My contact person
Select location
After selection of your ZIP code, we designate the relevant staff to attend to you at once.
See all contacts
Low Cost Automation
The robolink® modular robotic system allows you to automate manual work steps quickly and easily. Articulated arms in various lengths and sizes are available. The number of lubrication-free joints used ranges from two to six, and the robot can be equipped with various tools (e.g., grippers, suction cup, camera, etc.) as desired. robolink® robot components are characterised by their modularity. As a modular system, a robot arm can be configured as desired and therefore economically, and moreover it is also possible to obtain ready-to-use complete systems.
Categories
robolink® RL-DP-5 | Five degrees of freedom (DOF) | 790mm reach
Product information
Optionally available
- Payload up to 3.0 kg
- Up to 790 mm of reach
- Degrees of freedom: 5
- Speed: 7 picks/min.
- Min. service life: 1 million cycles
- Standard colour of robot: black, individual colour possible
Optionally available
6,288.59 USD/Pc.
To the product page
Room linear robot | DLE-RG-0001 | Workspace 500 x 500 x 100mm
Product information
Optionally available
- Payload up to 2.5 kg
- Working area 500 x 500 x 100 mm
- Degrees of freedom: 3
- Speed: up to 0.5 m/s
- Repeatability ± 0.5 mm
Optionally available
3,924.09 USD/Pc.
4 items, thereof ready for shipping:
1 in 24 hours
1 in 3 working days
To the product page
3-axis Delta robot | Working diameter 360 mm
Product information
Optionally available
- Up to 60 picks/min.
- For loads up to 5 kg
- For precision requirements of 0.5 mm
- At speeds up to max. 3.0 m/s
- Max. acceleration: 60 m/s²
Optionally available
- Proximity switches incl. Mounting bracket
- Various Control systems
- Cable set 3, 5 & 10 m
- e-chain set for 3-axis Delta - 360 mm
5,598.93 USD/Pc.
To the product page
Individual linear robots with any stroke length
You can request an individual drylin® E linear robot created according to your application parameters here.
Upon request
To the product page
SCARA robot 4 DOF with cladding | size M | 560 mm working space
Product information
Optionally available
- Payload: 2 kg
- Range: 560 mm
- Reach along the Z-axis: 500 mm
- Degrees of freedom: 4
- Speed: 20 picks/minute
- Minimum service life: 2.5 million cycles
- IP Protection Class IP45, splash-proof
Optionally available
7,416.95 USD/Pc.
To the product page
2-axis delta robot | Workspace 400 mm
Product information
Optionally available
- Up to 100 picks/min.
- Load capacity 5 kg
- For precision requirements of 0.5 mm
- At speeds up to max. 3.0 m/s
- Max. acceleration: 60 m/s²
Optionally available
- Proximity switches incl. Mounting bracket
- Various Control systems
- Cable set in 3, 5 & 10 m
- e-chain set for 2-axis Delta - 400 mm
4,935.36 USD/Pc.
To the product page
Robot cell for all igus robots - Size: Medium
Product information
- Suitable for igus® jointed arm, SCARA, Delta and gantry robots
- Dimensions: 1,000 x 880 x 2,030 mm
- Robot frame made of aluminium profiles
- One module, 50 robot types and an infinite number of possible applications
- With emergency stop, start and stop display and CE documentation
- Robot and control cabinet are installed by igus
- Energy chains not included in the price
9,300.00 USD/Pc.
To the product page
igus® Robot Control (iRC) software for gantries & delta robots
Product information
You can find all relevant documents in the downloads below.
TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software
- Diverse automation tasks with simple programming software
- For gantries and delta robots
- Easy software installation for Windows 10
- Use with a PC or tablet
- Seven digital inputs/outputs, CRI interface, ModbusTCP/IP for connection to master control systems, e.g. Siemens or Beckhoff
- 10m cable length
You can find all relevant documents in the downloads below.
TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software
Upon request
To the product page
ReBeL cobot 6 DOF
Product information
- Number of axes: 6
- Load capacity (max.): 2 kg
- Repeatability: ±1mm
- Reach: max. 664 mm
- Nominal reach: 400 mm
- Dynamics with 500 g load capacity: min. 7 picks/min
- Net weight: 8.2 kg
- Possible area of application: service robotics, cobot functions preparation
- Control system: plug and play or open source version
5,989.00 USD/Pc.
To the product page
New
ReBeL EduMove: mobile robot for education purposes
Product information
- Control via igus Robot Control or ROS2
- Mecanum wheels for lateral movement
- Simple assembly of the ReBeL (4 screws, 1 connector)
22,048.50 USD/Pc.
To the product page
robolink® RL-DP-4 | Four degrees of freedom (DOF) | 790mm reach
Product information
Optionally available
- Payload up to 3.0 kg
- Up to 790 mm of reach
- Degrees of freedom: 4
- Speed: 7 picks/min.
- Min. service life: 1 million cycles
- Standard colour of robot: black, individual colour possible
Optionally available
5,613.90 USD/Pc.
To the product page
3-axis Delta robot | Working diameter 660mm
Product information
Optionally available
- Up to 30 picks/min.
- For loads up to 5 kg
- For precision requirements of 0.5 mm
- At speeds up to max. 1.0 m/s
- Max. acceleration: 20 m/s²
Optionally available
- Proximity switches incl. Mounting bracket
- Various Control systems
- Cable set 3, 5 & 10 m
- e-chain set for 3-axis Delta - 660 mm
6,905.36 USD/Pc.
To the product page
Room linear robot | DLE-RG-0014 | Workspace 500 x 500 x 200mm
Product information
Optionally available
- Payload up to 10.0 kg
- Working area 500 x 500 x 200 mm
- Degrees of freedom: 3
- X & Y axis speed up to 0.5 m/s
- Z axis (spindle axis) speed max 20 mm/s
- Repeatability ± 0.5 mm
Optionally available
D1 assembly kit for 2-axis kinematics
Product information
- Set of 2x igus® D1 dryve, proximity switches incl. bracket, connection cables with straight connector in 10m length
- A wide range of automation tasks by simple parameterisation, no programming necessary
- For single axes, line, flat, linear and room linear robots and delta robots
- No software installation or app required
- Use with PC, tablet or smart phone
- Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
- Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff
TEST BEFORE INVEST - Try out the motor control system with online simulation here before you buy
Flat linear robot | DLE-FG-0005 | Workspace 1000 x 500mm
Product information
Optionally available
- Payload up to 15.0 kg
- Working area 1000 x 500 mm
- Degrees of freedom: 2
- Speed: up to 0.5 m/s
- Repeatability ± 0.5 mm
Optionally available
2,973.69 USD/Pc.
To the product page
Consulting
I would be happy to answer your questions personally
Shipping and consultation
In person:
Monday to Friday from 7 am - 8 pm.Saturdays from 8 am- 12 pm.
Online:
24h
Shopping Cart
The selected article has been added to your shopping cart.
From here you can initiate enquiries or orders.
From here you can initiate enquiries or orders.