Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 723 views

    J616V01 en

    Uploaded by

    Martin Kratky
    The document provides a technical specification for the Jenbacher JMS 616 GS-N.L natural gas engine generator set. It lists the electrical output as 2.433 kW, fueled by natural gas, and includes dimensions and connection details. The specification also describes the genset, module, and heat recovery module configurations and their standard equipment and controls.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    J616V01 en

    Uploaded by

    Martin Kratky
    723 views4 pages
    The document provides a technical specification for the Jenbacher JMS 616 GS-N.L natural gas engine generator set. It lists the electrical output as 2.433 kW, fueled by natural gas, and includes dimensions and connection details. The specification also describes the genset, module, and heat recovery module configurations and their standard equipment and controls.

    Original Description:

    GE Jenbacher engine

    Original Title

    J616V01_en

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides a technical specification for the Jenbacher JMS 616 GS-N.L natural gas engine generator set. It lists the electrical output as 2.433 kW, fueled by natural gas, and includes dimensions and connection details. The specification also describes the genset, module, and heat recovery module configurations and their standard equipment and controls.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    723 views4 pages

    J616V01 en

    Uploaded by

    Martin Kratky
    The document provides a technical specification for the Jenbacher JMS 616 GS-N.L natural gas engine generator set. It lists the electrical output as 2.433 kW, fueled by natural gas, and includes dimensions and connection details. The specification also describes the genset, module, and heat recovery module configurations and their standard equipment and controls.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4
    At a glance
    Powered by AI
    The document provides technical specifications for a Jenbacher JMS 616 GS-N.L natural gas engine, including its electrical output, emissions levels, dimensions, and other details.

    It is a Jenbacher J 616 GS-E01 natural gas engine made up of 16 cylinders in a V60° configuration with a displacement of 99.80 liters.

    It lists the basic engine equipment such as the exhaust gas turbocharger and intercooler. It also describes the engine accessories like the electric starter motor and electronic speed governor. The control equipment and gas train are also outlined.

    Jenbacher gas engines Technical Specification

    JMS 616 GS-N.L


    Natural gas 2.433kW el.

    GE Jenbacher GmbH & Co OHG A-6200 Jenbach, Austria

    Tel. +43 5244 600-0 Fax +43 5244 63255

    http://information.jenbacher.com jenbacher.info@ge.com

    Jenbacher gas engines Technical Specification

    JMS 616 GS-N.L Natural gas 2.433kW el. CO-GEN Module data:
    Electrical output Recoverable thermal output (120 C) Energy input Fuel Consumption based on a LHV of 9,5 kWh/Nm Electrical efficiency Thermal efficiency Total efficiency Heat to be dissipated (LT-Circuit) Emission values: NOx < 500 mg/Nm (5% O2) Nm/h % % % kW 590 43,4% 42,8% 86,2% 126 kW el. kW kW 2.433 2.399 5.606

    Additional information:
    Sound pressure level (engine, average value 1m) Sound pressure level exhaust gas (1m, 30 off engin Exhaust gas mass flow rate, wet Exhaust gas volume, wet Max.admissible exhaust back pressure after engine Exhaust gas temperature at full load Combustion air mass flow rate Combustion air volume Max. inlet cooling water temp. (intercooler) Max. pressure drop in front of intake-air filter Return temperature Forward temperature Hot water flow rate dB(A) dB(A) kg/h Nm/h mbar C [8] kg/h Nm/h C mbar C C m/h 101 119 13.950 11.001 60 418 13.547 10.480 40 10 70 90 103,0

    Engine data:
    Engine type Configuration No. of cylinders Bore Stroke Piston displacement Nominal speed Mean piston speed Mean effe. press. at stand. power and nom. spe Compression ratio ISO standard fuel stop power ICFN Spec. fuel consumption of engine Specific lube oil consumption Weight dry Filling capacity lube oil Based on methane number|Min. methane numb mm mm lit rpm m/s bar Epsilon kW kWh/kWh g/kWh kg lit MZ
    J 616 GS-E01

    Alternator:
    Manufacturer Type Type rating kVA STAMFORD LVSI 804 W 3.555 V 60 16 190 220 99,80 1.500 11 20,00 11,0 2495 2,25 0,30 10.000 530 94|80 Efficiency at p.f. = 1,0 Efficiency at p.f. = 0,8 Ratings at p.f. = 1,0 Ratings at p.f. = 0,8 Frequency Voltage Protection Class Insulation class Speed Mass rpm kg % % kW kW Hz V 97,5% 96,6% 2.433 2.410 50 690 IP 23 H 1.500 6.752

    Technical parameters:
    Applicable standards: Based on DIN-ISO 3046 Based on VDE 0530 REM with specified tolerance Standard conditions: Air pressure: Air temperature: Relative Humidity: 1000 mbar or 100 m above sea level 25C or 298 K 30%

    Engine output derating:

    for plants installed at > 500m above see level and/or intake temperature > 30C, the reduction of engine power is determined for each project.

    Gas quality:

    according to TA 1000-0300 Gas flow pressure: 80 - 200 mbar (Lower gas pressures upon inquiry) Prechamber gas pressure: 3,0-4,0 bar

    Max. variation in gas pressure: 10%

    All data are based on engine full load at specified media temperatures and are subject to change. The technical Instruction TA 1100-0110 "PARAMETER FOR GE Jenbacher GAS ENGINES" must be strictly observed.

    Jenbacher gas engines Technical Specification


    >>> Scope of supply genset - JGS 616 GS-N.L
    Basic engine equipment:
    *Exhaust gas turbocharger, Intercooler *Motorized carburator for LEANOX control *Electronic contactless high performance ignition system *Lubricating oil pump (gear driven) *Lubricating oil filters in main circuit *Lubricating oil sump; Lubricating oil heat exchanger *Jacket water pump *Fuel-, lubricating oil and jacket water pipe work on engine *Flywheel for alternator operation; Exhaust gas manifold *Viscous damper *Knock sensors

    Module equipment:
    *Base frame for gas engine, alternator and heat exchangers *Internal pole alternator with excitation alternator and with automatic voltage regulator; p.f. 0,8 lagging to 1,0 *Flexible coupling, bell housing *Anti-vibration mounts *Air filter *Automatic lube oil replenishing with level control *Wiring of components to module interface panel *Crankcase breather *Jacket water electric preheating

    Engine accessories:
    *Electric starter motor *Electronic speed governor *Electronic speed monitoring device including starting and overspeed control *Transducers and switches for oil pressure, jacket water temp., jacket water pressure, charge pressure and mixture temperature *One thermocouple per cylinder

    Module control panel:


    *Totally enclosed , single door cubicle, wired to terminals and ready to operate, protection IP 41 outside, IP 10 inside, according to VDE-standards

    Control equipment:
    *Engine-Management-System dia.ne (Dialog Network) **Visualisation (industry PC-10'' color graphics display): Operation data, controller display,Exh. gas temp.,Generator electr. connection,etc. **Central engine- and module control: Speed-, Power output-, LEANOX-Control and knock control, etc. *Multi-transducer *Lockable operation mode selector switch Positions: "OFF", "MANUAL", "AUTOMATIC" *Demand switch

    Supplied loose:
    Gas train according to DIN-DVGW consisting of: *Manual stop valve, fuel gas filter, two solenoid valves, Leakage control device, gas pressure regulator Prechamber Gas Train

    Documentation:
    *Operating and maintenance manual *Spare parts manual *Drawings Assembly, painting, testing in Jenbach/Austria

    >>> Scope of supply module - JMS 616 GS-N.L


    Identical to Genset except that heat recovery is included. *jacket water heat exchanger mounted on module frame *exhaust gas heat exchanger mounted as separate heat recovery module *all heat exchangers with complete pipework *Heat exchangers and all inherent auxiliaries

    Scope of Supply & Design Subject to Local Regulations and product development

    Jenbacher gas engines Technical Specification

    Genset

    Main dimensions and weights (approximate value)


    Length L Width B Height H Weight empty Weight filled mm mm mm kg kg 8.300 2.200 2.800 23.300 24.300

    Connections (at genset)


    Jacket water inlet and outlet Exhaust gas outlet Fuel gas (at gas train) Intercooler water connection: Low Temperature Circuit DN/PN 65/10 DN/PN DN/PN DN/PN 100/10 600/10 100/16

    Module

    Main dimensions and weights (approximate value)


    Length L Width B Height H Weight empty Weight filled mm mm mm kg kg 8.300 2.200 2.800 23.800 24.800

    Connections (at module)


    Hot water inlet and outlet Exhaust gas outlet Fuel gas (at gas train) Intercooler water connection: Intercooler water-Inlet/Outlet 2nd stage DN/PN 65/10 DN/PN DN/PN DN/PN 100/10 600/10 100/16

    Heat recovery module

    Main dimensions and weights (approximate value)


    Width B Height H Length L mm mm mm 1.962 4.600 5.800

    Connections (on heat recovery module)


    Hot water inlet and outlet Exhaust gas outlet Condensate drain Drain line DN/PN DN/PN DN/PN '' 100/10 600/10 65/10 ''

    GE Jenbacher GmbH & Co OHG A-6200 Jenbach, Austria

    Tel. +43 5244 600-0 Fax +43 5244 63255

    http://information.jenbacher.com jenbacher.info@ge.com

    04. Jul 2006

    You might also like