15 To 16 Group Theory - E
15 To 16 Group Theory - E
15 To 16 Group Theory - E
in"
1
CHEMISTRY
pBLOCK ELEMENTS
Introduction :
Group 13 to 18 of the periodic table of elements constitute the pblock. The pblock contains metals,
metalloids as well as nonmetals.
The pblock elements have general valence shell electronic configuration ns
2
np
16
.
The first member of each group from 1317 of the pblock elements differ in many respects from the other
members of their respective groups because of small size, high electronegativity and absence of dorbitals.
The first member of a group also has greater ability to formptptmultiple bonds to itself (e.g. C=C, CC, NN)
and to element of second row(e.gC=O, C=N, CN, N=O) compared to the other members of the same group.
The highest oxidation of pblock element is equal to the group number 10. Moving down the group, the
oxidation state two less than the highest group oxidation state becomes more stable in groups 13 to 16 due
to inert pair effect (reluctance of s-subshell electrons to participate in chemical bonding)
GROUP 15 ELEMENTS : THE NITROGEN FAMILY
Group 15 includes nitrogen phosphorus, arsenic, antimony and bismuth. As we go down the group, there is
a shift from non-metallic to metallic through metalloidic character. Nitrogen and phosphorus are non-metal,
arsenic and antimony metalloid and bismuth is a typical metal.
Electronic Configuration :
The valence shell electronic configuration of these element is ns
2
np
3.
The s orbital in these element is
completely filled and p orbitals are half- filled, making their electronic configuration extra stable.
Atomic and Ionic Radii :
Covalent and ionic (in a particular state) radii increase in size down the group. There is a considerable
increase in covalent radius from N to P. However, fromAs to Bi only a small increase in covalent radius is
observed. This is due to the presence of completely filled d and / or f orbitals in heavier members.
Ionisation Enthalpy:
Ionisation enthalpy decreases down the group due to gradual increase in atomic size. Because of the extra
stable half- filled p-orbital electronic configuration and smaller size, the ionisation enthalpy of the group 15
element is much greater than of group 14 elements in the corresponding periods. The order of successive
ionisation enthalpies, as expected is A
i
H
1
< A
i
H
2
< A
i
H
3
Electronegativity :
The electronegativity value, in general, decreases down the group with increasing atomic size. However,
amongst the heavier elements, the difference is not that much pronounced.
Physical Properties:
All the elements of this group are polyatomic. Dinitrogen is a diatomic gas while all others are solids.
Metallic character increases down the group. Nitrogen andphosphorus arenonmetals, arsenic and antimony
metalloids and bismuth is a metal. This is due to decrease in ionisation enthalpy and increase in atomic
size. The boiling points , in general , increase fromtop to bottom in the group but the melting point increases
upto arsenic and then decreases upto bismuth. Except nitrogen , all the elements show allotropy.
Table : 1
ATOMIC ANDPHYSICAL PROPERTIES
Element N P As Sb Bi
Atomic Number 7 15 33 51 83
Atomic Mass 14.01 30.97 74.92 121.76 208.98
Electronic configuration [He] 2s
2
2p
3
[Ne] 3s
2
3p
3
[Ar] 3d
10
4s
2
4p
3
[Kr] 4d
10
5s
2
5p
3
[Xe] 4f
14
5d
10
6s
2
6p
3
Covalent Radius / pm 70 110 120 140 150
Ionic Radius / pm
a = M
3
, b = M
+3
171
a
212
a
222
a
76
b
103
b
I 1402 1012 947 834 703
II 2856 1903 1798 1595 1610
III 4577 2910 2736 2443 2466
Electronegativity 3.0 2.1 2.0 1.9 1.9
Ionization enthalpy
/ (kJ mol
1
)
"manishkumarphysics.in"
2
CHEMISTRY
Chemical Properties :
Oxidation States and trends in a chemical reactivity :
The common oxidation states of these elements are 3, +3 and +5. The tendency to exhibit 3 oxidation
state decreases down the group , bismuth hardly forms any compound in 3 oxidation state. The stability of
+5 oxidation state decreases down the group. The only well characterised Bi (V) compound is BiF
5
.The
stability of +5 oxidation state decreases and that of +3 state increases (due to inert pair effect) down the
group.
Bi
3+
> Sb
3+
> As
3+
; Bi
5+
< Sb
5+
< As
5+
Nitrogen exhibits +1, +2, +4 oxidation states also when it reacts with oxygen. Phosphorus also shows +1
and +4 oxidation states in some oxoacids.
In the case of nitrogen, all oxidation states from +1 to +4 tend to disproportionate in acid solution.
For example, 3 HNO
2
HNO
3
+ H
2
O + 2 NO
Similarly, in case of phosphorus nearly all intermediate oxidation states disproportionate into +5 and 3 both
in alkali and acid. However +3 oxidation state in case of arsenic , antimony and bismuth become increasingly
stable with respect to disproportionation.
Nitrogen is restricted to a maximum covalency of 4 since only four (one s and three p) orbitals are available
for bonding. The heavier elements have vacant dorbitals in the outermost shell which canbe used for bonding
(covalency) and hence , expand their covalence as in PF
6
.
Anomalous properties of nitrogen :
Nitrogen differs fromthe rest of the members of this group due to its smaller size , high electronegativity, high
ionisation enthalpy and nonavailability of d orbitals. Nitrogen has unique ability to form ptpt multiple
bonds with itself and with other elements having small size and high electronegativity (e.g., C, O). Heavier
elements of this group do not form ptpt bonds as their atomic orbitals are so large and diffuse that they
cannot have effective overlapping. Thus, nitrogen exists as a diatomic molecule with a triple bond (one s and
two p) between the two atoms. Consequently , its bond enthalpy (941.1 kJ mol
1
) is very high. On the
contrary, phosphorus, arsenic and antimony form metallic bonds in elemental state. However, the single
NNbond is weaker than the single PPbond because of high interelectronic repulsion of the nonbonding
electrons, owing to the small bond length. As a result the catenation tendency is weaker in nitrogen. Another
factor which affects the chemistry of nitrogen is the absence of d orbitals in its valence shell. Besides
restricting its covalency to four , nitrogen cannot formdtpt bonds as the heavier elements can e.g., R
3
P=O
or R
3
P=CH
2
(R = alkyl group). Phosphorus and arsenic can form dtpt bond also with transition metals
when their compounds like P(C
2
H
5
)
3
andAs(C
6
H
5
)
3
act as ligands.
(i) Reactivity towards hydrogen :
All the elements of Group 15 form hydrides of the type EH
3
where E=N, P, As, Sb or Bi. Some of the
properties of these hydrides are shown in Table. The hydrides showregular gradation in their properties. The
stability of hydrides decreases fromNH
3
to BiH
3
which can be observed fromtheir bond dissociation enthalpy.
Consequently , the reducing character of the hydrides increases. Ammonia is only a mild reducing agent
while BiH
3
is the strongest reducing agent amongst all the hydrides. Basicity also decreases in the order
NH
3
> PH
3
> AsH
3
> SbH
3
> BiH
3
.
Table : 2
PROPERTIES OF HYDRIDES OF GROUP 15ELEMENTS
Property NH
3
PH
3
AsH
3
SbH
3
BiH
3
Melting point / K 195.2 139.5 156.7 185
Boiling point / K 238.5 185.5 210.6 254.6 290
(E H) Distance / pm 101.7 141.9 151.9 170.7
HEH angle (
0
) 107.8 93.6 91.8 91.3
A
f
H
/ kJ mol
1
46.1 13.4 66.4 145.1 278
A
diss
H
(E H) / kJ mol
1
389 322 297 255
(ii) Reactivity towards oxygen :
All these elements form two types of oxides : E
2
O
3
and E
2
O
5
. The oxide in the higher oxidation state of the
element is more acidic than that of lower oxidation state. Their acidic character decreases down the group.
The oxides of the type E
2
O
3
of nitrogen and phosphorus are purely acidic , that of arsenic and antimony
amphoteric and those of bismuth is predominantly basic.
"manishkumarphysics.in"
3
CHEMISTRY
(iii) Reactivity towards halogens :
These elements react to formtwo series of halides : EX
3
and EX
5
. Nitrogen does not form pentahalide due
to non availability of the d-orbitals in its valence shell. Pentahalides are more covalent than trihalides. All
the trihalides of these elements except those of nitrogen are stable. In case of nitrogen, only NF
3
is known to
be stable. Trihalides except BiF
3
are predominantly covalent in nature. Halides are hydrolysed in water
forming oxyacids or oxychlorides.
PCl
3
+ H
2
O H
3
PO
3
+ HCl
SbCl
3
+ H
2
O SbOCl + (orange) + 2HCl
BiCl
3
+ H
2
O BiOCl + (white) + 2HCl
(iv) Reactivity towards metals :
These elements react with metals to form their binary compounds exhibiting 3 oxidation state , such as ,
Ca
3
N
2
(calciumnitride) Ca
3
P
2
(calciumphosphide) , Na
3
As
2
(sodiumarsenide), Zn
3
Sb
2
(zinc antimonide) and
Mg
3
Bi
2
(magnesium bismuthide).
Example-1 Arrange the following in the increasing order of the properties stated against them.
(a) (i) NH
3
, (ii) PH
3
, (iii) AsH
3
, (iv) SbH
3
- boiling point.
(b) (i) Bi
3+
, (ii) Sb
3+
, (iii) As
3+
- stability of +3 oxidation state.
(c) (i) NH
3
, (ii) PH
3
, (iii) AsH
3
, (iv) SbH
3
, (v) BiH
3
- reducing character.
Solution (a) ) PH
3
< AsH
3
< NH
3
< SbH
3
- boiling point.
NH
3
has higher boiling point due to H-bonding. In rest of the hydrides the boiling point increases
down the group with increasing atomic number on account of the increasing magnitude of van der
Waals attraction.
van der Waal attraction molecular weight.
(b) Bi
3+
< Sb
3+
< As
3+
- stability of +3 oxidation state decreases down the group due to inert pair
effect.
(c) NH
3
< PH
3
< AsH
3
< SbH
3
< BiH
3
- reducing character increases down the group as bond
dissociation energy decreases.
NITROGEN (N) :
Dinitrogen comprises 78%of the earth atmosphere but it is not a very abundant element in the earths crust.
Nitrates are all very soluble in water so they are not wide spread in the earths crust. NaNO
3
is found together
with small amounts of KNO
3
, CaSO
4
and NaIO
3
along the coast of southern Chile under a thin layer of sand
or soil. Nitrates are difficult to reduce under the laboratory conditions but microbes do it easily. Ammonia
forms large number of complexes with transitionmetal ions. Nitrogen is an important and essential constituent
of proteins and amino acids. Nitrates and other nitrogen compounds are extensively used in fertilizers and
explosive.
PREPARATION :
(i) Laboratory method of preparation : NH
4
Cl(aq) + NaNO
2
(aq) N
2
(g) + H
2
O() + NaCl
(aq)
N
2
is collected by the downward displacement of water.
This reaction takes place in two steps as given below :
NH
4
Cl + NaNO
2
A
NH
4
NO
2
+ NaCl ; NH
4
NO
2
A
N
2
| + 2H
2
O.
(ii) By heating ammonium dichromate : (NH
4
)
2
Cr
2
O
7
A
N
2
| + 4H
2
O+ Cr
2
O
3
(iii) By oxidation of ammonia :
(A) At lower temperature
(a) 8NH
3
() + 3Cl
2
(g) 6NH
4
Cl + N
2
|
If excess of Cl
2
is used in this reaction, nitrogen trichloride is formed as per the following
reaction, NH
3
+ 3Cl
2
NCl
3
+ 3HCl
Nitrogen trichloride is an explosive substance.
(b) By reaction of ammonia with calcium hypochlorite or Br
2
4NH
3
+ 3Ca(OCI)
2
3CaCl
2
+ N
2
+ H
2
O
"manishkumarphysics.in"
4
CHEMISTRY
(B) At higher temperature
By passing ammonia over heated cupric oxide or PbO :
2NH
3
+ 3CuO N
2
| + 3Cu + 3H
2
O
(iv) By heating urea with a nitrite in presence of dilute H
2
SO
4
:
NH
2
CONH
2
+ 2NaNO
2
+ H
2
SO
4
A
Na
2
SO
4
+ 2N
2
| + 3H
2
O + CO
2
|
(v) By passing HNO
3
vapours on red hot copper:
5Cu + 2HNO
3
5CuO + N
2
| + H
2
O
(vi) Very pure nitrogen ; Ba(N
3
)
2
A
Ba + 3N
2
Sodium azide also gives N
2
on heating.
2NaN
3
C 300
3N
2
+ 2Na
INDUSTRIAL METHODS OF PREPARATION :
(i) From liquified air by fractional distillation : The boiling point of N
2
is 196
o
Cand that of oxygen is 183
o
Cand
hence they can be separated by distillation using fractional column.
(ii) Fromproducer gas fromfurnaces : Producer gas is a mixture of COand N
2
. When the mixture of COand N
2
is passed over heated CuO, the COgas is oxidized to CO
2
which is absorbed in alkalies &N
2
remains which
is collected in gas cylinders.
PROPERTIES :
(i) N
2
is a colourless, odourless gas insoluble in water. It is neither combustible nor a supporter of combustion.
(ii) It is absorbed by heated Mg andAl. The nitrides formed thus react with water to form NH
3
.
3Mg + N
2
Mg
3
N
2
; Mg
3
N
2
+ 6H
2
O 3Mg(OH)
3
+ 2NH
3
|
2Al + N
2
2AlN ; 2AlN + 6H
2
O 2Al(OH)
3
+ 2NH
3
|
(iii) Reaction with H
2
: At 200 atm and 500
o
C, and in the presence of iron catalyst and molybdenum promoter, N
2
combines with H
2
reversibly to form ammonia. The process is called Habers Process and is the industrial
method of manufacturing ammonia. The reaction is exothermic.
N
2
+ 3H
2
2NH
3
(iv) Reaction with oxygen: When air free from CO
2
and moisture is passed over an electric arc at about 2000 K,
nitric oxide is formed. This reaction is endothermic.
N
2
+ O
2
2NO
(v) ReactionwithCaC
2
and BaC
2
: At 1100
o
C, thesecarbides react withN
2
formingCaCN
2
andBa(CN)
2
respectively.
CaC
2
+ N
2
A
CaCN
2
+ C (nitrolim, a fertilizer) ; BaC
2
+ N
2
A
Ba(CN)
2
CaCN
2
reacts with H
2
O in the soil to produce NH
3
gas. NH
3
gas is converted into nitrates by the nitrating
bacteria present in soil. (The nitrates are readily absorbed by the plants and meet their requirement of the
element nitrogen.)
USES :
1. For providing an inert atmosphere during many industrial processes where presence of air or O
2
is to be
avoided.
2. For manufacture of NH
3
by the Habers process.
3. For manufacture of HNO
3
by the Birkeland-Eyde process.
4. For manufacture of nitrolim.
Example-2 Howyou will obtain nitrogen from the following ? (Write only chemical reactions)
(a) Passing NH
3
over red-hot copper (II) oxide.
(b) Passing NH
3
into suspension of bleaching powder.
Solution (a) 3CuO + 2NH
3
3Cu + N
2
+ 3H
2
O
(b) 3CaOCl
2
+ 2NH
3
3CaCl
2
+ 3H
2
O+ N
2
"manishkumarphysics.in"
5
CHEMISTRY
COMPOUNDS OF NITROGEN :
AMMONIA:
PREPARATION :
(i) By the action of any base or alkali on any ammonium salt :
NH
4
NO
3
+ NaOH
A
NH
3
| + NaNO
3
+ H
2
O; (NH
4
)
2
SO
4
+ CaO
A
2NH
3
| + CaSO
4
+ H
2
O
This is a general method and is used as a test for ammonium salts.
(ii) By the hydrolysis of metal nitrides like AlN or Mg
3
N
2
.
AlN + NaOH + H
2
O NaAlO
2
+ NH
3
(iii) From oxides of nitrogen: When oxides of nitrogen are mixed with H
2
and the mixture is passed over heated
platinum catalyst, NH
3
gas is evolved.
2NO + 5H
2
2NH
3
| + 2H
2
O ; 2NO
2
+ 7H
2
2NH
3
| + 4H
2
O
(iv) From organic amides: When an organic amide is heated with NaOHsolution ammonia is evolved.
CH
3
CONH
2
+ NaOH
A
CH
3
COONa +NH
3
|
(v) Fromnitrates and nitrites: When a metal nitrate or nitrite is heated with zinc powder and concentrated NaOH
solution ammonia is obtained. The reactions are
NaNO
3
+ 7NaOH+ 4Zn 4Na
2
ZnO
2
+ NH
3
| + 2H
2
O
NaNO
2
+ 3Zn + 5NaOH 3Na
2
ZnO
2
+ H
2
O+ NH
3
|
Thus a nitrite or a nitrate can be identified by this reaction but this test cannot make distinction between
them.
The ammonia evolved is passed through quick lime to dry it and collected by the downward
displacement of air. Ammonia cannot be dried using CaCl
2
, P
2
O
5
or concentrated H
2
SO
4
because
NH
3
reacts with all of these.
CaCl
2
+ 8NH
3
CaCl
2
8NH
3
; P
2
O
5
+ 6NH
3
+ 3H
2
O 2(NH
4
)
3
PO
4
H
2
SO
4
+2NH
3
(NH
4
)
2
SO
4
; CaO+ H
2
O Ca(OH)
2
Ammonia is present in small quantities in air and soil where it is formed by the decay of nitrogenous
organic matter e.g., urea.
NH
2
CONH
2
+ 2H
2
O (NH
4
)
2
CO
3
2NH
3
+ H
2
O+ CO
2
INDUSTRIAL METHODS OF PREPARATION :
(i) Habers process : N
2
+ 3H
2
3 2 2
200 500
O Al & O K oxide Iron
. atm , C
+
2NH
3
(ii) Fromdestructive distillation of coal : When coal is heated at a high temperature in an iron retort and the
distillate is bubbles in water, three substances are obtained :
(a) Tarry black pitch, (b) Liquor ammonia & (c) Coal gas
The liquor ammonia is a concentrated solution of ammonia and ammonium salts. When heated it gives out
ammonia. When all the free NH
3
is obtained, the residual liquid is heated with Ca(OH)
2
when ammonium
salts get decomposed to liberate further quantity of ammonia.
(iii) Cyanamide process :
CaO+ 2C + N
2
C 2000
CaCN
2
+ CO| ; CaCN
2
+ 3H
2
O CaCO
3
+ 2NH
3
|
Physical properties :
Ammonia is a colourless gas with a pungent odour. Its freezing point and boiling point are 198.4 and 239.7 K
respectively. In the solid and liquid states , it is associated through hydrogen bonds as inthe case of water and
that accounts for its higher melting and boiling points than expected on the basis of its molecular mass.
Ammonia gas is highly soluble in water. Its aqueous solution is weakly basic due to the formation of OH
ions.
NH
3
(g) + H
2
O () NH
4
+
(aq) + OH
(aq)
Chemical properties :
(i) It forms ammoniumsalts withacids, e.g., NH
4
Cl, (NH
4
)
2
SO
4
etc. As a weak base, it precipitates the hydroxides
of many metals from their salt solutions. For example ,
2 FeCl
3
(aq) + 3 NH
4
OH (aq) Fe
2
O
3
. xH
2
O (s) + 3 NH
4
Cl (aq)
(brown ppt)
ZnSO
4
(aq) + 2 NH
4
OH(aq) Zn(OH)
2
(s) + (NH
4
)
2
SO
4
(aq)
(white ppt)
"manishkumarphysics.in"
6
CHEMISTRY
White precipitate is soluble in excess of ammonia solution forming [Zn(NH
3
)
4
]
2+
, soluble complex.
NiCl
2
(aq.) + 2NH
4
OH(aq.) Ni(OH)
2
+ (green) + 2NH
4
Cl
CrCl
3
(aq.) + 3NH
4
OH(aq.) Cr(OH)
3
+ (green) +3NH
4
Cl
CoCl
2
(aq.) + 2NH
4
OH(aq.) Co(OH)
2
+ (pink) + 2NH
4
Cl
Cr(OH)
2
(precipitate) is partially soluble in excess ammonia whereas
Ni(OH)
2
(precipitate), Co(OH)
2
(precipitate) are soluble in excess of ammonia forming soluble complex.
(ii) The presence of lone pair of electrons on the nitrogen atoms of the ammonia molecule makes it a Lewis
base. It donates the electrons pair and forms linkage with metal ions and the formation of such complex
compounds finds applications in detection of metal ions such as Cu
2+
, Ag
+
; Cd
2+
:
Cu
2+
(aq) + 4 NH
3
(aq) [Cu(NH
3
)
4
]
2+
(aq)
(blue) (deep blue)
Ag
+
(aq) + Cl
CO
3
2
or SO
4
2
) then ammonia is evolved.
NH
4
Cl
A
NH
3
+ HCl ; (NH
4
)
2
SO
4
A
2NH
3
+ H
2
SO
4
If the anion is more oxidising (e.g. NO
2
, , ClO , NO
4
3
Cr
2
O
7
2
) then
+
4
NH is oxidised to N
2
or N
2
O.
NH
4
NO
2
A
N
2
+ 2H
2
O ; NH
4
NO
3
A
N
2
O+ 2H
2
O
2NH
3
+ 2KMnO
4
medium
Neutral
2KOH + 2MnO
2
+ N
2
+ 2H
2
O
Ammonia is oxidised by sodium hypochlorite in dilute aqueous solution :
NH
3
+ NaOCl NH
2
Cl + NaOH(fast)
2NH
3
+ NH
2
Cl NH
2
NH
2
+ NH
4
Cl (slow)
(Rasching process for manufacture of hydrazine)
Asmall quantity or all the product may be destroyed by the side reaction given below.
N
2
H
4
+
e min Chlora
2
Cl NH 2 N
2
+ 2NH
4
Cl
"manishkumarphysics.in"
7
CHEMISTRY
This reaction is catalysed by heavy metal ions present in solution. For this distilled water is used (rather than
tap water) and glue or gelatin is added to mask (i.e. complex with) the remaining metal ions. The use of
excess of ammonia reduces the incidence of chloramine reacting with hydrazine. The use of a dilute solution
of the reactant is necessary to minimize another side reaction.
3NH
2
Cl + 2NH
3
N
2
+ 3NH
4
Cl
USES :
1. Used as a refrigeration fluid.
2. For the production of ammoniumfertilizers such as ammoniumsulphate, ammonium phosphate, ammonium
nitrate, urea etc.
3. For removing grease because NH
4
OHdissolves grease.
4. For manufacture of HNO
3
by the Ostwald process.
5. As a laboratory reagent.
6. In the production of artificial rayon, silk, nylon etc.
Example-3 (A) Colourless salt + NaOH
A
(B) gas + (C) alkaline solution
(C) + Zn (dust)
Warm
gas (B) ; (A)
A
triatomic both
) E ( liquid ) D ( gas +
Gas (B) gives white fumes with HCl. Identify (A) to (E) and write the chemical reactions involved.
Solution NH
4
NO
3
+ NaOH
A
NH
3
+ NaNO
3
+ H
2
O; NH
3
+ HCl NH
4
Cl (white fumes)
NaNO
3
+ 7NaOH+ 4Zn 4Na
2
ZnO
2
+ NH
3
| + 2H
2
O
NH
4
NO
3
A
N
2
O+ 2H
2
O
So, (A) = NH
4
NO
3
, (B) = NH
3
, (C) = NaNO
3
, (D) = N
2
O and (E) = H
2
O.
OXIDES OF NITROGEN :
Nitrogen forms a number of oxides, N
2
O, NO, N
2
O
3
, NO
2
or N
2
O
4
and N
2
O
5
, and also very unstable NO
3
and
N
2
O
6
. All these oxides of nitrogen exhibit pt-pt multiple bonding between nitrogen and oxygen.
Table : 3
"manishkumarphysics.in"
8
CHEMISTRY
PREPARATION :
(i) N
2
Ois obtained generally by heating NH
4
NO
3
under controled condition.
NH
4
NO
3
N
2
O+ 2H
2
O; 2NO + H
2
SO
3
N
2
O + H
2
SO
4
(ii) NOis best prepared by the reduction of 8 MHNO
3
with reducing agents like Cu or by reduction of nitrous acid
or nitrites by Fe
2+
or I
ions.
3Cu + 8HNO
3
3Cu(NO
3
)
2
+ 2NO+ 4H
2
O
2NaNO
2
+ 2FeSO
4
+ 3H
2
SO
4
2NaHSO
4
+ Fe
2
(SO
4
)
3
+ 2NO + 2H
2
O
2HNO
2
+ 2I
+ 2H
+
2NO + I
2
+ 2H
2
O
2KNO
2
() + KNO
3
() + Cr
2
O
3
(s) 2K
2
CrO
4
(s, ) + 4NO
(iii) N
2
O
3
is obtained as an intense blue liquid or a pale blue solid on cooling an equimolar mixture of NOand NO
2
to 250 K.
NO + NO
2
N
2
O
3
On warming, its colour fades due to its dissociation into these two oxides.
Also obtained by reaction NO with appropriate amount of O
2
.
4NO + O
2
2N
2
O
3
(iv) NO
2
can be prepared by reduction of concentrated HNO
3
with Cu or by heating heavy metal nitrates.
Cu + 4HNO
3
Cu(NO
3
)
2
+ 2NO
2
+ 2H
2
O;
2Pb(NO
3
)
2
K 673
2PbO+ 4NO
2
+ O
2
(Laboratory method)
(v) N
2
O
5
is an anhydride of HNO
3
. It is best prepared by dehydrating HNO
3
by P
4
O
10
at low temperatures.
4HNO
3
+ P
4
O
10
K 250
2N
2
O
5
+ 4HPO
3
2NO
2
+ O
3
N
2
O
5
+ O
2
PROPERTIES :
N
2
O: (a) Reduction : Cu(hot) + N
2
O CuO + N
2
(b) Oxidation : 2KMnO
4
+ 3H
2
SO
4
+ 5N
2
O K
2
SO
4
+ 2MnSO
4
+ 3H
2
O + 10NO
(c) Supporter of combustion : Mg + N
2
O MgO + N
2
(d) N
2
O+ 2NaNH
2
NaN
3
+ NH
3
+ NaOH
Does not formH
2
N
2
O
2
with water or hyponitrites with alkali. It is used as a propellant for whipped ice
cream and as anaesthertic by dentists.
NO: (a) Supporter of combustion : S + 2NO SO
2
+ N
2
(b) Oxidising properties (reduction of NO) :
5H
2
+ 2NO
black Pt
2NH
3
+ 2H
2
O
SO
2
+ H
2
O + 2NO H
2
SO
4
+ N
2
O
H
2
S + 2NO H
2
O + N
2
O + S
(c) Reducing properties (oxidation of NO) :
2NO+ X
2
2NOX (X = Cl or Br)
6KMnO
4
+ 9H
2
SO
4
+ 10NO 3K
2
SO
4
+ 6MnSO
4
+ 4H
2
O + 10HNO
3
(d) Readily forms coordination complexes with transition metal ions.
(e) NO is thermodynamically unstable.
3NO
C 50 30
pressure high
N
2
O + NO
2
N
2
O
3
: (a) It is anhydride of HNO
2
:
2HNO
2
N
2
O
3
+ H
2
O
(b) N
2
O
3
+ KOH 2KNO
2
+ H
2
O
(c) With concentrated acids, it form nitrosyl salts
N
2
O
3
+ 2HClO
4
2NO[CIO
4
] + H
2
O
(d) N
2
O
3
+ 2H
2
SO
4
2NO[HSO
4
] + H
2
O
"manishkumarphysics.in"
9
CHEMISTRY
NO
2
: (a) N
2
O
4
is mixed anhydride of HNO
3
and HNO
2
(b) NO
2
-N
2
O
4
system is a strong oxidising agent.
2NO
2
+ F
2
2NO
2
F (nitryl fluoride)
2NO
2
+ Cl
2
2NO
2
Cl
2NO
2
+ 4HCl 2NOCl + Cl
2
+ H
2
O
2NO
2
+ H
2
O
2
2HNO
3
NO
2
+ CO CO
2
+ NO
C + NO
2
CO
2
+ N
2
(c) Liquid N
2
O
4
is useful as a solvent for preparing anhydrous metal nitrates and also nitro complexes.
Til
4
+ 4N
2
O
4
Ti(NO
3
)
4
+ 4NO + 2I
2
ZnCl
2
+ 2N
2
O
4
Zn(NO
3
)
2
+ 2NOCl
(d) As reducing agent : SO
2
+ H
2
O + NO
2
H
2
SO
4
+ NO
N
2
O
5
: (a) It is anhydride of HNO
3
(b) 2N
2
O
5
A
2N
2
O
4
+ O
2
(c) N
2
O
5
+ 2NaOH 2NaNO
3
+ H
2
O
(d) N
2
O
5
+ I
2
10 NO
2
+ I
2
O
5
(e) N
2
O
5
+ Na NaNO
3
+ NO
2
(f) N
2
O
5
+ NaCl NaNO
3
+ NO
2
Cl
(g) N
2
O
5
+ 3H
2
SO
4
H
3
O
+
+ 2NO
2
+
+ 3HSO
4
ions:
2KMnO
4
+ 5KNO
2
+ 6HCl 2MnCl
2
+ 5KNO
3
+ 3H
2
O + 2KCl
NITRIC ACID (HNO
3
) :
PREPARATION :
(i) In the laboratory, nitric acid is prepared by heating KNO
3
or NaNO
3
and concentrated H
2
SO
4
in a glass retort.
NaNO
3
+ H
2
SO
4
NaHSO
4
+ HNO
3
(ii) On a large scale it is prepared mainly by Ostwalds process.
This method is based upon catalytic oxidation of NH
3
by atmospheric oxygen.
4 NH
3
(g) + 5 O
2
(g) (from air) 4 NO (g) + 6 H
2
O (g)
Nitric oxide thus formed combines with oxygen giving NO
2
.
2 NO (g) + O
2
(g) 2 NO
2
(g)
Nitrogen dioxide so formed, dissolves in water to give HNO
3
.
3 NO
2
(g) + H
2
O () 2 HNO
3
(aq) + NO (g)
NOthus formed is recycled and the aqueous HNO
3
can be concentrated by distillation upto ~ 68%by mass.
Further concentration to 98%can be achieved by dehydration with concentrated H
2
SO
4
.
"manishkumarphysics.in"
10
CHEMISTRY
PROPERTIES :
Physical properties :
It is a colourless liquid. Freezing point is 231.4 K and boiling point is 355.6 K. Laboratory grade nitric acid
contains ~ 68% of the HNO
3
by mass and has a specific gravity of 1.504.
In the gaseous state, HNO
3
exists as a planar molecule.
In aqueous solution, nitric acid behaves as a strong acid giving hydronium and nitrate ions.
HNO
3
(aq) + H
2
O () H
3
O
+
(aq) + NO
3
(aq)
(i) Concentrated nitric acid is a strong oxidising agent and attacks most metals except noble metals such as
gold and platinum. The products of oxidation depend upon the concentration of the acid , temperature and
the nature of the material undergoing oxidation.
Some metals (e.g., Cr , Al) do not dissolve in concentrated nitric acid because of the formation of a passive
film of oxide on the surface.
Table : 4
Reactions of Elements (Metals/Metalloids with HNO
3
)
(ii) Concentrated nitric acid also oxidises nonmetals and their compounds. Iodine is oxidised to iodic acid ,
carbon to carbon dioxide , sulphur to H
2
SO
4
and phosphorus to phosphoric acid.
I
2
+ 10 HNO
3
2 HIO
3
+ 10 NO
2
+ 4 H
2
O
C + 4 HNO
3
CO
2
+ 2 H
2
O + 4 NO
2
S
8
+ 48 HNO
3
(concentrated) 8 H
2
SO
4
+ 48 NO
2
+ 16 H
2
O
P
4
+ 20 HNO
3
(concentrated) 4 H
3
PO
4
+ 20 NO
2
+ 4 H
2
O
Brown Ring Test :
The familiar brown ring test for nitrates depends on the ability of Fe
2+
to reduce nitrates to nitric oxide, which
reacts with Fe
2+
to form a brown coloured complex. The test is usually carried out by adding dilute ferrous
sulphate solution to an aqueous solution containing nitrate ion , and then carefully adding concentrated
sulphuric acid along the sides of the test tube. A brown ring at the interface between the solution and
sulphuric acid layers indicate the presence of nitrate ion in solution.
NO
3
+ 3 Fe
2+
+ 4H
+
NO + 3Fe
3+
+ 2 H
2
O
[Fe (H
2
O)
6
]
2+
+ NO [Fe (H
2
O)
5
(NO)]
2+
+ H
2
O
"manishkumarphysics.in"
11
CHEMISTRY
USES :
The major use of nitric acid is in the manufacture of ammoniumnitrate for fertilizers and other nitrates for use
in explosives and pyrotechnics. It is also used for the preparation of nitroglycerin, trinitrotoluene and other
organic nitro compounds. Other major uses are in the pickling of stainless steel, etching of metals and as an
oxidiser in rocket fuels.
Example-4 NH
3
+ O
2
Pt
(A)
(A) + O
2
(B) (brown fumes).
(B) + H
2
O (C) (nitrogen in lower oxidation state) + (D) (nitrogen in higher oxidation state)
(C) and (D) both are oxoacids of nitrogen.
(C) + I
+ 2H
+
I
2
(violets vapours) + 2NO + 2H
2
O.
So, (A) = NO, (B) = NO
2
, (C) = HNO
2
, (D) = HNO
3
and (E) = I
2
.
Example-5 Why NH
3
gas cannot be dried by passing over P
2
O
5
, CaCl
2
and H
2
SO
4
?
Solution CaCl
2
+ 8NH
3
CaCl
2
.8NH
3
P
2
O
5
+ 6NH
3
+ 3H
2
O 2(NH
4
)
3
PO
4
H
2
SO
4
+2NH
3
(NH
4
)
2
SO
4
So it is dried by passing over quick lime (CaO).
CaO+ H
2
O Ca(OH)
2
PHOSPHORUS :
It occurs in nature in the form of stable phosphates. (Animal bones also contain calcium phosphate (58 %)).
The important minerals are:
(i) Phosphorite, Ca
3
(PO
4
)
2
(ii) Chloraptite, Ca
3
(PO
4
)
2
CaCl
2
(iii) Fluoraptite, Ca
3
(PO
4
)
2
CaF
2
(iv) Vivianite, Fe
3
(PO
4
)
2
8H
2
O (v) Redonda phosphate, AlPO
4
ALLOTROPIC FORMS OF PHOSPHORUS :
(i) White or yellow phosphorus (P
4
) :
PREPARATION :
2Ca
3
(PO
4
)
2
(from bone-ash) + 10C + 6SiO
2
A
6CaSiO
3
+ 10CO + P
4
(s) (electric furnace method)
PROPERTIES :
It is white-to-transparent and soft waxy solid. It is soluble in CS
2
but insoluble in water. It glows in dark due
to slowoxidation producing yellowish-green light. This phenomenon is called phosphorescence
P
4
+ 5O
2
P
4
O
10
Whitephosphorus is poisonous. It undergoes oxidationinthepresenceof air whichslowlyraises its temperature
and due to its low ignition temperature (~ 30C) after a few moments it catches fire spontaneously. Due to
this reason, it is stored under water.
It exist as tetrahedral P
4
molecule and tetrahedral structure remains in the liquid and gaseous states.
P
4
> C 800
Begins to dissociate in to P
2
molecules.
P
P
P
6
0
C
P
2.21
P
4
+ 3CuSO
4
+ 6H
2
O Cu
3
P
2
+ 2H
3
PO
3
+ 3H
2
SO
4
Cu
3
P
2
+ 5CuSO
4
+ 8H
2
O 8Cu + 5H
2
SO
4
+ 2H
3
PO
4
Colloidal solution of gold may be prepared by reducing a solution of gold chloride with phosphorus
dissolved in ether.
"manishkumarphysics.in"
12
CHEMISTRY
(ii) Red phosphorus:
PREPARATION :
When white phosphorus is heated in theatmosphere of CO
2
or coal gas at 573 Kred phosphorus is produced.
This red phosphorus may still contain some white phosphorus which is removed by boiling the mixture with
NaOHwhere white phosphorus is converted into PH
3
gas but red phosphorus remains inert.
P
4
+ 3NaOH + 3H
2
O
PH
3
(g) + 3NaH
2
PO
2
It is also prepared by heating white phosphorus with a fewcrystals of iodine catalyst at 250
o
Cfor a fewhours
in a closed iron vessel fitted with a safety valve.
PROPERTIES :
It is a reddish-violet crystalline solid. It is stable in air and does not
ignite unless it is heated to 400C. It is less reactive than white
phosphorus and does not dissolvein liquid CS
2
. This is a polymeric
substance forming linear chains like this.
(iii) Black phosphorus has two forms o-black phosphorus and |-black phosphorous, o-black phosphorus is
formed when red phosphorus is heated in a sealed tube at 803 K. It can be sublimed in air and has opaque
monoclinic or rhombohedral crystal. It does not oxidise in air, |-black phosphorus is prepared by heating
white phosphorus at 473 K under high pressure. It does not burn in air upto 673 K.
|-black phosphorus is agoodconductor of electricity whereas o-black phosphorous is non-conductor. |-black
phosphorus has layered structure like graphite. The distance between the two layers is found to be 3.68 .
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P P
Density : White phosphorus= 1.83 ; Red phosphorus = 2.20 ; Black phosphorus = 2.70 gm/cc ;
As polymerisation increases compactness increases and therefore, density increases.
CHEMICAL PROPERTIES OF PHOSPHORUS :
Reactivity of the various allotropic forms of phosphorus towards other substances decreases in the order:
white > red > black, the last one being almost inert i.e. most stable.
Apart from their reactivity difference, all the forms are chemically similar.
(i) White phosphorus burns in air to form phosphorus trioxide and pentoxide.
P
4
+ 3O
2
P
4
O
6
(limited supply of air) ; P
4
+ 5O
2
P
4
O
10
(excess of air)
Red and other forms of phosphorus also burn in air or oxygen but on heating.
(ii) When heated with non-metals phosphorus forms compounds.
P
4
+ 10S
P
4
S
10
(iii) Alkali metals when heated with white phosphorus in vacuum produce alkali metal phosphide, which react
with water to form phosphine gas.
3M + P
A
M
3
P ; M
3
P + 3H
2
O
A
3MOH + PH
3
| { where M = Na, K etc.}
(iv) When white phosphorus is heated with CaOand water phosphine gas is evolved.
3CaO + 8P + 9H
2
O
3Ca(H
2
PO
2
)
2
+ 2PH
3
(v) When heated with concentrated HNO
3
, phosphorus is oxidized to H
3
PO
4
.
P + 5NHO
3
H
3
PO
4
+ 5NO
2
| + H
2
O
(vi) When heated with concentrated H
2
SO
4,
phosphorus is oxidized to H
3
PO
4
.
2P + 5H
2
SO
4
A
2H
3
PO
4
+ 5SO
2
| + 2H
2
O
"manishkumarphysics.in"
13
CHEMISTRY
Example-6 Explain the high reactivity of white phosphorus as compared to red phosphorus.
Solution The high reactivity of white phosphorus is due to an unusual
bonding that produces considerable strain in the P
4
molecule. The P
4
molecule exists as a discrete molecule
whereas the red phosphorus is a polymeric substance in
which the tetrahedral, P
4
units are held by covalent bonds
as shown in the following structure.
COMPOUNDS OF PHOSPHORUS :
PHOSPHINE :
PREPARATION :
(i) Phosphine is prepared by the reaction of calcium phosphide with water.
Ca
3
P
2
+ 6 H
2
O
3 Ca(OH)
2
+ 2 PH
3
(ii) In the laboratory, it is prepared by heating white phosphorus with concentrated NaOH solution in an inert
atmosphere of CO
2
.
P
4
+ 3 NaOH + 3 H
2
O
PH
3
+ 3 NaH
2
PO
2
(sodium hypophosphite)
When pure, it is non inflammable but becomes inflammable owing to the presence of P
2
H
4
or P
4
vapours. To
purify it from the impurities , it is absorbed in HI to form phosphonium iodide (PH
4
I) which on treating with
KOHgives off phosphine.
PH
4
I + KOH
KI + H
2
O+ PH
3
(iii) It is prepared by hydrolysis of metal phosphides with acids.
2Na
3
P + 3H
2
SO
4
3Na
2
SO
4
+ 2PH
3
|
; Ca
3
P
2
+ 6HCl
3CaCl
2
+ 2PH
3
(iv) HPO
3
2
+ 3Zn + 8H
+
PH
3
| + 3Zn
2+
+ 3H
2
O
Sample of PH
3
can be dried using quicklime or NaOH sticks.
PROPERTIES :
(i) It is a colourless gas with a slightly garlic or rotten fish smell and is highly poisonous. It explodes in contact
with traces of oxidising agents like HNO
3
, Cl
2
and Br
2
vapours.
(ii) It is slightly soluble in water but soluble in CS
2
and other organic solvents. The solution of PH
3
in water
decomposes in presence of light giving red phosphorus and H
2
.
(iii) When absorbed in copper sulphate or mercuric chloride, the corresponding phosphides are obtained.
3CuSO
4
+ 2PH
3
Cu
3
P
2
+
+ 3H
2
SO
4
Cu
2+
+ PH
3
+ 4H
2
O H
3
PO
4
+ 4Cu + + 8H
+
3HgCl
2
+ 2 PH
3
Hg
3
P
2
+ (brownish black) + 6 HCl
With silver nitrate,
3AgNO
3
+ PH
3
Ag
3
P+ (yellow) + 3HNO
3
. Ag
3
P
Later on decomposes to black Ag.
Ag
3
P +AgNO
3
+ 3H
2
O 3Ag+ (black) + 3HNO
3
+ H
3
PO
3
(iv) Phosphine on heating at 150Cburns forming H
3
PO
4
PH
3
+ 2O
2
H
3
PO
4
(v) Phosphine is weakly basic and like ammonia, gives phosphonium compounds with acids e.g.,
PH
3
+ HBr PH
4
Br
Phosphoniumcompounds are obtained when anhydrous phosphine reacts with anhydrous halogen
acids (not in aqueous solution).
USES :
The spontaneous combustion of phosphine is technically used in Holmes signals. Containers containing
calcium carbide and calciumphosphide are pierced and thrown in the sea when the gases evolved burn and
serve as a signal.
It is also used in the production of smoke screens. Calciumphosphide reacts with water producingphosphine
which burns in air to give clouds of phosphorus pentaoxide and that acts as smoke screens.
"manishkumarphysics.in"
14
CHEMISTRY
OXIDES OF PHOSPHORUS :
PHOSPHORUS TRIOXIDE (P
2
O
3
) :
It is dimeric and has formula P
4
O
6
PREPARATION :
It is prepared by burning phosphorus in a limited supply of oxygen when gaseous P
4
O
10
and P
4
O
6
are formed.
On lowering the temperature using a condenser, P
4
O
6
remains in gaseous formwhereas P
4
O
10
condenses as
a solid which is stopped by glass wool. On passing the remaining gaseous mixture through freezing mixture,
it converts into colourless crystals of P
4
O
6
.
P
4
+ 3O
2
P
4
O
6
PROPERTIES :
(i) It is colourless crystalline solid having melting point 23.8
o
C and boiling point 178
o
C.
(ii) It dissolves in cold water to form phosphorus acid. It is thus the anhydride of phosphorus acid.
P
4
O
6
+ 6H
2
O
4H
3
PO
3
(iii) It dissolves in hot water liberating PH
3
P
4
O
6
+ 6H
2
O
3H
3
PO
4
+ PH
3
(iv) It slowly gets oxidized in air to form P
4
O
10
P
4
O
6
+ 2O
2
P
4
O
10
(v) It burns in Cl
2
gas forming phosphorus oxytrichloride (POCl
3
) and phosphoryl chloride (PO
2
Cl)
P
4
O
6
+ 4Cl
2
2POCl
3
+ 2PO
2
Cl
PHOSPHORUS PENTAOXIDE (P
4
O
10
) :
It is dimeric and has the formula P
4
O
10
.
PREPARATION :
It is obtained by burning phosphorus in excess air.
P
4
+ 5O
2
P
4
O
10
PROPERTIES:
(i) It is a white powder ,acidic in nature and is the anhydride of orthophosphoric acid.
(ii) It sublimes on heating at 250
o
C.
(iii) It dissolves in water with hissing sound forming metaphosphoric acid and finally orthophosphoric acid.
P
4
O
10
+ 2H
2
O
4HPO
3
; 4HPO
3
+ 2H
2
O
2H
4
P
2
O
7
; 2H
4
P
2
O
7
+ 2H
2
O
4H
3
PO
4
(iv) It dehydrates concentrated H
2
SO
4
and concentrated HNO
3
to SO
3
and N
2
O
5
respectively.
4HNO
3
+ P
4
O
10
on distillati
4HPO
3
+ 2N
2
O
5
; 2H
2
SO
4
+ P
4
O
10
on distillati
4HPO
3
+ 2SO
3
2CH
3
CONH
2
+ P
4
O
10
4HPO
3
+ 2CH
3
CN; 4CH
3
COOH+ P
4
O
10
4HPO
3
+2(CH
3
CO)
2
O
(v) It reacts with alcohols and ethers forming phosphate esters.
P
4
O
10
+ 6EtOH
OEt
|
OH P O 2
|
OH
= +
OEt
|
OH P O 2
|
OEt
=
P
4
O
10
+ 6Et
2
O
OEt
|
OEt P O 4
|
OEt
=
"manishkumarphysics.in"
15
CHEMISTRY
USES:
1. For drying acidic gases.
2. As a dehydrating agent
3. For the preparation of SO
3
and N
2
O
5
.
4. For the preparation of phosphoric acid.
Example-7 What happens ?
(a) When phosphine is heated at 150C .
(b) When phosphine is dissolved in water in presence of light.
Solution (a) Phosphine on heating at 150Cburns forming H
3
PO
4
PH
3
+ 2O
2
H
3
PO
4
(b) The solution of PH
3
in water decomposes in presence of light giving red phosphorus and H
2
.
Example-8 P
4
+ NaOH
warm
Products.
Explain the reducing character of one of the products obtained by taking the example of copper
sulphate .
Solution P
4
+ 3 NaOH + 3 H
2
O
PH
3
+ 3 NaH
2
PO
2
(sodium hypophosphite)
4Cu
2+
+ PH
3
+ 4H
2
O H
3
PO
4
+ 4Cu + + 8H
+
Sodiumhypophosphite also acts as a strong reducing agent and reduces copper sulphate to Cu
2
H
2
.
OXY ACIDS OF PHOSPHORUS :
PHOSPHORUS ACID (H
3
PO
3
) :
PREPARATION :
(i) By dissolving P
4
O
6
in water : P
4
O
6
+ 6H
2
O
4H
3
PO
3
(ii) By hydrolysis of PCl
3
with water : PCl
3
+ 3H
2
O
H
3
PO
3
+ 3HCl
The solution containing H
3
PO
3
and HCl is heated to 180
o
C and HCl gas is driven out. The resulting solution
on crystallization gives white crystals of H
3
PO
3
.
(iii) By heating hypophosphorus acid : 3H
3
PO
2
(concentrated solution)
more or 40
PH
3
+ 2H
3
PO
3
PROPERTIES :
(i) It is a white crystalline solid, soluble in water and having melting point of 74
o
C.
(ii) When neutralized with bases or alkalies, it forms neutral salts called phosphites which are unstable.
H
3
PO
3
+ NaOH
NaH
2
PO
3
+ H
2
O
NaH
2
PO
3
+ NaOH
Na
2
HPO
3
+ H
2
O
(iii) 4H
3
PO
3
A
3H
3
PO
4
+ PH
3
(disproportionation)
(iv) H
3
PO
3
+ 3PCl
5
PCl
3
+ 3POCl
3
+ 3HCl
(v) It is a strong reducing agent :
(a) Reduces AgNO
3
toAg.
HPO
3
2
+ 2Ag
+
2Ag+ (black) + H
3
PO
4
(b) Mercury (II) chloride on warming with excess of the phosphite solution gives grey metallic mercury.
HPO
3
2
+ 2HgCl
2
+ H
2
O Hg
2
Cl
2
+ (white) + 2Cl
+ H
3
PO
4
Hg
2
Cl
2
+ (white) + HPO
3
2
+ H
2
O
2Hg+ (grey) + 2Cl
+ H
3
PO
4
(c) Reduces H
2
SO
4
to SO
2
.
H
3
PO
3
+ H
2
SO
4
(concentrated)
warm
SO
2
| + H
3
PO
4
+ H
2
O
"manishkumarphysics.in"
16
CHEMISTRY
ORTHOPHOSPHORIC ACID (H
3
PO
4
) :
PREPARATION :
(i) By heating calcium phosphate with concentrated H
2
SO
4
Ca
3
(PO
4
)
2
+ 3H
2
SO
4
2CaSO
4
+ 2H
3
PO
4
CaSO
4
is insoluble. Solution of H
3
PO
4
is separated from CaSO
4
. It is then concentrated by evaporating it at
180
o
C and dehydrated by concentrated H
2
SO
4
placed in a vacuum desiccator cooled by freezing mixture.
White crystals of H
3
PO
4
are thus formed.
(ii) By hydrolysis of PCl
5
: PCl
5
+ 4H
2
O
H
3
PO
4
+ 5HCl
(iii) By heating white phosphorus with concentrated HNO
3
:
P + 5HNO
3
H
3
PO
4
+ 5NO
2
+ H
2
O
(iv) P + 5O
2
P
4
O
10
; P
4
O
10
+ 6H
2
O
4H
3
PO
4
(pure)
This is called furnace process.
PROPERTIES:
(i) Pure orthophosphoric acid is a white crystalline solid highly soluble in water having melting point of 42
o
C. It
is a weak acid. It forms two acid salts and one normal salt.
(ii) Reaction with silver nitrate :
HPO
4
2
+ 3Ag
+
Ag
3
PO
4
+ (yellow) + H
+
Ag
3
PO
4
+ (yellow) + 6NH
3
3 [Ag(NH
3
)
2
]
+1
+ PO
4
2
(iii) Neutralization with alkalies or bases :
H
3
PO
4
O H
NaOH
2
NaH
2
PO
4
(pri. phosphate)
O H
NaOH
2
Na
2
HPO
4
(sec. phosphate)
O H
NaOH
2
Na
3
PO
4
(tert. phosphate)
(iv) Action of heat :
H
3
PO
4
C 220
H
4
P
2
O
7
(pyrophosphoric acid) ; H
4
P
2
O
7
C 316
HPO
3
(metaphosphoric acid)
NaH
2
PO
4
A
NaPO
3
+ H
2
O
2Na
2
HPO
4
A
Na
4
P
2
O
7
+ H
2
O
Na(NH
4
)HPO
4
A
NaPO
3
+ NH
3
| + H
2
O
USES : It is used as a laboratory reagent and in manufacture of medicines.
Fertilizer :
(i) NH
3
+ CO
2
pressure high
C 200 100
NH
4
CONH
4
NH
2
CONH
2
+ H
2
O
(urea)
In soil, it slowly hydrolysed to ammonium carbonate.
(ii) [3(Ca
3
(PO
4
)
2
CaF
2
) + 7H
2
SO
4
phosphate Super
4 2 4 2
CaSO 7 ) PO H ( Ca 3 +
+ 2HF
(ii) [3(Ca
3
(PO
4
)
2
CaF
2
) + 14H
3
PO
4
phosphate er sup triple
2 4 2
) PO H ( Ca 10
+ 2HF
H
3
PO
4
is used to avoid the formation of the insoluble CaSO
4
(waste product).
Example-9 Write balanced equations for the reactions of H
3
PO
4
and B(OH)
3
with water. Classify each acid as
BronstedLowry acid or a Lewis acid.
Solution H
3
PO
4
(aq) + H
2
O () H
2
PO
4
(aq) + H
3
O
+
(aq.)
Since, H
3
PO
4
is proton-donor hence, H
3
PO
4
is a Bronsted-Lowry acid and H
2
O which is a proton-
acceptor is a Bronsted-Lowry base.
B(OH)
3
(aq) + 2H
2
O (l) [B(OH)
4
]
+ H
3
O
+
B(OH)
3
has electron-deficient B (octet incomplete) hence, it accepts electron-pair from H
2
O. Thus,
B(OH)
3
is a Lewis acid.
Example-10 Starting with phosphorite, Ca
3
(PO
4
)
2
, showhowyou would prepare phosphoric acid.
Solution Ca
3
(PO
4
)
2
+ 3H
2
SO
4
2CaSO
4
+ 2H
3
PO
4
.
"manishkumarphysics.in"
17
CHEMISTRY
GROUP 16 ELEMENTS : THE OXYGEN FAMILY
Oxygen, sulphur, selenium, telluriumandpoloniumconstitutegroup 16of theperiodic table. This is sometimes
known as group of chalcogens the ore forming elements because a large number of metals ores are oxides
or sulphides.
Occurrence:
Oxygen is the most abundant of all the elements on the earth. Oxygen forms about 46.6% by mass of
earths crust . Dry air contains 20.946% oxygen by volume.
However, the abundance of sulphur in the earths crust is only 0.03-0.1%. Combined sulphur exists primarily
as sulphates such as gypsum CaSO
4
.2H
2
O, epsom salt MgSO
4
.7H
2
O, baryta BaSO
4
and sulphides such
as galena PbS, zinc blende ZnS, copper pyrites CuFeS
2
. Traces of sulphur occur as hydrogen sulphide in
volcanoes.
Selenium and tellurium are also found as metal selenides and tellurides in sulphide ores. Polonium occurs
in nature as a decay product of thorium and uranium minerals.
Electronic Configuration :
The elements of group 16 have six electrons in the outermost shell and have ns
2
np
4
general valence shell
electronic configuration.
Atomic and Ionic Radii :
Due to increase in the number of shells , atomic and ionic radii increase from top to bottom in the group. The
size of oxygen atoms is however, exceptionally small.
Ionisation Enthalpy :
Ionisation enthalpy decreases down the group. It is due to increase in size. However, the element of this
grouphave lower ionisation enthalpy values compared to those of group 15 in the corresponding periods. This
is due to the fact that group 15 elements have extra stable half-filled p orbitals electronic configurations.
Electron Gain Enthalpy :
Because of the compact nature of oxygen atom, it has less negative electron gain enthalpy than sulphur.
However from sulphur onwards the value again becomes less negative upto polonium.
Electronegativity :
Next to fluorine, oxygen has the highest electronegativity value amongst the elements. Within the group,
electronegativity decrease with an increase in atomic number. This indicates that the metallic character
increases from oxygen to polonium.
Physical Properties :
Oxygen and sulphur are non-metal, seleniumand telluriummetalloids, whereas poloniumis a metal. Polonium
is radioactive and is short lived (Half-life 13.8 days). The melting and boiling points increase with an increase
in atomic number down the group. The larger difference between the melting and boiling points of oxygen and
sulphur may be explained on the basis of their atomicity; oxygen exist as diatomic molecules (O
2
) whereas
sulphur exists as polyatomic molecule (S
8
).
Catenation :
Tendency for catenation decreases down the group. This property is prominently displayed by sulphur (S
8
).
The SS bond is important in biological system and is found in some proteins and enzymes such as
cysteine.
Selenium has unique property of photo conductivity and is used in photocopying machines and also a
decolouriser of glass.
"manishkumarphysics.in"
18
CHEMISTRY
Table : 5
ATOMIC ANDPHYSICAL PROPERTIES
Element O S Se Te
Atomic Number 8 16 34 52
Atomic Mass 16 32.06 78.96 127.6
Electronic configuration [He] 2s
2
2p
4
[Ne] 3s
2
3p
4
[Ar] 3d
10
4s
2
4p
4
[Kr] 4d
10
5s
2
5p
4
Covalent Radius / pm 74 103 119 142
Ionic Radius X
2
/ pm 140 184 198 221
I
1314 1000 941 869
II
3388 2251 2045 1790
Electronegativity 3.5 2.44 2.48 2.01
Density/[g cm
3
(293 K)] 1.32 2.06 4.19 6.25
Melting point / K 54 393 490 725
Boiling point / K 90 718 958 1260
Ionization enthalpy / (kJ mol
1
)
Chemical Properties :
Oxidation states and trends in chemical reactivity :
The elements of group 16 exhibit a number of oxidation states. The stability of -2 oxidation state decreases
down the group. Polonium hardly shows -2 oxidation states. Since electronegativity of oxygen is very high,
it shows only negative oxidation states as -2 except in the case of OF
2
where its oxidation states is + 2.
Other elements of the group exhibit + 2, + 4, + 6 oxidation states but + 4 and + 6 are more common. Sulphur,
selenium and tellurium usually show + 4 oxidation in their compounds with oxygen and +6 oxidations state
with fluorine. The stability of +6 oxidation state decreases down the group and stability of + 4 oxidation state
increases (inert pair effect). Bonding in + 4 and + 6 oxidation states are primarily covalent.
HNO
3
oxidises sulphur to H
2
SO
4
(S + VI) but only oxidises selenium to H
2
SeO
3
(Se + IV) as the atoms are
smaller and there is poor shielding of 3d electrons as a result the electrons are held more tightly with
nucleus.
Polonium shows metallic properties since it dissolves in H
2
SO
4
, HF, HCl and HNO
3
forming pink solution of
Po
II
. However Po
II
is strongly radio active and the o-emission decomposes the water and the Po
II
is quickly
oxidised to yellow solution of Po
IV
.
Anomalous behaviour of oxygen :
The anomalous behaviour of oxygen, like other member of p-block present in second period is due to its
small size and high electronegativity. One typical example of effects of small size and high electronegativity
is the presence of strong hydrogen bonding in H
2
O which is not found in H
2
S.
The absence of d orbitals in oxygen limits its covalency to four and in practice, rarely increases beyond two.
On the other hand, in case of other elements of the group, the valence shell can be expanded and covalence
exceeds four.
(i) Reactivity with hydrogen : All the elements of group 16 form hydrides of the type H
2
E (E = S, Se, Te, Po).
Some properties of hydrides are given in Table. Their acidic character increases from H
2
O to H
2
Te. The
increase in acidic character can be understood in terms of decrease in bond (H-E) dissociation enthalpy
down the group. Owing to the decrease in bond (H-E) dissociation enthalpy down the group , the thermal
stability of hydrides also decreases from H
2
O to H
2
Po. All the hydrides except water possess reducing
property and this property increases from H
2
S to H
2
Te.
"manishkumarphysics.in"
19
CHEMISTRY
Table : 6
PROPERTIES OF HYDRIDES OF GROUP 16ELEMENTS
Property H
2
O H
2
S H
2
Se H
2
Te
m.p./K 273 188 208 222
b.p./K 373 213 232 269
H-E distance/pm 96 134 146 169
HEH angle () 104 92 91 90
A
f
H/kJ mol
-1
-286 -20 73 100
A
diss
H (H-E)/kJ mol
-1
463 347 276 238
Dissociation constant
a
1.8 10
-16
1.3 10
-7
1.3 10
-4
2.3 10
-3
(ii) Reactivity with oxygen : All these elements form oxides of the EO
2
and EO
3
types where E = S, Se, Te or
Po. Ozone (O
3
) and sulphur dioxide (SO
2
) are gases while selenium dioxide (SeO
2
) is solid. Reducing
property of dioxide decreases from SO
2
to TeO
2
; SO
2
is reducing while TeO
2
is an oxidising agent. Besides
EO
2
type sulphur, selenium and tellurium also form EO
3
type oxides (SO
3
, SeO
3
, TeO
3
). Both types of oxides
are acidic in nature.
(iii) Reactivity toward the halogens : Elements of group 16 form a larger number of halides of the type EX
6
,
EX
4
and EX
2
where E is an element of the group 16 and X is an halogen. The stabilities of the halides
decrease in the order F > Cl > Br > l. Amongst hexahalides, hexafluorides are the only stable halides. All
hexafluorides are gaseous in nature. Theyhave octahedral structure. Sulphur hexafluorideSF
6
is exceptionally
stable for steric reasons.
Amongst tetrafluorides, SF
4
is a gas , SeF
4
liquid and TeF
4
a solid These fluorides have sp
3
d hybridisation
and thus, have trigonal bipyramidal structure in which one of the equatorial position is occupied by a lone pair
of electrons. This geometry is also regarded as see - saw geometry.
All elements except seleniumformdichlorides and dibromides. Thesedihalides are formedbysp
3
hybridisation
and thus have tetrahedral structure. The well known monohalides are dimeric in nature, Examples are
S
2
F
2
, S
2
Cl
2
, S
2
Br
2
, Se
2
Cl
2
and Se
2
Br
2
. These dimeric halides undergo disproportionation as given below:
2Se
2
Cl
2
SeCl
4
+ 3Se.
Example-11 Identify the group 16(VI A) element that fits each of the following description is :
(a) the most electronegative
(b) semimetal
(c) radioactive
(d) the most abundant element in the earths crust.
Solution (a) Oxygen (b) Tellurium (c) Polonium (d) Oxygen
Example-12 Give the names and formulae of the compounds in which sulphur exhibits an oxidation state of :
(A) 2 (B) + 4 (C) + 6
Solution (A) H
2
S
2
(B) S
4+
O
2
(C) S
+6
O
3
DIOXYGEN (O
2
) :
It differs from the remaining elements of the VI
th
group because of the following properties.
(A) small size (B) high electronegativity and (C) non-availability of d-orbitals.
PREPARATION :
(i) By thermal decomposition of oxides of metals.
2 HgO
C 450
0
2 Hg + O
2
; 2 Ag
2
O
C 350
0
4 Ag + O
2
3 MnO
2
A
Mn
3
O
4
+ O
2
; 2 Pb
3
O
4
A
6 PbO + O
2
"manishkumarphysics.in"
20
CHEMISTRY
(ii) By thermal decomposition of oxygen rich compounds.
KClO
3
A
2 KCl + 3O
2
(laboratory method)
4 K
2
Cr
2
O
7
A
4 K
2
CrO
4
+ 2 Cr
2
O
3
+ 3O
2
; 2 KMnO
4
A
K
2
MnO
4
+ MnO
2
+ O
2
(iii) By the action of concentrated H
2
SO
4
on MnO
2
.
2 MnO
2
+ 2H
2
SO
4
2 MnSO
4
+ 2H
2
O + O
2
(iv) By the action of water on Na
2
O
2
.
2 Na
2
O
2
+ 2 H
2
O 4 NaOH + O
2
(v) By the action of concentrated H
2
SO
4
on KMnO
4
or K
2
Cr
2
O
7
.
4 KMnO
4
+ 6 H
2
SO
4
2 K
2
SO
4
+ 4MnSO
4
+ 6H
2
O + 5O
2
2 K
2
Cr
2
O
7
+ 8H
2
SO
4
2 K
2
SO
4
+ 2Cr
2
(SO
4
)
3
+ 8H
2
O + 3O
2
(vi) By Catalytic decomposition of hypochlorites :
2 HOCl
+ 2
Co
2HCl + O
2
(vii) By Brins process (mfg.) :
2 BaO + O
2
(air)
C 500
0
2BaO
2
; 2 BaO
2
C 800
0
2 BaO + O
2
(viii) From air (mfg.) : Oxygen is obtained by liquefaction of air and then its fractional distillation.
PROPERTIES:
Colourless , odourless and tasteless gas. It is paramagnetic and exhibits allotropy. Three isotopes of oxygen
are O
16
8
, O
17
8
and O
18
8
. Oxygen does not burn but is a strong supporter of combustion.
USE :
1. Oxygen mixed with helium or CO
2
is used for artificial respiration.
2. Liquid oxygen is used as oxidising agent in rocket fuels.
3. Oxygen is used for production of oxy-hydrogen or oxy-acetylene flames employed for cutting and welding.
4. Pure dioxygen is used to convert pig iron into steel in the basic oxygen process which are kaldo and LD
process.
OXIDES :
(i) Acidic oxides :
The covalent oxides of non-metal are usually acidic; dissolves in water to produce solutions of acids e.g.,
CO
2
, SO
2
, SO
3
, N
2
O
5
, N
2
O
3
, P
4
O
6
, P
4
O
10
, Cl
2
O
7
, CrO
3
, Mn
2
O
7
etc. They are termed as acid anhydride.
Cl
2
O
7
+ H
2
O 2 HClO
4
; Mn
2
O
7
+ H
2
O 2 HMnO
4
(ii) Basic oxides :
Metallic oxides are generally basic oxides. They either dissolve in water to form alkalies or combine with
acids to form salts and water or combine with acidic oxides to form salts; e.g., Na
2
O, CaO. CuO, FeO, BaO
etc.
Na
2
O + H
2
O 2 NaOH ; CaO + H
2
O Ca(OH)
2
; CuO + H
2
SO
4
CuSO
4
+ H
2
O
The metallic oxides with lowest oxidation sate is the most ionic and the most basic but with increasing
oxidation sate the acidic character increases e.g., CrO is basic, Cr
2
O
3
amphoteric and CrO
3
acidic.
(iii) Neutral Oxides :
They neither combine with acids nor with the bases to form salts e.g., CO, N
2
O, NO etc.
(iv) Amphoteric Oxides :
Many metals yield oxides which combine with both strong acid as well as strong bases e.g., ZnO, Al
2
O
3
,
BeO, Sb
2
O
3
, Cr
2
O
3
, PbO, SnO, SnO
2
, GaO etc.
PbO + 2 NaOH Na
2
PbO
2
+ H
2
O ; PbO + H
2
SO
4
PbSO
4
+ H
2
O
Cr
2
O
3
+ 2 NaOH Na
2
Cr
2
O
4
+ H
2
O; Cr
2
O
3
+ 3 H
2
SO
4
Cr
2
(SO
4
)
3
+ 3 H
2
O
"manishkumarphysics.in"
21
CHEMISTRY
(v) Mixed Oxides :
They behave as mixture of two simple oxides.
e.g., Pb
3
O
4
(2PbO + PbO
2
) ; Fe
3
O
4
(FeO + Fe
2
O
3
) ; Mn
3
O
4
(2 MnO + MnO
2
)
(vi) Peroxides :
They react with dilute acids and form H
2
O
2
, e.g., Na
2
O
2
, K
2
O
2
, BaO
2
etc. They contain O
2
2
ions.
Na
2
O
2
+ H
2
SO
4
Na
2
SO
4
+ H
2
O
2
They also react with water forming O
2
.
Na
2
O
2
+ H
2
O 2NaOH+ 1/2O
2
(vii) Super Oxides :
They contain O
2
ion, e.g., KO
2
, RbO
2
and CsO
2
. These oxides react with water forming H
2
O
2
and O
2
2 KO
2
+ 2 H
2
O 2 KOH + H
2
O
2
+ O
2
.
OZONE (O
3
) :
PREPARATION :
It is prepared by passing silent electric discharge through pure and dry oxygen.
O
2
energy
O + O
O
2
+ O O
3
; AH = 2845 kJ mol
-1
3O
2
2O
3
Mixture obtained contains 5-10% ozone by volume and this mixture is called ozonised oxygen.
Higher concentration or pure O
3
can be obtained by fractional liquefaction of the mixture.
Low concentration of O
3
can be made by UV irradiation of O
2
.
O
2
quenching ) ii (
C 2500 ) i (
O
3
PROPERTIES:
(i) Dark blue gas which forms a blue liquid on cooling and on solidification forms violet black crystals. The colour
is due to intense absorption of red light. It also absorbs strongly in the UV region. Thus it protects the people
on the earth from the harmful UV radiation from the sun. It has sharp smell often associated with sparking
electrical equipment. It is toxic and is slightly soluble in water but more in turpentine oil, glacial acetic acid
or CCl
4
. O
3
molecule is diamagnetic but O
3
is paramagnetic.
(ii) Oxidising agent : O
3
+ 2H
+
+ 2e
O
2
+ H
2
O ; SRP = + 2.07 v (in acidic medium)
O
3
+ H
2
O + 2e
O
2
+ 2OH
to I
2
(from neutral solution of KI)
O
3
O
2
+ [O]
Alkaline KI is oxidised to potassium iodate & periodate.
KI + 3O
3
KIO
3
+ 3O
2
; KI + 4O
3
KIO
4
+ 4O
2
Similarly S
2
to SO
4
2
(but not H
2
S), NO
2
to NO
3
, SO
3
2
to SO
4
2
,
AsO
3
3
to AsO
4
3
, Sn
2+
to Sn
4
+(acidic medium).
O
3
O
2
+ [O]
2 K
2
MnO
4
+ [O] + H
2
O 2 KMnO
4
+ 2KOH
2 K
2
MnO
4
+ O
3
+ H
2
O 2 KMnO
4
+ 2KOH + O
2
Similarly [Fe(CN)
6
]
4
oxidises to [Fe(CN)
6
]
3
(basic medium).
2NO
2
+ O
3
N
2
O
5
+ O
2
"manishkumarphysics.in"
22
CHEMISTRY
(b) It oxidises moist S, P, As into their oxy acids.
O
3
O
2
+ [O] 3
S + 3 [O] SO
3
(c) It oxidises H
2
S to S.
H
2
S + O
3
H
2
O + S + (yellow)
(iii) Reaction with dry I
2
: 2 I
2
+ 9[O
3
] I
4
O
9
+ 9O
2
I
4
O
9
yellowsolid has the composition I
+3
(IO
3
)
3
. Formation of this compound is a direct evidence in favour of
basic nature of I
2
(i.e. its tendency to form cations).
(iv) Reaction with moist iodine :
O
3
O
2
+ [O] 5
I
2
+ 5[O] I
2
O
5
(v) Reaction with Silver :
Silver articles become black in contact with ozone.
Ag + O
3
Ag
2
O
+
(black) + O
2
(vi) Reaction with H
2
O
2
:
2e
+ 2H
+
+ O
3
O
2
+ H
2
O
It is supported by the fact that SRP of ozone is higher (+2.07) than SRP of hydrogen peroxide (+1.77).
Therefore , ozone is stronger oxidising agent than hydrogen peroxide.
(vii) Bleaching Action :
O
3
also bleaches coloured substances through oxidation.
(viii) Ozonolysis :
Alkenes, alkynes react with ozone forming ozonides.
CH
2
= CH
2
+ O
3
O
CH
2
CH
2
O O
ZnO
O H Zn
2
+
2HCHO
(ix) Reaction with KOH :
Forms orange coloured compound, potassiumozonide.
2 KOH + 5O
3
+
3
O K 2 + 5O
2
+ H
2
O
(orange solid)
TESTS FOR OZONE
(i) A filter paper soaked in a alcoholic benzidine becomes brown when brought in
contact with O
3
(this is not shown by H
2
O
2
)
(ii) Tailing of mercury
Pure mercury is a mobile liquid but when brought in contact with O
3
its mobility decreases and it starts
sticking to glass surface forming a type of tail due to the dissolution of Hg
2
O (mercury sub-oxide) in Hg.
2 Hg + O
3
Hg
2
O + O
2
"manishkumarphysics.in"
23
CHEMISTRY
USES :
1. As a germicide and disinfectant for sterilising water and improving the atmosphere of crowded places.
2. For detecting the position of double bond in the unsaturated organic compounds.
3. In mfg. of artificial silk, synthetic camphor, KMnO
4
etc.
4. It is also used for bleaching oil, ivory, flour starch etc.
Example-13 O
3
is a powerful oxidising agent. Write equation to represent oxidation of
(a) I
to I
2
in acidic solutions,
(b) sulphur to sulphuric acid in the presence of moisture,
Solution (a) O
3
+ 2I
+ 2H
+
O
2
+ I
2
+ H
2
O
(b) 3O
3
+ S + H
2
O H
2
SO
4
+ 3O
2
.
HYDROGEN PEROXIDE (H
2
O
2
) :
PREPARATION :
(i) Laboratory method:
BaO
2
. 8H
2
O+ H
2
SO
4
(cold) BaSO
4
+
(white) + H
2
O
2
+ 8H
2
O
BaSO
4
is filtered to get aqueous hydrogen peroxide.
The reaction between anhydrous BaO
2
and H
2
SO
4
is slow and practically ceases after sometimes
due to the formation of a protective layer of BaSO
4
on BaO
2
. So hydrated barium peroxide is used.
Ba(OH)
2
+ H
2
O
2
+ 6H
2
O BaO
2
. 8H
2
O
Since H
2
SO
4
can decompose H
2
O
2
at a higher temperature, therefore, the reaction should be carried
out at low temperature or H
3
PO
4
can be used in place of H
2
SO
4
3BaO
2
+ 2H
3
PO
4
Ba
3
(PO
4
)
2
+
+ 3H
2
O
2
; Ba
3
(PO
4
)
2
+3H
2
SO
4
3BaSO
4
+
+2H
3
PO
4
H
3
PO
4
can again be used.
(ii) By electrolysis of concentrated H
2
SO
4
or (NH
4
)
2
SO
4
at a high current density to formperoxosulphates, which
then hydrolysed.
H
2
SO
4
H
+
at anode : 2HSO
4
O
S
2
O
8
2-
+ 2H
+
+ 2e
; at cathode : H
+
+ e
2
1
H
2
H
2
S
2
O
8
+ H
2
O
on distillati
C 90 80
H
2
SO
5
+ H
2
SO
4
; H
2
SO
5
+ H
2
O H
2
SO
4
+ H
2
O
2
(iii) Industrial method (Auto oxidation) :
OH
OH
C H
2 5
(Oxidation)
(air) O
2
H (Ni)
2
(Reduction)
O
O
C H
2 5
+ H O
2 2
2- Ethyl anthraquinol 2-Ehtylanthraquinone
K
2
S
2
O
8
(s) + 2D
2
O 2KDSO
4
(aq) + D
2
O
2
() (laboratory method of preparation)
From molar solution of sodium peroxoborate (NaBO
3
. 4H
2
O) by hydrolysis :
BO
3
+ H
2
O H
2
O
2
+ BO
2
PROPERTIES :
(i) Colourless viscous liquid which appears blue in the larger quantity and is soluble in water (due to H- bonding)
in all proportions and form a hydrate H
2
O
2
.H
2
O(melting point 221 K).
(ii) Its boiling point 423K is more than water but freezing point (4C ) is less than water. Density and dielectric
constant are also higher than H
2
O
"manishkumarphysics.in"
24
CHEMISTRY
(iii) Its aqueous solution is more stable than the anhydrous liquid where it decomposes into water and O
2
slowly
on exposure to light.
2H
2
O
2
2H
2
O+ O
2
H
2
O
2
is not kept in glass containers because traces of alkali metal ions from the glass can catalyse
the explosive decomposition of H
2
O
2
Therefore, aqueous solution is stored in plastic or wax-lined glass
containers and some urea or phosphoric acid or glycerol is added to that solution because these compounds
have been found to behave as negative catalyst for the decomposition of H
2
O
2
(iv) Acidic nature : Behaves as a weak acid according to the following equation
H
2
O
2
(aq) H
+
+ HO
2
-
; K
a
= 1.5 10
-12
at 25
0
C
Aqueous solution of H
2
O
2
turns blue litmus red which is then bleached by the oxidising property of H
2
O
2
Na
2
CO
3
+ H
2
O
2
Na
2
O
2
+ H
2
O+ CO
2
Ba(OH)
2
+ H
2
O
2
+ 6H
2
O BaO
2
. 8H
2
O
+
A 30% H
2
O
2
solution has pH = 4.0
(v) Oxidising Agent :
2e
+ 2H
+
+ H
2
O
2
2H
2
O ; SRP = + 1.77 v (in acidic medium)
2e
+ H
2
O
2
2OH
-
; SRP = + 0.87 v (in alkaline medium)
On the basis of the above potentials, we can say that H
2
O
2
is strong oxidising agent in acidic
medium but kinetically it is found that reactions are faster in basic medium.
(A) In acidic medium :
(a) It oxidises PbS to PbSO
4
.
H
2
O
2
H
2
O + [O] 4
PbS + 4[O] PbSO
4
PbS + 4H
2
O
2
PbSO
4
+ 4H
2
O
This property is utilised in restoring the white colour in old paintings which turns black due
to the formation of PbS by the action of atmospheric H
2
S.
(b) H
2
O
2
oxidises H
2
S to sulphur.
H
2
O
2
H
2
O + [O]
H
2
S + [O] H
2
O + S+
H
2
O
2
+ H
2
S 2H
2
O + S+
Potassium iodide and starch produces deeper blue colour with acidified H
2
O
2
.
H
2
O
2
+ 2H
+
2I
I
3
+ 2H
2
O
H
2
O
2
in acidic medium also oxidises
AsO
3
3-
to AsO
4
3-
, SO
3
2-
to SO
4
2-
, KI to I
2
, S
2-
to SO
4
2-
,
FeSO
4
to Fe
2
(SO
4
)
3
and [Fe(CN)
6
]
4-
to[Fe(CN)
6
]
3-
(c) NH
2
- NH
2
(hydrazine) + 2H
2
O
2
N
2
+ 4H
2
O
(d) + H
2
O
2
4
FeSO
+ H
2
O
(B) In alkaline medium :
(a) Cr(OH)
3
(s) + 4 NaOH + 3H
2
O
2
2Na
2
CrO
4
(aq.) + 8H
2
O
or
10 OH
+ 3 H
2
O
2
+ 2 Cr
3+
2 CrO
4
2
+ 8H
2
O
(b) 2NaBO
2
+ 2H
2
O
2
+ 6H
2
O Na
2
[(OH)
2
B(O-O)
2
B(OH)
2
] 6H
2
O(sodiumper oxoborate)
Used as a brightener in washing powder.
"manishkumarphysics.in"
25
CHEMISTRY
(vi) Reducing Agent : It acts as a reducing agent towards powerful oxidising agent.
H
2
O
2
O
2
+ 2H
+
+ 2e
+ H
2
O
2
O
2
+ 2H
2
O + 2e
(a) Ag
2
O is reduced to Ag.
Ag
2
O + H
2
O
2
2Ag + H
2
O
2
+ O
2
(b) It reduces O
3
to O
2
..
H
2
O
2
+ O
3
H
2
O + 2O
2
(c) It reduces ferric cyanide to ferrous cyanide (basic medium).
2 K
3
[Fe(CN)
6
] + 2KOH K
4
[Fe(CN)
6
] + H
2
O + O
H
2
O
2
+ O H
2
O + O
2
2K
3
[Fe(CN)
6
] + 2KOH + H
2
O
2
2K
4
[Fe(CN)
6
] + 2H
2
O + O
2
(d) It reduces gold chloride solution to finely divided metallic gold which appears greenish-blue by
transmitted light and brown by reflected light.
2 Au
3+
+ 3H
2
O
2
2Au+ + 6H
+
+ 3O
2
It also reduces MnO
4
-
to Mn
2+
(acidic medium), MnO
4
to MnO
2
(basic medium),
OCl
to Cl
, IO
4
to IO
3
and Cl
2
to Cl
TESTS FOR H
2
O
2
:
(i) With K
2
Cr
2
O
7
: Cr
2
O
7
2-
+ 2H
+
+ 4H
2
O
2
alcohol amyl
2CrO
5
+ 5H
2
O
CrO
5
bright blue coloured compound soluble in diethyl ether, amyl alcohol and amyl acetate.
CrO
5
+ H
2
SO
4
2Cr
2
(SO
4
)
3
+ 6H
2
O+ 7O
2
(ii) 2 HCHO + H
2
O
2
pyrogallol
OH
2 HCOOH + H
2
When this reaction is carried out in dark, it is accompanied by emission of light (yellow coloured). It is an
example of chemiluminescence.
(iii) An acidified solution of titanium salt gives yellow or orange colour with H
2
O
2
.
Ti
+4
+ H
2
O
2
+ 2H
2
O H
2
TiO
4
(yellow/orange red) + 4H
+
Orange red coloured in slightly acid solution and yellow colour with very dilute solution.
USES :
1. In bleaching of delicate materials such as silk, wool, cotton, ivory etc.
2. As a valuable antiseptic and germicide for washing wounds, teeth and ears under the name perhydrol.
3. As antichlor to remove traces of chlorine and hypochlorite.
4. As oxidising agent in rocket fuels.
Example-14 Give the important applications of O
3
.
Solution (A) As a germicide and disinfectant for sterilising water and improving the atmosphere of crowded
places.
(B) For detecting the position of double bond in the unsaturated organic compounds.
(C) In mfg. of artificial silk, synthetic camphor, KMnO
4
etc. It is also used for bleaching oil, ivory,
flour starch etc.
SULPHUR (S) :
Allotropic Forms Of Sulphur :
Sulphur forms numerous allotropes of which the yellowrhombic (o- sulphur) and monoclinic (| - sulphur)
forms are the most important. The stable forms at roomtemperature is rhombic sulphur, which transforms to
monoclinic sulphur when heated above 369 K.
"manishkumarphysics.in"
26
CHEMISTRY
Rhombic sulphur (o - sulphur) :
This allotrope is yellowin colour , melting point 385.8 K and specific gravity 2.06. Rhombic sulphur crystals
are formed on evaporating the solution of roll sulphur in CS
2
. It is insoluble in water but dissolved to some
extent in benzene, alcohol and ether. It is readily soluble in CS
2
.
Monoclinic sulphur (| - sulphur) :
Its melting point is 393 K and specific gravity 1.98. It is soluble in CS
2
. This form of sulphur is prepared by
melting rhombic sulphur in a dish and cooling till crust is formed. Two holes are made in the crust and the
remaining liquid poured out. On removing the crust, colourless needle shaped crystals of | - sulphur are
formed. It is stable above 369 K and transforms into o - sulphur below it . Conversely, o - sulphur is stable
below369 Kand transforms into | - sulphur above this. At 369 Kboth the forms are stable. This temperature
is called transition temperature.
Both rhombic and monoclinic sulphur have S
8
molecules these S
8
molecules are packed to give different
crystal structures. TheS
8
ring inboth theforms is puckeredandhas acrown shape. The molecular dimensions
are given in figure.
S
S
S
S
S S
S
S
107
o
2
0
4
p
m
(a)
S
S
S
S
S
S
S
205.7 pm
102.2
o
(b)
Fig. : The structures of (a) S
8
ring in rhombic sulphur and (b) S
6
form
Several other modifications of sulphur containing 6-20 sulphur atoms per ring have been synthesised in the
last two decades. In cyclo- S
6
, the ring adopts the chair form and the molecular dimension are as shown in
fig. (b).
Plastic Sulphur : It is formed when molten sulphur () is poured into cold water. It consists of chain like
molecule and has rubber like properties when formed. On standing it becomes brittle and finally converts to
rhombic sulphur.
Sulphur melts to form a mobile liquid. As the temperature is raised the colour darkens. At 160C C
8
rings
break, and the diradicals so formed polymerize, forming long chains of up to a million atoms. The viscosity
increases sharply, and continues to rise up to 200C. At higher temperatures chains break, and shorter
chains and rings are formed, which makes the viscosity decrease upto 444C, the boiling point. The vapour
at 200C consists mostly of S
8
rings, but contains 1-2%of S
2
molecules. At elevated temperature (~1000 K),
S
2
is the dominant species and is paramagnetic like O
2
, and presumably has similar bonding. S
2
gas is
stable upto 2200C.
The sulphur is mined using a process called as Frasch process.
From hydrocarbons contaminated with H
2
S or a stream of gas containing H
2
S. It involves two steps :
(i) H
2
S + O
2
Burn
SO
2
+ H
2
S(ii) H
2
S + SO
2
C 300 to 200
converter catalyst
3S(g + 2H
2
O(g)
COMPOUNDS OF SULPHUR :
HYDROGEN SULPHIDE (H
2
S) :
PREPARATION :
(i) FeS + H
2
SO
4
FeSO
4
+ H
2
S
It is prepared in kipps apparatus
(ii) Preparation of pure H
2
Sgas
Sb
2
S
3
(pure) + 6 HCl (pure) 2 SbCl
3
+ 3 H
2
S
(iii) By hydrolysis of thio-acetamide
CH
3
CSNH
2
+ 2H
2
O + H
+
CH
3
COOH + NH
4
+
+ H
2
S
"manishkumarphysics.in"
27
CHEMISTRY
PROPERTIES :
(i) Colourless gas with rotten egg smell .
(ii) Moderately soluble in water but solubility decreases with increasing temperature.
(iii) Reducing Agent :
Acts as a strong reducing agent as it decomposes evolving hydrogen.
(a) H
2
S + X
2
2 HX + S;
(b) H
2
S + SO
2
moisture
H
2
O + S;
(c) H
2
O
2
+ H
2
S H
2
O + S + O
2
(d) 2HNO
3
H
2
O + 2NO
2
+ [O]
H S + [O] H O + S
2 2
2HNO + H S 2H O + NO + S
3 2 2 2
(e) H
2
S + 2O
3
H
2
SO
4
+ O
2
It also reduces MnO
4
to Mn
2+
, H
2
SO
4
to SO
2
& K
2
Cr
2
O
7
to Cr
3+
(acidic medium)
MnO
4
to MnO
2
(alkaline medium)
(iv) Acidic Nature :
Its aqueous solution acts as a weak dibasic acid according to following reaction.
H
2
S HS + H
+
S
2-
+ 2H
+
Therefore, It forms two series of salts as given below
NaOH + H
2
S NaHS + H
2
O ; NaOH + H
2
S Na
2
S + 2H
2
O
(v) Formation of Polysulphides :
They are obtained by passing H
2
S gas through metal hydroxides.
Ca(OH)
2
+ H
2
S CaS + 2H
2
O ; CaS + 4 H
2
S CaS
5
+ 4H
2
NH
4
OH + H
2
S (NH
4
)
2
S + 2H
2
O; (NH
4
)
2
S + H
2
S (excess) (NH
4
)
2
S
x+1
+ xH
2
yellowammonium sulphide
TESTS FOR H
2
S :
(i) Turns acidified lead acetate paper black.
(ii) Gives violet or purple colouration with alkaline sodiumnitroprusside solution (containing NaOH).
USES :
1. As a laboratory reagent for the detection of basic radicals in qualitative analysis.
2. As reducing agent.
Example-15 Black (A) + H
2
SO
4
(B) gas + (C)
(B) + (CH
3
COO)
2
Pb
(D) black ppt.
(C) + K
3
[Fe(CN)
6
]
(E) blue.
(C) also decolourises acidified KMnO
4
. Identify (A) to (E).
Solution FeS + H
2
SO
4
H
2
S + FeSO
4
.
H
2
S + (CH
3
COO)
2
Pb
PbS (black ppt.) + 2CH
3
COOH.
Fe
2+
+ K
3
[Fe(CN)
6
]
3
KFe
II
[Fe
III
(CN)
6
] Turnbulls blue.
"manishkumarphysics.in"
28
CHEMISTRY
SULPHUR DIOXIDE :
PREPARATION :
(i) S + O
2
or air
Burn
SO
2
(ii) S + 2H
2
SO
4
(concentrated)
A
3SO
2
+ 2H
2
O.
(iii) By heating Cu or Ag with concentrated H
2
SO
4
Cu + H
2
SO
4
CuSO
4
+ 2H
2
O + SO
2
(iv) By reaction of metal sulphites with dilute HCl (Laboratory method)
Na
2
SO
3
+ 2HCl 2NaCl + SO
2
+ H
2
O
Similarly bisulphites also give SO
2
with dilute HCl
NaHSO
3
+ HCl NaCl + SO
2
+ H
2
O
(v) By heating sulphides (metal sulphide ores) in excess of air.
2 ZnS + 3O
2
2ZnO + 2SO
2
(vi) CaSO
4
(gypsum) + C
C 1000
A
2 CaO + SO
2
+ CO
2
By this method SO
2
is obtained in large scale
PROPERTIES :
(i) Colourless gas with burning sulphur smell.
(ii) It is heavier than air and is highly soluble in water. SO
2
in solution is almost completely present as
SO
2
.6H
2
Oand only traces of H
2
SO
3
.
(iii) Neither burns nor helps in burning but burning magnesiumand potassiumcontinue to burn in its atmosphere.
3Mg + SO
2
2 MgO + MgS ; 4K + 3SO
2
K
2
SO
3
+ K
2
S
2
O
3
(iv) Acidic Nature : Acidic oxide and thus dissolve in water forming sulphurous acid.
SO
2
+ H
2
O H
2
SO
3
(v) Addition Reaction :
SO
2
+ Cl
2
light Sun
SO
2
Cl
2
(sulphuryl chloride)
SO
2
+ O
2
SO
3
; PbO
2
+ SO
2
PbSO
4
(vi) Reducing Nature :
It is a more powerful reducing agent in alkaline medium than in acidic medium.
H
2
O + SO
2
H
2
SO
3
; H
2
SO
3
+ H
2
O H
2
SO
4
+ 2H
Reducing character is due to the liberation of nascent hydrogen.
(a) Reduces halogens to corresponding halides.
SO
2
+ 2H
2
O H
2
SO
4
+ 2H
2H + Cl
2
2HCl
SO
2
+ 2H
2
O + Cl
2
H
2
SO
4
+ 2HCl
(b) Reduces acidified iodates to iodine
SO
2
+ 2H
2
O H
2
SO
4
+ 2H] 5
2KIO
3
+ H
2
SO
4
K
2
SO
4
+ 2HIO
3
2HIO
3
+ 10H I
2
+ 6H
2
O
2KIO
3
+ 5SO
2
+ 4H
2
O K
2
SO
4
+ 4H
2
SO
4
+ I
2
It also reduces acidified KMnO
4
Mn
2+
(decolourises),
Acidified K
2
Cr
2
O
7
Cr
3+
(green coloured solution) & Ferric Sulphate Ferrous sulphate
(vii) Oxidising nature : Acts as oxidising agent with strong reducing agent
(a) 2H
2
S + SO
2
moisture
2H
2
O + 3S
(b) 2SnCl
2
+ SO
2
+ 4HCl 2SnCl
4
+ 2H
2
O + S
(c) 2Hg
2
Cl
2
+ SO
2
+ 4HCl 2HgCl
2
+ 2H
2
O + S
(d) 2CO + SO
2
2CO
2
+ S
(e) 2 Fe + SO
2
2FeO + FeS
"manishkumarphysics.in"
29
CHEMISTRY
(viii) Bleaching Action :
SO
2
+ 2H
2
O H
2
SO
4
+ 2H
This is due to the reducing nature of SO
2
Coloured matter + H
Air oxidation
colourless matter..
Therefore, bleaching is temporary.
(ix) K
2
[HgCl
4
] + 2SO
2
+ 2H
2
O K
2
[Hg(SO
3
)
2
] + 4HCl
USES :
1. Used in manufacture of H
2
SO
4
&paper fromwood pulp.
2. As a bleaching agent for delicate articles like wool, silk and straw.
3. Used in refining of petroleum and sugar.
SULPHUR TRIOXIDE (SO
3
) :
PREPARATION :
(i) 6H
2
SO
4
+ P
4
O
10
6SO
3
+ 4H
3
PO
4
P
4
O
10
is dehydrating agent
(ii) Fe
2
(SO
4
)
3
A
Fe
2
O
3
+ 3SO
3
(iii)
2SO + O
2 2
pt
2SO
3
PROPERTIES :
(i) Acidic Nature :
Dissolves in water forming sulphuric acid
SO
3
+ H
2
O H
2
SO
4
(ii) H
2
SO
4
+ SO
3
H
2
S
2
O
7
(oleum)
(iii) SO
3
+ HCl SO
2
(OH) Cl (chlorosulphuric acid)
(iv) Oxidising Nature :
(a) 2SO
3
+ S
C 100
0
3SO
2
(b) 5SO
3
+ 2P 5SO
2
+ P
2
O
5
(c) SO
3
+ PCl
5
POCl
3
+ SO
2
+ Cl
2
(d) SO
3
+ 2HBr H
2
O + Br
2
+ SO
2
(v) SO
3
+ H
2
SO
4
+ NH
2
CONH
2
2NH
2
SO
3
+ CO
2
USES :
1. Used in manufacture of H
2
SO
4
and oleum.
2. Used as a drying agent for gases.
3. Used for the sulphonation of long chain alkyl benzene compounds (like dodeyl benzene). The sodium salt of
these alkyl benzene sulphonic acidareanionic surfaceactiveagents and aretheactiveingredient of detergent.
OXYACID OF SULPHUR
Sulphur forms a number of oxoacid such as H
2
SO
3
, H
2
S
2
O
4
, H
2
S
2
O
5
, H
2
S
2
O
6
(x = 2 to 5,) H
2
SO
4
, H
2
S
2
O
7
,
H
2
SO
8
. Some of these acids are unstable and cannot be isolated. They are known in aqueous solution or in
the forms of their salts. Structures of some important oxoacids are shown in figure.
"manishkumarphysics.in"
30
CHEMISTRY
SULPHURIC ACID (H
2
SO
4
) :
Manufacture :
Sulphuric acid is one of the most important industrial chemicals world wide.
(a) Sulphuric acid is manufactured by the contact process which involves three steps :
(i) burning of sulphur or sulphide ores in air to generate SO
2
(ii) conversion of SO
2
to SO
3
by the reaction with oxygen in the presence of a catalyst (V
2
O
5
), and
(iii) absorption of SO
2
in H
2
SO
4
to give Oleum (H
2
S
2
O
7
)
The SO
2
produced is profiled by removing dust and other impurities such as arsenic compounds.
The key step in the manufacture of H
2
SO
4
is the catalytic oxidation of SO
2
with O
2
to give SO
3
in the presence
of V
2
O
5
(catalyst).
2SO
2
(g) + O
2
(g)
5 2
O V
2SO
3
(g) D
r
H
O
= 196.6 kJ mol
1
.
The reaction is exothermic reversible and the forward reaction leads to a decrease in volume. Therefore, low
temperature and high pressure are the favourable conditions for maximumyield. But the temperature should
not be very low other wise rate of reaction will become slow.
In practice the plant is operated at a pressure of 2 bar and a temperature of 720 K. The SO
3
gas from the
catalytic converter is absorbed in concentrated H
2
SO
4
to produce oleum. Dilution of oleum with water gives
H
2
SO
4
of the desired concentration. In the industry two steps are carried out simultaneously to make the
process a continuous one and also to reduce the cost.
SO
3
+ H
2
SO
4
H
2
S
2
O
7
(Oleum)
The sulphuric acid obtained by Contact process is 96-98% pure.
(b) Lead chamber process :
2SO
2
+ O
2
(air) + 2H
2
O + [NO] (catalyst) 2H
2
SO
4
+ [NO] (catalyst).
Acid obtained is 80% pure and is known as brown oil of vitriol.
Properties :
Sulphuric acid is a colourless, dense, oily liquid with a specific gravity of 1.84 at 298 K. The acid freezes at
283 K and boils at 611 K. It dissolves in water with the evolution of a larger quantity of heat.
The chemical reaction of sulphuric acid are as a result of the following characteristics : (a) low volatility (b)
strong acidic character (c) strong affinity for water and (d) ability to act as an oxidising agent in aqueous
solution,
(i) Sulphuric acid ionises in two steps.
H
2
SO
4
(aq) + H
2
O() H
3
O
+
(aq) + HSO
4
(aq) ; Ka
1
= very larger (K
a1
> 10)
H
2
SO
4
(aq) + H
2
O() H
3
O
+
(aq) + SO
4
2
(aq) ; Ka
2
= 1.2 10
2
The larger value of K
a1
(K
a1
> 10) means that H
2
SO
4
is largely dissociated into H
+
and HSO
4
. Greater the
value of dissociation constant (K
a
) the stronger is the acid.
(a) The acid forms two series of salts : normal sulphates (such as sodiumsulphate and copper sulphate
and acid sulphate (e.g., sodium hydrogen sulphate)
(b) Decomposes carbonates and bicarbonates in to CO
2
.
Na
2
CO
3
+ H
2
SO
4
Na
2
SO
4
+ H
2
O+ CO
2
; NaHCO
3
+ H
2
SO
4
NaHSO
4
+ H
2
O+ CO
2
(c) Sulphuric acid, because of its lowvolatility can be used to manufacture more volatile acid from their
corresponding salts.
2MX + H
2
SO
4
2HX + M
2
SO
4
(X = F, Cl, NO
3
) ; NaCl + H
2
SO
4
NaHSO
4
+ HCl
(M = Metal)
KNO
3
+ H
2
SO
4
KHSO
4
+ HNO
3
(ii) Concentrated sulphuric acid is a strong dehydrating agent. Many wet gases can be dried by passing them
through sulphuric acid, provided the gases do not react with the acid. Sulphuric acid removes water from
organic compound; it is evident by its charring action on carbohydrates.
C
12
H
22
O
11
4 2
SO H
12C + 11H
2
O; H
2
C
2
O
4 O H
SO H
2
4 2
CO+ CO
2
(iii) Hot concentrated sulphuric acid is moderately strong oxidising agent. In this respect it is intermediate
between phosphoric and nitric acids. Both metals and non-metals are oxidised by concentrated sulphuric
acid, which is reduced to SO
2
.
"manishkumarphysics.in"
31
CHEMISTRY
Cu + 2H
2
SO
4
(concentrated) CuSO
4
+ 2H
2
O
3S + 2H
2
SO
4
(concentrated) 3SO
2
+ 2H
2
O
C + 2H
2
SO
4
(concentrated) CO
2
+ 2SO
2
+ 2H
2
O
H
2
SO
4
+ KBr KHSO
4
+ HBr
2HBr + H
2
SO
4
2H
2
O + Br
2
+ SO
2
(iv) With PCl
5
forms mono and di-acid chlorides.
HO SO
2
OH + PCl
5
Cl SO
2
OH + POCl
3
+ HCl
HO SO
2
OH + 2PCl
5
Cl SO
2
Cl + 2POCl
3
+ 2HCl
(v) K
4
[Fe (CN)
6
] (s) + 6H
2
SO
4
+ 6H
2
O
A
2K
2
SO
4
+ FeSO
4
+ 3(NH
4
) SO
4
+ 6CO
(vi) 3KClO
3
+ 3H
2
SO
4
2KHSO
4
+ HClO
4
+ 2ClO
2
+ H
2
O
USES :
Sulphuric acid is a very important industrial chemical. A nations industrial strength can be judged by the
quantity of sulphuric acid it produces and consumes .It is needed for the manufacture of hundreds of other
compounds alsoin manyindustrial processes .The bulk of sulphuric acid produced is used in the manufacture
of fertilisers (e.g., ammonium sulphate, superphosphate). Other uses are in : (a) petroleum refining (b)
manufacture of pigment, paints anddyestuff intermediates (c) detergent industry (d) metallurgical applications
(e.g., cleansing metal before enameling, electroplating and galvanising) (e) storage batteries (f) in the
manufacture of nitrocellulose products and (g) as a laboratory reagent.
Example-16 SO
2
and Cl
2
both are used as bleaching agent. What factors cause bleaching ?
Solution SO
2
+ 2H
2
O H
2
SO
4
+ 2H.
Cl
2
+ H
2
O 2HCl + O.
Bleaching action of SO
2
is due to H (that causes reduction) and that of Cl
2
is due to O(that causes
oxidation).
Example-17
Solution
"manishkumarphysics.in"
32
CHEMISTRY
SODIUM THIOSULPHATE (Na
2
S
2
O
3
.5H
2
O) :
PREPARATION :
(i) Na
2
SO
3
+ S Na
2
S
2
O
3
(ii) Na
2
CO
3
+ 2SO
2
+ H
2
O 2NaHSO
3
+ CO
2
; 2NaHSO
3
+ Na
2
CO
3
2Na
2
SO
3
+ H
2
O + CO
2
Na
2
SO
3
+ S
A
Na
2
S
2
O
3
(iii) 2 NaHS + 4NaHSO
3
3Na
2
S
2
O
3
+ 3H
2
O
(iv) Na
2
S + Na
2
SO
3
+ I
2
Na
2
S
2
O
3
+ 2 NaI
(v) 2Na
2
S
3
+ 3O
2
(from air)
A
2Na
2
S
2
O
3
+ 2S
(vi) 6NaOH + 4s
A
Na
2
S
2
O
3
+ 2Na
2
S + H
2
O
(vii) 2 Na
2
S + 4SO
2
+ Na
2
CO
3
3Na
2
S
2
O
3
+ CO
2
PROPERTIES:
(i) It is a colourless crystalline substance soluble in water which loses water of crystallisation on strong heating
(ii) As antichlor :
It removes the chlorine fromthe surface of fibres (while dyeing) according to following reaction.
Na
2
S
2
O
3
+ 4Cl
2
+ 5H
2
O 2NaHSO
4
+ 8HCl
Therefore , it is known as antichlor.
(iii) Reaction with HCl :
S
2
O
3
2
+ H
+
S+ (white) + SO
2
+ H
2
O (disproportionation reaction)
This test is used for distinction between S
2
O
3
2-
and SO
3
2-
ions as SO
3
2-
ions give only SO
2
with HCl.
(iv) Complex formation reactions :
(a) Reaction with silver salts (AgNO
3
, AgCl, AgBr or AgI) :
S
2
O
3
2
+ 2Ag
+
Ag
2
S
2
O
3
+ (white)
Ag
2
S
2
O
3
+ H
2
O Ag
2
S + (black) + H
2
SO
4
This hydrolytic decomposition can be accelerated by warming.
If hypo is in excess, then soluble complex is formed.
2S
2
O
3
2
+Ag
+
[Ag(S
2
O
3
)
2
]
3
(soluble complex) or [Ag(S
2
O
3
)
3
]
5
This reaction is utilized in photography where hypo is used as fixer.
(b) Reaction with FeCl
3
:
It develops a pink or dark violet colour which soon vanishes on standing according to following
reaction.
Fe
3+
+ 2S
2
O
3
2
[Fe(S
2
O
3
)
2
]
(Pink or violet)
[Fe(S
2
O
3
)
2
]
+ Fe
3+
2Fe
2+
+ S
4
O
6
2
Over all reaction is
2S
2
O
3
2
+ 2Fe
3+
2Fe
2+
+ S
4
O
6
2
(c) Reaction with AuCl
3
(Soluble in water) :
AuCl
3
+ Na
2
S
2
O
3
AuCl
+
+ Na
2
S
4
O
6
+ 2HCl
AuCl + Na
2
S
2
O
3
Na
3
[Au(S
2
O
3
)
2
] (soluble complex) + NaCl
(d) Reaction with CuCl
2
:
2 CuCl
2
+ 2Na
2
S
2
O
3
2CuCl+ + Na
2
S
4
O
6
+ 2 NaCl
CuCl + Na
2
S
2
O
3
Cu
2
S
2
O
3
+ + 2 NaCl
3 Cu
2
S
2
O
3
+ 2 Na
2
S
2
O
3
Na
4
[Cu
6
(S
2
O
3
)
5
] (soluble complex)
"manishkumarphysics.in"
33
CHEMISTRY
(v) Reaction with HgCl
2
:
Hg
2+
+ S
2
O
3
2
+ H
2
O HgS+ (black) + SO
4
2
+ 2H
+
(vi) As reducing agent :
2 KMnO
4
+ Na
2
S
2
O
3
K
2
SO
4
+ Na
2
SO
4
+ Mn
2
O
3
(vii) Reaction with potassium tri-iodite solution i.e. KI
3
I
3
+ S
2
O
3
2
3I
+ S
4
O
6
2
This reaction finds application in the iodometric and iodimetric methods of titrimetric analysis.
(viii) Reaction with [Ni(en)
3
]
2+
(NO
3
)
2
.
[ Ni(en)
3
]
2+
+ S
2
O
3
2
alkaline slightly
or neutral
[Ni(en)
3
]S
2
O
3
+ (violet)
(ix) Reaction with potassium cyanide (made alkaline with NaOH).
S
2
O
3
2
+ CN
boil
SCN
+ SO
3
2
(x) 4Na
2
S
2
O
3
.5H
2
O
) All ( O H
C 215
2
4Na
2
S
2
O
3
C 220
3Na
2
SO
4
+ Na
2
S
5
(xi) Reaction with soluble salt of lead :
S
2
O
3
2
+ Pb
2+
PbS
2
O
3
+ (white)
PbS
2
O
3
+ + H
2
O PbS+ (black) + 2H
+
+ SO
4
2
Ba
2+
gives white precipitate of BaS
2
O
3
but calcium thiosulphate is soluble.
USES :
1. As an antichlor to remove excess of chlorine from bleached fabrics.
2. In photography as fixer.
3. As a reagent in iodometric and idiometric titrations.
Example-18 Colourless salt (A) decolourises I
2
solution and gives white precipitate (changing to black) with
AgNO
3
solution. (A) also produces pink colour with FeCl
3
solution. Identify (A) and explain reactions.
Solution 2S
2
O
3
2
+ I
2
S
4
O
6
2
+ 2I
S
2
O
3
2
+ 2Ag
+
Ag
2
S
2
O
3
+ (white)
Ag
2
S
2
O
3
+ H
2
O Ag
2
S + (Black) + H
2
SO
4
Fe
3+
+ 2S
2
O
3
2
[Fe(S
2
O
3
)
2
]
(Pink or violet)
"manishkumarphysics.in"
34
CHEMISTRY
MISCELLANEOUS SOLVED EXAMPLES
1. What will happen ?
(i) When copper sulphate solution is warmed with H
3
PO
2
or H
2
PO
2
.
(ii) NaH
2
PO
2
is heated.
(iii) NaClO
4
(s) is heated.
Sol. (i) 3H
2
PO
2
+ 4Cu
2+
+ 6H
2
O 4CuH + (red) + 3H
3
PO
4
+ 5H
+
(ii) 4NaH
2
PO
2
Na
4
P
2
O
7
+ 2PH
3
| + H
2
O
(iii) NaClO
4
NaCl + 2O
2
|
2. Ammonia can not be prepared by:
(A) heating NH
4
NO
3
or (NH
4
)
2
Cr
2
O
7
(B) heating of NH
4
CI or (NH
4
)
2
CO
3
(C) heating of NaNO
3
or NaNO
2
with zinc dust or aluminium and sodium hydroxide
(D) reaction of AIN or CaCN
2
with H
2
O
Ans. (A)
Sol. Except (A) all gives ammonia
NH
4
NO
3
A
N
2
O+ 2H
2
O; (NH
4
)
2
Cr
2
O
7
N
2
+ Cr
2
O
3
+ 4H
2
O
3. What will happen if to nearly neutral yellowcoloured solution containing iron (III) chloride and some potassium
hexacyanoferrate (III) a nearly neutral solution of hydrogen peroxide is added ?
Sol. The yellow solution turns to green and prussian blue separates slowly.
2[Fe(CN)
6
]
3
+ H
2
O
2
2[Fe(CN)
6
]
4
+ 2H
+
+ O
2
4Fe
3+
+ 3[Fe(CN)
6
]
4
Fe
4
[Fe(CN)
6
]
3
+
4. Identify [A] to [C] and complete the following reactions.
O
3
+ I
2
(dry) [A] ; [H] + H
2
O [B] + [C]
Sol. [A] = I
4
O
9
; [B] = HIO
3
; [C] = I
2
3O
3
+ 2I
2
(dry) I
4
O
9
; 5I
4
O
9
+ 9H
2
O 18HIO
3
+ I
2
5. Titanium (IV) ions give an orange-red colouration in slightly acidic solution with hydrogen peroxide because
of the formation of :
(A) peroxo disulphatotitanium (IV) ions (B) peroxo disulphatotitanium (II) ions
(C) titanium (IV) sulphate (D) none of these
Ans. (A)
Sol. Thecolour is attributedtoperoxotitanic acid, HCOO-Ti(OH)
3
or peroxodisulphatotitanium(IV) ions, [TiO
2
(SO
4
)
2
]
2
6. Aqueous solution of Na
2
S
2
O
3
gives white precipitate with Ag
+
ions; the precipitate dissolves in excess of
Na
2
S
2
O
3
solution. If the precipitate is boiled with water it changes to black and the supernatant liquid then
gives a white precipitate with a solution containing Ba
2+
ions. Explain by writing the chemical equations
involved.
Sol. 2Ag
+
+ S
2
O
3
2
Ag
2
S
2
O
3
+ (white) ; Ag
2
S
2
O
3
+ 3S
2
O
3
2
2[Ag(S
2
O
3
)
2
]
3
Ag
2
S
2
O
3
+ + H
2
O
boiled
AgS + (black) + H
2
SO
4
; H
2
SO
4
+ Ba
2+
BaSO
4
+ (white) + 2H
+
7. When metallic copper is heated with concentrated sulphuric acid, in addition to copper (II) sulphate, CuSO
4
and sulphur dioxides SO
2
, some copper (II) sulphide, CuS, is also formed. Explain.
Sol. With concentrated H
2
SO
4
, Cu is oxidised to Cu
2+
and SO
4
2
is reduced to SO
2
.
Cu Cu
2+
+ 2e
; SO
4
2
+ 4H
+
+ 2e
SO
2
+ 2H
2
O
A side reaction also occurs due to very high [H
+
] and very low solubility of CuS according to the following
chemical equation.
SO
4
2
+ 8H
+
+ 8e
S
2
+ 4H
2
O
"manishkumarphysics.in"
35
CHEMISTRY
8. Which of the following product(s) is/are obtained when Na
2
S
2
O
4
(solid) is heated at about 190C ?
(A) Na
2
SO
4
(B) Na
2
SO
3
(C) Na
2
S
2
O
3
(D) SO
2
Ans. (B,D)
Sol. 2Na
2
S
2
O
4
Na
2
O
3
+ Na
2
S
2
O
3
+ SO
2
|.
9. HNO
3
can not be used for the preparation of H
2
S from metal sulphides. Why ?
Sol. FeS + 2H
+
Fe
2+
+ H
2
S
HNO
3
being strong oxidising agent oxidises H
2
S to sulphur.
2HNO
3
2NO
2
+ H
2
O + [O] ; H
2
S + [O] H
2
O + S
10. Potassium cyanide is made alkaline with NaOH and then is boiled with thiosulphate ions. The solution is
cooled and acidified with HCl. This solution with iron (III) chloride produces :
(A) prussian blue colour solution. (B) deep red colour solution.
(C) brown colour solution. (D) green colour solution.
Ans. (B)
Sol. (i) S
2
O
3
2
+ CN
NaOH
SCN
+ SO
3
2
(ii) 3SCN
+ Fe
3+
+
H
Fe(SCN)
3
(red colouration)
11. Howwill you obtain sodiumthiosulphate fromaqueous solution of Na
2
CO
3
using SO
2
gas and sulphur ? (only
in three steps)
Sol. Na
2
CO
3
+ 2SO
2
2NaHSO
3
+ CO
2
2NaHSO
3
+ Na
2
CO
3
2Na
2
SO
3
+ CO
2
+ H
2
O
Na
2
SO
3
+ S
A
Na
2
S
2
O
3