critical level
Recently Published Documents

The article substantiates the expediency of applying the basics of resource saving in the development of innovative technologies for strengthening serial parts and restoring worn ones. At the same time, the main task is the rational use of available material resources in the conditions of a decline in production, when it becomes profitable to restore metal-intensive parts worn out to a critical level. In capital repair of machines, the main problems are associated with the energy intensity of the process and a significant number of rejected parts that cannot be restored. Currently, most of the worn-out metal-intensive cast iron and steel body parts that have exhausted the resource are subjected to energy-intensive melting. For the reuse of metal-consuming parts in operation, a technology has been proposed for multilayer banding of a worn surface, in which steel tape is used instead of traditional banding rings. Winding the tape occurs under an interference in several layers. In this case, a multilayer bandage with interturn stresses is formed, which is not inferior in strength to a whole banding ring. The use of a steel “bandage” for the “treatment” of parts reduces the metal consumption for its manufacture by 2.5 times in comparison with the well-known one-piece ring made of round steel. As an example, the article substantiates the possibility of carrying out the banding process in relation to the restoration and strengthening of the seat under the bearing of the housing part. A multilayer bandage can also be used in the recovery of metal-intensive rolling rolls written off in scrap used on broadband cold rolling mills.

The article analyses theoretical and conceptual approaches to define the essence of economic security.The global economic transformations are characterized in the context of the impact on the national economic security. Indicators of all economic security com­ponents are analyzed by comparing them in dynamics with the critical level and proposals for the implementation of economic policy measures which are provided to secure Ukrai­nian economic policy.

This study was conducted to assess the micronutrient status of soils under three different management practices at the Nigerian Institute for Oil Palm Research (NIFOR), Benin City, Edo State, Nigeria. Soil samples were collected from three different fields Research (NIFOR), Benin City, Edo with different management practices. The samples were air dried and analyzed for Fe, Zn, Cu, and Mn contents using standard method. Data was subjected to ANOVA and correlation studies. Result showed that soil micronutrient status was generally low as revealed by their estimated levels of availability: field 53 (Mn = 0.0333; Zn = 3.723; Cu = 2.04; Fe = 6.4), field 56 (Mn = 0.0367; Zn = 3.737; Cu = 1.12; Fe = 7.0939), field 71 (Mn = 0.0167; Zn = 3.860; Cu = 2.89; Fe = 7.243). Fe and Zn were above critical level for the 3 fields. Mn was below the critical level for the 3 fields and was significantly higher in field 56 (Orlu and Kulfo series) (p≤ 0.05). They were all similar. Fe was significantly different in field 53 (Kulfo and Alagba series) but similar in fields 56 and 71 (p≤ 0.05). Cu was significantly different in the 3 fields tested with field 71 (Orlu and Alagba series) higher than the critical level. Correlation studies showed that pH had a positive and significant correlation with Fe and Zn as observed in fields 71 and 56 (r = 0.9934, P≤ 0.05) and (r = 0.9997, P ≤ 0.05) respectively. Cu was the only micronutrient that has correlation with clay on each of the fields: 53, 56 and 71 (r = 0.9929, P≤0.05) (r = 0.9988, P≤ 0.05) and (r = 0.9967, P ≤ 0.05) respectively. Strong correlation existed between clay and Fe in field 53 (r = 1, P≤ 0.05). The concentration of the micronutrients (Fe, Mn,Zn Cu), in field 53 were not extreme (neither the highest nor lowest) when comparing the three fields indicating that BMP (Best Management Practice) may be the best for maintaining good micronutrient level in soils supporting oil palm. Fields 53 and 56 is adequate in Fe and Zn but not adequate in Mn and Cu while field 71 was adequate in Zn, Fe, and Cu but not in Mn. Based on the result of this experiment, adequate fertilizers of these micronutrients as their respective sulphates or impurities should be added to maintain proper micronutrient level. 

Using firm-level data from Germany, this study examines the link between foreign ownership and the coverage by centralized (multi-employer) bargaining agreements. Conforming to theoretical considerations, the empirical analysis shows that it is important to distinguish between a direct and an indirect influence of foreign ownership on centralized collective bargaining. The direct influence of foreign ownership lowers the probability that a firm is covered by a centralized agreement. The indirect influence works through the unionization of the workforce. If the size of the firm does not exceed a critical level, the indirect influence counteracts the direct influence. Foreign ownership leads to a higher share of union members which, in turn, has a positive influence on the coverage by a centralized agreement. However, in very large firms the indirect influence appears to be negative. Foreign ownership is associated with a lower share of union members.

Aim: Fruits and common vegetables are now becoming too expensive for the poor consumers in Nigeria. The search for cheap, readily available and (locally sourced for the people in need of) nutritious food prompted this research work. Study Design: Six underutilized wild vegetables (Solanum microcarpon, Strichium sparganophora, Crassocephalum crepidiodes, Solanum nigrum, Myrianthus arboreus and Sterculia tragacantha) from Ado- Ekiti, Ekiti State, Nigeria were evaluated for their nutritional, mineral and anti-nutritional potentials. Place and Duration of Study: The collection of the samples were done in the month of December, 2020 in Ado Ekiti, Ekiti State, Nigeria and air dried for three weeks. Methodology: Young shoots of five indigenous vegetables were collected, washed thoroughly, air dried, pulverized and analysed using standard methods of AOAC. Results: The proximate analyses of the vegetables indicated that the moisture content, ash, fat, crude fiber, crude protein and carbohydrates ranged as follows: 6.17-8.85%, 4.73-6.59 %, 2.00-3.13%, 3.89-7.27%, 7.77-12.23% and 63.84-70.61% respectively. The total energy ranged from 1,367.85 to 1,467.85KJ/100g with low Coefficient of Variation (CV%) of 2.22. Mineral contents are of the following order K>Mg>Ca> P>Na>Fe>Zn. The result of the mineral ratio showed that the calculated mineral ratio for Na/K, K/ Na, Ca/P, Ca/Mg, Ca/K, Zn/Cu and [K/(Ca+Mg)] were below the critical level. The calculated mineral safety indexes (MSI) were lower than the tabulated values. The anti-nutrient contents (Cyanide, Saponins, and Oxalate) were below the threshold levels, Conclusion: Low MSI means that the vegetables could not pose health risk when consumed. The low anti-nutrient contents of the samples is an indication that the consumer would not suffer from mineral overload. The nutrition and mineral potentials of these vegetables could suggest their uses as nutritional supplements and are highly promising for food security and sustainability for the populace. 

Morphological changes occur in the leaves of trees under the influence of various air pollutants. Recording and assessing these changes reflects the state of the environment. The aim of the study was to assess the level of air pollution in the city of Kineshma, Ivanovo region, using the bioindication method. The technique of morphometry of pedunculate oak leaves and calculation of the index of fluctuating asymmetry were used. In all points of the city, a high asymmetry of oak leaf blades was noted, which indicates a critical level of atmospheric pollution. Ecotoxicants contained in emissions from enterprises and vehicles significantly violate the bilateral symmetry of oak leaf blades.

The article presents the results of a study to assess the provision of innovations at enterprises and organizations of the timber industry. The crisis consequences associated with restrictive measures had a significant impact on the timber industry. The changes are primarily related to the transfer of many workers to a remote form of work, the observance of social distance in the workplace. Many business leaders were forced to make management decisions to reduce production capacity. The key component of the developed methodology is the formed deterministic factor model, which reflects the provision of innovations at enterprises, formed on the basis of indicators characterizing the level of innovative development. The study was based on such indicators as the dynamics of research funding in the structure of GDP, the dynamics of costs associated with financing innovative activities, the level of innovative activity, as well as the volume of innovative products. Based on the results of the assessment, it was concluded that pulp and paper enterprises are provided with innovations most of all, against the background of more than a twofold increase in the costs of science and innovation. Then there are woodworking enterprises, where there is a stable low level of innovation provision. The worst situation is demonstrated by furniture enterprises, where a critical level of innovation provision is noted.