E4.1L - highly dynamic, lightweight and cost-effective

All-round e-chain® and e-tubes for high dynamics. The E4.1L series was developed to combine the advantages of the E2/000 and E4.1 series in one series. On the one hand the stability of the E4.1 system and on the other hand the easy accessibility and assembly of the E2/000 system. The E4.1L system is the ideal energy chain for mechanical engineering and systems of all kinds, where technical requirements and cost-effectiveness must be in good proportion.

On the design principle of the E4.1L series

New, particularly cable-friendly interior partitioning programme available.

Pendulum and rigid KMA mounting bracket possible.

KMA Mounting bracket with all-round fastening option.

Full-steep e-chain®, can be swivelled open on both sides

Series E4.31L

inner height hi: 31mm
inner width Bi: 40 - 300 mm
bend radius R: 055 - 250 mm
pitch: 46 mm

e-chain®, crossbars every link

Series E4.38L

inner height hi: 38mm
inner width Bi: 50 - 400 mm
bend radius R: 063 - 350 mm
pitch: 56 mm

e-chain®, crossbars every link

Series E4.48L

inner height hi: 48 mm
inner width Bi: 50 - 400 mm
bend radius R: 075 - 350 mm
pitch: 67 mm

e-chain®, crossbars every link

Series E4.64L

inner height hi: 64 mm
inner width Bi: 50 - 400 mm
bend radius R: 100 - 400 mm
pitch: 91 mm

e-chain®, crossbars every link

e-tube, openable from both sides, pivoting lid - protection against chips and dirt

Series R4.31L

inner height hi: 31mm
inner width Bi: 50 - 300 mm
bend radius R: 075 - 250 mm
pitch: 46 mm

e-tube, swivelling lid

Series R4.38L

inner height hi: 38mm
inner width Bi: 50 - 300 mm
bend radius R: 100 - 350 mm
pitch: 56 mm

e-tube, swivelling lid

Series R4.48L

inner height hi: 48 mm
inner width Bi: 50 - 300 mm
bend radius R: 100 - 350 mm
pitch: 67 mm

e-tube, swivelling lid

Selection guide e-chain®

Specific parameters and a comparison table helps you find the right e-chain quickly.

Assembly instructions

Joining, separating and opening the e-chain® and e-tubes.

Assembly instructions

Application examples

Applications in various industrial sectors and in the igus® test laboratory.

E4.1L

Request a free sample of E4.1L!

Are you interested in the E4.1L system, but would like to hold it in your hands to make a final decision and get the best possible impression?
Then you are welcome to order this free sleeve from us.

Ask for a free sample now

E4.1L e-chain® with 4-part superstructure

Weight reduction combined with high stability
Optimised ratio of inner and outer dimensions thanks to narrower outer link and optimised opening bar geometry
30% lighter and cheaper than E4.1
e-chain® and e-tubes can be opened on both sides in the inner and outer radius
Very tight-fitting lids and bases, virtually no gaps or openings
Can be opened in the inner and outer radius
Inner cross section completely accessible for easy filling

Typical industries and applications

cost-effective alternative to E4.1
For self-supporting applications
If the stability of the E2/000 is not enough for you, but an E4.1 is oversized

Assembly videos

E4.1L Bow chain

Consulting

I look forward to answering your questions

Dieter Reitz+49 2203 9649 7070 Write e-mail

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:
24h

WhatsApp-Service:
Montag – Freitag: 8 – 16 Uhr