This paper introduces a new design of solar stills utilizing concentration, porous evaporation, internal condensation, and thermo-sephonic circulation. A steady-state mathematical model of the still has been proposed and simulated. The... more
This paper introduces a new design of solar stills utilizing concentration, porous evaporation, internal condensation, and thermo-sephonic circulation. A steady-state mathematical model of the still has been proposed and simulated. The results of the study are presented in figures showing both efficiency and distillate rate. The simulation has shown that the decrease of wind speed and condenser temperature increases the efficiency of the still and distillation rates. The increase of ambient temperature increases the efficiency and the distillation rates. On the other hand, the increase of solar intensity increases the distillation rate; but the efficiency does not increase for entire intensity range.
El uso de la energía solar es una realidad. Las investigaciones al respecto abarcan una serie de tecnologías para el mejor aprovechamiento de este vital recurso. Pero en el Perú su empleo es poco frecuente en proporción a lo que se... more
El uso de la energía solar es una realidad. Las investigaciones al respecto abarcan una serie de tecnologías para el mejor aprovechamiento de este vital recurso. Pero en el Perú su empleo es poco frecuente en proporción a lo que se utiliza en otros países. En la región Arequipa, la radiación equivalente alcanza de 1.100 a 1.200 watts por metro cuadrado que en comparación con otras ciudades es alta. El objetivo de esta investigación fue la generación de vapor con energía solar, para ser utilizado en el proceso de planchado de prendas en alpaca. Para ello, se empleó un sistema de generación de temperatura media entre 90 °C y 130 °C, mediante un tubo de vidrio al vacío como principal concentrador, se aumentó el área con un colector parabólico y un sistema de seguimiento solar para mejorar su eficiencia. Previo a su construcción, el sistema fue diseñado de tal modo que cumpliera con los requerimientos deseados. Luego se procedió a crear un prototipo cuya estructura fue modificada, hasta obtener el flujo de vapor deseado (0,7kg/min) a 110 °C, también se obtuvo una constante adimensional promedio de 38,25 para el área solar proyectada. Finalmente, se procedió a hacer el cálculo estructural del colector, teniendo en cuenta la carga por viento.