Predicted Mean Vote

For naturally ventilated buildings (NVB) located in the tropical regions, thermal comfort (TC) prediction based on predicted mean vote (PMV) standard has shown some deviations from the observed results. Hot and humid environmental conditions throughout the year and personal ...

This survey of thermal comfort in classrooms aimed to define empirically the preferred temperatures, neutral temperatures and acceptable temperature ranges for Australian school children, and to compare them with findings from adult populations. The survey was conducted in a mixture of air-conditioned, evaporative-cooled and naturally ventilated classrooms in nine schools located in three distinct subtropical climate zones during the summer of 2013. A total of
2850 questionnaires were collected from both primary (grade) and secondary (high) schools. An indoor operative temperature of about 22.58C was found to be the students’ neutral and preferred temperature, which is generally cooler
than expected for adults under the same thermal environmental conditions. Despite the lower-than-expected neutrality,
the school children demonstrated considerable adaptability to indoor temperature variations, with one thermal sensation unit equating to approximately 48C operative temperature. Working on the industry-accepted assumption that an acceptable range of indoor operative temperatures corresponds to group mean thermal sensations of 20.85 through to 10.85, the present analysis indicates an acceptable summertime range for Australian students from 19.5 to 26.68C. The analyses also revealed between-school differences in thermal sensitivity, with students in locations exposed
to wider weather variations showing greater thermal adaptability than those in more equable weather districts

For example, thermal indices that are derived from the energy balance of the human body can be of great use for tourism. Standard climate data, such as air temperature, air humidity and wind speed are required in order to calculate and quantify the thermal bioclimatic conditions. ...

This study provides comprehensive details of evaporative cooling options for building air-conditioning (AC) in Multan (Pakistan). Standalone evaporative cooling and standalone vapor compression AC (VCAC) systems are commonly used in Pakistan. Therefore, seven AC system configurations comprising of direct evaporative cooling (DEC), indirect evaporative cooling (IEC), VCAC, and their possible combinations, are explored for the climatic conditions of Multan. The study aims to explore the optimum AC system configuration for the building AC from the viewpoints of cooling capacity, system performance, energy consumption, and CO2 emissions. A simulation model was designed in DesignBuilder and simulated using EnergyPlus in order to optimize the applicability of the proposed systems. The standalone VCAC and hybrid IEC-VCAC & IEC-DEC-VCAC system configurations could achieve the desired human thermal comfort. The standalone DEC resulted in a maximum COP of 4.5, whereas, it was 2.1 in case of t...

 Bioclimatic conditions have been assessed for a large urban area located in the tropical highlands of central Mexico using the indices (in °C) of resultant temperature (RT) and effective temperature (ET). The well-developed heat island effect the city generates, reduces the number of nights categorized as cold (ET between 5 and 15° C) to cool (ET from 15 to 18.5° C). Most days fall in the cold to cool range and during the warm season (April to June) the bioclimate of Mexico City is mostly within the neutral (comfort) range. The effect of the nocturnal (to the west) and daytime (to the east of the town) heat island is noticeable in the central and northern sectors. The daytime heat island located in these regions, albeit small (urban air temperature 2–3° C greater than rural), compared with the nocturnal heat island intensity (9–10° C) still adds energy to the already heated afternoon urban air. ET values in the north and central sectors approach the threshold for comfort (ET of 25° C) during the warm months around noon. It is not surprising to find that as the nocturnal heat island has increased over the years (1921–1985) as the city grew, so has the ET for the central district and indicating the dominating role of temperature in the ET index. Assessment of the diurnal cycle of bioclimatic conditions in downtown Mexico City by means of two empirical indices (effective temperature and thermopreferendum) throughout the years gave similar results to those obtained from the application of Fanger’s predicted mean vote (PMV) model. An attempt has been made to characterize four bioclimatic zones in the capital city.

This study provides comprehensive details of evaporative cooling options for building air-conditioning (AC) in Multan (Pakistan). Standalone evaporative cooling and standalone vapor compression AC (VCAC) systems are commonly used in Pakistan. Therefore, seven AC system configurations comprising of direct evaporative cooling (DEC), indirect evaporative cooling (IEC), VCAC, and their possible combinations, are explored for the climatic conditions of Multan. The study aims to explore the optimum AC system configuration for the building AC from the viewpoints of cooling capacity, system performance, energy consumption, and CO2 emissions. A simulation model was designed in DesignBuilder and simulated using EnergyPlus in order to optimize the applicability of the proposed systems. The standalone VCAC and hybrid IEC-VCAC & IEC-DEC-VCAC system configurations could achieve the desired human thermal comfort. The standalone DEC resulted in a maximum COP of 4.5, whereas, it was 2.1 in case of t...

In this study the contribution of meteorological parameters to the total variability of respiratory infections (RI) is analysed. For this purpose, data on the daily numbers of general practitioner (GP) consultations for RI during the year 2002 were used. This dataset has been compiled by the Local Health Service in the surroundings of Athens, Greece (Acharnes city). The meteorological data obtained by the Meteorological Station of the National Observatory of Athens comprise daily values of mean, maximum, and minimum air temperature, air temperature range, relative humidity, absolute humidity, sunshine, surface atmospheric pressure, wind speed, as well as day-to-day changes of these parameters. Furthermore, the following biometeorological parameters and thermal indices were also evaluated: mean radiant temperature (T (mrt)), predicted mean vote (PMV), physiologically equivalent temperature (PET) and standard effective temperature (SET*) as well as their day-to-day changes. First, the...

For naturally ventilated buildings (NVB) located in the tropical regions, thermal comfort (TC) prediction based on predicted mean vote (PMV) standard has shown some deviations from the observed results. Hot and humid environmental conditions throughout the year and personal ...

In this paper, we describe a computational model dedicated to building an apnoea monitoring system for newborn babies. The proposed model is based on whole body plethysmography, which involves non-invasive measurement of lung ventilation indirectly from the pressure deflections generated when a subject breathes inside a chamber of fixed volume (Bert in C R Soc Biol Paris 20:22–23, 1868). The computational model simulates thermal and environmental flow conditions occurring in the neonate chamber, especially steady state flow with heat transfer and carbon dioxide (CO2) transport during the exhalation phase. This permits the variance of all critical parameters and the analysis of their effects on the distributions of interest. The main objective is to study thermal and air quality comfort conditions under which infants can be monitored for long-term periods. The method deploys computational fluid dynamics techniques and parametric modelling which, by allowing input parameters to be modulated, represent a more efficient and flexible analytical tool than previous experimental techniques. Simulation data reveal that the largest flow rates occur in areas near the openings with slight formation of air recirculation zones; temperature distribution shows signs of stratification, with higher temperatures than the supplied air, CO2 distribution presents acceptable air quality level and predicted mean vote index affords a relatively acceptable thermal comfort level. This analytical approach can be considered as innovative, and can find a new application in clinical infant apnoea monitoring in a way that allows determination of the optimal location for placing a sensor to detect respiration activity without any contact with the infant’s body, and without any risk, in contrast to available whole body plethysmography techniques previously tested in infants (Fleming et al. in J Appl Physiol 55:1924–1931, 1983).