Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 231 views

    J316V21 en

    Uploaded by

    Martin Kratky
    This document provides the technical specifications for a Jenbacher JMS 316 GS-B.L biogas generator set that produces 834 kW of electricity. It lists the electrical output, fuel consumption, emissions levels, dimensions, and connections for the generator set, as well as optional module and container configurations. The generator set uses a Jenbacher J 316 GS-C21 gas engine paired with a Stamford alternator to convert biogas into electricity in an efficient combined heat and power application.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    J316V21 en

    Uploaded by

    Martin Kratky
    231 views4 pages
    This document provides the technical specifications for a Jenbacher JMS 316 GS-B.L biogas generator set that produces 834 kW of electricity. It lists the electrical output, fuel consumption, emissions levels, dimensions, and connections for the generator set, as well as optional module and container configurations. The generator set uses a Jenbacher J 316 GS-C21 gas engine paired with a Stamford alternator to convert biogas into electricity in an efficient combined heat and power application.

    Original Description:

    Data sheet

    Original Title

    J316V21_en

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides the technical specifications for a Jenbacher JMS 316 GS-B.L biogas generator set that produces 834 kW of electricity. It lists the electrical output, fuel consumption, emissions levels, dimensions, and connections for the generator set, as well as optional module and container configurations. The generator set uses a Jenbacher J 316 GS-C21 gas engine paired with a Stamford alternator to convert biogas into electricity in an efficient combined heat and power application.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    231 views4 pages

    J316V21 en

    Uploaded by

    Martin Kratky
    This document provides the technical specifications for a Jenbacher JMS 316 GS-B.L biogas generator set that produces 834 kW of electricity. It lists the electrical output, fuel consumption, emissions levels, dimensions, and connections for the generator set, as well as optional module and container configurations. The generator set uses a Jenbacher J 316 GS-C21 gas engine paired with a Stamford alternator to convert biogas into electricity in an efficient combined heat and power application.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Jenbacher gas engines Technical Specification

    JMS 316 GS-B.L


    Biogas 834kW el.

    GE Jenbacher GmbH & Co OHG A-6200 Jenbach, Austria

    Tel. +43 5244 600-0 Fax +43 5244 63255

    http://information.jenbacher.com jenbacher.info@ge.com

    Jenbacher gas engines Technical Specification

    JMS 316 GS-B.L Biogas 834kW el. CO-GEN Module data:


    Electrical output Recoverable thermal output (180 C) Energy input Fuel Consumption based on a LHV of 5 kWh/Nm Electrical efficiency Thermal efficiency Total efficiency Heat to be dissipated (LT-Circuit) Emission values: NOx < 500 mg/Nm (5% O2) Nm/h % % % kW 419 39,8% 43,9% 83,7% 37 kW el. kW kW 834 921 2.096

    Additional information:
    Sound pressure level (engine, average value 1m) Sound pressure level exhaust gas (1m, 30 off engin Exhaust gas mass flow rate, wet Exhaust gas volume, wet Max.admissible exhaust back pressure after engine Exhaust gas temperature at full load Combustion air mass flow rate Combustion air volume Max. inlet cooling water temp. (intercooler) Max. pressure drop in front of intake-air filter Return temperature Forward temperature Hot water flow rate dB(A) dB(A) kg/h Nm/h mbar C [8] kg/h Nm/h C mbar C C m/h 96 116 4.459 3.468 60 508 4.085 3.160 50 10 70 90 39,5

    Engine data:
    Engine type Configuration No. of cylinders Bore Stroke Piston displacement Nominal speed Mean piston speed Mean effe. press. at stand. power and nom. spe Compression ratio ISO standard fuel stop power ICFN Spec. fuel consumption of engine Specific lube oil consumption Weight dry Filling capacity lube oil Based on methane number mm mm lit rpm m/s bar Epsilon kW kWh/kWh g/kWh kg lit MZ
    J 316 GS-C21

    Alternator:
    Manufacturer Type Type rating kVA STAMFORD PE 734 B2 1.400 V 70 16 135 170 38,93 1.500 8,5 17,70 11,8 861 2,43 0,30 4.000 300 100 Efficiency at p.f. = 1,0 Efficiency at p.f. = 0,8 Ratings at p.f. = 1,0 Ratings at p.f. = 0,8 Frequency Voltage Protection Class Insulation class Speed Mass rpm kg % % kW kW Hz V 96,9% 95,8% 834 825 50 400 IP 23 H 1.500 2.710

    Technical parameters:
    Applicable standards: Based on DIN-ISO 3046 Based on VDE 0530 REM with specified tolerance Standard conditions: Air pressure: Air temperature: Relative Humidity: 1000 mbar or 100 m above sea level 25C or 298 K 30%

    Engine output derating:

    for plants installed at > 500m above see level and/or intake temperature > 30C, the reduction of engine power is determined for each project.

    Gas quality:

    according to TA 1000-0300 Gas flow pressure: 80 - 200 mbar (Lower gas pressures upon inquiry)

    Max. variation in gas pressure: 10%

    All data are based on engine full load at specified media temperatures and are subject to change. The technical Instruction TA 1100-0110 "PARAMETER FOR GE Jenbacher GAS ENGINES" must be strictly observed.

    Jenbacher gas engines Technical Specification


    >>> Scope of supply genset - JGS 316 GS-B.L
    Basic engine equipment:
    *Exhaust gas turbocharger, Intercooler *Motorized carburator for LEANOX control *Electronic contactless high performance ignition system *Lubricating oil pump (gear driven) *Lubricating oil filters in main circuit *Lubricating oil sump; Lubricating oil heat exchanger *Jacket water pump *Fuel-, lubricating oil and jacket water pipe work on engine *Flywheel for alternator operation; Exhaust gas manifold *Viscous damper *Knock sensors

    Module equipment:
    *Base frame for gas engine, alternator and heat exchangers *Internal pole alternator with excitation alternator and with automatic voltage regulator; p.f. 0,8 lagging to 1,0 *Flexible coupling, bell housing *Anti-vibration mounts *Air filter *Automatic lube oil replenishing with level control *Wiring of components to module interface panel *Crankcase breather *Jacket water electric preheating

    Engine accessories:
    *Electric starter motor *Electronic speed governor *Electronic speed monitoring device including starting and overspeed control *Transducers and switches for oil pressure, jacket water temp., jacket water pressure, charge pressure and mixture temperature *One thermocouple per cylinder

    Module control panel:


    *Totally enclosed , single door cubicle, wired to terminals and ready to operate, protection IP 41 outside, IP 10 inside, according to VDE-standards

    Control equipment:
    *Engine-Management-System dia.ne (Dialog Network) **Visualisation (industry PC-10'' color graphics display): Operation data, controller display,Exh. gas temp.,Generator electr. connection,etc. **Central engine- and module control: Speed-, Power output-, LEANOX-Control and knock control, etc. *Multi-transducer *Lockable operation mode selector switch Positions: "OFF", "MANUAL", "AUTOMATIC" *Demand switch

    Supplied loose:
    Gas train according to DIN-DVGW consisting of: *Manual stop valve, fuel gas filter, two solenoid valves, Leakage control device, gas pressure regulator

    Documentation:
    *Operating and maintenance manual *Spare parts manual *Drawings Assembly, painting, testing in Jenbach/Austria

    >>> Scope of supply module - JMS 316 GS-B.L


    Identical to Genset except that heat recovery is included. *jacket water heat exchanger mounted on module frame *exhaust gas heat exchanger mounted on module frame; *all heat exchangers with complete pipework *Heat exchangers and all inherent auxiliaries

    >>> Scope of supply container - JG(M)C 316 GS-B.L


    *Identical to module/genset but installed in 40' ISO container (65 dB(A) @ 10m); complete with all pipework and fittings *Twin circuit radation cooler for dissipation of intercooler jacket water and lube oil thermal output; ventilation equipment *Gas & smoke detectors; exhaust silencer; lube oil equipment; starting system; flexible connections *Seperate control room complete with generator switchgear and all internal power and monitoring cables

    Scope of Supply & Design Subject to Local Regulations and product development

    Jenbacher gas engines Technical Specification

    Genset

    Main dimensions and weights (approximate value)


    Length L Width B Height H Weight empty Weight filled mm mm mm kg kg 5.200 1.800 2.300 9.000 9.600

    Connections (at genset)


    Jacket water inlet and outlet Exhaust gas outlet Fuel gas (at gas train) Intercooler water connection: Low Temperature Circuit DN/PN 65/10 DN/PN DN/PN DN/PN 80/10 250/10 80-100/16

    Module

    Main dimensions and weights (approximate value)


    Length L Width B Height H Weight empty Weight filled mm mm mm kg kg 5.300 2.300 2.300 10.100 10.700

    Connections (at module)


    Hot water inlet and outlet Exhaust gas outlet Fuel gas (at gas train) Intercooler water connection: Intercooler water-Inlet/Outlet 2nd stage DN/PN 65/10 DN/PN DN/PN DN/PN 80/10 250/10 80-100/16

    Container

    Main dimensions and weights (approximate value)


    Length L Width B Height H Container weight (dry) Container weight (filled) mm mm mm kg kg 12.200 2.500 2.600 23.400 24.700

    Connections (container)
    Jacket water inlet and outlet Exhaust gas outlet Fuel gas connection (container) Fresh oil connection DN/PN DN/PN mm G 80/10 250/10 100/16 28x2''

    GE Jenbacher GmbH & Co OHG A-6200 Jenbach, Austria

    Tel. +43 5244 600-0 Fax +43 5244 63255

    http://information.jenbacher.com jenbacher.info@ge.com

    04. Jul 2006

    You might also like