stainless steel powder
Recently Published Documents

Abstract Fused Filament Fabrication (FFF) technology is used to create metal parts in this paper. A binder formula is developed for 316L stainless steel powder, composed of polypropylene (PP), styrene ethylene butylene styrene (SEBS) and paraffin wax (PW). The binder is mixed with the 316L stainless steel powder to produce mixture which is then extruded into filament. The optimum binder formula, PP:SEBS:PW=5:2:2, is obtained by orthogonal experiment. After optimization, mixture viscosity is reduced, filament tensile strength is guaranteed, rigidity is improved. The filament can be printed by a desktop FFF printer to obtain green parts. Binder within the green parts can be sufficiently removed by solvent and thermal debinding, and the shape of printed parts can be maintained well. After sintering, shrunken 316L stainless steel parts can be created, some pores distributed inside. With finer metal powder, the relative density of sintered part can be increased to 96%. The research ideas of this paper can provide effective methods for the development and optimization of binder.

Abstract The product quality of selective laser melting (SLM) is closely related to the alloy powder characteristics, including the size distribution and the oxygen content. In this work, the 316L stainless steel powder was prepared by a vacuum atomization furnace and sieved into a normal-sized distribution range from 15 to 53 μm with a median diameter of 37.4 μm, and a fine-sized distribution range from 10 to 38 μm with a median diameter of 18.9 μm. Then they were mixed with each other in different proportions. The results show that, under the condition of the same SLM parameters, the SLM part, with adding a large amount of fine-sized powder, has a lower density and strength, as well as more holes and spheroidized particles, compared with the SLM part with adding a small amount of finer-sized powder. Furthermore, the 316L stainless steel powder with a high oxygen content was prepared by a non-vacuum atomization furnace. Although the 316L stainless steel powder with a high oxygen content can be evenly spread in the SLM process, the surface layer of the powder is easy to form an oxide film during the cooling and solidification of powder inside the molten pool. Under the action of thermal stress, the small crack forms and expands along the oxide film, eventually leading to large cracks inside the melt channel.