Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
124 views

Tutorial #1

This document contains 7 questions regarding analysis of circuits containing diodes. The questions involve determining voltages and currents using different diode models, including ideal diodes, constant voltage drop diodes, and zener diodes. Graphical and analytical methods are used to solve for values. Circuits include half-wave and full-wave rectifiers, voltage limiters, and a zener diode circuit.

Uploaded by

Greenhearthazel Varma Pdg
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
124 views

Tutorial #1

This document contains 7 questions regarding analysis of circuits containing diodes. The questions involve determining voltages and currents using different diode models, including ideal diodes, constant voltage drop diodes, and zener diodes. Graphical and analytical methods are used to solve for values. Circuits include half-wave and full-wave rectifiers, voltage limiters, and a zener diode circuit.

Uploaded by

Greenhearthazel Varma Pdg
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

ANALOGUE ELECTRONICS I (ECB 2113) TUTORIAL 1

QUESTION #1: For the circuits shown in Figure T1_1 and by using the ideal diodes model, find the values of the voltages and currents indicated.
+5V +5V +5V +5V

I 10k V I I 10k 10k V V

10k

-5V (a)

-5V (b)

-5V (c)

-5V (d)

Figure T1_1 QUESTION #2: For the circuits shown in Figure T1_2 and by using the ideal diodes model, find the values of the voltages and currents indicated.
+3V +1V +3V I 2k -3V (a) (b) +1V +3V I

2k V

Figure T1_2

QUESTION #3: Consider the graphical analysis of the diode circuit in Figure T1_3 with VDD = 5 V, R = 1 k , IS = 10-15 A, n = 1, rD = 20 , VD0 = 0.65 V, and VT = 25 mV. Calculate a small number of points on the diode characteristic in the vicinity of where you expect the load line to intersect it. Use graphical method to estimate the diode current and voltage. Analytically, using linearpiecewise model, find the voltage corresponding to your estimate of current. By how much does it differs from the graphical estimated value?.

ID

VDD

Figure T1_3 QUESTION #4: For the circuits shown in Figure T1_4, using the constant-voltage-drop (VD = 0.7 V) diode model, find the values of the labeled current and voltage.
+10V

5k

10k

-10V

Figure T1_4

QUESTION #5: A 9.1 V zener diode exhibits its nominal voltage at a test current of 28 mA. At this current, the incremental resistance is specified as 5 . Find VZ0 of the zener model. Find the zener voltage at a current of 10 mA and at 100 mA. QUESTION #6: Consider the half-wave rectifier circuit shown in Figure T1_5. Let vs be a sinusoid with 15 V peak amplitude, and R = 1.5 k . Use the constant-voltage-drop diode model with VD = 0.7 V.

vs

vo

Figure T1_5 a) Sketch the transfer characteristic. b) Sketch the waveform of vo. c) Find the PIV of the diode. QUESTION #7: Sketch the transfer characteristic vo versus vi for the limiter circuits shown in Figure T1_6. All diodes begin conducting at a forward voltage drop of 0.5 V and have voltage drops of 0.7V when fully conducting.
+2V vi

1k vo

1k vi vo -2V (a) (b)

Figure T1_6

You might also like