1.225V Micropower Shunt Voltage Reference: Description
1.225V Micropower Shunt Voltage Reference: Description
1.225V Micropower Shunt Voltage Reference: Description
I I I I I
Computers Instrumentation Battery chargers Switch Mode Power Supply Battery operated equipments
ORDER CODE
Precision TO92 SOT23-3 SOT23 Marking L213 L212 L211
2% TS821IZ TS821ILT 1% TS821AIZ TS821AILT 0.5% TS821BIZ TS821BILT Single temperature range: -40 to +85C
Z = TO92 Plastic package - also available in Bulk (Z), Tape & Reel (ZT) and Ammo Pack (AP) LT = Tiny Package (SOT23-3) - only available in Tape & Reel (LT)
March 2002
1/9
TS821
ABSOLUTE MAXIMUM RATINGS
Symbol Ik If Pd Tstd ESD Tlead Parameter Reverse Breakdown Current Forward Current Power Dissipation
1)
Unit mA mA mW C kV V C
SOT23-3 TO92
Storage Temperature Human Body Model (HBM) Machine Model (MM) Lead Temperature (soldering, 10 seconds)
1. Pd has been calculated with T amb = 25C and Tj = 150C and Rthja = 200C/W for the TO92 package Rthja = 340C/W for the SOT23-3L package
OPERATING CONDITIONS
Symbol Imin Imax Toper Minimum Operating Current Maximum Operating Current Operating Free Air Temperature Range Parameter Value 45 12 -40 to +85 Unit A mA C
ELECTRICAL CHARACTERISTICS TS821 (2% Precision) Tamb = 25C (unless otherwise specified)
Symbol Vk Parameter Reverse Breakdown Voltage Test Condition Ik = 100A Min. 1.200 -25 +34 40 Typ. 1.225 Max. 1.250 +25 +34 45 50 120 0.3 2.5 0.25 120 200 0.7 1 8 10 0.5 Unit V mV A ppm/C
I = 100A Reverse Breakdown Voltage Tolerance k -40C < Tamb < +85C Minimum Operating Current Tamb = 25C -40C < Tamb < +85C Ik = 100A Ikmin < Ik < 1mA -40C < Tamb < +85C 1mA < Ik < 12mA -40C < Tamb < +85C Ik = 45A to 1mA Ik = 100A, t = 1000hrs Ik = 100A 10Hz < f < 10kHz
Ikmin
Vref/T Average Temperature Coefficient Vk/Ik Reverse Breakdown Voltage Change with Operating Current Range Static Impedance Long Term Stability Wide Band Noise
mV ppm nV/Hz
Rka Kvh En
Note : Limits are 100% production tested at 25C. Limits over temperature are guaranteed through correlation and by design.
2/9
TS821
ELECTRICAL CHARACTERISTICS TS821A (1% Precision) Tamb = 25C (unless otherwise specified)
Symbol Vk
Parameter Reverse Breakdown Voltage Reverse Breakdown Voltage Tolerange Minimum Operating Current
Test Condition Ik = 100A Ik = 100A -40C < Tamb < +85C Tamb = 25C -40C < Tamb < +85C Ik = 100A Ikmin < Ik < 1mA -40C < Tamb < +85C 1mA < Ik < 12mA -40C < Tamb < +85C Ik = 45A to 1mA Ik = 100A, t = 1000hrs Ik = 100A 10Hz < f < 10kHz
Typ. 1.225
Unit V mV A ppm/C
Ikmin
40
45 50 120
Vref/T Average Temperature Coefficient Vk/Ik Reverse Breakdown Voltage Change with Operating Current Range Static Impedance Long Term Stability Wide Band Noise
0.7 1 5 7 0.5
mV ppm nV/Hz
Rka Kvh En
Note : Limits are 100% production tested at 25C. Limits over temperature are guaranteed through correlation and by design.
Symbol Vk
Typ. 1.225
Unit V mV A ppm/C
I = 100A Reverse Breakdown Voltage Tolerange k -40C < Tamb < +85C Minimum Operating Current Tamb = 25C -40C < Tamb < +85C Ik = 100A Ikmin < Ik < 1mA -40C < Tamb < +85C 1mA < Ik < 12mA -40C < Tamb < +85C Ik = 45A to 1mA Ik = 100A, t = 1000hrs Ik = 100A 10Hz < f < 10kHz
Ikmin
40
45 50 120
Vref/T Average Temperature Coefficient Vk/Ik Reverse Breakdown Voltage Change with Operating Current Range Static Impedance Long Term Stability Wide Band Noise
0.7 1 5 7 0.5
mV ppm nV/Hz
Rka Kvh En
Note : Limits are 100% production tested at 25C. Limits over temperature are guaranteed through correlation and by design.
3/9
TS821
Reference voltage versus cathode current
12 8 4 0 -4 -8
50
-50
-1 -0.5 0 0.5 1 1.5
-1
-0.5
1.5
Test circuit
CL=10F
CL=100F CL=0F
100 0
-20
0 20 40 60 Temperature (C)
80
10
100
1,000
10,000
Frequency (Hz)
4/9
TS821
Pulse response for Ik=100A
3V
18K
Ik=1 00A
0V Input
1.225V 0V Output
10
Time (s)
1.8K
Ik=1m A
0V
1.225V Output 0V
10
Time (s)
Output
5/9
Intput
Pulse G enerator
Output
Intput
P ulse G enerator
TS821
PACKAGE MECHANICAL DATA 3 PINS - PLASTIC PACKAGE TO92 (TAPE & REEL)
A1 P P T H
H1
H0
I1
W0
D0 F1 F2 P2 P0
W2 W1 W
L1
Millimeters Dim. Min AL A T d I1 P PO P2 F1/F2 h P W W0 W1 W2 H H0 H1 DO L1 Typ. Max. 5.0 5.0 4.0 0.45 2.5 11.7 12.4 5.95 2.4 -1 -1 17.5 5.7 8.5 12.7 12.7 6.35 2.5 0 0 18.0 6 9 13.7 13 6.75 2.8 1 1 19.0 6.3 9.75 0.5 20 16.5 25 4.2 11 0.098 0.461 0.488 0.234 0.094 -0.039 -0.039 0.689 0.224 0.335 Min.
Inches Typ. Max. 0.197 0.197 0.157 0.018 0.500 0.500 0.250 0.098 0 0 0.709 0.236 0.354 0.539 0.512 0.266 0.110 0.039 0.039 0.748 0.248 0.384 0.020 0.787 0.650 0.984 0.165 0.433
15.5 3.8
16 4.0
0.610 0.150
0.630 0.157
6/9
TS821
PACKAGE MECHANICAL DATA 3 PINS - PLASTIC PACKAGE TO92 (TAPE AMMO PACK)
A1 P P T H
H1
H0
I1
W0
D0 F1 F2 P2 P0
W2 W1 W
L1
Millimeters Dim. Min AL A T d I1 P PO P2 F1/F2 h P W W0 W1 W2 H H0 H1 DO L1 Typ. Max. 5.0 5.0 4.0 0.45 2.5 11.7 12.4 5.95 2.4 -1 -1 17.5 5.7 8.5 12.7 12.7 6.35 2.5 0 0 18.0 6 9 13.7 13 6.75 2.8 1 1 19.0 6.3 9.75 0.5 20 16.5 25 4.2 11 0.098 0.461 0.488 0.234 0.094 -0.039 -0.039 0.689 0.224 0.335 Min.
Inches Typ. Max. 0.197 0.197 0.157 0.018 0.500 0.500 0.250 0.098 0 0 0.709 0.236 0.354 0.539 0.512 0.266 0.110 0.039 0.039 0.748 0.248 0.384 0.020 0.787 0.650 0.984 0.165 0.433
15.5 3.8
16 4.0
0.610 0.150
0.630 0.157
7/9
TS821
PACKAGE MECHANICAL DATA 3 PINS - PLASTIC PACKAGE TO92 (BULK)
Millimeters Dim. Min L B O1 C K O2 a 3.2 4.45 4.58 12.7 0.407 0.35 Typ. 1.27 3.7 5.00 5.03 0.5 Max. 4.2 5.2 5.33 0.508 Min. 0.126 0.1752 0.1803 0.5 0.016 0.0138
Inches Typ. 0.05 0.1457 0.1969 0.198 0.0197 Max. 0.1654 0.2047 0.2098 0.02
8/9
TS821
PACKAGE MECHANICAL DATA 3 PINS - TINY PACKAGE (SOT23-3)
L E1 E b
c
e1
C
A2
Millimeters Dimensions Min. A A1 A2 b c D E E1 e e1 L L1 k 0.890 0.010 0.880 0.300 0.080 2.800 2.100 1.200 Typ. Max. 1.120 0.100 1.020 0.500 0.200 3.040 2.640 1.400 Min. 0.035 0.0004
A1
0.10
SEATING PLANE
L1
Inches Typ. Max. 0.044 0.004 0.040 0.020 0.008 0.120 0.104 0.055
0.950
0.400 0
0.600 8
0.016
0.024
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States http://www.st.com
9/9