Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 62 views

    Technical Data Sheet Permatex Rear Window Defogger Tab Adhesive

    Uploaded by

    rrebollar
    Permatex Rear Window Defogger Tab Adhesive is a two-part adhesive kit used to repair broken rear window defogger tabs. It permanently bonds the tab back to the rear window grid with a high conductivity adhesive. The adhesive is resistant to extreme weather conditions and provides an excellent and long-lasting repair. The kit contains everything needed to clean, prepare, and apply a new tab in just a few easy steps.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Technical Data Sheet Permatex Rear Window Defogger Tab Adhesive

    Uploaded by

    rrebollar
    62 views1 page
    Permatex Rear Window Defogger Tab Adhesive is a two-part adhesive kit used to repair broken rear window defogger tabs. It permanently bonds the tab back to the rear window grid with a high conductivity adhesive. The adhesive is resistant to extreme weather conditions and provides an excellent and long-lasting repair. The kit contains everything needed to clean, prepare, and apply a new tab in just a few easy steps.

    Original Title

    21351.pdf

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Permatex Rear Window Defogger Tab Adhesive is a two-part adhesive kit used to repair broken rear window defogger tabs. It permanently bonds the tab back to the rear window grid with a high conductivity adhesive. The adhesive is resistant to extreme weather conditions and provides an excellent and long-lasting repair. The kit contains everything needed to clean, prepare, and apply a new tab in just a few easy steps.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    62 views1 page

    Technical Data Sheet Permatex Rear Window Defogger Tab Adhesive

    Uploaded by

    rrebollar
    Permatex Rear Window Defogger Tab Adhesive is a two-part adhesive kit used to repair broken rear window defogger tabs. It permanently bonds the tab back to the rear window grid with a high conductivity adhesive. The adhesive is resistant to extreme weather conditions and provides an excellent and long-lasting repair. The kit contains everything needed to clean, prepare, and apply a new tab in just a few easy steps.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Toll Free: 87 PERMATEX (877-376-2839) 10 Columbus Blvd.

    , Hartford, Connecticut 06106 6875 Parkland Boulevard, Solon Ohio 44139

    Technical Data Sheet Permatex Rear Window Defogger Tab Adhesive


    AAM Revised 02/09

    PRODUCT DESCRIPTION Permatex Rear Window Defogger Tab Adhesive is a two part, electrically conductive adhesive system for reapplying the tab to the grid. The kit provides a low-cost, high quality repair for damaged rear window defogger tabs. PRODUCT BENEFITS Permanently bonds defogger tab to rear window grid High electrical conductivity Resistant to extreme weather conditions Excellent performance Complete kit TYPICAL APPLICATIONS Use on all rear window defoggers to repair broken tab DIRECTIONS FOR USE For best results, the ambient temperature should be at least 50F during application. 2. Turn off the rear defogger. Carefully remove the wire from the tab. 3. Ensure that the tab is flat and makes complete contact with the mounting surface. Note: Do Not mount tab on the same grid area if the 4. grid has been removed from the glass. There must be grid so that a complete circuit can be made. 5. If grid has come off with tab, rub tab on a flat piece of 180 grit or finer sand paper until surface is flat and of same color. 6. Open the Cleaner/Activator towelette by pulling both sides of the protective packet at the point at the top sides of the package. Fold the packet back to use. The towelette is attached to the foil packet. Do not remove. 7. Clean the lead attachment area on the rear window and the tab with the Cleaner/Activator towelette. Allow activator to dry for at least 2 minutes. DO NOT TOUCH mounting surface of the glass or tab after cleaning and activating. 8. Thoroughly knead the adhesive pouch until the adhesive is of uniform beige color. Cut top of pouch. Apply one drop of adhesive to the center of the mounting area of the tab. 9. Immediately apply tab to rear window; hold firmly for 1 minute. Allow 24 hours to cure before turning on defogger. 10. If available, check the continuity between the tab and the grid with a multimeter. There should be 0 ohms resistance between the two points. 1.

    For Cleanup 1. May be cleaned with acetone or nail polish remover that contains acetone. 2. Clean hands with Permatex Fast Orange hand cleaner or soap and water. PHYSICAL PROPERTIES
    Chemical Type Appearance Odor Flash Point T.C.C. (F) Adhesion Temperature resistance Cure time Typical Value Modified acrylic ester Adhesive beige(when mixed) Activator - amber Sharp >200 Excellent -30F to +180F Initial - 2 minutes Full cure - 24 hours

    GENERAL INFORMATION This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected for use with chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). ORDERING INFORMATION Part Number 21351

    Container Size 0.03 fl. oz. adhesive 0.02 fl. oz. activator

    STORAGE Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8 and 28C (46 and 82F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container. NOTE The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. Permatex, Inc. specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Permatex, Inc. products and disclaims any liability for consequential or incidental damages of any kind, including lost profits. This product may be covered by one or more United States or foreign patents or patent applications.

    NOT FOR PRODUCT SPECIFICATIONS. THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY. PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION. PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE (1-87PERMATEX)

    Permatex and Fast Orange are trademarks of Illinois Tool Works, Inc. 2009 Permatex, Inc. All rights reserved.

    You might also like