Electrical Design Standard

Symbols

ID. NO. ISSUE SHEET DOC.NO.

1 1 of 40 BN-DS-E2
 DOCUMENT
INDEX SYMBOLS PAGE
NUMBERS
501-502 KEY DIAGRAMS, M. V. AND L. V. 4 - 16
ONE LINE DIAGRAMS
503 CONTROL AND WIRING DIAGRAMS 17 - 28
506 COMMUNICATION SYSTEMS 29
510 POWER LAY-OUTS 30 - 38
520 LIGHTING LAY-OUTS 30 - 38
530 EARTHING LAY-OUTS 30 - 38
550 CATHODIC PROTECTION 30 - 38
LOGIC SYMBOLS 39 - 40

ID. NO. ISSUE SHEET DOC.NO.

1 2 of 40 BN-DS-E2
 NOTES

1. SYMBOLS HAVE BEEN DERIVED FROM IEC PUBLICATION 617, NEN 5152 AND
COMPANY STANDARDS.

EXAMPLE ON SYMBOLS.

PUBLICATION EXAMPLE

IEC 617 : 03-01-02 A

123
IEC COMPANY SEQUENCE INDEX

NEN 5152 : NEN-K-13

NON STANDARD (NORM) : NS-52

2. ALL SYMBOLS MAY BE DRAWN IN ANY POSITION, THE INSCRIPTIONS SHALL

REMAIN, HOWEVER IN THE UPRIGHT POSITION.
EXCEPTION ARE:

A. RELAYS, CONTACTS AND SWITCHES SHALL BE SHOWN SUCH THAT THE

MODE OF OPERATION IS FROM LEFT TO RIGHT OR FROM BOTTOM TO
TOP.

B. INSCRIPTION ON CIRCUIT AND CABLES SHALL BE WRITTEN ALONG THE

SYMBOLS AND SHALL BE READ FROM LEFT TO RIGHT OR FROM BOTTOM
TO TOP.

3. CONTACTS OF ELECTRICAL OPERATED DEVICES SHALL BE SHOWN IN THE DE-

ENERGIZED POSITION.
SWITCHES SHALL BE DRAWN IN THE OFF-POSITION OR NOT-ACTIVATED (NO
PRESSURE, FLOW, ETC.)

ID. NO. ISSUE SHEET DOC.NO.

1 3 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

07-13-02 CONTACTOR

07-13-05 CIRCUIT BRACHER

07-13-02 DISCONNECTOR (ISOLATOR)

OFF LOAD

07-13-08 SWITCH-DISCONNECTOR
ON LOAD

07-21-08 FUSE-DISCONNECTOE
OFF LOAD

07-21-09 FUSE SWITCH-DISCONNECTOR

ON LOAD

07-14-04 VOLTAGE INDICATOR

CAPACITIVE

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
COMPANY DOCUMENT NS 501-502.

ID. NO. ISSUE SHEET DOC.NO.

8 4 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NEN-B-45A SINGLE-POLE SWITCH

NEN-B-45B TWO-POLE SWITCH

NEN-B-45C THREE-POLE SWITCH

NEN-B-45D TWO-POLE SWITCH WITH SWITCHED

NEUTRAL CONDUCTOR

NEN-B-45F FOUR-POLE SWITCH WITH SWITCHED

NEUTRAL CONDUCTOR

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
COMPANY DOCUMENT NS 501-502.

ID. NO. ISSUE SHEET DOC.NO.

8 5 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL
DELAYED ACTION IN DIRECTION
02-12-05 OF MOVEMENT FROM THE ARC
TOWARDS ITS CENTRE (DELAYED CLOSING)

DELAYED ACTION IN DIRECTION

02-12-06 OF MOVEMENT FROM THE ARC
TOWARDS ITS CENTRE (DELAYED OPENING)

02-12-17 MECHANICAL COUPLING

DISENGAGED

02-12-18 MECHANICAL COUPLING

ENGAGED

02-12-20B OPERATED BY BRAKE

02-13-01 MANUAL OPERATED CONTROL,

GENERAL CASE

02-13-08 EMERGENCY SWITCH

(MUSHROOM-TYPE)

02-13-09 OPERATED BY HANDWHEEL

02-13-11 OPERATED BY LEVER

02-13-12 OPERATED BY REMOVABLE

HANDLE

02-13-13 OPERATED BY KEY

02-13-14 OPERATED BY CRANK

NOTE: ONLY ACTION IS DESCRIPTED AND A SWITCH IS

SHOWN FOR CLARIFICATION.
SYMBOL CAN ALSO BE USED FOR CIRCUIT
BREACKERS, ISOLATORS A.S.O.

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
COMPANY DOCUMENT NS 501-502.

ID. NO. ISSUE SHEET DOC.NO.

8 6 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

02-13-15 OPERATED BY ROLLER

02-13-16 OPERATED BY CAM

W
02-13-20 OPERATED BY SPRING

OPERATED BY PNEUMATIC
02-13-21 OR HYDRAULIC CONTROL,
SINGLE ACTING

OPERATED BY PNEUMATIC
02-13-22 OR HYDRAULIC CONTROL,
DOUBLE ACTING

02-13-23 OPERATED BY ELECTROMAGNETIC

ACTUATOR

M
02-13-26 OPERATED BY ELECTRIC MOTOR

02-13-27 OPERATED BY ELECTRIC CLOCK

02-14-01 CONTROL BY FLUID LEVEL

02-14-03 CONTROL BY FLOW

NEN-J-92 OPERATED BY PEDAL

NOTE: ONLY ACTION IS DESCRIPTED AND A SWITCH IS

SHOWN FOR CLARIFICATION.
SYMBOL CAN ALSO BE USED FOR CIRCUIT
BREACKERS, ISOLATORS A.S.O.

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
COMPANY DOCUMENT NS 501-502.

ID. NO. ISSUE SHEET DOC.NO.

8 7 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NEN-J-98 OPERATED BY CENTRIFUGAL FORCE

NEN-J-102 OPERATED BY BIMETAL

NS-01 HAND RESET

07-09-01B TEMPERATURE SENSITIVE SWITCH

NEN-J-61 MAGNETIC OVERCURRENT

PROTECTION

NEN-J-62 THERMAL OVERCURRENT

PROTECTION

NEN-J-61-62 THERMAL AND MAGNETIC

OVERCURRENT PROTECTION

NEN-J-74 GROUNDFAULT PROTECTION

NEN-J-76 UNDER VOLTAGE PROTECTION

02-12-07 AUTOMATIC RETURN (THE TRIANGLE IS

POINTED IN THE RETURN DIRECTION)

02-12-11 MECHANICAL INTERLOCK

BETWEEN TWO DEVICES

02-12-12 LATCHING DEVICE

NOTE: ONLY ACTION IS DESCRIPTED AND A SWITCH IS

SHOWN FOR CLARIFICATION.
SYMBOL CAN ALSO BE USED FOR CIRCUIT
BREACKERS, ISOLATORS A.S.O.

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
COMPANY DOCUMENT NS 501-502.

ID. NO. ISSUE SHEET DOC.NO.

8 8 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

07-16-01A

07-16-01B MEASURING RELAY OR

RELATED DEVICE

07-16-01C

02-08-05 INDEPENDENT TIME-LAG

07-16-11 INVERSE TIME-LAG

CHARACTERISTIC (IDMT)

07-16-03 RESIDUAL VOLTAGE U rsd

07-17-07 UNDERVOLTAGE U<

07-16-04 REVERSE CURRENT I

07-16-05 DIFFERENTIAL CURRENT Id

07-16-06 PERCENTAGE DIFFERENTIAL CURRENT

Id/I

07-16-07 EARTH FAULT CURRENT

I

07-16-08 CURRENT IN THE I

N
NEUTRAL CONDUCTOR

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
COMPANY DOCUMENT NS 501-502.

ID. NO. ISSUE SHEET DOC.NO.

8 9 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

07-17-04B INSTANTANEOUS OVERCURRENT I >>

07-17-04 OVERCURRENT I >

07-17-03 UNDERPOWER I
P<

NEN-K-13 REVERSE POWER P

NEN-K-21 MINIMUM IMPEDANCE Z<

07-17-13 LOCKED ROTOR n O

NEN-K-17 TIME t

07-09-01 TEMPERATURE

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
COMPANY DOCUMENT NS 501-502.

ID. NO. ISSUE SHEET DOC.NO.

8 10 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

06-09-01 TRANSFORMER WITH TWO WINDINGS

06-10-05 VARIABLE VOLTAGE TRANSFORMER

06-09-06 AUTO-TRANSFORMER

06-09-08 CHOKE / REACTOR

06-09-01B VOLTAGE TRANSFORMER

06-09-10 CURRENT TRANSFORMER

06-13-04 CURRENT TRANSFORMER WITH TWO

SECONDARY WINDINGS ON THE CORE

NS-41 CORE BALANCE CURRENT

TRANSFORMER

06-02-02 OPEN VEE WINDING, V (60)

06-02-05 THREE-PHASE WINDING, DELTA

06-02-07 THREE-PHASE WINDING, STAR

06-02-08 THREE-PHASE WINDING, STAR,

WITH NEUTRAL BROUGHT OUT

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
COMPANY DOCUMENT NS 501-502.

ID. NO. ISSUE SHEET DOC.NO.

8 11 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

06-02-09 THREE-PHASE WINDING, ZIGZAG OR

INTERCONNECTED STAR

THREE-PHASE WINDING, ZIGZAG OR

06-02-09B INTERCONNECTED STAR, WITH
NEUTRAL BROUGHT OUT

08-04-03 KILO WATT-HOUR METER

kWh

08-04-15 KILO VAR-HOUR METER

kvarh

08-03-01 RECORDING WATTMETER W

08-02-01 VOLTMETER V

08-02-02 AMMETER A

08-02-03 VARMETER var

NEN-N-8 WATTMETER W

08-02-05 POWER-FACTOR METER cos

08-02-07 FREQUENCY METER Hz

V
NEN-N-6A VOLTMETER WITH 6 POSITIONS SWITCH
(NO OFF POSITION)
6

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
COMPANY DOCUMENT NS 501-502.

ID. NO. ISSUE SHEET DOC.NO.

8 12 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

08-02-08 SYNCHRONOSCOPE

08-02-14 TEMPERATURE

08-08-01 CLOCK

08-05-02 PULSE METER, COUNTING DEVICE

NEN-D-12 TERMINAL

03-03-06 PLUG AND SOCKET (MALE

AND FEMALE)

03-03-17 CONNECTING LINK, CLOSED

03-03-19 CONNECTING LINK, CLOSED

02-02-03 DIRECT CURRENT

02-02-04 ALTERNATING CURRENT

NEN-C-18 BUSDUCT

NEN-D-36A CABLE CONNECTION

NEN-D-39 CABLE GLAND

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
COMPANY DOCUMENT NS 501-502.

ID. NO. ISSUE SHEET DOC.NO.

8 13 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NS-03 TURBINE T

NS-04 DIESEL D

06-04-01A GENERATOR G

06-04-01B MOTOR M

06-04-01C MOTOR WITH WINDING M

TEMPERATURE DETECTOR

02-17-06 CHARGER / CONVERTER

06-14-03 RECTIFIER

06-14-05 INVERTER

06-14-04 RECTIFIER IN FULL WAVE

(BRIDGE) CONNECTION

06-15-03A BATTERY OF ACCUMULATORS

OR PRIMARY CELLS

04-02-01A CAPACITOR

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
COMPANY DOCUMENT NS 501-502.

ID. NO. ISSUE SHEET DOC.NO.

8 14 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

03-01-02A ONE-CONDUCTOR

03-01-02B NEUTRAL CONDUCTOR

03-01-02C PROTECTIVE CONDUCTOR

03-01-02D TWO-CONDUCTORS

03-01-02E ONE-CONDUCTOR WITH

NEUTRAL CONDUCTOR

03-01-02G THREE-CONDUCTORS

03-01-02H ONE-CONDUCTOR WITH NEUTRAL

CONDUCTOR AND PROTECTIVE CONDUCTOR

03-01-02 I TWO-CONDUCTORS WITH

NEUTRAL CONDUCTOR

03-01-02 J TWO-CONDUCTORS WITH

PROTECTIVE CONDUCTOR

03-01-02K TWO-CONDUCTORS WITH NEUTRAL

CONDUCTOR AND PROTECTIVE CONDUCTOR

03-01-02L THREE-CONDUCTORS WITH

NEUTRAL CONDUCTOR

03-01-02M THREE-CONDUCTORS WITH

PROTECTIVE CONDUCTOR

03-01-02N THREE-CONDUCTORS WITH NEUTRAL

CONDUCTOR AND PROTECTIVE CONDUCTOR

NOTE: WIRE IS ONLY SHOWN FOR CLARIFICATIONS.

SYMBOLS CAN ALSO BE USED FOR POWER LAY-OUTS.

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
BADGER DOCUMENT NS 501-502-510

ID. NO. ISSUE SHEET DOC.NO.

8 15 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NS-09 ONE FUSE

NS-10 TWO FUSES

NS-11 THREE FUSES

NS-12 ONE VOLTMETER V

NS-13 TWO VOLTMETERS V

NS-14 THREE VOLTMETERS V

NOTE: SYMBOLS ONLY SHOWN FOR CLARIFICATION

SYMBOL FOR KEY DIAGRAM, M.V.

AND L.V. ONE LINE DIAGRAMS
COMPANY DOCUMENT NS 501-502

ID. NO. ISSUE SHEET DOC.NO.

8 16 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

07-02-02 MAKE CONTACT / SWITCH

07-13-02 CONTACTOR (CONTACT OPEN IN

THE DEENERGIZED POSITION)

07-13-05 CIRCUIT BREAKER

07-13-06 DISCONNECTOR (ISOLATOR)

OFF LOAD

07-13-08 SWITCH-DISCONNECTOR
ON LOAD

07-21-08 FUSE-DISCONNECTOR

07-21-09 FUSE SWITCH-DISCONNECTOR

(ON-LOAD ISOLATING FUSE-SWITCH)

07-02-03 BREAK CONTACT

07-02-05 TWO-WAY CONTACT WITH

CENTRE-OFF POSITION

07-02-04 CHANGE-OVER CONTACT

SYMBOL FOR CONTROL AND

WIRING DIAGRAMS COMPANY
DOCUMENT NS 503

ID. NO. ISSUE SHEET DOC.NO.

8 17 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL
DELAYED ACTION IN DIRECTION OF
02-12-05 MOVEMENT FROM THE ARC TOWARDS
ITS CENTRE (DELAYED CLOSING)

DELAYED ACTION IN DIRECTION OF

02-12-06 MOVEMENT FROM THE ARC TOWARDS
ITS CENTRE (DELAYED OPENING)

02-12-17 MECHANICAL COUPLING,

DISENGAGED

02-12-18 MECHANICAL COUPLING,

ENGAGED

02-12-20B OPERATED BY BRAKE

02-13-01 MANUALLY OPERATED CONTROL,

GENERAL CASE

02-13-08 EMERGENCY SWITCH

(MUSHROOM-TYPE)

02-13-09 OPERATED BY HANDWHEEL

02-13-11 OPERATED BY LEVER

02-13-12 OPERATED BY REMOVABLE

HANDLE

02-13-13 OPERATED BY KEY

02-13-14 OPERATED BY CRANK

NOTE: ONLY ACTION IS DESCRIPTED AND A SWITCH

IS SHOWN FOR CLARIFICATION.
SYMBOL CAN ALSO BE USED FOR CIRCUIT
BREACKERS, ISOLATORS A.S.O.
SYMBOL FOR CONTROL AND
WIRING DIAGRAMS COMPANY
DOCUMENT NS 503

ID. NO. ISSUE SHEET DOC.NO.

8 18 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

02-13-15 OPERATED BY ROLLER

02-13-16 OPERATED BY CAM

W
02-13-20 OPERATED BY SPRING

OPERATED BY PNEUMATIC
02-13-21 OR HYDRAULIC CONTROL,
SINGLE ACTING

OPERATED BY PNEUMATIC
02-13-22 OR HYDRAULIC CONTROL,
DOUBLE ACTING

02-13-23 OPERATED BY ELECTROMAGNETIC

ACTUATOR

M
02-13-26 OPERATED BY ELECTRICAL MOTOR

02-13-27 OPERATED BY ELECTRICAL CLOCK

02-14-01 CONTROL BY FLUID LEVEL

02-14-03 CONTROL BY FLOW

NEN-J-92 OPERATED BY PEDAL

NOTE: ONLY ACTION IS DESCRIPTED AND A SWITCH

IS SHOWN FOR CLARIFICATION.
SYMBOL CAN ALSO BE USED FOR CIRCUIT
BREACKERS, ISOLATORS A.S.O.

SYMBOL FOR CONTROL AND

WIRING DIAGRAMS COMPANY
DOCUMENT NS 503

ID. NO. ISSUE SHEET DOC.NO.

8 19 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NEN-J-98 OPERATED BY CENTRIFUGAL FORCE

NEN-J-102 OPERATED BY BIMETAL

NS-01 LOCKING DEVICE, HAND RESET

07-09-01B TEMPERATURE SENSITIVE SWITCH

NEN-J-61 MAGNETIC OVERCURRENT

PROTECTION

NEN-J-62 THERMAL OVERCURRENT

PROTECTION

NEN-J-61-62 THERMAL AND MAGNETIC

OVERCURRENT PROTECTION

NEN-J-74 GROUNDFAULT PROTECTION

NEN-J-76 UNDER VOLTAGE PROTECTION

02-12-07 AUTOMATIC RETURN (THE TRIANGLE IS

POINTED IN THE RETURN DIRECTION)

02-12-11 MECHANICAL INTERLOCK

BETWEEN TWO DEVICES

02-12-12 LATCHING DEVICE

NOTE: ONLY ACTION IS DESCRIPTED AND A SWITCH

IS SHOWN FOR CLARIFICATION.
SYMBOL CAN ALSO BE USED FOR CIRCUIT
BREACKERS, ISOLATORS A.S.O.
SYMBOL FOR CONTROL AND
WIRING DIAGRAMS COMPANY
DOCUMENT NS 503

ID. NO. ISSUE SHEET DOC.NO.

8 20 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NS-20 ROTARY SWITCH

CONTACT POSITION LEFT

NS-21 ROTARY SWITCH

CONTACT POSITION LEFT AND CENTER

NS-22 ROTARY SWITCH

CONTACT POSITION LEFT AND RIGHT

NS-23 ROTARY SWITCH

CONTACT POSITION CENTER AND RIGHT

NS-24 ROTARY SWITCH

CONTACT POSITION CENTER

NS-25 ROTARY SWITCH

CONTACT POSITION RIGHT

NS-26 ROTARY SWITCH

CONTACT POSITION LEFT AND RIGHT

NS-27 ROTARY SWITCH CONTACT

NS-28 ROTARY SWITCH

RIGHT SLIDING CONTACT

NS-29 ROTARY SWITCH

LEFT SLIDING CONTACT

ROTARY SWITCH
SPRING RETURN
FROM START
START
AUTO
OFF

PADLOCKABLE
IN OFF
POSITION

SYMBOL FOR CONTROL AND

WIRING DIAGRAMS COMPANY
DOCUMENT NS 503

ID. NO. ISSUE SHEET DOC.NO.

8 21 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NS-30 PADLOCKABLE
IN LEFT POSITION

NS-31 PADLOCKABLE
IN CENTER POSITION

NS-32 PADLOCKABLE
IN RIGHT POSITION

NS-34 ROTARY SWITCH

NS-35 ROTARY SWITCH

LEFT SPRING RETURN

NS-36 ROTARY SWITCH

RIGHT SPRING RETURN

NS-37 ROTARY SWITCH

LEFT & RIGHT SPRING RETURN

NS-43 SELECTOR SWITCH

SYMBOL FOR CONTROL AND

WIRING DIAGRAMS COMPANY
DOCUMENT NS 503

ID. NO. ISSUE SHEET DOC.NO.

8 22 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

07-16-01A

07-16-01B MEASURING RELAY OR

RELATED DEVICE

07-16-01C

02-08-05 INDEPENDENT TIME-LAG

07-16-11 INVERSE TIME-LAG

CHARACTERISTIC (IDMT)

07-16-03 RESIDUAL VOLTAGE U rsd

07-17-07 UNDERVOLTAGE U<

07-16-04 REVERSE CURRENT I

07-16-05 DIFFERENTIAL CURRENT Id

07-16-06 PERCENTAGE DIFFERENTIAL CURRENT

Id/I

07-16-07 EARTH FAULT CURRENT

I

07-16-08 CURRENT IN THE I

N
NEUTRAL CONDUCTOR

SYMBOL FOR CONTROL AND

WIRING DIAGRAMS COMPANY
DOCUMENT NS 503

ID. NO. ISSUE SHEET DOC.NO.

8 23 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL
<<
I
07-17-04B INSTANTANEOUS OVERCURRENT

<
I
07-17-04 OVERCURRENT

P<
07-17-03 UNDERPOWER

P
NEN-K-13 REVERSE POWER

Z<
NEN-K-21 MINIMUM IMPEDANCE

n~
~0
07-17-13 LOCKED ROTOR

t
NEN-K-17 TIME

07-09-01 TEMPERATURE

07-15-01 OPERATING DEVICE, GENERAL

SYMBOL (RELAY COIL)

07-15-04 OPERATING DEVICE / RELAY COIL

WITH TWO SEPARATE WINDINGS

07-15-07 RELAY COIL OF A TIME DELAYED RELAY

ON DEENERGIZING

07-15-08 RELAY COIL OF A TIME DELAYED RELAY

ON ENERGIZING

NEN-K-38 FLAG-RELAY

SYMBOL FOR CONTROL AND

WIRING DIAGRAMS COMPANY
DOCUMENT NS 503

ID. NO. ISSUE SHEET DOC.NO.

8 24 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

06-09-02 TRANSFORMER WITH TWO WINDINGS

06-09-02B ISOLATION TRANSFORMER

06-10-06 VARIABLE VOLTAGE TRANSFORMER

06-09-07 AUTO-TRANSFORMER

04-03-01 INDUCTOR/COIL/CHOKE/WINDING

06-09-11 CURRENT TRANSFORMER / PULSE

TRANSFORMER

06-13-05 CURRENT TRANSFORMER WITH TWO

SECONDARY WINDINGS ON ONE CORE

NS-40 SHORT CIRCUIT DEVICE

04-03-03 INDUCTOR WITH MAGNETIC CORE

06-03-02 SERIES WINDING

SYMBOL FOR CONTROL AND

WIRING DIAGRAMS COMPANY
DOCUMENT NS 503

ID. NO. ISSUE SHEET DOC.NO.

8 25 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

08-04-03 KILO WATT-HOUR METER

kWh

08-04-15 KILO VAR-HOUR METER kvarh

08-03-01 RECORDING WATTMETER W

08-02-01 VOLTMETER V

08-02-02 AMPMETER A

08-02-04 VARMETER var

08-02-05 POWER-FACTOR METER

08-02-07 FREQUENCY METER Hz

NEN-N-6A VOLTMETER WITH 6 POSITIONS SWITCH 6

08-02-08 SYNCRONOSCOPE

08-02-14 THERMOMETER (PYROMETER)

08-08-01 CLOCK

08-05-02 PULSE METER, COUNTING DEVICE

SYMBOL FOR CONTROL AND

WIRING DIAGRAMS COMPANY
DOCUMENT NS 503

ID. NO. ISSUE SHEET DOC.NO.

8 26 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NEN-D-12 TERMINAL

03-03-06 PLUG AND SOCKET (MALE

AND FEMALE)

03-03-17 CONNECTING LINK, CLOSED

03-03-19 CONNECTING LINK, OPEN

02-02-03 DIRECT CURRENT

02-02-04 ALTERVATING CURRENT

SYMBOL FOR CONTROL AND

WIRING DIAGRAMS COMPANY
DOCUMENT NS 503

ID. NO. ISSUE SHEET DOC.NO.

8 27 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

04-01-01 RESISTOR, GENERAL SYMBOL

04-02-01 CAPACITOR

02-03-01 RESISTOR, VARIABLE, LINEAIR

02-03-04 RESISTOR, VARIABLE, NON-LINEAIR

02-03-05 RESISTOR PRE-SET ADJUSTMENT

04-01-12 HEATING ELEMENT

05-03-01 SEMICONDUCTOR DIODE,

GENERAL SYMBOL

05-03-02 LIGHT EMITTING DIODE,

GENERAL SYMBOL

05-04-04 TRIODE THYRISTOR

TYPE UNSPECIFIED

07-21-01 FUSE HRC

07-21-02 FUSE SCREW TYPE DIAZED

08-10-01 (INCANDESCENT) SIGNAL LAMP

05-14-09 PHOTO CELL

05-14-04 VOLTAGE INDICATOR

CAPACITIVE

SYMBOL FOR CONTROL AND

WIRING DIAGRAMS COMPANY
DOCUMENT NS 503

ID. NO. ISSUE SHEET DOC.NO.

8 28 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

08-10-05 HORN

08-10-06 BELL

08-10-09 SIREN

09-05-01 TELEPHONE SET,

09-09-07 LOUDSPEAKER,

09-05-19 TELEPHONE SET WITH

LOUDSPEAKER

10-04-01 ANTENNA,
GENERAL SYMBOL

10-15-01 AMPLIFIER

11-10-01 LINE POWER UNIT (AC-TYPE) SHOWN

SYMBOL FOR COMMUNICATION

SYSTEMS
COMPANY DOCUMENT NS 506

ID. NO. ISSUE SHEET DOC.NO.

8 29 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NEN-C-5-04 CABLE FLAG FOR MAXIMUM OF

4 CHARACTERS

NEN-C-5-05 CABLE FLAG FOR MAXIMUM OF

5 CHARACTERS

NEN-C-5-06 CABLE FLAG FOR MAXIMUM OF

6 CHARACTERS

NEN-C-5-07 CABLE FLAG FOR MAXIMUM OF

7 CHARACTERS

NEN-C-5-08 CABLE FLAG FOR MAXIMUM OF

8 CHARACTERS

NEN-C-5-09 CABLE FLAG FOR MAXIMUM OF

9 CHARACTERS

NEN-C-5-10 CABLE FLAG FOR MAXIMUM OF

10 CHARACTERS

NEN-C-5-11 CABLE FLAG FOR MAXIMUM OF

11 CHARACTERS

NEN-C-5-12 CABLE FLAG FOR MAXIMUM OF

12 CHARACTERS

NEN-C-5-1 FLAG INDICATION

NEN-C-5-2 FLAG INDICATION

03-04-03 BUNDLE INDICATION

SYMBOL FOR LAY-OUTS

COMPANY DOCUMENT NS 510-
511-520-521-531-550

ID. NO. ISSUE SHEET DOC.NO.

8 30 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NS-05 PACKAGE UNIT PU

NS-06 WELDING UNIT W

NS-15 MOTOR OPERATED VALVE (MOV) M

NS-16 ELECTRICAL DISTRIBUTION PANEL

NS-17 INSTRUMENT PANEL OR BOX

NS-18 JUNCTION BOX JB

03-04-04 STRAIGHT THROUGH JUNCTION BOX

03-04-06 JUNCTION BOX FOR 3 OR 4 CABLES

03-04-06 REMOTE CONTROL STATION

NS-57 SAFETY SWITCH

NS-58 PRIMARY SAFETY SWITCH

NS-58 EMERGENCY PUSH BUTTON

06-04-01B MOTOR M

SYMBOL FOR LAY-OUTS

COMPANY DOCUMENT NS 510-
511-520-521-531-550

ID. NO. ISSUE SHEET DOC.NO.

8 31 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

11-12-01 CABLE OR CONDUIT GOING UPWARDS

11-12-02 CABLE OR CONDUIT GOING DOWNWARDS

NEN-C-46 CABLE OR CONDUIT COMING

FROM DOWNWARDS

NEN-C-47 CABLE OR CONDUIT COMING

FROM UPWARDS

NEN-C-50 CABLE OR CONDUIT PASSING THROUGH

VERTICALLY UPWARDS

NEN-C-51 CABLE OR CONDUIT PASSING THROUGH

VERTICALLY DOWNWARDS

NS-59 ARROW FOR STAIR INDICATION

03-02-01 CONNECTION OF CONDUCTORS

NS-44 ARROW HEAD

SYMBOL FOR LAY-OUTS

COMPANY DOCUMENT NS 510-
511-520-521-531-550

ID. NO. ISSUE SHEET DOC.NO.

8 32 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NEN-J-170 SWITCH, SINGLE POLE

11-14-04 SWITCH, TWO POLE

11-14-05 MULTI-POSITION SWITCH, SINGLE POLE

(TWO CIRCUIT SWITCH)

11-14-07 TWO-WAY SWITCH, SINGLE POLE

11-14-08 INTERMEDIATE SWITCH

11-14-09 DIMMER SWITCH, SINGLE POLE

11-14-09 PULL-CORD SWITCH, SINGLE POLE

11-13-01 SOCKET OUTLET (POWER)

11-13-04 SOCKET OUTLET (POWER) WITH

PROTECTIVE CONTACT

NS-49 SOCKET OUTLET CONNECTED

TO A SAFETY TRANSFORMER

SYMBOL FOR LAY-OUTS

COMPANY DOCUMENT NS 510-
511-520-521-531-550

ID. NO. ISSUE SHEET DOC.NO.

8 33 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NEN-M-24H FLUORESCENT LIGHTING FIXTURE,

2X20W

NEN-M-24I FLUORESCENT LIGHTING

FIXTURE, 2X40W

NEN-M-24J FLUORESCENT LIGHTING FIXTURE,

2X65W

FLUORESCENT LIGHTING FIXTURE,

NEN-M-24K 2X20W
(MOUNTED UNDER PLATFORM)

FLUORESCENT LIGHTING FIXTURE,

NEN-M-24L 2X40W
(MOUNTED UNDER PLATFORM)

FLUORESCENT LIGHTING FIXTURE,

NEN-M-24M 2X65W
(MOUNTED UNDER PLATFORM)

NS-79 FLUORESCENT LIGHTING FIXTURE,

WITH EMERGENCY SUPPLY

05-14-09 PHOTO CELL

NOTE: SYMBOLS TO BE SHOWN ON LAYOUTS

PROVIDED WITH A CODE FOR
IDENTIFICATION

EXAMPLE LIGHTING FIXTURE CODING:

A - 3 - L2

CONNECTED TO PHASE L2
CONNECTED TO CIRCUIT No. 3
FIXTURE MOUNTING IDENTIFICATION

SYMBOL FOR LAY-OUTS

COMPANY DOCUMENT NS 510-
511-520-521-531-550

ID. NO. ISSUE SHEET DOC.NO.

8 34 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

11-15-01 INCANDESCENT OR MERCURY VAPOR

LIGHTING FIXTURE, CEILING MOUNTED

11-15-09 FLOODLIGHT

NS-48 STREET/FENCE LIGHTING FIXTURE,

POLE MOUNTED

NS-50 ELECTRICAL DISTRIBUTION PANEL

NS-51 EMERGENCY HANDLAMP

WITH OWN SOURCE

NS-52 EMERGENCY EXIT (RIGHT) EXIT

NS-53 EMERGENCY EXIT (LEFT) EXIT

NS-54 EMERGENCY EXIT (ABOVE DOOR) EXIT

NS-55 ILLUMINATED LEVELGAUGE

SYMBOL FOR LAY-OUTS

COMPANY DOCUMENT NS 510-
511-520-521-531-550

ID. NO. ISSUE SHEET DOC.NO.

8 35 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

02-15-01 EARTH/GROUND

02-15-02 CLEAN EARTH/GROUND

02-15-03 EARTH ELECTRODE IN PIT

NEN-D-3 EARTH ELECTRODE

NEN-D-2-3 CLEAN EARTH ELECTRODE

NEN-D-4 PILE EARTHING

02-15-04 FRAME/CHASSIS

02-15-05 EQUIPOTENTIAL

07-22-03 LIGHTING ARRESTOR

NS-45 LIGHTING ROD

NS-46 DIVIDING POINT

NS-47 CRIMPIT CONNECTION

NS-69 SPARK GAP

04-03-01 CHOKE

SYMBOL FOR LAY-OUTS

COMPANY DOCUMENT NS 510-
511-520-521-531-550

ID. NO. ISSUE SHEET DOC.NO.

8 36 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NS-16 DISTRIBUTION BOX

RECTIFIER,
NS-60 HAND CONTROLLED
H

RECTIFIER,
NS-61 A
AUTO CONTROLLED

02-15-01 EARTHING

CADWELD CONNECTION
NS-62 AT PIPELINE

NS-63 REFERENCE ELECTRODE

E

NS-64 REFERENCE ELECTRODE IN PIT E

NS-65 MEASURING STATION ON POLE

NS-66 MEASURING STATION IN PIT

ANODE FOR IMPRESSED CURRENT

NS-67 (CHEMICAL SYMBOL INDICATES
THE MATERIAL A Mg

SACRIFICIAL ANODE
NS-68 (CHEMICAL SYMBOL INDICATES A Mg
THE MATERIAL

SYMBOL FOR LAY-OUTS

COMPANY DOCUMENT NS 510-
511-520-521-531-550

ID. NO. ISSUE SHEET DOC.NO.

8 37 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

NS-69 SPARK GAP

NS-70 ISOLATION (GENERAL)

NS-71 ISOLATION FLANGE

NS-72 ISOLATION COUPLING

NS-73 SCREENING PLATE

NS-74 SCREENING CONDUIT

NS-75 VALVE WITH ISOLATION FLANGE

SYMBOL FOR LAY-OUTS

COMPANY DOCUMENT NS 510-
511-520-521-531-550

ID. NO. ISSUE SHEET DOC.NO.

8 38 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL
>1
12-27-01 OR GATE

&
12-27-02 AND GATE

>1
12-28-02 NOR GATE

&
12-28-01 NAND GATE

12-27-11 NEGATOR

12-31-01 SCHMITT TRIGGER

12-44-02 MONOSTABLE ELEMENT, SINGLE SHOT

1
t
DELAY ELEMENT WITH
12-40-01 SPECIFIED DELAY TIMES

12-40-02 DELAY ELEMENT

12-40-02B VARIABLE DELAY ELEMENT

LOGIC SYMBOL

ID. NO. ISSUE SHEET DOC.NO.

8 39 of 40 BN-DS-E2
 CAD NAME DESCRIPTION SYMBOL

10-15-02 AMPLIFIER/REPEATER

12-07-01 NEGATION INDICATOR (INPUT)

12-07-02 NEGATION INDICATOR (OUTPUT)

12-07-03 POLARITY INDICATOR (INPUT)

12-07-04 POLARITY INDICATOR (OUTPUT)

INPUT WHICH DOES NOT CARRY

12-10-01A LOGIC INFORMATION

OUTPUT WHICH DOES NOT CARRY

12-10-01B LOGIC INFORMATION

CONVERSION FROM DEVICE

NS-76 TO LOGIC LEVEL

NS-77 INTERMEDIATE RELAY R

LOGIC SYMBOL

ID. NO. ISSUE SHEET DOC.NO.

8 40 of 40 BN-DS-E2