My contact person
Select location
After selection of your ZIP code, we designate the relevant staff to attend to you at once.
See all contacts
Energy chains for special solutions
Categories
Filter
System
Requirements
Application areas
Products for 3D movements
e-spool® flex - uninterrupted panel feed | Extension length 5-15m
- No slip ring
- Without interruption (no slip ring), for energy,
data, fluids and air - Space-saving
- Universal assembly
- Constant tensile strain on the cable
- Cost-effective
- Easy in case of repair
e-skin flat cable guidance system and CFCLEAN
- Modular and compact design
- Replace cables quickly
- Suitable for cleanrooms according to IPA ISO Class 1
- High reliability due to balanced stranded structure of CFCLEAN cable
- Available from stock
Upon request
To the product page
rol e-chain® system
Long travels and very high traversing speed As an energy chain with crossbars every link or as an enclosed e-tube.
Upon request
To the product page
ESD energy chains
Openable energy chains with mounting brackets and interior separation in electrically conductive ESD material available from stock.
Upon request
To the product page
e-skin® corrugated tube
- Space requirement: 80 - 200mm
- Bend radius: 40 - 55mm
- Unsupported length: depends on the guided cables
Upon request
To the product page
guidelok horizontal - upper run guide
Unhindered travel: no swarf can settle between the sliding surfaces of the upper and lower runs of the energy chain.
Upon request
To the product page
e-spool: multi-energy coil
The alternative to a cable reel – reduce cable wear and reliably guide different media.
Upon request
To the product page
guidelok slimline P/PS - vertical guide
- Up to 7m/s and 10m/s2
- Up to 80% less trough required, saving cost and weight
- For hanging systems up to 50m
Upon request
To the product page
PMA cable protection: diverse selection of tubes and systems
To protect flexible electric cables.
Upon request
To the product page
E4/4HD – long travels or "side-mounted"
Energy chains and tubes openable from both sides. Inner heights of 32 to 80mm. Especially suitable for "side-mounted" and travel distances of over 200m.
Upon request
To the product page
Hybrid energy chain YE.42
50% stronger than pure plastic energy chains* and 50% lighter than pure steel energy chains*. No rivets, no screws. Energy chain links openable quickly, for easy cable replacement.
- Inner height hi: 42mm
- Outer height ha: 76mm
- Inner widths Bi: 50 - 400mm
- Outer width Ba: 68 - 418mm
- Bend radii R: 100mm
- Pitch: 67mm
Hybrid energy chain YE.56
50% stronger than pure plastic energy chains* and 50% lighter than pure steel energy chains*. No rivets, no screws. Energy chain links openable quickly, for easy cable replacement.
- Inner height hi: 56mm
- Outer height ha: 90
- Inner widths Bi: 50 - 600mm
- Outer width Ba: 74 - 624mm
- Bend radius R: 100 - 500mm
- Pitch: 91mm
AX e-chains® series
Exterior stop-dogs prevent the accumulation of dust. All existing widths can be combined.
Upon request
To the product page
SCARA cable solution connection to ball screw
- Allows unrestricted rotation of the hose on the ball screw
- The length of the connection depends on the length of the ball screw of the SCARA robot.
- Enables the connection of corrugated hose with e-rib® (which are not included in the product)
- Available for SCARA Robots manufacturer: Epson, ABB, Yaskawa, Fanuc, Denso & Kuka
SCARA cable solution connecting piece
- Complete set of corrugated hose and e-rib®
- Available in different lengths
- Inner diameter of the corrugated hose is 29mm
Shopping Cart
The selected article has been added to your shopping cart.
From here you can initiate enquiries or orders.
From here you can initiate enquiries or orders.