1/27/2014 Ball Type Check Valves, Non-Return Valves, Ball Type Non-Return Valves, Check Valves, Low Pressure

Check Valves, Wafer Type Check Valves, india

http://www.normexvalves.com/ballnrv.html 1/5

[ Home ] [ Company ] [ Products ] [ Contact us ] [ Distributor ] [ Selection Chart ][Feedback]

[ Up ] [ NRV ] [ FTV ] [ BFV ] [ HGC ] [ WCV ]


Ball Type Check Valves
Normex Standard Ball NRV B - 01

Check Valve - Ball type (non-return valve) was the first valves at Normex with a unique design. A very
simple but robust design with no critical mechanism involved. All parts like hinge-pin-disc mechanism
used in conventional valve are eliminated, and Normex has put in a reinforced rubber coated ball to arrest
flow media in return condition. This ball, moves totally out of the flow path when the pumping is on to give
minimum head losses. The spherical rubber coated ball seals perfectly on the rounded valve seat
ensuring a totally leak proof sealing. This design offers other advantages like non-clogging & self cleaning.
In this virtually maintenance free valves, if required, after prolonged usage, the on-line replacement of the
ball is just a minute job.

n Lower power consumption
n Larger solid handling capacity
n Self cleaning, Non-Clogging
n Perfect Sealing
n Low pressure drop


Ball Check Valves ( Flanged ) - Model B - 01

Materials :
Body & Cover: CI (GG25)
Ball : Nitrile rubber coated
Seat : Leaded Tin Bronze
Other materials on request
Sizes : 25 to 350 NB
Pressure rating : 25 to 125 NB: PN1.6
150 to 300 NB: PN 1.0
350 NB : PN 0.6
( For CI Construction. )
Installation : Vertical / Horizontal



Normex Ball Non Return Valves

Principle:
1/27/2014 Ball Type Check Valves, Non-Return Valves, Ball Type Non-Return Valves, Check Valves, Low Pressure Check Valves, Wafer Type Check Valves, india
http://www.normexvalves.com/ballnrv.html 2/5
Part Description Standard Special
1. Body Cast Iron St. Steel, Cast
Steel
2. Cover Cast Iron St. Steel, Cast
Steel
3. Ball Nitrile
Reinforced
EPDM, Neoprene
4. Cover Ring Nitrile Rubber Butyle, Viton
5. Ball Seat
Ring
L. T. Bronze St. Steel, Hard
Rub.
6. Fasteners Carbon Steel St. Steel
The heart of this valve is a reinforced rubber ball. The unique design of the valve
allows free movement of the ball. The ball moves to open position when the
pump starts & allows free flow of liquid without any interference (See Fig.). As
the pump stops, the ball seats firmly against the metal seat due to its own
weight & back pressure of the liquid (Mouse over fig.). This results in
DROPLESS sealing.


n Dimensionally compatible with IS 5312 (Face to Face)
n Can be installed vertically or horizontally
n Operates silently
n Operates at temp 80 C continuously
(for 100 C application please contact us.)

Part List / Materials of Construction














Dimensions (A = Valve size in mm)
A 25 40 50 65 80 100 125 150 200 250 300 350
D 115 150 165 185 200 220 250 285 340 395 445 527
L 144 174 200 240 260 300 350 400 500 600 700 800
H 115 160 180 210 230 280 340 400 500 570 680 800
T 15 15 16 16 19 20 21 21 22 24 25 29

Pressure rating
Size 25 - 125 mm = PN 16
Body test : 1.5 times rated Pressure
Seat test : 1.1 times rated Pressure


Comparison

Normex check valve - Ball type
Conventional
non - return valve

1/27/2014 Ball Type Check Valves, Non-Return Valves, Ball Type Non-Return Valves, Check Valves, Low Pressure Check Valves, Wafer Type Check Valves, india
http://www.normexvalves.com/ballnrv.html 3/5
1. Head Loss
(Pressure
Drop)
Low, Due to light, free flowing rubber ball,
without causing any interference, resulting in
lower power consumption (frictionless)

High, Due to interference of the heavy
hinge/disc mechanism, with the flow
resulting in high power consumption.
2. Perfect
Sealing

The sealing face is deposit free, since it
remains inclined in any position of the valve,
ensuring perfect sealing. (Drop less)


Deposits on the sealing due to its
flatness may not ensure perfect sealing.

3. Solid
Handling
Capacity
Clear passage, equal to nominal valve dia.
gives larger solid handling capacity
The above interference leaves a clear
passage less than the normal valve dia.,
hence smaller solid handling capacity
4. Self
Cleaning
Any deposits formed on the ball and in the
valve passage are removed due to the rolling of
the ball in operation.
No such possibility
5.
Non-
Clogging
Nature
No moving parts other than the free moving
ball, hence no jamming/clogging.
Moving parts may jam due to deposits.
6.
Applications
Unlimited. Ideal for slurries, sewage, viscous,
erosive & corrosive liquids.
Limited. Troublesome for slurries,
sewage & viscous liquids.
7.
Maintenance
Abrasion resistance of rubber ensures longer
life. Also the cleanout port does not
necessitate valve removal from the pipeline.
Hence much shorter downtime.
Parts may wear out due to abrasion.
Also, valve may be removed from the
pipeline for maintenance/ cleaning.
Hence longer down time.

Normex Rubber lined /FRP lined NRV B - 02

This ball check valve can be offered with inside lining of Rubber / FRP
with all its advantages. The lining of Ebonite hard, Neoprene, Butyle etc.,
can also be offered depending on chemicals / abrasives handled.
This is the best valve for abrasives / chemicals.

The overall dimension of this valve will be similar to standard check valve,
but face to face length will be more by 6 - 10 mm
Size 25 350 mm


Rubber Lined Ball Check Valves - Model B - 02
1/27/2014 Ball Type Check Valves, Non-Return Valves, Ball Type Non-Return Valves, Check Valves, Low Pressure Check Valves, Wafer Type Check Valves, india
http://www.normexvalves.com/ballnrv.html 4/5
Part Description Material
1. Body Cast Iron
2. Strainer Cast Iron
3. Ball Nitrile Rubber
4. Seal Ring Nitrile Rubber

These valves are lined internally with rubber so that media does not
come in
contact with metal. Most suitable for corrosive/erosive applications.
Materials : Body & Cover: CI(GG25)
Ball: Nitrile rubber coated
Seat: Integral
Lining: Ebonite Hard
Sizes : 25 to 350 NB
Pressure rating : 25 t0 125NB : PN 1.6
150 to 300 NB : PN 1.0
350 NB : PNO.6 (For CI Construction.)
Installatlon : Vertical / HOrizontal

1.

Normex Low Pressure check valve (Threaded) B - 06

Low pressure check valve is having both ends threaded & has got all the
advantages of standard ball check valve. This valve works vertically or
horizontally.

Sizes : 25 100 mm working pressure
6 kg/cm
2

Sizes : 100, 125 & 150 mm available in flanged top & bottom


Ball Check valves ( Threaded ) - Model B - 06

Materials : Body : CI(GG24)
Ball : Nitrile rubber coated
Seat : Nitrile
Other materials on request
Sizes : 25 to 100 NB
Pressure rating : PNO.6
(For CI Construction.)
Installation: Vertical/ Horizontal/Inclined



Part List / Materials of Construction







1/27/2014 Ball Type Check Valves, Non-Return Valves, Ball Type Non-Return Valves, Check Valves, Low Pressure Check Valves, Wafer Type Check Valves, india
http://www.normexvalves.com/ballnrv.html 5/5
5. Fastener Carbon Steel
6. Adaptor Cast Iron
Size(A) 25 40 50 65 80 100
H 100 135 165 200 244 284
W 90 125 148 190 232 275



Dimensions ( Valve size in mm)

Pressure rating = PN 6



Technical Comparison

CHECK VALVE - BALL TYPE
&
CONVENTIONALLLY USED FLAP TYPE
Normex Ball type B-01 Conventional Flap type
Innovative design, focused to eliminate all
constraints of conventional one and offer optimum
performance
Conventional design carries lot of constraints.
Internals designed in such a way that laminar flow
is not disturbed to a large extent.
Turbulance is generated in fluid flow due to design
limitations.
Very low pressure drop acros the valve which
saves energy, reduces pump cycle time duration
Comparatively high pressure losses, requires more
energy increases pump cycle time duration.
Opening & closing mechanism is by way to free
flowing rubber coated ball hence eliminated hing-
pin-disc failure.
Opening & closing mechanism involves hing-pin-
disc calls for frequent maintenance.
Maintenance free - in case required open top
cover. No need to remove valve from pipe line - very
low down-time.
For maintenance, valve is required to remove from
pipe.
Longer down time.
Same valve can be used for wide range of
applications as it can be supplied with ruibber or
FRP lining especially for corrosive and errosive
applications.
No such possibility. For these applications special
metallurgy required to be used which results in
paying high cost for the valve.
Vertical or horizontal installation is easily possible Installation recommended for horizontal position.
Material used is of grade FG 260 having higher
tensile strength (26 N/mm2)
Material recommended is FG 200 having lower
tensile strength (20 N/mm2)
*For more details contact Normex


Ball type Check Valves | Ball type Foot Valves | Wafer type Butterfly Valves |
Hydrodynamic Guided Closing ( HGC ) Check Valves | Wafer type Check Valves |
Home | Company Profile |Contact | Feedback

Designed by : MI D Hosted by : PBD Promoted by : GI D