Caprolactone

Limbal Stem Cell Deficiency (LSCD) is a very serious and painful disease that often results in impaired vision. Cultivation of limbal stem cells for clinical application is usually performed on carriers such as amniotic membrane or surgical fibrin gel. Transplantation of these grafts is associated with the risk of local postoperative infection that can destroy the graft and devoid therapeutic benefit. For this reason, electrospun scaffolds are good alternatives, as proven to mimic the natural cells surroundings, while their fabrication technique is versatile with regard to polymer functionalization and scaffolds architecture. This study considers the development of poly(ε-caprolactone) (PCL) immune-compatible and biodegradable electrospun scaffolds, comprising cefuroxime (CF) or titanium dioxide (TiO2) active components, that provide both bactericidal activity against eye infections and support of limbal stem cells growth in vitro. The PCL/CF scaffolds were prepared by blend electro...

At the time being and for environmental reasons, th e use of volatile organic compounds (VOCs) has to be restricted, which makes the search for environmentally compliant polymerization media and systems highly desirable. Pr sently, attention is paid to the use of supercritical fluids (SCF), especially supercritica l rbon dioxide (scCO 2), as a potential green solvent. Indeed, scCO 2 exhibits low cost (2 $/kg), absence of toxicity, n on flammability, easy recyclability and very low critical parameters (P c = 73.8 bar, Tc = 31.1 °C), compared to others SCF like water (P c = 372b, Tc = 220°C). Moreover, the solvent strength, i.e. den sity and polarity of CO2, can be finely tuned by adjusting the pressure and the temperature which makes it very useful in numerous applications such as supercritical fluid extraction, organic synthesis, homogeneous and supported catalysis, (co ntrolled) polymerizations as well as for polymers processing and nanocomposites preparation.

Jackfruit mucilage (JM) obtained from the fruit, Artocarpus heterophyllus was melt blended with poly(ε‐caprolactone) (PCL). The physical properties of the blends with more than 60 wt% PCL were investigated. Depression in the equilibrium melting temperature () and the presence of extinction rings in the spherulites of PCL in the blends confirmed miscibility of the two components. The carbonyl and the COC groups of PCL and JM were responsible for the interactions as identified by Fourier transform infrared spectroscopy. The thermal stability of PCL decreased marginally in the blends with increasing JM content. The scanning electron microscopy (SEM) images indicated that no phase separation occurred. Porosity and the mechanical strength of the blends decreased with increasing JM content. Blends exposed to porcine pancreatic lipase showed enzymatic degradation of JM but not PCL and SEM images showed holes in the sample indicative of selective degradation of JM. Cell growth inhibition ...

The management of chronic wounds is challenging. The factors that impede wound healing include malnutrition, diseases (such as diabetes, cancer), and bacterial infection. Most of the presently utilized wound dressing materials suffer from severe limitations, including poor antibacterial and mechanical properties. Wound dressings formulated from the combination of biopolymers and synthetic polymers (i.e., poly (vinyl alcohol) or poly (ε-caprolactone) display interesting properties, including good biocompatibility, improved biodegradation, good mechanical properties and antimicrobial effects, promote tissue regeneration, etc. Formulation of these wound dressings via electrospinning technique is cost-effective, useful for uniform and continuous nanofibers with controllable pore structure, high porosity, excellent swelling capacity, good gaseous exchange, excellent cellular adhesion, and show a good capability to provide moisture and warmth environment for the accelerated wound healing ...

This research investigates the accelerated hydrolytic degradation process of both anatomically designed bone scaffolds with a pore size gradient and a rectangular shape (biomimetically designed scaffolds or bone bricks). The effect of material composition is investigated considering poly-ε-caprolactone (PCL) as the main scaffold material, reinforced with ceramics such as hydroxyapatite (HA), β-tricalcium phosphate (TCP) and bioglass at a concentration of 20 wt%. In the case of rectangular scaffolds, the effect of pore size (200 μm, 300 μm and 500 μm) is also investigated. The degradation process (accelerated degradation) was investigated during a period of 5 days in a sodium hydroxide (NaOH) medium. Degraded bone bricks and rectangular scaffolds were measured each day to evaluate the weight loss of the samples, which were also morphologically, thermally, chemically and mechanically assessed. The results show that the PCL/bioglass bone brick scaffolds exhibited faster degradation kin...

Biocatalysis has developed in the last decades as a major tool for green polymer synthesis. The particular ability of lipases to catalyze the synthesis of novel polymeric materials has been demonstrated for a large range of substrates. In this work, novel functional oligoesters were synthesized from ε-caprolactone and D,L/L-malic acid by a green and sustainable route, using two commercially available immobilized lipases as catalysts. The reactions were carried out at different molar ratios of the comonomers in organic solvents, but the best results were obtained in solvent-free systems. Linear and cyclic oligomeric products with average molecular weights of about 1500 Da were synthesized, and the formed oligoesters were identified by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis. The oligoester synthesis was not enantioselective in the studied reaction conditions. The operational stability of both biocatalysts (Novozyme 435 and ...

Tissue engineering fibrous scaffolds serve as three-dimensional (3D) environmental framework by mimicking the extracellular matrix (ECM) for cells to grow. Biodegradable polycaprolactone (PCL) microfibers were fabricated to mimic the ECM as a scaffold with 7.5% (w/v) and 12.5% (w/v) concentrations. Lower PCL concentration of 7.5% (w/v) resulted in microfibers with bead defects. The average diameter of fibers increased at higher voltage and the distance of tip to collector. Further investigation was performed by the incorporation of nanosized hydroxyapatite (nHA) into microfibers. The incorporation of 10% (w/w) nHA with 7.5% (w/v) PCL solution produced submicron sized beadless fibers. The microfibrous scaffolds were evaluated using various techniques. Biodegradable PCL and nHA/PCL could be promising for tissue engineering scaffold application.

Electrospinning is useful for fabricating nanofibrous structure with different composition and morphologies. It offers great advantages through its geometrical structure and biomimetic property, which can provide a suitable environmental site for cell growth. The fiber diameter is entangled by the concentration of PCL with some adjustment of parameters during electrospinning process. PCL with lower concentration had bead structure while higher concentration had smooth fiber. The incorporation of nanoparticle hydroxyapatite (nHA) into poly(ɛ-caprolactone) fiber was studied. The fiber diameter of PCL was increased with the addition of nHA. Composition of fiber at lower concentrations of PCL and nHA into the polymer produced fiber with a homogenous distribution of nHA in PCL fiber with less agglomeration. The immersion of PCL/nHA fiber in simulated body fluid (SBF) had bone-like apatite layer on its surface while PCL showed no results. PCL/nHA showed high water uptake and had improved ...

Objective Scaffolds provided a surface on which cells could attach, proliferate, and differentiate. Nowadays, bone tissue engineering offers hope for treating bone cancer. Poly(e-caprolactone) (PCL)/graphene have capability as an osteogenic and regenerative therapy. It could be used to produce bone tissue engineering scaffolds. The purpose of this study was to investigate the ability of PCL/graphene to enhance the osteoinductive mechanism. Materials and Methods The PCL/graphene scaffold was developed utilizing a particulate-leaching process and cultured with osteoblast-like cells MG63 at 0.5, 1.5, and 2.5 wt% of graphene. We evaluated the porosity, pore size, migratory cells, and cell attachment of the scaffold. Statistical Analysis Data was expressed as the mean ± standard error of the mean and statistical analyses were performed using one-way analysis of variance and Tukey's post hoc at a level of p-value < 0.05. Results Porosity of scaffold with various percentage of graph...