KENNEDY VALVE MODEL KS-RW

Kennedy Valve/KS-RW 515 5-1

KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves
Meet or Exceed the Requirements of
AWWA Standard C515
UL-262/FM-1120/1130
ULC-Underwriters of Canada
Water Working Seat Hydrostatic Shell
Size Range
Pressure psi Test psi Test psi
AWWA
2"-12"
250 Water Works 250 & 400 500
ULFM
2 1/2"-12"
200 Fire Protection 250 & 400 500
Available in either non-rising stem or outside screw & yoke.
Figure No.
Figure No. with
Available End Connections & Size Range (STD) Post Plate
Flg. End (NRS) 2" - 12" 7561SS 7701SS (3" - 12")
M.J. 2" - 12" (except 2 1/2") 7571SS 7071SS (3" - 12")
Flg. & M.J. 3" - 12" 7572SS 7702SS (3" - 12")
Push-on for PVC (SDR) 2" - 8" 7597SS 7597PSS (3" - 8")
Flg. End (OS & Y) 2" - 12" 7068A N/A
M.J. for Tapping 4" - 12" 7950SS 7950PSS
Push-on for D.. & C900 PVC 4" - 12" 7901SS 7901PSS
M.J. Cutting-in 4" - 12" 7576SS (Consult K.V.)
Push-on D.. X Flg. 4" - 12" 7902SS 7902PSS
Threaded (NRS) 2" - 3" 7057SS 7057PSS (3" only)
7KUHDGHG26<
FLG & GRV OS&Y 2 1/2" - 10" 7092ABF ------------
GRV & GRV OS&Y 2 1/2" - 10" 7093ABF -------------
FLG & GRV NRS 2 1/2" - 10" 7592ABF 7592PABF
GRV & GRV NRS 2 1/2" - 10" 7593ABF 7593PABF
Accessories
ndicator Posts Handwheels
"T Handles Extension Stems
Stem Guides Floor Boxes
2" Sq. Operating Nuts Chain Wheels
Floorstands (non-rising stem
NOTE: 2" OS&Y Flanged and Threaded versions are UL Listed
NOTE: All RSGV's 18" and larger will be furnished with either spur gearing (vertical) or
or bevel gearing (horizontal)
NOTE: 2" to 3" sizes full wall ductile iron (per AWWA C509 dimensions)
KENNEDY VALVE KS-RW
RESILIENT
WEDGE VALVES
KENNEDY VALVE
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
5- 2 Kennedy VaIve/KS-RW 515
2" - 12" R/S VALVE
NRS MATERIAL LIST
Complies with applicable requirements of AWWA C515
PPE PLUG STANDARD ON FLANGE & GROOVE VALVES @ POSTON "A"
ITEM DESCRIPTION MATERIAL ASTM SPEC.
1 Hex Head Bolt Stainless Steel ASTM F593C
2 Flat Washer Stainless Steel ASTM F593C
3 Operating Nut or Handwheel Gray ron ASTM A126 Class B
4 Hex Head Bolts & Nuts Stainless Steel ASTM F593/F594
5 Stufng Box 2-3" Gray ron ASTM A126 Class B
4-12" Ductile ron ASTM A536 Grade 70505
6 Stem O-Ring Buna-N ASTM D2000
7 Stufng Box O-Ring/gasket Buna-N ASTM D2000
8 Thrust Washer Bearing Delrin ------
9 Hex Head Bolts & Nuts Stainless Steel ASTM F593C/F594
10 Stem Bronze ASTM B584, C86700
11 ndicator Post Plate (Optional 3-12) Ductile ron ASTM A536 Grade 70505
12 Cover Ductile ron ASTM A536 Grade 70505
13 Cover O-Ring Buna-N ------
14 Stem Nut Bronze (NDZ) ASTM B763, C99500
15 Wedge (EPDM Encapsulated) Ductile Iron ASTM A536 Grade 70505
16 Body - all types Ductile ron ASTM A536 Grade 70505
17 Pipe Plug 1/2: 2 1/2-4 --3/4: 6-12 Galvanized Steel ------
11
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
5- 3 Kennedy Valve/KS-RW 515
2" - 12" R/S GATE VALVE
NRS ASSEMBLY EXPLOSION
ITEM NO. QTY. DESCRIPTION MATERIAL ASTM SPEC.
R-1 1 HOLD DOWN BOLT STANLESS STEEL ASTM F593C
R-2 1 HOLD DOWN BOLT WASHER STANLESS STEEL ASTM F593C
R-3 1 SQ/ OPERATNG NUT OR
HANDWHEEL (NOT SHOWN) CAST RON
R-4 2 STUFFNG BOX BOLT & NUT ZNC PLATED
R-5 1 STUFFNG BOX 2-3" GRAY RON ASTM A126 Cass B
4-12" DUCTLE RON ASTM A536 70505
R-6 3 STEM O-RNG Buna-N
R-7 1 STUFFNG BOX O-RNG Buna-N
R-8 1 THRUST WASHER (SZES 2-2.5)
2 THRUST WASHER (SZES 3-12) DELRN
R-9 1 STEM BRONZE
R-10 4 COVER BOLTS & NUTS (SZES 2THRU 6) STANLESS STEEL
8 COVER BOLTS & NUTS (SZES 8 THRU 12) STABLESS STEEL
R-11 1 COVER DUCTLE RON
R-12 1 STEM NUT BRONZE
R-13 1 WEDGE D.I. EPDM COATED
R-14 1 COVER O-RNG Buna-N
R-15 1 BODY DUCTLE RON
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
Kennedy Valve/KS-RW 515 5-4
2" - 12" R/S VALVE
OS&Y MATERIAL LIST
Complies with applicable requirements of AWWA C515
PPE PLUG STANDARD ON FLANGE & GROOVE VALVES @ POSTON "A
ITEM DESCRIPTION MATERIAL ASTM SPEC.
1 Handwheel Hold Down Nut Bronze ASTM B62
2 Top Stem Nut Bronze ASTM B584 C86700
3 Handwheel Gray ron ASTM A126 Class B
4 Hex Head Bolts & Nuts Zinc Plated Steel ASTM A307 Grade B
5 Packing Gland Ductile ron ASTM A536 70-50-5
6 Stem O-Ring Buna N ASTM D2000
7 Packing Lubricated Fiber
8 Thrust Washer Bearing Nylatron ------
9 Thrust Washer (1 only on 2-4) Bronze ASTM B36 C260
10 Stem Brass ASTM B16 C36000
11 Packing Bolts Zinc Plated Steel ASTM A307 Grade B
12 Packing Bolt Nuts Brass Commercial
13 Cover O-Ring Buna N ASTM D2000
14 Stem Head Bronze ASTM B806 C95400/C95500
15 Wedge C.I. EPDM Coated ASTM A126 Class B
16 Body - all types Ductile ron ASTM A536 70505
17 Pipe Plug 1/2: 2 1/2-4 --3/4: 6-12 Galvanized Steel ------
18 Cover Ductile ron ASTM A536 70-50-5
Updated 01/25/13
KENNEDY VALVE MODEL KS-5W
5- 5 Kennedy VaIve/KS-RW C515
2" - 12" R/S GATE VALVE
OS&Y ASSEMbLY ExPLOSION
6
9
3
18
1
9
8
2
10
14
15
16
17
13
7
11
ITEM QTY. DESCRIPTION MATERIAL
1 1 Hand wheel Hold Down Nut Bronze
2 1 Top Stem Nut Bronze
3 1 Hand wheel Gray Iron
4 4
Cover Bolts & Nuts
(Sizes 2 thru 6)
Zinc Plated Steel
4 8
Cover Bolts & Nuts
(Sizes 8 thru 12)
Zinc Plated Steel
5 1 Packing Gland Ductile Iron
6 1 Stem O-Ring Buna N
7 1 Packing Lubricated Fiber
8 1 Thrust Washer Bearing Nylatron
9 2 Thrust Washer (1 only on 24) Bronze
10 1 Stem Brass
11 2 Packing Bolts Zinc Plated Steel
12 2 Packing Bolt Nuts Brass
13 1 Cover O-Ring Buna N
14 1 Stem Head Bronze
15 1 Wedge D.I. EPDM Coated
16 1 Body all types Ductile Iron
17 1 Pipe Plug 1/2: 2 1/24 --3/4: 612 Galvanized Steel
18 1 Cover Ductile Iron
4
12
5
4
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
Kennedy Valve/KS-RW 515 5-6
2" - 12" R/S VALVE NRS FLANGED ENDS
GENERAL DIMENSIONS
Complies with applicable requirements of AWWA C515
7561ASS W/HANDWHEEL
7561ANSS W/NUT
7701ASS W/POST PLATE (3-12")
Standard
Tap Sizes
1/2" NPT - 2 1/2" - 4"
3/4" NPT - 6" - 12"

)DFHWRIDFHGLPHQVLRQVLQFKFRQIRUPWR$60(%
*
inch mm inch mm inch mm inch mm inch mm inch mm # inch mm inch mm inch mm
2 50 7 178 3 1/2 89 6 150 5/8 16 10 7/8 276 4 5/8 16 7 1/4 184 2 50
2 1/2 60 7 1/2 191 3 3/4 95 7 180 11/16 17 11 3/8 289 4 5/8 16 7 1/4 184 2 1/2 60
3 80 8 203 4 102 7 1/2 190 3/4 19 12 3/8 314 4 5/8 16 10 254 3 80
4 100 9 229 4 1/2 114 9 230 15/16 24 14 3/4 375 8 5/8 16 10 254 4 1/4 110
6 150 10 1/2 267 5 1/4 133 11 280 1 25 19 483 8 3/4 19 12 305 6 1/4 160
8 200 11 1/2 292 5 3/4 146 13 1/2 340 1 1/8 29 22 1/2 572 8 3/4 19 14 356 8 1/4 210
10 250 13 330 6 1/2 165 16 410 1 3/16 30 26 1/2 673 12 7/8 22 18 457 10 1/4 260
12 300 14 356 7 178 19 480 1 1/4 32 30 762 12 7/8 22 18 457 12 1/4 310
G H F
ALL FLANGE VALVES ARE TAPPED & PLUGGED @ POSITION "A"
C D E VALVE SIZE A B
Updated 01/25/13
KENNEDY VALVE MODEL KS-5W
5- 7 Kennedy VaIve/KS-RW C515
2" - 12" R/S VALVE FLANGE ENDS
OS&Y GENERAL DIMENSIONS
Complies with applicable requirements of AWWA C5
7068A
STD. TAP SIZE
1/2": 2 1/2"-4"
3/4": 6"-12"
ALL FLANGE VALVES TAPPED & PLUGGED @ POSITION "A"
VALVE
SIZE A b C D E F G H WEIGHT
2 7 3 1/2 6 11/16 1 1 4 5/8 7 1/4 N/A
2 1/2 7 1/2 3 3/4 7 11/16 13 7/8 16 3/8 4 5/8 7 1/4 51
3 8 4 7 1/2 3/4 15 5/8 18 7/8 4 5/8 10 64
4 9 4 1/2 9 15/16 18 1/4 22 3/4 8 5/8 10 105
6 10 1/2 5 1/4 11 1 23 3/4 30 1/8 8 3/4 12 152
8 11 1/2 5 3/4 13 1/2 1 1/8 29 1/4 37 3/4 8 3/4 14 253
10 13 6 1/2 16 1 3/16 35 3/8 45 3/4 12 7/8 18 427
12 14 7 19 1 1/4 40 5/8 53 1/8 12 7/8 18 581
)DFHWRIDFHGLPHQVLRQVLQFKFRQIRUPWR$60(%
*
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
Kennedy Valve/KS-RW 515 5-8
2 1/2" - 8" R/S VALVE FLANGE x GROOVE
OS&Y GENERAL DIMENSIONS
Complies with applicable requirements of AWWA C515
7092ABF
STD. TAP SZE
1/2": 2 1/2"-4"
3/4": 6"-8"
GRV X FLG VALVES TAPPED & PLUGGED @ POSTON "A, "B", "F"
BOSS LOCATON
VALVE SIZE A B C D E F G
2 1/2 7 1/2 3 3/4 7 1/4 13 7/8 16 3/8 2 1/2 3 3/4
3 8 4 10 15 5/8 18 7/8 3 4
4 9 4 1/2 10 18 1/4 22 3/4 4 1/4 4 1/2
6 10 1/2 5 1/4 12 23 3/4 30 1/8 6 1/4 5 1/4
8 11 1/2 5 3/4 14 29 1/4 37 3/4 8 1/4 5 3/4
GRV X FLG VALVES TAPPED & PLUGGED @ POSITION A, "B", "F"
VALVE
SIZE
A B C D E F G
2 1/2 7 1/2 3 3/4 7 1/4 13 7/8 16 3/8 2 1/2 3 3/4
3 8 4 10 15 5/8 18 7/8 3 4
4 9 4 1/2 10 18 1/4 22 3/4 4 1/4 4 1/2
6 10 1/2 5 1/4 12 23 3/4 30 1/8 6 1/4 5 1/4
8 11 1/2 5 3/4 14 29 1/4 37 8 1/4 5 3/4
10 13 6 1/2 16 35 3/8 45 3/4 10 1/4 6 1/2

Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
5-9 Kennedy Valve/KS-RW 515
2 1/2" - 8" R/S VALVE GROOVE ENDS
OS&Y GENERAL DIMENSIONS
Complies with applicable requirements of AWWA C515
7093A
STD. TAP SZE
1/2": 2 1/2"-4"
3/4": 6"-8"
VALVE SIZE A B C D E F
2 1/2 7 1/2 3 3/4 1.97 7 1/4 13 7/8 16 3/8
3 8 4 2.63 10 15 5/8 18 7/8
4 9 4 1/2 3.75 10 18 1/4 22 3/4
6 10 1/2 5 1/4 5.80 12 23 3/4 30 1/8
8 11 1/2 5 3/4 7.67 14 29 1/4 37 3/4
GROOVED VALVES TAPPED & PLUGGED @ POSTON "A
GRV X GRV VALVES TAPPED & PLUGGED @ POSITION A, "B", "F"


VALVE
SIZE
A B C D E F
2 1/2 7 1/2 3 3/4 1.97 7 1/4 13 7/8 16 3/8
3 8 4 2.63 10 15 5/8 18 7/8
4 9 4 1/2 3.75 10 18 1/4 22 3/4
6 10 1/2 5 1/4 5.80 12 23 3/4 30 1/8
8 11 1/2 5 3/4 7.67 14 29 1/4 37
10 13 6 1/2 9.80 16 35 3/8 45 3/4

Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
Kennedy Valve/KS-RW 515 5-10
2"-12" R/S VALVE MECHANICAL
JOINT ENDS
GENERAL DIMENSIONS
Complies with applicable requirements of AWWA C515 7571SS STANDARD
7071SS W/POST PLATE (3-12")
ELLPTCAL
BOLT
HOLES
ELLPTCAL
BOLT
HOLES
VALVE SIZE A B C D E F G H
2 8 1/4 4 1/8 2 1/2 4 1/2 10 7/8 2 5/8 7 1/4 2
2 1/2
3 8 1/2 4 1/4 2 1/2 7 3/4 12 3/8 4 5/8 10 3
4 9 1/2 4 3/4 2 1/2 9 1/8 14 3/4 4 3/4 10 4 1/4
6 10 1/2 5 1/4 2 1/2 11 1/8 19 6 3/4 12 6 1/4
8 13 1/8 6 9/16 2 1/2 13 3/4 22 1/2 6 3/4 14 8 1/4
10 15 1/2 7 3/4 2 1/2 15 3/4 26 1/2 8 3/4 18 10 1/4
12 16 8 2 5/8 18 30 8 3/4 18 12 1/4
ELLPTCAL BOLT HOLE DESGN ELMNATES THE NEED FOR ANT-ROTATONAL BOLTS
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
5-11 Kennedy Valve/KS-RW 515
3"-12" R/S VALVE NRS FLANGED X
MECHANICAL JOINT ENDS
GENERAL DIMENSIONS
Complies with applicable requirements of AWWA C515 7572SS STANDARD
7702SS W/POST PLATE
ELLPTCAL
BOLT
HOLES
VALVE SIZE A B C D E F
3 8 1/4 4 4 1/4 10 12 3/8 3
4 9 1/4 4 1/2 4 3/4 10 14 3/4 4 1/4
6 10 1/2 5 1/4 5 1/4 12 19 6 1/4
8 12 5/16 5 3/4 6 9/16 14 22 1/2 8 1/4
10 14 1/4 6 1/2 7 3/4 18 26 1/2 10 1/4
12 15 7 8 18 30 12 1/4
ELLPTCAL BOLT HOLE DESGN ELMNATES THE NEED FOR ANT-ROTATONAL BOLTS
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
Kennedy Valve/KS-RW 515 5-12
4"-12" R/S VALVE TYTON ENDS
NRS GENERAL DIMENSIONS
Complies with AWWA C515 7901SS STANDARD
7901PSS W/POST PLATE
TYTON (PUSH-ON) FOR DUCTILE IRON PIPE
VALVE SIZE A B C D E F G
4 13 1/4 6 5/8 4.34 14 3/4 10 8 3 5/8
6 14 3/4 7 3/8 4.75 19 12 10.68 3 5/8
8 17 1/8 8 9/16 5.70 22 1/2 14 12.56 4 5/8
10 19 3/8 9 11/16 6.19 26 1/2 18 15.44 4 7/8
12 20 7/8 10 7/16 6.19 30 18 17.94 4 7/8
per ANSI/AWWA C111/A21.11
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
5-13 Kennedy Valve/KS-RW 515
4"-12" R/S VALVE NRS FLANGEx
TYTON ENDS GENERAL DIMENSIONS
Valves comply with AWWA C515 7902SS STANDARD
7902PSS W/POST PLATE
VALVE SIZE A B C D E F
3 8 1/4 4 4 1/4 10 12 3/8 3
4 11 1/8 4 1/2 6 5/8 10 14 3/4 4 1/4
6 12 5/8 5 1/4 7 3/8 12 19 8 1/4
8 14 5/16 5 3/4 8 9/16 14 22 1/2 8 1/4
10 16 3/16 6 1/2 9 11/16 18 26 1/2 10 1/4
12 17 7/16 7 10 7/16 18 30 12 1/4
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
Kennedy Valve/KS-RW 515 5-14
2"-12" R/S VALVE PVC ENDS
NRS GENERAL DIMENSIONS
Complies with applicable requirements of AWWA C515 7597SS STANDARD
7597PSS W/POST PLATE (3-8")
VALVE SIZE A B C D E
2 10 5 3 1/2 10 7/8 7 1/4
2 1/2 10 3/4 5 3/8 3 3/4 11 3/8 7 1/4
3 11 5/8 5 13/16 4 1/6 12 3/8 10
4 13 1/2 6 3/4 4 1/2 14 3/4 10
6 15 3/4 7 7/8 5 3/8 19 12
8 16 1/4 8 1/8 5 3/8 22 1/2 14
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
5-15 Kennedy Valve/KS-RW 515
2"-12" R/S VALVE MECHANICAL CUT
JOINT ENDS GENERAL DIMENSIONS
Complies with applicable requirements of AWWA C515 7576SS STANDARD
7576PSS W/POST PLATE
ELLPTCAL BOLT HOLE DESGN ELMNATES THE NEED FOR ANT-ROTATONAL BOLTS
ELLPTCAL
BOLT
HOLES
VALVE SIZE A B C D E F G H J
4 9 1/2 4 3/4 2 1/2 9 1/8 14 3/4 4 3/4 10 5.10 6.20
6 10 1/2 5 1/4 2 1/2 11 1/8 19 6 3/4 12 7.20 8.30
8 13 1/8 6 9/16 2 1/2 13 3/4 22 1/2 6 3/4 14 9.40 10.50
10 15 1/2 7 3/4 2 1/2 15 3/4 26 1/2 8 3/4 18 11.50 12.62
12 16 8 2 5/8 18 30 8 3/4 18 13.60 14.74
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
Kennedy Valve/KS-RW 515 5-16
2"-3" R/S VALVE THREADED ENDS
NRS GENERAL DIMENSIONS
Complies with applicable requirements of AWWA C515 7057SS 2" NUT
7057WSS HANDWHEEL
VALVE SIZE A B C D E
2 5 1/4 4 1/8 3 9/16 10 7/8 7 1/4
2 1/2 7 5 3/16 4 1/2 11 3/8 7 1/4
3 7 1/8 5 5/8 4 7/8 12 3/8 10
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
5-17 Kennedy Valve/KS-RW 515
3" 12" R/S VALVE NRS TAP x
MECHANICAL JOINT ENDS
GENERAL DIMENSIONS
Valves comply with AWWA C515
7950SS STANDARD
7950PSS W/POST PLATE
ELLPTCAL
BOLT
HOLES
VALVE SIZE A B C D E F G

4 9 1/4 4 1/2 4 3/4 10 14 3/4 3/16 4 1/4
6 10 1/2 5 1/4 5 1/4 12 19 1/4 6 1/4
8 13 1/4 5 3/4 7 1/2 14 22 1/2 1/4 8 1/4
10 14 1/4 6 1/2 7 3/4 18 26 1/2 1/4 10 1/4
12 15 7 8 18 30 1/4 12 1/4
ELLPTCAL BOLT HOLE DESGN ELMNATES THE NEED FOR ANT-ROTATONAL BOLTS
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
Kennedy VaIve/KS-RW 515 5-18
2 1/2"-10" R/S VALVE GROOVE x FLANGE
NRS GENERAL DIMENSIONS
Complies with applicable requirements of AWWA C515 7592ABF
7592PABF
GRV X FLG VALVES TAPPED & PLUGGED @ POSTON "A, "B", "F"
STD. TAP SZE
1/2": 2 1/2"-4"
3/4": 6"-8"
VALVE SIZE A B C D E F
2 1/2 7 1/2 3 3/4 7 1/4 10 7/8 3 3/4 2 1/2
3 8 4 10 12 3/8 4 3
4 9 4 1/4 10 14 3/4 4 1/2 4 1/4
6 10 1/2 5 1/4 12 19 5 1/4 6 1/4
8 11 1/2 5 3/4 14 22 1/2 5 3/4 8 1/4
BOSS LOCATON
GRV X FLG VALVES TAPPED & PLUGGED @ POSITION A, "B", "F"


VALVE
SIZE
A B C D E F
2 1/2 7 1/2 3 3/4 7 11 3/8 3 3/4 2 1/2
3 8 4 10 12 3/8 4 3
4 9 4 1/2 10 14 3/4 4 1/2 4 1/4
6 10 1/2 5 1/4 12 19 5 1/4 6 1/4
8 11 1/2 5 3/4 14 22 1/2 5 3/4 8 1/4
10 13 6 1/2 18 26 1/2 6 1/2 10 1/4

Updated 01/25/13
Updated 01/25/13
KENNEDY VALVE MODEL KS-RW
Kennedy Valve/KS-RW 515 5-20
2"-3" R/S VALVE THREADED ENDS
OS&Y GENERAL DIMENSIONS
Complies with applicable requirements of AWWA C515 7067
VALVE
SIZE A B D E F WEIGHT*
2 5 1/4 4 1/8 7 1/4 11/A
2 1/2 7 5 3/16 7 1/4 13 7/8 16 3/8 40
3 7 1/2 5 3/16 10 15 5/8 18 7/8 50
Updated 01/25/13
Kennedy Valve
A DVSON OF McWANE, NC.
www.kennedyvaIve.com
1021 E. Water Street Elmira, New York 14901
P.O. Box 981
PHONE: (607) 734-2211 FAX: 1-800-952-4771
Updated 01/25/13