Model AV-1-300 Alarm Check Valve, 300 psi (20,7 bar)

2-1/2, 4, 6, & 8 Inch (DN65, DN100, DN150 & DN200)

Vertical or Horizontal* Installation
Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500
Email: techserv@tycofp.com
Page 1 of 22 OCTOBER 2009 TFP910
General
Description
The Tyco

Model AV-1-300 Alarm

Check Valves are divided seat ring,
rubber-faced clapper, waterow alarm
check valves that are intended for use
in wet pipe (automatic sprinkler) re
protection systems. They may be in-
stalled vertically or horizontally*, and
they are designed to automatically ac-
tuate electric and/or hydraulic alarms
when there is a steady ow of wa-
ter into the system that is equivalent
to the discharge rate of one or more
sprinklers.
A separately ordered Model RC-1 Re-
tard Chamber (TFP920) is required for
installations subject to variable pres-
sures. It is used to help prevent false
alarms associated with pressure vari-
ations in public water supplies.
The AV-1-300 Alarm Check Valve Trim
includes pressure gauges to moni-
tor system pressure conditions, a by-
pass check valve, a main drain valve,
and an alarm test valve. The bypass
check valve reduces the pos sibility of
false alarms by permitting slow as well
as small transient in creases in water
supply pressure to be passed through
to the system without opening the wa-
terway clapper.
NOTICE
The Model AV-1-300 Alarm Check
Valves described herein must be in-
stalled and maintained in compliance
with this document, as well as with the
applicable standards of the National
Fire Protection Association, in addi-
tion to the standards of any authori-
ties having jurisdiction. Failure to do
so may impair the integrity of these
devices.
The owner is responsible for maintain-
ing their re protection system and
de vices in proper operating condition.
The installing contractor or manufac-
turer should be contacted relative to
any questions.
* 4, 6, and 8 Inch (DN100, DN150, and DN200) Valve Sizes
Nominal
Valve Size
End Connections Available
Inlet x Outlet
Groove x Groove Flange x Groove Flange x Flange
2-1/2 Inch
(DN65)
22 lbs.
(10,0 Kg)
28 lbs.
(12,7 Kg)
N/A
4 Inch
(DN100)
45 lbs.
(20,4 Kg)
51 lbs.
(23,1 Kg)
62 lbs.
(28,1 Kg)
6 Inch
(DN150
68 lbs.
(30,9 Kg)
78 lbs.
(35,4 Kg)
93 lbs.
(42,2 Kg)
8 Inch
(DN200)
129 lbs.
(58,6 Kg)
148 lbs.
(67,1 Kg)
167 lbs.
(75,8 Kg)
TFP910
Page 2 of 22
5
7
6
8
10
11
2
12
9
3
10
4
13
1
5
11
6
7
8
10
CLAPPER
ASSEMBLY
2-1/2 INCH
VALVE
CLAPPER
ASSEMBLY
4, 6, & 8 INCH
VALVES
F x F valve shown for reference;
components for G x G and F x G
1.
NOTES:
valves are shared.
NR: Not Replaceable
CH: Common Hardware
2.
3.
2
1
3
7
4
5
6
8
(a)
(b)
10
11
9
12
13
Handhole Cover
Valve Body NR
NO. DESCRIPTION REF.
NR
See (a)
Handhole Cover
Gasket
See (a) or (b) Clapper Facing
Clapper Washer
VALVE PARTS
Seat Ring NR
See (b)
Lock Nut,
2-1/2 Inch Valve See (b)
Self-Locking Hex
Cap Screw, 4, 6, & 8
Inch Valves See (b)
REPLACEMENT PARTS
NO. DESCRIPTION P/N
92-200-1-416
92-200-1-620
92-200-1-816
92-200-1-216
92-200-1-218
See (b) Clapper Hinge Pin
Clapper Hinge
See (b) Clapper Spring
Pin Bushing,
2-1/2 Inch Valve NR
Valves
4, 6, & 8 Inch
NR
Clapper See (b)
92-200-1-423
92-200-1-623
92-200-1-823
Hex Bolt,
Handhole Cover
2-1/2 Inch Valve,
x 1-1/4" Long CH
NO. DESCRIPTION REF.
VALVE PARTS
1/2-13 UNC-2A
6 Inch Valve,
x 1-3/4" Long CH
1/2-13 UNC-2A
8 Inch Valve,
x 2" Long CH
3/4-10 UNC-2A
4, 6, & 8 Inch
Plug, 3/8" NPT,
Valves only CH
Square Head Pipe
Clapper Hinge Pin
4 Inch Valve,
x 1-3/4" Long CH
1/2-13 UNC-2A
Repair Parts Kit,
Includes 3 & 6
4 Inch Valve
6 Inch Valve
Clapper Assembly,
Includes 5-9, 11
4 Inch Valve
6 Inch Valve
8 Inch Valve
8 Inch Valve
2-1/2 Inch Valve
2-1/2 Inch Valve
Includes 5-11
1
QTY.
1
1
1
1
1
1
1
1
1
2
4
1
4
QTY.
6
6
1
4
. . . . . . .
. . .
. . . . . . . . . .
. . . .
. . . . . . . .
. . .
. . .
. . . . . . .
. .
. . . .
. . .
. . . . . . . . . . .
. . . . . . . . . .
. . . . .
. . . . .
. . . . . . . . .
. . . . . . .
. . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . .
. . . . . .
The 2-1/2 Inch (DN65) Valves with NPT threaded ports have a 1-1/4 inch main drain connection. The 2-1/2 Inch (DN65) Valves with
ISO threaded ports have a DN40 main drain connection.
The 4, 6, and 8 Inch (DN100. DN150, and DN200) Valves with NPT threaded ports have a 2 inch main drain connection. The 4, 6,
and 8 Inch (DN100. DN150, and DN200) Valves with ISO threaded ports have a DN50 inch main drain connection.
FIGURE 1
2-1/2, 4, 6 & 8 INCH (DN65, DN100, DN150 & DN200) MODEL AV-1-300 ALARM CHECK VALVE
ASSEMBLY
TFP910
Page 3 of 22
6

I
N
C
H

(
D
N
1
5
0
)
4

I
N
C
H

(
D
N
1
0
0
)
2
-
1
/
2

I
N
C
H

(
D
N
6
5
)
8

I
N
C
H

(
D
N
2
0
0
)
600 400 1000
FLOW RATE IN LITRES PER MINUTE (LPM)
FLOW RATE IN GALLONS PER MINUTE (GPM)
0.9
I
N

P
O
U
N
D
S

P
E
R

S
Q
U
A
R
E

I
N
C
H

(
P
S
I
)
300
0.8
0.7
500 400
N
O
M
I
N
A
L

P
R
E
S
S
U
R
E

D
R
O
P
1.0
2.0
3.0
4.0
2000
N
O
M
I
N
A
L

P
R
E
S
S
U
R
E

D
R
O
P

I
N

B
A
R
0,06
3000 700 1000 2000 4000
0,05
(
1

P
S
I

=

0
,
0
6
8
9
5

B
A
R
)
0,08
0,07
0,09
0,10
0,20
10000 5000
(1 GPM = 3,785 LPM)
3000 7000 15000
200 100
The approximate friction loss, based on the Hazen and Williams formula and expressed in equivalent length of pipe
with C=120, is as follows
14 feet of 2-1/2 inch Sch. 40 pipe for the 2-1/2 inch AV-1-300 Valve calculated on a typical flow rate of 250 GPM.
23 feet of 4 inch Sch. 40 pipe for the 4 inch AV-1-300 Valve calculated on a typical flow rate of 600 GPM.
24 feet of 6 inch Sch. 40 pipe for the 6 inch AV-1-300 Valve calculated on a typical flow rate of 1500 GPM.
23 feet of 8 inch Sch. 30 pipe for the 8 inch AV-1-300 Valve calculated on a typical flow rate of 2500 GPM.
Same drilling as for BS 4504 Section 3.2 (PN16) and DIN 2532 (PN16).
ANSI B16.1 AS 2129 ISO 2084 JIS B 2210
(Class 125) (Table E) (PN10) (10K)
A
7.50
9.50
(190,5)
(241,3)
B
0.75
0.88
(19,0)
(22,2)
7.00
9.25
(178,0)
(235,0)
0.71
0.87
(18,0)
(22,0)
6.89
(175,0)
0.91
(23,0)
Flange Drilling Specification
Nominal Dimensions in Inches and (mm)
0.75
(19,0)
9.45
(240,0)
11.75
(298,5)
0.88
(22,2)
11.50
(292,0)
0.87
(22,0)
11.61
(295,0)
0.91
(23,0)
11.42
(290,0)
5.50
(139,7)
0.75
(19,0)
5.00
(127,0)
5.51
(140,0)
0.87
(22,0)
0.71
(18,0)
0.75
(19,0)
4 Inch
6 Inch
(DN100)
(DN150)
8 Inch
(DN200)
2-1/2 Inch
(DN65)
N
4
8
8
8
A B N
8
ISO 2084
(PN16)
7.09
9.45
(180,0)
(240,0)
0.71
(18,0)
0.87
(22,0)
11.61
(295,0)
5.71
(145,0)
0.87
(22,0)
0.71
(18,0)
A B N
4
8
8
12
ISO 2084
(PN16)
USE
A B N
4
8
8
12
A B N
4
8
8
8
Dim. Dim. Qty. Dim. Dim. Qty. Dim. Dim. Qty. Dim. Dim. Qty. Dim. Dim. Qty.
Same drilling as for BS 4504 Section 3.2 (PN10) and DIN 2532 (PN10).
Dim. A
Bolt Circle
Diameter
Dim. B
Bolt Hole
Diameter
Qty. N
Number of
Bolt Holes
Valve
Nominal
Size
Same drilling as for B16.5 (Class 150) and B16.42 (Class 250).
2 3
2
3
1
1
GRAPH A
2-1/2, 4, 6 & 8 INCH (DN65, DN100, DN150 & DN200) MODEL AV-1-300 ALARM CHECK VALVE
NOMINAL PRESSURE LOSS VERSUS FLOW
TABLE A
FLANGE DRILLING SPECIFICATIONS
TFP910
Page 4 of 22
SCREEN
ORIFICE
ORIFICE
WITH 0.125" (3.2 mm)
DRAIN RESTRICTION
WITH 0.219" (5.6 mm)
INLET RESTRICTION
Technical
Data
Approvals
UL and C-UL Listed, as well as FM
Approved
Working Water Pressure Range
20 to 300 psi (1,4 to 20,7 bar)
Friction Loss
Refer to Graph A.
Physical Characteristics
The body is ductile iron, the hand-hole
cover is ductile iron, and the seat ring
is bronze. The clapper for the 2-1/2
inch (DN65) valve size is stainless
steel. The clapper for the larger valve
sizes is ductile iron. All valve sizes uti-
lize an EPDM clapper facing.
Flanged connections are available
drilled per ANSI, ISO, AS, and JIS
specications as detailed in Table A.
Threaded port connections for the AV-
1-300 Valves are available NPT thread-
ed or threaded per ISO 7/1 as detailed
in the Ordering Procedure section.
Valves with NPT threaded ports will
readily accept the trim arrangements
detailed in Figures 4 through 6.
Operation
When the re protection system is in-
itially pressurized, water ows into
the system until the water supply and
system pressure become equalized,
and the torsion Spring closes the Wa-
terway Clapper in the Alarm Check
Valve. Once the pressures stabilize,
the Alarm Check Valve is in service
and the centrally located groove in
the Seat Ring is sealed. Consequent-
ly, with the Alarm Check Valve set for
service, there is no ow through the
alarm port to the alarm devices (that
is, water motor alarm and/or pressure
alarm switch).
When there is a steady ow of wa-
ter into the sprinkler system due to
a sprinkler operation, the Waterway
Clapper opens as shown in Figure 2.
Water is then permitted to ow into
the centrally located groove in the
Seat Ring and out through the alarm
port towards the Re striction Assembly
(Figure 3). When the ow through the
Inlet Restriction of the Restriction As-
sembly exceeds the ow through the
Outlet Restriction, the Retard Cham-
ber (where provided for systems with
variable pressure), begins to ll.
Subsequently, the Water Motor alarm
and/or the pressure alarm switch will
be actuated. The alarms will continue
to be actuated as long as the Water-
way Clapper remains open. Water in
the alarm lines will automatically drain
out through the 1/8 inch (3,2 mm)
Drain Orice in the Restriction As-
sembly (Figure 3) when the Waterway
Clapper closes (due to a discontinua-
tion in the ow of water into the sprin-
kler system).
For variable pressure systems, slow
as well as small transient increases in
water supply pressure may continue to
build up in the system (via the Bypass
Check Valve) without opening the Wa-
terway Clapper.
A transient surge in supply pressure
that is sufcient only to open the Wa-
terway Clapper momentarily will not
cause a false alarm, and a portion
of the increase in pressure will be
trapped within the system, thus re-
ducing the possibility of another open-
ing. Any water in the alarm line is au-
tomatically drained, further reduc ing
the possibility of a false alarm due to
a successive transient surge in sup ply
pressure.
FIGURE 2
2-1/2, 4, 6 & 8 INCH (DN65, DN100, DN150 & DN200)
MODEL AV-1-300 ALARM CHECK VALVE
OPERATION
FIGURE 3
RESTRICTION ASSEMBLY
(Provided with Alarm Check Valve Trim)
PRESSURE
WATERFLOW
ALARM SWITCH
MOTOR ALARM
VALVE
RESTRICTION
(3,2 mm)
OUTLET
ORIFICE
RETARD CHAMBER
BEGINS TO FILL
INLET EXCEEDS OUTLET,
RESTRICTION ASSEMBLY
WHEN FLOW THROUGH
ASSEMBLY
1/8"
CHAMBER
RETARD
INLET
ALARM PORT
RING GROOVE AND
THROUGH SEAT
WATERFLOW
MAIN
DRAIN
ALARM ACTUATE
WATERFLOW PRESSURE
CHAMBER OVERFLOWS,
ONCE RETARD
WATER MOTOR
ALARM SWITCH AND
WATERFLOW
TO SYSTEM
WATERFLOW
TO WATER
7/32"
ORIFICE
(5,6 mm)
UPON SPRINKLER
FLOW, WATERWAY
CLAPPER OPENS
GAUGE
GAUGE
SUPPLY
PRESSURE
PRESSURE
SYSTEM
CHECK
VALVE
ALARM
TFP910
Page 5 of 22
Design
Criteria
In planning installation of the Tyco

Model AV-1-300 Alarm Check Valves,
consideration must be given to the
disposal of the large quantities of wa-
ter that may be associated with drain-
ing the system or performing a ow
test.
Valves installed in the vertical position
must have the ow going up. Valves
installed in the horizontal position
must be positioned so that the drain
connection points down.
The sprinkler system designer must
be aware that the conguration of the
pip ing network and its tendency to
trap pockets of air (such as in the case
of a peaked-roof gridded system) can
af fect the performance of the alarm
sys tem. Although a slight amount
of trapped air is desirable to prevent
signicant pressure increases due to
thermally induced expansion of the
water, a large quantity of trapped air in
a system may result in the possibility
of an intermittent alarm.
The possibility of an intermittent alarm
condition is a consequence of the fact
that the ow out of the system through
the test valve or a single sprinkler is
very small relative to the ow that can
be passed through the valve. This dif-
ference increases with valve size. If the
system were free of trapped air, ow in
would equal ow out and the Water-
way Clapper would always stabilize at
some open position (as needed to ac-
commodate the required ow). With
trapped air in the system, however,
the Waterway Clapper rst opens wid-
er since the system initially demands
greater ow until the air pockets are
compressed (back to nearly the sup-
ply pressure), and then it will tend to
return closer to the Seat Ring. If the
volume of the air pockets is excessive,
ow into the sys tem can be momen-
tarily reduced to nearly zero (once the
air pockets are compressed) and the
Waterway Clapper may close, causing
ow to the alarms to be shutoff.
After the Waterway Clapper has
closed, sufcient water must ow out
of the system before the Waterway
Clapper will again open. A repetition
of the above described condition is
termed an intermittent alarm.
Using a vent (which can also serve
as an end-of-line Inspectors Test
Connection) piped from the top of a
cross main or end of a branch line at
the point most remote from the alarm
valve, and lling the system slowly in
accordance with the steps described
in the Setting Procedure section, can
prevent an excessive amount of air
from being trapped.
Installation
NOTICE
Proper operation of the Tyco

Mod-
el AV-1-300 Alarm Check Valves de-
pends upon the trim described in this
data sheet installed in accordance
with the following instructions. Failure
to follow the appropriate trim installa-
tion instructions may prevent the de-
vice from functioning properly as well
as void listings/approvals and the
manufacturers warranties.
The Alarm Check Valves must be in-
stalled in readily visible and accessible
locations.
It is recommended that provision be
made for viewing the alarm line drain
water by locating the main drain outlet
in a readily visible area.
Wet pipe re protection systems must
be maintained at a minimum tempera-
ture of 40F/4C.
Step 1. Trim the Alarm Check Valve in
accordance with Figure 4, 5, or 6, as
applicable. Apply pipe-thread sealant
sparingly to male threads only.
Step 2. The Alarm Vent Trim illustrated
in Figure 8 must be installed if a water
motor alarm is not to be used.
Step 3. Plug unused alarm connec-
tions.
Step 4. Suitable provision must be
made for disposal of alarm line and
system drainage water. Drainage wa-
ter must be directed so that it will not
cause damage or result in danger ous
conditions.
Step 5. The alarm line drain must be
arranged so that there will be no dan-
ger of freezing.
Step 6. The check valve in the exter-
nally mounted bypass around the Wa-
terway Clapper must be installed with
its arrow pointed up, and the drain
check valve must be installed with its
arrow pointing towards the drain.
Step 7. It is recommended that a vent
connection (which may also be used
as an end-of-line Inspectors Test
Connection), be piped from a cross
main or branch line at the point most
remote from the alarm valve. The vent
line should be connected to the top of
a cross main or to the end of a branch
line and be located at the highest level
of a multi-level installation.
The vent connection can be used
to bleed-off excessive air from the
system, and therefore, minimize the
possibility of a false alarm due to a
transient surge in supply pressure.
The contraction/expansion associated
with an excessive amount of trapped
air could also cause the Waterway
Clapper to cycle open and shut
during an inspectors test or during a
discharge by a single sprinkler.
TFP910
Page 6 of 22
(NORMALLY
CLOSED)
DRAIN VALVE
3/4 INCH NPT
WATER MOTOR
ALARM
CONNECTION FOR
ORDERED
SYSTEMS)
PRESSURE
(FOR VARIABLE
SEPARATELY
ASSEMBLY,
SEE FIGURE 3
RESTRICTION
MAIN
RETARD
CHAMBER
MODEL RC-1
SWITCH
CONNECTION
PRESSURE ALARM
FOR WATERFLOW
1/2 INCH NPT
3/4 INCH NPT
FOR WATERFLOW
SWITCH
PRESSURE ALARM
ALARM
CONNECTION FOR
WATER MOTOR
CONNECTION
1/2 INCH NPT
GAUGE
GROOVE x GROOVE
1-1/4 INCH NPT
CONNECTION
TO DRAIN
2-1/2 INCH (DN65)
SHOWN
ALARM VALVE,
MODEL AV-1
TEST TUBE
(NORMALLY
CLOSED)
BY-PASS
TUBE
EXTERNAL
ALARM
TEST VALVE
ALARM
SYSTEM
PRESSURE
SUPPLY
PRESSURE
GAUGE
15 13 22 22
22
6
22
22
5
18
4
21
22 3
19
29
7
28
24 27
16
23
26
20
17
14
2
12
2
3
16
10
11
8
11
23
22
25
17
20
10
9
1
12
1
LOCATION
ELECTRICALLY
SUPERVISED
FOR OPTIONAL
CONTROL
VALVE
N.O. ALARM
VALVE
N.O. ALARM
LOCATION
SUPERVISED
CONTROL
FOR OPTIONAL
ELECTRICALLY
(Standard Order).
All Fittings and Nipples are galvanized
CH: Common Hardware.
1.
2.
NOTES:
1-1/4" Angle Valve
Alarm Test Tube
Connector
Connector
1/2" Union
1/4" 90 Elbow
1/4" Plug
1/2" NPT x 5/8" Tube
External By-Pass Tube
Restriction Assembly
1/2" NPT x 1/2" Tube
12
14
13
6
300 psi/ 2000 kPa 1
1/2" Globe Valve 4 . . . . . . . 1 46-047-1-004
10
1/2" Y-Strainer 5
11
52-353-1-005 1 . . . . . . . . .
Water Pressure Gauge
1/4" Gauge Test Valve
1/2" Swing Check Valve
2
3
8
2 46-005-1-002 . .
46-049-1-004 . 2
9
92-343-1-005 2 . .
7
DESCRIPTION NO. P/N QTY.
CH 2 . . . . . . . . . . . . .
CH 1 . . . . . . . . .
1 . . . . . . . . . . . . CH
CH . . . . . . . . . 1 15
92-210-2-005 . . . . 1
1/2" 90 Elbow
CH 1-1/4" x 1-1/4" x 1/2" Tee 19 1
2 . . . . . . . . . . . . CH
2 . . . . . . . . . . . . CH
17
92-304-1-017 . . 1
1 . . . . . . .
18
92-304-1-047
1 . . . . . .
16
46-048-1-007
CH . . . . 2 1/2" x 1/4" x 1/2" Tee
. . . . 1/2" x 1/2" x 3/4" Tee CH 1
. . . . . . . . . . . . . . 1/2" Tee CH 2
P/N
CH . . . . . 7 22 1/2" x 1-1/2" Nipple
. . . . . . . . CH 1 27 1/2" x 6" Nipple
1-1/4" x 3-1/2" Nipple 29 . . . . CH 1
1-1/4" x 2-1/2" Nipple 28 CH 1 . . . .
CH . . . . . 1 24 1/2" x 2-1/2" Nipple
1/2" x 4" Nipple
1/2" x 3" Nipple
26
25
CH . . . . . . . . 1
CH . . . . . . . . 1
1/2" x 2" Nipple 23 CH . . . . . . . . 2
CH . . . . . . . . 2 20 1/4" x 1" Nipple
1/4" x 2-1/2" Nipple 21 CH . . . . . 1
DESCRIPTION NO. QTY.
FIGURE 4 PART 1 OF 3
VERTICAL CLOSED DRAIN TRIM STANDARD ORDER
FOR 2-1/2 INCH (DN65) MODEL AV-1-300 ALARM CHECK VALVES (52-204-2-050)
TFP910
Page 7 of 22
CH 2 2" x 3" Nipple. . . . . . . . . . 29
CH 1 17 1/4" x Close Nipple . . . . .
Restriction Assembly 6 . . . . 1 92-210-2-005
1/2" x 1-1/2" Nipple
. . . . . . . .
. . . . . . . .
1/2" x Close Nipple
. . . . . . . .
Bushing
1/2" Union
2" Angle Valve
1/2" x 1/4" Reducing
1/4" Plug
10
8
9
7 46-048-1-009
. . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . .
CH 1
CH 3
CH 2
1
1/2" x 2" Nipple
1/2" x 3" Nipple
1/4" x 4" Nipple
21
22
19
20
18
CH
CH
CH
CH
CH
2
2
. . . . .
. . . . . 4
5
1
1/2" x 1/4" x 1/2" Tee
1/2" x 1/2" x 3/4" Tee
. . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . .
2" x 2" x 1/2" Tee
1/2" Globe Valve
1/2" Swing Check Valve
Water Pressure Gauge
300 psi/ 2000 kPa
DESCRIPTION
1/2" Y-Strainer
1/4" Gauge Test Valve
3
5
4
2
1
NO.
46-047-1-004
46-049-1-004
92-343-1-005
52-353-1-005
46-005-1-002
. . . . . . .
. . . . . . . . .
2 .
1
1
2 . .
2 . .
P/N QTY.
1/2" 90 Elbow
1/2" 45 Elbow
1/2" Tee
14
16
15
12
13
11
QTY.
CH
CH
CH
CH
CH
CH
1 . . . .
. . . . . . . 1
1
. . . .
1
1
4
1/2" x 6-1/2" Nipple
1/2" x 5" Nipple
1/2" x 3-1/2" Nipple
Select Nipple per Table
Select Nipple per Table
1/2" x 5-1/2" Nipple
26
28
27
24
25
23
. . . . .
. .
. .
. . . . . . . .
. . . . .
. . . . .
DESCRIPTION NO.
1 CH
2 CH
2 CH
CH 1
1 CH
1 CH
P/N
WATER MOTOR
3/4 INCH NPT
CONNECTION FOR
(6 INCH VALVE)
(4 INCH VALVE)
1/2" x 2-1/2"
1/2" x 1-1/2"
SEPARATELY
PRESSURE
SYSTEMS)
(FOR VARIABLE
SEE FIGURE 3
RESTRICTION
ASSEMBLY,
CHAMBER
FOR WATERFLOW
PRESSURE ALARM
MODEL RC-1
RETARD
ORDERED
1/2 INCH NPT
ALARM
SWITCH
FOR WATERFLOW
PRESSURE ALARM
CONNECTION
3/4 INCH NPT
WATER MOTOR
CONNECTION FOR
SWITCH
1/2 INCH NPT
CONNECTION
ALARM
2 INCH NPT
CONNECTION
TO DRAIN
(NORMALLY
DRAIN VALVE
CLOSED)
MAIN
MODEL AV-1
ALARM VALVE,
FLANGE x FLANGE
6 INCH (DN150)
SHOWN
PRESSURE
PRESSURE
ALARM
(6 INCH VALVE)
(4 INCH VALVE)
or
TEST VALVE
CLOSED)
(NORMALLY
or
1/2" x 4-1/2"
1/2" x 3-1/2"
GAUGE
SUPPLY
GAUGE
SYSTEM
K
H
M
N
C
A
L
B
D
E
I
G
J
F
LOCATION
CONTROL
FOR OPTIONAL
SUPERVISED
ELECTRICALLY
N.O. ALARM
VALVE
N.O. ALARM
VALVE
LOCATION
ELECTRICALLY
SUPERVISED
CONTROL
FOR OPTIONAL
11
19 19 20 3
6
19
10
7
20
22
21
12
20
11
19
14
26
5
15
20
11
16
29
29
10
24
3 20
13
17
4
10
25
27
23
28
21
11
22
2
8
18
1
2
9
8
1
per AV-1 Alarm Check Valve Size
Select Appropriate Nipple Sizes
4 Inch (DN100)
1/2" x 1-1/2"
1/2" x 3-1/2"
Number
27
28
Nipple
6 Inch (DN150)
1/2" x 2-1/2"
1/2" x 4-1/2"
All Fittings and Nipples are galvanized
Install subassemblies in alphabetical order.
(Standard Order).
CH: Common Hardware. 3.
NOTES:
1.
2.
FIGURE 4 PART 2 OF 3
VERTICAL CLOSED DRAIN TRIM STANDARD ORDER SEMI-PREASSEMBLED
FOR 4 & 6 INCH (DN100 & DN150) MODEL AV-1-300 ALARM CHECK VALVES (52-204-2-951)
TFP910
Page 8 of 22
FIGURE 4 PART 3 OF 3
VERTICAL CLOSED DRAIN TRIM STANDARD ORDER SEMI-PREASSEMBLED
FOR 8 INCH (DN200) MODEL AV-1-300 ALARM CHECK VALVES (52-204-2-952)
17
6
2" x 2" x 1/2" Tee
1/2" Y-Strainer 52-353-1-005 . . . . . . . . . 1
CH . . . . . . . 1
3/4" x 2-1/2" Nipple
28
. . . . . 1 CH
1/4" x 1-1/2" Nipple
1/2" x 1-1/2" Nipple
1/2" x Close Nipple
Restriction Assembly
1/2" Union
2" Angle Valve
1/4" Plug
10
8
9
7 92-210-2-005
46-048-1-009
. . . .
. . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . .
CH 2
CH
1
2
1
21
19
20
18
1/2" x 2" Nipple
. . . . . . .
. . . . . . . . . .
. . . . . . . .
. . . . .
CH
CH
CH
CH
. . . . . . . . 1
. . . . .
. . . . .
. . . . .
3
3
2
2" x 3-1/2" Nipple
2" x 3" Nipple
3/4" x 3" Nipple
3/4" x 4-1/2" Nipple
32
30
31
29
CH 1
CH
CH
CH 1
1
1
3/4" x 1/4" x 3/4" Tee
. . . . . . . . .
. . . . . . . . .
3/4" x 3/4" x 1/2" Tee
. . . . . . . . . . . . . .
. . . . . . . . . . . .
1/2" Globe Valve
1/2" Swing Check Valve
Water Pressure Gauge
300 psi/ 2000 kPa
DESCRIPTION
1/4" Gauge Test Valve
3/4" Swing Check Valve
3
5
4
2
1
NO.
46-047-1-004
46-049-1-004
92-343-1-005
46-005-1-002
46-049-1-005
. . . . . . .
1 .
1
1 .
2 . .
2 . .
P/N QTY.
14
16
15
12
13
11
1/2" Tee
1/2" 90 Elbow
1/2" 45 Elbow
3/4" Union
. . . . . . . .
. . . . .
QTY.
. . . . .
. . . . .
. . . . .
. . . . .
CH
CH
CH
CH
CH
CH
1
. . . .
. . . .
1
2
2
1
1
1/2" x 3" Nipple
1/2" x 3-1/2" Nipple
3/4" x 1-1/2" Nipple
1/2" x 6-1/2" Nipple
1/2" x 4-1/2" Nipple
3/4" x Close Nipple
25
27
26
23
24
DESCRIPTION NO.
CH 1
CH
CH
1
2
CH
CH
CH
2
2
1
P/N
CH 1/2" x 1/2" x 3/4" Tee. . . . 1
33
22
(NORMALLY
DRAIN VALVE
CLOSED)
SEPARATELY
PRESSURE
SYSTEMS)
(FOR VARIABLE
SEE FIGURE 3
RESTRICTION
ASSEMBLY,
MAIN
CHAMBER
FOR WATERFLOW
PRESSURE ALARM
MODEL RC-1
RETARD
ORDERED
SWITCH
1/2 INCH NPT
CONNECTION
1/2 INCH NPT
FOR WATERFLOW
PRESSURE ALARM
WATER MOTOR
ALARM
3/4 INCH NPT
CONNECTION FOR
CONNECTION
SWITCH
3/4 INCH NPT
ALARM
WATER MOTOR
CONNECTION FOR
SUPPLY
2 INCH NPT
CONNECTION
TO DRAIN
MODEL AV-1
ALARM VALVE,
FLANGE x GROOVE
8 INCH (DN200)
SHOWN
PRESSURE
GAUGE
ALARM
(NORMALLY
TEST VALVE
CLOSED)
SYSTEM
PRESSURE
GAUGE
E
H
J
K
A
I
F
D
G
C
B
LOCATION
CONTROL
FOR OPTIONAL
SUPERVISED
ELECTRICALLY
N.O. ALARM
VALVE
N.O. ALARM
VALVE
LOCATION
ELECTRICALLY
SUPERVISED
CONTROL
FOR OPTIONAL
3 20
12
20 21
7
10
21
8
21
23
13
6
20
15
26
14
19
18
33
32
28
17
16
2
9
9
2
24
25
10
25
5
24
12
22
27
30
29
11
4
31
27
16
19
1
1
All Fittings and Nipples are galvanized
Install subassemblies in alphabetical order.
NOTES:
3.
1.
2.
(Standard Order).
CH: Common Hardware.
TFP910
Page 9 of 22
FIGURE 5 PART 1 OF 3
VERTICAL OPEN DRAIN TRIM SPECIAL ORDER
FOR 2-1/2 INCH (DN65) MODEL AV-1-300 ALARM CHECK VALVES (52-204-2-053)
1/2" Tee . . . . . . . . . . . . . . 2 CH 19
1 . . . . . . . 9
46-005-1-002
Alarm Test Tube
2 . . 2 1/4" Gauge Test Valve
92-304-1-047
21
22
20
26
29
30
28
27
25
24
23
32
31
Restriction Assembly
. . . . . . . . .
1/2" Swing Check Valve
1/2" Globe Valve
1/2" Y-Strainer
6
4
5
3
52-353-1-005
46-047-1-004
46-049-1-004
92-210-2-005 1 . . . .
. . . . . . . 1
1
1 .
. . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . .
1/2" NPT x 1/2" Tube
1/2" NPT x 5/8" Tube
15 Support Bracket
Drip Funnel 16
Connector
Support Bar
PVC Nipple
Jam Nut
Connector
13
14
12
11
10
1 92-343-1-006
92-343-1-007 1
CH
92-304-1-014
92-640-1-009
92-640-1-037
CH 2
1
1
1
2
. . . .
. . . .
. . . . .
. . . . .
. . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . .
. . . .
1/2" x 2-1/2" Nipple
1/2" x 3" Nipple
1/2" x 4" Nipple
1/2" x 5" Nipple
1-1/4" x 2-1/2" Nipple
1-1/4" x 8-1/2" Nipple
1-1/4" x 1-1/4" x 1/2" Tee
1/4" x 1" Nipple
1/2" x 2" Nipple
1/2" x 1-1/2" Nipple
1/4" x 2-1/2" Nipple
1/2" x 1/2" x 3/4" Tee
1/2" x 1/4" x 1/2" Tee
1 CH
1 CH
CH
CH 1
2
CH
CH 1
1
2 CH
CH
CH
CH
3
2
1
CH
CH
CH
1
2
2
18
17
300 psi/ 2000 kPa
Water Pressure Gauge
DESCRIPTION NO.
1
92-343-1-005
P/N QTY.
2 . .
. . . . . .
External By-Pass Tube
1-1/4" Angle Valve
DESCRIPTION NO.
8
7 46-048-1-007
92-304-1-017
QTY. P/N
1 . .
1
. . . . . . . . .
. . . . . . . . . . . . .
1/4" 90 Elbow
1/4" Plug CH
CH 1
2
19
25
32
22
31
12
16
25
6
14
15
13
30
22
31
7
27
5
21
26
4
10 25
19
11
8
10
3
26
11
24
2
20
29
23
23
28
20
18
2
17
9
1
17
1
PRESSURE
BRACKET
SUPPORT
TO DRAIN
1-1/4 INCH NPT
CONNECTION
FUNNEL
SYSTEMS)
RESTRICTION
SEE FIGURE 3
ASSEMBLY,
1-1/4 INCH NPT
SUPPORT
BAR TO DRAIN
CONNECTION
DRIP
MAIN
DRAIN VALVE
(NORMALLY
CLOSED)
CONNECTION FOR
PRESSURE ALARM
FOR WATERFLOW
MODEL RC-1
CHAMBER
SEPARATELY
(FOR VARIABLE
ORDERED
RETARD
1/2 INCH NPT
CONNECTION
FOR WATERFLOW
PRESSURE ALARM
SWITCH
BY-PASS
ALARM
ALARM
TEST VALVE
CLOSED)
(NORMALLY
CONNECTION FOR
WATER MOTOR
3/4 INCH NPT
ALARM
1/2 INCH NPT
CONNECTION
SWITCH
TUBE
EXTERNAL
WATER MOTOR
3/4 INCH NPT
SHOWN
MODEL AV-1
ALARM VALVE,
GROOVE x GROOVE
2-1/2 INCH (DN65)
PRESSURE
GAUGE
SYSTEM
TEST TUBE
ALARM
PRESSURE
GAUGE
SUPPLY
ELECTRICALLY
N.O. ALARM
VALVE
CONTROL
SUPERVISED
ELECTRICALLY
SUPERVISED
N.O. ALARM
VALVE
CONTROL
FOR OPTIONAL
LOCATION
FOR OPTIONAL
LOCATION
All Fittings and Nipples are galvanized
(Standard Order).
NOTES:
CH: Common Hardware.
1.
2.
TFP910
Page 10 of 22
FIGURE 5 PART 2 OF 3
VERTICAL OPEN DRAIN TRIM SPECIAL ORDER SEMI-PREASSEMBLED
FOR 4 & 6 INCH (DN100 & DN150) MODEL AV-1-300 ALARM CHECK VALVES (52-204-2-954)
CH 2 . . 29 Select Nipple per Table
92-210-2-005 1 . . . . 6 Restriction Assembly
17 1/2" x 1/2" x 3/4" Tee CH . . . . 1
46-048-1-009
92-211-1-003
92-211-1-005
92-343-1-007
1/4" Plug
2" Angle Valve
Drip Funnel Bracket
Drip Funnel
Drip Funnel Connector
10
11
7
9
8
. . . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . 1
2 CH
1 . .
. . . . 1
1
1/2" x 1-1/2" Nipple
. . . . . . . . . . . . . .
1/4" x 4" Nipple
1/2" x Close Nipple
1/4" x Close Nipple
22
18
20
19
21
1/2" Tee
3 . . . . .
. . . . . 4
. . . . . . . .
. . . . . 1
1
2
CH
CH
CH
CH
CH
Select Nipple per Table
. . . . . . . . . . 2" x 3" Nipple 31
30
1
2 . .
CH
CH
92-343-1-005
46-005-1-002
52-353-1-005
46-047-1-004
46-049-1-004
DESCRIPTION
1/2" Swing Check Valve
1/2" Y-Strainer
1/2" Globe Valve
Water Pressure Gauge
1/4" Gauge Test Valve
300 psi/ 2000 kPa
3
4
5
1
2
NO.
. . . . . . .
. . . . . . . . .
1 .
1
1
. . 2
. . 2
QTY. P/N
1/2" x 1/4" Reducing
. . . . . . . . . . . . . .
. . . . . . . . . . . .
1/2" x 1/4" x 1/2" Tee
1/2" 90 Elbow
1/2" 45 Elbow
13
12
15
16
14
Bushing
1/2" Union
3 . . . . . . . . .
. . . . . . . . .
. . . . 1
1
1
2
CH
CH
CH
CH
CH
. . . . .
. . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . .
1/2" x 6-1/2" Nipple
1/2" x 3-1/2" Nipple
1/2" x 5" Nipple
1/2" x 2" Nipple
1/2" x 3" Nipple
1/2" x 5-1/2" Nipple
26
28
27
24
25
23
DESCRIPTION NO.
CH 1
1
1
CH
CH
1
1
2
CH
CH
CH
QTY. P/N
TEST VALVE
(NORMALLY
(NORMALLY
DRAIN VALVE
SEPARATELY
ASSEMBLY,
RESTRICTION
SEE FIGURE 3
CONNECTION
1-1/4 INCH NPT
PRESSURE
SYSTEMS)
(FOR VARIABLE
2 INCH NPT
TO DRAIN CONNECTION
TO DRAIN
DRIP
FUNNEL
CLOSED)
MAIN
CONNECTION FOR
MODEL RC-1
CHAMBER
ORDERED
RETARD
CONNECTION
PRESSURE ALARM
FOR WATERFLOW
1/2 INCH NPT
SWITCH
ALARM 1/2" x 1-1/2" 1/2 INCH NPT
(6 INCH VALVE)
(4 INCH VALVE)
WATER MOTOR
CONNECTION FOR
ALARM
3/4 INCH NPT
SWITCH
CONNECTION
PRESSURE ALARM
FOR WATERFLOW
or
1/2" x 2-1/2"
CLOSED)
3/4 INCH NPT
WATER MOTOR
ALARM
FLANGE x FLANGE
MODEL AV-1
ALARM VALVE,
6 INCH (DN150)
SHOWN
1/2" x 4-1/2"
(4 INCH VALVE)
1/2" x 3-1/2"
(6 INCH VALVE)
or
GAUGE
PRESSURE
SUPPLY
PRESSURE
GAUGE
SYSTEM
30
22
22
23
8
9
10
18
6
22
21
21
15
14
7
31
13
26
14
3 22
18 17
28
5
21
27
29
25
13
14
23
16
19
11
11
4
24
2
1
20
12
2
1
H
B
K
C
A
G
I
J
D
F
E
LOCATION
N.O. ALARM
ELECTRICALLY
SUPERVISED
CONTROL
FOR OPTIONAL
VALVE
LOCATION
N.O. ALARM
VALVE
CONTROL
SUPERVISED
ELECTRICALLY
FOR OPTIONAL
3. CH: Common Hardware.
All Fittings and Nipples are galvanized
Install subassemblies in alphabetical order.
(Standard Order).
1.
2.
NOTES:
per AV-1 Alarm Check Valve Size
Select Appropriate Nipple Sizes
4 Inch (DN100)
29 1/2" x 1-1/2"
30 1/2" x 3-1/2"
Nipple
Number
1/2" x 2-1/2"
1/2" x 4-1/2"
6 Inch (DN150)
TFP910
Page 11 of 22
FIGURE 5 PART 3 OF 3
VERTICAL OPEN DRAIN TRIM SPECIAL ORDER SEMI-PREASSEMBLED
FOR 8 INCH (DN200) MODEL AV-1-300 ALARM CHECK VALVES (52-204-2-955)
. . . . 2 CH
28 3/4" x 1-1/2" Nipple. . . . . 1 CH
17
92-210-2-005 1 Restriction Assembly 6 . . . .
3/4" x 1/4" x 3/4" Tee
92-211-1-005
92-211-1-003
92-343-1-007
46-048-1-009
Drip Funnel Connector
Drip Funnel
Drip Funnel Bracket
2" Angle Valve
10
8
9
7
. . . . . . . . . . .
. . . .
. . . . . . . . .
1
. . 1
1
1
1/4" x 1-1/2" Nipple
1/2" x Close Nipple
3/4" x 3/4" x 1/2" Tee
21
19
20
18
. . . . . 3
. . . . .
. . . .
2
1
CH
CH
CH
. . . . . . . .
. . . . .
. . . . .
. . . . . . . . . . 2" x 3" Nipple
3/4" x 4-1/2" Nipple
3/4" x 3" Nipple
3/4" x 2-1/2" Nipple
32
30
31
29
1 CH
CH
CH
CH
1
1
1
92-343-1-005
46-049-1-005
46-005-1-002
52-353-1-005
46-047-1-004
DESCRIPTION
Water Pressure Gauge
300 psi/ 2000 kPa
3/4" Swing Check Valve
1/4" Gauge Test Valve
1/2" Y-Strainer
1/2" Globe Valve
3
5
4
2
1
NO.
. . . . . . . . .
. . . . . . .
1 .
1
1
2 . .
. . 2
QTY. P/N
1/2" 90 Elbow
1/2" 45 Elbow
. . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . .
14
16
15
12
13
11
1/2" Tee
3/4" Union
1/2" Union
1/4" Plug
1 . . . . . . . . .
. . . . . . . . .
2
1
1
1
2
CH
CH
CH
CH
CH
CH
. . . . .
. . . . .
. . . . .
. . . . .
. . . . . . . .
1/2" x 6-1/2" Nipple
3/4" x Close Nipple
1/2" x 3-1/2" Nipple
1/2" x 4-1/2" Nipple
1/2" x 2" Nipple
25
27
26
23
24
DESCRIPTION NO.
2 CH
CH
CH 2
1
CH
CH
2
1
P/N QTY.
CH 1/2" x 1/2" x 3/4" Tee. . . . 1
1/2" x 1-1/2" Nipple. . . . . 1 CH 22
G
E
H
A
F
D
C
B
LOCATION
ELECTRICALLY
FOR OPTIONAL
VALVE
N.O. ALARM
CONTROL
SUPERVISED
LOCATION
FOR OPTIONAL
SUPERVISED
ELECTRICALLY
N.O. ALARM
VALVE
CONTROL
SEPARATELY
TO DRAIN
1-1/4 INCH NPT
CONNECTION
(FOR VARIABLE
PRESSURE
SYSTEMS)
ASSEMBLY,
RESTRICTION
SEE FIGURE 3
CONNECTION
TO DRAIN
MAIN
(NORMALLY
DRAIN VALVE
CLOSED)
FUNNEL
DRIP
2 INCH NPT
CONNECTION FOR
WATER MOTOR
ALARM
3/4 INCH NPT
MODEL RC-1
CHAMBER
RETARD
ORDERED
SWITCH
CONNECTION
1/2 INCH NPT
PRESSURE ALARM
FOR WATERFLOW
ALARM
1/2 INCH NPT
CONNECTION FOR
WATER MOTOR
ALARM
PRESSURE ALARM
FOR WATERFLOW
CONNECTION
3/4 INCH NPT
SWITCH
TEST VALVE
(NORMALLY
CLOSED)
SHOWN
8 INCH (DN200)
FLANGE x GROOVE
ALARM VALVE,
MODEL AV-1
PRESSURE
SYSTEM
GAUGE
SUPPLY
PRESSURE
GAUGE
8
9
10
7
15
21
16
6
22
21
32
21
17
26
5
16
24
25
12 4
24
25
14
23
20
28
19
18
27
29
30
13
3
31
27
18
20
1
11
2
1
2
11
All Fittings and Nipples are galvanized
Install subassemblies in alphabetical order.
NOTES:
3.
1.
2.
(Standard Order).
CH: Common Hardware.
TFP910
Page 12 of 22
FIGURE 6 PART 1 OF 2
HORIZONTAL CLOSED DRAIN TRIM SPECIAL ORDER
FOR 4 & 6 INCH (DN100 & DN150) MODEL AV-1-300 ALARM CHECK VALVES (52-204-2-057)
6 INCH (DN150)
FLANGE x FLANGE
CONNECTION
2 INCH NPT
TO DRAIN
SWITCH
CONNECTION
FOR WATERFLOW
PRESSURE
ALARM
1/2 INCH NPT
PRESSURE
SEPARATELY
ORDERED
(FOR VARIABLE
3/4 INCH NPT
MOTOR
FOR WATER
CONNECTION
ALARM
CONNECTION
SEE FIGURE 3
RESTRICTION
ASSEMBLY,
1/2 INCH NPT
CONNECTION
FOR WATERFLOW
PRESSURE
3/4 INCH NPT
ALARM SWITCH
FOR WATER
ALARM
MOTOR
VALVE)
1/2" x 2-1/2"
(6 INCH
(4 INCH
SYSTEM
PRESSURE
GAUGE
TEST VALVE
(NORMALLY
ALARM
or
CLOSED)
ALARM VALVE,
MODEL AV-1
(NORMALLY
DRAIN VALVE
CLOSED)
MAIN
SHOWN
COVER MUST
30 INCHES
BE AT LEAST
AWAY FROM
A WALL
PRESSURE
HANDHOLE
GAUGE
SUPPLY
(4 INCH
1/2" x 4-1/2"
VALVE)
(6 INCH
or
1/2" x 3-1/2"
VALVE) VALVE)
1/2" x 1-1/2"
VALVE)
1/2" x 8"
(6 INCH
1/2" x 7"
VALVE)
(4 INCH
or
MODEL RC-1
RETARD
CHAMBER
SYSTEMS)
9
17
17
6
17
18
26
9
18
3
5
17
10
19
25
13
17
17
10
9
22
17
3
10
21
17
14
26
7
11
19
8
2
8
16
15
2
1
10
12
1
20
18
10
4
24
23
FOR OPTIONAL
ELECTRICALLY
CONTROL
VALVE
LOCATION
N.O. ALARM
SUPERVISED
SUPERVISED
N.O. ALARM
LOCATION
VALVE
CONTROL
ELECTRICALLY
FOR OPTIONAL
All Fittings and Nipples are galvanized
(Standard Order).
CH: Common Hardware.
NOTES:
1.
2.
92-210-2-005
CH
46-047-1-009
CH
CH
CH
46-005-1-002
52-353-1-005
92-343-1-005
46-049-1-004
46-047-1-004
P/N
CH
CH
CH
CH
CH
CH
CH
CH
CH
19
. . . . . . . . 1/2" x 2" Nipple 3
1/2" x 3-1/2" Nipple
1/2" x 3" Nipple
20
. . . . . . . .
. . . . . 1
2
Restriction Assembly
2" x 2" x 1/2" Tee
1/4" Plug
2" Globe Valve
1/4" x Close Nipple
1/4" x 4" Nipple
1/2" x 1/2" x 3/4" Tee
1/2" x 1/4" x 1/2" Tee
1/4" Gauge Test Valve
1/2" Y-Strainer
DESCRIPTION
300 psi/ 2000 kPa
Water Pressure Gauge
1/2" Swing Check Valve
1/2" Globe Valve
1/2" Tee
1/2" 90 Elbow
1/2" Union
1/2" x 1-1/2" Nipple
5
12
16
17
13
14
15
18
10
11
8
9
7
6
NO.
3
4
2
1
. . . . . . . . . 1
. . . . . . .
. . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . .
1 . . . .
. . . . .
. . . . .
. . . .
1
8
1
1
1
1
. . . .
2
3
5
1
1
. . . . . . .
QTY.
. .
.
. .
2
2
1
2
2 . . CH 25 Select Nipple per Table
2" x 2-1/2" Nipple 26 2 . . . . . . . CH
1 21 1/2" x 5" Nipple . . . . . . . .
2 . . 23 Select Nipple per Table
Select Nipple per Table 24 2 . .
1/2" x 5-1/2" Nipple 22 1 . . . . .
CH
CH
CH
CH
DESCRIPTION NO. QTY. P/N
Select Appropriate Nipple Sizes
per AV-1 Alarm Check Valve Size
1/2" x 8"
1/2" x 2-1/2"
6 Inch (DN150)
1/2" x 4-1/2"
23
25
24
Number
Nipple
1/2" x 1-1/2"
1/2" x 7"
1/2" x 3-1/2"
4 Inch (DN100)
TFP910
Page 13 of 22
FIGURE 6 PART 2 OF 2
HORIZONTAL CLOSED DRAIN TRIM SPECIAL ORDER
FOR 8 INCH (DN200) MODEL AV-1-300 ALARM CHECK VALVES (52-204-2-058)
15
18
30
17
20
10
19
12
19
19
7
14
6
19
12
21
24
13
23
19
3
31
8
12
10
22
20
5
22
11
27
15
25
18
9
23 28
4
25
2
26
16
29
9
1
1
2
ALARM VALVE,
TO DRAIN
2 INCH NPT
CONNECTION
8 INCH (DN200)
ALARM SWITCH
PRESSURE
FOR WATERFLOW
CONNECTION
1/2 INCH NPT
ASSEMBLY,
RESTRICTION
SEE FIGURE 3
ALARM
FOR WATER
3/4 INCH NPT
CONNECTION
CONNECTION
FOR WATER
3/4 INCH NPT
1/2 INCH NPT
PRESSURE
FOR WATERFLOW
CONNECTION
SWITCH
ALARM
MOTOR
MOTOR
ALARM
CLOSED)
DRAIN VALVE
(NORMALLY
MAIN
CLOSED)
ALARM
(NORMALLY
TEST VALVE
RETARD
CHAMBER
SYSTEMS)
MODEL RC-1
(FOR VARIABLE
ORDERED
SEPARATELY
PRESSURE
GAUGE
PRESSURE
SYSTEM
PRESSURE
MODEL AV-1
SHOWN
GROOVE
FLANGE x
AWAY FROM
A WALL
HANDHOLE
BE AT LEAST
30 INCHES
COVER MUST
GAUGE
SUPPLY
SUPERVISED
N.O. ALARM
LOCATION
CONTROL
ELECTRICALLY
FOR OPTIONAL
VALVE
FOR OPTIONAL
ELECTRICALLY
CONTROL
LOCATION
N.O. ALARM
SUPERVISED
VALVE
CH
CH
CH
CH
CH
CH
P/N
46-049-1-005
46-005-1-002
92-343-1-005
46-049-1-004
46-047-1-004
CH
CH
CH
CH
CH
92-210-2-005
CH
52-353-1-005
46-047-1-009
1/2" x 2" Nipple 20 . . . . . . . . 2
1/2" x 1/2" x 3/4" Tee
3/4" Union
1/2" 90 Elbow
1/2" Tee
3/4" Swing Check Valve
1/4" Gauge Test Valve
DESCRIPTION
300 psi/ 2000 kPa
Water Pressure Gauge
1/2" Swing Check Valve
1/2" Globe Valve
3/4" x 3/4" x 1/2" Tee
3/4" x 1/4" x 3/4" Tee
1/4" Plug
1/2" Union
Restriction Assembly
1/2" x 1-1/2" Nipple
1/4" x 1-1/2" Nipple
1/2" Y-Strainer
2" x 2" x 1/2" Tee
2" Globe Valve
5
12
13
15
16
14
18
19
17
11
10
9
7
8
6
NO.
3
4
2
1
1 . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . .
. . . . . . . . .
. . . . . . . . .
3
. . . .
. . . . .
. . . . .
. . . .
. . . .
1
2
5
1
1
2
1
. . . .
2
2
1
1
1
1
QTY.
. .
.
.
. .
2
1
1
2
QTY.
2" x 2-1/2" Nipple
2" x 3" Nipple
3/4" x Close Nipple
1/2" x 4-1/2" Nipple
1/2" x 9-1/2" Nipple
3/4" x 1-1/2" Nipple
1/2" x 3-1/2" Nipple
1/2" x 3" Nipple
3/4" x 4-1/2" Nipple
3/4" x 3" Nipple
3/4" x 2-1/2" Nipple 27
30
31
29
28
23
24
26
25
21
22
. . . . . . . . . .
1 . . . . .
. . . . .
. . . . . . .
. . . . . . . .
1
1
1
1
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . . . . .
2
2
1
1
1
2
DESCRIPTION NO.
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
P/N
All Fittings and Nipples are galvanized
CH: Common Hardware.
(Standard Order).
NOTES:
2.
1.
TFP910
Page 14 of 22
FIGURE 7 PART 1 OF 3
INSTALLATION DIMENSIONS
FOR 2-1/2 INCH (DN65) MODEL AV-1-300 ALARM CHECK VALVES
13-1/2 (343) 15-1/2 (394)
10-1/2 (267) 10-1/2 (267)
10 (254) 10-1/2 (267)
12-1/4 (311) 12-1/4 (311)
3 (75) 3 (75)
16-1/2 (419) N/A
8-7/8 (225) 8-7/8 (225)
G
F
E
D
G x G &
F x G
C
A B
F x G
G x G &
B A
D
E
C
F
G
With RC-1
D
E
F
G
B
C
Dimension
A
Without RC-1
Dimensions in Inches and (mm)
16-1/2 (419)
8-7/8 (225)
10-1/2 (267)
12-1/4 (311)
16-1/2 (419)
10-1/2 (267)
3 (75)
N/A
3 (75)
13-1/2 (343)
10 (254)
12-1/4 (311)
8-7/8 (225)
10-1/2 (267)
RC-1
RC-1
Dimensions in Inches and (mm)
With RC-1
G
C
E
D
F
A
B
Dimension
Without RC-1
ELEVATION VIEW
PLAN VIEW
ELEVATION VIEW
PLAN VIEW
Vertical Closed Drain Trim
Vertical Open Drain Trim
TFP910
Page 15 of 22
FIGURE 7 PART 2 OF 3
INSTALLATION DIMENSIONS
FOR 4 & 6 INCH (DN100 & DN150) MODEL AV-1-300 ALARM CHECK VALVES
PLAN VIEW
ELEVATION VIEW
PLAN VIEW
ELEVATION VIEW
ELEVATION VIEW PLAN VIEW
Horizontal Closed Drain Trim
Vertical Closed Drain Trim
Vertical Open Drain Trim
G
F
A B
D
E
C
G
F
A B
D
E
C
E
D
C A
B
RC-1
RC-1
4 Inch (DN100)
10 (254)
15 (381)
3-1/4 (83)
10 (254)
14 (356)
13-3/4 (349)
10-1/4 (260)
Dimension
D
E
A (G x G)
A (F x F)
A (F x G)
C
B
Without RC-1
6 Inch (DN150)
14-3/4 (375)
11-1/2 (292)
12-1/4 (311)
6 Inch (DN150)
12 (305)
12 (305)
12-1/4 (311)
15 (381)
15 (381)
3-1/4 (83)
14-3/4 (375)
14 (356)
13-3/4 (349)
4 Inch (DN100)
10 (254)
10 (254)
10-1/4 (260)
10-1/2 (267)
3-1/4 (83)
With RC-1
15 (381)
12 (305)
3-1/4 (83)
12 (305)
Dimensions in Inches and (mm)
4 Inch (DN100)
Dimension
6 Inch (DN150)
Without RC-1 With RC-1
6 Inch (DN150) 4 Inch (DN100)
Dimensions in Inches and (mm)
15-1/2 (394)
12-1/2 (318)
10-1/4 (260)
10-1/2 (267)
10-1/2 (267)
10 (254)
10 (254)
19 (483)
D (F x G)
F
G
E
D (F x F)
D (G x G)
C
A
B
11-1/2 (292)
11-1/4 (286)
11-1/2 (292)
12-1/4 (311)
2-3/4 (70)
15-1/2 (394)
12 (305)
12 (305)
12-1/4 (311)
11-1/2 (292)
11-1/4 (286)
19 (483)
15 (381)
3 (75)
10 (254)
3 (75)
11-1/2 (292)
12-1/2 (318)
19 (483)
10 (254)
10-1/2 (267)
10-1/2 (267)
10-1/4 (260)
12 (305)
2-3/4 (70)
15 (381)
12 (305)
19 (483)
4 Inch (DN100)
19 (483)
10-1/2 (267)
10-1/2 (267)
10-1/4 (260)
10 (254)
10 (254)
12-1/2 (318)
15-1/2 (394)
E
G
F
Dimension
D (G x G)
D (F x F)
D (F x G)
C
A
B
Dimensions in Inches and (mm)
Without RC-1
6 Inch (DN150)
11-1/4 (286)
11-1/2 (292)
12-1/4 (311)
11-1/2 (292)
6 Inch (DN150)
19 (483)
11-1/4 (286)
11-1/2 (292)
12-1/4 (311)
12 (305)
12 (305)
15 (381)
15-1/2 (394)
2-3/4 (70) 3 (75)
With RC-1
12-1/2 (318)
11-1/2 (292)
3 (75)
4 Inch (DN100)
19 (483)
10-1/2 (267)
10-1/2 (267)
10-1/4 (260)
10 (254)
10 (254)
15 (381)
2-3/4 (70)
12 (305)
12 (305)
19 (483)
RC-1
TFP910
Page 16 of 22
FIGURE 7 PART 3 OF 3
INSTALLATION DIMENSIONS
FOR 8 INCH (DN200) MODEL AV-1-300 ALARM CHECK VALVES
14 (356) 14 (356)
N/A 15-1/2 (394)
2-1/2 (64) 2-1/2 (64)
16-1/2 (419) 16-1/2 (419)
12 (305) 12 (305)
16-1/8 (410) 16-1/8 (410)
18-1/2 (470) 15-3/4 (400)
14 (356)
12 (305)
N/A
19-1/2 (495)
16-1/2 (419) 16-1/2 (419)
15 (381)
1-1/2 (38)
19-1/2 (495)
14 (356)
C
B A
E
G
F
G
F
C
A B
B
C
D
E
G x G
F x F
F x G &
E
3-1/2 (89)
15-1/2 (394)
16-1/2 (419)
16-1/8 (410)
18-1/2 (470)
3-1/2 (89)
N/A
16-1/2 (419)
16-1/8 (410)
15-3/4 (400)
14 (356)
12 (305)
14 (356)
12 (305)
D
F x G &
G x G
F x F
D
A
F x F
G x G
F x G &
B
E
G
F
C
D
With RC-1
Dimensions in Inches and (mm)
Dimensions in Inches and (mm)
With RC-1
Dimension
A
G
C
F
D
E
B
A
Dimension
Without RC-1
Without RC-1
Dimensions in Inches and (mm)
Without RC-1
B
E
C
D
Dimension
A
With RC-1
RC-1
RC-1
RC-1
ELEVATION VIEW
PLAN VIEW
ELEVATION VIEW
ELEVATION VIEW PLAN VIEW
PLAN VIEW
Vertical Closed Drain Trim
Vertical Open Drain Trim
Horizontal Closed Drain Trim
TFP910
Page 17 of 22
TINT)
(GREEN
2
RETARD
CHAMBER
MODEL RC-1
PRESSURE
SWITCH
3
(ROUTE TO
DRAIN)
1
1
2
3
. . . . . . . . . .
. . . . . . . . .
. . . . . . . . . .
3/32" Vent
3/4" x 1/4" Hex
Fitting
Bushing
92-032-1-002
CH
DESCRIPTION NO. P/N
1/4" x 5'-0"
Tubing CH
1
1
QTY.
1
Trim kit is ordered separately when a
Water Motor Alarm (P/N 52-201-2-012)
is not installed.
FIGURE 8
ALARM VENT TRIM KIT
Setting
Procedure
Steps 1 through 11 are to be per-
formed when initially setting the Mod-
el AV-1-300 Alarm Check Valve or af-
ter system operation due to a re.
NOTICE
Filling the system with water will result
in operation of the associated alarms.
Consequently, notication must rst
be given to the owner and re depart-
ment, central station, or other sig-
nal station to which the alarms are
connected.
Notify the proper authorities and all
personnel who may be affected that
an alarm test is to be performed.
After placing a re protection system
in service, notify the proper authorities
and advise those responsible for mon-
itoring proprietary and/or central sta-
tion alarms.
Step 1. Open the 1/4 inch Gauge Test
Valves for the Supply and System
Pressure Gauges.
Step 2. Check to see that the Hand-
hole Cover bolts are tight. If not, cross-
tighten them.
Step 3. Close the Alarm Test Valve.
Step 4. Open the remote cross main
or branch line vent connection. (Refer
to Step 7 in the Installation section.)
Step 5. Slowly open the main control
valve until the sound of owing water
just begins and then open the valve
one more turn.
Step 6. Close the remote branch line
vent connection after the discharge of
aerated water ceases, and the outlet
has owed full for at least 15 seconds.
Step 7. Fully open the main control
valve.
Step 8. Open the end-of-line Inspec-
tors Test Connection (or Alarm Test
Valve, if acceptable to the authority
having jurisdiction) and verify that the
system alarms operate.
Step 9. Close the end-of-line Inspec-
tors Test Connection (or Alarm Test
Valve).
Step 10. Verify that water ceases to
ow from the alarm line drain. If water
continues to ow, follow the corrective
procedure described in the Care and
Maintenance section.
The Restriction Assembly has a 1/8
inch (3,2 mm) diameter drain orice.
Sufcient time must be allowed for
drainage of the Retard Chamber and
the piping to the water motor alarm.
Step 11. After verication that the ow
of water out of the alarm line drain has
stopped, the alarm valve is set and is
ready for service.
Care and
Maintenance
The following procedures and inspec-
tions should be performed as indi-
cated, in addition to any specic
re quirements of the NFPA. Any impair-
ment must be immediately corrected.
NOTICE
Performing the care and maintenance
procedures will result in operation of
the associated alarms. Consequently,
notication must rst be given to the
owner and re department, central
sta tion, or other signal station to which
the alarms are connected.
Before closing a re protection system
main control valve for maintenance
work on the re protection system that
it controls, obtain permission to shut
down the affected re protection sys-
tem from the proper authorities and
notify all personnel who may be af-
fected by this decision.
Responsibility lies with the owner for
the in spection, testing, and mainte-
nance of their re protection system
and de vices in compliance with this
docu ment, as well as with the appli-
cable standards of the National Fire
Protec tion Association (for example,
NFPA 25), in addition to the standards
of any authority having jurisdiction.
Contact the installing contractor or
product manufac turer regarding any
questions.
Automatic sprinkler systems are rec-
ommended to be inspected, tested,
and maintained by a qualied Inspec-
tion Service in accordance with local
requirements and/or national codes.
The Tyco

Model AV-1-300 Alarm

Check Valves do not require any reg-
ularly scheduled maintenance. It is
recom mended, however, that proper
opera tion of the alarms be periodically
veri ed in accordance with a proce-
dure that is acceptable to the author-
ity hav ing jurisdiction. Any impairment
must be immediately corrected.
Inspection Procedure
It is recommended that the following
inspection procedure be performed at
least quarterly by a qualied Inspec-
tion Service.
Step 1. Notify the proper authorities
and all personnel who may be affected
that an alarm test is to be performed.
Step 2. Open the end-of-line Inspec-
tors Test Connection (or Alarm Test
Valve, if acceptable to the authority
having jurisdiction) and verify that the
system alarms operate in accordance
with the requirements of the authority
having jurisdiction. Verify that the wa-
ter motor alarm and/or the pressure
alarm switch properly actuate and
within the elapsed time required by
the authority having jurisdiction.
Step 3. Verify that water is owing out
of the alarm line drain at a rate consis-
tent with the 1/8 inch (3,2 mm) diame-
ter drain orice in the Restriction As-
sembly.
Step 4. Close the end-of-line Inspec-
tors Test Connection (or Alarm Test
Valve).
Step 5. Verify that water ceases to
ow from the alarm line drain.
Step 6. Clean the 1/2 inch Strainer (lo-
cated in the valve trim) as well as the
3/4 inch Strainer (located at the con-
nection to the water motor alarm, as
applicable). Be sure to replace the
strainer baskets and tighten the caps
securely.
NOTICE
Cleaning of the Strainers after each
operation of the alarms is especially
important in the case of water sup-
plies (such as lakes and rivers) having
a large quantity of suspended mat-
ter. A clogged alarm line can prevent
opera tion of the alarms.
TFP910
Page 18 of 22
Step 7. Notify all authorities responsi-
ble for monitoring the installation that
the re protection system has been re-
turned to service.
Sprinkler System Drain-Down
Draining the sprinkler system must be
done in accordance with the following
procedure:
Step 1. Close the main control valve, if
this has not already been done.
Step 2. Open the remote cross main
or branch line vent connection. (Refer
to Step 7 in the Installation section.)
Step 3. Open the Main Drain Valve.
Check rst to see that the drainage
water discharge will not cause dam-
age or result in dangerous conditions.
Step 4. Wait until the Supply Pressure
Gauge reads zero pressure and the
sound of draining water has stopped
before performing any maintenance
work on the re protection system.
Leakage from Alarm Line
Drain
Follow the steps indicated below un-
til water ceases to ow from the alarm
line drain. Check for the discontinua-
tion of the leakage after each step is
complete.
Step 1. Open the Main Drain Valve.
Let the water ow for about 5 sec-
onds and then close the Main Drain
Valve. This should ush any loose de-
bris that may have become trapped
between the Clapper Facing and the
Seat Ring or in the seating area of the
Drain Valve.
Step 2. Repeat Step 1 if the rate of
continued ow out of the drain was
noticeably reduced.
Step 3. Open the Alarm Test Valve
and allow water to ow for about 5
seconds before re-closing the valve.
This should ush any loose debris that
may have become trapped in the seat-
ing area of the Alarm Test Valve.
Step 4. Repeat Step 3 if the rate of
continued ow out of the drain was
noticeably reduced.
Step 5. Determine whether the water
is owing from the Alarm Port (Figure
1) or past the Alarm Test Valve. If the
leakage is past the Alarm Test Valve,
close the main control valve, and then
repair or replace the Alarm Test Valve
as necessary.
Step 6. If it appears that the leakage
noted in Step 5 is from the Alarm Port,
drain the system in accordance with
the prescribed procedure. After the
system has been drained, remove the
Handhole Cover.
While holding the Spring down by the
coils, remove the Hinge Pin. Remove
the Spring and Waterway Clapper
Assembly.
Step 7. Using a light, check for and
remove any debris that may have be-
come lodged within the Seat Ring
groove. Inspect the Seat Ring seat for
any damage. If the Seat Ring has be-
come dented across the seat then the
Alarm Check Valve will have to be re-
placed. It is impractical to re-face a
Seat Ring in the eld.
Step 8. Check for and remove any de-
bris that may have become lodged in
the Clapper Facing. If a minor imper-
fection remains in the Clapper Fac-
ing, then turn it over after thoroughly
clean ing both surfaces with a clean
cloth. Replace the Clapper Facing if
neces sary. Be sure to securely re-
tighten the retaining fastener for the
Clapper Washer.
Step 9. Replace the Spring and Wa-
terway Clapper Assembly as shown in
Figure 1. While holding the coils of the
Spring down, re-insert the Hinge Pin.
Be sure that the Hinge Pin is pushed
all the way to the rear of the valve.
Step 10. Replace the Handhole Cover.
Return the Alarm Valve to operation in
accordance with the steps described
in the Setting Procedure section.
Clogged Alarm Line Drain
If water either does not ow or only
dribbles out of the alarm line drain
during an alarm test, then it is likely
that the screen protecting the Restric-
tion Assembly drain orice (Ref. Fig-
ure 3) has become clogged.
NOTICE
For variable pressure systems, a
clogged alarm line drain will increase
the likelihood of a false alarm.
First break the union downstream of
the Drain Restriction and remove the
Drain Restriction for cleaning by back-
ushing the screen. Re-install the
Drain Restriction and re-assemble the
drain line.
Loss of Excess System
Pressure
For variable pressure systems, the
System Pressure Gauge normally in-
dicates a pressure greater than that
shown by the Supply Pressure Gauge.
Also, the value should be close to that
of the peak supply pressure that has
occurred after the system was placed
in service.
NOTICE
For variable pressure systems, loss of
excess system pressure will increase
the likelihood of a false alarm.
Follow the procedure indicated be-
low to correct a loss of excess system
pressure condition.
Step 1. Check for signs of continued
leakage from the alarm line drain. If
rust stains and/or water deposits indi-
cate that continued leakage has been
taking place, take corrective action
ac cording to the procedure described
in the sub-section entitled Leakage
from Alarm Line Drain.
Step 2. If there are no signs of contin-
ued leakage from the alarm line drain,
close the main control valve, slowly
remove the plug from the supply pres-
sure gauge test valve to relieve the
supply pressure, and then slowly open
the union in the externally mounted
bypass.
Check for leakage past the Bypass
Check Valve. If there is leakage, de bris
may have become lodged be tween its
clapper and seat. Drain the system in
accordance with the pre scribed pro-
cedure and then clean or replace the
Bypass Check Valve as required.
Re-assemble the externally mount-
ed bypass, replace the plug into the
Gauge Test Valve, and return the re
protection system to operation in ac-
cordance with the steps described in
the Operation section.
Step 3. If there are no signs of leak-
age past either the Alarm Check Valve
Clapper per Step 1 or the Bypass
Check Valve per Step 2, inspect the
sprinkler system for leakage.
Excess Pressure Due To
Thermal Expansion
Wet pipe sprinkler systems subject
to ambient temperatures in excess of
100F/38C can experience signi cant
increases in system pressure due to
the thermal expansion of the water. In
particular, a gridded wet-pipe sys tem
with a relatively small air pocket and
no relief valve can be subjected to an
increase of more than 100 psi (6,9 bar),
due to an increase in ambient temper-
ature of approximately 50F/28C.
As necessary, install a pressure relief
valve, in accordance with the require-
ments of the authority having jurisdic-
tion, to automatically relieve the ex-
cess pressure that could otherwise be
created in wet-pipe systems exposed
to signicant increases in ambient
temperature.
TFP910
Page 19 of 22
False Alarms
Follow the step below when repeated
false alarms occur in a variable pres-
sure system.
Step 1. Check for and correct the
cause of continued leakage out the
alarm line drain.
Step 2. Check for and clean a clogged
alarm line drain.
Step 3. Check for and correct the
cause of a loss in excess system pres-
sure.
Step 4. Drain the sprinkler system and
re-ll it using the steps described in
the Setting Procedure section.
Intermittent Alarms
If the pressure alarm switch gives a
steady signal, but the water motor
generates an intermittent alarm, check
for binding in the water motor alarm
drive shaft.
If the water motor alarm and/or the
pressure alarm switch provide an in-
termittent alarm, it is likely the conse-
quence of an excessive amount of air
being trapped within the sprinkler sys-
tem. Drain down the sprinkler system
and rell it using the steps described
in the Setting Procedure section.
A discontinuance of an alarm may also
be caused by the Clapper closing due
to a sudden drop in supply pressure
or the shut-off of a pump in the supply
line. These types of problems can only
be corrected by maintaining a steady
supply pressure.
Limited
Warranty
Products manufactured by Tyco Fire
Suppression & Building Products
(TFSBP) are warranted solely to the
original Buyer for ten (10) years against
defects in material and work manship
when paid for and properly installed
and maintained under normal use and
service. This warranty will ex pire ten
(10) years from date of ship ment by
TFSBP. No warranty is given for prod-
ucts or components manufac tured by
companies not afliated by ownership
with TFSBP or for products and com-
ponents which have been subject to
misuse, improper installa tion, corro-
sion, or which have not been installed,
maintained, modied or re paired in
accordance with applicable Standards
of the National Fire Protec tion Associ-
ation, and/or the standards of any oth-
er Authorities Having Juris diction. Ma-
terials found by TFSBP to be defective
shall be either repaired or replaced, at
TFSBPs sole option. TFSBP neither
assumes, nor author izes any person
to assume for it, any other obligation
in connection with the sale of prod-
ucts or parts of products. TFSBP shall
not be responsible for sprinkler system
design errors or inac curate or incom-
plete information sup plied by Buyer or
Buyers repre sentatives.
In no event shall TFSBP be liable, in
contract, tort, strict liability or under
any other legal theory, for inciden-
tal, indirect, special or consequential
dam ages, including but not limited to
labor charges, regardless of whether
TFSBP was informed about the possi-
bility of such damages, and in no
event shall TFSBPs liability exceed an
amount equal to the sales price.
The foregoing warranty is made in lieu
of any and all other warranties, ex-
press or implied, including warranties
of merchantability and tness for a
par ticular purpose.
This limited warranty sets forth the ex-
clusive remedy for claims based on
failure of or defect in products, materi-
als or components, whether the claim
is made in contract, tort, strict liability
or any other legal theory.
This warranty will apply to the full ex-
tent permitted by law. The invalidity,
in whole or part, of any portion of this
warranty will not affect the remainder.
TFP910
Page 20 of 22
Ordering
Procedure
Contact your local distributor for avail-
ability. When placing an order, indicate
the full product name. Refer to Table
A (Page 3) for Flange Drilling Speci-
cations. The Price Book provides
part numbers for factory pre-trimmed
Model AV-1-300 Valves.
Standard AV-1-300
Alarm Check Valve
(Assumes American Standard Flange
Drilling, American Threaded Ports,
and American Groove Outside Diam-
eter, as applicable)
Specify: (size in inches) Model AV-1-
300 Alarm Check Valve with (end con-
nections), P/N (specify).
2-1/2 Inch Valves
2.88 inch (73,0 mm) Groove O.D. x
2.88 inch (73,0 mm) Groove O.D.
2-1/2 Inch G x G . . . . . . . P/N 52-203-1-110
ANSI Flange x
2.88 inch (73,0 mm) Groove O.D.
2-1/2 Inch F x G . . . . . . .P/N 52-203-1-210
4 Inch Valves
4.50 inch (114,3 mm) Groove O.D. x
4.50 inch (114,3 mm) Groove O.D.
4 Inch G x G . . . . . . . . . . P/N 52-203-1-113
ANSI Flange x
4.50 inch (114,3 mm) Groove O.D.
4 Inch F x G . . . . . . . . . . .P/N 52-203-1-413
ANSI Flange x ANSI Flange
4 Inch F x F . . . . . . . . . . .P/N 52-203-1-013
6 Inch Valves
6.62 inch (168,3 mm) Groove O.D. x
6.62 inch (168,3 mm) Groove O.D.
6 Inch G x G . . . . . . . . . . P/N 52-203-1-115
ANSI Flange x
6.62 inch (168,3 mm) Groove O.D.
6 Inch F x G . . . . . . . . . . .P/N 52-203-1-615
ANSI Flange x ANSI Flange
6 Inch F x F . . . . . . . . . . .P/N 52-203-1-015
8 Inch Valves
8.62 inch (219,1 mm) Groove O.D x
8.62 inch (219,1 mm) Groove O.D.
8 Inch G x G . . . . . . . . . .P/N 52-203-1-916
ANSI Flange x
8.62 inch (219,1 mm) Groove O.D.
8 Inch F x G . . . . . . . . . . .P/N 52-203-1-816
ANSI Flange x ANSI Flange
8 inch F x F . . . . . . . . . . .P/N 52-203-1-016
AV-1-300 Valve Trim
Standard Order
Specify: Vertical, Closed Drain Galva-
nized Trim for (size) Model AV 1-300
Alarm Check Valve, P/N (specify).
Vertical Closed Drain, Galvanized
(See Figure 3.)
2-1/2 inch . . . . . . . . . . . P/N 52-204-2-050
4 or 6 inch* . . . . . . . . . . P/N 52-204-2-951
8 inch* . . . . . . . . . . . . . . P/N 52-204-2-952
*Provided semi-preassembled
Special Order
Specify: (Vertical or Horizontal),
(Closed or Open) Drain Galvanized
Trim for (size) Model AV-1-300 Alarm
Check Valve, P/N (specify).
Vertical Open Drain, Galvanized
(See Figure 4.)
2-1/2 inch . . . . . . . . . . . P/N 52-204-2-053
4 or 6inch* . . . . . . . . . . . P/N 52-204-2-954
8 inch* . . . . . . . . . . . . . . P/N 52-204-2-955
*Provided semi-preassembled
Horizontal Closed Drain, Galvanized
(See Figure 5.)
4 or 6 inch . . . . . . . . . . . P/N 52-204-2-057
8 inch . . . . . . . . . . . . . . . P/N 52-204-2-058
Accessories
Order the following accessories, as
applicable.
Model RC-1
Retard Chamber . . . . . . P/N 52-211-1-002
Required for variable pressure water sup-
ply conditions
Alarm Vent Trim . . . . . . . P/N 52-201-2-012
Required when a water motor alarm is not
installed
Model PS10-2A Potter
Electric Waterow Pressure
Alarm Switch . . . . . . . . . P/N 54-281-1-002
Required for electric signal indicating
waterow
Model WMA-1 Water
Motor Alarm . . . . . . . . . P/N 52-630-1-001
Required for a mechanical waterow alarm
Optional 600 PSI Water
Pressure Gauge . . . . . . P/N 92-343-1-004
Replacement Parts
Valve
Specify: (description) for use with (size)
Model AV-1-300 Alarm Check Valve,
P/N (see Figure 1).
Trim
Specify: (description) for use with Model
AV-1-300 Alarm Check Valve,
P/N (see Figure 3, 4, or 5).
Other Model AV-1-300
Congurations
Other AV-1-300 Alarm Check Valves
are valves ordered with any combina-
tion of ange, threaded port, or groove
outside diameter not offered under
Standard AV-1-300 Alarm Check
Valve offerings.
Valves with NPT threaded ports are in-
tended for use with the AV-1-300 Valve
Trim described in this data sheet.
Valves with ISO threaded ports are in-
tended for use with special order trim
that is provided by local distributors
to meet the specic needs of certain
localities. Contact your local distribu-
tor regarding valves and valve trim for
specic localities.
Specify: (size) Model AV-1-300 Alarm
Check Valve with (connections) with
(NPT or ISO) threaded ports, P/N (see
below).
2-1/2 Inch Valves with NPT Ports
ISO (PN16) Flange x
2.88 inch (73,0 mm)
Groove O.D . . . . . . . . . . .P/N 52-203-1-251
ANSI Flange x
3.00 inch (76,1 mm)
Groove O.D . . . . . . . . . . P/N 52-203-1-220
ISO (PN16) Flange x
3.00 inch (76,1 mm)
Groove O.D . . . . . . . . . . P/N 52-203-1-331
AS Flange x
2.88 inch (73,0 mm)
Groove O.D . . . . . . . . . . .P/N 52-203-1-611
AS Flange x
3.00 inch (76,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-410
JIS Flange x
2.88 inch (73,0 mm)
Groove O.D. . . . . . . . . . .P/N 52-203-1-710
JIS Flange x
3.00 inch (76,1 mm)
Groove O.D. . . . . . . . . . .P/N 52-203-1-810
3.00 inch (76,1 mm) Groove O.D x
3.00 inch (76,1 mm)
Groove O.D. . . . . . . . . . .P/N 52-203-1-120
2-1/2 Inch Valves with ISO Ports
ISO (PN16) Flange x
2.88 inch (73,0 mm)
Groove O.D. . . . . . . . . . . P/N 52-203-1-211
ISO (PN16) Flange x
3.00 inch (76,1 mm)
Groove O.D. . . . . . . . . . .P/N 52-203-1-311
3.00 inch (76,1 mm) Groove O.D x
3.00 inch (76,1 mm)
Groove O.D . . . . . . . . . . P/N 52-203-4-120
2.88 inch (73,0 mm) Groove O.D x
2.88 inch (73,0 mm)
Groove O.D. . . . . . . . . . P/N 52-203-1-921
TFP910
Page 21 of 22
4 Inch Valves with NPT Ports
ISO (PN16) Flange x
4.50 inch (114,3 mm)
Groove O.D . . . . . . . . . . P/N 52-203-1-493
ISO (PN16) Flange x
ISO (PN16) Flange. . . . . P/N 52-203-4-013
AS Flange x
AS Flange . . . . . . . . . . . P/N 52-203-4-313
AS Flange x
4.50 inch (114,3 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-413
JIS Flange x
JIS Flange . . . . . . . . . . . P/N 52-203-4-713
JIS Flange x
4.50 inch (114,3 mm)
Groove O.D . . . . . . . . . . P/N 52-203-4-813
4 Inch Valves with ISO Ports
ISO (PN16) Flange x
ISO Flange . . . . . . . . . . .P/N 52-203-4-113
ISO (PN16) Flange x
4.50 inch (114,3 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-213
4.50 inch (114,3 mm) Groove O.D x
4.50 inch (114,3 mm)
Groove O.D . . . . . . . . . . P/N 52-203-1-923
6 Inch Valves with NPT Ports
ANSI Flange x
6.50 inch (165,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-1-625
ISO (PN16) Flange x
6.62 inch (168,3 mm)
Groove O.D. . . . . . . . . . P/N 52-203-1-695
ISO (PN16) Flange x
6.50 inch (165,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-5-215
ISO (PN16) Flange x
ISO (PN16) Flange. . . . . P/N 52-203-4-015
AS Flange x
AS Flange . . . . . . . . . . . P/N 52-203-4-315
AS Flange x
6.62 inch (168,3 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-415
AS Flange x
6.50 inch (165,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-425
JIS Flange x
JIS Flange . . . . . . . . . . . P/N 52-203-4-715
JIS Flange x
6.62 inch (168,3 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-815
JIS Flange x
6.50 inch (165,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-5-815
6.50 inch (165,1 mm) Groove O.D x
6.50 inch (165,1 mm)
Groove O.D . . . . . . . . . . . P/N 52-203-1-124
6 Inch Valves with ISO Ports
ISO (PN16) Flange x
ISO (PN16) Flange. . . . . P/N 52-203-4-115
ISO (PN16) Flange x
6.62 inch (168,3 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-215
ISO (PN16) Flange x
6.50 inch (165,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-225
6.62 inch (168,3 mm) Groove O.D. x
6.62 inch (168,3 mm)
Groove O.D. . . . . . . . . . P/N 52-203-1-925
6.50 inch (165,1 mm) Groove O.D. x
6.50 inch (165,1 mm)
Groove O.D. . . . . . . . . . . P/N 52-203-1-125
8 Inch Valves with NPT Ports
ISO (PN10) Flange x
8.62 inch (219,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-1-896
ISO (PN16) Flange x
8.62 inch (219,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-266
ISO (PN10) Flange x
ISO (PN10) Flange . . . . P/N 52-203-4-016
ISO (PN16) Flange x
ISO (PN16) Flange. . . . . .P/N 52-203-4-118
AS Flange x
AS Flange . . . . . . . . . . . P/N 52-203-4-316
AS Flange x
8.62 inch (219,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-416
JIS Flange x
JIS Flange . . . . . . . . . . . .P/N 52-203-1-716
JS Flange x 8.62 inch (219,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-816
8 Inch Valves with ISO Ports
ISO (PN10) Flange x
ISO (PN10) Flange . . . . .P/N 52-203-4-116
ISO (PN16) Flange x
ISO (PN16) Flange. . . . . .P/N 52-203-4-117
ISO (PN10) Flange x
8.62 inch (219,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-216
ISO (PN16) Flange x
8.62 inch (219,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-4-226
8.62 inch (219,1 mm) Groove O.D. x
8.62 inch (219,1 mm)
Groove O.D. . . . . . . . . . P/N 52-203-1-926
2009 TYCO FIRE SUPPRESSION & BUILDING PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
TFP910
Page 22 of 22