UV-5R Manual Programming
UV-5R Manual Programming
To program repeater 146.985, minus offset, 100 Hz tone, low power level, into Channel#010 Turn on radio. If in Memory Mode switch to VFO Mode (VFO/MR) Select 5 KHz Step - (MENU + 1 + MENU) (Use the key for 5K) (MENU + EXIT) Enter Press [MENU] + 2 + [MENU] Press [MENU] + [EXIT] Press [MENU] + 5 + [MENU] Press [MENU] + [EXIT] Press [MENU] + 1 + 3 + [MENU] Press [MENU] + [EXIT] Press [MENU] + 2 + 7 + [MENU] Press [MENU] + [EXIT] Enter Press [MENU] + 2 + 7 + [MENU] + [MENU] + [EXIT] 146.985 The receive frequency Use the key to select Low Power To accept and exit Use the key to select Wide Bandwidth To accept and exit Use the key to select 100 Hz Tone To accept and exit Enter 010 or Use the key to select 010 This stores the Receive Frequency Radio prompts that REC FREQ has been stored The transmit frequency Radio prompts that TX FREQ has been stored Return to Memory Mode (VFO/MR)
146.385