T 80120 Ca

Color profile: Disabled
Composite Default screen
Series 3240
Globe Control Valve Type 3241 (241)
Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)
Application
Control valve for process engineering and plants with industrial
requirements.
Nominal valve sizes to 10 (15 to 250 mm)
Pressure ratings ANSI Class 125 to 300
Temperatures 320 F to +800 F (196 C to +427 C)
The control valves consist of a body with trim, bonnet and pneumatic actuator, optionally with metal bellows or insulating extension. The valves may be also equipped with electric, electrohydraulic, or hand-operated actuators, as well as control accessories and other instrumentation.
Features
Modular design, rugged and heavy duty construction, full
range of body and trim materials
One-piece ultra-rigid valve bonnet and yoke up to size 6
Field retrofittable extension bonnets and metal bellows seals
Many configurations, e.g. Cryogenic or Lethal service
Self-adjusting, live-loaded PTFE V-ring stuffing box
Port-guided V-port asymetric plugs above CV 20 standard
Excellent dynamic response and high trim stability
Self-locking seats, exchangeable for various CV values
Low height, reversible, multi-spring/rolling diaphragm actuator
NAMUR (IEC 534-6) accessory mounting standard
Complete selection of actuators options, positioners and control
accessories
Standard versions available combinations: see Table 1
Body ASTM Cast A 126 Cl. B, A 216 WCB, A 351 CF8M, alternatively Forged A105 or A 182 F316
End connections ANSI Class 125 with FF-Flanges, Class 250
Female threaded NPT, Class 150 or 300 with RF-Flanges
Packing PTFE V-ring spring-loaded/self-adjusting, temperature
range 15 F to 430 F (10 C to +220 C)
Trim equal percentage characteristic , metal-to-metal seal
Options
Body materials optionally A 352 LCB, LC3, A 351 CF8,
CF3, Hastelloy, Monel, and others On request
Packing Adjustable PTFE, graphite or others On request
Extension bonnet module For extreme temperatures 328 to
+842 F (200 to +450 C) with PTFE packing
Metal bellows seal module For complete seal between process and atmosphere, with test connection and PTFE packing
Characteristic Linear (quick-opening on request)
Trim materials Hardened, Hast. C, Monel, other versions
Plug seal PTFE soft seal or lapped-in metal seal
Flow dividers For noise reduction See Tech. Data Sheet T 8081
Pressure-balanced version For high differential pressures
Heating jacket, double stuffing box, micro trim, versions for
sour gas according to NACE On request
Fig. 1 Type 3241/3271

(Type 241-1);
sizes to 10
Fig. 2 Type 3241/3277
(Type 241-7)
Forged steel version;
sizes to 3
Fig. 3 Type 3241/3271

(Type 241-1)
with NPT thread;
sizes to 2
Actuator combinations
Type 3241/3271 (241-1) (Fig. 1) With Type 271 Actuator
(see T 8310)
Type 3241/3277 (241-7) (Fig. 2) With Type 3277 Actuator
for integral positioner attachment (see T 8311)
Type 3241/3273 (241-3) With Type 3273 (273) Handoperated Actuator (see T 8312)
Type 3241/3274 (241-4) With Type 3274 Electrohydraulic
Actuator (see T 8340)
DIN Versions See Data Sheet T 8015 JIS On request
Associated Information Sheets
Valves
Actuators
Accessories
T 8000
T 8300
T 8350
1
C:\Samson\ca\T8012CA.vp
Mon Feb 28 13:04:34 2000
Edition July 1998
Technical Data Sheet
ANSI Version
T 8012

Fail-safe action
Depending on the arrangement of the diaphragm plate and
springs within the actuator, the control valve offers two different
fail-safe actions upon loss of air supply (see Technical Data
Sheets T 8310 and T8311 for details):
Actuator extendsstem (fail-close)
The actuator springs close the valve upon loss of air supply.
Actuator retracts stem (fail-open)
The actuator springs open the valve upon loss of air supply.
Notes on the differential pressure tables 4a to 5d
The differential pressure tables listed have been prepared under
the following conditions:
Process medium flow directed against the closing direction of
the valve plug (flow-to-open valve)
Version with PTFE stuffing box
With the maximum differential pressures specified, the leakage rates specified in Table 1 (ANSI/FCI Class IV) are not exceeded.
The differential pressure specified must not exceed the pressure
rating (see Pressure-Temperature Diagram).
For valve sizes to 3" with actuators containing an effective
diaphragm area of 700 cm2 (108 in2), the maximum permissible supply pressure is 60 psi (4 bar).
For versions with metal bellows seal, soft-sealed plugs and
p2 0 psi (0 bar), consult SAMSON.
Fig. 5 Type 3241 Globe Valve,
forged steel version (up to size 3)
with metal bellows seal module
Fig. 4 Type 3241 Globe Valve, sizes 12 to 6 with

Type 3271 Pneumatic Actuator
Fig. 6 Type 3241 Globe Valve

size 8 to 10''
T 8012
2
Mon Feb 28 13:04:47 2000

Table 1 Technical data

Nominal valve size
in
Body material, ASTM

(also see Table 2)
1 ... 6
... 2
A 126 Class B
End connection
Form of connection
Pressure rating, ANSI (B16.34) Class
Face-to-face dimension
... 10
, 1, 1, 2, 3
... 10
, 1, 1, 2, 3
A 216 Grade
WCB
A 105
A 351 Grade
CF8M
A 182 Grade
F316
Flange
Thread
Flange
Flange
Flat Face
NPT-F
Raised Face1)
Raised Face1)
125
250
150 or 300
300
150 or 300
300
According to ANSI/ISA S-75.03 (Flanges according to ASME/ANSI B16.5)
Seat/plug seal
Metal, soft or lapped-in metal
Packing design
V-ring, spring-loaded, self-adjusting
Flow direction (standard)
Flow to open (FTO)
Seat bore diameter, rated travel, CV/KVS
See Table 3
Characteristic
Equal percentage or linear
Terms for valve sizing according to ISAS75.02 and IEC 60 534, parts 2-1 and 2-2
FL = 0.95, xT = 0.75 (at 75% rated travel)

50:1 for sizes ... 2 30:1 for sizes 2 ... 10
Rangeability
Dimensions and Weights
See Tables 7, 8 and 9
Temperature ranges F (C) Max. operating pressures acc. to pressure-temperature diagram (see Information Sheet T 8000-2)
15 ... 430 F (10 ... 220 C)
Body without insulating section
Body with
Valve plug
Insulating Short
section
Long
-20 ... 445 F (29 ... 230 C)
-20 ... 800 F (29 ... 427 C)
-58 ... 800 F (-50 ... 427 C)
-325 ... 800 F (-198 ... 427 C)
Short
-20 ... 445 F (29 ... 230 C)
-20 ... 800 F ( 29 ... 427 C)
-58 ... 800 F (-50 ... 427 C)
Long
-325 ... 800 F (-198 ... 427 C)
Bellows
section
325 ... 840 F (196 ... 450 C)
Metal sealing
Unbalanced Soft sealing
Balanced
325 ... 428 F (196 ... 220 C)
With PTFE ring
325 ... 428 F (196 ... 220 C)
With graph. ring
+430 ... 800 F (+220 ... 450 C)
Leckage rate class according to ANSI/FCI F70-2 (IEC 60 534 Part 4)
Valve plug
Metal seal
UnPTFE soft sealed
balanced
Lapped-in metal s.
Balanced Metal sealed
Metal-sealed plug
Class IV
Class VI
Class VI (IEC: IV-S2 For 4 or above, Class IV-S1)
With PTFE balancing seal: Class IV With graphite balancing seal: Class III
Flow divider St I,
for cavitation protection with liquids
and noise reduction
with liquids, gases
and steam
PTFE soft-sealed plug
Fig. 7 Trim versions
T 8012
3
Mon Feb 28 13:04:55 2000
Flow divider St III,

for noise reduction
with gases and
steam

Fig. 8 Type 3241 Globe Valve components
80...81
80...81
3
82...84
82...84
10
10
14
13
32
15
26
12
15
33
17
39
12
42
13
41
14
11
11
17
37
7
5
2
7
5
30
22
1
6
24
Metal bellows seal module

Nominal sizes to 6''
Nominal valve size to 6''
Nominal size 8 and 10

(cast body available only)
Table 2 Materials (WN = Material Number according to DIN)

Item
1
Description
Body
(LC3, CF3, CF8, and
others, on request)
A 105
Carbon steel
Cast
A 352 LCB
Stainless steel
Cast A 351 CF8M
Forged A 182 F316
Monel (WN 9.4365)

/ Hastelloy C
(WN 9.4610)
A 350 LF2
A 182 F316
Monel/Hastelloy C
Bonnet
Yoke, (8, 10)
Seat 1)
AISI 410 (WN 1.4006)
AISI 316Ti (WN 1.4571)
Monel/Hastelloy C
Plug 1), 2)
AISI 410 (WN 1.4006)
AISI 316Ti (WN 1.4571)
Monel/Hastelloy C
Plug stem
AISI 410 (WN 1.4006)
AISI 316Ti (WN 1.4571)
Monel/Hastelloy C
Guide bushing
AISI 430F (WN 1.4104) nitrided
AISI 316Ti (WN 1.4571) nitr.
Packing nut
A 395 (WN 0.7043)
(per application)
AISI 316Ti (WN 1.4571) with carbon insert (guide)
Monel/Hastelloy C
Monel/Hastelloy C
Coupling nut
AISI 430F (WN 1.4104)
10
Counter nut
AISI 430F (WN 1.4104)
11
Spring
12
Washer
13
Body stud
A 307 B
A 193 B7
A 320 L7
A 193 B8M Cl.2
(per application)
14
Hex nut
A 307 B
A 193 B7
A 194 Gr.4
A194 8M
(per application)
15
Packing
AISI 301 (WN 1.4310)
Monel/Hastelloy C
AISI 316Ti (WN 1.4571)
Monel/Hastelloy C
PTFE-carbon composite (types A, B, C, H, W, and others on request)

Graphite laminate with AISI 316Ti (WN 1.4571) core
Graph. w/Hast.C
AISI 316Ti (WN 1.4571)
Monel/Hastelloy C
19
Packing spacer (2.5, 3)
22
Extension
24
Guide bushing
30
Lock washer
32
Hex bolt
A 193 B7
33
Hex nut
A 193 B7
37
Extended stem/bellows
AISI 316Ti (WN 1.4571)
Hastelloy C
41
Bellows retaining nut
AISI 316Ti (WN 1.4571)
Monel/Hastelloy C
42
Test connection nut
AISI 316Ti (WN 1.4571)
Monel/Hastelloy C
26,
Label, indicator, bracket,
8084 screw, nameplate, rivets
2)
Carbon steel
Cast A 216 WCB
Forged A 105
17, 39 Gasket
1)
ASTM/AISI Material Description

Gray Iron
Cast
A 126 Cl.B
A 105
A 350 LF2
A 182 F316
Monel/Hastelloy C
AISI 316Ti (WN 1.4571)
Hastelloy C
AISI 304 LN (WN 1.4122)
Hastelloy C
A 320 L7
A 193 B8M C12
(per application)
A 194 Gr.4
A 194 8M
(per application)
AISI 304 (WN 1.4301)
Seats and metal-sealing plugs also available with Stellite 6 facing; for nominal sizes 4, plugs up to SB 48 mm also available of pure Stellite 6.
Seats and plugs of Monel (WN 2.4360), Hastelloy C (WN 2.4610), hard-metal (e.g. tungsten carbide, WN 1.4112) or others on request.
Soft-sealed plug version, with PTFE-glass fiber composite. Pressure-balanced and versions with flow dividers, materials on request.
T 8012
4
Mon Feb 28 13:05:08 2000

Table 3 Cv and Kvs values

Table 3a Overview
0.12 0.2 0.3 0.5 0.75 1.2
Cv
Cv I
Cv III
7.5
1.7 2.6 4.2
Seat ID, in
Travel
in
Kvs
Kvs I
Kvs III
Seat ID, mm
Travel
mm
0.12
20
30
40
70
75
95 120 190 290 305 420 735
10.5 17
12
26
36
62
67
85 105 170 265 275 375 650
23
30
55
0.24
0.47
0.95
1.22 1.5 1.9
0.6
0.1 0.16 0.25 0.4 0.63 1.0 1.6 2.5 4.0 6.3 10 16 25 35
1.45 2.2 3.6 5.7 9 14.5 22 31
7.5
20 26
3
6
12
24
31 38 48
15
2.48
1.2
60 63
54 57
47
63
30
140 220
3.15
3.94
0.6
1.2
80 100 160
72 90 144
120
80
100
15
30
4.92
2.4
250
225
190
125
60
315
5.12
1.2
260
234
130
30
5.91 7.87
2.4
360 630
320 560
270
150 200
60
Table 3b Standard versions (without flow divider) Versions in shadowed fields are also available with balanced valve plugs.
Cv
0.12 0.2 0.3 0.5 0.75 1.2
7.5
12
20
30
40
70
75
95 120 190 290 305 420 735
Kvs
Size in
1
1
2
2
3
4
6
8
10
0.1 0.16 0.25 0.4 0.63 1.0 1.6 2.5 4.0 6.3
10
16
25
35
60
63
80 100 160 250 260 360 630
mm
15
20
25
40
50
65
80
100
150
200
250
Table 3c Versions with St I flow divider (CvI/KvsI) Versions in shadowed fields are also available with balanced valve plugs.
CvI
1.7 2.6 4.2
KvsI
Size in
1
1
2
2
3
4
6
8
10
1.45 2.2 3.6 5.7
mm
15
20
25
40
50
65
80
100
150
200
250
10.5 17
9
26
36
62
67
85 105 170 265 275 375 650
14.5 22
31
54
57
72
90 144 225 234 320 560
Table 3d Versions with St III flow divider (CvIII/KvsIII) Versions in shadowed fields are also available with balanced valve plugs.
CvIII
23
30
55
140 220
315
KvsIII
Size in
1
1
2
2
3
4
6
8
10
7.5
20
26
47
120 190
270
mm
15
20
25
40
50
65
80
100
150
200
250
T 8012
5
Mon Feb 28 13:05:10 2000

Table 4 Differential pressure tables Unbalanced valve plugs
Values specified in the shadowed columns correspond to the standard application, i.e. to rated travel Differential pressures specified in the white columns
apply to maximum pre-stressed springs (max. bench setting range).
Differential pressures enclosed in parentheses refer to mid-travel position.
Observe the notes on the differential pressure tables, listed on page 2.
Table 4a Permissible differential pressures p Pressures in psi
For actuators employing fail-safe action: Actuator extends stem Valve closed at supply pressure 0 psi
Bench range
(psi)
for actuators with
effective area (in2):
37
18.5, 54,
108
217
434
Required supply pressure (psi)

DN
Cv
Kvs
in2
to
1
15 0.12 0.1 18.5 120

to to
to
25 0.3 0.25 37 240
to
2
20 7.5
to
50 12
1 40
and and 20
2 50
1 12 40
to
to
3 80
2
to
3
50
to
80
30
40
2 65
and and 70
3 80
3
80
18
12...36
7...36
0.4 18.5 120

to
1.0 37 240
9...451)
(26...45)
13...48
18...52
15...45
20...34
(26...34)
30...48
(39...50)
12...18
30...45
23...35
34...52
21
33
39
38
47
55
47
38
55
p with p2 = 0 psi
cm2
mm
to
2
6...18
9...33
6...30
(18...30)
Actuator
in
0.5
to
15 1.2
to
2
50
3
4...17
3...15
320
580
580
580
320
580
580
580
580
1.6 18.5 120
130
405
580
2.5
37
240
406
580
580
580
580
580
54
350
580
580
580
580
580
580
80
435
580
75
135
215
350
350
565
580
6.3
10
16
25
35
60
95
80
4 100 75
63
18.5 120
37
240
54
350
145
350
350
550
550
580
580
108 700
350
(580)
18.5 120
44
260
405
37
240
36
75
115
200
200
335
54
350
75
195
195
435
320
580
580
580
108 700
195
(580)
(580)
18.5 120
22
175
275
37
240
19
45
72
130
130
218
54
350
45
125
125
290
200
450
535
580
108 700
126
(580)
(580)
37
240
43
72
72
130
54
350
23
72
72
175
123
275
330
507
108 700
72
(580)
(580)
37
240
20
40
40
72
54
350
12
39
39
94
65
152
190
290
108 700
(580)
39
(333)
(507)
(520)
37
240
22
22
40
54
350
20
20
58
339
94
115
174
108 700
20
20
(305)
(320)
(475)
108 700
38
94
94
217
152
333
390
580
4 100 120 100 108 700
20
58
58
130
94
203
239
362
4, 100,
190 160 108 700
6 150
10
33
33
80
58
123
152
225
6 150 305 260 108 700
135
290 250
4.4
17
17
43
32
85
85
217 1400
49
49
64
110
139
434 2800
230
580
470
580
8 200
217
and and 420 360
434
10 250
217
735 630
434
1)
1400
33
33
43
74
95
2800
157
410
325
490
1400
23
41
52
2800
87
229
181
276
Not for actuator with effective area 18.5 (120 cm2)
T 8012
6
Mon Feb 28 13:05:11 2000

Table 4b Permissible differential pressures p Pressures in bar
For actuators employing fail-safe action: Actuator extends stem Valve fully closed at supply pressure 0 bar
Bench range
(bar)
for actuators with
effective area (cm2):
240
120,350,
700
1400
2800
Required supply pressure (bar)

Size
Cv
Kvs
in2
to
1
15 0.12 0.1 18.5 120

to to
to
25 0.3 0.25 37 240
to
2
20 7.5
to
50 12
1 40
and and 20
2 50
1 40
to
to
3 80
2
to
3
50
to
80
30
40
2 65
and and 70
3 80
3
80
0.4 18.5 120

to
1.0 37 240
1.6 18.5 120
2.5
4
6.3
10
16
25
35
60
95
80
4 100 75
63
1.2
0.6...2.2
0.4...2.0
(1.2...2.0)
0.8...2.4
0.5...2.5
0.8...1.2
2.0...3.0
1.6...2.4
1.4
2.2
2.7
2.6
0.6...3.01)
(1.8...3.0)
3.2
0.9...3.3
1.2...3.6
1.0...3.0
1.4...2.3
2.1...3.3
(1.85...2.3) (2.7...3.3)
3.2
2.5
3.5
2.4...3.6
3.8
p with p2 = 0 bar
cm2
mm
to
2
0.4...1.2
Actuator
in
0.5
to
15 1.2
to
2
50
3
0.3...1.1
0.2...1.0
40
40
40
40
22
40
40
40
40
28
40
37
240
28
40
40
40
40
40
54
350
40
40
40
40
40
40
5.5
30
40
18.5 18.5
37
240
5.2
9.3
14.8
24
24
39
54
350
10
24
24
38
38
40
40
40
108 700
24
(40)
18.5 120
18
28
37
240
2.5
5.2
8.0
14
14
23
54
350
5.2
13.5
13.5
30
22
40
40
40
108 700
13.5
(40)
(40)
18.5 120
1.5
12
19
37
240
1.3
3.1
5.0
9.0
9.0
15
54
350
3.1
8.5
8.5
20
14
31
37
40
108 700
8.7
(40)
(40)
37
240
3.0
5.0
5.0
9.0
54
350
1.6
5.0
5.0
12
8.5
19
23
35
108 700
5.0
(40)
(40)
37
240
1.4
2.8
2.8
5.0
54
350
0.8
2.7
2.7
6.5
4.5
10.5
13
20
108 700
(40)
2.7
(23)
(35)
(36)
37
240
0.6
1.5
1.5
2.8
54
350
1.4
1.4
4.0
2.7
6.5
12
(33)
108 700
1.4
1.4
(21)
(22)
108 700
2.6
6.5
6.5
15
10.5
23
27
40
4 100 120 100 108 700
1.4
4.0
4.0
9.0
6.5
14
16.5
25
4, 100,
190 160 108 700
6 150
0.7
2.3
2.3
5.5
4.0
8.5
10.5
15.5
6 150 305 260 108 700
0.3
1.2
1.2
3.0
2.2
6.0
6.0
9.5
290 250
217 1400
3.4
3.4
4.4
7.5
9.6
434 2800
15.8
40
32.4
40
8 200
217
and and 420 360
434
10 250
217
735 630
434
1)
1400
2.3
2.3
3.0
5.1
6.6
2800
10.8
28.2
22.4
33.9
1400
1.6
2.8
3.6
2800
15.8
12.5
19
Not for actuator with effective area 120 cm2 (18.5 in2)
T 8012
7
Mon Feb 28 13:05:13 2000

Table 4c Permissible differential pressures p
For actuators employing fail-safe action: Actuator retracts stem Valve closed at required supply pressure
Table 4c Pressures in psi
Bench range (bar/psi)
for actuators with
effective area (in2):
18.5 ... 434
3 ... 15
217
(6 ... 30)
Size
Cv
in
mm
to
1
15
to
25
to
2
to
2
15
to
50
20
to
50
1
and
2
40
and
50
1
to
3
40
to
80
2
to
3
50
to
80
2
and
3
65
and
80
80
(4 ... 15)
434
Required supply pressure (bar/psi)

Kvs
18
36
Actuator
in2
cm2
58
p with p2 = 0 psi
0.12
to
0.3
0.1
to
0.25
18.5
120
330
580
37
240
580
0.3
to
1.2
0.4
to
1.0
18.5
120
330
580
37
240
580
580
1.6
18.5
120
130
580
2.5
37
240
410
580
54
350
580
580
18.5
120
10
450
580
37
240
80
580
580
54
350
145
580
580
108
700
350
580
18.5
120
260
580
37
240
35
540
580
54
350
75
580
580
108
700
200
580
18.5
120
160
410
37
240
20
350
580
54
350
45
540
580
108
700
130
580
580
37
240
10
220
490
54
350
25
330
580
108
700
75
580
580
37
240
120
290
54
350
10
190
420
108
700
40
390
580
37
240
75
170
7.5
12
20
30
40
70
95
6.3
10
16
25
35
60
80
54
350
110
260
108
700
20
230
540
100
75
63
108
700
40
390
580
100
120
100
108
700
20
230
520
4
and
6
100
and
150
190
160
108
700
10
145
330
150
305
260
108
700
85
200
217
1400
20
200
440
434
2800
50
410
580
217
1400
140
300
434
2800
35
280
580
217
1400
75
170
434
2800
160
350
290
8
and
10
200
and
250
420
735
250
360
630
T 8012
8
Mon Feb 28 13:05:14 2000

Tables 4d Permissible differential pressures p
For actuators employing fail-safe action: Actuator retracts stem Valve closed at required supply pressure
Table 4d Pressures in bar
Bench range (bar/psi)
for actuators with
effective area (cm2):
120 ... 2800
0.2 ... 1.0
1400
(0.4 ... 2.0)
Size
in
mm
to
1
15
to
25
to
2
to
2
15
to
50
20
to
50
1
and
2
40
and
50
1
to
3
40
to
80
2
to
3
50
to
80
2
and
3
65
and
80
80
(0.3 ... 1.0)
2800
Required supply pressure (bar/psi)
1.2
2.4
p with p2 = 0 bar
Cv
Kvs
in2
cm2
0.12
to
0.3
0.1
to
0.25
18.5
120
23
40
37
240
40
0.3
to
1.2
0.4
to
1.0
18.5
120
23
40
37
240
40
40
1.6
18.5
120
40
2.5
37
240
28
40
54
350
40
40
18.5
120
0.6
31
40
37
240
5.2
40
40
54
350
10
40
40
108
700
24
40
18.5
120
18
40
37
240
2.5
37
40
54
350
5.2
40
40
108
700
13.5
40
18.5
120
11
28
37
240
1.3
24
40
54
350
3.1
37
40
108
700
8.7
40
40
37
240
0.5
15
34
54
350
1.6
23
40
108
700
5.0
40
40
37
240
8.5
20
54
350
0.6
13
29
108
700
2.7
27
40
37
240
5.0
12
7.5
12
20
30
40
70
95
6.3
10
16
25
35
60
80
Actuator
54
350
0.2
7.8
18
108
700
1.4
16
37
100
75
63
108
700
2.6
27
40
100
120
100
108
700
1.4
16
36
4
and
6
100
and
150
190
160
108
700
0.7
10
23
150
305
260
108
700
0.3
6.0
13.5
217
1400
1.3
13.7
30.3
434
2800
3.4
28.3
40
217
1400
9.5
21.0
434
2800
2.3
19.5
40
217
1400
5.2
11.7
434
2800
10.9
23.9
290
8
and
10
200
and
250
420
735
250
360
630
T 8012
9
Mon Feb 28 13:05:15 2000

Table 5 Differential pressure tables Balanced valve plugs with PTFE balancing seal (without bellows)
Values specified in the shadowed columns correspond to the standard application, i.e. to rated travel Differential pressures specified in the white columns
apply to maximum pre-stressed springs (max. bench setting range).
Fail-safe action: Actuator extends stem Valve closed at supply pressure 0 psi (0 bar)
Fail-safe action: Actuator retracts stem Valve closed at required supply pressure
Tables 5a and 5b Permissible differential pressures p Pressures in psi

Table 5a Actuator extends stem
Table 5b Stem retracts
Bench range
Required supply pressure
Size
in
mm
65
80
Cv
Kvs
70
60
psi
3...15
6...18
6...30
12...36
3...15
3...15
6...30
psi
18
21
33
39
18
18
33
580
580
580
Actuator
p with p2 = 0 psi
in2
cm2
54
350
108
700
580
580
580
54
350
580
580
580
580
580
580
580
80
95
80
108
700
580
580
580
100
75
63
108
700
440
580
580
580
440
580
580
4
6
100
150
190
160
108
700
580
580
580
170
580
580
150
305
260
108
700
580
580
580
580
580
Tables 5c and 5d Permissible differential pressures p Pressures in bar

Table 5c Actuator extends stem
Table 5d Stem retracts
Bench range
bar
0.2...1.0
0.4...1.2
0.4...2.0
0.8...2.4
0.2...1.0
0.2...1.0
0.4...2.0
bar
1.2
1.4
2.2
2.6
1.2
2.0
3.0
Size
Cv
Kvs
70
60
80
95
80
100
75
4
6
100
150
150
in
mm
65
80
Actuator
in2
p with p2 = 0 bar
cm2
54
350
40
40
40
40
40
108
105
40
40
40
54
350
40
40
40
40
40
108
700
40
40
40
63
108
700
30
40
40
40
30
40
40
190
160
108
700
40
40
40
12
40
40
305
260
108
700
40
40
40
40
40
Fig. 9 Version with pressure-balanced plug and bonnet
T 8012
10
10
Mon Feb 28 13:05:19 2000

Table 6 Differential pressure tables Balanced valve plugs with PTFE balancing seal with metal bellows seal
Values specified in the shadowed columns correspond to the standard application, i.e. to rated travel Differential pressures specified in the white
columns apply to maximum pre-stressed springs (max. bench setting range).
Differential pressures enclosed in parentheses refer to mid-travel position.
Fail-safe action: Actuator extends stem Valve closed at supply pressure 0 psi (0 bar)
Fail-safe action: Actuator retracts stem Valve closed at required supply pressure
Tables 6a and 6b Permissible differential pressures p Pressures in psi

Table 6a Actuator extends stem
Table 6b Stem retracts
Bench range
psi
3...15
6...18
psi
18
21
Size
in
mm
65
80
Cv
Kvs
70
60
6...30
12...36
(18...30)
33
39
Actuator
9...45
18...52
3...15
6...30
9...45
48
55
18
44
60
580
580
p with p2 = 0 psi
in2
cm2
54
350
108
700
54
350
250
250
580
520
250
580
(580)
250
580
170
174
580
450
580
580
80
95
80
108
700
170
580
(580)
170
580
100
75
63
108
700
75
250
250
580
440
580
75
580
4
6
100
150
190
160
108
700
200
200
550
380
580
20
540
150
305
260
108
700
160
160
510
330
580
580
Tables 6c and 6d Permissible differential pressures p Pressures in bar

Table 6c Actuator extends stem
Table 6d Stem retracts

bar
Bench range
Size
in
mm
65
80
bar
Cv
Kvs
70
60
0.2...1.0 0.4...1.2
1.2
1.4
0.4...2.0
0.8...2.4 0.6...3.0 1.2...3.6 0.2...1.0 0.4...2.0 0.6...3.0
(1.2...2)
2.2
2.6
Actuator
3.2
3.8
1.2
3.0
4.0
40
40
p with p2 = 0 bar
in2
cm2
54
350
108
700
54
350
17
17
40
36
17
40
(40)
17
40
12
12
40
31
40
40
80
95
80
108
700
12
40
(40)
12
40
100
75
63
108
700
5.0
17
17
40
30
40
5.0
40
4
6
100
150
190
160
108
700
14
14
38
26
40
1.5
40
150
305
260
108
700
11
11
35
23
40
40
T 8012
11
11
Mon Feb 28 13:05:20 2000

Table 7a Dimensions of the standard versions in inches

Size
Globe valve
Length L
Length L1
H1
actuators with
effective area:
in
NPT
10
125/150
in
7.25
7.25
7.25
8.75
10.0
10.87
11.75
13.87
17.75
21.38
26.5
Class 300
in
7.50
7.62
7.75
9.25
10.50
11.50
12.50
14.50
18.62
22.38
27.88
Class 250
in
9.25
700 cm2
in
cm2
in
31.7
2800 cm2
in
41.7
1400
H2 (approximately)
in
H2 (approx.), forged steel
in
8.6
10.2
1.8
2.1
2.8
2.7
3.6
13.8
3.8
3.8
15.3
4.5
6.9
5.0
9.3
10.2
Size
120
240
350
700
1400
2800
in2
18.5
37
54
108
217
434
Diaphragm D
in
6.6
9.5
11.0
15.4
20.9
30.3
in
2.7
2.6
3.4
5.3
11.3
19.5
Pneumatic actuator
H3
1)
in
4.3
7.5
Thread
M 30 x 1.5
(for Type 3271 Actuator)
2)
NPT
a2 (for Type 3277 Actuator)
2)
1)
2)
NPT
1
8
NPT 3 8
1
4
24.0
25.5
M 60 x 1.5
M 100 x 2
NPT 3 4
NPT 3 8
NPT 1
Minimum clearance for actuator disassembly (for both Types 3271 and 3277)
ISO G (straight) thread also available, on request
Table 8a Weights in lbs

Size
Globe valve
Weight, without actuator
inch
10
lbs
11
13
15
26
33
53
66
92
264
728
840
Size
120
240
350
in2
18.5
37
Weight of Type 271
lbs
6.6
11
Weight of Type 3277
lbs
7.7
20
Pneumatic actuator
H3
H3
700
1400
2800
54
108
217
434
18
48.5
154
990
26.5
57.5
a
H3
100
H1
H1
a2
H1
NPT
H2
H2
H2
L
L
Type 3241/3271 to 6
Type 3241/3271 8 and 10
Type 3241/3277 to 6
Type 3241 NPT " to 2"
T 8012
12
12
Mon Feb 28 13:05:27 2000
L1

Table 7b Dimensions of the standard versions in mm

Size
Globe valve
Length L
Length L1
H1
actuators with
effective area:
in
10
mm
15
20
25
40
50
65
80
100
150
200
250
451
543
673
473
568
708
NPT
125/150
mm
184
184
184
222
254
276
298
352
Class 300
mm
191
194
197
235
267
292
318
368
Class 250
mm
152.4
152.4
152.4
203.2
235
700 cm2
mm
1400 cm2
mm
2800 cm2
mm
220
260
350
390
805
mm
H2 (approx.) forged steel
mm
Pneumatic actuator
cm2
120
240
350
700
1400
2800
Diaphragm D
mm
168
240
280
390
530
770
mm
69
65
85
134
287
620
H3
1)
45
1060
H2 (approximately)
53
72
70
mm
92
2)
NPT
a2 (for Type 3277 Actuator)
2)
2)
113
175
128
NPT
1
8
190
NPT 3 8
1
4
235
260
M 30 x 1.5
(for Type 3271 Actuator)
1)
98
110
Thread
a
98
610
648
M 60 x 1.5
M 100 x 2
NPT 3 4
NPT 3 8
NPT 1
Minimum clearance for actuator disassembly (for both Types 3271 and 3277)
ISO G (straight) thread also available, on request
Table 8b Weights in kg
in
10
mm
15
20
25
40
50
65
80
100
150
200
250
Weight, without actuator
kg
12
15
24
30
42
120
330
380
Pneumatic actuator
cm2
120
240
350
700
1400
2800
Weight of Type 3271
kg
22
70
450
Weight of Type 3277
kg
3.5
12
26
Size
Globe valve
H3
H3
a
H3
100
H1
H1
a2
H1
NPT
H2
H2
H2
L
L
Type 3241/3271 to 6
Type 3241/3271 8 and 10
Type 3241 NPT " to 2"
T 8012
13
13
Mon Feb 28 13:05:33 2000
Type 3241/3277 to 6
L1

Table 9 Dimensions and weights of special versions with insulating section or metal bellows seal (without actuator)
Table 9a Nominal sizes to 6 and NPT to 2 in inches and lbs
Globe valve
Height
H4
Size/NPT in
Short insul.
in
or bell. sect.
15.9
15.5
Long. insul.
in
or bell. sect.
27.9
27.9
Approximate weight
lbs
18
20
22
40
46
17.1
25
25.8
29.1
34.5
35.2
132
330
71
84
Table 9b Nominal sizes 8 and 10 in inches and lbs

Version with
Insulating section
Size
Pneumatic actuator
1400
in2
Metal bellows section

2800
1400
2800
217
434
217
434
H4 for nom. sizes 8, 10 in
49.2
58.3
57.2
66.4
840
885
860
905
10
950
995
970
1015
Approximate weight in
lbs for nominal sizes
Table 9c Nominal sizes to 6 and NPT to 2 in mm and kg

Globe valve
Height H4
Size/NPT
in
mm
15
20
25
40
50
65
80
100
150
Short insul.
mm
or bell. sect.
405
395
435
635
655
Long. insul.
or bel. sect.
710
710
740
875
895
60
150
Approximate weight
mm
kg
10
18
21
32
38
Table 9d Nominal sizes 8 and 10 in mm and kg

Version with
Insulating section
Metal bellows section
cm2
1400
2800
1400
2800
H4 for sizes 200, 250
mm
1250
1480
1453
1687
Approximate weight in
kg for nominal sizes
200
380
400
390
410
250
430
450
440
460
Pneumatic actuator
Dimensions and weights of versions with heating jacket are available on request.
Type 3241 (241) Globe Valve with insulating section or metal bellows seal
H4
H4
Sizes to 6
H4
Sizes 8 and 10
T 8012
14
14
Mon Feb 28 13:05:42 2000
NPT to 2

Pressure-Temperature Diagram
According to ASME/ANSI B16.34, Cast Iron according to B16.1 (Flanged) and B16.4 (NPT)
For reference only. For exact values, consult the respective ANSI standard.
[bar]
60
[psi]
A 126 B
A 216 WCB
A 351 CF8M
900
Class 300
50
700
40
Class 300
500
30
Class 250
300
20
10
-325
-196
-200
Class 150
Long insulating section
-50
0
Short
insul.
section
Class 150
100
-100 -60 -20 0 32
-100
Class 125
100
200
400 430
100
200
Without insulating section
600
300
[F]
800
400 427
850
t
[C]
Short insulating section
Long bellows section

Short bellows section
Installation
Arbitrary mounting orientation. If the mounting orientation is
inclined, the actuator and valve must be supported. Observe
the clearance is adequate to allow actuator, bonnet and plug removal (H3 in the table of dimensions). Direction of flow as indicated by the arrow on the valve body
Registered Trade Marks

Monel, Hastelloy, and Stellite are referred to within this publication with the understanding that the names are Registered Trade
Marks of their respective owners, which include Cabot Wrought
Products, International Nickel Co., Carpenter Technology, or the
rightful owner, in the past as well as in future cases.
T 8012
15
15
Mon Feb 28 13:05:45 2000

Ordering information
Globe Control Valve Type 3241 (241):
Nominal valve size1)
Body material ASTM
Pressure rating ANSI Class
CV-/KVS-value1) Characteristic
Options/Special version
Special testing/preparation
Actuator:
Type
Ordering information 5)
Fail-safe position
Operating conditions 2):
Process fluid 3) Flow rate 4)
Inlet pressure
Outlet pressure 4)
Temperature
Maximum shutoff p for actuator sizing
Air/power supply available for actuator, max./min.
Accessories:
Positioner, Switches, Transmitter, Solenoid valve, Filter/regulator,
Bypass, Volume/pressure amplifier, Lockup relay
Type
Tubing and fittings type/material
Other instrumentation:
Controllers, Sensors, Transmitters, Transducers, Converters
Type
Notes:
1)
2)
3)
4)
5)
If nominal size or CV-/KVS-value unknown, specify operating

conditions
Specify system of units, pressures: specify gauge or absolute
Provide minimum, normal, and maximum values, where applicable.
Gases, vapors: specify flow rate under standard or actual conditions
Non-standard process fluids, specify additionally:
Density, Specific gravity, or Molecular weight
Liquids: Vapor pressure, Critical pressure, Viscosity
Gases, Vapors: Ratio of specific heats, Compressibility factor
Or, specify required valve flow coefficient CV, KVS
Ordering information per the applicable Technical Data Sheet.
SAMSON CONTROLS INC.

1 - 105 Riviera Drive
Markham Ontario Canada L3R 5J7
Tel. (905) 474 - 0354 Telefax (905) 474 - 0998
SAMSON CONTROLS INC.

4111 Cedar Boulevard
Baytown Texas USA 77520-8588
Tel. (281) 383 - 3677 Telefax (281) 383 - 3690
16
Mon Feb 28 13:05:46 2000
T 8012
T 8012 CA
Specifications subject to change without notice.

T 80120 Ca

Uploaded by

Copyright:

Available Formats

T 80120 Ca

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

T 80120 Ca

Uploaded by

Copyright:

Available Formats

Color profile: Disabled

Composite Default screen

Fig. 1 Type 3241/3271

Fig. 3 Type 3241/3271

DIN Versions See Data Sheet T 8015 JIS On request

Associated Information Sheets

Edition July 1998

Technical Data Sheet

Color profile: Disabled

Fig. 4 Type 3241 Globe Valve, sizes 12 to 6 with

Fig. 6 Type 3241 Globe Valve

Color profile: Disabled

Table 1 Technical data

Body material, ASTM

According to ANSI/ISA S-75.03 (Flanges according to ASME/ANSI B16.5)

Metal, soft or lapped-in metal

V-ring, spring-loaded, self-adjusting

Flow direction (standard)

Flow to open (FTO)

Seat bore diameter, rated travel, CV/KVS

Equal percentage or linear

FL = 0.95, xT = 0.75 (at 75% rated travel)

See Tables 7, 8 and 9

Body without insulating section

-20 ... 445 F (29 ... 230 C)

-20 ... 800 F (29 ... 427 C)

-58 ... 800 F (-50 ... 427 C)

-325 ... 800 F (-198 ... 427 C)

-20 ... 445 F (29 ... 230 C)

-20 ... 800 F ( 29 ... 427 C)

-58 ... 800 F (-50 ... 427 C)

-325 ... 800 F (-198 ... 427 C)

325 ... 840 F (196 ... 450 C)

325 ... 428 F (196 ... 220 C)

With PTFE ring

325 ... 428 F (196 ... 220 C)

With graph. ring

+430 ... 800 F (+220 ... 450 C)

Leckage rate class according to ANSI/FCI F70-2 (IEC 60 534 Part 4)

PTFE soft-sealed plug

Fig. 7 Trim versions

Flow divider St III,

Color profile: Disabled

Fig. 8 Type 3241 Globe Valve components

Metal bellows seal module

Nominal valve size to 6''

Nominal size 8 and 10

Table 2 Materials (WN = Material Number according to DIN)

Monel (WN 9.4365)

Yoke, (8, 10)

AISI 410 (WN 1.4006)

AISI 316Ti (WN 1.4571)

AISI 410 (WN 1.4006)

AISI 316Ti (WN 1.4571)

AISI 410 (WN 1.4006)

AISI 316Ti (WN 1.4571)

AISI 430F (WN 1.4104) nitrided

AISI 316Ti (WN 1.4571) nitr.

A 395 (WN 0.7043)