canopy layer
Recently Published Documents

Abstract. Including radiative transfer processes within the urban canopy layer into microscale urban climate models (UCMs) is essential to obtain realistic model results. These processes include the interaction of buildings and vegetation with shortwave and longwave radiation, thermal emission, and radiation reflections. They contribute differently to the radiation budget of urban surfaces. Each process requires different computational resources and physical data for the urban elements. This study investigates how much detail modellers should include to parameterize radiative transfer in microscale building-resolving UCMs. To that end, we introduce a stepwise parameterization method to the Parallelized Large-eddy Simulation Model (PALM) system 6.0 to quantify individually the effects of the main radiative transfer processes on the radiation budget and on the flow field. We quantify numerical simulations of both simple and realistic urban configurations to identify the major and the minor effects of radiative transfer processes on the radiation budget. The study shows that processes such as surface and vegetation interaction with shortwave and longwave radiation will have major effects, while a process such as multiple reflections will have minor effects. The study also shows that radiative transfer processes within the canopy layer implicitly affect the incoming radiation since the radiative transfer model is coupled to the radiation model. The flow field changes considerably in response to the radiative transfer processes included in the model. The study identified those processes which are essentially needed to assure acceptable quality of the flow field. These processes are receiving radiation from atmosphere based on the sky-view factors, interaction of urban vegetation with radiation, radiative transfer among urban surfaces, and considering at least single reflection of radiation. Omitting any of these processes may lead to high uncertainties in the model results.

Helleborus niger is an evergreen species, while H. odorus is an herbaceous understorey species. They both develop flowers before the forest canopy layer closes. Their sepals remain after flowering and have multiple biological functions. To further elucidate the functions of sepals during flower development, we examined their optical and chemical properties, and the photochemical efficiency of photosystem II in the developing, flowering, and fruiting flowers. Sepals of the two species differed significantly in the contents of photosynthetic pigments and anthocyanins, but less in the UV-absorbing substances’ contents. Significant differences in photosynthetic pigment contents were also revealed within different developmental phases. The sepal potential photochemical efficiency of photosystem II was high in all developmental phases in H. odorus, whereas in H. niger, it was initially low and later increased. In the green H. odorus sepals, we obtained typical green leaf spectra with peaks in the green and NIR regions, and a low reflectance and transmittance in the UV region. On the other hand, in the white H. niger sepals in the developing and flowering phases, the response was relatively constant along the visible and NIR regions. Pigment profiles, especially chlorophylls, were shown to be important in shaping sepal optical properties, which confirms their role in light harvesting. All significant parameters together accounted for 44% and 34% of the reflectance and transmittance spectra variability, respectively. These results may contribute to the selection of Helleborus species and to a greater understanding of the ecological diversity of understorey plants in the forests.

Little attention has been paid to the impact of vertical canopy position on the leaf spectral properties of tall trees, and few studies have explored the ability of leaf spectra to characterize the variation of leaf traits across different canopy positions. Using a tower crane, we collected leaf samples from three canopy layers (lower, middle, and upper) and measured eight leaf traits (equivalent water thickness, specific leaf area, leaf carbon content, leaf nitrogen content, leaf phosphorus content, leaf chlorophyll content, flavonoid, and nitrogen balance index) in a subtropical evergreen broadleaved forest. We evaluated the variability of leaf traits and leaf spectral properties, as well as the ability of leaf spectra to track the variation of leaf traits among three canopy layers for six species within the entire reflectance spectrum. The results showed that the eight leaf traits that were moderately or highly correlated with each other showed significant differences along the vertical canopy profile. The three canopy layers of leaf spectra showed contrasting patterns for light-demanding (Castanopsis chinensis, Castanopsis fissa, Schima superba, and Machilus chinensis) and shade-tolerant species (Cryptocarya chinensis and Cryptocarya concinna) along the vertical canopy profile. The spectra at the lower and upper canopy layers were more sensitive than the middle layer for tracking the variation of leaf chlorophyll and flavonoid content. Our results revealed that it is important to choose an appropriate canopy layer for the field sampling of tall trees, and we suggest that flavonoid is an important leaf trait that can be used for mapping and monitoring plant growth with hyperspectral remote sensing.

Planting density affects crop microclimate and intra-plant competition, playing an important role on yield formation and resource use, especially in areas where the cotton is grown at relatively high plant densities in Xinjiang, China. However, more studies are needed to examine how the change in planting density affects the microclimate factors such as the fraction of light intercepted (FLI), air temperature(T) and relative humidity (RH) within different canopy layers, which in turn affect the boll number per plant (BNF), boll number per unit area (BNA), boll weight (BW), and boll-setting rate (BSR) at fruiting branch (FB) positions FB1–3, FB4–6, and FB≥7 in cotton. To quantify the relationships between boll characteristics, yield, and microclimate factors, we conducted a 2-year field experiment in 2019–2020 in Xinjiang with six plant densities: 9 (P1), 12 (P2), 15 (P3), 18 (P4), 21 (P5), and 24 (P6) plants m−2. With each three plants m−2 increase in density, the average FLI and RH across different canopy layers increased by 0.37 and 2.04%, respectively, whereas T decreased by 0.64 °C. The BNF at FB≥ 7, FB4–6, and FB1–3 decreased by 0.82, 0.33, and 0.5, respectively. The highest BNA was observed in the upper and middle layers in the P4 treatment and in the lowest canopy layer with the P5. The highest BW was measured in the middle canopy layer for P3, and the highest BSR was measured in the lower layer for P3. Plant density exhibited linear or quadratic relationships with FLI, T, and RH. Microclimate factors mainly affected the boll number in each layer, but had no significant effects on the BW in any layer or the BSR in the middle and lower layers. Cotton yield was non-linearly related to plant density. The 2-year maximum yield was achieved at a plant density of 21 plants m−2, but the yield increase compared to the yield with a density of 18 plants m−2was only 0.28%. Thus, we suggest that the optimal plant density for drip-irrigated cotton in Xinjiang is 18 plants m−2, which could help farmers grow machine-harvested cotton.

In the coastal ocean, interactions of waves and currents with large roughness elements, similar in size to wave orbital excursions, generate drag and dissipate energy. These boundary layer dynamics differ significantly from well-studied small-scale roughness. To address this problem, we derived spatially and phase-averaged momentum equations for combined wave–current flows over rough bottoms, including the canopy layer containing obstacles. These equations were decomposed into steady and oscillatory parts to investigate the effects of waves on currents, and currents on waves. We applied this framework to analyse large-eddy simulations of combined oscillatory and steady flows over hemisphere arrays (diameter $D$ ), in which current ( $U_c$ ), wave velocity ( $U_w$ ) and period ( $T$ ) were varied. In the steady momentum budget, waves increase drag on the current, and this is balanced by the total stress at the canopy top. Dispersive stresses from oscillatory flow around obstacles are increasingly important as $U_w/U_c$ increases. In the oscillatory momentum budget, acceleration in the canopy is balanced by pressure gradient, added-mass and form drag forces; stress gradients are small compared to other terms. Form drag is increasingly important as the Keulegan–Carpenter number $KC=U_wT/D$ and $U_c/U_w$ increase. Decomposing the drag term illustrates that a quadratic relationship predicts the observed dependences of steady and oscillatory drag on $U_c/U_w$ and $KC$ . For large roughness elements, bottom friction is well represented by a friction factor ( $f_w$ ) defined using combined wave and current velocities in the canopy layer, which is proportional to drag coefficient and frontal area per unit plan area, and increases with $KC$ and $U_c/U_w$ .

Urban forests provide various ecosystem services. Although the function of reducing particulate matter (PM) in the city is known, research into the reduction of PM according to the type and structure of various forests is still needed. It is essential to study the characteristics of PM concentration in urban riparian forests, which are frequently used for outdoor walks in the COVID-19 era. In this study, the diurnal and seasonal changes in PM10 and PM2.5 concentrations were analyzed in urban forests with different structures in the riparian forests located in central Seoul. The PM concentration was found to be high regardless of the time of the day in forests with a developed canopy layer. Similar results were found before and after leaf emergence compared with the seasonal PM concentration. The results of this study highlight the need for planned and periodic management of the canopy layer and underground vegetation to prevent the PM trapping effect to ensure the safe use of riparian forests in cities.

Abstract Ebony (Diospyros celebica Bakh.) is endemic species to Sulawesi that is experiencing population decline. It is known that population size is an important element for the dynamics of natural forests through changes in vegetation structure and composition that need to be monitored. This study aims to analyze the species diversity in natural habitats of genetically diverse ebony, namely: i) Bantimurung National Park (BB), ii) Cani Sirenreng Nature Park (CS), iii) Farhumpenai Nature Reserve (FP), and iv) Pangi Binangga Nature Reserve (PB). Data collection was carried out based on a modified transect line and plot with 20 m x 100 m in size. The results showed that as many as 28 families were identified, consisting of 44 species at the tree level, 37 species at the pole level, 39 species at the sapling level, and 31 species at the seedling level, respectively. The composition of vegetation in Babul National Park consists of 32 species, Cani Sirenreng consists of 18 species, Farhumpenai consists of 19 species, and Pangi Binanngga consists of 19 species. The species composition was dominated by Diospyros celebica Bakh., Dracontomelon dao (Blanco) Merr. & Rolfe, Canangium odoratum, Ficus benjamina L., Pterospermum celebicum Miq., Kleinhovia hospita L. and Vitex cofassus Reinw. Ex Blume. The diversity index (H’-Index) of tree species in BB, CS, FP, and PB were 0.82, 1.13, 1.03, and 1.60, respectively. The Important Value Index (INP-Index) of ebony in BB, CS, FP and PB were 18.01%, 74.1%, 60.13% and 113.5%, respectively. The structure of the forest canopy layer in BB and FP consists of three layers of canopy, while CS and PB consist of two layers of canopy.

Tree-of-heaven (Ailanthus altissima) is one of the most dangerous and widespread invasive woody plant species in Europe. Despite the fact that A. altissima is in the focus of an increasing number of research projects, the impact of its mass spread on native vegetation, its diversity, and changes in soil quality are still incomplete. The current study addresses the effects of this invasive species on plant diversity and soil parameters simultaneously. The main objective of our research is to determine the impact of cover and mass of A. altissima on the diversity of each forest layer; the examined soil parameters and on other selected environmental variables. For botanical and pedological investigations we selected nine A. altissima-dominated sites in Central Europe, in the Pannonian Biogeographical Region. Based on our results, it can be stated that fully grown A. altissima-dominated stands can displace other taxa by their shading and allelopathy, thereby reducing canopy layer diversity. The increase in the species richness of the shrub layer had a positive correlation with the diversity of the floor layer and also with the humus and ammonia content of the soil. As the diversity of shrub layer and floor layer positively correlated with many soil parameters, the diverse vegetation of these layers can represent a potential opportunity for the regeneration of areas infected with A. altissima.

To gain further insight into the ventilation at urban street intersections, this study conducted 3D simulations of the ventilation at right- and oblique-angled intersections under eight wind directions by using the Reynolds-averaged Navier–Stokes (RANS) κ-ε turbulence model. The divergent responses of ventilation and pollution concentration for the pedestrian zone (ped), the near-wall zone (nwz), and the canopy layer to the change in intersection typology and wind direction were investigated. The flow characteristics of the intersections, taken as the air flow hub, were explored by employing indices such as the minimum flow ratio (β) between horizontal openings. The results show that oblique wind directions lead to a lower total volumetric flow rate (Qtotal) but a higher β value for right-angled intersections. For T-shaped intersections, a larger cross-sectional area for the outflow helps to increase Qtotal. Oblique-angled intersections, for example, the X-shaped intersection, experience a more significant difference in Qtotal but a steady value of β when the wind direction changes. The vertical air-exchange rate for the intersection was particularly significant when the wind directions were parallel to the street orientation or when there was no opening in the inflow direction. The spatially averaged normalized pollutant concentration and age of air (τ*¯) for the pedestrian zone and the canopy layer showed similar changing trends for most of the cases, while in some cases, only the τped*¯ or τnwz*¯ changed obviously. These findings reveal the impact mechanism of intersection configuration on urban local ventilation and pollutant diffusion.