full state feedback
Recently Published Documents

Using the notion of exponential QSR-dissipativity, this work presents necessary and sufficient conditions for exponential stabilizability of nonlinear systems by linear static output feedback (SOF). It is shown that, under mild assumptions, the exponential stabilization of the closed-loop system around the origin is equivalent to the exponential QSR-dissipativity of the plant. Furthermore, whereas strict QSR-dissipativity is only sufficient for SOF asymptotic stabilization, it is proved to be necessary and sufficient for full state feedback control. New necessary and sufficient conditions for SOF stabilizability of linear systems are presented as well, along with a linear and noniterative semidefinite strategy for controller design. Necessary linear matrix inequality (LMI) conditions for stabilization are also introduced. Some examples illustrate the usefulness of the proposed approach.

Using the notion of exponential QSR-dissipativity, this work presents necessary and sufficient conditions for exponential stabilizability of nonlinear systems by linear static output feedback (SOF). It is shown that, under mild assumptions, the exponential stabilization of the closed-loop system around the origin is equivalent to the exponential QSR-dissipativity of the plant. Furthermore, whereas strict QSR-dissipativity is only sufficient for SOF asymptotic stabilization, it is proved to be necessary and sufficient for full state feedback control. New necessary and sufficient conditions for SOF stabilizability of linear systems are presented as well, along with a linear and noniterative semidefinite strategy for controller design. Necessary linear matrix inequality (LMI) conditions for stabilization are also introduced. Some examples illustrate the usefulness of the proposed approach.

The control and stabilization of a ball and wheel system around the equilibrium point are challenging tasks because it is an underactuated, nonlinear, and open-loop unstable plant. In this paper, Pareto design of a Fuzzy Full State Feedback Linearization Controller (FFSFLC) for the ball and wheel system based upon a novel multi-objective optimization algorithm is introduced. To this end, at first, a full state feedback linearization approach is employed to stabilize the dynamics of the system. Next, appropriate fuzzy systems are determined to tune the control gains. Then, a new multi-objective optimization algorithm is utilized to promote the proposed control scheme. This optimization algorithm is a combination of Simulated Annealing (SA) and Artificial Bee Colony (ABC) approaches benefiting advantages of the non-dominated Pareto solutions. To evaluate the capabilities of the suggested algorithm, its optimal solutions of several standard test functions are compared with those of five renowned multi-objective optimization algorithms. The results confirm that the proposed hybrid algorithm yields closer non-dominated Pareto solutions to the true optimal Pareto front with shorter runtimes than other algorithms. After selecting proper objective functions, multi-objective optimization of FFSFLC for the ball and wheel system is performed, and the results are compared with previous works. Simulations illustrate that the proposed strategies can accurately converge the system states to the desired conditions and yield superior robustness against disturbance signals in comparison with former studies.

Abstract The rotational inverted pendulum is an interesting subject for some researchers, especially control engineers. Its nonlinear and underactuated characteristic make it quite challenging to stabilize it. Hence, a proper control law is a must to make it stable. Here, in this paper, we present a control law using LQR (Linear-Quadratic Regulator) to stabilize the rotational inverted pendulum. The experiments are carried out by linearizing the model and simulate the response in MATLAB. The results show that the controller succeeds to stabilize the states of rotational inverted pendulum to their respective equilibrium points. Even more, it provides zero settling errors.

This paper presents three types of sliding mode controllers for a magnetic levitation system. First, a proportional-integral sliding mode controller (PI-SMC) is designed using a new switching surface and a proportional plus power rate reaching law. The PI-SMC is more robust than a feedback linearization controller in the presence of mismatched uncertainties and outperforms the SMC schemes reported recently in the literature in terms of the convergence rate and settling time. Next, to reduce the chattering phenomenon in the PI-SMC, a state feedback-based discrete-time SMC algorithm is developed. However, the disturbance rejection ability is compromised to some extent. Furthermore, to improve the robustness without compromising the chattering reduction benefits of the discrete-time SMC, mismatched uncertainties like sensor noise and track input disturbance are incorporated in a robust discrete-time SMC design using multirate output feedback (MROF). With this technique, it is possible to realize the effect of a full-state feedback controller without incurring the complexity of a dynamic controller or an additional discrete-time observer. Also, the MROF-based discrete-time SMC strategy can stabilize the magnetic levitation system with excellent dynamic and steady-state performance with superior robustness in the presence of mismatched uncertainties. The stability of the closed-loop system under the proposed controllers is proved by using the Lyapunov stability theory. The simulation results and analytical comparisons demonstrate the effectiveness and robustness of the proposed control schemes.

Abstract This paper presents three types of sliding mode controllers for a magnetic levitation system. First, a proportional-integral sliding mode controller (PI-SMC) is designed using a new switching surface and a proportional plus power rate reaching law. The PI-SMC is more robust than a feedback linearization controller in the presence of mismatched uncertainties and outperforms the SMC schemes reported recently in the literature in terms of the convergence rate and settling time. Next, to reduce the chattering phenomenon in the PI-SMC, a state feedback-based discrete-time SMC algorithm is developed. However, the disturbance rejection ability is compromised to some extent. Furthermore, to improve the robustness without compromising the chattering reduction benefits of the discrete-time SMC, mismatched uncertainties like sensor noise and track input disturbance are incorporated in a robust discrete-time SMC design using multirate output feedback (MROF). With this technique, it is possible to realize the effect of a full-state feedback controller without incurring the complexity of a dynamic controller or an additional discrete-time observer. Also, the MROF-based discrete-time SMC strategy can stabilize the magnetic levitation system with excellent dynamic and steady-state performance with superior robustness in the presence of mismatched uncertainties. The stability of the closed-loop system under the proposed controllers is proved by using the Lyapunov stability theory. The simulation results and analytical comparisons demonstrate the effectiveness and robustness of the proposed control schemes.

This paper presents three types of sliding mode controllers for a magnetic levitation system. First, a proportional-integral sliding mode controller (PI-SMC) is designed using a new switching surface and a proportional plus power rate reaching law. The PI-SMC is more robust than a feedback linearization controller in the presence of mismatched uncertainties and outperforms the SMC schemes reported recently in the literature in terms of the convergence rate and settling time. Next, to reduce the chattering phenomenon in the PI-SMC, a state feedback-based discrete-time SMC algorithm is developed. However, the disturbance rejection ability is compromised to some extent. Furthermore, to improve the robustness without compromising the chattering reduction benefits of the discrete-time SMC, mismatched uncertainties like sensor noise and track input disturbance are incorporated in a robust discrete-time SMC design using multirate output feedback (MROF). With this technique, it is possible to realize the effect of a full-state feedback controller without incurring the complexity of a dynamic controller or an additional discrete-time observer. Also, the MROF-based discrete-time SMC strategy can stabilize the magnetic levitation system with excellent dynamic and steady-state performance with superior robustness in the presence of mismatched uncertainties. The stability of the closed-loop system under the proposed controllers is proved by using the Lyapunov stability theory. The simulation results and analytical comparisons demonstrate the effectiveness and robustness of the proposed control schemes.

The main goal of the research is to design an efficient controller for a dynamic positioning system for autonomous surface ships using the backstepping technique for the case of full-state feedback in the presence of unknown external disturbances. The obtained control commands are distributed to each actuator of the overactuated vessel via unconstrained control allocation. The numerical hydrodynamic model of CyberShip I and the model of environmental disturbances are applied to simulate the operation of the ship control system using the time domain analysis. Simulation studies are presented to illustrate the effectiveness of the proposed controller and its robustness to external disturbances.

ABSTRAKMakalah ini memberikan analisis perbandingan antara teknik kendali klasik yaitu kendali PID dengan teknik kendali modern pada sistem Eddy current brakes dinamometer. Eddy current brakes merupakan sistem pengereman modern yang membutuhkan sebuah sistem kendali untuk menunjang kinerja pengereman. Selama ini kendali PID lebih sering digunakan, namun di beberapa kondisi dinilai kurang optimal. Dengan demikian, diperlukan pengembangan kendali yang modern dan optimal yaitu full state feedback Linear Quadratic Regulator (LQR). Perbandingan respon waktu pengereman disimulasikan menggunakan Matlab/Simulink. Hasil simulasi menunjukkan respon waktu pengereman pada kendali LQR lebih baik dibandingkan dengan kendali PID, dengan Ts = 2.12 detik, Tr = 1.18 detik, dan tanpa overshoot. Adapun kendali PID, meskipun menghasilkan Ts = 0.27 detik dan Tr = 0.18 detik, namun demikian masih terdapat overshoot sebesar 0.7%.Kata kunci: Eddy brakes, PID, LQR, Matlab ABSTRACTThis paper provides a comparative analysis between PID control as a classical control technique and modern control technique in the dinamometer Eddy current brakes system. Eddy current brakes is a modern braking system that requires a control system to support the braking performance. PID control is often used to be implemented but in some conditions it is less optimal. Therefore, it is necessary to develop a modern and optimal control, such as a full state feedback Linear Quadratic Regulator (LQR). The comparison of the braking time responses were simulated using Matlab/Simulink. The simulation results show that the response of LQR control is better than the PID, with Ts = 2.12 seconds, Tr = 1.18 seconds, and without overshoot. On the other side, PID control, although having Ts = 0.27 seconds and Tr = 0.18 seconds, there is still an overshoot about 0.7%.Keywords: Eddy brakes, PID, LQR, Matlab