This document provides technical specifications for a combined heat and power plant, including:
- The plant has a gross electrical output of 912 MWe and can provide up to 1.2 MWe of maximum district heating.
- The steam turbine has a steam inlet of 300°C/2.4 bar and a reheat steam parameter of 250°C/4 bar, driving a generator with an active power of 910 MW.
- Flue gas cleaning systems generate 110.2 t/h of fly ash and produces 26.8 t/h of gypsum. Emission controls limit sulfur oxides to 200 mg/Nm3, nitrogen oxides to 100 mg/Nm3, and carbon
This document provides technical specifications for a combined heat and power plant, including:
- The plant has a gross electrical output of 912 MWe and can provide up to 1.2 MWe of maximum district heating.
- The steam turbine has a steam inlet of 300°C/2.4 bar and a reheat steam parameter of 250°C/4 bar, driving a generator with an active power of 910 MW.
- Flue gas cleaning systems generate 110.2 t/h of fly ash and produces 26.8 t/h of gypsum. Emission controls limit sulfur oxides to 200 mg/Nm3, nitrogen oxides to 100 mg/Nm3, and carbon
This document provides technical specifications for a combined heat and power plant, including:
- The plant has a gross electrical output of 912 MWe and can provide up to 1.2 MWe of maximum district heating.
- The steam turbine has a steam inlet of 300°C/2.4 bar and a reheat steam parameter of 250°C/4 bar, driving a generator with an active power of 910 MW.
- Flue gas cleaning systems generate 110.2 t/h of fly ash and produces 26.8 t/h of gypsum. Emission controls limit sulfur oxides to 200 mg/Nm3, nitrogen oxides to 100 mg/Nm3, and carbon
This document provides technical specifications for a combined heat and power plant, including:
- The plant has a gross electrical output of 912 MWe and can provide up to 1.2 MWe of maximum district heating.
- The steam turbine has a steam inlet of 300°C/2.4 bar and a reheat steam parameter of 250°C/4 bar, driving a generator with an active power of 910 MW.
- Flue gas cleaning systems generate 110.2 t/h of fly ash and produces 26.8 t/h of gypsum. Emission controls limit sulfur oxides to 200 mg/Nm3, nitrogen oxides to 100 mg/Nm3, and carbon
Download as DOC, PDF, TXT or read online from Scribd
Download as doc, pdf, or txt
You are on page 1of 2
Block data in once-through cooling
Gross electrical power
water turbine Maximum district heating net efciency Efciency in district heating Carbon storage capacity 912 MWe up to 1. MWe 22! MWth " #$% up to &% #&!'!!! t Steam generator (ated thermal input )gnition tap *ring +uel consumption o, coal -.ry/ 0ue gas 1olume 0ow +iring auxiliary steam generator 1'999 MWth 2/ heating oil E3 414 t 5 h 2/ 2'4$!'!!! 6m4 5 h 2/ 4 x 2 MWth Steam turbine generator 7team parameters 5 lot high8pressure 7team parameters reheat Generator acti1e 5 apparent power Cooling water 0ow rate $!! 9 C 5 2:& bar 5 2'4#: t 5 h $2! 9 C 5 & bar 9#! MW 5 1'1:& M;< 2#82: m4 5 s -combined se=uential 5 >hrough cooling/ Flue gas cleaning Generated 0y ash ?roduced gypsum -wet/ 3imestone consumption ammonia consumption #!.2 t 5 h 2/ 2:.$ t 5 h 2/ 1&. t 5 h 2/ !.&& t 5 h 2/ emission limits 7ul,ur oxides -7@x/ 6itrogen oxides -6@x/ Carbon monoxide -C@/ dust <nnual mean 1alues 22/ 11! mg 5 6m4 1!! mg 5 6m4 1!! mg 5 6m4 1! mg 5 6m4 2/ Aased on the maximum boiler output. >his corresponds to a gross electrical output o, 94: MW. 22/ .aily mean 1alues according to the 14th +ederal Emission ?rotection @rdinance -@rdinance on 3arge Combustion and gas turbine plants/.
Gas-Engines and Producer-Gas Plants
A Practice Treatise Setting Forth the Principles of Gas-Engines and Producer Design, the Selection and Installation of an Engine, Conditions of Perfect Operation, Producer-Gas Engines and Their Possibilities, the Care of Gas-Engines and Producer-Gas Plants, with a Chapter on Volatile Hydrocarbon and Oil Engines