Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Fisherr 8510 and 8510B Eccentric Disc Control

Valves (EMA)
Fisher 8510 and 8510B eccentric disc valves feature an
eccentrically mounted disc and a PTFE or 316 stainless
steel seal ring. The pressure-assisted seal ring provides
excellent shutoff against pressure applied in either
direction. The 8510B is a multi-class rated valve,
available in NPS 2 through 12, and PN10 through
PN100 compatible (compatibility varies with size and
class, see table 1).
The 8510 is rated for CL150, available in NPS 14
through 24, and PN10 and PN16 compatible
(compatibility varies with size and class, see table 1).
These valves combine with a variety of power and
manual actuators to form reliable, high-performance
control valves suited for many liquid and gas
applications requiring extremely low leakage.
Constructions are available for temperatures up to
538C (1000F).

W4739-2

Eccentric Disc Control Valve with Fisher 1052 Actuator

and 3610J Positioner

Unless otherwise noted, all NACE references are to

NACE MR0175-2002.

Features

Sour Service CapabilityMaterials are available for

applications involving sour service. These materials
comply with the requirements of NACE
MR0175-2002.

Excellent Flow ControlThe eccentrically mounted

disc design provides an approximately linear flow
characteristic and can be used for on/off or
throttling control applications through 90 degrees
of disc rotation. Optional disc stop on 8510B
provides seal protection.
(continued on page 3)

www.Fisher.com

W9264-1

Fisher 8510B with Alternate Double D Shaft and

1035/El-O-Matic Actuator

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Specifications
Valve Sizes and End Connection Style
8510B: NPS J 2, J 4, J 6 and J 8 (PN10 through
PN100) - CL150, 300 or 600 ASME flange
compatibility, J 10 and J 12 (PN10 through PN40) CL150 ASME flange compatibility

Flow Direction
Standard (forward flow) is with the seal retainer
facing upstream; reverse flow is permissible within
specified limitations
Flow Coefficients
See table 1

8510 flangeless valves: NPS J 14 (PN10 and PN16),

J 16 (PN16), J 18, J 20 (PN16) and J 24 (PN16) CL150 ASME flange compatibility for NPS 14 through
24

Flow Coefficient Ratio(2)

Also see table 1.

Noise Levels

Maximum Inlet Pressures(1)

WCC Steel, CF3M Stainless Steel (316L SST), and
CN7M (Alloy 20) Valve Bodies: Consistent with
applicable pressure-temperature ratings in table 2,
unless limited by pressure drop/temperature
capabilities in tables 6, 7, 8, 9 and 10 or temperature
capabilities in table 11
M35-1 Valve Bodies: As shown in table 2, unless
further limited by pressure drop/temperature
capabilities in table 10 or temperature capabilities in
table 11
Maximum Pressure Drops(1)
Steel Valve Bodies (8510 and 8510B): See table 6 or 7
CF8M Stainless Steel Valve Bodies (8510): See tables
8 and 9
Alloy Valve Bodies (8510B): See table 10
Shutoff Classifications per ANSI/FCI 70-2 and IEC
60534-4
PTFE Seal Ring: Bidirectional shutoff to Class VI is
standard
316 Stainless Steel Seal Ring: 0.001% of maximum
valve capacity (one tenth of Class IV)
Construction Materials
See tables 3, 4, and 5
Material Temperature Capabilities(1)
See table 11
Flow Characteristic
Approximately linear

100 to 1
See Catalog 12 for sound pressure level prediction
Disc Rotation
Clockwise to close (when viewed from actuator side
of valve) through 90 degrees of disc rotation
Actuator Valve Action
With diaphragm or piston rotary actuator,
field-reversible between J push-down-to-open
(extending actuator rod opens valve) and J
push-down-to-close (extending actuator rod closes
valve)
With 1035 Rack and Pinion actuator with spring
return or double acting action, field-reversible
between J fail-to-open and J fail-to-close
Valve Classification
J Face-to-face dimensions of NPS 3 through 6 in
CL150 and 300, and face-to-face dimensions of NPS 8
through 24 in CL150, meet API 609 standards for
face-to-face dimensions of narrow flangeless and
single-flange valves
J DIN face-to-face dimensions for all sizes meet DIN
3202 Part 3/K2, and
J JIS B2210 standard face-to-face dimensions are
available on request.

Mating Flange Capabilities

All size compatible with welding-neck and slip-on
flanges (schedule 80 or lighter for 8510B NPS 2
through 12; schedule 40 or lighter for 8510 NPS 14
through 24)
Shaft Diameters and Approximate Weights
See figures 7 and 8
Options
J Line flange bolting, J FGM line flange gaskets

1. The pressure/temperature limits in this bulletin and any applicable standard or code limitation should not be exceeded.
2. Ratio of maximum flow coefficient to minimum useable flow coefficient.

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

ENVIRO-SEAL Packing System Specifications

Available Packing
J ENVIRO-SEAL PTFE Packing System
J ENVIRO-SEAL Graphite Packing System

Maximum Temperature/Pressure Limits(1)

Maximum Application Temperature/Pressure Limits
to meet EPA Fugitive Emission Standard of 100
ppm(2):
For ENVIRO-SEAL PTFE Packing Systems: Up to 232C
(450F) at the ASME class rating of the valve.
For ENVIRO-SEAL Graphite Packing Systems: Up to
316C (600F) at the ASME class rating of the valve
Material Temperature Range:
For ENVIRO-SEAL PTFE Packing Material:
-46 to 232C (-50 to 450F)
For ENVIRO-SEAL Graphite Packing Material:
Up to 316C (600F)

Construction Materials(3)
PTFE Packing Systems:
Packing Rings: PTFE V-ring(4)
Male and Female Adaptor Rings: Carbon-filled PTFE
V-ring
Anti-Extrusion Rings: High strength polymer
Packing Box Rings: S31600 (316 SST)
Graphite Packing Systems:
Packing Rings: Graphite
Anti-Extrusion Rings: Carbon
Packing Box Rings: S31600 (316 SST)
Spring Pack Components:
O-Ring: Nitrile. The O-ring serves as an assembly
convenience to hold the springs in position on the
follower.
Packing Follower: S31600 with carbon-filled PTFE liner
Springs: N07718
Packing Flange: S31600 (316 SST)
Packing Box Studs: Strain-hardened S31600,
SA-193-B8M
Packing Box Nuts: S31600 SA-194-8M

1. The pressure/temperature limits in this bulletin and any applicable standard or code limitation for valve should not be exceeded.
2. The Environmental Protection Agency (EPA) has set a limit of 100 parts per million (ppm) for fugitive emissions from a valve.
3. For other materials of construction, see table 3.
4. In vacuum service it is not necessary to reverse the ENVIRO-SEAL PTFE packing rings.

Features (continued)

Improved Environmental CapabilitiesThe optional

ENVIRO-SEALt packing systems, shown in figure 6,
are designed with very smooth stem surfaces, and
live loading provides improved sealing, guiding, and
loading force transmission. The seal of the
ENVIRO-SEAL system can control emissions to
below the EPA (Environmental Protection Agency)
limit of 100 ppm (parts per million) for valves.

Lost Motion MinimizedFor 8510, the taper pin/disc

connection and the splined valve shaft with
clamped lever and single pivot linkage reduce lost
motion between the actuator and valve. For 8510B,
the taper key/disc connection and the splined valve
shaft with clamped lever and single pivot linkage
reduce lost motion between the actuator and valve.

Greater Capacities and Lower Operating

TorquesThe contoured disc increases flow
capacity and reduces operating torque at peak
angles of disc opening.

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Construction Features

Field-Reversible Valve ActionThe actuator/valve

assembly action can be converted from
push-down-to-open to push-down-to-close, or vice
versa, without additional parts.

PTFE seal ring with pressure-assisting sealing action

(figure 5) are designed to provide shutoff regardless
of flow direction.

Reliable Flange Gasketing SurfaceThe seal retainer

cap screws or retention clips are outside the gasket
surface of the seal retainer, and spiral wound or flat
sheet gaskets can be installed between the
uninterrupted seal retainer face and the pipeline
flange.

Easy InstallationCentering holes (figures 1, 2 and

3) engage the line flange bolts to simplify
installation and provide for centering of the valve in
the pipeline.

Self-Flushing ActionWith standard right-hand

actuator mounting, the bottom edge of the disc
opens downstream away from the seal, and the flow
stream flushes sediment from the seal.

Long Seal LifeThe opening and closing path of the

eccentric disc (figure 4) minimizes disc contact with
the seal ring, thereby reducing seal wear, undue
friction, and seating torque requirements.

Double D Shaft8510B valves in NPS 2 through 12

are available with double D shaft end designed to
accept the 1035 Rack and Pinion Actuator and other
quarter-turn actuators.

Shaft RetentionRedundant shaft protection is

provided with 8510B valves with the double D drive
shaft. The packing follower and stepped shaft
interact to provide the redundant shaft retention.

Integral Shaft-to-Body BondingStandard valve

construction includes conductive packing to
provide electrical bonding for hazardous area
applications.

Exceptional Shutoff at High Pressure DropsBoth

the 316 stainless steel seal ring and the bidirectional

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Figure 1. Typical Fisher 8510B Construction Detail

RETAINER CLIP

CENTERING HOLE

VIEW A

SEE VIEW A

TAPER
KEY

SEAL
RETAINER
SEAL
RING

DISC

SEAL
RING
ASSEMBLY

SPRING

BEARING
SPACER

VALVE
BODY

PTFE SEAL

41B6064-A
41B6101-A
B2303*

316 STAINLESS
STEEL SEAL

Figure 2. Typical Fisher 8510B Construction Detail with Double D Shaft

TAPER KEY
CENTERING HOLE

REDUNDANT SHAFT
RETENTION DEVICE

BEARING
SPACER

39b8285-A
E0781

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Figure 3. Construction of Fisher 8510

CENTERING
HOLE

48A5626-A
B1691-3

Figure 4. Comparison of Disc Action

SEAL RING (PTFE
CONSTRUCTION
SHOWN)
ECCENTRIC
DISK PATH
OF ROTATION
CONVENTIONAL
DISK PATH
OF ROTATION

ECCENTRIC
DISK CENTER
OF ROTATION

SIDE VIEW DISK FULLY CLOSED

ECCENTRIC
DISK

CENTERLINE OF
VALVE BODY
CONVENTIONAL
DISK CENTER
OF ROTATION

A2867-2

CONVENTIONAL
DISK

VALVE BODY

BOTTOM VIEW DISK FULLY OPENED

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Figure 5. Action of Bidirectional PTFE Seal RIng (Top) and Metal Seat Ring (Bottom)
VALVE BODY
SEAL RING
SEAL
RETAINER
SPRING

DIRECTION OF
PRESSURE

STANDARD
FLOW DIRECTION
DISC
VALVE BODY
SEAL RING

SEAL
RETAINER

DIRECTION
OF PRESSURE

STANDARD
FLOW DIRECTION
DISC

DISC CLOSING OR OPENING AND NOT

IN CONTACT WITH SEAL RING

DISC CLOSED AND IN

CONTACT WITH SEAL RING

ACTION OF SEAL RING WITH PRESSURE

APPLIED FROM BOTH DIRECTIONS

B1558-3

Note:
1

Arrow indicates disc position with no pressure.

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Table 1. Flow Coefficients and ASME Rating and Flange Compatibility

VALVE BODY
SIZE, NPS

Cv WITH NORMAL FLOW AND

DISC WIDE OPEN
(90 DEGREES ROTATION)

91.7

232

459

ASME RATING
COMPATIBILITY
STEEL, STAINLESS
STEEL, AND ALLOY
20 VALVE BODIES

VALVE
DESIGNATION
M35-1(1)

ASME FLANGE
COMPATIBILITY

PN FLANGE
COMPATIBILITY

8510B

CL150, 300, and 600

CL150/300/ 600

CL150,

300, and
600

PN10, PN16, PN25, PN40, PN63

and PN100

907

1740

10

3570

CL150
CL300

CL150
CL300

CL150
CL300

PN10 and PN16

PN25 and PN40

12

4880

CL150
CL300

CL150
CL300

CL150
CL300

PN10 and PN16

PN25 and PN40

14

7040

16

9650

18

12,100

20

14,500

PN16(2)

24

21,800

PN16(2)

8510
PN10 and PN16(2)
PN16(2)
CL150

---

---

CL150

1. M35-1 valve bodies are not included in ASME B16.34. See table 2 for pressure/temperature information for M35-1 valve bodies. The designations CL150, 300, and 600 for these valve bodies
are used only to indicate relative pressure-retaining capabilities and are not ASME pressure/temperature rating class designations.
2. Consult your Emerson Process Management sales office for pressure/temperature ratings of these valves.

Table 2. Maximum Allowable Inlet Pressures for M35-1 Valve Bodies(1)

TEMPERATURE

M35-1(1)
150(1)

300(1)

15.8
13.8
13.1
12.7
12.3

41.3
36.5
34.1
33.1
33.0

230
200
190
185
178

600
530
495
480
478

Bar

C
-46 to 38
93
149
204
232

82.7
72.7
68.2
65.8
65.7
Psig

F
-50 to 100
200
300
400
450

600(1)

1200
1055
990
955
953

1. This material is not listed in ASME B16.34. Also see the installation information. The designations CL150, 300, and 600 are used only to indicate relative pressure-retaining capabilities
and are not ASME pressure-temperature rating class designations.

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Table 3. Standard Construction Materials

Part

Material

Valve Body(1)

8510: WCC Steel, CG8M (316 stainless steel), M35-1(2), or CN-7M (alloy 20)
8510B: WCC Steel, CF3M (316L SST), M35-1(2), CN7M (alloy 20), 1.0619
steel, or 1.4581 stainless steel
8510: WCC Steel (A216), S31603 (316L stainless steel) (both with
chrome-plated seating surfaces), M35-1, or alloy 20 CN-7M
8510B: WCC Steel (A216), M35-1, CN7M (alloy 20), S31603 (316L SST), or Cr
PI S31603 (Cr Pl 316L SST)
PTFE with 316 stainless steel, N04400, or alloy 20 spring

Disc(1)
Seal(1)

316 stainless steel seal and backup rings with graphite gaskets bonded to
them

Lined

8510: PTFE(3)/composition lined w/SST jacket, PTFE(3) composition lined

w/S31600 (316 SST) jacket, S44004 (440C SST), alloy 6B, silver-plated alloy
6B, filled PTFE(4) w/N04400 jacket, or filled PTFE(4) w/N08020 (alloy 20)
jacket
8510B: PTFE(3)/composition lining with S31603 (316L SST), PTFE(4) with
S31603 jacket, filled PTFE(4) with N04400 jacket, and filled PTFE(4) with
N08020 (alloy 20) jacket

All-metal

440C stainless steel, alloy 6B, or silver-plated alloy 6B

Bearings(1)

8510: Valve shaft(1) and bearing spacers

S17400 (17-4PH SST), S20910, N04400, or alloy 20

8510B: Valve Shaft(1)(6)

S17400 (17-4PH), S20910, N05500, N08020 (alloy 20),

or S31603 (316L SST)

8510B: Bearing Spacers

PTFE/S31603 (316L SST), S17700 (17-7 PH SST), alloy 6B, PTFE/N04400, and
PTFE/N08020 (alloy 20)

8510: Taper Pins

8510B: Taper Keys

S17400 (17-4PH) and

S20910 shafts

8510: S20910
8510B: S20910 SST, N05500, N10276 (alloy 276),
or N08020 (alloy 20)

Alloy shafts

Same material as shaft

8510: Bearing stops (for

Steel valve bodies
metal bearings and
CF8M steel valve bodies
non-alloy valve bodies only)
8510B: Bearings stops (for metal bearings and non-alloy valves only)

S17400
S31600 (316 stainless steel)
S31600 (316 SST)

Seal retainer

Same material as valve body

Packing arrangements

Standard packing is available with PTFE packing V-rings with one carbon-filled
PTFE conductive ring, PTFE-composition rings with one graphited conductive
ring, and preformed graphite ribbon rings. ENVIRO-SEAL packing system is
available with PTFE V-rings with one carbon-filled PTFE conductive ring or with
graphite packing rings.

Packing followers and packing box rings

S31600, N04400, or alloy 20

Packing flanges, studs and nuts

Plated steel, S31603(5), S31600, CF8M, N04400, or alloy 20

1. See table 4 for acceptable trim material combinations.

2. This is not an ASME B16.34 or ASME code-approved material. Also see the Installation section.
3. Reinforced PTFE in phenolic resin, Emerson Process Management designation is FMS 30B4.
4. PTFE with selected fillers. Emerson Process Management designation is FMS 30B5.
5. S31603 is available for 8510B only
6. 8510B valve shafts with Double D end are available only in 17-4PH SST, 316L SST or S20910.

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Table 4. Trim Combinations with Standard Construction Materials

Disc Material

Shaft Material

Bearing Material

8510: WCC steel

with
chrome-plated
seating surfaces
8510B: WCC steel
with
chrome-plated
seating surface or
S31603 (316L
SST)(1)

Seal Material

Acceptable Valve Body

Material

PTFE

S17400 (17-4PH stainless

steel)

8510: S31603
(316L SST) with
chrome-plated
seating surfaces

S17400

8510B: S31603
(316L SST) with
chrome-plated
seating surfaces or
S31603 (316L SST)
without plating
with PTFE seal only

S20910

Trim
Number
1

PTFE/composition-lined, w/SST
jacket
316 stainless steel

S44004 (440C SST)

316 stainless steel

PTFE/composition-lined w/SST
jacket

316 stainless steel

PTFE
PTFE

PTFE/composition-lined
S31600 (316 SST) jacket

316 stainless steel

S44004

316 stainless steel

Silver-plated alloy 6B

316 stainless steel

Alloy 6B

316 stainless steel

PTFE/composition-lined with
S31600 jacket

316 stainless steel

Silver-plated alloy 6B

316 stainless steel

PTFE

Steel

9
2

Steel

8510: Steel or CF8M

8510B: Steel or CF3M
(316 SST)
Steel
8510: Steel or, CF8M
8510B: Steel or CF3M
(316 SST)
8510: Steel or CF8M
8510B: Steel or CF3M
(316 SST)

4
8
10
12
14
3
7
11

Alloy 6B

316 stainless steel

M35-1

N05500

Filled PTFE(2) w/ N04400 jacket

PTFE

M35-1 or steel

15(3)

13

Alloy 20 CN7M

Alloy 20

Filled PTFE(2) w/ N08020 (alloy

20) jacket

PTFE

Alloy 20 CN-7M

17(3)(4)

1. Steel disc not available in the NPS 2 and 3 valves.

2. PTFE with selected fillers. Emerson Process Management designation is FMS 30B5.
3. This trim not available in the 8510 NPS 14 through 24 valves.
4. This trim not available with the Double D shaft version of the 8510B.

Table 5. Trim NT3 Part Materials for Compliance with NACE MR0175-2002 (Sour Service) Specifications
Valve Body

Disc

Seal

8510: CG8M
(317 stainless
steel) with
chromeplated seating
8510: Steel or
surfaces
PTFE seal
CF8M (316
8510B:
with
stainless steel)
S31603 (316
N05500
8510B: Steel or
SST) with
spring
CF3M (316L SST)
chrome-plated
seating
surfaces or
S31603 (316L
SST)

10

Bearings

8510: Filled PTFE

w/ S31600 (316
SST) jacket
8510B: PTFE/
compositionlined S31603
(316L SST)

Valve Shaft

S20910

Taper Pins

S20910

Packing

Packing
Followers
and Packing
Box Rings

Packing
Flanges

Packing
Flange
Bolting

8510: S31600
PTFE V-ring
8510: steel
(316 stainless
Grade B7
with one
8510B:
steel)
steel studs
carbon-filled
S31600 (316
8510B: S31600
and Grade
PTFE
SST) or
(316 SST) or
2H steel
conductive
S31603
S31603 (316L
nuts
packing ring
(316L SST)
SST)

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Figure 6. Typical ENVIRO-SEAL Packing Arrangements for Rotary Valves

PACKING
BOX STUD

SPRINGS
VALVE
BODY

ACTUATOR
MOUNTING
YOKE

ANTIEXTRUSION
RINGS

VALVE
SHAFT

VALVE
SHAFT

PACKING
FLANGE

PACKING
BOX
RING

YOKE
BEARING
PACKING
FLANGE

PACKING
BOX RING
PTFE
PACKING
V-RINGS
SHOWN

PACKING
FOLLOWER
W5806-1

SINGLE PTFE PACKING

SPRINGS
PACKING
FOLLOWER

GRAPHITE
PACKING
SET

W6125-1

GRAPHITE PACKING

11

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Table 6. Maximum Allowable Shutoff Pressure Drops(1) in Bar for Steel Valve Body Material
TABLE 4
OR 5 TRIM
NUMBER

1(2), 2, 3, 4,
NT3

5(2), 6, 7, 8

9(2), 10

11

12

13

14

15

FLOW
DIRECTION

Forward or
reverse

MAX ALLOWABLE SHUTOFF P

(PER VALVE BODY SIZE, NPS)

TEMP. C
-29 to 49
66
93
121
149
191
204

8510B
3

10

12

14

16

18

20

24

56.2
56.2
48.5
38.6
28.7
13.8
10.3

64.5
58.5
48.5
38.6
28.7
13.8
10.3

53.8
53.8
48.5
38.6
28.7
13.8
10.3

57.9
57.9
48.5
38.6
28.7
13.8
10.3

54.6
54.6
48.5
38.6
28.7
13.8
10.3

37.7
37.7
37.7
37.7
28.7
13.8
10.3

41.4
41.4
41.4
38.6
28.7
13.8
10.3

19.7
19.0
17.9
16.9
15.5
13.8
10.3

19.7
19.0
17.9
16.9
15.5
13.8
10.3

19.7
19.0
17.9
16.9
15.5
13.8
10.3

19.7
19.0
17.9
16.9
15.5
13.8
10.3

19.7
19.0
17.9
16.9
15.5
13.8
10.3

232(3)

3.4

3.4

3.4

3.4

3.4

3.4

3.4

3.4

3.4

3.4

3.4

3.4

Forward

-29 to 232(3)

51.0

51.0

51.0

51.0

31.0

17.2

17.2

10.3

10.3

10.3

10.3

10.3

Reverse

-29 to 232(3)

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

-29 to 149

19.7(4)

31.5(4) 28.8(4) 20.2(4) 24.3(4) 13.4(4)

9.0(4)

5.3

10.0(4)

6.4

3.8

7.9(4)

204

18.2(4)

29.9(4) 27.4(4) 20.2(4) 24.3(4) 12.8(4)

8.5(4)

4.9

9.5(4)

6.1

3.5

7.5(4)

260

17.3(4)

28.9(4)

26.5(4)

19.6(4)

24.3(4)

12.3(4)

8.2(4)

4.7

9.2(4)

5.8

3.3

7.3(4)

316

16.8(4)

28.3(4)

26.0(4)

19.2(4)

24.0(4)

12.1(4)

8.1(4)

4.6

9.0(4)

5.7

3.2

7.2(4)

371

15.9(4)

27.3(4)

25.1(4)

18.6(4)

23.3(4)

11.7(4)

7.7(4)

4.3

8.8(4)

5.4

3.0

7.0(4)

427

15.0(4)

26.3(4) 24.2(4) 17.9(4) 22.6(4) 11.2(4)

7.4(4)

4.1

8.4(4)

5.2

2.8

6.7(4)

-29 to 93

19.7(4)

21.9(4)

18.5(4)

17.0(4)

14.6(4)

9.1(4)

9.0(4)

5.2

7.4(4)

5.7

3.7

6.7

149

17.1(4)

21.9(4)

18.5(4)

17.0(4)

14.6(4)

9.1(4)

8.1(4)

4.6

7.4(4)

5.7

3.2

6.7

204

15.0(4)

21.9(4)

18.5(4)

17.0(4)

14.6(4)

9.1(4)

7.4(4)

4.1

7.4(4)

5.2

2.8

6.7

260

14.6(4)

21.9(4)

18.5(4)

17.0(4)

14.6(4)

9.1(4)

7.2(4)

3.9

7.4(4)

5.1

2.8

6.6

316

13.9(4)

21.9(4)

18.5(4)

17.0(4)

14.6(4)

9.1(4)

7.0(4)

3.8

7.4(4)

4.9

2.6

6.4

371

13.3(4)

21.9(4)

18.5(4)

16.8(4)

14.6(4)

9.1(4)

6.8

3.7

7.4(4)

4.8

2.6

6.3

427

12.6(4)

21.9(4)

18.5(4)

16.3(4)

14.6(4)

9.1(4)

6.6

3.4

7.4(4)

4.6

2.3

6.1

-46 to 149

19.7(4)

21.9(4)

18.5(4)

17.0(4)

14.6(4)

9.1(4)

9.0(4)

5.3

7.4(4)

5.7

3.8

6.7

204

18.2(4)

21.9(4)

18.5(4)

17.0(4)

14.6(4)

9.1(4)

8.5(4)

4.9

7.4(4)

5.7

3.5

6.7

260

17.3(4)

21.9(4)

18.5(4)

17.0(4)

14.6(4)

9.1(4)

8.2(4)

4.7

7.4(4)

5.7

3.3

6.7

316

16.8(4)

21.9(4)

18.5(4)

17.0(4)

14.6(4)

9.1(4)

8.1(4)

4.6

7.4(4)

5.7

3.2

6.7

371

15.9(4)

21.9(4)

18.5(4)

17.0(4)

14.6(4)

9.1(4)

7.7(4)

4.3

7.4(4)

5.4

3.0

6.7

427

15.0(4)

21.9(4)

18.5(4)

17.0(4)

14.6(4)

9.1(4)

7.4(4)

4.1

7.4(4)

5.2

2.8

6.7

-29 to 149

12.3(4)

11.0(4)

9.2(4)

8.5(4)

7.3(4)

4.6

4.6

3.5

3.7

2.8

3.0

3.3

204

12.3(4)

11.0(4)

9.2(4)

8.5(4)

7.3(4)

4.6

4.6

3.5

3.7

2.8

2.8

3.3

260

12.3(4)

11.0(4)

9.2(4)

8.5(4)

7.3(4)

4.6

4.6

3.5

3.7

2.8

2.8

3.3

316

12.3(4)

11.0(4)

9.2(4)

8.5(4)

7.3(4)

4.6

4.6

3.5

3.7

2.8

2.6

3.3

371

12.3(4)

11.0(4)

9.2(4)

8.5(4)

7.3(4)

4.6

4.6

3.5

3.7

2.8

2.6

3.3

427

12.3(4)

11.0(4)

9.2(4)

8.5(4)

7.3(4)

4.6

4.6

3.4

3.7

2.8

2.3

3.3

Forward

-29 to 427

12.3

11.0

9.2

8.5

7.3

4.6

4.6

3.5

3.7

2.8

3.0

3.3

Reverse

-29 to 427

6.9

6.9

6.9

6.9

6.9

4.6

4.6

3.5

3.7

2.8

3.0

3.3

Forward or
reverse

-29 to 49
66
93
121
149
191
204
232

52.4
52.4
43.0
38.6
28.7
13.8
10.3
3.4

60.4
58.5
43.0
38.6
28.7
13.8
10.3
3.4

50.3
50.3
43.0
38.6
28.7
13.8
10.3
3.4

57.9
57.9
43.0
38.6
28.7
13.8
10.3
3.4

51.4
51.4
43.0
38.6
28.7
13.8
10.3
3.4

33.4
33.4
33.4
33.4
28.7
13.8
10.3
3.4

33.8
33.8
33.8
33.8
28.7
13.8
10.3
3.4

Forward or
reverse

Forward or
reverse

Forward or
reverse

Forward or
reverse

1. Based on valve body assembly material strengths onlyactuator torque not considered.
2. This trim not available in the NPS 2, 3, and 4 valves.
3. For hot water or steam service, limit maximum temperature to 207C.
4. Reverse pressure drop is limited to 6.9 bar.

12

8510

---

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Table 7. Maximum Allowable Shutoff Pressure Drops(1) in Psi for Steel Valve Body Material
TABLE 4
OR 5 TRIM
NUMBER

1(2), 2, 3, 4,
NT3

5(2), 6, 7, 8

9(2), 10

11

12

13

14

15

FLOW
DIRECTION

Forward or
reverse

MAX ALLOWABLE SHUTOFF P

(PER VALVE BODY SIZE, NPS)

TEMP. F
-20 to 120
150
200
250
300
375
400

8510B

8510

10

12

14

16

18

20

24

816
816
704
560
416
200
150

935
848
704
560
416
200
150

780
780
704
560
416
200
150

840
840
704
560
416
200
150

792
792
704
560
416
200
150

547
547
547
547
416
200
150

600
600
600
560
416
200
150

285
275
260
245
230
200
150

285
275
260
245
230
200
150

285
275
260
245
230
200
150

285
275
260
245
230
200
150

285
275
260
245
230
200
150

450(3)

50

50

50

50

50

50

50

50

50

50

50

50

Forward

-20 to 450(3)

740

740

740

740

450

250

250

150

150

150

150

150

Reverse

-20 to 450(3)

100

100

100

100

100

100

100

100

100

100

100

100

-20 to 300

285(4)

457(4)

417(4)

307(4)

353(4)

194(4)

131(4)

77

145(4)

93

55

115(4)

400

264(4)

434(4)

397(4)

293(4)

353(4)

185(4)

124(4)

71

138(4)

88

51

109(4)

500

251(4)

419(4)

384(4)

284(4)

353(4)

179(4)

119(4)

68

133(4)

84

48

106(4)

600

244(4)

411(4)

377(4)

279(4)

348(4)

175(4)

117(4)

66

131(4)

83

47

104(4)

700

231(4)

396(4)

364(4)

270(4)

338(4)

169(4)

112(4)

62

127(4)

79

44

101(4)

800

218(4)

381(4)

351(4)

260(4)

328(4)

163(4)

107(4)

59

122(4)

78

41

97(4)

-20 to 200

285(4)

318(4)

268(4)

246(4)

212(4)

132(4)

130(4)

76

107(4)

82

54

97

300

248(4)

318(4)

268(4)

246(4)

212(4)

132(4)

118(4)

67

107(4)

82

47

97

400

218(4)

318(4)

268(4)

246(4)

212(4)

132(4)

107(4)

59

107(4)

75

41

97

500

212(4)

318(4)

268(4)

246(4)

212(4)

132(4)

105(4)

57

107(4)

74

40

96

600

201(4)

318(4)

268(4)

246(4)

212(4)

132(4)

102(4)

55

107(4)

71

38

93

700

193(4)

318(4)

268(4)

246(4)

212(4)

132(4)

99

53

107(4)

69

37

91

800

183(4)

318(4)

268(4)

236(4)

212(4)

132(4)

95

50

107(4)

66

34

88

-20 to 300

285(4)

318(4)

268(4)

246(4)

212(4)

132(4)

131(4)

77

107(4)

82

55

97

400

264(4)

318(4)

268(4)

246(4)

212(4)

132(4)

124(4)

71

107(4)

82

51

97

500

251(4)

318(4)

268(4)

246(4)

212(4)

132(4)

119(4)

68

107(4)

82

48

97

600

244(4)

318(4)

268(4)

246(4)

212(4)

132(4)

117(4)

66

107(4)

82

47

97

700

231(4)

318(4)

268(4)

246(4)

212(4)

132(4)

112(4)

62

107(4)

79

44

97

800

218(4)

318(4)

268(4)

246(4)

212(4)

132(4)

107(4)

59

107(4)

75

41

97

-20 to 300

178(4)

159(4)

134(4)

123(4)

106(4)

66

67

51

53

41

44

48

400

178(4)

159(4)

134(4)

123(4)

106(4)

66

67

51

53

41

41

48

500

178(4)

159(4)

134(4)

123(4)

106(4)

66

67

51

53

41

40

48

600

178(4)

159(4)

134(4)

123(4)

106(4)

66

67

51

53

41

38

48

700

178(4)

159(4)

134(4)

123(4)

106(4)

66

67

51

53

41

37

48

800

178(4)

159(4)

134(4)

123(4)

106(4)

66

67

50

53

41

34

48

Forward

-20 to 800

178

159

134

123

106

66

67

51

53

41

44

48

Reverse

-20 to 800

100

100

100

100

100

66

67

51

53

41

44

48

Forward or
reverse

-20 to 120
150
200
250
300
375
400
450

760
760
704
560
416
200
150
50

876
848
704
560
416
200
150
50

730
730
704
560
416
200
150
50

840
840
704
560
416
200
150
50

746
746
704
560
416
200
150
50

484
484
484
484
416
200
150
50

490
490
490
490
416
200
150
50

Forward or
reverse

Forward or
reverse

Forward or
reverse

Forward or
reverse

---

1. Based on valve body assembly material strengths onlyactuator torque not considered.
2. This trim not available in the NPS 2 and 3 valves.
3. For hot water or steam service, limit maximum temperature to 405F.
4. Reverse pressure drop is limited to 100 psi.

13

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Table 8. Maximum Allowable Shutoff Pressure Drops(1) in Bar for Stainless Steel Valve Body Material
TABLE 4
OR 5
TRIM
NUMBER

3, 4,
NT3

7
8

11x7.4(3)

12

13

14

FLOW
DIRECTION

Forward or
reverse

MAX ALLOWABLE SHUTOFF P

(PER VALVE BODY SIZE, NPS)

TEMP. C
-46 to 49
66
93
121
149
191
204

8510B
3

10

12

14

16

18

20

24

56.2
56.2
48.5
38.6
28.7
13.8
10.3

64.5
58.5
48.5
38.6
28.7
13.8
10.3

53.8
53.8
48.5
38.6
28.7
13.8
10.3

57.9
57.9
48.5
38.6
28.7
13.8
10.3

54.6
54.6
48.5
38.6
28.7
13.8
10.3

37.7
37.7
37.7
37.7
28.7
13.8
10.3

41.4
41.4
41.4
38.6
28.7
13.8
10.3

19.7
19.0
17.9
16.9
15.5
13.8
10.3

19.7
19.0
17.9
16.9
15.5
13.8
10.3

19.7
19.0
17.9
16.9
15.5
13.8
10.3

19.7
19.0
17.9
16.9
15.5
13.8
10.3

19.7
19.0
17.9
16.9
15.5
13.8
10.3

232(2)

3.4

3.4

3.4

3.4

3.4

3.4

3.4

3.4

3.4

3.4

3.4

3.4

Forward

-46 to 232(2)

51.0

51.0

51.0

51.0

31.0

17.2

17.2

10.3

10.3

10.3

10.3

10.3

Reverse

-46 to 232(2)

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

Forward

-46 to 232(2)

51.0

51.0

51.0

51.0

31.0

17.2

17.2

10.3

10.3

10.3

10.3

10.3

Reverse

-46 to 232(2)

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

6.9

-46 to 93

19.7(3)

21.9(3)

18.5(3)

17.0(3)

14.6(3)

9.1(3)

9.0(3)

5.2

7.4(3)

5.7

3.7

6.7

149

17.1(3)

21.9(3)

18.5(3)

17.0(3)

14.6(3)

9.1(3)

8.1(3)

4.6

7.4(3)

5.7

3.2

6.7

204

15.0(3)

21.9(3)

18.5(3)

17.0(3)

14.6(3)

9.1(3)

7.4(3)

4.1

7.4(3)

5.2

2.8

6.7

260

14.6(3)

21.9(3)

18.5(3)

17.0(3)

14.6(3)

9.1(3)

7.2(3)

3.9

7.4(3)

5.1

2.8

6.6

316

13.9(3)

21.9(3)

18.5(3)

17.0(3)

14.6(3)

9.1(3)

7.0(3)

3.8

7.4(3)

4.9

2.6

6.4

371

13.3(3)

21.9(3)

18.5(3)

16.8(3)

14.6(3)

9.1(3)

6.8

3.7

7.4(3)

4.8

2.6

6.3

427

12.6(3)

21.9(3)

18.5(3)

16.3(3)

14.6(3)

9.1(3)

6.6

3.4

7.4(3)

4.6

2.3

6.1

482

11.9(3)

21.9(3)

18.5(3)

15.8(3)

14.6(3)

9.1(3)

6.3

3.2

7.3(3)

4.3

2.2

5.9

438

11.1(3)

21.9(3)

18.5(3)

15.2(3)

14.6(3)

9.1(3)

6.1

3.0

7.0(3)

4.1

2.1

5.7

-46 to 149

19.7(3)

21.9(3)

18.5(3)

17.0(3)

14.6(3)

9.1(3)

9.0(3)

5.3

7.4(3)

5.7

3.8

6.7

204

18.2(3)

21.9(3)

18.5(3)

17.0(3)

14.6(3)

9.1(3)

8.5(3)

4.9

7.4(3)

5.7

3.5

6.7

260

17.3(3)

21.9(3)

18.5(3)

17.0(3)

14.6(3)

9.1(3)

8.2(3)

4.7

7.4(3)

5.7

3.3

6.7

316

16.8(3)

21.9(3)

18.5(3)

17.0(3)

14.6(3)

9.1(3)

8.1(3)

4.6

7.4(3)

5.7

3.2

6.7

371

15.9(3)

21.9(3)

18.5(3)

17.0(3)

14.6(3)

9.1(3)

7.7(3)

4.3

7.4(3)

5.4

3.0

6.7

427

15.0(3)

21.9(3)

18.5(3)

17.0(3)

14.6(3)

9.1(3)

7.4(3)

4.1

7.4(3)

5.2

2.8

6.7

-46 to 149

12.3(3)

11.0(3)

9.2(3)

8.5(3)

7.3(3)

4.6

4.6

3.5

3.7

2.8

3.0

3.3

204

12.3(3)

11.0(3)

9.2(3)

8.5(3)

7.3(3)

4.6

4.6

3.5

3.7

2.8

2.8

3.3

260

12.3(3)

11.0(3)

9.2(3)

8.5(3)

7.3(3)

4.6

4.6

3.5

3.7

2.8

2.8

3.3

316

12.3(3)

11.0(3)

9.2(3)

8.5(3)

7.3(3)

4.6

4.6

3.5

3.7

2.8

2.6

3.3

371

12.3(3)

11.0(3)

9.2(3)

8.5(3)

7.3(3)

4.6

4.6

3.5

3.7

2.8

2.6

3.3

427

12.3(3)

11.0(3)

9.2(3)

8.5(3)

7.3(3)

4.6

4.6

3.4

3.7

2.8

2.3

3.3

482

11.9(3)

11.0(3)

9.2(3)

8.5(3)

7.3(3)

4.6

4.6

3.2

3.7

2.8

2.2

3.3

538

11.1(3)

11.0(3)

9.2(3)

8.5(3)

7.3(3)

4.6

4.6

3.0

3.7

2.8

2.1

3.3

Forward

-46 to 371

12.3

11.0

9.2

8.5

7.3

4.6

4.6

3.5

3.7

2.8

3.0

3.3

Reverse

-46 to 371

6.9

6.9

6.9

6.9

6.9

4.6

4.6

3.5

3.7

2.8

3.0

3.3

Forward or
reverse

Forward or
reverse

Forward or
reverse

1. Based on valve body assembly material strengths onlyactuator torque not considered.
2. For hot water or steam service, limit maximum temperature to 207C.
3. Reverse pressure drop is limited to 6.9 bar.

14

8510

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Table 9. Maximum Allowable Shutoff Pressure Drops(1) in Psi for Stainless Steel Valve Body Material
TABLE 4
OR 5
TRIM
NUMBER

3, 4,
NT3

7
8

11

12

13

14

FLOW
DIRECTION

Forward or
reverse

MAX ALLOWABLE SHUTOFF P

(PER VALVE BODY SIZE, NPS)

TEMP. F
-50 to 120
150
200
250
300
375
400

8510B

8510

10

12

14

16

18

20

24

816
816
704
560
416
200
150

935
848
704
560
416
200
150

780
780
704
560
416
200
150

840
840
704
560
416
200
150

792
792
704
560
416
200
150

547
547
547
547
416
200
150

600
600
600
560
416
200
150

275
257
240
227
215
200
150

275
257
240
227
215
200
150

275
257
240
227
215
200
150

275
257
240
227
215
200
150

275
257
240
227
215
200
150

450(2)

50

50

50

50

50

50

50

50

50

50

50

50

Forward

-50 to 450(2)

740

740

740

740

450

250

250

150

150

150

150

150

Reverse

-50 to 450(2)

100

100

100

100

100

100

100

100

100

100

100

100

Forward

-50 to 450(2)

740

740

740

740

450

250

250

150

150

150

150

150

Reverse

-50 to 450(2)

100

100

100

100

100

100

100

100

100

100

100

100

-50 to 200

285(3)

318(3)

268(3)

246(3)

212(3)

132(3)

130(3)

76

107(3)

82

54

97

300

248(3)

318(3)

268(3)

246(3)

212(3)

132(3)

118(3)

67

107(3)

82

54

97

400

218(3)

318(3)

268(3)

246(3)

212(3)

132(3)

107(3)

59

107(3)

75

41

97

500

212(3)

318(3)

268(3)

246(3)

212(3)

132(3)

105(3)

57

107(3)

74

40

96

600

201(3)

318(3)

268(3)

246(3)

212(3)

132(3)

102(3)

55

107(3)

71

38

93

700

193(3)

318(3)

268(3)

243(3)

212(3)

132(3)

99

53

107(3)

69

37

91

800

183(3)

318(3)

268(3)

236(3)

212(3)

132(3)

95

50

107(3)

66

34

88

900

172(3)

318(3)

268(3)

229(3)

212(3)

132(3)

91

47

106(3)

63

32

85

1000

161(3)

318(3)

268(3)

221(3)

212(3)

132(3)

88

44

102(3)

60

30

82

-50 to 300

285(3)

318(3)

268(3)

246(3)

212(3)

132(3)

131(3)

77

107(3)

82

55

97

400

264(3)

318(3)

268(3)

246(3)

212(3)

132(3)

124(3)

71

107(3)

82

51

97

500

251(3)

318(3)

268(3)

246(3)

212(3)

132(3)

119(3)

68

107(3)

82

48

97

600

244(3)

318(3)

268(3)

246(3)

212(3)

132(3)

117(3)

66

107(3)

82

47

97

700

231(3)

318(3)

268(3)

246(3)

212(3)

132(3)

112(3)

62

107(3)

79

44

97

800

218(3)

318(3)

268(3)

246(3)

212(3)

132(3)

107(3)

59

107(3)

75

41

97

-50 to 300

178(3)

159(3)

134(3)

123(3)

106(3)

66

67

51

53

41

44

48

400

178(3)

159(3)

134(3)

123(3)

106(3)

66

67

51

53

41

41

48

500

178(3)

159(3)

134(3)

123(3)

106(3)

66

67

51

53

41

40

48

600

178(3)

159(3)

134(3)

123(3)

106(3)

66

67

51

53

41

38

48

700

178(3)

159(3)

134(3)

123(3)

106(3)

66

67

51

53

41

37

48

800

178(3)

159(3)

134(3)

123(3)

106(3)

66

67

50

53

41

34

48

900

172(3)

159(3)

134(3)

123(3)

106(3)

66

67

47

53

41

32

48

1000

161(3)

159(3)

134(3)

123(3)

106(3)

66

67

44

53

41

30

48

Forward

-50 to 800

178

159

134

123

106

66

67

51

53

41

44

48

Reverse

-50 to 800

100

100

100

100

100

66

67

51

53

41

44

48

Forward or
reverse

Forward or
reverse

Forward or
reverse

1. Based on valve body assembly material strengths onlyactuator torque not considered.
2. For hot water or steam service, limit maximum temperature to 405F.
3. Reverse pressure drop is limited to 100 psi.

15

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Table 10. Maximum Allowable Forward and Reverse Shutoff Pressure Drops(1) for Alloy Valve Body Materials
ALLOY VALVE
BODY
MATERIAL

TABLE 5
TRIM
NUMBER

MAX ALLOWABLE SHUTOFF P

(PER VALVE BODY SIZE, NPS)
8510B

TEMPERATURE
2

10

12

Bar

Psi

Bar

Psi

Bar

Psi

Bar

Psi

Bar

Psi

Bar

Psi

Bar

Psi

-50 to 120
200
300
375
400
450

52.4
40.3
25.2
13.8
10.3
3.4

760
584
365
200
150
50

60.4
45.8
27.5
13.8
10.3
3.4

876
664
399
200
150
50

50.3
38.9
24.5
13.8
10.3
3.4

730
564
356
200
150
50

57.9
44.1
26.8
13.8
10.3
3.4

840
639
388
200
150
50

51.4
39.6
24.8
13.8
10.3
3.4

746
575
360
200
150
50

33.4
27.2
19.6
13.8
10.3
3.4

484
395
284
200
150
50

33.8
27.5
19.7
13.8
10.3
3.4

490
399
285
200
150
50

-50 to 120
150
200
300

18.6
18.1
17.1
15.2

270
262
248
221

33.2
31.0
27.1
19.5

482
449
393
283

34.3
31.9
27.9
19.8

497
462
404
287

24.0
22.8
20.8
16.8

348
331
302
244

32.1
29.9
26.3
19.2

465
434
382
278

16.8
16.5
15.9
14.7

244
239
230
213

12.7
-------

184
-------

M35-1

15

-46 to 49
93
149
191
204
232

Alloy 20
CN7M

17

-46 to 49
66
93
149

1. Based on valve body assembly material strengths onlyactuator torque not considered.

Table 11. Material Temperature Capabilities

VALVE BODY
MATERIAL

TABLE 4 OR 5
TRIM NUMBER

PACKING
All

-29 to 232(1)

-20 to 450(1)

PTFE V-ring or PTFE composition

-29 to 232

-20 to 450

Graphite ribbon

-29 to 427

-20 to 800

15

All

-29 to 232

-20 to 450

NT3

PTFE V-ring

-29 to 232(1)

-20 to 450(1)

3, 4, 8

PTFE V-ring
PTFE composition or graphite ribbon

-40 to 232(1)
-46 to 232(1)

-40 to 450(1)
-50 to 450(1)

PTFE V-ring
PTFE composition
Graphite ribbon

-40 to 232(1)
-46 to 232(1)
-46 to 232(1)

-40 to 450(1)
-50 to 450(1)
-50 to 450(1)

11, 13

PTFE V-ring
PTFE composition
Graphite ribbon

-40 to 232
-46 to 260
-46 to 538

-40 to 450(1)
-50 to 500
-50 to 1000

12, 14

PTFE V-ring
PTFE composition
Graphite ribbon

-40 to 232
-46 to 260
-46 to 427

-40 to 450
-50 to 500
-50 to 800

NT3

PTFE V-ring

-40 to 232(1)

-40 to 450(1)

M35-1

15

PTFE V-ring
PTFE composition or graphite ribbon

-40 to 232
-46 to 232

-40 to 450
-50 to 450

Alloy 20

17

PTFE V-ring
PTFE composition or graphite ribbon

-40 to 149
-46 to 149

-40 to 300
-50 to 300

1, 2, 3, 4, 5, 6, 7, 8
Steel

316 stainless
steel

9, 10, 11, 12, 13, 14

1. For hot water or steam service, limit maximum temperature to 207C (405F)

16

MATERIAL
TEMPERATURE CAPABILITY(1)
C
F

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Material Selection
Guidelines
Pick the valve body, trim, and other construction
materials from tables 3, 4, and 5, according to the
recommendations and limitations in tables 6, 7, 8, 9,
10, and 11. Also, make sure that the
pressure/temperature limits in the specifications table
and tables 1, 2, 6, 7, 8, 9, 10, and 11 are not exceeded.

b. Reducing or relief
2. Controlled fluid
3. Specific gravity of controlled fluid
4. Fluid temperature
5. Range of flowing inlet pressures
6. Pressure drops
a. Range of flowing pressure drops

Installation
As indicated in this bulletin, M35-1 valve bodies are not
ASME B16.34 or ASME code-approved materials. Valve
bodies constructed of M35-1 will mate with ASME
flanges, but are not included in ASME
pressure-temperature ratings and must not be
installed in systems requiring conformance to ASME
standards.
An 8510 and 8510B valve may be installed in any
position.

b. Maximum at shutoff
7. Flow rates
a. Minimum controlled flow
b. Normal flow
c. Maximum flow
8. Maximum permissible noise level, if critical
9. Line size and schedule

Dimensions are shown in figure 7.

Valve Information

Ordering Information
When ordering, specify:

Application
1. Type of application
a. Throttling or on/off

Refer to the Specifications table. Review the

information under each specification and in the
referenced tables. Indicate the choice wherever there
is a selection to be made.

Actuator and Accessory Information

Specify the desired actuator type and size from the
separate actuator bulletin. Also refer to the separate
actuator and accessory bulletins for additional
ordering information.

17

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Table 12. Dimensions for Fisher 8510 and 8510B

R

S
(SHAFT
DIA)

APPROXIMATE
WEIGHT(1)

102
119
162
202

103
127
159
217

12.7
15.9
19.1
25.4

117
117
152
152

----32
32

1/2-13
1/2-13
1/2-13
1/2-13

4.3
5.9
9.1
19

289
289
348
362

244
257
297
311

272
325
384
416

31.8
31.8
38.1
38.1

235
235
235
235

46
46
46
46

5/8-11
5/8-11
5/8-11
5/8-11

31
46
72
88

473
536
589
699

409
397
464
522

359
346
406
465

473
536
589
699

44.5
44.5
50.8
63.5

273
273
273
337

51
51
51
76

3/4-10
3/4-10
3/4-10
7/8-9

102
136
204
277

7.38
7.38
8.44
8.44

5.56
6.62
7.75
9.88

5.44
6.12
7.81
9.38

4.00
4.69
6.38
7.94

4.06
5.00
6.25
8.53

0.5
0.625
0.75
1

4.62
4.62
6.00
6.00

----1.25
1.25

1/2-13
1/2-13
1/2-13
1/2-13

9.5
13
20
41

7.50
9.50
11.25
12.94

8.19
8.19
8.19
8.19

12.50
14.88
17.25
16.38

11.38
11.38
13.69
14.25

9.62
10.12
11.69
12.25

10.69
12.81
15.12
16.38

1.25
1.25
1.5
1.5

9.25
9.25
9.25
9.25

1.81
1.81
1.81
1.81

5/8-11
5/8-11
5/8-11
5/8-11

69
102
158
194

14.81
16.81
18.50
22.19

14.00
14.00
14.00
14.00

18.62
21.12
23.19
27.50

16.12
15.62
18.25
20.56

14.12
13.62
16.00
18.31

18.62
21.12
23.19
27.50

1.75
1.75
2
2.5

10.75
10.75
10.75
13.25

2.00
2.00
2.00
3.00

3/4-10
3/4-10
3/4-10
7/8-9

225
300
450
610

VALVE
SIZE,
NPS

2
3
4
6

45
48
56
57

59
78
102
141

187
187
214
214

141
168
197
251

138
155
198
238

8
10
12
14

64
71
83
92

191
241
286
329

208
208
208
208

317
378
438
416

16
18
20
24

102
114
127
154

376
427
470
564

356
356
356
356

2
3
4
6

1.78
1.88
2.19
2.25

2.31
3.06
4.00
5.56

8
10
12
14

2.5
2.81
3.25
3.62

16
18
20
24

4.00
4.50
5.00
6.06

mm

kg

Inches

Pounds

1. Valve assembly only.

Table 13. Dimensions for Fisher 8510 and 8510B

DIN VALVE
BODY SIZE

RAISED FACE

A
FACE-TO-FACE

mm

mm

PN 10

PN 16

PN 25

PN 40-100

DN 50
DN 80
DN 100
DN 150

43
49
56
70

102
138
158
212

102
138
158
212

102
138
162
218

102
138
162
218

DN 200
DN 250
DN 300

71
76
83

268
320
370

268
320
378

278
335
395

285
345
410

Figure 7. Dimensions for Fisher 8510 and 8510B (also see tables 12 and 13)
R

A
U

S
F

W
G
41B6064-A
B2036-1

18

NPS 2 AND 3 NPS 4 THROUGH 24

Product Bulletin

8510/8510B Valve

51.6:edisc (EMA)
February 2013

D100066X012

Table 14. Dimensions for Fisher 8510B with Alternate Double D Shaft
VALVE
SIZE,
NPS

2
3
4
6
8
10
12

45
48
54
57
64
71
83

59
78
102
141
191
241
286

--83
83
83
83
89
89

141
168
197
251
317
378
438

138
155
198
238
289
289
348

102
119
162
202
244
257
297

2
3
4
6
8
10
12

1.78
1.88
2.12
2.25
2.50
2.81
3.19

2.31
3.06
4.00
5.56
7.50
9.50
11.25

--3.25
3.25
3.25
3.25
3.50
3.50

5.56
6.62
7.75
9.88
12.50
14.88
17.25

5.44
6.12
7.81
9.38
11.38
11.38
13.69

4.00
4.69
6.38
7.94
9.62
10.12
11.69

S
(SHAFT
DIA)

APPROXIMATE
WEIGHT(1)

103
127
159
217
272
325
384

--12.7
15.7
19.0
25.4
31.8
38.1

117
117
152
152
235
235
235

----32
32
46
46
46

1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11

4.3
5.9
9.1
19
31
46
72

4.06
5.00
6.25
8.53
10.69
12.81
15.12

--0.5
0.625
0.75
1
1.25
1.5

4.62
4.62
6.00
6.00
9.25
9.25
9.25

----1.25
1.25
1.81
1.81
1.81

1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11

mm

kg

Inches

Pounds
9.5
13
20
41
69
102
158

1. Valve assembly only.

Figure 8. Dimensions for Fisher 8510B with Alternate Double D Shaft (also see table 14)
R

39B8285-A
E0782

19

Product Bulletin
51.6:edisc (EMA)
February 2013

8510/8510B Valve
D100066X012

Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
Fisher and ENVIRO-SEAL are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co. Emerson
Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their
respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore

www.Fisher.com
E
201982, 2013 Fisher Controls International LLC. All rights reserved.