Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 218 views

    Tolerances

    Uploaded by

    Adithya Shourie
    The document outlines general tolerances for linear and angular dimensions according to IS:2102-1993. It provides tables specifying permissible machining variations for linear dimensions based on part size and tolerance classification (fine, medium, coarse, very coarse). Angular dimension tolerances are also specified based on the length of the shorter side. Additional tables provide tolerances for diameters of shafts and holes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Tolerances

    Uploaded by

    Adithya Shourie
    218 views2 pages
    The document outlines general tolerances for linear and angular dimensions according to IS:2102-1993. It provides tables specifying permissible machining variations for linear dimensions based on part size and tolerance classification (fine, medium, coarse, very coarse). Angular dimension tolerances are also specified based on the length of the shorter side. Additional tables provide tolerances for diameters of shafts and holes.

    Original Description:

    tolerances

    Original Title

    tolerances

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document outlines general tolerances for linear and angular dimensions according to IS:2102-1993. It provides tables specifying permissible machining variations for linear dimensions based on part size and tolerance classification (fine, medium, coarse, very coarse). Angular dimension tolerances are also specified based on the length of the shorter side. Additional tables provide tolerances for diameters of shafts and holes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    218 views2 pages

    Tolerances

    Uploaded by

    Adithya Shourie
    The document outlines general tolerances for linear and angular dimensions according to IS:2102-1993. It provides tables specifying permissible machining variations for linear dimensions based on part size and tolerance classification (fine, medium, coarse, very coarse). Angular dimension tolerances are also specified based on the length of the shorter side. Additional tables provide tolerances for diameters of shafts and holes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    General tolerances

    General tolerances
    For linear and angular dimensions
    The following table describes permissible machining variation, wherever not specified, as per IS:2102-1993
    Part 1.
    Linear Dimensions
    Fine
    Medium
    0.5 - 3*
    0.05
    0.1
    >3-6
    0.05
    0.1
    > 6 - 30
    0.10
    0.2

    >30 - 120
    0.15
    0.3
    .
    >120 - 400
    0.20
    0.5
    > 400 - 1000
    0.30
    0.8
    > 1000 - 2000
    0.50
    1.2
    > 2000 - 4000
    2.0
    External Radii and Chamfer Heights
    0.5 - 3*
    0.2
    0.2
    >3-6
    0.5
    0.5
    >6
    1.0
    1.0
    Angular Dimensions
    Length of Shorter Side Tolerance
    up to 10
    10
    10
    00 30'
    00 20'
    00 10'
    00 5'

    > 10 - 50
    > 50 - 120
    > 120 - 400
    > 400

    00 30'
    00 20'
    00 10'
    00 5'

    Coarse
    0.2
    0.3
    0.5
    0.8
    1.2
    2.0
    3.0
    4.0

    Very Coarse
    0.5
    1.0
    1.5
    2.5
    4.0
    6.0
    8.0

    0.4
    1.0
    2.0

    0.4
    1.0
    2.0

    10 30'
    10
    00 30'
    00 15'
    00 10'

    30
    20
    10
    00 30'
    00 20'

    Values specified are in mm.


    * For nominal sizes below 0.5 mm, the deviation shall be indicated adjacent to the relevant nominal size (s)

    Diameter range in mm
    3
    > 3 to 6
    > 6 to 10
    > 10 to 18
    > 18 to 30
    > 30 to 50

    h5

    For shafts
    h6
    h9

    0
    -4
    0
    -5
    0
    -6
    0
    -8
    0
    -9
    0
    -11

    0
    -6
    0
    -8
    0
    -9
    0
    -11
    0
    -13
    0
    -16

    http://widiaindia.com/finalwidia/wid226.htm[25-01-2013 14:48:28]

    0
    -25
    0
    -30
    0
    -36
    0
    -43
    0
    -52
    0
    -62

    h11

    H6

    For Holes
    H7
    H8

    0
    -60
    0
    -75
    0
    -90
    0
    -110
    0
    -130
    0
    -160

    +6
    0
    +8
    0
    +9
    0
    +11
    0
    +13
    0
    +16
    0

    +10
    0
    +12
    0
    +15
    0
    +18
    0
    +21
    0
    +25
    0

    +14
    0
    +18
    0
    +22
    0
    +27
    0
    +33
    0
    +39
    0

    H11
    +60
    0
    +75
    0
    +90
    0
    +110
    0
    +130
    0
    +160
    0

    General tolerances

    > 50 to 80
    > 80 to 120
    > 120 to180
    > 180 to 250
    > 250 to 315
    > 315 to 400
    >400 to 500

    0
    -13
    0
    -15
    0
    -18
    0
    -20
    0
    -23
    0
    -25
    0
    -27

    0
    -19
    0
    -22
    0
    -25
    0
    -29
    0
    -32
    0
    -36
    0
    -40

    Value of deviation in microns ( 1 = 0.001 mm)

    http://widiaindia.com/finalwidia/wid226.htm[25-01-2013 14:48:28]

    0
    -74
    0
    -87
    0
    -100
    0
    -115
    0
    -130
    0
    -140
    0
    -155

    0
    -190
    0
    -220
    0
    -250
    0
    -290
    0
    -320
    0
    -360
    0
    -400

    +19
    0
    +22
    0
    +25
    0
    +29
    0
    +32
    0
    +36
    0
    +40
    0

    +30
    0
    +35
    0
    +40
    0
    +46
    0
    +52
    0
    +57
    0
    +63
    0

    +46
    0
    +54
    0
    +63
    0
    +72
    0
    +81
    0
    +89
    0
    +97
    0

    +190
    0
    +220
    0
    +250
    0
    +290
    0
    +320
    0
    +360
    0
    +400
    0

    You might also like