Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Nissaninfiniti Re5r05a

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 9

NISSAN/INFINITI RE5R05A

VALVE BODY IDENTIFICATION


The RE5R05A is the Nissan/Infiniti five speed rear drive transmission used in the InfinitiCX35, FX35, FX45, G35, M35, M35x, M45, Q45, and QX56. It is also used in Nissan 350Z, Frontier, Pathfinder, Armada, Titan and Xterra XE models. This transmission has been on the road in North America since the 2002 model year. As a result this transmission is a common sight in many shops, however the information that is available from the O.E.M. is mostly incomplete, especially when it comes to valve body information such as small parts and checkball locations as well as valve nomenclature. There is also confusion in checkball location and valve lineup because there is a difference between the 1st and 2nd Design valve bodies. 1st design includes models from 2002 - early 2004 and 2nd design includes from Mid 2004 to the present. Note: there is a 3rd design valve body that has a difference in the Neutral Reverse Accumulator that is unclear when it was introduced at the time of this printing. The following information will illustrate both the late and early valve body information so badly needed in our industry. Refer to Figure 1 for 1st Design Upper Valve Body and Solenoid Identification. Refer to Figure 2 for 1st Design Upper Valve Body Valve Identification. Refer to Figure 3 for 1st Design Upper Valve Body Small Parts Locations. Refer to Figure 4 for 1st Design Lower Valve Body Checkball Locations. Refer to Figure 5 for 1st Design Manual Valve Body Identification. Refer to Figure 6 for 2nd Design Upper Valve Body and Solenoid Identification. Refer to Figure 7 for 2nd Design Upper Valve Body Valve Identification. Refer to Figure 8 for 2nd Design Upper Valve Body Small Parts Locations. Refer to Figure 9 for 2nd Design Lower Valve Body Checkball Locations. Refer to Figure 10 for 2nd Design Manual Valve Body Identification. Refer to Figure 11 for Normally Applied Solenoid Operation. Refer to Figure 12 for Normally Vented Solenoid Operation. Refer to Figure 13 for Normally Closed Solenoid Operation.

Technical Service Information


AUTOMATIC TRANSMISSION SERVICE GROUP
09-07
Page 1 of 12

BACK
Figure 1

AUTOMATIC TRANSMISSION SERVICE GROUP

Technical Service Information 09-07


Page 2 of 12
M KI #2

23 28 38 26 27 25 29 37 30 31 33 32 34 35 36 24

1st design RE5RO5A, VALVE BODY EXPLODED VIEW


23 LOWER VALVE BODY CASTING. 24 SPACER PLATE AND BONDED GASKETS CODE "AE". 25 UPPER VALVE BODY CASTING. 26 MANUAL VALVE BODY CASTING. 27 CHECK VALVE "C" (FORWARD BRAKE). 28 MANUAL VALVE. 29 FORWARD ENGAGEMENT ACCUMMULATOR. 30 LINE PRESSURE SOLENOID. 31 TORQUE CONVERTER CLUTCH SOLENOID. 32 DIRECT CLUTCH SOLENOID. 33 FRONT BRAKE BAND SOLENOID. 34 INPUT CLUTCH SOLENOID. 35 HIGH & LOW REVERSE CLUTCH SOLENOID. 36 LOW COAST BRAKE CLUTCH SOLENOID. 37 SOLENOID RETAINING BOLT (7 REQUIRED). 38 OIL PUMP SCREEN.

Copyright 2009 ATSG

BACK
Figure 2

AUTOMATIC TRANSMISSION SERVICE GROUP

Technical Service Information 09-07


Page 3 of 12
11 12 13 15 16 17 18 19 20 21 22 14 1 2

3 23 4 5 7 8 10 9 6

1st design RE5RO5A, LOWER VALVE BODY EXPLODED VIEW


1 CHECK VALVE "A" (DRAINBACK). 2 VALVE BODY SCREENS (4 REQUIRED). 3 CHECK VALVE "B" (REVERSE BRAKE). 4 BLANK HOLE BORED WITH NO VALVE TRAIN. 5 DIRECT CLUTCH SWITCH VALVE. 6 DIRECT CLUTCH PRESSURE CONTROL VALVE. 7 INPUT CLUTCH PRESSURE CONTROL VALVE. 8 HIGH AND LOW REVERSE CLUTCH PRESSURE CONTROL VALVE. 9 TORQUE CONVERTER CLUTCH CONTROL VALVE. 10 TORQUE CONVERTER LUBRICATION SWITCH VALVE. 11 COOLER BYPASS VALVE. 12 LINE PRESSURE RELIEF VALVE. 13 TORQUE CONVERTER REGULATOR VALVE. 14 LINE PRESSURE REGULATOR VALVE. 15 FRONT BRAKE BAND PRESSURE CONTROL VALVE. 16 ACCUMMULATOR PRESSURE CONTROL VALVE. 17 PILOT VALVE "A". 18 PILOT VALVE "B". 19 LOW COAST BRAKE SWITCH VALVE. 20 LOW COAST BRAKE REDUCING VALVE. 21 NEUTRAL TO REVERSE ACCUMMULATOR. 22 NEUTRAL TO REVERSE ACCUMMULATOR. 23 LOWER VALVE BODY CASTING. Copyright 2009 ATSG

BBACAKCK
Figure 3

AUTOMATIC TRANSMISSION SERVICE GROUP

Technical Service Information 09-07


Page 4 of 12
Check Valve "B" Check Valve "A"

There Are 4 Valve Body Screens That "Must" Go In As Shown, As They Pilot Into Spacer Plate
Check Valve "A" (Drainback) Check Valve "B" (Reverse Brake)
BALL DIAMETER .312" BALL DIAMETER .312" .350" .705" .285" .316" .016" .039" 5 11 SPRING FREE LENGTH SPRING FREE LENGTH SPRING DIAMETER SPRING DIAMETER WIRE DIAMETER WIRE DIAMETER APPROX COILS APPROX COILS

1st design RE5R05A, LOWER VALVE BODY SMALL PARTS

BACK

Figure 5

AUTOMATIC TRANSMISSION SERVICE GROUP

Technical Service Information


Copyright 2009 ATSG

09-07
Page 5 of 12 1st design RE5R05A, UPPER VALVE BODY CHECK BALLS
Forward Brake Clutch Reverse Brake Clutch Low Coast Brake Clutch 5 Steel Check Balls Required 5.5mm (.218") Diameter Copyright 2009 ATSG

1st design RE5R05A, MANUAL VALVE BODY


Check Valve "C" (Forward Brake)
BALL DIAMETER .312" .705" .316" .039" 11 SPRING FREE LENGTH SPRING DIAMETER WIRE DIAMETER APPROX COILS

Check Valve "C" (Forward Brake)

Figure 4

BACK
Figure 6

AUTOMATIC TRANSMISSION SERVICE GROUP

Technical Service Information 09-07


Page 6 of 12
38
M O MC #4
N 186 22 36 00

23 LOWER VALVE BODY CASTING. 24 SPACER PLATE AND BONDED GASKETS CODE "BC". 25 UPPER VALVE BODY CASTING. 26 MANUAL VALVE BODY CASTING. 27 CHECK VALVE "C" (FORWARD BRAKE). 28 MANUAL VALVE. 29 FORWARD ENGAGEMENT ACCUMMULATOR. 30 LINE PRESSURE SOLENOID. 31 TORQUE CONVERTER CLUTCH SOLENOID. 32 DIRECT CLUTCH SOLENOID. 33 FRONT BRAKE BAND SOLENOID.

34 INPUT CLUTCH SOLENOID. 35 HIGH & LOW REVERSE CLUTCH SOLENOID. 36 LOW COAST BRAKE CLUTCH SOLENOID. 37 SOLENOID RETAINING BOLT (7 REQUIRED). 38 OIL PUMP SCREEN. 23 25 26 27 28 29 37 24 30 31 32 33 34 35 36

2nd design RE5R05A, VALVE BODY EXPLODED VIEW


Copyright 2009 ATSG

BACK
Figure 7

AUTOMATIC TRANSMISSION SERVICE GROUP

Technical Service Information


Copyright 2009 ATSG

09-07
Page 7 of 12
1 2 3 23 4 5 6 7 8 10 9 11 12 13 14 15 17 18 19 20 21 22 16 1 CHECK VALVE "A" (DRAINBACK). 2 VALVE BODY SCREENS (5 REQUIRED). 3 CHECK VALVE "B" (REVERSE BRAKE). 4 REVERSE BRAKE CLUTCH PRESSURE CONTROL VALVE. 5 DIRECT CLUTCH SWITCH VALVE. 6 DIRECT CLUTCH PRESSURE CONTROL VALVE. 7 INPUT CLUTCH PRESSURE CONTROL VALVE. 8 HIGH AND LOW REVERSE CLUTCH PRESSURE CONTROL VALVE. 9 TORQUE CONVERTER CLUTCH CONTROL VALVE. 10 TORQUE CONVERTER LUBRICATION SWITCH VALVE. 11 COOLER BYPASS VALVE.

12 LINE PRESSURE RELIEF VALVE. 13 TORQUE CONVERTER REGULATOR VALVE. 14 LINE PRESSURE REGULATOR VALVE. 15 FRONT BRAKE BAND PRESSURE CONTROL VALVE. 16 ACCUMMULATOR PRESSURE CONTROL VALVE. 17 PILOT VALVE "A". 18 PILOT VALVE "B". 19 LOW COAST BRAKE SWITCH VALVE. 20 LOW COAST BRAKE REDUCING VALVE. 21 NEUTRAL TO REVERSE ACCUMMULATOR. 22 NEUTRAL TO REVERSE ACCUMMULATOR. 23 LOWER VALVE BODY CASTING.

2nd design RE5R05A, LOWER VALVE BODY EXPLODED VIEW

BACK
Figure 8

AUTOMATIC TRANSMISSION SERVICE GROUP

Technical Service Information


Copyright 2009 ATSG

09-07
Page 8 of 12
Check Valve "B" Check Valve "A"

There Are 5 Valve Body Screens That "Must" Go In As Shown, As They Pilot Into Spacer Plate
Check Valve "A" Drainback Check Valve "B" Reverse Brake
BALL DIAMETER .312" BALL DIAMETER .312" .350" .705" .285" .316" .016" .039" 5 11 SPRING FREE LENGTH SPRING FREE LENGTH SPRING DIAMETER SPRING DIAMETER WIRE DIAMETER WIRE DIAMETER APPROX COILS APPROX COILS

2nd design RE5R05A, LOWER VALVE BODY SMALL PARTS

BACK
Figure 9 Figure 10

AUTOMATIC TRANSMISSION SERVICE GROUP

Technical Service Information 09-07


Page 9 of 12
All 3 Steel Check Balls are 5.5mm (.218") in Diameter
Check Valve "C" (Forward Brake)
BALL DIAMETER .312" .705" .316" .039" 11 SPRING FREE LENGTH

SPRING DIAMETER WIRE DIAMETER APPROX COILS

Check Valve "C" (Forward Brake)

2nd design RE5R05A, UPPER VALVE BODY CHECK BALLS 2nd design RE5R05A, MANUAL VALVE BODY
Forward Brake Clutch Low Coast Brake Clutch Reverse Brake Clutch Copyright 2009 ATSG Copyright 2009 ATSG

BACK
.029" Built In Orifice Regulated Oil From Pilot Valve

3 Normally Applied Solenoids


OFF
Solenoid Pressure To Clutch Control Valves

ON
Solenoid Pressure Port Blocked
X Blocked X Open

Pressure From Clutch Control Valves Drained


Figure 11 HIGH/LOW, INPUT & DIRECT CLUTCH SOLENOIDS .029" Built In Orifice Regulated Oil From Pilot Valve Solenoid Resistance is approximately 6-7 ohms across the 2 solenoid terminals

AUTOMATIC TRANSMISSION SERVICE GROUP

Technical Service Information


Copyright 2009 ATSG

09-07
Page 10 of 12

BACK

3 Normally Vented Solenoids


OFF
Solenoid Pressure

ON
Solenoid Pressure Port Blocked
X Blocked X open Figure 12 LINE PRESSURE, TCC & FRONT BRAKE CONTROL SOLENOIDS .029" Built In Orifice Regulated Oil From Pilot Valve

Pressure From Clutch Control Valves Drained


.029" Built In Orifice Regulated Oil From Pilot Valve

To Clutch Control Valves


Solenoid Resistance is approximately 6-7 ohms across the 2 solenoid terminals

AUTOMATIC TRANSMISSION SERVICE GROUP

Technical Service Information


Copyright 2009 ATSG

09-07
Page 11 of 12

BACK

1 Normally Closed Solenoid


OFF
Solenoid Pressure Pressure Connected To Low Coast Brake Valve

ON
Pressure Blocked
Figure 13 LOW COAST BRAKE SOLENOID Solenoid Resistance is approximately 11-15 or 20-40 ohms across the 2 solenoid terminals

AUTOMATIC TRANSMISSION SERVICE GROUP

Technical Service Information


Copyright 2009 ATSG

09-07
Page 12 of 12

Solenoid Pressure

BACK

You might also like