Threaded Fasteners First Edition
Textile Floor Coverings - Determination of Electrical Resistance First Edition; Technical Corrigendum 1: 10/15/1999
Sports and recreational equipment Fabrics for awnings and camping tents Specification Second edition
Information Technology - Language Independent Arithmetric - Part 1: Integer and Floating Point Arithmetic First Edition
Information Technology - Language Independent Arithmetric - Part 2: Elementary Numerical Functions First Edition
Information technology Language independent arithmetic Part 3: Complex integer and floating point arithmetic and complex
elementary numerical functions First Edition
Earth-Moving Machinery - Operator s Controls Second Edition
Cranes - Requirements for Mechanisms - Part 1: General First Edition
Cranes Requirements for mechanisms Part 3: Tower cranes First Edition
Cranes ù Requirements for mechanisms ù Part 4: Jib cranes First Edition
Cranes Requirements for mechanisms Part 5: Bridge and gantry cranes First Edition
Cranes - Spare Parts Manual First Edition
Photography - Processed Photographic Colour Films and Paper Prints - Methods for Measuring Image Stability First Edition
Identification of Fuel Assemblies for Nuclear Power Reactors First Edition
Validation of the Strength of Reference Solutions Used for Measuring Concentrations First Edition
Nuclear fuel technology Determination of uranium in reprocessing-plant dissolver solution Liquid chromatography method Second
Edition
Timber Structures - Solid Timber Finger-Jointing - Production Requirements First Edition
Caps Made of Aluminium-Plastics Combinations for Infusion Bottles and Injection Vials - Requirements and Test Methods Second
Edition
Animal (Mammal) Traps - Part 4: Methods for Testing Killing-Trap Systems Used on Land or Underwater First Edition
Animal (Mammal) Traps - Part 5: Methods for Testing Restraining Traps First Edition
Biological Evaluation of Medical Devices - Part 1: Evaluation and Testing Third Edition
Biological evaluation of medical devices Part 2: Animal welfare requirements Second Edition
ISO
10993-3
Biological evaluation of medical devices Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity Second Edition
ISO
ISO
ISO
ISO
10993-4 AMD 1
10993-4
10993-5
10993-6
Biological evaluation of medical devices ù Part 4: Selection of tests for interactions with blood AMENDMENT 1 Second Edition
Biological Evaluation of Medical Devices - Part 4: Selection of Tests for Interactions with Blood Second Edition
Biological Evaluation of Medical Devices - Part 5: Tests for In Vitro Cytotoxicity Second Edition
Biological evaluation of medical devices ù Part 6: Tests for local effects after implantation Second Edition
ISO
10993-7
ISO
10993-9
ISO
DIS 10993-9
ISO
ISO
ISO
10993-10 AMD 1
10993-10
10993-11
ISO
10993-12
ISO
10993-13
ISO
10993-14
ISO
10993-15
Biological evaluation of medical devices ù Part 9: Framework for identification and quantification of potential degradation products
Biological evaluation of medical devices ù Part 10: Tests for irritation and delayed-type hypersensitivity AMENDMENT 1 Second
Edition
Biological evaluation of medical devices ù Part 10: Tests for irritation and delayed-type hypersensitivity Second Edition
Biological evaluation of medical devices Part 11: Tests for systemic toxicity Second Edition
Biological Evaluation of Medical Devices - Part 12: Sample Preparation and Reference Materials Second Edition; Corrected Version
06/01/2003
Biological Evaluation of Medical Devices - Part 13: Identification and Quantification of Degradation Products from Polymeric Medical
Devices First Edition
Biological Evaluation of Medical Devices - Part 14: Identification and Quantification of Degradation Products from Ceramics First
Edition
Biological Evaluation of Medical Devices - Part 15: Identification and Quantification of Degradation Products from Metals and Alloys
First Edition; Corrected and Reprinted: 4/01/2001
ISO
10993-16
Biological Evaluation of Medical Devices - Part 16: Toxicokinetic Study Design for Degradation Products and Leachables First Edition
ISO
ISO
10993-17
10993-18
ISO
ISO
ISO
ISO
ISO
10994
10996
10997
10998
11001-1
Biological Evaluation of Medical Devices - Part 17: Establishment of Allowable Limits for Leachable Substances First Edition
Biological evaluation of medical devices Part 18: Chemical characterization of materials First Edition
Information Technology - Data Interchange on 90 mm Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 31
831 ftprad on 80 Tracks on Each Side - ISO Type 303 First Edition
Photography - Still-Picture Projectors - Determination of Noise Emissions First Edition
Passenger Vehicles - Side Impact with Deformable Moving Barrier - Full Scale Test First Edition
Agricultural Wheeled Tractors - Steering Requirements First Edition
Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 1: U-Frame Coupler First Edition
Biological Evaluation of Medical Devices - Part 7: Ethylene Oxide Sterilization Residuals First Edition; (CEN EN ISO 10993-7: 1995)
Biological Evaluation of Medical Devices - Part 9: Framework for Identification and Quantification of Potential Degradation Products
First Edition
ISO
ISO
ISO
11001-2
11001-3
11001-4
ISO
11003-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11003-2
11007
11009
11014-1
11016
11019
11020
11021
ISO
11023
ISO
11024-1
ISO
11024-2
ISO
11025
ISO
11027
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11035
11036
11037
11040-1
11040-2
11040-3
11040-4
11040-5
ISO
ISO
11041
11042-1
Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 2: A-Frame Coupler First Edition
Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 3: Link Coupler First Edition
Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 4: Bar Coupler
Adhesives - Determination of Shear Behaviour of Structural Adhesives - Part 1: Torsion Test Method Using Butt-Bonded Hollow
Cylinders Second Edition
Adhesives - Determination of Shear Behaviour of Structural Adhesives - Part 2: Tensile-Test Method Using Thick Adherends Second
Edition
Petroleum Products and Lubricants - Determination of Rust-Prevention Characteristics of Lubricating Greases First Edition
Petroleum Products and Lubricants - Determination of Water Washout Characteristics of Lubricating Greases First Edition
Safety Data Sheet for Chemical Products - Part 1: Content and Order of Sections First Edition
Oil of Star Anise, Chinese Type (Illicium Verum Hook. F.) First Edition
Oil of Roots of Lovage (Levisticum Officinale Koch) First Edition
Oil of Turpentine, Iberian Type (Pinus Pinaster Sol.) First Edition
Essential Oils - Determination of Water Content - Karl Fischer Method First Edition
Liquorice Extracts (Glycyrrhiza glabra L.) - Determination of Glycyrrhizic Acid Content - Method Using High-Performance Liquid
Chromatography First Edition
Essential Oils - General Guidance on Chromatographic Profiles - Part 1: Preparation of Chromatographic Profiles for Presentation in
Standards First Edition
Essential Oils - General Guidance on Chromatographic Profiles - Part 2: Utilization of Chromatographic Profiles of Samples of
Essential Oils First Edition
Oil of Cassia, Chinese Type - Determination of Trans-Cinnamaldehyde Content - Gas Chromatographic Method on Capillary
Columns First Edition
Pepper and Pepper Oleoresins - Determination of Pipeline Content - Method Using High-Performance Liquid Chromatography First
Edition
Sensory Analysis - Identification and Selection of Descriptors for Establishing a Sensory Profile by a Multidimensional Approach First
Edition
Sensory Analysis - Methodology - Texture Profile First Edition
Sensory Analysis - General Guidance and Test Method for Assessment of the Colour of Foods First Edition
Prefilled Syringes - Part 1: Glass Cylinders for Dental Local Anaesthetic Cartridges First Edition
Prefilled Syringes - Part 2: Plungers and Discs for Dental Local Anaesthetic Cartridges First Edition
Prefilled Syringes - Part 3: Aluminium Caps for Dental Local Anaesthetic Cartridges First Edition
Prefilled syringes ù Part 4: Glass barrels for injectables Second Edition
Prefilled Syringes - Part 5: Plungers for Injectables Second Edition
Workplace Air - Determination of Particulate Arsenic and Arsenic Compounds and Arsenic Trioxide Vapour - Method by Hydride
Generation and Atomic Absorption Spectrometry First Edition
Gas Turbines - Exhaust Gas Emission - Part 1: Measurement and Evaluation First Edition
ISO
ISO
11042-2
11043
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11047
11048
11050
11051
11052
11054
11055
11056
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11058
11064-1
11064-2
11064-3
11064-6
11064-7
11070
11072
ISO
11073-20101
ISO
11073-30200
ISO
ISO
11073-30300
11074-1
ISO
11074-2
ISO
11074-4
ISO
ISO
ISO
ISO
11074 CORR 1
11074
11075
11076
Gas Turbines - Exhaust Gas Emission - Part 2: Automated Emission Monitoring First Edition
Oil of Basil, Methyl Chavicol Type (Ocimum Basilicum L.) First Edition
Soil Quality - Determination of Cadmium, Cobalt, Copper, Lead, Manganese, Nickel and Zinc in Aqua Regia Extracts of Soil - Flame
and Electrothermal Atomic Absorption Spectrometric Methods First Edition
Soil Quality - Determination of Water-Soluble and Acid-Soluble Sulfate First Edition
Wheat Flour and Durum Wheat Semolina - Determination of Impurities of Animal Origin First Edition
Durum Wheat (Triticum Durum Desf.) - Specification First Edition
Durum Wheat Flour and Semolina - Determination of Yellow Pigment Content First Edition
Cutting tools - Designation of high-speed steel groups Second Edition
Flywheels for Reciprocating Internal Combustion Engines - Installation Dimensions for Clutches First Edition
Sensory Analysis - Methodology - Magnitude Estimation Method First Edition
Geotextiles and Geotextile-Related Products - Determination of Water Permeability Characteristics Normal to the Plane, Without
Load First Edition
Ergonomic Design of Control Centres - Part 1: Principles for the Design of Control Centres First Edition
Ergonomic Design of Control Centres - Part 2: Principles for the Arrangement of Control Suites First Edition
Ergonomic Design of Control Centres - Part 3: Control Room Layout First Edition; Technical Corrigendum 1: 02/01/2002
Ergonomic design of control centres Part 6: Environmental requirements for control centres First Edition
Ergonomic design of control centres Part 7: Principles for the evaluation of control centres First Edition
Sterile Single-Use Intravascular Catheter Introducers First Edition
Information Technology - Computer Graphics - Computer Graphics Reference Model First Edition
Health informatics Point-of-care medical device communication Part 20101: Application profiles Base standard First Edition; CoCopyrighted by IEEE
Health informatics Point-of-care medical device communication Part 30200: Transport profile Cable connected First Edition; CoCopyrighted by IEEE
Health informatics Point-of-care medical device communication Part 30300: Transport profile Infrared wireless First Edition; CoCopyrighted by IEEE
Soil Quality - Vocabulary Part 1: Terms and Definitions Relating to the Protection and Pollution of the Soil First Edition
Soil Quality - Vocabulary - Part 2: Terms and Definitions Relating to Sampling Qualite Du Sol - Vocabulaire - Partie 2: Termes Et
Definitions Relatifs A L'Echantillonnage First Edition
Soil Quality - Vocabulary - Part 4: Terms and Definitions Related to the Rehabilitation of Soils and Sites Qualite Du Sol - Vocabulaire Partie 4: Termes Et Definitions Relatifs A La Rehabilitation Des Sols Et Sites First Edition
Soil quality ù Vocabulary TECHNICAL CORRIGENDUM 1 QualitÚ du sol ù Vocabulaire RECTIFICATIF TECHNIQUE 1 First Edition;
Technical Corrigendum 1: 9/15/2006
Soil quality ù Vocabulary QualitÚ du sol ù Vocabulaire First Edition
Aircraft ù De-icing/anti-icing fluids ù ISO type I Second edition
Aircraft Ground-based de-icing/antiicing methods with fluids Fourth Edition
ISO
ISO
ISO
ISO
11077
11078
11082
11083
ISO
11084-1
ISO
ISO
ISO
ISO
ISO
11084-2
11086
11087
11088
11089
ISO
11090-1
ISO
ISO
11090-2
11091
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11092
11093-1
11093-2
11093-3
11093-4
11093-5
11093-6
11093-7
ISO
ISO
11093-8
11093-9
ISO
ISO
ISO
11094
11095
11096
ISO
11102-1
Aerospace - Self- Propelled De-Icing/ Anti-Icing Vehicles - Functional Requirements First Edition
Aircraft ù De-icing/anti-icing fluids ù ISO types II, III and IV Second edition
Certification Scheme for Welded Fabric for the Reinforcement of Concrete Structures First Edition
Water Quality - Determination of Chromium(VI) - Spectrometric Method Using 1,5-Diphenyl- carbazide First Edition
Graphic Technology - Register Systems for Photographic Materials, Foils and Paper - Part 1: Three-Pin Systems First Edition
Graphic technology Register systems for photographic materials, foils and paper Part 2: Register pin systems for plate making First
Edition
Gas Turbines - Vocabulary First Edition
Alpine ski-bindings Retention devices Requirements and test methods Second Edition
Assembly, adjustment and inspection of an alpine ski/binding/boot (SûBûB) system Fourth Edition
Rubber, Raw Synthetic - Determination of Anti-Degradants by High-Performance Liquid Chromatography First Edition
Machine Tools - Test Conditions for Die Sinking Electro-Discharge Machines (EDM) - Terminology and Testing of Accuracy - Part 1:
Single Column Machines (Cross Slide Table Type and Fixed Table Type) First Edition
Machine Tools - Test Conditions for Die Sinking Electro-Discharge Machines (EDM) - Terminology and Testing of Accuracy - Part 2:
Two Column Machines (Slide-Head Type and Cross-Slide Table Type) First Edition
Construction Drawings - Landscape Drawing Practice First Edition
Textiles - Physiological Effects - Measurement of Thermal and Water-Vapour Resistance under Steady-State Conditions (Sweating
Guarded-Hotplate Test) First Edition; (CEN EN 31092:1993)
Paper and Board - Testing of Cores - Part 1: Sampling First Edition
Paper and Board - Testing of Cores - Part 2: Conditioning of Test Samples First Edition
Paper and Board - Testing of Cores - Part 3: Determination of Moisture Content Using the Oven Drying Method First Edition
Paper and Board - Testing of Cores - Part 4: Measurement of Dimensions First Edition
Paper and Board - Testing of Cores - Part 5: Determination of Characteristics of Concentric Rotation First Edition
Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method Second edition
Paper and Board - Testing of Cores - Part 7: Determination of Flexural Modulus by the Three-Point Method First Edition
Paper and Board - Testing of Cores - Part 8: Determination of Natural Frequency and Flexural Modulus by Experimental Modal
Analysis First Edition
Paper and board Testing of cores Part 9: Determination of flat crush resistance Second Edition
Acoustics - Test Code for the Measurement of Airborne Noise Emitted by Power Lawn Mowers, Lawn Tractors, Lawn and Garden
Tractors, Professional Mowers, and Lawn and Garden Tractors with Mowing Attachments First Edition
Linear Calibration Using Reference Materials First Edition
Road Vehicles Pedestrian Protection Impact Test Method for Pedestrian Thigh, Leg and Knee First Edition
Reciprocating Internal Combustion Engines - Handle Starting Equipment - Part 1: Safety Requirements and Tests First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11102-2
11103
11104
11105
11106-1
11106-2
11108
ISO
11110
ISO
11111-1
ISO
11111-2
ISO
11111-3
ISO
11111-4
ISO
11111-5
ISO
11111-6
ISO
ISO
11111-7
11112
ISO
11114-1
ISO
11114-2
ISO
11114-3
ISO
ISO
ISO
11114-4
11116-1
11116-2
Reciprocating Internal Combustion Engines - Handle Starting Equipment - Part 2: Method of Testing the Angle of Disengagement
First Edition
Space Data and Information Transfer Systems - Radio Metric and Orbit Data First Edition
Space Data and Information Transfer Systems - Time Code Formats First Edition Second Edition
Small Craft - Ventilation of Petrol Engine and/or Petrol Tank Compartments Second Edition
Photography - Slide Trays for Projectors - Part 1: Straight Slide Tray, Open Type (European Design) First Edition
Photography - Slide Trays for Projectors - Part 2: Straight Slide Tray, Closed Type (Japanese Design) First Edition
Information and Documentation - Archival Paper - Requirements for Permanence and Durability First Edition
Winter-Sports Equipment - Test Devices for the Setting of the Functional Unit Ski/Boot/Binding - Requirements and Tests First Edition
Textile machinery Safety requirements Part 1: Common requirements First Edition; ISO 11111-1 together with ISO 11111-2 , -3, -4, 5, -6, cancels and replaces ISO 11111:1995
Textile machinery Safety requirements Part 2: Spinning preparatory and spinning machines First Edition; ISO 11111-2 together with
ISO 11111-1 , -3, -4, -5, -6, and -7, cancels and replaces ISO 11111:1995
Textile machinery Safety requirements Part 3: Nonwoven machinery First Edition; ISO 11111-3 together with ISO 11111-1 , -2, -4, 5, -6, and -7, cancels and replaces ISO 11111:1995
Textile machinery Safety requirements Part 4: Yarn processing, cordage and rope manufacturing machinery First Edition; ISO
11111-3 together with ISO 11111-1 , -2, -3, -5, -6, and -7, cancels and replaces ISO 11111:1995
Textile machinery Safety requirements Part 5: Preparatory machinery to weaving and knitting MatÚriel pour l industrie textile First
Edition; ISO 11111-5 together with ISO 11111-1 , -2, -3, -4, -6, and -7, cancels and replaces ISO 11111:1995
Textile machinery Safety requirements Part 6: Fabric manufacturing machinery First Edition; ISO 11111-6 together with ISO 11111-1
, -2, -3, -4, -5, and -7, cancels and replaces ISO 11111:1995
Textile machinery Safety requirements Part 7: Dyeing and finishing machinery First edition; ISO 11111-7 together with ISO 11111-1, 2, -3, -4, -5, and -6 Cancels and Replaces ISO 11111:1995
Earth-Moving Machinery - Operator s Seat - Dimensions and Requirements First Edition; Amendment 1: 03/01/2001
Transportable Gas Cylinders - Compatibilty of Cylinder and Valve Materials with Gas Contents - Part 1: Metallic Materials First
Edition; Corrected and Reprinted 08/01/1999
Transportable Gas Cylinders - Compatibilty of Cylinder and Valve Materials with Gas Contents - Part 2: Non-Metallic Materials First
Edition
Transportable Gas Cylinders - Compatibilty of Cylinder and Valve Materials with Gas Contents - Part 3: Autogenous Ignition Test in
Oxygen Atmosphere First Edition; Corrected and Reprinted 08/01/1999
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting
metallic materials resistant to hydrogen embrittlement First Edition
Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 1: Specification First Edition
Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 2: Inspection Gauges First Edition
ISO
ISO
11117
11118
ISO
11119-1
ISO
11119-2
ISO
11119-3
ISO
11120
ISO
11124-1
ISO
11124-2
ISO
11124-3
ISO
11124-4
ISO
11125-1
ISO
11125-2
ISO
11125-3
ISO
11125-4
ISO
11125-5
ISO
11125-6
ISO
11125-7
ISO
11126-1
Gas Cylinders - Valve Protection Caps and Valve Guards for Industrial and Medical Gas Cylinders - Design, Construction and Tests
First Edition
Gas Cylinders - Non-Refillable Metallic Gas Cylinders - Specification and Test Methods First Edition
Gas Cylinders of Composite Construction - Specification and Test Methods - Part 1: Hoop Wrapped Composite Gas Cylinders First
Edition
Gas Cylinders of Composite Construction - Specification and Test Methods - Part 2: Fully Wrapped Fibre Reinforced Composite Gas
Cylinders With Load-Sharing Metal Liners
Gas Cylinders of Composite Construction - Specification and Test Methods - Part 3: Fully Wrapped Fibre Reinforced Composite Gas
Cylinders with Non-Load-Sharing Metallic or Non-Metallic Liners First Edition
Gas Cylinders - Refillable Seamless Steel Tubes of Water Capacity between 150 I and 3 000 I - Design, Construction and Testing
First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning
Abrasives - Part 1: General Introduction and Classification First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning
Abrasives - Part 2: Chilled-Iron Grit First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning
Abrasives - Part 3: High-Carbon Cast-Steel Shot and Grit First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning
Abrasives - Part 4: Low-Carbon Cast-Steel Shot First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
Abrasives - Part 1: Sampling First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
Abrasives - Part 2: Determination of Partical Size Distribution First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
Abrasives - Part 3: Determination of Hardness First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
Abrasives - Part 4: Determination of Apparent Density First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
Abrasives - Part 5: Determination of Percentage Defective Particles and of Microstructure First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
Abrasives - Part 6: Determination of Foreign Matter First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
Abrasives - Part 7: Determination of Moisture First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning
Abrasives - Part 1: General Introduction and Classification First Edition; Corrigendum 1-1997, Corrigendum 2-1997
ISO
11126-3
ISO
11126-4
ISO
11126-5
ISO
11126-6
ISO
11126-7
ISO
11126-8
ISO
11126-9
ISO
11126-10
ISO
11127-1
ISO
11127-2
ISO
11127-3
ISO
11127-4
ISO
11127-5
ISO
11127-6
ISO
ISO
11127-7
11130
ISO
11135
ISO
11135-1
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning
Abrasives - Part 3: Copper Refinery Slag First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning
Abrasives - Part 4: Coal Furnace Slag First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning
Abrasives - Part 5: Nickel Refinery Slag First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning
Abrasives - Part 6: Iron Furnace Slag First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning
Abrasives - Part 7: Fused Aluminium Oxide First Edition; Technical Corrigendum: 02-15-1999
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning
Abrasives - Part 8: Olivine Sand First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning
Abrasives - Part 9: Staurolite First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning
Abrasives - Part 10: Almandite Garnet First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
Abrasives - Part 1: Sampling First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
Abrasives - Part 2: Determination of Particle Distribution First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
Abrasives - Part 3: Determination of Apparent Density First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
Abrasives - Part 4: Assessment of Hardness by a Glass Slide Test First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
Abrasives - Part 5: Determination of Moisture First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
Abrasives - Part 6: Determination of Water- Soluble Contaminants by Conductivity Measurement First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
Abrasives - Part 7: Determination of Water- Soluble Chlorides First Edition
Corrosion of Metals and Alloys - Alternate Immersion Test in Salt Solution First Edition
Medical Devices - Validation and Routine Control of Ethylene Oxide Sterilization First Edition; Corrigendum 1: 1994 [Refer To: AAMI
TIR28]
Sterilization of health care products ù Ethylene oxide ù Part 1: Requirements for development, validation and routine control of a
sterilization process for medical devices First Edition
ISO
11137-1
ISO
11137-2
ISO
ISO
11137-3
11138-1
ISO
11138-2
ISO
11138-3
ISO
11138-4
ISO
ISO
ISO
11138-5
11140-1
11140-2
ISO
11140-3
ISO
11140-4
ISO
11140-5
ISO
ISO
ISO
11142
11143
11144
ISO
11145
ISO
11146-1
ISO
11146-2
ISO
11151-1
Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization
process for medical devices First Edition; Together with ISO 11137-2 and ISO 11137-3 supersedes ISO 11137:1995
Sterilization of health care products Radiation Part 2: Establishing the sterilization dose First Edition; Together with ISO 11137-1 and
ISO 11137-3 supersedes ISO 11137:1995
Sterilization of health care products Radiation Part 3: Guidance on dosimetric aspects First Edition; Together with ISO 11137-1 and
ISO 11137-2 supersedes ISO 11137:1995
Sterilization of health care products Biological indicators Part 1: General requirements Second Edition
Sterilization of health care products Biological indicators Part 2: Biological indicators for ethylene oxide sterilization processes
Second Edition
Sterilization of health care products Biological indicators Part 3: Biological indicators for moist heat sterilization processes Second
Edition
Sterilization of health care products Biological indicators Part 4: Biological indicators for dry heat sterilization processes First Edition
Sterilization of health care products Biological indicators Part 5: Biological indicators for low-temperature steam and formaldehyde
sterilization processes First Edition
Sterilization of health care products - Chemical indicators Part 1: General requirements Second Edition
Sterilization of Health Care Products - Chemical Indicators - Part 2: Test Equipment and Methods First Edition
Sterilization of health care products ù Chemical indicators ù Part 3: Class 2 indicator systems for use in the Bowie and Dick-type
steam penetration test Second Edition
Sterilization of health care products ù Chemical indicators ù Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type
test for detection of steam penetration Second Edition
Sterilization of health care products ù Chemical indicators ù Part 5: Class 2 indicators for Bowie and Dicktype air removal tests
Second Edition
Micrographics Colour microfilm Application of the exposure technique to prepare line originals and continuous-tone originals First
Edition
Dental Equipment - Amalgam Separators First Edition: Corrigendum 6/15/2002
Dental Equipment - Connections for Supply and Waste Lines First Edition
Optics and photonics Lasers and laser-related equipment Vocabulary and symbols Optique et photonique Lasers et Úquipements
associÚs aux lasers Vocabulaire et symboles Third Edition
Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 1:
Stigmatic and simple astigmatic beams First Edition; Cancels and Replaces 11146:1999
Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 2:
General astigmatic beams First edition
Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared
Spectral Ranges First Edition
ISO
ISO
11151-2
11157
ISO
11158
ISO
11159
ISO
11160-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11160-2
11161
11162
11163
11164
11165
11168
ISO
ISO
ISO
11169
11170
11171
ISO
11172-1
ISO
11172-2
ISO
11172-3
ISO
11172-4 CORR 1
ISO
ISO
11172-4
11173
ISO
11174
Lasers and Laser-Related Equipment - Standard Optical Components - Part 2: Components for the Infrared Spectral Ranges First
Edition
Road vehicles - Brake lining assemblies - Inertia dynamometer test method Second Edition
Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HH, HL, HM,
HR, HV and HG First Edition
Information Technology - Office Equipment - Minimum Information to Be Included in Specification Sheets - Copying Machines
Second Edition; Corrected and Reprinted 03/01/1997
Information Technology - Office Equipment - Minimum Information to Be Included in Specification Sheets - Printers - Part 1: Class 1
and Class 2 Printers First Edition
Information Technology - Office Equipment - Minimum Information to Be Included in Specification Sheets - Printers - Part 2: Class 3
and Class 4 Printers First Edition
Safety of machinery ù Integrated manufacturing systems ù Basic requirements SECOND EDITION
Peppercorns (Piper Nigrum L.) in Brine - Specification and Test Methods First Edition
Dried Sweet Basil (Ocimum Basilicum L.) - Specification First Edition
Dried Rosemary (Rosmarinus Officinalis L.) - Specification First Edition
Dried Sage (Salvia Officinalis L.) - Specification First Edition
Socket Wrenches for Spark- and Glow-Plugs First Edition
Machinery for Forestry - Wheeled Special Machines - Vocabulary, Performance Test Methods and Criteria for Brake Systems First
Edition
Hydraulic fluid power Filter elements Sequence of tests for verifying performance characteristics Second edition
Hydraulic Fluid Power - Calibration of Automatic Particle Counters for Liquids First Edition; Corrigendum 1: 10/1/2001
Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part
1: Systems First Edition; CEN EN ISO/IEC 11172-1: 1995; AS/NZS 4230.1: 1994; Corrigendum 1: 1996; Corrigendum 2: 1999
Information technology Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s Part 2:
Video First Edition; Corrigendum 1: 4/15/1996; Corrigendum 2: 12/1/1999; Corrigendum 3: 11/1/2003; Corrigendum 4: 08/15/2006
Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part
3: Audio First Edition; CEN EN ISO/IEC 11172-3 1995; AS/NZS 4230.3: 1994; Corrigendum 1: 1996
Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part
4: Compliance Testing
Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part
4: Compliance Testing First Edition
Thermoplastics Pipes - Determination of Resistance to External Blows - Staircase Method First Edition
Workplace Air - Determination of Particulate Cadmium and Cadmium Compounds - Flame and Electrothermal Atomic Absorption
Spectrometric Method First Edition
ISO
ISO
ISO
11178
11179-1
11179-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11179-3 CORR 1
11179-3
11179-4
11179-5
11179-6
11191
11192
ISO
11193-1 AMD 1
ISO
11193-1 CORR 1
ISO
11193-1
ISO
ISO
ISO
ISO
ISO
ISO
11193-2
11195
11197
11199-1
11199-2
11199-3
ISO
11200
ISO
11201
ISO
11202
ISO
11203
Star Anise (Llicium verum Hook. f.) - Specification First Edition
Information technology Metadata registries (MDR) Part 1: Framework Second Edition
Information technology Metadata registries (MDR) Part 2: Classification Second Edition
Information technology ù Metadata registries (MDR) ù Part 3: Registry metamodel and basic attributes TECHNICAL CORRIGENDUM
1 Second Edition
Information Technology - Metadata Registries (MDR) - Part 3: Registry Metamodel and Basic Attributes Second Edition
Information technology Metadata registries (MDR) Part 4: Formulation of data definitions Second Edition
Information technology Metadata registries (MDR) Part 5: Naming and identification principles Second Edition
Information technology Metadata registries (MDR) Part 6: Registration Second Edition
Gas Cylinders - 25E Taper Thread for Connection of Valves to Gas Cylinders - Inspection Gauges First Edition
Small craft - Graphical symbols First Edition
Single-use medical examination gloves ù Part 1: Specification for gloves made from rubber latex or rubber solution AMENDMENT 1
First Edition
Single-use medical examination gloves ù Part 1: Specification for gloves made from rubber latex or rubber solution TECHNICAL
CORRIGENDUM 1 First Edition
Single-use medical examination gloves ù Part 1: Specification for gloves made from rubber latex or rubber solution First Edition
Single-use medical examination gloves Part 2: Specification for gloves made from poly(vinyl chloride) First Edition; Cancels and
Replaces ISO 11193:1994
Gas Mixers for Medical Use - Stand-Alone Gas Mixers First Edition
Medical supply units Second Edition
Walking Aids Manipulated by Both Arms - Requirements and Test Methods - Part 1: Walking Frames First Edition
Walking Aids Manipulated by Both Arms - Requirements and Test Methods - Part 2: Rollators Second edition
Walking aids manipulated by both arms Requirements and test methods Part 3: Walking tables First Edition
Acoustics - Noise Emitted by Machinery and Equipment - Guidelines for the Use of Basic Standards for the Determination of
Emission Sound Pressure Levels at a Work Station and at Other Specified Positions First Edition; CEN EN ISO 11200: 1995;
Corrigendum 1 02/01/1997
Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at
Other Specified Positions - Engineering Method in an Essentially Free Field Over a Reflecting Plane First Edition; Replaces ISO
6081; CEN EN ISO 11201-95; Corrigendum 1 02/15/1997
Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at
Other Specified Positions - Survey Method in Situ First Edition (CEN EN ISO 11202: 1995)
Acoustics - Noise Emitted by Machinery and Equipment - Determination of Emission Sound Pressure Levels at a Work Station and at
Other Specified Positions from the Sound Power Level (CEN EN ISO 11204: 1995)
ISO
11204
ISO
11205
ISO
11210
ISO
11212-1
ISO
11212-2
ISO
11212-3
ISO
ISO
ISO
11212-4
11213
11214
ISO
ISO
ISO
ISO
ISO
11215
11216
11217
11218
11222
ISO
11223
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11224
11226
11228-1
11228-2
11228-3
11234
11235
ISO
11236
Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at
Other Specified Positions - Method Requiring Environmental Corrections First Edition; CEN EN ISO 11204:1995; Corrigendum 1
02/15/1997
Acoustics Noise emitted by machinery and equipment Engineering method for the determination of emission sound pressure levels
in situ at the work station and at other specified positions using sound intensity First Edition
Determination of Platinum Jewellery Alloys - Gravimetric Method After Precipitation of Diammonium Hexachloroplatinate First Edition
Starch and Derived Products - Heavy Metals Content - Part 1: Determination of Arsenic Content by Atomic Absorption Spectrometry
First Edition
Starch and Derived Products - Heavy Metals Content - Part 2: Determination of Mercury Content by Atomic Absorption Spectrometry
First Edition
Starch and Derived Products - Heavy Metals Content - Part 3: Determination of Lead Content by Atomic Absorption Spectrometry
with Electrothermal Atomization First Edition
Starch and Derived Products - Heavy Metals Content - Part 4: Determination of Cadmium Content by Atomic Absorption
Spectrometry with Electrothermal Atomization First Edition; Corrigendum 1 09-15-1997
Modified Starch - Determination of Acetyl Content - Enzymatic Method First Edition; (EN ISO 11213:1995)
Modified Starch - Determination of Carboxyl Group Content of Oxidized Starch First Edition CEN EN ISO 11 214: 1996
Modified Starch - Determination of Adipic Acid Content of Acetylated Di-Starch Adipates - Gas Chromaographic Method First Edition
Modified Starch - Determination of Content of Carboxymethyl Groups in Carboxymethyl Starch First Edition
Aerospace - Hydraulic System Fluid Contamination - Location of Sampling Points and Criteria for Sampling First Edition
Aerospace - Cleanliness Classification for Hydraulic Fluids First Edition
Air quality Determination of the uncertainty of the time average of air quality measurements First Edition
Petroleum and liquid petroleum products Direct static measurements Measurement of content of vertical storage tanks by
hydrostatic tank gauging First Edition
Textiles - Web Formation and Bonding in Nonwovens - Vocabulary Textiles - Formation et Liage du Voile Dans les Nontisses Vocabulaire Second Edition
Ergonomics Evaluation of static working postures First Edition; Technical Corrigendum 1: 05/01/2006
Ergonomics Manual handling Part 1: Lifting and carrying First Edition
Ergonomics ù Manual handling ù Part 2: Pushing and pulling First Edition
Ergonomics ù Manual handling ù Part 3: Handling of low loads at high frequency First Edition
Rubber Compounding Ingredients - Carbon Black (Pelletized) - Determination of Dust Content First Edition
Rubber Compounding Ingredients - Sulfenamide Accelerators - Test Methods First Edition
Rubber compounding ingredients - p-Phenylenediamine (PPD) antidegradants - Test methods First Edition; Technical Corrigendum
1: 02/15/2006
Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based
fluid applications First Edition
Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 2: Waterbased fluid applications First Edition
Aircraft - Aircraft Engine Transport Devices First Edition
Aircraft - Pressure Equalization Requirements for Cargo Containers First Edition
Cycles - Luggage Carriers for Bicycles - Concepts, Classification and Testing First Edition
Plastics - Thermosetting Moulding Materials - Evaluation of Short-Term Performance at Elevated Temperatures First Edition
Lasers and Laser-Related Equipment - Laser Device - Minimum Requirements for Documentation Second Edition
Lasers and Laser-Related Equipment - Determination of Laser-Induced Damage Threshold of Optical Surfaces - Part 1: 1-on-1 Test
First Edition
Lasers and Laser-Related Equipment - Determination of Laser-Induced Damage Threshold of Optical Surfaces - Part 2: S-on-1 Test
First Edition
Lasers and laser-related equipment Determination of laser-induced damage threshold of optical surfaces Part 3: Assurance of laser
power (energy) handling capabilities First Edition
Iron Ore Pellets - Determination of Clustering of Feedstock for Direct Reduction by Gas Reforming Processes First Edition
Iron Ores - Determination of Disintegration and Metallization of Feedstock for Direct Reduction by Gas Reforming Processes First
Edition
Iron Ores - Determination of Reducibility and Metallization of Feedstock for Direct reduction by Gas Reforming Processes First
Edition
Soil Quality - Simplified Soil Description Qualite Du Sol - Decription Simplifiee Du Sol First Edition
Soil Quality - Determination of Effective Cation Exchange Capacity and Base Saturation Level Using Barium Chloride Solution First
Edition; Corrigendum 1: 1996
Soil Quality - Determination of Total Nitrogen - Modified Kjeldahl Method First Edition
Soil quality Determination of cyanide First Edition
Soil Quality - Determination of Phosphorus - Spectrometric Determination of Phosphorus Soluble in Sodium Hydrogen Carbonate
Solution First Edition
Soil quality Determination of herbicides Method using HPLC with UV-detection First edition
Soil Quality - Determination of the Specific Electrical Conductivity First Edition; Corrigendum 1: 1996
ISO
11237-1
ISO
ISO
ISO
ISO
ISO
ISO
11237-2
11241
11242
11243
11248
11252
ISO
11254-1
ISO
11254-2
ISO
ISO
11254-3
11256
ISO
11257
ISO
ISO
11258
11259
ISO
ISO
ISO
11260
11261
11262
ISO
ISO
ISO
11263
11264
11265
ISO
ISO
11266
11267
ISO
11268-1
Soil Quality - Guidance on Laboratory Testing for Biodegradation of Organic Chemicals in Soil Under Aerobic Conditions First Edition
Soil Quality - Inhibition of Reproduction of Collembola (Folsomia Candida) by Soil Pollutants First Edition
Soil Quality - Effects of Pollutants on Earthworms (Eisenia Fetida) - Part 1: Determination of Acute Toxicity Using Artificial Soil
Substrate First Edition
ISO
11268-2
Soil Quality - Effects of Pollutants on Earthworms (Eisenia Fetida) - Part 2: Determination of Effects on Reproduction First Edition
ISO
11268-3
ISO
11269-1
ISO
ISO
ISO
ISO
11269-2
11271
11272
11274
ISO
ISO
11275
11276
ISO
ISO
ISO
ISO
11277
11285
11286
11289
ISO
11290-1
ISO
11290-2
ISO
11292
ISO
ISO
11294
11303
Soil Quality - Effects of Pollutants on Earthworms - Part 3: Guidance on the Determination of Effects in Field Situations First Edition
Soil Quality - Determination of the Effects of Pollutants on Soil Flora - Part 1: Method for the Measurement of Inhibition of Root
Growth First Edition
Soil quality Determination of the effects of pollutants on soil flora Part 2: Effects of chemicals on the emergence and growth of
higher plants Second Edition
Soil Quality - Determination of Redox Potential - Field Method First Edition
Soil Quality - Determination of Dry Bulk Density First Edition
Soil Quality - Determination of the Water-Retention Characteristics - Laboratory Methods First Edition
Soil quality Determination of unsaturated hydraulic conductivity and water-retention characteristic Wind s evaporation method First
Edition
Soil Quality - Determination of Pore Water Pressure - Tensiometer Method First Edition (BS 7755: SEC 5.1: 1996)
Soil Quality - Determination of Particle Size Distribution in Mineral Soil Material - Method by Sieving and Sedimentation First Edition;
Technical Corrigendum 1: 03/01/2002
Milk Determination of lactulose content Enzymatic method First Edition
Tea Classification of grades by particle size analysis Second Edition
Heat-Processed Foods in Hermetically Sealed Containers - Determination of pH First Edition
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Detection and Enumeration of Listeria Monocytogenes Part 1: Detection Method First Edition; Amendment 1: 10/15/2004
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Detection and Enumeration of Listeria Monocytogenes Part 2: Enumeration Method First Edition; Amendment 1: 10/15/2004
Instant Coffee - Determination of Free and Total Carbohydrate Contents - Method Using High-Performance Anion-Exchange
Chromatography First Edition; Corrected and Reprinted 02-01-1997
Roasted Ground Coffee - Determination of Moisture Content - Method by Determination of Loss in Mass at 103 Degrees C (Routine
Method) First Edition
Corrosion of Metals and Alloys - Guidelines for Selection of Protection Methods Against Atmospheric Corrosion First Edition
ISO
11306
Corrosion of Metals and Alloys - Guidelines for Exposing and Evaluating Metals and Alloys in Surface Sea Water First Edition
ISO
ISO
ISO
11312
11315-1
11315-2
ISO
11318
Cardiac Defibrillators - Connector Assembly DF-1 for Implantable Defibrillators - Dimensional and Test Requirements Second Edition
ISO
11319
Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording First Edition
Photography - Sheets of Sensitized Material for the Pre-Press Industry - Dimensions and Related Requirements Second Edition
Photography - Projection in indoor Rooms - Part 1: Screen Illumination Test for Still Projectors First Edition
Photography - Projection in indoor Rooms - Part 2: Screen Illuminance Test for Still and Video Projection First Edition
ISO
ISO
ISO
11321
11323
11329
ISO
11334-1
ISO
ISO
11334-4
11337
ISO
11338-1
ISO
ISO
11338-2
11339
ISO
11341
ISO
11342
ISO
11343
ISO
ISO
ISO
11344
11345
11346
ISO
11348-1
ISO
11348-2
ISO
ISO
ISO
11348-3
11357-1
11357-2
ISO
ISO
11357-3
11357-4
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DATA/DAT
Format First Edition
Iron Ore and Direct Reduced Iron - Vocabulary Second Edition
Hydrometric Determinations - Measurement of Suspended Sediment Transport in Tidal Channels Second Edition
Assistive products for walking manipulated by one arm ù Requirements and test methods ù Part 1: Elbow crutches Second Edition
Walking Aids Manipulated by One Arm - Requirements and Test Methods - Part 4: Walking Sticks with Three or More Legs First
Edition
Plastics Polyamides Determination of e-caprolactam and w-laurolactam by gas chromatography First Edition
Stationary source emissions Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 1: Sampling First
Edition
Stationary source emissions Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 2: Sample preparation,
clean-up and determination First Edition
Adhesives - T-Peel Test for Flexible-to-Flexible Bonded Assemblies Second Edition
Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation Second
Edition
Mechanical Vibration - Methods and Criteria for the Mechanical Balancing of Flexible Rotors Second Edition; Corrigendum 1: 06-012000
Adhesives - Determination of Dynamic Resistance to Cleavage of High Strength Adhesive Bonds Under Impact Conditions - Wedge
Impact Method Second Edition
Rubber, raw synthetic Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography First
Edition
Rubber Assessment of carbon black and carbon black/silica dispersion Rapid comparative methods Second Edition
Rubber, vulcanized or thermoplastic Estimation of life-time and maximum temperature of use Second Edition
Water Quality - Determination of the Inhibitory Effect of Water Samples on the Light Emission of Vibrio Fischeri (Luminescent
Bacteria Test) - Part 1: Method Using Freshly Prepared Bacteria First Edition
Water Quality - Determination of the Inhibitory Effect of Water Samples on the Light Emission of Vibrio Fischeri (Luminescent
Bacteria Test) - Part 2: Method Using Liquid-Dried Bacteria First Edition
Water Quality - Determination of the Inhibitory Effect of Water Samples on the Light Emission of Vibrio Fischeri (Luminescent
Bacteria Test) - Part 3: Method Using Freeze-Dried Bacteria First Edition
Plastics - Differential Scanning Calorimetry (DSC) - Part 1: General Principles First Edition
Plastics - Differential Scanning Calorimetry (DSC) - Part 2: Determination of Glass Transition Temperature First Edition
Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
First Edition; Amendment 1: 07/2005
Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity First Edition
ISO
11357-5
ISO
ISO
ISO
ISO
ISO
ISO
11357-6 AMD 1
11357-6
11357-7
11358
11358-2
11359-1
ISO
ISO
11359-2
11359-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11369
11372
11375
11377
11378-1
11378-2
11379
11380
11381
ISO
11393-1
ISO
ISO
11393-2
11393-3
ISO
11393-4
ISO
11393-5
ISO
ISO
11393-6
11399
ISO
11400
Plastics - Differential Scanning Calorimetry (DSC) - Part 5: Determination of Characteristic Reaction-Curve Temperatures and Times,
Enthalpy of Reaction and Degree of Conversion First Edition
Plastics ù Differential scanning calorimetry (DSC) ù Part 6: Determination of oxidation induction time AMENDMENT 1 First Edition
Plastics - Differential Scanning Calorimetry (DSC) - Part 6: Determination of Oxidation Induction Time First Edition
Plastics - Differential Scanning Calorimetry (DSC) - Part 7: Determination of Crystallization Kinetics First Edition
Plastics - Thermogravimetry (TG) of Polymers - General Principles First Edition
Plastics Thermogravimetry (TG) of polymers Part 2: Determination of activation energy First Edition
Plastics - Thermomechanical Analysis (TMA) - Part 1: General Principles First Edition
Plastics - Thermomechanical Analysis (TMA) - Part 2: Determination of Coefficient of Linear Thermal Expansion and Glass Transition
Temperature First Edition
Plastics - Thermomechanical Analysis (TMA) - Part 3: Determination of Penetration Temperature First Edition
Water Quality - Determination of Selected Plant Treatment Agents - Method Using High Performance Liquid Chromatography with UV
Detection After Solid-Liquid Extraction First Edition
Gas cylinders Cylinders for dissolved acetylene Inspection at time of filling Second Edition
Building Construction Machinery and Equipment - Terms and Definitions First Edition
Textile Floor Coverings - Floor Soiling - Test Site Set-Up and Soiling Evaluation First Edition
Textile Floor Coverings- Laboratory Soiling Tests - Part 1: Kappasoil Test First Edition
Textile Floor Coverings - Laboratory Soiling Tests - Part 2: Drum Test First Edition
Textile Floor Coverings - Laboratory Cleaning Procedure Using Spray Extraction First Edition
Optics and Optical Instruments - Ophthalmic Optics - Formers First Edition
Optics and Optical Instruments - Ophthalmic Optics - Screw Threads First Edition
Protective Clothing for Users of Hand-Held Chain-Saws - Part 1: Test Rig Driven by a Flywheel for Testing Resistance to Cutting by a
Chain-Saw First Edition
Protective Clothing for Users of Hand-Held Chain-Saws - Part 2: Test Methods and Performance Requirements for Leg Protectors
First Edition
Protective Clothing for Users of Hand-Held Chain-Saws - Part 3: Test Methods for Footwear First Edition
Protective clothing for users of hand-held chain-saws Part 4: Test methods and performance requirements for rotective gloves First
Edition
Protective Clothing for Users of Hand-Held Chain-Saws - Part 5: Test Methods and Performance Requirements for Protective Gaiters
First Edition
Protective clothing for users of hand-held chain-saws ù Part 6: Test methods and performance requirements for upper body
protectors First Edition
Ergonomics of the Thermal Environment - Principles and Application of Relevant International Standards First Edition
Nickel, Ferronickel and Nickel Alloys - Determination of Phosphorus Content - Phosphovanadomolybdate Molecular Absorption
Spectrometric Method First Edition
ISO
ISO
ISO
11401
11402
11403-1
Plastics - Phenolic Resins - Separation by Liquid Chromatography First Edition
Phenolic, amino and condensation resins Determination of free- formaldehyde content Second Edition;
Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 1: Mechanical Properties Second Edition
ISO
11403-2
Plastics Acquisition and presentation of comparable multipoint data Part 2: Thermal and processing properties Second Edition
ISO
11403-3
ISO
ISO
11404
FDIS 11404
ISO
11406
ISO
ISO
11407
11408
Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 3: Environmental Influences on Properties First Edition
Information Technology - Programming Languages, Their Environments and System Software Interfaces - Language-Independent
Datatypes First Edition
Information technology ù General- Purpose Datatypes (GPD)
Commercial Road Vehicles - Mechanical Coupling between Towing Vehicles with Rear-Mounted Coupling and Drawbar Trailers Interchangeability Second Edition; Corrigendum 1: 1/15/2005
Commercial road vehicles Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle
trailers Interchangeability Second Edition
Chemical Conversion Coatings - Black Oxide Coating on Iron and Steel - Specification and Test Methods First Edition
ISO
ISO
ISO
11409
11411
11412
ISO
11413
ISO
ISO
ISO
ISO
ISO
11414
11415
11416
11418-1
11418-2
ISO
ISO
ISO
11418-3
11418-4
11418-5
ISO
ISO
11418-7
11421
Plastics - Phenolic Resins - Determination of Heats and Temperatures of Reaction by Differential Scanning Calorimetry First Edition
Information Technology - Representation for Human Communication of State Transition of Software First Edition
Carbonaceous Materials for the Production of Aluminium - Calcined Coke - Determination of Water Content First Edition
Plastics Pipes and Fittings - Preparation of Test Piece Assemblies between a Polyethylene (PE) Pipe and an Electrofusion Fitting
First Edition
Plastics Pipes and Fittings - Preparation of Polyethylene (PE) Pipe/Pipe or Pipe/ Fitting Test Piece Assemblies by Butt Fusion First
Edition
Tools for Pressing - Die Sets First Edition
Tennis Rackets - Racket Components and Physical Parameters First Edition
Containers and accessories for pharmaceutical preparations Part 1: Drop-dispensing glass bottles Second edition
Containers and accessories for pharmaceutical preparations Part 2: Screw-neck glass bottles for syrups Second edition
Containers and accessories for pharmaceutical preparations Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage
forms Second edition
Containers and accessories for pharmaceutical preparations Part 4: Tablet glass bottles Second edition
Containers and Accessories for Pharmaceutical Preparations - Part 5: Dropper Assemblies First Edition
Containers and Accessories for Pharmaceutical Preparations - Part 7: Screw-Neck Vials Made of Glass Tubing for Liquid Dosage
Forms First Edition
Optics and Optical Instruments - Accuracy of Optical Transfer Function (OTF) Measurement First Edition;
ISO
11423-1
Water Quality - Determination of Benzene and Some Derivatives - Part 1: Head-Space Gas Chromatographic Method First Edition
ISO
ISO
ISO
ISO
11423-2
11424
11425
11426
ISO
ISO
ISO
11427
11428
11429
ISO
ISO
11431
11432
Water Quality - Determination of Benzene and Some Derivatives - Part 2: Method Using Extration and Gas Chromatography First
Edition
Rubber Hoses and Tubing for Air and Vacuum Systems for Internal- Combustion Engines - Specification First Edition
Rubber Hoses and Hose Assemblies for Automobile Power- Steering Systems - Specification First Edition
Determination of Gold in Gold Jewellery Alloys - Cupellation Method (Fire Assay) Second Edition
Determination of Silver in Silver Jewellery Alloys - Volumetric (Potentiometric) Method Using Potassium Bromide (CEN EN
31427:1994); (DINE EN 31427:1995) First Edition; Corrigendum 1: 1994
Ergonomics - Visual Danger Signals - General Requirements, Design and Testing First Edition
Ergonomics - System of Auditory and Visual Danger and Information Signals First Edition
Building Construction - Jointing Products - Determination of Adhesion/Cohesion Properties of Sealants After Exposure to Heat, Water
and Artificial Light Through Glass Second Edition
Building construction - Sealants - Determination of resistance to compression Second Edition
ISO
11433
Nickel Alloys - Determination of Titanium Content - Diantipyrylmethane Molecular Absorption Spectrometric Method First Edition
ISO
11435
Nickel alloys Determination of molybdenum Inductively coupled plasma atomic emission spectrometric method First Edition
ISO
11436
ISO
11437-1
ISO
11437-2
ISO
11438-1
ISO
11438-2
ISO
11438-3
ISO
11438-4
ISO
11438-5
ISO
11438-6
ISO
11438-7
Nickel and Nickel Alloys - Determination of Total Boron Content - Curcumin Molecular Absorption Spectrometric Method First Edition
Nickel Alloys - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 1: General
Requirements and Sample Dissolution First Edition
Nickel Alloys - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 2:
Determination of Lead Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 1: General
Requirements and Sample Dissolution First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 2:
Determination of Lead Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 3:
Determination of Antimony Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 4:
Determination of Tin Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 5:
Determination of Tellurium Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 6:
Determination of Thallium Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 7:
Determination of Silver Content First Edition
ISO
11438-8
ISO
11439
ISO
11441
ISO
ISO
11442
11443
ISO
ISO
ISO
ISO
11446
11448
11449
11450
ISO
11451-1
ISO
11451-2
ISO
11451-3
ISO
11451-4
ISO
11452-1
ISO
11452-2
ISO
11452-3
ISO
11452-4
ISO
11452-5
ISO
11452-7
ISO
11452-8
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 8:
Determination of Indium Content First Edition
Gas Cylinders - High Pressure Cylinders for the On-Board Storage of Natural Gas as a Fuel for Automotive Vehicles First Edition
Lead Sulfide Concentrates - Determination of Lead Content - Back Titration of EDTA After Precipitation of Lead Sulfate First Edition;
(Corrected and Reprinted - 1995) (SAA AS 4030.2: 1996)
Technical product documentation Document management First Edition; Replaces ISO 11442-1 thru ISO 11442-5 and ISO/TR 10623
Plastics - Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers Second edition
Road vehicles Connectors for the electrical connection of towing and towed vehicles 13-pole connectors for vehicles with 12 V
nominal supply voltage Third Edition
Powered Shredders and Chippers - Definitions, Safety Requirements and Test Procedures First Edition
Walk-Behind Powered Rotary Tillers - Definitions, Safety Requirements and Test Procedures First Edition
Equipment for Harvesting and Conservation - Round Balers - Terminology and Commercial Specifications First Edition
Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General
principles and terminology Third edition
Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle
radiation sources Third edition
Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board
transmitter simulation Second Edition
Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk
current injection (BCI) Second Editon
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1:
General principles and terminology Third Edition
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2:
Absorber-lined shielded enclosure Second Edition
Road Vehicles - Component Test Methods for Electrical Disturbances from Narrowband Radiated Electromagnetic Energy - Part 3:
Transverse Electromagnetic (TEM) Cell Second Edition
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk
current injection (BCI) Third edition
Road Vehicles - Component Test Methods for Electrical Disturbances from Narrowband Radiated Electromagnetic Energy - Part 5:
Stripline Second Edition
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 7: Direct
radio frequency (RF) power injection Second Edition
Road vehicles ù Component test methods for electrical disturbances from narrowband radiated electromagnetic energy ù Part 8:
Immunity to magnetic fields First Edition
ISO
ISO
ISO
ISO
ISO
11453
11455
11458
11459
11460
ISO
ISO
ISO
ISO
11461
11462-1
11463
11464
ISO
ISO
ISO
ISO
ISO
11465
11466
11468
11469
11471
ISO
ISO
ISO
ISO
ISO
11474
11475
11476
11480
11482
ISO
ISO
ISO
11483
11484
11486
ISO
ISO
11489
11490
ISO
ISO
ISO
ISO
11496
11497
11498
11499
Statistical Interpretation of Data - Tests and Confidence Intervals Relating to Proportions First Edition; Technical Corrigendum 1: 0901-1999
Raw Optical Glass - Determination of Birefringence First Edition
Information Technology - Microprocessor Systems - VICbus - Inter-Crate Cable Bus First Edition; Amendment 1 07-2000
Iron Ores - Certified Reference Materials - Preparation and Certification for Use in Chemical Analysis First Edition
Two-wheeled motorcycles ù Positioning of lighting and light-signalling devices Second edition
Soil Quality - Determination of Soil Water Content as a Volume Fraction Using Coring Sleeves - Gravimetric Method First Edition
Guidelines for Implementation of Statistical Process Control (SPC) - Part 1: Elements of SPC First Edition
Corrosion of Metals and Alloys - Evaluation of Pitting Corrosion First Edition
Soil quality Pretreatment of samples for physico-chemical analysis Second Edition
Soil Quality - Determination of Dry Matter and Water Content on a Mass Basis - Gravimetric Method First Edition; Corrigendum 1:
1994
Soil Quality - Extraction of Trace Elements Soluble in Aqua Regia First Edition
Plastics - Preparation of PVC Pastes for Test Purposes - Dissolver Method First Edition
Plastics - Generic Identification and Marking of Plastic Products Second Edition
Agricultural Tractors and Machinery - Coding of Remote Hydraulic Power Services and Controls First Edition
Corrosion of Metals and Alloys - Corrosion Tests in Artificial Atmosphere - Accelerated Outdoor Test by Intermittent Spraying of a Salt
Solution (Scab Test) First Edition
Paper and Board - Determination of CIE Whiteness, D65/10 Degree (Outdoor Daylight) Second Edition
Paper and Board - Determination of CIE Whiteness, C/2 Degree (Indoor Illumination Conditions) First Edition
Pulp, Paper and Board - Determination of Total Chlorine and Organically Bound Chlorine First Edition
Guidelines for Plutonium Dioxide (PuO2) Sampling in a Nuclear Reprocessing Plant First Edition
Nuclear fuel technology Preparation of plutonium sources and determination of 238Pu/239Pu isotope ratio by alpha spectrometry
Second Edition
Steel Tubes for Pressure Purposes - Qualification and Certification of Non-Destructive Testing (NDT) Personnel First Edition
Motorcycles Methods for setting running resistance on a chassis dynamometer Second Edition
Determination of Platinum in Platinum Jewellery Alloys - Gravimetric Determination by Reduction with Mercury(I) Chloride First
Edition
Determination of Palladium in Palladium Jewellery Alloys - Gravimetric Determination with Dimethylglyoxime First Edition
Seamless and Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of Tube Ends for the Detection of Laminar
Imperfections First Edition
Telemark Skis and Bindings - Binding Mounting Area - Requirements and Test Methods First Edition
Dental Handpieces - Dental Low-Voltage Electrical Motors First Edition
Dentistry ù Single-use cartridges for local anaesthetics Second Edition
Hydraulic Fluid Power - Determination of Particulate Contamination by Automatic Counting Using the Light Extinction Principle First
Edition; Corrigendum 1-1998
Plastics - Film and Sheeting - Determination of Dimensional Change on Heating First Edition
Plastics - Film and Sheeting - Determination of Blocking Resistance First Edition
Paints and Varnishes - Determination of Resistance to Humidity (Intermittent Condensation) First Edition
ISO
ISO
ISO
ISO
11500
11501
11502
11503
ISO
ISO
ISO
11507
11508
11512
ISO
ISO
11518-1
11518-2
ISO
11518-3
ISO
11518-6
ISO
ISO
11518-8
11518-9
Paints and varnishes ù Exposure of coatings to artificial weathering ù Exposure to fluorescent UV lamps and water Second edition
Soil Quality - Determination of Particle Density First Edition
Machinery for Forestery - Tracked Special Machines - Performance Criteria for Brake Systems First Edition
Information Technology - High-Performance Parallel Interface - Part 1: Mechanical, Electrical and Signalling Protocol Specification
(HIPPI-PH) First Edition
Information Technology - High-Performance Parallel Interface - Part 2: Framing Protocol (HIPPI-FP) Second Edition
Information Technology - High-Performance Parallel Interface - Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical
Link Control Protocol Data Units (HIPPI-LE) First Edition
Information Technology - High-Performance Parallel Interface - Part 6: Physical Switch Control (HIPPI-SC) First Edition Second
Edition
Information Technology - High-Performance Parallel Interface Part 8: Mapping to Asynchronous Transfer Mode (HIPPI-ATM) First
Edition
Information Technology - High-Performance Parallel Interface - Part 9: Serial Specification (HIPPI-Serial) First Edition
ISO
ISO
11518-10
11519-1
Information Technology - High-Performance Parallel Interface - Part 10: 6 400 Mbit/s Physical Layer (HIPPI-6400-PH) First Edition
Road Vehicles - Low-Speed Serial Data Communication - Part 1: General and Definitions First Edition
ISO
ISO
11519-3
11520-1
ISO
ISO
11520-2
11529-1
ISO
ISO
ISO
ISO
ISO
11529-2
11530
11531
11533
11534
Road Vehicles - Low-Speed Serial Data Communication - Part 3: Vehicle Area Network (VAN) First Edition; Amendment 1: 1995
Agricultural Grain Driers - Determination of Drying Performance - Part 1: General First Edition
Agricultural Grain Driers - Determination of Drying Performance - Part 2: Additional Procedures and Crop-Specific Requirements First
Edition
Milling Cutters - Designation - Part 1: Shank-type end mills of solid or tipped design Second Edition
Milling Cutters - Designation - Part 2: Shank-type and bore-type milling cutters with indexable inserts Second Edition; Replaces ISO
7848: 1986
Road Vehicles - Hydraulic Jacks - Specifications First Edition
Metallic Materials - Earing Test First Edition
Iron Ores - Determination of Cobalt Content - Flame Atomic Absorption Spectrometric Method First Edition
Iron ores Determination of tin Flame atomic absorption spectrometric method Second Edition
ISO
11535
Iron ores Determination of various elements Inductively coupled plasma atomic emission spectrometric method Second Edition
ISO
11537
Non-Destructive Testing - Thermal Neutron Radiographic Testing - General Principles and Basic Rules First Edition
ISO
ISO
11540
11541
ISO
11542-1
ISO
11542-2 CORR 1
ISO
11542-2
ISO
11543
ISO
11544
ISO
11545
ISO
11546-1
ISO
ISO
11546-2
11547
ISO
11551
ISO
11553-1
ISO
11553-2
ISO
ISO
ISO
11554
11555-1
11556
ISO
11557
ISO
11558
Caps for Writing and Marking Instruments Intended for Use by Children Up to 14 Years of Age - Safety Requirements First Edition
Natural Gas - Determination of Water Content at High Pressure First Edition
Plastics - Ultra-High- Molecular-Weight Polyethylene (PE-UHMW) Moulding and Extrusion Materials - Part 1: Designation System and
Basis for Specifications Second Edition
Plastics ù Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials ù Part 2: Preparation of test
specimens and determination of properties TECHNICAL CORRIGENDUM 1 First Edition
Plastics - Ultra-High-Molecular-Weight Polyethylene (PE-UHMW) Moulding and Extrusion Materials - Part 2: Preparation of Test
Specimens and Determination of Properties First Edition
Modified Starch - Determination of Hydroxypropyl Content - Method Using Proton Nuclear Magnetic Resonance (NMR) Spectrometry
First Edition
Information Technology - Coded Representation of Picture and Audio Information - Progressive Bi-Level Image Compression First
Edition; Corrigendum 2 - 12/15/2001
Agricultural Irrigation Equipment - Centre-Pivot and Moving Lateral Irrigation Machines with Sprayer or Sprinkler Nozzles Determination of Uniformity of Water Distribution Second Edition
Acoustics - Determination of Sound Insulation Performances of Enclosures - Part 1: Measurements Under Laboratory Conditions (for
Declaration Purposes) First Edition (CEN EN ISO 11546-1: 1995)
Acoustics - Determination of Sound Insulation Performances of Enclosures - Part 2: Measurements in Situ (for Acceptance and
Verification Purposes) First Edition (CEN EN ISO 11546-2: 1995)
Small Craft - Start- in-Gear Protection First Edition (CEN EN ISO 11547: 1995)
Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Method for Absorptance of Optical Laser Components
Second Edition
Safety of machinery Laser processing machines Part 1: General safety requirements First Edition; Cancels and Replaces ISO
11553:1996,
Safety of machinery ù Laser processing machines ù Part 2: Safety requirements for hand-held laser processing devices First Edition
[Superseded: ISO 11553]
Optics and photonics Lasers and laser-related equipment Test methods for laser beam power, energy and temporal characteristics
Third Edition
Road vehicles Stabilizing devices for caravans and light trailers Part 1: Integrated stabilizers First Edition
Paper and board - Determination of curl using a single vertically suspended test piece Second Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DDS-DC
Format Using 60 m and 90 m Length Tapes First Edition
Information Technology - Data Compression for Information Interchange - Adaptive Coding with Embedded Dictionary - DCLZ
Algorithm First Edition
ISO
11559
ISO
11560
ISO
11561
ISO
11562
ISO
11563
ISO
ISO
ISO
ISO
ISO
ISO
11564
11565 CORR 1
11565
11566
11567
11568-1
ISO
ISO
ISO
11568-2
11568-4
11568-5
ISO
11569
ISO
11570
ISO
11571
ISO
11572
ISO
11573
ISO
11574
ISO
11575
Information Technology - Data Interchange on 12,7 mm Wide 18-Track Magnetic Tape Cartridges - Extended Format First Edition
Information Technology - Information Interchange on 130 mm Optical Disk Cartridges Using the Magneto-Optical Effect, for Write
Once, Read Multiple Functionality First Edition
Ageing of Thermal Insulation Materials - Determination of the Long-Term Change in Thermal Resistance of Closed-Cell Plastics
(Accelerated Laboratory Test Methods) First Edition
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Metrological Characteristics of Phase Correct Filters
First Edition; Technical Corrigendum 1-1998
Crude Petroleum and Petroleum Products - Bulk Cargo Transfer - Guidelines for Achieving the Fullness of Pipelines First Edition
Stationary Source Emissions - Determination of the Mass Concentration of Nitrogen Oxides - Naphthylethylenediamine Photometric
Method First Edition; Corrigendum 1 04/01/2000
Road Vehicles - Spark-Plugs - Test Methods and Requirements
Road Vehicles - Spark-Plugs - Test Methods and Requirements Second Edition
Carbon Fibre - Determination of the Tensile Properties of Single-Filament Specimens First Edition
Carbon Fibre - Determination of Filament Diameter and Cross-Sectional Area First Edition
Banking Key management (retail) Part 1: Principles Second Edition
Banking - Key Management (retail) - Part 2: Symmetric ciphers, their key management and life cycle Second Edition; Cancels and
replaces ISO 11568-3:1994
Banking - Key Management (Retail) - Part 4: Asymmetric cryptosystems ù Key management and life cycle Second Edition
Banking - Key Management (Retail) - Part 5: Key Life Cycle for Public Key Cryptosystems First Edition
Information Technology - Telecommunications and Information Exchange Between Systems - 26-Pole Interface Connector
Mateability Dimensions and Contact Number Assignments First Edition; AS/NZS 4244: 1994
Information Technology - Telecommunications and Information Exchange Between Systems - Open Systems Interconnection Transport Protocol Identification Mechanism First Edition; AS/NZS 4245: 1994
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Networks Addressing Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Circuit Mode Bearer Services - Inter-Exchange Signalling Procedures and Protocol Third Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Synchronization Methods and
Technical Requirements for Private Integrated Services Networks First Edition; AS/NZS 4138: 1995
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Circuit-Mode 64 kbit/s Bearer Services - Service Description, Functional Capabilities and Information Flows Second Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Protocol Mappings for the OSI Data
Link Service First Edition
ISO
ISO
ISO
11576
11577
11578
Information Technology - Procedure for the Registration of Algorithms for the Lossless Compression of Data First Edition
Information Technology - Open Systems Interconnection - Network Layer Security Protocol First Edition
Information Technology - Open Systems Interconnection - Remote Procedure Call (RPC) First Edition
ISO
11579-1
ISO
11579-2
ISO
11579-3
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Part 1: Reference Configuration for PISN Exchanges (PINX) First Edition; (ETSI ETS 300 475-1: 1995) (Corrigendum 1-1996)
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Part 2: Reference Configuration for HS-PISN Exchanges (HS-PINX) First Edition
Information Technology - Private Integrated Services Network - Part 3: Reference Configuration for PINX Extension Lines First
Edition
ISO
11581-1
Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 1: Icons - General First Edition
ISO
ISO
ISO
11581-2
11581-3
11581-5
Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 2: Object Icons Fisrt Edition
Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 3: Pointer First Edition
Information technology User system interfaces and symbols Icon symbols and functions Part 5: Tool icons First Edition
ISO
11581-6
ISO
11582
Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 6: Action Icons First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Generic Functional Protocol for the Support of Supplementary Services - Inter-Exchange Signalling Procedures and Protocols
Second Edition
ISO
11584
ISO
11586-1
ISO
11586-2
ISO
11586-3
ISO
11586-4
ISO
11586-5
ISO
11586-6
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Circuit-Mode Multi-Rate Bearer Services - Service Description, Functional Capabilities and Information Flows First Edition
Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Overview, Models and Notation First
Edition
Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element
(SESE) Service Definition First Edition
Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element
(SESE) Protocol Specification First Edition
Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Protecting Transfer Syntax Specification
First Edition
Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element
(SESE) Protocol Implementation Conformance Statement (PICS) Proforma First Edition
Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Protecting Transfer Syntax Protocol
Implementation Conformance Statement (PICS) Proforma First Edition
Information Technology - Open Systems Interconnection - Application Context for Systems Management with Transaction Processing
First Edition
Small Craft, Engine-Driven - Field of Vision from Helm Position First Edition
Small craft Less than 8 m Lengh of Hull - Determination of Maximum Propulsion Power Rating First Edition
Manipulating Industrial Robots - Automatic End Effector Exchange Systems - Vocabulary and Presentation of Characteristics First
Edition
ISO
ISO
ISO
11587
11591
11592
ISO
11593
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11599
11600
11601
11602-1
11602-2
11605
11606
ISO
11607-1
ISO
ISO
ISO
ISO
11607-2
11608-1
11608-2
11608-3
ISO
ISO
11608-4
11609
ISO
ISO
11612
11613
Determination of Gas Porosity and Gas Permeability of Hydraulic Binders Containing Embedded Radioactive Waste First Edition
Building Construction - Jointing Products - Classification and Requirements for Sealants Second Edition
Wheeled Fire Extinguishers - Performance and Construction First Edition
Fire Protection - Portable and Wheeled Fire Extinguishers - Part 1: Selection and Installation First Edition
Fire Protection - Portable and Wheeled Fire Extinguishers - Part 2:Inspection and Maintenance First Edition
Paper and Board - Calibration of Variable-Area Flowmeters First Edition
Ships and Marine Technology - Marine Electromagnetic Compasses Second Edition; Corrigendum 1: 2/1/2005
Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging
systems First edition; ISO 11607-1 and ISO 11607-2 cancel and replace ISO 11607:2003
Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes First
edition; ISO 11607-1 and ISO 11607-2 cancel and replace ISO 11607:2003
Pen-Injectors for Medical Use - Part 1: Pen-Injectors - Requirements and Test Methods First Edition
Pen-Injectors for Medical Use - Part 2: Needles - Requirements and Test Methods First Edition
Pen-Injectors for Medical Use - Part 3: Finished Cartridges - Requirements and Test Methods First Edition
Pen-injectors for medical use - Part 4: Requirements and test methods for electronic and electromechanical pen-injectors First
Edition
Dentistry - Toothpastes - Requirements, Test Methods and Marking First Edition
Clothing for Protection Against Heat and Flame - Test Methods and Performance Requirements for Heat-Protective Clothing First
Edition
Protective Clothing for Firefighters - Laboratory Test Methods and Performance Requirements First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11614
11620
11621
11622
11623
11625
11629
Reciprocating Internal Combustion Compression-Ignition Engines - Apparatus for Measurement of the Opacity and for Determintion
of the Light Absorption Coefficient of Exhaust Gas First Edition; Replaces and Cancels ISO 3173:1974 and ISO/TR 4011:1976
Information and Documentation - Library Performance Indicators First Edition; Amendment 1: 1/15/2003
Gas Cylinders - Procedures for Change of Gas Service First Edition
Gas cylinders - Conditions for filling gas cylinders First Edition
Transportable Gas Cylinders - Periodic Inspection and Testing of Composite Gas Cylinders First Edition
Gas Cylinders - Safe Handling Second edition
Cranes Measurement of the mass of a crane and its components First Edition
ISO
ISO
11630
11631
ISO
ISO
ISO
ISO
ISO
ISO
11632
11634 CORR 1
11634
11640
11641
11642
ISO
ISO
ISO
ISO
ISO
ISO
11643
11644
11646
11648-1
11648-2
11650
ISO
11652
ISO
ISO
ISO
11653
11654
11655
ISO
11659-1
ISO
11659-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11659-3
11660-1
11660-2
11660-3
11660-5
11661
11662-1
ISO
11667
Cranes - Measurement of Wheel Alignment First Edition
Measurement of Fluid Flow - Methods of Specifying Flowmeter Performance First Edition
Stationary Source Emissions - Determination of Mass Concentration of Sulfur Dioxide - Ion Chromatography Method First Edition
Snowboard-boots ù Interface with ski-bindings TECHNICAL CORRIGENDUM 1
Snowboard-Boots - Interface with Ski-Binding First Edition
Leather - Tests for Colour Fastness - Colour Fastness to Cycles of to-and-fro Rubbing First Edition; (IULTCS/IUF 450)
Leather - Tests for Colour Fastness - Colour Fastness to Perspiration First Edition; (IULTCS/IUF 426)
Leather - Tests for Colour Fastness - Colour Fastness to Water First Edition; (IULTCS/IUF 421)
Leather - Tests for Colour Fastness - Colour Fastness of Small Samples to Dry-Cleaning Solutions First Edition; (IULTCS/IUF 434)
Leather - Tests for Adhesion of Finish First Edition; (IULTCS/IUF 470)
Leather - Measurement of Area First Edition; (IULTCS/IUF 32)
Statistical Aspects of Sampling from Bulk Materials - Part 1: General Principles First Edition
Statistical Aspects of Sampling from Bulk Materials - Part 2: Sampling of Particulate Materials First Edition
Performance of Refrigerant Recovery and/or Recycling Equipment First Edition
Steel and Iron - Determination of Cobalt Content - Flame Atomic Absorption Spectrometric Method First Edition; BS 6200: Part 3:
Section 3.11: Subsection 3.11.3: 1997
Steel - Determination of High Cobalt Content - Potentiometric Titration Method After Separation by Ion Exchange First Edition
Acoustics - Sound Absorbers for Use in Buildings - Rating of Sound Absorption First Edition
Measurement of Liquid Flow in Open Channels - Method of Specifying Performance of Hydrometric Equipment First Edition
Textile Machinery and Accessories - Machine Parts in Contact with Textile Processing Oils - Part 1: Determination of Anticorrosive
Effect upon Steel First Edition
Textile machinery and accessories Machine parts in contact with textile processing oils Part 2: Determination of the impact on
polymeric materials First Edition
Textile machinery and accessories Machine parts in contact with textile processing oils Part 3: Determination of the impact on
lacquers First Edition
Cranes - Access, Guards and Restraints - Part 1: General First Edition
Cranes - Access, Guards and Restraints - Part 2: Mobile Cranes First Edition
Cranes - Access, Guards and Restraints - Part 3: Tower Cranes First Edition
Cranes - Access, Guards and Restraints - Part 5: Bridge and Gantry Cranes First Edition
Mobile Cranes - Presentation of Rated Capacity Charts First Edition
Mobile Cranes - Experimental Determination of Crane Performance - Part 1: Tipping Loads and Radii First Edition
Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Resin, Reinforced-Fibre and Mineral-Filler Content
- Dissolution Methods First Edition
ISO
11668
Binders for Paints and Varnishes - Chlorinated Polymerization Resins - General Methods of Test First Edition
Lasers and laser-related equipment ù Test methods for laser beam parameters ù Beam positional stability TECHNICAL
CORRIGENDUM 1 Second Edition
Lasers and laser-related equipment ù Test methods for laser beam parameters ù Beam positional stability Second Edition
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes Determination of the fracture toughness properties First edition
Ships and marine technology Heading control systems Second Edition
Textile machinery and accessories Flatbed knitting machines Vocabulary Second Edition
Textile Machinery and Accessories - Chain Links for Wrap Knitting Machines - Vocabulary and Symbols First Edition
Textile Machinery and Accessories - Main Dimensions of Flat Steel Healds with Open End Loops - Part 1: C-Shaped End Loops First
Edition
Textile Machinery and Accessories - Main Dimensions of Flat Steel Healds with Open End Loops - Part 2: J-Shaped End Loops First
Edition
Textile Machinery and Accessories - Main Dimensions of Open End Loop Flat Steel Healds and Their Corresponding Heald- Carrying
Rods - Part 3: Carrying Rods for Healds with C- and J-Shaped End Loops First Edition
Agricultural Irrigation Equipment - Aluminium Irrigation Tubes First Edition
Machinery for Forestry - Safety Requirements and Testing for Pole-Mounted Powered Pruners - Part 1: Units Fitted with an Integral
Combustion Engine First Edition
Machinery for Forestry - Safety Requirements and Testing for Pole-Mounted Powered Pruners - Part 2: Units for Use with a BackPack Power Source First Edition
Machinery for forestry ù Portable chainsaw safety requirements and testing ù Part 1: Chain-saws for forest service AMENDMENT 1:
Balance Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
11670 CORR 1
11670
11673
11674
11675
11676
ISO
11677-1
ISO
11677-2
ISO
ISO
11677-3
11678
ISO
11680-1
ISO
11680-2
ISO
11681-1 AMD 1
ISO
11681-1
Machinery for forestry Portable chain-saw safety requirements and testing Part 1: Chain-saws for forest service Second Edition
ISO
ISO
ISO
11681-2
11682
11683
ISO
ISO
ISO
ISO
11684
11687-1
11687-2
11687-3
ISO
11689
ISO
11690-1
Machinery for forestry Portable chain-saw safety requirements and testing Part 2: Chain-saws for tree service Second Edition
Brush-Cutters and Grass-Trimmers - Technical Data First Edition; (Corrected and Reprinted - 1994)
Packaging - Tactile Warnings of Danger - Requirements Second Edition; Corrected and Reprinted 09/01/1998
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Safety Signs and Hazard Pictorials General Principles First Edition
Plain Bearings - Pedestal Plain Bearings - Part 1: Pillow Blocks First Edition
Plain Bearings - Pedestal Plain Bearings - Part 2: Side Flange Bearings First Edition
Plain Bearings - Pedestal Plain Bearings - Part 3: Centre Flange Bearings First Edition
Acoustics - Procedure for the Comparison of Noise-Emission Data for Machinery and Equipment First Edition [Superseded By: GOST
31327]
Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 1: Noise Control Strategies
First Edition
ISO
11690-2
ISO
ISO
ISO
ISO
11691
11692
11693
11694-1
ISO
11694-2
ISO
ISO
11694-3
11694-4
ISO
11694-5
ISO
ISO
11694-6
11697
ISO
11698-1
ISO
11698-2
ISO
11699-1
ISO
11699-2
ISO
11713
ISO
11721-1
ISO
11721-2
ISO
ISO
ISO
ISO
11722
11723
11724
11726
Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 2: Noise Control Measures
First Edition
Acoustics - Measurement of Insertion Loss of Ducted Silencers without Flow - Laboratory Survey Method First Edition; (Corrected
and Reprinted - 1995)
Ferritic-Pearlitic Engineering Steels for Precipitation Hardening from Hot-Working Temperatures First Edition
Identification Cards - Optical Memory Cards - General Characteristics Third Edition
Identification Cards - Optical Memory Cards - Linear Recording Method - Part 1: Physical Characteristics Third Edition
Identification Cards - Optical Memory Cards - Linear Recording Method - Part 2: Dimensions and Location of the Accessible Optical
Area Third Edition
Identification Cards - Optical Memory Cards - Linear Recording Method - Part 3: Optical Properties and Characteristics Second
Edition
Identification Cards - Optical Memory Cards - Linear Recording Method - Part 4: Logical Data Structures Second Edition
Identification cards Optical memory cards Part 5: Data format for information interchange for applications using ISO/IEC 11694-4,
Annex B First Edition
Identification cards Optical memory cards Linear recording method Part 6: Use of biometrics on an optical memory card First
Edition
Bases for Design of Structures - Loads Due to Bulk Materials First Edition
Micrographics - Methods of Measuring Image Quality Produced by Aperture Card Scanners - Part 1: Characteristics of the Test
Images First Edition
Micrographics - Methods of Measuring Image Quality Produced by Aperture Card Scanners - Part 2: Quality Criteria and Control First
Edition
Non-Destructive Testing - Industrial Radiographic Films - Part 1: Classification of Film Systems for Industrial Radiography First
Edition
Non-Destructive Testing - Industrial Radiographic Films - Part 2: Control of Film Processing by Means of Reference Values First
Edition
Carbonaceous Materials Used in the Production of Aluminium - Cathode Blocks and Baked Anodes - Determination of Electrical
Resistivity at Ambient Temperature
Textiles - Determination of Resistance of Cellulose-Containing Textiles to Micro-Organisms - Soil Burial Test - Part 1: Assessment of
Rot-Retardant Finishing First Edition
Textiles Determination of the resistance of cellulose-containing textiles to micro-organisms Soil burial test Part 2: Identification of
long-term resistance of a rot retardant finish First Edition
Solid Mineral Fuels - Hard Coal - Determination of Moisture in the General Analysis Test Sample by Drying in Nitrogen First Edition
Solid mineral fuels Determination of arsenic and selenium Eschka s mixture and hydride generation method First Edition
Solid mineral fuels Determination of total fluorine in coal, coke and fly ash First Edition
Solid mineral fuels Guidelines for the validation of alternative methods of analysis First Edition
ISO
ISO
11727
11731
ISO
11731-2
ISO
11732
ISO
11733
ISO
11734
ISO
11737-1 CORR 1
ISO
11737-1
ISO
ISO
11737-2
11738
ISO
11748-1
ISO
ISO
ISO
11748-2
11748-3
11749
ISO
ISO
11752
11754
ISO
ISO
11755
11756
ISO
ISO
ISO
ISO
11758
11759
11760
11770-1
Pneumatic Fluid Power - Identification of Ports and Control Mechanisms of Control Valves and Other Components First Edition
Water Quality - Detection and Enumeration of Legionella First Edition
Water quality Detection and enumeration of Legionella Part 2: Direct membrane filtration method for waters with low bacterial counts
First Edition
Water quality Determination of ammonium nitrogen Method by flow analysis (CFA and FIA) and spectrometric detection Second
Edition
Water quality Determination of the elimination and biodegradability of organic compounds in an aqueous medium Activated sludge
simulation test Second Edition
Water Quality - Evaluation of theUltimate" Anaerobic Biodegradability of Organic Compounds in Digested Sludge - Method by
Measurement of the Biogas Production First Edition"
Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products
TECHNICAL CORRIGENDUM 1
Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products
Second Edition;:2004
Sterilization of Medical Devices - Microbiological Methods - Part 2: Tests of Sterility Performed in the Validation of a Sterilization
Process First Edition
Agricultural Irrigation Equipment - Control Heads First Edition
Road Vehicles - Technical Documentation of Electrical and Electronic Systems - Part 1: Content of Exchanged Documents First
Edition
Road Vehicles - Technical Documentation of Electrical and Electronic Systems - Part 2: Documentation Agreement First Edition
Road Vehicles - Technical Documentation of Electrical and Electronic Systems - Part 3: Application Example First Edition
Belt Drive - V-Ribbed Belts for the Automotive Industry - Fatigue Test First Edition; Technical Corrigendum 1: 4/01/2003
Flexible Cellular Polymeric Materials - Moulded and Extruded Sponge or Expanded Cellular Rubber Products - Compressibility Test
on Finished Parts First Edition; Amendment 1: 09/15/2006
Space data and information transfer systems - Telemetry channel coding Second Edition
Gas cylinders Cylinder bundles for compressed and liquefied gases (excluding acetylene) Inspection at time of filling Second edition
Information Technology - Programming Languages - M Second Edition
Rubber and Plastics Hoses - Exposure to a Xenon Arc Lamp - Determination of Changes in Colour and Appearance First Edition;
Technical Corrigendum 1: 8/1/1998
Rubber Hoses and Hose Assemblies for Dispensing Liquefied Petroleum Gases (LPGs) - Specification First Edition
Classification of coals First edition
Information Technology - Security Techniques - Key Management - Part 1: Framework First Edition
ISO
11770-2
ISO
ISO
ISO
11770-3
11770-4
11782-1
ISO
11782-2
ISO
11783-1
ISO
11783-2 AMD 1
ISO
11783-2 CORR 1
ISO
11783-2
ISO
11783-3
ISO
11783-4
ISO
11783-5
ISO
11783-6 CORR 1
ISO
11783-6
ISO
11783-7 CORR 1
ISO
11783-7
ISO
11783-8
ISO
11783-9
ISO
11783-11
Information Technology - Security Techniques - Key Management - Part 2: Mechanisms Using Symmetric Techniques First Edition;
Technical Corrigendum 1: 07/15/2005
Information Technology - Security Techniques - Key Management - Part 3: Mechanisms Using Asymmetric Techniques First Edition
Information technology Security techniques Key management Part 4: Mechanisms based on weak secrets First Edition
Corrosion of Metals and Alloys - Corrosion Fatigue Testing - Part 1: Cycles to Failure Testing First Edition
Corrosion of Metals and Alloys - Corrosion Fatigue Testing - Part 2: Crack Propagation Testing Using Precracked Specimens First
Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 1: General standard for
mobile data communication First Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 2: Physical layer
AMENDMENT 1 First Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 2: Physical layer First
Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 2: Physical layer First
Edition
Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 3: Data Link Layer
First Edition
Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 4: Network Layer First
Edition
Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 5: Network
Management First Edition: Corrigendum 1 6/15/2002
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 6: Virtual terminal
TECHNICAL CORRIGENDUM 1 First Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 6: Virtual terminal First
Edition
Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 7: Implement
Messages Application Layer First Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 7: Implement messages
application layer First Edition
Tractors and machinery for agriculture and forestry Serial control and communications data network Part 8: Power train messages
First Edition
Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 9: Tractor ECU First
Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 11: Mobile data element
dictionary First Edition
ISO
ISO
ISO
ISO
11783-13
11784
11785
11786
ISO
11787
ISO
11788-1
ISO
11788-2
ISO
ISO
ISO
11788-3
11789
11795
ISO
ISO
11798
11799
ISO
ISO
ISO
ISO
11800
11801 CORR 2
11801 CORR 1
11801
ISO
11806
ISO
11807-1
ISO
11807-2
ISO
11810-1
ISO
ISO
ISO
11810-2
11812
11813
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 13: File server First
Edition
Radio-Frequency Identification of Animals - Code Structure Second Edition; Amendment 1:11/15/2004
Radio-Frequency Identification of Animals - Technical Concept First Edition
Agricultural Tractors and Machinery - Tractor- Mounted Sensor Interface - Specifications First Edition
Machinery for Agriculture and Forestry - Data Interchange Between Management Computer and Process Computers - Data
Interchange Syntax First Edition
Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 1: General
Description First Edition
Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 2: Dairy
Farming First Edition
Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 3: Pig Farming
First Edition
Powered Edgers with Rigid Cutting Means - Definitions, Safety Requirements and Test Procedures First Edition
Agricultural Tractor Drive Wheel Tyres - Method of Measuring Tyre Rolling Circumference First Edition
Information and Documentation - Permanence and Durability of Writing, Printing and Copying on Paper - Requirements and Test
Methods First Edition
Information and documentation Document storage requirements for archive and library materials First Edition
Information and Documentation - Requirements for Binding Materials and Methods Used in the Manufacture of Books First Edition
Information technology û Generic cabling for customer premises Second Edition
Information technology û Generic cabling for customer premises Second Edition
Information technology û Generic cabling for customer premises Second Edition
Agricultural and Forestry Machinery - Portable Hand-Held Combustion Engine Driven Brush Cutters and Grass Trimmers - Safety
First Edition
Integrated Optics - Vocabulary - Part 1: Basic Terms and Symbols Optique Integree - Vocabulaire - Partie 1: Termes Fondamentaux
Et Symboles First Edition
Integrated Optics - Vocabulary - Part 2: Terms Used in Classification Optique Integree - Vocabulaire - Partie 2: Termes Utilises Pour
La Classification First Edition
Lasers and laser-related equipment Test method and classification for the laser resistance of surgical drapes and/or patient
protective covers Part 1: Primary ignition and penetration First edition
Lasers and laser-related equipment ù Test method and classification for the laser-resistance of surgical drapes and/or patientprotective covers ù Part 2: Secondary ignition First edition
Small Craft - Watertight Cockpits and Quick-Draining Cockpits First Edition
Milk and Milk Products - Determination of Zinc Content - Flame Atomic Absorption Spectrometric First Edition
ISO
ISO
11814
11815
ISO
11816-1
Dried milk Assessment of heat treatment intensity Method using high-performance liquid chromatography First Edition: IDF 162
Milk ù Determination of total milk-clotting activity of bovine rennets First Edition
Milk and milk products Determination of alkaline phosphatase activity Part 1: Fluorimetric method for milk and milk-based drinks
Second Edition
ISO
ISO
11816-2
11817
Milk and Milk Products - Determination of Alkaline Phosphatase Activity - Part 2: Fluorometric Method for Cheese First Edition
Roasted Ground Coffee - Determination of Moisture Content - Karl Fischer Method (Reference Method) First Edition
ISO
ISO
ISO
11819-1
11820
11821
ISO
11822
ISO
11825
ISO
11833-1
ISO
ISO
11833-2
11838
ISO
11841-1
ISO
11841-2
ISO
ISO
11843-1
11843-2
ISO
ISO
11843-3
11843-4
ISO
11844-1
Acoustics - Measurement of the Influence of Road Surfaces on Traffic Noise - Part 1: Statistical Pass-By Method First Edition
Acoustics - Measurements on Silencers IN SITU First Edition
Acoustics - Measurements of the in Situ Sound Attenuation of a Removable Screen First Edition
Information and Documentation - Extension of the Arabic Alphabet Coded Character Set for Bibliographic Information Interchange
First Edition
Textile Machinery and Accessories - Latch-Type Needles for Knitting Machines - Coordination of Shank Widths and Hook Heights
First Edition
Plastics - Unplasticized Poly(Vinyl Chloride) Sheets - Types, Dimensions and Characteristics - Part 1: Sheets of Thickness Not Less
Than 1 mm First Edition
Plastics - Unplasticized Poly(Vinyl Chloride) Sheets - Types, Dimensions and Characteristics - Part 2: Sheets of Thickness Less Than
1 mm First Edition
Motorcycle and Motorcycle-Rider Kinematics - Vocabulary First Edition
Road Vehicles and Internal Combustion Engines - Filter Vocabulary Part 1: Definitiions of Filters and Filter Components Vehicules
Routiers Et Moteurs A Combustion Interne - Vocabulaire Relatif Aux Filtres - Partie 1: Definitions Des Filtres Et De Leurs
Composants First Edition
Road Vehicles and Internal Combustion Engines - Filter Vocabulary Part 2: Definitiions of Characteristica of Filters and their
Components Vehicules Routiers Et Moteurs A Combustion Interne - Vocabulaire Relatif Aux Filtres - Partie 2: Definitions Des
Caracteristiques Des Filtres Et De Leurs Composants First Edition
Capability of Detection - Part 1: Terms and Definitions Capacite de detection - Partie 1: Termes et definitions First Edition; Technical
Corrigendum 1: 11/15/2003
Capability of Detection - Part 2: Methodology in the Linear Calibration Case First Edition
Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data
are used First Edition
Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value First Edition
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of
indoor corrosivity First Edition
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in
indoor atmospheres First Edition
Corrosion of metals and alloys Classification of low corrosivity of indoor atmospheres Part 3: Measurement of environmental
parameters affecting indoor corrosivity First Edition
Corrosion of Metals and Alloys - General Principles for Corrosion Testing First Edition
Corrosion of Metals and Alloys - Determination of Resistance to Intergranular Corrosion of Solution Heat- Treatable Aluminium Alloys
First Edition
Machinery for Forestry - Self-Propelled Machinery - Safety Requirements Second Edition
Textile Floor Coverings - Determination of Resistance to Delamination First Edition
Textile Floor Coverings - Determination of Friability of Attached Foams First Edition
Textile Floor Coverings - Pure Wool, Hand-Knotted Pile Carpets - Specification First Edition
Textile Floor Coverings - Jute Carpet Backing Fabric - Specification First Edition
Textile Floor Coverings - Coir Mats - Types and Specification First Edition
Earth-Moving Machinery - Auxiliary Starting Aid Electrical Connector First Edition
Instant Whole Milk Powder - Determination of White Flecks Number First Edition
Milk and milk products Enumeration of presumptive Escherichia coli Part 1: Most probable number technique using 4methylumbelliferyl- Ô-D-glucuronide (MUG) Second Edition; IDF 170-1;:1997 [Replaced: ISO 11866-2, ISO 11866-2]
Milk and milk products - Enumeration of presumptive Escherichia coli - Part 2: Colony-count technique at 44 C using membranes
Second Edition; IDF 170-2; Replaces ISO 11866-3:1997
ISO
11844-2
ISO
ISO
11844-3
11845
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11846
11850
11857
11858
11859
11860
11861
11862
11865
ISO
11866-1
ISO
11866-2
ISO
ISO
ISO
ISO
11868
11869
11870
11873
Heat-treated milk ù Determination of lactulose content ù Method using highperformance liquid chromatography Second Edition
Yogurt - Determination of Titratable Acidity - Potentiometric Method First Edition
Milk and Milk Products - Determination of Fat Content - General Guidance on the Use of Butyrometric Methods First Edition
Hardmetals Determination of sulfur and carbon contents in cobalt metal powders Infrared detection method First edition
ISO
11881
ISO
ISO
11882
11883
Corrosion of Metals and Alloys - Exfoliation Corrosion Testing of Aluminium Alloys First Edition; Technical Corrigendum 1: 7-15-1999
Optics and Optical Instruments - Microscopes - Interfacing Connection for 35 mm SLR Photo Cameras (T-Thread Adaptation) First
Edition
Optics and Optical Instruments - Microscopes - Marking of Stereomicroscopes First Edition
ISO
11884-1
Optics and photonics - Minimum requirements for stereomicroscopes - Part 1: Stereomicroscopes for general use Second Edition
ISO
11884-2
ISO
11885
Optics and photonics ù Minimum requirements for stereomicroscopes ù Part 2: High performance microscopes Second Edition
Water quality ù Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) Second
Edition
ISO
11886 CORR 1
ISO
11886
ISO
11890-1
ISO
ISO
11890-2
11897
ISO
11898-1 CORR 1
ISO
11898-1
ISO
11898-2
ISO
11898-3 CORR 1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11898-3
11898-4
11898-5
11900-1
11900-2
11900-3
11901-1
11901-2
11903
ISO
11904-1
ISO
ISO
ISO
ISO
11904-2
11905-1
11907-1
11907-2
ISO
11907-3
Building construction machinery and equipment ù Pile driving and extracting equipment ù Terminology and commercial Specifications
First Edition
Building construction machinery and equipment ù Pile driving and extracting equipment ù Terminology and commercial Specifications
First Edition
Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Part 1: Difference Method Second Edition
Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method Second
Edition
Packaging - Sacks Made from Thermoplastic Flexible Film - Tear Propagation on Edge Folds First Edition
Road vehicles ù Controller area network (CAN) ù Part 1: Data link layer and physical signalling TECHNICAL CORRIGENDUM 1 First
Edition
Road vehicles ù Controller area network (CAN) ù Part 1: Data link layer and physical signalling First Edition [Replaced: ISO 11898]
Road vehicles Controller area network (CAN) Part 2: High-speed medium access unit First Edition; Together with 11898-1:2003
Replaces 11898:1993
Road vehicles ù Controller area network (CAN) ù Part 3: Low-speed, fault-tolerant, medium-dependent interface TECHNICAL
CORRIGENDUM 1 First Edition [Replaced: ISO 11519-2]
Road vehicles ù Controller area network (CAN) ù Part 3: Low-speed, fault-tolerant, medium-dependent interface First Edition
[Superseded: ISO 11519-2]
Road vehicles Controller area network (CAN) Part 4: Time-triggered communication
Road vehicles ù Controller area network (CAN) ù Part 5: High-speed medium access unit with low-power mode First Edition
Tools for pressing ù Ball-lock punch retainers ù Part 1: Types A and B, rectangular and square for light duty Second edition
Tools for Pressing - Ball-Lock Punch Retainers - Part 2: Types C and D, Reduced for Light Duty First Edition
Tools for pressing Ball-lock punch retainers Part 3: Type E, reduced for heavy duty First Edition
Tools for pressing Gas springs Part 1: General specifications Second Edition
Tools for pressing Gas springs Part 2: Specification of accessories Second Edition
Tools for Pressing - Guide Pillar Mountings First Edition
Acoustics - Determination of Sound Immission from Sound Sources Placed Close to the Ear - Part 1: Technique Using a Microphone
in a Real Ear (MIRE Technique) First Edition
Acoustics Determination of sound immission from sound sources placed close to the ear Part 2: Technique using a manikin First
Edition
Water Quality - Determination of Nitrogen - Part 1: Method Using Oxidative Digestion with Peroxosulfate First Edition
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 1: Guidance First Edition
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 2: Static Method First Edition
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 3: Dynamic Decomposition Method Using a
Travelling Furnace First Edition
ISO
ISO
ISO
11907-4
11908
11909
ISO
11922-1
ISO
ISO
11922-2
11923
ISO
11925-2
ISO
11925-3
ISO
11926-1
ISO
11926-2
ISO
ISO
ISO
11926-3
11928-1
11928-2
ISO
11929-1
ISO
11929-2
ISO
11929-3
ISO
11929-4
ISO
11929-5
ISO
11929-6
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 4: Dynamic Decomposition Method Using a
Conical Radiant Heater First Edition
Binders for Paints and Varnishes - Amino Resins - General Methods of Test First Edition
Binders for paints and varnishes ù Polyisocyanate resins ù General methods of test Second Edition
Thermoplastics Pipes for the Conveyance of Fluids - Dimensions and Tolerances - Part 1: Metric Series First Edition; Together with
ISO 11922-2, it Cancels and Replaces ISO 3606: 1976, ISO 3607: 1977, ISO 3608: 1976 and ISO 3609:1977
Thermoplastics Pipes for the Conveyance of Fluids - Dimensions and Tolerances - Part 2: Inch-Based Series First Edition; Together
with ISO 11922-1, it Cancels and Replaces ISO 3606: 1976, ISO 3607: 1977, ISO 3608: 1976 and ISO 3609: 1977
Water Quality - Determination of Suspended Solids by Filtration Through Glass-Fibre Filters First Edition
Reaction to Fire Tests - Ignitability of Building Products Subjected to Direct Impingement of Flame - Part 2: Single-Flame Source Test
Second Edition
Reaction to Fire Tests - Ignitability of Building Products Subjected to Direct Impingement of Flame - Part 3: Multi-Source Test First
Edition; Technical Corrigendum 1-1998
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 1: Ports with ORing Seal in Truncated Housing First Edition
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 2: Heavy-Duty
(S Series) Stud Ends First Edition (SAE J 1926/2)
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 3: Light-Duty
(L Series) Stud Ends First Edition
Micrographics - Quality Control of Graphic COM Recorders - Part 1: Characteristics of the Test Frames First Edition
Micrographics - Quality Control of Graphic COM Recorders - Part 2: Quality Criteria and Control First Edition
Determination of the Detection Limit and Decision Threshold for Ionizing Radiation Measurements - Part 1: Fundamentals and
Application to Counting Measurements without the Influence of Sample Treatment First Edition
Determination of the Detection Limit and Decision Threshold for Ionizing Radiation Measurements - Part 2: Fundamentals and
Application to Counting Measurements with the Influence of Sample Treatment First Edition
Determination of the Detection Limit and Decision Threshold for Ionizing Radiation Measurements - Part 3: Fundamentals and
Application to Counting Measurements by High Resolution Gamma Spectrometry, without the Influence of Sample Treatment First
Edition
Determination of the Detection Limit and Decision Threshold for Ionizing Radiation Measurements - Part 4: Fundamentals and
Application to Measurements by Use of Linear-Scale Analogue Ratemeters, without the Influence of Sample Treatment First Edition
Determination of the detection limit and decision threshold for ionizing radiation measurements Part 5: Fundamentals and
applications to counting measurements on filters during accumulation of radioactive material First edition
Determination of the detection limit and decision threshold for ionizing radiation measurements Part 6: Fundamentals and
applications to measurements by use of transient mode First edition
ISO
11929-7
ISO
11929-8
ISO
11932
ISO
11933-1
ISO
11933-2
ISO
11933-3
ISO
ISO
ISO
11933-4
11933-5
11940
ISO
11940-2
ISO
ISO
ISO
ISO
11943
11948-1
11949
11950
ISO
ISO
11951
11957
ISO
ISO
ISO
ISO
ISO
11960 CORR 1
11960
11961
11962 CORR 1
11963
ISO
ISO
ISO
11969
11970
11971
Determination of the detection limit and decision threshold for ionizing radiation measurements Part 7: Fundamentals and general
applications First Edition
Determination of the detection limit and decision threshold for ionizing radiation measurements Part 8: Fundamentals and application
to unfolding of spectrometric measurements without the influence of sample treatment First Edition
Activity Measurements of Solid Materials Considered for Recycling, Re-Use, or Disposal as Non-Radioactive Waste First Edition
Components for Containment Enclosures - Part 1: Glove/Bag Ports, Bungs for Glove/Bag Ports, Enclosure Rings and
Interchangeable Units First Edition
Components for Containment Enclosures - Part 2: Glove, Welded Bags, Gaiters for Remote-Handling Tongs and for Manipulators
First Edition
Components for Containment Enclosures - Part 3: Transfer Systems Such as Plain Doors, Airlock Chambers, Double Door Transfer
Systems, Leaktight Connections for Waste Drums First Edition
Components for Containment Enclosures - Part 4: Ventilation and Gas-Cleaning Systems Such as Filters, Traps, Safety and
Regulation Valves, Control and Protection Devices First Edition
Components for Containment Enclosures - Part 5: Penetrations for Electrical and Fluid Circuits First Edition
Information and Documentation - Transliteration of Thai First Edition
Information and documentation ù Transliteration of Thai characters into Latin characters Part 2: Simplified transcription of Thai
language First edition
Hydraulic Fluid Power - On-Line Automatic Particle-Counting Systems for Liquids - Methods of Calibration and Validation First Edition
Urine-Absorbing Aids - Part 1: Whole-Product Testing First Edition
Cold-Reduced Electrolytic Tinplate First Edition; Replaces ISO 1111-1, 1111-2, 4977-1, 4977-2
Cold-Reduced Electrolytic Chromium/Chromium Oxide-Coated Steel First Edition;
Cold-Reduced Blackplate in Coil Form for the Production of Tinplate or Electrolytic Chromium /Chromium Oxide-Coated Steel First
Edition
Acoustics - Determination of Sound Insulation Performance of Cabins - Laboratory and in Situ Measurements First Edition
Petroleum and natural gas industries ù Steel pipes for use as casing or tubing for wells TECHNICAL CORRIGENDUM 1 Third Edition
Petroleum and natural gas industries ù Steel pipes for use as casing or tubing for wells Third Edition
Petroleum and Natural Gas Industries - Steel Pipes for Use as Drill Pipe - Specification First Edition
Micrographics ù Image mark (blip) used with 16 mm and 35 mm roll microfilm First Edition
Plastics - Polycarbonate Sheets - Types, Dimensions and Characteristics First Edition (CEN EN ISO 11963: 1995)
Water Quality - Determination of Arsenic - Atomic Absorption Spectrometric Method (Hydride Technique) First Edition (CEN EN ISO
11969- 1996)
Specification and Approval of Welding Procedures for Production Welding of Steel Castings First Edition
Visual Examination of Surface Quality of Steel Castings First Edition
ISO
ISO
11972
11973
Corrosion-Resistant Cast Steels for General Applications First Edition
Heat-Resistance Cast Steels and Alloys for General Applications First Edition
ISO
11978
ISO
11979-1
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Information Supplied by the Manufacturer First Edition
Ophthalmic implants Intraocular lenses Part 1: Vocabulary Implants ophtalmiques Lentilles intraoculaires Partie 1: Vocabulaire
Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11979-2
11979-3
11979-4
11979-5
11979-6
11979-7
11979-8
11979-9
11979-10
11980
ISO
ISO
11981
11985
ISO
ISO
11986
11987
ISO
11990
ISO
11992-1
ISO
11992-2 AMD 1
ISO
11992-2
ISO
11992-3
ISO
11992-4 CORR 1
Ophthalmic Implants - Intraocular Lenses - Part 2:Optical Properties and Test Methods First Edition; Corrigendum 1: 11/1/2003
Ophthalmic Implants - Intraocular Lenses - Part 3: Mechanical Properties and Test Methods Second Edition
Ophthalmic Implants - Intraocular Lenses - Part 4: Labelling and Information First Edition
Ophthalmic Implants - Intraocular Lenses - Part 5: Biocompatibility Second Edition
Ophthalmic implants ù Intraocular lenses ù Part 6: Shelf-life and transport stability Second Edition
Ophthalmic Implants - Intraocular Lenses - Part 7: Clinical Investigations Second Edition
Ophthalmic implants Intraocular lenses Part 8: Fundamental requirements Second Edition
Ophthalmic implants Intraocular lenses Part 9: Multifocal intraocular lenses First Edition
Ophthalmic implants Intraocular lenses Part 10: Phakic intraocular lenses First Edition
Opthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidance for Clinical Investigations First Edition
Ophthalmic optics - Contact lenses and contact lens care products - Determination of physical compatibility of contact lens care
products with contact lenses First Edition
Opthalmic Optics - Contact Lenses - Ageing by Exposure to UV and Visible Radiation First Edition
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidelines for Determination of Preservative Uptake and
Release First Edition
Opthalmic Optics - Contact Lenses - Determination of Self-Life First Edition
Optics and Optical Instruments - Lasers and Laser-Related Equipment - Determination of Laser Resistance of Tracheal Tube Shafts
Second Edition
Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 1: Physical layer
and data-link layer Second Edition
Road vehicles ù Interchange of digital information on electrical connections between towing and towed vehicles ù Part 2: Application
layer for brakes and running gear AMENDMENT 1 Second Edition
Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 2: Application
layer for brakes and running gear Second Edition
Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 3: Application
layer for equipment other than brakes and running gear Second Edition
Road vehicles ù Interchange of digital information on electrical connections between towing and towed vehicles ù Part 4: Diagnostics
TECHNICAL CORRIGENDUM 1 First Edition
Road vehicles ù Interchange of digital information on electrical connections between towing and towed vehicles ù Part 4: Diagnostics
First Edition
Cranes - Availability - Vocabulary Appareils De Levage A Charge Suspendue - Disponibilite - Vocabulaire First Edition
Aircraft - Stability Requirements for Loading and Servicing Equipment First Edition
ISO
ISO
ISO
11992-4
11994
11995
ISO
11997-1
ISO
ISO
11997-2
11998
ISO
12000
ISO
12001
ISO
12003-1
ISO
ISO
ISO
12003-2
12004
12005
ISO
12006-2
ISO
12006-3
ISO
ISO
ISO
12017
12020
12021-1
ISO
ISO
ISO
12039
12040
12042
Plastics - Poly(Methyl Methacrylate) Double- and Triple-Skin Sheets - Test Methods First Edition CEN EN ISO 12 017: 1996
Water Quality - Determination of Aluminium - Atomic Absorption Spectrometric Methods First Edition
Road Vehicles - Sensitivity to Lateral Wind - Part 1: Open- Loop Test Method Using Wind Generator Input First Edition
Stationary Source Emissions - Determination of Carbon Monoxide, Carbon Dioxide and Oxygen - Performance Characteristics and
Calibration of Automated Measuring Systems First Edition
Graphic Technology - Prints and Printing Inks - Assessment of Light Fastness Using Filtered Xenon Arc Light First Edition
Information Technology - Data Compression for Information Interchange - Binary Arithmetic Coding Algorithm First Edition
ISO
12043
Rolling Bearings - Single-Row Cylindrical Roller Bearings - Chamfer Dimensions for Loose Rib and Non-Rib Sides Second Edition
ISO
ISO
12044
12046
Rolling Bearings - Single-Row Angular Contact Ball Bearings - Chamfer Dimensions for Outer Ring Non-Thrust Side First Edition
Synchronous Belt Drives - Automotive Belts - Determination of Physical Properties First Edition
Paints and varnishes Determination of resistance to cyclic corrosion conditions Part 1: Wet (salt fog)/dry/humidity Second Edition
Paints and Varnishes - Determination of Resistance to Cyclic Corrosion Conditions - Part 2: Wet (Salt Fog)/Dry/Humidity/UV Light
First Edition
Paints and varnishes Determination of wet-scrub resistance and cleanability of coatings Second Edition
Plastics/Rubber - Polymer Dispersions and Rubber Latices (Natural and Synthetic) - Definitions and Review of Test Methods Second
Edition
Acoustics - Noise Emitted by Machinery and Equipment - Rules for the Drafting and Presentation of a Noise Test Code First Edition
Agricultural and Forestry Tractors - Narrow-Track Wheeled Tractors - Part 1: Front-Mounted Roll-Over Protective Structures First
Edition
Agricultural and Forestry Tractors - Narrow-Track Wheeled Tractors - Part 2: Rear-Mounted Roll-Over Protective Structures First
Edition
Metallic Materials - Guidelines for the Determination of Forming-Limit Diagrams First Edition
Laser and Laser-Related Equipment - Test Methods for Laser Beam Parameters - Polarization Second Edition
Building Construction - Organization of Information About Construction Works - Part 2: Framework for Classification of Information
First Edition
Building construction ù Organization of information about construction works ù Part 3: Framework for object-oriented information First
Edition [Superseded: BSI BS ISO 12006-3, BSI BS ISO/PAS 12006-3, ISO PAS 12006-3]
ISO
12048
Packaging - Complete, Filled Transport Packages - Compression and Stacking Tests Using a Compression Tester First Edition
ISO
ISO
12052
12056
ISO
ISO
ISO
ISO
12058-1
12076
12078
12080-1
ISO
ISO
12080-2
12081
ISO
ISO
12082
12083
ISO
12085
ISO
12086-1 CORR 1
ISO
12086-1
ISO
12086-2 CORR 1
ISO
12086-2
ISO
12087-1
Health informatics Digital imaging and communication in medicine (DICOM) including workflow and data management First Edition
Aircraft - Self-Propelled Passenger Stairs for Large Capacity Aircraft - Functional Requirements First Edition
Plastics - Determination of Viscosity Using a Falling-Ball Viscometer - Part 1: Inclined-Tube Method First Edition; Cancels and
Replaces Annex B of ISO 9371
Steel Wire Ropes - Determination of the Actual Modulus of Elasticity First Edition
Anhydrous milk fat Determination of sterol composition by gas liquid chromatography (Reference method) First Edition
Dried Skimmed Milk - Determination of Vitamin A Content - Part 1: Colorimetric Method First Edition
Dried Skimmed Milk - Determination of Vitamin A Content - Part 2: Method Using High-Performance Liquid Chromatography First
Edition
Milk - Determination of Calcium Content - Titrimetric Method First Edition
Processed cheese and processed cheese products Calculation of the content of added citrate emulsifying agents and acidifiers/pHcontrolling agents, expressed as citric acid Second Edition;
Information and Documentation - Electronic Manuscript Preparation and Markup First Edition
Geometrical Product Specification (GPS) - Surface Texture: Profile Method - Motif Parameters First Edition; Technical Corrigendum 11998
Plastics ù Fluoropolymer dispersions and moulding and extrusion materials ù Part 1: Designation system and basis for specifications
TECHNICAL CORRIGENDUM 1 Second Edition
Plastics ù Fluoropolymer dispersions and moulding and extrusion materials ù Part 1: Designation system and basis for specifications
Second Edition
Plastics ù Fluoropolymer dispersions and moulding and extrusion materials ù Part 2: Preparation of test specimens and determination
of properties TECHNICAL CORRIGENDUM 1 Second Edition
Plastics ù Fluoropolymer dispersions and moulding and extrusion materials ù Part 2: Preparation of test specimens and determination
of properties Second Edition
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional
Specification - Part 1: Common Architecture for Imaging First Edition
ISO
12087-2
ISO
12087-3
ISO
12087-5
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional
Specification - Part 2: Programmer s Imaging Kernel System Application Program Interface First Edition; Corrigendum 1 09-15-1997
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional
Specification - Part 3: Image Interchange Facility (IIF) First Edition; Amendment 1-1996
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional
Specification - Part 5: Basic Image Interchange Format (BIIF) First Edition; Technical Corrigendum 1: 5/15/2001; Technical
Corrigendum 2: 4/1/2002
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange - Application Program
Interface Language Bindings - Part 4: C First Edition
ISO
12088-4
ISO
ISO
12089
12091
ISO
ISO
12094
12095
ISO
12096
ISO
ISO
ISO
12097-1
12097-2
12097-3
ISO
12098
ISO
12100-1
Information Technology - Computer Graphics and Image Processing - Encoding for the Image Interchange Facility (IIF) First Edition
Structured-Wall Thermoplastics Pipes - Oven Test First Edition
Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing for the Detection of Laminar Imperfections in Strips/Plates Used in
the Manufacture of Welded Tubes First Edition
Seamless and Welded Steel Tubes for Pressure Purposes - Liquid Penetrant Testing First Edition
Submerged Arc-Welded Steel Tubes for Pressure Purposes - Radiographic Testing of the Weld Seam for the Detection of
Imperfections First Edition
Road Vehicles - Airbag Components - Part 1: Vocabulary Vehicules Routiers - Composants Des Sacs Gonflables - Partie 1:
Vocabulaire First Edition
Road Vehicles - Airbag Components - Part 2: Testing of Airbag Modules First Edition
Road Vehicles - Airbag Components - Part 3: Testing of Inflator Assemblies First Edition
Road vehicles Connectors for the electrical connection of towing and towed vehicles 15-pole connector for vehicles with 24 V
nominal supply voltage Second Edition
Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology First Edition; Replaces TR
12100-1
ISO
ISO
ISO
ISO
ISO
ISO
12100-2
12103-1
12103-2
12106
12107
12108
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles First Edition; Replaces TR 12100-2
Road Vehicles - Test Dust for Filter Evaluation - Part 1: Arizona Test Dust First Edition
Road Vehicles - Test Dust for Filter Evaluation - Part 2: Aluminium Oxide Test Dust First Edition
Metallic Materials - Fatigue Testing - Axial-Strain-Controlled Method First Edition
Metallic Materials - Fatigue Testing - Statistical Planning and Analysis of Data First Edition
Metallic Materials - Fatigue Testing - Fatigue Crack Growth Method First Edition
ISO
12114
ISO
12115
ISO
12117
ISO
ISO
12118
12119
ISO
12123
Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Cure Characteristics First Edition
Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Flowability, Maturation and Shelf
Life First Edition; Technical Corrigendum: 11-15-1998
Earth-Moving Machinery - Tip-Over Protection Structure (TOPS) for Compact Excavators - Laboratory Tests and Performance
Requirements First Edition; Technical Corrigendum 1-12-01-2000
Air Cargo Equipment - Identification of Double-Stud Tie-Down Fittings Having an Omnidirectional Rated Load Capacity of 22 250 N (5
000 lbf) or Above First Edition
Information Technology - Software Packages - Quality Requirements and Testing First Edition; AS/NZS 4366: 1996
Raw Optical Glass in Bulk and Preshaped Forms - Bubbles and Other Inclusions - Test Method and Classification First Edition;
Amendment 1: 09/15/2005
ISO
12124
Acoustics - Procedures for the Measurement of Real-Ear Acoustical Characteristics of Hearing Aids First Edition
Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallic Insert) with Metric Fine Pitch Thread - Product Grades A and B
First Edition
ISO
12125
ISO
12126
ISO
12127
ISO
ISO
12128
12129-1
ISO
12129-2
ISO
12130-1
ISO
12130-2
ISO
12130-3
ISO
12131-1
ISO
12131-2
ISO
ISO
ISO
12131-3
12132
12135
ISO
ISO
ISO
ISO
12137-1
12137-2
12138
12140
ISO
12141
Plain Bearings - Part 2: Tolerances on Form and Position and Surface Roughness for Shafts, Flanges and Thrust Collars First Edition
Plain Bearings - Hydrodynamic Plain Tilting Pad Thrust Bearings Under Steady-State Conditions - Part 1: Calculation of Tilting Pad
Thrust Bearings First Edition
Plain Bearings - Hydrodynamic Plain Tilting Pad Thrust Bearings Under Steady-State Conditions - Part 2: Functions for Calculation of
Tilting Pad Thrust Bearings First Edition
Plain Bearings - Hydrodynamic Plain Tilting Pad Thrust Bearings Under Steady-State Conditions - Part 3:Guide Values for the
Calculation of Tilting Pad Thrust Bearings First Edition
Plain Bearings - Hydrodynamic Plain Thrust Pad Bearings Under Steady-State Conditions Part 1: Calculation of Thrust Pad Bearings
First Edition
Plain Bearings - Hydronamic Plain Thrust Pad Bearings under Steady-State Conditions Part 2: Functions for the Calculation of Thrust
Pad Bearings First Edition
Plain Bearings - Hydrodynamic Plain Thrust Pad Bearings under Steady-State Conditions Part 3: Guide Values for the Calculation of
Thrust Pad Bearings First Edition
Plain Bearings - Quality Assurance of Thin-Walled Half Bearings - Design FMEA First Edition
Metallic materials Unified method of test for the determination of quasistatic fracture toughness First Edition
Paints and Varnishes - Determination of Mar Resistance - Part 1: Method Using a Curved Stylus First Edition; Technical Corrigendum
1: 12-15-1998
Paints and Varnishes - Determination of Mar Resistance - Part 2: Method Using a Pointed Stylus First Edition
Textiles - Domestic Laundering Procedures for Textile Fabrics Prior to Flammability Testing First Edition
Agricultural Machinery - Agricultural Trailers and Trailed Equipment - Drawbar Jacks First Edition
Stationary source emissions Determination of mass concentration of particulate matter (dust) at low concentrations Manual
gravimetric method First edition
ISO
ISO
12142
12145
Electronic Imaging - Media Error Monitoring and Reporting Techniques for Verification of Stored Data on Optical Digital Data Disks
Resistance Welding Equipment - Angles for Mounting Spot Welding Electrodes First Edition
Prevailing Torque Type All-Metal Hexagon Nuts with Flange with Metric Fine Pitch Thread - Product Grades A and B First Edition
Clothing for Protection Against Heat and Flame - Determination of Contact Heat Transmission Through Protective Clothing or
Constituent Materials First Edition
Plain Bearings - Lubrication Holes, Grooves and Pockets - Dimensions, Types, Designation and Their Application to Bearing Bushes
Second Edition
Plain Bearings - Part 1: Fits First Edition
ISO
12149
ISO
12151-1
ISO
12151-2
ISO
12151-3
ISO
12151-4
ISO
ISO
ISO
ISO
12151-5
12156-1
12156-2
12161
ISO
ISO
ISO
12162
12164-1
12164-2
ISO
12165
ISO
12166
ISO
12167-1
ISO
12167-2
ISO
12168-1
ISO
ISO
ISO
ISO
ISO
ISO
12168-2
12169
12170
12171
12172
12173
Bolted Bonnet Steel Globe Valves for General-Purpose Applications First Edition
Connections for Hydraulic Fluid Power and General Use - Hose Fittings - Part 1: Hose Fittings with ISO 8434-3 O-Ring Face Seal
Ends First Edition
Connections for hydraulic fluid power and general use Hose fittings Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 cone
connector ends with O-rings First Edition
Connections for Hydraulic Fluid Power and General Use - Hose Fittings - Part 3: Hose Fittings with ISO 6162 Flange Ends First
Edition
Connections for hydraulic fluid power and general use ù Hose fittings ù Part 4: Hose fittings with ISO 6149 metric stud ends First
Edition
Connections for hydraulic fluid power and general use ù Hose fittings ù Part 5: Hose fittings with ISO 8434-2 37 flared ends First
Edition
Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method Second Edition
Diesel fuel ù Assessment of lubricity using the high-frequency reciprocating rig (HFRR) ù Part 2: Limit Second Edition
Road vehicles Endurance braking systems of motor vehicles and towed vehicles Test procedures First Edition
Thermoplastics Materials for Pipes and Fittings for Pressure Applications - Classification and Designation - Overall Service (Design)
Coefficient First Edition (CEN EN ISO 12162: 1995)
Hollow Taper Interface with Flange Contact Surface - Part 1: Shanks - Dimensions First Edition
Hollow Taper Interface with Flange Contact Surface - Part 2: Receivers - Dimensions First Edition
Tools for Moulding - Components of Compression and Injection Moulds and Diecasting Dies - Terms and Symbols Outillage De
Moulage - Composants Des Moulages Par Compression, Moules D'Injection Et Moules Pour Fonderie Sous Pression - Termes Et
Symboles First Edition
Resistance Welding Equipment - Particular Specifications Applicable to Transformers with One Secondary Winding for Multi-Spot
Welding, as Used in the Automobile Industry First Edition
Plain Bearings - Hydrostatic Plain Journal Bearings with Drainage Grooves under Steady-State Conditions - Part 1: Calculation of OilLubricated Plain Journal Bearings with Drainage Grooves First Edition
Plain Bearings - Hydrostatic Plain Journal Bearings with Drainage Grooves under Steady-State Conditions - Part 2: Characteristic
Values for the Calculation of Oil-Lubricated Plain Journal Bearings with Drainage Grooves First Edition
Plain Bearings - Hydrostatic Plain Journal Bearings without Drainage Grooves Under Steady-State Conditions - Part 1: Calculation of
Oil-Lubricated Plain Journal Bearings without Drainage Grooves First Edition
Plain Bearings - Hydrostatic Plain Journal Bearings without Drainage Grooves Under Steady-State Conditions - Part 2: Characteristic
Values for the Calculation of Oil-Lubricated Plain Journal Bearings without Drainage Grooves First Edition
Nickel Oxide - Determination of Nickel Content - Electrolytic Deposition Method First Edition
Gas Welding Equipment - Thermoplastic Hoses for Welding and Allied Processes First Edition
Space Data and Information Transfer Systems - Telecommand - Channel Service Second Edition
Space data and information transfer systems - Telecommand - Data routing service Second Edition
Space data and information transfer systems - telecommand-command operation procedures Second Edition
Space data and information transfer systems Telecommand Architectural specification for the data management service Second
Edition
ISO
12174
ISO
ISO
ISO
12175
12176-1
12176-2
Space Data and Information Transfer Systems - Standard Formatted Data Units - Structure and Construction Rules First Edition
Plastics pipes and fittings Equipment for fusion jointing polyethylene systems Part 1: Butt fusion Second Edition
Plastics Pipes and Fittings - Equipment for Fusion Jointing Polyethylene Systems - Part 2: Electrofusion First Edition
ISO
ISO
12176-3
12176-4
ISO
ISO
ISO
12179
12183
12184
ISO
ISO
12185
12192
Plastics Pipes and Fittings - Equipment for Fusion Jointing Polyethylene Systems - Part 3: Operator's Badge Second Edition
Plastics Pipes and Fittings - Equipment for fusion Jointing Polyethylene Systems - Part 4: Traceability Coding First Edition
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Calibration of Contact (Stylus) Instruments First
Edition; TECHNICAL CORRIGENDUM 1: 12-01-2003
Nuclear fuel technology Controlledpotential coulometric assay of plutonium Second Edition
Determination of Solubility in Nitric Acid of Plutonium in Unirradiated Mixed Oxide Fuel Pellets (U,Pu)O2 First Edition
Crude Petroleum and Petroleum Products - Determination of Density - Oscillating U-Tube Method First Edition; Technical
Corrigendum 1:8-15-2001
Paper and Board - Compressive Strength - Ring Crush Method First Edition
ISO
ISO
ISO
ISO
ISO
12193
12194
12195
12197
12199
ISO
12200
ISO
ISO
12205
12207
ISO
12209-1
ISO
12209-2
ISO
ISO
12209-3
12210-1
Petroleum Products - Determination of the Oxidation Stability of Middle-Distillate Fuels First Edition (CEN EN ISO 12205: 1996)
Information Technology - Software Life Cycle Processes First Edition; Amendment 1: 5/01/2002; Amendment 2: 11/01/2004
Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 1: Yoke Type Connections First
Edition
Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 2: Threaded Connections First
Edition
Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 3: Adaptor for 230 Bar Valves First
Edition
Cranes - Anchoring Devices for In-Service and Out-of-Service Conditions - Part 1: General First Edition
ISO
12210-4
Cranes - Anchoring Devices for In-Service and Out-Of-Service Conditions - Part 4: Jib Cranes Corrigendum 1: 2000; First Edition
Animal and vegetable fats and oils Determination of lead by direct graphite furnace atomic absorption spectroscopy Second Edition
Leaf Tobacco - Determination of Strip Particle Size First Edition
Threshed Tobacco - Determination of Residual Stem Content First Edition
Woodruff Keyseat Cutters - Dimensions First Edition
Alphabetical Ordering of Multilingual Terminological and Lexcographical Data Represented in the Latin Alphabet First Edition
Computer Applications in Terminology - Machine-Readable Terminology Interchange Format (MARTIF) - Negotiated Interchange
First Edition
ISO
ISO
ISO
ISO
ISO
12213-1
12213-2
12213-3
12213-3 DAM 1
12214
ISO
12215-1
ISO
12215-2
Natural gas Calculation of compression factor Part 1: Introduction and guidelines Second Edition
Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis Second Edition
Natural gas Calculation of compression factor Part 3: Calculation using physical properties Second Edition
Natural Gas - Calculation of compression factor - Part 3: Calculation using physical properties 2005
Road Vehicles - Direction-of-Motion Stereotypes for Automotive Hand Controls First Edition
Small Craft - Hull Construction and Scantlings - Part 1: Materials: Thermosetting Resins, Glass-Fibre Reinforcement, Reference
Laminate First Edition
Small Craft - Hull Construction and Scantlings - Part 2: Materials: Core Materials for Sandwich Construction, Embedded Materials
First Edition
ISO
ISO
12215-3
12215-4
Small craft - Hull Construction and Scantlings - Part 3: Materials: Steel, Aluminium Alloys, Wood, Other Materials First Edition
Small Craft - Hull Construction and Scantling - Part 4: Workshop and Manufacturing First Edition
ISO
12216
ISO
12217-1
ISO
12217-2
ISO
ISO
12217-3
12218
ISO
12222
ISO
ISO
12224-1
12224-2
ISO
12224-3
ISO
ISO
ISO
12228
12230
12231
ISO
ISO
ISO
12232
12233
12234-1
Small Craft - Windows, Portlights, Hatches, Deadlights and Doors - Strength and Watertightness Requirements First Edition
Small Craft - Stability and Buoyancy Assessment and Categorization - Part 1: Non-Sailing Boats of Hull Length Greater than or Equal
to 6 m First Edition
Small Craft - Stability and Buoyancy Assessment and Categorization - Part 2: Sailing Boats of Hull Length Greater than or Equal to 6
m First Edition
Small Craft - Stability and Buoyancy Assessment and Categorization - Part 3: Boats of Hull Length Less Than 6 m First Edition
Graphic Technology - Process Control - Offset Platemaking First Edition
Cinematography - Manufacturer-Printed, Latent Image Indentification on 16 mm, 35 mm and 65 mm Motion-Picture Film Specifications and Dimensions Third Edition; Corrigendum 1: 02/01/2004
Solder Wire, Solid and Flux Cored - Specification and Test Methods - Part 1: Classification and Performance Requirements First
Edition
Flux Cored Solder Wire - Specification and Test Methods - Part 2: Determination of Flux Content First Edition
Solder wire, solid and flux cored Specifications and test methods Part 3: Wetting balance test method for flux cored solder wire
efficacy First Edition
Animal and Vegatable Fats and Oils - Determination of Individual and Total Sterols Contents - Gas Chromatographic Method First
Edition
Polybutene (PB) Pipes - Effect of Time and Temperature on the Expected Strength First Edition
Photography Electronic still picture imaging Vocabulary Second Edition
Photography Digital still cameras Determination of exposure index, ISO speed ratings, standard output sensitivity, and
recommended exposure index Second Edition
Photography - Electronic Still-Picture Cameras - Resolution Measurements First Edition
Electronic Still-Picture Imaging - Removable Memory - Part 1: Basic Removable-Memory Module First Edition
ISO
ISO
ISO
ISO
12234-2
12236
12238
12239
ISO
ISO
ISO
ISO
ISO
12240-1
12240-2
12240-3
12240-4
12241
ISO
12243
ISO
12246
ISO
ISO
12248
12256
ISO
12258
Electronic Still-Picture Imaging - Removable Memory - Part 2: TIFF/EP Image Data Format First Edition
Geosynthetics Static puncture test (CBR test) Second Edition
Pneumatic Fluid Power - Directional Control Valves - Measurement of Shifting Time First Edition
Fire detection and fire alarm systems - Smoke alarms First Edition
Spherical Plain Bearings - Part 1: Radial Spherical Plain Bearings First Edition; This First Edition Cancels and Replaces ISO 61241:1987, ISO 6124-2:1982, ISO 6124-3:1982 and ISO 6125:1982
Spherical Plain Bearings - Part 2: Angular Contact Radial Spherical Plain Bearings First Edition
Spherical Plain Bearings - Part 3: Thrust Spherical Plain Bearings First Edition
Spherical Plain Bearings - Part 4: Spherical Plain Bearing Rod Ends First Edition; Corrigendum 1 07/15/1999
Thermal Insulation for Building Equipment and Industrial Installations - Calculation Rules First Edition
Medical gloves made from natural rubber latex Determination of water-extractable protein using the modified Lowry method First
Edition
Information Technology - 8 mm Wide Magnetic Tape Cartridge Dual Azimuth Format for Information Interchange - Helical Scan
Recording First Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DATA/DATDC Format Using 60 m and 90 m Length Tapes First Edition
Aerospace - Drives, Internal, Cruciform, Ribbed - Metric Series First Edition
Aerospace - Bolts, Reduced Bihexagonal Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated
or Uncoated, Strength Classes Less Than or Equal to 1 275 MPa - Dimensions First Edition
ISO
12260
Aerospace - Screws, Pan Head, Internal Offset Cruciform Ribbed or Unribbed Drive, Stepped Shank, Short or Medium Length MJ
Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition
ISO
12261
ISO
12268
ISO
12272
ISO
12273
Aerospace - Screws, Pan Head, Internal Offset Cruciform Ribbed or Unribbed Drive, Pitch Diameter Shank, Long Length MJ
Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition
Aerospace - Nuts, Hexagonal, Plain, Reduced Height, Reduced Across Flats, with MJ Threads, Cls: 450 MPa (at Ambient
Temp.)/425 Degs C, 600 MPA (at Ambient Temp.)/235 Degs C, 600 MPa (at Ambient Temp.)/315 Degs C, 600 MPa (at Ambient
Temp.)/650 Degs C, 900 MPa (at Ambient Temp.)/235 Degs C, 900 MPa (at Ambient Temp.)/730 Degs C and 1 100 MPa (at Ambient
Temp.)/600 Degs C - Dimensions First Edition
Aerospace - Nuts, Anchor, Self-Locking, Floating, Two Lug, with Incremental Counterbore, with MJ Threads, Classifications: 900 MPa
(AT Ambient Temperature)/235 Degrees C, 900 MPa (AT Ambient Temperature)/315 Degrees C and 900 MPa (AT Ambient
Temperature)/425 Degrees C - Dimensions First Edition
Aerospace - Nuts, Anchor, Self-Locking, Floating, Self-Aligning, Two Lug, with MJ Threads, Classifications: 900 MPa (at Ambient
Temperature/235 Degrees Celsius, 900 MPa (at Ambient Temperature)315 Degrees Celsius and 900 MPa (at Ambient
Temperature)425 Degrees Celsius - Dimensions First Edition
ISO
12274
ISO
12277
ISO
ISO
12278
12280
ISO
ISO
ISO
ISO
12281
12288
12289
12290
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
12301
12302
12303
12306
12307-1
12307-2
12308
12319
12333
ISO
ISO
12334
12345
ISO
ISO
12353-1
12353-2
ISO
ISO
ISO
ISO
12357-2
12357 CORR 1
12357
12364
Aerospace - Nuts, Anchor, Self-Locking, Floating, Self-Aligning, Single Lug, with MJ Threads, Classifications: 900 MPa (at Ambient
Temperature/235 Degrees Celsius, 900 MPa (at Ambient Temperature)315 Degrees Celsius and 900 MPa (at Ambient
Temperature)425 Degrees Celsius - Dimensions First Edition
Aerospace - Gang Channel, Self-Locking, Floating, Standard Series, with Counterbore, Classifications: 1 100 MPa (at Ambient
Temperature)/120 Degrees C, 1 100 MPa (at Ambient Temperature)/235 Degrees C and 1 100 MPa (at Ambient Temperature)/425
Degrees C - Dimensions First Edition
Aerospace - Nuts, Barrel, Self-Locking, Floating, Self-Aligning, with MJ Threads, Classifications: 900 MPa (at Ambient
Temperature)/235 Degrees C, 1 100 MPa (at Ambient Temperature)/235 Degrees C, 1 250 MPa (at Ambient Temperature)/235
Degrees C and 1 550 MPa (at Ambient Temperature)/235 Degrees C - Dimensions First Edition
Aerospace - Retainers, Spring, Sheet Metal, for Self-Locking Barrel Nuts - Dimensions First Edition
Aerospace - Rivets, Solid, 100 Degree Normal Countersunk Head, in Metallic Material, with or without Surface Treatment Dimensions First Edition
Aerospace - Rivets, Solid, in Nickel Alloy - Procurement Specification First Edition
Aerospace Rivets, solid, in corrosion-resisting steel Procurement specification First Edition
Aerospace - Rivets, Solid, in Titanium or Titanium Alloy - Procurement Specification First Edition
Plain Bearings - Quality Control Techniques and Inspection of Geometrical and Material Quality Characteristics First Edition;
(Corrigendum 1-1995)
Plain Bearings - Quality Characteristics - Statistical Process Control (SPC) First Edition
Plain Bearings - Quality Characteristics - Calculation of Machine and Process Capabilities First Edition
Plain Bearings - Measurement of Wall Thickness of Thin-Walled Half-Bearings and Thin-Walled Bushes First Edition
Plain Bearings - Wrapped Bushes - Part 1: Checking the Outside Diameter First Edition
Plain Bearings - Checking of Wrapped Bushes - Part 2: Checking the Inside Diameter First Edition
Plain Bearings - Quality Assurance - Sample Types - Definitions, Applications and Testing First Edition
Aerospace'P' (loop style) clamps Procurement specification First Edition
Aerospace - Constant Displacement Hydraulic Motors - General Specifications for 35 000 kPa Systems First Edition
Aerospace - Hydraulic, Pressure-Compensated, Variable Delivery Pumps - General Requirements for 35 000 kPa Systems First
Edition
Diesel engines Cleanliness assessment of fuel injection equipment First Edition
Road Vehicles - Traffic Accident Analysis - Part 1: Vocabulary Vehicules Routiers - Analyse Des Accidents De La Circulation - Partie
1: Vocabulaire First Edition
Road vehicles Traffic accident analysis Part 2: Guidelines for the use of impact severity measures First Edition
Commercial road vehicles ù Drawbar couplings and eyes for rigid drawbars ù Part 2: Strength tests for special applications First
Edition
Commercial road vehicles ù Drawbar couplings and eyes for rigid drawbars ù Strength tests
Commercial Road Vehicles - Drawbar Couplings and Eyes for Rigid Drawbars - Strength Tests First Edition
Two-Wheeled Motorcycles - Antilock Braking Systems (ABS) - Tests and Measurement Methods First Edition
ISO
12366
Two-Wheeled Mopeds - Antilock Braking Systems (ABS) - Tests and Measurement Methods First Edition
ISO
ISO
12368
12374
Agricultural Vehicles - Mechanical Hook-Type Connections on Towing Vehicles - Test Methods and Requirements First Edition
Agricultural Irrigation - Wiring and Equipment for Electrically Driven or Controlled Irrigation Machines First Edition
ISO
ISO
ISO
ISO
ISO
12401
12402-1
12402-2
12402-3
12402-4
ISO
ISO
12402-5 CORR 1
12402-5
ISO
ISO
ISO
ISO
12402-6
12402-7
12402-8
12402-9
ISO
12402-10
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
12460-1
12465
12466-1
12466-2
12468-1
12468-2
12472
12473
12478-1
12480-1
12480-3
12480-4
12482-1
12485
12488-1
Small craft Deck safety harness and safety line for use on recreational craft Safety requirements and test methods First Edition
Personal flotation devices Part 1: Lifejackets for seagoing ships Safety requirements First Edition
Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements First Edition
Personal flotation devices Part 2: Lifejackets, performance level 150 Safety requirements First Edition
Personal flotation devices Part 2: Lifejackets, performance level 100 Safety requirements First Edition
Personal flotation devices ù Part 5: Buoyancy aids (level 50) ù Safety requirements TECHNICAL CORRIGENDUM 1 First Edition
Personal flotation devices ù Part 5: Buoyancy aids (level 50) ù Safety requirements First Edition
Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods
First Edition
Personal flotation devices Part 7: Materials and components Safety requirements and test methods First Edition
Personal flotation devices Part 8: Accessories Safety requirements and test methods First Edition
Personal flotation devices Part 9: Test methods First Edition
Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices First Edition
Wood-based panels ù Determination of formaldehyde release ù Part 1: Formaldehyde emission by the 1-cubic-metre chamber
method First Edition
Plywood ù Specifications First Edition
Plywood - Bonding Quality - Part 1: Test Methods First Edition
Plywood - Bonding Quality - Part 2: Requirements First Edition
External Exposure of Roofs to Fire - Part 1: Test Methods First Edition
External fire exposure to roofs Part 2: Classification of roofs First Edition
Fire resistance of timber door assemblies Method of determining the efficacy of intumescent seals First Edition
General principles of cathodic protection in sea water First Edition
Cranes - Maintenance Manual - Part 1: General First Edition
Cranes - Safe Use - Part 1: General First Edition
Cranes Safe use Part 3: Tower cranes First edition
Cranes ù Safe use ù Part 4: Jib cranes First edition
Cranes - Condition Monitoring - Part 1: General First Edition
Tower Cranes - Stability Requirements First Edition
Cranes Tolerances for wheels and travel and traversing tracks Part 1: General First edition; Supercedes ISO 8306:1985
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
12488-4
12491
12494
12499
12500-1
12500-2
12508
12509
12510
12511
ISO
ISO
ISO
ISO
ISO
ISO
12543-1
12543-2
12543-3
12543-4
12543-5
12543-6
ISO
12567-1
ISO
ISO
12567-2
12569
ISO
12570
Cranes Tolerances for wheels and travel and traversing tracks Part 4: Jib cranes First Edition
Statistical Methods for Quality Control of Building Materials and Components First Edition
Atmospheric icing of structures First Edition
Industrial Fans - Mechanical Safety of Fans - Guarding First Edition
Filters for compressed air ù Test methods ù Part 1: Oil aerosols First Edition
Filters for compressed air ù Test methods ù Part 2: Oil vapours First Edition
Earth-Moving Machinery - Operator Station and Maintenance Areas - Bluntness of Edges First Edition
Earth-moving machinery Lighting, signalling and marking lights, and reflex-reflector devices Second Edition
Earth-moving machinery Operation and maintenance Maintainability guidelines First Edition
Earth-Moving Machinery - Hour Meters First Edition
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 1: Definitions and Description of Componenet Parts First
Edition
Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass First Edition
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 3: Laminated Glass First Edition
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 4: Test Methods for Durability First Edition
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 5: Dimensions and Edge Finishing First Edition
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 6: Appearance First Edition
Thermal Performance of Windows and Doors - Determination of Thermal Transmittance by Hot Box Method - Part 1: Complete
Windows and Doors First Edition
Thermal performance of windows and doors Determination of thermal transmittance by hot box method Part 2: Roof windows and
other projecting windows First Edition
Thermal Performance of Buildings - Determination of Air Change in Buildings - Tracer Gas Dilution Method First Edition
Hydrothermal Performance of Building Materials and Products - Determination of Moisture Content by Drying at Elevated
Temperature First Edition
ISO
12571
Hydrothermal Performance of Building Materials and Products - Determination of Hygroscopic Sorption Properties First Edition
ISO
12572
ISO
ISO
ISO
ISO
ISO
12576-1
12579
12580
12606
12608
ISO
12611
Hygrothermal Performance of Building Materials and Products - Determination of Water Vapour Transmission Properties First Edition
Thermal Insulation - Insulating Materials and Products for Buildings - Conformity Control Systems Part 1: Factory-Made Products
First Edition
Timber structures ù Glued laminated timber ù Method of test for shear strength of glue lines First Edition
Timber structures ù Glued laminated timber ù Methods of test for glue-line delamination First Edition
Cinematography - Care and Preservation of Magnetic Audio Recordings for Motion Pictures and Television First Edition
Cinematography - Room and Surround Conditions for Evaluating Television Display from Telecine Reproduction First Edition
Cinematography Audio head tones for use in international exchange of 35 mm analogue magnetic film masters Specifications and
location Second Edition
ISO
ISO
ISO
ISO
12612
12615
12616
12620
ISO
12625-1
ISO
12625-3
ISO
ISO
ISO
ISO
12625-4
12625-5
12625-6
12625-7
ISO
ISO
ISO
ISO
ISO
ISO
ISO
12625-8
12625-9
12634
12635
12636
12637-1
12637-5
ISO
12639 AMD 1
ISO
12639
ISO
12640
ISO
12640-2
ISO
ISO
12640-3
12641
ISO
ISO
12642
12642-2
Cinematography - Interchange of Post-Production Materials First Edition
Bibliographic references and source identifiers for terminology work First Edition
Translation-Oriented Terminography First Edition
Computer Applications in Terminology - Data Categories First Edition
Tissue paper and tissue products Part 1: General guidance on terms Papier tissu et produits en tissu Partie 1: Lignes directrices
gÚnÚrales relatives aux termes First edition
Tissue paper and tissue products Part 3: Determination of thickness, bulking thickness and apparent bulk density First Edition
Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at break and tensile energy absorption First
Edition
Tissue paper and tissue products Part 5: Determination of wet tensile strength First Edition
Tissue paper and tissue products Part 6: Determination of grammage First Edition
Tissue paper and tissue products ù Part 7: Determination of optical properties First edition
Tissue paper and tissue products Part 8: Water-absorption time and waterabsorption capacity, basket-immersion test method First
edition;
Tissue paper and tissue products Part 9: Determination of ball burst strength First edition
Graphic Technology - Determination of Tack of Paste Inks and Vehicles by a Rotary Tackmeter First Edition
Graphic Technology - Plates for Offset Printing - Dimensions First Edition
Graphic Technology - Blankets for Offset Printing First Edition
Graphic technology Vocabulary Part 1: Fundamental terms First Edition
Graphic Technology - Multilingual Terminology of Printing Arts - Part 5: Screen Printing Terms First Edition
Graphic technology ù Prepress digital data exchange ù Tag image file format for image technology (TIFF/IT) AMENDMENT 1: Use of
JBIG2-Amd2 compression in TIFF/IT
Graphic Technology - Prepress Digital Data Exchange - Tag Image File Format for Image Technology (TIFF/IT) Second Edition
Graphic Technology - Prepress Digital Data Exchange - CMYK Standard Colour Image Data (CMYK/SCID) First Edition; Technical
Corrigendum 1: 09/15/04
Graphic technology Prepress digital data exchange Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID) First
Edition
Graphic technology ù Prepress digital data exchange ù Part 3: CIELAB standard colour image data (CIELAB/SCID) First Edition
Graphic Technology - Prepress Digital Data Exchange - Colour Targets for Input Scanner Calibration First Edition
Graphic technology - Input data for characterization of 4-colour process printing Part 1: Initial data set First Edition; Corrigendum
1:10/1/2005
Graphic technology Input data for characterization of 4-colour process printing Part 2: Expanded data set First Edition
ISO
12643-1
ISO
12643-2
ISO
12644
ISO
ISO
12645
12646
ISO
12647-1
ISO
12647-2 AMD 1
ISO
12647-2
ISO
12647-3
ISO
12647-4
ISO
12647-5
ISO
ISO
ISO
12647-6
12650
12651
ISO
12653-1
ISO
ISO
ISO
ISO
ISO
12653-2
12656
12667
12676
12677
ISO
12678-1
Graphic technology ù Safety requirements for graphic technology equipment and systems ù Part 1: General requirements First
Edition [: ISO 12648, ISO 12648, ISO 12649]
Graphic technology ù Safety requirements for graphic technology equipment and systems ù Part 2: Press equipment and systems
First Edition [Superseded: ISO 12648, ISO 12648]
Graphic Technology - Determination of Rheological Properties of Paste Inks and Vehicles by the Falling Rod Viscometer First Edition
Graphic Technology - Process Control - Certified Reference Material for Opaque Area Calibration of Transmission Densitometers
First Edition
Graphic technology Displays for colour proofing Characteristics and viewing conditions First Edition
Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 1:
Parameters and measurement methods Second Edition
Graphic technology ù Process control for the production of half-tone colour separations, proof and production prints ù Part 2: Offset
lithographic processes Second edition
Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 2: Offset
lithographic processes Second Edition
Graphic technology - Process control for the production of half-tone colour separations, proofs and production prints - Part 3: Coldset
offset lithography on newsprint Second Edition
Graphic technology - Process control for the production of half-tone colour separations, proofs and production prints - Part 4:
Publication gravure printing First Edition
Graphic Technology - Process Control for the Manufacture of Half-Tone Colour Separations, Proof and Production Prints - Part 5:
Screen Printing First Edition
Graphic technology Process control for the production of half-tone colour separations, proofs and production prints Part 6:
Flexographic printing First Edition
Document Imaging Applications - Microfilming of Achromatic Maps on 35 mm Microfilm First Edition
Electronic Imaging - Vocabulary Imagerie Electronique - Vocabulaire First Edition
Electronic Imaging - Test Target for the Black-and-White Scanning of Office Documents - Part 1: Characteristics First Edition
Electronic Imaging - Test Target for the Black-and-White Scanning of Office Documents - Part 2: Method of Use First Edition;
Technical Corrigendum 1 3/1/2002
Micrographics - Use of Bar Codes on Aperture Cards First Edition
Commercial Vehicles and Buses - Cross-Tooth Propeller Shaft Flanges, Type T First Edition
Refractory Products - Determination of Resistance to Carbon Monoxide First Edition
Chemical Analysis of Refractory Products by XRF - Fused Cast Bead Method First Edition
Refractory Products - Measurement of Dimensions and External Defects of Refractory Bricks - Part 1: Dimensions and Conformity to
Drawings First Edition
Refractory Products - Measurement of Dimensions and External Defects of Refractory Bricks - Part 2: Corner and Edge Defects and
Other Surface Imperfections First Edition
Methods of test for refractory products Part 1: Determination of dynamic Young s modulus (MOE) by impulse excitation of vibration
First Edition
Mechanically deposited coatings of zinc Specification and test methods First Edition
Metallic and Other Inorganic Coatings - Automated Controlled Shot-Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel or
Chromium Plating, or as a Final Finish First Edition
Metallic Coatings - Porosity Tests - Humid Sulfur (Flowers of Sulfur) Test First Edition
Non-Destructive Testing - Terminology - Terms Used in Penetrant Testing Essais Non Destructifs - Terminologie - Termes Utilises En
Controle Par Ressuage First Edition
ISO
12678-2
ISO
ISO
12680-1
12683
ISO
ISO
12686
12687
ISO
12706
ISO
ISO
ISO
12710
12713
12714
ISO
ISO
ISO
ISO
12715
12716
12721
12725
ISO
ISO
ISO
12732
12737
12739
ISO
12740
Non-Destructive Testing - Ultrasonic Inspection - Evaluating Electronic Characteristics of Ultrasonic Test Instruments First Edition
Non-Destructive Testing - Acoustic Emission Inspection - Primary Calibration of Transducers First Edition
Non-Destructive Testing - Acoustic Emission Inspection - Secondary Calibration of Acoustic Emission Sensors First Edition
Ultrasonic Non-Destructive Testing - Reference Blocks and Test Procedures for the Characterization of Contact Search Unit Beam
Profiles First Edition
Non-Destructive Testing - Acoustic Emission Inspection - Vocabulary First Edition
Non-Destructive Testing - Thermal Neutron Radiographic Testing - Determination of Beam L/D Ratio First Edition
Nickel and Nickel Alloy Castings First Edition
Corrosion of metals and alloys Electrochemical potentiokinetic reactivation measurement using the double loop method (based on
ihal's method) First Edition
Metallic materials Determination of plane-strain fracture toughness Second Edition
Zinc sulfide concentrates Determination of zinc Ion-exchange/EDTA titrimetric method Second Edition
Lead Sulfide Concentrates - Determination of Silver and Gold Contents - Fire Assay and Flame Atomic Absorption Spectrometric
Method Using Scorification or Cupellation First Edition
ISO
12742
Copper, lead, and zinc sulfide concentrates ù Determination of transportable moisture limits ù Flow-table method Second Edition
ISO
ISO
ISO
12743
12744
12745
ISO
ISO
ISO
ISO
12756
12757-1
12757-2
12771
Copper, lead, zinc and nickel concentrates Sampling procedures for determination of metal and moisture content Second Edition
Copper, lead, zinc and nickel concentrates Experimental methods for checking the precision of sampling Second Edition
Copper, Lead and Zinc Ores and Concentrates - Precision and Bias of Mass Measurement Techniques First Edition
Drawing and Writing Instruments - Ball Point Pens and Roller Ball Pens - Vocabulary Instruments De Dessin Et D'Ecriture - Stylos A
Bille Et Stylos Rollers - Vocabulaire First Edition
Ball Point Pens and Refills - Part 1: General Use First Edition
Ball Point Pens and Refills - Part 2: Documentary Use (DOC) First Edition
Plastics Laboratory Ware - Disposable Serological Pipettes First Edition
ISO
ISO
12772
12775
ISO
12777-1
ISO
ISO
12777-2
12777-3
ISO
ISO
ISO
12789
12790-1
12794
ISO
12795
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
12800
12803
12807
12819
12844
12853
12858-1
12858-2
12858-3
12864
12865
12866
12867
12870
ISO
ISO
ISO
ISO
ISO
ISO
12884
12890
12891-1
12891-2
12891-3
12891-4
Laboratory Glassware - Disposable Microhaematocrit Capillary Tubes First Edition
Guidelines on Types of Glass of Normal Bulk-Production Composition and Their Test Methods First Edition
Methods of Tests for Pallet Joints - Part 1: Determination of Bending Resistance of Pallet Nails, Other Dowel-Type Fasteners and
Staples First Edition
Methods of Tests for Pallet Joints - Part 2: Determination of Withdrawl and Head Pull-Through Resistance of Pallet Nails and Staples
First Edition
Methods of test for pallet joints Part 3: Determination of strength of pallet joints First Edition
Reference Neutron Radiations - Characteristics and Methods of Production of Simulated Workplace Neutron Fields First Edition
Radiation Protection - Performance Criteria for Radiobioassay - Part 1: General Principles First Edition
Nuclear Energy - Radiation Protection - Individual Thermoluminescence Dosemeters for Extremities and Eyes First Edition
Nuclear fuel technology Uranium dioxide powder and pellets Determination of uranium and oxygen/uranium ratio by gravimetric
method with impurity correction First Edition
Nuclear fuel technology Guide to the measurement of the specific surface area of uranium oxide powders by the BET method First
Edition
Representative Sampling of Plutonium Nitrate Solutions for Determination of Plutonium Concentration First Edition
Safe Transport of Radioactive Materials - Leakage Testing on Packages First Edition
Methods of Evaluation of the Battery Life of a Battery-Powered Watch First Edition; Corrigendum 1: 11-01-99
Raw Optical Glass - Grindability with Diamond Pellets - Test Method and Classifiction First Edition
Optics and Optical Instruments - Microscopes - Information Provided to the User First Edition
Optics and Optical Instruments - Ancillary Devices for Geodetic Instruments - Part 1: Invar Levelling Staffs First Edition
Optics and Optical Instruments - Ancillary Devices for Geodetic Instruments - Part 2: Tripods First Edition
Optics and optical instruments Ancillary devices for geodetic instruments Part 3: Tribrachs First Edition
Opthalmic Optics - Contact lenses - Determination of Scattered Light First Edition
Ophthalmic instruments Retinoscopes Second Edition
Ophthalmic Instruments - Perimeters First Edition; Corrected and Reprinted 12-01-1999
Ophthalmic Instruments - Trial Frames First Edition
Ophthalmic optics Spectacle frames Requirements and test methods Second Edition; Replaces ISO 9456:1991
Ambient Air - Determination of Total (Gas and Particle-Phase) Polycyclic Aromatic Hydrocarbons - Collection on Sorbent-Backed
Filters with Gas Chromatographic/Mass Spectrometric Analyses First Edition
Water Quality - Determination of Toxicity to Embryos and Larvae of Freshwater Fish - Semi-Static Method First Edition
Retrieval and Analysis of Surgical Implants - Part 1: Retrieval and Handling First Edition
Retrieval and Analysis of Surgical Implants - Part 2: Analysis of Retrieved Metallic Surgical Implants First Edition
Retrieval and Analysis of Surgical Implants - Part 3: Analysis of Retrieved Polymeric Surgical Implants First Edition
Retrieval and Analysis of Surgical Implants - Part 4: Analysis of Retrieved Ceramic Surgical Implants First Edition
ISO
ISO
12894
12900
ISO
12917-1
ISO
12917-2
ISO
12922
ISO
ISO
12925-1
12937
ISO
12944-1
ISO
12944-2
ISO
12944-3
ISO
12944-4
ISO
12944-5
ISO
12944-6
ISO
12944-7
ISO
ISO
12944-8
12945-1
ISO
12945-2
ISO
12947-1
ISO
12947-2
Ergonomics of the Thermal Environment - Medical Supervision of Individuals Exposed to Extreme Hot or Cold Environments First
Edition
Hard Coal - Determination of Abrasiveness First Edition; Corrected and Reprinted 09/15/1998
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods First Edition
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical DistanceRanging Method First Edition
Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HFAE,
HFAS, HFB, HFC, HFDR and HFDU First Edition; Technical Corrigendum 1: 02/01/2001
Lubricants, Industrial Oils and Related Products (Class L) - Family C (Gears) - Part 1: Specifications for Lubricants for Enclosed Gear
Systems First Edition; Corrigendum 1: 02/15/2002
Petroleum Products - Determination of Water - Coulometric Karl Fischer Titration Method First Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 1: General Introduction First
Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 2: Classification of Environments
First Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 3: Design Considerations First
Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 4: Types of Surface and Surface
Preparation First Edition
Paints and varnishes ù Corrosion protection of steel structures by protective paint systems ù Part 5: Protective paint systems Second
Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 6: Laboratory Performance Test
Methods First Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 7: Execution and Supervision of
Paint Work First Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 8: Development of Specifications
for New Work and Maintenance First Edition
Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 1: Pilling Box Method First Edition
Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 2: Modified Martindale Method First Edition
Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 1: Martindale Abrasion Testing
Apparatus First Edition; Technical Corrigendum 1; 11/01/2002
Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 2: Determination of Specimen
Breakdown First Edition; Technical Corrigendum 1: 11/01/2002
ISO
12947-3
ISO
ISO
12947-4
12951
ISO
12952-1
ISO
12952-2
Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 3: Determination of Mass Loss First
Edition; Technical Corrigendum 1: 11/01/2002
Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 4: Assessment of Appearance
Change First Edition; Technical Corrigendum 1: 11/01/02
Textile Floor Coverings - Determination of Mass Loss Using the Lisson Test First Edition
Textiles - Burning Behaviour of Bedding Items - Part 1: General Test Methods for the Ignitability by a Smouldering Cigarette First
Edition
Textiles - Burning Behaviour of Bedding Items - Part 2: Specific Test Methods for the Ignitability by a Smouldering Cigarette First
Edition
ISO
12952-3
Textiles - Burning Behaviour of Bedding Items - Part 3: General Test Methods for the Ignitability by a Small Open Flame First Edition
ISO
ISO
ISO
ISO
ISO
ISO
12952-4
12956
12957-1
12957-2
12958
12965
ISO
12977
ISO
12979
ISO
12980
ISO
12981-1
ISO
12982-1
ISO
12984
ISO
12985-1
ISO
12985-2
ISO
12986-1
Textiles - Burning Behaviour of Bedding Items - Part 4: Specific Test Methods for the Ignitability by a Small Open Flame First Edition
Geotextiles and Geotextile-Related Products - Determination of the Characteristic Opening Size First Edition
Geosynthetics Determination of friction characteristics Part 1: Direct shear test First Edition
Geosynthetics Determination of friction characteristics Part 2: Inclined plane test First Edition
Geotextiles and Geotextile-Related Products - Determination of Water Flow Capacity in Their Plane First Edition
Butadiene Rubber - Determination of Microstructure by Infra-Red Spectrometry First Edition; Corrigendum 1: 04/15/2006
Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Determination of Volatile Matter Content First
Edition
Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Determination of C/H Ratio in the QuinolineInsoluble Fraction First Edition
Carbonaceous Materials Used in the Production of Aluminium - Green Coke and Calcined Coke for Electrodes - Analysis Using an XRay Fluorescence Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Calcined Coke - Determination of the Reactivity to Carbon Dioxide Part 1: Loss in Mass Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Calcined Coke - Determination of the Reactivity to Air - Part 1:
Ignition Temperature Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Calcined Coke - Determination of Particle Size Distribution First
Edition
Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes and Cathode Blocks - Part 1: Determination of
Apparent Density Using a Dimensions Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes and Cathode Blocks - Part 2: Determination of
Apparent Density and of Open Porosity Using a Hydrostatic Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Prebaked Anodes and Cathode Blocks - Part 1: Determination of
Bending/Shear Strength by a Three-Point Method First Edition
ISO
12986-2
ISO
12987
ISO
12988-1
ISO
12988-2
ISO
12989-1
ISO
ISO
ISO
12989-2
12992
13000-1
ISO
ISO
ISO
ISO
13000-2
13002
13003
13006
ISO
ISO
ISO
ISO
ISO
ISO
ISO
13007-1 CORR 1
13007-1
13007-2 CORR 1
13007-2
13007-3
13007-4
13012
ISO
13041-1
ISO
13041-4
ISO
13041-5
Carbonaceous materials used in the production of aluminium Prebaked anodes and cathode blocks Part 2: Determination of flexural
strength by the four-point method First Edition
Carbonaceous materials for the production of aluminium Anodes, cathodes blocks, sidewall blocks and baked ramming pastes
Determination of the thermal conductivity using a comparative method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes - Determination of the Reactivity to Carbon Dioxide Part 1: Loss in Mass Method First Edition
Carbonaceous materials used in the production of aluminium Baked anodes Determination of the reactivity to carbon dioxide Part 2:
Thermogravimetric method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes and Sidewall Blocks - Determination of the Reactivity
to Air- Part 1: Loss in Mass Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes and Sidewall Blocks - Determination of the Reactivity
to Air- Part 2: Thermogravimetric method First Edition
Plastics - Vertical Flame Spread Determination for Film and Sheet First Edition
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation Second Edition
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of
properties Second Edition
Carbon Fibre - Designation System for Filament Yarns First Edition
Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions First Edition
Ceramic Tiles - Definitions, Classification, Characteristics and Marking First Edition
Ceramic tiles ù Grouts and adhesives ù Part 1: Terms, definitions and specifications for adhesives TECHNICAL CORRIGENDUM 1
First Edition
Ceramic tiles ù Grouts and adhesives ù Part 1: Terms, definitions and specifications for adhesives First Edition
Ceramic tiles ù Grouts and adhesives ù Part 2: Test methods for adhesives TECHNICAL CORRIGENDUM 1 First Edition
Ceramic tiles Grouts and adhesives Part 2: Test methods for adhesives First Edition
Ceramic tiles Grouts and adhesives Part 3: Terms, definitions and specifications for grouts First Edition
Ceramic tiles Grouts and adhesives Part 4: Test methods for grouts First Edition
Rolling Bearings, Linear Motion, Recirculating Ball, Sleeve Type - Accessories First Edition; Corrigendum 1: 04/15/1999
Test conditions for numerically controlled turning machines and turning centres Part 1: Geometric tests for machines with a
horizontal workholding spindle First Edition
Test conditions for numerically controlled turning machines and turning centres Part 4: Accuracy and repeatability of positioning of
linear and rotary axes First Edition
Test conditions for numerically controlled turning machines and turning centres Part 5: Accuracy of feeds, speeds and interpolations
First Edition
ISO
13041-6
Test conditions for numerically controlled turning machines and turning centres Part 6: Accuracy of a finished test piece First edition
ISO
13041-7
ISO
ISO
13041-8
13050
ISO
13090-1
ISO
13091-1
ISO
ISO
ISO
13091-2
13200
13202
ISO
13203
ISO
ISO
ISO
13210
13211-1
13211-2
ISO
13212
ISO
ISO
13213
13215-1
ISO
13215-2
ISO
13215-3
ISO
13216-1
ISO
13216-2
ISO
ISO
13216-3
13218
Test conditions for numerically controlled turning machines and turning centres Part 7: Evaluation of contouring performance in the
coordinate planes First Edition
Test conditions for numerically controlled turning machines and turning centres Part 8: Evaluation of thermal distortions First Edition
Curvilinear Toothed Synchronous Belt Drive Systems First Edition
Mechanical Vibration and Shock - Guidance on Safety Aspects of Tests and Experiments with People - Part 1: Exposure to WholeBody Mechanical Vibration and Repeated Shock First Edition
Mechanical Vibration - Vibrotactile Perception Thresholds for the Assessment of Nerve Dysfunction - Part 1: Methods of
Measurement at the Fingertips First Edition
Mechanical vibration Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 2: Analysis and interpretation
of measurements at the fingertips First Edition
Cranes - Safety Signs and Hazard Pictorials - General Principles First Edition
Cranes - Measurement of Velocity and Time Parameters First Edition
Chains, sprockets and accessories List of equivalent terms Cha¯ nes, roues dentÚes et accessoires Liste des termes Úquivalents
Cha¯ nes, roues dentÚes et accessoires Liste des termes Úquivalents First Edition
Information Technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for
Measuring Conformance to POSIX Standards Second Edition; IEEE Std 2003
Information Technology - Programming Languages - Prolog - Part 1: General Core First Edition
Information Technology - Programming Languages - Prolog - Part 2: Modules First Edition
Ophthalmic Optics - Contact Lens Care Products - Guidelines for Determination of Shelf-Life First Edition; Corrected and Reprinted
12-01-1999
Information Technology - Microprocessor Systems - Control and Status Registers (CSR) Architecture for Microcomputer Buses First
Edition; ANSI/IEEE 1212
Road vehicles Reduction of misuse risk of child restraint systems Part 1: Forms for field studies First Edition
Road Vehicles - Reduction of Misuse Risk of Child Restraint Systems - Part 2: Requirements and Test Procedures for Correct
Installation (Panel Method) First Edition
Road Vehicles - Reduction of Misuse Risk of Child Restraint Systems - Part 3: Prediction and Assessment of Misuse by Misuse Mode
and Effect Analysis (MMEA) First Edition
Road vehicles Anchorages in vehicles and attachments to anchorages for child restraint systems Part 1: Seat bight anchorages and
attachments First Edition; Amendment 1: 02/15/2006; Amendment 3: 07/01/2006
Road vehicles Anchorages in vehicles and attachments to anchorages for child restraint systems Part 2: Top tether anchorages and
attachments First Edition
Road vehicles Anchorages in vehicles and attachments to anchorages for child restraint systems Part 3: Classification of child
restraint dimensions and space in vehicle First Edition
Road Vehicles - Child Restraint Systems - Report Form for Accidents Involving Child Passengers First Edition
ISO
ISO
13226 CORR 1
13226
ISO
13232-1
ISO
13232-2
ISO
13232-3
ISO
13232-4
ISO
13232-5
ISO
13232-6
ISO
13232-7
ISO
ISO
13232-8
13235-1
ISO
ISO
ISO
13235-3
13236
13238-3
ISO
13239
ISO
13240
ISO
13241
ISO
13242
ISO
13244
Rubber ù Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers TECHNICAL
CORRIGENDUM 1 Second Edition
Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1:
Definitions, symbols and general considerations Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 2:
Definition of impact conditions in relation to accident data Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3:
Motorcyclist anthropometric impact dummy Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 4:
Variables to be measured, instrumentation and measurement procedures Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5:
Injury indices and risk/benefit analysis Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Fullscale impact-test procedures Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7:
Standardized procedures for performing computer simulations of motorcycle impact tests Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8:
Documentation and reports Second Edition
Information Technology - Open Distributed Processing - Trading Function: Specification First Edition
Information Technology - Open Distributed Processing - Trading Function - Part 3: Provision of Trading Function Using OSI Directory
Service First Edition; Technical Corrigendum 1: 06/15/2006
Information Technology - Quality of Service: Framework First Edition
Information Technology - Data Management - Part 3: IRDS Export/Import Facility First Edition
Information Technology - Telecommunications and Information Exchange between Systems - High-Level Data Link Control (HDLC)
Procedures Third Edition; Replaces ISO/IEC 3309, 7809, 8471, and 8885
Information Technology Document Description and Processing Languages Interchange Standard for Multimedia Interactive
Documents (ISMID) First Edition; Technical Corrigendum 1: 3/15/2003
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Route Restriction Class Additional Network Feature First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Route Restriction Class Additional Network Feature First Edition
Information Technology - Open Distributed Management Architecture First Edition; Amendment 1: 09/01/1999; Support Using
Common Object Request Broker Architecture (CORBA)
Information Technology - Telecommunications and Information Exchange between Systems - Broadband Private Integrated Services
Network - Inter-Exchange Signalling Protocol - Signalling ATM Adaptation Layer First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Broadband Private Integrated Services
Network - Inter-Exchange Signalling Protocol - Basic Call/Connection Control First Edition
ISO
13246
ISO
13247
ISO
ISO
ISO
ISO
13249-1
13249-2
13249-3
13249-5
Information technology ù Database languages ù SQL multimedia and application packages ù Part 1: Framework Third edition
Information technology Database languages SQL multimedia and application packages Part 2: Full-Text Second Edition
Information technology Database languages SQL multimedia and application packages Part 3: Spatial Third Edition
Information technology Database languages SQL multimedia and application packages Part 5: Still image Second Edition
ISO
ISO
ISO
13249-6
13250-2
13250-3
ISO
13251
ISO
ISO
13252
13253
Information technology Database languages SQL multimedia and application packages Part 6: Data mining Second Edition
Information technology Topic Maps Part 2: Data model First Edition
Information technology ù Topic Maps ù Part 3: XML syntax First edition [Replaced: ISO 13250, ISO 13250]
Collection of graphical symbols for office equipment Collection de symboles graphiques pour matÚriel de bureau First Edition;
Replaces ISO/IEC 4062 and 6329
Information Technology - Enhanced Communications Transport Service Definition First Edition; ITU-T Rec.X.605 1998; Replaces ISO
8880-1 and 8000-3: 1990
Ducted Air-Conditioners and Air-to-Air Heat Pumps - Testing and Rating for Performance First Edition
ISO
13256-1
ISO
13256-2
Water-Source Heat Pumps - Testing and Rating for Performance - Part 1: Water-to-Air and Brine-to-Air Heat Pumps First Edition
Water-Source Heat Pumps - Testing and Rating for Performance - Part 2: Water-to-Water and Brine-to-Water Heat Pumps First
Edition
ISO
13261-1
Sound Power Rating of Air-Conditioning and Air-Source Heat Pump Equipment - Part 1: Non-Ducted Outdoor Equipment First Edition
ISO
13261-2
Sound Power Rating of Air-Conditioning and Air-Source Heat Pump Equipment - Part 2: Non-Ducted Indoor Equipment First Edition
ISO
13276
ISO
13281
ISO
13281-2
ISO
ISO
ISO
13284
13287
13291
Tobacco and Tobacco Poducts - Determination of Nicotine Purity - Gravimetric Method Using Tungstosilicic Acid First Edition
Industrial Automation Systems - Manufacturing Automation Programming Environment (MAPLE) - Functional Architecture First
Edition
Industrial Automation Systems and Integration - Manufacturing Automation Programming Environment (MAPLE) - Part 2: Services
and Interfaces First Edition
Fork-Lift Trucks - Fork-Arm Extentsions and Telescopic Fork Arms - Technical Characteristics and Strength Requirements First
Edition
Personal protective equipment Footwear Test method for slip resistance First Edition;:1993
Zinc Sulfide Concentrates - Determination of Zinc - Solvent Extraction and EDTA Titrimetric Method Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
13292
13294
13295
13296
13297
13299
13300-1
Copper, lead, zinc and nickel concentrates - Experimental methods for checking the bias of sampling Second Edition
Dental Handpieces - Dental Air-Motors First Edition
Dentistry - Mandrels for rotary instruments Second Edition
Diesel Engines - High-Pressure Fuel Injection Pipe Assemblies - General Requirements and Dimensions Second edition
Small Craft - Electrical Systems - Alternating Current Installations Second Edition
Sensory Analysis - Methodology - General Guidance for Establishing a Sensory Profile First Edition
Sensory analysis General guidance for the staff of a sensory evaluation laboratory Part 1: Staff responsibilities First Edition
Sensory analysis General guidance for the staff of a sensory evaluation laboratory Part 2: Recruitment and training of panel leaders
First Edition
Sensory Analysis - Methodology - General Guidance for Measuring Odour, Flavour and Taste Detection Thresholds by a ThreeAlternative Forced-Choice (3-AFC) Procedure First Edition
Sensory analysis Methods for assessing modifications to the flavour of foodstuffs due to packaging First Edition
Iron Ores - Determination of Zinc Content - Flame Atomic Absorption Spectrometric Method First Edition; Together with ISO 13311, It
Cancels and Replaces ISO 8753: 1987
Iron Ores - Determination of Lead Content - Flame Atomic Absorption Spectrometric Method First Edition; Together with ISO 13310, it
Cancels and Replaces ISO 8753: 1987
Iron ores Determination of potassium Flame atomic absorption spectrometric method Second Edition
Iron ores Determination of sodium Flame atomic absorption spectrometric method Second Edition
Determination of Particle Size Distribution by Gravitational Liquid Sedimentation Methods - Part 1: General Principles and Guidelines
First Edition
ISO
13300-2
ISO
ISO
13301
13302
ISO
13310
ISO
ISO
ISO
13311
13312
13313
ISO
13317-1
ISO
13317-2
ISO
13317-3
ISO
13318-1
ISO
13318-2
Determination of Particle Size Distribution by Gravitational Liquid Sedimentation Methods - Part 2: Fixed Pipette Method First Edition
Determination of Particle Size Distribution by Gravitational Liquid Sedimentation Methods - Part 3: X-Ray Gravitational Technique
First Edition
Determination of Particle Size Distribution by Centrifugal Liquid Sedimentation Methods - Part 1: General Principles and Guidelines
First Edition
Determination of particle size distribution by centrifugal liquid sedimentation methods ù Part 2: Photocentrifuge method Second
Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
13318-3
13319
13320-1
13321
13322-1
13322-2
13325
Determination of particle size distribution by centrifugal liquid sedimentation methods Part 3: Centrifugal X-ray method First Edition
Determination of particle size distributions ù Electrical sensing zone method Second Edition
Particle Size Analysis - Laser Diffraction Methods - Part 1: General Principles First Edition
Particle Size Analysis - Photon Correlation Spectroscopy First Edition
Particle size analysis Image analysis methods Part 1: Static image analysis methods First Edition
Particle size analysis Image analysis methods Part 2: Dynamic image analysis methods First Edition
Tyres - Coast-by Methods for Measurement of Tyre-to-Road Sound Emission First Edition
ISO
ISO
ISO
13326
13328
13331
ISO
ISO
13332
13333
ISO
ISO
ISO
ISO
ISO
ISO
ISO
13335-1
13337
13338
13340
13341
13342
13344
ISO
13346-1
ISO
13346-2
ISO
13346-3
ISO
13346-4
ISO
13346-5
ISO
13347-1 CORR 1
ISO
13347-1
ISO
13347-2 CORR 1
ISO
13347-2
ISO
13347-3 CORR 1
Test Methods for Measuring Tyre Uniformity First Edition
Motorcycle Tyres - Measurement of Tyre Rolling Cirumference - Loaded New Tyres First Edition
Road Vehicles - Filler Pipes and Openings of Motor Vehicle Fuel Tanks - Vapour Recovery System First Edition
Reciprocating Internal Combustion Engines - Test Code for the Measurement of Structure-Borne Noise Emitted From High-Speed
and Medium-Speed Reciprocating Internal Combustion Engines Measured at the Engine Feet First Edition
Earth-Moving Machinery - Dumper Body Support and Operators Cab Tilt Support Devices First Edition
Information technology Security techniques Management of information and communications technology security Part 1: Concepts
and models for information and communications technology security management First Edition; Cancels and Replaces ISO/IEC TR
1335-1:1996 and ISO/IEC TR 13335-2:1997
Spring-Type Straight Pins - Slotted, Light Duty First Edition
Determination of Tissue Corrosiveness of a Gas or Gas Mixture First Edition
Transportable Gas Cylinders - Cylinder Valves for Non-Refillable Cylinders - Specification and Prototype Testing First Edition
Transportable Gas Cylinders - Fitting of Valves to Gas Cylinders First Edition; Technical Corrigendum 1: 1998
Small Craft - Static Thrust Measurement for Outboard Motors First Edition
Estimation of the lethal toxic potency of fire effluents Second Edition
Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for
Information Interchange - Part 1: General First Edition
Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for
Information Interchange - Part 2: Volume and Boot Block Recognition First Edition
Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for
Information Interchange - Part 3: Volume Structure Second Edition
Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for
Information Interchange - Part 4: File Structure Second Edition
Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for
Information Interchange - Part 5: Record Structure First Edition
Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 1: General overview
TECHNICAL CORRIGENDUM 1 First Edition
Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 1: General overview First
Edition
Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 2: Reverberant room
method TECHNICAL CORRIGENDUM 1 First Edition
Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 2: Reverberant room
method First Edition
Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 3: Enveloping surface
methods TECHNICAL CORRIGENDUM 1 First Edition
Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 3: Enveloping surface
methods First Edition
Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 4: Sound intensity method
TECHNICAL CORRIGENDUM 1 First Edition
Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 4: Sound intensity method
First Edition
Industrial fans ù Tolerances, methods of conversion and technical data presentation Second Edition
Industrial Fans - Vocabulary and Definitions of Categories First Edition
Industrial Fans - Performance Testing of Jet Fans First Edition
Industrial Fans - Dimensions First Edition
Packaging - Complete, Filled Transport Packages and Unit Loads - Vertical Random Vibration Test First Edition
ISO
13347-3
ISO
13347-4 CORR 1
ISO
ISO
ISO
ISO
ISO
ISO
13347-4
13348
13349
13350
13351
13355
ISO
13356
ISO
ISO
ISO
13357-1
13357-2
13358
ISO
ISO
ISO
ISO
13359
13362
13363
13366-1
ISO
ISO
ISO
13366-2
13370
13372
ISO
13373-1
ISO
13373-2
ISO
13374-1
ISO
13374-2
Condition Monitoring and Diagnostics of Machines - Vibration Condition Monitoring - Part 1: General Procedures First Edition
Condition monitoring and diagnostics of machines Vibration condition monitoring Part 2: Processing, analysis and presentation of
vibration data First Edition
Condition Monitoring and Diagnostics of Machines - Data Processing, Communication and Presentation - Part 1: General Guidelines
First Edition
Condition monitoring and diagnostics of machines ù Data processing, communication and presentation ù Part 2: Data processing
First Edition
ISO
13379
Condition monitoring and diagnostics of machines General guidelines on data interpretation and diagnostics techniques First Edition
Implants for Surgery - Ceramic Materials Based on Yttria-Stabilized Tetragonal Zirconia (Y-TZP) First Edition; BS 7253: Part 6: 1997
Petroleum Products - Determination of the Filterability of Lubricating Oils - Part 1: Procedure for Oils in the Presence of Water First
Edition
Petroleum products Determination of the filterability of lubricating oils Part 2: Procedure for dry oils Second Edition
Water Quality - Determination of Easily Released Sulfide First Edition
Measurement of Conductive Liquid Flow in Closed Conduits - Flanged Electromagnetic Flowmeters - Overall Length First Edition
Flexible Cellular Polymeric Materials - Determination of Compression Set Under Humid Conditions First Edition
Rubber and plastics hoses for marineengine wet-exhaust systems Specification First Edition
Milk - Enumeration of Somatic Cells - Part 1: Microscopic Method First Edition
Milk Enumeration of somatic cells Part 2: Guidance on the operation of fluoro-opto-electronic counters Second Edition; Supersedes
ISO 13366-3: 1997
Thermal Performance of Buildings - Heat Transfer Via the Ground - Calculation Methods First Edition
Condition monitoring and diagnostics of machines Vocabulary First Edition
ISO
ISO
13380
13381-1
ISO
13395
Condition Monitoring and Diagnostics of Machines - General Guidelines on Using Performance Parameters First Edition
Condition monitoring and diagnostics of machines Prognostics Part 1: General guidelines First Edition
Water Quality - Determination of Nitrite Nitrogen and Nitrate Nitrogen and the Sum of Both by Flow Analysis (CFA and FIA) and
Spectrometric Detection First Edition
ISO
ISO
ISO
ISO
ISO
13397-1
13397-2
13397-3
13397-4
13398
Periodontal Curettes, Dental Scalers and Excavators - Part 1: General Requirements First Edition (CEN EN ISO 13 397-1: 1995)
Dentistry Periodontal curettes, dental scalers and excavators Part 2: Periodontal curettes of Gr-type Second Edition
Periodontal Curettes, Dental Scalers and Excavators - Part 3: Dental Scalers - H-Type First Edition
Periodontal Curettes, Dental Scalers and Excavators - Part 4: Dental Excavators - Discoid Type First Edition
Refrigerated Light Hydrocarbon Fluids - Liquefied Natural Gas - Procedure for Custody Transfer on Board Ship First Edition
ISO
13399-1
ISO
13402
ISO
ISO
13403
13404
ISO
13405-1
ISO
13405-2
ISO
ISO
13405-3
13406-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
13406-2
13407
13408-1
13408-2
13408-3
13408-4
13408-5
13408-6
13411
13412
13413
Cutting tool data representation and exchange Part 1: Overview, fundamental principles and general information model First Edition
Surgical and Dental Hand Instruments - Determination of Resistance Against Autoclaving, Corrosion and Thermal Exposure First
Edition
Information Technology - Information Interchange on 300 mm Optical Disk Cartridges of the Write Once, Read Multiple (WORM)
Type Using the CCS Method First Edition
Prosthetics and orthotics ù Categorization and description of external orthoses and orthotic components First Edition
Prosthetics and Orthotics - Classification and Description of Prosthetic Components - Part 1: Classification of Prosthetic Components
First Edition
Prosthetics and Orthotics - Classification and Description of Prosthetic Components - Part 2: Description of Lower-Limb Prosthetic
Components First Edition
Prosthetics and Orthotics - Classification and Description of Prosthetic Components - Part 3: Description of Upper-Limb Prosthetic
Components First Edition
Ergonomic Requirements for Work with Visual Displays Based on Flat Panels - Part 1: Introduction First Edition
Ergonomic Requirements for Work with Visual Displays Based on Flat Panels - Part 2: Ergonomic Requirements for Flat Panel
Displays First Edition
Human-Centered Design Processes for Interactive Systems First Edition
Aseptic Processing of Health Care Products - Part 1: General Requirements First Edition
Aseptic Processing of Health Care Products - Part 2: Filtration First Edition
Aseptic processing of health care products Part 3: Lyophilization First Edition
Aseptic processing of health care products Part 4: Clean-in-place technologies First Edition
Aseptic processing of health care products Part 5: Sterilization in place First Edition
Aseptic processing of health care products Part 6: Isolator systems First Edition
Aerospace - Airframe Needle Roller, Cylindrical Roller and Track Roller Bearings - Technical Specification First Edition
Aerospace - Airframe Needle Track Roller, Yoke Type, Singled-Row, Sealed - Inch Series First Edition
Aerospace - Airspace Needle Track Roller, Yoke Type, Double-Row, Sealed - Inch Series First Edition
ISO
ISO
ISO
ISO
ISO
13414
13415
13416
13417
13419
ISO
ISO
13420
13421
ISO
ISO
ISO
ISO
ISO
ISO
ISO
13422
13426-1
13426-2
13427
13428
13431
13433
ISO
13437
ISO
ISO
ISO
ISO
ISO
13438
13440
13441-1
13441-2
13443
ISO
13445
ISO
13448-1
ISO
13448-2
ISO
ISO
ISO
ISO
13450
13457
13459
13460
Aerospace - Airframe Needle Roller Bearings, Single-Row, Shielded - Inch Series First Edition
Aerospace - Airframe Needle Track Roller, Stud Type, Single-Row, Sealed - Inch Series First Edition
Aerospace - Airframe Needle Track Roller, Yoke Type, Single-Row, Sealed - Metric Series First Edition
Aerospace - Airframe Needle Track Roller, Stud Type, Single-Row, Sealed - Metric Series First Edition
Space data and information transfer systems - packet telemetry Second Edition
Space Data and Information Transfer Systems - Advanced Orbiting Systems - Networks and Data Links - Architectural Specification
First Edition
Information Technology - Data Interchange on 12,7 mm, 48-Track Magnetic Tape Cartridges - DLT 1 Format First Edition
Information Technology - Data Interchange on 90 mm Flexible Disk Cartridges 10 MByte Capacity Using Sector Servo Tracking - ISO
Type 304 First Edition
Geotextiles and Geotextile-Related Products - Strength of Internal Structural Junctions - Part 1: Geocells First Edition
Geotextiles and geotextile-related products Strength of internal structural junctions Part 2: Geocomposites First edition
Geotextiles and Geotextile-Related Products - Abrasion Damage Simulation (Sliding Block Test) First Edition
Geosynthetics Determination of the protection efficiency of a geosynthetic against impact damage First Edition
Geotextiles and Geotextile-Related Products - Determination of Tensile Creep and Creep Rupture Behaviour First Edition
Geotextiles and Geotextile-Related Products - Determination of Tensile Creep and Creep Rupture Behaviour First Edition
Geotextiles and Geotextile-Related Products - Method for Installing and Extracting Samples in Soil, and Testing Specimens in
Laboratory First Edition
Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation First Edition;
Supersedes ISO TR 13438
Equipment for Crop Protection - Agricultural Sprayers - Determination of the Volume of Total Residual First Edition
Air-Assisted Agricultural Sprayers - Data Sheets - Part 1: Typical Layout First Edition
Air-Assisted Agricultural Sprayers - Data Sheets - Part 2: Technical Specifications Related to Components First Edition
Natural Gas - Standard Reference Conditions First Edition
Adhesives - Determination of Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method First Edition
Second Edition
Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 1: Guidelines for the APP approach First
Edition
Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 2: Coordinated single sampling plans for
acceptance sampling by attributes First Edition
Photography - 110-Size Cartridge, Film and Backing Paper - Dimensions First Edition; Replaces ISO 7374, 7330 and 7261;
Corrigendum 1: 9/1/2001
Agricultural Irrigation Equipment - Water-Driven Chemical Injector Pumps First Edition
Earth-Moving Machinery - Dumpers - Trainer Seat/Enclosure First Edition
Agricultural Irrigation Equipment - Plastics Saddles for Polyethylene Pressure Pipes First Edition
ISO
13463
ISO
ISO
13464
13465
ISO
13468-1
Nuclear-Grade Plutonium Dioxide Powder for Fabrication of Light Water Reactor MOX Fuel - Guidelines to Help in the Definition of a
Product Specification First Edition
Simultaneous Determination of Uranium and Plutonium in Dissolver Solutions from Reprocessing Plants - Combined Method Using KAbsorption Edge and X-ray Fluorescence Spectrometry First Edition
Determination of Neptunium in Nitric Acid Solutions by Molecular Absorption Spectrophotometry First Edition
Plastics - Determination of the Total Luminous Transmittance of Transparent Materials - Part 1: Single-Beam Instrument First Edition
CEN EN ISO 13 468-1: 1996
ISO
13468-2
Plastics - Determination of the Total Luminous Transmittance of Transparent Materials - Part 2: Double-Beam Instrument First Edition
ISO
ISO
13472-1
13473-1
ISO
13473-2
Acoustics - Measurement of Sound Absorption Properties of Road Surfaces in Situ - Part 1: Extended Surface Method First Edition
Characterization of Pavement Texture by Use of Surface Profiles - Part 1: Determination of Mean Profile Depth First Edition
Characterization of Pavement Texture by use of Surface Profiles - Part 2: Terminology and Basic Requirements Related to Pavement
Texture Profile Analysis First Edition
ISO
13473-3
ISO
13475-1
ISO
13476
ISO
13477
ISO
13478
ISO
ISO
13479
13480
Road Vehicles - Ignition Coils - Electrical Characteristics and Test Methods First Edition; Technical Corrigendum 1: 04-01-1999
Thermoplastics Pipes for the Conveyance of Fluids - Determination of Resistance to Rapid Crack Propagation (RCP) - Small-Scale
Steady-State Test (S4 Test) First Edition
Thermoplastics pipes for the conveyance of fluids ù Determination of resistance to rapid crack propagation (RCP) ù Full-scale test
(FST) Second Edition
Polyolefin Pipes for the Conveyance of Fluids - Determination of Resistance to Crack Propagation - Test Method for Slow Crack
Growth on Notched Pipes (Notch Test) First Edition
Polyethylene Pipes - Resistance to Slow Crack Growth - Cone Test Method First Edition
ISO
ISO
13481
13485
Information Technology - Data Interchange on 130 mm Optical Disk Cartridges - Capacity: 1 Gigabyte per Cartridge First Edition
Medical devices Quality management systems Requirements for regulatory purposes Second Edition
ISO
ISO
13486-1
13488
ISO
13490-1
Characterization of pavement texture by use of surface profiles Part 3: Specification and classification of profilometers First edition
Acoustics - Stationary Audible Warning Devices Used Outdoors - Part 1: Field Measurements for Determination of Sound Emission
Quantities First Edition
Road Vehicles - Hydraulic Braking Systems - Part 1: Double-Flare Pipes, Tapped Holes, Male Fittings and Tube Seats First Edition
Quality Systems - Medical Devices - Particular Requirements for the Application of ISO 9002 First Edition
Information Technology - Volume and File Structure of Read-Only and Write-Once Compact Disk Media for Information Interchange Part 1: General First Edition
ISO
ISO
13490-2
13491-1
ISO
ISO
ISO
ISO
ISO
ISO
13491-2
13492
13493
13496
13500
13501
ISO
13503-1
ISO
13503-2
ISO
ISO
13503-3 CORR 1
13503-3
ISO
13503-4
ISO
ISO
ISO
13503-5
13520
13521
ISO
13522-1
ISO
13522-3
ISO
13522-4
ISO
13522-5
ISO
13522-6
ISO
13522-7
Information Technology - Volume and File Structure of Read-Only and Write-Once Compact Disk Media for Information Interchange Part 2: Volume and File Structure First Edition
Banking ù Secure cryptographic devices (retail) ù Part 1: Concepts, requirements and evaluation methods Second Edition
Banking Secure cryptographic devices (retail) Part 2: Security compliance checklists for devices used in financial transactions
Second Edition
Banking - Key Management Related Data Element (Retail) First Edition
Meat and Meat Products - Determination of Chloramphenicol Content - Method Using Liquid Chromatography First Edition
Meat and Meat Products - Detection of Colouring Agents - Method Using Thin-Layer Chromatography First Edition
Petroleum and natural gas industries Drilling fluid materials Specifications and tests Second Edition
Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation First Edition
Petroleum and natural gas industries Completion fluids and materials Part 1: Measurement of viscous properties of completion fluids
First edition
Petroleum and natural gas industries Completion fluids and materials Part 2: Measurement of properties of proppants used in
hydraulic fracturing and gravel-packing operations First Edition
Petroleum and natural gas industries ù Completion fluids and materials ù Part 3: Testing of heavy brines TECHNICAL
CORRIGENDUM 1 First Edition
Petroleum and natural gas industries ù Completion fluids and materials ù Part 3: Testing of heavy brines First Edition
Petroleum and natural gas industries Completion fluids and materials Part 4: Procedure for measuring stimulation and gravel-pack
fluid leakoff under static conditions First Edition
Petroleum and natural gas industries Completion fluids and materials Part 5: Procedures for measuring the long-term conductivity of
proppants First Edition
Determination of Ferrite Content in Austenitic Stainless Steel Castings First Edition
Austenitic Manganese Steel Castings First Edition
Information Technology - Coding of Multimedia and Hypermedia Information - Part 1: MHEG Object Representation - Base Notation
(ASN.1) First Edition
Information Technology - Coding of Multimedia and Hypermedia Information - Part 3: MHEG Script Interchange Representation First
Edition
Information Technology - Coding of Multimedia and Hypermedia Information - Part 4: MHEG Registration Procedure First Edition
Information Technology - Coding of Multimedia and Hypermedia Information - Part 5: Support for Base-Level Interactive Applications
First Edition; Technical Corrigendum 1: 10-15-1999
Information Technology - Coding of Multimedia and Hypermedia Information - Part 6: Support for Enhanced Interactive Applications
First Edition
Information Technology - Coding of Multimedia and Hypermedia Information - Part 7: Interoperability and Conformance Testing for
ISO/IEC 13522-5 First Edition
ISO
ISO
13522-8
13528
ISO
13533
ISO
13534
ISO
13535
ISO
ISO
ISO
ISO
ISO
13536
13539
13542
13543
13545
Information Technology - Coding of Multimedia and Hypermedia Information - Part 8: XML Notation for ISO/IEC 13522-5 First Edition
Statistical methods for use in proficiency testing by interlaboratory comparisons First Edition
Petroleum and Natural Gas Industries - Drilling and Production Equipment - Drill-Through Equipment First Edition; Corrigendum 1:
1/15/2005
Petroleum and Natural Gas Industries - Drilling and Production Equipment - Inspection, Maintenance, Repair and Remanufacture of
Hoisting Equipment First Edition /Cobranded with API RP 8B
Petroleum and Natural Gas Industries - Drilling and Production Equipment - Hoisting Equipment First Edition/ Cobranded with API
SPEC 8C
Soil Quality - Determination of the Potential Cation Exchange Capacity and Exchangeable Cations Using Barium Chloride Solution
Buffered at pH = 8,1 First Edition
Earth-Moving Machinery - Trenchers - Definitions and Commercial Specifications First Edition
Paper and board Specification for internal diameters of cores for reels Second Edition
Copper, Lead and Zinc Sulfide Concentrates - Determination of Mass of Contained Metal in a Lot First Edition
Lead Sulfide Concentrates - Determination of Lead Content - EDTA Titration Method after Acid Digestion First Edition
ISO
13549
Information Technology - Data Interchange on 130 mm Optical Disk Cartridges - Capacity: 1,3 Gigabytes per Cartridge First Edition
ISO
13550
Hydrometric Determination - Flow Measurements in Open Channels Using Structures - Use of Vertical Underflow Gates First Edition
ISO
13552
ISO
13553
Textile Machinery and Accessories - Cloth Rollers - Specification for Connections for Automation of Roller Changing First Edition
Textile Machinery and Accessories - Weaver s Beams - Specification for Connections for Automation of Beam Changing First
Edition
ISO
13555-1
Diesel engines Procedure for checking the dynamic timing of diesel fuel injection equipment Part 1: Preconditioning First Edition
ISO
13555-2
ISO
ISO
13555-3
13556
ISO
ISO
13559
13562-1
ISO
ISO
13562-2
13563-1
Diesel engines Procedure for checking the dynamic timing of diesel fuel injection equipment Part 2: Test method First Edition
Diesel engines Procedure for checking the dynamic timing of diesel fuel injection equipment Part 3: Validation of timing
measurement devices First Edition
Road Vehicles - Localization of Exhaust System Leaks and Equipment Specifications First Edition
Butter, Fermented Milks and Fresh Cheese - Enumeration of Contaminating Microorganisms - Colony-Count Technique at 30
Degrees Celcius First Edition
Industrial Variable-Reach Trucks - Part 1: Stability Tests First Edition
Industrial Variable-Reach Trucks - Part 2: Additional Stability Tests for Trucks Handling Freight Containers of Length 6 m and Above
First Edition
Single Side Loading Fork-Lift Trucks - Part 1: Stability Tests First Edition
Single Side Loading Fork-Lift Trucks - Part 2: Additional Stability Tests for Trucks Handling Freight Containers of 6 m Length and
Above First Edition
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties - Part
1: Filtering and General Measurement Conditions First Edition; Technical Corrigendum 1-1998
ISO
13563-2
ISO
13565-1
ISO
13565-2
ISO
ISO
13565-3
13567-1
ISO
13567-2
ISO
ISO
ISO
13568 CORR 1
13568
13571
ISO
ISO
ISO
ISO
ISO
13575
13580
13583-1
13583-2
13584-1
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties - Part
2: Height Characterization Using the Linear Material Ratio Curve First Edition; Technical Corrigendum 1-1998
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties - Part
3: Height Characterization Using the Material Probability Curve First Edition
Technical Product Documentation and Naming of Layers for CAD - Part 1: Overview and Principles First Edition
Technical Product Documentation - Organization and Naming of Layers for CAD - Part 2: Concepts, Format and Codes Used in
Construction Documentation First Edition
Information technology ù Z formal specification notation ù Syntax, type system and semantics ù TECHNICAL CORRIGENDUM 1 First
Edition
Information Technology - Z Formal Specification Notation - Syntax, Type System and Semantics First Edition
Life-threatening components of fire ù Guidelines for the estimation of time available for escape using fire data First Edition
Information Technology - Telecommunications and Information Exchange between Systems - 50-Pole Interface Connector Mateability
Dimensions and Contact Number Assignments First Edition
Yogurt Determination of total solids content (Reference method) First edition
Centrifugally Cast Steel and Alloy Products - Part 1: General testing and Tolerance First Edition
Centrifugally cast steel and alloy products Part 2: Heat resistant materials First Edition
Industrial Automation Systems and Integration - Parts Library - Part 1: Overview and Fundamental Principles First Edition
ISO
13584-20
Industrial Automation Systems and Integration - Parts Library - Part 20: Logical Resource: Logical Model of Expressions First Edition
ISO
13584-24
ISO
13584-25
ISO
13584-26
ISO
13584-31
ISO
13584-42
ISO
13584-101
Industrial automation systems and integration Parts library Part 24: Logical resource: Logical model of supplier library First Edition
Industrial automation systems and integration Parts library Part 25: Logical resource: Logical model of supplier library with
aggregate values and explicit content First Edition
Industrial Automation Systems and Integration - Parts Library - Part 26: Logical Resource: Information Supplier Identification First
Edition
Industrial Automation Systems and Integration - Parts Library - Part 31: Implementation Resources: Geometric Programming
Interface First Edition
Industrial Automation Systems and Integration - Parts Library - Part 42: Description Methodology: Methodology for Structuring Part
Families First Edition; Technical Corrigendum 1: 01/15/2003
Industrial automation systems and integration Parts library Part 101: Geometrical view exchange protocol by parametric Program
First Edition
ISO
13584-102
ISO
13584-501
ISO
13584-511
ISO
13586
ISO
ISO
ISO
ISO
13589
13590
13591
13592
ISO
13595
Industrial automation systems and integration Parts library Part 102: View exchange protocol by ISO 10303 conforming specification
First Edition
Industrial automation systems and integration ù Parts library ù Part 501: Reference dictionary for measuring instruments ù
Registration procedure First Edition
Industrial automation systems and integration Parts library Part 511: Mechanical systems and components for general use
Reference dictionary for fasteners First Edition
Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach AMENDMENT 1:
Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres First Edition; Amendment
1:6/1/2003
Aerospace - Nuts, Bihexagonal, Self-Locking, with Counterbore and MJ Threads, Classifications: 1 100 MPa (at Ambient Temp)/425
Deg C, 1 100 MPa (at Ambient Temp)/650 Deg C, 1 210 MPa (at Ambient Temp)/425 Deg C, 1 210 MPa (at Ambient Temp)/730 Deg
C, 1 550 MPa (at Ambient Temp)/235 Deg C, 1 550 MPa (at Ambient Temp)/425 Deg C and 1 550 MPa (at Ambient Temp)/600 Deg
C - Dimensions First Edition
Small craft Personal watercraft Construction and system installation requirements Second Edition
Small Craft - Portable Fuel Systems for Outboard Motors First Edition
Small Craft - Backfire Flame Control for Petrol Engines First Edition
Aerospace - Inserts, with Self-Locking Floating Nut, with MJ Threads, in Metallic Material, Coated or Uncoated - Dimensions First
Edition
ISO
13596
Aerospace - Inserts, Self-Locking, with MJ Threads, Closed Type, in Metallic Material, Coated or Uncoated - Dimensions First Edition
ISO
13597
ISO
ISO
ISO
ISO
ISO
ISO
13598
13599
13600
13601
13602-1
13602-2
ISO
13614
ISO
13616-1
ISO
ISO
13616-2
13617
Aerospace - Inserts, Self-Locking, with MJ Threads, Open Type, in Metallic Material, Coated or Uncoated - Dimensions First Edition
Aerospace - Inserts, Self-Locking, with MJ Threads, Reduced Flanges, Closed Type, in Metallic Material, Coated or Uncoated Dimensions First Edition
Aerospace - Inserts, with Clearance Hole, in Metallic Material, Coated or Uncoated - Dimensions First Edition
Technical Energy Systems - Basic Concepts First Edition; Technical Corrigendum 1-1998
Technical Energy Systems - Structure for Analysis - Energyware Supply and Demand Sectors First Edition
Technical Energy System - Methods for Analysis - Part 1: General First Edition
Technical energy systems - Methods for analysis - Part 2: Weighting and aggregation of energywares First Edition
Information Technology - Interchange on 300 mm Optical Disk Cartridges of the Write Once, Read Multiple (WORM) Type Using the
SSF Method First Edition
Financial services ù International bank account number (IBAN) ù Part 1: Structure of the IBAN First Edition [Superseded: ISO 13616,
ISO 13616]
Financial services ù International bank account number (IBAN) ù Part 2: Role and responsibilities of the Registration Authority First
Edition [Superseded: ISO 13616, ISO 13616]
Ships and Marine Technology - Shipboard Incinerators - Requirements Second Edition
ISO
13623
ISO
ISO
13625
13626
ISO
13628-1
ISO
13628-2
ISO
13628-3
ISO
13628-4
ISO
13628-5
ISO
13628-6
ISO
13628-7
ISO
13628-8 CORR 1
ISO
13628-8
ISO
13628-9
ISO
13628-10
ISO
ISO
ISO
ISO
ISO
13628-11
13631
13638
13640
13641-1
ISO
ISO
13641-2
13642
Petroleum and Natural Gas Industries - Pipeline Transportation Systems First Edition
Petroleum and natural gas industries Drilling and production equipment Marine drilling riser couplings First Edition; Corrected
Version: 06/15/2003
Petroleum and natural gas industries Drilling and production equipment Drilling and well-servicing structures First Edition
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and
recommendations Second Edition
Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems
for subsea and marine applications Second Edition
Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems Part 3: Through Flowline (TFL)
Systems First Edition/ Cobranded with API RP 17C
Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 4: Subsea Wellhead and Tree
Equipment First Edition
Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 5: Subsea Umbilicals First
Edition/ Cobranded with API SPEC 17E
Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control
systems Second Edition; Cobranded with API SPEC 17F
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser
systems First Edition
Petroleum and natural gas industries ù Design and operation of subsea production systems ù Part 8: Remotely Operated Vehicle
(ROV) interfaces on subsea production systems TECHNICAL CORRIGENDUM 1 First Edition
Petroleum and natural gas industries ù Design and operation of subsea production systems ù Part 8: Remotely Operated Vehicle
(ROV) interfaces on subsea production systems First Edition
Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 9: Remotely Operated Tool
(ROT) Intervention Systems First Edition
Petroleum and natural gas industries Design and operation of subsea production systems Part 10: Specification for bonded flexible
pipe First Edition
Petroleum and natural gas industries ù Design and operation of subsea production systems ù Part 11: Flexible pipe systems for
subsea and marine applications First Edition [Superseded: ISO 10420]
Petroleum and Natural Gas Industries - Packaged Reciprocating Gas Compressors First Edition
Building Construction - Sealants - Determination of Resistance to Prolonged Exposure to Water First Edition
Building Construction - Jointing Products - Specifications for Test Substrates First Edition
Water Quality - Determination of Inhibition of Gas Production of Anaerobic Bacteria - Part 1: General Test First Edition
Water Quality - Determination of Inhibition of Gas Production of Anaerobic Bacteria - Part 2: Test for Low Biomass Concentration
First Edition
Information Technology - Elements of Management Information Related to the OSI Physical Layer Second Edition
ISO
ISO
13653
13655
ISO
13656
ISO
13658
ISO
13660
ISO
13663
ISO
13664
ISO
ISO
13665
13666
ISO
ISO
ISO
13673
13674-1
13674-2
ISO
ISO
13678
DIS 13678
ISO
13679
ISO
ISO
13680
13681
ISO
ISO
ISO
ISO
ISO
13685
13686
13688
13690
13691
Optics and Optical Instruments - General Optical Test Methods - Measurement of Relative Irradiance in the Image Field First Edition
Graphic Technology - Spectral Measurement and Colorimetric Computation for Graphic Arts Images First Edition
Graphic Technology - Application of Reflection Densitometry and Colorimetry to Process Control or Evaluation of Prints and Proofs
First Edition
Zinc Sulfide Concentrates - Determination of Zinc Content - Hydroxide Precipitation and EDTA Titrimetric Method First Edition
Information Technology - Office Equipment - Measurement of Image Quality Attributes for Hardcopy Output - Binary Monochrome
Text and Graphic Images First Edition
Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of the Area Adjacent to the Weld Seam for the Detection of Laminar
Imperfections First Edition
Seamless and Welded Steel Tubes for Pressure Purposes - Magnetic Particle Inspection of the Tube Ends for the Detection of
Laminar Imperfections First Edition
Seamless and Welded Steel Tubes for Pressure Purposes - Magnetic Particle Inspection of the Tube Body for the Detection of
Surface Imperfections First Edition
Ophthalmic Optics - Spectacle Lenses - Vocabulary Optique Ophtalmique - Verres De Lunettes - Vocabularie First Edition
Information Technology - Document Processing and Related Communication - Conformance Testing for Standard Generalized
Markup Language (SGML) Systems First Edition
Road Vehicles - Test Method for the Quantification of On-Centre Handling - Part 1: Weave Test First Edition
Road vehicles Test method for the quantification of on-centre handling Part 2: Transition test First Edition
Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe
Cobranded with API RP 5A3; Technical Corrigendum 1: 10/15/2005
Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe
Petroleum and natural gas industries - Procedures for testing casing and tubing connections First Edition/ Cobranded with API RP
5C5
Petroleum and Natural Gas Industries - Corrosion-Resistant Alloy Seamless Tubes for Use as Casing, Tubing and Coupling Stock Technical Delivery Conditions First Edition; Technical Corrigendum 2:5/1/2004; (Technical Corrigendum 1 in French Only)
Meat and Meat Products - Enumeration of Yeasts and Moulds - Colony- Count Technique First Edition
Ginger and Its Oleoresins - Determination of the Main Pungent Components (Gingerols and Shogaols) - Method Using HighPerformance Liquid Chromatography First Edition
Natural Gas - Quality Designation First Edition
Protective Clothing - General Requirements First Edition
Cereals, Pulses and Milled Products - Sampling of Static Batches First Edition [Superseded: ISO 951, ISO 950, ISO 2170]
Petroleum and Natural Gas Industries - High-Speed Special-Purpose Gear Units First Edition
Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Methods for Laser Beam Power (Energy) Density
Distribution First Edition; Technical Corrigendum 1: 11/01/2005
ISO
13694
ISO
ISO
13695
13696
ISO
13697
ISO
13702
ISO
13703
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
13704
FDIS 13704
13705
13706
13707
13709
DIS 13709
13710
ISO
13712-1
ISO
13712-2
ISO
13712-3
ISO
ISO
ISO
ISO
13714
13715
13716
13719-1
Optics and photonics Lasers and laser-related equipment Test methods for the spectral characteristics of lasers First Edition
Optics and Optical Instruments - Test Methods for Radiation Scattered by Optical Components First Edition
Optics and photonics Lasers and laser-related equipment Test methods for specular reflectance and regular transmittance of optical
laser components First Edition
Petroleum and Natural Gas Industries - Control and Mitigation of Fires and Explosions on Offshore Production Installations Requirements and Guidelines First Edition
Petroleum and Natural Gas Industries - Design and Installation of Piping Systems on Offshore Production Platforms First Edition;
Technical Corrigendum 1: 07/01/2002
Petroleum and Natural Gas Industries - Calculation of Heater-Tube Thickness in Petroleum Refineries First Edition; Cobranded with
API STD 530; Corrigendum 1: 01-15-2004
Petroleum, petrochemical and natural gas industries - Calculation of heater-tube thickness in petroleum refineries
Petroleum, petrochemical and natural gas industries Fired heaters for general refinery service Second Edition
Petroleum, petrochemical and natural gas industries Air-cooled heat exchangers Second Edition
Petroleum and Natural Gas Industries - Reciprocating Compressors First Edition
Centrifugal pumps for petroleum, petrochemical and natural gas industries First Edition
Centrifugal pumps for petroleum, petrochemical and natural gas industries
Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps First Edition
Information Technology - Remote Operations: Concepts, Model and Notation First Edition; (Corrigendum 1-1996) (Amendment 11996)
Information Technology - Remote Operations: OSI Realizations - Remote Operations Service Element (ROSE) Service Definition
First Edition; (Corrected and Reprinted - 1995) (Amendment 1-1996)
Information Technology - Remote Operations: OSI Realizations - Remote Operations Service Element (ROSE) Protocol Specification
First Edition; (Corrected and Reprinted - 1995) (Amendment 1-1996)
Information Technology - Document Processing and Related Communication - User Interface to Telephone-Based Services - Voice
Messaging Applications First Edition
Technical Drawings - Edges of Undefined Shape - Vocabulary and Indications Second Edition
Dentistry - Reversible-Irreversible Hydrocolloid Impression Material Systems First Edition
Information Technology - Portable Common Tool Environment (PCTE) - Part 1: Abstract Specification Second Edition
ISO
13719-2
Information Technology - Portable Common Tool Environment (PCTE) - Part 2: C Programming Language Binding Second Edition
ISO
13719-3
Information Technology - Portable Common Tool Environment (PCTE) - Part 3: Ada Programming Language Binding Second Edition
ISO
ISO
ISO
13719-4
13720
13722
ISO
ISO
13726
13730
ISO
13731
ISO
13732-3
ISO
ISO
ISO
13734
13736
13737
ISO
13738
ISO
13740
ISO
13741-1
ISO
ISO
ISO
13741-2
13746
13750
ISO
13751
ISO
13752
ISO
ISO
13753
13754
ISO
13756
Information Technology - Portable Common Tool Environment (PCTE) - Part 4: IDL Binding (Interface Definition Language) First
Edition
Meat and Meat Products - Enumeration of Pseudomonas Spp. First Edition
Meat and Meat Products - Enumeration of Brochothrix thermosphacta - Colony-Count Technique First Edition
Hydraulic Fluid Power - Single Rod Cylinders, 16 MPa (160 Bar) Compact Series with Bores from 250 mm to 500 mm - Accessory
Mounting Dimensions First Edition
Meat and Meat Products - Determination of Total Phosphorus Content - Spectrometric Method First Edition
Ergonomics of the Thermal Environment - Vocabulary and Symbols Ergonomie des Ambiances Thermiques - Vocabulaire et
Symboles First Edition
Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold
surfaces First Edition
Natural Gas - Organic Sulfur Compounds Used as Odorants - Requirements and Test Methods First Edition; Technical Corrigendum
1 07/01/1999
Petroleum Products and Other Liquids - Determination of Flash Point - Abel Closed Cup Method First Edition
Petroleum products and lubricants Determination of low-temperature cone penetration of lubricating greases First Edition
Lubricants, Industrial Oils and Related Products (Class L) - Family E (Internal Combustion Engine Oils) - Specifications for TwoStroke-Cycle Gasoline Engine Oils (Categories EGB, EGC and EGD) First Edition
Crude Petroleum and Petroleum Products - Transfer Accountability - Assessment of Vessel Experience Factor on Loading (VEFL)
and Vessel Experience Factor on Discharging (VEFD) of Ocean-Going Tanker Vessels First Edition
Plastics/Rubber - Polymer Dispersions and Rubber Latices (Natural and Synthetic) - Determination of Residual Monomers and Other
Organic Components by Capillary-Column Gas Chromatography - Part 1: Direct Liquid Injection Method First Edition
Plastics/Rubber - Polymer Dispersions and Rubber Latices (Natural and Synthetic) - Determination of Residual Monomers and Other
Organic Components by Capillary-Column Gas Chromatography - Part 2: Headspace Method First Edition
Textile Floor Coverings - Guidelines for Installation and Use on Stairs First Edition
Textile Floor Coverings - Determination of Resistance to Staining by Acid Food Colours First Edition
Information Technology - Programming Languages, Their Environments and System Software Interfaces - Programming Language
Extended APL First Edition
Air Quality - Assessment of Uncertainty of a Measurement Method under Field Conditions Using a Second Method as Reference First
Edition
Mechanical Vibration and Shock - Hand-Arm Vibration - Method for Measuring the Vibration Transmissibility of Resilient Materials
When Loaded by the Hand-Arm System First Edition
Textile Machinery and Accessories - Hexagon Nuts and Slotted Nuts for Spinning and Twisting Spindles First Edition
Determination of Silver in Silver Jewellery Alloys - Volumetric (Potentiometric) Method Using Sodium Chloride or Potassium Chloride
First Edition
ISO
ISO
ISO
13757
13758
13759
ISO
13760
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
13761
13764
13765-1
13765-2
13765-3
13765-4
13765-5
13765-6
13766
13769 AMD 1
13769
13770
13772
13773
13774
13775-1
13775-2
ISO
ISO
ISO
ISO
ISO
ISO
13778
13779-1
13779-2
13779-4
13781
13782
ISO
ISO
ISO
ISO
13783
13784-1
13784-2
13785-1
Liquefied Petroleum Gases - Determination of Oily Residues - High- Temperature Method First Edition (CEN EN ISO 13757: 1996)
Liquefied Petroleum Gases - Assessment of the Dryness of Propane - Valve Freeze Method First Edition
Petroleum Products - Determination of Alkyl Nitrate in Diesel Fuels - Spectrometric Method First Edition
Plastics Pipes for the Conveyance of Fluids under Pressure - Miner s Rule - Calculation Method for Cumulative Damage First
Edition
Plastics Pipes and Fittings - Pressure Reduction Factors for Polyethylene Pipeline Systems for Use at Temperatures Above 20
Degrees C First Edition
Space Data and Information Transfer Systems - Standard Formatted Data Units - Control Authority Procedures First Edition
Refractory mortars Part 1: Determination of consistency using the penetrating cone method First Edition
Refractory mortars Part 2: Determination of consistency using the reciprocating flow table method First Edition
Refractory mortars Part 3: Determination of joint stability First Edition
Refractory mortars Part 4: Determination of flexural bonding strength First Edition
Refractory mortars Part 5: Determination of grain size distribution (sieve analysis) First Edition
Refractory mortars Part 6: Determination of moisture content of ready-mixed mortars First Edition
Earth-moving machinery Electromagnetic compatibility Second Edition
Gas cylinders ù Stamp marking First Edition
Gas cylinders ù Stamp marking First Edition
Aluminium Alloy Gas Cylinders - Operational Requirements for Avoidance of Neck and Shoulder Cracks First Edition
Forestry Machinery - Portable Chain-Saws - Non-Manually Actuated Chain Brake Performance Second Edition
Rubber - Polychloroprene Latex - Determination of Alkalinity First Edition
Rubber and Plastics Hoses for Fuels for Internal-Combustion Engines - Method of Test for Flammability First Edition
Thermoplastic Tubing and Hoses for Automotive Use - Part 1: Non-Fuel Applications First Edition
Thermoplastic Tubing and Hoses for Automotive Use - Part 2: Petroleum-Based-Fuel Applications First Edition
Plain Bearings - Quality Assurance of Thin-Walled Half Bearings - Selective Assembly of Bearings to Achieve a Narrow Clearance
Range First Edition
Implants for Surgery - Hydroxyapatite - Part 1: Ceramic Hydroxyapatite First Edition
Implants for Surgery - Hydroxyapatite - Part 2: Coatings of Hydroxyapatite First Edition
Implants for Surgery - Hydroxyapatite - Part 4: Determination of Coating Adhesion Strength First Edition
Poly(L-lactide) Resins and Fabricated Forms for Surgical Implants - In Vitro Degradation Testing First Edition
Implants for Surgery - Metallic Materials - Unalloyed Tantalum for Surgical Implant Applications First Edition
Plastics Piping Systems - Unplasticized Poly(Vinyl Chloride) (PVC-U) End-Load-Bearing Double-Socket Joints - Test Method for
Leaktightness and Strength While Subjected to Bending and Internal Pressure First Edition
Reaction-to-fire tests for sandwich panel building systems Part 1: Test method for small rooms First Edition
Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms First Edition
Reaction-to-fire tests for facades Part 1: Intermediate-scale test First Edition
ISO
ISO
13785-2
13786
ISO
13787
ISO
ISO
ISO
13788
13789
13790
ISO
13791
ISO
ISO
ISO
13792
13793
13794
ISO
13800
ISO
ISO
ISO
13802
13803
13804
ISO
ISO
13805
13806
ISO
13807
ISO
13813
ISO
13816
ISO
FDIS 13816
ISO
13817-1
ISO
13818-1 CORR 4
Reaction-to-fire tests for facades Part 2: Large-scale test First Edition
Thermal Performance of Building Components - Dynamic Thermal Characteristics - Calculation Methods First Edition
Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity First
Edition
Hygrothermal Performance of Building Comopnents and Building Elements - Internal Surface Temperature to Avoid Critical Surface
Humidity and Interstitial Condensation - Calculation Methods First Edition
Thermal Performance of Buildings - Transmission Heat Loss Coefficient - Calculation Method First Edition
Thermal performance of buildings Calculation of energy use for space heating First Edition
Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling General
criteria and validation procedures First Edition
Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling Simplified
methods First edition
Thermal Performance of Buildings - Thermal Design of Foundations to Avoid Frost heave First Edition
Ambient Air - Determination of Asbestos Fibres - Indirect-Transfer Transmission Electron Microscopy Method First Edition
Information Technology - Procedure for the Registration of Identifiers and Attributes for Volume and File Structure First Edition
Plastics - Verification of Pendulum Impact-Testing Machines - Charpy, Izod and Tensile Impact-Testing First Edition; Technical
Corrigendum 1 04/15/2000
Paints and Varnishes - Determination of Reflection Haze on Paint Films at 20 First Edition
Vitreous and Porcelain Enamels for Aluminium - Production of Specimens for Testing First Edition
Virtreous and Porcelain Enamels for Aluminium - Determination of the Adhesion of Enamels on Aluminium under the Action of
Electrolytic Solution (Spall Test) First Edition
Vitreous and Porcelain Enamels - Corrosion Tests in Closed Systems First Edition
Vitreous and Porcelain Enamels - Determination of Crack Formation Temperature in the Thermal Shock Testing of Enamels for the
Chemical Industry First Edition; Technical Corrigendum 1: 10/15/2000
Information Technology - Programming Languages - Generic Packages of Real and Complex Type Declarations and Basic
Operations for Ada (Including Vector and Matrix Types) First Edition
Information Technology - Programming Languages, Their Environments and System Software Interfaces - Programming Language
ISLISP First Edition
Information technology ù Programming languages, their environments and system software interfaces ù Programming language
ISLISP First Edition
Information Technology - Programming Languages, Their Environments and System Software Interfaces - Vienna Development
Method - Specification Language - Part 1: Base Language First Edition
Information technology - Generic coding of moving pictures and associated audio information: Systems TECHNICAL
CORRIGENDUM 4 Second Edition
ISO
13818-1 AMD 5
ISO
13818-1 AMD 4
ISO
13818-1 CORR 3
ISO
13818-1 AMD 3
ISO
ISO
ISO
ISO
ISO
ISO
13818-1 AMD 2
13818-1 AMD 1
13818-1 CORR 2
13818-1 CORR 1
13818-1
13818-1 FDAM 2
ISO
13818-1 FDAM 1
ISO
13818-2 CORR 2
ISO
13818-2 CORR 1
ISO
ISO
13818-2 AMD 1
13818-2
ISO
ISO
13818-2 FDAM 2
13818-3
ISO
13818-4 CORR 1
Information technology - Generic coding of moving pictures and associated audio information: Systems AMENDMENT 4: ISAN and VISAN use in the content labelling descriptor Second Edition; Corrigendum 1: 03/01/2002; Corrigendum 2: 12/01/2002; Amendment 1:
08/01/2003; Amendment 2: 02/15/2004; Amendment 3: 11/01/2004; Corrigendum 3: 06/15/2005; Amendment 4: 07/01/2005;
Amendment 5: 12/15/2005
Information technology - Generic coding of moving pictures and associated audio information: Systems AMENDMENT 4: ISAN and VISAN use in the content labelling descriptor Second Edition; Technical Corrigendum 1: 03/01/2002; Technical Corrigendum 2:
12/01/2002; Amendment 1: 08/01/2003; Amendment 2: 02/15/2004; Amendment 3: 11/01/2004; Technical Corrigendum 3:
06/15/2005; Amendment 4: 07/01/2005
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition;
Corrigendum 1: 3/01/2002; Corrigendum 2: 12/01/2002; Amendment 1: 8/1/2003; Amendment 2: 02/15/2004; Amendment 3:
11/01/2004; Corrigendum 3: 06/15/2005
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition;
Corrigendum 1: 3/01/2002; Corrigendum 2: 12/01/2002; Amendment 1: 8/1/2003; Amendment 2: 02/15/2004; Amendment 3:
11/01/2004
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition;
Corrigendum 1: 3/01/2002; Corrigendum 2: 12/01/2002; Amendment 1: 8/1/2003; Amendment 2: 02/15/2004
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition
Title not available
Information technology Generic coding of moving pictures and associated audio information: Systems AMENDMENT 1: Transport of
MPEG-4 streaming text and MPEG-4 lossless audio over MPEG-2 systems
Information technology ù Generic coding of moving pictures and associated audio information: Video TECHNICAL CORRIGENDUM
2 Second Edition
Information technology ù Generic coding of moving pictures and associated audio information: Video TECHNICAL CORRIGENDUM
1 Second Edition
Information technology ù Generic coding of moving pictures and associated audio information: Video AMENDMENT 1: Content
description data Second Edition
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Video Second Edition
Information technology - Generic coding of moving pictures and associated audio information: Video AMENDMENT 2: Support for
Colour Spaces
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information - Part 3: Audio First Edition
Information technology ù Generic coding of moving pictures and associated audio information ù Part 4: Conformance testing
TECHNICAL CORRIGENDUM 1 Second Edition
ISO
13818-4 CORR 1
TO AMD 2
ISO
13818-4 AMD 2
ISO
13818-4 AMD 1
ISO
13818-4
ISO
13818-6
ISO
13818-7
ISO
13818-7 FDAM 1
ISO
13818-9
ISO
13818-10
ISO
ISO
ISO
ISO
ISO
ISO
13818-11
13819-2
13820
13821
13822
13829
ISO
13842
ISO
13844
ISO
13845
ISO
13846
ISO
13847
Information technology ù Generic coding of moving pictures and associated audio information ù Part 4: Conformance testing
AMENDMENT 2: Additional audio conformance test sequences TECHNICAL CORRIGENDUM 1 Second Edition
Information technology ù Generic coding of moving pictures and associated audio information ù Part 4: Conformance testing
AMENDMENT 2: Additional audio conformance test sequences Second Edition
Information technology ù Generic coding of moving pictures and associated audio information ù Part 4: Conformance testing
AMENDMENT 1: MPEG-2 IPMP conformance testing Second Edition
Information technology Generic coding of moving pictures and associated audio information Part 4: Conformance testing Second
Edition
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information - Part 6: Extensions for DSM-CC First
Edition; Technical Corrigendum 1: 11-01-1999; Amendment 2: 06-01-2000; Amendment 1: 10-15-2000; Amendment 3: 08-15-2001;
Technical Corrigendum 2: 8/15/2002; Technical Corrigendum 1 to Amendment 1: 10/01/02
Information technology Generic coding of moving pictures and associated audio information Part 7: Advanced Audio Coding (AAC)
Fourth Edition
Information technology ù Generic coding of moving pictures and associated audio information ù Part 7: Advanced Audio Coding
(AAC) AMENDMENT 1: Transport of MPEG Surround in AAC Fourth Edition
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information - Part 9: Extension for Real Time
Interface for Systems Decoders First Edition
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information - Part 10: Conformance Extensions
for Digital Storage Media Command and Control (DSM-CC) First Edition
Information technology Generic coding of moving pictures and associated audio information Part 11: IPMP on MPEG-2 systems
First Edition
Petroleum and Natural Gas Industries - Offshore Structures - Part 2: Fixed Steel Structures First Edition
Paper, Board and Corrugated Fibreboard - Description and Calibration of Compression-Testing Equipment First Edition
Corrugated Fibreboard - Determination of Edgewise Crush Resistance - Waxed Edge Method First Edition
Bases for Design of Structures - Assessment of Existing Structures First Edition
Water Quality - Determination of the Genotoxicity of Water and Waste Water Using the Umu-Test First Edition
Information Technology - 130 mm Optical Disk Cartridges for Information Interchange - Capacity: 2 Gbytes Per Cartridge First Edition
Plastics Piping Systems - Elastomeric-Sealing-Ring-Type Socket Joints of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Use with
PVC-U Pipes - Test Method for Leaktightness under Negative Pressure First Edition
Plastics Piping Systems - Elastomeric-Sealing-Ring-Type Socket Joints for Use with Unplasticized Poly(Vinyl Chloride) (PVC-U)
Pipes - Test Method for Leaktightness under Internal Pressure and with Angular Deflection First Edition
Plastic Piping Systems - End-Load-Bearing and Non-End-Load-Bearing Assemblies and Joints for Thermoplastics Pressure Piping Test Method for Long-Term Leaktightness Under internal Water Pressure First Edition
Petroleum and Natural Gas Industries - Pipeline Transportation Systems - Welding of Pipelines First Edition; Corrigendum
1:12/15/2001
ISO
ISO
ISO
ISO
ISO
ISO
ISO
13849-1
13849-2
13850
13851
13852
13853
13854
ISO
13855
ISO
13856-1
ISO
13856-2
ISO
ISO
ISO
ISO
13856-3
13860
13861
13862
ISO
13863
ISO
13864
ISO
13865
ISO
13866
ISO
13868
ISO
13869
ISO
13870
ISO
13871
Safety of machinery Safety-related parts of control systems Part 1: General principles for design Second Edition
Safety of machinery Safety-related parts of control systems Part 2: Validation First edition
Safety of Machinery - Emergency Stop - Principles for Design Second Edition
Safety of Machinery - Two-Hand Control Devices - Functional Aspects and Design Principles First Edition
Safety of Machinery - Safety Distances to Prevent Danger Zones Being Reached by the Upper Limbs First Edition
Safety of Machinery - Safety Distances to Prevent Danger Zones Being Reached by the Lower Limbs First Edition
Safety of Machinery - Minimum Gaps to Avoid Crushing of Parts of the Human Body First Edition
Safety of Machinery - Positioning of Protective Equipment with Respect to the Approach Speeds of Parts of the Human Body First
Edition
Safety of Machinery - Pressure-Sensitive Protective Devices - Part 1: General Principles for Design and Testing of PressureSensitive Mats and Pressure-Sensitive Floors First Edition
Safety of machinery Pressuresensitive protective devices Part 2: General principles for the design and testing of pressure-sensitive
edges and pressure-sensitive bars First Edition
Safety of machinery Pressuresensitive protective devices Part 3: General principles for the design and testing of pressure-sensitive
bumpers, plates, wires and similar devices First Edition
Machinery for Forestry - Forwarders - Terms, Definitions and Commercial Specifications First Edition
Machinery for Forestry - Wheeled Skidders - Terms, Definitions and Commercial Specifications First Edition
Machinery for Forestry - Feller-Bunchers - Terms, Definitions and Commercial Specifications First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Path Replacement Additional Network Feature Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Name Identification Supplementary Services First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Transfer Supplementary Services Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Completion Supplementary Services First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Name Identification Supplementary Services Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Transfer Supplementary Service Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Completion Supplementary Services Third Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Telecommunications Networks Digital Channel Aggregation First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Diversion Supplementary Services Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Diversion Supplementary Services Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Path Replacement Additional Network Feature Third Edition
Liquid milk Determination of acidsoluble B-lactoglobulin content Reverse-phase HPLC method First Edition
Soil Quality - Determination of Polynuclear Aromatic Hydrocarbons - Method Using High-Performance Liquid Chromatography First
Edition
Soil Quality - Determination of Total Nitrogen Content by Dry Combustion (Elemental Analysis") First Edition"
Petroleum and Natural Gas Industries - Content and Drafting of a Functional Specification First Edition
Petroleum and Natural Gas Industries - Content and Drafting of a Technical Specification First Edition
Animal and vegetable fats and oils Determination of isolated trans isomers by infrared spectrometry First Edition
ISO
13872
ISO
13873
ISO
ISO
13874
13875
ISO
ISO
ISO
ISO
ISO
13877
13878
13879
13880
13884
ISO
ISO
ISO
ISO
13885-1
13886
13887
13888-1
Binders for Paints and Varnishes - Gel Permeation Chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as Eluent First Edition
Information Technology - Language-Independent Procedure Calling (LIPC) First Edition
Cold-reduced steel sheet of higher yield strength with improved formability Second Edition
IT security techniques Non-repudiation Part 1: General Second Edition
ISO
13888-2
Information Technology - Security Techniques - Non-Repudiation - Part 2: Mechanisms Using Symmetric Techniques First Edition
ISO
ISO
13888-3
13894-1
ISO
ISO
ISO
13894-2
13897 CORR 1
13897
ISO
13898-1
ISO
13898-2
ISO
13898-3
ISO
13898-4
Information Technology - Security Techniques - Non-Repudiation - Part 3: Mechanisms Using Asymmetric Techniques First Edition
High-Pressure Decorative Laminates - Composite Elements - Part 1: Test Methods First Edition
High-pressure decorative laminates Composite elements Part 2: Specifications for composite elements with wood-based substrates
for interior use First Edition
Dentistry ù Amalgam capsules TECHNICAL CORRIGENDUM 1 First Edition
Dentistry - Amalgam Capsules First Edition
Steel and Iron - Determination of Nickel, Copper and Cobalt Contents - Inductively Coupled Plasma Atomic Emission Spectrometric
Method - Part 1: General Requirements and Sample Dissolution First Edition
Steel and Iron - Determination of Nickel, Copper and Cobalt Contents - Inductively Coupled Plasma Atomic Emission Spectrometric
Method - Part 2: Determination of Nickel Content First Edition
Steel and Iron - Determination of Nickel, Copper and Cobalt Contents - Inductively Coupled Plasma Atomic Emission Spectrometric
Method - Part 3: Determination of Copper Content First Edition
Steel and Iron - Determination of Nickel, Copper or Cobalt Contents - Inductively Coupled Plasma Atomic Emission Spectrometric
Method - Part 4: Determination of Cobalt Content First Edition
ISO
ISO
13899-2
13900
ISO
ISO
ISO
13902
13903
13904
ISO
13909-1
ISO
13909-2
ISO
13909-3
ISO
13909-4
ISO
13909-5
ISO
13909-6
ISO
13909-7
ISO
ISO
ISO
13909-8
13910
13912
ISO
ISO
13916
13918
ISO
13919-1
ISO
13919-2
ISO
13920
Steel Determination of Mo, Nb and W contents in alloyed steel Inductively coupled plasma atomic emission spectrometric method
Part 2: Determination of Nb content First Edition
Steel - Determination of Boron Content - Curcumin Spectrophotometric Method After Distillation First Edition
Steel and Iron - Determination of High Sulfur Content - Infrared Absorption Method After Combustion in an Induction Furnace First
Edition
Animal feeding stuffs Determination of amino acids content First edition
Animal feeding stuffs Determination of tryptophan content First edition
Hard Coal and Coke - Mechanical Sampling - Part 1: General Introduction First Edition; Cancels and Replaces ISO 9411-1:1994 and
ISO 9411-2:1993
Hard Coal and Coke - Mechanical Sampling - Part 2: Coal - Sampling from Moving Streams First Edition; Cancels and Replaces ISO
9411-1:1994 and ISO 9411-2:1993
Hard Coal and Coke - Mechanical Sampling - Part 3: Coal - Sampling from Stationary Lots First Edition; Cancels and Replaces ISO
9411-1:1994 and ISO 9411-2:1993
Hard Coal and Coke - Mechanical Sampling - Part 4: Coal - Preparation of Test Samples First Edition; Cancels and Replaces ISO
9411-1:1994 and ISO 9411-2:1993
Hard Coal and Coke - Mechanical Sampling - Part 5: Coke - Sampling from Moving Streams First Edition; Cancels and Replaces ISO
9411-1:1994 and ISO 9411-2:1993
Hard Coal and Coke - Mechanical Sampling - Part 6: Coke - Preparation of Test Samples First Edition; Cancels and Replaces ISO
9411-1:1994 and ISO 9411-2:1993
Hard Coal and Coke - Mechanical Sampling - Part 7: Methods for Determining the Precision of Sampling, Sample Preparation and
Testing First Edition; Cancels and Replaces ISO 9411-1:1994 and ISO 9411-2:1993
Hard Coal and Coke - Mechanical Sampling - Part 8 Methods of Testing for Bias First Edition; Cancels and Replaces ISO 94111:1994 and ISO 9411-2:1993
Structural timber Characteristic values of strength-graded timber Sampling, full-size testing and evaluation First Edition
Structural timber - Machine strength grading - Basic principles First Edition
Welding - Guidance on the Measurement of Preheating Temperature, Interpass Temperature and Preheat Maintenance Temperature
First Edition CEN EN ISO 13 916: 1996
Welding - Studs and Ceramic Ferrules for Arc Stud Welding First Edition
Welding - Electron and Laser-Beam Welded Joints - Guidance on Quality Levels for Imperfections - Part 1: Steel First Edition CEN
EN ISO 13 919-1: 1996
Welding - Electron and Laser Beam Welded Joints - Guidance on Quality Levels for Imperfections - Part 2: Aluminium and its
Weldable Alloys First Edition
Welding - General Tolerances for Welded Constructions - Dimensions for Lengths and Angles - Shape and Position First Edition
CEN EN ISO 13 920: 1996
ISO
13921
ISO
13923
ISO
ISO
ISO
ISO
ISO
ISO
13924
13926-1
13926-2
13927
13929
13930
ISO
ISO
13934-1
13934-2
ISO
13935-1
ISO
13935-2
ISO
13936-1
Aerospace - Screws, 100 Degrees Reduced Countersunk Head, Internal Offset Cruciform Ribbed or Unribbed Drive, Normal Shank,
Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa Dimensions First Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DDS-2
Format Using 120 m Length Tape First Edition
Plastics Pipes and Fittings - Bending-Tensile Cycle Test for PE/Metal Transition Fittings, PE Tapping Tees and PE Branch Saddles
First Edition
Pen Systems - Part 1: Glass Cylinders for Pen-Injectors for Medical Use Third Edition
Pen Systems - Part 2: Plungers and Discs for Pen-Injectors for Medical Use First Edition
Plastics - Simple Heat Release Test Using a Conical Radiant Heater and a Thermopile Detector First Edition
Small Craft - Steering Gear - Geared Link Systems First Edition
Iron Ores - Dynamic Test for Low-Temperature Reduction-Disintegration First Edition
Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip
Method First Edition
Textiles - Tensile Properties of Fabrics - Part 2: Determination of Maximum Force and Using the Grab Method First Edition
Textiles - Seam Tensile Properties of Fabrics and Made-Up Textile Articles - Part 1: Determination of Maximum Force to Seam
Rupture Using the Strip Method First Edition
Textiles - Seam Tensile Properties of Fabrics and Made-Up Textile Articles - Part 2: Determination of Maximum Force to Seam
Rupture Using the Grab Method First Edition
Textiles Determination of the slippage resistance of yarns at a seam in woven fabrics Part 1: Fixed seam opening method First
Edition
ISO
13936-2
Textiles Determination of the slippage resistance of yarns at a seam in woven fabrics Part 2: Fixed load method First Edition
ISO
13936-3
ISO
13937-1
Textiles Determination of the slippage resistance of yarns at a seam in woven fabrics Part 3: Needle clamp method First edition
Textiles - Tear Properties of Fabrics - Part 1: Determination of Tear Force of Trouser-Shaped Test Specimens (Single Tear Method)
First Edition; Corrigendum 1: 10/1/2004
ISO
13937-2
ISO
13937-3
ISO
13937-4
ISO
13938-1
Textiles - Tear Properties of Fabrics - Part 2: Determination of Tear Force Using Ballistic Pendulum Method (Elmendorf) First Edition
Textiles - Tear Properties of Fabrics - Part 3: Determination of Tear Force of Wing-Shaped Test Specimens (Single Tear Method)
First Edition
Textiles - Tear Properties of Fabrics - Part 4: Determination of Tear Force of Tongue-Shaped Test Specimens (Double Tear Test) )
First Edition
Textiles - Bursting Properties of Fabrics - Part 1: Hydraulic Method for Determination of Bursting Strength and Bursting Distension
First Edition; Replaces ISO 2960: 1974
Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting Distension
First Edition
Bonded Abrasive Products - Limit Deviations and Run-Out Tolerances First Edition
Fire Safety - Vocabulary Securite Au Feu - Vocabulaire First Edition; Replaces ISO/IEC Guide 52
Lubricated Metal-Powder Mixes - Determination of Lubricant Content - Modified Soxhlet Extraction Method First Edition; Supersedes
ISO 4495: 1978
Metallic powders ù Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
First edition
ISO
ISO
ISO
13938-2
13942
13943
ISO
13944
ISO
13947
ISO
13948-1
ISO
ISO
13948-2
13950
ISO
13951
ISO
13953
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
13954
13955
13957
13958
13959
13960
13961
13962
Diesel Engines - Fuel Injection Pumps and Fuel Injector Low-Pressure Connections - Part 1: Threaded Connections First Edition
Diesel Engines - Fuel Injection Pumps and Fuel Injector Low-Pressure Connections - Part 2: Non-Threaded (Push-On) Connections
First Edition
Plastics pipes and fittings ù Automatic recognition systems for electrofusion joints First Edition [Replaced: ISO TR 13950]
Plastics Piping Systems - Test Method for the Resistance of Polyolefin Pipe/Pipe or Pipe/Fitting Assemblies to Tensile Loading First
Edition
Polyethylene (PE) Pipes and Fittings - Determination of the Tensile Strength and Failure Mode of Test Pieces from a Butt-Fused Joint
First Edition
Plastics Pipes and Fittings - Peel Decohesion Test for Polyethylene (PE) Electrofusion Assemblies of Nominal Outside Diameter
Greater Than or Equal to 90 mm First Edition
Plastics Pipes and Fittings - Crushing Decohesion Test for Polyethylene (PE) Electrofusion Assemblies First Edition
Plastics Pipes and Fittings - Polyethylene (PE) Tapping Tees - Test Method for Impact Resistance First Edition
Concentrates for Haemodialysis and Related Therapies First Edition
Water for Haemodialysis and Related Therapies First Edition
Cardiovascular implants and artificial organs Plasmafilters First Edition
Information Technology - Scalable Coherent Interface (SCI) IEEE Std 1596; First Edition
Information Technology - Data Interchange on 12,7 mm, 112-Track Magnetic Tape Cartridges - DLT 2 Format First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
13963
13964
13965
13966
13967
13968
13969
13976
Information Technology - Data Interchange on 90 mm Optical Disk Cartridges - Capacity: 230 Megabytes per Cartridge First Edition
Air Quality - Determination of Ozone in Ambient Air - Ultraviolet Photometric Method First Edition
Meat and Meat Products - Determination of Starch and Glucose Contents - Enzymatic Method First Edition
Thermoplastics Pipes and Fittings - Nominal Ring Stiffnesses First Edition
Thermoplastics Fittings - Determination of Ring Stiffness First Edition
Plastics Piping and Ducting Systems - Thermoplastics Pipes - Determination of Ring Flexibility First Edition
Milk and milk products Guidelines for a standardized description of microbial inhibitor tests First Edition
Hot-Rolled Steel Sheet in Coils of Structural Quality and Heavy Thickness Second Edition
ISO
13982-1
ISO
ISO
ISO
13982-2
13984
13985
ISO
13990-1
ISO
13990-2
ISO
ISO
13990-3
13992
ISO
13993
ISO
13994 CORR 1
ISO
13994
ISO
ISO
ISO
ISO
13995
13996
13997
13998
ISO
13999-1
ISO
13999-2
ISO
ISO
13999-3
14001
ISO
ISO
ISO
14004
14015
14020
Protective clothing for use against solid particulates Part 1: Performance requirements for chemical protective clothing providing
protection to the full body against airborne solid particulates (type 5 clothing) First Edition
Protective clothing for use against solid particulates Part 2: Test method of determination of inward leakage of aerosols of fine
particles into suits First Edition
Liquid Hydrogen - Land Vehicle Fuelling System Interface First Edition
Liquid hydrogen Land vehicle fuel tanks First Edition
Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 1: Vocabulary MatÚriel pour l'industrie
textile Fournisseurs de fil et dispositifs de surveillance pour machines Ó tricoter Partie 1: Vocabulaire First Edition; Cancels and
Replaces ISO 13990:1996
Textile Machinery and Accessories Yarn Feeders and Yarn Control for Knitting Machines Part 2: Connecting Dimensions for Yarn
Feeders and Yarn Control Devices First Edition; Cancels and Replaces ISO 13990: 1996
Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 3: Dimensions for connecting and
interconnection cables First Edition; Cancels and Replaces ISO 13990: 1996
Alpine touring ski-bindings Requirements and test methods Second Edition
Rental Ski Shop Practice - Sampling and Inspection of Complete and Incomplete Alpine Ski-Binding-Boot Systems in Rental
Applications First Edition
Clothing for protection against liquid chemicals ù Determination of the resistance of protective clothing materials to penetration by
liquids under pressure TECHNICAL CORRIGENDUM 1 Second Edition
Clothing for protection against liquid chemicals ù Determination of the resistance of protective clothing materials to penetration by
liquids under pressure Second Edition
Protective Clothing - Mechanical Properties - Test Method for the Determination of the Resistance to Puncture and Dynamic Tearing
of Materials First Edition
Protective Clothing - Mechanical Properties - Determination of Resistance to Puncture First Edition
Protective Clothing - Mechanical Properties - Determination of Resistance to Cutting by Sharp Objects First Edition
Protective Clothing - Aprons, Trousers and Vests Protecting Against Cuts and Stabs by Hand Knives First Edition
Protective Clothing - Gloves and Arm Guards Protecting Against Cuts and Stabs by Hand Knives - Part 1: Chain-Mail Gloves and
Arm Guards First Edition
Protective clothing Gloves and arm guards protecting against cuts and stabs by hand knives Part 2: Gloves and arm guards made
of material other than chain mail First Edition
Protective Dlothing - Globes and Arm Guards Protecting against Cuts and Stabs by Hand Knives - Part 3: Impact Cut Test for Fabric,
Leather and Other Materials First Edition
Environmental management systems Requirements with guidance for use Second Edition
Environmental Management Systems - General Guidelines on Principles, Systems and Supporting Techniques Second Edition
Environmental Management - Environmental Assessment of Sites and Organizations (EASO) First Edition
Environmental Labels and Declarations - General Principles Second Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14021
14024
14025
14031
14040
14041
14042
14043
14044
14050
14063
ISO
14064-1
ISO
14064-2
ISO
14064-3
ISO
14065
ISO
ISO
ISO
ISO
ISO
ISO
14096-1
14096-2
14102
14104
14111
14112
ISO
14113
ISO
ISO
14114
14118
ISO
ISO
14119 AMD 1
14119
ISO
14120
Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling) First Edition
Environmental Labels and Declarations - Type I Environmental Labelling - Principles and Procedures First Edition
Environmental Labels and Declarations - Type III Environmental Declarations First Edition
Environmental Management - Environmental Performance Evaluation - Guidelines First Edition
Environmental management Life cycle assessment Principles and framework Second Edition
Environmental Management - Life Cycle Assessment - Goal and Scope Definition and Inventory Analysis First Edition
Environmental Management - Life Cycle Assessment - Life Cycle Impact Assessment First Edition
Environmental Management - Life Cycle Assessment - Life Cycle Interpretation First Edition
Environmental management Life cycle assessment Requirements and guidelines First Edition
Environmental Management - Vocabulary Management Environnemental - Vocabulaire Second Edition
Environmental management Environmental communication Guidelines and examples First Edition
Greenhouse gases Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas
emissions and removals First Edition
Greenhouse gases Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse
gas emission reductions or removal enhancements First Edition
Greenhouse gases Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions First Edition
Greenhouse gases ù Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of
recognition First edition
Non-destructive testing Qualification of radiographic film digitisation systems Part 1: Definitions, quantitative measurements of
image quality parameters, standard reference film and qualitative control First Edition
Non-destructive testing Qualification of radiographic film digitisation systems Part 2: Minimum requirements First Edition
Information Technology - Guideline for the Evaluation and Selection of CASE Tools First Edition
Gears - Surface Temper Etch Inspection After Grinding First Edition; Corrected and Reprinted 02-15-1997
Natural Gas - Guidelines to Traceability in Analysis First Edition
Gas Welding Equipment - Small Kits for Gas Brazing and Welding First Edition
Gas Welding Equipment - Rubber and Plastic Hoses Assembled for Compressed or Liquefied Gases up to a Maximum Design
Pressure of 450 Bar First Edition
Gas Welding Equipment - Acetylene Manifold Systems for Welding, Cutting and Allied Processes - General Requirements First
Edition
Safety of Machinery - Prevention of Unexpected Start-Up
Safety of Machinery - Interlocking Devices Associated with Guards - Principles for Design and Selection AMENDMENT 1: Design to
minimize defeat possibilities First Edition
Safety of Machinery - Interlocking Devices Associated with Guards - Principles for Design and Selection First Edition
Safety of Machinery - Guards - General Requirements for the Design and Construction of Fixed and Movable Guards First Edition
ISO
ISO
14121
14121-1
Safety of Machinery - Principles of Risk Assessment First Edition
Safety of machinery ù Risk assessment ù Part 1: Principles First Edition
Safety of Machinery - Permanent Means of Access to Machinery - Part 1: Choice of Fixed Means of Access between Two Levels First
Edition
Safety of Machinery - Permanent Means of Access to Machinery - Part 2: Working Platforms and Walkways First Edition
Safety of Machinery - Permanent Means of Access to Machinery - Part 3: Stairs, Stepladders and Guard-Rails First Edition
Safety of machinery Permanent means of access to machinery Part 4: Fixed ladders First Edition
Safety of Machinery - Reduction of Risks to Health from Hazardous Substances Emitted by Machinery - Part 1: Principles and
Specifications for Machinery Manufacturers First Edition
Safety of Machinery - Reduction of Risks to Health from Hazardous Substances Emitted by Machinery - Part 2: Methodology Leading
to Verification Procedures First Edition
ISO
ISO
ISO
ISO
14122-1
14122-2
14122-3
14122-4
ISO
14123-1
ISO
14123-2
ISO
14125
ISO
14126
ISO
14129
ISO
ISO
14130
14131
ISO
14132-1
ISO
14132-2 CORR 1
ISO
14132-2
Fibre-Reinforced Plastic Composites - Determination of Flexural Properties First Edition; Technical Corrigendum 1: 07/15/2001
Fibre-Reinforced Plastic Composites - Determination of Compressive Properties in the In-Plane Direction First Edition; Replaces ISO
8515: 1991; Corrigendum 1 7/15/2001
Fibre-Reinforced Plastic Composites - Determination of the In -Plane Shear Stress/Shear Strain Response, Including the In-Plane
Shear Modulus and Strength, by the Plus or Minus 45 Degrees Tension Test Method First Edition
Fibre-Reinforced Plastic Composites - Determination of Apparent Interlaminar Shear Strength by Short-Beam Method First Edition;
Corrigendum 1: 11/1/2003
Agricultural sprayers Boom steadiness Test methods First Edition
Optics and optical instruments - Vocabulary for telescopic systems - Part 1: General terms and alphabetical indexes of terms in ISO
14132 Optique et instruments d'optique - Vocabulaire relatif aux systemes telescopiques - Partie 1: Termes generaux et index
alphabetiques des terms dans I'ISO 14132 First edition
Optics and optical instruments ù Vocabulary for telescopic systems ù Part 2: Terms for binoculars, monoculars and spotting scopes
TECHNICAL CORRIGENDUM 1 Optique et instruments d'optique ù Vocabulaire relatif aux syst×mes tÚlescopiques ù Partie 2:
Termes pour jumelles, monoculaires et lunettes RECTIFICATIF TECHNIQUE 1 First Edition
Optics and optical instruments Vocabulary for telescopic systems Part 2: Terms for binoculars, monoculars and spotting scopes
Optique et instruments d'optique Vocabulaire relatif aux syst×mes tÚlescopiques Partie 2: Termes pour jumelles, monoculaires et
lunettes First Edition
ISO
14132-3
Optics and optical instruments - Vocabulary for telescopic systems - Part 3: Terms for telescopic sights Optique et instruments
d'optique - Vocabulaire relatif aux systems telescopiques - Partie 3: Termes pour lunettes de pointage First edition
ISO
14132-4
Optics and optical instruments - Vocabulary for telescopic systems - Part 4: Terms for astronomical telescopes Optique et
instruments d'optique - Vocabulaire relatif aux systemes telescopiques - Partie 4: Terms pour telescopes astronomiques First edition
ISO
14133-1
ISO
ISO
ISO
ISO
14133-2
14134
14135-1
14135-2
ISO
14136
ISO
14137
Optics and optical instruments - Specifications for binoculars, monoculars and spotting scopes - Part 1: General purpose instruments
First Edition
Optics and optical instruments - Specifications for binoculars, monoculars and spotting scopes - Part 2: High performance
instruments First Edition
Optics and optical instruments Specifications for astronomical telescopes First Edition
Optics and optical instruments Specifications for telescopic sights Part 1:General-purpose instruments First Edition
Optics and optical instruments Specifications for telescopic sights Part 2: High-performance instruments First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Identification Supplementary Services First Edition; ETSI PRETS 300173:
1995
Machine Tools - Test Conditions for Wire Electrical-Discharge Machines (Wire EDM) - Terminology and Testing of the Accuracy First
Edition
ISO
14139
Hydrometric Determinations - Flow Measurements in Open Channels Using Structures - Compound Gauging Structures First Edition
ISO
14143-1
ISO
ISO
ISO
14143-2
14145-1
14145-2
ISO
14146
Information technology ù Software measurement ù Functional size measurement Part 1: Definition of concepts Second Edition
Information Technology - Software Measurement - Functional Size Measurement - Part 2: Conformity Evaluation of Software Size
Measurement Methods to ISO/IEC 14143-1:1998 First Edition
Roller Ball Pens and Refills - Part 1: General Use First Edition; Corrected and Reprinted 07/01/1999
Roller Ball Pens and Refills - Part 2: Documentary Use (DOC) First Edition
Radiation Protection - Criteria and Performance Limits for the Periodic Evaluation of Processors of Personal Dosemeters for X and
Gamma Radiation First Edition
ISO
14152
Neutron Radiation Protection Shielding - Design Principles and Considerations for the Choice of Appropriate Materials First Edition
ISO
ISO
14154
14155-1
ISO
ISO
ISO
14155-2
14156
14159
ISO
14160
ISO
ISO
14161
14163
Soil quality Determination of some selected hlorophenols Gas-chromatographic method with electron-capture etection First Edition
Clinical Investigation of Medical Devices for Human Subjects - Part 1: General Requirements First Edition
Clinical Investigation of Medical Devices for Human Subjects - Part 2: Clinical Investigation Plans First Edition; Together with the first
edition of 14155-1 Cancels and Replaces 14155: 1996
Milk and Milk Products - Extraction Methods for Lipids and Liposoluble Compounds First Edition; IDF 172
Safety of Machinery - Hygiene Requirements for the Design of Machinery First Edition
Sterilization of Single-Use Medical Devices Incorporating Materials of Animal Origin - Validation and Routine Control of Sterilization
by Liquid Sterilants First Edition
Sterilization of Health Care Products - Biological Indicators - Guidance for the Selection, Use and Interpretation of Results First
Edition
Acoustics - Guidelines for Noise Control by Silencers First Edition
ISO
14164
Stationary Source Emissions - Determination of the Volume Flowrate of Gas Streams in Ducts - Automated Method First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14165-114
14165-115
14165-116
14165-122
14165-131
14165-141
14165-211
14165-222
14165-241
14165-331
14165-414
14168
ISO
14169
ISO
14171
ISO
14172 CORR 2
ISO
14172 CORR 1
Information technology Fibre Channel Part 114: 100 MB/s balanced copper physical interface (FC-100-DF-EL-S) First Edition
Information technology û Fibre channel û Part 115: Physical interfaces (FC-PI) First Edition
Information technology Fibre channel Part 116: 10 Gigabit Fibre Channel (10GFC) First Edition
Information technology - Fibre channel - Part 122: Arbitrated loop-2 (FC-AL-2) First Edition
Information Technology - Fibre Channel - Part 131: Switch Fabric Requirements (FC-SW) First Edition
Information Technology - Fibre Channel - Part 141: Fabric Generic Requirements (FC-FG) First Edition
Information Technology - Fibre Channel - Part 211: Mapping to HIPPI-FP (FC-FP) First Edition
Information technology Fibre channel Part 222: Single-byte command sets-2 mapping protocol (FC-SB-2) First Edition
Information technology Fibre channel Part 241: Backbone 2 (FC-BB-2) First Edition
Information technology û Fibre channel û Part 331: Virtual interface (FC-VI) First edition
Information technology û Fibre channel û Part 414: Generic services-4 (FC-GS-4) First Edition
Metallic Powders, Excluding Hardmetals - Method for Testing Copper-Base Infiltrating Powders First Edition
Information Technology - 90 mm Flexible Disk Cartridges for Information Interchange - 21 MBytes Formatted Capacity - ISO Type
305 First Edition
Welding consumables Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels
Classification Frist Edition
Welding consumables ù Covered electrodes for manual metal arc welding of nickel and nickel alloys ù Classification TECHNICAL
CORRIGENDUM 2 First Edition
Welding consumables ù Covered electrodes for manual metal arc welding of nickel and nickel alloys ù Classification TECHNICAL
CORRIGENDUM 1 First Edition
ISO
ISO
ISO
ISO
14172
14174
14175
14180
Welding consumables ù Covered electrodes for manual metal arc welding of nickel and nickel alloys ù Classification First Edition
Welding consumables Fluxes for submerged arc welding Classification First Edition
Welding Consumables - Shielding Gases for Arc Welding and Cutting First Edition
Solid Mineral Fuels - Guidance on the Sampling of Coal Seams First Edition
ISO
14181
Animal Feeding Stuffs - Determination of Residues of Organochlorine Pesticides - Gas Chromatographic Method First Edition
ISO
14182
ISO
14183
Animal Feeding Stuffs - Determination of Residues of Organophosphorus Pesticides - Gas Chromatographic Method First Edition
Animal feeding stuffs Determination of monensin, narasin and salinomycin contents Liquid chromatographic method using postcolumn derivatization First Edition
ISO
14184-1
Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method) First Edition
ISO
ISO
14184-2
14190
Textiles - Determination of Formaldehyde - Part 2: Released Formaldehyde (Vapour Absorption Method) First Edition
Aerospace - Airframe Rolling Bearings: Ball and Spherical Roller Bearings - Technical Specification First Edition
ISO
14191
Aerospace - Airframe Spherical Roller Bearings, Single-Row, Self-Aligning, Diameter Series 3 and 4 - Metric Series First Edition
ISO
14192
ISO
14193
ISO
14194
ISO
14195
ISO
14196
Aerospace - Airframe Spherical Roller Bearings, Single-Row, Self-Aligning, Shielded, Intermediate Duty - Metric Series First Edition
Aerospace - Airframe Spherical Roller Bearings, Single-Row, Self-Aligning, Sealed, Extended Inner Ring, Intermediate Duty - Inch
Series First Edition
Aerospace - Airframe Spherical Roller Bearings, Double-Row, Self-Aligning, Sealed, Extended Inner Ring, Heavy Duty - Inch Series
First Edition
Aerospace - Airframe Spherical Roller Bearings, Double-Row, Self-Aligning, Sealed, Torque Tube Design, Light Duty - Inch Series
First Edition
Aerospace - Airframe Spherical Roller Bearings, Double-Row, Self-Aligning, Sealed, Plain Inner Ring, Heavy Duty - Inch Series First
Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14197
14201
14202
14203
14204
14206
14207
14208
14209
14210
Aerospace - Airframe Spherical Roller Bearings, Single-Row, Self-Aligning, Sealed, Intermediate Duty - Inch Series First Edition
Aerospace - Airframe Ball Bearings, Double-Row, Self-Aligning, Diameter Series 2 - Metric Series First Edition
Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Diameter Series 0 and 2 - Metric Series First Edition
Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Diameter Series 8 and 9 - Metric Series First Edition
Aerospace - Airframe Ball Bearings, Double-Row, Rigid, Diameter Series 0 - Metric Series First Edition
Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Sealed, Light Duty - Inch Series First Edition
Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Sealed, Light Duty - Inch Series First Edition
Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Sealed, Intermediate Duty - Inch Series First Edition
Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Precision, Sealed, Intermediate Duty - Inch Series First Edition
Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Sealed, Torque Tube Design, Light Duty - Inch Series First Edition
ISO
14211
Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Precision, Sealed Torque Tube Design, Light Duty - Inch Series First Edition
ISO
14212
ISO
ISO
ISO
ISO
ISO
ISO
14213
14214
14215
14216
14217
14218
Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Sealed, Torque Tube Design, Extra-Light Duty - Inch Series First Edition
Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Precision, Sealed, Torque Tube Design, Extra-Light Duty - Inch Series First
Edition
Aerospace - Airframe Ball Bearings, Double-Row, Rigid, Sealed, Heavy Duty - Inch Series First Edition
Aerospace - Airframe Ball Bearings, Double-Row, Rigid, Precision, Sealed, Heavy Duty - Inch Series First Edition
Aerospace - Airframe Ball Bearings, Double-Row, Self-Aligning, Sealed, Heavy Duty - Inch Series First Edition
Aerospace - Airframe Ball Bearings, Double-Row, Self-Aligning, Precision, Sealed, Heavy Duty - Inch Series First Edition
Aerospace - Airframe Ball Bearings, Single-Row, Self-Aligning, Sealed, Heavy Duty - Inch Series First Edition
ISO
ISO
ISO
ISO
14219
14220
14221
14223-1
Aerospace - Airframe Ball Bearings, Single-Row, Self-Aligning, Precision, Sealed, Heavy Duty - Inch Series First Edition
Aerospace - Airframe Ball Bearings, Single-Row, Self-Aligning, Sealed, Light Duty - Inch Series First Edition
Aerospace - Airframe Ball Bearings, Single-Row, Self-Aligning, Precision, Sealed, Light Duty - Inch Series First Edition
Radiofrequency identification of animals Advanced transponders Part 1: Air interface First Edition
Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
Second Edition
Small Craft - Magnetic Compasses First Edition
Road vehicles Unified diagnostic services (UDS) Specification and requirements Second Edition
Road Vehicles - Diagnostic Systems - Keyword Protocol 2000 - Part 1: Physical Layer First Edition
Road Vehicles - Diagnostic Systems - Keyword Protocol 2000 - Part 2: Data Link Layer First Edition
Road Vehicles - Diagnostic Systems - Keyword Protocol 2000 - Part 3: Application Layer First Edition
ISO
ISO
ISO
ISO
ISO
ISO
14224
14227
14229
14230-1
14230-2
14230-3
ISO
ISO
ISO
ISO
ISO
14230-4
14231
14232
14233
14235
ISO
14236
ISO
14237
ISO
14238
ISO
ISO
ISO
14239
14240-1
14240-2
ISO
ISO
14242-1
14242-2
ISO
ISO
14243-1
14243-2
Road Vehicles - Diagnostic Systems - Keyword Protocol 2000 - Part 4: Requirements for Emission-Related Systems First Edition
Thermal Spraying - Acceptance Inspection of Thermal Spraying Equipment First Edition
Thermal Spraying - Powders - Composition and Technical Supply Conditions First Edition
Dentistry - Polymer-Based Die Materials First Edition
Soil Quailty - Determination of Organic Carbon by Sulfochromic Oxidation First Edition
Plastics Pipes and Fittings - Mechanical-Joint Compression Fittings for Use with Polyethylene Pressure Pipes in Water Supply
Systems First Edition
Surface Chemical Analysis - Secondary-Ion Mass Spectrometry - Determination of Boron Atomic Concentration in Silicon Using
Uniformly Doped Materials First Edition
Soil Quality - Biological Methods - Determination of Nitrogen Mineralization and Nitrification in Soils and the Influence of Chemicals
on These Processes First Edition
Soil Quality - Laboratory Incubation Systems for Measuring the Mineralization of Organic Chemicals in Soil Under Aerobic Conditions
First Edition; BS 7755: Subsection 4.4.4: 1997
Soil Quality - Determination of Soil Microbial Biomass - Part 1: Substrate-Induced Respiration Method First Edition
Soil Quality - Determination of Soil Microbial Biomass - Part 2: Fumigation-Extraction Method First Edition
Implants for Surgery - Wear of Total Hip-Joint Prostheses - Part 1: Loading and Displacement Parameters for Wear-Testing
Machines and Corresponding Environmental Conditions for Test First Edition
Implants for Surgery - Wear of Total Hip-Joint Prostheses - Part 2: Methods of Measurement First Edition
Implants for Surgery - Wear of Total Knee-Joint Prostheses - Part 1: Loading and Displacement Parameters for Wear-Testing
Machines with Load Control and Corresponding Environmental Conditions for Test First Edition
Implants for Surgery - Wear of Total Knee-Joint Prostheses - Part 2: Methods of Measurement First Edition
ISO
14243-3 CORR 1
Implants for surgery ù Wear of total knee-joint prostheses ù Part 3: Loading and displacement parameters for wear-testing machines
with displacement control and corresponding environmental conditions for test TECHNICAL CORRIGENDUM 1 First Edition
ISO
ISO
ISO
ISO
ISO
14243-3
14245
14246
14250
14251
ISO
ISO
14253-1
14254
ISO
14255
ISO
14256-2
ISO
14257
Implants for surgery ù Wear of total knee-joint prostheses ù Part 3: Loading and displacement parameters for wear-testing machines
with displacement control and corresponding environmental conditions for test First Edition
Gas cylinders Specifications and testing of LPG cylinder valves Self-closing First Edition
Transportable Gas Cylinders - Gas Cylinder Valves - Manufacturing Tests and Inspections First Edition
Steel - Metallographic Characterization of Duplex Grain Size and Distribution First Edition
Information Technology - Data Interchange on 12,7 mm 36-Track Magnetic Tape Cartridges First Edition
Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment - Part 1: Decision
Rules for Proving Conformance or Non-Conformance with Specifications First Edition
Soil Quality - Determination of Exchangeable Acidity in Barium Chloride Extracts First Edition
Soil Quality - Determination of Nitrate Nitrogen, Ammonium Nitrogen and Total Soluble Nitrogen in Air-Dry Soils Using Calcium
Chloride Solution as Extractant First Edition
Soil quality Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution Part 2:
Automated method with segmented flow analysis First Edition
Acoustics - Measurement and Parametric Description of Spatial Sound Distribution Curves in Workrooms for Evaluation of Their
Acoustical Performance First Edition
ISO
ISO
14258
14268
Industrial Automation Systems - Concepts and Rules for Enterprise Models First Edition; Technical Corrigendum 1: 02-15-2000
Leather Physical and mechanical tests Determination of water vapour permeability First Edition; IULTCS/IUP 15
ISO
14269-1
ISO
14269-2
ISO
14269-3
ISO
14269-4
ISO
14269-5
ISO
14270
Tractors and Self-Propelled Machines for Agriculture and Forestry - Operator Enclosure Environment - Part 1: Vocabulary Tracteurs
Et Machines Automotrices Pour L'Agriculture Et La Sylviculture - Ambiance Dans L'Enceinte De L'Operateur - Partie 1: Vocabulaire
First Edition; Along with Other Parts of ISO 14269, Cancels and Replaces ISO 3737: 1976, ISO 6097: 1989 and ISO/TR 8953: 1987
Tractors and Self-Propelled Machines for Agriculture and Forestry - Operator Enclosure Environment - Part 2: Heating, Ventilation
and Air-Conditioning Test Method and Performance First Edition; Along with Other Parts of ISO 14269, Cancels and Replaces ISO
3737: 1976, ISO 6097: 1989 and ISO/TR 8953: 1987
Tractors and Self-Propelled Machines for Agriculture and Forestry - Operator Enclosure Environment - Part 3: Determination of Effect
of Solar Heating First Edition; Along with Other Parts of ISO 14269, Cancels and Replaces ISO 3737: 1976, ISO 6097: 1989 and
ISO/TR 8953: 1987
Tractors and Self-Propelled Machines for Agriculture and Forestry - Operator Enclosure Environment - Part 4: Air Filter Element Test
Method First Edition; Along with Other Parts of ISO 14269, Cancels and Replaces ISO 3737: 1976, ISO 6097: 1989 and ISO/TR
8953: 1987
Tractors and Self-Propelled Machines for Agriculture and Forestry - Operator Enclosure Environment - Part 5: Pressurization System
Test Method First Edition; Along with Other Parts of ISO 14269, Cancels and Replaces ISO 3737: 1976, ISO 6097: 1989 and ISO/TR
8953: 1987
Specimen Dimensions and Procedure for Mechanized Peel Testing Resistance Spot, Seam and Embossed Projection Welds First
Edition
ISO
14271
Vickers Hardness Testing of Resistance Spot, Projection and Seam Welds (Low Load and Microhardness) First Edition
ISO
14272
Specimen Dimensions and Procedure for Cross Tension Testing Resistance Spot and Embossed Projection Welds First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14273
14275
14276
14277
14278
14279
14280
14281
ISO
ISO
ISO
ISO
ISO
14284
14300-1
14300-2
14302
14303
ISO
14310
ISO
DIS 14310
Specimen Dimensions and Procedure for Shear Testing Resistance Spot, Seam and Embossed Projection Welds First Edition
Aerospace - Drives, Internal, Offset Cruciform, Ribbed - Metric Series First Edition
Aerospace - Drives, Internal, Offset Cruciform - Metric Series First Edition
Aerospace Drivers, Ribbed, for Internal Offset Cruciform Ribbed or Unribbed Drives Metric Series First Edition
Aerospace Gauges, for Internal Offset Cruciform Ribbed or Unribbed Drives Metric Series First Edition
Aerospace Drives, Internal, Cruciform Metric Series First Edition
Aerospace Drivers, Ribbed, for Internal Cruciform Ribbed or Unribbed Drives Metric Series First Edition
Aerospace Gauges, for Internal Cruciform Ribbed or Unribbed Drives Metric Series Frist Edition
Steel and Iron - Sampling and Preparation of Samples for the Determination of Chemical Composition First Edition; Replaces ISO
377-2: 1989
Space Systems - Programme Management - Part 1: Structuring of a Programme First Edition
Space Systems - Programme Management - Part 2: Product Assurance First Edition
Space systems - Electromagnetic compatibility requirements First Edition
Space Systems - Launch-Vehicle-To-Spacecraft Interfaces First Edition
Petroleum and Natural Gas Industries - Downhole Equipment - Packers and Bridge Plugs First Edition/ Cobranded with API SPEC
11D1
Petroleum and natural gas industries ù Downhole equipment ù Packers and bridge plugs [Superseded By: DS DS/EN ISO 14310,
DS DSF/PREN ISO 14310 REV]
ISO
ISO
ISO
ISO
ISO
14313
FDIS 14313
14314
14315
14317
ISO
ISO
14323
14324
ISO
14327
ISO
14329
Petroleum and Natural Gas Industries - Pipeline Transportation Systems - Pipeline Valves First Edition /Cobranded with API Spec 6D
Petroleum and natural gas industries ù Pipeline transportation systems ù Pipeline valves
Reciprocal internal combustion engines Recoil starting equipment General safety requirements First Edition
Industrial Wire Screens - Technical Requirements and Testing First Edition
Sintered metal materials excluding hardmetals Determination of compressive yield strength First Edition
Resistance spot welding and projection welds Destructive testing of welds Specimen dimensions and procedure for impact shear
test and cross-tension testing First Edition
Resistance spot welding Destructive tests of welds Method for the fatigue testing of spot welded joints First Edition
Resistance welding Procedures for determining the weldability lobe for resistance spot, projection and seam welding First Edition
Resistance welding Destructive tests of welds Failure types and geometric measurements for resistance spot, seam and projection
welds First Edition
Welding consumables Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels
Classification First edition
Welding Consumables - Wire Electrodes, Wires and Rods for Arc Welding of Stainless and Heat Resisting Steels - Classification
First Edition
Welding and Allied Processes - Flux and Gas Shielded Electronical Welding Processes - Procurement Guidelines for Consumables
First Edition
Dentistry - Duplicating Materials First Edition
Winter-Sports Equipment - Marking of Parts Made of Polymer Materials First Edition
ISO
14341
ISO
14343
ISO
ISO
ISO
14344
14356
14359
ISO
ISO
ISO
14368-1
14368-2
14368-3
ISO
ISO
14372
14373
ISO
ISO
14377
14378
ISO
14396
ISO
14397-1
ISO
14397-2
ISO
ISO
ISO
ISO
ISO
ISO
14400
14401-1
14401-2
14402
14403
14408
ISO
14416
Road vehicles Wheels and rims Use, general maintenance and safety requirements and out-of-service conditions First edition
Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 1: Test methods First Edition
Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria First Edition
Water Quality - Determination of Phenol Index by Flow Analysis (FIA and CFA) First Edition
Water Quality - Determination of Total Cyanide and Free Cyanide by Continuous Flow Analysis First Edition
Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information Second edition
Information and documentation Requirements for binding of books, periodicals, serials and other paper documents for archive and
library use Methods and materials First Edition
ISO
ISO
14417
14419
Information Technology - Data Recording Format DD-1 for Magnetic Tape Cassette Conforming to ISO/IEC 1016 First Edition
Textiles - Oil Repellency - Hydrocarbon Resistance Test First Edition; Technical Corrigendum 1: 09/15/2004
Mineral and Sapphire Watch-Glasses - Part 1: Dimensions and Tolerances First Edition; Technical Corrigendum 1: 01/15/2006
Mineral and Sapphire Watch-Glasses - Part 2: Assembly to the Case by Adhesive or Using a Gasket First Edition
Mineral and sapphire watch-glasses Part 3: Qualitative criteria and test methods First Edition
Welding Consumables - Determination of Moisture Resistance of Manual Metal Arc Welding Electrodes by Measurement of Diffusible
Hydrogen First Edition
Resistance welding Procedure for spot welding of uncoated and coated low carbon steels First Edition
Canned Evaporated Milk - Determination of Tin Content - Method Using Graphite Furnance Atomic Absorption Spectrometry First
Edition; IDF 168
Milk and Dried Milk - Determination of Iodide Content - Method Using High-Performance Liquid Chromatography First Edition
Reciprocating Internal Combustion Engines - Determination and Method for the Measurement of Engine Power - Additional
Requirements for Exhaust Emission Tests in Accordance with ISO 8178 First Edition; Replaces ISO TR 14396
Earth-moving machinery ù Loaders and backhoe loaders ù Part 1: Calculation of rated operating capacity and test method for
verifying calculated tipping load Second Edition
Earth-moving machinery ù Loaders and backhoe loaders ù Part 2: Test method for measuring breakout forces and lift capacity to
maximum lift height Second Edition
ISO
ISO
14420
14422
ISO
14427
ISO
14428
ISO
ISO
14435
14438
ISO
14442
ISO
14443-1
ISO
14443-2
ISO
14443-3
ISO
14443-3 FDAM 3
ISO
14443-4
ISO
14443-4 FDAM 1
ISO
ISO
14446
14453
ISO
14460
ISO
14461-1
ISO
ISO
ISO
14461-2
14469-1
14469-3
Carbonaceous products for the production of aluminium Baked anodes and shaped carbon products Determination of the coefficient
of linear thermal expansion First Edition
Carbonaceous Materials Used in the Production of Aluminium - Cold-Ramming Pastes - Methods of Sampling First Edition
Carbonaceous materials used in the production of aluminium Cold and tepid ramming pastes Preparation of unbaked test
specimens and determination of apparent density after compaction First Edition
Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking First
Edition
Carbonaceous materials for the production of aluminium Petroleum coke Determination of trace metals by inductively coupled
plasma atomic emission spectrometry First Edition
Glass in Building - Determination of Energy Balance Value - Calculation Method First Edition
Water quality Guidelines for algal growth inhibition tests with poorly soluble materials, volatile compounds, metals and waste water
Second Edition
Identification Cards - Contactless Integrated Circuit(s) Cards - Proximity Cards - Part 1: Physical Characteristics First Edition
Identification Cards - Contactless integrated circuit(s) cards - Proximity cards - Part 2: Radio frequency power and signal interface
First Edition; Amendment 1: 06/01/2005
Identification Cards - Contactless integrated circuit(s) cards - Proximity cards - Part 3: Initialization and anticollision AMENDMENT 3:
Handling of reserved fields and values First Edition; Amendment 1: 06/01/2005; Amendment 3: 3/15/2006; Technical Corrigendum 1:
09/01/2006
Identification cards Contactless integrated circuit(s) cards Proximity cards Part 3: Initialization and anticollision AMENDMENT 3:
Handling of reserved fields and values 2001
Identification Cards - Contactless Integrated Circuit(s) Cards - Proximity Cards - Part 4: Transmission Protocol First Edition;
Amendment 1: 3/15/2006
Identification cards Contactless integrated circuit(s) cards Proximity cards Part 4: Transmission protocol AMENDMENT 1: Handling
of reserved fields and values 2001
Binders for Paints and Varnishes - Determination of the Viscosity of Industrial Cellulose Nitrate Solutions and Classification of Such
Solutions First Edition
Pulps - Determination of Acetone-Soluble Matter First Edition; Cancels and Replaces ISO 624: 1974
Protective Clothing for Automobile Racing Drivers - Protection Against Heat and Flame - Performance Requirements and Test
Methods First Edition; Amendment 1: 03/15/2002
Milk and milk products Quality control in microbiological laboratories Part 1: Analyst performance assessment for colony counts First
edition
Milk and milk products Quality control in microbiological laboratories Part 2: Determination of the reliability of colony counts of
parallel plates and subsequent dilution steps First edition
Road vehicles Compressed natural gas (CNG) refuelling connector Part 1: 20 MPa (200 bar) connector First Edition
Road vehicles Compressed natural gas (CNG) refuelling connector Part 3: 25 MPa (250 bar) connector First Edition
ISO
14473
Information Technology - Office Equipment - Minimum Information to Be Specified for Image Scanners First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Functional Requirements for Static Circuit-Mode Inter-PINX Connections First Edition
ISO
14474
ISO
14476-1
ISO
14476-2
ISO
14478-1
ISO
14478-2
ISO
14478-3
ISO
ISO
14478-4
14487
Information Technology - Enhanced Communications Transport Protocol: Specification of Simplex Multicast Transport First Edition
Information technology Enhanced communications transport protocol: Specification of QoS management for simplex multicast
transport First Edition
Information Technology - Computer Graphics and Image Processing - Presentation Environment for Multimedia Objects (PREMO) Part 1: Fundamentals of PREMO First Edition
Information Technology - Computer Graphics and Image Processing - Presentation Environment for Multimedia Objects (PREMO) Part 2: Foundation Component First Edition; Corrected and Reprinted 09/15/2000
Information Technology - Computer Graphics and Image Processing - Presentation Environment for Multimedia Objects (PREMO) Part 3: Multimedia Systems Services First Edition
Information Technology - Computer Graphics and Image Processing - Presentation Environment for Multimedia Objects (PREMO) Part 4: Modelling, Rendering and Interaction Component First Edition
Pulps - Standard Water for Physical Testing First Edition
ISO
14490-1
Optics and optical instruments - Test methods for telescopic systems - Part 1: Test methods for basic characteristics First Edition
ISO
14490-2
Optics and optical instruments Test methods for telescopic systems Part 2: Test methods for binocular systems First Edition
ISO
14490-3
Optics and optical instruments Test methods for telescopic systems Part 3: Test methods for telescopic sights First Edition
ISO
ISO
14490-4
14490-5
Optics and optical instruments Test methods for telescopic systems Part 4: Test methods for astronomical telescopes First Edition
Optics and optical instruments - Test methods for telescopic systems - Part 5: Test methods for transmittance First Edition
ISO
14490-6
Optics and optical instruments Test methods for telescopic systems Part 6: Test methods for veiling glare index First Edition
ISO
14490-7
ISO
14492
ISO
14495-1
ISO
ISO
14495-2
14496-1 CORR 2
Optics and optical instruments Test methods for telescopic systems Part 7: Test methods for limit of resolution First Edition
Information technology Lossy/lossless coding of bi-level images AMENDMENT 1: Encoder First Edition; Amendment 2: 12/15/2003;
Amendment 1: 12/15/2004
Information Technology - Lossless and Near-Lossless Compression of Continuous-Tone Still Images: Baseline First Edition;
Corrected and Reprinted 09/15/2000
Information Technology - Lossless and Near-Lossless Compression of Continuous-Tone Still Images - Part 2: Extensions Second
Edition
Information technology ù Coding of audio-visual objects ù Part 1: Systems TECHNICAL CORRIGENDUM 2 Third Edition
ISO
14496-1 AMD 2
ISO
ISO
ISO
14496-1 AMD 1
14496-1
14496-1 FDAM 3
Information technology ù Coding of audio-visual objects ù Part 1: Systems AMENDMENT 2: 3D compression profile and level
indication Third Edition
Information technology ù Coding of audio-visual objects ù Part 1: Systems AMENDMENT 1: Text profile and level indication Third
Edition
Information technology ù Coding of audio-visual objects ù Part 1: Systems Third Edition
Information technology ù Coding of audio-visual objects ù Part 1: Systems AMENDMENT 3: JPEG 2000 support in MPEG-4
ISO
14496-2 AMD 3
Information technology ù Coding of audio-visual objects ù Part 2: Visual AMENDMENT 3: Support for colour spaces Third Edition
ISO
ISO
14496-2 AMD 2
14496-2 CORR 1
ISO
ISO
14496-2 AMD 1
14496-2
ISO
14496-3 AMD 5
ISO
14496-3 AMD 1
ISO
14496-3 CORR 1
ISO
14496-3 AMD 3
ISO
ISO
14496-3 AMD 2
14496-3
ISO
14496-3 FDAM 5
ISO
14496-4 CORR 1
ISO
14496-4 AMD 15
ISO
14496-4 AMD 17
ISO
14496-4 AMD 12
Information technology ù Coding of audio-visual objects ù Part 2: Visual AMENDMENT 2: New levels for simple profile Third Edition
Information technology ù Coding of audio-visual objects ù Part 2: Visual TECHNICAL CORRIGENDUM 1 Third Edition
Information technology ù Coding of audio-visual objects ù Part 2: Visual AMENDMENT 1: Error resilient simple scalable profile Third
Edition
Information technology ù Coding of audio-visual objects ù Part 2: Visual Third Edition
Information technology ù Coding of audio-visual objects ù Part 3: Audio AMENDMENT 5: BSAC extensions and transport of MPEG
Surround Third Edition
Information technology ù Coding of audio-visual objects ù Part 3: Audio AMENDMENT 1: Low delay AAC profile Third Edition
Information technology ù Coding of audio-visual objects ù Part 3: Audio AMENDMENT 2: Audio Lossless Coding (ALS), new audio
profiles and BSAC extensions TECHNICAL CORRIGENDUM 1 Third Edition
Information technology ù Coding of audio-visual objects ù Part 3: Audio AMENDMENT 3: Scalable Lossless Coding (SLS) Third
Edition
Information technology ù Coding of audio-visual objects ù Part 3: Audio AMENDMENT 2: Audio Lossless Coding (ALS), new audio
profiles and BSAC extensions Third Edition
Information technology ù Coding of audio-visual objects ù Part 3: Audio Third Edition
Information technology ù Coding of audio-visual objects ù Part 3: Audio AMENDMENT 5: BSAC extensions and transport of MPEG
Surround
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 6: Advanced Video Coding
conformance TECHNICAL CORRIGENDUM 1 Second edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 15: Lossless coding of
oversampled audio Second edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 17: Advanced text and 2D
graphics conformance Second edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 12: Morphing& Textures
conformance Second edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14496-4 CORR 2
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing TECHNICAL CORRIGENDUM 2 First Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 13: Parametric coding for high
14496-4 AMD 13 quality audio conformance
14496-4 CORR 2 Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 11: Parametric stereo
TO AMD 11
conformance TECHNICAL CORRIGENDUM 2
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing TECHNICAL CORRIGENDUM 3 Second
14496-4 CORR 3 Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 11: Parametric stereo
14496-4 AMD 11 conformance Second Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 9: AVC fidelity range
14496-4 AMD 9 extensions conformance Second Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 10: Conformance extensions
14496-4 AMD 10 for simple profile levels 4a and 5 Second Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing TECHNICAL CORRIGENDUM 1 Second
14496-4 CORR 1 Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 6: Advanced Video Coding
14496-4 AMD 6 conformance Second Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 8: High Efficiency Advanced
14496-4 AMD 8 Audio Coding, audio BIFS, and structured audio conformance Second Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 7: AFX conformance
14496-4 AMD 7 extensions Second Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 5: Conformance extensions for
14496-4 AMD 5 error-resilient simple scalable profile Second Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 4: IPMPX conformance
14496-4 AMD 4 extensions Second Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 3: Visual new levels and tools
14496-4 AMD 3 Second Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 2: MPEG-4 conformance
14496-4 AMD 2 extensions for XMT and media nodes Second Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 1: Conformance testing for
14496-4 AMD 1 MPEG-4 Second Edition
14496-4
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing Second Edition
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 19: Audio lossless coding
14496-4 FDAM 19 (ALS)
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 18: Conformance of MPEG-1/2
14496-4 FDAM 18 Audio in MPEG-4
14496-4 FDAM 14 Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 14: BSAC conformance
Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 9: Morphing& Textures
14496-5 AMD 9 reference software Second Edition
14496-5 AMD 10 Information technology Coding of audio-visual objects Part 5: Reference software Second Edition
Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 6: Advanced Video Coding
(AVC) and High Efficiency Advanced Audio Coding (HE AAC) reference software TECHNICAL CORRIGENDUM 1 Second Edition
Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 8: AVC fidelity range extensions
14496-5 AMD 8 reference software Second Edition
Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 6: Advanced Video Coding
14496-5 AMD 6 (AVC) and High Efficiency Advanced Audio Coding (HE AAC) reference software Second Edition
Information technology Coding of audio-visual objects Part 5:Reference software AMENDMENT 7: AFX reference software
14496-5 AMD 7 extensions Second Edition
Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 5: Reference software
14496-5 AMD 5 extensions for error resilient simple scalable profile Second Edition
Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 4: IPMPX reference software
14496-5 AMD 4 extensions Second Edition
Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 3: Visual new level and tools
14496-5 AMD 3 Second Edition
Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 2: MPEG-4 reference software
14496-5 AMD 2 extensions for XMT and media nodes Second Edition
Information technology Coding of audio-visual objects Part 5: Reference software AMENDMENT 1: Reference software for MPEG-4
14496-5 AMD 1 Second Edition
14496-5
Information Technology - Coding of Audio-Visual Objects - Part 5: Reference Software Second Edition
Information technology ù Coding of audio-visual objects Part 5: Reference software AMENDMENT 11: MPEG-J GFX Reference
14496-5 FDAM 11 software
Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 12: Updated file format
14496-5 FDAM 12 reference software
14496-5 CORR 1
ISO
14496-6
Information Technology - Coding of Audio-Visual Objects - Part 6: Delivery Multimedia Integration Framework (DMIF) Second Edition
ISO
14496-8
Information technology Coding of audio-visual objects Part 8: Carriage of ISO/IEC 14496 contents over IP networks First Edition
ISO
14496-10 AMD 1
ISO
ISO
14496-10 CORR 2
14496-10
ISO
14496-10 FDAM 2
ISO
ISO
14496-11 AMD 5
14496-11
ISO
14496-12 CORR 3
ISO
14496-12 AMD 1
ISO
14496-12 CORR 2
ISO
14496-12 CORR 1
ISO
14496-12
ISO
14496-13
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Information technology ù Coding of audio-visual objects ù Part 10: Advanced Video Coding AMENDMENT 1: Support for colour
spaces and aspect ratio definitions Third Edition
Information technology ù Coding of audio-visual objects ù Part 10: Advanced Video Coding TECHNICAL CORRIGENDUM 2 Third
Edition
Information technology ù Coding of audio-visual objects ù Part 10: Advanced Video Coding Third Edition
Information technology ù Coding of audio-visual objects Part 10: Advanced Video Coding AMENDMENT 2: New profiles for
professional applications
Information technology ù Coding of audio-visual objects ù Part 11: Scene description and application engine AMENDMENT 5:
Support for Symbolic Music Notation First edition
Information technology Coding of audio-visual objects Part 11: Scene description and application engine First edition
Information technology ù Coding of audio-visual objects ù Part 12: ISO base media file format TECHNICAL CORRIGENDUM 3
Second edition
Information technology ù Coding of audio-visual objects ù Part 12: ISO base media file format AMENDMENT 1: Support for timed
metadata, non-square pixels and improved sample groups Second edition
Information technology ù Coding of audio-visual objects ù Part 12: ISO base media file format TECHNICAL CORRIGENDUM 2
Second edition
Information technology ù Coding of audio-visual objects ù Part 12: ISO base media file format TECHNICAL CORRIGENDUM 1
Second edition
Information technology Coding of audio-visual objects Part 12: ISO base media file format Second edition; Corrected Version
10/1/2005
Information technology Coding of audio-visual objects Part 13: Intellectual Property Management and Protection (IPMP) extensions
First Edition
14496-14 CORR 1 Information technology ù Coding of audio-visual objects ù Part 14: MP4 file format TECHNICAL CORRIGENDUM 1 First Edition
14496-14
Information technology Coding of audio-visual objects Part 14: MP4 file format First Edition
Information technology ù Coding of audio-visual objects ù Part 15: Advanced Video Coding (AVC) file format TECHNICAL
14496-15 CORR 2 CORRIGENDUM 2 First Edition
Information technology ù Coding of audio-visual objects ù Part 15: Advanced Video Coding (AVC) file format AMENDMENT 1:
14496-15 AMD 1 Support for FRExt First Edition
Information technology ù Coding of audio-visual objects ù Part 15: Advanced Video Coding (AVC) file format TECHNICAL
14496-15 CORR 1 CORRIGENDUM 1 First Edition
14496-15
Information technology ù Coding of audio-visual objects ù Part 15: Advanced Video Coding (AVC) file format First Edition
Information technology ù Coding of audio-visual objects ù Part 16: Animation Framework eXtension (AFX) AMENDMENT 1:
14496-16 AMD 1 Geometry and shadow Second Edition
14496-16
Information technology Coding of audio-visual objects Part 16: Animation Framework eXtension (AFX) Second Edition
14496-17
Information technology Coding of audio-visual objects Part 17: Streaming text format First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14496-18 TECH
CORR 1
14496-18
14496-19
Information technology - Coding of audio-visual objects Part 18: Font compression and streaming
Information technology Coding of audio-visual objects Part 18: Font compression and streaming First Edition
Information technology Coding of audio-visual objects Part 19: Synthesized texture stream First Edition
Information technology ù Coding of audio-visual objects ù Part 20: Lightweight Application Scene Representation (LASeR) and
14496-20 CORR 1 Simple Aggregation Format (SAF) First Edition
Information technology Coding of audio-visual objects Part 20: Lightweight Application Scene Representation (LASeR) and Simple
14496-20
Aggregation Format (SAF) First Edition
Information technology ù Coding of audio-visual objects ù Part 21: MPEG-J Graphics Framework eXtensions (GFX) TECHNICAL
14496-21 CORR 1 CORRIGENDUM 1
14496-21
Information technology Coding of audio-visual objects Part 21: MPEG-J Graphics Framework eXtensions (GFX)
14496-22
Information technology ù Coding of audio-visual objects ù Part 22: Open Font Format First Edition
Textile machinery and accessories Harnesses for Jacquard weaving machines Vocabulary MatÚriel pour l'industrie textile et
14500
accessoires Harnais pour mÚtiers Ó tisser Jacquard Vocabulaire First Edition
Milk and Milk Powder - Determination of Aflatoxin M1 Content - Clean-Up by Immunoaffinity Chromatography and Determination by
14501
High-Performance Liquid Chromatography First Edition
Determination of substances characteristic of green and black tea ù Part 1: Content of total polyphenols in tea ù Colorimetric method
14502-1 CORR 1 using Folin-Ciocalteu reagent TECHNICAL CORRIGENDUM 1 First Edition
Determination of substances characteristic of green and black tea ù Part 1: Content of total polyphenols in tea ù Colorimetric method
14502-1
using Folin- Ciocalteu reagent First edition
Determination of substances characteristic of green and black tea ù Part 2: Content of catechins in green tea ù Method using high14502-2 CORR 1 performance liquid chromatography TECHNICAL CORRIGENDUM 1 First Edition
Determination of substances characteristic of green and black tea ù Part 2: Content of catechins in green tea ù Method using high14502-2
performance liquid chromatography First edition
Ergonomics of the thermal environment ù Evaluation of thermal environments in vehicles ù Part 2: Determination of equivalent
14505-2 CORR 1 temperature - TECHNICAL CORRIGENDUM 1 First Edition
Ergonomics of the thermal environment Evaluation of thermal environments in vehicles Part 2: Determination of equivalent
14505-2
temperature First Edition
Ergonomics of the thermal environment Evaluation of thermal environments in vehicles Part 3: Evaluation of thermal comfort using
14505-3
human subjects First Edition
14507
Soil Quality - Pretreatment of Samples for Determination of Organic Contaminants First Edition
14508
Road Vehicles - Spark-Plugs - Terminals Second Edition
ISO
14509
Small Craft - Measurement of Airborne Sound Emitted by Powered Recreational Craft First Edition; Amendment 1: 09/15/2004
ISO
14509-2
Small craft Airborne sound emitted by powered recreational craft Part 2: Sound assessment using reference craft First Edition
ISO
ISO
ISO
ISO
14511
14512
14513 CORR 1
14513
Measurement of Fluid Flow in Closed Conduits - Thermal Mass Flowmeters First Edition
Passenger Cars - Straight-Ahead Braking on Surfaces with Split Coefficient of Friction - Open-loop Test Method First Edition
Road vehicles - Pedestrian protection - Head impact test method - TECHNICAL CORRIGENDUM 1 First Edition
Road vehicles Pedestrian protection Head impact test method First Edition
Information technology Portable Operating System Interface (POSIX) Test methods for measuring conformance to POSIX Part 1:
System interfaces First Edition; IEEE 2003.1: 2000; Amendment 1:12/15/2003
Information Technology - 130 mm Optical Disk Cartridges for Information Interchange - Capacity: 2,6 Gbytes per Cartridge First
Edition; Corrected and Reprinted 07/15/1998
Cranes Requirements for test loads First Edition
Information Technology - POSIX Ada Language Interfaces - Binding for System Application Program Interface (API) Second Edition;
IEEE Std 1003.5b
Gaseous fire-extinguishing systems ù Physical properties and system design ù Part 1: General requirements TECHNICAL
CORRIGENDUM 1 Second Edition
Gaseous fire-extinguishing systems Physical properties and system design Part 1: General requirements Second Edition
Gaseous fire-extinguishing systems Physical properties and system design Part 2: CF3I extinguishant Second Edition
Gaseous fire-extinguishing systems Physical properties and system design Part 5: FK-5-1-12 extinguishant First Edition
ISO
14515-1
ISO
ISO
14517
14518
ISO
14519
ISO
ISO
ISO
ISO
14520-1 CORR 1
14520-1
14520-2
14520-5
ISO
ISO
14520-6
14520-8
Gaseous fire-extinguishing systems Physical properties and system design Part 6: HCFC Blend A extinguishant Second Edition
Gaseous fire-extinguishing systems Physical properties and system design Part 8: HFC 125 extinguishant Second Edition
ISO
ISO
14520-9
14520-10
Gaseous Fire-Extinguishing Systems - Physical Properties and System Design - Part 9: HFC 227ea Extinguishant Second Edition
Gaseous fire-extinguishing systems - Physical properties and system design - HFC 23 extinguishant Second Edition
ISO
ISO
14520-11
14520-12
Gaseous fire-extinguishing systems - Physical properties and system design - Part 11: HFC 236fa extinguishant Second Edition
Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-01 extinguishant Second Edition
ISO
ISO
14520-13
14520-14
Gaseous fire-extinguishing systems - Physical properties and system design - Part 13: IG-100 extinguishant Second Edition
Gaseous fire-extinguishing systems - Physical properties and system design - Part 14: IG-55 extinguishant Second Edition
ISO
ISO
14520-15
14523
Gaseous fire-extinguishing systems - Physical properties and system design - Part 15: IG-541 extinguishant Second Edition
Photography - Processed Photographic Materials - Photographic Activity Test for Enclosure Materials First Edition
ISO
14524
ISO
14526-1
Photography - Electronic Still-Picture Cameras - Methods for Measuring Opto-Electronic Conversion Functions (OECFs) First Edition
Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 1: Designation System and Basis for Specifications First Edition
[Cancelled: ISO 800]
ISO
14526-2
ISO
14526-3
ISO
14527-1
ISO
14527-2
ISO
14527-3
ISO
14528-1
ISO
14528-2
ISO
14528-3
ISO
14529-1
ISO
14529-2
ISO
14529-3
ISO
14530-1
ISO
14530-2
ISO
14530-3
ISO
14531-1
ISO
14531-2
ISO
14531-3
Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 2: Preparation of Test Specimens and Determination of
Properties First Edition [Cancelled: ISO 800]
Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 3: Requirements for Selected Moulding Compounds First Edition
[Cancelled: ISO 800]
Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 1:
Designation System and Basis for Specifications First Edition; (Together with ISO 14527-2;1999, ISO 14527-3;1999, ISO 145281:1999, ISO 14528-2:1999 and ISO 14528-3:1999 Replaces ISO 2112:1990)
Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 2:
Preparation of Test Specimens and Determination of Properties First Edition [Cancelled: ISO 2112]
Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 3:
Requirements for Selected Moulding Compounds First Edition [Cancelled: ISO 2112]
Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 1: Designation System and Basis for
Specifications First Edition [Cancelled: ISO 2112]
Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 2: Preparation of Test Specimens and
Determination of Properties First Edition [Cancelled: ISO 2112]
Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 3: Requirements for Selected Moulding
Compounds First Edition [Cancelled: ISO 2112]
Plastics - Melamine/Phenolic Powder Moulding Compounds (MF-PMCs) - Part 1: Designation System and Basis for Specifications
First Edition [Cancelled: ISO 4896]
Plastics - Melamine/Phenolic Powder Moulding Compounds (MF-PMCs) - Part 2: Preparation of Test Specimens and Determination
of Properties First Edition [Cancelled: ISO 4896]
Plastics - Melamine/Phenolic Powder Moulding Compounds (MF-PMCs) - Part 3: Requirements for Selected Moulding Compounds
First Edition [Cancelled: ISO 4896]
Plastics - Unsaturated-Polyester Powder Moulding Compounds (UP-PMCs) - Part 1: Designation System and Basis for Specifications
First Edition
Plastics - Unsaturated-Polyester Powder Moulding Compounds (UP-PMCs) - Part 2: Preparation of Test Specimens and
Determination of Properties First Edition
Plastics - Unsaturated-Polyester Powder Moulding Compounds (UP-PMCs) - Part 3: Requirements for Selected Moulding
Compounds First Edition
Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series
Specifications Part 1: Pipes First Edition
Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series
Specifications Part 2: Fittings for heat-fusion jointing First Edition
Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series
Specifications Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) First Edition
Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series
Specifications Part 4: System design and installation guidelines First Edition
Natural Gas - Vocabulary Gaz Naturel - Vocabulaire First Edition; Corrigendum 1 5/15/2002
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Fundamental Requirements Second Edition
Photography - Room-Light Loading Packages for Electronic Scanners and Image-Setting Film and Paper Rolls - Dimensions and
Related Requirements First Edition
Manipulating Industrial Robots - Object Handling with Grasp-Type Grippers - Vocabulary and Presentation of Characteristics Robots
Manipulateurs Industriels - Manipulation Des Object Par Prehensures A Pince - Vocalbulair Et Presentation Des Caractertiques First
Edition
Information technology û Home electronic system (HES) architecture û Part 2-1: Introduction and device modularity First Edition;
Supersedes ISO/IEC TR 14543-1 and ISO/IEC TR 14543-2
ISO
ISO
ISO
14531-4
14532
14534
ISO
14535
ISO
14539
ISO
14543-2-1
ISO
14543-3-1
ISO
14543-3-2
ISO
14543-3-3
ISO
14543-3-4
ISO
14543-3-5
ISO
14543-3-6
ISO
ISO
ISO
ISO
14543-3-7
14545
14546
14548
ISO
14554-1
Information technology û Home electronic system (HES) architecture û Part 3-1: Communication layers û Application layer for
network based control of HES Class 1 First Edition; Together With ISO/IEC 14543-3-1: 2006 Supersedes ISO/IEC TR 14543-3: 2000
Information technology û Home electronic system (HES) architecture û Part 3-2: Communication layers û Transport, network and
general parts of data link layer for network based control of HES Class 1 First Edition; Together With ISO/IEC 14543-3-2: 2006
Supersedes ISO/IEC TR 14543-3: 2000
Information technology û Home electronic system (HES) architecture û Part 3-3: User process for network based control of HES
Class 1 First Edition
Information technology û Home electronic system (HES) architecture û Part 3-4: System management û Management procedures for
network based control of HES Class 1 First edition
Information technology û Home electronic system (HES) architecture û Part 3-5: Media and media dependent layers û Powerline for
network based control of HES Class 1 First edition
Information technology û Home electronic system (HES) architecture û Part 3-6: Media and media dependent layers û Twisted pair
for network based control of HES Class 1 First edition
Information technology û Home electronic system (HES) architecture û Part 3-7: Media and media dependent layers û Radio
frequency for network based control of HES Class 1 First edition
Information Technology - Office Equipment - Method for Measuring Copying Machine Productivity First Edition
Photography - Aerial Films and Spools - Dimensions First Edition
Photography - Dimensions of Glass Plates First Edition
Quality Requirements for Welding - Resistance Welding of Metallic Materials - Part 1: Comprehensive Quality Requirements First
Edition
ISO
ISO
ISO
14554-2
14555
14556
Quality Requirements for Welding - Resistance Welding of Metallic Materials - Part 2: Elementary Quality Requirements First Edition
Welding - Arc Stud Welding of Metallic Materials Second Ediiton
Steel - Charpy V-Notch Pendulum Impact Test - Instrumented Test Method First Edition; Amendment 1: 07/01/2006
ISO
ISO
14556 FDAM 1
14557
Steel Charpy V-notch pendulum impact test Instrumented test method AMENDMENT 1: Annex D Instrumented Charpy V-notch
pendulum impact test of sub-size test pieces
Fire-Fighting Hoses - Rubber and Plastics Suction Hoses and Hose Assemblies First Edition
ISO
ISO
14558
14560
Rubber - Determination of Residual Unsaturation of Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectroscopy First Edition
Acceptance sampling procedures by attributes Specified quality levels in nonconforming items per million First Edition
ISO
ISO
ISO
14565
14567
14568
ISO
ISO
14572
14573
ISO
ISO
14575
14576
Animal Feeding Stuffs - Determination of Vitamin A Content - Method Using High-Performance Liquid Chromatography First Edition
Personal Protective Equipment for Protection Against Falls from a Height - Single-Point Anchor Devices First Edition
Information Technology - DXL: Diagram EXchange Language for Tree-Structured Charts First Edition
Road vehicles Round, screened and unscreened 60 V and 600 V multi-core sheathed cables Test methods and requirements for
basic and high-performance cables Second Edition
Snowboard Strap Bindings for Soft Boots - Requirements and Test Methods Corrected Version: 5/15/2003
Information Technology - Microprocessor Systems - Hetergeneous InterConnect (HIC) (Low-Cost, Low-latency Scalable Serial
Interconnect for Parallel System Construction) First Edition;IEEE Std 1355
Information technology Synchronous split transfer type system bus (STbus) Logical layer First Edition
ISO
14577-1
ISO
14577-2
ISO
14577-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14577-4
14579
14580
14583
14584
14585
14586
14587
14588
14589
14590
ISO
14592-1
Metallic Materials - Instrumented Indentation Test for Hardness and Materials Parameters - Part 1: Test Methods First Edition
Metallic Materials - Instrumented Indentation Test for Hardness and Materials parameters - Part 2: Verification and Calibration of
Testing Machines First Edition
Metallic Materials - Instrumented Indentation Test for Hardness and Materials Parameters - Part 3: Calibration of Reference Blocks
First Edition
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and nonmetallic coatings First Edition
Hexalobular Socket Head Cap Screws First Edition
Hexalobular Socket Cheese Head Screws First Edition; Corrigendum 1: 10/15/2004
Hexalobular Socket Pan Head Screws First Edition; Corrigendum 1: 10/15/2004
Hexalobular Socket Raised Countersunk Head Screws First Edition
Hexalobular Socket Pan Head Tapping Screws First Edition; Technical Corrigendum 1: 05-15-2004
Hexalobular Socket Countersunk Head Tapping Screws First Edition
Hexalobular Socket Raised Conutersunk (Oval) Head Tapping Screws First Edition
Blind Rivets - Terminology and Definitions Rivets Aveugles - Terminologie Et Definitions First Edition
Blind Rivets - Mechanical Testing First Edition
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability Second Edition
Water quality Evaluation of the aerobic biodegradability of organic compounds at low concentrations Part 1: Shake-flask batch test
with surface water or surface water/sediment suspensions First Edition; Corrected Version 08/01/03
ISO
14592-2
ISO
14593
ISO
14594
ISO
14595
ISO
14596
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14597
14598-1
14598-2
14598-3
14598-4
14598-5
14598-6
14602
ISO
ISO
14606
14607
ISO
ISO
14612
14615
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14616
14617-1
14617-2
14617-3
14617-4
14617-5
14617-6
14617-7
14617-8
14617-9
Water quality Evaluation of the aerobic biodegradability of organic compounds at low concentrations Part 2: Continuous flow river
model with attached biomass First Edition; Corrected Version 08/01/2003
Water Quality - Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium - Method by Analysis of
Inorganic Carbon in Sealed Vessels (CO2 Headspace Test) First Edition
Microbeam analysis Electron probe microanalysis Guidelines for the determination of experimental parameters for wavelength
dispersive spectroscopy First Edition
Microbeam Analysis - Electron Probe Microanalysis - Guidelines for the Specification of Certified Reference Materials (CRMs) First
Edition
Petroleum Products - Determination of Sulfur Content - Wavelength-Dispersive X-Ray Fluorescence Spectrometry Second Edition
Petroleum Products - Determination of Vanadium and Nickel Content - Wavelength-Dispersive X-Ray Fluorescence Spectrometry
First Edition
Information Technology - Software Product Evaluation - Part 1: General Overview First Edition
Software Engineering - Product Evaluation - Part 2: Planning and Management First Edition
Software Engineering - Product Evaluation - Part 3: Process for Developers First Edition
Software Engineering - Product Evaluation - Part 4: Process for Acquirers First Edition
Information Technology - Software Product Evaluation - Part 5: Process for Evaluators First Edition
Software Engineering - Product Evaluation - Part 6: Documentation of Evaluation Modules First Edition
Non-Active Surgical Implants - Implants for Osteosynthesis - Particular Requirements First Edition
Surface Chemical Analysis - Sputter Depth Profiling - Optimization Using Layered Systems as Reference Materials First Edition
Non-active surgical implants ù Mammary implants ù Particular requirements Second Edition
Ships and marine technology Ship s bridge layout and associated equipment Requirements and guidelines for centralized and
integrated bridge functions First Edition
Adhesives - Durability of Structural Adhesive Joints - Exposure to Humidity and Temperature Under Load First Edition
Plastics - Heatshrinkable Films of Polyethylene, Ethylene Copolymers and their Mixtures - Determination of Shrinkage Stress and
Contraction Stress First Edition
Graphical symbols for diagrams Part 1: General information and indexes Second Edition
Graphical Symbols for Diagrams - Part 2: Symbols Having General Application First Edition
Graphical Symbols for Diagrams - Part 3: Connections and Related Devices First Edition
Graphical Symbols for Diagrams - Part 4: Actuators and Related Devices First Edition
Graphical Symbols for Diagrams - Part 5: Measurement and Control Devices First Edition; Corrected Version: 08/01/2003
Graphical Symbols for Diagrams - Part 6: Measurement and Control Functions First Edition
Graphical Symbols for Diagrams - Part 7: Basic Mechanical Components First Edition
Graphical Symbols for Diagrams - Part 8: Valves and Dampers First Edition
Graphical Symbols for Diagrams - Part 9: Pumps, Compressors and Fans First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14617-10
14617-11
14617-12
14617-13
14617-14
14617-15
14619
14620-1
14620-2
14620-3
14621-1
Graphical Symbols for Diagrams - Part 10: Fluid Power Converters First Edition
Graphical Symbols for Diagrams - Part 11: Devices for Heat Transfer and Heat Engines First Edition
Graphical Symbols for Diagrams - Part 12: Devices for Separating, Purification and Mixing First Edition
Graphical symbols for diagrams Part 13: Devices for material processing First Edition
Graphical symbols for diagrams Part 14: Devices for transport and handling of material First Edition
Graphical Symbgols for Diagrams - Part 15: Installation Diagrams and Network Maps First Edition
Space systems Space experiments General requirements First Edition
Space Systems - Safety Requirements - Part 1: System Safety First Edition
Space Systems - Safety Requirements - Part 2: Launch Site Operations First Edition
Space systems Safety requirements Part 3: Flight safety systems First edition
Space systems Electrical, electronic and electromechanical (EEE) parts Part 1: Parts management First Edition
ISO
ISO
ISO
14621-2
14622
14623
Space systems Electrical, electronic and electromechanical (EEE) parts Part 2: Control programme requirements First Edition
Space Systems - Structural Design - Loads and Induced Environment First Edition
Space systems Pressure vessels and pressurized structures Design and operation First Edition
ISO
14624-1
ISO
14624-2
ISO
14624-3
ISO
14624-4
ISO
14624-5
ISO
14624-6
ISO
14624-7
Space systems Safety and compatibility of materials Part 1: Determination of upward flammability of materials First Edition
Space systems Safety and compatibility of materials Part 2: Determination of flammability of electrical-wire insulation and accessory
materials First Edition
Space systems Safety and compatibility of materials Part 3: Determination of offgassed products from materials and assembled
articles First Edition
Space systems Safety and compatibility of materials Part 4: Determination of upward flammability of materials in pressurized
gaseous oxygen or oxygen-enriched environments First Edition
Space systems Safety and compatibility of materials Part 5: Determination of reactivity of system/component materials with
aerospace propellants First Edition
Space systems Safety and compatibility of materials Part 6: Determination of reactivity of processing materials with aerospace fluids
First Edition
Space systems Safety and compatibility of materials Part 7: Determination of permeability and penetration of materials to aerospace
fluids First Edition
ISO
ISO
ISO
ISO
14625
14630
14631
14632
ISO
14635-1
Space Systems - Ground Support Equipment for Use at Launch, Landing, or Retrieval Sites - General Requirements First Edition
Non-active surgical implants - General requirements Second Edition
Extruded Sheets of Impact-Modified Polystyrene (PS-I) - Requirements and Test Methods First Edition
Extruded Sheets of Polyethylene (PE-HD) - Requirements and Test Methods First Edition
Gears - FZG Test Procedures - Part 1: FZG Test Method A/8, 3/90 for Relative Scuffing Load-Carrying Capacity of Oils First Edition
ISO
14635-2
ISO
ISO
14635-3
14637
ISO
14644-1
ISO
ISO
ISO
ISO
14644-2
14644-3
14644-4
14644-5
ISO
14644-6
ISO
ISO
ISO
14644-7
14644-8
14647
ISO
14648-1
ISO
14648-2
ISO
14649-1
ISO
14649-10
ISO
14649-11
ISO
14649-12
ISO
14649-121
Gears FZG test procedures Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
First Edition
Gears FZG test procedures Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of
semifluid gear greases First Edition
Milk Determination of urea content Enzymatic method using difference in pH (Reference method) First Edition
Cleanrooms and Associated Controlled Environments - Part 1: Classification of Air Cleanliness First Edition [Superseded: IEST FEDSTD-209E CANC NOTICE 1]
Cleanrooms and Associated Controlled Environments - Part 2: Specifications for Testing and Monitoring to Prove Continued
Compliance with ISO 14644-1 First Edition [Superseded: IEST FED-STD-209E CANC NOTICE 1]
Cleanrooms and associated controlled environments Part 3: Test methods First Edition
Cleanrooms and Associated Controlled Environments - Part 4: Design, Construction and Start-Up First Edition
Cleanrooms and associated controlled environments Part 5: Operations First Edition
Cleanrooms and associated controlled environments ù Part 6: Vocabulary Salles propres et environnements ma¯ trisÚs apparentÚs ù
Partie 6: Vocabulaire First Edition
Cleanrooms and associated controlled environments Part 7: Separative devices (clean air hoods, gloveboxes, isolators and minienvironments) First Edition
Cleanrooms and associated controlled environments Part 8: Classification of airborne molecular contamination First Edition
Matallic Coatings - Determination of Porosity in Gold Coatings on Metal Substrates - Nitric Acid Vapour Test First Edition
Micrographics - Quality Control of COM Recorders That Generate Images Using a Single Internal Display System - Part 1:
Characteristics of the Software Test Target First Edition
Micrographics - Quality Control of COM Recorders That Generate Images Using a Single Internal Display System - Part 2: Method of
Use First Edition
Industrial Automation Systems and Integration - Physical Device Control - Data Model for Computerized Numerical Controllers - Part
1: Overview and Fundamental Principles First Edition
Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 10:
General process data Second Edition
Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 11:
Process data for milling Second Edition
Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 12:
Process data for turning First Edition
Industrial automation systems and integration Physical device contro Data model for computerized numerical controllers Part 121:
Tools for turning machines First Edition
ISO
14651
Information technology - International string ordering and comparison - Method for comparing character strings and description of the
common template tailorable ordering First Edition; Amendment 1: 8/1/2003; Amendment 2: 10/15/2005; Amendment 3: 10/15/2006
ISO
FDIS 14651
ISO
ISO
ISO
ISO
ISO
14651 FDAM 3
14654
14655
14656
14657
ISO
14660-1
ISO
14660-2
ISO
ISO
14661
14662
ISO
14663-1
ISO
ISO
14663-2
14669
ISO
14673-1
ISO
14673-2
ISO
14673-3
ISO
14674
ISO
14675
ISO
ISO
ISO
ISO
ISO
14676
14678
14679
14680-1
14680-2
Information technology ù International string ordering and comparison ù Method for comparing character strings and description of
the common template tailorable ordering
Information technology International string ordering and comparison Method for comparing character strings and description of the
common template tailorable ordering Amendment 3
Epoxy-Coated Steel for the Reinforcement of Concrete First Edition
Epoxy-Coated Strand for the Prestressing of Concrete First Edition
Epoxy Powder and Sealing Material for the Coating of Steel for the Reinforcement of Concrete First Edition
Zinc-coated steel for the reinforcement of concrete First Edition
Geometrical Product Specifications (GPS) - Geometrical Features - Part 1: General Terms and Definitions Specification Geometrique
Des Produits (GPS) - Elements Geometriques - Partie 1: Termes Generaux Et Definitions First Edition
Geometrical Product Specifications (GPS) - Geometrical Features - Part 2: Extracted Median Line of a Cylinder and a Cone,
Extracted Median Surface, Local Size of an Extracted Feature First Edition
Thermal Turbines for Industrial Applications (Steam Turbines, Gas Expansion Turbines ) - General Requirements First Edition;
Amendment 1:11/01/2002
Information Technology - Open-Edi Reference Model Second Edition
Plastics - Ethylene/Vinyl Alcohol (EVOH) Copolymer Moulding and Extrusion Materials - Part 1: Designation System and Basis for
Specifications First Edition
Plastics - Ethylene/Vinyl Alcohol (EVOH) Copolymer Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and
Determination of Properties First Edition
Water Quality - Determination of Acute Lethal Toxicity to Marine Copepods (Copepoda, Crustacea) First Edition
Milk and milk products Determination of nitrate and nitrite contents Part 1: Method using cadmium reduction and spectrometry
Second Edition; IDF 189-1
Milk and milk products Determination of nitrate and nitrite contents Part 2: Method using segmented flow analysis (Routine method)
Second Edition; IDF 189-2
Milk and milk products Determination of nitrate and nitrite contents Part 3: Method using cadmium reduction and flow injection
analysis with in-line dialysis (Routine method) Second Edition; IDF 189-3
Milk and milk powder Determination of aflatoxin M1 content Clean-up by immunoaffinity chromatography and determination by thinlayer chromatography First edition
Milk and Milk Products - Guidelines for a Standardized Description of Competitive Enzyme Immunoassays - Determination of
Aflatozin M1 Contest First Edition
Adhesives - Evaluation of the Effectiveness of Surface Treatment Techniques for Aluminium - Wet-Peel Test by Floating-Roller
Method First Edition
Adhesives Determination of resistance to flow (sagging) First Edition
Adhesives - Measurement of Adhesion Characteristics by a Three-Point Bending Method First Edition
Paints and Varnishes - Determination of Pigment Content - Part 1: Centrifuge Method First Edition
Paints and Varnishes - Determination of Pigment Content - Part 2: Ashing Method First Edition
ISO
ISO
14680-3
14681
Paints and Varnishes - Determination of Pigment Content - Part 3: Filtration Method First Edition
Diesel Engines - Fuel Injection Pump Testing - Calibrating Fuel Injectors First Edition
ISO
14683
ISO
ISO
14686
14687
ISO
14688-1
Geotechnical Investigation and Testing - Identification and Classification of Soil - Part 1: Identification and Description First Edition
ISO
14688-2
Geotechnical investigation and testing Identification and classification of soil Part 2: Principles for a classification First Edition
ISO
14689-1
ISO
14691
ISO
14692-1
ISO
14692-2 CORR 1
Geotechnical investigation and testing Identification and classification of rock Part 1: Identification and description First Edition
Petroleum and Natural Gas Industries - Flexible Couplings for Mechanical Power Transmission - General Purpose Applications First
Edition
Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 1: Vocabulary, symbols, applications and materials
First Edition
Petroleum and natural gas industries ù Glass-reinforced plastics (GRP) piping ù Part 2: Qualification and manufacture TECHNICAL
CORRIGENDUM 1 First Edition
ISO
14692-2
ISO
ISO
14692-3 CORR 1
14692-3
ISO
14692-4 CORR 1
ISO
ISO
ISO
ISO
14692-4
14693
14694
14695
ISO
14697
ISO
14698-1
Thermal Bridges in Building Construction - Linear Thermal Transmittance - Simplified Methods and Default Values First Edition
Hydrometric determinations Pumping tests for water wells Considerations and guidelines for design, performance and use First
Edition
Hydrogen Fuel - Product Specification First Edition; Technical Corrigendum 1: 04-01-2001
Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 2: Qualification and manufacture First Edition
Petroleum and natural gas industries ù Glass-reinforced plastics (GRP) piping ù Part 3: System design TECHNICAL
CORRIGENDUM 1 First Edition
Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 3: System design First Edition
Petroleum and natural gas industries ù Glass-reinforced plastics (GRP) piping ù Part 4: Fabrication, installation and operation
TECHNICAL CORRIGENDUM 1 First Edition
Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 4: Fabrication, installation and operation First
Edition
Petroleum and natural gas industries Drilling and well-servicing equipment First Edition
Industrial Fans - Specifications for Balance Quality and Vibration Levels First Edition
Industrial fans Method of measurement of fan vibration First Edition
Reaction-to-fire tests ù Guidance on the choice of substrates for building and transport products First Edition [Replaced: ISO TR
14697]
Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods First Edition
ISO
14698-2 CORR 1
ISO
ISO
ISO
14698-2
14699
14700
ISO
14703
ISO
14704
ISO
14705
ISO
ISO
14706
14707
ISO
ISO
14708-1
14708-2
ISO
14709-1
ISO
14709-1 FDAM 1
ISO
14709-2
ISO
ISO
14709-2 FDAM
14710
ISO
ISO
ISO
ISO
ISO
ISO
14711
14713
14714
14715
14716
14717
ISO
14718
Cleanrooms and associated controlled environments ù Biocontamination control ù Part 2: Evaluation and interpretation of
biocontamination data TECHNICAL CORRIGENDUM 1 First Edition
Cleanrooms and associated controlled environments ù Biocontamination control ù Part 2: Evaluation and interpretation of
biocontamination data First Edition
Information Technology - Open Systems Interconnection - Transport Fast Byte Protocol First Edition
Information Technology - Open Systems Interconnection - Network Fast Byte Protocol First Edition
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Sample Preparation for the Determination of Particle Size
Distribution of Ceramic Powders First Edition
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Flexural Strength of Monolithic Ceramics at
Room Temperature First Edition; Corrigendum 1:01/15/2004
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Hardness of Monolithic Ceramics at Room
Temperature First Edition
Surface Chemical Analysis - Determination of Surface Elemental Comtamination on Silicon Wafers by Total-Reflection X-Ray
Fluorescence (TXRF) Spectroscopy First Edition
Surface Chemical Analysis - Glow Discharge Optical Emission Spectrometry (GD-OES) - Introduction to Use First Edition
Implants for Surgery - Active Implantable Medical Devices - Part 1: General Requirements for Safety, Marking and for Information to
be Provided by the Manufacturer First Edition
Implants for surgery Active implantable medical devices Part 2: Cardiac pacemakers First Edition; Replaces ISO 5841-1
Information Technology - Configuration of Customer Premises Cabling (CPC) for Applications - Part 1: Integrated Services Digital
Network (ISDN) Basic Access First Edition; Amendment 1: 08/2004
Information Technology - Configuration of Customer Premises Cabling (CPC) for Applications - Part 1: Integrated Services Digital
Network (ISDN) Basic Access AMENDMENT 1
Information Technology - Configuration of Customer Premises Cabling (CPC) for Applications - Part 2: Integrated Services Digital
Network (ISDN) Primary Rate First Edition
Information Technology - Configuration of customer premises cabling (CPC) for applications - Part 2: ISDN primary access
AMENDMENT 1
Equipment for Crop Protection - Air-Assisted Sprayers - Dimensions of Nozzle Swivel Nuts First Edition
Space Systems - Unmanned Mission Operations Concepts - Guidelines for Defining and Assessing Concept Products First Edition
Protection Against Corrosion of Iron and Steel in Structures - Zinc and Aluminium Coatings - Guidelines First Edition
Essential Oils and Aromatic Extracts - Determination of Residual Benzene Content First Edition
Oil of Thyme Containing Thymol, Spanish Type [Thymus Zygis (Loefl.) L.] First Edition
Oil of Galbanum (Ferula Galbaniflua Boiss. Et Buhse) First Edition
Oil of Origanum, Spanish Type [Thymbra Capitata (L.) Cav.] First Edition
Animal Feeding Stuffs - Determination of Aflatoxin B1 Content of Mixed feeding Stuffs - Method Using High-Performance Liquid
Chromatography First Edition
ISO
ISO
ISO
14721
14722
14723
Space Data and Information Transfer Systems - Open Archival Information System - Reference Model First Edition
Moped and Moped-Rider Kinematics - Vocabulary First Edition
Petroleum and Natural Gas Industries - Pipeline Transportation Systems - Subsea Pipeline Valves First Edition
ISO
14726-1
ISO
ISO
ISO
14726-2
14728-1
14728-2
ISO
14729
ISO
ISO
14730
14731
ISO
ISO
ISO
ISO
14732
14737
14738 CORR 2
14738
ISO
ISO
14740
14743
ISO
14744-1
ISO
14744-2
ISO
14744-3
Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 1: Principles and Acceptance Conditions First Edition
Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 2: Measurement of Accelerating Voltage Characteristics
First Edition
Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 3: Measurement of Beam Current Characteristics First
Edition
ISO
14744-4
Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 4: Measurement of Welding Speed First Edition
ISO
14744-5
Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 5: Measurement of Run-Out Accuracy First Edition
ISO
ISO
ISO
14744-6
14750
14752
Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 6: Measurement of Stability of Spot Position First Edition
Information Technology - Open Distributed Processing - Interface Definition Language First Edition
Information Technology - Open Distributed Processing - Protocol Support for Computational Interactions First Edition
Ships and Marine Technology - Identification Colours for the Content of Piping Systems - Part 1: Main Colours and Media First Edition
Ships and Marine Technology - Identification Colours for the Content of Piping Sytems - Part 2: Additional Colours for Different Media
and/or Functions First Edition; Cancels and Replaces ISO 5571: 1981
Rolling bearings Linear motion rolling bearings Part 1: Dynamic load ratings and rating life First Edition
Rolling bearings Linear motion rolling bearings Part 2: Static load ratings First Edition
Ophthalmic Optics - Contact Lens Care Products - Microbiological Requirements and Test Methods for Products and Regimens for
Hygienic Management of Contact Lenses First Edition
Ophthalmic Optics - Contact Lens Care Products - Antimicrobial Preservative Efficacy Testing and Guidance on Determining Discard
Date First Edition
Welding Coordination - Tasks and Responsibilities Second Edition
Welding Personnel - Approval Testing of Welding Operators for Fusion Welding and of Resistance Weld Setters for Fully
Mechanized and Automatic Welding of Metallic Materials First Edition
Cast Non-Alloy and Low Alloy Steels fo General Applications Fist Edition
Safety of machinery ù Anthropometric requirements for the design of workstations at machinery First Edition
Safety of machinery ù Anthropometric requirements for the design of workstations at machinery First Edition
Forest Machinery - Backpack Power Units for Brush-Cutters, Grass-Trimmers, Pole-Cutters and Similar Appliances - Safety
Requirements and Testing First Edition
Pneumatic fluid power Push-in connectors for thermoplastic tubes First Edition
ISO
ISO
14753
14754
ISO
ISO
14755
14756
ISO
14760
ISO
14763-1
ISO
ISO
ISO
14763-3
14764
14765
ISO
ISO
ISO
14766
14769
14771
ISO
ISO
ISO
ISO
ISO
14772-1
14776-112
14776-113
14776-115
14776-150
ISO
ISO
ISO
ISO
ISO
14776-222
14776-232
14776-321
14776-326
14776-331
Information Technology - Open Distributed Processing - Interface References and Binding First Edition; ITUT-T Rec.X.930 (1998 E)
Information Technology - Pen-Based Interfaces - Common Gestures for Text Editing with Pen-Based Systems First Edition
Information Technology - Input Methods to Enter Characters from the Repertoire of ISO/IEC 10646 with a Keyboard or Other Input
Device First Edition
Information Technology - Measurement and Rating of Performance of Computer-Based Software Systems First Edition
Information Technology - Data Interchange on 90 mm Overwritable and Read Only Optical Disk Cartridges Using Phase Change Capacity: 1,3 Gbytes per Cartridge First Edition
Information Technology - Implementation and Operation of Customer Premises Cabling - Part 1: Administration First Edition;
Amendment 1: 05-2004
Information technology û Implementation and operation of customer premises cabling û Part 3: Testing of optical fibre cabling First
Edition;: 2000 [Replaced: ISO TR 14763-3]
Software Engineering Software Life Cycle Processes Maintenance Second Edition; IEEE Std 14764: 2006
Information Technology - Framework for Protocol Identification and Encapsulation First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Use of OSI Applications Over the
Internet Transmission Control Protocol (TCP) First Edition
Information technology - Open Distributed Processing - Type Repository Function First Edition
Information Technology - Open Distributed Processing - Naming Framework First Edition
Information Technology - Computer Graphics and Image Processing - The Virtual Reality Modeling Language - Part 1: Functional
Specification and UTF-8 Encoding First Edition
Information technology Small computer system interface (SCSI) Part 112: Parallel Interface-2 (SPI-2) First Edition
Information technology . Small computer system interface (SCSI) Part 113: Parallel Interface-3 (SPI-3) First edition
Information technology Small computer system interface (SCSI) Part 115: Parallel Interface-5 (SPI-5) First Edition
Information technology Small computer system interface (SCSI) Part 150: Serial Attached SCSI (SAS) First Edition
Information technology Small computer system interface (SCSI) Part 222: Fibre Channel Protocol for SCSI, Second Version (FCP2)
Information Technology - Small Computer System Interface (SCSI) - Part 232: Serial Bus Protocol 2 (SBP-2) First Edition
Information Technology - Small Computer System Interface-3 (SCSI-3) - Part 321: Block Commands (SBC) First Edition
Information technology Small computer system interface (SCSI) Part 326: Reduced block commands (RBC) First edition
Information Technology Small Computer System Interface (SCSI) Part 331: Stream Commands (SSC)
ISO
ISO
14776-341
14776-342
Information Technology - Small Computer System Interface - 3 (SCSI-3) - Part 341: Controller Commmands (SCC) First Edition
Information Technology - Small Computer System Interface - Part 342:Controller Commands - 2 (SCC- 2 ) First Edition
ISO
14776-351
Information technology û Small computer system interface-3 (SCSI-3) û Part 351: Medium changer commands (SMC) First Edition
ISO
14776-362
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14776-381
14776-411
14776-412
14776-413
14776-452
14782
14788
14790 CORR 1
14790
ISO
ISO
ISO
ISO
14791
14792
14793
14794
ISO
ISO
ISO
ISO
14797
14801
14807
14808
ISO
14813-1
ISO
14814
ISO
14815
ISO
ISO
14816
14817
ISO
14819-1
ISO
14819-2
Information technology û Small computer system interface (SCSI) û Part 362: Multimedia commands-2 (MMC-2) First Edition
Information Technology - Small Computer System Interface (SCSI) - PART 381: Optical Memory Card Device Commands (OMC)
First Edition
Information Technology SCSI-3 Architecture Model (SCSI-3 SAM) First Edition
Information technology û Small computer system interface (SCSI) û Part 412: Architecture model-2 (SAM-2) First Edition
Information technology û Small computer system interface (SCSI) û Part 413: Architecture model-3 (SAM-3) First Edition
Information technology Small computer system interface (SCSI) Part 452: Primary Commands-2 (SPC-2) First Edition
Plastics - Determination of haze for transparent materials First edition; Technical Corrigendum 1: 04/15/2005
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheets Second edition
Snowboard plate-bindings without a release mechanism ù Requirements and test methods TECHNICAL CORRIGENDUM 1
Snowboard plate-bindings without a release mechanism Requirements and test methods Second Edition
Road Vehicles - Heavy Commercial Vehicle Combinations and Articulated Buses - Lateral Stability Test Methods First Edition
Road vehicles Heavy commercial vehicles and buses Steady-state circular tests First Edition
Road Vehicles - Heavy Commercial Vehicles and Buses - Lateral Transient Response Test Methods First Edition
Heavy Commercial Vehicles and Buses - Braking in a Turn - Open-loop Test Methods First Edition
Animal Feeding Stuffs - Determination of Furazolidone Content - Method Using High-Performance Liquid Chromatography First
Edition
Dentistry Fatigue test for endosseous dental implants First Edition
Photography - Transmission and Reflection Densitometers - Method for Determining Performance First Edition
Photography - Composition of 135-Film Canisters First Edition
Intelligent transport systems ù Reference model architecture(s) for the ITS sector ù Part 1: ITS service domains, service groups and
services First Edition [Replaced: ISO TR 14813-1]
Road transport and traffic telematics Automatic vehicle and equipment identification Reference architecture and terminology First
Edition
Road transport and traffic telematics - Automatic vehicle and equipment identification - System specifications First Edition; Replaces
ISO TS 14815:2000
Road transport and traffic telematics Automatic vehicle and equipment identification Numbering and data structure First Edition
Transport information and control systems - Requirements for an ITS/TICS Data Dictionaries First Edition
Traffic and Traveller Information (TTI) - TTI Messages via Traffic Message Coding - Part 1: Coding Protocol for Radio Data System Traffic Message Channel (RDS-TMS) Using ALERT-C First Edition
Traffic and Traveller Information (TTI) - TTI Messages via Traffic Message Coding - Part 2: Event and Information Codes for Radio
Data System - Traffic Message Channel (RDS-TMS) First Edition
ISO
14819-3
ISO
ISO
14819-6
14825
ISO
14827-1
ISO
14827-2
ISO
ISO
ISO
ISO
14828
14829
14833
14834
ISO
14835-1
ISO
ISO
14835-2
14837-1
ISO
14839-1
ISO
14839-2
ISO
14839-3
ISO
14840
ISO
14841
ISO
14842
ISO
14843
Traffic and Travel Information (TTI) TTI messages via traffic message coding Part 3: Location referencing for ALERT-C First Edition;
Supersedes ISO TS 14819-3:2000
Traffic and Traveller Information (TTI) TTI messages via traffic message coding Part 6: Encryption and conditional access for the
Radio Data System Traffic Message Channel ALERT C coding First Edition
Intelligent Transport Systems - Geographic Data Files (GDF) - Overall Data Specification First Edition
Transport Information and control systems Data interfaces between centres for transport information and control systems Part 1:
Message definition requirements First Edition
Transport information and control systems Data interfaces between centres for transport information and control systems Part 2:
DATEX-ASN First Edition
Glass-reinforced thermosetting plastics (GRP) pipes Determination of the long-term specific ring relaxation stiffness under wet
conditions and calculation of the wet relaxation factor First Edition
Frieght Containers - Straddle Carriers for Freight Container Handling - Calculation of Stability First Edition
Information Technology - Data Interchange on 12,7 mm 128-Track Magnetic Tape Cartridges - DLT 3 Format First Edition
Information Technology - Distributed Transaction Processing - the XA Specification First Edition
Mechanical vibration and shock - Cold provocation tests for the assessment of peripheral vascular function - Part 1: Measurement
and evaluation of finger skin temperature First Edition
Mechanical vibration and shock - Cold provocation tests for the assessment of peripheral vascular function - Part 2: Measurement
and evaluation of finger systolic blood pressure First Edition
Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 1: General guidance First Edition
Mechanical Vibration - Vibration of Rotating Machinery Equipped with Active Magnectic Bearings - Part 1: Vocabulary Vibrations
Mecaniques - Vibrations de Machines Rotatives Equipees de Paliers Magnetiques Actifs - Partie 1: Vocabulaire First Edition
Mechanical vibration Vibration of rotating machinery equipped with active magnetic bearings Part 2: Evaluation of vibration First
Edition
Mechanical vibration Vibration of rotating machinery equipped with active magnetic bearings Part 3: Evaluation of stability margin
First Edition
Information Technology - 12,65 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - Data-D3-1
Format First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Offer Supplementary Service First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Do Not Disturb and Do Not Disturb Override Supplementary Services First
Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Offer Supplementary Service Second Edition
ISO
14844
ISO
14845
ISO
ISO
ISO
14846
14847
14848
ISO
14849
ISO
14850-1
ISO
14851
ISO
14852
ISO
14853
ISO
14855-2
ISO
ISO
ISO
ISO
14855-1
14856
14863
14864
ISO
14865
ISO
14869-1
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Do Not Disturb and Do Not Disturb Override Supplementary Services Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Intrusion Supplementary Service First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Intrusion Supplementary Service Second Edition
Rotary Positive Displacement Pumps - Technical Requirements First Edition
Plastics - Unsaturated-Polyester Resins - Determination of Reactivity at 130 Degrees Celsius First Edition
Plastics Phenol-Formaldehyde Mouldimgs - Determination of Free Ammonia and Ammonium Compounds - Indophenol Method First
Edition
Nuclear energy Waste-packages activity measurement Part 1: High-resolution gamma spectrometry in integral mode with open
geometry First Edition
Determination of the ultimate aerobic biodegradibility of plastic materials in an aqueous medium - Method by measuring the oxygen
demand in a closed respirometer First edition; Technical Corrigendum 1: 05/2005
Determination of the ultimate aerobic biodegradibility of plastic materials in an aqueous medium - Method by analysis of evolved
carbon dioxide First edition; Technical Corrigendum 1: 05/2005
Plastics Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system Method by measurement
of biogas production First Edition
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions ù Method by
analysis of evolved carbon dioxide ù Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test First
Edition
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by
analysis of evolved carbon dioxide - Part 1: General method First Edition; Replaces ISO 14855:1999
Timekeeping Instruments - Wristwatch-Cases - Fixing Dimensions of Non-Spring-Bar Types First Edition
Information Technology - System-Independent Data Format (SIDF) First Edition
Rice - Evaluation of Gelatinization Time of Kernels During Cooking First Edition
Machinery for Forestry - Portable Hand-Held Brush-Cutters and Grass-Trimmers with Backpack-Mounted Combustion-Engine Power
Source - Safety Requirements and Testing First Edition
Soil Quality - Dissolution for the Determination of Total Element Content - Part 1: Dissolution with Hydrofluoric and Perchloric Acids
First Edition
ISO
ISO
ISO
14869-2
14870
14877
Soil Quality - Dissolution for the Determination of Total Element Content - Part 2: Dissolution by Alkaline Fusion First Edition
Soil Quality - Extraction of Trace Elements by Buffered DTPA Solution First Edition
Protective Clothing for Abrasive Blasting Operations Using Granular Abrasives First Edition
ISO
14879-1
ISO
ISO
14880-1
14880-2
ISO
ISO
ISO
ISO
ISO
14880-3
14880-4
14881
14882
14887
ISO
14888-1
ISO
14888-2
ISO
14888-3 CORR 1
ISO
ISO
14888-3
14889
ISO
ISO
14890 CORR 1
14890
ISO
14891
ISO
ISO
14892
14895
ISO
ISO
ISO
ISO
ISO
14896 AMD 1
14896
14897
14898
14899
ISO
14900
Implants for Surgery - Total Knee-Joint Prostheses Part 1: Determination of Endurance Properties of Knee Tibial Trays First Edition
Optics and photonics - Microlens arrays - Part 1: Vocabulary Optique et photonique RÚseaux de microlentilles Partie 1: Vocabulaire
First Edition; Corrigendum 1, 8/1/2003; Corrigendum 2, 8/1/2005
Optics and photonics Microlens arrays Part 2: Test methods for wavefront aberrations First Edition
Optics and photonics Microlens arrays Part 3: Test methods for optical properties other than wavefront aberrations First Edition
Optics and photonics Microlens arrays Part 4: Test methods for geometrical properties First Edition
Integrated Optics - Interfaces - Parameters Relevent to Coupling Properties First Edition
Programming Languages - C++ Second Edition
Sample Preparation - Dispersing Procedures for Powders in Liquids First Edition
Information Technology - Security Techniques - Digital Signatures with Appendix - Part 1: General First Edition; Corrected and
Reprinted 12/15/1999
Information Technology - Security Techniques - Digital Signatures with Appendix - Part 2: Identity-Based Mechanisms First Edition
Information technology ù Security techniques ù Digital signatures with appendix ù Part 3: Discrete logarithm based mechanisms
TECHNICAL CORRIGENDUM 1 Second Edition
Information technology Security techniques Digital signatures with appendix Part 3: Discrete logarithm based mechanisms Second
Edition
Ophthalmic Optics - Spectacle Lenses - Fundamental Requirements for Uncut Finished Lenses Second Edition
Information technology ù Multimedia content description interface ù Part 5: Multimedia description schemes TECHNICAL
CORRIGENDUM 1 First Edition
Conveyor belts Specification for rubber or plastics covered conveyor belts of textile construction for general use First Edition
Milk and Milk Products - Determination of Nitrogen Content - Routine Method Using Combustion According to the Dumas Principle
First Edition; IDF 185
Dried Skimmed Milk - Determination of Vitamin D Content Using Hih-Performance Liquid Chromatography First Edition; IDF 177
Small Craft - Liquid-Fuelled Galley Stoves First Edition
Plastics - Polyurethane raw materials - Determination of isocyanate content AMENDMENT 1: Acceptable variations in the procedure
for method B Second Edition
Plastics Polyurethane raw materials Determination of isocyanate content Second Edition
Plastics - Polyols for Use in the Production of Polyurethane - Determination of Water Content Second Edition
Plastics - Aromatic Isocyanates for Use in the Production of Polyurethane - Determination of Acidity First Edition
Plastics - Polyols for Use in the Production of Polyurethane - Determination of Basicity First Edition
Plastics - Polyols for use in the production of polyurethane - Determination of hydroxyl number First Edition; Corrigendum 1:9/15/2005
ISO
14902
Animal Feeding Stuffs - Determination of Trypsin Inhibitor Activity of Soya Products First Edition
Road transport and traffic telematics Electronic fee collection Application interface definition for dedicated short-range
communication First Edition; Replaces ISO TR 14906: 12/15/1998
Plastics - Thermoplastic Polyester/Ester and Polyether/Ester Elastomers for Moulding and Extrusion - Part 1: Designation System and
Basis for Specifications First Edition
Plastics - Thermoplastic Polyester/Ester and Polyether/Ester Elastomers for Moulding and Extrusion - Part 2: Preparation of Test
Specimens and Determination of Properties First Edition
Water Quality - Determination of Dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ Using Ion Chromatography Method for Water and Waste Water First Edition
Gas analysis ù Conversion of gas mixture composition data TECHNICAL CORRIGENDUM 1 First Edition
Gas Analysis - Conversion of Gas Mixture Composition Data First Edition
Software ergonomics for multimedia user interfaces Part 1: Design principles and framework First Edition
Software ergonomics for multimedia user interfaces Part 2: Multimedia navigation and control First Edition
Software Ergonomics for Multimedia User Interfaces - Part 3: Media Selection and Combination First Edition
Thermal Spraying - Determination of Tensile Adhesive Strength First Edition
Thermal Spraying - Terminology, Classification First Edition
Thermal Spraying - Approval Testing of Thermal Sprayers First Edition
ISO
14906
ISO
14910-1
ISO
14910-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14911
14912 CORR 1
14912
14915-1
14915-2
14915-3
14916
14917
14918
ISO
ISO
ISO
14919
14920
14921
Thermal Spraying - Wire, Rods and Cords for Flame and Arc Spraying - Classification - Technical Supply Conditions First Edition
Thermal Spraying - Spraying and Fusing of Self-Fluxing Alloys First Edition
Thermal Spraying - Procedures for the Application of Thermally Sprayed Coatings for Engineering Components First Edition
ISO
14922-1
ISO
14922-2
Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 1: Guidance for Selection and Use First Edition
Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 2: Comprehensive Quality Requirements First
Edition
ISO
14922-3
Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 3: Standard Quality Requirements16 First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14922-4
14923
14924
14931
14934-2
14934-3
14935
Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 4: Elementary Quality Requirements First Edition
Thermal spraying Characterization and testing of thermally sprayed coatings First Edition
Thermal spraying Post-treatment and finishing of thermally sprayed coatings First Edition
Leather Guide to the selection of leather for apparel (excluding furs) First Edition
Fire Tests Calibration and Use of Heat Flux Meters Part 2: Primary Calibration Methods First Edition
Fire tests Calibration and use of heat flux meters Part 3: Secondary calibration method First Edition
Petroleum and Related Products - Determination of Wick Flame Persistence of Fire-Resistant Fluids First Edition
ISO
14937
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14939
14943
14945
14946
14949
14950
14951-1
14951-2
14951-3
14951-4
14951-5
14951-6
14951-7
14951-8
14951-9
14951-10
14951-11
14951-12
14951-13
14952-1
14952-2
ISO
ISO
ISO
ISO
14952-3
14952-4
14952-5
14952-6
ISO
ISO
14953
14954
ISO
ISO
14956
14957
Sterilization of Health Care Products - General Requirements for Characterization of a Sterilizing Agent and the Development,
Validation and Routine Control of a Sterilization Process for Medical Devices First Edition; Technical Corrigendum 1: 6/01/2003
Animal feeding stuffs Determination of carbadox content Method using highperformance liquid chromatography First Edition
Nuclear fuel technology Administrative criteria related to nuclear criticality safety First Edition
Small craft Builder s plate First Edition
Small Craft - Maximum Load Capacity First Edition
Implants for Surgery - Two-Part Addition-Cure Silicone Elastomers First Edition
Space systems Unmanned spacecraft operability First Edition
Space Systems - Fluid Characteristics - Part 1: Oxygen First Edition
Space Systems - Fluid Characteristics - Part 2: Hydrogen Propellant First Edition
Space Systems - Fluid Characteristics - Part 3: Nitrogen First Edition; Technical Corrigendum 1 09/01/2000
Space Systems - Fluid Characteristics - Part 4: Helium First Edition; Corrigendum 1: 06/01/2000
Space Systems - Fluid Characteristics - Part 5: Nitrogen Tetroxide Propellant First Edition
Space Systems - Fluid Characteristics - Part 6: Monomethylhydrazine Propellant First Edition
Space Systems - Fluid Characteristics - Part 7: Hydrazine Propellant First Edition
Space Systems - Fluid Characteristics - Part 8: Kerosene Propellant First Edition
Space Systems - Fluid Characteristics - Part 9: Argon First Edition; Corrigendum 1: 4/15/2000
Space Systems - Fluid Characteristics - Part 10: Water First Edition; Corrected and Reprinted 2000-06-01
Space Systems - Fluid Characteristics - Part 11: Ammonia First Edition
Space Systems - Fluid Characteristics - Part 12: Carbon Dioxide First Edition
Space Systems - Fluid Characteristics - Part 13: Breathing Air First Edition
Space systems Surface cleanliness of fluid systems Part 1: Vocabulary First Edition
Space systems Surface cleanliness of fluid systems Part 2: Cleanliness levels First Edition
Space systems Surface cleanliness of fluid systems Part 3: Analytical procedures for the determination of nonvolatile residues and
particulate contamination First Edition
Space systems Surface cleanliness of fluid systems Part 4: Rough-cleaning processes First Edition
Space systems Surface cleanliness of fluid systems Part 5: Drying processes First Edition
Space systems Surface cleanliness of fluid systems Part 6: Precision-cleaning processes First Edition
Space Systems - Structural Design - Determination of Loading Levels for Static Qualification Testing of Launch Vehicles First Edition
Space systems Dynamic and static analysis Exchange of mathematical models First Edition
Air Quality - Evaluation of the Suitability of a Measurement Pr4ocedure by Comparison with a Required Measurement Uncertainty
First Edition
Information Technology - Notation of Format for Data Element Values First Edition
ISO
ISO
ISO
ISO
14960
14961
14962
14963
ISO
14964
ISO
14965
ISO
14966 CORR 1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
14966
14968
14971
14972
14975
14976
14977
14978
ISO
ISO
14981
14982
ISO
ISO
14993
14997
ISO
ISO
ISO
ISO
14999-4
15001
15002
15003
ISO
15004-1
ISO
15004-2
ISO
15005
Tubeless tyres Valves and components Test methods First Edition
Space Data and Information Transfer Systems - Parameter Value Language Specification Second Edition
Space Data and Information Transfer Systems - ASCII Encoded English First Edition
Mechanical vibration and shock Guidelines for dynamic tests and investigations on bridges and viaducts First Edition
Mechanical Vibration and Shock - Vibration of Stationary Structures - Specific Requirements for Quality Management in
Measurement and Evaluation of Vibration First Edition
Air Quality - Determination of Total Non-Methane Organic Compounds - Cryogenic Preconcentration and Direct Flame Ionization
Detection Method First Edition
Ambient air ù Determination of numerical concentration of inorganic fibrous particles ù Scanning electron microscopy method ù
TECHNICAL CORRIGENDUM 1 First Edition
Ambient Air - Determination of Numerical Concentration of Inorganic Fibrous Particles - Scanning Electron Microscopy Method First
Edition
Paper and Board - Cut-Size Office Paper - Measurement of Curl in a Pack of Sheets First Edition
Medical devices ù Application of risk management to medical devices Second edition
Sterile Obturators for Single Use with Overneedle Peripheral Intravascular Catheters First Edition
Surface Chemical Analysis - Information Formats First Edition
Surface Chemical Analysis - Data Transfer Format First Edition; Corrected and Reprinted 03/15/1999
Information Technology - Syntactic Metalanguage - Extended BNF First Edition
Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment First Edition
Graphic Technology - Process Control - Optical, Geometrical and Metrological Requirements for Reflection Densitometers for
Graphic Arts Use First Edition
Agricultural and Forestry Machinery - Electromagnetic Compatibility - Test Methods and Acceptance Criteria First Edition
Corrosion of Metals and Alloys - Accelerated Testing Involving Cyclic Exposure to Salt Mist,Dry" and"Wet" Conditions First Edition"
Optics and optical instruments Test methods for surface imperfections of optical elements First Edition
Optics and photonics ù Interferometric measurement of optical elements and optical systems ù Part 4: Interpretation and evaluation
of tolerances specified in ISO 10110 First Edition
Anaesthetic and respiratory equipment - Compatibility with oxygen First Edition
Flow-Metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems First Edition
Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions First Edition
Ophthalmic instruments Fundamental requirements and test methods Part 1: General requirements applicable to all ophthalmic
instruments First Edition; Together with ISO 15004-2 cancels and replaces ISO 15004:1997,
Ophthalmic instruments ù Fundamental requirements and test methods ù Part 2: Light hazard protection First Edition [Superseded:
ISO 15004]
Road Vehicles - Ergonomic Aspects of Transport Information and Control Systems - Dialogue Management Principles and
Compliance Procedures First Edition
ISO
15006
ISO
15007-1
ISO
15008
ISO
ISO
15009
15010
ISO
15011-1
ISO
15011-2
ISO
15011-3
ISO
15011-4
ISO
ISO
15012-1
15013
ISO
ISO
15016
15018
ISO
15022-1
ISO
ISO
ISO
15022-2
15023-1
15023-2
ISO
ISO
ISO
ISO
ISO
15024
15025
15026
15027-1
15027-2
Road vehicles Ergonomic aspects of transport information and control systems Specifications and compliance procedures for invehicle auditory presentation First Edition
Road Vehicles - Measurement of Driver Visual Behaviour with Respect to Transport Information and Control Systems - Part 1:
Definitions and Parameters First Edition
Road Vehicles - Ergonomic Aspects of Transport Information and Control Systems - Specifications and Compliance Procedures for InVehicle Visual Presentation First Edition
Soil Quality - Gas Chromatographic Determination of the Content of Volatile Aromatic Hydrocarbons, Naphthalene and Volatile
Halogenated Hydrocarbons - Purge-and Trap Method with Thermal Desorption First Edition
Disposable Hanging Devices for Transfusion and Infusion Bottles - Requirements and Test Methods First Edition
Health and Safety in Welding and Allied Processes - Laboratory Method for Sampling Fume and Gases Generated by Arc Welding
Part 1: Determination of Emission Rate and Sampling for Analysis of Particulate Fume First Edition
Health and safety in welding and allied processes Laboratory method for sampling fume and gases generated by arc welding Part 2:
Determination of emission rates of gases, except ozone First Edition
Health and safety in welding and allied processes Laboratory method for sampling fume and gases generated by arc welding Part 3:
Determination of ozone concentration using fixed point measurements First Edition
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets First
Edition
Health and safety in welding and allied processes Requirements testing and marking of equipment for air filtration Part 1: Testing of
the separation efficiency for welding fume First Edition
Extruded Sheets of Polypropylene (PP) - Requirements and Test Methods First Edition
Ships and Marine Technology - Guidelines for the Assessment of Speed and Power Performance by Analysis of Speed Trial Data
First Edition
Information technology Generic cabling for homes First Edition
Securities - Scheme for Messages (Data Field Dictionary) - Part 1: Data Field and Message Design Rules and Guidelines First
Edition; Technical Corrigendum 1: 12-15-1999; Cancels and Replaces ISO TR 7775: 1997 and ISO 11521: 1996
Securities - Scheme for Messages (Data Field Dictionary) - Part 2: Maintenance of the Data Field Dictionary and Catalogue of
Messages First Edition; Technical Corrigendum 1: 12-15-1999; Cancels and Replaces ISO TR 7775: 1997 and ISO 11521: 1996
Plastics - Poly (vinyl alcohol) (PVAL) Materials - Part 1: Designation System and Basis for Specifications First Edition
Plastics - Poly(Vinyl Alcohol) (PVAL) Materials - Part 2: Determination of Properties First Edition
Fibre-Reinforced Plastic Composites - Determination of Mode I Interlaminar Fracture Toughness, GIC, for Unidirectionally Reinforced
Materials First Edition
Protective Clothing - Protection Against Heat and Flame - Method of Test for Limited Flame Spread First Edition
Information Technology - System and Software Integrity Levels First Edition
Immersion Suits - Part 1: Constant Wear Suits, Requirments Including Safety First Edition
Immersion Suits - Part 2: Abandonment Suits, Requirements Including Safety First Edition
ISO
15027-3
ISO
15028
ISO
15029-1
ISO
15031-1
ISO
15031-3
ISO
15031-4
ISO
15031-5
ISO
15031-6
ISO
ISO
ISO
ISO
ISO
ISO
15031-7
15032
15033
15034
15037-1
15037-2
ISO
ISO
ISO
15038
15039
15040
ISO
ISO
15041
15045-1
ISO
15049
ISO
15050
ISO
15051
Immersion Suits - Part 3: Test Methods First Edition
Plastics Aromatic isocyanates for use in the production of polyurethanes Determination of hydrolysable chlorine First Edition
Petroleum and Related Products - Determination of Spray Ignition Characteristics of Fire-Resistant Fluids - Part 1: Spray Flame
Persistence - Hollow-Cone Nozzle Method First Edition
Road Vehicles - Communication between Vehicle and External Equipment for Emissions-Related Diagnostics - Part 1: General
Information First Edition
Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 3: Diagnostic
connector and related electrical circuits, specification and use First Edition
Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 4: External test
equipment First Edition
Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 5: Emissions-related
diagnostic services First Edition
Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic
trouble code definitions First Edition
Road Vehicles - Communication between Vehicle and External Equipment for Emissions-Related Diagnostics - Part 7: Data Link
Security First Edition
Prostheses - Structural Testing of Hip Units First Edition
Plastics ù Determination of caprolactam and its cyclic and linear oligomers by HPLC Second Edition
Composites - Prepregs - Determination of Resin Flow First Edition
Road vehicles Vehicle dynamics test methods Part 1: General conditions for passenger cars Second Edition
Road vehicles Vehicle dynamics test methods Part 2: General conditions for heavy vehicles and buses First Edition
Plastics - Organic-Perester Crosslinking Agents for Unsaturated-Polyester Thermosetting Materials - Determination of Active-Oxygen
Content First Edition
Textile-glass rovings Determination of solubility of size First Edition
Composites - Prepregs - Determination of Gel Time First Edition
Information Technology - Data Interchange on 90 mm Optical Disk Cartridges - Capacity: 640 Mbytes per Cartridge First Edition
Information technology Home electronic system (HES) gateway Part 1: A residential gateway model for HES First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Advice of Charge Supplementary Services First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Advice of Charge Supplementary Services Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Recall Supplementary Service Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Recall Supplementary Service Second Edition
ISO
15052
ISO
15053
ISO
15054
ISO
15055
ISO
ISO
15056
15061
ISO
15063
ISO
ISO
ISO
15064
15065
15071
ISO
15072
Plastics Polyols for use in the production of polyurethanes Determination of hydroxyl number by NIR spectroscopy First edition
Plastics Aromatic isocyanates for use in the production of polyurethanes Determination of the isomer ratio in toluenediisocyanate
First Edition
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 First Edition
Hexagonal Bolts with Flange - Small Series - Product Grade A First Edition; Technical Corrigendum 1: 12/15/2006
Hexagon Bolts with Flange with Metric Fine Pitch Thread - Small Series - Product Grade A First Edition; Technical Corrigendum 1;
12/15/2006
ISO
15075
Transport information and control systems In-vehicle navigation systems Communications message set requirements First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15076-1
15078
15080
15081
15082
15083
15084
15085
ISO
15086-1
ISO
ISO
15086-2
15087-1
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Interception Additional Network Feature Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Interception Additional Network Feature Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Transit Counter Additional Network Feature First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Transit Counter Additional Network Feature First Edition
Water Quality - Determination of Dissolved Bromate - Method by Liquid Chromatography of Ions First Edition
Image technology colour management - Architecture, profile format and data structure - Part 1: Based on ICC.1:2004-10 First Edition
Machinery for Forestry - Log Loaders - Location and Method of Operation of Two-Lever Operator Controls First Edition
Nuclear Facilities - Ventilation Penetrations for Shielded Enclosures First Edition
Agricultural irrigation equipment Graphical symbols for pressurized irrigation systems First Edition
Road Vehicles - Tests for Rigid Plastic Safety Glazing Materials First Edition
Small Craft - Bilge-Pumping Systems First Edition
Small Craft - Anchoring, Mooring and Towing - Strong Points First Edition
Small craft Man-overboard prevention and recovery First Edition
Hydraulic Fluid Power - Determination of Fluid-Borne Noise Characteristics of Components and Systems - Part 1: Introduction First
Edition
Hydraulic Fluid Power - Determination of Fluid-Borne Noise Characteristics of Components and Systems - Part 2: Measurement of
Speed of Sound in a Fluid in a Pipe First Edition
Dental Elevators - Part 1: General Requirements First Edition
ISO
ISO
ISO
ISO
ISO
15087-2
15087-3
15087-4
15087-5
15087-6
Dental Elevators - Part 2: Warwick James Elevators First Edition
Dental Elevators - Part 3: Cryer Elevators First Edition
Dental Elevators - Part 4: Coupland Elevators First Edition
Dental Elevators - Part 5: Bein Elevators First Edition
Dental Elevators - Part 6: Flohr Elevators First Edition
ISO
ISO
ISO
ISO
ISO
ISO
15089
15098-1
15098-2
15098-3
15099
15100
ISO
15103-1
ISO
ISO
ISO
15103-2
15105-1
15105-2
ISO
15106-1
ISO
15106-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15106-3
15107
15108
15109
15113
15117-1
15119
ISO
15136-1
Water Quality - Guidelines for Selctive Immunoassays for the Determination of Plant Treatment and Pesticide Agents First Edition
Dental Tweezers - Part 1: General Requirements First Edition
Dental Tweezers - Part 2: Meriam Types First Edition
Dental Tweezers - Part 3: College Types First Edition
Thermal Performance of Windows, Doors and Shading Devices - Detailed Calculations First Edition
Plastics - Reinforcement Fibres - Chopped Strands - Determination of Bulk Density First Edition
Plastics - Poloy(Phenylene Ether) (PPE) Mouldings and Extrusion Materials - Part 1: Designation System and Basis for Specifications
First Edition
Plastics ù Poly(phenylene ether) (PPE) moulding and extrusion materials ù Part 2: Preparation of test specimens and determination
of properties Second Edition
Plastics - Film and Sheeting - Determination of Gas-Transmission Rate - Part 1: Differential-Pressure Method First Edition
Plastics Film and sheeting Determination of gas-transmission rate Part 2: Equal-pressure method First Edition
Plastics - Film and Sheeting - Determination of Water Vapour Transmission Rate - Part 1: Humidity Detection Sensor Method First
Edition
Plastics - Film and Sheeting - Determination of Water Vapour Transmission Rate - Part 2: Infrared Detection Sensor Method First
Edition
Plastics - Film and Sheeting - Determination of Water Vapour Transmission Rate - Part 3: Electrolytic Detection Sensor Method First
Edition
Adhesives - Determination of Cleavage Strength of Bonded Joints First Edition
Adhesives - Determination of Strength of Bonded Joints Using a Bending-Shear Method First Edition
Adhesives - Determination of the Time to Rupture of Bonded Joints under Static Load First Edition
Rubber - Determination of Frictional Properties Second Edition
Coal flow properties Part 1: Bin flow First Edition
Packaging - Sacks - Determination of the Friction of Filled Sacks First Edition
Downhole Equipment for Petroleum and Natural Gas Industries - Progressing Cavity Pump Systems for Artificial Lift - Part 1: Pumps
First Edition
ISO
ISO
15136-2
15137
Petroleum and natural gas industries Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems First Edition
Self-adhesive hanging devices for infusion bottles and injection vials Requirements and test methods First Edition
ISO
ISO
15138
FDIS 15138
ISO
15141-1
ISO
ISO
ISO
15141-2
15142-1
15142-2
ISO
ISO
ISO
15142-3
15145
15147
ISO
ISO
ISO
ISO
15148
15152
15153
15154
ISO
15156-1
ISO
15156-2 CORR 1
ISO
15156-2
ISO
15156-3 CORR 2
ISO
15156-3 CORR 1
ISO
ISO
ISO
ISO
15156-3
15165
15166-1
15166-2
ISO
15167
Petroleum and Natural Gas Industries - Offshore Production Installations - Heating, Ventilation and Air-Conditioning First Edition;
Technical Corrigendum 1:06-15-2001
Petroleum and natural gas industries ù Offshore production installations ù Heating, ventilation and air-conditioning
Foodstuffs - Determination of Ochratoxin A in Cereals and Cereal Products - Part 1: High Performance Liquid Chromatographic
Method with Silica Gel Clean Up First Edition
Foodstuffs - Determination of Ochratoxin A in Cereals and Cereal Products - Part 2: High Performance Liquid Chromatographic
Method with Bicarbonate Clean Up First Edition
Implants for surgery Metal intramedullary nailing systems Part 1: Intramedullary nails First Edition
Implants for surgery Metal intramedullary nailing systems Part 2: Locking components First Edition
Implants for surgery Metal intramedullary nailing systems Part 3: Connection devices and reamer diameter measurements First
Edition
Information Technology - Programming Languages - Forth First Edition
Light Conveyor Belts - Tolerances on Widths and Lengths of Cut Light Conveyor Belts First Edition
Hygrothermal Perfor4mance of Building Materials and Products - Determination of Water Absorption Coefficient by Partial Immersion
First Edition
Tobacco - Determination of the Content of Total Alkaloids as Nicotine - Continuous-Flow Analysis Method First Edition
Tobacco - Determination of the Content of Reducing Substances - Continuous-Flow Analysis Method First Edition
Tobacco - Determination of the Content of Reducing Carbohydrates - Continuous-Flow Analysis Method First Edition
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General
principles for selection of cracking-resistant materials First Edition; Corrigendum 1: 09/01/2005
Petroleum and natural gas industries ù Materials for use in H2S-containing environments in oil and gas production ù Part 2: Crackingresistant carbon and low alloy steels, and the use of cast irons TECHNICAL CORRIGENDUM 1 First Edition
Petroleum and natural gas industries ù Materials for use in H2S-containing environments in oil and gas production ù Part 2: Crackingresistant carbon and low alloy steels, and the use of cast irons First Edition
Petroleum and natural gas industries ù Materials for use in H2S-containing environments in oil and gas production ù Part 3: Crackingresistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CORRIGENDUM 2 First Edition
Petroleum and natural gas industries ù Materials for use in H2S-containing environments in oil and gas production ù Part 3: Crackingresistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CORRIGENDUM 1 First Edition
Petroleum and natural gas industries ù Materials for use in H2S-containing environments in oil and gas production ù Part 3: Crackingresistant CRAs (corrosion-resistant alloys) and other alloys First Edition
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Classification System First Edition
Adhesives - Methods of Preparing Bulk Specimens - Part 1: Two-Part Systems First Edition
Adhesives - Methods of Preparing Bulk Specimens - Part 2: Elevated-Temperature-Curing One-Part Systems First Edition
Petroleum Products - Determination of Particulate Content of Middle Distillate Fuels - Laboratory Filtration Method First Edition
ISO
15169
ISO
ISO
15170-1
15170-2
ISO
15171-1
ISO
ISO
ISO
ISO
ISO
ISO
15171-2
15172
15174
15175
15176
15178
ISO
15181-1
ISO
15181-2
ISO
ISO
15181-3
15184
ISO
15186-1
ISO
15186-2
ISO
ISO
ISO
ISO
15186-3
15188
15189
15190
ISO
15193
ISO
ISO
15194
15195
Petroleum and liquid petroleum products Determination of volume, density and mass of the hydrocarbon content of vertical
cylindrical tanks by hybrid tank measurement systems First Edition
Road Vehicles - Four-Pole Electrical Connectors with Pins and Twist Lock - Part 1: Dimensions and Classes of Application First
Edition
Road Vehicles - Four-Pole Electrical Connectors with Pins and Twist Lock - Part 2: Tests and Requirements First Edition
Connections for Fluid Power and General Use - Hydraulic Couplings for Diagnostic Purposes - Part 1: Coupling Not for Connection
Under Pressure First Edition
Connections for Fluid Power and General Use - Hydraulic Couplings for Diagnostic Purposes - Part 2: Coupling with M16 x 2 End for
Connection under Pressure First Edition
Road vehicles Wheels Nut seat strength tests First Edition
Milk and Milk Products - Microbial Coagulants - Determination of Total Milk-Clotting Activity First Edition
Soil quality Characterization of soil related to groundwater protection First Edition
Soil Quality - Characterization of Excavated Soil and Other Soil Materials Intended for Re-use First Edition
Soil Quality - Determination of Total Sulfur by Dry Combustion First Edition
Paints and varnishes ù Determination of release rate of biocides from antifouling paints ù Part 1: General method for extraction of
biocides Second Edition
Paints and Varnishes - Determination of Release Rate of Biocides from Antifouling Paints - Part 2: Determination of Copper-Ion
Concentration in the Extract and Calculation of the Release Rate Second Edition
Paints and varnishes ù Determination of release rate of biocides from antifouling paints ù Part 3: Calculation of the zinc ethylenebis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract First Edition
Paints and Varnishes - Determination of Film Hardness by Pencil Test First Edition
Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements Using Sound Intensity - Part 1: Laboratory
Measurements First Edition
Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 2: Field measurements
First Edition
Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 3: Laboratory
measurements at low frequencies First Edition
Project Management Guidelines for Terminology Standardization First Edition
Medical laboratories ù Particular requirements for quality and competence Second edition
Medical laboratories Requirements for safety First Edition
In Vitro Diagnostic Medical Devices - Measurement of Quantities in Samples of Biological Origin - Presentation of Reference
Measurement Procedures First Edition
In Vitro Diagnostic Medical Devices - Measurement of Quantities in Samples of Biological Origin - Description of Reference Materials
First Edition
Laboratory medicine Requirements for reference measurement laboratories First Edition
ISO
15197
ISO
ISO
ISO
15198
15200
15201
ISO
15202-1
ISO
15202-2
ISO
ISO
ISO
ISO
15202-3
15205
15212-1
15212-2
ISO
15213
ISO
15214
ISO
ISO
ISO
15217
15218
15219
ISO
15223
ISO
15223-1
ISO
ISO
ISO
ISO
ISO
15225
15226
15227
15228
15230
ISO
15234
In Vitro Diagnostic Test Systems - Requirements for Blood-Glucose Monitoring Systems for Self-Testing in Managing Diabetes
Mellitus First Edition
Clinical laboratory medicine In vitro diagnostic medical devices Validation of user quality control procedures by the manufacturer
First Edition
Information Technology - Adaptive Lossless Data Compression Algorithm (ALDC) First Edition
Zinc and zinc alloys Castings Specifications First Edition
Workplace Air - Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic
Emission Spectrometry - Part 1: Sampling First Edition
Workplace Air - Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic
Emission Spectrometry - Part 2: Sample Preparation First Edition
Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission
spectrometry Part 3: Analysis First Edition
SBus - Chip and Module Interconnect Bus First Edition; IEEE Std 1496
Oscillation-Type Density Meters - Part 1: Laboratory Instruments First Edition
Oscillation-Type Density Meters - Part 2: Process Instruments for Homogeneous Liquids First Edition
Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of sulfite-reducing bacteria growing under
anaerobic conditions First Edition
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Mesophilic Lactic Acid Bacteria - ColonyCount Technique at 30 Degrees Celsius First Edition
Fluid Power Systems and Components - 16 mm Square Electrical Connector with Earth Contact - Characteristics and Requirements
First Edition
Pneumatic Fluid Power - 3/2 Solenoid Valves - Mounting Interface Surfaces First Edition
Earth-moving machinery Cable excavators Terminology and commercial specifications First Edition
Medical devices Symbols to be used with medical device labels, labelling and information to be supplied First Edition: Amendment 1:
8/01/2002; Amendment 2: 02/15/2004; Partially superseded by ISO 15223-1 [Superseded By: ISO 15223-1]
Medical devices ù Symbols to be used with medical device labels, labelling and information to be supplied ù Part 1: General
requirements First edition [Superseded: ISO 15223, ISO 15223, ISO 15223, ISO TR 15223, ISO TR 15223]
Nomenclature - Specification for a Nomenclature System for Medical Devices for the Purpose of Regulatory Data Exchange First
Edition; Amendment 1: 02/01/2004
Technical Product Documentation - Life Cycle Model and Allocation of Documents First Edition
Optics and Optical Instruments - Microscopes - Testing of Stereomicroscopes First Edition
Textile machinery and accessories Profile reeds for air jet weaving machines Dimensions First Edition
Mechanical vibration and shock - Coupling forces at the man-machine interface for hand-transmitted vibration First Edition
Paints and Varnishes - Testing of Formaldehyde-Emitting Coatings and Melamine Foams - Determination of the Steady-State
Concentration of Formaldehyde in a Small Test Chamber First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15236-1
15236-2
15236-3
15236-4
15237
15238
15239
15241
15242-1
Steel cord conveyor belts Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use First Edition
Steel cord conveyor belts Part 2: Preferred belt types First Edition
Steel cord conveyor belts ù Part 3: Special safety requirements for belts for use in underground installations First Edition
Steel cord conveyor belts Part 4: Vulcanized belt joints First Edition
Solid mineral fuels Determination of total mercury content of coal First Edition
Solid mineral fuels Determination of total cadmium content of coal First Edition; Corrected Version: 6/15/2004
Solid mineral fuels Evaluation of the measurement performance of on-line analysers First edition
Rolling bearings Symbols for quantities First Edition
Rolling bearings Measuring methods for vibration Part 1: Fundamentals First Edition
ISO
15242-2
ISO
ISO
ISO
ISO
15242-3
15243
15245-1
15245-2
ISO
15247
ISO
15248
ISO
15249
Rolling bearings Measuring methods for vibration Part 2: Radial ball bearings with cylindrical bore and outside surface First Edition
Rolling bearings Measuring methods for vibration Part 3: Radial spherical and tapered roller bearings with cylindrical bore and
outside surface First Edition
Rolling bearings Damage and failures Terms, characteristics and causes First Edition
Gas Cylinders - Parallel Threads for Connection of Valves to Gas Cylinders - Part 1: Specification First Edition
Gas Cylinders - Parallel Threads for Connection of Valves to Gas Cylinders - Part 2: Gauge Inspection First Edition
Zinc Sulfide Concentrates - Determination of Silver Content - Acid Dissolution and Flame Atomic Absorption Spectrometric Method
First Edition
Zinc Sulfide Concentrates - Determination of Silver and Gold Contents - Fire Assay and Flame Atomic Absorption Spectrometric
Method Using Scorification or Cupellation First Edition
Zinc Sulfide Concentrates - Determination of Gold Content - Acid Dissolution/Solvent Extraction/Flame Atomic Absorption
Spectrometric Method First Edition
ISO
15252-1
ISO
15252-2
ISO
ISO
ISO
ISO
15252-3
15253
15254
15261
ISO
ISO
ISO
15265
15267
15270
Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 1: Designation System and Basis for Specifications First Edition
Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties
First Edition
Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 3: Requirements for Selected Moulding Compounds First Edition
Ophthamic Optics and Instruments - Optical Devices for Enhancing Low Vision First Edition
Ophthalmic Optics and Instruments - Electro-Optical Devices for Enhancing Low Vision First Edition
Vibration and shock generating systems Vocabulary First Edition
Ergonomics of the thermal environment Risk assessment strategy for the prevention of stress or discomfort in thermal working
conditions First Edition
Animal and Vegetable Fats and Oils - Flashpoint Limit Test Using Pensky-Martens Closed Cup Flash Tester First Edition
Plastics Guidelines for the recovery and recycling of plastics waste First Edition
ISO
ISO
15286
15288
ISO
ISO
ISO
15289
15291
15292
ISO
15296
ISO
ISO
15301 CORR 1
15301
ISO
ISO
15302
15303
ISO
15304 CORR 1
ISO
ISO
15304
15305
ISO
ISO
ISO
ISO
ISO
15306
15307
15310
15312
15314
ISO
ISO
ISO
ISO
ISO
15318
15320
15322
15323
15324
ISO
ISO
ISO
ISO
15329
15330
15344
15348
Information Technology - 130 mm Optical Disk Cartridges for Information Interchange - Capacity: 5,2 Gbytes per Cartridge
Systems Engineering - System Life Cycle Processes First Edition
Systems and software engineering Content of systems and software life cycle process information products (Documentation) First
Edition
Information Technology - Programming Languages - Ada Semantic Interface Specification (ASIS) First Edition
Information Technology - Security Techniques - Protection Profile Registration Procedures First Edition
Gas welding equipment Vocabulary Terms used for gas welding equipment MatÚriel de soudage aux gaz Vocabulaire Termes
utilisÚs pour le matÚriel de soudage aux gaz First Edition
Animal and vegetable fats and oils ù Determination of sediment in crude fats and oils ù Centrifuge method TECHNICAL
CORRIGENDUM 1 First Edition
Animal and Vegetable Fats and Oils - Determination of Sediment in Crude Fats and Oils - Centrifuge Method First Edition
Animal and Vegetable Fats and Oils - Determination of Benzo[a]pyrene Content - Reverse-Phase High-Performance Liquid
Chromatography Method First Edition
Animal and Vegetable Fats and Oils - Detection and Identification of a Volatile Organic Contaminant by GC/MS First Edition
Animal and vegetable fats and oils Determination of the content of trans fatty acid isomers of vegetable fats and oils Gas
chromatographic method First Edition
Animal and vegetable fats and oils Determination of the content of trans fatty acid isomers of vegetable fats and oils Gas
chromatographic method First Edition
Animal and Vegetable Fats and Oils - Determination of Lovibond Colour First Edition
Glass-reinforced thermosetting plastics (GRP) pipes Determination of the resistance to cyclic internal pressure First Edition
Information Technology - Data Interchange on 12,7 mm 128-Track Magnetic Tape Cartridges - DLT 4 Format First Edition
Fibre-Reinforced Plastic Composites - Determination of the In-Plane Shear Modulus by the Plate Twist Method First Edition
Rolling bearings Thermal speed rating Calculation and coefficients First Edition
Plastics Methods for marine exposure First Edition
Pulp, Paper and Board - Determination of 7 Specified Polychlorinated Biphenyls (PCB) First Edition; Technical Corrigendum 1:
6/15/2001
Pulp, paper and board Determination of pentachlorophenol in an aqueous extract First Edition
Dried milk and dried milk products Determination of their behaviour in hot coffee (Coffee test) First edition
Dried Milk Protein Products - Determination of Nitrogen Solubility Index First Edition
Corrosion of Metals and Alloys - Evaluation of Stress Corrosion Cracking by the Drop Evaporation Test First Edition
Corrosion of metals and alloys Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys
First Edition
Fasteners - Preloading Test for the Detection of Hydrogen Embrittlement - Parallel Bearing Surface Method First Edition
Snowboard step-in bindings Requirements and test methods First Edition
Pipework - Metal Bellows Expansion Joints - General First Edition
ISO
15349-2
ISO
15350
ISO
15351
Unalloyed Steel - Determination of Low Carbon Content - Part 2: Infrared Absorption Method After Combustion in an Induction
Furnace (with Preheating) First Edition
Steel and Iron - Determination of Total Carbon and Sulfur Content - Infrared Absorption Method After Combustion in an Industion
Furnace (Routine Method) First Edition
Steel and Iron - Determination of Nitrogen Content - Thermal Conductimetric Method After Fusion in a Current of Inert Gas (Routine
Method) First Edition
ISO
ISO
ISO
ISO
15353
15355
15359
15360-1
Steel and Iron - Determination of Tin Content - Flame Atomic Absorption Spectrometric Method (Extraction as Sn-SCN) First Edition
Steel and Iron - Determination of Chromium Content - Indirect Titration Method First Edition
Paper and Board - Determination of the Static and Kinetic Coefficients of Friction - Horizontal Plane Method First Edition
Recycled Pulps - Estimation of Stickies and Plastics - Part 1: Visual Method First Edition
ISO
ISO
ISO
ISO
ISO
ISO
15360-2 CORR 1
15360-2
15361
15362
15363
15364
ISO
15366
ISO
15367-1
ISO
15367-2
ISO
ISO
15368
15370
ISO
ISO
ISO
ISO
ISO
15371
15372
15373
15374
15375
ISO
15378
Recycled Pulps - Estimation of Stickies and Plastics - Part 2: Image Analysis Method TECHNICAL CORRIGENDUM 1 First Edition
Recycled Pulps - Estimation of Stickies and Plastics - Part 2: Image Analysis Method First Edition
Pulps - Determination of Zero-Span Tensile Strength, Wet or Dry First Edition
Optics and Optical Instruments - Stereomicroscopes - Information Provided to the User First Edition
Metallic Materials - Tube Ring Hydraulic Pressure Test First Edition
Ships and Marine Technology-Pressure/Vacuum Valves for Cargo Tanks First Edition
Nuclear Energy - Chemical Separation and Purification of Uranium and Plutonium in Nitric Acid Solutions for Isotopic and Dilution
Analysis by Solvent Chromatography First Edition
Lasers and laser-related equipment Test methods for determination of the shape of a laser beam wavefront Part 1: Terminology and
fundamental aspects First Edition
Lasers and laser-related equipment Test methods for determination of the shape of a laser beam wavefront Part 2: Shack-Hartmann
sensors First Edition
Optics and Optical Instruments - Measurement of Reflectance of Plane Surfaces and Transmittance of Plane Parallel Elements First
Edition
Ships and Marine Technology - Low-Location Lighting on Passenger Ships - Arrangement First Edition
Ships and Marine Technology - Fire-Extinguishing Systems for Protection of Galley Deep-Fat Cooking Equipment - Fire Tests First
Edition
Ships and Marine Technology - Inflatable Rescue Boats - Coated Fabrics for Inflatable Chambers First Edition
Plastics Polymer dispersions Determination of free formaldehyde First Edition
Implants for Surgery - Requirements for Production of Forgings First Edition
Hanging devices for multiple use with infusion bottles Requirements and test methods First Edition
Primary packaging materials for medicinal products Particular requirements for the application of ISO 9001:2000, with reference to
Good Manufacturing Practice (GMP) First Edition
ISO
15379-1
ISO
15379-2
ISO
15380
ISO
ISO
15382
15383
ISO
ISO
ISO
ISO
ISO
ISO
15384
15387
15388
15389
15390
15394
Carbonaceous materials for the production of aluminium Cathode block materials Part 1: Determination of the expansion due to
sodium penetration with application of pressure First Edition
Carbonaceous materials for the production of aluminium Cathode block materials Part 2: Determination of the expansion due to
sodium penetration without application of pressure First Edition
Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HETG,
HEPG, HEES and HEPR First Edition
Nuclear Energy - Radioprotection - Procedure for Radiation Protection Monitoring in Nuclear Installations for External Exposure to
Weakly Penetrating Radiation, Especially to Beta Radiation
Protective Gloves for Firefighters - Laboratory Test Methods and Performance Requirements First Edition
Protective Clothing for Firefighters - Laboratory Test Methods and Performance Requirements for Wildland Firefighting Clothing First
Edition
Space systems Single-junction solar cells Measurement and calibration procedures First edition
Space systems Contamination and cleanliness control First Edition
Space systems - Flight-to-ground umbilicals First Edition; Amendment 1: 10/01/2005; Technical Corrigendum 1: 2/15/2006
Space environment (natural and artificial) Galactic cosmic ray model First Edition
Packaging - Bar Code and Two-Dimensional Symbols for Shipping, Transport and Receiving Labels First Edition
ISO
15395
Space Data and Information Transfer Systems - Standard Formatted Data Units - Control Authority Data Structures First Edition
ISO
ISO
ISO
ISO
15396
15401
15402
15403-1
ISO
15404
ISO
15407-1
ISO
15407-2
ISO
15408-1
ISO
15408-2
ISO
ISO
15408-3
15411
Space data and information transfer systems - Cross support reference model - Space link extension services Second edition
Ships and Marine Technology - Bulk Carriers - Construction Quality of Hull Structure First Edition
Ships and Marine Technology - Bulk Carriers - Repair Quality of Hull Structure First Edition
Natural gas Natural gas for use as a compressed fuel for vehicles Part 1: Designation of the quality First Edition;:2000
Information Technology - Office Machines - Minimum Information to be Included in Specification Sheets - Facsimile Equipment First
Edition
Pneumatic Fluid Power - Five-Port Directional Control Valves, Sizes 18 mm and 26 mm - Part 1: Mounting Interface Surfaces without
Electrical Connector First Edition
Pneumatic fluid power Five-port directional control valves, sizes 18 mm and 26 mm Part 2: Mounting interface surfaces with optional
electrical connector First Edition
Information Technology - Security Techniques - Evaluation Criteria for IT Security - Part 1: Introduction and General Model Second
Edition
Information technology Security techniques Evaluation criteria for IT security Part 2: Security functional requirements Second
Edition
Information technology Security techniques Evaluation criteria for IT security Part 3: Security assurance requirements Second
Edition
Information Technology - Segmented Keyboard Layouts First Edition
ISO
ISO
15412
15414
ISO
15415
ISO
ISO
15416
15418
ISO
15419
ISO
15420
ISO
15421
ISO
15423
ISO
15424
ISO
15426-1
ISO
15426-2
ISO
15428
ISO
15429
ISO
15430
ISO
15431
ISO
15432
Information Technology - Portable Computer Keyboard Layouts First Edition; Corrected and Reprinted 09/15/2000
Information Technology - Open Distributed Processing - Reference Model - Enterprise Language Second Edition
Information technology Automatic identification and data capture techniques Bar code print quality test specification Twodimensional symbols First Edition
Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Print Quality Test Specification - Linear
Symbols First Edition
Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance First Edition
Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Digital Imaging and Printing Performance
Testing First Edition
Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Symbology Specification - EAN/UPC
First Edition
Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Master Test Specifications First Edition
Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Scanner and Decoder Performance
Testing First Edition; Supersedes ISO/IEC 15423-1
Information Technology - Automatic Identification and Data Capture Techniques - Data Carrier Identifiers (Including Symbology
Identifiers) First Edition
Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 1:
Linear symbols Second Edition
Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 2:
Two-dimensional symbols First Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Wireless Terminal Location Registration Supplementary Service and
Wireless Terminal Information Exchange Additional Network Feature First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Wireless Terminal Location Registration Supplementary Service and Wireless Terminal
Information Exchange Additional Network Feature Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Wireless Terminal Call Handling Additional Network Features First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Wireless Terminal Call Handling Additional Network Features Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Wireless Terminal Authentication Supplementary Services (WTAT and
WTAN) First Edition
ISO
15433
ISO
ISO
15434
15437
ISO
ISO
15438
15442
ISO
15444-1 CORR 1
ISO
ISO
ISO
15444-1 AMD 1
15444-1
15444-2 CORR 4
ISO
ISO
ISO
ISO
15444-2 AMD 2
15444-2 CORR 3
15444-2
15444-3
ISO
ISO
15444-3 FDAM 3
15444-4
ISO
ISO
15444-5 AMD 1
15444-5
ISO
ISO
ISO
15444-6 AMD 1
15444-6
15444-8
ISO
15444-9 CORR 1
ISO
ISO
15444-9 AMD 1
15444-9
ISO
15444-9 FDAM 3
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Wireless Terminal Authentication Supplementary Services Second Edition
Information technology Automatic identification and data capture techniques Syntax for high-capacity ADC media Third Edition
Information Technology - Enhancements to LOTOS (E-LOTOS) First Edition
Information Technology - Automatic Identification and Data Capture Techniques - PDF417 bar code symbology specification Second
Edition
Cranes Safety requirements for loader cranes First Editon
Information technology ù JPEG 2000 image coding system: Core coding system TECHNICAL CORRIGENDUM 1 Second Edition
Information technology ù JPEG 2000 image coding system: Core coding system AMENDMENT 1: Profiles for digital cinema
applications Second Edition
Information technology ù JPEG 2000 image coding system: Core coding system Second Edition
Information technology ù JPEG 2000 image coding system: Extensions TECHNICAL CORRIGENDUM 4 First Edition
Information technology ù JPEG 2000 image coding system: Extensions AMENDMENT 2: Extended capabilities marker segment First
Edition
Information technology ù JPEG 2000 image coding system: Extensions TECHNICAL CORRIGENDUM 3 First Edition
Information technology ù JPEG 2000 image coding system: Extensions First Edition
Information technology ù JPEG 2000 image coding system: Motion JPEG 2000 Second Edition
Information technology JPEG 2000 image coding system Part 3: Motion JPEG 2000 AMENDMENT 3: Definition of compliance
points and testing for Motion JPEG 2000
Information Technology - JPEG 2000 Image Coding System: Conformance Testing Second Edition
Information technology ù JPEG 2000 image coding system: Reference software AMENDMENT 1: Reference software for the JP2 file
format First Edition
Information technology ù JPEG 2000 image coding system: Reference software First Edition
Information technology ù JPEG 2000 image coding system ù Part 6: Compound image file format AMENDMENT 1: Hidden text
metadata First Edition
Information technology JPEG 2000 image coding system Part 6: Compound image file format First Edition
Information technology ù JPEG 2000 image coding system ù Part 8: Secure JPEG 2000 First Edition
Information technology ù JPEG 2000 image coding system: Interactivity tools, APIs and protocols TECHNICAL CORRIGENDUM 1
First Edition
Information technology ù JPEG 2000 image coding system: Interactivity tools, APIs and protocols ù Part 9: AMENDMENT 1: APIs,
metadata, and editing First Edition
Information technology ù JPEG 2000 image coding system: Interactivity tools, APIs and protocols First Edition
Information technology ù JPEG 2000 image coding system: Interactivity tools, APIs and protocols ù Part 9: AMENDMENT 3: JPIP
extensions First Edition
ISO
ISO
ISO
ISO
ISO
ISO
15444-11
Information technology ù JPEG 2000 image coding system: Wireless First Edition
Information technology ù JPEG 2000 image coding system ù Part 12: ISO base media file format TECHNICAL CORRIGENDUM 3
15444-12 CORR 3 Second Edition
Information technology ù JPEG 2000 image coding system ù Part 12: ISO base media file format AMENDMENT 1: Support for timed
15444-12 AMD 1 metadata, non-square pixels and improved sample groups Second Edition
Information technology ù JPEG 2000 image coding system ù Part 12: ISO base media file format TECHNICAL CORRIGENDUM 2
15444-12 CORR 2 Second Edition
Information technology ù JPEG 2000 image coding system ù Part 12: ISO base media file format TECHNICAL CORRIGENDUM 1
15444-12 CORR 1 Second Edition
15444-12
Information technology ù JPEG 2000 image coding system ù Part 12: ISO base media file format Second edition
ISO
ISO
ISO
ISO
15445
15457-1
15457-2
15457-3
ISO
ISO
15459-1
15459-2
ISO
ISO
ISO
ISO
ISO
15459-3
15459-4
15459-5
15459-6
15463
ISO
ISO
15465
15469
ISO
15470
ISO
ISO
15471
15472
ISO
ISO
15473
15474-1
Information Technology - Document Description and Processing Languages - HyperText Markup Language (HTML) First Editon
Identification Cards - Thin Flexible Cards - Part 1: Physical Characteristics First Edition
Identification cards ù Thin flexible cards ù Part 2: Magnetic recording technique Second edition
Identification Cards - Thin Flexible Cards - Part 3: Test Methods First Edition
Information technology Unique identifiers Part 1: Unique identifiers for transport units Second Edition [Superseded By: SAI AS
ISO/IEC 15459.1]
Information technology Unique identifiers Part 2: Registration procedures Second Edition
Information technology Unique identifiers Part 3: Common rules for unique identifiers First Edition [Superseded By: SAI AS ISO/IEC
15459.3]
Information technology Unique identifiers Part 4: Unique identifiers for supply chain management First Edition
Information technology ù Unique identifiers ù Part 5: Unique identifier for returnable transport items (RTIs)
Information technology ù Unique identifiers ù Part 6: Unique identifier for product groupings First Edition
Petroleum and natural gas industries Field inspection of new casing, tubing and plain-end drill pipe First Edition
Pipework Stripwound metal hoses and hose assemblies First Edition; Replaces ISO 7657:1995; ISO 7658:1984; ISO 8444:1985;
ISO 8445:1995; ISO 8446:1995; ISO 8447:1986; ISO 8448:1986; ISO 8449:1995; ISO 8450:1986 [Replaced: ISO 7657, ISO 7658,
ISO 8444, ISO 8445, ISO 8446, ISO 8447, ISO 8448, ISO 8449, ISO 8450]
Spatial Distribution of Daylight - CIE standard general sky Second Edition; CIE S 011/E:2003
Surface chemical analysis X-ray photoelectron spectroscopy Description of selected instrumental performance parameters First
Edition
Surface chemical analysis Auger electron spectroscopy Description of selected instrumental performance parameters First Edition
Surface Chemical Analysis - X-Ray Photoelectron Spectrometers - Calibration of Energy Scales First Edition
Soil Quality - Guidance on Laboratory Testing for Biodegradation of Organic Chemicals in Soil under Anaerobic Conditions First
Ediiton
Information Technology - CDIF Framework - Part 1: Overview First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15474-2
15475-1
15475-2
15475-3
15476-1
15476-2
15476-3
15476-4
15476-6
15480
15481
15482
15483
ISO
15485
ISO
15486
ISO
ISO
ISO
15487
15488
15489-1
ISO
15490
ISO
15493 CORR 1
ISO
15493
ISO
15494
ISO
ISO
15496 CORR 1
15496
ISO
15498
Information Technology - CDIF Framework - Part 2: Modelling and Extensibility First Edition
Information technology CDIF transfer format Part 1: General rules for syntaxes and encodings First Edition
Information technology CDIF transfer format Part 2: Syntax SYNTAX.1 First Edition
Information technology CDIF transfer format Part 3: Encoding ENCODING.1 First Edition
Information Technology - CDIF Semantic Metamodels - Part 1: Foundation First Edition
Information Technology - CDIF Semantic Meatmodels - Part 2: Common First Edition
Information technology CDIF semantic metamodel Part 3: Data definitions First Edition
Information technology - CDIF semantic metamodel - Part 4: Data models First Edition
Information technology - CDIF semantic metamodel - Part 6: State/event models First Edition
Hexagon Washer Head Drilling Screws with Tapping Screw Thread First Edition
Cross Recessed Pan Head Drilling Screws with Tapping Screw Thread First Edition
Cross Recessed Countersunk Head Drilling Screws with Tapping Screw Thread First Edition
Cross Recessed Raised Countersunk Head Drilling Screws with Tapping Screw Thread First Edition
Information Technology - Data Interchange on 120 mm Optical Disk Cartridges Using Phase Change PD Format - Capacity: 650
Mbytes per Cartridge First Edition
Information Technology - Data Interchange on 130 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using
Irreversible Effects - Capacity: 2,6 Gbytes per Cartridge First Edition
Textiles - Method for Assessing Appearance of Apparel and Other Textile End Products After Domestic Washing and Drying First
Edition
Collets with 8 setting angle for tool shanks Collets, nuts and fitting dimensions Second Edition
Information and Documentation - Records Management - Part 1: General First Edition
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Tensile Strength of Monolithic Ceramics at
Room Temperature First Edition
Plastics piping systems for industrial applications ù Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U)
and chlorinated poly(vinyl chloride) (PVC-C) ù Specifications for components and the system ù Metric series TECHNICAL
CORRIGENDUM 1 First Edition
Plastics piping systems for industrial applications ù Acrylonitrile-butadienestyrene (ABS), unplasticized poly(vinyl chloride) (PVC-U)
and chlorinated poly(vinyl chloride) (PVC-C) ù Specifications for components and the system ? Metric series First Edition
Plastics Piping Systems for Industrial Applications - Polybutene (PB), Polyethylene (PE) and Polypropylene (PP) - Specifications for
Components and the System - Metric Series First Edition; Corrected version: 2/01/2004
Textiles ù Measurement of water vapour permeability of textiles for the purpose of quality control TECHNICAL CORRIGENDUM 1
First Edition
Textiles ù Measurement of water vapour permeability of textiles for the purpose of quality control First Edition
Information Technology - Data Interchange on 90 mm Optical Disk Cartridges - HS-1 Format - Capacity: 650 Mbytes per Cartridge
First Edition
ISO
15500-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15500-2
15500-3
15500-4
15500-5
15500-6
15500-7
15500-8
15500-9
ISO
15500-10
ISO
15500-11
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 1: General Requirements and Definitions First
Edition; Amendment 1: 04/15/2003
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 2: Performance and General Test Methods First
Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 3: Check Valve First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 4: Manual Valve First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 5: Manual Cylinder Valve First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 6: Automatic Valve First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 7: Gas Injector First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 8: Pressure Indicator First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 9: Pressure Regulator First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 10: Gas-Flow Adjuster First Edition; Corrected
Version 4/1/2003
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 11: Gas/Air Mixer First Edition; Corrected Version
4/1/2003
ISO
15500-12
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 12: Pressure Relief Valve (PRV) First Edition
ISO
ISO
15500-13
15500-14
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15500-15
15500-16
15500-17
15500-18
15500-19
15501-1
15501-2
15502 CORR
ISO
15502
ISO
15504-1
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 13: Pressure Relief Device (PRD) First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 14: Excess Flow Valve First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 15: Gas-Tight Housing and Ventilation Hose First
Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 16: Rigid Fuel Line First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 17: Flexible Fuel Line First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 18: Filter First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 19: Fittings First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel Systems - Part 1: Safety Requiremnts First Edition
Road Vehicles - Compressed Natural Gas (CNG) Fuel Systems - Part 2: Test Methods First Edition
Household refrigerating appliances ù Characteristics and test methods TECHNICAL CORRIGENDUM 1
Household refrigerating appliances Characteristics and test methods First Edition; Supersedes ISO 5155:1995, ISO
7371:1995/A1:1997, ISO 8187:1991/A1:1997 and ISO 8561:1991/A1:1997
Information technology Process assessment Part 1: Concepts and vocabulary First Edition; Supersedes ISO/IEC TR 15504-1 and
ISO/IEC TR 15504-9
ISO
ISO
15504-2 CORR 1
15504-2
Software engineering ù Process assessment ù Part 2: Performing an assessment TECHNICAL CORRIGENDUM 1 First Edition
Software engineering ù Process assessment ù Part 2: Performing an assessment First Edition
ISO
15504-3
ISO
ISO
15504-4
15504-5
ISO
15505
ISO
15506
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15507
15509
15511
15512
15513
15516
15517
ISO
15521
ISO
15522
ISO
15526-1
ISO
15526-2
ISO
15528
ISO
15529
ISO
15531-1
ISO
15531-31
ISO
ISO
15531-32
15531-42
Information technology Process assessment Part 3: Guidance on performing an assessment First Edition
Information technology Process assessment Part 4: Guidance on use for process improvement and process capability
determination First Edition; Replaces ISO/IEC TR 15504-7:1998 and ISO/IEC TR 15504-8:1998
Information technology Process Assessment Part 5: An exemplar Process Assessment Model First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network
(PISN) - Specification, Functional Model and Information Flows - Message Waiting Indication Supplementary Service Third Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Message Waiting Indication Supplementary Service Third Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - PINX Clock Synchroization First Edition
Adhesives - Determination of the Bond Strength of Engineering-Plastic Joints First Edition
Information and documentation International Standard Identifier for Libraries and Related Organizations (ISIL) First Edition
Plastics - Determination of Water Content First Edition; Replaces ISO 960: 1988
Cranes - Competency Requirements for Crane Drivers (Operators), Slingers, Signallers and Assessors First Edition
Ships and marine technology Launching appliances for davit-launched lifeboats First Edition;:1985 [Replaced: ISO 6067]
Tobacco Determination of nitrate content Continuous-flow analysis method First Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Informatation Interchange - Helical Scan Recording - DDS-3
Format Using 125 m Length Tapes First Edition
Water Quality - Determination of the Inhibitory Effect of Water Consitituents on the Growth of Activated Sludge Microorganisms First
Edition
Plastics - Polyketone (PK) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications First Edition
Plastics - Polyketone (PK) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties
First Edition
Paints, Varnishes and Raw Materials for Paints and Varnishes - Sampling First Edition; Cancels and Replaces ISO 842: 1984 and
ISO 1512: 1991
Optics and photonics ù Optical transfer function ù Principles of measurement of modulation transfer function (MTF) of sampled
imaging systems Second Edition
Industrial automation systems and integration Industrial manufacturing management data Part 1: General overview First Edition
Industrial automation systems and integration Industrial manufacturing management data Part 31: Resource information model First
Edition
Industrial automation systems and integration Industrial manufacturing management data: Resources usage management Part 32:
Conceptual model for resources usage management data First Edition
Industrial automation systems and integration Industrial manufacturing management data Part 42: Time Model First Edition
ISO
15531-43
ISO
15534-1
ISO
ISO
ISO
ISO
15534-2
15534-3
15535
15536-1
ISO
15536-2
ISO
15537
ISO
15538
ISO
ISO
15540
15541
ISO
ISO
15544
15546
ISO
15547-1
ISO
ISO
15547-2
15550
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15552
15553
15579
15583
15584
15585
15586
15587-1
15587-2
Industrial automation systems and integration Industrial manufacturing management data Part 43: Manufacturing flow management
data: Data model for flow monitoring and manufacturing data exchange First Edition
Ergonomic Design for the Safety of Machinery - Part 1: Principles for Determining the Dimensions Required for Openings for WholeBody Access into Machinery First Edition
Ergonomic Design for the Safety of Machinery - Part 2: Principles for Determining the Dimensions Required for Access Openings
First Edition
Ergonomic Design for the Safety of Machinery - Part 3: Anthropometric Data First Edition
General requirements for establishing anthropometric databases Second Edition
Ergonomics Computer manikins and body templates Part 1: General requirements First edition
Ergonomics ù Computer manikins and body templates ù Part 2: Verification of functions and validation of dimensions for computer
manikin systems First edition
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs First Edition
Protective Clothing for Firefighters - Laboratory Test Methods and Performance Requirements for Protective Clothing with a
Reflective Outer Surface First Edition
Ships and Marine Technology - Fire Resistance of Hose Assemblies - Test Methods First Edition; Technical Corrigendum 1: 12-011999
Ships and Marine Technology - Fire Resistance of Hose Assemblies - Requirements for the Test Bench First Edition
Petroleum and Natural Gas Industries - Offshore Production Installations - Requirements and Guidelines for Emergency Response
First Edition
Petroleum and natural gas industries - Aluminium alloy drill pipe Second Edition
Petroleum, petrochemical and natural gas industries Plate-type heat exchangers Part 1: Plate-and-frame heat exchangers First
Edition
Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat
exchangers First Edition; Together with ISO 15547-1 replaces ISO 15547:2000
Internal Combustion Engines - Determination and Method for the Measurement of Engine Power - General Requirements
Pneumatic fluid power Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm Basic,
mounting and accessories dimensions First Edition
Water quality Isolation and identification of Cryptosporidium oocysts and Giardia cysts from water First Edition
Metallic Materials - Tensile Testing at Low Temperature First Edition
Ships and marine technology Maritime standards list First edition
Small Craft - Inboard Petrol Engines - Engine-Mounted Fuel and Electrical Components First Edition
Hard coal Determination of caking index First Edition
Water quality Determination of trace elements using atomic absorption spectrometry with graphite furnace First Edition
Water Quality - Digestion for the Determination of Selected Elements in Water - Part 1: Aqua Regia Digestion First Edition
Water Quality - Digestion for the Determination of Selected Elements in Water - Part 2: Nitric Acid Digestion First Edition
ISO
15589-1
ISO
15589-2
ISO
15590-1
ISO
15590-2
ISO
15590-3
ISO
15592-1
ISO
15592-2
ISO
15592-3
ISO
ISO
15593
15595
ISO
ISO
ISO
ISO
ISO
ISO
15597
15598
15600
15601
15605
15606
ISO
ISO
15607 CORR 1
15607
ISO
15609-1 CORR 1
ISO
15609-1
ISO
15609-2
Petroleum and Natural Gas Industries - Cathodic Protection of Pipeline Transportation Systems - Part 1: On-Land Pipelines First
Edition
Petroleum and natural gas industries Cathodic protection of pipeline transportation systems Part 2: Offshore pipelines First Edition
Petroleum and Natural Gas Industries - Induction Bends, Fittings and Flanges for Pipeline Transportation Systems - Part 1: Induction
Bends First Edition
Petroleum and natural gas industries - induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings First
Edition
Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges First
Edition
Fine-Cut Tobacco and Smoking Articles Made from It - Methods of Sampling, Conditioning and Analysis - Part 1: Sampling First
Edition
Fine-Cut Tobacco and Smoking Articles Made from It - Methods of Sampling, Conditioning and Analysis - Part 2: Atmosphere for
Conditioning and Testing First Edition
Fine-Cut Tobacco and Smoking Articles Made From It - Methods of Sampling, Conditioning and Analysis - Part 3: Determination of
Total Particulate Matter of Smoking Articles Using a Routine Anaytical Smoking Machine, Preparation for the Determination of Water
and Nicotine, and Calculation of Nicotine-Free Dry Particulate Matter First Edition
Environmental Tobacco Smoke - Estimation of Its Contribution to Respirable Suspended Particles - Determination of Particulate
Matter by Ultraviolet Absorbance and by Fluorescence First Edition
Gas cylinders Specifications and testing of LPG cylinder valves Manually operated First Edition
Petroleum and Related Products - Determination of Chlorine and Bromine Content - Wavelength-Dispersive X-Ray Fluorescence
Spectrometry First Edition
Tea - Determination of Crude Fibre Content First Edition
Tools for Moulding - Thermal Insulating Sheets for Injection Moulds First Edition
Hammers - Technical Specifications Concerning Steel Hammer Heads - Test Procedures First Edition
Adhesives - Sampling First Edition
Dental Handpieces - Air-Powered Scalers and Scaler Tips First Edition
Specification and qualification of welding procedures for metallic materials ù General rules TECHNICAL CORRIGENDUM 1 First
Edition
Specification and qualification of welding procedures for metallic materials - General rules First Edition
Specification and qualification of welding procedures for metallic materials ù Welding procedure specification ù Part 1: Arc welding
TECHNICAL CORRIGENDUM 1 First Edition
Specification and qualification of welding procedures for metallic materials ù Welding procedure specification ù Part 1: Arc welding
First Edition [Replaced: ISO 9956-2]
Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Specification - Part 2: Gas Welding
First Edition
ISO
15609-3
ISO
15609-4
ISO
15609-5
ISO
15610
ISO
15611
ISO
15612
ISO
15613
ISO
15614-1 CORR 1
ISO
15614-1
ISO
15614-2 CORR 1
ISO
15614-2
ISO
15614-4 CORR 1
ISO
15614-4
ISO
15614-5
ISO
15614-6
ISO
15614-7
ISO
15614-8
ISO
15614-10
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 3: Electron beam
welding First Edition; Replaces ISO 9956-10:1996
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam
welding First Edition; Replaces ISO 9956-11
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance
welding First Edition
Specification and qualification of welding procedures for metallic materials Qualification based on tested welding consumables First
Edition; Replaces ISO 9956-5
Specification and qualification of welding procedures for metallic materials Qualification based on previous welding experience First
Edition
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
First Edition; Replaces ISO 9956-7:1995
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test First
Edition; Supersedes ISO 9956-8:1995
Specification and qualification of welding procedures for metallic materials ù Welding procedure test ù Part 1: Arc and gas welding of
steels and arc welding of nickel and nickel alloys TECHNICAL CORRIGENDUM 1 First Edition
Specification and qualification of welding procedures for metallic materials ù Welding procedure test ù Part 1: Arc and gas welding of
steels and arc welding of nickel and nickel alloys First Edition
Specification and qualification of welding procedures for metallic materials ù Welding procedure test ù Part 2: Arc welding of
aluminium and its alloys TECHNICAL CORRIGENDUM 1 First edition
Specification and qualification of welding procedures for metallic materials ù Welding procedure test ù Part 2: Arc welding of
aluminium and its alloys First edition
Specification and qualification of welding procedures for metallic materials ù Welding procedure test ù Part 4: Finishing welding of
aluminium castings TECHNICAL CORRIGENDUM 1 First Edition
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 4: Finishing welding of
aluminium castings First Edition
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 5: Arc welding of titanium,
zirconium and their alloys First Edition
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 6: Arc and gas welding of
copper and its alloys First Edition
Specification and qualification of welding procedures for metallic materials ù Welding procedure test ù Part 7: Overlay welding First
Edition
Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 8: Welding of Tubes to
Tube-Plate Joints First Edition
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 10: Hyperbaric dry welding
First Edition
ISO
15614-11
ISO
15614-12
ISO
15614-13
ISO
15615
ISO
15616-1
ISO
15616-2
ISO
ISO
15616-3
15618-1
ISO
ISO
ISO
15618-2
15620
15621
ISO
15622
ISO
ISO
ISO
15623
15628
15629
ISO
15630-1
ISO
ISO
15630-2
15630-3
ISO
15632
ISO
ISO
ISO
15634
15635
15636
Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 11: Electron and Laser
Beam Welding First Edition
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 12: Spot, seam and
projection welding First Edition
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Resistance butt and
flash welding First Edition
Gas Welding Equipment - Acetylene Manifold Systems for Welding, Cutting and Allied Processes - Safety Requirements in HighPressure Devices First Edition
Acceptance Tests for CO2-Laser Beam Machines for High Quality Welding and Cutting - Part 1: General Principles, Acceptance
Conditions First Edition
Acceptance Tests for CO2-Laser Beam Machines for High Quality Welding and Cutting - Part 2: Measurement of Static and Dynamic
Accuracy First Edition
Acceptance Tests for CO2-Laser Beam Machines for High Quality Welding and Cutting - Part 3: Calibration of Instruments for
Measurement of Gas Flow and Pressure First Edition
Qualification Testing of Welders for Underwater Welding - Part 1: Diver-Welders for Hyperbaric Wet Welding First Edition
Qualification Testing of Welders for Underwater Welding - Part 2: Diver-Welders and Welding Operators for Hyperbaric Dry Welding
First Edition
Welding - Friction Welding of Metallic Materials First Edition
Urine-Absorbing Aids - General Guidance on Evaluation First Edition
Transport Information and Control Systems Adaptive Cruise Control Systems Performance Requirements and Test Procedures First
Edition
Transport Information and Control Systems - Forward Vehicle Collision Warning Systems - Performance Requirements and Test
Procedures First Edition
Road transport and traffic telematics ù Dedicated short range communication (DSRC) ù DSRC application layer First Edition
Pallets for materials handling Quality of fasteners for assembly of new and repair of used, flat, wooden pallets First Edition
Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 1: Reinforcing Bars, Wire Rod and Wire First Edition
Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 2: Welded Fabric First Edition; This Standard
Together with 15630-1 and 15630-3 Replaces ISO 10065, 10287 and 10606
Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 3: Prestressing Steel First Edition
Microbeam Analysis - Instrumental Specification for Energy Dispersive X-ray Spectrometers with Semiconductor Detectors First
Edition
Iron ores Determination of chromium content Flame atomic absorption spectrometric method First edition; Together with ISO 15633
replaces ISO 9685:1991
Coated Abrasives - Flap Discs First Edition
Back-up pads for vulcanized fibre discs First Edition
ISO
ISO
ISO
15637-1
15637-2
15641
Holding fixtures of cylindrical abrasive sleeves Part 1: Holding fixtures with shank for hand-held grinding machines First Edition
Holding fixtures of cylindrical abrasive sleeves Part 2: Holding fixtures for stationary machines First Edition
Milling Cutters for High Speed Machining - Safety Requirements First Edition
ISO
15642
ISO
15643
Road construction and maintenance equipment Asphalt mixing plants Terminology and commercial specifications First Edition
Road Construction and Maintenance Equipment - Bituminous Binder Spreaders/Sprayers - Terminology and Commercial
Specifications First Edition
ISO
15644
Road Construction and Maintenance Equipment Chippings Spreaders Terminology and Commercial Specifications First Edition
ISO
15645
Road Construction and Maintenance Equipment Road Milling Machinery Terminology and Commercial Specifications First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15647
15648
15649
15652
15654
15662
15663-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15663-2
15663-3
15664
15665 CORR 1
15665
15667
15668
15671
15672
15673
ISO
ISO
15674
15675
ISO
15676
Nuclear energy Isotopic analysis of uranium hexafluoride Double-standard gas-source mass spectrometric method First Edition
Butter Determination of salt content Potentiometric method First Edition; IDF 179
Petroleum and Natural Gas Industries - Piping First Edition
Small craft Remote steering systems for inboard mini jet boats First Edition
Fatigue test method for transmission precision roller chains First Edition
Intelligent transport systems Wide area communication Protocol management information First Edition
Petroleum and Natural Gas Industries - Life Cycle Costing - Part 1: Methodology First Edition
Petroleum and Natural Gas Industries - Life-Cycle Costing - Part 2: Guidance on Application of Methodology and Calculation Methods
First Edition
Petroleum and Natural Gas Industries - Life-Cycle Costing - Part 3: Implementation Guidelines First Edition
Acoustics - Noise Control Design Procedures for Open Plant First Edition
Acoustics ù Acoustic insulation for pipes, valves and flanges TECHNICAL CORRIGENDUM 1 First Edition
Acoustics ù Acoustic insulation for pipes, valves and flanges First edition
Acoustics - Guidelines for Noise Control by Enclosures and Cabins First Edition
Banking - Secure File Transfer (Retail) First Edition
Rubber and Rubber Additives - Determination of Total Sulfur Content Using an Automatic Analyser First Edition
Rubber and Rubber Additives - Determination of Total Nitrogen Content Using an Automatic Analyser First Edition
Guidelines for the simplified design of structural reinforced concrete for buildings First Edition
Cardiovascular Implants and Artificial Organs - Hard-Shell Cardiotomy/Venous Reservoir Systems (With/Without Filter) and Soft
Venous Reservoir Bags First Edition
Cardiovascular Implants and Artificial Organs - Cardiopulmonary Bypass Systems - Arterial Line Blood Filters First Edition
Cardiovascular implants and artificial organs - Requirements for single-use tubing packs for cardiopulmonary bypass and
extracorporeal membrane oxygenation (ECMO) First Edition
Water quality Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several
chlorinated compounds using purge-and-trap and thermal desorption First Edition
Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 1: Method by flow
injection analysis (FIA) First Edition
Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 2: Method by
continuous flow analysis (CFA) First Edition
ISO
15680
ISO
15681-1
ISO
15681-2
ISO
15682
ISO
ISO
ISO
ISO
15685
15686-1
15686-2
15686-3
Soil quality Determination of potential nitrification and inhibition of nitrification Rapid test by ammonium oxidation First Edition
Buildings and Constructed Assets - Service Life Planning - Part 1: General Principles First Edition
Buildings and Constructed Assets - Service Life Planning - Part 2: Service Life Prediction Procedures First Edition
Buildings and Constructed Assets - Service Life Planning - Part 3: Performance Audits and Reviews First Edition
ISO
15686-6
ISO
ISO
15686-7
15688
Buildings and constructed assets Service life planning Part 6: Procedures for considering environmental impacts First Edition
Buildings and constructed assets Service life planning Part 7: Performance evaluation for feedback of service life data from practice
First Edition
Road construction and maintenance equipment Soil stabilizers Terminology and commercial specifications First Edition
ISO
ISO
15689
15693-1
Road construction and maintenance equipment Powder binder spreaders Terminology and commercial specifications First Edition
Identification Cards - Contactless Integrated Circuit(s) Cards - Vicinity Cards - Part 1: Physical Characteristics First Edition
ISO
15693-2
ISO
15693-3
ISO
ISO
15695
15700
Identification Cards - Contactless Integrated Circuit Cards - Vicinity Cards - Part 2: Air Interface and Initialization Second Edition
Identification Cards - Contactless Integrated Circuit(s) Cards - Vicinity Cards - Part 3: Anticollision and Transmission Protocol First
Edition
Vitreous and Porcelain Enamels - Determination of Scratch Resistance of Enamel Finishes First Edition; Technical
Corrigendum,11/01/2000
Leather - Tests for Colour Fastness - Colour Fastness to Water Spotting First Edition; IULTCS; IUF 420
ISO
ISO
ISO
15701
15702
15703
ISO
15704
Leather - Test for Colour Fastness - Colour Fastness to Migration into Plasticized Poly(Vinyl Chloride) First Edition; IULTCS; IUF 442
Leather - Tests for Colour Fastness - Colour Fastness to Machine Washing First Edition; IULTCS; IUF 435
Leather - Tests for Colour Fastness - Colour Fastness to Mild Washing First Edition; IULTCS; IUF 423
Industrial automation systems - Requirements for enterprise-reference architectures and methodologies - AMENDMENT 1: Additional
views for user concerns First Edition; Amendment 1: 08/15/2005
ISO
15705
Water quality Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube method First Edition
Water Quality - Determination of Chloride by Flow Analysis (CFA and FIA) and Photometric or Potentiometric Detection First Edition
ISO
ISO
ISO
ISO
ISO
ISO
15706
15706-2
15707
15708-1
15708-2
15709
ISO
15710
ISO
15711
ISO
15712-1
ISO
15712-2
ISO
15712-3
ISO
ISO
ISO
ISO
15712-4
15713
15715
15717
ISO
15718
ISO
15720
ISO
15721
ISO
15724
ISO
15730
ISO
15731
ISO
15732
Information and Documentation - International Standard Audiovisual Number (ISAN) First Edition
Information and documentation ù International Standard Audiovisual Number (ISAN) ù Part 2: Version identifier First Edition
Information and Documentation - International Standard Musical Work Code (ISWC) First Edition
Non-Destructive Testing - Radiation Methods - Computed Tomography - Part 1: Principles First Edition
Non-Destructive Testing - Radiation Methods - Computed Tomography - Part 2: Examination Practices First Edition
Soil Quality - Soil Water and the Unsaturated Zone - Definitions, Symbols and Theory First Edition
Paints and Varnishes - Corrosion Testing by Alternate Immersion in and Removal from a Buffered Sodium Chloride Solutions First
Edition
Paints and Varnishes - Determination of Resistance to Cathodic Disbonding of Coatings Exposed to Sea Water First Edition
Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 1: Airborne sound
insulation between rooms First Edition
Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 2: Impact sound
insulation between rooms First Edition
Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 3: Airborne sound
insulation against outdoor sound First Edition
Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 4: Transmission of indoor
sound to the outside First Edition
Stationary source emissions Sampling and determination of gaseous fluoride content First Edition
Binders for Paints and Varnishes - Determination of Turbidity First Edition
Kitchen Equipment - Safety Requirements and Test Methods for Kitchen Cabinets and Work Tops First Edition
Information Technology - Data Interchange on 8 mm Wide Magnetic Tape Cartridge - Helical Scan Recording - HH-1 Format First
Edition
Metallic Coatings - Porosity Tests - Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography First
Edition
Metallic Coatings - Porosity Tests - Porosity in Gold or Palladium Coatings by Sulfurous Acid/Sulfur Dioxide Vapour First Edition
Metallic and Other Inorganic Coatings - Electrochemical Measurement of Diffusible Hydrogen in Steels - Barnacle Electrode Method
First Edition
Metallic and Other Inorganic Coatings - Electropolishing as a Means of Smoothing and Passivating Stainless Steel First Edition
Information Technology - 12,65 mm Wide Magnetic Tape Cassette for Information Interchange - Helical Scan Recording - DTF-1
Format First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for fracture toughness of monolithic ceramics at
room temperature by single edge precracked beam (SEPB) method First Edition
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Tensile Stress-Strain Behaviour of
Continuous, Fibre-Reinforced Composites at Room Temperature First Edition
Ships and Marine Technology - Hydrostatic Release Units First Edition
ISO
ISO
15733
15734
ISO
ISO
ISO
ISO
15736
15738
15739
15740
ISO
ISO
15741
15744
ISO
15745-1 AMD 1
ISO
15745-1
ISO
15745-2
ISO
15745-3
ISO
15745-4 AMD 2
ISO
15745-4 AMD 1
ISO
15745-4
ISO
ISO
15745-5
15747
Industrial automation systems and integration ù Open systems application integration framework ù Part 4: Reference description for
Ethernet-based control systems AMENDMENT 2: Profiles for Modbus TCP, EtherCAT and ETHERNET Powerlink First Edition
Industrial automation systems and integration ù Open systems application integration framework ù Part 4: Reference description for
Ethernet-based control systems AMENDMENT 1: PROFINET profiles First Edition
Industrial automation systems and integration Open systems application integration framework Part 4: Reference description for
Ethernet-based control systems First Edition
Industrial automation systems and integration ù Open systems application integration framework ù Part 5: Reference description for
HDLC-based control systems First Edition
Plastics containers for intravenous injection First Edition
ISO
15748-1
Ships and Marine Technology - Potable Water Supply on Ships and Marine Structures - Part 1: Planning and Design First Edition
ISO
15748-2
ISO
15749-1
Ships and Marine Technology - Potable Water Supply on Ships and Marine Structures - Part 2: Method of Calculation First Edition
Ships and marine technology Drainage systems on ships and marine structures Part 1: Sanitary drainage-system design First
Edition
Ships and marine technology Pyrotechnic life-saving appliances Testing, inspection and marking of production units First Edition
Ships and Marine Technology - Gas Inflation Systems for Inflatable Life-Saving Appliances First Edition
Photography Electronic still-picture imaging Noise measurements First Edition
Photography Electronic still picture imaging Picture transfer protocol (PTP) for digital still photography devices First Edition
Paints and Varnishes - Friction-Reduction Coatings for the Interior of On- and Offshore Steel Pipelines for Non-Corrosive Gases First
Edition
Hand-Held Non-Electric Power Tools - Noise Measurement Code - Engineering Method (Grade 2) First Edition
Industrial automation systems and integration ù Open systems application integration framework ù Part 1: Generic reference
description AMENDMENT 1 First Edition
Industrial Automation Systems and Integration - Open Systems Application Integration Framework - Part 1: Generic Reference
Description First Edition
Industrial automation systems and integration Open systems application integration framework Part 2: Reference description for ISO
11898-based control systems First Edition
Industrial automation systems and integration Open systems application integration framework Part 3: Reference description for IEC
61158-based control systems First Edition
Ships and marine technology Drainage systems on ships and marine structures Part 2: Sanitary drainage, drain piping for gravity
systems First Edition
Ships and marine technology Drainage systems on ships and marine structures Part 3: Sanitary drainage, drain piping for vacuum
systems First Edition
Ships and marine technology Drainage systems on ships and marine structures Part 4: Sanitary drainage, sewage disposal pipes
First Edition
Ships and marine technology Drainage systems on ships and marine structures Part 5: Drainage of decks, cargo spaces and
swimming pools First Edition
Packaging Steel Drums Part 1: Removable Head (Open Head) Drums with a Minimum Total Capacity of 208 l, 210 l and 216,5 I
First Edition
Packaging Steel Drums Part 2: Non-Removable Head (Tight Head) Drums with a Minimum Total Capacity of 212 I, 216,5 I and 230,
I First Edition
Packaging - Steel Drums - Part 3: Inserted Flange-Type Closure Systems First Edition
ISO
15749-2
ISO
15749-3
ISO
15749-4
ISO
15749-5
ISO
15750-1
ISO
ISO
15750-2
15750-3
ISO
ISO
ISO
15752
15753
15755
ISO
15757
ISO
15758
ISO
ISO
15759
15761
ISO
ISO
ISO
ISO
15763
15764
15765-1
15765-2
ISO
15765-3
Ophthalmic Instruments - Endoilluminators - Fundamental Requirements and Test Methods for Optical Radiation Safety First Edition
Animal and vegetable fats and oils Determination of polycyclic aromatic hydrocarbons First Edition
Paper and Board - Estimation of Contraries First Edition
Information Technology - Data Interchange on 8 mm Wide Magnetic Tape Cartridge - Helical Scan Recording - DA-2 Format First
Edition
Hygrothermal performance of building equipment and industrial installations Calculation of water vapour diffusion Cold pipe
insulation systems First Edition
Medical Infusion Equipment - Plastics Caps with Inserted Elastomeric Liner for Containers Manufactured by the Blow-Fill-Seal (BFS)
Process Second edition
Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries First Edition
Road Vehicles - Alarm Systems for Buses and Commercial Vehicles of Maximum Authorized Total Mass Greater Than 3,5 t First
Edition
Road vehicles Extended data link security First Edition
Road vehicles Diagnostics on Controller Area Networks (CAN) Part 1: General information Frist Edition
Road vehicles Diagnostics on Controller Area Networks (CAN) Part 2: Network layer services First Edition
Road vehicles Diagnostics on Controller Area Networks (CAN) Part 3: Implementation of unified diagnostic services (UDS on CAN)
First Edition
ISO
ISO
15765-4
15767
Road vehicles Diagnostics on Controller Area Networks (CAN) Part 4: Requirements for emissions-related systems First Edition
Workplace Atmospheres - Controlling and Characterizing errors in weighing Collected Aerosols First Edition
ISO
15771
ISO
15772
ISO
15773
ISO
15774
ISO
15775
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15775 FDAM 1
15776
15780
15782-1
15782-2
15783
15783 DAM 1
15785
15787
ISO
15788-1
ISO
15788-2
ISO
ISO
15790
15791-1
ISO
15792-1
ISO
15792-2
ISO
ISO
ISO
15792-3
15793
15794
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Common Information Additional Network Feature First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Common Information Additional Network Feature Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Broadband Private Integrated Services
Network - Inter-Exchange Signalling Protocol - Transit Counter Additional Network Feature First Edition
Animal and Vegetable Fats and Oils - Determination of Cadmium Content by Direct Graphite Furnace Atomic Absorption
Spectrometry First Edition
Information Technology - Office Machines - Method of Specifying Image Reproduction of Colour Copying Machines by Analog Test
Charts - Realisation and Application First Edition; AMD 1: 3/1/2005
Information technology Office machines Method of specifying image reproduction of colour copying machines by analog test charts
Realisation and application AMENDMENT 1
VME64bus - Specification First Edition
Information Technology - 8 mm Wide Magnetic Tape Cartridge - Helical Scan Recording - AIT-1 Format First Edition
Certificate Management for Financial Services - Part 1: Public Key Certificates First Edition
Banking - Certificate Management - Part 2: Certificate Extensions First Edition
Seal-Less Rotodynamic Pumps - Class II - Specification First Edition
Seal-Less Rotodynamic Pumps - Class II - Specification
Technical Drawings - Symbolic Presentation and Indication of Adhesive, Fold and Pressed Joints First Edition
Technical Product Documentation - Heat-Treated Ferrous Parts - Presentation and Indications First Edition
Animal and Vegetable Fats and Oils - Determination of Stigmastadienes in Vegetable Oils - Part 1: Method Using Capillary-Column
Gas Chromatography (Reference Method) First Edition
Animal and Vegetable Fats and Oils - Determination of Stigmastadienes in Vegetable Oils - Part 2: Method Using High-Performance
Liquid Chromatography (HPLC) First Edition
Graphic technology and photography Certified reference materials for reflection and transmission metrology Documentation and
procedures for use, including determination of combined standard uncertainty First Edition
Plastics Development and use of Intermediate-Scale Fire Tests for Plastics Products Part 1: General Guidance
Welding Consumables - Test Methods - Part 1: Test Methods for All-Weld Metal Test Specimens in Steel, Nickel and Nickel Alloys
First Edition
Welding Consumables - Test Methods - Part 2: Preparation of Single-Run and Two-Run Technique Test Specimens in Steel First
Edition
Welding Consumables - Test Methods - Part 3: Classification Testing of Positional Capacity and Root Penetration of Welding
Consumables in a Fillet Weld First Edition; Corrigendum 1: 11/1/2006
Durum Wheat Semolinas - Determination of the Undersize Fraction First Edition
Bi-Directional and Multi-Directional Fork-Lift Trucks - Stability Tests First Edition
ISO
15795 CORR 1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15795
15796
15797 CORR 1
15797
15798
15799
15800
ISO
15802-1
ISO
15802-2
ISO
15802-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15802-4
15812
15814
15816
15817
15821
15822
ISO
15825 CORR 1
ISO
ISO
15825
15828
ISO
15829
ISO
15830-1
ISO
15830-2
Optics and optical instruments ù Quality evaluation of optical systems ù Assessing the image quality degradation due to chromatic
aberrations TECHNICAL CORRIGENDUM 1 First Edition
Optics and Optical Instruments - Quality Evaluation of Optical Systems - Assessing the Image Quality Degradation due to Chromatic
Aberrations First Edition
Gas analysis Investigation and treatment of analytical bias First Edition
Textiles ù Industrial washing and finishing procedures for testing of workwear TECHNICAL CORRIGENDUM 1 First Edition
Textiles - Industrial Washing and Finishing Procedures for Testing of Workwear First Edition
Ophthalmic Implants - Ophthalmic Viscosurgical Devices First Edition; Technical Corrigendum 1: 11/1/03
Soil Quality - Guidance on the Ecotoxicological Characterization of Soils and Soil Materials First Edition
Soil quality - Characterization of soil with respect to human exposure First Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks Common Specifications - Part 1: Medium Access Control (MAC) Service Definition First Edition; Replaces ISO 10039
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks Common Specifications - Part 2: LAN/MAN Management First Edition; (ANSI/IEEE 802.1B)
Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks Common Specifications - Part 3: Media Access Control (MAC) Bridges First Edition; ANSI/IEEE Std 802.1D
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks Common Specifications - Part 4: System Load Protocol First Edition; (ANSI/IEEE 802.1E)
Continuous Mill Flat Rolled Products - Guidelines for Improved Ordering Communication First Edition
Implants for Surgery - Copolymers and Blends Based on Polylactide - In Vitro Degradation Testing First Edition
Information Technology - Security Techniques - Security Information Objects for Access Control First Edition
Earth-moving machinery - Safety requirements for remote operator control First Edition
Doorsets and windows ù Watertightness test under dynamic pressure ù Cyclonic aspects First Edition
Test method of doorset opening performance in diagonal deformation ù Seismic aspects First Edition
Rubber compounding ingredients ù Carbon black ù Determination of aggregate size distribution by disc centrifuge
photosedimentometry TECHNICAL CORRIGENDUM 1 First Edition
Rubber compounding ingredients ù Carbon black ù Determination of aggregate size distribution by disc centrifuge
photosedimentometry First Edition
Road vehicles Offset frontal impact test procedure First Edition
Road vehicles Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
First Edition
Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 1:
Terminology and rationale First Edition
Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 2: Mechanical
subsystems First Edition
ISO
15830-3
ISO
ISO
ISO
15830-4
15831
15836
ISO
15837
ISO
ISO
15838
15839
ISO
ISO
15840
15841
ISO
15848-1
ISO
15848-2
ISO
15849
ISO
ISO
ISO
15850
15851
15852
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15853
15854
15859-1
15859-2
15859-3
15859-4
15859-5
15859-6
15859-7
15859-8
15859-9
Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 3: Electronic
subsystems First Edition
Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 4: User s
manual First Edition
Clothing Physiological effects Measurement of thermal insulation by means of a thermal manikin First Edition
Information and documentation The Dublin Core metadata element set First Edition
Ships and marine technology Gasketed mechanical couplings for use in piping systems Performance specification First Edition
Ships and marine technology Fittings for use with gasketed mechanical couplings used in piping applications Performance
specification First Edition
Water quality On-line sensors/analysing equipment for water Specifications and performance tests First Edition
Ships and marine technology Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine
applications First Edition
Dentistry Wires for use in orthodontics First Edition
Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 1: Classification system and
qualification procedures for type testing of valves First Edition
Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 2: Production acceptance test of valves
First Edition
Ships and marine technology Guidelines for implementation of a fleet management system network First Edition; Amendment 1:
09/01/2003
Plastics - Determination of Tension-Tension Fatigue Crack Propagation - Linear Elastic Fracture Mechanics (LEFM) Approach First
Edition
Information Technology - Communication Protocol - Open MUMPS Interconnect First Edition
Information Technology - Programming Languages - M Windowing API First Edition
Thermoplastics Materials - Preparation of Tubular Test Pieces for the Determination of the Hydrostatic Strength of Materials Used for
Injection Moulding First Edition
Dentistry - Casting and baseplate waxes First Edition; Replaces ISO 1561:1995 and ISO 12163:1999
Space systems Fluid characteristics, sampling and test methods Part 1: Oxygen First Edition
Space systems Fluid characteristics, sampling and test methods Part 2: Hydrogen First Edition
Space systems Fluid characteristics, sampling and test methods Part 3: Nitrogen First Edition
Space systems Fluid characteristics, sampling and test methods Part 4: Helium First Edition
Space systems Fluid characteristics, sampling and test methods Part 5: Nitrogen tetroxide propellants First Edition
Space systems Fluid characteristics, sampling and test methods Part 6: Monomethylhydrazine propellant First Edition
Space systems Fluid characteristics, sampling and test methods Part 7: Hydrazine propellant First Edition
Space systems Fluid characteristics, sampling and test methods Part 8: Kerosine propellant First Edition
Space systems Fluid characteristics, sampling and test methods Part 9: Argon First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15859-10
15859-11
15859-12
15859-13
15860
15863
15864
15865
15867
15870
15871
15872
15873
Space systems Fluid characteristics, sampling and test methods Part 10: Water First Edition
Space systems Fluid characteristics, sampling and test methods Part 11: Ammonia First Edition
Space systems Fluid characteristics, sampling test methods Part 12: Carbon dioxide First Edition
Space systems Fluid characteristics, sampling and test methods Part 13: Breathing air First Edition
Space systems Gas contamination Measurement methods for field tests First edition
Space systems Spacecraft-to-launch-vehicle interface control document First Edition
Space systems General test methods for space craft, subsystems and units First Edition
Space systems Qualification assessment First Edition
Intermediate bulk containers (IBCs) for non-dangerous goods Terminology First Edition
Powered Industrial Trucks - Safety Signs and Hazard Pictorials - General Principles First Edition
Industrial Trucks - Specification for Indicator Lights for Container Handling and Grappler Arm Operations First Edition
Aerospace UNJ threads Gauging First Edition
Irrigation Equipment - Differential Pressure Ventrui-Tyope Liquid Additive Injectors First Edition
ISO
ISO
15874-1 AMD 1
15874-1
Plastics piping systems for hot and cold water installations ù Polypropylene (PP) ù Part 1: General AMENDMENT 1 First Edition
Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 1: General First Edition
ISO
ISO
ISO
15874-2 AMD 1
15874-2
15874-3
Plastics piping systems for hot and cold water installations ù Polypropylene (PP) ù Part 2: Pipes AMENDMENT 1 First Edition
Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 2: Pipes First Edition
Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 3: Fittings First Edition
ISO
15874-5
ISO
ISO
15875-1 AMD 1
15875-1
ISO
ISO
ISO
15875-2 AMD 1
15875-2
15875-3
ISO
15875-5
ISO
ISO
15876-1 AMD 1
15876-1
Plastics piping systems for hot and cold water installations ù Polybutylene (PB) ù Part 1: General AMENDMENT 1 First Edition
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General First Edition
ISO
15876-2 AMD 1
Plastics piping systems for hot and cold water installations ù Polybutylene (PB) ù Part 2: Pipes AMENDMENT 1 First edition
Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 5: Fitness for purpose of the system First Edition
Plastics piping systems for hot and cold water installations ù Crosslinked polyethylene (PE-X) ù Part 1: General AMENDMENT 1 First
Edition
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General First Edition
Plastics piping systems for hot and cold water installations ù Crosslinked polyethylene (PE-X) ù Part 2: Pipes AMENDMENT 1 First
Edition
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes First Edition
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings First Edition
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the
system First Edition
ISO
ISO
15876-2
15876-3
Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 2: Pipes First edition
Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 3: Fittings First Edition
ISO
15876-5
Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 5: Fitness for purpose of the system First Edition
ISO
15877-1
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 1: General First Edition
ISO
15877-2
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 2: Pipes First Edition
ISO
15877-3
ISO
ISO
15877-5
15880
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings First Edition
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 5: Fitness for purpose of
the system First Edition
Paint, Varnishes and Binders - Determination of MEQ Value of Water-Based Coating Materials and Binders First Edition
ISO
ISO
15882
15883-1
ISO
15883-2
ISO
ISO
ISO
ISO
15883-3
15884
15885
15886-1
ISO
ISO
ISO
ISO
15886-3
15887
15888
15889
Sterilization of Health Care Products - Chemical Indicators - Guidance for Selection, Use and Interpretation of Results First Edition
Washer-disinfectors Part 1: General requirements, terms and definitions and tests First Edition
Washer-disinfectors Part 2: Requirements and tests for washerdisinfectors employing thermal disinfection for surgical instruments,
anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. First Edition
Washer-disinfectors Part 3: Requirements and tests for washerdisinfectors employing thermal disinfection for human waste
containers First Edition
Milk fat Preparation of fatty acid methyl esters First Edition; IDF 182
Milk fat Determination of the fatty acid composition by gas-liquid chromatography First Edition; IDF 184
Agricultural irrigation equipment Sprinklers Part 1: Definition of terms and classification First Edition
Agricultural irrigation equipment Sprinklers Part 3: Characterization of distribution and test methods First Edition; Supersedes ISO
7749-2
Space Data and Information Transfer Systems - Data Systems - Lossless Data Compression First Edition
Space Data and Information Transfer Systems - Standard Formatted Data Units - Referencing Environment First Edition
Space data and information transfer systems - Data description language - EAST specification Second Edition
ISO
15891
Space Data and Information Transfer Systems - Protocol Specification for Space Communications - Network Protocol First Edition
ISO
15892
Space Data and Information Transfer Systems - Protocol Specification for Space Communications - Security Protocol First Edition
ISO
15893
Space Data and Information Transfer Systems - Protocol Specification For Space Communications - Transport Protocol First Edition
ISO
15894
Space Data and Information Transfer Systems - Protocol Specification For Space Communications - File Protocol First Edition
ISO
ISO
ISO
15895
15896
15897
Information Technology - Data Interchange on 12,7 mm 128-Track Magnetic Tape Cartridges - DLT 3-XT Format First Edition
Information Technology - Data Interchange on 12,7 mm 208-Track Magnetic Tape Cartridges - DLT 5 Format First Edition
Information Technology - Procedures for Registration of Cultural Elements First Edition
Information Technology - Data Interchange on 356 mm Optical Disk Cartridges - WORM, Using Phase Change Technology Capacity: 14,8 Gbytes and 25 Gbytes per Cartridge First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Broadband Private Integrated Services
Network - Service Description - Broadband Connection Oriented Bearer Services First Edition
Evaluation of pore size distribution and porosimetry of solid materials by mercury porosimetry and gas adsorption ù Part 1: Mercury
porosimetry TECHNICAL CORRIGENDUM 1 First Edition
Evaluation of pore size distribution and porosimetry of solid materials by mercury porosimetry and gas adsorption Part 1: Mercury
porosimetry First Edition
Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 2: Analysis of mesopores and
macropores by gas adsorption TECHNICAL CORRIGENDUM 1 First Edition
Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 2: Analysis of mesopores and
macropores by gas adsorption First Edition
Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption ù Part 3: Analysis of micropores by
gas adsorption First edition
Optics and photonics ù Diffractive optics ù Vocabulary TECHNICAL CORRIGENDUM 1 Optique et photonique ù Optique diffractive ù
Vocabulaire RECTIFICATIF TECHNIQUE 1 First Edition
ISO
15898
ISO
15899
ISO
15901-1 CORR 1
ISO
15901-1
ISO
15901-2 CORR 1
ISO
15901-2
ISO
15901-3
ISO
15902 CORR 1
ISO
ISO
15902
15903
Optics and photonics ù Diffractive optics ù Vocabulary Optique et photonique ù Optique diffractive ù Vocabulaire First Edition
Soil Quality - Format for Recording Soil and Site Information First Edition
ISO
15906
Carbonaceous materials for the production of aluminium ù Baked anodes ù Determination of the air permeability First Edition
ISO
ISO
ISO
15908
15909-1
15910
Adhesives for Thermoplastic Piping Systems - Test Method for the Determination of Thermal Stability of Adhesives First Edition
Software and system engineering High-level Petri nets Part 1: Concepts, definitions and graphical notation First Edition
Information Technology - Software User Documentation Process First Edition
ISO
15911
ISO
15912
ISO
ISO
ISO
15913
15914
15917
Petroleum Products - Estimation of Net Specific Energy of Aviation Turbine Fuels Using Hydrogen Content Data First Edition
Dentistry Casting investments and refractory die materials First Edition; Supersedes ISO 7490:2000, ISO 9694:1996, ISO
11244:1999, ISO 11245:1999 and ISO 11246:1996
Water Quality - Determination of Selected Phenoxyalkanoic Herbicides, Including Bentazones and Hydroxybenzonitriles by Gas
Chromatography and Mass Spectrometry After Solid Phase Extraction and Derivatization First Edition
Animal feeding stuffs Enzymatic determination of total starch content First Edition
Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials ù Dimensions First Edition
ISO
15919
ISO
15924
ISO
15926-1
ISO
15926-2
ISO
15927-1
ISO
15927-4
ISO
15927-5
ISO
ISO
ISO
15927-6
15928-1
15928-2
ISO
15929
ISO
15930-1
ISO
15930-3
ISO
15930-4
ISO
15930-5
ISO
15930-6
ISO
15938-1 AMD 2
ISO
15938-1 CORR 2
ISO
15938-1 CORR 1
Information and Documentation - Transliteration of Devanagari and Related Indic Scripts into Latin Characters First Edition
Information and documentation Codes for the representation of names of scripts Information et documentation Codes pour la
reprÚsentation des noms d'Úcritures First Edition
Industrial automation systems and integration Integration of life-cycle data for process plants including oil and gas production
facilities Part 1: Overview and fundamental principles First Edition
Industrial automation systems and integration Integration of life-cycle data for process plants including oil and gas production
facilities Part 2: Data model First Edition
Hygrothermal performance of buildings Calculation and presentation of climatic data Part 1: Monthly means of single meteorological
elements First Edition
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual
energy use for heating and cooling First Edition
Hygrothermal performance of buildings Calculation and presentation of climatic data Part 5: Data for design heat load for space
heating First Edition
Hygrothermal performance of buildings ù Calculation and presentation of climatic data ù Part 6: Accumulated temperature differences
(degree days) First Edition
Houses Description of performance Part 1: Structural safety First Edition
Houses Description of performance Part 2: Structural serviceability First Edition
Graphic Technology - Prepass Digital Data Exchange - Guidelines and Principles for the Development of PDF/X Standards First
Edition
Graphic Technology - Prepress Digital Data Exchange - Use of PDF - Part 1: Complete Exchange Using CMYK Data (PDF/X-1 and
PDF/X-1a) First Edition
Graphic Technology - Prepress Digital Data Exchange - Use of PDF - Part 3: Complete Exchange Suitable for Colour-Managed
Workflows (PDF/X-3)
Graphic technology Prepress digital data exchange using PDF Part 4: Complete exchange of CMYK and spot colour printing data
using PDF 1.4 (PDF/X-1a) First Edition
Graphic technology Prepress digital data exchange using PDF Part 5: Partial exchange of printing data using PDF 1.4 (PDF/X-2)
First Edition
Graphic technology Prepress digital data exchange using PDF Part 6: Complete exchange of printing data suitable for colourmanaged workflows using PDF 1.4 (PDF/X-3) First Edition
Information technology ù Multimedia content description interface ù Part 1: Systems AMENDMENT 2: Fast access extension First
Edition
Information technology ù Multimedia content description interface ù Part 1: Systems TECHNICAL CORRIGENDUM 2 First Edition
Information technology ù Multimedia content description interface ù Part 1: Systems AMENDMENT 1: Systems extensions
TECHNICAL CORRIGENDUM 1 First Edition
Information technology ù Multimedia content description interface ù Part 1: Systems AMENDMENT 1: Systems extensions First
Edition
ISO
15938-1 AMD 1
ISO
ISO
ISO
15938-1 CORR 1
15938-1
15938-2
ISO
15938-3 CORR 1
Information technology ù Multimedia content description interface ù Part 1: Systems TECHNICAL CORRIGENDUM 1 First Edition
Information technology ù Multimedia content description interface ù Part 1: Systems First Edition
Information Technology - Multimedia Content Description Interface - Part 2: Description Definition Language First Edition
Information technology ù Multimedia content description interface ù Part 3: Visual AMENDMENT 2: Perceptual 3D Shape Descriptor
TECHNICAL CORRIGENDUM 1 First Edition
ISO
ISO
ISO
15938-3 CORR 2
15938-3 AMD 2
15938-3 CORR 1
Information Technology - Multimedia Content Description Interface - Part 3: Visual AMENDMENT 1: Visual extensions First Edition
Information technology ù Coding of audio-visual objects ù Part 3: Visual AMENDMENT 2: Perceptual 3D Shape Descriptor
Information Technology - Multimedia Content Description Interface - Part 3: Visual AMENDMENT 1: Visual extensions
ISO
ISO
ISO
15938-3 AMD 1
15938-3 CORR 1
15938-3
Information Technology - Multimedia Content Description Interface - Part 3: Visual AMENDMENT 1: Visual extensions First Edition
Information Technology - Multimedia Content Description Interface - Part 3: Visual First Edition
Information Technology - Multimedia Content Description Interface - Part 3: Visual First Edition
ISO
15938-4 AMD 2
Information technology Multimedia content description interface Part 4: Audio AMENDMENT 2: High-level descriptors First Edition
ISO
ISO
ISO
15938-4 AMD 1
15938-4
15938-4 FDAM 2
ISO
15938-5 AMD 2
ISO
15938-5 CORR 1
ISO
ISO
15938-5 AMD 1
15938-5
ISO
ISO
15938-6 CORR 1
15938-6
ISO
15938-6 FDAM 1
ISO
15938-7 AMD 2
Information technology Multimedia content description interface Part 4: Audio AMENDMENT 1: Audio extensions First Edition
Information technology Multimedia content description interface Part 4: Audio First Edition
Information technology Multimedia content description interface Part 4: Audio AMENDMENT 2: High-level descriptors
Information technology ù Multimedia content description interface ù Part 5: Multimedia description schemes AMENDMENT 2:
Multimedia description schemes user preference extensions First Edition
Information technology ù Multimedia content description interface ù Part 5: Multimedia description schemes TECHNICAL
CORRIGENDUM 1 First Edition
Information technology ù Multimedia content description interface ù Part 5: Multimedia description schemes AMENDMENT 1:
Multimedia description schemes extensions First Edition
Information technology ù Multimedia content description interface ù Part 5: Multimedia description schemes First Edition
Information technology ù Multimedia content description interface ù Part 6: Reference software AMENDMENT 1: Reference software
extensions First Edition
Information technology Multimedia content description interface Part 6: Reference software First Edition
Information technology Multimedia content description interface Part 6: Reference software AMENDMENT 1: Reference software
extensions
Information technology ù Multimedia content description interface ù Part 7: Conformance testing AMENDMENT 2: Fast access
extensions conformance First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Information technology ù Multimedia content description interface ù Part 7: Conformance testing AMENDMENT 1: Conformance
extensions First Edition
Information technology ù Multimedia content description interface ù Part 7: Conformance testing First Edition
Information technology ù Multimedia content description interface ù Part 7: Conformance testing AMENDMENT 3: Conformance
15938-7 FDAM 3 testing of perceptual 3D shape descriptor
15938-9
Information technology Multimedia content description interface Part 9: Profiles and levels First Edition
15938-10 CORR 1 Information technology ù Multimedia content description Interface ù Part 10: Schema definition First edition
15938-10
Information technology Multimedia content description interface Part 10: Schema definition First edition
15939
Software Engineering Software Measurement Process First Edition
FDIS 15939
Systems and software engineering ù Measurement process
15940
Information Technology Software Engineering Environment Services First Edition
Information Technology - Business Agreement Semantic Descriptive Techniques - Part 1: Operational Aspects of Open-Edi for
15944-1
Implementation First Edition
Information technology Business Operational View Part 2: Registration of scenarios and their components as business objects First
15944-2
Edition
Information Technology - Security Techniques - Specification of TTP Services to Support the Application of Digital Signatures First
15945
Edition
15938-7 AMD 1
15938-7
ISO
15946-1
ISO
15946-2
ISO
15946-3
ISO
15946-4
ISO
15952
ISO
15953
ISO
15954
ISO
15955
Information technology Security techniques Cryptographic techniques based on elliptic curves Part 1: General First Edition
Information Technology - Security Techniques - Cryptographic Techniques Based on Elliptic Curves - Part 2: Digital Signatures First
Edition
Information Technology - Security Techniques - Cryptographic Techniques Based on Elliptic Curves - Part 3: Key Establishment First
Edition
Information technology Security techniques Cryptographic techniques based on elliptic curves Part 4: Digital signatures giving
message recovery First Edition
Soil quality Effects of pollutants on juvenile land snails (Helicidae) Determination of the effects on growth by soil contamination First
Edition
Information Technology - Open Systems Interconnection - Service Definition for the Application Service Object Association Control
Service Element First Edition
Information Technology - Open Systems Interconnection - Connection-Mode Protocol for the Application Service Object Association
Control Service Element First Edition; Replaces ISO/IEC 8650-1:1999
Information Technology - Open Systems Interconnection - Connectionless Protocol for the Application Service Object Association
Control Service Element First Edition; Replaces ISO/IEC 10035-1: 1995
ISO
15961
Information technology Radio frequency identification (RFID) for item management Data protocol: application interface First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15962
15963
15967
15968
15973
15974
15975
15976
15977
15978
15979
15980
15981
15982
15983
15984
ISO
ISO
ISO
ISO
ISO
15985
15987
15988
15989 CORR
15989
ISO
15991
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
15992
15994
15996
16000-1
16000-2
16000-3
16000-4
16000-5
Information technology Radio frequency identification (RFID) for item management Data protocol: data encoding rules and logical
memory functions First Edition
Information technology Radio frequency identification for item management Unique identification for RF tags First Edition
Direct reduced iron ù Determination of the tumble and abrasion indices of hot briquetted iron (HBI) Second Edition
Direct Reduced Iron - Determination of Apparent Density and Water Absorption of Hot Briquetted Iron (HBI) First Edition
Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - AIA/St First Edition
Closed End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/St First Edition
Closed End Blind Rivets With Break Pull Mandrel and Protruding Head - AI/AIA First Edition
Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - St/St First Edition
Open End Blind Rivets with Break Pull Mandrel and Protruding Head - AIA/St First Edition
Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/St First Edition
Open End Blind Rivets with Break Pull Mandrel and Protruding Head - St/St First Edition
Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - St/St First Edition
Open End Blind Rivets with Break Pull Mandrel and Protruding Head - AIA/AIA First Edition
Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/AIA First Edition
Open End Blind Rivets with Break Pull Mandrel and Protruding Head - A2/A2 First Edition
Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - A2/A2 First Edition
Plastics Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions
Method by analysis of released biogas First Edition
Plastics Film and sheeting Biaxially oriented polyamide (nylon) films First edition
Plastics Film and sheeting Biaxially oriented poly(ethylene terephthalate) (PET) films First Edition
Plastics Film and sheeting Measurement of water-contact angle of corona-treated films
Plastics Film and sheeting Measurement of water-contact angle of corona-treated films First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Priority Interruption and Call Priority Interruption Protection
Supplementary Services Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Priority Interruption and Call Priority Interruption Protection Supplementary Services Second
Edition
Graphic technology Testing of prints Visual lustre First Edition
Gas cylinders Residual pressure valves General requirements and type testing First edition
Indoor air Part 1: General aspects of sampling strategy First Edition
Indoor air Part 2: Sampling strategy for formaldehyde First Edition
Indoor Air - Part 3: Determination of Formaldeyhde and Other Corbonyl Compounds - Active Sampling Method First Edition
Indoor air Part 4: Determination of formaldehyde Diffusive sampling method First Edition
Indoor air ù Part 5: Sampling strategy for volatile organic compounds (VOCs) First Edition
ISO
ISO
16000-6
16000-8
ISO
16000-9 CORR 1
ISO
16000-9
ISO
16000-10
ISO
ISO
16000-11
16002
ISO
16004
ISO
ISO
ISO
16010
16012 CORR 1
16012
ISO
16014-1 CORR 1
ISO
16014-1
ISO
16014-2
ISO
16014-3
ISO
ISO
16014-4
16016
ISO
16017-1
ISO
16017-2
ISO
16020
Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA
sorbent, thermal desorption and gas chromatography using MS/FID First Edition
Indoor air ù Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions First Edition
Indoor air ù Part 9: Determination of the emission of volatile organic compounds from building products and furnishing ù Emission
test chamber method TECHNICAL CORRIGENDUM 1 First Edition
Indoor air Part 9: Determination of the emission of volatile organic compounds from building products and furnishing Emission test
chamber method First Edition
Indoor air Part 10: Determination of the emission of volatile organic compounds from building products and furnishing Emission test
cell method First Edition
Indoor air Part 11: Determination of the emission of volatile organic compounds from building products and furnishing Sampling,
storage of samples and preparation of test specimens First Edition
Stored cereal grains and pulses Guidance on the detection of infestation by live invertebrates by trapping First Edition
Aircraft ground equipment Passenger boarding bridge or transfer vehicle Requirements for interface with aircraft doors First Edition
Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids First
Edition
Plastics ù Determination of linear dimensions of test specimens TECHNICAL CORRIGENDUM 1 First Edition
Plastics ù Determination of linear dimensions of test specimens First Edition
Plastics ù Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion
chromatography ù Part 1: General principles TECHNICAL CORRIGENDUM 1 First Edition
Plastics - Determination of Average Molecular Mass and Molecular Mass Distribution of Polymers Using Size-Exclusion
Chromatography - Part 1: General Principles First Edition
Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion
chromatography Part 2: Universal calibration method First Edition
Plastics - Determination of Average Molecular Mass and Molecular Mass Distribution of Polymers Using Size-Exclusion
Chromatography - Part 3: Low-Temperature Method First Edition
Plastics - Determination of Average Molecular Mass and Molecular Mass Distribution of Polymers Using Size-Exclusion
Chromatography - Part 4: High-Temperature Method First Edition
Technical Product Documentation - Protection Notices for Restricting the Use of Documents and Products First Edition
Indoor, Ambient and Workplace Air - Sampling and Analysis of Volatile Organic Compounds by Sorbent Tube/Thermal
Desorption/Capillary Gas Chromatography - Part 1: Pumped Sampling First Edition
Indoor, Ambient and Workplace Air - Sampling and Analysis of Volatile Organic Compounds by Sorbent Tube/Thermal
Desorption/Capillary Gas Chromatography - Part 2: Diffusive Sampling First Edition
Steel for the reinforcement and prestressing of concrete Vocabulary Aciers pour l'armature et la prÚcontrainte du bÚton Vocabulaire
First Edition
ISO
16021
ISO
ISO
ISO
16022
16023
16024
ISO
16028
ISO
ISO
16028 FDAM 1
16030
ISO
16031-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
16031-2
16032
16034 CORR 1
16034
16035
16037
16038
16039
16042
16047
16048
16049-1
16049-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
16050
16053
16054
16055
16057
16061
16063-1
Urine-Absorbing Aids - Basic Principles for Evaluation of Single-Use Adult-Incontinence-Absorbing Aids from the Perspective of
Users and Caregivers First Edition
Information technology Automatic identification and data capture techniques Data Matrix bar code symbology specification Second
Edition
Information Technology - International Symbology Specification - MaxiCode First Edition
Personal protective equipment for protection against falls from a height Flexible horizontal lifeline systems First Edition
Hydraulic Fluid Power - Flush-Face Type, Quick-action Couplings for Use at Pressures of 20 MPa (200 Bar) to 31, 5 MPa (315 Bar) Specifications First Edition; Amendment 1: 01/15/2006
Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31, 5 MPa (315 bar) Specifications - First Edition; Amendment 1:9/20/2005
Pneumatic Fluid Power - Connections - Ports and Stud Ends First Edition; Amendment 1: 4/1/2005
Aerospace Fluid Systems - O-Rings, Inch Series: Inside Diameters and Cross Sections, Tolerances and Size-Identification Codes Part 1: Close Tolerances for Hydraulic Systems First Edition
Aerospace fluid systems O-rings, inch series: Inside diameters and cross sections, tolerances and size identification codes Part 2:
Standard tolerances for non-hydraulic systems First Edition
Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method First Edition
Ophthalmic optics ù Specifications for single-vision ready-to-wear near-vision spectacles First Edition
Ophthalmic optics ù Specifications for single-vision ready-to-wear near-vision spectacles First Edition
Animal and Vegetable Fats and Oils - Determination of Low-Boiling Halogenated Hydrocarbons in Edible Oils First Edition
Rubber Condoms for Clinical Trials - Measurement of Physical Properties First Edition
Rubber condoms Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms First Edition
Road construction and maintenance equipment Slipform pavers Definitions and commercial specifications First Edition
Iron ores ù Guidelines for the use of certified reference materials (CRMs) First Edition
Fasteners Torque/clamp force testing First Edition
Passivation of Corrosion-Resistant Stainless-Steel Fasteners First Edition
Air Cargo Equipment - Restraint Straps - Part 1: Design Criteria and Testing Methods First Edition
Air cargo equipment Restraint straps Part 2: Utilization guidelines and lashing calculations First Edition
Foodstuffs Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products
High-performance liquid chromatographic method First Edition
Paints and varnishes Coating materials and coating systems for exterior wood Natural weathering test First Edition
Implants for Surgery - Minimum Data Sets for Surgical Implants First Edition
Tobacco and Tobacco Products - Monitor Test Piece - Requirements and Use First Edition
Coated Abrasives - Vulcanized Fibre Discs First Edition
Instrumentation for Use in Association with Non-Active Surgical Implants - General Requirements First Edition
Methods for the Calibration of Vibration and Shock Transducers - - Part 1: Basic Concepts First Edition
ISO
16063-11
ISO
16063-12
ISO
16063-13
ISO
16063-15
ISO
16063-21
ISO
ISO
ISO
16063-22
16065-1
16065-2
ISO
16067-1
ISO
ISO
ISO
ISO
ISO
ISO
16067-2
16069
16070
16072
16085
16091
ISO
16100-1
ISO
16100-2
ISO
16100-3
ISO
ISO
ISO
ISO
16100-4
16101
16103
16104
ISO
16106
Methods for the Calibration of Vibration and Shock Tranducers - Part 11: Primary Vibration Calibration by Laser Interferometry First
Edition; Replaces ISO 5347-1
Methods for the Calibration of Vibration and Shock Transducers - Part 12: Primary Vibration Calibration by the Reciprocity Method
First Edition
Methods for the Calibration of Vibration and Shock Tranducers - Part 13: Primary Shock Calibration by Laser Interferometry First
Edition
Methods for the calibration of vibration and shock transducers Part 15: Primary angular vibration calibration by laser interferometry
First Edition
Methods for the calibration of vibration and shock transducers Part 21: Vibration calibration by comparison to a reference transducer
First Edition
Methods for the calibration of vibration and shock transducers Part 22: Shock calibration by comparison to a reference transducer
First Edition; Supersedes ISO 5347-4
Pulps - Determination of Fibre Length by Automated Optical Analysis - Part 1: Polarized Light Method First Edition
Pulps ù Determination of fibre length by automated optical analysis ù Part 2: Unpolarized light method First Edition
Photography Spatial resolution measurements of electronic scanners for photographic images Part 1: Scanners for reflective media
First Edition
Photography Electronic scanners for photographic images Spatial resolution measurements Part 2: Film scanners First Edition
Graphical symbols Safety signs Safety way guidance systems (SWGS) First Edition
Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples Second Edition
Soil quality Laboratory methods for determination of microbial soil respiration First Edition
Systems and software engineering Life cycle processes Risk management Second Edition; IEEE Std 16085-2006
Space Systems - Integrated Logistic Support First Edition
Industrial automation systems and intergration - Manufacturing software capability profiling for interoperability - Part1: Framework
First edition
Industrial automation systems and integration Manufacturing software capability profiling for interoperability Part 2: Profiling
methodology First Edition
Industrial automation systems and integration Manufacturing software capability profiling for interoperability Part 3: Interface
services, protocols and capability templates First Edition
Industrial automation systems and integration Manufacturing software capability profiling for interoperability Part 4: Conformance
test methods, criteria and reports First Edition
Packaging Transport packaging for dangerous goods Plastics compatibility testing First Edition
Packaging Transport packaging for dangerous goods Recycled plastics material First Edition
Packaging Transport packaging for dangerous goods Test methods First Edition
Packaging Transport packages for dangerous goods Dangerous goods packagings, intermediate bulk containers (IBCs) and large
packagings Guidelines for the application of ISO 9001 First Edition
ISO
ISO
ISO
ISO
16107
16112
16120-1
16120-2
ISO
ISO
16120-3
16120-4
ISO
ISO
16121-1
16121-2
ISO
16121-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
16121-4
16124
16132
16133
16135
16136
16137
16138
16139
16140
16143-1
16143-2
16143-3
16147
16148
ISO
16149
ISO
ISO
16151
16152
ISO
ISO
16154
16155
Workplace Atmospheres - Protocol for Evaluating the Performance of Diffusive Samplers First Edition
Compacted (vermicular) graphite cast irons Classification First Edition
Non-alloy steel wire rod for conversion to wire Part 1: General requirements First Edition
Non-alloy steel wire rod for conversion to wire Part 2: Specific requirements for general purpose wire rod First Edition
Non-alloy steel wire rod for conversion to wire Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire
rod First Edition
Non-alloy steel wire rod for conversion to wire Part 4: Specific requirements for wire rod for special applications First Edition
Road vehicles - Ergonomic requirements for the driver s workplace in line-service buses - Part 1: General description, basic
requirements First Edition
Road vehicles - Ergonomic requirements for the driver s workplace in line-service buses - Part 2: Visibility First Edition
Road vehicles Ergonomic requirements for the driver s workplace in line-service buses Part 3: Information devices and controls
First Edition
Road vehicles Ergonomic requirements for the driver s workplace in line-service buses Part 4: Cabin environment First Edition
Steel wire rod Dimensions and tolerances First Edition; Replaces ISO 8457-1: 1989
Ductile iron pipes and fittings Seal coats for cement mortar linings First Edition
Soil quality Guidance on the establishment and maintenance of monitoring programmes First Edition
Industrial valves - Ball valves of thermoplastics materials First Edition
Industrial valves Butterfly valves of thermoplastics materials First Edition
Industrial valves Check valves of thermoplastics materials First Edition
Industrial valves Diaphragm valves of thermoplastics materials First Edition
Industrial valves Gate valves of thermoplastics materials First Edition
Microbiology of food and animal feeding stuffs Protocol for the validation of alternative methods First Edition
Stainless steels for general purposes Part 1: Flat products First Edition
Stainless steels for general purposes Part 2: Semi-finished products, bars, rods and sections First Edition
Stainless steels for general purposes Part 3: Wire First edition
Small Craft - Inboard Diesel Engines - Engine-Mounted Fuel and Electrical Components First Edition
Gas cylinders Refillable seamless steel gas cylinders Acoustic emission testing (AT) for periodic inspection First Edition
Agricultural irrigation equipment PVC above-ground low-pressure pipe for surface irrigation Specifications and test methods First
Edition
Corrosion of metals and alloys Accelerated cyclic tests with exposure to acidified salt spray, dry and wet conditions First Edition
Plastics - Determination of xylenesoluble matter in polypropylene First Edition; Replaces ISO 6427
Tractors and machinery for agriculture and forestry Installation of lighting, light signalling and marking devices for travel on public
roadways First Edition
Ships and marine technology Computer applications Shipboard loading instruments First Edition
ISO
ISO
ISO
ISO
ISO
ISO
16156
16160
16162
16163
16165
16172
ISO
ISO
16183
16185
ISO
16200-1
ISO
ISO
16200-2
16201
ISO
ISO
ISO
ISO
16220 AMD 1
16220
16221
16232-1
ISO
16232-2
ISO
16232-3
ISO
16232-4
ISO
16232-5
ISO
16232-6
ISO
16232-7
ISO
16232-8
ISO
ISO
16232-9
16232-10
Machine-tools safety Safety requirements for the design and construction of work holding chucks First Edition
Continuously hot-rolled steel sheet products Dimensional and shape tolerances Second Edition
Continuously cold-rolled steel sheet products Dimensional and shape tolerances Second Edition
Continuously hot-dipped coated steel sheet products Dimensional and shape tolerances Second Edition
Ships and Marine Technology - Marine Environment Protection - Terminology Relating to Oil Spill Response First Edition
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe First Edition
Heavy-duty engines Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow
dilution systems under transient test conditions First Edition
Road Vehicles - Engine Families for Certification of Heavy-Duty Vehicles - Exhaust Emissions First Edition
Workplace air quality Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography Part 1:
Pumped sampling method First Edition
Workplace Air Quality - Sampling and Analysis of Voltage Organic Compounds by Solvent Desorption/Gas Chromatography - Part 2:
Diffusive Sampling Method First Edition
Technical aids for persons with disability Environmental control systems for daily living First Edition
Magnesium and magnesium alloys ù Magnesium alloy ingots and castings AMENDMENT 1: Additional alloys Second Edition
Magnesium and magnesium alloys Magnesium alloy ingots and castings Second Edition
Water Quality - Guidance for Determination of Biodegradability in the Marine Environment First Edition
Road vehicles ù Cleanliness of components of fluid circuits ù Part 1: Vocabulary First Edition
Road vehicles ù Cleanliness of components of fluid circuits ù Part 2: Method of extraction of contaminants by agitation First Edition
Road vehicles ù Cleanliness of components of fluid circuits ù Part 3: Method of extraction of contaminants by pressure rinsing First
Edition
Road vehicles ù Cleanliness of components of fluid circuits ù Part 4: Method of extraction of contaminants by ultrasonic techniques
First Edition
Road vehicles ù Cleanliness of components of fluid circuits ù Part 5: Method of extraction of contaminants on functional test bench
First Edition
Road vehicles - anliness of components of fluid circuits - t 6: Particle mass determination by gravimetric analysis FIRST EDITION
Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis FIRST
EDITION
Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis FIRST
EDITION
Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle
counter FIRST EDITION
Road vehicles ù Cleanliness of components of fluid circuits ù Part 10: Expression of results First Edition
Heavy commercial vehicles and buses Straight-ahead braking on surfaces with split coefficient of friction Open-loop test method
First Edition
ISO
16234
ISO
16240
ISO
ISO
ISO
ISO
ISO
ISO
16241
16246
16247
16262
16264
16266
ISO
ISO
ISO
16269-6
16269-7
16269-8
ISO
16273
ISO
16276-1
ISO
ISO
ISO
ISO
16276-2
16284
16287
16305
ISO
16312-1
Water quality Determination of the genotoxicity of water and waste water Salmonella/microsome test (Ames test) First edition
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) First
Edition
Road vehicles M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing First Edition
Road vehicles Detection of exhaust system leaks Helium test method and detection device specification First Edition
Information Technology - ECMAScript Language Specification Second Edition
Water Quality - Determination of Soluble Silicates by Flow Analysis (FIA and CFA) and Photometric Detection First Edition
Water quality Detection and enumeration of Pseudomonas aeruginosa Method by membrane filtration First Edition
Statistical interpretation of data Part 6: Determination of statistical tolerance intervals First edition; Cancels and Replaces ISO
3207:1975
Statistical Interpretation of Data - Part 7: Median - Estimation and Confidence Intervals First Edition
Statistical interpretation of data Part 8: Determination of prediction intervals First Edition
Ships and marine technology Night vision equipment for high-speed craft Operational and performance requirements, methods of
testing and required test results First Edition
Corrosion protection of steel structures by protective paint systems ù Assessment of, and acceptance criteria for, the
adhesion/cohesion (fracture strength) of a coating ù Part 1: Pull-off testing First Edition
Corrosion protection of steel structures by protective paint systems ù Assessment of, and acceptance criteria for, the
adhesion/cohesion (fracture strength) of a coating ù Part 2: Cross-cut testing and X-cut testing First Edition
Ophthalmic optics Information interchange for ophthalmic optical equipment Second Edition
Plain bearings Thermoplastic bushes Dimensions and tolerances First Edition
Butter Determination of firmness First Edition
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment
Part 1: Criteria First Edition;: 2004 [Replaced: ISO TS 16312-1]
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
16322-1
16322-2
16322-3
16328
16329
16330
16333
16348
Textiles Determination of spirality after laundering Part 1: Percentage of wale spirality change in knitted garments First Edition
Textiles Determination of spirality after laundering Part 2: Woven and knitted fabrics First Edition
Textiles Determination of spirality after laundering Part 3: Woven and knitted garments First Edition
Ships and marine technology Gyro-compasses for high-speed craft First Edition
Ships and Marine Technology - Heading Control Systems for High-Speed Craft First Edition
Reciprocating positive displacement pumps and pump units Technical requirements First Edition
Heavy commercial vehicles and buses Steady-state rollover threshold Tilt-table test method First Edition
Metallic and other inorganic coatings Definitions and conventions concerning appearance First Edition
ISO
ISO
ISO
ISO
ISO
ISO
16362
16366
16367
16368
16369
16382
ISO
ISO
ISO
ISO
ISO
16387
16391
16408
16409
16412
ISO
ISO
16422
16426
ISO
16428
ISO
16429
ISO
ISO
ISO
16432
16433
16434
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
16446
16448
16449
16458
16462
16463
16467
16468
16472
16484-2
16484-3
Ambient air Determination of particlephase polycyclic aromatic hydrocarbons by high performance liquid chromatography First
Edition
Tools for Pressing - L-Shaped Guides First Edition
Tools for Pressing - Guide Plates - U- and V-Blocks First Edition
Mobile elevating work platforms Design calculations, safety requirements and test methods First Edition
Elevating Work Platforms - Mast-Climbing Work Platforms First Edition
Information Technology - Data Interchange on 12,7 mm 208-Track Magnetic Tape Cartridges - DLT 6 Format First Edition
Soil quality Effects of pollutants on Enchytraeidae (Enchytraeus sp.) Determination of effects on reproduction and survival First
Edition
Aids for Ostomy and Incontinence - Irrigation Sets - Requirements and Test Methods First Edition
Dentistry Oral hygiene products Oral rinses
Dentistry Oral hygiene products Manual interdental brushes First Edition
Air cargo equipment Air cargo pallets Utilization guidelines First edition
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure
Specifications First Edition
Fasteners Quality assurance system First Edition
Implants for surgery Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and
medical devices First edition
Implants for surgery Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and
medical devices over extended time periods First Editon
Resistance welding Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) First
Edition
Resistance welding Procedure for seam welding of uncoated and coated low carbon steels First Edition
Earthquake- and Subsidence-Resistant Design of Ductile Iron Pipelines First Edition
Ships and Marine Technology - Marine Environmental Protection - Adaptor for Joining Dissimilar Boom Connectors First Edition
Information Technology - 120 mm DVD - Read-Only Disk Second Edition
Information Technology - 80 mm DVD - Read-Only Disk Second Edition
Space systems Unmanned spacecraft transportation General requirements First Edition
Cubic boron nitride inserts, tipped or solid Dimensions, types First Edition
Polycrystalline diamond inserts, tipped Dimensions, types First Edition
Packaging Transport packages for dangerous goods Test methods for IBCs
Investment castings (steel, nickel alloys and cobalt alloys) General technical requirements First Edition
Animal feeding stuffs Determination of amylase-treated neutral detergent fibre content (aNDF) First Edition
Building automation and control systems (BACS) Part 2: Hardware First Edition
Building automation and control systems (BACS) Part 3: Functions First Edition
ISO
ISO
ISO
16484-5
16484-6
16485
Building automation and control systems ù Part 5: Data communication protocol Second Edition
Building automation and control systems (BACS) Part 6: Data communication conformance testing First Edition
Information Technology - Mixed Raster Content (MRC) First Edition
ISO
16500-1
ISO
ISO
16500-2
16500-3
Information Technology - Generic Digital Audio-Visual Systems - Part 1: System Reference Models and Scenarios First Edition
Information Technology - Generic Digital Audio-Visual Systems - Part 2: System Dynamics, Scenarios and Protocol Requirements
First Edition
Information Technology - Generic Digital Audio-Visual Systems - Part 3: Contours: Technology Domain First Edition
ISO
ISO
ISO
ISO
16500-4
16500-5
16500-6
16500-7
Information Technology - Generic Digital Audio-Visual Systems - Part 4: Lower-Layer Protocols and Physical Interfaces First Edition
Information Technology - Generic Digital Audio-Visual Systems - Part 5: High and Mid-Layer Protocols First Edition
Information Technology - Generic Digital Audio-Visual Systems- Part 6: Information Presentation First Edition
Information Technology - Generic Digital Audio-Visual Systems - Part 7: Basic Security Tools First Edition
ISO
ISO
16500-8
16500-9
ISO
ISO
ISO
ISO
ISO
16508
16509
16512-1
16513
16528-1
ISO
ISO
ISO
16528-2
16532-2
16549
ISO
16564 AMD 1
ISO
16564
ISO
ISO
ISO
ISO
ISO
16565
16582
16583
16584
16585
Information Technology - Generic Digital Audio-Visual Systems - Part 8: Management Architecture and Protocols First Edition
Information Technology - Generic Digital Audio-Visual Systems - Part 9: Usage Information Protocols First Edition
Road Traffic Lights - Photometric Properties of 200 mm Roundel Signals First Edition; CIE S 006.1/E; Corrected and Reprinted: 1115-2000
Information Technology - Year 2000 Terminology First Edition; IEEE Std 2000.1
Information technology Relayed Multicast Control Protocol (RMCP) Part 1: Framework First Edition
Information technology Group management protocol First Edition
Boilers and pressure vessels ù Part 1: Performance requirements First edition [Superseded: ISO TS 16528]
Boilers and pressure vessels ù Part 2: Procedures for fulfilling the requirements of ISO 16528-1 First Edition [Superseded: ISO TS
16528]
Paper and board ù Determination of grease resistance ù Part 2: Surface repellency test First Edition
Textiles Unevenness of textile strands Capacitance method First Edition; Replaces ISO 2649
Rubber, raw natural ù Determination of average molecular mass and molecularmass distribution by size exclusion chromatography
(SEC) AMENDMENT 1 First Edition
Rubber, raw natural ù Determination of average molecular mass and molecularmass distribution by size exclusion chromatography
(SEC) First Edition
Rubber - Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM)
Terpolymers First Edition
Open End Blind Rivets with Break Pull Mandrel and Protruding Head - Cu/SST First Edition
Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Cu/St or Cu/Br or Cu/SSt First Edition
Open End Blind Rivets with Break Pull Mandrel and Protruding Head - NiCu/St OR NiCu/SSt First Edition
Closed End Blind Rivets with Pull Mandrel and Protruding Head - A2/SSt First Edition
ISO
ISO
ISO
ISO
16586
16587
16588 AMD 1
16588
ISO
16589-1
Soil Quality - Determination of Soil Water Content as a Volume Fraction on the Basis of Known Dry Bulk Density - Gravimetric
Method First Edition
Mechanical vibration and shock Performance parameters for condition monitoring of structures First Edition
Water quality ù Determination of six complexing agents ù Gas-chromatographic method AMENDMENT 1 First Edition
Water quality Determination of six complexing agents Gas-chromatographic method First Edition
Rotary Shaft Lip-Type Seals Incorporating Thermoplastic Sealing Elements - Part 1: Nominal Dimensions and Tolerances First
Edition
ISO
16589-2
Rotary Shaft Lip-Type Seals Incorporating Thermoplastic Sealing Elements - Part 2: Vocabulary Bagues D Etancheite a Levres Pour
Arbres Tournants Incorporant Des Elements D Etancheite Thermoplastiques - Partie 2: Vocabulaire First Edition
ISO
16589-3
Rotary Shaft Lip-Type Seals Incorporating Thermoplastic Sealing Elements - Part 3: Storage, Handling and Installation First Edition
ISO
16589-4
Rotary Shaft Lip-Type Seals Incorporating Thermoplastic Sealing Elements - Part 4: Performance Test Procedures First Edition
ISO
ISO
16589-5
16590
ISO
16592
ISO
16603
ISO
16604
ISO
ISO
ISO
ISO
ISO
16609
16612-1
16622
16632
16642
ISO
16649-1
Rotary Shaft Lip-Type Seals Incorporating Thermoplastic Sealing Elements - Part 5: Identification of Visual Imperfections First Edition
Water Quality - Determination of Mercury - Methods Involving Enrichment by Amalgamation First Edition
Microbeam analysis Electron probe microanalysis Guidelines for determining the carbon content of steels using a calibration curve
method First Edition
Clothing for protection against contact with blood and body fluids Determination of the resistance of protective clothing materials to
penetration by blood and body fluids Test method using synthetic blood First Edition
Clothing for protection against contact with blood and body fluids Determination of resistance of protective clothing materials to
penetration by blood-borne pathogens Test method using Phi-X174 bacteriophage First Edition
Banking Requirements for message authentication using symmetric techniques First Edition; Replaces ISO 8730:1990, ISO 87311:1987, ISO 8731-2:1992 and ISO 9807:1991
Graphic technology Variable printing data exchange Part 1: Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005) First Edition
Meteorology - Sonic Anemometers/Thermometers - Acceptance Test Methods for Mean Wind Measurements First Edition
Tobacco and Tobacco Products - Determination of Water Content - Gas-Chromatographic Method First Edition
Computer Applications in Terminology - Terminological Markup Framework First Edition
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of B-Glucuronidase-Positive Escherichia
Coli - Part 1: Colony-Count Technique at 44 Degrees C Using Membranes and 5-Bromo-4-Chloro-3-Indolyl B-D-Glucuronide First
Edition
ISO
ISO
16649-2
16650
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of B-Glucuronidase-Positive Escherichia
Coli - Part 2: Colony-Count Technique at 44 Degrees C Using 5-Bromo-4-Chloro-3-Indolyl B-D-Glucuronide First Edition
Bead wire First Edition
ISO
16654
ISO
ISO
ISO
16656
16657
16663-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
16663-2 CORR 1
16663-2
16664
16665
16670
16671
16672
ISO
ISO
16673
16700
ISO
16701
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
16702
16703
16708
16712
16720
16734
16735
16736
16737
ISO
ISO
16740
16750-1
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Detection of Escherichia Coli O157 First Edition
Hydraulic fluid power Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) Mounting
dimensions First Edition
Sensory analysis Apparatus Olive oil tasting glass First Edition
Fishing Nets - Method of Test for the Determination of Mesh Size - Part 1: Opening of Mesh First Edition
Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh TECHNICAL CORRIGENDUM 1 First
edition
Fishing Nets - Method of Test for the Determination of Mesh Size - Part 2: Length of Mesh First Edition
Gas analysis Handling of calibration gases and gas mixtures Guidelines First Edition
Water quality Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna First Edition
Timber structures Joints made with mechanical fasteners Quasi-static reversed-cyclic test method First Edition
Ophthalmic implants Irrigating solutions for ophthalmic surgery First Edition
Ophthalmic Implants - Ocular Endotamponades First Edition
Road vehicles ù Ergonomic aspects of transport information and control systems ù Occlusion method to assess visual demand due
to the use of invehicle systems First edition
Microbeam analysis Scanning electron microscopy Guidelines for calibrating image magnification First Edition
Corrosion of metals and alloys Corrosion in artificial atmosphere Accelerated corrosion test involving exposure under controlled
conditions of humidity cycling and intermittent spraying of a salt solution First Edition
Workplace Air Quality - Determination of Total Isocyanate Groups in Air Using 2-(1-Methoxyphenyl) Piperazine and Liquid
Chromatography First Edition
Soil quality Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography First Edition
Petroleum and natural gas industries Pipeline transportation systems Reliability-based limit state methods First edition
Water quality Determination of acute toxicity of marine or estuarine sediment to amphipods First Edition
Soil quality Pretreatment of samples by freeze-drying for subsequent analysis First edition
Fire safety engineering Requirements governing algebraic equations Fire plumes First Edition
Fire safety engineering Requirements governing algebraic equations Smoke layers First Edition
Fire safety engineering Requirements governing algebraic equations Ceiling jet flows First Edition
Fire safety engineering Requirements governing algebraic equations Vent flows First Edition
Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and
spectrophotometric measurement using diphenyl carbazide First Edition
Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General Second Edition
ISO
16750-2
Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 2: Electrical loads Second Edition
ISO
16750-3
Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 3: Mechanical loads First Edition
ISO
16750-4
Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 4: Climatic loads Second Edition
ISO
ISO
16750-5
16770
ISO
16772
ISO
16773-1
ISO
16773-2
ISO
16784-1
ISO
ISO
ISO
16784-2
16790
16792
Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 5: Chemical loads First Edition
Plastics Determination of environmental stress cracking (ESC) of polyethylene Full-notch creep test (FNCT) First Edition
Soil quality Determination of mercury in aqua regia soil extracts with coldvapour atomic spectrometry or coldvapour atomic
fluorescence spectrometry First Edition
Paints and varnishes ù Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens ù Part 1: Terms and
definitions First Edition
Paints and varnishes ù Electrochemical impedance spectroscopy (EIS) on highimpedance coated specimens ù Part 2: Collection of
data First Edition
Corrosion of metals and alloys Corrosion and fouling in industrial cooling water systems Part 1: Guidelines for conducting pilot-scale
evaluation of corrosion and fouling control additives for open recirculating cooling water systems First Edition
Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of
cooling water treatment programmes using a pilot-scale test rig First Edition
Plastics Determination of drawing characteristics of thermoplastics in the molten state First Edition
Technical product documentation Digital product definition data practices First Edition
ISO
16793
Nuclear fuel technology Guide for ceramographic preparation of UO2 sintered pellets for microstructure examination First Edition
ISO
ISO
16794
16795
ISO
16796
Nuclear Energy - Determination of Carbon Compounds and Fluorides in Uranium Hexafluoride Infrared Spectrometry First Edition
Nuclear energy Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry First Edition
Nuclear energy Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission
spectrometry using an inductively coupled plasma source (ICP-AES) First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
16797
16798
16805
16812
16813
16820
16824
16825
16832
16833
Nuclear energy Soxhlet-mode chemical durability test Application to vitrified matrixes for high-level radioactive waste First Edition
Links of Grade 8 for use with slings First Edition
Binders for paints and varnishes Determination of glass transition temperature First Edition
Petroleum, petrochemical and natural gas industries ù Shell-and-tube heat exchangers Second Edition
Building environment design Indoor environment General principles First Edition
Sensory analysis Methodology Sequential analysis First Edition
Information Technology - 120 mm DVD Rewritable Disk (DVD-RAM) First Edition
Information Technology - Case for 120 mm DVD-RAM Disks First Edition
Acoustics Loudness scaling by means of categories First Edition
Road vehicles Wheels Measurement of radial and lateral run-out First Edition
ISO
16834
ISO
16840-1
ISO
16840-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
16840-3
16844-1
16844-2
16844-3 CORR 1
16844-3
16844-4
16844-5
16844-6
16844-7
16845
16850
16851
16853
ISO
ISO
ISO
ISO
16854
16860
16862
16869
ISO
ISO
ISO
ISO
16871
16873 AMD 1
16873
16874
ISO
ISO
ISO
16875
16881-1
16883
ISO
16889
Welding consumables Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels Classification
First Edition
Wheelchair seating Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support
surfaces First Edition
Wheelchair seating - Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity Seat cushions First Edition
Wheelchair seating Part 3: Determination of static, impact and repetitive load strengths for postural support devices First Edition
Road Vehicles - Tachograph Systems - Part 1: Electrical Connectors First Edition; Corrigendum 1: 1/15/2005
Road vehicles Tachograph systems Part 2: Recording unit, electrical interface First Edition
Road vehicles ù Tachograph system ù Part 3: Motion sensor interface TECHNICAL CORRIGENDUM 1 First Edition
Road vehicles ù Tachograph systems ù Part 3: Motion sensor interface First Edition
Road vehicles Tachograph systems Part 4: CAN interface First Edition
Road vehicles Tachograph systems Part 5: Secured CAN interface First Edition
Road vehicles Tachograph systems Part 6: Diagnostics First Edition
Road vehicles Tachograph systems Part 7: Parameters First Edition
Road vehicles - Controller area network (CAN) - Conformance test plan First Edition
Road vehicles ù Pedestrian protection ù Child head impact test method First Edition
Textile conveyor belts Determination of the net length of an endless (spliced) conveyor belt First Edition
Textile machinery Sliver cans, rectangular Main dimensions and tolerances First Edition
Textile machinery Ring twisting machines Vocabulary MatÚriel pour l'industrie textile Machines Ó retordre Ó anneaux Vocabulaire
First Edition
Hydraulic fluid power Filters Test method for differential pressure devices First Edition
Paints and varnishes Evaluation of sag resistance First Edition
Plastics - Assessment of the Effectiveness of Fungistatic Compounds in Plastics Formulations First Edition
Plastics piping and ducting systems Plastics pipes and fittings Method for exposure to direct (natural) weathering First Edition
Hydraulic fluid power ù Pressure switches ù Mounting surfaces AMENDMENT 1 First Edition
Hydraulic fluid power ù Pressure switches ù Mounting surfaces First Edition
Hydraulic fluid power Identification of manifold assemblies and their components First Edition
Textile machinery Ring spinning machines for cotton spinning Vocabulary MatÚriel pour l'industrie textile Machines de filature Ó
anneaux pour le coton Vocabulaire First Edition
Cranes Design calculation for rail wheels and associated trolley track supporting structure Part 1: General First edition
Packaging ù Transport packages for dangerous goods ù Test methods for large packagings First Edition
Hydraulic Fluid Power Filters - Multi-Pass Method for Evaluating Filtration Performance of a Filter Element First Edition; Replaces ISO
4572: 1981; Supersedes (NFPA) T3.10.8.18
ISO
ISO
ISO
16902-1
16915
16916
ISO
16929
ISO
ISO
ISO
ISO
ISO
ISO
16931
16932
16933
16934
16935
16936-1
ISO
ISO
16936-2
16936-3
ISO
16936-4
ISO
16962
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
16969
16978
16979
16981
16983
16984
16985
16987
16992
16998
16999
ISO
17000
ISO
17011
Hydraulic fluid power Test code for the determination of sound power levels using sound intensity techniques: Engineering method
Part 1: Pumps First Edition
Tools for moulding Sprue pullers First Edition
Tools for moulding Tool specification sheet for injection moulds First Edition
Plastics Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilotscale test
First edition
Animal and Vegetable Fats and Oils - Determination of Polymerized Triglycerides Content by High-Performance Size-Exclusion
Chromatography (HPSEC) First Edition
Glass in building - Destructive-windstorm-resistant security glazing - Test and classification First Edition
Glass in building ù Explosion-resistant security glazing ù Test and classification for arena air-blast loading First edition
Glass in building - Explosion-resistant security glazing - Test and classification by shock-tube loading First Edition
Glass in building ù Bullet-resistant security glazing ù Test and classification First edition
Glass in building Forced-entry security glazing Part 1: Test and classification by repetitive ball drop First Edition
Glass in building Forced-entry security glazing Part 2: Test and classification by repetitive impact of a hammer and axe at room
temperature First Edition
Glass in building Forced-entry security glazing Part 3: Test and classification by manual attack First Edition
Glass in building Forced-entry security glazing Part 4: Test and classification by pendulum impact under thermally and fire stressed
conditions First Edition
Surface chemical analysis Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge opticalemission
spectrometry First Edition
Information Technology - Data Interchange on 120 mm Optical Disk Cartridges Using +RW Format - Capacity: 3,0 Gbytes and 6,0
Gbytes First Edition
Wood-based panels Determination of modulus of elasticity in bending and of bending strength First Edition
Wood-based panels Determination of moisture content First Edition
Wood-based panels Determination of surface soundness First Edition
Wood-based panels Determination of swelling in thickness after immersion in water First Edition
Wood-based panels Determination of tensile strength perpendicular to the plane of the panel First Edition
Wood-based panels Determination of dimensional changes associated with changes in relative humidity First Edition
Wood-Based Panels - Determination of Moisture Resistance Under Cyclic Test Conditions First Edition
Passenger car tyres Spare unit substitutive equipment (SUSE) First Edition
Wood-based panels Determination of moisture resistance Boil test First Edition
Wood-based panels Sampling and cutting of test pieces First Edition
Conformity assessment Vocabulary and general principles valuation de la conformitÚ - Vocabulaire et principes gÚnÚraux First
Edition
Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies First Edition;
Corrected Version 2/15/2005; Replaces ISO Guide 58:1993, ISO Guide 61:1996, ISO TR 17010:1998
ISO
17020
ISO
ISO
17021
17024
ISO
ISO
ISO
17025 CORR 1
17025
17030
ISO
17040
ISO
17050-1
ISO
17050-2
ISO
ISO
ISO
ISO
17052
17053
17057
17058
ISO
17059
ISO
ISO
ISO
ISO
ISO
17063
17064
17070
17071
17074
ISO
ISO
17076
17078-1
ISO
17080
ISO
ISO
17081
17082
General Criteria for the Operation of Various Types of Bodies Performing Inspection First Edition [Superseded: ISO GUIDE 39]
Conformity assessment Requirements for bodies providing audit and certification of management systems First Edition; Replaces
ISO/IEC Guide 62:1996 and ISO/IEC Guide 66:1999
Conformity Assessment - General Requirements for Bodies Operating Certification of Persons First Edition
General requirements for the competence of testing and calibration laboratories TECHNICAL CORRIGENDUM 1 Second edition
General requirements for the competence of testing and calibration laboratories Second edition
Conformity assessment General requirements for third-party marks of conformity First Edition
Conformity assessment General requirements for peer assessment of conformity assessment bodies and accreditation bodies First
Edition
Conformity assessment Supplier s declaration of conformity Part 1: General requirements First Edition; Replaces ISO Guide 22:
1996
Conformity assessment Supplier's declaration of conformity Part 2: Supporting documentation First Edition; Replaces ISO Guide 22:
1996
Rubber, raw ù Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas
chromatography ù Thermal desorption (dynamic headspace) method First Edition
Steel and iron Determination of oxygen Infrared method after fusion under inert gas First Edition
Aerospace - Rivets, Solid - Test Method First Edition
Steel and iron Determination of arsenic content Spectrophotometric method First Edition
Oilseeds ù Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid
method) First Edition
Earth-moving machinery Braking systems of pedestrian-controlled machines Performance requirements and test procedures First
Edition
Wood-based panels Fibreboard, particleboard and oriented strand board (OSB) Vocabulary First Edition
Leather Chemical tests Determination of pentachlorophenol content First Edition
Leather Physical and mechanical tests Determination of fogging characteristics First Edition; IULTCS/IUP 46
Leather Physical and mechanical tests Determination of resistance to horizontal spread of flame First Edition
Leather Physical and mechanical tests Determination of abrasion resistance of automotive leather First Edition; IULTCS/IUP 48
Petroleum and natural gas industries Drilling and production equipment Part 1: Side-pocket mandrels First Edition
Manually portable agricultural and forestry machines and powered lawn and garden equipment Design principles for single-panel
product safety labels First Edition
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an
electrochemical technique First Edition
Pneumatic fluid power Valves Data to be included in supplier literature First Edition
ISO
17087
ISO
ISO
ISO
ISO
ISO
17092
17101
17103
17115
17120
ISO
17121
ISO
17123-1
ISO
17123-2
ISO
17123-3
ISO
17123-4
ISO
17123-5
ISO
17123-6
ISO
17123-7
ISO
17123-8
ISO
17126
ISO
ISO
17129
17155
ISO
ISO
ISO
17166
17186
17189
ISO
17190-1
Specifications for adhesives used for finger joints in non-structural lumber products First Edition
Fine ceramics [advanced ceramics, advanced technical ceramics] - Determination of corrosion resistance of monolithic ceramics in
acid and alkaline solutions First Edition
Agricultural machinery Rotary and flail mowers Thrown-object test and acceptance criteria First Edition
Agricultural Machinery - Rotary and Flail Mowers - Test Methods and Acceptance Criteria for Protective Skirts First Edition
Health informatics ù Vocabulary for terminological systems First Edition
Health informatics Country identifier standards First Edition
Cinematography - Work Stations Used for Film and Video Production - Requirements for Visual and Audio Conditions First Edition;
Technical Corrigendum 1: 04-15-2001
Optics and Optical Instruments - Field Procedures for Testing Geodetic and Surveying Instruments - Part 1: Theory First Edition
Optics and Optical Instruments - Field Procedures for Testing Geodetic and Surveying Instruments - Part 2: Levels First Edition;
Replaces ISO 8322-3 and ISO 12857-1
Optics and Optical Instruments - Field Procedures for Testing Geodetic and Surveying Instruments - Part 3: Theodolites First Edition;
Replaces ISO 8322-4:1991 and 12857-2:1997
Optics and Optical Instruments - Field Procedures for Testing Geodetic and Surveying Instruments - Part 4: Electro-Optical Distance
Meters (EDM Instruments) First Edition; Replaces ISO 8322-8:1992 and 12857-3:1997
Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 5: Electronic tacheometers First
Edition
Optics and Optical Instruments - Field Procedures for Testing Geodetic and Surveying Instruments - Part 6: Rotating Lasers First
Edition
Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 7: Optical plumbing instruments
First Edition; Cancels and Replaces ISO 8322-5:1991
Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 8: GNSS field measurement
systems in real-time kinematic (RTK) First Edition
Soil quality Determination of the effects of pollutants on soil flora Screening test for emergence of lettuce seedlings (Lactuca sativa
L.) First Edition
Milk powder Determination of soy and pea proteins using capillary electrophoresis in the presence of sodium dodecyl sulfate (SDSCE) Screening method First Edition; Same as IDF 206
Soil quality Determination of abundance and activity of soil microflora using respiration curves First edition
Erythema Reference Action Spectrum and Standard Erythema Dose First Edition; CIE S 007/E; Corrected and Reprinted: 11-15-2000
Leather Physical and mechanical tests Determination of surface coating thickness First Edition; IULTCS/IUP 41
Butter, edible oil emulsions and spreadable fats Determination of fat content (Reference method) First Edition
Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 1: Determination
of pH First Edition
ISO
17190-2
ISO
17190-3
ISO
17190-4
ISO
17190-5
ISO
17190-6
ISO
17190-7
ISO
17190-8
ISO
17190-9
ISO
17190-10
ISO
17190-11
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
17191
17201-1
17201-2
17201-4
17202
17212
17227
17228
17229
17230
17231
17232
ISO
ISO
17233
17235
Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 2: Determination
of Amount of Residual Monomers First Edition
Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 3: Determination
of Particle Size Distribution by Sieve Fractionation First Edition
Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 4: Determination
of Moisture Content by Mass Loss Upon Heating First Edition
Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 5: Gravimetric
Determination of Free Swell Capacity in Saline Solution First Edition
Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 6: Gravimetric
Determination of Fluid Retention Capacity in Saline Soultion After Centrifugation First Edition
Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 7: Gravimetric
Determination of Absorption under Pressure First Edition
Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 8: Gravimetric
Determination of Flowrate First Edition
Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 9: Gravimetric
Determination of Density First Edition; Technical Corrigendum 1: 10/15/2002
Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 10: Gravimetric
Determination of Extractable Polymer Content by Potentiometric Titration First Edition
Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 11:
Determination of EContent of Respirable Particles First Edition
Urine-absorbing aids for incontinence Measurement of airborne respirable polyacrylate superabsorbent materials Determination of
dust in collection cassettes by sodium atomic absorption spectrometry First Edition
Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement First Edition
Acoustics Noise from shooting ranges Part 2: Estimation of muzzle blast and projectile sound by calculation First Edition
Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound First Edition
Textiles Determination of twist in single spun yarns Untwist/retwist method First edition
Structural adhesives Guidelines for the surface preparation of metals and plastics prior to adhesive bonding First Edition
Leather Physical and mechanical tests Determination of dry heat resistance of leather First Edition; IULTCS/IUP 35
Leather Tests for colour fastness Change in colour with accelerated ageing First Edition
Leather Physical and mechanical tests Determination of water vapour absorption First Edition; IULTCS/IUP 42
Leather Physical and mechanical tests Determination of water penetration pressure First Edition; IULTCS/IUP 45
Leather Physical and mechanical tests Determination of water repellency of garment leather First Edition; IULTCS/IUP 37
Leather Physical and mechanical tests Determination of heat resistance of patent leather First Edition; IULTCS/IUP 38
Leather Physical and mechanical tests Determination of cold crack temperature of surface coatings First Edition; IULTCS/IUP 29
Leather Physical and mechanical tests Determination of softness First Edition; IULTCS/IUP 36
ISO
17236
Leather Physical and mechanical tests Determination of extension set First Edition; IULTCS/IUP 43
Fruits, vegetables and derived products Determination of arsenic content Method using hydride generation atomic absorption
spectrometry First Edition
Fruit and vegetable products Determination of tin content Method using flame atomic absorption spectrometry First Edition
Coal ù Proximate analysis TECHNICAL CORRIGENDUM 1 First Edition
Coal ù Proximate analysis First edition
Coal ù Ultimate analysis TECHNICAL CORRIGENDUM 1 First Edition
Coal ù Ultimate analysis First edition
Safety footwear with resistance to chain saw cutting AMENDMENT 1 First Edition
Safety footwear with resistance to chain saw cutting First Edition
Cinematography Multichannel Analogue and Digital Photographic Sound and Control Records on 35 mm Motion-Picture Prints and
Negatives, and Digital Sound-Control Records on 70 mm Motion-Picture Prints and Negatives Position and Width Dimensions First
Edition
Compressed hydrogen surface vehicle refuelling connection devices First Edition
Passenger Car Tyres - Methods for Measuring Rolling Circumference - Loaded New Tyres First Edition
Plastics Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s) First Edition
Plastics Guide to the acquisition and presentation of design data First Edition
Road Vehicles - Ergonomic Aspects of Transport Information and Control Systems - Procedure for Assessing Suitability for Use
While Driving First Edition
Passenger Cars - Free-Steer Behaviour - Part 1: Steering-Release Open-Loop Test Method First Edition
Passenger cars Free-steer behaviour Part 2: Steering-pulse open-loop test method First Edition
Metal ball valves for petroleum, petrochemical and allied industries First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
17239
17240
17246 CORR 1
17246
17247 CORR 1
17247
17249 AMD 1
17249
ISO
ISO
ISO
ISO
ISO
17266
17268
17269
17281
17282
ISO
ISO
ISO
ISO
17287
17288-1
17288-2
17292
ISO
17294-1
ISO
17294-2
ISO
17309
Water quality Application of inductively coupled plasma mass spectrometry (ICP-MS) Part 1: General guidelines First Edition
Water quality Application of inductively coupled plasma mass spectrometry (ICP-MS) Part 2: Determination of 62 elements First
Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Mapping Functions for the Employment of a Circuit Mode Basic Service and the Supplementary Service User-to-User Signalling as a
Pair of On-Demand Inter-PINX Connections First Edition
ISO
17310
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Mapping Functions for the Employment of 64 kbit/s Circuit Mode Connections with 16 kbit/s Sub-Multiplexing First Edition
ISO
17311
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Mapping Functions for the Employment of 64 kbit/s Circuit Mode Connections with 8 kbit/s Sub-Multiplexing First Edition
ISO
17312
Soil quality Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter First Edition
ISO
17313
ISO
17321-1
ISO
17331
ISO
ISO
17332
17339
ISO
17341
ISO
17342
ISO
17344
ISO
ISO
ISO
ISO
17345
17346
17353
17355
ISO
17356-1
ISO
17356-2
Soil quality Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter First Edition
Graphic technology and photography Colour characterisation of digital still cameras (DSCs) Part 1: Stimuli, metrology and test
procedures
Surface chemical analysis Chemical methods for the collection of elements from the surface of silicon-wafer working reference
materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy First Edition
Cinematography - Manufacturer-Printed Latent Image Identification Information for 35 mm Motion-Picture Colour-Print Film Specifications First Edition
Ships and Marine Technology - Sea Anchors for Survival Craft and Rescue Boats First Edition
Information technology Data Interchange on 120 mm and 80 mm Optical Disk using +RW Format Capacity: 4,7 Gbytes and 1,46
Gbytes per Side (Recording speed up to 4X) Third Edition
Information technology 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD re-recordable disk (DVD-RW) First
Edition
Information technology Data Interchange on 120 mm and 80 mm Optical Disk using +R Format Capacity: 4,7 and 1,46 Gbytes per
Side (Recording speed up to 16X) Third Edition
Information technology Data Interchange on 130 mm Rewritable and Write Once Read Many Ultra Density Optical (UDO) Disk
Cartridges Capacity: 30 Gbytes per Cartridge First Generation Second Edition
Information technology Data interchange on 90 mm optical disk cartridges Capacity: 1,3 Gbytes per cartridge First Edition
Water quality Determination of selected organotin compounds Gas chromatographic method First Edition
Space data and information transfer systems ù CCSDS file delivery protocol Third edition
Road vehicles Open interface for embedded automotive applications Part 1: General structure and terms, definitions and
abbreviated terms First Edition
Road vehicles Open interface for embedded automotive applications Part 2: OSEK/VDX specifications for binding OS, COM and
NM First Edition
ISO
17356-3
Road vehicles Open interface for embedded automotive applications Part 3: OSEK/VDX Operating System (OS) First Edition
ISO
17356-4
Road vehicles Open interface for embedded automotive applications Part 4: OSEK/VDX Communication (COM) First Edition
ISO
17356-5
ISO
ISO
ISO
17356-6
17357
17359
Road vehicles Open interface for embedded automotive applications Part 5: OSEK/VDX Network Management (NM) First Edition
Road vehicles Open interface for embedded automotive applications Part 6: OSEK/VDX Implementation Language (OIL) First
Edition
Ships and marine technology High-pressure floating pneumatic rubber fenders First Edition
Condition monitoring and diagnostics of machines General guidelines First Edition
ISO
ISO
17361
17363
ISO
ISO
ISO
ISO
ISO
17373
17375
17380
17381
17382
ISO
ISO
ISO
ISO
17386
17398
17399
17401
ISO
ISO
ISO
ISO
17410
17422
17432
17433
ISO
17454
ISO
ISO
ISO
17455 CORR 1
17455
17456
ISO
17462
ISO
17470
ISO
17475 CORR 1
ISO
17475
ISO
ISO
17484-1
17485
Intelligent transport systems ù Lane departure warning systems ù Performance requirements and test procedures First Edition
Supply chain applications of RFID ù Freight containers First edition
Road vehicles Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed
rear-end impact First Edition
Animal feeding stuffs Determination of aflatoxin B1 First Edition
Soil quality Determination of total cyanide and easily released cyanide Continuous-flow analysis method First Edition
Water quality Selection and application of ready-to-use test kit methods in water analysis First Edition
Oil of magnolia flower, China type (Michelia Î alba DC) First Edition
Transport information and control systems Manoeuvring Aids for Low Speed Operation (MALSO) Performance requirements and
test procedures First Edition
Safety colours and safety signs Classification, performance and durability of safety signs First Edition
Space systems Man-systems integration First Edition
Space systems Spacecraft interface requirements document for launch vehicle services First Edition
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Psychrotrophic Microorganisms First
Edition
Plastics - Environmental Aspects - General Guidelines for Their Inclusion in Standards First Edition
Health informatics Messages and communication Web access to DICOM persistent objects First Edition
Space data and information transfer systems - Packet telemetry services Second Edition
Plastics Piping Systems Multilayer Pipes Test Method for the Adhesion of the Different Layers Using a Pulling Rig First Edition
Plastics piping systems ù Multilayer pipes ù Determination of the oxygen permeability of the barrier pipe TECHNICAL
CORRIGENDUM 1 First Edition
Plastics piping systems Multilayer pipes Determination of the oxygen permeability of the barrier pipe First Edition
Plastics piping systems Multilayer pipes Determination of long-term strength First Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DDS-4
Format First Edition
Microbeam analysis Electron probe microanalysis Guidelines for qualitative point analysis by wavelength dispersive X-ray
spectrometry First Edition
Corrosion of metals and alloys ù Electrochemical test methods ù Guidelines for conducting potentiostatic and potentiodynamic
polarization measurements TECHNICAL CORRIGENDUM 1 First Edition
Corrosion of metals and alloys ù Electrochemical test methods ù Guidelines for conducting potentiostatic and potentiodynamic
polarization measurements First Edition
Plastics piping systems Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5
bar (500 kPa) Part 1: Specifications for systems First Edition
Bevel gears ISO system of accuracy First Edition
ISO
17491
ISO
17492 CORR 1
ISO
17492
ISO
17493
ISO
17494
ISO
17495
ISO
17497-1
ISO
ISO
ISO
ISO
ISO
17499
17500
17504
17510-1
17510-2
ISO
ISO
ISO
17511
17514
17526
ISO
ISO
17531
17532
ISO
ISO
ISO
17544
17554
17555
ISO
ISO
17556
17557
ISO
17558
Protective Clothing - Protection Against Gaseous and Liquid Chemicals - Determination of Resistance of Protective Clothing to
Penetration by Liquids and Gases First Edition
Clothing for protection against heat and flame ù Determination of heat transmission on exposure to both flame and radiant heat
TECHNICAL CORRIGENDUM 1 First Edition
Clothing for protection against heat and flame ù Determination of heat transmission on exposure to both flame and radiant heat First
Edition
Clothing and Equipment for Protection Against Heat - Test Method for Convective Heat Resistance Using a Hot Air Circulating Oven
First Edition
Aromatic Extracts, Flavouring and Perfuming Compounds - Determination of Ethanol Content - Gas Chromatographic Method on
Packed and Capillary Columns First Edition
Water quality Determination of selected nitrophenols Method by solid-phase extraction and gas chromatography with mass
spectrometric detection First Edition
Acoustics Sound-scattering properties of surfaces Part 1: Measurement of the random-incidence scattering coefficient in a
reverberation room First Edition
Carbonaceous materials used in the production of aluminium Determination of baking level expressed by equivalent temperature
First Edition
Aluminium oxide used for the production of primary aluminium Determination of attrition index First Edition
Textile Floor Coverings - Determination of Wool Fibre Integrity Using an Abrasion Machine First Edition
Sleep apnoea breathing therapy ù Part 1: Sleep apnoea breathing therapy equipment Second Edition
Sleep apnoea breathing therapy ù Part 2: Masks and application accessories Second Edition
In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to
calibrators and control materials First edition
Time-measuring instruments Photoluminescent deposits Test methods and requirements First Edition
Optics and optical instruments Lasers and laser-related equipment Lifetime of lasers First Edition
Photography - Processing Chemicals - Specification for 4-(N-ethyl-N-2-Methanesulfonylaminoethyl)-2-Methylphenylenediamine
Sesquisulfate Monohydrate First Edition; Corrected Version 6/15/2003
Stationary equipment for agriculture ù Data communications network for livestock farming First Edition
Carbonaceous materials used in the production of aluminium Cold and tepid ramming pastes Determination of rammability of
unbaked pastes First Edition
Reaction to fire tests - Mass loss measurement First Edition
Plastics Film and sheeting Biaxially oriented polypropylene (PP) films First Edition
Plastics Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the
amount of carbon dioxide evolved First Edition
Plastics Film and sheeting Cast polypropylene (PP) films First Edition
Steel wire ropes Socketing procedures Molten metal and resin socketing First Edition; Supersedes ISO 7595: 1984 and ISO/TR
7596: 1982
ISO
ISO
17559
17560
ISO
17561
ISO
ISO
17562
17564
ISO
ISO
ISO
ISO
17565
17567
17577
17584
ISO
17591
ISO
17592
ISO
ISO
ISO
17593
17594
17604
ISO
ISO
ISO
ISO
ISO
ISO
17612
17613-1
17615
17624
17631 CORR 1
17631
ISO
17632
ISO
17633
ISO
ISO
ISO
17634
17635
17636
Hydraulic fluid power Electrically controlled hydraulic pumps Test methods to determine performance characteristics First Edition
Surface Chemical Analysis - Secondary-ion Mass Spectrometry - Method for Depth Profiling of Boron in Silicon First Edition
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Elastic Moduli of Monolithic Ceramics at
Room Temperature by Sonic Resonance First Edition
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Linear Thermal Expansion of Monolithic
Ceramics by Push-Rod Technique First Edition
Nitrile Rubber - Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for flexural strength of monolithic ceramics at
elevated temperature First Edition
Agricultural and forestry tractors and implements Hydraulic power beyond First edition
Steel Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm First Edition
Refrigerant properties First Edition
Machinery for forestry Knuckleboom log loaders Identification terminology, classification and component nomenclature First edition;
Supercedes J2055
Information technology 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD rewritable disk (DVD-RAM) First
Edition
Clinical laboratory testing and in vitro medical devices ù Requirements for in vitro monitoring systems for self-testing of oral
anticoagulant therapy First edition
Information technology Cases for 120 mm and 80 mm DVD-RAM disks First Edition
Microbiology of Food and Animal Feeding Stuffs - Carcass Sampling for Microbiological Analysis First Edition
Tractors and machinery for agriculture and forestry Auxiliary-power transmission connector for the operator station First Edition
Manually operated pumps for drinking water Selection and acceptance Part 1: Southeast Asia First Edition
Aluminium and aluminium alloys ù Alloyed ingots for remelting ù Specifications First Edition
Acoustics Guidelines for noise control in offices and workrooms by means of acoustical screens First Edition
Ships and marine technology ù Shipboard plans for fire protection, life-saving appliances and means of escape First Edition
Ships and marine technology ù Shipboard plans for fire protection, life-saving appliances and means of escape First Edition
Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain
steels Classification First edition
Welding consumables Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and
heat-resisting steels Classification First Edition
Welding consumables Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels Classification First
Edition
Non-destructive testing of welds General rules for fusion welds in metallic materials First edition
Non-destructive testing of welds Radiographic testing of fusionwelded joints First Edition
ISO
ISO
ISO
ISO
17637
17638
17639
17640
ISO
17641-1
ISO
17641-2
ISO
17642-1
ISO
17642-2
ISO
ISO
ISO
17642-3
17643
17652-1
ISO
ISO
17652-2
17652-3
Non-destructive testing of welds Visual testing of fusion-welded joints First Edition
Non-destructive testing of welds Magnetic particle testing First Edition
Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds First edition
Non-destructive testing of welds Ultrasonic testing of welded joints First Edition
Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 1: General First
Edition
Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 2: Self-restraint tests
First Edition
Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 1: General First
Edition
Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 2: Self-restraint tests
First Edition
Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 3: Externally loaded
tests First Edition
Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis First Edition
Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 1: General Requirements First Edition
Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 2: Welding Properties of Shop Primers First
Edition
Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 3: Thermal Cutting First Edition
ISO
ISO
17652-4
17653
Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 4: Emission of Fumes and Gases First Edition
Destructive Test on Welds in Metallic Materials - Torsion Test of Resistance Spot Welds First Edition
ISO
ISO
ISO
17654
17655
17657-1
ISO
ISO
ISO
17657-2
17657-3
17657-4
ISO
17657-5
ISO
17658
ISO
17659
Destructive Tests on Welds in Metallic Materials - Resistance Welding - Pressure Test on Resistance Seam Welds First Edition
Destructive Tests on Welds in Metallic Materials - Method for Taking Samples for Delta Ferrite Measurement First Edition
Resistance welding Welding current measurement for resistance welding Part 1: Guidelines for measurement First Edition
Resistance welding Welding current measurement for resistance welding Part 2: Welding current meter with current sensing coil
First Edition
Resistance welding Welding current measurement for resistance welding Part 3: Current sensing coil First Edition
Resistance welding Welding current measurement for resistance welding Part 4: Calibration system First Edition
Resistance welding Welding current measurement for resistance welding Part 5: Verification of welding current measuring system
First Edition
Welding - Imperfections in Oxyfuel Flame Cuts, Laser Beam Cuts and Plasma Cuts - Terminology Soudage - Defauts Des Coupes
Executees Par Oxycoupage, Coupage Laser Et Coupage Plasma - Terminologie First Edition
Welding - Multilingual Terms for Welded Joints with Illustrations Soudage - Liste Multilingue De Termes Relatifs Aux Assemblages Et
Aux Joints Soudes, Avec Illustrations First Edition
ISO
ISO
ISO
17660-1
17660-2
17662
ISO
17664
Welding Welding of reinforcing steel Part 1: Load-bearing welded joints First Edition
Welding Welding of reinforcing steel Part 2: Non load-bearing welded joints First Edition
Welding Calibration, verification and validation of equipment used for welding, including ancillary activities First Edition
Sterilization of medical devices Information to be provided by the manufacturer for the processing of resterilizable medical devices
First Edition
ISO
ISO
17665-1
17666
Sterilization of health care products Moist heat Part 1: Requirements for the development, validation and routine control of a
sterilization process for medical devices First Edition; Replaces ISO 11134: 1994 and ISO 13683: 1997 [Superseded: ISO 17665-1]
Space Systems - Risk Management First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
17687
17693
17694
17695
17696
17697
17698
17699
17700
17701
17702
17703
17704
17705
17706
17707
17708
17709
Transport Information and Control Systems (TICS) ù General fleet management and commercial freight operations ù Data dictionary
and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation First Edition
Footwear Test methods for uppers Resistance to damage on lasting First Edition
Footwear Test methods for uppers and lining Flex resistance First Edition
Footwear Test methods for uppers Deformability First Edition
Footwear Test methods for uppers, linings and insocks Tear strength First Edition
Footwear Test methods for uppers, lining and insocks Seam strength First Edition
Footwear Test methods for uppers Delamination resistance First Edition
Footwear Test methods for uppers and lining Water vapour permeability and absorption First Edition
Footwear Test methods for uppers, linings and insocks Colour fastness to rubbing First Edition
Footwear Test methods for uppers, lining and insocks Colour migration First Edition
Footwear Test methods for uppers Water resistance First Edition
Footwear Test methods for uppers High temperature behaviour First Edition
Footwear Test methods for uppers, linings and insocks Abrasion resistance First Edition
Footwear Test methods for uppers, lining and insocks Thermal insulation First Edition
Footwear Test methods for uppers Tensile strength and elongation First Edition
Footwear Test methods for outsoles Flex resistance First Edition
Footwear Test methods for whole shoe Upper sole adhesion First Edition
Footwear Sampling location, preparation and duration of conditioning of samples and test pieces First Edition
ISO
ISO
17710
17713-1
ISO
ISO
17714
17724
Plastics - Polyols for use in the Production of Polyurethane - Determination of Degree of Unsaturation by Microtitration First Edition
Meteorology ù Wind measurements ù Part 1: Wind tunnel test methods for rotating anemometer performance First Edition
Meteorology ù Air temperature measurements ù Test methods for comparing the performance of thermometer shields/screens and
defining important characteristics FIRST EDITION
Graphical symbols Vocabulary First edition
ISO
17733
ISO
17734-1
ISO
17734-2
ISO
ISO
ISO
17744
17771
17775
ISO
17776
ISO
17792
ISO
ISO
ISO
ISO
ISO
17799 CORR 1
17799
17804
17834
17836
ISO
ISO
17846
17852
ISO
ISO
ISO
17853 CORR 1
17853
17864
ISO
ISO
ISO
ISO
ISO
17873
17874-1
17874-2
17874-4
17874-5
ISO
17875
Workplace air Determination of mercury and inorganic mercury compounds Method by cold-vapour atomic absorption spectrometry
or atomic fluorescence spectrometry First Edition
Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Part 1: Isocyanates using
dibutylamine derivatives First Edition
Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Part 2: Amines and
aminoisocyanates using dibutylamine and ethyl chloroformate derivatives First Edition
Plastics Determination of specific volume as a function of temperature and pressure (pvT diagram) Piston apparatus method First
Edition
Plastics Thermoset moulding compounds Determination of the degree of fibre wetting in SMC First Edition
Aircraft Ground-service connections Potable water, toilet-flush water and toilet drain First Edition
Petroleum and Natural Gas Industries - Offshore Production Installations - Guidelines on Tools and Techniques for Hazard
Identification and Risk Assessment First Edition
Milk, milk products and mesophilic starter cultures Enumeration of citratefermenting lactic acid bacteria Colonycount technique at 25
C First Edition
Information technology ù Security techniques ù Code of practice for information security management Second Edition; This
Corrigendum Renumbers this Document to ISO 27002 with No New Replacement Hardcopy
Information technology Security techniques Code of practice for information security management Second Edition
Founding - Ausferritic spheroidal graphite cast irons - Classification First Edition
Thermal spraying Coatings for protection against corrosion and oxidation at elevated temperatures First Edition
Thermal spraying Determination of the deposition efficiency for thermal spraying First Edition
Welding and allied processes Health and safety Wordless precautionary labels for equipment and consumables used in arc welding
and cutting First Edition
Water quality Determination of mercury Method using atomic fluorescence spectrometry First Edition
Wear of implant materials ù Polymer and metal wear particles ù Isolation, characterization and quantification TECHNICAL
CORRIGENDUM 1 First Edition
Wear of implant materials ù Polymer and metal wear particles ù Isolation, characterization and quantification First Edition
Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control First Edition
Nuclear facilities Criteria for the design and operation of ventilation systems for nuclear installations other than nuclear reactors First
Edition
Remote-handling devices for radioactive materials Part 1: General requirements First Edition
Remote-handling devices for radioactive materials Part 2: Mechanical master-slave manipulators First Edition
Remote handling devices for radioactive materials Part 4: Power manipulators First Edition
Remote handling devices for radioactive materials ù Part 5: Remote handling tongs First Edition
Information Technology - Telecommunications and Information between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Private User Mobility (PUM) - Registration Supplementary Service First
Edition
ISO
17876
ISO
17877
ISO
ISO
ISO
17878
17884
17893
ISO
17894
ISO
ISO
17895
17899
ISO
17900
ISO
17913
ISO
ISO
ISO
17925
17932
17933
ISO
17973
ISO
17974
ISO
ISO
ISO
ISO
ISO
17993
17994
17995
17997-1
17997-2
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Private User Mobility (PUM) - Registration Supplementary Service Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Private User Mobility (PUM) - Call Handling Additional Network Features First
Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Service Network Inter-Exchange Signalling Protocol - Private User Mobility (PUM) - Call Handling Additional Network Features Second Edition
Ships and marine technology Searchlights for high-speed craft First Edition
Steel wire ropes Vocabulary, designation and classification First Edition
Ships and marine technology Computer applications General principles for the development and use of programmable electronic
systems in marine applications First edition
Paints and varnishes Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) First Edition
Ships and marine technology Marine electric window wipers First Edition
Agricultural Trailers - Balanced and Semi-Mounted Trailers - Determination of Payload, Vertical Static Load and Axle Load First
Edition
Information Technology - 12,7 mm 128-Track Magnetic Tape Cartridge for Information Interchange - Parallel Serpentine Format First
Edition
Zinc and/or aluminium based coatings on steel Determination of coating mass per unit area and chemical composition Gravimetry,
inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry First Edition
Animal and vegetable fats and oils Determination of the deterioration of bleachability index (DOBI) First Edition
GEDI - Generic Electronic Document Interchange First Edition
Surface Chemical Analysis - Medium-Resolution Auger Electron Spectrometers - Calibration of Energy Scales for Elemental Analysis
First Edition
Surface Chemical Analysis - High-Resolution Auger Electron Spectrometers - Calibration of Energy Scales for Elemental and
Chemical-State Analysis First Edition
Water Quality - Determination of 15 Polycyclic Aromatic Hydrocarbons (PAH) in Water by HPLC with Fluorescence Detection After
Liquid-Liquid Extraction First Edition
Water quality Criteria for establishing equivalence between microbiological methods First Edition
Water quality Detection and enumeration of thermotolerant Campylobacter species First Edition
Milk Determination of casein-nitrogen content Part 1: Indirect method (Reference method) First Edition; IDF 29-1
Milk Determination of casein-nitrogen content Part 2: Direct method First Edition; IDF 29-2
ISO
18000-1
ISO
18000-2
ISO
18000-3
ISO
18000-4
ISO
18000-6 AMD 1
ISO
18000-6
ISO
18000-7
ISO
ISO
ISO
ISO
ISO
18004
18009
18010 AMD 1
18010
18012-1
ISO
ISO
18013-1
18014-1
ISO
18014-2
ISO
18014-3
ISO
18017
ISO
ISO
ISO
18021
18028-1
18028-2
ISO
18028-3
Information technology Radio frequency identification for item management
parameters to be standardized First Edition
Information technology Radio frequency identification for item management
below 135 kHz First Edition
Information technology Radio frequency identification for item management
13,56 MHz First Edition
Information technology Radio frequency identification for item management
2,45 GHz First Edition
Part 1: Reference architecture and definition of
Part 2: Parameters for air interface communications
Part 3: Parameters for air interface communications at
Part 4: Parameters for air interface communications at
Information technology ù Radio frequency identification for item management ù Part 6: Parameters for air interface communications
at 860 MHz to 960 MHz AMENDMENT 1: Extension with Type C and update of Types A and B First Edition
Information technology ù Radio frequency identification for item management ù Part 6: Parameters for air interface communications
at 860 MHz to 960 MHz First Edition
Information technology Radio frequency identification for item management Part 7: Parameters for active air interface
communications at 433 MHz First Edition
Information technology Automatic identification and data capture techniques QR Code 2005 bar code symbology specification
Second Edition
Information Technology - Programming Languages - Ada: Conformity Assessment of a Language Processor First Edition
Information technology - Pathways and spaces for customer premises cabling Amendment 1 First Edition
Information technology - Pathways and spaces for customer premises cabling First Edition
Information technology Home Electronic System Guidelines for product interoperability Part 1: Introduction First Edition
Information technology - Personal identification - ISO-compliant driving licence - Part 1: Physical characteristics and basic data set
First Edition
Information Technology - Security Techniques - Time-stamping Services - Part 1: Framework First Edition
Information technology Security techniques Time-stamping services Part 2: Mechanisms producing independent tokens First
Edition
Information technology Security techniques Time-stamping services Part 3: Mechanisms producing linked tokens First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Mapping Functions for the Employment of Virtual Private Network Scenarios First Edition
Information Technology - User Interfaces for Mobile Tools for Management of Database Communications in a Client-Server Model
First Edition
Information technology Security techniques IT network security Part 1: Network security management First Edition
Information technology Security techniques » IT network security Part 2: Network security architecture First Edition
Information technology Security techniques IT network security Part 3: Securing communications between networks using security
gateways First Edition
ISO
18028-4
ISO
ISO
ISO
ISO
ISO
18028-5
18031
18032
18033-1
18033-2
ISO
18033-3 CORR 2
ISO
ISO
ISO
ISO
ISO
18033-3 CORR 1
18033-3
18033-4
18035
18036
ISO
ISO
18043
18045
ISO
18046
ISO
ISO
18046-3
18050
ISO
18051
ISO
DIS 18051
ISO
18052
ISO
18054
ISO
18055-1
ISO
18056
Information technology Security techniques IT network security Part 4: Securing remote access First edition
Information technology Security techniques IT network security Part 5: Securing communications across networks using virtual
private networks First Edition
Information technology Security techniques Random bit generation First Edition
Information technology Security techniques Prime number generation First Edition
Information technology Security techniques Encryption algorithms Part 1: General First Edition
Information technology Security techniques Encryption algorithms Part 2: Asymmetric ciphers First Edition
Information technology ù Security techniques ù Encryption algorithms ù Part 3: Block ciphers TECHNICAL CORRIGENDUM 2 First
Edition
Information technology ù Security techniques ù Encryption algorithms ù Part 3: Block ciphers TECHNICAL CORRIGENDUM 1 First
Edition
Information technology ù Security techniques ù Encryption algorithms ù Part 3: Block ciphers First Edition
Information technology - Security techniques - Encryption algorithms - Part 4: Stream ciphers First Edition
Information Technology - Icon Symbols and Functions for Controlling Multimedia Software Applications First Edition
Information technology Icon symbols and functions for World Wide Web browser toolbars First Edition
Information technology Security techniques Selection, deployment and operations of intrusion detection systems First Edition
Information technology Security techniques Methodology for IT security evaluation First Edition
Information technology Automatic identification and data capture techniques Radio frequency identification device performance test
methods First Edition;:2005
Information technology ù Radio frequency identification device performance test methods ù Part 3: Test methods for tag performance
First Edition
Information technology Office equipment Print quality attributes for machine readable Digital Postage Marks First Edition
Information technology Telecommunications and information exchange between systems Services for Computer Supported
Telecommunications Applications (CSTA) Phase III Third Edition
Information technology ù Telecommunications and information exchange between systems ù Services for Computer Supported
Telecommunications Applications (CSTA) Phase III
Information Technology - Telecommunications and Information Exchange between Systems - Protocol for Computer Supported
Telecommunications Applications (CSTA) Phase III First Edition
Oils of orris rhizome (Iris pallida Lam. or Iris germanica L.) Determination of irone content Method using gas chromatography on a
capillary column First Edition
Photography and imaging Inkjet media: Classification, nomenclature and dimensions Part 1: Photo-grade media (paper and film)
First Edition
Information technology Telecommunications and information exchange between systems XML Protocol for Computer-Supported
Telecommunications Applications (CSTA) Phase III Second Edition
ISO
ISO
DIS 18056
18064
ISO
ISO
18073
18084
ISO
18092
ISO
ISO
18093
18104
ISO
ISO
ISO
18114
18115
18116
ISO
18118
ISO
18132-1
ISO
18144
ISO
18145
ISO
18153
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
18164
18172-1
18172-2
18185-1
18185-2
18185-3
18185-4
18185-5
18207
18232
Information technology ù Telecommunications and information exchange between systems ù XML protocol for Computer Supported
Telecommunications Applications (CSTA) Phase III
Thermoplastic elastomers Nomenclature and abbreviated terms First Edition
Water quality Determination of tetra- to octa-chlorinated dioxins and furans Method using isotope dilution HRGC/HRMS First Edition
Press tools for tablets Punches and dies First edition
Information technology Telecommunications and information exchange between systems Near Field Communication Interface and
Protocol (NFCIP-1) First Edition
Informational Technology - Data Interchange on 130 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using
Irreversible Effects - Capacity: 5,2 Gbytes per Cartridge First Edition
Health informatics Integration of a reference terminology model for nursing First Edition
Surface Chemical Analysis - Secondary-Ion Mass Spectrometry - Determination of Relative Sensitivity Factors from Ion-Implanted
Reference Materials First Edition
Surface Chemical Analysis - Vocabulary First Edition; Amendment 1: 01/15/2006
Surface chemical analysis Guidelines for preparation and mounting of specimens for analysis First Edition
Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Guide to the use of experimentally
determined relative sensitivity factors for the quantitative analysis of homogeneous materials First Edition
Refrigerated light hydrocarbon fluids General requirements for automatic level gauges Part 1: Gauges onboard ships carrying
liquefied gases First Edition
Environmental tobacco smoke Estimation of its contribution to respirable suspended particles Method based on solanesol First
Edition
Environmental tobacco smoke Determination of vapour phase nicotine and 3-ethenylpyridine in air Gas-chromatographic method
First Edition
In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological aceability of values for catalytic
concentration of enzymes assigned to calibrators and control materials First Edition
Passenger car, truck, bus and motorcycle tyres Methods of measuring rolling resistance First Edition; Replaces ISO 8767, ISO 9948
and ISO 13327
Gas cylinders ù Refillable welded stainless steel cylinders ù Part 1: Test pressure 6 MPa and below First Edition
Gas cylinders ù Refillable welded stainless steel cylinders ù Part 2: Test pressure greater than 6 MPa
Freight containers ù Electronic seals ù Part 1: Communication protocol First Edition
Freight containers ù Electronic seals ù Part 2: Application requirements First edition
Freight containers Electronic seals Part 3: Environmental characteristics First Edition
Freight containers ù Electronic seals ù Part 4: Data protection First Edition
Freight containers ù Electronic seals ù Part 5: Physical layer First Edition
Road vehicles Trailers up to 3,5 t Control of welded towing brackets for coupling ball after fatigue testing First Edition
Health Informatics Messages and communication Format of length limited globally unique string identifiers First Edition
ISO
ISO
18233
18245
Acoustics Application of new measurement methods in building and room acoustics First Edition
Retail Financial Services - Merchant Category Codes First Edition
ISO
ISO
18252
18265
Anhydrous milk fat Determination of sterol composition by gas liquid chromatography (Routine method) First Edition; IDF 200
Metallic materials Conversion of hardness values First Edition
ISO
18273
ISO
18274 CORR 2
ISO
18274 CORR 1
ISO
18274
ISO
ISO
18275 CORR 1
18275
ISO
18276
ISO
18278-1
Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification First edition
Welding consumables ù Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys ù Classification
TECHNICAL CORRIGENDUM 2 First Edition
Welding consumables ù Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys ù Classification ù
TECHNICAL CORRIGENDUM 1 First Edition
Welding consumables ù Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys ù Classification First
Edition
Welding consumables ù Covered electrodes for manual metal arc welding of high-strength steels ù Classification TECHNICAL
CORRIGENDUM 1 First Edition
Welding consumables Covered electrodes for manual metal arc welding of high-strength steels Classification First Edition
Welding consumables Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels
Classification First Edition
Resistance welding Weldability Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic
materials First Edition
ISO
ISO
ISO
ISO
ISO
18278-2
18279
18280
18283
18286
ISO
18287
ISO
18329
ISO
ISO
ISO
18330
18333
18334
Resistance welding Weldability Part 2: Alternative procedures for the assessment of sheet steels for spot welding First Edition
Brazing Imperfections in brazed joints First Edition
Plastics Epoxy resins Test methods First Edition
Hard coal and coke Manual sampling First Edition
Hot-rolled stainless steel plates Tolerances on dimensions and shape First Edition
Soil quality Determination of polycyclic aromatic hydrocarbons (PAH) Gas chromatographic method with mass spectrometric
detection (GC-MS) First Edition
Milk and milk products Determination of furosine content Ion-pair reversephase high-performance liquid chromatography method
First Edition
Milk and milk products Guidelines for the standardized description of immunoassays or receptor assays for the detection of
antimicrobial residues First Edition; IDF 188
Pallets for materials handling Quality of new wooden components for flat pallets First Edition
Pallets for Materials Handling - Quality of Assembly of New, Wooden, Flat Pallets First Edition
ISO
18369-1
ISO
18369-2
ISO
18369-3
ISO
ISO
18369-4
18372
ISO
18373-1
ISO
ISO
18395
18412
ISO
18413
ISO
ISO
ISO
ISO
18414
18415
18416
18431-1
ISO
ISO
18431-2
18431-4
ISO
18436-1 CORR 1
ISO
18436-1
ISO
18436-2
ISO
18437-2
ISO
18437-3
Ophthalmic optics Contact lenses Part 1: Vocabulary, classification system and recommendations for labelling specifications First
Edition; Replaces ISO 8320-1:2003, ISO 8320-2:2001, and ISO 11539:1999; Together with ISO 18369-2 replaces ISO ISO 83211:2002 and ISO 8321-2:2000
Ophthalmic optics Contact lenses Part 2: Tolerances First Edition; Together with ISO 18369-1:2006 replaces ISO ISO 8321-1:2002
and ISO 8321-2:2000
Ophthalmic optics Contact lenses Part 3: Measurement methods First Edition; Replaces ISO 8599:1994, ISO 9337-1:1999, ISO 93372:2004, ISO 9338:1996, ISO 9339-1:1996, ISO 9339-2:1998, ISO 9341:1996, ISO 10338:1996 and ISO 10344:1996
Ophthalmic optics Contact lenses Part 4: Physicochemical properties of contact lens materials First Edition; Replaces ISO 99131:1996, ISO 9913-2:2000, ISO 9914:1995, ISO 10339:1997, ISO 10340:1995 and ISO 11984:1999
Information technology RapidIO interconnect specification First Edition
Rigid PVC pipes ù Differential scanning calorimetry (DSC) method ù Part 1: Measurement of the processing temperature First Edition
Animal and vegetable fats and oils Determination of monoacylglycerols, diacylglycerols, triacylglycerols and glycerol by highperformance sizeexclusion chromatography (HPSEC) First Edition
Water quality Determination of chromium(VI) Photometric method for weakly contaminated water First edition
Hydraulic Fluid Power - Cleanliness of Parts and Components - Inspection Document and Principles Related to Contaminant
Collection, Analysis and Data Reporting First Edition
Acceptance sampling procedures by attributes Accept-zero sampling system based on credit principle for controlling outgoing quality
First Edition
Cosmetics ù Microbiology ù Detection of specified and non-specified microorganisms First Edition
Cosmetics ù Microbiology ù Detection of Candida albicans First Edition
Mechanical vibration and shock - Signal processing Part 1: General introduction First Edition
Mechanical vibration and shock Signal processing Part 2: Time domain windows for Fourier Transform analysis First Edition
Mechanical vibration and shock ù Signal processing ù Part 4: Shock-response spectrum analysis First Edition
Condition monitoring and diagnostics of machines ù Requirements for training and certification of personnel ù Part 1: Requirements
for certifying bodies and the certification process TECHNICAL CORRIGENDUM 1 First Edition
Condition monitoring and diagnostics of machines ù Requirements for training and certification of personnel ù Part 1: Requirements
for certifying bodies and the certification process First Edition
Condition monitoring and diagnostics of machines - Requirements for Training and Certification of Personnel - Part 2: Vibration
Condition Monitoring and Diagnostics First Edition
Mechanical vibration and shock Characterization of the dynamic mechanical properties of visco-elastic materials Part 2: Resonance
method First Edition
Mechanical vibration and shock Characterization of the dynamic mechanical properties of visco-elastic materials Part 3: Cantilever
shear beam method First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe
profilometer First Edition
Natural gas Correlation between water content and water dew point First Edition
Footwear - Standard Atmospheres for Conditioning and Testing of Footwear and Components for Footwear First Edition
Sterilization of health care products Biological and chemical indicators Test equipment First Edition
Soil quality ù Guidance on long and short term storage of soil samples First Edition
Tourism services Hotels and other types of tourism accommodation Terminology Services touristiques H¶tels et autres types
dÆhÚbergements touristiques Terminologie First Edition
Carbonaceous materials for the production of aluminium ù Cathode blocks and baked anodes ù Determination of compressive
strength First Edition
Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Determination of lateral resolution
First Edition
Rubber, vulcanized or thermoplastic Hardness testing Introduction and guide First Edition
Method for the Assessment of the Degree of Pigment or Carbon Black Dispersion in Polyolefin Pipes, Fittings and Compounds First
Edition; Replaces ISO 11420 and ISO 13949
Conveyor belts Test atmospheres and conditioning periods First Edition
Measurement of radioactivity in the environment Soil Part 1: General guidelines and definitions First edition
Microbiology of food and animal feeding stuffs Horizontal methods for sampling techniques from surfaces using contact plates and
swabs First Edition
Resistance spot-, projection- and seamwelding ù Method for determining the transition resistance on aluminium and steel material
First Edition
Resistance Welding - Spot Welding Of Aluminium And Aluminium Alloys - Weldability, Welding And Testing First Edition
Repair of flat wooden pallets First Edition
ISO
ISO
ISO
ISO
ISO
18452
18453
18454
18472
18512
ISO
18513
ISO
18515
ISO
ISO
18516
18517
ISO
ISO
ISO
18553
18573
18589-1
ISO
18593
ISO
ISO
ISO
18594
18595
18613
ISO
ISO
ISO
18629-1
18629-11
18629-12
Industrial automation systems and integration Process specification language Part 1: Overview and basic principles First Edition
Industrial automation systems and integration - Process specification language - Part 11: PSL core First Edition
Industrial automation systems and integration - Process specification language - Part 12: Outer core First Edition
ISO
ISO
18629-13
18629-14
ISO
18629-41
ISO
18629-42
ISO
18629-43
Industrial automation systems and integration
Industrial automation systems and integration
Industrial automation systems and integration
First Edition
Industrial automation systems and integration
extensions First Edition
Industrial automation systems and integration
duration extensions First Edition
Process specification language Part 13: Duration and ordering theories First Edition
Process specification language Part 14: Resource theories First Edition
Process specification language Part 41: Definitional extension: Activity extensions
Process specification language Part 42: Definitional extension: Temporal and state
Process specification language Part 43: Definitional extension: Activity ordering and
ISO
ISO
18629-44
18649
Industrial automation systems and integration Process specification language Part 44: Definitional extension: Resource extensions
First Edition
Mechanical vibration Evaluation of measurement results from dynamic tests and investigations on bridges First Edition
ISO
18650-1
Building construction machinery and equipment Concrete mixers Part 1: Vocabulary and general specifications First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
18650-2
18652
18653
18669-1
18669-2
18692
18696
18738
18749
ISO
18752
ISO
18753
Building construction machinery and equipment Concrete mixers Part 2: Procedure for examination of mixing efficiency First Edition
Building construction machinery and equipment External vibrators for concrete First Edition
Gears Evaluation of instruments for the measurement of individual gears First Edition
Internal combustion engines Piston pins Part 1: General specifications First Edition
Internal combustion engines Piston pins Part 2: Inspection measuring principles First Edition
Fibre ropes for offshore stationkeeping ù Polyester First Edition
Textiles Determination of resistance to water absorption Tumble-jar absorption test First Edition
Lifts (elevators) Measurement of lift ride quality First Edition
Water quality Adsorption of substances on activated sludge Batch test using specific analytical methods First Edition
Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification First
Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of absolute density of ceramic powders by
pyknometer First Edition
ISO
18754
ISO
18755
ISO
18756
ISO
ISO
ISO
ISO
ISO
18757
18770
18777
18778
18779
ISO
18809
ISO
ISO
18810
18812
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of density and apparent porosity First edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of thermal diffusivity of monolithic ceramics by
laser flash method First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of fracture toughness of monolithic ceramics at
room temperature by the surface crack in flexure (SCF) method First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of specific surface area of ceramic powders by gas
adsorption using the BET method First Edition
Ships and marine technology Machinery-space flammable oil systems Prevention of leakage of flammable oil First Edition
Transportable liquid oxygen systems for medical use Particular requirements First Edition
Respiratory equipment Infant monitors Particular requirements First Edition
Medical devices for conserving oxygen and oxygen mixtures Particular requirements First Edition
Information Technology - 8mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording AIT-1 with MIC
Format First Edition
Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording AIT-2 with Mic
Format First Edition
Health Informatics - Clinical Analyser Interfaces to Laboratory Information Systems - Use Profiles First Edition
ISO
18813
ISO
18836
ISO
ISO
18852
18856
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
18857-1
18872
18878
18893
18894
18895
18896
18898
18899
18901
ISO
ISO
ISO
ISO
ISO
ISO
ISO
18902
18903
18904
18905
18906
18907
18908
ISO
ISO
ISO
ISO
ISO
ISO
18909 CORR 1
18909
18910
18911
18912
18913
ISO
18914
ISO
18915
Ships and marine technology Survival equipment for survival craft and rescue boats First Edition
Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - Mammoth
Tape-2 Format First Edition
Rubber compounding ingredients Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area
(STSA) First edition
Water quality Determination of selected phthalates using gas chromatography/mass spectrometry First Edition
Water quality Determination of selected alkylphenols Part 1: Method for non-filtered samples using liquid-liquid extraction and gas
chromatography with mass selective detection First Edition
Plastics ù Determination of tensile properties at high strain rates First Edition
Mobile elevating work platforms Operator (driver) training First Edition
Mobile elevating work platforms Safety principles, inspection, maintenance and operation First Edition
Coke Determination of coke reactivity index (CRI) and coke strength after reaction (CSR) First Edition
Footwear Test methods for shanks Fatigue resistance First Edition
Footwear Test methods for shanks Longitudinal stiffness First Edition
Rubber Calibration and verification of hardness testers First Edition
Rubber Guide to the calibration of test equipment First Edition
Imaging Materials - Processed Silver-Gelatin Type Black-and-White Films - Specifications for Stability First Edition
Imaging Materials - Processed Photographic Films, Plates and Paper - Filing Enclosures and Storage Containers First Edition
Imaging Materials Films and Paper Determination of Dimensional Change First Edition; Replaces ISO 6221
Imaging Materials - Processed Films - Method for Determining Lubrication First Edition
Imaging Materials - Ammonia-Processed Diazo Photographic Film - Specifications for Stability First Edition
Imaging Materials - Photographic Films - Specificzations for Safety Film First Edition; Supersedes ISO 543:1990
Imaging Materials - Photographic Films and Papers - Wedge Test for Brittleness First Edition
Imaging Materials - Photographic Film - Determination of Folding Endurance First Edition
Photography ù Processed photographic colour films and paper prints ù Methods for measuring image stability TECHNICAL
CORRIGENDUM 1 First Edition
Photography ù Processed photographic colour films and paper prints ù Methods for measuring image stability First Edition
Imaging Materials - Photographic Film and Paper - Determination of Curl First Edition
Imaging Materials - Processed Safety Photographic Films - Storage Practices First Edition
Imaging Materials - Processed Vesicular Photographic Film - Specifications for Stability First Edition
Imaging materials Permanence Vocabulary First Edition
Imaging Materials - Photographic Film and Papers - Method for Determining the Resistance of Photographic Emulsions to Wet
Abrasion First Edition
Imaging Materials - Methods for the Evaluation of the Effectiveness of Chemical Conversion of Silver Images Against Oxidation First
Edition; Replaces ISO 18915
ISO
18916
Imaging materials ù Processed imaging materials ù Photographic activity test for enclosure materials First Edition
Photography - Determination of Residual Thiosulfate and Other Related Chemicals in Processed Photographic Materials - Methods
Using Iodine-Amylose, Methylene Blue and Silver Sulfide First Edition; Cancels and Replaces ISO 417: 1993
Imaging Materials - Processed Photographic Plates - Storage Practices First Edition
Imaging Materials - Thermally Processed Silver Microfilm - Specifications for Stability First Edition
ISO
ISO
ISO
18917
18918
18919
ISO
18920
ISO
ISO
ISO
ISO
ISO
18921
18922
18923
18924
18925
ISO
18926
ISO
18927
ISO
18928
ISO
ISO
ISO
ISO
18929
18932
18933
18934
ISO
18935
ISO
ISO
ISO
19001
19003
19004
ISO
19005-1 CORR 1
Document management ù Electronic document file format for long-term preservation ù Part 1: Use of PDF 1.4 (PDF/A-1) First Edition
ISO
19005-1
ISO
19011
Document management - Electronic document file format for long-term preservation - Part 1: Use of PDF 1.4 (PDF/A-1) First Edition
Guidelines for Quality and/or Environmental Management Systems Auditing First Edition; Replaces ISO 10011-1:1990, ISO 100112:1991, ISO 10011-3:1991, ISO 14010:1996, ISO 14011:1996, and ISO 14012:1996
Imaging Materials - Processed Photographic Reflection Prints - Storage Practices First Edition ; Replaces Fourth Edition of ISO 6051
Imaging Materials Compact Discs (CD-ROM) Method for Estimating the Life Expectancy Based on the Effects of Perature and
Relative Humidity First Edition
Imaging Materials - Processed Photographic Films - Methods for Determining Scratch Resistance First Edition
Imaging Materials - Polyester - Base Magnetic Tape - Storage Practices First Edition
Imaging Materials - Test Method for Arrhenius-Type Predictions First Edition
Imaging Materials - Optical Disc Media - Storage Practices First Edition
Imaging materials Information stored on magneto-optical (MO) discs Method for estimating the life expectancy based on the effects
of temperature and relative humidity First Edition
Imaging Materials - Recordable Compact Disc Systems - Method for Estimating the Life Expectanc Based on the Effects of
Temperature and Relative Humidity First Edition
Imaging Materials - Unprocessed Photographic Films and Papers - Storage Practices Second Edition; Cancels and Replaces 10331:
1991
Imaging materials Wet-processed silver-gelatin type black-and-white photographic reflection prints Specifications for dark storage
First Edition
Imaging materials Adhesive mounting systems Specifications First Edition
Imaging materials Magnetic tape Care and handling practices for extended usage First Edition
Imaging materials Multiple media archives Storage environment First Edition
Imaging materials Colour images on paper prints Determination of indoor water resistance of printed colour images First Edition
In Vitro Diagnostic Medical Devices - Information Supplied by the Manufacturer with in Vitro Diagnostic Reagents for Staining in
Biology First Edition
Rubber and rubber products Guidance on the application of statistics to physical testing First Edition
Rubber and rubber products Determination of the sensitivity of test methods First Edition
ISO
19012-1
ISO
19013-1
ISO
ISO
ISO
ISO
19013-2
19018
19019
19054
ISO
19058
ISO
19072-1
ISO
19072-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
19078
19092-1
19101
19105
19106
19107
19108 CORR 1
19108
19109
19110
19111
19112
19113
19114 CORR 1
19114
19115 CORR 1
19115
19116
19117
19118
19119
Optics and photonics ù Designation of microscope objectives ù Part 1: Flatness of field/Plan First Edition
Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels First Edition; Together
with ISO 19013-2 Replaces ISO 4639-1: 1987, ISO 4639-2: 1995, ISO 4639-3: 1995
Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels First Edition; Together
with ISO 19013-1 Replaces ISO 4639-1: 1987, ISO 4639-2: 1995, ISO 4639-3: 1995
Ships and marine technology Terms, abbreviations, graphical symbols and concepts on navigation First Edition
Sea-going vessels and marine technology Instructions for planning, carrying out and reporting sea trials First Edition
Rail systems for supporting medical equipment First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Broadband Private Integrated Services
Network - Inter-Exchange Signalling Protocol - Generic Functional Protocol First Edition
Road vehicles ù Connection interface for pyrotechnic devices, two-way and three-way connections ù Part 1: Pocket interface
definition First Edition
Road vehicles ù Connection interface for pyrotechnic devices, two-way and three-way connections ù Part 2: Test methods and
general performance requirements First edition
Gas cylinders Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural
gas as a fuel for automotive vehicles First Edition
Financial services Biometrics Part 1: Security framework First Edition
Geographic Information - Reference Model First Edition
Geographic Information - Conformance and Testing First Edition
Geographic information Profiles First Edition
Geographic information Spatial schema First Edition
Geographic information ù Temporal schema First Edition
Geographic information ù Temporal schema First Edition
Geographic information Rules for application schema First Edition
Geographic information Methodology for feature cataloguing First Edition
Geographic Information - Spatial Referencing by Coordinates Second Edition
Geographic information Spatial referencing by geographic identifiers First Edition
Geographic information Quality principles First Edition
Geographic information ù Quality evaluation procedures TECHNICAL CORRIGENDUM 1 First Edition
Geographic information ù Quality evaluation procedures First Edition
Geographic information ù Metadata TECHNICAL CORRIGENDUM 1 First Edition
Geographic Information - Metadata First Edition
Geographic information Positioning services First Edition
Geographic information Portrayal First edition
Geographic information Encoding First Edition
Geographic information Services First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
19123
19125-1
19125-2
19128
19131
19133
19134
19135
19136
19137
19212
19219
ISO
19220
ISO
19232-1 CORR 1
ISO
19232-1
ISO
19232-2 CORR 1
ISO
ISO
19232-2
19232-3
ISO
19232-4
ISO
19232-5
ISO
ISO
19238
19258
ISO
ISO
19318
19334
ISO
ISO
19338
19353
Geographic information Schema for coverage geometry and functions First Edition
Geographic information Simple feature access Part 1: Common architecture First Edition
Geographic information Simple feature access Part 2: SQL option First Edition
Geographic information - Web map server interface First Edition
Geographic information ù Data product specifications First Edition
Geographic information Locationbased services Tracking and navigation First Edition
Geographic information ù Location-based services ù Multimodal routing and navigation First Edition
Geographic information Procedures for item registration First Edition
Geographic information ù Geography Markup Language (GML) First Edition
Geographic information ù Core profile of the spatial schema First Edition
Adhesives Determination of temperature dependence of shear strength First Edition
Animal and Vegetable Fats and Oils - Determination of Visible Foots in Crude Fats and Oils First Edition
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Styrene copolymer blends (SAN +
PVC) First Edition
Non-destructive testing ù Image quality of radiographs ù Part 1: Image quality indicators (wire type) ù Determination of image quality
value TECHNICAL CORRIGENDUM 1 First Edition
Non-destructive testing Image quality of radiographs Part 1: Image quality indicators (wire type) Determination of image quality
value First Edition
Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image
quality value, TECHNICAL CORRIGENDUM 1 First Edition
Non-destructive testing Image quality of radiographs Part 2: Image quality indicators (step/hole type) Determination of image quality
value First Edition
Non-destructive testing Image quality of radiographs Part 3: Image quality classes for ferrous metals First Edition
Non-destructive testing Image quality of radiographs Part 4: Experimental evaluation of image quality values and image quality
tables First Edition
Non-destructive testing Image quality of radiographs Part 5: Image quality indicators (duplex wire type) Determination of image
unsharpness value First Edition
Radiation protection Performance criteria for service laboratories performing biological dosimetry by cytogenetics First Edition
Soil quality Guidance on the determination of background values First Edition
Surface chemical analysis X-ray photoelectron spectroscopy Reporting of methods used for charge control and charge correction
First Edition
Binders for paints and varnishes Gum rosin Gas-chromatographic analysis First Edition
Performance and assessment requirements for design standards on structural concrete TECHNICAL CORRIGENDUM 1 Second
edition
Safety of machinery Fire prevention and protection First Edition
ISO
ISO
19378
19379
ISO
19432
ISO
ISO
ISO
ISO
19438
19439 CORR 1
19439
19458
ISO
19459
ISO
19460
ISO
ISO
ISO
19472
19493
19499
ISO
ISO
ISO
ISO
ISO
ISO
19500-2
19501
19502
19503
19579
19701
ISO
19702
ISO
ISO
ISO
ISO
19703
19706
19732
19739
ISO
19752
Lubricants, Industrial Oils and Related Products (Class L) - Machine-Tool Lubricants -0 Categories and Specifications First Edition;
Replaces ISO TR 3498 and ISO TR 10481
Ships and marine technology ECS databases Content, quality, updating and testing First Edition
Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety
requirements and testing First Edition
Diesel fuel and petrol filters for internal combustion engines Filtration efficiency using particle counting and contaminant retention
capacity First Edition; Corrected Version: 6/15/2004
Enterprise integration ù Framework for enterprise modelling TECHNICAL CORRIGENDUM 1 First Edition
Enterprise integration ù Framework for enterprise modelling First Edition
Water quality Sampling for microbiological analysis First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Single Step Call Transfer Supplementary Service First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Single Step Call Transfer Supplementary Service Second Edition
Machinery for forestry Winches Dimensions, performance and safety First Edition; Corr 1: 11/1/2006; Replaces ISO 4254-4:1990,
ISO 6816:1984 and ISO 6687:1994
Water quality ù Guidance on marine biological surveys of hard-substrate communities First Edition
Mechanical vibration ù Balancing ù Guidance on the use and application of balancing standards First Edition
Information Technology - Open Distributed Processing - Part 2: General Inter-ORB Protocol (GIOP)/Internet Inter-ORB Protocol
(IIOP) First Edition
Information technology Open Distributed Processing Unified Modeling Language (UML) Version 1.4.2 First edition
Information technology Meta Object Facility (MOF) First Edition
Information technology XML Metadata Interchange (XMI) First Edition
Solid mineral fuels Determination of sulfur by IR spectrometry First Edition
Methods for sampling and analysis of fire effluents First Edition; Replaces ISO TR 9122-3
Toxicity testing of fire effluents Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis First Edition
Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in
experimental fires First edition
Guidelines for assessing the fire threat to people First edition [Cancelled: ISO TS 19706] [Superseded: ISO TS 19706]
Equipment for crop protection ù Sprayer filters ù Colour coding for identification First Edition
Natural gas Determination of sulfur compounds using gas chromatography First Edition
Information technology Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and
multi-function devices that may contain printer components First Edition
ISO
19757-2 AMD 1
ISO
19757-2
ISO
19757-3
ISO
ISO
19757-4
19761
ISO
19762-1
ISO
19762-2
ISO
ISO
19762-3
19763-1
ISO
ISO
ISO
19763-3
19770-1
19784-1
ISO
19784-1 FDAM 1
ISO
ISO
19784-2
19785-1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
19785-2
19790
19794-1
19794-2
19794-3
19794-4
19794-5
ISO
ISO
19794-5 FDA 1
19794-6
Information technology ù Document Schema Definition Language (DSDL) ù Part 2: Regular-grammar-based validation ù RELAX NG
AMENDMENT 1: Compact Syntax First Edition
Information technology ù Document Schema Definition Language (DSDL) ù Part 2: Regular-grammar-based validation ù RELAX NG
First Edition
Information technology Document Schema Definition Languages (DSDL) Part 3: Rule-based validation Schematron First Edition
Information technology Document Schema Definition Languages (DSDL) Part 4: Namespace-based Validation Dispatching
Language (NVDL) First Edition
Software Engineering - COSMIC-FFP - A Functional Size Measurement Method First Edition
Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms
relating to AIDC First edition
Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 2: Optically
readable media (ORM) First edition
Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 3: Radio
frequency identification (RFID) First edition
Information technology ù Metamodel framework for interoperability (MFI) ù Part 1: Reference model First edition
Information technology Metamodel framework for interoperability (MFI) Part 3: Metamodel for ontology registration First Edition
Information technology Software asset management Part 1: Processes First edition
Information technology Biometric application programming interface Part 1: BioAPI specification First Edition
Information technology ù Biometric application programming interface Part 1: BioAPI specification AMENDMENT 1: BioGUI
specification
Information technology ù Biometric application programming interface ù Part 2: Biometric archive function provider interface First
Edition
Information technology Common Biometric Exchange Formats Framework Part 1: Data element specification First Edition
Information technology Common Biometric Exchange Formats Framework Part 2: Procedures for the operation of the Biometric
Registration Authority First Edition
Information technology Security techniques Security requirements for cryptographic modules First Edition
Information technology Biometric data interchange formats Part 1: Framework First Edition
Information technology Biometric data interchange formats Part 2: Finger minutiae data First Edition
Information technology Biometric data interchange formats Part 3: Finger pattern spectral data First Edition
Information technology Biometric data interchange formats Part 4: Finger image data First Edition
Information technology - Biometric data interchange formats - Part 5: Face image data First Edition
Information technology ù Biometric data interchange formats ù Part 5: Face image data AMENDMENT 1: Conditions for taking
photographs for face image data
Information technology Biometric data interchange formats Part 6: Iris image data First Edition
ISO
ISO
ISO
ISO
ISO
19794-7
19794-8
19794-9
19794-10
19795-1
ISO
19796-1
ISO
ISO
19798
19799
Information technology ù Biometric data interchange formats ù Part 7: Signature/sign time series data First Edition
Information technology Biometric data interchange formats Part 8: Finger pattern skeletal data First Edition
Information technology ù Biometric data interchange formats ù Part 9: Vascular image data First Edition
Information technology ù Biometric data interchange formats ù Part 10: Hand geometry silhouette data First Edition
Information technology Biometric performance testing and reporting Part 1: Principles and framework First Edition
Information technology Learning, education and training Quality management, assurance and metrics Part 1: General approach
First Edition
Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components
First Edition
Information technology ù Method of measuring gloss uniformity on printed pages
ISO
19812
Road vehicles M10 Î 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings First Edition
ISO
ISO
19813
19819
ISO
ISO
19840
19860
ISO
19879 CORR 1
ISO
ISO
19879
19900
ISO
19901-1
ISO
19901-2
ISO
19901-4
ISO
19901-5
ISO
ISO
19901-7
19903
Road vehicles Ignition systems Test methods and requirements for high voltage boots on plug-top coils and pencil coils First Edition
Metallic materials Tensile testing in liquid helium First Edition
Paints and varnishes Corrosion protection of steel structures by protective paint systems Measurement of, and acceptance criteria
for, the thickness of dry films on rough surfaces First Edition
Gas turbines Data acquisition and trend monitoring system requirements for gas turbine installations First edition
Metallic tube connections for fluid power and general use ù Test methods for hydraulic fluid power connections TECHNICAL
CORRIGENDUM 1 First Edition
Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections First Edition;
Supersedes ISO 8434-5:1995
Petroleum and Natural Gas Industries - General Requirements for Offshore Structures First Edition
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating
considerations First Edition
Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria
First Edition
Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design
considerations First Edition
Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and
construction First Edition
Petroleum and natural gas industries Specific requirements for offshore structures Part 7: Stationkeeping systems for floating
offshore structures and mobile offshore units First Edition; Replaces ISO TR 13637
Petroleum and natural gas industries Fixed concrete offshore structures First Edition
ISO
19904-1
Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars First Edition
ISO
19921
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
19922
19932-1
19932-2
19933
19952
19953
19954
19956
19957 CORR 1
19957
19958
19959
19960
19973-1
19973-2
19973-3
19973-4
19980
20000-1
20000-2
ISO
20019
ISO
20022-1
ISO
20022-2
ISO
ISO
ISO
20022-2
20032
20060
ISO
20061
Ships and marine technology Fire resistance of metallic pipe components with resilient and elastomeric seals Test methods First
Edition
Ships and marine technology Fire resistance of metallic pipe components with resilient and elastomeric seals Requirements
imposed on the test bench First Edition
Equipment for crop protection Knapsack sprayers Part 1: Requirements and test methods First Edition
Equipment for crop protection Knapsack sprayers Part 2: Performance limits First Edition
Space systems - Format for spacecraft launch environment test report First Edition
Footwear Vocabulary Chaussures Vocabulaire First edition
Footwear Test methods for heels Resistance to lateral impact First Edition
Footwear Test methods for whole shoe Washability in a domestic washing machine First Edition
Footwear Test methods for heels Fatigue resistance First Edition
Footwear ù Test methods for heels ù Heel pin holding strength TECHNICAL CORRIGENDUM 1 First Edition
Footwear ù Test methods for heels ù Heel pin holding strength First Edition
Footwear Test methods for heels and top pieces Top piece retention strength First Edition
Visual examination of the surface condition of investment castings Steel, nickel alloys and cobalt alloys First edition
Cast steels and alloys with special physical properties First edition
Pneumatic fluid power - Assessment of component reliability by testing - Part 1: General procedures First Edition
Pneumatic fluid power ù Assessment of component reliability by testing ù Part 2: Directional control valves First Edition
Pneumatic fluid power - Assessment of component reliability by testing - Part 3: Cylinders with piston rod First Edition
Pneumatic fluid power ù Assessment of component reliability by testing ù Part 4: Pressure regulators First Edition
Ophthalmic instruments Corneal topographers First Edition
Information technology - Service management - Part 1: Specification First Edition
Information technology - Service management - Part 2: Code of practice First Edition
Agricultural Vehicles - Mechanical Connections on Towed Vehicles - Dimensions for Hitch Rings First Edition; Technical Corrigendum
1: 10/1/2004
Financial services UNIversal Financial Industry message scheme Part 1: Overall methodology and format specifications for inputs to
and outputs from the ISO 20022 Repository First Edition
Financial services ù UNIversal Financial Industry message scheme ù Part 2: Roles and responsibilities of the registration bodies
Second Edition
Financial services UNIversal Financial Industry message scheme Part 2: Roles and responsibilities of the registration bodies First
Edition
Method for evaluation of tensile properties of metallic superplastic materials First edition
Information Technology - Open Terminal Architecture (OTA) Specification - Virtual Machine Specification First Edition
Information Technology - 12,65 mm Wide Magnetic Tape Cassette for Information Interchange - Helical Scan Recording - DTF-2 First
Edition
ISO
20062
ISO
ISO
20079
20081
ISO
20113
ISO
20114
ISO
20115
ISO
20116
ISO
20117
ISO
ISO
20126
20127
ISO
ISO
20128
20160
ISO
20161
ISO
ISO
20162
20176
ISO
ISO
20179
20182
ISO
20200
ISO
20202
Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - VXA-1 Format
First Edition
Water quality Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) Duckweed growth
inhibition test First Edition
Zinc and zinc alloys Method of sampling Specifications First Edition
Information technology Telecommunications and information exchange between systems Private Integrated Services Network
Specification, functional model and information flows Make call request supplementary service First Edition
Information technology Telecommunications and information exchange between systems Private Integrated Services Network
(PISN) Inter-exchange signalling rotocol Make call request supplementary service First Edition
Information technology Telecommunications and information exchange between systems Private Integrated Services Network Use
of QSIG for Message Centre Access (MCA) profile standard First Edition
Information technology Telecommunications and information exchange between systems Private Integrated Services Network
Specification, functional model and information flows Message centre monitoring and mailbox identification supplementary services
First Edition
Information technology Telecommunications and information exchange between systems Private Integrated Services Network
Interexchange signalling protocol Message centre monitoring and mailbox identification supplementary services First Edition
Dentistry - Manual toothbrushes - General requirements and test methods First Edition; Together with ISO 22254 Replaces ISO
8627:1987
Dentistry Powered toothbrushes General requirements and test methods First Edition
Milk products Enumeration of presumptive Lactobacillus acidophilus on a selective medium Colony-count technique at 37 C First
Edition; See also IDF 192
Implants for surgery Metallic materials Classification of microstructures for alpha+beta titanium alloy bars First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Use of QSIG at the C Reference Point between a PINX and an Interconnecting Network First Edition
Information Technology - Data Interchange on 300 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using
Irreversible Effects - Capacity: 30 Gbytes Per Cartridge First Edition
Road vehicles H-point machine (HPM II) Specifications and procedure for H-point determination First Edition
Water quality Determination of microcystins Method using solid phase extraction (SPE) and high performance liquid
chromatography (HPLC) with ultraviolet (UV) detection First Edition
Refractory test piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns First Edition
Plastics Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratoryscale test First Edition
Carbonaceous materials used in the production of aluminium Cold and tepid ramming pastes Preparation of baked test pieces and
determination of loss on baking First Edition
ISO
ISO
ISO
ISO
20203
20242-1
20252
20279
ISO
ISO
20280
20282-1
ISO
ISO
ISO
ISO
ISO
ISO
20283-3
20299-1
20299-2
20301
20302
20340
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
20341
20344 AMD 1
20344 CORR 1
20344
20345 AMD 1
20345 CORR 2
20345 CORR 1
20345
20346 AMD 1
20346 CORR 2
20346 CORR 1
20346
20347 AMD 1
20347 CORR 2
20347 CORR 1
20347
20361
20392
20393
20394
Carbonaceous materials used in the production of aluminium Calcined coke Determination of crystallite size of calcined petroleum
coke by X-ray diffraction First edition
Industrial automation systems and integration Service interface for testing applications Part 1: Overview First Edition
Market, opinion and social research Vocabulary and service requirements First Edition
Soil quality Extraction of thallium and determination by electrothermal atomic absorption spectrometry First Edition
Soil quality ù Determination of arsenic, antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation
atomic absorption spectrometry First Edition
Ease of operation of everyday products Part 1: Design requirements for context of use and user characteristics First Edition
Mechanical vibration Measurement of vibration on ships Part 3: Pre-installation vibration measurement of shipboard equipment First
Edition
Film for wrapping rubber bales Part 1: Butadiene rubber (BR) and styrenebutadiene rubber (SBR) First Edition
Film for wrapping rubber bales Part 2: Natural rubber First Edition
Health informatics Health cards General characteristics First Edition
Health informatics Health cards Numbering system and registration procedure for issuer identifiers First Edition
Paints and varnishes Performance requirements for protective paint systems for offshore and related structures First Edition
Surface chemical analysis Secondary-ion mass spectrometry Method for estimating depth resolution parameters with multiple deltalayer reference materials First Edition
Personal protective equipment ù Test methods for footwear AMENDMENT 1 First Edition
Personal protective equipment ù Test methods for footwear TECHNICAL CORRIGENDUM 1 First Edition
Personal protective equipment ù Test methods for footwear First Edition [Replaced: ISO 8782-1]
Personal protective equipment ù Safety footwear AMENDMENT 1 First Edition
Personal protective equipment ù Safety footwear TECHNICAL CORRIGENDUM 2 First Edition
Personal protective equipment ù Safety footwear TECHNICAL CORRIGENDUM 1 First Edition
Personal protective equipment ù Safety footwear First Edition
Personal protective equipment ù Protective footwear AMENDMENT 1 First Edition
Personal protective equipment ù Protective footwear TECHNICAL CORRIGENDUM 2 First Edition
Personal protective equipment ù Protective footwear TECHNICAL CORRIGENDUM 1 First Edition
Personal protective equipment ù Protective footwear First Edition
Personal protective equipment ù Occupational footwear; Amendment 1 First Edition
Personal protective equipment ù Occupational footwear TECHNICAL CORRIGENDUM 2 First Edition
Personal protective equipment ù Occupational footwear TECHNICAL CORRIGENDUM 1 First Edition
Personal protective equipment ù Occupational footwear First Edition [Replaced: ISO 8782-4]
Liquid pumps and pump units ù Noise test code ù Grades 2 and 3 of accuracy First Edition
Thermal-insulating materials ù Determination of compressive creep First Edition
Thermal-insulating materials ù Determination of long-term water absorption by diffusion First Edition
Thermal-insulating materials ù Determination of freeze-thaw resistance First Edition
Pneumatic fluid power systems ù Directional control valves ù Specification of pin assignment for electrical round connectors of
diameters 8 mm and 12 mm TECHNICAL CORRIGENDUM 1 First Edition
Pneumatic fluid power systems ù Directional control valves ù Specification of pin assignment for electrical round connectors of
diameters 8 mm and 12 mm First Edition
ISO
20401 CORR 1
ISO
20401
ISO
ISO
ISO
20421-1
20421-2
20433
ISO
20462-1
ISO
20462-2 CORR 1
ISO
20462-2
Photography - Psychophysical experimental methods for estimating image quality - Part 2: Triplet comparison method First Edition
ISO
ISO
ISO
20462-3
20473
20482
Photography - Psychophysical experimental methods for estimating image quality - Part 3: Quality ruler method First Edition
Optics and photonics ù Spectral bands First Edition
Metallic materials Sheet and strip Erichsen cupping test First Edition
ISO
ISO
20483
20501
ISO
20502
ISO
20504
ISO
20505
ISO
ISO
20506
20507
ISO
20508
ISO
20509
Cryogenic vessels Large transportable vacuum-insulated vessels Part 1: Design, fabrication, inspection and testing First Edition
Cryogenic vessels Large transportable vacuum-insulated vessels Part 2: Operational requirements First Edition
Leather Tests for colour fastness Colour fastness to crocking First Edition
Photography - Psychophysical experimental methods for estimating image quality - Part 1: Overview of psychophysical elements First
Edition
Photography ù Psychophysical experimental methods for estimating image quality ù Part 2: Triplet comparison method TECHNICAL
CORRIGENDUM 1 First Edition
Cereals and pulses Determination of the nitrogen content and calculation of the crude protein content Kjeldahl method First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Weibull statistics for strength data First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing
First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for compressive behaviour of continuous fibrereinforced composites at room temperature First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of the interlaminar shear strength of continuousfibre-reinforced composites at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test First
Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of the in-plane shear strength of continuous-fibrereinforced composites at ambient temperature by the Iosipescu test First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Vocabulary First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of light transmittance of ceramic films with
transparent substrate First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of oxidation resistance of non-oxide monolithic
ceramics First Edition
ISO
20552
ISO
ISO
20553
20562
ISO
ISO
ISO
20563
20566
20567-1
ISO
20567-2
ISO
20585
ISO
ISO
ISO
ISO
20623
20643
20645
20652
ISO
ISO
ISO
20653
20672
20673
ISO
20683-1
ISO
ISO
20683-2
20685
ISO
ISO
20712-2
20723
ISO
20725
ISO
20726
ISO
20727
Workplace air ù Determination of mercury vapour ù Method using goldamalgam collection and analysis by atomic absorption
spectrometry or atomic fluorescence spectrometry First edition
Radiation protection Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material First
Edition
Tyre valves ISO core chambers No. 1, No. 2 and No. 3 First Edition; Replaces ISO 6762:1982 and ISO 7442:1982
Information Technology - 80 mm (1,23 Gbytes Per Side) and 120 mm (3,95 Gbytes Per Side) DVD-Recordable Disk (DVD-R) First
Edition
Paints and varnishes Determination of the scratch resistance of a coating system using a laboratory car-wash First Edition
Paints and varnishes Determination of stone-chip resistance of coatings Part 1: Multi-impact testing First Edition
Paints and varnishes Determination of stone-chip resistance of coatings Part 2: Single-impact test with a guided impact body First
Edition
Wood-based panels Determination of wet bending strength after immersion in water at 70 C or 100 C (boiling temperature) First
Edition
Petroleum and related products Determination of the extreme-pressure and anti-wear properties of fluids Four ball method
(European conditions) First Edition
Mechanical vibration Hand-held and hand-guided machinery Principles for evaluation of vibration emission First Edition
Textile fabrics Determination of antibacterial activity Agar diffusion plate test First Edition
Space data and information transfer systems Producerûarchive interface Methodology abstract standard First Edition
Road vehicles Degrees of protection (IP-Code) Protection of electrical equipment against foreign objects, water and access First
Edition
Ships and marine technology -- Rate of turn indicators First Edition
Ships and marine technology - Electric rudder angle indicators First Edition
Aircraft ground equipment Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear
Part 1: Main-line aircraft First Edition
Aircraft ground equipment Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with noselanding gear
Part 2: Regional aircraft First Edition
3-D scanning methodologies for internationally compatible anthropometric databases First Edition
Water safety signs and beach safety flags ù Part 2: Specifications for beach safety flags ù Colour, shape, meaning and performance
First Edition
Structural steels Surface condition of hot-rolled sections Delivery requirements First Edition
Textile machinery Condensers for cotton spinning Vocabulary and principles of construction MatÚriel pour l'industrie textile
Condenseurs pour la filature du coton Vocabulaire et principes de construction First Edition
Textile machinery Hopper feeders for cotton spinning Vocabulary and principles of construction MatÚriel pour l'industrie textile
Chargeuses pour la filature du coton Vocabulaire et principes de construction First Edition
Textile machinery Mixing bale openers for cotton spinning Vocabulary and principles of construction MatÚriel pour l'industrie textile
Briseballes mÚlangeurs pour la filature du coton Vocabulaire et principes de construction First Edition
ISO
ISO
ISO
ISO
20730
20743
20752
20763
ISO
20764
ISO
20765-1
ISO
20773
ISO
20774
ISO
20776-1
ISO
20776-2
ISO
20783-1
Gas cylinders Refillable welded aluminium-alloy cylinders Design, construction and testing First Edition
Textiles ù Determination of antibacterial activity of antibacterial finished products First Edition
Cork stoppers ù Determination of releasable 2, 4, 6-trichloroanisol (TCA) First edition
Petroleum and related products Determination of anti-wear properties of hydraulic fluids Vane pump method First Edition
Petroleum and related products Preparation of a test portion of highboiling liquids for the determination of water content Nitrogen
purge method First Edition
Natural gas Calculation of thermodynamic properties Part 1: Gas phase properties for transmission and distribution applications
First Edition
Cigarettes ù Determination of nicotinefree dry particulate matter and nicotine in sidestream smoke ù Method using a routine analytical
linear smoking machine equipped with a fishtail chimney First Edition
Cigarettes ù Determination of carbon monoxide in sidestream smoke ù Method using a routine analytical linear smoking machine
equipped with a fishtail chimney First Edition
Clinical laboratory testing and in vitro diagnostic test systems Susceptibility testing of infectious agents and evaluation of
performance of antimicrobial susceptibility test devices Part 1: Reference method for testing the in vitro activity of antimicrobial
agents against rapidly growing aerobic bacteria involved in infectious diseases First Edition
Clinical laboratory testing and in vitro diagnostic test systems ù Susceptibility testing of infectious agents and evaluation of
performance of antimicrobial susceptibility test devices ù Part 2: Evaluation of performance of antimicrobial susceptibility test devices
First Edition
Petroleum and related products Determination of emulsion stability of fire-resistant fluids Part 1: Fluids in category HFAE First
Edition
ISO
ISO
20783-2
20785-1
Petroleum and related products Determination of emulsion stability of fire-resistant fluids Part 2: Fluids in category HFB First Edition
Dosemetry for exposures to cosmic radiation in civilian aircraft Part 1: Conceptual basis for measurements First Edition
ISO
ISO
ISO
20805
20806
20807
ISO
20808
ISO
ISO
ISO
20823
20826
20828
ISO
20837
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming First Edition
Mechanical vibration Criteria and safeguards for the in-situ balancing of medium and large rotors First Edition
Non-destructive testing Qualification of personnel for limited applications of non-destructive testing First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of friction and wear characteristics of monolithic
ceramics by ball-on-disc method First Edition
Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold
ignition test First Edition
Automotive LPG components Containers First Edition
Road vehicles Security certificate management First Edition
Microbiology of food and animal feeding stuffs Polymerase chain reaction (PCR) for the detection of food-borne pathogens
Requirements for sample preparation for qualitative detection First Edition
Microbiology of food and animal feeding stuffs Polymerase chain reaction (PCR) for the detection of food-borne pathogens
Requirements for amplification and detection for qualitative methods First Edition
ISO
20838
ISO
ISO
20843
20846
ISO
20847
ISO
20848-1
Packaging Plastics drums Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l First Edition
ISO
20848-2
ISO
20848-3
Packaging Plastics drums Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l First Edition
Packaging Plastics drums Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l First
Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
20859
20863
20864
20865
20866
20867
20868
20869
20870
20871
20872
20873
20874
20875
20876
20877
ISO
20884
ISO
ISO
ISO
20903
20904
20905
Petroleum and related products Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC First edition
Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method First Edition
Petroleum products Determination of sulfur content of automotive fuels Energy-dispersive X-ray fluorescence spectrometry First
Edition
Cinematography Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film First Edition
Footwear Test methods for stiffeners and toepuffs Bondability First Edition
Footwear Test methods for stiffeners and toepuffs - Mechanical characteristics First Edition
Footwear - Test Methods for Outsoles - Compression Energy First Edition
Footwear - Test Methods for Insoles - Delamination Resistance First Edition
Footwear - Test Methods for Insoles - Heel Pin Holding Strength First Edition
Footwear - Test Methods for Insoles - Abrasion Resistance First Edition
Footwear - Test Methods for Outsoles, Insoles, Lining and Insocks - Water Soluble Content First Edition
Footwear - Ageing Conditionning First Edition
Footwear - Test Methods for Outsoles - Abrasion Resistance First Edition
Footwear - Test Methods for Outsoles - Tear Strength First Edition
Footwear - Test Methods for Outsoles - Dimensional Stability First Edition
Footwear - Test Methods for Outsoles - Needle Tear Strength First Edition
Footwear - Test Methods for Outsoles - Determination of Split Tear Strength and Delamination Resistance First Edition
Footwear - Test Methods for Insoles - Resistance to Stitch Tear First Edition
Footwear - Test Methods for Whole Shoe - Thermal Insulation First Edition
Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry
First Edition
Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Methods used to determine peak
intensities and information required when reporting results First Edition
Hard coal Sampling of slurries First Edition
Coal preparation Determination of dust/moisture relationship for coal First Edition
ISO
ISO
20926
20957-1
ISO
20957-2
ISO
20957-4
ISO
ISO
20957-5
20957-6
ISO
20957-7
ISO
20957-8
ISO
20957-9
ISO
ISO
ISO
ISO
ISO
20957-10
20963
20965
20966
20968
ISO
ISO
20970
20988
ISO
ISO
20998-1
21000-2
ISO
19795-2
ISO
ISO
21000-3 AMD 1
21000-3
ISO
21000-4
ISO
21000-4 FDAM 1
Software engineering IFPUG 4.1 Unadjusted functional size measurement method Counting practices manual First Edition
Stationary training equipment Part 1: General safety requirements and test methods First edition
Stationary training equipment Part 2: Strength training equipment, additional specific safety requirements and test methods First
edition
Stationary training equipment Part 4: Strength training benches, additional specific safety requirements and test methods First
Edition
Stationary training equipment Part 5: Pedal crank training equipment, additional specific safety requirements and test methods First
Edition
Stationary training equipment Part 6: Treadmills, additional specific safety requirements and test methods First Edition
Stationary training equipment - Part 7: Rowing machines, additional specific safety requirements and test method First Edition
Stationary training equipment - Part 8: Steppers, stairclimbers and climbers Additional specific safety requirements and test methods
First Edition
Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods First Edition
Stationary training equipment ù Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety
requirements and test methods First Edition
Soil quality Effects of pollutants on insect larvae (Oxythyrea funesta) Determination of acute toxicity First edition
Plastics Determination of the transient extensional viscosity of polymer melts First Edition
Automatic milking installations ù Requirements and testing First Edition
Software Engineering - Mk II Function Point Analysis - Counting Practices Manual First Edition
Information Technology - Programming Languages, Their Environments and System Software Interfaces - JEFF File Format First
Edition
Air quality ù Guidelines for estimating measurement uncertainty First Edition
Measurement and characterization of particles by acoustic methods Part 1: Concepts and procedures in ultrasonic attenuation
spectroscopy First Edition
Information technology Multimedia framework (MPEG-21) Part 2: Digital Item Declaration Second Edition
Information technology ù Biometric performance testing and reporting ù Part 2: Testing methodologies for technology and scenario
evaluation First Edition
Information technology ù Multimedia framework (MPEG-21) ù Part 3: Digital Item Identification AMENDMENT 1: Related identifier
types First Edition
Information Technology - Multimedia Framework (MPEG-21) - Part 3: Digital Item Identification First Edition
Information technology Multimedia framework (MPEG-21) Part 4: Intellectual Property Management and Protection Components
First Edition
Information technology ù Multimedia framework (MPEG-21) ù Part 4: Intellectual Property Management and Protection Components
AMENDMENT 1: IPMP components base profile First Edition
ISO
21000-5 AMD 2
ISO
ISO
21000-5 AMD 1
21000-5
ISO
21000-6 CORR 2
ISO
21000-6 AMD 1
ISO
ISO
21000-6 CORR 1
21000-6
ISO
21000-7 AMD 2
ISO
ISO
ISO
ISO
21000-7 AMD 1
21000-7
21000-8
21000-9
ISO
ISO
ISO
ISO
21000-10 AMD 1
21000-10
21000-15
21000-16
ISO
ISO
ISO
21000-17
21000-18
21004
ISO
ISO
21005
21006
ISO
21007-1
ISO
ISO
21007-2
21009-2
Information technology ù Multimedia framework (MPEG-21) ù Part 5: Rights Expression Language AMENDMENT 2: DAC
(Dissemination And Capture) profile First Edition
Information technology Multimedia framework (MPEG-21) - Part 5: Rights Expression Language AMENDMENT 1: MAM (Mobile And
optical Media) profile First Edition
Information technology Multimedia framework (MPEG-21) Part 5: Rights Expression Language First Edition
Information technology Multimedia framework (MPEG-21) Part 6: Rights Data Dictionary TECHNICAL CORRIGENDUM 2 First
Edition
Information technology ù Multimedia framework (MPEG-21) ù Part 6: Rights Data Dictionary AMENDMENT 1: Digital Item Identifier
relationship types First Edition
Information technology Multimedia framework (MPEG-21) Part 6: Rights Data Dictionary TECHNICAL CORRIGENDUM 1 First
Edition
Information technology Multimedia framework (MPEG-21) Part 6: Rights Data Dictionary First Edition
Information technology ù Multimedia framework (MPEG-21) ù Part 7: Digital Item Adaptation AMENDMENT 2: Dynamic and
Distributed Adaptation First Edition
Information technology ù Multimedia framework (MPEG-21) ù Part 7: Digital Item Adaptation AMENDMENT 1: DIA Conversions and
Permissions First Edition
Information technology ù Multimedia framework (MPEG-21) ù Part 7: Digital Item Adaptation First Edition
Information technology û Multimedia framework (MPEG-21) û Part 8: Reference Software First Edition
Information technology - Multimedia framework (MPEG-21) - Part 9: File Format First Edition
Information technology ù Multimedia framework (MPEG-21) ù Part 10: Digital Item Processing AMENDMENT 1: Additional C++
bindings First Edition
Information technology ù Multimedia framework (MPEG-21) ù Part 10: Digital Item Processing First Edition
Information technology Multimedia framework (MPEG-21) Part 15: Event Reporting First Edition
Information technology Multimedia framework (MPEG-21) Part 16: Binary Format First Edition
Information technology Multimedia framework (MPEG-21) Part 17: Fragment Identification of MPEG Resources First Edition
Information technology ù Multimedia framework (MPEG-21) ù Part 18: Digital Item Streaming First Edition
Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply First Edition
Ships and marine technology Thermally toughened safety-glass panes for windows and side scuttles First Edition; Replaces ISO
1095:1989 and 3254:1989
Internal combustion engines Engine weight (mass) declaration First Edition
Gas cylinders Identification and marking using radio frequency identification technology Part 1: Reference architecture and
terminology First Edition
Gas cylinders Identification and marking using radio frequency identification technology Part 2: Numbering schemes for radio
frequency identification First Edition
Cryogenic vessels Static vacuum insulated vessels Part 2: Operational requirements First Edition
ISO
ISO
21010
21012
Cryogenic vessels Gas/materials compatibility First Edition
Cryogenic vessels Hoses First Edition
ISO
ISO
ISO
ISO
ISO
21013-2
21013-3
21014
21015
21016
Cryogenic vessels ù Pressure-relief accessories for cryogenic service ù Part 2: Non-reclosable pressure-relief devices First Edition
Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination First Edition
Cryogenic vessels Cryogenic insulation performance First Edition
Office furniture ù Office work chairs ù Test methods for the determination of stability, strength and durability First Edition
Office furniture ù Tables and desks ù Test methods for the determination of stability, strength and durability First Edition
ISO
21028-1
ISO
21028-2
ISO
ISO
ISO
ISO
21029-2
21048
21049
21067
ISO
21069-1
ISO
ISO
21078-2
21093
ISO
21107
ISO
ISO
ISO
ISO
21117
21118
21127
21128
ISO
ISO
ISO
ISO
ISO
ISO
21129
21147
21148
21149
21150
21171
Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below - 80 C First Edition
Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 2: Temperatures between - 80 C and - 20
C First Edition
Cryogenic vessels Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 2: Operational requirements
First Edition
Plastics Epoxy resins Determination of 1,2-glycol content First Edition
Pumps Shaft sealing systems for centrifugal and rotary pumps First Edition
Packaging ù Vocabulary First Edition
Road vehicles Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester
Part 1: Pneumatic braking systems First Edition
Determination of boron(III) oxide in refractory products Part 2: Acid extraction method for the determination of boron(III) oxide in
binder components First Edition
Oil of dwarf pine (Pinus mugo Turra) First Edition
Rolling bearings and spherical plain bearings Search structure for electronic media Characteristics and performance criteria
identified by attribute vocabulary First Edition
Information technology - Office equipment - Copying machines and Multi-function devices - Information to be included in specification
sheets and related test methods First Edition
Information to be included in specification sheets Data projectors First Edition
Information and documentation A reference ontology for the interchange of cultural heritage information First Edition
Cork Stoppers Determination of Oxidizing Residues Iodometric Titration Method First Edition
Hygrothermal performance of building materials and products - Determination of water-vapour transmission properties - Box method
First Edition
Fine-Cut Tobacco and Smoking Articles Made From It - Survey and Analysis of Consumer-Made Articles First Edition
Cosmetics Microbiology General instructions for microbiological examination First Edition
Cosmetics Microbiology Enumeration and detection of aerobic mesophilic bacteria First Edition
Cosmetics Microbiology Detection of Escherichia coli First Edition
Medical gloves Determination of removable surface powder First Edition
ISO
ISO
ISO
ISO
ISO
ISO
21178
21179
21180
21181
21182
21183-1
ISO
ISO
21183-2
21188
ISO
ISO
ISO
21207
21214
21227-1
ISO
21227-2
ISO
21227-3
ISO
ISO
ISO
21238
21247
21270
ISO
ISO
21281
21287
ISO
21308-2
ISO
21308-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
21329
21347
21348
21349
21350
21351
21358
Light conveyor belts - Determination of electrical resistances First Edition
Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt First Edition
Light conveyor belts - Determination of the maximum tensile strength First Edition
Light conveyor belts Determination of the relaxed elastic modulus First Edition
Light conveyor belts Determination of the coefficient of friction First Edition
Light conveyor belts Part 1: Principal characteristics and applications First Edition
Light conveyor belts Part 2: List of equivalent terms Courroies transporteuses lÚg×res Partie 2: Liste des termes Úquivalents First
Edition
Public key infrastructure for financial services Practices and policy framework First Edition
Corrosion tests in artificial atmospheres Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases,
neutral salt-spray and drying First Edition
Intelligent transport systems Continuous air interface, long and medium range (CALM) Infra-red systems First Edition
Paints and varnishes Evaluation of defects on coated surfaces using optical imaging Part 1: General guidance First Edition
Paints and varnishes Evaluation of defects on coated surfaces using optical imaging Part 2: Evaluation procedure for multi-impact
stone-chipping test First Edition
Paints and varnishes ù Evaluation of defects on coated surfaces using optical imaging ù Part 3: Evaluation of delamination and
corrosion around a scribe First Edition
Nuclear energy ù Nuclear fuel technology ù Scaling factor method to determine the radioactivity of low- and intermediate-level
radioactive waste packages generated at nuclear power plants First Edition
Combined accept-zero sampling systems and process control procedures for product acceptance First edition
Surface chemical analysis X-ray photoelectron and Auger electron spectrometers Linearity of intensity scale First Edition
Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks Rules for the construction and layout of
pedals First Edition
Pneumatic fluid power Cylinders Compact cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm First Edition
Road vehicles Product data exchange between chassis and bodywork manufacturers (BEP) Part 2: Dimensional bodywork
exchange parameters First Edition
Road vehicles ù Product data exchange between chassis and bodywork manufacturers (BEP) ù Part 3: General, mass and
administrative exchange parameters First Edition
Petroleum and natural gas industries Pipeline transportation systems Test procedures for mechanical connectors First Edition
Space systems Fracture and damage control First edition
Space environment (natural and artificial) ù Process for determining solar irradiances First Edition
Space systems ù Project reviews First Edition
Space systems ù Off-the-shelf item utilization First Edition
Space systems Functional and technical specifications First edition
Vacuum technology ù Right-angle valve ù Dimensions and interfaces for pneumatic actuator First edition
ISO
21360
ISO
21367
ISO
ISO
ISO
ISO
21368
21389
21390
21398
ISO
21407
ISO
21408
ISO
21409
ISO
21410
ISO
ISO
21411
21413
ISO
21415-1
ISO
21415-2
ISO
21415-3
ISO
21415-4
ISO
21427-1
ISO
21427-2
ISO
ISO
ISO
21459
21460
21461
Vacuum technology ù Standard methods for measuring vacuum-pump performance ù General description First Edition
Plastics ù Reaction to fire ù Test method for flame spread and combustion product release from vertically oriented specimens First
Edition
Adhesives Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of
such structures First Edition
Oil of gum turpentine, Chinese (mainly from Pinus massoniana Lamb.) First Edition
Oil of wintergreen, China [Gaultheria yunnanensis (Franch.) Rehd.], redistilled First Edition
Hard coal and coke - Guidance to the inspection of mechanical sampling systems First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Simple Dialog Supplementary Service First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Simple Dialog Supplementary Service Second Edition
Information technology Telecommunications and information exchange between systems Corporate telecommunication networks
Signalling interworking between QSIG and H.323 Generic functional protocol for the support of supplementary services First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Corporate Telecommunication
Networks - Signalling Interworking between QSIG and H.323 - Call Transfer Supplementary Services First Edition
Information technology Telecommunications and information exchange between systems Corporate telecommunication networks
Signalling interworking between QSIG and H.323 Call diversion supplementary services First Edition
Manual methods for the measurement of a groundwater level in a well First Edition
Wheat and wheat flour Gluten content Part 1: Determination of wet gluten by a manual method First Edition; Together with ISO
21415-2 supersedes ISO 5531: 1978
Wheat and wheat flour Gluten content Part 2: Determination of wet gluten by mechanical means First Edition [Superseded: ISO
5531] [Superseded By: ISO 7495]
Wheat and wheat flour Gluten content Part 3: Determination of dry gluten from wet gluten by an oven drying method First Edition;
Together with ISO 21415-4 supersedes ISO 6645: 1981
Wheat and wheat flour Gluten content Part 4: Determination of dry gluten from wet gluten by a rapid drying method First Edition;
Together with ISO 21415-3 supersedes ISO 6645: 1981
Water quality Evaluation of genotoxicity by measurement of the induction of micronuclei Part 1: Evaluation of genotoxicity using
amphibian larvae First Edition
Water quality Evaluation of genotoxicity by measurement of the induction of micronuclei Part 2: Mixed population method using the
cell line V79 First Edition
Space data and information transfer systems Proximity-1 space link protocol Coding and synchronization sublayer First Edition
Space data and information transfer systems Proximity-1 space link protocol Physical layer First Edition
Rubber Determination of the aromaticity of oil in vulcanized rubber compounds First Edition
ISO
ISO
21467
21469
ISO
ISO
ISO
21481
21485
21487
ISO
21501-2
ISO
21501-3
ISO
ISO
ISO
21501-4
21507
21509
ISO
21528-1
Earth-moving machinery Horizontal directional drills Terminology and specifications First Edition
Safety of Machinery Lubricants with Incidental Product Contact Hygiene Requirements First Edition
Information technology Telecommunications and information exchange between systems Near Field Communication Interface and
Protocol -2 (NFCIP-2) First Edition
Textile machinery Draw frame for cotton spinning Vocabulary and principles of construction First Edition
Small craft Permanently installed petrol and diesel fuel tanks First Edition
Determination Of Particle Size Distribution -- Single Particle Light Interaction Methods -- Part 2: Light Scattering Liquid-Borne Particle
Counter First Edition [Superseded: ISO 13323-1]
Determination of particle size distribution ù Single particle light interaction methods ù Part 3: Light extinction liquid-borne particle
counter First Edition [Superseded: ISO 13323-1]
Determination of particle size distribution ù Single particle light interaction methods ù Part 4: Light scattering airborne particle counter
for clean spaces First Edition [Superseded: ISO 13323-1]
Earth-moving machinery - Performance requirements for non-metallic fuel tanks First Edition
Plastics and ebonite Verification of Shore durometers First Edition
Microbiology of food and animal feeding stuffs Horizontal methods for the detection and enumeration of Enterobacteriaceae Part 1:
Detection and enumeration by MPN technique with pre-enrichment First Edition; Together with ISO 21528-2, Cancels and Replaces
ISO 5552:1997, 7402:1993, and 8523:1991
ISO
ISO
ISO
ISO
21528-2
21530
21533
21534
Microbiology of food and animal feeding stuffs Horizontal methods for the detection and enumeration of Enterobacteriaceae Part 2:
Colony-count method First Edition; Together with ISO 21528-1, Cancels and Replaces ISO 5552:1997, 7402:1993, and 8523:1991
Dentistry Materials used for dental equipment surfaces Determination of resistance to chemical disinfectants First Edition
Dentistry Reusable cartridge syringes intended for intraligamentary injections First Edition
Non-active surgical implants Joint replacement implants Particular requirements Second edition
ISO
21535
ISO
ISO
ISO
21536
21537-1
21537-2
Non-active surgical implants ù Joint replacement implants ù Specific requirements for hip-joint replacement implants Second Edition
Non-active surgical implants ù Joint replacement implants ù Specific requirements for knee-joint replacement implants Second
Edition
Clamping flanges for superabrasive cutting-off wheels Part 1: Natural stone First Edition
Clamping flanges for superabrasive cutting-off wheels Part 2: Building and construction First Edition
ISO
ISO
ISO
ISO
ISO
ISO
21538
21543
21549-1
21549-2
21549-3
21549-4
Blanks for superabrasive cutting-off wheels Mounting and fixing bores Building construction and civil engineering First Edition
Milk products Guidelines for the application of near infrared spectrometry First Edition
Health informatics Patient healthcard data Part 1: General structure First Edition
Health informatics Patient healthcard data Part 2: Common objects First Edition
Health informatics Patient healthcard data Part 3: Limited clinical data First Edition
Health informatics Patient healthcard data Part 4: Extended clinical data First Edition
ISO
ISO
ISO
ISO
21549-7
21550
21561
21567
ISO
21569
ISO
21570 CORR 1
ISO
21570
ISO
21571
ISO
21572 CORR 1
Health informatics ù Patient healthcard data ù Part 7: Medication data First edition
Photography Electronic scanners for photographic images Dynamic range measurements First Edition
Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR First Edition
Microbiology of food and animal feeding stuffs Horizontal method for the detection of Shigella spp. First Edition
Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Qualitative nucleic acid
based methods First Edition
Foodstuffs ù Methods of analysis for the detection of genetically modified organisms and derived products ù Quantitative nucleic acid
based methods TECHNICAL CORRIGENDUM 1 First Edition
Foodstuffs ù Methods of analysis for the detection of genetically modified organisms and derived products ù Quantitative nucleic acid
based methods First Edition
Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Nucleic acid extraction First
Edition
Foodstuffs ù Methods for the detection of genetically modified organisms and derived products ù Protein based methods
TECHNICAL CORRIGENDUM 1 First Edition
ISO
21572
Foodstuffs ù Methods for the detection of genetically modified organisms and derived products ù Protein based methods First Edition
ISO
21573-1
ISO
21587-1
ISO
21587-2
ISO
21587-3
ISO
ISO
ISO
ISO
ISO
ISO
21592
21606
21627-1
21627-2
21627-3
21630
ISO
21647 CORR 1
ISO
ISO
21647
21649
Building construction machinery and equipment Concrete pumps Part 1: Terminology and commercial specifications First Edition
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) ù Part 1: Apparatus, reagents,
dissolution and gravimetric silica First Edition
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) ù Part 2: Wet chemical
analysis First Edition
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) ù Part 3: Inductively coupled
plasma and atomic absorption spectrometry methods First Edition
Building construction machinery and equipment Concrete spraying machines Terminology and commercial specifications First
Edition
Dentistry ù Elastomeric auxiliaries for use in orthodontics First Edition
Plastics - Epoxy Resins - Determination of Chlorine Content - Part 1: Inorganic Chlorine First Edition
Plastics - Epoxy Resins - Determination of Chlorine Content - Part 2: Easily Saponifiable Chlorine First Edition
Plastics - Epoxy Resins - Determination of Chlorine Content - Part 3: Total Chlorine First Edition
Pumps ù Testing ù Submersible mixers for wastewater and similar applications First Edition
Medical electrical equipment ù Particular requirements for the basic safety and essential performance of respiratory gas monitors
TECHNICAL CORRIGENDUM 1 First Edition
Medical electrical equipment ù Particular requirements for the basic safety and essential performance of respiratory gas monitors
First Edition [Replaced: ISO 7767, ISO 7767, ISO 9918, ISO 11196]
Needle-free injectors for medical use Requirements and test methods First Edition
ISO
ISO
ISO
21669
21670
21671
Steel wire ropes Determination of rotational properties First edition
Hexagon weld nuts with flange First Edition
Dentistry Rotary polishers First Edition
Carbonaceous materials used in the production of aluminium ù Determination of density by gas pyknometry (volumetric) using helium
as the analysis gas ù Solid materials First Edition
Glass in building Glass blocks Specification and test methods First Edition
Cinematography Method of measurement of perceived loudness of motion-picture audio material First Edition
Road vehicles Safety enhancement in conjunction with tyre inflation pressure monitoring First Edition
Gears - Cylindrical involute gears and gear pairs - Concepts and geometry First Edition [Cancelled: ISO TR 4467]
Industrial valves - Globe valves of thermoplastics materials First Edition
Microbiology of food and animal feeding stuffs Determination of water activity First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
21687
21690
21727
21750
21771
21787
21807
ISO
21847-1
Nuclear fuel technology ù Alpha spectrometry ù Part 1: Determination of neptunium in uranium and its compounds First Edition
ISO
21847-2
Nuclear fuel technology - Alpha spectrometry - Part 2: Determination of plutonium in uranium and its compounds First Edition
ISO
ISO
ISO
ISO
21847-3
21848
21849
21869
Nuclear fuel technology - Alpha spectrometry - Part 3: Determination of uranium 232 in uranium and its compounds First Edition
Road vehicles Electrical and electronic equipment for a supply voltage of 42 V Electrical loads First edition
Aircraft and space Industrial data Product identification and traceability First Edition; Replaces ISO TS 21849:2003
Rubber compounding ingredients Magnesium oxide Methods of test FIrst Edition
ISO
21870
ISO
21871
ISO
21888
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
21889
21898
21909
21927-2
21927-3
21948
21949
21950
Rubber compounding ingredients Carbon black Determination of high-temperature loss on heating by thermogravimetry First Edition
Microbiology of food and animal feeding stuffs Horizontal method for the determination of low numbers of presumptive Bacillus
cereus Most probable number technique and detection method First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Identification and Call Linkage Additional Network Feature First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Service Network Inter-Exchange Signalling Protocol - Call Identification and Call Linkage Additional Network Feature First Edition
Packaging Flexible intermediate bulk containers (FIBCs) for non-dangerous goods First Edition
Passive personal neutron dosemeters Performance and test requirements First edition
Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators First Edition
Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators First Edition
Coated Abrasives - Plain Sheets First Edition
Coated Abrasives - Plain Sheets with Holes for Dust Extraction First Edition
Coated Abrasives - Plain Discs First Edition
ISO
21951
Coated Abrasives - Plain Discs with Holes for Dust Extraction First Edition
ISO
21961
Space Data and Information Transfer Systems - Data Entity Dictionary Specification Language (DEDSL) - Abstract Sytax First Edition
ISO
21962
ISO
ISO
ISO
21968
21969
21988
ISO
21989
ISO
21990
ISO
21991
ISO
ISO
ISO
21992
21994
22000
ISO
22005
ISO
22028-1 CORR 1
ISO
ISO
ISO
22028-1
22029
22030
ISO
ISO
ISO
ISO
ISO
ISO
22032
22033
22034-1
22034-2
22037
22048
Space Data and Information Transfer Systems - Data Entity Dictionary Specification Language (DEDSL) - PVL Syntax First Edition
Non-magnetic metallic coatings on metallic and non-metallic basis materials Measurement of coating thickness Phase-sensitive
eddycurrent method First Edition
High-pressure flexible connections for use with medical gas systems First edition
Abrasion-resistant cast irons Classification First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Short Message Service First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Short Message Service First Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Corporate Telecommunication
Networks - Signalling Interworking Between QSIG and H.323 - Call Completion Supplementary Services First Edition
Information technology Telecommunications and information exchange between systems Private Integrated Services Network
Mapping functions for the tunnelling of QSIG through IP networks First Edition
Passenger cars ù Stopping distance at straight-line braking with ABS ù Openloop test method First Edition
Food safety management systems Requirements for any organization in the food chain First Edition
Traceability in the feed and food chain ù General principles and basic requirements for system design and implementation First
Edition
Photography and graphic technology ù Extended colour encodings for digital image storage, manipulation and interchange ù Part 1:
Architecture and requirements TECHNICAL CORRIGENDUM 1 First Edition
Photography and graphic technology Extended colour encodings for digital image storage, manipulation and interchange Part 1:
Architecture and requirements First Edition
Standard file format for spectral data exchange First Edition
Soil quality Biological methods Chronic toxicity in higher plants First Edition
Water quality Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge Method using extraction
and gas chromatography/mass spectrometry First Edition
Nickel alloys Determination of niobium Inductively coupled plasma atomic emmision spectrometric method First Edition
Steel wire and wire products ù Part 1: General test methods First Edition
Steel wire and wire products ù Part 2: Tolerances on wire dimensions First Edition
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials ù Dimensions First Edition
Surface chemical analysis Information format for static secondary-ion mass spectrometry First Edition
ISO
22050
Information Technology - Data Interchange on 12,7 mm, 384-Track Magnetic Tape Cartridges - Ultrium-1 Format First Edition
ISO
ISO
ISO
22051
22072
22088-1
ISO
22088-2
ISO
22088-3
ISO
22088-4
ISO
22088-5
ISO
ISO
ISO
22088-6
22090-1 CORR 1
22090-1
ISO
ISO
22090-2 CORR 1
22090-2
ISO
ISO
ISO
22090-3 CORR 1
22090-3
22091
ISO
22092
ISO
ISO
ISO
22093
22096
22112
ISO
ISO
ISO
22155
22156
22157-1
Information Technology - Data Interchange on 12,7 mm, 448-Track Magnetic Tape Cartridges - SDLT1 Format First Edition
Aerospace Electrohydrostatic actuator (EHA) Characteristics to be defined in procurement specifications First edition
Plastics Determination of resistance to environmental stress cracking (ESC) Part 1: General guidance First Edition
Plastics Determination of resistance to environmental stress cracking (ESC) Part 2: Constant tensile load method First Edition;:
1992 [Superseded: ISO 6252]
Plastics Determination of resistance to environmental stress cracking (ESC) Part 3: Bent strip method Plastiques DÚtermination de
la fissuration sous contrainte dans un environnement donnÚ (ESC) Partie 3: MÚthode de l'Úprouvette courbÚe First Edition;:1986
[Replaced: ISO 4599]
Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method Plastiques
DÚtermination de la fissuration sous contrainte dans un environnement donnÚ (ESC) Partie 4: MÚthode par enfoncement de billes
ou de goupilles First Edition;:1992 [Replaced: ISO 4600]
Plastics Determination of resistance to environmental stress cracking (ESC) Part 5: Constant tensile deformation method Plastiques
DÚtermination de la fissuration sous contrainte dans un environnement donnÚ (ESC) Partie 5: MÚthode de dÚformation en traction
constante First Edition
Plastics Determination of resistance to environmental stress cracking (ESC) Part 6: Slow strain rate method Plastiques
DÚtermination de la fissuration sous contrainte dans un environnement donnÚ (ESC) Partie 6: MÚthode Ó vitesse de dÚformation
lente First Edition
Ships and marine technology ù Transmitting heading devices (THDs) ù Part 1: Gyro-compasses First Edition
Ships and marine technology ù Transmitting heading devices (THDs) ù Part 1: Gyro-compasses First Edition
Ships and marine technology ù Transmitting heading devices (THDs) ù Part 2: Geomagnetic principles TECHNICAL
CORRIGENDUM 1 First Edition
Ships and marine technology ù Transmitting heading devices (THDs) ù Part 2: Geomagnetic principles First Edition
Ships and marine technology ù Transmitting heading devices (THDs) ù Part 3: GNSS principles TECHNICAL CORRIGENDUM 1
First Edition
Ships and marine technology ù Transmitting heading devices (THDs) ù Part 3: GNSS principles First Edition
Information Technology - Streaming Lossless Data Compression Algorithm (SLDC) First Edition
Information Technology - Data Interchange on 130 mm Magneto-Optical Disk Cartridges - Capacity: 9,1 Gbytes per Cartridge First
Edition
Industrial automation systems and integration Physical device control Dimensional Measuring Interface Standard (DMIS) First
Edition
Condition monitoring and diagnostics of machines ù Acoustic emission First edition
Dentistry Artificial teeth for dental prostheses First Edition; Replaces ISO 3336 and ISO 4824
Soil quality Gas chromatographic quantitative determination of volatile aromatic and halogenated hydrocarbons and selected ethers
Static headspace method First Edition
Bamboo Structural design First Edition
Bamboo Determination of physical and mechanical properties Part 1: Requirements First Edition
ISO
22159
ISO
ISO
22160
22168
ISO
ISO
22174
22188
ISO
ISO
ISO
ISO
22197-1
22198
22199
22200
ISO
22214
Personal equipment for protection against falls ù Descending devices First Edition
Milk and milk-based drinks ù Determination of alkaline phosphatase activity ù Enzymatic photo-activated system (EPAS) method First
Edition
Road vehicles Holding test of coatings influencing the colour of light emitted by light source(s) Test methods First Edition
Microbiology of food and animal feeding stuffs Polymerase chain reaction (PCR) for the detection of food-borne pathogens General
requirements and definitions First edition
Monitoring for inadvertent movement and illicit trafficking of radioactive material First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) ù Test method for air-purification performance of semiconducting
photocatalytic materials ù Part 1: Removal of nitric oxide First Edition
Textiles Fabrics Determination of width and length First Edition; Supersedes ISO 3932:1976 and ISO 3933:1976
Electromagnetic compatibility Product family standard for lifts, escalators and moving walks Emission First Edition
Electromagnetic compatibility Product family standard of lifts, escalators and moving walks Immunity First Edition
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) Test Method for Cyclic Bending Fatigue of Monolithic Ceramics
at Room Temperature First Edition
ISO
ISO
22215
22222
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for tensile creep of monolithic ceramics First Edition
Personal financial planning Requirements for personal financial planners First Edition
ISO
ISO
22234
22241-1
Cinematography Relative and absolute sound pressure levels for motion-picture multi-channel sound systems Measurement
methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio First Edition
Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements First Edition;:2005
ISO
ISO
ISO
ISO
22241-2
22242
22254
22264
Diesel engines NOx reduction agent AUS 32 Part 2: Test methods First Edition;:2005 [Replaced: BSI DD ISO/PAS 22241-2]
Road construction and road maintenance machinery and equipment Basic types Identification and description First Edition
Dentistry Manual toothbrushes Resistance of tufted portion to deflection First Edition; Supersedes ISO 8627:1987
Telemark ski-boots for adults Interface with Telemark ski-bindings Requirements and test methods First Edition
ISO
ISO
ISO
22288
22308
22309
ISO
ISO
22310
22314
ISO
22368-1
Leather Physical and mechanical tests Determination of flex resistance by the vamp flex method First Edition; IULTCS/IUP 39
Cork stoppers Sensory analysis First Edition
Microbeam analysis Quantitative analysis using energy-dispersive spectrometry (EDS) First Edition
Information and documentation Guidelines for standards drafters for stating records management requirements in standards First
Edition
Plastics Glass-fibre-reinforced products Determination of fibre length First Edition
Crop protection equipment Test methods for the evaluation of cleaning systems Part 1: Internal cleaning of complete sprayers First
Edition
ISO
22368-2
Crop protection equipment Test methods for the evaluation of cleaning systems Part 2: External cleaning of sprayers First Edition
ISO
ISO
ISO
22368-3
22369-1
22374
ISO
22391-1
ISO
22391-2
ISO
22391-3
ISO
ISO
ISO
ISO
ISO
22391-5
22414
22434
22435
22472
ISO
ISO
22475-1
22476-2
ISO
22478
ISO
22489
Crop protection equipment Test methods for the evaluation of cleaning systems Part 3: Internal cleaning of tank First Edition
Crop protection equipment Drift classification of spraying equipment Part 1: Classes First Edition
Dentistry Dental handpieces Electrical-powered scalers and scaler tips First Edition
Plastics piping systems for hot and cold water installations ù Polyethylene of raised temperature resistance (PE-RT) ù Part 1: General
First Edition
Plastics piping systems for hot and cold water installations ù Polyethylene of raised temperature resistance (PE-RT) ù Part 2: Pipes
First edition
Plastics piping systems for hot and cold water installations ù Polyethylene of raised temperature resistance (PE-RT) ù Part 3: Fittings
First edition
Plastics piping systems for hot and cold water installations ù Polyethylene of raised temperature resistance (PE-RT) ù Part 5: Fitness
for purpose of the system First edition
Paper Cut-size office paper Measurement of edge quality First Edition
Transportable gas cylinders Inspection and maintenance of cylinder valves First Edition
Gas cylinders ù Cylinder valves with integrated pressure regulators ù Specification and type testing First Edition
Ships and marine technology Guidelines for the operation and installation of voyage data recorders (VDR) First Edition
Geotechnical investigation and testing Sampling methods and groundwater measurements Part 1: Technical principles for execution
First Edition
Geotechnical investigation and testing Field testing Part 2: Dynamic probing First Edition
Water quality Determination of certain explosives and related compounds Method using high-performance liquid chromatography
(HPLC) with UV detection First Edition
Microbeam analysis Electron probe microanalysis Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray
spectroscopy First Edition
ISO
ISO
ISO
ISO
22498
22522
22523
22533
Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving First Edition
Crop protection equipment ù Field measurement of spray distribution in tree and bush crops First edition
External limb prostheses and external orthoses Requirements and test methods First Edition
Information technology Data interchange on 90 mm optical disk cartridges Capacity: 2,3 Gbytes per cartridge First Edition
ISO
22534
ISO
ISO
ISO
22535
22537
22538-1
Information technology Telecommunications and information exchange between systems Application session services First edition
Information technology Telecommunications and information exchange between systems Corporate Telecommunication Networks
Tunnelling of QSIG over SIP Second edition
Information technology ECMAScript for XML (E4X) specification First Edition
Space systems - Oxygen safety - Part 1: Design of oxygen systems and components First Edition
ISO
22538-2
Space systems ù Oxygen safety ù Part 2: Selection of metallic materials for oxygen systems and components First Edition
ISO
ISO
ISO
ISO
22538-3
22538-4
22554
22555
ISO
22608
ISO
22609
ISO
ISO
ISO
ISO
ISO
22610
22612
22628
22641
22642
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
22643
22644
22645
22646
22647
22649
22650
22651
22652
22653
22654
ISO
ISO
ISO
ISO
ISO
ISO
ISO
22662
22663
22664
22666
22667
22669
22670
Space systems ù Oxygen safety ù Part 3: Selection of non-metallic materials for oxygen systems and components First Edition
Space systems - Oxygen safety - Part 4: Hazards analyses for oxygen systems and components First Edition
Ships and marine technology ù Propeller shaft revolution indicators ù Electric type and electronic type First Edition
Ships and marine technology ù Propeller pitch indicators First Edition
Protective clothing Protection against liquid chemicals Measurement of repellency, retention, and penetration of liquid pesticide
formulations through protective clothing materials First Edition
Clothing for protection against infectious agents Medical face masks Test method for resistance against penetration by synthetic
blood (fixed volume, horizontally projected) First Edition
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment Test method to
determine the resistance to wet bacterial penetration First edition
Clothing for protection against infectious agents Test method for resistance to dry microbial penetration First edition
Road Vehicles - Recyclability and Recoverability - Calculation Method First Edition
Space data and information transfer systems - TM (telemetry) synchronization and channel coding First Edition
Space data and information transfer systems - TC (telecommand) synchronization and channel coding First Edition
Space Data and Information Transfer Systems - Data Entity Dictionary Specification Language (DEDSL) - XML/DTD Syntax First
Edition
Space data and information transfer systems Orbit data messages First Edition
Space data and information transfer systems - TM (telemetry) space data link protocol First Edition
Space data and information transfer systems Space packet protocol First Edition
Space data and information transfer systems Space link identifiers First Edition
Footwear Test methods for insoles and insocks Water absorption and desorption First Edition
Footwear - Test Methods for Whole Shoe - Heel Attached First Edition
Footwear - Test Methods for Insoles - Dimensional Stability First Edition
Footwear - Test Methods for Insoles, Lining and Insocks - Perspiration Resistance First Edition
Footwear Test methods for lining and insocks Static friction First Edition
Footwear - Test Methods for Outsoles - Tensile Strength and Elongation First Edition
Milk and milk products ù Determination of lactose content by high-performance liquid chromatography (Reference method) First
Edition
Space data and information transfer systems Proximity-1 space link protocol Data link layer First Edition
Space data and information transfer systems - TC (telecommand) space data link protocol First Edition
Space data and information transfer systems ù AOS (advanced orbiting systems) space data link protocol Second Edition
Space data and information transfer systems - Communication operations Procedure-1 First Edition
Space data and information transfer systems ù Space link extension (SLE) ù Return-all-frames service Second Edition
Space data and information transfer systems Space link extension (SLE) Return-channel-frames service First edition
Space data and information transfer systems ù Space link extension (SLE) ù Forward communications link transmission unit (CLTU)
service Second edition
Space data and information transfer systems Space link extension (SLE) Forward space packet service First Edition
Dentistry Metallic materials for fixed and removable restorations and appliances First Edition [Superseded: ISO 1562, ISO 1562, ISO
6871-1, ISO 6871-1, ISO 6871-2, ISO 6871-2, ISO 8891, ISO 8891, ISO 16744]
Prosthetics Testing of ankle-foot devices and foot units Requirements and test methods First Edition
Utility lighters General consumer-safety requirements First Edition
Cosmetics Packaging and labelling First Edition
Cosmetics Microbiology Detection of Pseudomonas aeruginosa First Edition
Cosmetics - Microbiology - Detection of Staphylococcus aureus First Edition
Conveyor belts ù Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining First
Edition
Packaging Linear bar code and twodimensional symbols for product packaging First Edition
ISO
ISO
22671
22672
ISO
ISO
ISO
ISO
ISO
ISO
22674
22675
22702
22715
22717
22718
ISO
ISO
22721
22742
ISO
ISO
ISO
ISO
22743 CORR 1
22743
22762-1 CORR 1
22762-1
ISO
ISO
22762-2 CORR 1
22762-2
ISO
ISO
ISO
ISO
ISO
ISO
22762-3 CORR 1
22762-3
22763
22768
22774
22775
ISO
22776
Footwear Test methods for accessories: Touch and close fasteners Shear strength before and after repeated closing First Edition
ISO
22777
Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing First Edition
ISO
ISO
22778
22779
Metallic coatings Physical vapour-deposited coatings of cadmium on iron and steel Specification and test methods First Edition
Metallic coatings Physical vapour-deposited coatings of aluminium Specification and test methods First Edition
Water quality ù Determination of sulfates ù Method by continuous flow analysis (CFA) ù TECHNICAL CORRIGENDUM 1 First Edition
Water quality Determination of sulfates Method by continuous flow analysis (CFA) First Edition
Elastomeric seismic-protection isolators ù Part 1: Test methods TECHNICAL CORRIGENDUM 1 First Edition
Elastomeric seismic-protection isolators ù Part 1: Test methods First Edition
Elastomeric seismic-protection isolators ù Part 2: Applications for bridges ù Specifications TECHNICAL CORRIGENDUM 1 First
Edition
Elastomeric seismic-protection isolators ù Part 2: Applications for bridges ù Specifications First Edition
Elastomeric seismic-protection isolators ù Part 3: Applications for buildings ù Specifications TECHNICAL CORRIGENDUM 1 First
Edition
Elastomeric seismic-protection isolators ù Part 3: Applications for buildings ù Specifications First Edition
Equipment for crop protection Sprayers Demonstration track for field crop sprayers First Edition
Rubber, raw Determination of the glass transition temperature by differential scanning calorimetry (DSC) First Edition
Footwear Test methods for accessories: shoe laces Abrasion resistance First Edition
Footwear Test methods for accessories: Metallic accessories Corrosion resistance First Edition
ISO
22794
ISO
22803
ISO
22825
ISO
22826
ISO
22827-1
ISO
22827-2
ISO
22829
ISO
ISO
ISO
22846-1
22857
22866
ISO
22867 CORR 1
ISO
22867
ISO
ISO
22868
22870
ISO
ISO
ISO
ISO
ISO
ISO
22877
22878
22879
22880
22881
22882
ISO
ISO
ISO
22883
22884
22891
Dentistry ù Implantable materials for bone filling and augmentation in oral and maxillofacial surgery ù Contents of a technical file First
Edition
Dentistry Membrane materials for guided tissue regeneration in oral and maxillofacial surgery Contents of a technical file First
Edition
Non-destructive testing of welds Ultrasonic testing Testing of welds in austenitic steels and nickel-based alloys First Edition
Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and
Knoop hardness tests) First Edition
Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly First Edition
Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 2: Moving mechanism First
Edition
Resistance welding ù Transformerrectifier for welding guns with integrated transformers ù Transformer-rectifier units operating at 1
000 Hz frequency First edition
Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work First
Edition
Health informatics Guidelines on data protection to facilitate trans-border flows of personal health information First Edition
Equipment for crop protection - Methods for field measurement of spray drift First Edition
Forestry machinery ù Vibration test code for portable hand-held machines with internal combustion engine ù Vibration at the handles
TECHNICAL CORRIGENDUM 1 First Edition
Forestry machinery ù Vibration test code for portable hand-held machines with internal combustion engine ù Vibration at the handles
First Edition [Replaced: ISO 7505, ISO 7916]
Forestry machinery Noise test code for portable hand-held machines with internal combustion engine Engineering method (Grade 2
accuracy) First Edition; Replaces ISO 7182: 1984; ISO 7917: 1987; ISO 9207: 1995; ISO 10884: 1995
Point-of-care testing (POCT) Requirements for quality and competence First Edition
Castors and wheels Vocabulary, symbols and multilingual terminology Roues et roulettes Vocabulaire, symboles et terminologie
multilingue First Edition
Castors and wheels Test methods and apparatus First Edition
Castors and wheels Requirements for castors for furniture First Edition
Castors and wheels Requirements for castors for swivel chairs First Edition
Castors and wheels Requirements for use on manually propelled equipment for institutional applications First Edition
Castors and wheels Requirements for castors for hospital beds First Edition
Castors and wheels Requirements for applications up to 1,1 m/s (4 km/h) First Edition; ISO 22883 Replaces ISO 2175:1981, ISO
2184-1:1972, ISO 3101:1981 and ISO 3102:1981
Castors and wheels Requirements for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h) First Edition
Paper ù Determination of transmittance by diffuse reflectance measurement First Edition
ISO
ISO
ISO
ISO
ISO
ISO
22892
22896
22897
22902-1
22902-2
22902-3
Soil quality Guidelines for the identification of target compounds by gas chromatography and mass spectrometry First Edition
Road vehicles Deployment and sensor bus for occupant safety systems First Edition
Glass in building Glazing and airborne sound insulation Product descriptions and determination of properties First Edition
Road vehicles Automotive multimedia interface Part 1: General technical overview First edition
Road vehicles Automotive multimedia interface Part 2: Use cases First Edition
Road vehicles Automotive multimedia interface Part 3: System requirements First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
22902-4
22902-5
22902-6
22902-7
22917
22958
22965-1
22965-2
22972
22977
22986
Road vehicles Automotive multimedia interface Part 4: Network protocol requirements for vehicle interface access First Edition
Road vehicles Automotive multimedia interface Part 5: Common message set First Edition
Road vehicles Automotive multimedia interface Part 6: Vehicle interface requirements First Edition
Road vehicles Automotive multimedia interface Part 7: Physical specification First Edition
Superabrasives Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride First Edition
Textiles Water resistance Rain tests: exposure to a horizontal water spray First Edition
Concrete ù Part 1: Methods of specifying and guidance for the specifier First Edition
Concrete ù Part 2: Specification of constituent materials, production of concrete and compliance of concrete First Edition
Essential oils Analysis by gas chromatography on chiral capillary columns General method First Edition
Road vehicles M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing First Edition
Cranes ù Stiffness ù Bridge and gantry cranes First Edition
ISO
22991
ISO
23000-2
ISO
ISO
ISO
ISO
23000-3
23001-1 CORR 2
23001-1 TECH
CORR
23001-1
ISO
23001-1 FDAM 1
ISO
ISO
ISO
ISO
23002-1
23003-1
23004-1
23004-3
Gas cylinders Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) Design and construction First Edition
Information technology Multimedia application format (MPEG-A) Part 2: MPEG music player application format First Edition
Information technology ù Multimedia application format (MPEG-A) ù Part 3: MPEG photo player application format First Edition
Information technology ù MPEG systems technologies ù Part 1: Binary MPEG format for XML First Edition
Information technology MPEG systems technologies Part 1: Binary MPEG format for XML First Edition
Information technology MPEG systems technologies Part 1: Binary MPEG format for XML First Edition
Information technology ù MPEG systems technologies ù Part 1: Binary MPEG format for XML AMENDMENT 1: Conformance and
reference software
Information technology MPEG video technologies Part 1: Accuracy requirements for implementation of integer-output 8Î8 inverse
discrete cosine transform First Edition
Information technology ù MPEG audio technologies ù Part 1: MPEG Surround First Edition
Information technology ù Multimedia Middleware ù Part 1: Architecture First Edition
Information technology ù Multimedia Middleware ù Part 3: Component model First Edition
ISO
23004-4
ISO
ISO
ISO
ISO
23026
23038
23058
23079
ISO
ISO
23145-1
23181
ISO
ISO
23202
23205
ISO
ISO
ISO
23206 CORR 1
23206
23208
ISO
23251 CORR 1
ISO
ISO
ISO
ISO
23251
23270
23271
23273-1
ISO
ISO
23273-2
23273-3
ISO
23274
ISO
23275-1
ISO
ISO
ISO
ISO
23275-2
23277
23278
23279
Information technology ù Multimedia Middleware ù Part 4: Resource and quality management First Edition
Software Engineering Recommended Practice for the Internet Web Site Engineering, Web Site Management, and Web Site Life
Cycle First Edition; IEEE Std 2001: 2002
Space systems Space solar cells Electron and proton irradiation test methods First Edition
Milk and milk products Ovine and caprine rennets Determination of total milk-clotting activity First Edition; IDF 199
Magnesium and magnesium alloys Returns Requirements, classification and acceptance First edition
Fine ceramics (advanced ceramics, advanced technical ceramics) ù Determination of bulk density of ceramic powders ù Part 1: Tap
density First Edition
Hydraulic fluid power ù Filter elements ù Determination of resistance to flow fatigue using high viscosity fluid First edition
Aluminium oxide used for the production of aluminium Determination of particles passing a 20 micrometre aperture sieve First
Edition
Agricultural tractors Instructional seat First Edition
Agricultural wheeled tractors and attachments ù Front loaders ù Carriages for attachments TECHNICAL CORRIGENDUM 1 First
edition
Agricultural wheeled tractors and attachments Front loaders Carriages for attachments First edition
Cryogenic vessels Cleanliness for cryogenic service First Edition
Petroleum, petrochemical and natural gas industries ù Pressure-relieving and depressuring systems TECHNICAL CORRIGENDUM 1
First Edition
Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems First Edition * Corrected Version
10/01/2006
Information Technology - C# Language Specification First Edition
Information technology Common Language Infrastructure (CLI) Partitions I to VI Second Edition
Fuel cell road vehicles Safety specifications Part 1: Vehicle functional safety First Edition
Fuel cell road vehicles Safety specifications Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed
hydrogen First Edition
Fuel cell road vehicles Safety specifications Part 3: Protection of persons against electric shock First Edition
Hybrid-electric road vehicles ù Exhaust emissions and fuel consumption measurements ù Non-externally chargeable vehicles First
Edition
Animal and vegetable fats and oils Cocoa butter equivalents in cocoa butter and plain chocolate Part 1: Determination of the
presence of cocoa butter equivalents First Edition
Animal and vegetable fats and oils Cocoa butter equivalents in cocoa butter and plain chocolate Part 2: Quantification of cocoa
butter equivalents First Edition
Non-destructive testing of welds Penetrant testing of welds Acceptance levels First Edition
Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels First Edition
Non-destructive testing of welds ù Ultrasonic testing ù Characterization of indications in welds First Edition
ISO
23289
ISO
ISO
ISO
23290
23309
23317
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
23328-1
23328-2
23360-1
23360-2
23360-3
23360-4
23360-5
23360-6
23360-7
23360-8
23391
23392
23393
23394
23429
23469
ISO
ISO
23470
23509
ISO
ISO
ISO
23529
23539
23550
ISO
23551-1
ISO
23551-2
ISO
23551-3
Information technology Telecommunications and information exchange between systems Corporate telecommunication networks
Signalling interworking between QSIG and H.323 Basic services First Edition
Information technology Telecommunications and information exchange between systems Private Integrated Services Network
Mapping functions for the tunnelling of QSIG through H.323 networks Second Edition
Hydraulic fluid power systems ù Assembled systems ù Methods of cleaning lines by flushing First Edition
Implants for surgery ù In vitro evaluation for apatite-forming ability of implant materials First edition
Breathing system filters for anaesthetic and respiratory use Part 1: Salt test method to assess filtration performance First Edition
Breathing System Filters for Anaesthetic and Respiratory Use - Part 2: Non-Filtration Aspects First Edition
Linux Standard Base (LSB) core specification 3.1 ù Part 1: Generic specification First Edition
Linux Standard Base (LSB) core specification 3.1 ù Part 2: Specification for IA32 architecture First Edition
Linux Standard Base (LSB) core specification 3.1 ù Part 3: Specification for IA64 architecture First Edition
Linux Standard Base (LSB) core specification 3.1 ù Part 4: Specification for AMD64 architecture First Edition
Linux Standard Base (LSB) core specification 3.1 ù Part 5: Specification for PPC32 architecture First Edition
Linux Standard Base (LSB) core specification 3.1 Part 6: Specification for PPC64 architecture First Edition
Linux Standard Base (LSB) core specification 3.1 Part 7: Specification for S390 architecture First Edition
Linux Standard Base (LSB) core specification 3.1 Part 8: Specification for S390X architecture First Edition
Dried rosehips Specification and test methods First Edition
Fresh and quick-frozen maize and peas Determination of alcohol-insoluble solids content First Edition
Pomegranate fruit Specification and test methods First Edition
Dried oleaster Specification and test methods First Edition
Gauging of hexagon sockets First Edition
Bases for design of structures Seismic actions for designing geotechnical works First Edition
Soil quality ù Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt
trichloride solution First Edition
Bevel and hypoid gear geometry First Edition
Rubber General procedures for preparing and conditioning test pieces for physical test methods First Edition; Replaces ISO
471:1995, ISO 3383:1985, ISO 4648:1991, ISO 4661-1:1993
Photometry - The CIE system of physical photometry First Edition; CIE S 010/E
Safety and control devices for gas burners and gas-burning appliances General requirements First Edition
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic valves First edition
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 2: Pressure regulators First
edition
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 3: Gas/air ratio controls,
pneumatic type First edition
ISO
23551-4
ISO
ISO
23553-1
23559
ISO
23570-1
ISO
23570-2
ISO
23570-3
ISO
ISO
23603
23611-1
ISO
ISO
23611-2
23611-3
ISO
ISO
23631
23651
ISO
ISO
23667
23671
ISO
ISO
ISO
ISO
23711
23713
23714
23717
ISO
ISO
23718
23733
ISO
23747
ISO
23753-1
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for
automatic shut-off valves First Edition
Safety and control devices for oil burners and oil-burning appliances ù Particular requirements ù Part 1: Shut-off devices for oil
burners First Edition
Plastics ù Film and sheeting ù Guidance on the testing of thermoplastic films First Edition
Industrial automation systems and integration Distributed installation in industrial applications Part 1: Sensors and actuators First
Edition
Industrial automation systems and integration Distributed installation in industrial applications Part 2: Hybrid communication bus
First Edition
Industrial automation systems and integration Distributed installation in industrial applications Part 3: Power distribution bus
Syst×mes d'automatisation industrielle et intÚgration Installation distribuÚe dans les applications industrielles Partie 3: Bus de
distribution d'Únergie First Edition
Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour First Edition;
CIE S 012/E
Soil quality Sampling of soil invertebrates Part 1: Hand-sorting and formalin extraction of earthworms First Edition
Soil quality Sampling of soil invertebrates Part 2: Sampling and extraction of micro-arthropods (Collembola and Acarina) First Edition
Soil quality ù Sampling of soil invertebrates ù Part 3: Sampling and soil extraction of enchytraeids First Edition
Water quality Determination of dalapon, trichloroacetic acid and selected haloacetic acids Method using gas chromatography (GCECD and/or GC-MS detection) after liquid-liquid extraction and derivatization First Edition
Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording AIT-3 format
Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing First
Edition
Passenger car tyres Method for measuring relative wet grip performance Loaded new tyres First Edition
Elastomeric seals Requirements for materials for pipe joint seals used in water and drainage applications Thermoplastic elastomers
First Edition
Pulps - Determination of fibre coarseness by automated optical analysis - Polarized light method First Edition
Pulps ù Determination of water retention value (WRV) First Edition
Steel wire and wire products Hose reinforcement wire First Edition
Metallic materials - mechanical testing - vocabulary MatÚriaux mÚtalliques ù Essais mÚcaniques ù Vocabulaire First Edition
[Superseded: ISO TR 12735-1]
Textiles ù Chenille yarns ù Test method for the determination of linear density First edition
Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously
breathing humans First Edition
Soil quality Determination of dehydrogenase activity in soils Part 1: Method using triphenyltetrazolium chloride (TTC) First Edition
ISO
ISO
ISO
ISO
23753-2
23794
23813
23815-1
ISO
ISO
ISO
23833
23853
23874
ISO
23912
ISO
23913
ISO
23915
ISO
23916
ISO
23917
ISO
23933
ISO
23935
ISO
23950
ISO
23953-1
ISO
23953-2
ISO
23988
ISO
ISO
24013
24014-1
Soil quality Determination of dehydrogenase activity in soils Part 2: Method using iodotetrazolium chloride (INT) First Edition
Rubber, vulcanized or thermoplastic Abrasion testing Guidance First Edition
Cranes ù Training of appointed persons First Edition
Cranes ù Maintenance ù Part 1: General First Edition
Microbeam analysis Electron probe microanalysis (EPMA) Vocabulary Analyse par microfaisceaux Analyse par microsonde
Úlectronique (microsonde de Castaing) Vocabulaire First Edition
Cranes Training of slingers and signallers First Edition
Natural gas Gas chromatographic requirements for hydrocarbon dewpoint calculation First Edition
Information technology 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD Recordable Disk (DVD-R) First
Edition
Water quality Determination of chromium(VI) Method using flow analysis (FIA and CFA) and spectrometric detection First Edition
Information technology Telecommunications and information exchange between systems Corporate Telecommunication Networks
Signalling Interworking between QSIG and SIP Call Diversion First Edition
Information technology Telecommunications and information exchange between systems Corporate Telecommunication Networks
Signalling Interworking between QSIG and SIP Call Transfer First Edition
Information technology Telecommunications and information exchange between systems NFCIP-1 Protocol Test Methods First
Edition
Aerospace Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 C/20 684 kPa (275
F/3 000 psi) and 135 C/21 000 kPa (275 F/3 046 psi) Procurement specification First Edition
Aircraft Environmental test procedures for airborne fluid system components Resistance to fire in designated fire zones First Edition
Information and Documentation - Information Retrieval (Z39.50) - Application Service Definition and Protocol Specification First
Edition
Refrigerated display cabinets Part 1: Vocabulary Meubles frigorifiques de vente Partie 1: Vocabulaire First Edition; Together with
ISO 23953-2, Replaces ISO 1992-1: 1974, ISO 1992-4: thru ISO 1992-6:1974, ISO 5160-1:1979 and ISO 5160-2:1980
Refrigerated display cabinets - Part 2: Classification, requirements and test conditions First Edition; Together with ISO 23953-1
Replaces ISO 1992-1: 1974, ISO 1992-4:1974 thru ISO 1992-6:1974, ISO 5160-1:1979 and ISO 5160-2:1980
Information technology ù A code of practice for the use of information technology (IT) in the delivery of assessments First edition
Optics and photonics Lasers and laser-related equipment Measurement of phase retardation of optical components for polarized
laser radiation First Edition
Public transport ù Interoperable fare management system ù Part 1: Architecture First Edition
ISO
ISO
ISO
ISO
ISO
24033
24034
24134
24135-1
24214
ISO
24234
ISO
ISO
ISO
24235
24236
24237
ISO
ISO
ISO
ISO
ISO
24276
24314
24334
24335
24336
ISO
ISO
24337
24338
ISO
ISO
ISO
24339
24340
24341
ISO
24342
ISO
ISO
ISO
24343-1
24345
24346
ISO
24347
ISO
24369
Pipes made of raised-temperatureresistance polyethylene (PE-RT) Effect of time and temperature on the expected strength First
Edition
Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification First Edition
Industrial trucks Additional requirements for automated functions on trucks First Edition
Industrial trucks Specifications and test methods for operator restraint systems Part 1: Lap-type seat belts First Edition
Skin barrier for ostomy aids Vocabulary First Edition
Dentistry Mercury and alloys for dental amalgam First Edition; Replaces ISO 1559:1995 and ISO 1560:1985 [Replaced: ISO 1560]
Fine ceramics (advanced ceramics, advanced technical ceramics) ù Determination of particle size distribution of ceramic powders by
laser diffraction method First edition
Surface chemical analysis Auger electron spectroscopy Repeatability and constancy of intensity scale First edition
Surface chemical analysis X-ray photoelectron spectroscopy Repeatability and constancy of intensity scale First edition
Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products General requirements and
definitions First Edition
Structural steels Structural steels for building with improved seismic resistance Technical delivery conditions First Edition
Laminate floor coverings Determination of locking strength for mechanically assembled panels First Edition
Laminate floor coverings Determination of impact resistance First Edition
Laminate floor coverings Determination of thickness swelling after partial immersion in water First edition
Laminate floor coverings Determination of geometrical characteristics RevÛtements de sol stratifiÚs DÚtermination des
caractÚristiques gÚomÚtriques First Edition
Laminate floor coverings Determination of abrasion resistance First Edition
Laminate and textile floor coverings Determination of dimensional variations after exposure to humid and dry climate conditions First
Edition
Resilient floor coverings Determination of thickness of layers First Edition
Resilient and textile floor coverings - Determination of length, width and straightness of sheet First Edition
Resilient and textile floor-coverings ù Determination of side length, edge straightness and squareness of tiles Second Edition
[Cancelled: ISO 13747]
Resilient and laminate floor coverings ù Determination of indentation and residual indentation ù Part 1: Residual indentation First
Edition
Resilient floor coverings Determination of peel resistance First Edition
Resilient floor coverings Determination of overall thickness First Edition
Agricultural vehicles Mechanical connections between towed and towing vehicles Dimensions of ball-type coupling device (80 mm)
First Edition
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of content of coarse particles in ceramic powders
by wet sieving method First Edition
ISO
24370
ISO
ISO
24408
24410
ISO
ISO
ISO
24431
24450
24490
ISO
24531
ISO
ISO
24535
24537
ISO
ISO
ISO
ISO
ISO
ISO
ISO
24570
24610-1
24700
24702
24703
24707
FDIS 24707
ISO
24709-1
ISO
24709-2
ISO
ISO
24711
24712
ISO
24723
ISO
ISO
24724
24727-1
ISO
24728
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for fracture toughness of monolithic ceramics at
room temperature by chevron-notched beam (CNB) method First edition
Ships and marine technology Position-indicating lights for life-saving appliances Testing, inspection and marking of production units
First Edition
Earth-moving machinery Coupling of attachments to skid steer loaders First edition
Gas cylinders Cylinders for compressed and liquefied gases (excluding acetylene) Inspection at time of filling First Edition;
Supersedes ISO 10463:1993 and ISO 11113:1995,
Laboratory glassware Wide-necked boiling flasks First Edition
Cryogenic vessels Pumps for cryogenic service First edition
Intelligent transport systems - System architecture, taxonomy and terminology - Using XML in ITS standards, data registries and data
dictionaries
Intelligent transport systems ù Automatic vehicle identification ù Basic electronic registration identification (Basic ERI) First Edition
Micrographics ù Dimensions for reels used for 16 mm and 35 mm microfilm First Edition
Software engineering NESMA functional size measurement method version 2.1 Definitions and counting guidelines for the
application of Function Point Analysis First Edition
Language resource management Feature structures Part 1: Feature structure representation First Edition
Quality and performance of office equipment that contains reused components First Edition
Information technology û Generic cabling û Industrial premises First Edition
Information technology Participant identifiers First Edition
Information technology - Common Logic (CL): a framework for a family of logic-based languages First Edition
Information technology - Common Logic (CL): a framework for a family of logic-based languages
Information technology ù Conformance testing for the biometric application programming interface (BioAPI) ù Part 1: Methods and
procedures first Edition
Information technology ù Conformance testing for the biometric application programming interface (BioAPI) ù Part 2: Test assertions
for biometric service providers First Edition
Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components
First Edition
Colour test pages for measurement of office equipment consumable yield First Edition
Information technology Automatic identification and data capture techniques EAN.UCC Composite bar code symbology specification
First Edition
Information technology - Automatic identification and data capture techniques - Reduced Space Symbology (RSS) bar code
symbology specification First Edition
Identification cards ù Integrated circuit card programming interfaces ù Part 1: Architecture First edition
Information technology Automatic identification and data capture techniques MicroPDF417 bar code symbology specification First
Edition
ISO
ISO
ISO
ISO
ISO
24730-1
24730-2
24738
24744
24775
ISO
24801-2
ISO
24801-3
Information technology Real-time locating systems (RTLS) Part 1: Application program interface (API) First Edition
Information technology Real-time locating systems (RTLS) Part 2: 2,4 GHz air interface protocol First Edition
Information technology Icon symbols and functions for multimedia link attributes First Edition
Software Engineering ù Metamodel for Development Methodologies First Edition
Information technology - Storage management First Edition
Recreational diving services ù Safety related minimum requirements for the training of recreational scuba divers ù Part 2: Level 2 ù
Autonomous diver First Edition
Recreational diving services ù Safety related minimum requirements for the training of recreational scuba divers ù Part 3: Level 3 ù
Dive leader First Edition
ISO
24802-1
Recreational diving services ù Safety related minimum requirements for the training of scuba instructors ù Part 1: Level 1 First Edition
ISO
ISO
ISO
ISO
ISO
24802-2
24803
24824-1
24824-2
25000
Recreational diving services ù Safety related minimum requirements for the training of scuba instructors ù Part 2: Level 2 First Edition
Recreational diving services ù Requirements for recreational scuba diving service providers First Edition
Information technology ù Generic applications of ASN.1: Fast Infoset First Edition
Information technology Generic applications of ASN.1: Fast Web Services First Edition
Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Guide to SQuaRE First Edition
ISO
25001
ISO
25020
Software engineering ù Software product Quality Requirements and Evaluation (SQuaRE) ù Planning and management First Edition
Software engineering ù Software product Quality Requirements and Evaluation (SQuaRE) ù Measurement reference model and
guide First Edition
ISO
25030
ISO
25051 CORR 1
ISO
25051
ISO
25062
ISO
ISO
ISO
25434
25435
25436
ISO
25437
Software engineering ù Software product Quality Requirements and Evaluation (SQuaRE) ù Quality requirements First Edition
Software engineering ù Software product Quality Requirements and Evaluation (SQuaRE) ù Requirements for quality of Commercial
Off-The-Shelf (COTS) software product and instructions for testing TECHNICAL CORRIGENDUM 1 First Edition
Software engineering Software product Quality Requirements and Evaluation (SQuaRE) Requirements for quality of Commercial OffThe-Self (COTS) software product and instructions for testing First Edition
Software engineering Software product Quality Requirements and Evaluation (SQuaRE) Common Industry Format (CIF) for usability
test reports First Edition
Information technology ù Data interchange on 120 mm and 80 mm optical disk using +R DL format ù Capacity: 8,55 Gbytes and 2,66
Gbytes per side (recording speed up to 8x) Second Edition
Data Interchange on 60 mm Read-Only ODC Capacity: 1,8 Gbytes (UMDTM) First Edition
Information technology Eiffel: Analysis, Design and Programming Language First Edition
Information technology Telecommunications and information exchange between systems WS-Session Web Services for
Application Session Services First Edition
ISO
ISO
ISO
ISO
ISO
ISO
25539-1 AMD 1
25539-1
26202
26300
26702
26908
Cardiovascular implants ù Endovascular devices ù Part 1: Endovascular prostheses AMENDMENT 1: Test methods First Edition
Cardiovascular Implants - Endovascular Devices - Part 1: Endovascular Prostheses First Edition
Magnesium and magnesium alloys - Magnesium alloys for cast anodes First Edition
Information technology Open Document Format for Office Applications (OpenDocument) v1.0 First Edition
Systems engineering - Application and management of the systems engineering process First Edition
Information technology ù MAC-PHY Interface for ISO/IEC 26907 First Edition
ISO
26143
ISO
ISO
ISO
26925
27001
27002
ISO
ISO
27006
28000
ISO
ISO
28003
28077
Space data and information transfer systems ù Space link extension (SLE) ù Return operational control fields service First Edition
Information technology Digital storage media for information interchange Data Interchange on 120 mm and 80 mm Optical Disk
using +RW HS Format Capacity: 4,7 and 1,46 Gbytes per Side (Recording speed 8X) First Edition
Information technology - Security techniques - Information security management systems - Requirements First Edition
Information technology ù Security techniques ù Code of practice for information security management First Edition
Information technology ù Security techniques ù Requirements for bodies providing audit and certification of information security
management systems First Edition
Specification for security management systems for the supply chain First Edition [Cancelled: ISO PAS 28000]
Security management systems for the supply chain - Requirements for bodies providing audit and certification of supply chain
security management systems First Edition [Cancelled: ISO PAS 28003]
Photocarcinogenesis action spectrum (non-melanoma skin cancers) First Edition; CIE S 019/E
ISO
28360
ISO
28361
ISO
42010
ISO
61340-4-4
ISO
ISO
ISO
80000-3
80000-4
80000-5
ISO
80000-8
Quantities and units Part 3: Space and time First Edition; Replaces ISO 31-1:1992 and ISO 31-2:1992 [Replaced: ISO 31-2]
Quantities and units Part 4: Mechanics First edition;:1992 [Replaced: ISO 31-3]
Quantities and units ù Part 5: Thermodynamics First edition [Superseded: ISO 31-4]
Quantities and units ù Part 8: Acoustics ***SDO SENDING CORRECTED PDF*** UNAVAILABLE UNTIL THEN *** First Edition
[Replaced: ISO 31-7]
ISO
80416-2
Basic Principles for Graphical Symbols for Use on Equipment - Part 2: Form and Use of Arrows First Edition; Replaces ISO 4196
Information technology ù Office equipment ù Determination of chemical emission rates from electronic equipment First Edition
Information technology ù Telecommunications and information exchange between systems ù Near Field Communication Wired
Interface (NFC-WI) First Edition
Systems and software engineering ù Recommended practice for architectural description of software-intensive systems First Edition
Electrostatics û Part 4-4: Standard test methods for specific applications û Electrostatic classification of flexible intermediate bulk
containers (FIBC) Electrostatique û Partie 4-4: MÚthodes d'essai normalisÚes pour des applications spÚcifiques û Classification
Úlectrostatique des grands rÚcipients pour vrac souples (GRVS) First Edition
ISO
ISO
ISO
80416-4
81400-4 CORR 1
81400-4
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
81714-1
82045-5
90003
CIE 10527
DGUIDE 76
DGUIDE 77-1
DGUIDE 77-2
DGUIDE 77-3
DGUIDE 78
DGUIDE 98-1
ISO
DGUIDE 99999.2
ISO
ISO
ISO
ISO
ISO
DIS 6983-1
DIS 7501-1
7501-1
DIS 8573-2
DIS 10218
ISO
DIS 10303-28
ISO
DIS 10303-59
ISO
DIS 10303-219
ISO
DIS 10303-223
ISO
ISO
ISO
ISO
DIS 10303-240
DIS 10414-2
DIS 10416
DIS 10779
Basic principles for graphical symbols for use on equipment - Part 4: Guidelines for the adaptation of graphical symbols for use on
screens and displays (icons) First Edition
Wind turbines ù Part 4: Design and specification of gearboxes TECHNICAL CORRIGENDUM 1 First Edition
Wind turbines ù Part 4: Design and specification of gearboxes First Edition
Design of Graphical Symbols for Use in the Technical Documentation of Products - Part 1: Basic Rules First Edition; Replaces
ISO/IEC 11714-1: 1996
Document management - Part 5: Application of metadata for the construction and facility management sector First Edition
Software engineering Guidelines for the application of ISO 9001:2000 to computer software First Edition;
CIE Standard Colorimetric Observers First Edition
Development of service standards ù Recommendations for addressing consumer issues
Guide for specification of product properties and classes Part 1: Fundamental benefits
Guide for specification of product properties and classes Part 2: Technical principles and guidance
Guide for specification of product properties and classes Part 3: Case studies
Safety of machinery Rules for drafting and presentation of safety standards
Uncertainty of measurement - Part 1: Introduction to the expression of uncertainty in measurement
International vocabulary of basic and general terms in metrology (VIM) Vocabulaire international des termes fondamentaux et
gÚnÚraux de mÚtrologie (VIM) Third Edition
Industrial automation systems and integration Numerical control of machines Program format and definitions of address words Part
1: Data format for positioning, line motion and contouring control systems
Identification cards ù Machine readable travel documents ù Part 1: Machine readable passport
Identification Cards - Machine Readable Travel Documents - Part 1: Machine Readable Passport Fourth Edition
Compressed air - Part 2: Test methods for aerosol oil content First Edition
Robots for industrial environments Safety requirements
Industrial automation systems and integration Product data representation and exchange Part 28: Implementation methods: XML
representations of EXPRESS schemas and data
Industrial automation systems and integration ù Product data representation and exchange ù Part 59: Integrated generic resource ù
Quality of product shape data
Industrial automation system Product data representation and exchange Part 219: Dimensional inspection information exchange
Industrial automation systems and integration ù Product data representation and exchange ù Part 223: Application protocol:
Exchange of design and manufacturing product information for cast parts
Industrial automation systems and integration Product data representation and exchange Part 240: Application protocol: Process
plans for machined products 2003
Petroleum and natural gas industries Field testing of drilling fluids Part 2: Oil-based fluids
Petroleum and natural gas industries Drilling fluids Laboratory testing
Office equipment accessibility guidelines for elderly persons and persons with disabilities
ISO
ISO
ISO
ISO
DIS 10995
DIS 11002
DIS 12500-3
DIS 13623
ISO
ISO
DIS 13624-1
DIS 13628-5
ISO
DIS 14649-12
ISO
DIS 17078-3
ISO
17343
ISO
DIS 17343
ISO
ISO
ISO
DIS 17344
DIS 19504
DIS 19901-3
ISO
ISO
ISO
DIS 19901-7
DIS 20815
DIS 20886
ISO
DIS 21809-3
ISO
ISO
ISO
ISO
DIS 21992
DIS 23025
DIS 23360
DIS 23874
ISO
DIS 23936-1
ISO
ISO
ISO
DIS 25457
DIS 25961
DIS 26907
Information technology ù Test method for the estimation of the archival lifetime of optical media
Information Technology ù SNIA Multipath Management API Specification
Filters for compressed air ù Test methods ù Part 3: Particulates
Petroleum and natural gas industries ù Pipeline transportation systems
Petroleum and natural gas industries ù Drilling and production equipment ù Part 1: Design and operation of marine drilling riser
equipment
Petroleum and natural gas industries ù Design and operation of subsea production systems ù Part 5: Subsea umbilicals
Industrial Automation Systems and Integration - Physical Device Control - Data Model for Computerized Numerical Controllers - Part
12: Process Data for Turning
Petroleum and natural gas industries ù Drilling and production equipment ù Part 3: Running, pulling and kick-over tools, and latches
for side-pocket mandrels
Information technology Telecommunications and nformation exchange between systems Corporate telecommunication networks
Signalling interworking between QSIG and SIP Basic services First Edition
Information technology ù Corporate telecommunication networks ù Signalling interworking between QSIG and SIP ù Basic services
Information technology Data interchange on 120 mm and 80 mm optical disk using +R format Capacity: 4,7 and 1,46 Gbytes per
side (recording speed up to 8X)
Information technology ù Open distributed processing ù Common Warehouse Metamodel Specification Version 1.1
Petroleum and natural gas industries ù Specific requirements for offshore structures ù Part 3: Topsides structure
Petroleum and natural gas industries Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating
offshore structures and mobile offshore units
Petroleum, petrochemical and natural gas industries Production assurance and reliability management
Information technology International Security, Trust, and Privacy Alliance Privacy Framework
Petroleum and natural gas industries ù External coatings for buried and submerged pipelines used in pipeline transportation systems
ù Part 3: Field joint coatings
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network
(PISN) - Mapping Functions for the Tunnelling of QSIG Through IP Networks
Common Industry Format for Usability Test Reports
Linux Standard Base Core Specification 2.0.1 Bib only
Natural gas Gas chromatographic requirements for hydrocarbon dewpoint calculation
Petroleum, petrochemical and natural gas industries ù Nonmetallic materials in contact with media related to oil and gas production ù
Part 1: Thermoplastics
Petroleum, petrochemical and natural gas industries ù Flare details for general refinery and petrochemical service [Superseded By:
DS DSF/PREN ISO 25457]
Recommended Practice for Architectural Description of Software-Intensive Systems
High Rate Ultra Wideband PHY and MAC Standard
ISO
DIS 26926
ISO
ISO
ISO
ISO
ISO
DIS 28359
DIS 29361
DIS 29362
DIS 29363
DIS 29382
ISO
ISO
ISO
ISO
ISO
DIS 29642
DIS 29881
FDIS 7811-8
7812-2
FDIS 7816-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
7816-2
FDIS 9594-1
FDIS 9594-2
FDIS 9594-3
FDIS 9594-4
FDIS 9594-5
FDIS 9594-6
FDIS 9594-7
FDIS 9594-8
FDIS 9594-9
ISO
FDIS 9594-10
ISO
ISO
FDIS 9973
FDIS 10414-1.2
ISO
10438-2
ISO
FDIS 10438-2
C++/CLI Language Specification
Information technology Data interchange on 120 mm and 80 mm Optical Disk using +R DL Format Capacity: 8,55 and 2,66 Gbytes
per Side (Recording speed up to 8x)
Information technology Basic Profile Version 1.1
Information technology Attachments Profile Version 1.0
Information technology Simple SOAP Binding Profile Version 1.0
Corporate Governance of Information and Communication Technology
Information technology ù Data interchange on 120 mm and 80 mm optical disk using +RW DL format ù Capacity: 8,55 Gbytes and
2,66 Gbytes per side (recording speed 2,4x)
Information technology ù Software and systems engineering ù FiSMA 1.1 functional size measurement method
Identification cards Recording technique Part 8: Magnetic stripe Coercivity of 51,7 kA/m (650 Oe)
Identification cards ù Identification of issuers ù Part 2: Application and registration procedures Third Edition
Identification cards ù Integrated circuit cards ù Part 2: Cards with contacts ù Dimensions and location of the contacts
Information Technology - Identification Cards - Integrated Circuit(s) Cards with Contacts - Part 2: Dimensions and Location of the
Contacts First Edition; Amendment 1: 06/01/2004
Information technology - Open Systems Interconnection - The Directory: Overview of concepts, models and services
Information technology Open Systems Interconnection The Directory: Models
Information technology Open Systems Interconnection The Directory: Abstract service definition
Information technology Open Systems Interconnection The Directory: Procedures for distributed operation
Information technology Open Systems Interconnection The Directory: Protocol specifications
Information technology Open Systems Interconnection The Directory: Selected attribute types
Information technology Open Systems Interconnection The Directory: Selected object classes
Information technology Open Systems Interconnection The Directory: Public-key and attribute certificate frameworks
Information technology Open Systems Interconnection The Directory: Replication
Information technology Open Systems Interconnection The Directory: Use of systems management for administration of the
Directory
Information technology Computer graphics, image processing and environmental data representation Procedures for registration of
items
Petroleum and natural gas industries ù Field testing of drilling fluids ù Part 1: Water-based fluids
Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 2: Specialpurpose oil systems First Edition
Petroleum, petrochemical and natural gas industries ù Lubrication, shaft-sealing and control-oil systems and auxiliaries ù Part 2:
Special-purpose oil systems
ISO
FDIS 10440-1
Petroleum, petrochemical and natural gas industries ù Rotary-type positivedisplacement compressors ù Part 1: Process compressors
ISO
10440-1
ISO
ISO
ISO
ISO
FDIS 11694-5
FDIS 14165-251
FDIS 14165-321
FDIS 14165-331
ISO
FDIS 14543-3-1
ISO
ISO
ISO
FDIS 14649-111
FDIS 14776-121
FDIS 14776-322
ISO
ISO
ISO
ISO
ISO
15417
FDIS 15444-10
FDIS 15444-13
FDIS 15459-5
FDIS 15897
ISO
FDIS 15944-4
ISO
FDIS 15944-5
ISO
16388
ISO
16390
ISO
ISO
FDIS 17078-2
FDIS 17613-1
ISO
FDIS 18000-7
ISO
ISO
ISO
18019
FDIS 19439
FDIS 19440
Petroleum and Natural Gas Industries - Rotary-Type Positive-Displacement Compressors - Part 1: Process Compressors (Oil-Free)
First Edition
Identification cards - Optical memory cards Part 5: Data format for information interchange for applications using ISO/IEC 11694-4,
Annex B
Information technology Fibre Channel Part 251: Framing and Signaling (FC-FS)
Information technology Fibre Channel Part 321: Audio-Video (FC-AV)
Information technology Fibre Channel Part 331: Virtual Interface (FC-VI)
Information technology Home Electronic Systems (HES) Architecture Part 3-1: Communication layers Application layer for network
based control of HES Class 1
Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 111:
Tools for milling machines
Information technology ù Small Computer System Interface (SCSI ù Part 121: Passive Interconnect Performance (PIP)
Information technology Small Computer System Interface [SCSI] Part 322: SCSI Block Commands - 2 [SBC-2]
Information technology - Automatic identification and data capture techniques - Code 128 bar code symbology specification - Second
Edition
Information technology ù JPEG 2000 image coding system: Extensions for three-dimensional data
Information technology ù JPEG 2000 image coding system: An entry level JPEG 2000 encoder
Information technology ù Unique identifiers ù Part 5: Unique identifier for returnable transport items (RTIs)
Information technology - Procedures for registration of cultural elements
Information technology ù Business Operational View ù Part 4: Business transaction scenarios ù Accounting and economic ontology
Information technology ù Business Operational View Part 5: Identification and referencing of requirements of jurisdictional domains
as sources of external constraints
Information technology ù Automatic identification and data capture techniques ù Code 39 bar code symbology specification Second
Edition
Information technology ù Automatic identification and data capture techniques ù Interleaved 2 of 5 bar code symbology specification
Second Edition
Petroleum and natural gas industries ù Drilling and production equipment ù Part 2: Flow-control devices for side-pocket mandrels
Manually operated pumps for drinking water Guidelines for selection and acceptance Part 1: Southeast Asia
Information technology Radio frequency identification for item management Part 7: Parameters for active air interface
communications at 433 MHz
Software and system engineering Guidelines for the design and preparation of user documentation for application software First
Edition
Enterprise integration Framework for enterprise modelling
Enterprise integration ù Constructs for enterprise modelling
ISO
FDIS 19785-1.2
ISO
ISO
ISO
FDIS 19785-2.2
FDIS 19785-3
FDIS 19795-1
ISO
ISO
ISO
ISO
ISO
ISO
FDIS 19796-1
FDIS 19902
FDIS 21000-2
FDIS 21000-14
FDIS 21630
FDIS 21771
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
FDIS 21809-2
21827
FDIS 21827
FDIS 23002-3
FDIS 23004-2
FDIS 23004-4
FDIS 23874
FDIS 24738
ISO
FDIS 24739-1
ISO
ISO
ISO
FDIS 24751-1
FDIS 24755
FDIS 62264-2
ISO
ISO
ISO
ISO
GUIDE 2
GUIDE 7
GUIDE 14
GUIDE 15
ISO
GUIDE 21-1
Information technology Common Biometric Exchange Formats Framework Part 1: Data element specification
Information technology Common Biometric Exchange Formats Framework Part 2: Procedures for the operation of the Biometric
Registration Authority
Information technology ù Common Biometric Exchange Formats Framework ù Part 3: Patron format specifications
Information technology Biometric performance testing and reporting Part 1: Principles and framework
Information technology Learning, education and training Quality management, assurance and metrics Part 1: General approach
Petroleum and Natural Gas Industries - Fixed steel offshore structures
Information technology - Multimedia framework (MPEG-21) - Part 2: Digital Item Declaration
Information technology ù Multimedia framework (MPEG-21) ù Part 14: Conformance Testing
Pumps - Testing - Submersible mixers for wastewater and similar applications
Gears ù Cylindrical involute gears and gear pairs ù Concepts and geometry
Petroleum and natural gas industries ù External coatings for buried or submerged pipelines used in pipeline transportation systems ù
Part 2: Fusion-bonded epoxy coatings
Information Technology - Systems Security Engineering - Capability Maturity Model (SSE-CMM) First Edition
Information technology ù Security techniques ù Systems Security Engineering ù Capability Maturity Model« (SSE-CMM«)
Information technology - MPEG video technologies - Part 3: Representation of auxiliary video and supplemental information
Information technology ù Multimedia Middleware ù Part 2: Multimedia application programming interface
Information technology ù Multimedia Middleware ù Part 4: Resource and quality management
Natural gas Gas chromatographic requirements for hydrocarbon dewpoint calculation
Information technology Icon symbols and functions for multimedia link attributes First Edition
Information technology ù AT Attachment with Packet Interface - 7 ù Part 1: Register Delivered Command Set, Logical Register Set
(ATA/ATAPI-7 V1)
Information technology Individualized adaptability and accessibility in e-learning, education and training Part 1: Framework and
reference model Technologies de l'information AdaptabilitÚ et accessibilitÚ individualisÚes en e-apprentissage, en Úducation et en
formation Partie 1: Cadre et mod×le de rÚfÚrence
Information technology ù Screen icons and symbols for personal mobile communication devices
Enterprise-control system integration Part 2: Model object attributes
Standardization and Related Activities - General Vocabulary Normalisation et Activites Connexes - Vocabulaire General Eighth
Edition
Guidelines for Drafting of Standards Suitable for Use for Conformity Assessment Second Edition; SAA/SNZ HB18.7: 1994
Purchase information on goods and services intended for consumers Second Edition
ISO/IEC Code of Principles onReference to Standards" First Edition"
Regional or national adoption of International Standards and other International Deliverables Part 1: Adoption of International
Standards First edition; ISO/IEC Guide 21-1, Together with ISO/IEC Guide 21-2 replaces ISO/IEC Guide 21:1999
ISO
GUIDE 21-2
ISO
GUIDE 23
ISO
ISO
ISO
ISO
ISO
ISO
GUIDE 27
GUIDE 28
GUIDE 30
GUIDE 31
GUIDE 32
GUIDE 33
ISO
ISO
ISO
ISO
GUIDE 34
GUIDE 35
GUIDE 37
GUIDE 41
ISO
GUIDE 43-1
ISO
ISO
ISO
ISO
ISO
GUIDE 43-2
GUIDE 46
GUIDE 47
GUIDE 50
GUIDE 51
ISO
ISO
ISO
ISO
ISO
GUIDE 53
GUIDE 59
GUIDE 60
GUIDE 63
GUIDE 64
ISO
ISO
ISO
ISO
GUIDE 65
GUIDE 67
GUIDE 68
GUIDE 69
Regional or national adoption of International Standards and other International Deliverables Part 2: Adoption of International
Deliverables other than International Standards First Edition; Together with ISO/IEC Guide 21-1 replaces ISO/IEC Guide 21:1999
Methods of Indicating Conformity with Standards for Third-Party Certification Systems First Edition; SANZ/SAA HB18.23: 1991
Guidelines for Corrective Action to Be Taken by a Certification Body in the Event of Misuse of Its Mark of Conformity First Edition;
Corrected and Reprinted - 1983; SANZ/SAA HB18.27: 1991
Conformity assessment Guidance on a third-party certification system for products Second Edition
Terms and Definitions Used in Connection with Reference Materials Second Edition
Reference Materials - Contents of Certificates and Labels Second Edition
Calibration in Analytical Chemistry and Use of Certified Reference Materials First Edition
Uses of Certified Reference Materials Second Edition
General Requirements for the Competence of Reference Material Producers Second Edition; TECHNICAL CORRIGENDUM 1: 11-152003
Reference materials - General and statistical principles for certification Third Edition
Instructions for Use of Products of Consumer Interest Second Edition
Packaging Recommendations for addressing consumer needs First Edition
Proficiency Testing by Interlaboratory Comparisions - Part 1: Development and Operation of Laboratory Proficiency Testing Schemes
Second Edition
Proficiency Testing by Interlaboratory Comparisions - Part 2: Selection and Use of Proficiency Testing Schemes by laboratory
Accreditation Bodies First Edition
Comparative Testing of Consumer Products and Related Services - General Principles First Edition
Presentation of Translations of ISO Publications First Edition
Safety Aspects - Guidelines for Child Safety Second Edition
Safety Aspects - Guidelines for Their Inclusion in Standards Second Edition
Conformity assessment Guidance on the use of an organization s quality management system in product certification Second dition
Code of Good Practice for Standardization First Edition
Conformity assessment Code of good practice Second Edition
Guide to the Development and Inclusion of Safety Aspects in International Standards for Medical Devices First Edition
Guide for the Inclusion of Environmental Aspects in Product Standards First Edition
General Requirements for Bodies Operating Product Certification Systems First Edition; Cancels and Replaces ISO/IEC Guide 40:
1983
Conformity assessment Fundamentals of product certification First Edition
Arrangements for the Recognition and Acceptance of Conformity Assessment Results First Edition
Harmonized Stage Code System (Edition 2) - Principles and Guidelines for Use First Edition
ISO
ISO
GUIDE 71
GUIDE 72
Guidelines for Standards Developers to Address the Needs of Older Persons and Persons with Disabilities First Edition
Guidelines for the Justification and Development of Management System Standards First Edition
Risk Management - Vocabulary - Guidelines for Use in Standards Management du Risque - Vocabulair - Principes Directeurs Pour
L'Utilisation dans Les Normes First Edition
Graphical symbols Technical guidelines for the consideration of consumers needs First Edition
Strategic principles for future IEC and ISO standardization in industrial automation First Edition
Health informatics HL7 version 3 Reference information model Release 1 First Edition
ISO
ISO
ISO
ISO
GUIDE 73
GUIDE 74
GUIDE 75
HL7 21731
ISO
ISO 4427-1
ISO
ISO 5398-4
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO 22536
ISO/ASTM 51204
ISO/ASTM 51205
ISO/ASTM 51261
ISO/ASTM 51275
ISO/ASTM 51276
ISO/ASTM 51310
ISO/ASTM 51400
ISO/ASTM 51401
ISO/ASTM 51431
ISO/ASTM 51538
ISO/ASTM 51539
ISO/ASTM 51540
ISO/ASTM 51607
ISO/ASTM 51608
ISO
ISO/ASTM 51631
Plastics piping systems ù Polyethylene (PE) pipes and fittings for water supply ù Part 1: General First Edition [Replaced: ISO 4427]
Leather ù Chemical determination of chromic oxide content ù Part 4: Quantification by inductively coupled plasma û optical emission
spectrometer (ICP-OES) First Edition
Information technology Telecommunications and information exchange between systems Near Field Communication Interface and
Protocol (NFCIP-1) RF interface test methods First Edition
Practice for dosimetry in gamma irradiation facilities for food processing Second Edition
Practice for Use of Ceric-Cerous Sulfate Dosimetry System First Edition
Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing First Edition
Practice for use of a radiochromic film dosimetry system Second Edition
Practice for use of a polymethylmethacrylate dosimetry system Second Edition
Practice for use of a radiochromic optical waveguide dosimetry system Second Edition
Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory Second Edition
Practice for Use of a Dichromate Dosimetry System Second Edition
Practice for dosimetry in electron beam and X-ray (bremsstrahlung) irradiation facilities for food processing Second Edition
Practice for Use of the Ethanol-Chlorobenzene Dosimetry System First Edition
Guide for use of radiation-sensitive indicators Second Edition
Practice for use of a radiochromic liquid dosimetry system Second Edition
Practice for use of an alanine-EPR dosimetry system Second Edition
Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing Second Edition
Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations Second
Edition
ISO
ISO
ISO
ISO
ISO/ASTM 51649
ISO/ASTM 51650
ISO/ASTM 51702
ISO/ASTM 51707
Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV Second Edition
Practice for use of a cellulose triacetate dosimetry system Second Edition
Practice for dosimetry in gamma irradiation facilities for radiation processing Second Edition
Guide for estimating uncertainties in dosimetry for radiation processing Second Edition
ISO
ISO/ASTM 51818
Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies between 80 and 300 KeV First Edition
ISO
ISO/ASTM 51900
ISO/ASTM 51939
ISO/ASTM 51940
ISO/ASTM 51956
ISO/ASTM 52116
ISO/IEEE 1107310101
ISO/IEEE 1107310201
ISO
ISP 10607-1
ISO
ISP 10607-2
ISO
ISP 10607-3
ISO
ISP 10607-4
ISO
ISP 10607-5
ISO
ISP 10607-6
ISO
ISP 10608-1
ISO
ISP 10608-2
ISO
ISP 10608-4
ISO
ISP 10608-5
Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 4: Definition of Profile TA53, Operation over a Token Ring LAN Subnetwork First Edition
Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 5: TA1111/TA1121 Profiles Including Subnetwork-Dependent Requirements for X.25 Packet-Switched Data
Networks Using Virtual Calls First Edition; Amendment 1-1998
ISO
ISP 10608-6
Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 6: Definition of Profile TA54, Operation over an FDDI LAN Subnetwork First Edition
ISO
ISO
ISO
ISO
ISO
ISO
Guide for Dosimetry in Radiation Research on Food and Agricultural Products First Edition
Practice for blood irradiation dosimetry Second Edition
Guide for dosimetry for sterile insect release programs Second Edition
Practice for use of thermoluminescencedosimetry (TLD) systems for radiation processing Second edition
Practice for dosimetry for a selfcontained dry-storage gamma-ray irradiator First Edition
Health informatics Point-of-care medical device communication Part 10101: Nomenclature First Edition
Health informatics Point-of-care medical device communication Part 10201: Domain information model First Edition
Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 1: Specification
of ACSE, Presentation and Session Protocols for the Use by FTAM Second Edition
Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 2: Definition of
Document Types, Constraint Sets and Syntaxes Second Edition
Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 3: AFT11 Simple File Transfer Service (Unstructured) Second Edition
Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 4: AFT12 Positional File Transfer Service (Flat) Second Edition
Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 5: AFT22 Positional File Access Service (Flat) Second Edition
Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 6: AFT3 - File
Management Service Second Edition
Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 1: General Overview and Subnetwork-Independent Requirements First Edition; Amendment 1-1998
Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 2: TA51 Profile Including Subnetwork-Dependent Requirements for CSMA/CD Local Area Networks (LANs)
First Edition
ISO
ISP 10608-7
ISO
ISP 10608-8
ISO
ISP 10608-12
ISO
ISP 10608-13
ISO
ISP 10608-14
ISO
ISP 10609-1
ISO
ISP 10609-2
ISO
ISP 10609-3
ISO
ISP 10609-4
ISO
ISP 10609-5
ISO
ISP 10609-6
ISO
ISP 10609-7
ISO
ISP 10609-8
Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 7: Security Employing the Network Layer Security Protocol - Connectionless-Mode for TAnnnn Profiles First
Edition
Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 8: Security Employing the Network Layer Security Protocol - Connection-Mode with SDT-PDU Based
Protection over X.25 Packet Switched Data Networks Using Virtual Calls, for TA1111/TA1121 Profiles First Edition
Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 12: MAC Sublayer and Physical Layer Dependent Requirements for a CSMA/CD LAN Subnetwork First
Edition
Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 13: MAC Sublayer and Physical Layer Dependent Requirements for a Token Ring LAN Subnetwork First
Edition
Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode
Network Service - Part 14: MAC, PHY and PMD Sublayer Dependent and Station Management Requirements over an FDDI LAN
Subnetwork First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 1: Subnetwork-Type Independent Requirements for Group TB First Edition; AS/NZS
4170.1: 1994
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 2: Subnetwork-Type Independent Requirements for Group TC First Edition; AS/NZS
4170.2: 1994
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 3: Subnetwork-Type Independent Requirements for Group TD First Edition; AS/NZS
4170.3: 1994
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 4: Subnetwork-Type Independent Requirements for Group TE First Edition; AS/NZS
4170.4: 1994
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 5: Definition of Profiles TB1111/TB1121 First Edition; AS/NZS 4170.5: 1994
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 6: Definition of Profiles TC1111/TC1121 First Edition; AS/NZS 4170.6: 1994
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 7: Definition of Profiles TD1111/TD1121 First Edition; AS/NZS 4170-7: 1994
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 8: Definition of Profiles TE1111/TE1121 First Edition; AS/NZS 4170.8: 1994
ISO
ISP 10609-9
ISO
ISP 10609-10
ISO
ISP 10609-11
ISO
ISP 10609-12
ISO
ISP 10609-14
ISO
ISP 10609-15
ISO
ISP 10609-16
ISO
ISP 10609-17
ISO
ISP 10609-20
ISO
ISP 10609-21
ISO
ISP 10609-22
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 9: Subnetwork-Type Dependent Requirements for Network Layer, Data Link Layer and
Physical Layer Concerning Permanent Access to a Packet Switched Data Network Using Virtual Calls First Edition; Amendment 11998
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 10: LAN Subnetwork-Dependent, Media-Independent Requirements First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 11: CSMA/CD Subnetwork-Dependent, Media-Dependent Requirements First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 12: Definition of Profile TC51, Provision of the OSI Connection-Mode Transport Service
Using the OSI Connection-Mode Network Service in an End System Attached to a CSMA/CD LAN First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 14: Definition of Profile TC53, Provision of the OSI Connection-Mode Transport Service
Using the OSI Connection-Mode Network Service in an End System Attached to a Token Ring LAN First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 15: Definition of Profile TC54, Provision of the OSI Connection-Mode Transport Service
Using the OSI Connection-Mode Network Service in an End System Attached to an FDDI LAN First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 16: Security Employing the Network Layer Security Protocol - Connection-Mode with NoHeader, for TB, TC, TD, and TE Profiles First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 17: Security Employing the Network Layer Security Protocol - Connection-Mode, with SDTPDU Based Protection, for TB/TC/TD/TEnnn Profiles First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 20: Overview of the Generalized Multi-Part ISP Structure for TC and TD Group Profiles for
OSI Usage of ISDN First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 21: Subnetwork-Type Dependent Requirements for Network Layer and Data Link Layer for
ISDN B-Channel X.25 DTE to DTE Operation First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 22: Subnetwork-Type Dependent Requirements for Network Layer and Data Link Layer for
ISDN B-Channel X.25 DTE to DCE Operation First Edition
ISO
ISP 10609-23
ISO
ISP 10609-24
ISO
ISP 10609-25
ISO
ISP 10609-26
ISO
ISP 10609-27
ISO
ISP 10609-28
ISO
ISP 10609-30
ISO
ISP 10609-31
ISO
ISP 10609-32
ISO
ISP 10609-33
ISO
ISP 10609-34
ISO
ISP 10609-35
ISO
ISP 10609-36
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 23: Subnetwork-Type Dependent Requirements for Network Layer and Data Link Layer for
Data Transfer Concerning a Packet Switched Mode Integrated Services Digital Network Using Virtual Calls: B-Channel Access Case
First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 24: Subnetwork-Type Dependent Requirements for Network Layer and Data Link Layer for
Data Transfer Concerning a Packet Switched Mode Integrated Services Digital Network Using Virtual Calls: D-Channel Access Case
First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 25: Subnetwork-Type Dependent Requirements for Q.931 Circuit-Switched Operation First
Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 26: Subnetwork-Type Dependent Requirements for Network Layer for Call Control
Procedures Concerning the Outgoing Call of a Packet Switched Mode Integrated Services Digital Network in Case B Using Virtual
Calls First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 27: Subnetwork-Type Dependent Requirements for Network Layer for Call Control
Procedures Concerning the Incoming Call of a Packet Switched Mode Integrated Services Digital Network in Case B Using Virtual
Calls First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 28: Subnetwork-Type Dependent Requirements for Data Link Layer for End Systems
Attached to an ISDN Subnetwork First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 30: Definition of Profile TC1131 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 31: Definition of Profile TC1231 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 32: Definition of Profile TC4111 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 33: Definition of Profile TC4211 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 34: Definition of Profile TC43111 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 35: Definition of Profile TC43112 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 36: Definition of Profile TC43211 First Edition
ISO
ISP 10609-37
ISO
ISP 10609-38
ISO
ISP 10609-40
ISO
ISP 10609-41
ISO
ISP 10609-42
ISO
ISP 10609-43
ISO
ISP 10609-44
ISO
ISP 10609-45
ISO
ISP 10609-46
ISO
ISP 10609-47
ISO
ISP 10609-48
ISO
ISP 10610-1
ISO
ISP 10611-1
ISO
ISP 10611-3
ISO
ISP 10611-4
ISO
ISP 10611-5
ISO
ISP 10611-6
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 37: Definition of Profile TC43212 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 38: Definition of Profile TC4331 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 40: Definition of Profile TD1131 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 41: Definition of Profile TD1231 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 42: Definition of Profile TD4111 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 43: Definition of Profile TD4211 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 44: Definition of Profile TD43111 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 45: Definition of Profile TD43112 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 46: Definition of Profile TD43211 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 47: Definition of Profile TD43212 First Edition
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over
Connection-Mode Network Service - Part 48: Definition of Profile TD4331 First Edition
Information Technology - International Standardized Profile FOD11 - Open Document Format: Simple Document Structure Character Content Architecture Only - Part 1: Document Application Profile (DAP) First Edition; Technical Corrigendum 1-1998
Information technology International Standardized Profiles AMH1n Message Handling Systems Common Messaging Part 1: MHS
Service Support Third Edition
Information technology International Standardized Profiles AMH1n Message Handling Systems Common Messaging Part 3:
AMH11 Message Transfer (P1) Third Edition
Information technology International Standardized Profiles AMH1n Message Handling Systems Common Messaging Part 4:
AMH12 and AMH14 MTS Access (P3) and MTS 94 Access (P3) Third Edition
Information technology International Standardized Profiles AMH1n Message Handling Systems Common Messaging Part 5:
AMH13 MS Access (P7) Third Edition
Information technology International Standardized Profiles AMH1n Message Handling Systems Common Messaging Part 6:
AMH15 - MS 94 Access (P7) Second Edition
ISO
ISP 10612-1
ISO
ISP 10612-2
ISO
ISP 10612-3
ISO
ISP 10612-4
ISO
ISP 10612-5
ISO
ISP 10612-6
ISO
ISP 10612-7
ISO
ISP 10612-8
ISO
ISP 10612-9
ISO
ISP 10613-1
ISO
ISP 10613-2
ISO
ISP 10613-3
ISO
ISP 10613-4
ISO
ISP 10613-5
ISO
ISP 10613-6
ISO
ISP 10613-7
Information technology - International Standardized Profile RD - Relaying the MAC Service using transparent bridging - Part 1:
Subnetwork-independent requirements
Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 2:
CSMA/CD LAN Subnetwork-Dependent, Media-Dependent Requirements First Edition
Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 3:
Token Ring LAN Subnetwork-Dependent, Media-Dependent Requirements First Edition
Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 4:
Profile RD51.51 (CSMA/CD LAN - CSMA/CD LAN) First Edition
Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 5:
Profile RD51.54 (CSMA/CD LAN - FDDI LAN) First Edition
Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 6:
Profile RD54.54 (FDDI LAN - FDDI LAN) First Edition
Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 7:
Profile RD51.53 (CSMA/CD LAN - Token Ring LAN) First Edition
Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 8:
Profile RD53.53 (Token Ring LAN - Token Ring LAN) First Edition
Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 9:
Profile RD53.54 (Token Ring LAN - FDDI LAN) First Edition
Information Techonology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 1:
Subnetwork-Independent Requirements First Edition; Amendment 2: 07/18/1998
Information Techonology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 2: LAN
Subnetwork-Dependent, Media-Independent Requirements First Edition
Information Techonology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 3:
CSMA/CD LAN Subnetwork-Dependent, Media-Dependent Requirements First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 4: FDDI
LAN Subnetwork-Dependent, Media-Dependent Requirements First Edition
Information Techonology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 5:
Definition of Profile RA51.51, Relaying the Connectionless-Mode Network Service Between CSMA/CD LAN Subnetworks First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 6:
Definition of Profile RA51.54, Relaying the Connectionless-Mode Network Service between CSMA/CD LAN Subnetworks and FDDI
LAN Subnetworks First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 7: PSDN
Subnetwork-Dependent, Media-Dependent Requirements for Virtual Calls over a Permanent Access First Edition; Amendment:
6/15/1998
ISO
ISP 10613-8
ISO
ISP 10613-9
ISO
ISP 10613-10
ISO
ISP 10613-11
ISO
ISP 10613-12
ISO
ISP 10613-13
ISO
ISP 10613-14
ISO
ISP 10613-15
ISO
ISP 10613-16
ISO
ISP 10613-17
ISO
ISP 10613-18
ISO
ISP 10613-19
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 8:
Definition of Profile RA51.1111, Relaying the Connectionless-Mode Network Service between CSMA/CD LAN Subnetworks and
PSDNs Using Virtual Calls over a PSTN Leased Line Permanent Access First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 9:
Definition of Profile RA51.1121, Relaying the Connectionless-Mode Network Service between CSMA/CD LAN Subnetworks and
PSDNs Using Virtual Calls over a Digital Data Circuit/CSDN Leased Line Permanent Access First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 10:
Token Ring LAN Subnetwork-Dependent, Media-Dependent Requirements First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 11:
Definition of Profile RA51.53, Relaying the Connectionless-Mode Network Service between CSMA/CD LAN Subnetworks and Token
Ring LAN Subnetworks First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Services - Part 12:
Definition of Profile RA53.53, Relaying the Connectionless-Mode Network Service between Token Ring LAN Subnetworks First
Edition
Information Technology - International Standardization Profile RA - Relaying the Connectionless-Mode Network Service - Part 13:
Definition of Profile RA53.54, Relaying the Connectionless-Mode Network Service between Token Ring LAN Subnetworks and FDDI
LAN Subnetworks First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 14:
Definition of Profile RA54.54, Relaying the Connectionless-Mode Network Service between FDDI LAN Subnetworks First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 15:
Definition of Profile RA53.1111, Relaying the Connectionless-Mode Network Service between Token Ring LAN Subnetworks and
PSDNs Using Virtual Calls Over PSTN Leased Line Permanent Access First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 16:
Definition of Profile RA53.1121, Relaying the Connectionless-Mode Network Service between Token Ring LAN Subnetworks and
PSDNs Using Virtual Calls over a Digital Data Circuit/CSDN Leased Line Permanent Access First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 17:
Definition of Profile RA54.1111, Relaying the Connectionless-Mode Network Service between FDDI LAN Subnetworks and PSDNs
Using Virtual Calls over a PSTN Leased Line Permanent Access First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 18:
Definition of Profile RA54.1121, Relaying the Connectionless-Mode Network Service between FDDI LAN Subnetworks and PSDNs
Using Virtual Calls over a Digital Data Circuit/CSDN Leased Line Permanent Access First Edition
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 19:
Security Employing the Network Layer Security Protocol - Connectionless-Mode, for RAnn.nn Profiles First Edition
ISO
ISP 10613-20
ISO
ISP 10614-1
ISO
ISP 10614-2
ISO
ISP 10614-3
ISO
ISP 10614-4
ISO
ISP 10614-5
ISO
ISP 10614-6
Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 20:
Security Employing the Network Layer Security Protocol - Connection-Mode with SDT-PDU Based Protection over X.25 Packet
Switched Data Networks Using Virtual Calls, RA1111/RA1121 Profiles First Edition
Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 1: Subnetwork-Independent
Requirements First Edition
Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 2: LAN Subnetwork-Dependent, MediaIndependent Requirements First Edition
Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 3: CSMA/CD LAN SubnetworkDependent, Media-Dependent Requirements First Edition
Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 4: PSDN Subnetwork-Dependent,
Media-Dependent Requirements for Virtual Calls over a Permanent Access First Edition
Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 5: Definition of Profile RC51.1111,
X.25 Protocol Relaying between CSMA/CD LAN Subnetworks and PSDNs Using Virtual Calls over a PSTN Leased Line Permanent
Access First Edition
Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 6: Definition of Profile RC51.1121,
X.25 Protocol Relaying between CSMA/CD LAN Subnetworks and PSDNs Using Virtual Calls over a Digital Data Circuit/CSDN
Leased Line Permanent Access First Edition
ISO
ISP 10615-3
Information Technology - International Standardized Profiles ADInn - OSI Directory - Part 3: ADI21 - DSA Performer Role First Edition
ISO
ISP 10615-4
ISO
ISP 10615-5
ISO
ISP 10615-6
ISO
ISP 10616
ISO
ISP 11181-1
ISO
ISP 11182-1
Information Technology - International Standardized Profiles ADInn - OSI Directory - Part 4: ADI22 - DSA Invoker Role First Edition
Information Technology - International Standardized Profiles ADInn - OSI Directory - Part 5: ADI31 - DUA Support for Distributed
Operations First Edition
Information Technology - International Standardized Profiles ADInn - OSI Directory - Part 6: ADI32 - DSA Support for Distributed
Operations First Edition
Information Technology - International Standardized Profile FDI11 - Directory Data Definitions - Common Directory Use (Normal) First
Edition
Information Technology - International Standardized Profile FOD26 - Open Document Format: Enhanced Document Structure Character, Raster Graphics and Geometric Graphics Content Architectures - Part 1: Document Application Profile (DAP) First Edition;
Technical Corrigendum 1: 04/15/1998
Information Technology - International Standardized Profile FOD36 - Open Document Format: Extended Document Structure Character, Raster Graphics and Geometric Graphics Content Architectures - Part 1: Document Application Profile (DAP) First Edition;
Technical Corrigendum 1-1998
ISO
ISP 11183-1
Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications - Part 1:
Specification of ACSE, Presentation and Session Protocols for the Use by ROSE and CMISE First Edition; AS/NZS 4248.1: 1994
ISO
ISP 11183-2
ISO
ISP 11183-3
ISO
ISP 11184-1
ISO
ISP 11184-2
ISO
ISP 11184-3
ISO
ISP 11185-1
ISO
ISP 11185-2
ISO
ISP 11185-3
ISO
ISP 11185-4
ISO
ISP 11185-5
ISO
ISP 11185-6
ISO
ISP 11185-7
Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications - Part 2:
CMISE/ROSE for AOM12 - Enhanced Management Communications First Edition; EN ISP 11183-2: 1994; AS/NZS 4248.2: 1994
Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications - Part 3:
CMISE/ROSE for AOM11 - Basic Management Communications First Edition; Corrected and Reprinted - 1993; EN ISP 11183-3:
1994; AS/NZS 4248.3: 1994
Information Technology - International Standardized Profiles FVT1nn - Virtual Terminal Basic Class - Register of VTE-Profiles - Part
1: FVT121, FVT122 - S-Mode Forms and Paged VTE-Profiles First Edition
Information Technology - International Standardized Profiles FVT1nn - Virtual Terminal Basic Class - Register of VTE-Profiles - Part
2: FVT115 - A-Mode Generalized Telnet VTE-Profile First Edition
Information Technology - International Standardized Profiles FVT1nn - Virtual Terminal Basic Class - Register of VTE-Profiles - Part
3: FVT114 - A-Mode Transparent VTE-Profile
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 1: FVT211, FVT212 - Sequenced and Unsequenced Application Control Objects First Edition; CEN EN ISP 111851: 1995
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 2: FVT213, FVT214 - Sequenced and Unsequenced Terminal Control Objects First Edition; CEN EN ISP 11185-2:
1995
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 3: FVT215, FVT216 - Application RIO Record Loading Control Object, Terminal RIO Record Notification Control
Object First Edition
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 4: FVT217 - Horizontal Tabulation Control Object First Edition; CEN EN ISP 11185-4: 1995
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 5: FVT218 - Logical Image Control Object First Edition; CEN EN ISP 11185-5: 1995
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 6: FVT219 - Status Message Control Object First Edition; CEN EN ISP 11185-6: 1995
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 7: FVT2110 - Entry-Control Control Object First Edition; CEN EN ISP 11185-7: 1995
ISO
ISP 11185-8
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 8: FVT221 - Forms FEICO (Field Entry Instruction Control Object) No. 1 First Edition; CEN EN ISP 11185-8: 1995
ISO
ISP 11185-9
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 9: FVT222 - Paged FEICO (Field Entry Instruction Control Object) No. 1 First Edition (CEN EN ISP 11185-9: 1995)
ISO
ISP 11185-10
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 10: FVT231 - Forms FEPCO (Field Entry Pilot Control Object) No. 1 First Edition; CEN EN ISP 11185-10: 1995
ISO
ISP 11185-11
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 11: FVT232 - Paged FEPCO (Field Entry Pilot Control Object) No. 1 First Edition; CEN EN ISP 11185-11: 1995
ISO
ISP 11185-12
ISO
ISP 11185-13
ISO
ISP 11185-14
ISO
ISP 11185-15
ISO
ISP 11185-16
ISO
ISP 11185-17
ISO
ISP 11186-1
ISO
ISP 11186-2
ISO
ISP 11186-3
ISO
ISP 11186-4
ISO
ISP 11187-1
ISO
ISP 11187-2
ISO
ISP 11187-3
ISO
ISP 11187-4
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions Part 12: FVT2116 - Generalized Telnet Synch Control Object; FVT2117 - Generalized Telnet Signal Control Object;
FVT2118 - Generalized Telnet Negotiation Control Object; FVT2119 - Generalized Telnet Subnegotiation Control Object First Edition
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 13: FVT2111 - Waiting Time Control Object First Edition
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 14: FVT2112 - Printer Control Object First Edition
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 15: FVT2113 - Field Definition Management Control Object First Edition
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 16: FVT2114 - Terminal Signal Titles Control Object First Edition
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type
Definitions - Part 17: FVT2115 - Help Text Control Object First Edition
Information Technology - International Standardized Profiles FVT3nn - Virtual Terminal Basic Class - Register of Attribute
Assignment Type Definitions - Part 1: FVT321 - Font Assignment Type No. 1 First Edition
Information Technology - International Standardized Profiles FVT3nn - Virtual Terminal Basic Class - Register of Attribute
Assignment Type Definitions - Part 2: FVT311 - Repertoire Assignment Type for ISO/IEC 10646 First Edition
Information Technology - International Standardized Profiles FVT3nn - Virtual Terminal Basic Class - Register of Attribute
Assignment Type Definitions - Part 3: FVT312 - Repertoire Assignment Type for ISO/IEC 2022 Level 2 First Edition
Information Technology - International Standardized Profiles FVT3nn - Virtual Terminal Basic Class - Register of Attribute
Assignment Type Definitions - Part 4: FVT322 - Font Assignment Type No. 2 First Edition
Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part
1: Common VT Protocol Requirements First Edition
Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part
2: Common Supporting Layers Requirements First Edition
Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part
3: AVT22 - S-Mode Forms Application Profile First Edition
Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part
4: AVT23 - S-Mode Paged Application Profile First Edition
ISO
ISP 11187-5
ISO
ISP 11187-6
ISO
ISP 11188-1
ISO
ISP 11188-2
ISO
ISP 11188-3
ISO
ISP 11190
ISO
ISP 12059-0
ISO
ISP 12059-1
ISO
ISP 12059-2
ISO
ISP 12059-3
ISO
ISP 12059-4
ISO
ISP 12059-5
ISO
ISP 12059-6
ISO
ISP 12059-13
ISO
ISP 12060-1
ISO
ISP 12060-2
ISO
ISP 12060-3
ISO
ISP 12060-4
Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part
5: AVT16 - A-Mode Generalized Telnet Application Profile First Edition
Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part
6: AVT15 - A-Mode Transparent Application Profile First Edition
Information Technology - International Standardized Profile - Common Upper Layer Requirements - Part 1: Basic Connection
Oriented Requirements First Edition
Information Technology - International Standardized Profile - Common Upper Layer Requirements - Part 2: Basic Connection
Oriented Requirements for ROSE-Based Profiles First Edition
Information Technology - International Standardized Profile - Common Upper Layer Requirements - Part 3: Minimal OSI Upper Layer
Facilities First Edition
Information Technology - International Standardized Profile FDI3 - Directory Data Definitions - FTAM Use of the Directory First
Edition; CEN EN ISO/IEC ISP 11190: 1996
Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 0: Common Definitions for Management Function Profiles First Edition
Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 1: Object Management First Edition
Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 2: State Management First Edition
Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 3: Attributes for Representing Relationships First Edition
Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 4: Alarm Reporting First Edition
Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 5: Event Report Management First Edition
Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 6: Log Control First Edition
Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 13: Summarization First Edition
Information Technology - International Standardized Profiles OSI Management - Management Functions - Part 1: AOM211 - General
Management Capabilities First Edition
Information Technology - International Standardized Profiles OSI Management - Management Functions - Part 2: AOM212 - Alarm
Reporting and State Management Capabilities First Edition
Information Technology - International Standardized Profiles OSI Management - Management Functions - Part 3: AOM213 - Alarm
Reporting Capabilities First Edition
Information Technology - International Standardized Profiles OSI Management - Management Functions - Part 4: AOM221 - General
Event Report Management First Edition
ISO
ISP 12060-5
ISO
ISP 12060-8
ISO
ISP 12061-1
ISO
ISP 12061-2
ISO
ISP 12061-3
ISO
ISP 12061-4
Information Technology - International Standardized Profiles - OSI Management - Management Functions - Part 5: AOM231 General Log Control First Edition
Information Technology - International Standardized Profiles - OSI Management - Management Functions - Part 8: AOM253X Summarization Objects (Including Profiles AOM2531-AOM2539) First Edition
Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction
Processing - Part 1: Introduction to the Transaction Processing Profiles First Edition
Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction
Processing - Part 2: Support of OSI TP APDUs First Edition
Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction
Processing - Part 3: Support of CCR APDUs First Edition
Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction
Processing - Part 4: Support of Session, Presentation and ACSE PDUs First Edition
ISO
ISP 12061-5
Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction
Processing - Part 5: Application Supported Transactions - Polarized Control (ATP11) First Edition; CEN EN ISP 12061-5: 1996
ISO
ISP 12061-6
ISO
ISP 12061-7
Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction
Processing - Part 6: Application Supported Transactions - Shared Control (ATP12) First Edition; CEN EN ISP 12061-6: 1996
Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction
Processing - Part 7: Provider Supported Unchained Transactions - Polarized Control (ATP21) First Edition; CEN EN ISP 12061-7:
1996
ISO
ISP 12061-8
Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction
Processing - Part 8: Provider Supported Unchained Transactions - Shared Control (ATP22) First Edition; CEN EN ISP 12061-8: 1996
ISO
ISP 12061-9
Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction
Processing - Part 9: Provider Supported Chained Transactions - Polarized Control (ATP31) First Edition; CEN EN ISP 12061-9: 1996
ISO
ISP 12061-10
ISO
ISP 12062-1
ISO
ISP 12062-2
ISO
ISP 12062-3
Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction
Processing - Part 10: Provider Supported Chained Transactions - Shared Control (ATP32) First Edition; CEN EN ISP 12061-10: 1996
Information technology International Standardized Profiles AMH2n Message Handling Systems Interpersonal Messaging Part 1:
IPM MHS Service Support Third Edition
Information technology International Standardized Profiles AMH2n Message Handling Systems Interpersonal Messaging Part 2:
AMH21 IPM Content Third Edition
Information technology International Standardized Profiles AMH2n Message Handling Systems Interpersonal Messaging Part 3:
AMH22 IPM Requirements for Message Transfer (P1) Third Edition
ISO
ISP 12062-4
ISO
ISP 12062-5
ISO
ISP 12062-6
ISO
ISP 12064-1
ISO
ISP 12067-1
ISO
ISP 12067-2
ISO
ISP 12067-3
ISO
ISP 12067-4
ISO
ISP 12067-5
ISO
ISP 12068-1
ISO
ISP 12068-2
ISO
ISP 12069-1
ISO
ISP 12069-2
ISO
ISP 12069-3
ISO
ISP 12069-4
ISO
ISP 12069-5
ISO
ISP 12069-6
Information technology International Standardized Profiles AMH2n Message Handling Systems Interpersonal Messaging Part 4:
AMH23 and AMH25 IPM Requirements for MTS Access (P3) and MTS 94 Access (P3) Third Edition
Information technology International Standardized Profiles AMH2n Message Handling Systems Interpersonal Messaging Part 5:
AMH24 IPM Requirements for Enhanced MS Access (P7) Third Edition
Information technology International Standardized Profiles AMH2n Message Handling Systems Interpersonal Messaging Part 6:
AMH26 IPM Requirements for Enhanced MS 94 Access (P7) First Edition
Information Technology - International Standardized Profile FOD112 - Open Document Format: Image Applications - Simple
Document Structure - Raster Graphics Content Architecture - Part 1: Document Application Profile (DAP) First Edition
Information Technology - International Standardized Profile RB - Relaying the Connection-Mode Network Service - Part 1:
Subnetwork-Independent Requirements First Edition
Information Technology - International Standardized Profile RB - Relaying the Connection-Mode Network Service - Part 2: LAN
Subnetwork-Dependent Media-Independent Requirements First Edition
Information Technology - International Standardized Profile RB - Relaying the Connection-Mode Network Service - Part 3: PSDN
Subnetwork-Dependent Media-Dependent Requirements for Vitual Calls over a Permanent Access First Edition
Information Technology - International Standardized Profile RB - Relaying the Connection-Mode Network Service - Part 4: Definition
of Profile RB51.1111, Relaying the Connection-Mode Network Service Between CSMA/CD LAN Subnetworks and PSDNs Using
Virtual Calls over a PSTN Leased Line Permanent Access First Edition
Information Technology - International Standardized Profile RB - Relaying the Connection-Mode Network Service - Part 5: Definition
of Profile RB51.1121, Relaying the Connection-Mode Network Service Between CSMA/CD LAN Subnetworks and PSDNs Using
Virtual Calls over a Digital Data Circuit/CSDN Leased Line Permanent Access First Edition
Information Technology - International Standardized Profile FDI 4 - Directory Data Definitions - Use of the Directory for OSI TP - Part
1: FDI 41 - Basic Naming and Addressing First Edition
Information Technology - International Standardized Profile FDI 4 - Directory Data Definitions - Use of the Directory for OSI TP - Part
2: FDI 42 - Enhanced Naming and Addressing First Edition
Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 1: Introduction to
the DFR ISP First Edition
Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 2: Specification of
ROSE, RTSE, ACSE, Presentation and Session Protocols for Use by DFR First Edition
Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 3: ADF11 Common Document Filing and Retrieval - Read Only Profile First Edition
Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 4: ADF12 Common Filing and Retrieval - Archiving Profile First Edition
Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 5: ADF13 Common Filing and Retrieval - Document Store Manipulation Profile First Edition
Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 6: ADF21 - Remote
Store Management - Simple Management Profile First Edition
ISO
ISP 12069-7
ISO
ISP 12070-1
ISO
ISP 12071-1
ISO
ISP 12071-2
ISO
ISP 12071-3
ISO
ISP 12071-4
ISO
ISO
ISP 12072
ISP 12073
ISO
ISP 15121-1
ISO
ISP 15121-2
ISO
ISP 15121-3
ISO
ISP 15124-1
ISO
ISP 15125-4
ISO
ISP 15125-7
ISO
ISP 15125-10
ISO
ISP 15125-12
ISO
ISP 15126-1
ISO
ISP 15126-2
Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 7: ADF22 - Remote
Store Management - Full Management Profile First Edition
Information Technology - International Standardized Profiles FCSnnn - Character Set 8-Bit Code Structure Based on ISO/IEC 2022 Part 1: FCS111 - 2022 Option 1 First Edition; BS EN ISP 12070-1: 1997
Information Technology - International Standardized Profile FCG-nnn - Computer Graphics Metafile Interchange Format - Part 1:
FCG11 - Basic Scientific and Technical Graphics (BST) First Edition
Information Technology - International Standardized Profile FCG-nnn - Computer Graphics Metafile Interchange Format - Part 2:
FCG23 - Advanced Scientific and Technical Graphics (AST) First Edition
Information Technology - International Standardized Profile FCG-nnn - Computer Graphics Metafile Interchange Format - Part 3:
FCG32 - Basic Presentation and Visualization - Model Profile First Edition
Information Technology - International Standardized Profile FCG-nnn - Computer Graphics Metafile Interchange Format - Part 4:
FCG33 - Advanced Presentation and Visualization (APV) First Edition
Information Technology - International Standardized Profile FD15 - Directory Data Definitions - VT Use of the Directory First Edition
Information Technology -International Standardized Profile FD16 - Directory Use by EDI First Edition
Information Technology - International Standardized Profile AOD1n - Interactive Manipulation of ODA Documents - Part 1: AOD11 DTAM/Read Only First Edition
Information Technology - International Standardized Profile AOD1n - Interactive Manipulation of ODA Documents - Part 2: AOD12 DTAM/Insert First Edition
Information Technology - International Standardized Profile AOD1n - Interactive Manipulation of ODA Documents - Part 3: AOD13 DTAM/ Manipulation First Edition
Information Technology - International Standardized Profile FOD126 - Open Document Format: Image Applications - Enhanced
Document Structure - Character, Raster Graphics, and Geometric Graphics Content Architecture - Part 1: Document Application
Profile (DAP) First Edition
Information Technology - International Standardized Profiles ADYnn - OSI Directory - Part 4: ADY22 - DSA Support of Distributed
Operations First Edition
Information Technology - International Standardized Profiles ADYnn - OSI Directory - Part 7: ADY43 - DSA to DSA Authentication
First Edition
Information Technology - International Standardized Profiles ADYnn - OSI Directory - Part 10: ADY51 - Shadowing Using ROSE First
Edition
Information Technology - International Standardized Profiles ADYnn - OSI Directory - Part 12: ADY53 - Shadowing Subsets First
Edition
Information Technology - International Standardized Profiles FDY1n - Directory Data Definitions - Part 1: FDY11 - Common Directory
Use (Normal) First Edition
Information Technology - International Standardized Profiles FDY1n - Directory Data Definitions - Part 2: FDY12 - Directory System
Schema First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISP 15287-2
IWA 1
IWA 3
IWA 4
IWA 5
PAS 11154
PAS 11856
PAS 12158
PAS 15594
PAS 16917
ISO
ISO
ISO
ISO
ISO
PAS 16940
PAS 17001
PAS 17002
PAS 17003
PAS 17004
ISO
ISO
PAS 17684
PAS 17712
ISO
ISO
ISO
ISO
PAS 17984
PAS 18152
PAS 18873
PAS 20858
ISO
ISO
ISO
PAS 21308-1
PAS 22574
PAS 22720
ISO
ISO
PAS 22853
PAS 26183
ISO
PAS 27145-1
ISO
PAS 27145-2
Information Technology - Standardized Application Environment Profile - Part 2: Posix Realtime Application Support (AEP) First
Edition; IEEE Std 1003.13
Quality management systems Guidelines for process improvements in health service organizations Second Edition
Image safety Reducing the incidence of undesirable biomedical effects caused by visual image sequences
Quality management systems Guidelines for the application of ISO 9001:2000 in local government
Emergency preparedness
Road vehicles Roof load carriers First Edition; Replaces ISO 11154-1:1995 and ISO 11154-4:2004
Textile Floor Coverings - Test Methods for the Determination of Fibre Bind First Edition
Road Vehicles Braking Systems Temperature Measuring Methods First Edition
Airport hydrogen fuelling facility operations First Edition
Ships and Marine Technology - Data Transfer Standard for Maritime and Internodal Transportation and Security First Edition
Glass in building Glazing and airborne sound insulation Measurement of the mechanical impedance of laminated glass First Edition
Conformity assessment Impartiality Principles and requirements First Edition
Conformity assessment Confidentiality Principles and requirements First Edition
Conformity assessment Complaints and appeals Principles and requirements First Edition
Conformity assessment Disclosure of information Principles and requirements First Edition
Transport information and control systems In-vehicule navigation systems ITS message set translator to ASN.1 format definitions
First Edition
Freight containers Mechanical seals Second Edition
Machine-Made Textile Floor Coverings - Determination of Dimensional Changes After Exposure to Heat and/or Water First Edition
Ergonomics of human-system interaction Specification for the process assessment of human-system issues First Edition
International protocol for doping control First Edition
Ships and marine technology Maritime port facility security assessments and security plan development First Edition
Road vehicles ù Product data exchange between chassis and bodywork manufacturers (BEP) ù Part 1: General principles First
Edition
Road vehicles ù Brake linings frictions materials ù Visual inspection First Edition
ASAM Open Data Services 5.0 First edition
Ships and marine technology Computer applications Specification of Maritime Safety Markup Language (MSML) First Edition
SASIG Product data quality guidelines for the global automotive industry First Edition
Road vehicles Implementation of WWH-OBD communication requirements Part 1: General information and use case definition First
Edition
Road vehicles Implementation of WWH-OBD communication requirements Part 2: Common emissions-related data dictionary First
Edition
ISO
PAS 27145-3
ISO
PAS 27145-4
ISO
ISO
ISO
ISO
ISO
PAS 28001
PAS 28004
R538
R644
R784
ISO
ISO
ISO
ISO
ISO
ISO
ISO
843
R916
R1938
TR 140-13
TR 210
TR 211
TR 224
ISO
ISO
TR 230-9
TR 581
ISO
ISO
ISO
TR 834-3
TR 896
TR 1417
ISO
TR 1896
ISO
TR 2801
ISO
ISO
ISO
ISO
ISO
TR 3313
TR 3352
TR 3666
TR 3814
TR 3834-6
Road vehicles Implementation of WWH-OBD communication requirements Part 3: Common message dictionary First Edition
Road vehicles Implementation of WWH-OBD communication requirements Part 4: Connection between vehicle and test equipment
First Edition
Security management systems for the supply chain Best practices for implementing supply chain security Assessments and plans
First Edition
Security management systems for the supply chain Guidelines for the implementation of ISO/PAS 28000 First Edition
Conventional Signs to Be Used in Schemes for the Installations of Pipeline Systems in Ships First Edition
Conventional Signs to Be Used in Schemes for the Installations of Ventilation Systems in Ships First Edition
Conventional Signs to Be Used in Schemes for the Installations of Sanitary Systems in Ships First Edition
Information and Documentation - Conversion of Greek Characters into Latin Characters First Edition; Corrected and Reprinted
05/01/1999
Testing of Refrigerating Systems First Edition
ISO System of Limits and Fits Part II: Inspection of Plain Workpieces First Edition
Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 13: Guidelines First Edition
Essential Oils - General Rules for Packaging, Conditioning and Storage First Edition
Essential Oils - General Rules for Labelling and Marking of Containers First Edition
Aircraft - Declaration of Design and Performance for Aircraft Equipment - Standard Form First Edition
Test code for machine tools Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic
equations First Edition
Weldability Metallic materials General principles First Edition; Replaces ISO 581: 1980
Fire-Resistance Tests - Elements of Building Construction - Part 3: Commentary on Test Method and Test Data Application First
Edition
Surface Active Agents - Scientific Classification First Edition
Automobiles - Anchorages for Seat Belts First Edition
Products in Fibre-Reinforced Cement - Non-Combustible Fibre-Reinforced Boards of Calcium Silicate or Cement for Insulation and
Fire Protection First Edition
Clothing for protection against heat and flame ù General recommendations for selection, care and use of protective clothing First
Edition [Replaced: ISO 2801, ISO 2801]
Measurement of Fluid Flow in Closed Conduits - Guidelines on the Effects of Flow Pulsations on Flow-Measurement Instruments
Third Edition
Acoustics - Assessment of Noise with Respect to Its Effect on the Intelligibility of Speech First Edition
Viscosity of Water Second Edition
Tests for MeasuringReaction-to-Fire" of Building Materials - Their Development and Application Second Edition;"
Quality requirements for fusion welding of metallic materials ù Part 6: Guidelines on implementing ISO 3834 First edition
ISO
ISO
ISO
ISO
TR 3956
TR 4114
TR 4137
TR 4191
ISO
ISO
ISO
TR 4558
TR 4745
TR 4830-4
ISO
TR 4869-4
ISO
ISO
ISO
TR 4869-5
TR 4870
TR 4918
ISO
TR 5045
ISO
TR 5046
ISO
ISO
TR 5047
TR 5307
ISO
ISO
ISO
ISO
ISO
TR 5460
TR 5658-1
TR 5659-3
TR 5660-3
TR 5924
ISO
ISO
ISO
ISO
TR 5925-2
TR 5987
TR 6065
TR 6132
ISO
ISO
TR 6167
TR 6306
Principles of Structural Fire-Engineering Design with Special Regard to the Connection Between Real Fire Exposure and the Heating
Conditions of the Standard Fire-Resistance Test (ISO 834) First Edition
Road Vehicles - Caravans and Light Trailers - Static Load on Ball Couplings First Edition
Plastics - Determination of Modulus of Elasticity by Alternating Flexure First Edition
Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Water Supply - Recommended Practice for Laying First Edition
Small Craft - Rigging Screws for Stainless Steel Wire Rope - Principal Dimensions for Forks, Connection Pins and Eye-Holes First
Edition
High Conductivity Copper - Spiral Elongation Test First Edition
Steel - Determination of Low Carbon Contents - Part IV: Coulometric Method After Combustion First Edition
Acoustics - Hearing Protectors - Part 4: Measurement of Effective Sound Pressure Levels for Level-Dependent Sound-Restoration
Ear-Muffs First Edition
Acoustics Hearing protectors Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects First
Edition
Acoustics - the Construction and Calibration of Speech Intelligibility Tests First Edition
Textile Floor Coverings - Determination of Wear - Castor Chair Test First Edition
Continuous Mechanical Handling Equipment - Safety Code for Belt Conveyors - Examples for Guarding of Nip Points First Edition
Continuous Mechanical Handling Equipment - Safety Code for Conveyors and Elevators with Chain-Elements - Examples for
Guarding of Nip Points First Edition
Continuous Mechanical Handling Equipment - Chain Conveyors with Bearing Devices or Load Carriers - Examples of Protection
Against Injuries by Load Carriers First Edition
Solid Fertilizers - Derivation of a Sampling Plan for the Evaluation of a Large Delivery First Edition
Technical Drawings - Geometrical Tolerancing - Tolerancing of Form, Orientation, Location and Run-Out - Verification Principles and
Methods - Guidelines First Edition
Reaction to Fire Tests - Spread of Flame - Part 1: Guidance on Flame Spread First Edition
Plastics - Smoke Generation - Part 3: Determination of Optical Density by a Dynamic-Flow Method First Edition
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement First Edition
Fire Tests - Reaction to Fire - Smoke Generated by Building Products (Dual-Chamber Test) First Edition
Fire tests Smoke-control door and shutter assemblies Part 2: Commentary on test method and the applicability of test conditions
and the use of test data in a smoke containment strategy Second Edition
Inland Navigation - Water Fire-Fighting System - Couplings of Fire Hoses - General Technical Requirements First Edition
Shipbuilding and Marine Structures - Inflatable Liferafts - Materials First Edition
Numerical Control of Machines - Operational Command and Data Format First Edition
Fire-Resistance Tests - Contribution Made by Suspended Ceilings to the Protection of Steel Beams in Floor and Roof Assemblies
First Edition
Chemical Analysis of Steel - Order of Listing Elements First Edition
ISO
ISO
ISO
TR 6371
6622-2
6627
ISO
ISO
TR 6741-4
TR 7003
Information Processing - Interchange Practices and Test Methods for Unrecorded Instrumentation Magnetic Tape First Edition
Internal combustion engines Piston rings Part 2: Rectangular rings made of steel First Edition; Replaces ISO TR 6622-2
Internal Combustion Engines - Piston Rings - Expander/Segment Oil-Control Rings First Edition
Textiles - Fibres and Yarns - Determination of Commercial Mass of Consignments - Part 4: Values Used for the Commercial
Allowances and the Commercial Moisture Regains First Edition
Unified Format for the Designation of Metals First Edition
ISO
TR 7066-1
Assesment of Uncertainty in Calibration and Use of Flow Measurement Devices - Part 1: Linear Calibration Relationships First Edition
ISO
ISO
ISO
ISO
TR 7073
TR 7074
TR 7178
TR 7239
ISO
ISO
ISO
ISO
ISO
ISO
TR 7240-14
TR 7242
TR 7248
TR 7468
TR 7469
TR 7470
ISO
ISO
TR 7553
TR 7620
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TR 7621
TR 7705
TR 7849
TR 7861
TR 7871
TR 7882
TR 7955
TR 8059
TR 8091
Fertilizers - Sampling - Minimum Mass of Increment to Be Taken to Be Representative of the Total Sampling Unit First Edition
Rubber materials - Chemical resistance Second edition
Rubber or Plastics Covered Rollers - Enquiries and Orders - Recommendations for Technical Information to Be Supplied by
Purchaser First Edition
Guidelines for Specifying Charpy V-Notch Impact Prescriptions in Steel Specifications Second Edition
Acoustics - Estimation of Airborne Noise Emitted by Machinery Using Vibration Measurement First Edition
Road vehicles Injury risk curves for evaluation of occupant protection in frontal impact First Edition
Cumulative Sum Charts - Guidance on Quality Control and Data Analysis Using CUSUM Techniques First Edition
Road Vehicles - Brake Linings - Determination of Thermal Conductivity by Guarded Hot-Plate Apparatus First Edition
Ferroniobium - Determination of Niobium Content - Gravimetric Method First Edition
Irrigation Equipment - Automatic Irrigation Systems - Hydraulic Control First Edition
Textiles - Twist Factor Related to the Tex System First Edition
ISO
TR 8125
Anodizing of Aluminium and Its Alloys - Determination of Colour and Colour Difference of Coloured Anodic Coatings First Edition
Recommended Techniques for the Installation of Unplasticized Poly(Vinyl Chloride) (PVC-U) Buried Drains and Sewers First Edition
Performance Requirements for Plastics Pipes and Fittings for Use in Underground Drainage and Sewage First Edition
Liquid Flow Measurement in Open Channels - Velocity-Area Methods - Investigation of Total Error First Edition
Development and Principles for Application of Public Information Symbols First Edition; (PNS 1083: 1992)
Fire detection and alarm systems Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection
and fire alarm systems in and around buildings First Edition
Chemical Analysis of Light Metals and Their Alloys - Statistical Interpretation of Inter-Laboratory Trials First Edition
Fire Data - Collection and Presentation System First Edition
Summary of Average Stress Rupture Properties of Wrought Steels for Boilers and Pressure Vessels First Edition
Dimensional Stability of Hardboard First Edition
Valve Outlets for Gas Cylinders - List of Provisions Which Are Either Standardized or in Use Second Edition
ISO
ISO
ISO
TR 8266
TR 8281-1
TR 8354
ISO
ISO
ISO
ISO
TR 8357
TR 8363
TR 8389
TR 8390
ISO
TR 8393
ISO
ISO
TR 8435
TR 8517
ISO
TR 8550-1
ISO
TR 8550-3
ISO
ISO
ISO
ISO
ISO
TR 8610
TR 8646
TR 8647
TR 8725
TR 8726
ISO
ISO
ISO
TR 8802-1
TR 8865
TR 8942
ISO
TR 9007
ISO
TR 9122-2
ISO
ISO
ISO
TR 9122-4
TR 9122-5
TR 9126-2
Guidelines for the Presentation of International Standards Dealing with the Design of Structures First Edition
Packaging - Estimating the Filled Volume Using the Flat Dimensions - Part 1: Paper Sacks First Edition
Rubber Hoses and Hose Assemblies for Underground Mining - Textile-Reinforced Air and Water Type First Edition
Road Vehicles - Instructions for the Implementation of the Assignment of World Manufacturer Identifier (WMI) Codes for Vehicle
Identification Number (VIN) Systems and for World Parts Manufacturer Identifier (WPMI) Codes First Edition
Measurement of Liquid Flow in Open Channels - General Guidelines for Selection of Method First Edition
Building Construction - Modular Coordination - System of Preferred Numbers Defining Multimodular Sizes First Edition
Building Construction - Modular Coordination - Application of Horizontal Multimodules First Edition
Documentation - ISO Bibliographic Filing Rules (International Standard Bibliographic Filing Rules) - Exemplification of Bibliographic
Filing Principles in a Model Set of Rules First Edition
Continuous Mechanical Handling Equipment - Safety Code for Belt Conveyors - Examples for Protection of Pinch Points on Idlers
First Edition
Rubber- or Plastics-Covered Rollers - Glossary First Edition
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots ù Part 1: Acceptance
sampling First Edition [Cancelled: ISO TR 8550] [Superseded: ISO TR 8550]
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots ù Part 3: Sampling by
variables First Edition [Superseded: ISO TR 8550]
Light Gauge Metal Containers - Round Vent-Hole Cans with Soldered Ends for Milk and Milk Products - Capacities and Related
Diameters First Edition
Explanatory Notes on ISO 281/1-1977 First Edition
Environmental Degradation of Textiles Used in Air Cargo Restraint Equipment First Edition
Road Vehicles - Transient Open-Loop Response Test Method with One Period of Sinusoidal Input First Edition
Road Vehicles - Transient Open-Loop Response Test Method with Pseudo-Random Steering Input First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks Specific Requirements - Part 1: Overview of Local Area Network Standards Third Edition; Corrected and Reprinted
Mining - Guidance on Methods of Verifying Dimensions of Sprocket Assemblies for Chain Conveyors First Edition
Rubber Compounding Ingredients - Carbon Black - Determination of Individual Pellet Crushing Strength First Edition
Information Processing Systems - Concepts and Terminology for the Conceptual Scheme and the Information Base First Edition
Toxicity Testing of Fire Effluents - Part 2: Guidelines for Biological Assays to Determine the Acute Inhalation Toxicity of Fire Effluents
(Basic Principles, Criteria and Methodology) First Edition
Toxicity Testing of Fire Effluents - Part 4: the Fire Model (Furnaces and Combustion Apparatus Used in Small-Scale Testing) First
Edition
Toxicity Testing of Fire Effluents - Part 5: Prediction of Toxic Effects of Fire Effluents First Edition
Software Engineering - Product Quality - Part 2: External Metrics First Edition
ISO
ISO
ISO
TR 9126-3
TR 9126-4
TR 9165
ISO
ISO
TR 9172
TR 9209
ISO
ISO
ISO
ISO
ISO
TR 9210
TR 9212
TR 9240
TR 9272
TR 9294
ISO
TR 9310
ISO
TR 9325
ISO
TR 9326
ISO
ISO
TR 9372
TR 9464
ISO
ISO
ISO
ISO
ISO
TR 9494
TR 9511
TR 9527
TR 9544
TR 9547
ISO
ISO
TR 9564-4
TR 9573
ISO
TR 9573-11
ISO
TR 9573-13
Software Engineering - Product Quality - Part 3: Internal Metrics First Edition
Software engineering Product quality Part 4: Quality in use metrics First Edition
Practical Thermal Properties of Building Materials and Products First Edition
Continuous Mechanical Handling Equipment - Safety Code for Screw Conveyors - Examples of Guards for Trapping and Shearing
Points First Edition
Measurement of Liquid Flow in Open Channels - Determination of the Wetline Correction First Edition
Measurement of Liquid Flow in Open Channels - Measurement in Meandering Rivers and in Streams with Unstable Boundaries First
Edition
Hydrometry Measurement of liquid flow in open channels Methods of measurement of bedload discharge Second Edition
Textiles - Design of Apparel for Reduced Fire Hazard First Edition
Rubber and rubber products Determination of precision for test method standards Second edition
Information Technology - Guidelines for the Management of Software Documentation Second Edition
Road Vehicles - Smoke Measurement of Compression-Ignition (Diesel) Engines - Survey of Short In-Service Tests First Edition (PNS
1161:1993)
Implants for Surgery - Partial and Total Hip Joint Prostheses - Recommendations for Simulators for Evaluation of Hip Joint
Prostheses First Edition
Implants for Surgery - Partial and Total Hip Joint Prostheses - Guidance for Laboratory Evaluation of Change of Form of Bearing
Surfaces First Edition
Plastics - Basic Materials for Polyurethanes - Determination of the Amounts of 2,4- and 2,6-Isomers in Toluenediisocyanate by
Infrared Spectroscopy First Edition
Guidelines for the Use of ISO 5167-1: 1991 First Edition
Petroleum Liquids - Automatic Pipeline Sampling - Statistical Assessment of Performance of Automatic Samplers Determining the
Water Content in Hydrocarbon Liquids First Edition
Road Vehicles - Driver Hand-Control Reach - In-Vehicle Checking Procedure First Edition
Building Construction - Needs of Disabled People in Buildings - Design Guidelines First Edition
Information Processing - Computer-Assisted Publishing - Vocabulary First Edition
Programming language processors - Test methods - Guidelines for their development and acceptability
Banking Personal Identification Number (PIN) management and security Part 4: Guidelines for PIN handling in open networks First
Edition
Information Processing - SGML Support Facilities - Techniques for Using SGML First Edition
Information processing -- SGML support facilities -- Part 11: Structure descriptions and style specifications for standards document
interchange Second Edition; CD Rom - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide
Information Technology - SGML Support Facilities - Techniques for Using SGML - Part 13: Public Entity Sets for Mathematics and
Science First Edition
ISO
ISO
ISO
ISO
TR 9575
TR 9577
TR 9578
TR 9586
ISO
ISO
ISO
TR 9705-2
TR 9721
TR 9769
ISO
TR 9789
ISO
ISO
ISO
TR 9790
TR 9819
TR 9823
ISO
ISO
ISO
TR 9824
TR 9901
TR 9953
ISO
TR 10000-1
ISO
TR 10000-2
ISO
ISO
ISO
TR 10000-3
TR 10013
TR 10017
ISO
TR 10021-11
ISO
ISO
ISO
TR 10029
TR 10032
TR 10034
ISO
TR 10037
Information Technology - Telecommunications and Information Exchange between Systems - OSI Routeing Framework Second
Edition; NZS/ISO/IEC TR 9575: 1990
Information Technology - Protocol Identification in the Network Layer Fourth Edition
Information Technology - Communication Interface Connectors Used in Local Area Networks First Edition
Implants for Surgery - Usage of the TermsValgus" and"Varus" in Orthopaedic Surgery First Edition"
Reaction-to-Fire Tests - Full-Scale Room Tests for Surface Products - Part 2: Technical Background and Guidance First Edition
Nickel and Nickel Alloys - Rules for Material Description Based on Chemical Symbols First Edition
Steel and Iron - Review of Available Methods of Analysis Third Edition
Information Technology - Guidelines for the Organization and Representation of Data Elements for Data Interchange - Coding
Methods and Principles First Edition
Road Vehicles - Anthropomorphic Side Impact Dummy - Lateral Impact Response Requirements to Assess the Biofidelity of the
Dummy First Edition
Road Vehicles - Comparison Tables of Regulations on Photometric Requirements of Light Signalling Devices First Edition
Liquid Flow Measurement in Open Channels - Velocity-Area Method Using a Restricted Number of Verticals First Edition
Hydrometry ù Measurement of free surface flow in closed conduits First Edition [Superseded: ISO TR 9824-1, ISO TR 9824-2]
Solar Energy - Field Pyranometers - Recommended Practice for Use First Edition
Earth-Moving Machinery - Warning Devices for Slow-Moving Machines - Ultrasonic and Other Systems
Information Technology - Framework and Taxonomy of International Standardized Profiles - Part 1: General Principles and
Documentation Framework Fourth Edition
Information Technology - Framework and Taxonomy of International Standardized Profiles - Part 2: Principles and Taxonomy for OSI
Profiles Fifth Edition
Information Technology - Framework and Taxonomy of International Standardized Profiles - Part 3: Principles and Taxonomy for
Open System Environment Profiles Second Edition
Guidelines for Quality Management System Documentation First Edition
Guidance on statistical techniques for ISO 9001:2000 Second Edition
Information Technology - Message Handling Systems (MHS): MHS Routing - Guide for Messaging Systems Managers First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Operation of an X.25 Interworking Unit
First Edition; NZS/ISO/IEC TR10029: 1989; AS 4015: 1992
Information technology Reference Model of Data Management First Edition
Guidelines for the Preparation of Conformity Clauses in Programming Language Standards First Edition
Information Technology - SGML and Text-Entry Systems - Guidelines for SGML Syntax-Directed Editing Systems First Edition
(AS/NZS 4110: 1993)
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Cylindrical gears Code of inspection practice Part 1: Inspection of corresponding flanks of gear teeth First Edition; Corrigendum 1:
08/01/2006
Cylindrical gears Code of inspection practice Part 2: Inspection related to radial composite deviations, runout, tooth thickness and
TR 10064-2
backlash First Edition; Technical Corrigendum 1: 04-15-2001; Technical Corrigendum 2: 08/01/2006
Cylindrical gears Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism
TR 10064-3
of axes First Edition; Technical Corrigendum 1: 08/01/2006
Cylindrical gears Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern
TR 10064-4
checking First Edition; Technical Corrigendum 1: 08/01/2006
TR 10064-5 CORR Cylindrical gears ù Code of inspection practice ù Part 5: Recommendations relative to evaluation of gear measuring instruments
1
TECHNICAL CORRIGENDUM 1 First Edition
Cylindrical gears ù Code of inspection practice ù Part 5: Recommendations relative to evaluation of gear measuring instruments First
TR 10064-5
Edition
TR 10091
Information Technology - Technical Aspects of 130 mm Optical Disk Cartridge Write-Once Recording Format First Edition
TR 10108
Steel - Conversion of Hardness Values to Tensile Strength Values First Edition
TR 10158
Principles and Rationale Underlying Calculation Methods in Relation to Fire Resistance of Structural Elements First Edition
Information Technology - Telecommunications and Information Exchange Between Systems - List of Standard Data Layer Link
Protocols that Utilize High-Level Data Link Control (HDLC) Classes of Procedures, List of Standard XID Format Identifiers, List of
Standard Mode-Setting Information Field Format Identifiers, and List of Standard User-Defined Parameter Set Identification Values
Second Edition
TR 10171
Information Technology - Telecommunications and Information Exchange Between Systems - Network/Transport Protocol
TR 10172
Interworking Specification First Edition; AS/NZS 4104: 1993
TR 10176
Information Technology - Guidelines for the Preparation of Programming Language Standards Fourth Edition
Information Technology - Programming Languages, Their Environments and System Software Interfaces - Guidelines for Language
TR 10182
Bindings First Edition
Information Technology - Text and Office Systems - Office Document Architecture (ODA) and Interchange Format - Technical Report
TR 10183-1
on ISO 8613 Implementation Testing - Part 1: Testing Methodology First Edition
Information Technology - Text and Office Systems - Office Document Architecture (ODA) and Interchange Format - Technical Report
TR 10183-2
on ISO 8613 Implementation Testing - Part 2: Framework for Abstract Test Cases First Edition
TR 10192-2
Information Technology - Home Electronic System (HES) Interfaces - Part 2: Simple Interface Type 1 First Edition
TR 10194
Non-Round General Use Light Gauge Metal Containers - Nominal Filling Volumes and Nominal Cross-Sections First Edition
TR 10201
Aerospace - Standards for Electronic Instruments and Systems Fourth Edition
TR 10217
Solar Energy - Water Heating Systems - Guide to Material Selection with Regard to Internal Corrosion First Edition
General-Purpose Flat Pallets for Through Transit of Goods - Design Rating and Maximum Working Load First Edition; Corrigendum
TR 10232
1: 1992
TR 10233
General-Purpose Flat Pallets for Through Transit of Goods - Performance Requirements First Edition
TR 10064-1
ISO
TR 10303-12
ISO
TR 10303-307
ISO
TR 10305-1
ISO
TR 10305-2
ISO
TR 10314-1
ISO
TR 10314-2
ISO
TR 10358
ISO
TR 10450
ISO
TR 10465-2
ISO
ISO
ISO
TR 10465-3
TR 10476
TR 10488
ISO
ISO
ISO
ISO
ISO
ISO
TR 10495
TR 10501
TR 10593
TR 10603
TR 10652
TR 10657
ISO
TR 10719
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 12: Description Methods: The
EXPRESS-I Language Reference Manual First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 307: Abstract Test Suite: Sheet
Metal Die Planning and Design First Edition
Road vehicles Calibration of electromagnetic field strength measuring devices Part 1: Devices for measurement of electromagnetic
fields at frequencies> 0 Hz First Edition
Road vehicles Calibration of electromagnetic field strength measuring devices Part 2: IEEE standard for calibration of
electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz First Edition
Industrial Automation - Shop Floor Production - Part 1: Reference Model for Standardization and a Methodology for Identification of
Requirements First Edition
Industrial Automation - Shop Floor Production - Part 2: Application of the Reference Model for Standardization and Methodology First
Edition
Plastics Pipes and Fittings - Combined Chemical-Resistance Classification Table First Edition; [Cancelled: UNI UNI ISO/TR
7471:1983, UNI UNI ISO/TR 7472:1983, UNI UNI ISO/TR 7473:1983, UNI UNI ISO/TR 7474:1983]
Industrial Automation Systems and Integration - Operating Conditions for Discrete Part Manufacturing - Equipment in Industrial
Environments First Edition
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) ù Part 2: Comparison of
static calculation methods Second Edition
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) ù Part 3: Installation
parameters and application limits Second Edition
Doorsets - Assessment of Burglar-Proofness First Edition
Graphical Symbols Incorporating Arrows - Synopsis First Edition
Cylindrical Gears - Calculation of Service life Under Variable Load - Conditions for Cylindrical Gears in Accordance with ISO 6336
First Edition
Thermoplastics Pipes for the Transport of Liquids Under Pressure - Calculation of Head Losses First Edition
Micrographics - Use of Microfilm Jackets First Edition
Road Vehicles - Legal Situation Concerning Lighting and Light- Signalling Devices First Edition
Standard Sizing Systems for Clothes First Edition
Explanatory Notes on ISO 76 First Edition
Steel and Iron - Determination of Non-Combined Carbon Content - Infrared Absorption Method After Combustion in an Induction
Furnace First Edition
ISO
ISO
ISO
TR 10730
TR 10828
TR 10837
Information Technology - Open Systems Interconnection - Tutorial on Naming and Addressing First Edition; SAA/SNZ HB68: 1995
Worms Gears - Geometry of Worm Profiles First Edition; Technical Corrigendum 1: 11/01/1998
Determination of the Thermal Stability of Polyethylene (PE) for Use in Gas Pipes and Fittings First Edition
ISO
TR 10949
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TR 10982
TR 11017
TR 11018
TR 11065
TR 11069
TR 11071-1
TR 11071-2
TR 11079
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Hydraulic Fluid Power - Component Cleanliness - Guidelines for Achieving and Controlling Cleanliness of Components from
Manufacture to Installation Second Edition
Road Vehicles - Test Procedures for Evaluating Out-Of-Position Vehicle Occupant Interactions with Deploying Air Bags First Edition
Information Technology - Framework for Internationalization First Edition
Essential Oils - General Guidance on the Determination of Flashpoint First Edition
Industrial Automation Glossary First Edition
Aluminium Structures - Material and Design - Ultimate Limit State under Static Loading First Edition; Corrigendum 1: 1996
Comparison of worldwide lift safety standards Part 1: Electric lifts (elevators) Second Edition
Comparison of worldwide lift safety standards Part 2: Hydraulic lifts (elevators) Second Edition
Evaluation of Cold Environments - Determination of Required Clothing Insulation (IREQ) First Edition
Lasers and laser-related equipment ù Test methods for laser beam widths, divergence angles and beam propagation ratios ù Part 3:
TR 11146-3 CORR Intrinsic and geometrical laser beam classification, propagation and details of test methods TECHNICAL CORRIGENDUM 1 First
Edition
1
Lasers and laser-related equipment ù Test methods for laser beam widths, divergence angles and beam propagation ratios ù Part 3:
TR 11146-3
Intrinsic and geometrical laser beam classification, propagation and details of test methods First Edition
TR 11172-5 CORR Information technology ù Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s ù Part 5:
1
Software simulation TECHNICAL CORRIGENDUM 1 First Edition
Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part
TR 11172-5
5: Software Simulation First Edition
TR 11175
Dental Implants - Guidelines for Developing Dental Implants First Edition
TR 11211
Grading Polished Diamonds - Terminology and Classification First Edition
TR 11295
Techniques for Rehabilitation of Pipeline Systems by the Use of Plastics Pipes and Fittings First Edition
ISO
ISO
ISO
TR 11328
TR 11330
TR 11332
Measurement of Liquid Flow in Open Channels - Equipment for the Measurement of Discharge Under Ice Conditions First Edition
Determination of Volume of Water and Water Level in Lakes and Reservoirs First Edition
Hydrometric Determinations - Unstable Channels and Ephemeral Streams First Edition
ISO
ISO
ISO
ISO
ISO
TR 11340
TS 11405
TR 11422
TR 11434
TR 11444
ISO
TR 11548-1
Rubber and Rubber Products - Hydraulic Hose Assemblies - External Leakage Classification for Hydraulic Systems First Edition
Dental Materials - Testing of Adhesion to Tooth Structure Second Edition
Iron Ores - Recommended Procedures for Iron Ore Dissolution Using Either Acid Digestion or Alkali Fusion First Edition
Nickel Alloys - Determination of Niobium and Tantalum - Ion Exchange Method First Edition
Quality of Sawn Wood Used for the Construction of Pallets First Edition
Communication Aids for Blind Persons - Identifiers, Names and Assignation to Coded Character Sets for 8-Dot Braille Characters Part 1: General Guidelines for Braille Identifiers and Shift Marks First Edition
ISO
TR 11548-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TR 11552
TR 11580
TR 11589
TR 11590
TR 11610
TR 11627
TR 11637
TR 11647
TR 11656
TR 11688-1
ISO
TR 11688-2
ISO
TR 11690-3
ISO
ISO
TR 11696-1
TR 11696-2
ISO
ISO
TR 11728
TR 11761
ISO
ISO
TR 11762
TR 11776
ISO
TR 11802-1
ISO
TR 11802-2
ISO
ISO
TR 11802-5
TR 11842
Communication Aids for Blind Persons - Identifiers, Names and Assignation to Coded Character Sets for 8-Dot Braille Characters Part 2: Latin Alphabet Based Character Sets First Edition
Lasers and Laser-Related Equipment - Laser Materials-Processing Machines - Performance Specifications and Benchmarks for
Cutting of Metals First Edition
Information technology ù Framework for describing user interface objects, actions and attributes First Edition
Information Technology - Open Systems Interconnection - LOTOS Description of the CCR Service First Edition
Information Technology - Open Systems Interconnection - LOTOS Description of the CCR Protocol First Edition
Protective clothing Vocabulary VÛtements de protection Vocabulaire First Edition
Measurement of Liquid Flow in Open Channels - Computing Stream Flow Using an Unsteady Flow Model First Edition
Boron Treated Engineering Steels for Quenching and Tempering First Edition
Fusion Compatibility of Polyethylene (PE) Pipes and Fittings First Edition
Measurement of Liquid Flow in Open Channels - Mixing Length of a Tracer First Edition
Acoustics - Recommended Practice for the Design of Low-Noise Machinery and Equipment - Part 1: Planning First Edition
Acoustics - Recommended Practice for the Design of Low-Noise Machinery and Equipment - Part 2: Introduction to the Physics of
Low-Noise Design First Edition
Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 3: Sound Propagation and
Noise Prediction in Workrooms First Edition
Uses of Reaction to Fire Test Results - Part 1: Application of Test Results to Predict Fire Performance of Internal Linings and Other
Building Products First Edition
Uses of Reaction to Fire Test Results - Part 2: Fire Hazard Assessment of Construction Products First Edition
Anodized Aluminium and Aluminium Alloys - Accelerated Test of Weather Fastness of Coloured Anodic Oxide Coatings Using Cyclic
Artificial Light and Pollution Gas First Edition
Light-Gauge Metal Containers - Round Open-Top Cans - Classification of Can Sizes by Construction Type First Edition;
Light-Gauge Metal Containers - Round Open-Top Cans for Liquid Products with Added Gas - Classification of Can Sizes by
Construction Type First Edition;
Light Gauge Metal Containers - Non-Round Open-Top Cans - Cans Defined by Their Nominal Capacities First Edition;
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks
Technical reports and guidelines Part 1: The structure and coding of Logical Link Control addresses in Local Area Networks Fourth
Edition
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks
Technical reports and guidelines Part 2: Standard Group MAC Addresses Sixth Edition
Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks Technical Reports and Guidelines - Part 5: Media Access Control (MAC) Bridging of Ethernet V2.0 in Local Area Networks First
Edition; ANSI/IEEE Std 802.1H
Road Vehicles - Comparison of Statutory Photometric Requirements in Various Countries for Lighting Devices First Edition
Water Quality - Determination of Nitrogen - Part 2: Determination of Bound Nitrogen, After Combustion and Oxidation to Nitrogen
Dioxide, Using Chemiluminescence Detection First Edition
Reaction to Fire Tests - Ignitability of Building Products Subjected to Direct Impingement of Flame - Part 1: Guidance on Ignitability
First Edition
Information and Documentation - Transliteration of Korean Script into Latin Characters First Edition
Iron Ores - Currently Traded International Ores First Edition
Guidance on Airway Management During Laser Surgery of Upper Airway First Edition
Micrographics - Inspection of Silver-Gelatin Microforms for Evidence of Deterioration First Edition
Micrographics - Expungement, Deletion, Correction or Amendment of Records on Microforms First Edition
ISO
TR 11905-2
ISO
ISO
ISO
ISO
ISO
ISO
TR 11925-1
TR 11941
TR 11945
TR 11991
TR 12031
TR 12036
ISO
TR 12037
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TR 12075
TR 12155
TR 12182
TR 12198
TR 12343
TR 12349-1
TR 12349-2
TR 12350
TR 12351
TR 12369
TR 12382
Electronic Imaging - Recommendations for the Expungement of Information Recorded on Write-Once Optical Media First Edition
Information Technology - Customer Premises Cabling - Planning and Installation Guide to Support ISO/IEC 8802-5 Token Ring
Stations First Edition
Commercial Vehicles - Obstacle Detection Device During Reversing - Requirements and Tests First Edition
Information Technology - Categorization of Software First Edition
Aerospace - Rivets, Solid - Materials Aeronautique Et Espace - Rivets Ordinaires - Materiaux First Edition
Road Vehicles - Symbols for Electrotechnical Diagrams First Edition
Road Vehicles - Dummies for Restraint System Testing - Part 1: Adult Dummies First Edition
Road Vehicles - Dummies for Restraint System Testing - Part 2: Chid Dummies First Edition
Road vehicles Injury risk curves for evaluation of occupant protection in side impact First Edition
Road Vehicles - Determination of Head Contact and Duration in Impact Tests First Edition
Agricultural Tractors and Machinery - Electrical Power Transmission Connector First Edition; Amendment 1: 12-01-1999
Permuted Index of the Vocabulary of Information Technology Second Edition
ISO
TR 12391-1
Gas Cylinders - Refillable Seamless Steel - Performance Tests - Part 1: Philosophy, Background and Conclusions First Edition
ISO
TR 12391-2
Gas cylinders Refillable seamless steel Performance tests Part 2: Fracture performance tests Monotonic burst tests First Edition
ISO
ISO
ISO
TR 12391-3
TR 12391-4
TR 12470
ISO
ISO
TR 12471
TR 12603
ISO
TR 12654
Gas cylinders Refillable seamless steel Performance tests Part 3: Fracture performance tests Cyclical burst tests First Edition
Gas cylinders Refillable seamless steel Performance tests Part 4: Flawed-cylinder cycle test First Edition
Fire Resistance Tests - Guidance on the Application and Extension of Results First Edition
Computational structural fire design Review of calculation models, fire tests for determining input material data and needs for further
development First Edition
Building Construction Machinery and Equipment - Classification First Edition
Electronic Imaging - Recommendations for the Management of Electronic Recording Systems for the Recording of Documents that
May Be Required as Evidence, on WORM Optical Disk First Edition
ISO
TR 12662
ISO
TR 12735-2
ISO
TR 12764
ISO
ISO
TR 12767
TR 12776
Certification Scheme for Prestressing Steels First Edition
Mechanical Testing of Metals - Symbols Used with Their Definitions - Part 2: Recommendations for the Development of Symbols and
Definitions First Edition
Measurement of Fluid Flow in Closed Conduits - Flowrate Measurement by Means of Vortex Shedding Flowmeters Inserted in
Circular Cross-Section Conduits Running Full First Edition
Measurement of fluid flow by means of pressure differential devices ù Guidelines on the effect of departure from the specifications
and operating conditions given in ISO 5167 Second Edition
Pallets - Slip Sheets First Edition
ISO
ISO
TR 12960
TR 13214
Geotextiles and Geotextile-Related Products - Screening Test Method for Determining the Resistance to Liquids First Edition
Road Vehicles - Child Restraint Systems - Compilation of Regulations and Standards First Edition
ISO
TR 13219
ISO
ISO
TR 13233
TR 13243
ISO
ISO
TR 13283
TR 13298
ISO
TR 13309
ISO
ISO
TR 13335-3
TR 13335-4
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TR 13335-5
TR 13352
TR 13387-1
TR 13387-2
TR 13387-3
TR 13387-4
TR 13387-5
TR 13387-6
TR 13387-7
TR 13387-8
TR 13425
Road Vehicles - Risk of Thoracic Injury Associated with Hybrid III Sternal Deflection Due to Shoulder Belt Loading First Edition
Information Technology - Interpretation of Accreditation Requirements in ISO/IEC Guide 25 - Accreditation of Information Technology
and Telecommunications Testing Laboratories for Software and Protocol Testing Services First Edition
Information Technology - Quality of Service - Guide to Methods and Mechanisms First Edition
Industrial Automation - Time-Critical Communications Architectures - User Requirements and Network Management for Time-Critical
Communications Systems First Edition
Ships and Marine Technology - Vocabulary of General Terms First Edition
Manipulating Industrial Robots - Informative Guide on Test Equipment and Metrology Methods of Operation for Robot Performance
Evaluation in Accordance with ISO 9283 First Edition
Information Technology - Guidelines for the Management of IT Security - Part 3: Techniques for the Management of IT Security First
Edition
Information Technology - Guidelines for the Management of IT Security - Part 4: Selection of Safeguards First Edition
Information Technology - Guidelines for the Management of IT Security - Part 5: Management uidance on Network Security First
Edition
Guidelines for Interpretation of ISO 9000 Series for Application within the Iron Ore Industry First Edition
Fire Safety Engineering - Part 1: Application of Fire Performance Concepts to Design Objectives First Edition
Fire Safety Engineering - Part 2: Design Fire Scenarios and Design Fires First Edition
Fire Safety Engineering - Part 3: Assessment and Verification of Mathematical Fire Models First Edition
Fire Safety Engineering - Part 4: Initiation and Development of Fire and Generation of Fire Effluents First Edition
Fire Safety Engineering - Part 5: Movement of Fire Effluents First Edition
Fire Safety Engineering - Part 6: Structural Response and Fire Spread Beyond the Enclosure of Origin First Edition
Fire Safety Engineering - Part 7: Detection, Activation and Suppression First Edition
Fire Safety Engineering - Part 8: Life Safety - Occupant Behaviour, Location and Condition First Edition
Guidelines for the selection of statistical methods in standardization and specification Third Edition
ISO
ISO
ISO
TR 13434
TR 13487
TR 13530
Geotextiles and Geotextile-Related Products - Guidelines on Durability First Edition
Braking of Road Vehicles - Considerations on the Definition of Mean Fully Developed Deceleration First Edition
Water Quality - Guide to Analytical Quality Control for Water Analysis First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Protocol Combinations to Provide and
Support the OSI Network Service First Edition
Information Technology - Guidelines for Effective Use of Optical Disk Cartridges Conforming to ISO/IEC 10090 First Edition
Technical Product Documentation - Organization and Naming of Layers for CAD - Part 3: Application of ISO 13567-1 and ISO 135672 First Edition
Financial services Information security guidelines Third Edition
ISO
ISO
TR 13532
TR 13561
ISO
ISO
TR 13567-3
TR 13569
ISO
ISO
ISO
ISO
ISO
ISO
TR 13570-1
TR 13593
TR 13594
TR 13668
TR 13739
TR 13763
ISO
ISO
ISO
TR 13818-5
TR 13841
TR 13843
ISO
TR 13849-100
Wheelchairs Part 1: Guidelines for the application of the ISO 7176 series on wheelchairs First Edition: Replaces ISO TR 13570:2001
Enclosed gear drives for industrial applications First Edition; Technical Corrigendum: 12/15/2005
Information Technology - Lower Layers Security First Edition
Digital Coding of Oral Health and Care First Edition
Petroleum Products - Methods for Specifying Practical Procedures for the Transfer of Bunker Fuels to Ships First Edition
Safety and Performance Criteria for Seamless Gas Cylinders First Edition; Corrigendum 1: 1996
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information - Part 5: Software Simulation Second
Edition
Information Technology - Guidance on Measurement Techniques for 90 mm Optical Disk Cartridges First Edition
Water Quality - Guidance on Validation of Microbiological Methods First Edition
Safety of Machinery - Safety-Related Parts of Control Systems - Part 100: Guidelines for the Use and Application of ISO 13849-1
First Edition
ISO
ISO
TR 13881
TR 13883
Petroleum and Natural Gas Industries - Classification and Conformity Assessment of Products, Processes and Services First Edition
Plastics - Guide to the Writing of Test Methods First Edition
ISO
TR 13989-1
Calculation of Scuffing Load Capacity of Cylindrical, Bevel and Hypoid Gears - Part 1: Flash Temperature Method Fisrt Edition
ISO
ISO
ISO
TR 13989-2
TR 14032
TR 14047
ISO
TR 14049
ISO
ISO
TR 14061
TR 14062
Calculation of Scuffing Load Capacity of Cylindrical, Bevel and Hypoid Gears - Part 2: Integral Temperature Method First Edition
Environmental Management - Examples of Environmental Performance Evaluation (EPE) First Edition
Environmental management Life cycle impact assessment Examples of application of ISO 14042 First Edition
Environmental Management - Life Cycle Assessment - Examples of Application of ISO 14041 to Goal and Scope Definition and
Inventory Analysis First Edition
Information to Assist Forestry Organizations in the Use of Environmental Management System Standards ISO 14001 and ISO 14004
First Edition
Environmental Management - Integrated Environmental Aspects into Product Design and Development First Edition
Electronic Imaging - Human and Organizational Issues for Successful Electronic Image Management (EIM) Implementation First
Edition
Information Technology - Software Measurement - Functional Size Measurement - Part 3: Verification of Functional Size
Measurement Methods First Edition
Information Technology - Software Measurement - Functional Size Measurement - Part 4: Reference Model First Edition
Information technology Software measurement Functional size measurement Part 5: Determination of functional domains for use
with functional size measurement First Edition
Information technology Software measurement Functional size measurement Part 6: Guide for use of ISO/IEC 14143 series and
related International Standards First Edition
Information technology û Fibre channel û Part 117: Methodologies for jitter and signal quality (MJSQ) First Edition
Classification of Information in the Construction Industry First Edition
Gears - Part 1: Thermal Rating First Edition
Gears - Thermal Capacity Part 2: Thermal Load-Carrying Capacity First Edition
Implants for surgery Fundamental principles Second Edition
Sintered Metal Materials, Excluding Hardmetals - Metallographic Preparation and Examination First Edition
Information Technology - Programming Languages, Their Environments and System Software Interfaces - Guidelines for the
Preparation of Language-Independent Service Specifications (LISS) First Edition
Information Technology - Software Engineering - Guidelines for the Adoption of CASE Tools First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Architecture and Scenarios for Private Integrated Services Networking Second Edition
Information technology Coding of audio-visual objects Part 7: Optimized reference software for coding of audio-visual objects
Second Edition
Information technology Coding of audio-visual objects Part 9: Reference hardware description First Edition
Textiles - Industrial Laundering Procedures for Textile Rental and Industrial Laundering First Edition
ISO
TR 14105
ISO
ISO
TR 14143-3
TR 14143-4
ISO
TR 14143-5
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TR 14143-6
TR 14165-117
TR 14177
TR 14179-1
TR 14179-2
TR 14283
TR 14321
ISO
ISO
TR 14369
TR 14471
ISO
TR 14475
ISO
ISO
ISO
TR 14496-7
TR 14496-9
TR 14510
ISO
TR 14516
ISO
ISO
ISO
ISO
TR 14543-4
TR 14564
TR 14569-1
TR 14600
Information Technology - Security Techiques - Guidelines for the Use and Management of Trusted Third Party Services First Edition
Information Technology - Home Eectronic System (HES) Architecture - Part 4: Home and Building Automation in a Mixed-Use
Building First Edition
Shipbuilding and Marine Structures - Marking of Escape Routes First Edition
Dental materials ù Guidance on testing of wear ù Part 1: Wear by toothbrushing First Edition [Superseded: ISO TS 14569-1]
Gas Cylinders - International Quality Conformance System - Basic Rules First Edition; Corrected and Reprinted 12/01/2000
ISO
ISO
ISO
ISO
TR 14618
TR 14638
TR 14645
TR 14652
Middle Atmosphere - Global Model at Altitudes Between 30 km and 120 km, and Wind Model at Altitudes Above 30 km First Edition
Geometrical Product Specification (GPS) - Masterplan First Edition
Road Vehicles - Test Procedures for Evaluating Child Restraint System Interactions with Deploying Air Bags First Edition
Information technology Specification method for cultural conventions First Edition
ISO
TR 14672
ISO
TR 14685
ISO
TR 14696
ISO
ISO
TR 14759
TR 14762
ISO
ISO
TR 14763-2
TR 14799-1
ISO
TR 14799-2
ISO
TR 14813-2
ISO
TR 14813-3
ISO
TR 14813-4
ISO
TR 14813-5
ISO
ISO
ISO
TR 14813-6
TR 14933
TR 14936
ISO
TR 14969
ISO
TR 14999-1
ISO
TR 14999-2
ISO
TR 14999-3
ISO
ISO
TR 15031-2
TR 15044
Graphic Technology - Statistics of the Natural SCID Images Defined in ISO 12640 First Edition
Hydrometric Determinations - Geophysical Logging of Boreholes for Hydrogeological Purposes - Considerations and Guidelines for
Making Measurements First Edition
Reaction to Fire Tests - Determination of Fire Parameters of Materials, Products and Assemblies Using an Intermediate-Scale Heat
Release Calorimeter (ICAL) First Edition
Software Engineering - Mock up and Prototype - A Categorization of Software Mock up and Prototype Models and Their Use First
Edition
Information Technology - Home Control Systems - Guidelines for Functional Safety First Edition
Information Technology - Implementation and Operation of Customer Premises Cabling - Part 2: Planning and Installation First
Edition
Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison First Edition
Comparison of worldwide escalator and moving walk safety standards Part 2: Abbreviated comparison and comments First Edition
Transport Information and Control Systems - Reference Model Architecture(s) for the TICS Sector - Part 2: Core TICS Reference
Architecture First Edition
Transport Information and Control Systems - Reference Model Architecture(s) for the TICS Sector - Part 3: Example Elaboration First
Edition
Transport Information and Control Systems - Reference Model Architecture(s) for the TICS Sector - Part 4: Reference Model Tutorial
First Edition
Transport Information and Control Systems - Reference Model Architecture(s) for the TICS Sector - Part 5: Requirements for
Architecture Description in TICS Standards First Edition
Transport Information and Control Systems - Reference Model Architecture(s) for the TICS Sector - Part 6: Data Presentation in
ASN.1 First Edition
Road Vechicles - Test Procedure for Evaluating Occupant Interactions with Deploying Side Impact Airbags First Edition
Metallic Materials - Strain Analysis Report First Edition
Medical devices Quality management systems Guidance on the application of ISO 13485:2003 First Edition; Replaces ISO
14969:1999
Optics and photonics Interferometric measurement of optical elements and optical systems Part 1: Terms, definitions and
fundamental relationships First edition
Optics and photonics Interferometric measurement of optical elements and optical systems Part 2: Measurement and evaluation
techniques First edition
Optics and photonics Interferometric measurement of optical elements and optical systems Part 3: Calibration and validation of
interferometric test equipment and measurements First edition
Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 2: Terms, definitions,
abbreviations and acronyms First Edition
Information Technology - Terminology for the Home Electronic System (HES) First Edition
ISO
TR 15067-2
Information Technology - Home Electronic Systems (HES) Application Model - Part 2: Lighting Model for HES First Edition
Information Technology - Home Electronic Systems (HES) Application Model - Part 3: Model of an Energy Management System for
HES First Edition
ISO
TR 15067-3
ISO
ISO
ISO
TR 15067-4
TR 15069
TR 15070 AMD 2
Information Technology - Home Electronic Systems (HES) Application Model - Part 4: Security System for HES First Edition
Series 1 Freight Containers - Handling and Securing - Rationale for ISO 3874 Annex A First Edition
Series 1 freight containers ù Rationale for structural test criteria AMENDMENT 2 First Edition
ISO
ISO
ISO
TR 15070 AMD 1
TR 15070
TR 15155
ISO
ISO
ISO
TR 15235
TR 15271
TR 15285
Series I freight containers - Rationale for structural test criteria AMENDMENT 1 : Guidance on structural integrity First edition
Series 1 freight containers Rationale for structural test criteria First edition
Test facilities for agricultural irrigation equipment First edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Collected Information on the Effect of Levels of
Water-Soluble Salt Contamination First Edition
Information Technology - Guide for ISO/IEC 12207 (Software Life Cycle Processes) First Edition
Information Technology - An Operational Model for Characters and Glyphs First Edition
ISO
ISO
TR 15294
TR 15300
ISO
TR 15349-1
ISO
TR 15349-3
ISO
ISO
ISO
TR 15377
TR 15403-2
TR 15409
ISO
ISO
ISO
TR 15410
TR 15413
TR 15440
ISO
TR 15443-1
Information technology Security techniques A framework for IT security assurance Part 1: Overview and framework First Edition
ISO
TR 15443-2
Information technology Security techniques A framework for IT security assurance Part 2: Assurance methods First Edition
ISO
TR 15446
Information technology Security techniques Guide for the production of Protection Profiles and Security Targets First Edition
Information Technology - Methods for Data Flow Control at Synchronous and Asynchronous DTE-DCE Interfaces First Edition
Dentistry - Application of OSI Clinical Codification to the Classification and Coding of Dental Products First Editon
Unalloyed Steel - Determination of Low Carbon Content - Part 1: Infrared Absorption Method After Combustion in an Electric
Resistance Furnace (By Peak Separation) First Edition
Unalloyed Steel - Determination of Low Carbon Content - Part 3: Infrared Absorption Method After Combustion in an Electric
Resistance Furnace (With Preheating) First Edition
Measurement of fluid flow by means of pressure-differential devices ù Guidelines for the specification of orifice plates, nozzles and
Venturi tubes beyond the scope of ISO 5167 Second edition
Natural gas Natural gas for use as a compressed fuel for vehicles Part 2: Specification of the quality First Edition
Road Vechicles - Heat Rating of Spark Plugs First Edition
Information Technology - Telecommunications and Information Exchange between Systems - PISN Mobility-General Principles and
Services Aspects First Edition
Information Technology - Font Services - Abstract Service Definition First Edition
Information technology Future keyboards and other associated input devices and related entry methods First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TR 15452
TR 15461
TR 15462
TR 15489-2
TR 15497
TR 15580
TR 15581
TR 15599 CORR 1
TR 15599
TR 15608
ISO
TR 15655
Information Technology - Specification of Data Value Domains First Edition
Steel Forgings - Testing Frequency, Sampling Conditions and Test Methods for Mechanical Tests First Edition
Water quality Selection of tests for biodegradability Second Edition
Information and Documentation - Records Management - Part 2: Guidelines First Edition
Road Vehicles - Development Guidelines for Vehicle Based Software First Edition
Information Technology - Programming Languages - Fortran - Floating-Point Exception Handling Second Edition
Information Technology - Programming Languages - Fortran - Enhanced Data Type Facilities Second Edition
Digital codification of dental laboratory procedures TECHNICAL CORRIGENDUM 1 First Edition
Digital Codification of Dental Laboratory Procedures First Edition
Welding - Guidelines for a Metallic Materials Grouping System Second Edition
Fire Resistancve - Tests for Thermo-Physical and Mechanical Properties of Structural Materials at Elevated Temperatures for Fire
Engineering Design First Edition
ISO
TR 15656
Fire resistance Guidelines for evaluating the predictive capability of calculation models for structural fire behaviour First Edition
ISO
ISO
TR 15766
TR 15801
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Road Vehicles - Pedestrian Protection - Targets for the Assessment of the Biofidelity of Pedestrian-Leg Test Devices First Edition
Electronic imaging Information stored electronically Recommendations for trustworthiness and reliability First Edition
Sterilization of Health Care Products - Radiation Sterilization - Selection of Sterilization Dose for a Single Production Batch First
TR 15844
Edition
TR 15855
Copper, Lead and Zinc Sulfide Concentrates - Step-by-Step Procedure for the Testing of Static Scales First Edition
TR 15916
Basic considerations for the safety of hydrogen systems First Edition
TR 15931
Designation system for cast irons and pig irons First Edition
Information technology ù Multimedia content description interface ù Part 8: Extraction and use of MPEG-7 descriptions AMENDMENT
TR 15938-8 AMD 2 2: Extraction and use of MPEG-7 perceptual 3D shape descriptor First Edition
TR 15938-8 CORR Information technology ù Multimedia content description interface ù Part 8: Extraction and use of MPEG-7 descriptions TECHNICAL
1
CORRIGENDUM 1 First Edition
Information technology ù Multimedia content description interface ù Part 8: Extraction and use of MPEG-7 descriptions AMENDMENT
TR 15938-8 AMD 1 1: Extensions of extraction and use of MPEG-7 descriptions First Edition
ISO
ISO
TR 15938-8
TR 15938-11
ISO
ISO
ISO
TR 15942
TR 15947
TR 15969
Information technology ù Multimedia content description interface ù Part 8: Extraction and use of MPEG-7 descriptions First Edition
Information technology - Multimedia content description interface - Part 11: MPEG-7 profile schemas First Edition
Information Technology - Programming Languages - Guide for the Use of the Ada Programming Language in High Integrity Systems
First Edition
Information technology Security techniques IT intrusion detection framework First Edition
Surface Chemical Analysis - Depth Profiling - Measurement of Sputtered Depth First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Geometrical Product Specifications (GPS) - Systematic Errors and Contributions to Measurement Uncertainty of Length
Measurement due to Thermal Influences First Edition
Graphic technology Database architecture model and control parameter coding for process control and workflow (Database AMPAC)
TR 16044
First Edition
TR 16056-1
Health informatics Interoperability of telehealth systems and networks Part 1: Introduction and definitions First Edition
TR 16056-2
Health informatics Interoperability of telehealth systems and networks Part 2: Real-time systems First Edition
TR 16060
Destructive tests on welds in metallic materials Etchants for macroscopic and microscopic examination First Edition
TR 16066
Graphic Technology - Standard Object Colour Spectra Database for Colour Reproduction Evaluation First Edition
Medical devices Guidance on the selection of standards in support of recognized essential principles of safety and performance of
TR 16142
medical devices Second Edition [Superseded By: AAMI TIR16142]
Hydraulic Fluid Power - Calibration of Liquid Automatic Particle Counters - Procedures Used to Certify the Standard Reference
TR 16144
Material SRM 2806 First Edition
Piston-operated volumetric instruments Determination of uncertainty for volume measurements made using the photometric method
TR 16153
First Edition
TR 16323
Textiles Three-dimensional measuring apparatus for fabric appearance First Edition
TR 16326
Software Engineering - Guide for the Application of ISO/IEC 12207 to Project Management First Edition
Road vehicles Ergonomic aspects of in-vehicle presentation for transport information and control systems Warning systems First
TR 16352
Edition
TR 16386
Impact of Changes in ISO Fluid Power Particle Counting - Contamination Control and Filter Test Standards First Edition
Information Technology - Generic Digital Audio-Visual Systems - Technical Report on ISO/IEC 16500 - Description of Digital AudioTR 16501
Visual Functionalities First Edition
Geometrical Product Specifications (GPS) Linear and angular dimensioning and tolerancing: +/- limit specifications Step
TR 16570
dimensions, distances, angular sizes and radii First Edition
Lifts, escalators and passenger conveyors Comparison of worldwide standards on electromagnetic terference/electromagnetic
TR 16764
compatibility First Edition
TR 16765 CORR 1 Comparison of worldwide safety standards on lifts for firefighters TECHNICAL CORRIGENDUM 1 First Edition
TR 16765
Comparison of Worldwide Safety Standards on Lifts for Firefighters First Edition
TR 16806
Pneumatic fluid power Cylinders Load capacity of pneumatic slides and their presentation method First Edition
Cranes Bridge and gantry cranes International Standards for design and manufacturing requirements and recommendations First
TR 16880
Edition
TR 16913
Plastics Pipes and Fittings - Definitinos of Types of Test First Edition
TR 16982
Ergonomics of Human-System Interaction - Usability Methods Supporting Human-Centred Design First Edition
TR 17055
Steel - Determination of Silicon Content - Inductively Coupled Plasma Atomic Emission Spectrometric Method First Edition
TR 17119
Health informatics Health informatics profiling framework First Edition
TR 17165-2
Hydraulic fluid power Hose assemblies Part 2: Recommended practices for hydraulic hose assemblies First Edition
TR 17400
Space systems Space launch complexes, integration sites and other facilities General testing guidelines First Edition
TR 16015
ISO
TR 17452
ISO
TR 17641-3
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TR 17663
TR 17671-1
TR 17671-2
TR 17671-3
TR 17671-4
TR 17671-5
TR 17671-6
TR 17671-7
TR 17737
TR 17766
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Intelligent transport systems ù Using UML for defining and documenting ITS/TICS interfaces First Edition
Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 3: Externally loaded
tests First edition
Welding - Guidelines for Quality Requirements for Heat Treatment in Connection with Welding and Allied Processes First Edition
Welding - Recommendations for Welding of Metallic Materials - Part 1: General Guidance for Arc Welding First Edition
Welding - Recommendations for Welding of Metallic Materials - Part 2: Arc Welding of Ferritic Steels
Welding - Recommendations for Welding of Metallic Materials - Part 3: Arc Welding of Stainless Steels First Edition
Welding - Recommendations for Welding of Metallic Materials - Part 4: Arc Welding of Stainless Steels First Edition
Welding Recommendations for welding of metallic materials Part 5: Welding of clad steels First Edition
Welding Recommendations for welding of metallic materials Part 6: Laser beam welding First Edition
Welding Recommendations for welding of metallic materials Part 7: Electron beam welding First Edition
Workplace air ù Guidelines for selecting analytical methods for sampling and analysing isocyanates in air First Edition
Centrifugal pumps handling viscous liquids Performance corrections First edition
Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel First
TR 17784
Edition
TR 17844
Welding Comparison of standardised methods for the avoidance of cold cracks First Edition
TR 17944
Banking - Security and Other Financial Servies - Framework for Security in Financial Systems First Edition
TR 18001
Information technology Radio frequency identification for item management Application requirements profiles First Edition
Information technology Programming languages, their environments and system software interfaces Technical Report on C++
TR 18015
Performance First Edition
TR 18016
Information technology Message Handling Systems (MHS) Interworking with Internet e-mail First Edition
TR 18037
Programming languages C Extensions to support embedded processors First Edition
TR 18044
Information technology Security techniques Information security incident management First Edition
Information technology Automatic identification and data capture techniques Radio frequency identification device performance test
TR 18046
methods First Edition
Information technology Radio frequency identification device conformance test methods Part 2: Test methods for air interface
TR 18047-2
communications below 135 kHz First Edition
TR 18047-3 CORR Information technology ù Radio frequency identification device conformance test methods ù Part 3: Test methods for air interface
1
communications at 13,56 MHz TECHNICAL CORRIGENDUM 1
Information technology Radio frequency identification device conformance test methods Part 3: Test methods for air interface
TR 18047-3
communications at 13,56 MHz First Edition
Information technology Radio frequency identification device conformance test methods Part 4: Test methods for air interface
TR 18047-4
communications at 2,45 GHz First Edition
Information technology Radio frequency identification device conformance test methods Part 6: Test methods for air interface
TR 18047-6
communications at 860 MHz to 960 MHz First Edition
ISO
TR 18047-7
ISO
TR 18053
ISO
TR 18057
ISO
TR 18112
ISO
TR 18124
Information technology Radio frequency identification device conformance test methods Part 7: Test methods for active air interface
communications at 433 MHz First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Glossary of Definitions and
Terminology for Computer Supported Telecommunications Applications (CSTA) Phase III Fisrt Edition
Information technology Telecommunications and information exchange between systems Using ECMA-323 (CSTA XML) in a Voice
Browser Environment First Edition
Clinical laboratory testing and in vitro diagnostic test systems In vitro diagnostic medical devices for professional use Summary of
regulatory requirements for information supplied by the manufacturer First Edition
Plastics piping systems Multilayer M (metal) pipes Test method for strength of the weld line in the metal layer and bonding between
layers by use of a cone First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TR 18307
TR 18392
TR 18394
TR 18492
TR 18529
TR 18569
TR 18690
TR 18930
TR 18931
Health Informatics - Interoperability and Compatibility in Messaging and Communication Standards - Key Characteristics First Edition
Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for determining backgrounds First Edition
Surface chemical analysis Auger electron spectroscopy Derivation of chemical information First Edition
Long-term preservation of electronic document-based information First Edition
Ergonomics - Ergonomics of Human-System Interaction - Human-Centred Lifecycle Process Descriptions First Edition
Safety of machinery Guidelines for the understanding and use of safety of machinery standards First Edition
Guidance for the selection, use and maintenance of safety, protective and occupational footwear First Edition
Imaging Materials - Protocols for Outdoor Weathering Experiments First Edition
Imaging Materials - Recommendations for Humidity Measurement and Control First Edition
ISO
ISO
ISO
ISO
ISO
ISO
TR 19032
TR 19033
TR 19038
TR 19120
TR 19121
TR 19122
ISO
ISO
TR 19319
TR 19358
Plastics Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions First Edition
Technical Product Documentation - Metadata for Construction Documentation Fisrt Edition
Banking and related financial services Triple DEA Modes of operation Implementation guidelines Fisrt Edition
Geographic Information - Functional Standards First Edition
Geographic Information - Imagery and Gridded Data First Edition
Geographic information/Geomatics Qualification and certification of personnel First Edition
Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Determination of lateral resolution,
analysis area, and sample area viewed by the analyser First Edition
Ergonomics - Construction and Application of Tests for Speech Technology First Edition
ISO
TR 19480
ISO
TR 19755
ISO
TR 19758 AMD 3
Polyethylene pipes and fittings for the supply of gaseous fuels or water Training and assessment of fusion operators First Edition
Information technology Programming languages, their environments and system software interfaces Object finalization for
programming language COBOL First Edition
Information technology ù Document description and processing languages ù DSSSL library for complex compositions AMENDMENT
3: Extensions to multilingual compositions (North and South Asian compositions) First Edition
ISO
TR 19758 AMD 2
ISO
TR 19758 AMD 1
ISO
ISO
ISO
TR 19758
TR 19759
TR 19760
ISO
TR 19764
ISO
TR 19765
ISO
ISO
TR 19766
TR 19767
ISO
TR 19769
ISO
ISO
TR 19782
TR 19791
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TR 19797
TR 19961
TR 20172
TR 20173
TR 20174
TR 20461
TR 20514
TR 20572
TR 20573
TR 20824
TR 20879
TR 20880
TR 20881
TR 20882
Information technology ù Document description and processing languages ù DSSSL library for complex compositions AMENDMENT
2: Extensions to multilingual compositions (South-East Asian compositions) First Edition
Information technology ù Document description and processing languages ù DSSSL library for complex compositions AMENDMENT
1: Extensions to basic composition styles and tables First Edition
Information technology ù Document description and processing languages ù DSSSL library for complex compositions First Edition
Software Engineering Guide to the Software Engineering Body of Knowledge (SWEBOK) First Edition
Systems engineering A guide for the application of ISO/IEC 15288 (System life cycle processes) First Edition
Information technology Guidelines, methodology and reference criteria for cultural and linguistic adaptability in information
technology products First Edition
Information technology ù Survey of icons and symbols that provide access to functions and facilities to improve the use of information
technology products by the elderly and persons with disabilities First Edition
Information technology ù Guidelines for the design of icons and symbols accessible to all users, including the elderly and persons
with disabilities First Edition
Information technology Programming languages Fortran Enhanced Module Facilities First Edition
Information technology Programming languages, their environments and system software interfaces Extensions for the
programming language C to support new character data types First Edition
Information technology Automatic identification and data capture techniques Effects of gloss and low substrate opacity on reading of
bar code symbols First Edition
Information technology Security techniques Security assessment of operational systems First Edition
Information technology Office machines Device output of 16 colour scales, output linearization method (LM) and specification of the
reproduction properties First Edition
Cranes Safety code on mobile cranes First Edition
Welding - Grouping systems for materials - European materials First Edition
Welding Grouping systems for materials American materials First edition
Welding Grouping systems for materials Japanese materials First edition
Determination of Uncertainty for Volume Measurements Made Using the Gravimetric Method First Edition
Health informatics Electronic health record Definition, scope and context First Edition
Footwear ù Performance requirements for components for footwear ù Accessories First Edition
Footwear Performance requirements for components for footwear Heels and top pieces First Edition
Ophthalmic instruments ù Background for light hazard specification in ophthalmic instrument standards First Edition
Footwear ù Performance requirements for components for footwear ù Uppers First Edition
Footwear ù Performance requirements for components for footwear ù Outsoles First Edition
Footwear ù Performance requirements for components for footwear ù Insoles First Edition
Footwear ù Performance requirements for components for footwear ù Lining and insocks First Edition
Footwear ù Performance requirements for components for footwear ù Shanks First Edition [Superseded By: DS DS/CEN ISO/TR
20883]
ISO
TR 20883
ISO
TR 20943-1
Information technology Procedures for achieving metadata registry (MDR) content consistency Part 1: Data elements First Edition
ISO
ISO
ISO
TR 20943-3
TR 20983
TR 21000-1
ISO
ISO
ISO
ISO
TR 21000-11
TR 21000-12
TR 21089
TR 21092
ISO
TR 21449
Information technology Procedures for achieving metadata registry content consistency Part 3: Value domains First Edition
Information and documentation Performance indicators for electronic library services First Edition
Information Technology - Multimedia Framework (MPEG-21) - Part1: Vision, Technologies and Strategy Second Edition
Information technology Multimedia framework (MPEG-21) Part 11: Evaluation Tools for Persistent Association Technologies First
Edition
Information technology Multimedia framework (MPEG-21) Part 12: Test Bed for MPEG-21 Resource Delivery First edition
Health informatics Trusted end-to-end information flows First Edition
Essential oils Characterization First Edition
Content Delivery and Rights Management Functional requirements for identifiers and descriptors for use in the music, film, video,
sound recording and publishing industries First Edition
ISO
TR 21730
ISO
ISO
ISO
ISO
TR 21890
TR 22134
TR 22157-2
TR 22221
ISO
TR 22250-1
ISO
TR 22305
ISO
TR 22335
ISO
ISO
TR 22520
TR 22521
ISO
ISO
TR 22588
TR 22648
Health informatics ù Use of mobile wireless communication and computing technology in healthcare facilities ù Recommendations for
electromagnetic compatibility (management of unintentional electromagnetic interference) with medical devices Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Interoperation of PISNs with IP
Networks First Edition
Practical guidelines for socioterminology First Edition
Bamboo Determination of physical and mechanical properties Part 2: Laboratory manual First Edition
Health informatics Good principles and practices for a clinical data warehouse First Edition
Information Technology - Document Description and Processing Languages - Regular Language Description for XML (RELAX) - Part
1: RELAX Core First Edition
Cigarettes Measurement of nicotinefree dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke Analysis of
data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances First Edition
Surface chemical analysis ù Depth profiling ù Measurement of sputtering rate: mesh-replica method using a mechanical stylus
profilometer First Edition
Portable hand-held forestry machines A-weighted emission sound pressure levels at the operator s station Comparative data in
2002 First Edition
Portable hand-held forestry machines Vibration emission values at the handles Comparative data in 2002 First Edition
Optics and photonics Lasers and laser-related equipment Measurement and evaluation of absorption-induced effects in laser optical
components First Edition
Footwear ù Performance requirements for components for footwear ù Stiffeners and toepuffs First Edition
ISO
TR 22676
ISO
TR 22767
ISO
ISO
ISO
TR 22824
TR 22869
TR 22898
ISO
TR 22971
ISO
TR 22979
ISO
TR 23000-1
ISO
ISO
ISO
TR 23272
TR 23462
TR 23602
ISO
ISO
TR 23627
TR 24094
ISO
ISO
ISO
TR 24098
TR 24430
TR 24498
ISO
ISO
TR 24532
TR 24704
ISO
TR 24705
ISO
TR 24710
ISO
TR 24715
ISO
TR 24718
Prosthetics Testing of ankle-foot devices and foot units Guidance on the application of the test loading conditions of ISO 22675 and
on the design of appropriate test equipment First Edition
Information technology Telecommunications and information exchange between systems Using CSTA for SIP phone user agents
(uaCSTA) First Edition
Welding consumables Predicted and measured FN in specifications A position statement of the experts of IIW Commission IX First
Edition
Medical laboratories Guidance on laboratory implementation of ISO 15189:2003 First Edition
Review of outputs for fire containment tests for buildings in the context of fire safety engineering First Edition
Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in
designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results First Edition
Ophthalmic implants Intraocular lenses Guidance on assessment of the need for clinical investigation of intraocular lens design
modifications First Edition
Information technology ù Multimedia application format (MPEG-A) ù Part 1: Purpose for multimedia application formats First edition
Information technology Common Language Infrastructure (CLI) Technical Report on Information Derived from Partition IV XML File
Second Edition
Space systems ù Guidelines to define the management framework for a space project First Edition
Toughness of chain steels First Edition
Information technology Telecommunications and information exchange between systems Corporate Telecommunication Networks
Mobility for Enterprise Communications First Edition
Analysis of natural gas Validation methods for gaseous reference materials First Edition
Intelligent transport systems ù System architecture, taxonomy and terminology ù Procedures for developing ITS deployment plans
utilizing ITS system architecture First Edition
Paints and varnishes Guidelines for the determination of the precision of a test method by interlaboratory trials First Edition
Paper, board and pulps Estimation of uncertainty for test methods First Edition
Intelligent transport systems Systems architecture, taxonomy and terminology Using CORBA (Common Object Request Broker
Architecture) in ITS standards, data registries and data dictionaries First Edition
Information Technology - Customer premises cabling for wireless access points First Edition
Information technology Office machines Machines for colour image reproduction Method of specifying image reproduction of colour
devices by digital and analog test charts First Edition
Information technology Radio frequency identification for item management Elementary tag licence plate functionality for ISO/IEC
18000 air interface definitions First Edition
Information technology Programming languages, their environments and system software interfaces Technical Report on the
Conflicts between the ISO/IEC 9945 (POSIX) and the Linux Standard Base (ISO/IEC 23360) First Edition
Information technology Programming languages Guide for the use of the Ada Ravenscar Profile in high integrity systems First
Edition
ISO
TR 24722
ISO
ISO
ISO
TR 24731-1
TR 24741
TR 24746
ISO
ISO
ISO
ISO
ISO
TR 24750
TR 24774
TR 24857
TR 25107
TR 25108
ISO
ISO
TR 25398
TR 25438
ISO
TR 25599
ISO
ISO
TR 25679
TR 25901
ISO
TR 26905
ISO
ISO
TR 27245
TR 27609
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TR 27628
TR 27809
TR 28980
TS 2963
TS 3567
TS 3632-1
TS 3632-2
TS 3669-2
TS 3716
TS 4949
Information technology ù Biometrics ù Multimodal and other multibiometric fusion First Edition
Information technology - Programming languages, their environments and system software interfaces - Extensions to the C library
Part 1: Bounds-checking interfaces First Edition
Information technology ù Biometrics tutorial First Edition
Information technology Generic cabling for customer premises Mid-span DTE power insertion First Edition
Information technology û Assessment and mitigation of installed balanced cabling channels in order to support 10GBASE-T First
edition
Software and systems engineering ù Life cycle management ù Guidelines for process description First Edition
Synthetic industrial diamond grit products Single-particle compressive failure strength ôDiaTest-SIö system First edition
Non-destructive testing Guidelines for NDT training syllabuses First Edition
Non-destructive testing Guidelines for NDT personnel training organizations First Edition
Earth-moving machinery Guidelines for assessment of exposure to whole-body vibration of ride-on machines Use of harmonized
data measured by international institutes, organizations and manufacturers First Edition
Information technology Common Language Infrastructure (CLI) Technical Report: Common Generics First Edition
Cranes Jib cranes International Standards for design, manufacturing, use and maintenance requirements and recommendations
First Edition
Mechanical testing of metals - Symbols and definitions in published standards First Edition; Together with ISO 23718 replaces ISO
TR 12735-1:1996
Welding and related processes ù Vocabulary Soudage et techniques connexes ù Vocabulaire First Edition
Information technology Telecommunications and information exchange between systems Enterprise Communication in Next
Generation Corporate Networks (NGCN) involving Public Next Generation Networks (NGN) First Edition
Cranes ù Tower cranes ù International Standards for design, manufacture, use and maintenance requirements and
recommendations First edition
Vibration in hand-held tools ù Vibration measurement methods for grinders ù Evaluation of round-robin test First Edition
Workplace atmospheres ù Ultrafine, nanoparticle and nano-structured aerosols ù Inhalation exposure characterization and
assessment First edition
Health informatics - Measures for ensuring patient safety of health software First Edition
Ophthalmic optics ù Spectacle lenses ù Parameters affecting lens power measurement First Edition
Cheese and processed cheese products Determination of citric acid content Enzymatic method First Edition
Vacuum gauges - Calibration by direct comparison with a reference gauge First Edition
Saffron (Crocus sativus L.) Part 1: Specification First Edition: Replaces ISO 3632-1; 1993
Saffron (Crocus sativus L.) Part 2: Test methods First Edition: Replaces ISO 3632-2; 1993
Vacuum technology - Bakable flanges - Part 2: Dimensions of knife-edge flanges First Edition
Hydrometry Functional requirements and characteristics of suspendedsediment samplers First Edition;: 1977
Steel names based on letter symbols First Edition
ISO
TS 6090
ISO
ISO
TS 7024
TS 7240-9
ISO
ISO
ISO
TS 7821
TS 8611-2
TS 8611-3
ISO
TS 9250-1
ISO
ISO
TS 9250-2
TS 9941
ISO
TS 10272-2
ISO
TS 10303-27
ISO
TS 10303-28
ISO
TS 10303-35
ISO
TS 10303-304
ISO
TS 10303-324
ISO
TS 10303-325
ISO
TS 10303-332
ISO
TS 10303-1001
ISO
TS 10303-1002
Milk and dried milk, buttermilk and buttermilk powder, whey and whey powder Detection of phosphatase activity First Edition IDF/RM
82:2004(E)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Thermoplastics Recommended
practice for installation First Edition; Supersedes ISO TR 7024
Fire detection and alarm systems Part 9: Test fires for fire detectors First Edition
Tobacco and tobacco products Preparation and constitution of identical samples from the same lot for collaborative studies for the
evaluation of test methods First Edition; Replaces ISO TR 7821: 1982
Pallets for materials handling Flat pallets Part 2: Performance requirements and selection of tests First Edition
Pallets for materials handling ù Flat pallets ù Part 3: Maximum working loads First Edition [Replaced: ISO 8611]
Earth-moving machinery Multilingual listing of equivalent terms Part 1: General Engins de terrassement Liste multilingue de termes
Úquivalents Partie 1: Termes gÚnÚraux First Edition
Earth-moving machinery Multilingual listing of equivalent terms Part 2: Performance and dimensions Engins de terrassement Liste
multilingue de termes Úquivalents Partie 2: Performance et dimensions First Edition
Milk and canned evaporated milk Determination of tin content Spectrometric method Second Edition
Microbiology of food and animal feeding stuffs Horizontal method for detection and enumeration of Campylobacter spp. Part 2:
Colony-count technique First Edition; Together with ISO 10272-1: 2006 replaces ISO 10272: 1995
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 27: Implementation Methods:
Java TM Programming Language Binding to the Standard Data Access Interface with Internet/Intranet Extensions First Edition
Industrial automation systems and integration Product data representation and exchange Part 28: Implementation methods: XML
representations of EXPRESS schemas and data First Edition
Industrial automation systems and integration Product data representation and exchange Part 35: Conformance testing
methodology and framework: Abstract test methods for standard data access interface (SDAI) implementations First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 304: Abstract Test Suite:
Mechanical Design Using Boundary Representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 324: Abstract Test Suite:
Mechanical Product Definition for Process Plans Using Machining Features First Edition
Industrial automation systems and integration Product data representation and exchange Part 325: Abstract test suite: Building
elements using explicit shape representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 332: Abstract Test Suite:
Technical Data Packaging Core Information and Exchange First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1001: Application Module:
Appearance Assignment First Edition; CD-Rom Application Modules
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1002: Application Module: Colour
First Edition
ISO
TS 10303-1003
ISO
TS 10303-1004
ISO
TS 10303-1005
ISO
TS 10303-1006
ISO
TS 10303-1007
ISO
TS 10303-1008
ISO
TS 10303-1009
ISO
TS 10465-1
ISO
TS 10811-1
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1003: Application Module: Curve
Appearance First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1004: Application Module:
Elemental Geometric Shape First Edition; CD-Rom Application Modules
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1005: Application Module:
Elemental Topology First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1006: Application Module:
Foundation Representation Second Edition; CD-Rom Application Modules
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1007: Application Module:
General Surface Appearance First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1008: Application Module: Layer
Assignment First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1009: Application Module: Shape
Appearance and Layers First Edition
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) ù Part 1: Installation
procedures First Edition [Superseded: ISO TR 10465-1]
Mechanical Vibration and Shock - Vibration and Shock in Buildings with Sensitive Equipment - Part 1: Measurement and Evaluation
First Edition
ISO
TS 10811-2
Mechanical Vibration and Shock - Vibration and Shock in Buildings with Sensitive Equipment - Part 2: Classification First Edition
ISO
TS 10839
ISO
TS 10993-19
ISO
ISO
TS 10993-20
TS 11073-92001
ISO
TS 11133-1
ISO
ISO
TS 11133-2
TS 11139
ISO
ISO
TS 11155-1
TS 11155-2
Polyethylene Pipes and Fittings for the Supply of Gaseous Fuels - Code of Practice for Design, Handling and Installation First Edition
Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials
First Edition
Biological evaluation of medical devices Part 20: Principles and methods for immunotoxicology testing of medical devices First
Edition
Health informatics ù Medical waveform format ù Part 92001: Encoding rules First Edition
Microbiology of Food and Animal Feeding Stuffs - Guidelines on Preparation and Production of Culture Media - Part 1: General
Guidelines on Quality Assurance for the Preparation of Culture Media in the Laboratory First Edition
Microbiology of food and animal feeding stuffs Guidelines on preparation and production of culture media Part 2: Practical guidelines
on performance testing of culture media First Edition
Sterilization of Health Care Products - Vocabulary Sterilisation Des Produits De Sante - Vocabulaire Second Edition
Road Vehicles - Air Filters for Passenger Compartments - Part 1: Test for Particulate Filtration First Edition; Supersedes ISO TR
11155-1:1994
Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration First edition
ISO
ISO
ISO
ISO
TS 11370
TS 11725
TS 12029
TS 12033
ISO
ISO
ISO
TS 12104
TS 12180-1
TS 12180-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TS 12181-1
TS 12181-2
TS 12780-1
TS 12780-2
TS 12781-1
TS 12781-2
TS 12902
ISO
TS 12927
ISO
ISO
ISO
ISO
ISO
ISO
TS 12928
TS 13353
TS 13399-2
TS 13399-3
TS 13399-4
TS 13399-5
ISO
ISO
TS 13399-50
TS 13399-60
ISO
ISO
TS 13399-100
TS 13474
ISO
ISO
TS 13475-2
TS 13499
Water Quality - Determination of Selected Organic Plant-Treatment Agents - Automated Multiple Development (AMD) Technique First
Edition; Corrected and Reprinted:06/01/2001
Solid Mineral Fuels Determination of Nitrogen Semi-Micro Gasification Method
Electronic imaging ù Forms design optimization for electronic image management Second Edition
Electronic Imaging - Guidance for Selection of Document Image Compression Methods First Edition
Road vehicles Gearshift patterns Manual transmissions with power-assisted gearchange and automatic transmissions with manualgearshift mode First Edition
Geometrical Product Specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form First Edition
Geometrical Product Specifications (GPS) Cylindricity Part 2: Specification operators First Edition
Geometrical Product Specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness First Edition; Replaces ISO
6318
Geometrical Product Specifications (GPS) Roundness Part 2: Specification operators First Edition
Geometrical Product Specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness First Edition
Geometrical Product Specifications (GPS) Straightness Part 2: Specification operators First Edition
Geometrical Product Specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness First Edition
Geometrical Product Specifications (GPS) Flatness Part 2: Specification operators First Edition
Solid Mineral Fuels - Determination of Total Carbon, Hydrogen and Nitrogen - Instrumental Methods First Edition
Lubricants, Industrial Oils and Related Products (Class L) - Family M (Metalworking) - Guidelines for Establishing Specifications First
Edition
Lubricants, Industrial Oils and Related Products (Class L) - Family R (Products for Temporary Protection Against Corrosion) Guidelines for Establishing Specifications First Edition
Diesel Fuel and Petrol Filters for Internal Combustion Engines - Initial Efficiency by Particle Counting First Edition
Cutting tool data representation and exchange Part 2: Reference dictionary for the cutting items First Edition
Cutting tool data representation and exchange ù Part 3: Reference dictionary for tool items First Edition
Cutting tool data representation and exchange ù Part 4: Reference dictionary for adaptive items First Edition
Cutting tool data representation and exchange ù Part 5: Reference dictionary for assembly items First Edition
Cutting tool data representation and exchange ù Part 50: Reference dictionary for reference systems and common concepts First
Edition
Cutting tool data representation and exchange ù Part 60: Reference dictionary for connection systems First Edition
Cutting tool data representation and exchange Part 100: Definitions, principles and methods for reference dictionaries First Edition
Acoustics - Impulse Sound Propagation for Environmental Noise Assessment First Edition
Acoustics - Stationary Audible Warning Devices Used Outdoors - Part 2: Precision Methods for Determination of Sound Emission
Quantities First Edition
Road Vehicles - Multimedia Data Exchange Format for Impact Tests First Edition
ISO
ISO
TS 13571
TS 13725
ISO
ISO
TS 13732-2
TS 13762
ISO
TS 13899-1
ISO
ISO
ISO
TS 13899-3
TS 14048
TS 14167
ISO
TS 14253-2
ISO
TS 14253-3
ISO
TS 14256-1
ISO
TS 14415
ISO
TS 14423
ISO
TS 14425
ISO
ISO
ISO
TS 14505-1
TS 14569-2
TS 14798
ISO
TS 14822-1
ISO
TS 14904
ISO
TS 14907-1
Life-Threatening Components of Fire - Guidelines for the Estimation of Time Available for Escape Using Fire Data First Edition
Hydraulic fluid power Cylinders Method for determining the buckling load First Edition
Ergonomics of the Thermal Environment - Methods for the Assessment of Human Responses to Contact with Surfaces - Part 2:
Human Contact with Surfaces at Moderate Temperature First Edition
Particle Size Analysis - Small Angle X-ray Scattering Method First Edition
Steel Determination of Mo, Nb and W contents in alloyed steel Inductively coupled plasma atomic emission spectrometric method
Part 1: Determination of Mo content First Edition
Steel Determination of Mo, Nb and W contents in alloyed steel Inductively coupled plasma atomic emission spectrometric method
Part 3: Determination of W content First Edition
Environmental Management - Life Cycle Assessment - Data Documentation Format First Edition
Gas analysis General quality assurance aspects in the use of calibration gas mixtures Guidelines First Edition
Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment - Part 2: Guide to
the Estimation of Uncertainty in GPS Measurement, in Calibration of Measuring Equipment and in Product Verification First Edition
Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines
for achieving agreements on measurement uncertainty statements First Edition
Soil Quality - Determination of Nitrate, Nitrite and Ammonium in Field-Moist Soils by Extraction with Potassium Chloride Solution Part 1: Manual Method First Edition
Ergonomics of the thermal environment Application of International Standards to people with special requirements First edition
Carbonaceous Materials Used in the Production of Aluminium - Cold-Ramming Pastes - Determination of Effective Binder Content
and Aggregate Content by Extraction with Quinoline, and Determination of Aggregate Size Distribution First Edition
Carbonaceous Materials Used in the Production of Aluminium - Cold-Ramming Pastes - Determination of Volatile-Matter Content of
Unbaked Pastes First Edition
Ergonomics of the thermal environment ù Evaluation of thermal environments in vehicles ù Part 1: Principles and methods for
assessment of thermal stress First Edition
Dental materials Guidance on testing of wear Part 2: Wear by two- and/or three body contact First Edition
Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology Second Edition
Traffic and Travel Information General specifications for medium-range pre-information via dedicated short-range communication
Part 1: Downlink First Edition
Road transport and traffic telematics Electronic fee collection (EFC) Interface specification for clearing between operators First
Edition
Road transport and traffic telematics Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of
test procedures First Edition
ISO
ISO
ISO
TS 14907-2
TS 14934-1
TS 14934-4
ISO
ISO
TS 15000-1
TS 15000-2
ISO
ISO
TS 15000-3
TS 15000-4
ISO
TS 15000-5
ISO
TS 15007-2
ISO
TS 15077
ISO
ISO
TS 15079
TS 15510
ISO
ISO
TS 15530-3
TS 15539
ISO
ISO
TS 15624
TS 15666
ISO
ISO
TS 15694
TS 15696
ISO
TS 15768
ISO
TS 15769
ISO
TS 15827
ISO
TS 15874-7
Road transport and traffic telematics Electronic fee collection Test procedures for user and fixed equipment Part 2: Conformance
test for the onboard unit application interface First Edition
Reaction-to-fire tests Calibration and use of radiometers and heat flux meters Part 1: General principles First Edition
Fire tests ù Calibration of heat flux meters ù Part 4: Guidance on the use of heat flux meters in fire tests First Edition
Electronic business eXtensible Markup Language (ebXML) Part 1: Collaboration-protocol profile and agreement specification
(ebCPP) First Edition
Electronic business eXtensible Markup Language (ebXML) Part 2: Message service specification (ebMS) First Edition
Electronic business eXtensible Markup Language (ebXML) Part 3: Registry information model specification (ebRIM) First Edition
Electronic business eXtensible Markup Language (ebXML) Part 4: Registry services specification (ebRS) First Edition
Electronic Business Extensible Markup Language (ebXML) Part 5: ebXML Core Components Technical Specification, Version
2.01(ebCCTS) First Edition
Road vehicles Measurement of driver visual behaviour with respect to transport information and control systems Part 2: Equipment
and procedures First Edition
Tractors and Self-Propelled Machinery for Agriculture and Forestry - Operator Controls - Actuating Forces, Displacement, Location
and Method of Operation First Edition
Powered Lawn, Garden and Horticultural Equipment - Operator Controls - Guidance on Actuating Forces, Displacement, Location
and Methods of Operation First Edition
Stainless Steels - Chemical Composition First Edition
Geometrical Product Specifications (GPS) Coordinate measuring machines (CMM): Technique for determining the uncertainty of
measurement Part 3: Use of calibrated workpieces or standards First Edition
Cardiovascular Implants - Endovascular Prostheses First Edition
Transport Information and Control Systems - Traffic Impediment Warning Systems (TIWS) - System Requirements First Ediiton
Acoustics - Assessment of Noise Annoyance by Means of Social and Socio-Acoustic Surveys First Edition
Mechanical vibration and shock Measurement and evaluation of single shocks transmitted from hand-held and hand-guided
machines to the hand-arm system First Edition
Cranes - List of Equivalent Terms Appareils De Levage A Charge Suspendue - Liste De Termes Equivalents First Edition
Measurement of Liquid Velocity in Open Channels - Design, Selection and Use of Electromagnetic Current Meters First Edition
Hydrometric Determinations - Liquid Flow in Open Channels and Partly Filled Pipes - Guidelines for the Application of Doppler-Based
Flow Measurements First Edition
Road vehicles ù Test procedures ù Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side
airbags First Edition
Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity
First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of
conformity First Edition
Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity
TS 15876-7
First Edition
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the
TS 15877-7
assessment of conformity First Edition
TS 15883-5
Washer-disinfectors Part 5: Test soils and methods for demonstrating cleaning efficacy First Edition
Industrial automation systems and integration ù Integration of life-cycle data for process plants including oil and gas production
TS 15926-4
facilities ù Part 4: Initial reference data First Edition
TS 16058
Health informatics Interoperability of telelearning systems First Edition
TS 16071
Ergonomics of Human-System Interaction - Guidance on Accessibility for Human-Computer Interfaces First Edition
TS 16111
Transportable gas storage devices Hydrogen absorbed in reversible metal hydride First Edition
TS 16332
Diesel engines Fuel filters Method for evaluating fuel/water separation efficiency First Edition
TS 16431
Hydraulic Fluid Power - Assembled Systems - Verification of Cleanliness First Edition
TS 16489 CORR 1 Water quality ù Guidance for establishing the equivalency of results TECHNICAL CORRIGENDUM 1 First Edition
TS 16489
Water quality ù Guidance for establishing the equivalency of results First Edition
TS 16553
Road vehicles Data cables Test methods and requirements First Edition
TS 16610-1
Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts First Edition
TS 16610-20
Geometrical product specifications (GPS) Filtration Part 20: Linear profile filters: Basic concepts First Edition
TS 16610-22
Geometrical product specifications (GPS) Filtration Part 22: Linear profile filters: Spline filters First Edition
TS 16610-29
Geometrical product specifications (GPS) Filtration Part 29: Linear profile filters: Spline wavelets First Edition
TS 16610-40
Geometrical product specifications (GPS) Filtration Part 40: Morphological profile filters: Basic concepts First Edition
Geometrical product specifications (GPS) Filtration Part 41: Morphological profile filters: Disk and horizontal line-segment filters First
Edition
TS 16610-41
TS 15875-7
ISO
ISO
ISO
TS 16610-49
TS 16628
TS 16630
ISO
ISO
ISO
TS 16649-3
TS 16732
TS 16733
ISO
ISO
TS 16799
TS 16922
Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques First Edition
Tracheobronchial tubes Recommendations for size designation and labelling First Edition
Metallic Materials - Method of Hole Expanding Test First Edition
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of Ô-glucuronidase-positive Escherichia coli Part 3: Most probable number technique using 5-bromo-4-chloro-3-indolyl-Ô-Dglucuronide First Edition
Fire safety engineering - Guidance on fire risk assessment First Edition
Fire safety engineering Selection of design fire scenarios and design fires First Edition
Rolling Bearings - Dynamic Load Ratings and Rating Life - Discontinuities in the Calculating of Basic Dynamic Load Ratings First
Edition
Natural Gas - Guidelines for Odorizing Gases First Edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Quality management systems Particular requirements for the application of ISO 9001:2000 for automotive production and relevant
service part organizations Second Edition; Corrected and Reprinted: 12/15/2003
Road vehicles Ergonomic aspects of transport information and control systems (TICS) Procedures for determining priority of onTS 16951
board messages presented to drivers First Edition
TS 16952-1
Technical product documentation Reference designation system Part 1: General application rules First Edition
TS 17090-1
Health Informatics - Public Key Infrastructure - Part 1: Framework and Overview First Edition
TS 17090-2
Health Informatics - Public Key Infrastructure - Part 2: Certificate Profile First Edition
TS 17090-3
Health Informatics - Public Key Infrastructure - Part 3: Policy Management of Certification Authority First Edition
TS 17104
Rotary tool for threaded fasteners Hydraulic impulse tools Performance test method First Edition
TS 17117
Health Informatics - Controlled Health Terminology - Structure and High-Level Indicators First Edition
TS 17226
Leather Chemical tests Determination of formaldehyde content First edition; IULTCS/IUC 19
TS 17234
Leather Chemical tests Determination of certain azo colourants in dyed leathers First edition; IULTCS/IUC 20
Intelligent transport systems ù Automatic vehicle and equipment identification ù Intermodal goods transport architecture and
TS 17261 CORR 1 terminology TECHNICAL CORRIGENDUM 1 First Edition
Intelligent transport systems ù Automatic vehicle and equipment identification ù Intermodal goods transport architecture and
TS 17261
terminology First edition
TS 17262
Automatic vehicle and equipment identification Intermodal goods transport Numbering and data structures First Edition
TS 17263
Automatic vehicle and equipment identification Intermodal goods transport System parameters First Edition
TS 17369
Statistical data and metadata exchange (SDMX) First edition
TS 17431
Fire tests Reduced-scale model box test First Edition
TS 17450-1 CORR Geometrical product specifications (GPS) ù General concepts ù Part 1: Model for geometrical specification and verification
1
TECHNICAL CORRIGENDUM 1 First Edition
TS 16949
ISO
TS 17450-1
ISO
ISO
TS 17450-2
TS 17477
ISO
TS 17573
ISO
ISO
ISO
ISO
TS 17574
TS 17576
TS 17764-1
TS 17764-2
ISO
TS 17845
Geometrical product specifications (GPS) General concepts Part 1: Model for geometrical specification and verification First Edition
Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties First
Edition
Acceptance Tests for CO2-Laser Beam Machines for Welding and Cutting Using 2D Moving Optics Type First Edition
Road Transport and Traffic Telematics Electronic Fee Collection (EFC) Systems architecture for vehicle related transport services
First Edition
Road transport and traffic telematics Electronic fee collection (EFC) Guidelines for EFC security protection profiles First Edition
Dentistry Corrosion tests for amalgam First Edition
Animal feeding stuffs Determination of the content of fatty acids Part 1: Preparation of methyl esters First Edition
Animal Feeding Stuffs - Determination of the Content of Fatty Acids - Part 2: Gas Chromatographic Method First Edition
Welding and allied processes Designation system for imperfections Soudage et techniques connexes Syst×mes de dÚsignation des
dÚfauts First Edition
ISO
TS 17892-1
Geotechnical investigation and testing Laboratory testing of soil Part 1: Determination of water content First Edition
ISO
TS 17892-2
ISO
TS 17892-3
Geotechnical investigation and testing Laboratory testing of soil Part 2: Determination of density of fine-grained soil First Edition
Geotechnical investigation and testing Laboratory testing of soil Part 3: Determination of particle density Pycnometer method First
Edition
ISO
ISO
ISO
TS 17892-4
TS 17892-5
TS 17892-6
ISO
ISO
TS 17892-7
TS 17892-8
ISO
ISO
TS 17892-9
TS 17892-10
ISO
ISO
TS 17892-11
TS 17892-12
ISO
ISO
TS 17996
TS 18173
ISO
TS 18226
ISO
TS 18234-1
ISO
TS 18234-2
ISO
TS 18234-3
ISO
TS 18234-4
ISO
TS 18234-5
ISO
ISO
TS 18234-6
TS 18308
Geotechnical investigation and testing
Geotechnical investigation and testing
Geotechnical investigation and testing
Geotechnical investigation and testing
Edition
Geotechnical investigation and testing
Geotechnical investigation and testing
soil First Edition
Geotechnical investigation and testing
Geotechnical investigation and testing
First Edition
Geotechnical investigation and testing
Laboratory testing of soil
Laboratory testing of soil
Laboratory testing of soil
Laboratory testing of soil
Part 4: Determination of particle size distribution First Edition
Part 5: Incremental loading oedometer test First Edition
Part 6: Fall cone test First Edition
Part 7: Unconfined compression test on fine-grained soil First
Laboratory testing of soil Part 8: Unconsolidated undrained triaxial test First Edition
Laboratory testing of soil Part 9: Consolidated triaxial compression tests on water-saturated
Laboratory testing of soil Part 10: Direct shear tests First Edition
Laboratory testing of soil Part 11: Determination of permeability by constant and falling head
Laboratory testing of soil Part 12: Determination of Atterberg limits First Edition
Cheese Determination of rheological properties by uniaxial compression at constant displacement rate First Edition; IDF/RM 205
Non-destructive testing General terms and definitions Essais non destructifs Termes gÚnÚraux et dÚfinitions First Edition
Plastics pipes and fittings Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 1: Introduction, numbering
and versions First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 2: Syntax, Semantics and
Framing Structure (SSF) First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 3: Service and Network
Information (SNI) application First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 4: Road Traffic Message
(RTM) application First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 5: Public Transport
Information (PTI) application First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 6: Location referencing
applications First Edition
Health informatics Requirements for an electronic health record architecture First Edition
ISO
TS 18835
ISO
TS 18876-1
ISO
TS 18876-2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TS 19036
TS 19103
TS 19127
TS 19138
TS 19139
TS 19218
TS 19700
TS 19979
TS 20022-3
TS 20022-4
TS 20022-5
ISO
ISO
ISO
ISO
TS 20119
TS 20225
TS 20281
TS 20282-2
ISO
TS 20452
ISO
TS 20625
ISO
TS 20646-1
ISO
TS 20825
ISO
TS 20836
ISO
ISO
TS 20885
TS 20993
Inhalational anaesthesia systems Draw-over vaporizers and associated equipment First Edition
Industrial automation systems and integration Integration of industrial data for exchange, access and sharing Part 1: Architecture
overview and description First Edition
Industrial automation systems and integration Integration of industrial data for exchange, access and sharing Part 2: Integration and
mapping methodology First Edition
Microbiology of food and animal feeding stuffs Guidelines for the estimation of measurement uncertainty for quantitative
determinations First Edition
Geographic information Conceptual schema language First Edition
Geographic information Geodetic codes and parameters First Edition
Geographic information Data quality measures First Edition
Geographic information ù Metadata ù XML schema implementation First Edition
Medical devices Coding structure for adverse event type and cause First Edition
Controlled equivalence ratio method for the determination of hazardous components of fire effluents First Edition
Ophthalmic optics Contact lenses Hygienic management of multipatient use trial contact lenses First Edition
Financial services UNIversal Financial Industry message scheme Part 3: ISO 20022 modelling guidelines First Edition
Financial services UNIversal Financial Industry message scheme Part 4: ISO 20022 XML design rules First Edition
Financial services UNIversal Financial Industry message scheme Part 5: ISO 20022 reverse engineering First Edition
Road Vehicles - Test Method for the Quantification of On-Centre Handling - Determination of Dispersion Metrics for Straight-Line
Driving First Edition
Global Medical Device Nomenclature for the Purpose of Regulatory Data Exchange First Edition
Water quality Guidance on statistical interpretation of ecotoxicity data First edition
Ease of operation of everyday products Part 2: Test method for walk-up-and-use products First Edition
Requirements and Logical Data Model for a Physical Storage Format (PSF) and an Application Program Interface (API) and Logical
Data Organization for PSF used in Intelligent Transport Systems (ITS) Database Technology First Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) Rules for Generation of XML Scheme Files
(XSD) on the Basis of EDI(FACT) Implementation Guidelines First Edition
Ergonomic procedures for the improvement of local muscular workloads Part 1: Guidelines for reducing local muscular workloads
First Edition
Road Vehicles - Drawbar Couplings, Drawbar Eyes, Fifth Wheel Kingpins, Hook Couplins and Toroidal Eyes - Wear Limits for in-use
Mecahanical Couplings First Edition
Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens Performance testing for thermal cyclers First Edition
Gaseous media fire-extinguishing systems Area coverage fire test procedure Engineered and preengineered extinguishing units
First Edition
Biological evaluation of medical devices Guidance on a riskmanagement process First Edition
ISO
TS 21091
ISO
ISO
TS 21098
TS 21108
ISO
TS 21268-1
ISO
TS 21268-2
ISO
ISO
ISO
ISO
ISO
TS 21268-3
TS 21432
TS 21609
TS 21667
TS 21747
ISO
ISO
TS 21748
TS 21749
ISO
TS 21872-1
ISO
TS 21872-2
ISO
TS 21929-1
ISO
TS 21931-1
ISO
ISO
TS 22003
TS 22004
ISO
TS 22028-2
ISO
ISO
TS 22028-3
TS 22269
ISO
TS 22475-2
Health informatics - Directory services for security, communications and identification of professionals and patients First Edition
Foodstuffs Nucleic acid based methods of analysis of genetically modified organisms and derived products Information to be
supplied and procedure for the addition of methods to ISO 21569, ISO 21570 or ISO 21571 First Edition
Hand-held power tools Impulse wrenches Dimensions and tolerances of interface to power socket First edition
Soil quality ù Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials ù Part 1: Batch test
using a liquid to solid ratio of 2 l/kg dry matter First Edition
Soil quality ù Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 2: Batch test
using a liquid to solid ratio of 10 l/kg dry matter First Edition
Soil quality ù Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 3: Up-flow
percolation test First Edition
Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction First Edition
Road vehicles EMC guidelines for installation of aftermarket radio frequency transmitting equipment First Edition
Health informatics Health indicators conceptual framework First Edition
Statistical methods Process performance and capability statistics for measured quality characteristics First Edition
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation First Edition
Measurement and uncertainty for metrological applications Repeated measurements and nested experiments First Edition
Microbiology of food and animal feeding stuffs ù Horizontal method for the detection of potentially enteropathogenic Vibrio spp. ù Part
1: Detection of Vibrio parahaemolyticus and Vibrio cholerae First Edition
Microbiology of food and animal feeding stuffs ù Horizontal method for the detection of potentially enteropathogenic Vibrio spp. ù Part
2: Detection of species other than Vibrio parahaemolyticus and Vibrio cholerae First Edition
Sustainability in building construction Sustainability indicators Part 1: Framework for the development of indicators for buildings First
Edition
Sustainability in building construction Framework for methods of assessment for environmental performance of construction works
Part 1: Buildings First Edition
Food safety management systems ù Requirements for bodies providing audit and certification of food safety management systems
First Edition
Food safety management systems Guidance on the application of ISO 22000:2005 First Edition
Photography and graphic technology Extended colour encodings for digital image storage, manipulation and interchange Part 2:
Reference output medium metric RGB colour image encoding (ROMM RGB) First Edition
Photography and graphic technology Extended colour encodings for digital image storage, manipulation and interchange Part 3:
Reference input medium metric RGB colour image encoding (RIMM RGB) First Edition
Reaction to fire tests Fire growth Full-scale test for stairs and stair coverings First Edition
Geotechnical investigation and testing Sampling methods and groundwater measurements Part 2: Qualification criteria for
enterprises and personnel First edition
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
TS 22475-3
TS 22476-10
TS 22476-11
TS 22559-1
TS 22595-1
TS 22600-1
TS 22600-2
TS 22911
TS 22964
23081-1
ISO
TS 23081-2
ISO
TS 23165
ISO
ISO
ISO
TS 23810
TS 24154
TS 24155
ISO
TS 24348
ISO
TS 24530-1
ISO
TS 24530-2
ISO
TS 24530-3
ISO
TS 24530-4
ISO
ISO
ISO
ISO
ISO
ISO
TS 24817
TS 25238
TS 25377
TS 26844
TS 28923
TS 28924
Geotechnical investigation and testing ù Sampling methods and groundwater measurements ù Part 3: Conformity assessment of
enterprises and personnel by third party First Edition
Geotechnical investigation and testing Field testing Part 10: Weight sounding test First edition
Geotechnical investigation and testing Field testing Part 11: Flat dilatometer test First edition
Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs) First Edition
Dentistry Plant area equipment Part 1: Suction systems First Edition
Health informatics Privilege management and access control Part 1: Overview and policy management First Edition
Health informatics Privilege management and access control Part 2: Formal models First Edition
Dentistry Preclinical evaluation of dental implant systems Animal test methods First Edition
Milk and milk products Detection of Enterobacter sakazakii First Edition
Information and documentation Records management processes Metadata for records Part 1: Principles First Edition
Information and documentation ù Records management processes ù Metadata for records ù Part 2: Conceptual and implementation
issues First Edition
Geometrical product specifications (GPS) Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
First Edition
Cardiovascular implants and artificial organs Checklist for preoperative extracorporeal circulation equipment setup First Edition
Hydrometry Measuring river velocity and discharge with acoustic Doppler profilers First Edition
Hydrometry ù Hydrometric data transmission systems ù Specification of system requirements First Edition
Ophthalmic optics ù Spectacle frames ù Method for the simulation of wear and detection of nickel release from metal and
combination spectacle frames Second Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 1:
Introduction, common data types and tpegML First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 2:
tpeg-locML First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 3:
tpeg-rtmML First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 4:
tpeg-ptiML First Edition
Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing
and inspection First Edition
Health informatics ù Classification of safety risks from health software First Edition
Hydrometric uncertainty guidance (HUG) First Edition
Milk and milk products Determination of antimicrobial residues Tube diffusion test First Edition; IDF/RM 215
Agricultural machinery ù Guards for moving parts of power transmission ù Guard opening with tool First Edition
Agricultural machinery ù Guards for moving parts of power transmission ù Guard opening without tool First Edition
ISO
ISO
ISO
ISO
ISO
ISO
TS 29001
TTA 1
TTA 2
TTA 3
TTA 4
TTA 5
Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and
service supply organizations First Edition/Cobranded with API SPEC Q1
Advanced Technical Ceramics - Unified Classification System First Edition
Tensile Tests for Discontinuously Reinforced Metal Matrix Composites at Ambient Temperatures First Edition
Polycrystalline Materials - Determination of Residual Stresses by Neutron Diffraction First Edition
Measurement of thermal conductivity of thin films on silicon substrates First Edition
Code of practice for creep/fatigue testing of cracked components First Edition