insoluble salt
Recently Published Documents

Current solid potentiometric ion sensors mostly rely on polymeric-membrane-based, solid-contact, ion-selective electrodes (SC-ISEs). However, anion sensing has been a challenge with respect to cations due to the rareness of anion ionophores. Classic metal/metal insoluble salt electrodes (such as Ag/AgCl) without an ion-selective membrane (ISM) offer an alternative. In this work, we first compared the two types of SC-ISEs of Cl− with/without the ISM. It is found that the ISM-free Ag/AgCl electrode discloses a comparable selectivity regarding organic chloride ionophores. Additionally, the electrode exhibits better comprehensive performances (stability, reproducibility, and anti-interference ability) than the ISM-based SC-ISE. In addition to Cl−, other Ag/AgX electrodes also work toward single and multi-valent anions sensing. Finally, a flexible Cl− sensor was fabricated for on-body monitoring the concentration of sweat Cl− to illustrate a proof-of-concept application in wearable anion sensors. This work re-emphasizes the ISM-free SC-ISEs for solid anion sensing.

The aim of the study was to evaluate the performance of six commercially available universal dental adhesives: Adhese Universal (ADU), All-Bond Universal (ABU), Clearfil Universal Bond Quick (CBQ), G-Premio Bond (GPB), Prelude One (PRO) and Scotchbond Universal (SBU). The properties tested were: (a) degree of C=C conversion (DC%); (b) Vickers micro-hardness (VHN); (c) extent of oxygen inhibition (OI/μm), all related with the adhesive film properties; (d) extent of dentin demineralisation (DM%), insoluble salt formation (AS%); and (e) shear bond strength (SBS, self-etch mode) related to the adhesive-dentin interactions. Statistical analysis (α = 0.05) was performed by one-way ANOVA and Tukey’s test (DC%, VHN, OI, DM% AS%) and Weibull analysis (SBS, σ0-β). The DC ranged from 67.2–82.5% (all >GPB), OI from 5.6–18.6 μm (SBU > ADU, GPB, ABU > CBQ > PRO), microhardness from 1.1–6.6 VHN (SBU > ADU > ABU > CBQ > PRO > GPB: not measurable), DM from 69.3% (GPB) to 16–12.5% (CBQ, SBU, ADU) and 13.2–10.6% (ABU, ADU, PRO), in homogeneous groups and AS from 26–15.9% (ABU, CBQ > GPB, PRO, ADU, SBU). For SBS the σ0 (characteristic life) ranged from 29.3–16.6 MPa (CBQ, ADU, ABU, SBU > PRO > GPB), the β (reliability) from 5.1–9.7 (p > 0.05). All failure modes were of mixed type (adhesive and composite cohesive). Although all these adhesives were based on the 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) adhesive monomer, the different co-monomers, solvents and catalysts led to variations in their film properties, reactivity and bonding capacity with dentin.

Master Valentim’s fountain became an important historical patrimony for Brazil, being portrayed by famous artists among them Jean-Baptiste Debret. In 1938, it was registered as cultural heritage by the Brazilian National Historical and Artistic Heritage Institute (IPHAN), and in 1990 it was subjected to excavation and restoration works. The fountain was built in Gneiss and Lioz limestone, with metallic plates and mortar connecting the Gneiss blocks. Currently, deteriorations in the fountain stones can be observed such as light stains and some aesthetic modifications caused by inadequate restorations. Petrography, XRF, XRD, Physical Properties, Colorimetry, Electrical Conductivity, ICP-OES, SEM-EDX, and TGA were performed in order to characterize the Gneiss blocks, the metallic plates, the stones used in previous restorations, as well as light stains observed on the Gneiss blocks. The petrography and XRD analyses inferred that light stains may have been caused by the formation of an insoluble salt as a result of the association of the lead from the plates with other elements. The XRD analysis on the light staining area indicated presence of cerussite (PbCO3), and anglesite (PbSO4), which are the probable cause of the light stains. The SEM-EDX results suggested that sulfur is the main element associated to lead.

Oxalic acid (OA), naturally available in many fruits and vegetables, reacts easily with Ca2+ and Mg2+ ions to produce an insoluble salt.

In this paper the conductometric titration of propranolol hydrochloride in pharmaceutical formulations using silver nitrate as titrant is proposed. The method was based on the formation of an insoluble salt (AgCl(s)) between the chloride of propranolol hydrochloride molecule and Ag(I) ions of the titrant AgNO3. The effect of the PROP-AgNO3 concentrations and the interval of time between the successive additions of the titrant on the shape of the titration curve were studied. The obtained recoveries for four samples ranged from 96.8 to 105%. The proposed method was successfully applied in the determination of propranolol hydrochloride in several pharmaceutical formulations, with results in close agreement at a 95 % confidence level with those obtained using official spectrophotometric method.

In this paper the conductometric titration of propranolol hydrochloride in pharmaceutical formulations using silver nitrate as titrant is proposed. The method was based on the formation of an insoluble salt (AgCl(s)) between the chloride of propranolol hydrochloride molecule and Ag(I) ions of the titrant AgNO3. The effect of the PROP-AgNO3 concentrations and the interval of time between the successive additions of the titrant on the shape of the titration curve were studied. The obtained recoveries for four samples ranged from 96.8 to 105%. The proposed method was successfully applied in the determination of propranolol hydrochloride in several pharmaceutical formulations, with results in close agreement at a 95 % confidence level with those obtained using official spectrophotometric method.

A new method for determining chlorinity of water was developed in order to improve the old method by alleviating the environmental problems associated with the toxic chromate. The method utilizes a mediator, a weak acid that can form an insoluble salt with the titrant. The mediator triggers a sudden change in pH at an equivalence point in a titration. Thus, the equivalence point can be determined either potentiometrically (using a pH meter) or simply with an acid-base indicator. Three nontoxic mediators (phosphate, EDTA, and sulfite) were tested, and optimal conditions for the sharpest pH changes were sought. A combination of phosphate (a mediator) and phenolphthalein (an indicator) was found to be the most successful. The choices of the initial pH and the concentration of the mediator are critical in this approach. The optimum concentration of the mediator isca.1~2 mM, and the optimum value of the initial pH isca.9 for phosphate/phenolphthalein system. The method was applied to a sample of sea water, and the results are compared with those from the conventional Mohr-Knudsen method. The new method yielded chlorinity of a sample of sea water of (17.58 ± 0.22) g/kg, which is about 2.5% higher than the value (17.12 ± 0.22) g/kg from the old method.