Increasing use of the ground as a thermal reservoir is expected in the near future. Shallow geothermal energy (SGE) systems have proved to be sustainable alternative solutions for buildings and infrastructure conditioning in many areas... more
Increasing use of the ground as a thermal reservoir is expected in the near future. Shallow geothermal energy (SGE) systems have proved to be sustainable alternative solutions for buildings and infrastructure conditioning in many areas across the globe in the past decades. Recently novel solutions, including energy geostructures, where SGE systems are coupled with foundation heat exchangers, have also been developed. The performance of these systems is dependent on a series of factors, among which the thermal properties of the soil play a major role. The purpose of this paper is to present, in an integrated manner, the main methods and procedures to assess ground thermal properties for SGE systems and to carry out a critical review of the methods. In particular, laboratory testing through either steady-state or transient methods are discussed and a new synthesis comparing results for different techniques is presented. In situ testing including all variations of the thermal response test is presented in detail, including a first comparison between new and traditional approaches. The issue of different scales between laboratory and in situ
measurements is then analysed in detail. Finally, the thermo-hydro-mechanical behaviour of soil is introduced and discussed. These coupled processes are important for confirming the structural integrity of energy geostructures, but routine methods for parameter determination are still lacking.
This paper presents a broad overview of laboratory methods for measuring thermal properties and petrophysical parameters of carbonate rocks, and analytical methods for interpreting the obtained data. The investigation was conducted on... more
This paper presents a broad overview of laboratory methods for measuring thermal properties and petrophysical parameters of carbonate rocks, and analytical methods for interpreting the obtained data. The investigation was conducted on carbonate rock samples from the Kraków region of Poland in the context of shallow geothermal potential assessment. The measurement techniques used included standard macroscopic examinations; petrophysical investigations (porosity, density); analysis of mineral composition thermal conductivity (TC) and specific heat measurements; and advanced investigations with the use of computed tomography (CT). Various mathematical models, such as layer model, geometric mean, and spherical and non-spherical inclusion models, were applied to calculate thermal conductivity based on mineralogy and porosity. The aim of this paper was to indicate the optimal set of laboratory measurements of carbonate rock samples ensuring sufficient characterization of petrophysical and thermal rock properties. This concerns both the parameters directly characterizing the geothermal potential (thermal conductivity) and other petrophysical parameters, e.g., porosity and mineral composition. Determining the quantitative relationship between these parameters can be of key importance in the case of a shortage of archival thermal conductivity data, which, unlike other petrophysical measurements, are not commonly collected. The results clearly show that the best correlations between calculated and measured TC values exist for the subgroup of samples of porosity higher than 4%. TC evaluation based on porosity and mineral composition correlation models gives satisfactory results compared with direct TC measurements. The methods and results can be used to update the existing 3D parametric models and geothermal potential maps, and for the preliminary assessment of geothermal potential in the surrounding area.
Increasing use of the ground as a thermal reservoir is expected in the near future. Shallow geothermal energy (SGE) systems have proved to be sustainable alternative solutions for buildings and infrastructure conditioning in many areas... more
Increasing use of the ground as a thermal reservoir is expected in the near future. Shallow geothermal energy (SGE) systems have proved to be sustainable alternative solutions for buildings and infrastructure conditioning in many areas across the globe in the past decades. Recently novel solutions, including energy geostructures, where SGE systems are coupled with foundation heat exchangers, have also been developed. The performance of these systems is dependent on a series of factors, among which the thermal properties of the soil play a major role. The purpose of this paper is to present, in an integrated manner, the main methods and procedures to assess ground thermal properties for SGE systems and to carry out a critical review of the methods. In particular, laboratory testing through either steady-state or transient methods are discussed and a new synthesis comparing results for different techniques is presented. In situ testing including all variations of the thermal response test is presented in detail, including a first comparison between Energies 2017, 10, 2044 2 of 53 new and traditional approaches. The issue of different scales between laboratory and in situ measurements is then analysed in detail. Finally, the thermo-hydro-mechanical behaviour of soil is introduced and discussed. These coupled processes are important for confirming the structural integrity of energy geostructures, but routine methods for parameter determination are still lacking.
Increasing use of the ground as a thermal reservoir is expected in the near future. Shallow geothermal energy (SGE) systems have proved to be sustainable alternative solutions for buildings and infrastructure conditioning in many areas... more
Increasing use of the ground as a thermal reservoir is expected in the near future. Shallow geothermal energy (SGE) systems have proved to be sustainable alternative solutions for buildings and infrastructure conditioning in many areas across the globe in the past decades. Recently novel solutions, including energy geostructures, where SGE systems are coupled with foundation heat exchangers, have also been developed. The performance of these systems is dependent on a series of factors, among which the thermal properties of the soil play a major role. The purpose of this paper is to present, in an integrated manner, the main methods and procedures to assess ground thermal properties for SGE systems and to carry out a critical review of the methods. In particular, laboratory testing through either steady-state or transient methods are discussed and a new synthesis comparing results for different techniques is presented. In situ testing including all variations of the thermal response ...
This paper presents a broad overview of laboratory methods for measuring thermal properties and petrophysical parameters of carbonate rocks, and analytical methods for interpreting the obtained data. The investigation was conducted on... more
This paper presents a broad overview of laboratory methods for measuring thermal properties and petrophysical parameters of carbonate rocks, and analytical methods for interpreting the obtained data. The investigation was conducted on carbonate rock samples from the Krakow region of Poland in the context of shallow geothermal potential assessment. The measurement techniques used included standard macroscopic examinations; petrophysical investigations (porosity, density); analysis of mineral composition thermal conductivity (TC) and specific heat measurements; and advanced investigations with the use of computed tomography (CT). Various mathematical models, such as layer model, geometric mean, and spherical and non-spherical inclusion models, were applied to calculate thermal conductivity based on mineralogy and porosity. The aim of this paper was to indicate the optimal set of laboratory measurements of carbonate rock samples ensuring sufficient characterization of petrophysical and...
Increasing use of the ground as a thermal reservoir is expected in the near future. Shallow geothermal energy (SGE) systems have proved to be sustainable alternative solutions for buildings and infrastructure conditioning in many areas... more
Increasing use of the ground as a thermal reservoir is expected in the near future. Shallow geothermal energy (SGE) systems have proved to be sustainable alternative solutions for buildings and infrastructure conditioning in many areas across the globe in the past decades. Recently novel solutions, including energy geostructures, where SGE systems are coupled with foundation heat exchangers, have also been developed. The performance of these systems is dependent on a series of factors, among which the thermal properties of the soil play a major role. The purpose of this paper is to present, in an integrated manner, the main methods and procedures to assess ground thermal properties for SGE systems and to carry out a critical review of the methods. In particular, laboratory testing through either steady-state or transient methods are discussed and a new synthesis comparing results for different techniques is presented. In situ testing including all variations of the thermal response ...
Increasing use of the ground as a thermal reservoir is expected in the near future. Shallow geothermal energy (SGE) systems have proved to be sustainable alternative solutions for buildings and infrastructure conditioning in many areas... more
Increasing use of the ground as a thermal reservoir is expected in the near future. Shallow geothermal energy (SGE) systems have proved to be sustainable alternative solutions for buildings and infrastructure conditioning in many areas across the globe in the past decades. Recently novel solutions, including energy geostructures, where SGE systems are coupled with foundation heat exchangers, have also been developed. The performance of these systems is dependent on a series of factors, among which the thermal properties of the soil play a major role. The purpose of this paper is to present, in an integrated manner, the main methods and procedures to assess ground thermal properties for SGE systems and to carry out a critical review of the methods. In particular, laboratory testing through either steady-state or transient methods are discussed and a new synthesis comparing results for different techniques is presented. In situ testing including all variations of the thermal response ...
