2N3906 / MMBT3906 / PZT3906

2N3906

MMBT3906
C

PZT3906
C

E C B

E C

TO-92
E

SOT-23
Mark: 2A

SOT-223

PNP General Purpose Amplifier

This device is designed for general purpose amplifier and switching applications at collector currents of 10 A to 100 mA.

Absolute Maximum Ratings*

Symbol
VCEO VCBO VEBO IC TJ, Tstg Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous

TA = 25C unless otherwise noted

Parameter

Value
40 40 5.0 200 -55 to +150

Units
V V V mA C

Operating and Storage Junction Temperature Range

*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3) All voltages (V) and currents (A) are negative polarity for PNP transistors.

Thermal Characteristics
Symbol
PD RJC RJA

TA = 25C unless otherwise noted

Characteristic
Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient 2N3906 625 5.0 83.3 200

Max
*MMBT3906 350 2.8 357 **PZT3906 1,000 8.0 125

Units
mW mW/C C/W C/W

*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06." **Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm2.

2001 Fairchild Semiconductor Corporation

2N3906/MMBT3906/PZT3906, Rev A

2N3906 / MMBT3906 / PZT3906

PNP General Purpose Amplifier

(continued)

Electrical Characteristics
Symbol Parameter

TA = 25C unless otherwise noted

Test Conditions

Min

Max

Units

OFF CHARACTERISTICS
V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX Collector-Emitter Breakdown Voltage* Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Base Cutoff Current Collector Cutoff Current IC = 1.0 mA, IB = 0 IC = 10 A, IE = 0 IE = 10 A, IC = 0 VCE = 30 V, VBE = 3.0 V VCE = 30 V, VBE = 3.0 V 40 40 5.0 50 50 V V V nA nA

ON CHARACTERISTICS
hFE DC Current Gain * IC = 0.1 mA, VCE = 1.0 V IC = 1.0 mA, VCE = 1.0 V IC = 10 mA, VCE = 1.0 V IC = 50 mA, VCE = 1.0 V IC = 100 mA, VCE = 1.0 V IC = 10 mA, IB = 1.0 mA IC = 50 mA, IB = 5.0 mA IC = 10 mA, IB = 1.0 mA IC = 50 mA, IB = 5.0 mA 60 80 100 60 30 300

VCE(sat) VBE(sat)

Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage

0.65

0.25 0.4 0.85 0.95

V V V V

SMALL SIGNAL CHARACTERISTICS

fT Cobo Cibo NF Current Gain - Bandwidth Product Output Capacitance Input Capacitance Noise Figure IC = 10 mA, VCE = 20 V, f = 100 MHz VCB = 5.0 V, IE = 0, f = 100 kHz VEB = 0.5 V, IC = 0, f = 100 kHz IC = 100 A, VCE = 5.0 V, RS =1.0k,f=10 Hz to 15.7 kHz 250 4.5 10.0 4.0 MHz pF pF dB

SWITCHING CHARACTERISTICS
td tr ts tf Delay Time Rise Time Storage Time Fall Time VCC = 3.0 V, VBE = 0.5 V, IC = 10 mA, IB1 = 1.0 mA VCC = 3.0 V, IC = 10mA IB1 = IB2 = 1.0 mA 35 35 225 75 ns ns ns ns

*Pulse Test: Pulse Width 300 s, Duty Cycle 2.0%

NOTE: All voltages (V) and currents (A) are negative polarity for PNP transistors.

Spice Model
PNP (Is=1.41f Xti=3 Eg=1.11 Vaf=18.7 Bf=180.7 Ne=1.5 Ise=0 Ikf=80m Xtb=1.5 Br=4.977 Nc=2 Isc=0 Ikr=0 Rc=2.5 Cjc=9.728p Mjc=.5776 Vjc=.75 Fc=.5 Cje=8.063p Mje=.3677 Vje=.75 Tr=33.42n Tf=179.3p Itf=.4 Vtf=4 Xtf=6 Rb=10)

2N3906 / MMBT3906 / PZT3906

PNP General Purpose Amplifier

(continued)

Typical Characteristics

V CESAT - COLLECTOR EMITTER VOLTAGE (V)

h F E - TYPICAL PULSED CURRENT GAIN

Typical Pulsed Current Gain vs Collector Current

250
V CE = 1 .0V
125 C

Collector-Emitter Saturation Voltage vs Collector Current

0.3 0.25 0.2 0.15 0.1
125C 25 C

= 10

200

150
25 C

100

- 40 C

0.05 0

- 40 C

50 0.1

0.2

0.5 1 2 5 10 20 I C - COLLECTOR CURRE NT (mA)

50

100

10 100 I C - COLLECTOR CURRENT (mA)

200

VBE( ON)- BASE EMITTER ON VOLTAGE (V)

V BESAT - BASE EM ITTE R VOLTAGE (V)

Base-Emitter Saturation Voltage vs Collector Current

1 0.8
25 C

Base Emitter ON Voltage vs Collector Current

1 0.8
- 40 C

= 10
- 40 C

0.6 0.4 0.2 0

125 C

0.6 0.4 0.2 0 0.1

25 C 125 C

V CE = 1V

10 100 I C - COLLECTOR CURRE NT (mA)

200

1 10 I C - COLLECTOR CURRENT (mA)

25

Collector-Cutoff Current vs Ambient Temperature

I CBO - COLLE CTOR CURRENT (nA) 100 V 10
CB

Common-Base Open Circuit Input and Output Capacitance vs Reverse Bias Voltage
10
C obo

= 25V CAPACITANCE (pF)

8 6 4 2 0 0.1
C ibo

0.1

0.01 25

50 75 100 TA - AMBIE NT TEMP ERATURE ( C)

125

1 REVERSE BIAS VOLTAGE (V)

10

2N3906 / MMBT3906 / PZT3906

PNP General Purpose Amplifier

(continued)

Typical Characteristics

(continued)

Noise Figure vs Frequency

6 V CE = 5.0V NF - NOISE FIGURE (dB) 5 4 3 2 1 0 0.1
I C = 100 A, R S = 200

Noise Figure vs Source Resistance

12 NF - NOISE FIGURE (dB) 10 8 6 4
I C = 100 A I C = 1.0 mA

V CE = 5.0V f = 1.0 kHz

I C = 1.0 mA, R S = 200 I C = 100 A, R S = 2.0 k

2 0 0.1

1 10 f - FREQUENCY (kHz)

100

1 10 R S - SOURCE RESISTANCE ( k )

100

Switching Times vs Collector Current

500
ts

Turn On and Turn Off Times vs Collector Current

500
t off Ic 10 t on

100 TIME (nS)

100 TIME (nS)

t on I B1 =

tf

10 I B1 = I B2 =
Ic 10

tr

10

VBE(OFF) = 0.5V
Ic t off I = I = B1 B2 10

td

10 I C - COLLECTOR CURRENT (mA)

100

1 I

10 - COLLECTOR CURRENT (mA)

100

Power Dissipation vs Ambient Temperature

1 PD - POWER DISSIPATION (W)

SOT-223
0.75

TO-92

0.5

SOT-23
0.25

25

50 75 100 TEMPERATURE (o C)

125

150

2N3906 / MMBT3906 / PZT3906

PNP General Purpose Amplifier

(continued)

Typical Characteristics

(continued)

_ 4

Voltage Feedback Ratio

100 h ie - INPUT IMPEDANCE (k ) 10

Input Impedance
VCE = 10 V f = 1.0 kHz

h re - VOLTAGE FEEDBACK RATIO (x10

10

1 0.1

1 I C - COLLECTOR CURRENT (mA)

10

0.1 0.1

1 I C - COLLECTOR CURRENT (mA)

10

Output Admittance
h oe - OUTPUT ADMITTANCE ( mhos) 1000 V CE = 10 V f = 1.0 kHz
h fe - CURRENT GAIN 1000 500

Current Gain
V CE = 10 V f = 1.0 kHz

200 100 50

100

20

10 0.1

1 I C - COLLECTOR CURRENT (mA)

10

10 0.1

1 I C - COLLECTOR CURRENT (mA)

10

TO-92 Tape and Reel Data

TO-92 Packaging Configuration: Figure 1.0

TAPE and REEL OPTION
FSCINT Label sample
FAIRCHILD SEMICONDUCTOR CORPORATION LOT:

CBVK741B019

HTB:B QTY: 10000

See Fig 2.0 for various Reeling Styles

NSID:

PN2222N

SPEC:

D/C1:

D9842

SPEC REV: QA REV:

B2

FSCINT Label
(FSCINT)

5 Reels per Intermediate Box F63TNR Label Customized Label 375mm x 267mm x 375mm Intermediate Box

F63TNR Label sample

LOT: CBVK741B019 FSID: PN222N D/C1: D9842 D/C2: QTY1: QTY2: QTY: 2000 SPEC: SPEC REV: CPN: N/F: F

Customized Label

(F63TNR)3

TO-92 TNR/AMMO PACKING INFROMATION

Packing Reel Style A E Ammo M P Quantity 2,000 2,000 2,000 2,000 EOL code D26Z D27Z D74Z D75Z

AMMO PACK OPTION

See Fig 3.0 for 2 Ammo Pack Options

Unit weight = 0.22 gm Reel weight with components = 1.04 kg Ammo weight with components = 1.02 kg Max quantity per intermediate box = 10,000 units

FSCINT Label 327mm x 158mm x 135mm Immediate Box Customized Label 5 Ammo boxes per Intermediate Box F63TNR Label 333mm x 231mm x 183mm Intermediate Box

Customized Label

(TO-92) BULK PACKING INFORMATION

EOL CODE J18Z J05Z NO EOL CODE DESCRIPTION TO-18 OPTION STD TO-5 OPTION STD TO-92 STANDARD STRAIGHT FOR: PKG 92, 94 (NON PROELECTRON SERIES), 96 TO-92 STANDARD STRAIGHT FOR: PKG 94 (PROELECTRON SERIES BCXXX, BFXXX, BSRXXX), 97, 98 LEADCLIP DIMENSION NO LEAD CLIP NO LEAD CLIP NO LEADCLIP QUANTITY 2.0 K / BOX 1.5 K / BOX 2.0 K / BOX

BULK OPTION
See Bulk Packing Information table Anti-static Bubble Sheets

FSCINT Label

L34Z

NO LEADCLIP

2.0 K / BOX

2000 units per EO70 box for std option

114mm x 102mm x 51mm Immediate Box

5 EO70 boxes per intermediate Box 530mm x 130mm x 83mm Intermediate box Customized Label

FSCINT Label 10,000 units maximum per intermediate box for std option

2001 Fairchild Semiconductor Corporation

March 2001, Rev. B1

TO-92 Tape and Reel Data, continued

TO-92 Reeling Style Configuration: Figure 2.0

Machine Option A (H) Machine Option E (J)

Style A, D26Z, D70Z (s/h)

Style E, D27Z, D71Z (s/h)

TO-92 Radial Ammo Packaging Configuration: Figure 3.0

FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM

ORDER STYLE D74Z (M)

ORDER STYLE D75Z (P)

FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM

FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP

September 1999, Rev. B

TO-92 Tape and Reel Data, continued

TO-92 Tape and Reel Taping Dimension Configuration: Figure 4.0

Hd P Pd

b Ha H1 HO d L L1 W1 S WO W2 W

t1 P1 F1 P2 DO ITEM DESCRIPTION PO Base of Package to Lead Bend Component Height Lead Clinch Height Component Base Height Component Alignment ( side/side ) Component Alignment ( front/back ) Component Pitch Feed Hole Pitch Hole Center to First Lead Hole Center to Component Center Lead Spread Lead Thickness Cut Lead Length Taped Lead Length Taped Lead Thickness Carrier Tape Thickness SYMBOL b Ha HO H1 Pd Hd P PO P1 P2 F1/F2 d L L1 t t1 W WO W1 W2 DO S DIMENSION 0.098 (max) 0.928 (+/- 0.025) 0.630 (+/- 0.020) 0.748 (+/- 0.020) 0.040 (max) 0.031 (max) 0.500 (+/- 0.020) 0.500 (+/- 0.008) 0.150 (+0.009, -0.010) 0.247 (+/- 0.007) 0.104 (+/- 0 .010) 0.018 (+0.002, -0.003) 0.429 (max) 0.209 (+0.051, -0.052) 0.032 (+/- 0.006) 0.021 (+/- 0.006) 0.708 (+0.020, -0.019) 0.236 (+/- 0.012) 0.035 (max) 0.360 (+/- 0.025) 0.157 (+0.008, -0.007) 0.004 (max)

User Direction of Feed

TO-92 Reel Configuration: Figure 5.0

Carrier Tape Width Hold - down Tape Width Hold - down Tape position Feed Hole Position Sprocket Hole Diameter Lead Spring Out

Note : All dimensions are in inches.

ELECT ROSTATIC SEN SITIVE D EVICES

D4

D1 ITEM DESCRIPTION SYSMBOL MINIMUM MAXIMUM

F63TNR Label Customized Label

D2

Reel Diameter Arbor Hole Diameter (Standard) (Small Hole) Core Diameter Hub Recess Inner Diameter Hub Recess Depth Flange to Flange Inner Width W1 Hub to Hub Center Width W3 Note: All dimensions are inches

D1 D2 D2 D3 D4 W1 W2 W3

13.975 1.160 0.650 3.100 2.700 0.370 1.630

14.025 1.200 0.700 3.300 3.100 0.570 1.690 2.090

W2

D3

July 1999, Rev. A

TO-92 Package Dimensions

TO-92 (FS PKG Code 92, 94, 96)

1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]

Part Weight per unit (gram): 0.1977

2000 Fairchild Semiconductor International

January 2000, Rev. B

SOT-23 Tape and Reel Data

SOT-23 Packaging Configuration: Figure 1. 0
Customized La bel
Packaging Description:
SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a m ultilayer film (Heat Activated Adhesive in na ture) primarily composed of polyester film, adhesive layer, sealan t, and an ti-static sprayed agent. These reeled pa rts in stan da rd option are shippe d with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color an d is made of polystyrene plastic (antistatic coated ). Othe r option comes in 10,000 units per 13" or 330cm diameter reel. This and s ome other options are describe d in the P ackaging Information table. These full reels are individua lly labele d an d placed inside a s tanda rd intermediate made of recyclable corrugated brown pap er with a Fairchil d logo printing. One pizza box contains eight reels maximum. And thes e intermed iate boxes are placed inside a labeled shipping box which comes in different sizes depending on t he nu mber of parts shippe d.

Antistatic Cover Tape

Human Readable Label

Embossed Carrier Tape

3P
SOT-23 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code ) TNR 3,000 7" Dia 187x107x183 24,000 0.0082 0.1175 D87Z TNR 10,000 13" 343x343x64 30,000 0.0082 0.4006

3P

3P

3P

SOT-23 Unit Orientation

343mm x 342mm x 64mm Intermediate box for L87Z Option Human Readable Label

Human Readable Label sample

H uman readable Label

SOT-23 Tape Leader and Trailer Configuration: Figure 2. 0

187mm x 107mm x 183mm Intermediate Box for Stand ard Option

Carrier Tape Cover Tape

Components Trailer Tape 300mm minimum or 75 empt y poc kets Leader Tape 500mm minimum or 125 empty pockets

2000 Fairchild Semiconductor International

September 1999, Rev. C

SOT-23 Tape and Reel Data, continued

SOT-23 Embossed Carrier Tape Configuration: Figure 3.0
P0 T E1 P2 D0 D1

F E2 B0 Wc

Tc K0

P1

A0

User Direction of Feed

Dimensions are in millimeter Pkg type SOT-23 (8mm)

A0
3.15 +/-0.10

B0
2.77 +/-0.10

W
8.0 +/-0.3

D0
1.55 +/-0.05

D1
1.125 +/-0.125

E1
1.75 +/-0.10

E2
6.25 min

F
3.50 +/-0.05

P1
4.0 +/-0.1

P0
4.0 +/-0.1

K0
1.30 +/-0.10

T
0.228 +/-0.013

Wc
5.2 +/-0.3

Tc
0.06 +/-0.02

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum Typical component cavity center line

0.5mm maximum

B0 20 deg maximum component rotation

0.5mm maximum

Sketch A (Side or Front Sectional View)

Component Rotation

A0 Sketch B (Top View)

Typical component center line

Sketch C (Top View)

Component lateral movement

SOT-23 Reel Configuration: Figure 4.0

Component Rotation

W1 Measured at Hub

Dim A Max

Dim A max

Dim N

See detail AA

7" Diameter Option

B Min Dim C See detail AA W3

Dim D min

13" Diameter Option

W2 max Measured at Hub DETAIL AA

Dimensions are in inches and millimeters

Tape Size
8mm

Reel Option
7" Dia

Dim A
7.00 177.8 13.00 330

Dim B
0.059 1.5 0.059 1.5

Dim C
512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2

Dim D
0.795 20.2 0.795 20.2

Dim N
2.165 55 4.00 100

Dim W1
0.331 +0.059/-0.000 8.4 +1.5/0 0.331 +0.059/-0.000 8.4 +1.5/0

Dim W2
0.567 14.4 0.567 14.4

Dim W3 (LSL-USL)
0.311 0.429 7.9 10.9 0.311 0.429 7.9 10.9

8mm

13" Dia

September 1999, Rev. C

SOT-23 Package Dimensions

SOT-23 (FS PKG Code 49)

1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]

Part Weight per unit (gram): 0.0082

2000 Fairchild Semiconductor International

September 1998, Rev. A1

SOT-223 Tape and Reel Data

SOT-223 Packaging Configuration: Figure 1.0
Customized Label
Packaging Description:
SOT-223 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2,500 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or 177cm diameter reel. This and some other options are further described in the Packaging Information table. These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains two reels maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped.

F63TNR Label Antistatic Cover Tape

Static Dissipative Embossed Carrier Tape

F852 014
SOT-223 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code) TNR 2,500 13" Dia 343x64x343 5,000 0.1246 0.7250 D84Z TNR 500 7" Dia 184x187x47 1,000 0.1246 0.1532

F852 014

F852 014

F852 014

SOT-223 Unit Orientation

343mm x 342mm x 64mm Intermediate box for Standard

F63TNR Label

F63TNR Label 184mm x 184mm x 47mm Pizza Box for D84Z Option

F63TNR Label sample

LOT: CBVK741B019 FSID: PN2222A QTY: 3000 SPEC:

SOT-223 Tape Leader and Trailer Configuration: Figure 2.0

D/C1: D9842 D/C2:

QTY1: QTY2:

SPEC REV: CPN: N/F: F

(F63TNR)3

Carrier Tape Cover Tape

Components Trailer Tape 300mm minimum or 38 empty pockets Leader Tape 500mm minimum or 62 empty pockets

2000 Fairchild Semiconductor International

September 1999, Rev. B

SOT-223 Tape and Reel Data, continued

SOT-223 Embossed Carrier Tape Configuration: Figure 3.0
T E1

P0

D0

F K0 Wc B0 E2 W

Tc A0 P1 D1

User Direction of Feed

Dimensions are in millimeter Pkg type SOT-223 (12mm)

A0
6.83 +/-0.10

B0
7.42 +/-0.10

W
12.0 +/-0.3

D0
1.55 +/-0.05

D1
1.50 +/-0.10

E1
1.75 +/-0.10

E2
10.25 min

F
5.50 +/-0.05

P1
8.0 +/-0.1

P0
4.0 +/-0.1

K0
1.88 +/-0.10

T
0.292 +/0.0130

Wc
9.5 +/-0.025

Tc
0.06 +/-0.02

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum Typical component cavity center line

0.5mm maximum

B0 20 deg maximum component rotation

0.5mm maximum

Sketch A (Side or Front Sectional View)

Component Rotation

A0 Sketch B (Top View)

Typical component center line

Sketch C (Top View)

Component lateral movement

SOT-223 Reel Configuration: Figure 4.0

Component Rotation

W1 Measured at Hub

Dim A Max

Dim A max

Dim N

See detail AA

7" Diameter Option

B Min Dim C See detail AA W3

Dim D min

13" Diameter Option

W2 max Measured at Hub DETAIL AA

Dimensions are in inches and millimeters

Tape Size
12mm

Reel Option
7" Dia

Dim A
7.00 177.8 13.00 330

Dim B
0.059 1.5 0.059 1.5

Dim C
512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2

Dim D
0.795 20.2 0.795 20.2

Dim N
5.906 150 7.00 178

Dim W1
0.488 +0.078/-0.000 12.4 +2/0 0.488 +0.078/-0.000 12.4 +2/0

Dim W2
0.724 18.4 0.724 18.4

Dim W3 (LSL-USL)
0.469 0.606 11.9 15.4 0.469 0.606 11.9 15.4

12mm

13" Dia

July 1999, Rev. B

SOT-223 Package Dimensions

SOT-223 (FS PKG Code 47)

1:1
Scale 1:1 on letter size paper

Part Weight per unit (gram): 0.1246

2000 Fairchild Semiconductor International

September 1999, Rev. C

TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.

ACEx Bottomless CoolFET CROSSVOLT DOME E2CMOSTM EnSignaTM FACT FACT Quiet Series FAST
DISCLAIMER

FASTr GlobalOptoisolator GTO HiSeC ISOPLANAR MICROWIRE OPTOLOGIC OPTOPLANAR PACMAN POP

PowerTrench QFET QS QT Optoelectronics Quiet Series SILENT SWITCHER SMART START SuperSOT-3 SuperSOT-6 SuperSOT-8

SyncFET TinyLogic UHC VCX

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.

Preliminary

First Production

No Identification Needed

Full Production

Obsolete

Not In Production

This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.

Rev. G

This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.